diff options
Diffstat (limited to 'lib/mbedtls-2.27.0/programs/ssl/dtls_server.c')
-rw-r--r-- | lib/mbedtls-2.27.0/programs/ssl/dtls_server.c | 438 |
1 files changed, 438 insertions, 0 deletions
diff --git a/lib/mbedtls-2.27.0/programs/ssl/dtls_server.c b/lib/mbedtls-2.27.0/programs/ssl/dtls_server.c new file mode 100644 index 0000000..5f71ec9 --- /dev/null +++ b/lib/mbedtls-2.27.0/programs/ssl/dtls_server.c @@ -0,0 +1,438 @@ +/* + * Simple DTLS server demonstration program + * + * Copyright The Mbed TLS Contributors + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if !defined(MBEDTLS_CONFIG_FILE) +#include "mbedtls/config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif + +#if defined(MBEDTLS_PLATFORM_C) +#include "mbedtls/platform.h" +#else +#include <stdio.h> +#include <stdlib.h> +#define mbedtls_printf printf +#define mbedtls_fprintf fprintf +#define mbedtls_time_t time_t +#define mbedtls_exit exit +#define MBEDTLS_EXIT_SUCCESS EXIT_SUCCESS +#define MBEDTLS_EXIT_FAILURE EXIT_FAILURE +#endif + +/* Uncomment out the following line to default to IPv4 and disable IPv6 */ +//#define FORCE_IPV4 + +#ifdef FORCE_IPV4 +#define BIND_IP "0.0.0.0" /* Forces IPv4 */ +#else +#define BIND_IP "::" +#endif + +#if !defined(MBEDTLS_SSL_SRV_C) || !defined(MBEDTLS_SSL_PROTO_DTLS) || \ + !defined(MBEDTLS_SSL_COOKIE_C) || !defined(MBEDTLS_NET_C) || \ + !defined(MBEDTLS_ENTROPY_C) || !defined(MBEDTLS_CTR_DRBG_C) || \ + !defined(MBEDTLS_X509_CRT_PARSE_C) || !defined(MBEDTLS_RSA_C) || \ + !defined(MBEDTLS_CERTS_C) || !defined(MBEDTLS_PEM_PARSE_C) || \ + !defined(MBEDTLS_TIMING_C) + +int main( void ) +{ + printf( "MBEDTLS_SSL_SRV_C and/or MBEDTLS_SSL_PROTO_DTLS and/or " + "MBEDTLS_SSL_COOKIE_C and/or MBEDTLS_NET_C and/or " + "MBEDTLS_ENTROPY_C and/or MBEDTLS_CTR_DRBG_C and/or " + "MBEDTLS_X509_CRT_PARSE_C and/or MBEDTLS_RSA_C and/or " + "MBEDTLS_CERTS_C and/or MBEDTLS_PEM_PARSE_C and/or " + "MBEDTLS_TIMING_C not defined.\n" ); + mbedtls_exit( 0 ); +} +#else + +#if defined(_WIN32) +#include <windows.h> +#endif + +#include <string.h> +#include <stdlib.h> +#include <stdio.h> + +#include "mbedtls/entropy.h" +#include "mbedtls/ctr_drbg.h" +#include "mbedtls/certs.h" +#include "mbedtls/x509.h" +#include "mbedtls/ssl.h" +#include "mbedtls/ssl_cookie.h" +#include "mbedtls/net_sockets.h" +#include "mbedtls/error.h" +#include "mbedtls/debug.h" +#include "mbedtls/timing.h" + +#if defined(MBEDTLS_SSL_CACHE_C) +#include "mbedtls/ssl_cache.h" +#endif + +#define READ_TIMEOUT_MS 10000 /* 10 seconds */ +#define DEBUG_LEVEL 0 + + +static void my_debug( void *ctx, int level, + const char *file, int line, + const char *str ) +{ + ((void) level); + + mbedtls_fprintf( (FILE *) ctx, "%s:%04d: %s", file, line, str ); + fflush( (FILE *) ctx ); +} + +int main( void ) +{ + int ret, len; + mbedtls_net_context listen_fd, client_fd; + unsigned char buf[1024]; + const char *pers = "dtls_server"; + unsigned char client_ip[16] = { 0 }; + size_t cliip_len; + mbedtls_ssl_cookie_ctx cookie_ctx; + + mbedtls_entropy_context entropy; + mbedtls_ctr_drbg_context ctr_drbg; + mbedtls_ssl_context ssl; + mbedtls_ssl_config conf; + mbedtls_x509_crt srvcert; + mbedtls_pk_context pkey; + mbedtls_timing_delay_context timer; +#if defined(MBEDTLS_SSL_CACHE_C) + mbedtls_ssl_cache_context cache; +#endif + + mbedtls_net_init( &listen_fd ); + mbedtls_net_init( &client_fd ); + mbedtls_ssl_init( &ssl ); + mbedtls_ssl_config_init( &conf ); + mbedtls_ssl_cookie_init( &cookie_ctx ); +#if defined(MBEDTLS_SSL_CACHE_C) + mbedtls_ssl_cache_init( &cache ); +#endif + mbedtls_x509_crt_init( &srvcert ); + mbedtls_pk_init( &pkey ); + mbedtls_entropy_init( &entropy ); + mbedtls_ctr_drbg_init( &ctr_drbg ); + +#if defined(MBEDTLS_DEBUG_C) + mbedtls_debug_set_threshold( DEBUG_LEVEL ); +#endif + + /* + * 1. Load the certificates and private RSA key + */ + printf( "\n . Loading the server cert. and key..." ); + fflush( stdout ); + + /* + * This demonstration program uses embedded test certificates. + * Instead, you may want to use mbedtls_x509_crt_parse_file() to read the + * server and CA certificates, as well as mbedtls_pk_parse_keyfile(). + */ + ret = mbedtls_x509_crt_parse( &srvcert, (const unsigned char *) mbedtls_test_srv_crt, + mbedtls_test_srv_crt_len ); + if( ret != 0 ) + { + printf( " failed\n ! mbedtls_x509_crt_parse returned %d\n\n", ret ); + goto exit; + } + + ret = mbedtls_x509_crt_parse( &srvcert, (const unsigned char *) mbedtls_test_cas_pem, + mbedtls_test_cas_pem_len ); + if( ret != 0 ) + { + printf( " failed\n ! mbedtls_x509_crt_parse returned %d\n\n", ret ); + goto exit; + } + + ret = mbedtls_pk_parse_key( &pkey, (const unsigned char *) mbedtls_test_srv_key, + mbedtls_test_srv_key_len, NULL, 0 ); + if( ret != 0 ) + { + printf( " failed\n ! mbedtls_pk_parse_key returned %d\n\n", ret ); + goto exit; + } + + printf( " ok\n" ); + + /* + * 2. Setup the "listening" UDP socket + */ + printf( " . Bind on udp/*/4433 ..." ); + fflush( stdout ); + + if( ( ret = mbedtls_net_bind( &listen_fd, BIND_IP, "4433", MBEDTLS_NET_PROTO_UDP ) ) != 0 ) + { + printf( " failed\n ! mbedtls_net_bind returned %d\n\n", ret ); + goto exit; + } + + printf( " ok\n" ); + + /* + * 3. Seed the RNG + */ + printf( " . Seeding the random number generator..." ); + fflush( stdout ); + + if( ( ret = mbedtls_ctr_drbg_seed( &ctr_drbg, mbedtls_entropy_func, &entropy, + (const unsigned char *) pers, + strlen( pers ) ) ) != 0 ) + { + printf( " failed\n ! mbedtls_ctr_drbg_seed returned %d\n", ret ); + goto exit; + } + + printf( " ok\n" ); + + /* + * 4. Setup stuff + */ + printf( " . Setting up the DTLS data..." ); + fflush( stdout ); + + if( ( ret = mbedtls_ssl_config_defaults( &conf, + MBEDTLS_SSL_IS_SERVER, + MBEDTLS_SSL_TRANSPORT_DATAGRAM, + MBEDTLS_SSL_PRESET_DEFAULT ) ) != 0 ) + { + mbedtls_printf( " failed\n ! mbedtls_ssl_config_defaults returned %d\n\n", ret ); + goto exit; + } + + mbedtls_ssl_conf_rng( &conf, mbedtls_ctr_drbg_random, &ctr_drbg ); + mbedtls_ssl_conf_dbg( &conf, my_debug, stdout ); + mbedtls_ssl_conf_read_timeout( &conf, READ_TIMEOUT_MS ); + +#if defined(MBEDTLS_SSL_CACHE_C) + mbedtls_ssl_conf_session_cache( &conf, &cache, + mbedtls_ssl_cache_get, + mbedtls_ssl_cache_set ); +#endif + + mbedtls_ssl_conf_ca_chain( &conf, srvcert.next, NULL ); + if( ( ret = mbedtls_ssl_conf_own_cert( &conf, &srvcert, &pkey ) ) != 0 ) + { + printf( " failed\n ! mbedtls_ssl_conf_own_cert returned %d\n\n", ret ); + goto exit; + } + + if( ( ret = mbedtls_ssl_cookie_setup( &cookie_ctx, + mbedtls_ctr_drbg_random, &ctr_drbg ) ) != 0 ) + { + printf( " failed\n ! mbedtls_ssl_cookie_setup returned %d\n\n", ret ); + goto exit; + } + + mbedtls_ssl_conf_dtls_cookies( &conf, mbedtls_ssl_cookie_write, mbedtls_ssl_cookie_check, + &cookie_ctx ); + + if( ( ret = mbedtls_ssl_setup( &ssl, &conf ) ) != 0 ) + { + printf( " failed\n ! mbedtls_ssl_setup returned %d\n\n", ret ); + goto exit; + } + + mbedtls_ssl_set_timer_cb( &ssl, &timer, mbedtls_timing_set_delay, + mbedtls_timing_get_delay ); + + printf( " ok\n" ); + +reset: +#ifdef MBEDTLS_ERROR_C + if( ret != 0 ) + { + char error_buf[100]; + mbedtls_strerror( ret, error_buf, 100 ); + printf("Last error was: %d - %s\n\n", ret, error_buf ); + } +#endif + + mbedtls_net_free( &client_fd ); + + mbedtls_ssl_session_reset( &ssl ); + + /* + * 3. Wait until a client connects + */ + printf( " . Waiting for a remote connection ..." ); + fflush( stdout ); + + if( ( ret = mbedtls_net_accept( &listen_fd, &client_fd, + client_ip, sizeof( client_ip ), &cliip_len ) ) != 0 ) + { + printf( " failed\n ! mbedtls_net_accept returned %d\n\n", ret ); + goto exit; + } + + /* For HelloVerifyRequest cookies */ + if( ( ret = mbedtls_ssl_set_client_transport_id( &ssl, + client_ip, cliip_len ) ) != 0 ) + { + printf( " failed\n ! " + "mbedtls_ssl_set_client_transport_id() returned -0x%x\n\n", (unsigned int) -ret ); + goto exit; + } + + mbedtls_ssl_set_bio( &ssl, &client_fd, + mbedtls_net_send, mbedtls_net_recv, mbedtls_net_recv_timeout ); + + printf( " ok\n" ); + + /* + * 5. Handshake + */ + printf( " . Performing the DTLS handshake..." ); + fflush( stdout ); + + do ret = mbedtls_ssl_handshake( &ssl ); + while( ret == MBEDTLS_ERR_SSL_WANT_READ || + ret == MBEDTLS_ERR_SSL_WANT_WRITE ); + + if( ret == MBEDTLS_ERR_SSL_HELLO_VERIFY_REQUIRED ) + { + printf( " hello verification requested\n" ); + ret = 0; + goto reset; + } + else if( ret != 0 ) + { + printf( " failed\n ! mbedtls_ssl_handshake returned -0x%x\n\n", (unsigned int) -ret ); + goto reset; + } + + printf( " ok\n" ); + + /* + * 6. Read the echo Request + */ + printf( " < Read from client:" ); + fflush( stdout ); + + len = sizeof( buf ) - 1; + memset( buf, 0, sizeof( buf ) ); + + do ret = mbedtls_ssl_read( &ssl, buf, len ); + while( ret == MBEDTLS_ERR_SSL_WANT_READ || + ret == MBEDTLS_ERR_SSL_WANT_WRITE ); + + if( ret <= 0 ) + { + switch( ret ) + { + case MBEDTLS_ERR_SSL_TIMEOUT: + printf( " timeout\n\n" ); + goto reset; + + case MBEDTLS_ERR_SSL_PEER_CLOSE_NOTIFY: + printf( " connection was closed gracefully\n" ); + ret = 0; + goto close_notify; + + default: + printf( " mbedtls_ssl_read returned -0x%x\n\n", (unsigned int) -ret ); + goto reset; + } + } + + len = ret; + printf( " %d bytes read\n\n%s\n\n", len, buf ); + + /* + * 7. Write the 200 Response + */ + printf( " > Write to client:" ); + fflush( stdout ); + + do ret = mbedtls_ssl_write( &ssl, buf, len ); + while( ret == MBEDTLS_ERR_SSL_WANT_READ || + ret == MBEDTLS_ERR_SSL_WANT_WRITE ); + + if( ret < 0 ) + { + printf( " failed\n ! mbedtls_ssl_write returned %d\n\n", ret ); + goto exit; + } + + len = ret; + printf( " %d bytes written\n\n%s\n\n", len, buf ); + + /* + * 8. Done, cleanly close the connection + */ +close_notify: + printf( " . Closing the connection..." ); + + /* No error checking, the connection might be closed already */ + do ret = mbedtls_ssl_close_notify( &ssl ); + while( ret == MBEDTLS_ERR_SSL_WANT_WRITE ); + ret = 0; + + printf( " done\n" ); + + goto reset; + + /* + * Final clean-ups and exit + */ +exit: + +#ifdef MBEDTLS_ERROR_C + if( ret != 0 ) + { + char error_buf[100]; + mbedtls_strerror( ret, error_buf, 100 ); + printf( "Last error was: %d - %s\n\n", ret, error_buf ); + } +#endif + + mbedtls_net_free( &client_fd ); + mbedtls_net_free( &listen_fd ); + + mbedtls_x509_crt_free( &srvcert ); + mbedtls_pk_free( &pkey ); + mbedtls_ssl_free( &ssl ); + mbedtls_ssl_config_free( &conf ); + mbedtls_ssl_cookie_free( &cookie_ctx ); +#if defined(MBEDTLS_SSL_CACHE_C) + mbedtls_ssl_cache_free( &cache ); +#endif + mbedtls_ctr_drbg_free( &ctr_drbg ); + mbedtls_entropy_free( &entropy ); + +#if defined(_WIN32) + printf( " Press Enter to exit this program.\n" ); + fflush( stdout ); getchar(); +#endif + + /* Shell can not handle large exit numbers -> 1 for errors */ + if( ret < 0 ) + ret = 1; + + mbedtls_exit( ret ); +} +#endif /* MBEDTLS_SSL_SRV_C && MBEDTLS_SSL_PROTO_DTLS && + MBEDTLS_SSL_COOKIE_C && MBEDTLS_NET_C && MBEDTLS_ENTROPY_C && + MBEDTLS_CTR_DRBG_C && MBEDTLS_X509_CRT_PARSE_C && MBEDTLS_RSA_C + && MBEDTLS_CERTS_C && MBEDTLS_PEM_PARSE_C && MBEDTLS_TIMING_C */ |