kernel 5.19.12

6 files changed, 345 insertions, 152 deletions

diff --git a/SOURCES/ACPI:-processor-idle:-Practically-limit-Dummy-wait-workaround-to-old-Intel-systems.patch b/SOURCES/ACPI:-processor-idle:-Practically-limit-Dummy-wait-workaround-to-old-Intel-systems.patch
new file mode 100644
index 0000000..02b667c
--- /dev/null
+++ b/SOURCES/ACPI:-processor-idle:-Practically-limit-Dummy-wait-workaround-to-old-Intel-systems.patch
@@ -0,0 +1,77 @@
+From e400ad8b7e6a1b9102123c6240289a811501f7d9 Mon Sep 17 00:00:00 2001
+From: Dave Hansen <dave.hansen@intel.com>
+Date: Thu, 22 Sep 2022 11:47:45 -0700
+Subject: ACPI: processor idle: Practically limit "Dummy wait" workaround to
+ old Intel systems
+
+Old, circa 2002 chipsets have a bug: they don't go idle when they are
+supposed to.  So, a workaround was added to slow the CPU down and
+ensure that the CPU waits a bit for the chipset to actually go idle.
+This workaround is ancient and has been in place in some form since
+the original kernel ACPI implementation.
+
+But, this workaround is very painful on modern systems.  The "inl()"
+can take thousands of cycles (see Link: for some more detailed
+numbers and some fun kernel archaeology).
+
+First and foremost, modern systems should not be using this code.
+Typical Intel systems have not used it in over a decade because it is
+horribly inferior to MWAIT-based idle.
+
+Despite this, people do seem to be tripping over this workaround on
+AMD system today.
+
+Limit the "dummy wait" workaround to Intel systems.  Keep Modern AMD
+systems from tripping over the workaround.  Remotely modern Intel
+systems use intel_idle instead of this code and will, in practice,
+remain unaffected by the dummy wait.
+
+Reported-by: K Prateek Nayak <kprateek.nayak@amd.com>
+Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
+Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
+Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
+Link: https://lore.kernel.org/all/20220921063638.2489-1-kprateek.nayak@amd.com/
+Link: https://lkml.kernel.org/r/20220922184745.3252932-1-dave.hansen@intel.com
+---
+ drivers/acpi/processor_idle.c | 23 ++++++++++++++++++++---
+ 1 file changed, 20 insertions(+), 3 deletions(-)
+
+diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
+index 16a1663d02d46..9f40917c49efb 100644
+--- a/drivers/acpi/processor_idle.c
++++ b/drivers/acpi/processor_idle.c
+@@ -531,10 +531,27 @@ static void wait_for_freeze(void)
+ 	/* No delay is needed if we are in guest */
+ 	if (boot_cpu_has(X86_FEATURE_HYPERVISOR))
+ 		return;
++	/*
++	 * Modern (>=Nehalem) Intel systems use ACPI via intel_idle,
++	 * not this code.  Assume that any Intel systems using this
++	 * are ancient and may need the dummy wait.  This also assumes
++	 * that the motivating chipset issue was Intel-only.
++	 */
++	if (boot_cpu_data.x86_vendor != X86_VENDOR_INTEL)
++		return;
+ #endif
+-	/* Dummy wait op - must do something useless after P_LVL2 read
+-	   because chipsets cannot guarantee that STPCLK# signal
+-	   gets asserted in time to freeze execution properly. */
++	/*
++	 * Dummy wait op - must do something useless after P_LVL2 read
++	 * because chipsets cannot guarantee that STPCLK# signal gets
++	 * asserted in time to freeze execution properly
++	 *
++	 * This workaround has been in place since the original ACPI
++	 * implementation was merged, circa 2002.
++	 *
++	 * If a profile is pointing to this instruction, please first
++	 * consider moving your system to a more modern idle
++	 * mechanism.
++	 */
+ 	inl(acpi_gbl_FADT.xpm_timer_block.address);
+ }
+ 
+-- 
+cgit 
+
diff --git a/SOURCES/ALSA:-usb-audio:-Split-endpoint-setups-for-hw_params-and-prepare.patch b/SOURCES/ALSA:-usb-audio:-Split-endpoint-setups-for-hw_params-and-prepare.patch
new file mode 100644
index 0000000..d23deb0
--- /dev/null
+++ b/SOURCES/ALSA:-usb-audio:-Split-endpoint-setups-for-hw_params-and-prepare.patch
@@ -0,0 +1,200 @@
+From 271f862ebc60b3a7ff1563654eb33cd4571c66aa Mon Sep 17 00:00:00 2001
+From: Takashi Iwai <tiwai@suse.de>
+Date: Thu, 1 Sep 2022 14:41:36 +0200
+Subject: ALSA: usb-audio: Split endpoint setups for hw_params and prepare
+
+commit ff878b408a03bef5d610b7e2302702e16a53636e upstream.
+
+One of the former changes for the endpoint management was the more
+consistent setup of endpoints at hw_params.
+snd_usb_endpoint_configure() is a single function that does the full
+setup, and it's called from both PCM hw_params and prepare callbacks.
+Although the EP setup at the prepare phase is usually skipped (by
+checking need_setup flag), it may be still effective in some cases
+like suspend/resume that requires the interface setup again.
+
+As it's a full and single setup, the invocation of
+snd_usb_endpoint_configure() includes not only the USB interface setup
+but also the buffer release and allocation.  OTOH, doing the buffer
+release and re-allocation at PCM prepare phase is rather superfluous,
+and better to be done only in the hw_params phase.
+
+For those optimizations, this patch splits the endpoint setup to two
+phases: snd_usb_endpoint_set_params() and snd_usb_endpoint_prepare(),
+to be called from hw_params and from prepare, respectively.
+
+Note that this patch changes the driver operation slightly,
+effectively moving the USB interface setup again to PCM prepare stage
+instead of hw_params stage, while the buffer allocation and such
+initializations are still done at hw_params stage.
+
+And, the change of the USB interface setup timing (moving to prepare)
+gave an interesting "fix", too: it was reported that the recent
+kernels caused silent output at the beginning on playbacks on some
+devices on Android, and this change casually fixed the regression.
+It seems that those devices are picky about the sample rate change (or
+the interface change?), and don't follow the too immediate rate
+changes.
+
+Meanwhile, Android operates the PCM in the following order:
+- open, then hw_params with the possibly highest sample rate
+- close without prepare
+- re-open, hw_params with the normal sample rate
+- prepare, and start streaming
+This procedure ended up the hw_params twice with different rates, and
+because the recent kernel did set up the sample rate twice one and
+after, it screwed up the device.  OTOH, the earlier kernels didn't set
+up the USB interface at hw_params, hence this problem didn't appear.
+
+Now, with this patch, the USB interface setup is again back to the
+prepare phase, and it works around the problem automagically.
+Although we should address the sample rate problem in a more solid
+way in future, let's keep things working as before for now.
+
+Fixes: bf6313a0ff76 ("ALSA: usb-audio: Refactor endpoint management")
+Cc: <stable@vger.kernel.org>
+Reported-by: chihhao chen <chihhao.chen@mediatek.com>
+Link: https://lore.kernel.org/r/87e6d6ae69d68dc588ac9acc8c0f24d6188375c3.camel@mediatek.com
+Link: https://lore.kernel.org/r/20220901124136.4984-1-tiwai@suse.de
+Signed-off-by: Takashi Iwai <tiwai@suse.de>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ sound/usb/endpoint.c | 23 +++++++++--------------
+ sound/usb/endpoint.h |  6 ++++--
+ sound/usb/pcm.c      | 14 ++++++++++----
+ 3 files changed, 23 insertions(+), 20 deletions(-)
+
+diff --git a/sound/usb/endpoint.c b/sound/usb/endpoint.c
+index f9c921683948d..ff9c7bbbc43fe 100644
+--- a/sound/usb/endpoint.c
++++ b/sound/usb/endpoint.c
+@@ -758,7 +758,8 @@ bool snd_usb_endpoint_compatible(struct snd_usb_audio *chip,
+  * The endpoint needs to be closed via snd_usb_endpoint_close() later.
+  *
+  * Note that this function doesn't configure the endpoint.  The substream
+- * needs to set it up later via snd_usb_endpoint_configure().
++ * needs to set it up later via snd_usb_endpoint_set_params() and
++ * snd_usb_endpoint_prepare().
+  */
+ struct snd_usb_endpoint *
+ snd_usb_endpoint_open(struct snd_usb_audio *chip,
+@@ -1290,12 +1291,13 @@ out_of_memory:
+ /*
+  * snd_usb_endpoint_set_params: configure an snd_usb_endpoint
+  *
++ * It's called either from hw_params callback.
+  * Determine the number of URBs to be used on this endpoint.
+  * An endpoint must be configured before it can be started.
+  * An endpoint that is already running can not be reconfigured.
+  */
+-static int snd_usb_endpoint_set_params(struct snd_usb_audio *chip,
+-				       struct snd_usb_endpoint *ep)
++int snd_usb_endpoint_set_params(struct snd_usb_audio *chip,
++				struct snd_usb_endpoint *ep)
+ {
+ 	const struct audioformat *fmt = ep->cur_audiofmt;
+ 	int err;
+@@ -1378,18 +1380,18 @@ static int init_sample_rate(struct snd_usb_audio *chip,
+ }
+ 
+ /*
+- * snd_usb_endpoint_configure: Configure the endpoint
++ * snd_usb_endpoint_prepare: Prepare the endpoint
+  *
+  * This function sets up the EP to be fully usable state.
+- * It's called either from hw_params or prepare callback.
++ * It's called either from prepare callback.
+  * The function checks need_setup flag, and performs nothing unless needed,
+  * so it's safe to call this multiple times.
+  *
+  * This returns zero if unchanged, 1 if the configuration has changed,
+  * or a negative error code.
+  */
+-int snd_usb_endpoint_configure(struct snd_usb_audio *chip,
+-			       struct snd_usb_endpoint *ep)
++int snd_usb_endpoint_prepare(struct snd_usb_audio *chip,
++			     struct snd_usb_endpoint *ep)
+ {
+ 	bool iface_first;
+ 	int err = 0;
+@@ -1410,9 +1412,6 @@ int snd_usb_endpoint_configure(struct snd_usb_audio *chip,
+ 			if (err < 0)
+ 				goto unlock;
+ 		}
+-		err = snd_usb_endpoint_set_params(chip, ep);
+-		if (err < 0)
+-			goto unlock;
+ 		goto done;
+ 	}
+ 
+@@ -1440,10 +1439,6 @@ int snd_usb_endpoint_configure(struct snd_usb_audio *chip,
+ 	if (err < 0)
+ 		goto unlock;
+ 
+-	err = snd_usb_endpoint_set_params(chip, ep);
+-	if (err < 0)
+-		goto unlock;
+-
+ 	err = snd_usb_select_mode_quirk(chip, ep->cur_audiofmt);
+ 	if (err < 0)
+ 		goto unlock;
+diff --git a/sound/usb/endpoint.h b/sound/usb/endpoint.h
+index 6a9af04cf175a..e67ea28faa54f 100644
+--- a/sound/usb/endpoint.h
++++ b/sound/usb/endpoint.h
+@@ -17,8 +17,10 @@ snd_usb_endpoint_open(struct snd_usb_audio *chip,
+ 		      bool is_sync_ep);
+ void snd_usb_endpoint_close(struct snd_usb_audio *chip,
+ 			    struct snd_usb_endpoint *ep);
+-int snd_usb_endpoint_configure(struct snd_usb_audio *chip,
+-			       struct snd_usb_endpoint *ep);
++int snd_usb_endpoint_set_params(struct snd_usb_audio *chip,
++				struct snd_usb_endpoint *ep);
++int snd_usb_endpoint_prepare(struct snd_usb_audio *chip,
++			     struct snd_usb_endpoint *ep);
+ int snd_usb_endpoint_get_clock_rate(struct snd_usb_audio *chip, int clock);
+ 
+ bool snd_usb_endpoint_compatible(struct snd_usb_audio *chip,
+diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c
+index e692ae04436a5..02035b545f9dd 100644
+--- a/sound/usb/pcm.c
++++ b/sound/usb/pcm.c
+@@ -443,17 +443,17 @@ static int configure_endpoints(struct snd_usb_audio *chip,
+ 		if (stop_endpoints(subs, false))
+ 			sync_pending_stops(subs);
+ 		if (subs->sync_endpoint) {
+-			err = snd_usb_endpoint_configure(chip, subs->sync_endpoint);
++			err = snd_usb_endpoint_prepare(chip, subs->sync_endpoint);
+ 			if (err < 0)
+ 				return err;
+ 		}
+-		err = snd_usb_endpoint_configure(chip, subs->data_endpoint);
++		err = snd_usb_endpoint_prepare(chip, subs->data_endpoint);
+ 		if (err < 0)
+ 			return err;
+ 		snd_usb_set_format_quirk(subs, subs->cur_audiofmt);
+ 	} else {
+ 		if (subs->sync_endpoint) {
+-			err = snd_usb_endpoint_configure(chip, subs->sync_endpoint);
++			err = snd_usb_endpoint_prepare(chip, subs->sync_endpoint);
+ 			if (err < 0)
+ 				return err;
+ 		}
+@@ -551,7 +551,13 @@ static int snd_usb_hw_params(struct snd_pcm_substream *substream,
+ 	subs->cur_audiofmt = fmt;
+ 	mutex_unlock(&chip->mutex);
+ 
+-	ret = configure_endpoints(chip, subs);
++	if (subs->sync_endpoint) {
++		ret = snd_usb_endpoint_set_params(chip, subs->sync_endpoint);
++		if (ret < 0)
++			goto unlock;
++	}
++
++	ret = snd_usb_endpoint_set_params(chip, subs->data_endpoint);
+ 
+  unlock:
+ 	if (ret < 0)
+-- 
+cgit 
+
diff --git a/SOURCES/asus-linux.patch b/SOURCES/asus-linux.patch
index 12f4922..565a7c7 100644
--- a/SOURCES/asus-linux.patch
+++ b/SOURCES/asus-linux.patch
@@ -1828,120 +1828,6 @@ index d71daa024752..0f9f79f249c7 100644
 -- 
 2.37.2
 
-From 79dd1bb11d84054aca1587f366e7c5d72da1e906 Mon Sep 17 00:00:00 2001
-From: "Luke D. Jones" <luke@ljones.dev>
-Date: Thu, 4 Aug 2022 14:14:45 +1200
-Subject: [PATCH 15/19] sound: realtek: Add pincfg for ASUS G533Z
-
-Fixes up the pincfg for ASUS ROG Strix G15 (G533Z) laptop.
-
-Signed-off-by: Luke D. Jones <luke@ljones.dev>
----
- sound/pci/hda/patch_realtek.c | 15 ++++++++++++++-
- 1 file changed, 14 insertions(+), 1 deletion(-)
-
-diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
-index fd630d62b5a0..e9cad49ee2a5 100644
---- a/sound/pci/hda/patch_realtek.c
-+++ b/sound/pci/hda/patch_realtek.c
-@@ -5828,7 +5828,7 @@ static void alc_fixup_headset_mode_alc255_no_hp_mic(struct hda_codec *codec,
- 		struct alc_spec *spec = codec->spec;
- 		spec->parse_flags |= HDA_PINCFG_HEADSET_MIC;
- 		alc255_set_default_jack_type(codec);
--	} 
-+	}
- 	else
- 		alc_fixup_headset_mode(codec, fix, action);
- }
-@@ -7022,6 +7022,7 @@ enum {
- 	ALC294_FIXUP_ASUS_GX502_HP,
- 	ALC294_FIXUP_ASUS_GX502_PINS,
- 	ALC294_FIXUP_ASUS_GX502_VERBS,
-+	ALC285_FIXUP_ASUS_G533Z_PINS,
- 	ALC294_FIXUP_ASUS_GU502_HP,
- 	ALC294_FIXUP_ASUS_GU502_PINS,
- 	ALC294_FIXUP_ASUS_GU502_VERBS,
-@@ -8363,6 +8364,17 @@ static const struct hda_fixup alc269_fixups[] = {
- 		.type = HDA_FIXUP_FUNC,
- 		.v.func = alc294_fixup_gu502_hp,
- 	},
-+	[ALC285_FIXUP_ASUS_G533Z_PINS] = {
-+		.type = HDA_FIXUP_PINS,
-+		.v.pins = (const struct hda_pintbl[]) {
-+			{ 0x14, 0x90170120 },
-+			{ 0x19, 0x03A11050 }, /* front HP mic */
-+			{ 0x1B, 0x03A11C30 }, /* rear external mic */
-+			{ 0x21, 0x03211420 }, /* front HP out */
-+			{ }
-+		},
-+		.chained = false,
-+	},
- 	[ALC294_FIXUP_ASUS_COEF_1B] = {
- 		.type = HDA_FIXUP_VERBS,
- 		.v.verbs = (const struct hda_verb[]) {
-@@ -9294,6 +9306,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = {
- 	SND_PCI_QUIRK(0x1043, 0x17d1, "ASUS UX431FL", ALC294_FIXUP_ASUS_DUAL_SPK),
- 	SND_PCI_QUIRK(0x1043, 0x1662, "ASUS GV301QH", ALC294_FIXUP_ASUS_DUAL_SPK),
- 	SND_PCI_QUIRK(0x1043, 0x1881, "ASUS Zephyrus S/M", ALC294_FIXUP_ASUS_GX502_PINS),
-+	SND_PCI_QUIRK(0x1043, 0x1c92, "ASUS ROG Strix G15", ALC285_FIXUP_ASUS_G533Z_PINS),
- 	SND_PCI_QUIRK(0x1043, 0x18b1, "Asus MJ401TA", ALC256_FIXUP_ASUS_HEADSET_MIC),
- 	SND_PCI_QUIRK(0x1043, 0x18f1, "Asus FX505DT", ALC256_FIXUP_ASUS_HEADSET_MIC),
- 	SND_PCI_QUIRK(0x1043, 0x194e, "ASUS UX563FD", ALC294_FIXUP_ASUS_HPE),
--- 
-2.37.2
-
-From 522525c97357f768c0fba8705535766ce2ea467f Mon Sep 17 00:00:00 2001
-From: "Luke D. Jones" <luke@ljones.dev>
-Date: Fri, 12 Aug 2022 13:24:07 +1200
-Subject: [PATCH 16/19] sound: realtek: Add pincfg for ASUS G513
-
-Fixes up the pincfg for ASUS ROG Strix G513
-
-Signed-off-by: Luke D. Jones <luke@ljones.dev>
----
- sound/pci/hda/patch_realtek.c | 12 ++++++++++++
- 1 file changed, 12 insertions(+)
-
-diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
-index e9cad49ee2a5..abf3fb50692a 100644
---- a/sound/pci/hda/patch_realtek.c
-+++ b/sound/pci/hda/patch_realtek.c
-@@ -7023,6 +7023,7 @@ enum {
- 	ALC294_FIXUP_ASUS_GX502_PINS,
- 	ALC294_FIXUP_ASUS_GX502_VERBS,
- 	ALC285_FIXUP_ASUS_G533Z_PINS,
-+	ALC294_FIXUP_ASUS_G513_PINS,
- 	ALC294_FIXUP_ASUS_GU502_HP,
- 	ALC294_FIXUP_ASUS_GU502_PINS,
- 	ALC294_FIXUP_ASUS_GU502_VERBS,
-@@ -8308,6 +8309,16 @@ static const struct hda_fixup alc269_fixups[] = {
- 		.chained = true,
- 		.chain_id = ALC294_FIXUP_ASUS_HEADSET_MIC
- 	},
-+	[ALC294_FIXUP_ASUS_G513_PINS] = {
-+		.type = HDA_FIXUP_PINS,
-+		.v.pins = (const struct hda_pintbl[]) {
-+			{ 0x19, 0x03a11050 }, /* front HP mic */
-+			{ 0x1a, 0x03a11c30 }, /* rear external mic */
-+			{ 0x21, 0x03211420 }, /* front HP out */
-+			{ }
-+		},
-+		.chained = false
-+	},
- 	[ALC294_FIXUP_ASUS_GX502_PINS] = {
- 		.type = HDA_FIXUP_PINS,
- 		.v.pins = (const struct hda_pintbl[]) {
-@@ -9307,6 +9318,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = {
- 	SND_PCI_QUIRK(0x1043, 0x1662, "ASUS GV301QH", ALC294_FIXUP_ASUS_DUAL_SPK),
- 	SND_PCI_QUIRK(0x1043, 0x1881, "ASUS Zephyrus S/M", ALC294_FIXUP_ASUS_GX502_PINS),
- 	SND_PCI_QUIRK(0x1043, 0x1c92, "ASUS ROG Strix G15", ALC285_FIXUP_ASUS_G533Z_PINS),
-+	SND_PCI_QUIRK(0x1043, 0x1e5e, "ASUS ROG Strix G513", ALC294_FIXUP_ASUS_G513_PINS),
- 	SND_PCI_QUIRK(0x1043, 0x18b1, "Asus MJ401TA", ALC256_FIXUP_ASUS_HEADSET_MIC),
- 	SND_PCI_QUIRK(0x1043, 0x18f1, "Asus FX505DT", ALC256_FIXUP_ASUS_HEADSET_MIC),
- 	SND_PCI_QUIRK(0x1043, 0x194e, "ASUS UX563FD", ALC294_FIXUP_ASUS_HPE),
--- 
-2.37.2
-
 From 4e821f67963ae0c4dcceadb561077164da5ac79a Mon Sep 17 00:00:00 2001
 From: "Luke D. Jones" <luke@ljones.dev>
 Date: Fri, 26 Aug 2022 10:32:34 +1200
diff --git a/SOURCES/mt76:-mt7921:-Disable-powersave-features-by-default.patch b/SOURCES/mt76:-mt7921:-Disable-powersave-features-by-default.patch
new file mode 100644
index 0000000..099b4a4
--- /dev/null
+++ b/SOURCES/mt76:-mt7921:-Disable-powersave-features-by-default.patch
@@ -0,0 +1,43 @@
+From ca89780690f7492c2d357e0ed2213a1d027341ae Mon Sep 17 00:00:00 2001
+From: Sultan Alsawaf <sultan@kerneltoast.com>
+Date: Sun, 29 May 2022 01:32:19 -0700
+Subject: [PATCH] mt76: mt7921: Disable powersave features by default
+
+This brings WiFi latency down considerably and makes latency consistent by
+disabling runtime PM and typical powersave features by default. The actual
+power consumption difference is inconsequential on desktops and laptops,
+while the performance difference is monumental. Latencies of 20+ ms are no
+longer observed after this change, and the connection is much more stable.
+
+Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
+---
+ drivers/net/wireless/mediatek/mt76/mt7921/init.c | 9 ++-------
+ 1 file changed, 2 insertions(+), 7 deletions(-)
+
+diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/init.c b/drivers/net/wireless/mediatek/mt76/mt7921/init.c
+index 91fc41922d95..cfa0bb51004d 100644
+--- a/drivers/net/wireless/mediatek/mt76/mt7921/init.c
++++ b/drivers/net/wireless/mediatek/mt76/mt7921/init.c
+@@ -67,7 +67,8 @@
+ 
+ 	wiphy->iface_combinations = if_comb;
+ 	wiphy->flags &= ~(WIPHY_FLAG_IBSS_RSN | WIPHY_FLAG_4ADDR_AP |
+-			  WIPHY_FLAG_4ADDR_STATION);
++			  WIPHY_FLAG_4ADDR_STATION |
++			  WIPHY_FLAG_PS_ON_BY_DEFAULT);
+ 	wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
+ 				 BIT(NL80211_IFTYPE_AP);
+ 	wiphy->n_iface_combinations = ARRAY_SIZE(if_comb);
+@@ -266,12 +267,6 @@ int mt7921_register_device(struct mt7921_dev *dev)
+ 	dev->pm.idle_timeout = MT7921_PM_TIMEOUT;
+ 	dev->pm.stats.last_wake_event = jiffies;
+ 	dev->pm.stats.last_doze_event = jiffies;
+-	if (!mt76_is_usb(&dev->mt76)) {
+-		dev->pm.enable_user = true;
+-		dev->pm.enable = true;
+-		dev->pm.ds_enable_user = true;
+-		dev->pm.ds_enable = true;
+-	}
+ 
+ 	if (!mt76_is_mmio(&dev->mt76))
+ 		hw->extra_tx_headroom += MT_SDIO_TXD_SIZE + MT_SDIO_HDR_SIZE;
diff --git a/SOURCES/patch-5.19-redhat.patch b/SOURCES/patch-5.19-redhat.patch
index 80e5938..0390f3e 100644
--- a/SOURCES/patch-5.19-redhat.patch
+++ b/SOURCES/patch-5.19-redhat.patch
@@ -16,7 +16,6 @@
  arch/s390/kernel/ipl.c                             |   5 +
  arch/s390/kernel/setup.c                           |   4 +
  arch/x86/kernel/setup.c                            |  22 +-
- block/genhd.c                                      |   3 +-
  drivers/acpi/apei/hest.c                           |   8 +
  drivers/acpi/irq.c                                 |  17 +-
  drivers/acpi/scan.c                                |   9 +
@@ -62,7 +61,7 @@
  security/lockdown/Kconfig                          |  13 +
  security/lockdown/lockdown.c                       |   1 +
  security/security.c                                |   6 +
- 64 files changed, 1781 insertions(+), 349 deletions(-)
+ 63 files changed, 1779 insertions(+), 348 deletions(-)
 
 diff --git a/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml b/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml
 index e6485f7b046f..217c42874f41 100644
@@ -254,7 +253,7 @@ index 000000000000..733a26bd887a
 +
 +endmenu
 diff --git a/Makefile b/Makefile
-index 01463a22926d..2cb088d25213 100644
+index 7df4c195c8ab..6adcbebd18ae 100644
 --- a/Makefile
 +++ b/Makefile
 @@ -18,6 +18,10 @@ $(if $(filter __%, $(MAKECMDGOALS)), \
@@ -499,27 +498,6 @@ index bd6c6fd373ae..3333b08a778d 100644
 
  	reserve_initrd();
 
-diff --git a/block/genhd.c b/block/genhd.c
-index 278227ba1d53..e0675772178b 100644
---- a/block/genhd.c
-+++ b/block/genhd.c
-@@ -623,7 +623,6 @@ void del_gendisk(struct gendisk *disk)
- 	 * Prevent new I/O from crossing bio_queue_enter().
- 	 */
- 	blk_queue_start_drain(q);
--	blk_mq_freeze_queue_wait(q);
-
- 	if (!(disk->flags & GENHD_FL_HIDDEN)) {
- 		sysfs_remove_link(&disk_to_dev(disk)->kobj, "bdi");
-@@ -647,6 +646,8 @@ void del_gendisk(struct gendisk *disk)
- 	pm_runtime_set_memalloc_noio(disk_to_dev(disk), false);
- 	device_del(disk_to_dev(disk));
-
-+	blk_mq_freeze_queue_wait(q);
-+
- 	blk_throtl_cancel_bios(disk->queue);
-
- 	blk_sync_queue(q);
 diff --git a/drivers/acpi/apei/hest.c b/drivers/acpi/apei/hest.c
 index 6aef1ee5e1bd..8f146b1b4972 100644
 --- a/drivers/acpi/apei/hest.c
@@ -949,7 +927,7 @@ index 51fcf1298023..7f1097947731 100644
  	/* don't overflow userbuf */
  	len = strlen(value);
 diff --git a/drivers/gpu/drm/i915/display/intel_bios.c b/drivers/gpu/drm/i915/display/intel_bios.c
-index 91caf4523b34..84c086610235 100644
+index b5de61fe9cc6..40ef64a867e4 100644
 --- a/drivers/gpu/drm/i915/display/intel_bios.c
 +++ b/drivers/gpu/drm/i915/display/intel_bios.c
 @@ -332,18 +332,6 @@ static bool fixup_lfp_data_ptrs(const void *bdb, void *ptrs_block)
@@ -1043,10 +1021,10 @@ index 91caf4523b34..84c086610235 100644
 
  	if (16 * (size + table_size) <= block_size) {
 diff --git a/drivers/gpu/drm/i915/display/intel_psr.c b/drivers/gpu/drm/i915/display/intel_psr.c
-index 06db407e2749..36356893c7ca 100644
+index 8f09203e0cf0..7d61c55184e5 100644
 --- a/drivers/gpu/drm/i915/display/intel_psr.c
 +++ b/drivers/gpu/drm/i915/display/intel_psr.c
-@@ -1618,8 +1618,12 @@ static void psr2_man_trk_ctl_calc(struct intel_crtc_state *crtc_state,
+@@ -1624,8 +1624,12 @@ static void psr2_man_trk_ctl_calc(struct intel_crtc_state *crtc_state,
  }
 
  static void clip_area_update(struct drm_rect *overlap_damage_area,
@@ -1060,7 +1038,7 @@ index 06db407e2749..36356893c7ca 100644
  	if (overlap_damage_area->y1 == -1) {
  		overlap_damage_area->y1 = damage_area->y1;
  		overlap_damage_area->y2 = damage_area->y2;
-@@ -1685,6 +1689,7 @@ static bool psr2_sel_fetch_pipe_state_supported(const struct intel_crtc_state *c
+@@ -1691,6 +1695,7 @@ static bool psr2_sel_fetch_pipe_state_supported(const struct intel_crtc_state *c
  int intel_psr2_sel_fetch_update(struct intel_atomic_state *state,
  				struct intel_crtc *crtc)
  {
@@ -1068,7 +1046,7 @@ index 06db407e2749..36356893c7ca 100644
  	struct intel_crtc_state *crtc_state = intel_atomic_get_new_crtc_state(state, crtc);
  	struct drm_rect pipe_clip = { .x1 = 0, .y1 = -1, .x2 = INT_MAX, .y2 = -1 };
  	struct intel_plane_state *new_plane_state, *old_plane_state;
-@@ -1708,7 +1713,8 @@ int intel_psr2_sel_fetch_update(struct intel_atomic_state *state,
+@@ -1714,7 +1719,8 @@ int intel_psr2_sel_fetch_update(struct intel_atomic_state *state,
  	 */
  	for_each_oldnew_intel_plane_in_state(state, plane, old_plane_state,
  					     new_plane_state, i) {
@@ -1078,7 +1056,7 @@ index 06db407e2749..36356893c7ca 100644
  		struct drm_atomic_helper_damage_iter iter;
  		struct drm_rect clip;
 
-@@ -1735,20 +1741,23 @@ int intel_psr2_sel_fetch_update(struct intel_atomic_state *state,
+@@ -1741,20 +1747,23 @@ int intel_psr2_sel_fetch_update(struct intel_atomic_state *state,
  			if (old_plane_state->uapi.visible) {
  				damaged_area.y1 = old_plane_state->uapi.dst.y1;
  				damaged_area.y2 = old_plane_state->uapi.dst.y2;
@@ -1105,7 +1083,7 @@ index 06db407e2749..36356893c7ca 100644
  			continue;
  		}
 
-@@ -1759,7 +1768,8 @@ int intel_psr2_sel_fetch_update(struct intel_atomic_state *state,
+@@ -1765,7 +1774,8 @@ int intel_psr2_sel_fetch_update(struct intel_atomic_state *state,
  						   &new_plane_state->uapi);
  		drm_atomic_for_each_plane_damage(&iter, &clip) {
  			if (drm_rect_intersect(&clip, &src))
@@ -1115,7 +1093,7 @@ index 06db407e2749..36356893c7ca 100644
  		}
 
  		if (damaged_area.y1 == -1)
-@@ -1767,7 +1777,20 @@ int intel_psr2_sel_fetch_update(struct intel_atomic_state *state,
+@@ -1773,7 +1783,20 @@ int intel_psr2_sel_fetch_update(struct intel_atomic_state *state,
 
  		damaged_area.y1 += new_plane_state->uapi.dst.y1 - src.y1;
  		damaged_area.y2 += new_plane_state->uapi.dst.y1 - src.y1;
@@ -3077,7 +3055,7 @@ index 1e0041ec8132..5bcd047768b6 100644
  					       ARRAY_SIZE(power_domain_names),
  					       sizeof(*power->pd_xlate.domains),
 diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
-index dfef85a18eb5..d733da254911 100644
+index 80b29f937c60..8eaebd6a15b8 100644
 --- a/drivers/usb/core/hub.c
 +++ b/drivers/usb/core/hub.c
 @@ -5686,6 +5686,13 @@ static void hub_event(struct work_struct *work)
diff --git a/SPECS/kernel.spec b/SPECS/kernel.spec
index a3b0511..30924b9 100755
--- a/SPECS/kernel.spec
+++ b/SPECS/kernel.spec
@@ -122,17 +122,17 @@ Summary: The Linux kernel
 #  the --with-release option overrides this setting.)
 %define debugbuildsenabled 1
 %define buildid .fsync
-%define specversion 5.19.11
+%define specversion 5.19.12
 %define patchversion 5.19
 %define pkgrelease 200
 %define kversion 5
-%define tarfile_release 5.19.11
+%define tarfile_release 5.19.12
 # This is needed to do merge window version magic
 %define patchlevel 19
 # This allows pkg_release to have configurable %%{?dist} tag
 %define specrelease 201%{?buildid}%{?dist}
 # This defines the kabi tarball version
-%define kabiversion 5.19.11
+%define kabiversion 5.19.12
 
 #
 # End of genspec.sh variables
@@ -877,6 +877,9 @@ Patch302: asus-linux.patch
 Patch401: 0001-Revert-PCI-Add-a-REBAR-size-quirk-for-Sapphire-RX-56.patch
 Patch402: amdgpu-regression.patch
 Patch403: v3-1-7-acpi-x86-s2idle-Move-_HID-handling-for-AMD-systems-into-structures.patch
+Patch405: mt76:-mt7921:-Disable-powersave-features-by-default.patch
+Patch406: ALSA:-usb-audio:-Split-endpoint-setups-for-hw_params-and-prepare.patch
+Patch407: ACPI:-processor-idle:-Practically-limit-Dummy-wait-workaround-to-old-Intel-systems.patch
 
 %endif
 
@@ -1468,6 +1471,9 @@ ApplyOptionalPatch asus-linux.patch
 ApplyOptionalPatch 0001-Revert-PCI-Add-a-REBAR-size-quirk-for-Sapphire-RX-56.patch
 ApplyOptionalPatch amdgpu-regression.patch
 ApplyOptionalPatch v3-1-7-acpi-x86-s2idle-Move-_HID-handling-for-AMD-systems-into-structures.patch
+ApplyOptionalPatch mt76:-mt7921:-Disable-powersave-features-by-default.patch
+ApplyOptionalPatch ALSA:-usb-audio:-Split-endpoint-setups-for-hw_params-and-prepare.patch
+ApplyOptionalPatch ACPI:-processor-idle:-Practically-limit-Dummy-wait-workaround-to-old-Intel-systems.patch
 
 %endif
 
@@ -3175,8 +3181,11 @@ fi
 #
 #
 %changelog
-* Mon Sep 26 2022 Jan Drögehoff <sentrycraft123@gmail.com> - 5.19.11-201.fsync
-- Linux v5.19.11 futex2 zen openrgb
+* Thu Sep 29 2022 Jan Drögehoff <sentrycraft123@gmail.com> - 5.19.12-201.fsync
+- Linux v5.19.12 futex2 zen openrgb
+
+* Wed Sep 28 2022 Justin M. Forbes <jforbes@fedoraproject.org> [5.19.12-0]
+- Linux v5.19.12
 
 * Fri Sep 23 2022 Justin M. Forbes <jforbes@fedoraproject.org> [5.19.11-0]
 - Linux v5.19.11