diff options
Diffstat (limited to 'lib/mbedtls-2.27.0/include/psa/crypto_values.h')
| -rw-r--r-- | lib/mbedtls-2.27.0/include/psa/crypto_values.h | 2218 |
1 files changed, 0 insertions, 2218 deletions
diff --git a/lib/mbedtls-2.27.0/include/psa/crypto_values.h b/lib/mbedtls-2.27.0/include/psa/crypto_values.h deleted file mode 100644 index 3c82f2a..0000000 --- a/lib/mbedtls-2.27.0/include/psa/crypto_values.h +++ /dev/null @@ -1,2218 +0,0 @@ -/** - * \file psa/crypto_values.h - * - * \brief PSA cryptography module: macros to build and analyze integer values. - * - * \note This file may not be included directly. Applications must - * include psa/crypto.h. Drivers must include the appropriate driver - * header file. - * - * This file contains portable definitions of macros to build and analyze - * values of integral types that encode properties of cryptographic keys, - * designations of cryptographic algorithms, and error codes returned by - * the library. - * - * This header file only defines preprocessor macros. - */ -/* - * Copyright The Mbed TLS Contributors - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the "License"); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#ifndef PSA_CRYPTO_VALUES_H -#define PSA_CRYPTO_VALUES_H - -/** \defgroup error Error codes - * @{ - */ - -/* PSA error codes */ - -/** The action was completed successfully. */ -#define PSA_SUCCESS ((psa_status_t)0) - -/** An error occurred that does not correspond to any defined - * failure cause. - * - * Implementations may use this error code if none of the other standard - * error codes are applicable. */ -#define PSA_ERROR_GENERIC_ERROR ((psa_status_t)-132) - -/** The requested operation or a parameter is not supported - * by this implementation. - * - * Implementations should return this error code when an enumeration - * parameter such as a key type, algorithm, etc. is not recognized. - * If a combination of parameters is recognized and identified as - * not valid, return #PSA_ERROR_INVALID_ARGUMENT instead. */ -#define PSA_ERROR_NOT_SUPPORTED ((psa_status_t)-134) - -/** The requested action is denied by a policy. - * - * Implementations should return this error code when the parameters - * are recognized as valid and supported, and a policy explicitly - * denies the requested operation. - * - * If a subset of the parameters of a function call identify a - * forbidden operation, and another subset of the parameters are - * not valid or not supported, it is unspecified whether the function - * returns #PSA_ERROR_NOT_PERMITTED, #PSA_ERROR_NOT_SUPPORTED or - * #PSA_ERROR_INVALID_ARGUMENT. */ -#define PSA_ERROR_NOT_PERMITTED ((psa_status_t)-133) - -/** An output buffer is too small. - * - * Applications can call the \c PSA_xxx_SIZE macro listed in the function - * description to determine a sufficient buffer size. - * - * Implementations should preferably return this error code only - * in cases when performing the operation with a larger output - * buffer would succeed. However implementations may return this - * error if a function has invalid or unsupported parameters in addition - * to the parameters that determine the necessary output buffer size. */ -#define PSA_ERROR_BUFFER_TOO_SMALL ((psa_status_t)-138) - -/** Asking for an item that already exists - * - * Implementations should return this error, when attempting - * to write an item (like a key) that already exists. */ -#define PSA_ERROR_ALREADY_EXISTS ((psa_status_t)-139) - -/** Asking for an item that doesn't exist - * - * Implementations should return this error, if a requested item (like - * a key) does not exist. */ -#define PSA_ERROR_DOES_NOT_EXIST ((psa_status_t)-140) - -/** The requested action cannot be performed in the current state. - * - * Multipart operations return this error when one of the - * functions is called out of sequence. Refer to the function - * descriptions for permitted sequencing of functions. - * - * Implementations shall not return this error code to indicate - * that a key either exists or not, - * but shall instead return #PSA_ERROR_ALREADY_EXISTS or #PSA_ERROR_DOES_NOT_EXIST - * as applicable. - * - * Implementations shall not return this error code to indicate that a - * key identifier is invalid, but shall return #PSA_ERROR_INVALID_HANDLE - * instead. */ -#define PSA_ERROR_BAD_STATE ((psa_status_t)-137) - -/** The parameters passed to the function are invalid. - * - * Implementations may return this error any time a parameter or - * combination of parameters are recognized as invalid. - * - * Implementations shall not return this error code to indicate that a - * key identifier is invalid, but shall return #PSA_ERROR_INVALID_HANDLE - * instead. - */ -#define PSA_ERROR_INVALID_ARGUMENT ((psa_status_t)-135) - -/** There is not enough runtime memory. - * - * If the action is carried out across multiple security realms, this - * error can refer to available memory in any of the security realms. */ -#define PSA_ERROR_INSUFFICIENT_MEMORY ((psa_status_t)-141) - -/** There is not enough persistent storage. - * - * Functions that modify the key storage return this error code if - * there is insufficient storage space on the host media. In addition, - * many functions that do not otherwise access storage may return this - * error code if the implementation requires a mandatory log entry for - * the requested action and the log storage space is full. */ -#define PSA_ERROR_INSUFFICIENT_STORAGE ((psa_status_t)-142) - -/** There was a communication failure inside the implementation. - * - * This can indicate a communication failure between the application - * and an external cryptoprocessor or between the cryptoprocessor and - * an external volatile or persistent memory. A communication failure - * may be transient or permanent depending on the cause. - * - * \warning If a function returns this error, it is undetermined - * whether the requested action has completed or not. Implementations - * should return #PSA_SUCCESS on successful completion whenever - * possible, however functions may return #PSA_ERROR_COMMUNICATION_FAILURE - * if the requested action was completed successfully in an external - * cryptoprocessor but there was a breakdown of communication before - * the cryptoprocessor could report the status to the application. - */ -#define PSA_ERROR_COMMUNICATION_FAILURE ((psa_status_t)-145) - -/** There was a storage failure that may have led to data loss. - * - * This error indicates that some persistent storage is corrupted. - * It should not be used for a corruption of volatile memory - * (use #PSA_ERROR_CORRUPTION_DETECTED), for a communication error - * between the cryptoprocessor and its external storage (use - * #PSA_ERROR_COMMUNICATION_FAILURE), or when the storage is - * in a valid state but is full (use #PSA_ERROR_INSUFFICIENT_STORAGE). - * - * Note that a storage failure does not indicate that any data that was - * previously read is invalid. However this previously read data may no - * longer be readable from storage. - * - * When a storage failure occurs, it is no longer possible to ensure - * the global integrity of the keystore. Depending on the global - * integrity guarantees offered by the implementation, access to other - * data may or may not fail even if the data is still readable but - * its integrity cannot be guaranteed. - * - * Implementations should only use this error code to report a - * permanent storage corruption. However application writers should - * keep in mind that transient errors while reading the storage may be - * reported using this error code. */ -#define PSA_ERROR_STORAGE_FAILURE ((psa_status_t)-146) - -/** A hardware failure was detected. - * - * A hardware failure may be transient or permanent depending on the - * cause. */ -#define PSA_ERROR_HARDWARE_FAILURE ((psa_status_t)-147) - -/** A tampering attempt was detected. - * - * If an application receives this error code, there is no guarantee - * that previously accessed or computed data was correct and remains - * confidential. Applications should not perform any security function - * and should enter a safe failure state. - * - * Implementations may return this error code if they detect an invalid - * state that cannot happen during normal operation and that indicates - * that the implementation's security guarantees no longer hold. Depending - * on the implementation architecture and on its security and safety goals, - * the implementation may forcibly terminate the application. - * - * This error code is intended as a last resort when a security breach - * is detected and it is unsure whether the keystore data is still - * protected. Implementations shall only return this error code - * to report an alarm from a tampering detector, to indicate that - * the confidentiality of stored data can no longer be guaranteed, - * or to indicate that the integrity of previously returned data is now - * considered compromised. Implementations shall not use this error code - * to indicate a hardware failure that merely makes it impossible to - * perform the requested operation (use #PSA_ERROR_COMMUNICATION_FAILURE, - * #PSA_ERROR_STORAGE_FAILURE, #PSA_ERROR_HARDWARE_FAILURE, - * #PSA_ERROR_INSUFFICIENT_ENTROPY or other applicable error code - * instead). - * - * This error indicates an attack against the application. Implementations - * shall not return this error code as a consequence of the behavior of - * the application itself. */ -#define PSA_ERROR_CORRUPTION_DETECTED ((psa_status_t)-151) - -/** There is not enough entropy to generate random data needed - * for the requested action. - * - * This error indicates a failure of a hardware random generator. - * Application writers should note that this error can be returned not - * only by functions whose purpose is to generate random data, such - * as key, IV or nonce generation, but also by functions that execute - * an algorithm with a randomized result, as well as functions that - * use randomization of intermediate computations as a countermeasure - * to certain attacks. - * - * Implementations should avoid returning this error after psa_crypto_init() - * has succeeded. Implementations should generate sufficient - * entropy during initialization and subsequently use a cryptographically - * secure pseudorandom generator (PRNG). However implementations may return - * this error at any time if a policy requires the PRNG to be reseeded - * during normal operation. */ -#define PSA_ERROR_INSUFFICIENT_ENTROPY ((psa_status_t)-148) - -/** The signature, MAC or hash is incorrect. - * - * Verification functions return this error if the verification - * calculations completed successfully, and the value to be verified - * was determined to be incorrect. - * - * If the value to verify has an invalid size, implementations may return - * either #PSA_ERROR_INVALID_ARGUMENT or #PSA_ERROR_INVALID_SIGNATURE. */ -#define PSA_ERROR_INVALID_SIGNATURE ((psa_status_t)-149) - -/** The decrypted padding is incorrect. - * - * \warning In some protocols, when decrypting data, it is essential that - * the behavior of the application does not depend on whether the padding - * is correct, down to precise timing. Applications should prefer - * protocols that use authenticated encryption rather than plain - * encryption. If the application must perform a decryption of - * unauthenticated data, the application writer should take care not - * to reveal whether the padding is invalid. - * - * Implementations should strive to make valid and invalid padding - * as close as possible to indistinguishable to an external observer. - * In particular, the timing of a decryption operation should not - * depend on the validity of the padding. */ -#define PSA_ERROR_INVALID_PADDING ((psa_status_t)-150) - -/** Return this error when there's insufficient data when attempting - * to read from a resource. */ -#define PSA_ERROR_INSUFFICIENT_DATA ((psa_status_t)-143) - -/** The key identifier is not valid. See also :ref:\`key-handles\`. - */ -#define PSA_ERROR_INVALID_HANDLE ((psa_status_t)-136) - -/** Stored data has been corrupted. - * - * This error indicates that some persistent storage has suffered corruption. - * It does not indicate the following situations, which have specific error - * codes: - * - * - A corruption of volatile memory - use #PSA_ERROR_CORRUPTION_DETECTED. - * - A communication error between the cryptoprocessor and its external - * storage - use #PSA_ERROR_COMMUNICATION_FAILURE. - * - When the storage is in a valid state but is full - use - * #PSA_ERROR_INSUFFICIENT_STORAGE. - * - When the storage fails for other reasons - use - * #PSA_ERROR_STORAGE_FAILURE. - * - When the stored data is not valid - use #PSA_ERROR_DATA_INVALID. - * - * \note A storage corruption does not indicate that any data that was - * previously read is invalid. However this previously read data might no - * longer be readable from storage. - * - * When a storage failure occurs, it is no longer possible to ensure the - * global integrity of the keystore. - */ -#define PSA_ERROR_DATA_CORRUPT ((psa_status_t)-152) - -/** Data read from storage is not valid for the implementation. - * - * This error indicates that some data read from storage does not have a valid - * format. It does not indicate the following situations, which have specific - * error codes: - * - * - When the storage or stored data is corrupted - use #PSA_ERROR_DATA_CORRUPT - * - When the storage fails for other reasons - use #PSA_ERROR_STORAGE_FAILURE - * - An invalid argument to the API - use #PSA_ERROR_INVALID_ARGUMENT - * - * This error is typically a result of either storage corruption on a - * cleartext storage backend, or an attempt to read data that was - * written by an incompatible version of the library. - */ -#define PSA_ERROR_DATA_INVALID ((psa_status_t)-153) - -/**@}*/ - -/** \defgroup crypto_types Key and algorithm types - * @{ - */ - -/** An invalid key type value. - * - * Zero is not the encoding of any key type. - */ -#define PSA_KEY_TYPE_NONE ((psa_key_type_t)0x0000) - -/** Vendor-defined key type flag. - * - * Key types defined by this standard will never have the - * #PSA_KEY_TYPE_VENDOR_FLAG bit set. Vendors who define additional key types - * must use an encoding with the #PSA_KEY_TYPE_VENDOR_FLAG bit set and should - * respect the bitwise structure used by standard encodings whenever practical. - */ -#define PSA_KEY_TYPE_VENDOR_FLAG ((psa_key_type_t)0x8000) - -#define PSA_KEY_TYPE_CATEGORY_MASK ((psa_key_type_t)0x7000) -#define PSA_KEY_TYPE_CATEGORY_RAW ((psa_key_type_t)0x1000) -#define PSA_KEY_TYPE_CATEGORY_SYMMETRIC ((psa_key_type_t)0x2000) -#define PSA_KEY_TYPE_CATEGORY_PUBLIC_KEY ((psa_key_type_t)0x4000) -#define PSA_KEY_TYPE_CATEGORY_KEY_PAIR ((psa_key_type_t)0x7000) - -#define PSA_KEY_TYPE_CATEGORY_FLAG_PAIR ((psa_key_type_t)0x3000) - -/** Whether a key type is vendor-defined. - * - * See also #PSA_KEY_TYPE_VENDOR_FLAG. - */ -#define PSA_KEY_TYPE_IS_VENDOR_DEFINED(type) \ - (((type) & PSA_KEY_TYPE_VENDOR_FLAG) != 0) - -/** Whether a key type is an unstructured array of bytes. - * - * This encompasses both symmetric keys and non-key data. - */ -#define PSA_KEY_TYPE_IS_UNSTRUCTURED(type) \ - (((type) & PSA_KEY_TYPE_CATEGORY_MASK) == PSA_KEY_TYPE_CATEGORY_RAW || \ - ((type) & PSA_KEY_TYPE_CATEGORY_MASK) == PSA_KEY_TYPE_CATEGORY_SYMMETRIC) - -/** Whether a key type is asymmetric: either a key pair or a public key. */ -#define PSA_KEY_TYPE_IS_ASYMMETRIC(type) \ - (((type) & PSA_KEY_TYPE_CATEGORY_MASK \ - & ~PSA_KEY_TYPE_CATEGORY_FLAG_PAIR) == \ - PSA_KEY_TYPE_CATEGORY_PUBLIC_KEY) -/** Whether a key type is the public part of a key pair. */ -#define PSA_KEY_TYPE_IS_PUBLIC_KEY(type) \ - (((type) & PSA_KEY_TYPE_CATEGORY_MASK) == PSA_KEY_TYPE_CATEGORY_PUBLIC_KEY) -/** Whether a key type is a key pair containing a private part and a public - * part. */ -#define PSA_KEY_TYPE_IS_KEY_PAIR(type) \ - (((type) & PSA_KEY_TYPE_CATEGORY_MASK) == PSA_KEY_TYPE_CATEGORY_KEY_PAIR) -/** The key pair type corresponding to a public key type. - * - * You may also pass a key pair type as \p type, it will be left unchanged. - * - * \param type A public key type or key pair type. - * - * \return The corresponding key pair type. - * If \p type is not a public key or a key pair, - * the return value is undefined. - */ -#define PSA_KEY_TYPE_KEY_PAIR_OF_PUBLIC_KEY(type) \ - ((type) | PSA_KEY_TYPE_CATEGORY_FLAG_PAIR) -/** The public key type corresponding to a key pair type. - * - * You may also pass a key pair type as \p type, it will be left unchanged. - * - * \param type A public key type or key pair type. - * - * \return The corresponding public key type. - * If \p type is not a public key or a key pair, - * the return value is undefined. - */ -#define PSA_KEY_TYPE_PUBLIC_KEY_OF_KEY_PAIR(type) \ - ((type) & ~PSA_KEY_TYPE_CATEGORY_FLAG_PAIR) - -/** Raw data. - * - * A "key" of this type cannot be used for any cryptographic operation. - * Applications may use this type to store arbitrary data in the keystore. */ -#define PSA_KEY_TYPE_RAW_DATA ((psa_key_type_t)0x1001) - -/** HMAC key. - * - * The key policy determines which underlying hash algorithm the key can be - * used for. - * - * HMAC keys should generally have the same size as the underlying hash. - * This size can be calculated with #PSA_HASH_LENGTH(\c alg) where - * \c alg is the HMAC algorithm or the underlying hash algorithm. */ -#define PSA_KEY_TYPE_HMAC ((psa_key_type_t)0x1100) - -/** A secret for key derivation. - * - * The key policy determines which key derivation algorithm the key - * can be used for. - */ -#define PSA_KEY_TYPE_DERIVE ((psa_key_type_t)0x1200) - -/** Key for a cipher, AEAD or MAC algorithm based on the AES block cipher. - * - * The size of the key can be 16 bytes (AES-128), 24 bytes (AES-192) or - * 32 bytes (AES-256). - */ -#define PSA_KEY_TYPE_AES ((psa_key_type_t)0x2400) - -/** Key for a cipher or MAC algorithm based on DES or 3DES (Triple-DES). - * - * The size of the key can be 64 bits (single DES), 128 bits (2-key 3DES) or - * 192 bits (3-key 3DES). - * - * Note that single DES and 2-key 3DES are weak and strongly - * deprecated and should only be used to decrypt legacy data. 3-key 3DES - * is weak and deprecated and should only be used in legacy protocols. - */ -#define PSA_KEY_TYPE_DES ((psa_key_type_t)0x2301) - -/** Key for a cipher, AEAD or MAC algorithm based on the - * Camellia block cipher. */ -#define PSA_KEY_TYPE_CAMELLIA ((psa_key_type_t)0x2403) - -/** Key for the RC4 stream cipher. - * - * Note that RC4 is weak and deprecated and should only be used in - * legacy protocols. */ -#define PSA_KEY_TYPE_ARC4 ((psa_key_type_t)0x2002) - -/** Key for the ChaCha20 stream cipher or the Chacha20-Poly1305 AEAD algorithm. - * - * ChaCha20 and the ChaCha20_Poly1305 construction are defined in RFC 7539. - * - * Implementations must support 12-byte nonces, may support 8-byte nonces, - * and should reject other sizes. - */ -#define PSA_KEY_TYPE_CHACHA20 ((psa_key_type_t)0x2004) - -/** RSA public key. - * - * The size of an RSA key is the bit size of the modulus. - */ -#define PSA_KEY_TYPE_RSA_PUBLIC_KEY ((psa_key_type_t)0x4001) -/** RSA key pair (private and public key). - * - * The size of an RSA key is the bit size of the modulus. - */ -#define PSA_KEY_TYPE_RSA_KEY_PAIR ((psa_key_type_t)0x7001) -/** Whether a key type is an RSA key (pair or public-only). */ -#define PSA_KEY_TYPE_IS_RSA(type) \ - (PSA_KEY_TYPE_PUBLIC_KEY_OF_KEY_PAIR(type) == PSA_KEY_TYPE_RSA_PUBLIC_KEY) - -#define PSA_KEY_TYPE_ECC_PUBLIC_KEY_BASE ((psa_key_type_t)0x4100) -#define PSA_KEY_TYPE_ECC_KEY_PAIR_BASE ((psa_key_type_t)0x7100) -#define PSA_KEY_TYPE_ECC_CURVE_MASK ((psa_key_type_t)0x00ff) -/** Elliptic curve key pair. - * - * The size of an elliptic curve key is the bit size associated with the curve, - * i.e. the bit size of *q* for a curve over a field *F<sub>q</sub>*. - * See the documentation of `PSA_ECC_FAMILY_xxx` curve families for details. - * - * \param curve A value of type ::psa_ecc_family_t that - * identifies the ECC curve to be used. - */ -#define PSA_KEY_TYPE_ECC_KEY_PAIR(curve) \ - (PSA_KEY_TYPE_ECC_KEY_PAIR_BASE | (curve)) -/** Elliptic curve public key. - * - * The size of an elliptic curve public key is the same as the corresponding - * private key (see #PSA_KEY_TYPE_ECC_KEY_PAIR and the documentation of - * `PSA_ECC_FAMILY_xxx` curve families). - * - * \param curve A value of type ::psa_ecc_family_t that - * identifies the ECC curve to be used. - */ -#define PSA_KEY_TYPE_ECC_PUBLIC_KEY(curve) \ - (PSA_KEY_TYPE_ECC_PUBLIC_KEY_BASE | (curve)) - -/** Whether a key type is an elliptic curve key (pair or public-only). */ -#define PSA_KEY_TYPE_IS_ECC(type) \ - ((PSA_KEY_TYPE_PUBLIC_KEY_OF_KEY_PAIR(type) & \ - ~PSA_KEY_TYPE_ECC_CURVE_MASK) == PSA_KEY_TYPE_ECC_PUBLIC_KEY_BASE) -/** Whether a key type is an elliptic curve key pair. */ -#define PSA_KEY_TYPE_IS_ECC_KEY_PAIR(type) \ - (((type) & ~PSA_KEY_TYPE_ECC_CURVE_MASK) == \ - PSA_KEY_TYPE_ECC_KEY_PAIR_BASE) -/** Whether a key type is an elliptic curve public key. */ -#define PSA_KEY_TYPE_IS_ECC_PUBLIC_KEY(type) \ - (((type) & ~PSA_KEY_TYPE_ECC_CURVE_MASK) == \ - PSA_KEY_TYPE_ECC_PUBLIC_KEY_BASE) - -/** Extract the curve from an elliptic curve key type. */ -#define PSA_KEY_TYPE_ECC_GET_FAMILY(type) \ - ((psa_ecc_family_t) (PSA_KEY_TYPE_IS_ECC(type) ? \ - ((type) & PSA_KEY_TYPE_ECC_CURVE_MASK) : \ - 0)) - -/** SEC Koblitz curves over prime fields. - * - * This family comprises the following curves: - * secp192k1, secp224k1, secp256k1. - * They are defined in _Standards for Efficient Cryptography_, - * _SEC 2: Recommended Elliptic Curve Domain Parameters_. - * https://www.secg.org/sec2-v2.pdf - */ -#define PSA_ECC_FAMILY_SECP_K1 ((psa_ecc_family_t) 0x17) - -/** SEC random curves over prime fields. - * - * This family comprises the following curves: - * secp192k1, secp224r1, secp256r1, secp384r1, secp521r1. - * They are defined in _Standards for Efficient Cryptography_, - * _SEC 2: Recommended Elliptic Curve Domain Parameters_. - * https://www.secg.org/sec2-v2.pdf - */ -#define PSA_ECC_FAMILY_SECP_R1 ((psa_ecc_family_t) 0x12) -/* SECP160R2 (SEC2 v1, obsolete) */ -#define PSA_ECC_FAMILY_SECP_R2 ((psa_ecc_family_t) 0x1b) - -/** SEC Koblitz curves over binary fields. - * - * This family comprises the following curves: - * sect163k1, sect233k1, sect239k1, sect283k1, sect409k1, sect571k1. - * They are defined in _Standards for Efficient Cryptography_, - * _SEC 2: Recommended Elliptic Curve Domain Parameters_. - * https://www.secg.org/sec2-v2.pdf - */ -#define PSA_ECC_FAMILY_SECT_K1 ((psa_ecc_family_t) 0x27) - -/** SEC random curves over binary fields. - * - * This family comprises the following curves: - * sect163r1, sect233r1, sect283r1, sect409r1, sect571r1. - * They are defined in _Standards for Efficient Cryptography_, - * _SEC 2: Recommended Elliptic Curve Domain Parameters_. - * https://www.secg.org/sec2-v2.pdf - */ -#define PSA_ECC_FAMILY_SECT_R1 ((psa_ecc_family_t) 0x22) - -/** SEC additional random curves over binary fields. - * - * This family comprises the following curve: - * sect163r2. - * It is defined in _Standards for Efficient Cryptography_, - * _SEC 2: Recommended Elliptic Curve Domain Parameters_. - * https://www.secg.org/sec2-v2.pdf - */ -#define PSA_ECC_FAMILY_SECT_R2 ((psa_ecc_family_t) 0x2b) - -/** Brainpool P random curves. - * - * This family comprises the following curves: - * brainpoolP160r1, brainpoolP192r1, brainpoolP224r1, brainpoolP256r1, - * brainpoolP320r1, brainpoolP384r1, brainpoolP512r1. - * It is defined in RFC 5639. - */ -#define PSA_ECC_FAMILY_BRAINPOOL_P_R1 ((psa_ecc_family_t) 0x30) - -/** Curve25519 and Curve448. - * - * This family comprises the following Montgomery curves: - * - 255-bit: Bernstein et al., - * _Curve25519: new Diffie-Hellman speed records_, LNCS 3958, 2006. - * The algorithm #PSA_ALG_ECDH performs X25519 when used with this curve. - * - 448-bit: Hamburg, - * _Ed448-Goldilocks, a new elliptic curve_, NIST ECC Workshop, 2015. - * The algorithm #PSA_ALG_ECDH performs X448 when used with this curve. - */ -#define PSA_ECC_FAMILY_MONTGOMERY ((psa_ecc_family_t) 0x41) - -/** The twisted Edwards curves Ed25519 and Ed448. - * - * These curves are suitable for EdDSA (#PSA_ALG_PURE_EDDSA for both curves, - * #PSA_ALG_ED25519PH for the 255-bit curve, - * #PSA_ALG_ED448PH for the 448-bit curve). - * - * This family comprises the following twisted Edwards curves: - * - 255-bit: Edwards25519, the twisted Edwards curve birationally equivalent - * to Curve25519. - * Bernstein et al., _Twisted Edwards curves_, Africacrypt 2008. - * - 448-bit: Edwards448, the twisted Edwards curve birationally equivalent - * to Curve448. - * Hamburg, _Ed448-Goldilocks, a new elliptic curve_, NIST ECC Workshop, 2015. - */ -#define PSA_ECC_FAMILY_TWISTED_EDWARDS ((psa_ecc_family_t) 0x42) - -#define PSA_KEY_TYPE_DH_PUBLIC_KEY_BASE ((psa_key_type_t)0x4200) -#define PSA_KEY_TYPE_DH_KEY_PAIR_BASE ((psa_key_type_t)0x7200) -#define PSA_KEY_TYPE_DH_GROUP_MASK ((psa_key_type_t)0x00ff) -/** Diffie-Hellman key pair. - * - * \param group A value of type ::psa_dh_family_t that identifies the - * Diffie-Hellman group to be used. - */ -#define PSA_KEY_TYPE_DH_KEY_PAIR(group) \ - (PSA_KEY_TYPE_DH_KEY_PAIR_BASE | (group)) -/** Diffie-Hellman public key. - * - * \param group A value of type ::psa_dh_family_t that identifies the - * Diffie-Hellman group to be used. - */ -#define PSA_KEY_TYPE_DH_PUBLIC_KEY(group) \ - (PSA_KEY_TYPE_DH_PUBLIC_KEY_BASE | (group)) - -/** Whether a key type is a Diffie-Hellman key (pair or public-only). */ -#define PSA_KEY_TYPE_IS_DH(type) \ - ((PSA_KEY_TYPE_PUBLIC_KEY_OF_KEY_PAIR(type) & \ - ~PSA_KEY_TYPE_DH_GROUP_MASK) == PSA_KEY_TYPE_DH_PUBLIC_KEY_BASE) -/** Whether a key type is a Diffie-Hellman key pair. */ -#define PSA_KEY_TYPE_IS_DH_KEY_PAIR(type) \ - (((type) & ~PSA_KEY_TYPE_DH_GROUP_MASK) == \ - PSA_KEY_TYPE_DH_KEY_PAIR_BASE) -/** Whether a key type is a Diffie-Hellman public key. */ -#define PSA_KEY_TYPE_IS_DH_PUBLIC_KEY(type) \ - (((type) & ~PSA_KEY_TYPE_DH_GROUP_MASK) == \ - PSA_KEY_TYPE_DH_PUBLIC_KEY_BASE) - -/** Extract the group from a Diffie-Hellman key type. */ -#define PSA_KEY_TYPE_DH_GET_FAMILY(type) \ - ((psa_dh_family_t) (PSA_KEY_TYPE_IS_DH(type) ? \ - ((type) & PSA_KEY_TYPE_DH_GROUP_MASK) : \ - 0)) - -/** Diffie-Hellman groups defined in RFC 7919 Appendix A. - * - * This family includes groups with the following key sizes (in bits): - * 2048, 3072, 4096, 6144, 8192. A given implementation may support - * all of these sizes or only a subset. - */ -#define PSA_DH_FAMILY_RFC7919 ((psa_dh_family_t) 0x03) - -#define PSA_GET_KEY_TYPE_BLOCK_SIZE_EXPONENT(type) \ - (((type) >> 8) & 7) -/** The block size of a block cipher. - * - * \param type A cipher key type (value of type #psa_key_type_t). - * - * \return The block size for a block cipher, or 1 for a stream cipher. - * The return value is undefined if \p type is not a supported - * cipher key type. - * - * \note It is possible to build stream cipher algorithms on top of a block - * cipher, for example CTR mode (#PSA_ALG_CTR). - * This macro only takes the key type into account, so it cannot be - * used to determine the size of the data that #psa_cipher_update() - * might buffer for future processing in general. - * - * \note This macro returns a compile-time constant if its argument is one. - * - * \warning This macro may evaluate its argument multiple times. - */ -#define PSA_BLOCK_CIPHER_BLOCK_LENGTH(type) \ - (((type) & PSA_KEY_TYPE_CATEGORY_MASK) == PSA_KEY_TYPE_CATEGORY_SYMMETRIC ? \ - 1u << PSA_GET_KEY_TYPE_BLOCK_SIZE_EXPONENT(type) : \ - 0u) - -/** Vendor-defined algorithm flag. - * - * Algorithms defined by this standard will never have the #PSA_ALG_VENDOR_FLAG - * bit set. Vendors who define additional algorithms must use an encoding with - * the #PSA_ALG_VENDOR_FLAG bit set and should respect the bitwise structure - * used by standard encodings whenever practical. - */ -#define PSA_ALG_VENDOR_FLAG ((psa_algorithm_t)0x80000000) - -#define PSA_ALG_CATEGORY_MASK ((psa_algorithm_t)0x7f000000) -#define PSA_ALG_CATEGORY_HASH ((psa_algorithm_t)0x02000000) -#define PSA_ALG_CATEGORY_MAC ((psa_algorithm_t)0x03000000) -#define PSA_ALG_CATEGORY_CIPHER ((psa_algorithm_t)0x04000000) -#define PSA_ALG_CATEGORY_AEAD ((psa_algorithm_t)0x05000000) -#define PSA_ALG_CATEGORY_SIGN ((psa_algorithm_t)0x06000000) -#define PSA_ALG_CATEGORY_ASYMMETRIC_ENCRYPTION ((psa_algorithm_t)0x07000000) -#define PSA_ALG_CATEGORY_KEY_DERIVATION ((psa_algorithm_t)0x08000000) -#define PSA_ALG_CATEGORY_KEY_AGREEMENT ((psa_algorithm_t)0x09000000) - -/** Whether an algorithm is vendor-defined. - * - * See also #PSA_ALG_VENDOR_FLAG. - */ -#define PSA_ALG_IS_VENDOR_DEFINED(alg) \ - (((alg) & PSA_ALG_VENDOR_FLAG) != 0) - -/** Whether the specified algorithm is a hash algorithm. - * - * \param alg An algorithm identifier (value of type #psa_algorithm_t). - * - * \return 1 if \p alg is a hash algorithm, 0 otherwise. - * This macro may return either 0 or 1 if \p alg is not a supported - * algorithm identifier. - */ -#define PSA_ALG_IS_HASH(alg) \ - (((alg) & PSA_ALG_CATEGORY_MASK) == PSA_ALG_CATEGORY_HASH) - -/** Whether the specified algorithm is a MAC algorithm. - * - * \param alg An algorithm identifier (value of type #psa_algorithm_t). - * - * \return 1 if \p alg is a MAC algorithm, 0 otherwise. - * This macro may return either 0 or 1 if \p alg is not a supported - * algorithm identifier. - */ -#define PSA_ALG_IS_MAC(alg) \ - (((alg) & PSA_ALG_CATEGORY_MASK) == PSA_ALG_CATEGORY_MAC) - -/** Whether the specified algorithm is a symmetric cipher algorithm. - * - * \param alg An algorithm identifier (value of type #psa_algorithm_t). - * - * \return 1 if \p alg is a symmetric cipher algorithm, 0 otherwise. - * This macro may return either 0 or 1 if \p alg is not a supported - * algorithm identifier. - */ -#define PSA_ALG_IS_CIPHER(alg) \ - (((alg) & PSA_ALG_CATEGORY_MASK) == PSA_ALG_CATEGORY_CIPHER) - -/** Whether the specified algorithm is an authenticated encryption - * with associated data (AEAD) algorithm. - * - * \param alg An algorithm identifier (value of type #psa_algorithm_t). - * - * \return 1 if \p alg is an AEAD algorithm, 0 otherwise. - * This macro may return either 0 or 1 if \p alg is not a supported - * algorithm identifier. - */ -#define PSA_ALG_IS_AEAD(alg) \ - (((alg) & PSA_ALG_CATEGORY_MASK) == PSA_ALG_CATEGORY_AEAD) - -/** Whether the specified algorithm is an asymmetric signature algorithm, - * also known as public-key signature algorithm. - * - * \param alg An algorithm identifier (value of type #psa_algorithm_t). - * - * \return 1 if \p alg is an asymmetric signature algorithm, 0 otherwise. - * This macro may return either 0 or 1 if \p alg is not a supported - * algorithm identifier. - */ -#define PSA_ALG_IS_SIGN(alg) \ - (((alg) & PSA_ALG_CATEGORY_MASK) == PSA_ALG_CATEGORY_SIGN) - -/** Whether the specified algorithm is an asymmetric encryption algorithm, - * also known as public-key encryption algorithm. - * - * \param alg An algorithm identifier (value of type #psa_algorithm_t). - * - * \return 1 if \p alg is an asymmetric encryption algorithm, 0 otherwise. - * This macro may return either 0 or 1 if \p alg is not a supported - * algorithm identifier. - */ -#define PSA_ALG_IS_ASYMMETRIC_ENCRYPTION(alg) \ - (((alg) & PSA_ALG_CATEGORY_MASK) == PSA_ALG_CATEGORY_ASYMMETRIC_ENCRYPTION) - -/** Whether the specified algorithm is a key agreement algorithm. - * - * \param alg An algorithm identifier (value of type #psa_algorithm_t). - * - * \return 1 if \p alg is a key agreement algorithm, 0 otherwise. - * This macro may return either 0 or 1 if \p alg is not a supported - * algorithm identifier. - */ -#define PSA_ALG_IS_KEY_AGREEMENT(alg) \ - (((alg) & PSA_ALG_CATEGORY_MASK) == PSA_ALG_CATEGORY_KEY_AGREEMENT) - -/** Whether the specified algorithm is a key derivation algorithm. - * - * \param alg An algorithm identifier (value of type #psa_algorithm_t). - * - * \return 1 if \p alg is a key derivation algorithm, 0 otherwise. - * This macro may return either 0 or 1 if \p alg is not a supported - * algorithm identifier. - */ -#define PSA_ALG_IS_KEY_DERIVATION(alg) \ - (((alg) & PSA_ALG_CATEGORY_MASK) == PSA_ALG_CATEGORY_KEY_DERIVATION) - -#define PSA_ALG_HASH_MASK ((psa_algorithm_t)0x000000ff) -/** MD2 */ -#define PSA_ALG_MD2 ((psa_algorithm_t)0x02000001) -/** MD4 */ -#define PSA_ALG_MD4 ((psa_algorithm_t)0x02000002) -/** MD5 */ -#define PSA_ALG_MD5 ((psa_algorithm_t)0x02000003) -/** PSA_ALG_RIPEMD160 */ -#define PSA_ALG_RIPEMD160 ((psa_algorithm_t)0x02000004) -/** SHA1 */ -#define PSA_ALG_SHA_1 ((psa_algorithm_t)0x02000005) -/** SHA2-224 */ -#define PSA_ALG_SHA_224 ((psa_algorithm_t)0x02000008) -/** SHA2-256 */ -#define PSA_ALG_SHA_256 ((psa_algorithm_t)0x02000009) -/** SHA2-384 */ -#define PSA_ALG_SHA_384 ((psa_algorithm_t)0x0200000a) -/** SHA2-512 */ -#define PSA_ALG_SHA_512 ((psa_algorithm_t)0x0200000b) -/** SHA2-512/224 */ -#define PSA_ALG_SHA_512_224 ((psa_algorithm_t)0x0200000c) -/** SHA2-512/256 */ -#define PSA_ALG_SHA_512_256 ((psa_algorithm_t)0x0200000d) -/** SHA3-224 */ -#define PSA_ALG_SHA3_224 ((psa_algorithm_t)0x02000010) -/** SHA3-256 */ -#define PSA_ALG_SHA3_256 ((psa_algorithm_t)0x02000011) -/** SHA3-384 */ -#define PSA_ALG_SHA3_384 ((psa_algorithm_t)0x02000012) -/** SHA3-512 */ -#define PSA_ALG_SHA3_512 ((psa_algorithm_t)0x02000013) -/** The first 512 bits (64 bytes) of the SHAKE256 output. - * - * This is the prehashing for Ed448ph (see #PSA_ALG_ED448PH). For other - * scenarios where a hash function based on SHA3/SHAKE is desired, SHA3-512 - * has the same output size and a (theoretically) higher security strength. - */ -#define PSA_ALG_SHAKE256_512 ((psa_algorithm_t)0x02000015) - -/** In a hash-and-sign algorithm policy, allow any hash algorithm. - * - * This value may be used to form the algorithm usage field of a policy - * for a signature algorithm that is parametrized by a hash. The key - * may then be used to perform operations using the same signature - * algorithm parametrized with any supported hash. - * - * That is, suppose that `PSA_xxx_SIGNATURE` is one of the following macros: - * - #PSA_ALG_RSA_PKCS1V15_SIGN, #PSA_ALG_RSA_PSS, - * - #PSA_ALG_ECDSA, #PSA_ALG_DETERMINISTIC_ECDSA. - * Then you may create and use a key as follows: - * - Set the key usage field using #PSA_ALG_ANY_HASH, for example: - * ``` - * psa_set_key_usage_flags(&attributes, PSA_KEY_USAGE_SIGN_HASH); // or VERIFY - * psa_set_key_algorithm(&attributes, PSA_xxx_SIGNATURE(PSA_ALG_ANY_HASH)); - * ``` - * - Import or generate key material. - * - Call psa_sign_hash() or psa_verify_hash(), passing - * an algorithm built from `PSA_xxx_SIGNATURE` and a specific hash. Each - * call to sign or verify a message may use a different hash. - * ``` - * psa_sign_hash(key, PSA_xxx_SIGNATURE(PSA_ALG_SHA_256), ...); - * psa_sign_hash(key, PSA_xxx_SIGNATURE(PSA_ALG_SHA_512), ...); - * psa_sign_hash(key, PSA_xxx_SIGNATURE(PSA_ALG_SHA3_256), ...); - * ``` - * - * This value may not be used to build other algorithms that are - * parametrized over a hash. For any valid use of this macro to build - * an algorithm \c alg, #PSA_ALG_IS_HASH_AND_SIGN(\c alg) is true. - * - * This value may not be used to build an algorithm specification to - * perform an operation. It is only valid to build policies. - */ -#define PSA_ALG_ANY_HASH ((psa_algorithm_t)0x020000ff) - -#define PSA_ALG_MAC_SUBCATEGORY_MASK ((psa_algorithm_t)0x00c00000) -#define PSA_ALG_HMAC_BASE ((psa_algorithm_t)0x03800000) -/** Macro to build an HMAC algorithm. - * - * For example, #PSA_ALG_HMAC(#PSA_ALG_SHA_256) is HMAC-SHA-256. - * - * \param hash_alg A hash algorithm (\c PSA_ALG_XXX value such that - * #PSA_ALG_IS_HASH(\p hash_alg) is true). - * - * \return The corresponding HMAC algorithm. - * \return Unspecified if \p hash_alg is not a supported - * hash algorithm. - */ -#define PSA_ALG_HMAC(hash_alg) \ - (PSA_ALG_HMAC_BASE | ((hash_alg) & PSA_ALG_HASH_MASK)) - -#define PSA_ALG_HMAC_GET_HASH(hmac_alg) \ - (PSA_ALG_CATEGORY_HASH | ((hmac_alg) & PSA_ALG_HASH_MASK)) - -/** Whether the specified algorithm is an HMAC algorithm. - * - * HMAC is a family of MAC algorithms that are based on a hash function. - * - * \param alg An algorithm identifier (value of type #psa_algorithm_t). - * - * \return 1 if \p alg is an HMAC algorithm, 0 otherwise. - * This macro may return either 0 or 1 if \p alg is not a supported - * algorithm identifier. - */ -#define PSA_ALG_IS_HMAC(alg) \ - (((alg) & (PSA_ALG_CATEGORY_MASK | PSA_ALG_MAC_SUBCATEGORY_MASK)) == \ - PSA_ALG_HMAC_BASE) - -/* In the encoding of a MAC algorithm, the bits corresponding to - * PSA_ALG_MAC_TRUNCATION_MASK encode the length to which the MAC is - * truncated. As an exception, the value 0 means the untruncated algorithm, - * whatever its length is. The length is encoded in 6 bits, so it can - * reach up to 63; the largest MAC is 64 bytes so its trivial truncation - * to full length is correctly encoded as 0 and any non-trivial truncation - * is correctly encoded as a value between 1 and 63. */ -#define PSA_ALG_MAC_TRUNCATION_MASK ((psa_algorithm_t)0x003f0000) -#define PSA_MAC_TRUNCATION_OFFSET 16 - -/* In the encoding of a MAC algorithm, the bit corresponding to - * #PSA_ALG_MAC_AT_LEAST_THIS_LENGTH_FLAG encodes the fact that the algorithm - * is a wildcard algorithm. A key with such wildcard algorithm as permitted - * algorithm policy can be used with any algorithm corresponding to the - * same base class and having a (potentially truncated) MAC length greater or - * equal than the one encoded in #PSA_ALG_MAC_TRUNCATION_MASK. */ -#define PSA_ALG_MAC_AT_LEAST_THIS_LENGTH_FLAG ((psa_algorithm_t)0x00008000) - -/** Macro to build a truncated MAC algorithm. - * - * A truncated MAC algorithm is identical to the corresponding MAC - * algorithm except that the MAC value for the truncated algorithm - * consists of only the first \p mac_length bytes of the MAC value - * for the untruncated algorithm. - * - * \note This macro may allow constructing algorithm identifiers that - * are not valid, either because the specified length is larger - * than the untruncated MAC or because the specified length is - * smaller than permitted by the implementation. - * - * \note It is implementation-defined whether a truncated MAC that - * is truncated to the same length as the MAC of the untruncated - * algorithm is considered identical to the untruncated algorithm - * for policy comparison purposes. - * - * \param mac_alg A MAC algorithm identifier (value of type - * #psa_algorithm_t such that #PSA_ALG_IS_MAC(\p mac_alg) - * is true). This may be a truncated or untruncated - * MAC algorithm. - * \param mac_length Desired length of the truncated MAC in bytes. - * This must be at most the full length of the MAC - * and must be at least an implementation-specified - * minimum. The implementation-specified minimum - * shall not be zero. - * - * \return The corresponding MAC algorithm with the specified - * length. - * \return Unspecified if \p mac_alg is not a supported - * MAC algorithm or if \p mac_length is too small or - * too large for the specified MAC algorithm. - */ -#define PSA_ALG_TRUNCATED_MAC(mac_alg, mac_length) \ - (((mac_alg) & ~(PSA_ALG_MAC_TRUNCATION_MASK | \ - PSA_ALG_MAC_AT_LEAST_THIS_LENGTH_FLAG)) | \ - ((mac_length) << PSA_MAC_TRUNCATION_OFFSET & PSA_ALG_MAC_TRUNCATION_MASK)) - -/** Macro to build the base MAC algorithm corresponding to a truncated - * MAC algorithm. - * - * \param mac_alg A MAC algorithm identifier (value of type - * #psa_algorithm_t such that #PSA_ALG_IS_MAC(\p mac_alg) - * is true). This may be a truncated or untruncated - * MAC algorithm. - * - * \return The corresponding base MAC algorithm. - * \return Unspecified if \p mac_alg is not a supported - * MAC algorithm. - */ -#define PSA_ALG_FULL_LENGTH_MAC(mac_alg) \ - ((mac_alg) & ~(PSA_ALG_MAC_TRUNCATION_MASK | \ - PSA_ALG_MAC_AT_LEAST_THIS_LENGTH_FLAG)) - -/** Length to which a MAC algorithm is truncated. - * - * \param mac_alg A MAC algorithm identifier (value of type - * #psa_algorithm_t such that #PSA_ALG_IS_MAC(\p mac_alg) - * is true). - * - * \return Length of the truncated MAC in bytes. - * \return 0 if \p mac_alg is a non-truncated MAC algorithm. - * \return Unspecified if \p mac_alg is not a supported - * MAC algorithm. - */ -#define PSA_MAC_TRUNCATED_LENGTH(mac_alg) \ - (((mac_alg) & PSA_ALG_MAC_TRUNCATION_MASK) >> PSA_MAC_TRUNCATION_OFFSET) - -/** Macro to build a MAC minimum-MAC-length wildcard algorithm. - * - * A minimum-MAC-length MAC wildcard algorithm permits all MAC algorithms - * sharing the same base algorithm, and where the (potentially truncated) MAC - * length of the specific algorithm is equal to or larger then the wildcard - * algorithm's minimum MAC length. - * - * \note When setting the minimum required MAC length to less than the - * smallest MAC length allowed by the base algorithm, this effectively - * becomes an 'any-MAC-length-allowed' policy for that base algorithm. - * - * \param mac_alg A MAC algorithm identifier (value of type - * #psa_algorithm_t such that #PSA_ALG_IS_MAC(\p mac_alg) - * is true). - * \param min_mac_length Desired minimum length of the message authentication - * code in bytes. This must be at most the untruncated - * length of the MAC and must be at least 1. - * - * \return The corresponding MAC wildcard algorithm with the - * specified minimum length. - * \return Unspecified if \p mac_alg is not a supported MAC - * algorithm or if \p min_mac_length is less than 1 or - * too large for the specified MAC algorithm. - */ -#define PSA_ALG_AT_LEAST_THIS_LENGTH_MAC(mac_alg, min_mac_length) \ - ( PSA_ALG_TRUNCATED_MAC(mac_alg, min_mac_length) | \ - PSA_ALG_MAC_AT_LEAST_THIS_LENGTH_FLAG ) - -#define PSA_ALG_CIPHER_MAC_BASE ((psa_algorithm_t)0x03c00000) -/** The CBC-MAC construction over a block cipher - * - * \warning CBC-MAC is insecure in many cases. - * A more secure mode, such as #PSA_ALG_CMAC, is recommended. - */ -#define PSA_ALG_CBC_MAC ((psa_algorithm_t)0x03c00100) -/** The CMAC construction over a block cipher */ -#define PSA_ALG_CMAC ((psa_algorithm_t)0x03c00200) - -/** Whether the specified algorithm is a MAC algorithm based on a block cipher. - * - * \param alg An algorithm identifier (value of type #psa_algorithm_t). - * - * \return 1 if \p alg is a MAC algorithm based on a block cipher, 0 otherwise. - * This macro may return either 0 or 1 if \p alg is not a supported - * algorithm identifier. - */ -#define PSA_ALG_IS_BLOCK_CIPHER_MAC(alg) \ - (((alg) & (PSA_ALG_CATEGORY_MASK | PSA_ALG_MAC_SUBCATEGORY_MASK)) == \ - PSA_ALG_CIPHER_MAC_BASE) - -#define PSA_ALG_CIPHER_STREAM_FLAG ((psa_algorithm_t)0x00800000) -#define PSA_ALG_CIPHER_FROM_BLOCK_FLAG ((psa_algorithm_t)0x00400000) - -/** Whether the specified algorithm is a stream cipher. - * - * A stream cipher is a symmetric cipher that encrypts or decrypts messages - * by applying a bitwise-xor with a stream of bytes that is generated - * from a key. - * - * \param alg An algorithm identifier (value of type #psa_algorithm_t). - * - * \return 1 if \p alg is a stream cipher algorithm, 0 otherwise. - * This macro may return either 0 or 1 if \p alg is not a supported - * algorithm identifier or if it is not a symmetric cipher algorithm. - */ -#define PSA_ALG_IS_STREAM_CIPHER(alg) \ - (((alg) & (PSA_ALG_CATEGORY_MASK | PSA_ALG_CIPHER_STREAM_FLAG)) == \ - (PSA_ALG_CATEGORY_CIPHER | PSA_ALG_CIPHER_STREAM_FLAG)) - -/** The stream cipher mode of a stream cipher algorithm. - * - * The underlying stream cipher is determined by the key type. - * - To use ChaCha20, use a key type of #PSA_KEY_TYPE_CHACHA20. - * - To use ARC4, use a key type of #PSA_KEY_TYPE_ARC4. - */ -#define PSA_ALG_STREAM_CIPHER ((psa_algorithm_t)0x04800100) - -/** The CTR stream cipher mode. - * - * CTR is a stream cipher which is built from a block cipher. - * The underlying block cipher is determined by the key type. - * For example, to use AES-128-CTR, use this algorithm with - * a key of type #PSA_KEY_TYPE_AES and a length of 128 bits (16 bytes). - */ -#define PSA_ALG_CTR ((psa_algorithm_t)0x04c01000) - -/** The CFB stream cipher mode. - * - * The underlying block cipher is determined by the key type. - */ -#define PSA_ALG_CFB ((psa_algorithm_t)0x04c01100) - -/** The OFB stream cipher mode. - * - * The underlying block cipher is determined by the key type. - */ -#define PSA_ALG_OFB ((psa_algorithm_t)0x04c01200) - -/** The XTS cipher mode. - * - * XTS is a cipher mode which is built from a block cipher. It requires at - * least one full block of input, but beyond this minimum the input - * does not need to be a whole number of blocks. - */ -#define PSA_ALG_XTS ((psa_algorithm_t)0x0440ff00) - -/** The Electronic Code Book (ECB) mode of a block cipher, with no padding. - * - * \warning ECB mode does not protect the confidentiality of the encrypted data - * except in extremely narrow circumstances. It is recommended that applications - * only use ECB if they need to construct an operating mode that the - * implementation does not provide. Implementations are encouraged to provide - * the modes that applications need in preference to supporting direct access - * to ECB. - * - * The underlying block cipher is determined by the key type. - * - * This symmetric cipher mode can only be used with messages whose lengths are a - * multiple of the block size of the chosen block cipher. - * - * ECB mode does not accept an initialization vector (IV). When using a - * multi-part cipher operation with this algorithm, psa_cipher_generate_iv() - * and psa_cipher_set_iv() must not be called. - */ -#define PSA_ALG_ECB_NO_PADDING ((psa_algorithm_t)0x04404400) - -/** The CBC block cipher chaining mode, with no padding. - * - * The underlying block cipher is determined by the key type. - * - * This symmetric cipher mode can only be used with messages whose lengths - * are whole number of blocks for the chosen block cipher. - */ -#define PSA_ALG_CBC_NO_PADDING ((psa_algorithm_t)0x04404000) - -/** The CBC block cipher chaining mode with PKCS#7 padding. - * - * The underlying block cipher is determined by the key type. - * - * This is the padding method defined by PKCS#7 (RFC 2315) §10.3. - */ -#define PSA_ALG_CBC_PKCS7 ((psa_algorithm_t)0x04404100) - -#define PSA_ALG_AEAD_FROM_BLOCK_FLAG ((psa_algorithm_t)0x00400000) - -/** Whether the specified algorithm is an AEAD mode on a block cipher. - * - * \param alg An algorithm identifier (value of type #psa_algorithm_t). - * - * \return 1 if \p alg is an AEAD algorithm which is an AEAD mode based on - * a block cipher, 0 otherwise. - * This macro may return either 0 or 1 if \p alg is not a supported - * algorithm identifier. - */ -#define PSA_ALG_IS_AEAD_ON_BLOCK_CIPHER(alg) \ - (((alg) & (PSA_ALG_CATEGORY_MASK | PSA_ALG_AEAD_FROM_BLOCK_FLAG)) == \ - (PSA_ALG_CATEGORY_AEAD | PSA_ALG_AEAD_FROM_BLOCK_FLAG)) - -/** The CCM authenticated encryption algorithm. - * - * The underlying block cipher is determined by the key type. - */ -#define PSA_ALG_CCM ((psa_algorithm_t)0x05500100) - -/** The GCM authenticated encryption algorithm. - * - * The underlying block cipher is determined by the key type. - */ -#define PSA_ALG_GCM ((psa_algorithm_t)0x05500200) - -/** The Chacha20-Poly1305 AEAD algorithm. - * - * The ChaCha20_Poly1305 construction is defined in RFC 7539. - * - * Implementations must support 12-byte nonces, may support 8-byte nonces, - * and should reject other sizes. - * - * Implementations must support 16-byte tags and should reject other sizes. - */ -#define PSA_ALG_CHACHA20_POLY1305 ((psa_algorithm_t)0x05100500) - -/* In the encoding of a AEAD algorithm, the bits corresponding to - * PSA_ALG_AEAD_TAG_LENGTH_MASK encode the length of the AEAD tag. - * The constants for default lengths follow this encoding. - */ -#define PSA_ALG_AEAD_TAG_LENGTH_MASK ((psa_algorithm_t)0x003f0000) -#define PSA_AEAD_TAG_LENGTH_OFFSET 16 - -/* In the encoding of an AEAD algorithm, the bit corresponding to - * #PSA_ALG_AEAD_AT_LEAST_THIS_LENGTH_FLAG encodes the fact that the algorithm - * is a wildcard algorithm. A key with such wildcard algorithm as permitted - * algorithm policy can be used with any algorithm corresponding to the - * same base class and having a tag length greater than or equal to the one - * encoded in #PSA_ALG_AEAD_TAG_LENGTH_MASK. */ -#define PSA_ALG_AEAD_AT_LEAST_THIS_LENGTH_FLAG ((psa_algorithm_t)0x00008000) - -/** Macro to build a shortened AEAD algorithm. - * - * A shortened AEAD algorithm is similar to the corresponding AEAD - * algorithm, but has an authentication tag that consists of fewer bytes. - * Depending on the algorithm, the tag length may affect the calculation - * of the ciphertext. - * - * \param aead_alg An AEAD algorithm identifier (value of type - * #psa_algorithm_t such that #PSA_ALG_IS_AEAD(\p aead_alg) - * is true). - * \param tag_length Desired length of the authentication tag in bytes. - * - * \return The corresponding AEAD algorithm with the specified - * length. - * \return Unspecified if \p aead_alg is not a supported - * AEAD algorithm or if \p tag_length is not valid - * for the specified AEAD algorithm. - */ -#define PSA_ALG_AEAD_WITH_SHORTENED_TAG(aead_alg, tag_length) \ - (((aead_alg) & ~(PSA_ALG_AEAD_TAG_LENGTH_MASK | \ - PSA_ALG_AEAD_AT_LEAST_THIS_LENGTH_FLAG)) | \ - ((tag_length) << PSA_AEAD_TAG_LENGTH_OFFSET & \ - PSA_ALG_AEAD_TAG_LENGTH_MASK)) - -/** Retrieve the tag length of a specified AEAD algorithm - * - * \param aead_alg An AEAD algorithm identifier (value of type - * #psa_algorithm_t such that #PSA_ALG_IS_AEAD(\p aead_alg) - * is true). - * - * \return The tag length specified by the input algorithm. - * \return Unspecified if \p aead_alg is not a supported - * AEAD algorithm. - */ -#define PSA_ALG_AEAD_GET_TAG_LENGTH(aead_alg) \ - (((aead_alg) & PSA_ALG_AEAD_TAG_LENGTH_MASK) >> \ - PSA_AEAD_TAG_LENGTH_OFFSET ) - -/** Calculate the corresponding AEAD algorithm with the default tag length. - * - * \param aead_alg An AEAD algorithm (\c PSA_ALG_XXX value such that - * #PSA_ALG_IS_AEAD(\p aead_alg) is true). - * - * \return The corresponding AEAD algorithm with the default - * tag length for that algorithm. - */ -#define PSA_ALG_AEAD_WITH_DEFAULT_LENGTH_TAG(aead_alg) \ - ( \ - PSA_ALG_AEAD_WITH_DEFAULT_LENGTH_TAG_CASE(aead_alg, PSA_ALG_CCM) \ - PSA_ALG_AEAD_WITH_DEFAULT_LENGTH_TAG_CASE(aead_alg, PSA_ALG_GCM) \ - PSA_ALG_AEAD_WITH_DEFAULT_LENGTH_TAG_CASE(aead_alg, PSA_ALG_CHACHA20_POLY1305) \ - 0) -#define PSA_ALG_AEAD_WITH_DEFAULT_LENGTH_TAG_CASE(aead_alg, ref) \ - PSA_ALG_AEAD_WITH_SHORTENED_TAG(aead_alg, 0) == \ - PSA_ALG_AEAD_WITH_SHORTENED_TAG(ref, 0) ? \ - ref : - -/** Macro to build an AEAD minimum-tag-length wildcard algorithm. - * - * A minimum-tag-length AEAD wildcard algorithm permits all AEAD algorithms - * sharing the same base algorithm, and where the tag length of the specific - * algorithm is equal to or larger then the minimum tag length specified by the - * wildcard algorithm. - * - * \note When setting the minimum required tag length to less than the - * smallest tag length allowed by the base algorithm, this effectively - * becomes an 'any-tag-length-allowed' policy for that base algorithm. - * - * \param aead_alg An AEAD algorithm identifier (value of type - * #psa_algorithm_t such that - * #PSA_ALG_IS_AEAD(\p aead_alg) is true). - * \param min_tag_length Desired minimum length of the authentication tag in - * bytes. This must be at least 1 and at most the largest - * allowed tag length of the algorithm. - * - * \return The corresponding AEAD wildcard algorithm with the - * specified minimum length. - * \return Unspecified if \p aead_alg is not a supported - * AEAD algorithm or if \p min_tag_length is less than 1 - * or too large for the specified AEAD algorithm. - */ -#define PSA_ALG_AEAD_WITH_AT_LEAST_THIS_LENGTH_TAG(aead_alg, min_tag_length) \ - ( PSA_ALG_AEAD_WITH_SHORTENED_TAG(aead_alg, min_tag_length) | \ - PSA_ALG_AEAD_AT_LEAST_THIS_LENGTH_FLAG ) - -#define PSA_ALG_RSA_PKCS1V15_SIGN_BASE ((psa_algorithm_t)0x06000200) -/** RSA PKCS#1 v1.5 signature with hashing. - * - * This is the signature scheme defined by RFC 8017 - * (PKCS#1: RSA Cryptography Specifications) under the name - * RSASSA-PKCS1-v1_5. - * - * \param hash_alg A hash algorithm (\c PSA_ALG_XXX value such that - * #PSA_ALG_IS_HASH(\p hash_alg) is true). - * This includes #PSA_ALG_ANY_HASH - * when specifying the algorithm in a usage policy. - * - * \return The corresponding RSA PKCS#1 v1.5 signature algorithm. - * \return Unspecified if \p hash_alg is not a supported - * hash algorithm. - */ -#define PSA_ALG_RSA_PKCS1V15_SIGN(hash_alg) \ - (PSA_ALG_RSA_PKCS1V15_SIGN_BASE | ((hash_alg) & PSA_ALG_HASH_MASK)) -/** Raw PKCS#1 v1.5 signature. - * - * The input to this algorithm is the DigestInfo structure used by - * RFC 8017 (PKCS#1: RSA Cryptography Specifications), §9.2 - * steps 3–6. - */ -#define PSA_ALG_RSA_PKCS1V15_SIGN_RAW PSA_ALG_RSA_PKCS1V15_SIGN_BASE -#define PSA_ALG_IS_RSA_PKCS1V15_SIGN(alg) \ - (((alg) & ~PSA_ALG_HASH_MASK) == PSA_ALG_RSA_PKCS1V15_SIGN_BASE) - -#define PSA_ALG_RSA_PSS_BASE ((psa_algorithm_t)0x06000300) -/** RSA PSS signature with hashing. - * - * This is the signature scheme defined by RFC 8017 - * (PKCS#1: RSA Cryptography Specifications) under the name - * RSASSA-PSS, with the message generation function MGF1, and with - * a salt length equal to the length of the hash. The specified - * hash algorithm is used to hash the input message, to create the - * salted hash, and for the mask generation. - * - * \param hash_alg A hash algorithm (\c PSA_ALG_XXX value such that - * #PSA_ALG_IS_HASH(\p hash_alg) is true). - * This includes #PSA_ALG_ANY_HASH - * when specifying the algorithm in a usage policy. - * - * \return The corresponding RSA PSS signature algorithm. - * \return Unspecified if \p hash_alg is not a supported - * hash algorithm. - */ -#define PSA_ALG_RSA_PSS(hash_alg) \ - (PSA_ALG_RSA_PSS_BASE | ((hash_alg) & PSA_ALG_HASH_MASK)) -#define PSA_ALG_IS_RSA_PSS(alg) \ - (((alg) & ~PSA_ALG_HASH_MASK) == PSA_ALG_RSA_PSS_BASE) - -#define PSA_ALG_ECDSA_BASE ((psa_algorithm_t)0x06000600) -/** ECDSA signature with hashing. - * - * This is the ECDSA signature scheme defined by ANSI X9.62, - * with a random per-message secret number (*k*). - * - * The representation of the signature as a byte string consists of - * the concatentation of the signature values *r* and *s*. Each of - * *r* and *s* is encoded as an *N*-octet string, where *N* is the length - * of the base point of the curve in octets. Each value is represented - * in big-endian order (most significant octet first). - * - * \param hash_alg A hash algorithm (\c PSA_ALG_XXX value such that - * #PSA_ALG_IS_HASH(\p hash_alg) is true). - * This includes #PSA_ALG_ANY_HASH - * when specifying the algorithm in a usage policy. - * - * \return The corresponding ECDSA signature algorithm. - * \return Unspecified if \p hash_alg is not a supported - * hash algorithm. - */ -#define PSA_ALG_ECDSA(hash_alg) \ - (PSA_ALG_ECDSA_BASE | ((hash_alg) & PSA_ALG_HASH_MASK)) -/** ECDSA signature without hashing. - * - * This is the same signature scheme as #PSA_ALG_ECDSA(), but - * without specifying a hash algorithm. This algorithm may only be - * used to sign or verify a sequence of bytes that should be an - * already-calculated hash. Note that the input is padded with - * zeros on the left or truncated on the left as required to fit - * the curve size. - */ -#define PSA_ALG_ECDSA_ANY PSA_ALG_ECDSA_BASE -#define PSA_ALG_DETERMINISTIC_ECDSA_BASE ((psa_algorithm_t)0x06000700) -/** Deterministic ECDSA signature with hashing. - * - * This is the deterministic ECDSA signature scheme defined by RFC 6979. - * - * The representation of a signature is the same as with #PSA_ALG_ECDSA(). - * - * Note that when this algorithm is used for verification, signatures - * made with randomized ECDSA (#PSA_ALG_ECDSA(\p hash_alg)) with the - * same private key are accepted. In other words, - * #PSA_ALG_DETERMINISTIC_ECDSA(\p hash_alg) differs from - * #PSA_ALG_ECDSA(\p hash_alg) only for signature, not for verification. - * - * \param hash_alg A hash algorithm (\c PSA_ALG_XXX value such that - * #PSA_ALG_IS_HASH(\p hash_alg) is true). - * This includes #PSA_ALG_ANY_HASH - * when specifying the algorithm in a usage policy. - * - * \return The corresponding deterministic ECDSA signature - * algorithm. - * \return Unspecified if \p hash_alg is not a supported - * hash algorithm. - */ -#define PSA_ALG_DETERMINISTIC_ECDSA(hash_alg) \ - (PSA_ALG_DETERMINISTIC_ECDSA_BASE | ((hash_alg) & PSA_ALG_HASH_MASK)) -#define PSA_ALG_ECDSA_DETERMINISTIC_FLAG ((psa_algorithm_t)0x00000100) -#define PSA_ALG_IS_ECDSA(alg) \ - (((alg) & ~PSA_ALG_HASH_MASK & ~PSA_ALG_ECDSA_DETERMINISTIC_FLAG) == \ - PSA_ALG_ECDSA_BASE) -#define PSA_ALG_ECDSA_IS_DETERMINISTIC(alg) \ - (((alg) & PSA_ALG_ECDSA_DETERMINISTIC_FLAG) != 0) -#define PSA_ALG_IS_DETERMINISTIC_ECDSA(alg) \ - (PSA_ALG_IS_ECDSA(alg) && PSA_ALG_ECDSA_IS_DETERMINISTIC(alg)) -#define PSA_ALG_IS_RANDOMIZED_ECDSA(alg) \ - (PSA_ALG_IS_ECDSA(alg) && !PSA_ALG_ECDSA_IS_DETERMINISTIC(alg)) - -/** Edwards-curve digital signature algorithm without prehashing (PureEdDSA), - * using standard parameters. - * - * Contexts are not supported in the current version of this specification - * because there is no suitable signature interface that can take the - * context as a parameter. A future version of this specification may add - * suitable functions and extend this algorithm to support contexts. - * - * PureEdDSA requires an elliptic curve key on a twisted Edwards curve. - * In this specification, the following curves are supported: - * - #PSA_ECC_FAMILY_TWISTED_EDWARDS, 255-bit: Ed25519 as specified - * in RFC 8032. - * The curve is Edwards25519. - * The hash function used internally is SHA-512. - * - #PSA_ECC_FAMILY_TWISTED_EDWARDS, 448-bit: Ed448 as specified - * in RFC 8032. - * The curve is Edwards448. - * The hash function used internally is the first 114 bytes of the - * SHAKE256 output. - * - * This algorithm can be used with psa_sign_message() and - * psa_verify_message(). Since there is no prehashing, it cannot be used - * with psa_sign_hash() or psa_verify_hash(). - * - * The signature format is the concatenation of R and S as defined by - * RFC 8032 §5.1.6 and §5.2.6 (a 64-byte string for Ed25519, a 114-byte - * string for Ed448). - */ -#define PSA_ALG_PURE_EDDSA ((psa_algorithm_t)0x06000800) - -#define PSA_ALG_HASH_EDDSA_BASE ((psa_algorithm_t)0x06000900) -#define PSA_ALG_IS_HASH_EDDSA(alg) \ - (((alg) & ~PSA_ALG_HASH_MASK) == PSA_ALG_HASH_EDDSA_BASE) - -/** Edwards-curve digital signature algorithm with prehashing (HashEdDSA), - * using SHA-512 and the Edwards25519 curve. - * - * See #PSA_ALG_PURE_EDDSA regarding context support and the signature format. - * - * This algorithm is Ed25519 as specified in RFC 8032. - * The curve is Edwards25519. - * The prehash is SHA-512. - * The hash function used internally is SHA-512. - * - * This is a hash-and-sign algorithm: to calculate a signature, - * you can either: - * - call psa_sign_message() on the message; - * - or calculate the SHA-512 hash of the message - * with psa_hash_compute() - * or with a multi-part hash operation started with psa_hash_setup(), - * using the hash algorithm #PSA_ALG_SHA_512, - * then sign the calculated hash with psa_sign_hash(). - * Verifying a signature is similar, using psa_verify_message() or - * psa_verify_hash() instead of the signature function. - */ -#define PSA_ALG_ED25519PH \ - (PSA_ALG_HASH_EDDSA_BASE | (PSA_ALG_SHA_512 & PSA_ALG_HASH_MASK)) - -/** Edwards-curve digital signature algorithm with prehashing (HashEdDSA), - * using SHAKE256 and the Edwards448 curve. - * - * See #PSA_ALG_PURE_EDDSA regarding context support and the signature format. - * - * This algorithm is Ed448 as specified in RFC 8032. - * The curve is Edwards448. - * The prehash is the first 64 bytes of the SHAKE256 output. - * The hash function used internally is the first 114 bytes of the - * SHAKE256 output. - * - * This is a hash-and-sign algorithm: to calculate a signature, - * you can either: - * - call psa_sign_message() on the message; - * - or calculate the first 64 bytes of the SHAKE256 output of the message - * with psa_hash_compute() - * or with a multi-part hash operation started with psa_hash_setup(), - * using the hash algorithm #PSA_ALG_SHAKE256_512, - * then sign the calculated hash with psa_sign_hash(). - * Verifying a signature is similar, using psa_verify_message() or - * psa_verify_hash() instead of the signature function. - */ -#define PSA_ALG_ED448PH \ - (PSA_ALG_HASH_EDDSA_BASE | (PSA_ALG_SHAKE256_512 & PSA_ALG_HASH_MASK)) - -/* Default definition, to be overridden if the library is extended with - * more hash-and-sign algorithms that we want to keep out of this header - * file. */ -#define PSA_ALG_IS_VENDOR_HASH_AND_SIGN(alg) 0 - -/** Whether the specified algorithm is a hash-and-sign algorithm. - * - * Hash-and-sign algorithms are asymmetric (public-key) signature algorithms - * structured in two parts: first the calculation of a hash in a way that - * does not depend on the key, then the calculation of a signature from the - * hash value and the key. - * - * \param alg An algorithm identifier (value of type #psa_algorithm_t). - * - * \return 1 if \p alg is a hash-and-sign algorithm, 0 otherwise. - * This macro may return either 0 or 1 if \p alg is not a supported - * algorithm identifier. - */ -#define PSA_ALG_IS_HASH_AND_SIGN(alg) \ - (PSA_ALG_IS_RSA_PSS(alg) || PSA_ALG_IS_RSA_PKCS1V15_SIGN(alg) || \ - PSA_ALG_IS_ECDSA(alg) || PSA_ALG_IS_HASH_EDDSA(alg) || \ - PSA_ALG_IS_VENDOR_HASH_AND_SIGN(alg)) - -/** Whether the specified algorithm is a signature algorithm that can be used - * with psa_sign_message() and psa_verify_message(). - * - * \param alg An algorithm identifier (value of type #psa_algorithm_t). - * - * \return 1 if alg is a signature algorithm that can be used to sign a - * message. 0 if \p alg is a signature algorithm that can only be used - * to sign an already-calculated hash. 0 if \p alg is not a signature - * algorithm. This macro can return either 0 or 1 if \p alg is not a - * supported algorithm identifier. - */ -#define PSA_ALG_IS_SIGN_MESSAGE(alg) \ - (PSA_ALG_IS_HASH_AND_SIGN(alg) || (alg) == PSA_ALG_PURE_EDDSA ) - -/** Get the hash used by a hash-and-sign signature algorithm. - * - * A hash-and-sign algorithm is a signature algorithm which is - * composed of two phases: first a hashing phase which does not use - * the key and produces a hash of the input message, then a signing - * phase which only uses the hash and the key and not the message - * itself. - * - * \param alg A signature algorithm (\c PSA_ALG_XXX value such that - * #PSA_ALG_IS_SIGN(\p alg) is true). - * - * \return The underlying hash algorithm if \p alg is a hash-and-sign - * algorithm. - * \return 0 if \p alg is a signature algorithm that does not - * follow the hash-and-sign structure. - * \return Unspecified if \p alg is not a signature algorithm or - * if it is not supported by the implementation. - */ -#define PSA_ALG_SIGN_GET_HASH(alg) \ - (PSA_ALG_IS_HASH_AND_SIGN(alg) ? \ - ((alg) & PSA_ALG_HASH_MASK) == 0 ? /*"raw" algorithm*/ 0 : \ - ((alg) & PSA_ALG_HASH_MASK) | PSA_ALG_CATEGORY_HASH : \ - 0) - -/** RSA PKCS#1 v1.5 encryption. - */ -#define PSA_ALG_RSA_PKCS1V15_CRYPT ((psa_algorithm_t)0x07000200) - -#define PSA_ALG_RSA_OAEP_BASE ((psa_algorithm_t)0x07000300) -/** RSA OAEP encryption. - * - * This is the encryption scheme defined by RFC 8017 - * (PKCS#1: RSA Cryptography Specifications) under the name - * RSAES-OAEP, with the message generation function MGF1. - * - * \param hash_alg The hash algorithm (\c PSA_ALG_XXX value such that - * #PSA_ALG_IS_HASH(\p hash_alg) is true) to use - * for MGF1. - * - * \return The corresponding RSA OAEP encryption algorithm. - * \return Unspecified if \p hash_alg is not a supported - * hash algorithm. - */ -#define PSA_ALG_RSA_OAEP(hash_alg) \ - (PSA_ALG_RSA_OAEP_BASE | ((hash_alg) & PSA_ALG_HASH_MASK)) -#define PSA_ALG_IS_RSA_OAEP(alg) \ - (((alg) & ~PSA_ALG_HASH_MASK) == PSA_ALG_RSA_OAEP_BASE) -#define PSA_ALG_RSA_OAEP_GET_HASH(alg) \ - (PSA_ALG_IS_RSA_OAEP(alg) ? \ - ((alg) & PSA_ALG_HASH_MASK) | PSA_ALG_CATEGORY_HASH : \ - 0) - -#define PSA_ALG_HKDF_BASE ((psa_algorithm_t)0x08000100) -/** Macro to build an HKDF algorithm. - * - * For example, `PSA_ALG_HKDF(PSA_ALG_SHA256)` is HKDF using HMAC-SHA-256. - * - * This key derivation algorithm uses the following inputs: - * - #PSA_KEY_DERIVATION_INPUT_SALT is the salt used in the "extract" step. - * It is optional; if omitted, the derivation uses an empty salt. - * - #PSA_KEY_DERIVATION_INPUT_SECRET is the secret key used in the "extract" step. - * - #PSA_KEY_DERIVATION_INPUT_INFO is the info string used in the "expand" step. - * You must pass #PSA_KEY_DERIVATION_INPUT_SALT before #PSA_KEY_DERIVATION_INPUT_SECRET. - * You may pass #PSA_KEY_DERIVATION_INPUT_INFO at any time after steup and before - * starting to generate output. - * - * \param hash_alg A hash algorithm (\c PSA_ALG_XXX value such that - * #PSA_ALG_IS_HASH(\p hash_alg) is true). - * - * \return The corresponding HKDF algorithm. - * \return Unspecified if \p hash_alg is not a supported - * hash algorithm. - */ -#define PSA_ALG_HKDF(hash_alg) \ - (PSA_ALG_HKDF_BASE | ((hash_alg) & PSA_ALG_HASH_MASK)) -/** Whether the specified algorithm is an HKDF algorithm. - * - * HKDF is a family of key derivation algorithms that are based on a hash - * function and the HMAC construction. - * - * \param alg An algorithm identifier (value of type #psa_algorithm_t). - * - * \return 1 if \c alg is an HKDF algorithm, 0 otherwise. - * This macro may return either 0 or 1 if \c alg is not a supported - * key derivation algorithm identifier. - */ -#define PSA_ALG_IS_HKDF(alg) \ - (((alg) & ~PSA_ALG_HASH_MASK) == PSA_ALG_HKDF_BASE) -#define PSA_ALG_HKDF_GET_HASH(hkdf_alg) \ - (PSA_ALG_CATEGORY_HASH | ((hkdf_alg) & PSA_ALG_HASH_MASK)) - -#define PSA_ALG_TLS12_PRF_BASE ((psa_algorithm_t)0x08000200) -/** Macro to build a TLS-1.2 PRF algorithm. - * - * TLS 1.2 uses a custom pseudorandom function (PRF) for key schedule, - * specified in Section 5 of RFC 5246. It is based on HMAC and can be - * used with either SHA-256 or SHA-384. - * - * This key derivation algorithm uses the following inputs, which must be - * passed in the order given here: - * - #PSA_KEY_DERIVATION_INPUT_SEED is the seed. - * - #PSA_KEY_DERIVATION_INPUT_SECRET is the secret key. - * - #PSA_KEY_DERIVATION_INPUT_LABEL is the label. - * - * For the application to TLS-1.2 key expansion, the seed is the - * concatenation of ServerHello.Random + ClientHello.Random, - * and the label is "key expansion". - * - * For example, `PSA_ALG_TLS12_PRF(PSA_ALG_SHA256)` represents the - * TLS 1.2 PRF using HMAC-SHA-256. - * - * \param hash_alg A hash algorithm (\c PSA_ALG_XXX value such that - * #PSA_ALG_IS_HASH(\p hash_alg) is true). - * - * \return The corresponding TLS-1.2 PRF algorithm. - * \return Unspecified if \p hash_alg is not a supported - * hash algorithm. - */ -#define PSA_ALG_TLS12_PRF(hash_alg) \ - (PSA_ALG_TLS12_PRF_BASE | ((hash_alg) & PSA_ALG_HASH_MASK)) - -/** Whether the specified algorithm is a TLS-1.2 PRF algorithm. - * - * \param alg An algorithm identifier (value of type #psa_algorithm_t). - * - * \return 1 if \c alg is a TLS-1.2 PRF algorithm, 0 otherwise. - * This macro may return either 0 or 1 if \c alg is not a supported - * key derivation algorithm identifier. - */ -#define PSA_ALG_IS_TLS12_PRF(alg) \ - (((alg) & ~PSA_ALG_HASH_MASK) == PSA_ALG_TLS12_PRF_BASE) -#define PSA_ALG_TLS12_PRF_GET_HASH(hkdf_alg) \ - (PSA_ALG_CATEGORY_HASH | ((hkdf_alg) & PSA_ALG_HASH_MASK)) - -#define PSA_ALG_TLS12_PSK_TO_MS_BASE ((psa_algorithm_t)0x08000300) -/** Macro to build a TLS-1.2 PSK-to-MasterSecret algorithm. - * - * In a pure-PSK handshake in TLS 1.2, the master secret is derived - * from the PreSharedKey (PSK) through the application of padding - * (RFC 4279, Section 2) and the TLS-1.2 PRF (RFC 5246, Section 5). - * The latter is based on HMAC and can be used with either SHA-256 - * or SHA-384. - * - * This key derivation algorithm uses the following inputs, which must be - * passed in the order given here: - * - #PSA_KEY_DERIVATION_INPUT_SEED is the seed. - * - #PSA_KEY_DERIVATION_INPUT_SECRET is the secret key. - * - #PSA_KEY_DERIVATION_INPUT_LABEL is the label. - * - * For the application to TLS-1.2, the seed (which is - * forwarded to the TLS-1.2 PRF) is the concatenation of the - * ClientHello.Random + ServerHello.Random, - * and the label is "master secret" or "extended master secret". - * - * For example, `PSA_ALG_TLS12_PSK_TO_MS(PSA_ALG_SHA256)` represents the - * TLS-1.2 PSK to MasterSecret derivation PRF using HMAC-SHA-256. - * - * \param hash_alg A hash algorithm (\c PSA_ALG_XXX value such that - * #PSA_ALG_IS_HASH(\p hash_alg) is true). - * - * \return The corresponding TLS-1.2 PSK to MS algorithm. - * \return Unspecified if \p hash_alg is not a supported - * hash algorithm. - */ -#define PSA_ALG_TLS12_PSK_TO_MS(hash_alg) \ - (PSA_ALG_TLS12_PSK_TO_MS_BASE | ((hash_alg) & PSA_ALG_HASH_MASK)) - -/** Whether the specified algorithm is a TLS-1.2 PSK to MS algorithm. - * - * \param alg An algorithm identifier (value of type #psa_algorithm_t). - * - * \return 1 if \c alg is a TLS-1.2 PSK to MS algorithm, 0 otherwise. - * This macro may return either 0 or 1 if \c alg is not a supported - * key derivation algorithm identifier. - */ -#define PSA_ALG_IS_TLS12_PSK_TO_MS(alg) \ - (((alg) & ~PSA_ALG_HASH_MASK) == PSA_ALG_TLS12_PSK_TO_MS_BASE) -#define PSA_ALG_TLS12_PSK_TO_MS_GET_HASH(hkdf_alg) \ - (PSA_ALG_CATEGORY_HASH | ((hkdf_alg) & PSA_ALG_HASH_MASK)) - -#define PSA_ALG_KEY_DERIVATION_MASK ((psa_algorithm_t)0xfe00ffff) -#define PSA_ALG_KEY_AGREEMENT_MASK ((psa_algorithm_t)0xffff0000) - -/** Macro to build a combined algorithm that chains a key agreement with - * a key derivation. - * - * \param ka_alg A key agreement algorithm (\c PSA_ALG_XXX value such - * that #PSA_ALG_IS_KEY_AGREEMENT(\p ka_alg) is true). - * \param kdf_alg A key derivation algorithm (\c PSA_ALG_XXX value such - * that #PSA_ALG_IS_KEY_DERIVATION(\p kdf_alg) is true). - * - * \return The corresponding key agreement and derivation - * algorithm. - * \return Unspecified if \p ka_alg is not a supported - * key agreement algorithm or \p kdf_alg is not a - * supported key derivation algorithm. - */ -#define PSA_ALG_KEY_AGREEMENT(ka_alg, kdf_alg) \ - ((ka_alg) | (kdf_alg)) - -#define PSA_ALG_KEY_AGREEMENT_GET_KDF(alg) \ - (((alg) & PSA_ALG_KEY_DERIVATION_MASK) | PSA_ALG_CATEGORY_KEY_DERIVATION) - -#define PSA_ALG_KEY_AGREEMENT_GET_BASE(alg) \ - (((alg) & PSA_ALG_KEY_AGREEMENT_MASK) | PSA_ALG_CATEGORY_KEY_AGREEMENT) - -/** Whether the specified algorithm is a raw key agreement algorithm. - * - * A raw key agreement algorithm is one that does not specify - * a key derivation function. - * Usually, raw key agreement algorithms are constructed directly with - * a \c PSA_ALG_xxx macro while non-raw key agreement algorithms are - * constructed with #PSA_ALG_KEY_AGREEMENT(). - * - * \param alg An algorithm identifier (value of type #psa_algorithm_t). - * - * \return 1 if \p alg is a raw key agreement algorithm, 0 otherwise. - * This macro may return either 0 or 1 if \p alg is not a supported - * algorithm identifier. - */ -#define PSA_ALG_IS_RAW_KEY_AGREEMENT(alg) \ - (PSA_ALG_IS_KEY_AGREEMENT(alg) && \ - PSA_ALG_KEY_AGREEMENT_GET_KDF(alg) == PSA_ALG_CATEGORY_KEY_DERIVATION) - -#define PSA_ALG_IS_KEY_DERIVATION_OR_AGREEMENT(alg) \ - ((PSA_ALG_IS_KEY_DERIVATION(alg) || PSA_ALG_IS_KEY_AGREEMENT(alg))) - -/** The finite-field Diffie-Hellman (DH) key agreement algorithm. - * - * The shared secret produced by key agreement is - * `g^{ab}` in big-endian format. - * It is `ceiling(m / 8)` bytes long where `m` is the size of the prime `p` - * in bits. - */ -#define PSA_ALG_FFDH ((psa_algorithm_t)0x09010000) - -/** Whether the specified algorithm is a finite field Diffie-Hellman algorithm. - * - * This includes the raw finite field Diffie-Hellman algorithm as well as - * finite-field Diffie-Hellman followed by any supporter key derivation - * algorithm. - * - * \param alg An algorithm identifier (value of type #psa_algorithm_t). - * - * \return 1 if \c alg is a finite field Diffie-Hellman algorithm, 0 otherwise. - * This macro may return either 0 or 1 if \c alg is not a supported - * key agreement algorithm identifier. - */ -#define PSA_ALG_IS_FFDH(alg) \ - (PSA_ALG_KEY_AGREEMENT_GET_BASE(alg) == PSA_ALG_FFDH) - -/** The elliptic curve Diffie-Hellman (ECDH) key agreement algorithm. - * - * The shared secret produced by key agreement is the x-coordinate of - * the shared secret point. It is always `ceiling(m / 8)` bytes long where - * `m` is the bit size associated with the curve, i.e. the bit size of the - * order of the curve's coordinate field. When `m` is not a multiple of 8, - * the byte containing the most significant bit of the shared secret - * is padded with zero bits. The byte order is either little-endian - * or big-endian depending on the curve type. - * - * - For Montgomery curves (curve types `PSA_ECC_FAMILY_CURVEXXX`), - * the shared secret is the x-coordinate of `d_A Q_B = d_B Q_A` - * in little-endian byte order. - * The bit size is 448 for Curve448 and 255 for Curve25519. - * - For Weierstrass curves over prime fields (curve types - * `PSA_ECC_FAMILY_SECPXXX` and `PSA_ECC_FAMILY_BRAINPOOL_PXXX`), - * the shared secret is the x-coordinate of `d_A Q_B = d_B Q_A` - * in big-endian byte order. - * The bit size is `m = ceiling(log_2(p))` for the field `F_p`. - * - For Weierstrass curves over binary fields (curve types - * `PSA_ECC_FAMILY_SECTXXX`), - * the shared secret is the x-coordinate of `d_A Q_B = d_B Q_A` - * in big-endian byte order. - * The bit size is `m` for the field `F_{2^m}`. - */ -#define PSA_ALG_ECDH ((psa_algorithm_t)0x09020000) - -/** Whether the specified algorithm is an elliptic curve Diffie-Hellman - * algorithm. - * - * This includes the raw elliptic curve Diffie-Hellman algorithm as well as - * elliptic curve Diffie-Hellman followed by any supporter key derivation - * algorithm. - * - * \param alg An algorithm identifier (value of type #psa_algorithm_t). - * - * \return 1 if \c alg is an elliptic curve Diffie-Hellman algorithm, - * 0 otherwise. - * This macro may return either 0 or 1 if \c alg is not a supported - * key agreement algorithm identifier. - */ -#define PSA_ALG_IS_ECDH(alg) \ - (PSA_ALG_KEY_AGREEMENT_GET_BASE(alg) == PSA_ALG_ECDH) - -/** Whether the specified algorithm encoding is a wildcard. - * - * Wildcard values may only be used to set the usage algorithm field in - * a policy, not to perform an operation. - * - * \param alg An algorithm identifier (value of type #psa_algorithm_t). - * - * \return 1 if \c alg is a wildcard algorithm encoding. - * \return 0 if \c alg is a non-wildcard algorithm encoding (suitable for - * an operation). - * \return This macro may return either 0 or 1 if \c alg is not a supported - * algorithm identifier. - */ -#define PSA_ALG_IS_WILDCARD(alg) \ - (PSA_ALG_IS_HASH_AND_SIGN(alg) ? \ - PSA_ALG_SIGN_GET_HASH(alg) == PSA_ALG_ANY_HASH : \ - PSA_ALG_IS_MAC(alg) ? \ - (alg & PSA_ALG_MAC_AT_LEAST_THIS_LENGTH_FLAG) != 0 : \ - PSA_ALG_IS_AEAD(alg) ? \ - (alg & PSA_ALG_AEAD_AT_LEAST_THIS_LENGTH_FLAG) != 0 : \ - (alg) == PSA_ALG_ANY_HASH) - -/**@}*/ - -/** \defgroup key_lifetimes Key lifetimes - * @{ - */ - -/** The default lifetime for volatile keys. - * - * A volatile key only exists as long as the identifier to it is not destroyed. - * The key material is guaranteed to be erased on a power reset. - * - * A key with this lifetime is typically stored in the RAM area of the - * PSA Crypto subsystem. However this is an implementation choice. - * If an implementation stores data about the key in a non-volatile memory, - * it must release all the resources associated with the key and erase the - * key material if the calling application terminates. - */ -#define PSA_KEY_LIFETIME_VOLATILE ((psa_key_lifetime_t)0x00000000) - -/** The default lifetime for persistent keys. - * - * A persistent key remains in storage until it is explicitly destroyed or - * until the corresponding storage area is wiped. This specification does - * not define any mechanism to wipe a storage area, but integrations may - * provide their own mechanism (for example to perform a factory reset, - * to prepare for device refurbishment, or to uninstall an application). - * - * This lifetime value is the default storage area for the calling - * application. Integrations of Mbed TLS may support other persistent lifetimes. - * See ::psa_key_lifetime_t for more information. - */ -#define PSA_KEY_LIFETIME_PERSISTENT ((psa_key_lifetime_t)0x00000001) - -/** The persistence level of volatile keys. - * - * See ::psa_key_persistence_t for more information. - */ -#define PSA_KEY_PERSISTENCE_VOLATILE ((psa_key_persistence_t)0x00) - -/** The default persistence level for persistent keys. - * - * See ::psa_key_persistence_t for more information. - */ -#define PSA_KEY_PERSISTENCE_DEFAULT ((psa_key_persistence_t)0x01) - -/** A persistence level indicating that a key is never destroyed. - * - * See ::psa_key_persistence_t for more information. - */ -#define PSA_KEY_PERSISTENCE_READ_ONLY ((psa_key_persistence_t)0xff) - -#define PSA_KEY_LIFETIME_GET_PERSISTENCE(lifetime) \ - ((psa_key_persistence_t)((lifetime) & 0x000000ff)) - -#define PSA_KEY_LIFETIME_GET_LOCATION(lifetime) \ - ((psa_key_location_t)((lifetime) >> 8)) - -/** Whether a key lifetime indicates that the key is volatile. - * - * A volatile key is automatically destroyed by the implementation when - * the application instance terminates. In particular, a volatile key - * is automatically destroyed on a power reset of the device. - * - * A key that is not volatile is persistent. Persistent keys are - * preserved until the application explicitly destroys them or until an - * implementation-specific device management event occurs (for example, - * a factory reset). - * - * \param lifetime The lifetime value to query (value of type - * ::psa_key_lifetime_t). - * - * \return \c 1 if the key is volatile, otherwise \c 0. - */ -#define PSA_KEY_LIFETIME_IS_VOLATILE(lifetime) \ - (PSA_KEY_LIFETIME_GET_PERSISTENCE(lifetime) == \ - PSA_KEY_PERSISTENCE_VOLATILE) - -/** Whether a key lifetime indicates that the key is read-only. - * - * Read-only keys cannot be created or destroyed through the PSA Crypto API. - * They must be created through platform-specific means that bypass the API. - * - * Some platforms may offer ways to destroy read-only keys. For example, - * consider a platform with multiple levels of privilege, where a - * low-privilege application can use a key but is not allowed to destroy - * it, and the platform exposes the key to the application with a read-only - * lifetime. High-privilege code can destroy the key even though the - * application sees the key as read-only. - * - * \param lifetime The lifetime value to query (value of type - * ::psa_key_lifetime_t). - * - * \return \c 1 if the key is read-only, otherwise \c 0. - */ -#define PSA_KEY_LIFETIME_IS_READ_ONLY(lifetime) \ - (PSA_KEY_LIFETIME_GET_PERSISTENCE(lifetime) == \ - PSA_KEY_PERSISTENCE_READ_ONLY) - -/** Construct a lifetime from a persistence level and a location. - * - * \param persistence The persistence level - * (value of type ::psa_key_persistence_t). - * \param location The location indicator - * (value of type ::psa_key_location_t). - * - * \return The constructed lifetime value. - */ -#define PSA_KEY_LIFETIME_FROM_PERSISTENCE_AND_LOCATION(persistence, location) \ - ((location) << 8 | (persistence)) - -/** The local storage area for persistent keys. - * - * This storage area is available on all systems that can store persistent - * keys without delegating the storage to a third-party cryptoprocessor. - * - * See ::psa_key_location_t for more information. - */ -#define PSA_KEY_LOCATION_LOCAL_STORAGE ((psa_key_location_t)0x000000) - -#define PSA_KEY_LOCATION_VENDOR_FLAG ((psa_key_location_t)0x800000) - -/** The minimum value for a key identifier chosen by the application. - */ -#define PSA_KEY_ID_USER_MIN ((psa_key_id_t)0x00000001) -/** The maximum value for a key identifier chosen by the application. - */ -#define PSA_KEY_ID_USER_MAX ((psa_key_id_t)0x3fffffff) -/** The minimum value for a key identifier chosen by the implementation. - */ -#define PSA_KEY_ID_VENDOR_MIN ((psa_key_id_t)0x40000000) -/** The maximum value for a key identifier chosen by the implementation. - */ -#define PSA_KEY_ID_VENDOR_MAX ((psa_key_id_t)0x7fffffff) - - -#if !defined(MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER) - -#define MBEDTLS_SVC_KEY_ID_INIT ( (psa_key_id_t)0 ) -#define MBEDTLS_SVC_KEY_ID_GET_KEY_ID( id ) ( id ) -#define MBEDTLS_SVC_KEY_ID_GET_OWNER_ID( id ) ( 0 ) - -/** Utility to initialize a key identifier at runtime. - * - * \param unused Unused parameter. - * \param key_id Identifier of the key. - */ -static inline mbedtls_svc_key_id_t mbedtls_svc_key_id_make( - unsigned int unused, psa_key_id_t key_id ) -{ - (void)unused; - - return( key_id ); -} - -/** Compare two key identifiers. - * - * \param id1 First key identifier. - * \param id2 Second key identifier. - * - * \return Non-zero if the two key identifier are equal, zero otherwise. - */ -static inline int mbedtls_svc_key_id_equal( mbedtls_svc_key_id_t id1, - mbedtls_svc_key_id_t id2 ) -{ - return( id1 == id2 ); -} - -/** Check whether a key identifier is null. - * - * \param key Key identifier. - * - * \return Non-zero if the key identifier is null, zero otherwise. - */ -static inline int mbedtls_svc_key_id_is_null( mbedtls_svc_key_id_t key ) -{ - return( key == 0 ); -} - -#else /* MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER */ - -#define MBEDTLS_SVC_KEY_ID_INIT ( (mbedtls_svc_key_id_t){ 0, 0 } ) -#define MBEDTLS_SVC_KEY_ID_GET_KEY_ID( id ) ( ( id ).key_id ) -#define MBEDTLS_SVC_KEY_ID_GET_OWNER_ID( id ) ( ( id ).owner ) - -/** Utility to initialize a key identifier at runtime. - * - * \param owner_id Identifier of the key owner. - * \param key_id Identifier of the key. - */ -static inline mbedtls_svc_key_id_t mbedtls_svc_key_id_make( - mbedtls_key_owner_id_t owner_id, psa_key_id_t key_id ) -{ - return( (mbedtls_svc_key_id_t){ .key_id = key_id, - .owner = owner_id } ); -} - -/** Compare two key identifiers. - * - * \param id1 First key identifier. - * \param id2 Second key identifier. - * - * \return Non-zero if the two key identifier are equal, zero otherwise. - */ -static inline int mbedtls_svc_key_id_equal( mbedtls_svc_key_id_t id1, - mbedtls_svc_key_id_t id2 ) -{ - return( ( id1.key_id == id2.key_id ) && - mbedtls_key_owner_id_equal( id1.owner, id2.owner ) ); -} - -/** Check whether a key identifier is null. - * - * \param key Key identifier. - * - * \return Non-zero if the key identifier is null, zero otherwise. - */ -static inline int mbedtls_svc_key_id_is_null( mbedtls_svc_key_id_t key ) -{ - return( key.key_id == 0 ); -} - -#endif /* !MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER */ - -/**@}*/ - -/** \defgroup policy Key policies - * @{ - */ - -/** Whether the key may be exported. - * - * A public key or the public part of a key pair may always be exported - * regardless of the value of this permission flag. - * - * If a key does not have export permission, implementations shall not - * allow the key to be exported in plain form from the cryptoprocessor, - * whether through psa_export_key() or through a proprietary interface. - * The key may however be exportable in a wrapped form, i.e. in a form - * where it is encrypted by another key. - */ -#define PSA_KEY_USAGE_EXPORT ((psa_key_usage_t)0x00000001) - -/** Whether the key may be copied. - * - * This flag allows the use of psa_copy_key() to make a copy of the key - * with the same policy or a more restrictive policy. - * - * For lifetimes for which the key is located in a secure element which - * enforce the non-exportability of keys, copying a key outside the secure - * element also requires the usage flag #PSA_KEY_USAGE_EXPORT. - * Copying the key inside the secure element is permitted with just - * #PSA_KEY_USAGE_COPY if the secure element supports it. - * For keys with the lifetime #PSA_KEY_LIFETIME_VOLATILE or - * #PSA_KEY_LIFETIME_PERSISTENT, the usage flag #PSA_KEY_USAGE_COPY - * is sufficient to permit the copy. - */ -#define PSA_KEY_USAGE_COPY ((psa_key_usage_t)0x00000002) - -/** Whether the key may be used to encrypt a message. - * - * This flag allows the key to be used for a symmetric encryption operation, - * for an AEAD encryption-and-authentication operation, - * or for an asymmetric encryption operation, - * if otherwise permitted by the key's type and policy. - * - * For a key pair, this concerns the public key. - */ -#define PSA_KEY_USAGE_ENCRYPT ((psa_key_usage_t)0x00000100) - -/** Whether the key may be used to decrypt a message. - * - * This flag allows the key to be used for a symmetric decryption operation, - * for an AEAD decryption-and-verification operation, - * or for an asymmetric decryption operation, - * if otherwise permitted by the key's type and policy. - * - * For a key pair, this concerns the private key. - */ -#define PSA_KEY_USAGE_DECRYPT ((psa_key_usage_t)0x00000200) - -/** Whether the key may be used to sign a message. - * - * This flag allows the key to be used for a MAC calculation operation or for - * an asymmetric message signature operation, if otherwise permitted by the - * key’s type and policy. - * - * For a key pair, this concerns the private key. - */ -#define PSA_KEY_USAGE_SIGN_MESSAGE ((psa_key_usage_t)0x00000400) - -/** Whether the key may be used to verify a message. - * - * This flag allows the key to be used for a MAC verification operation or for - * an asymmetric message signature verification operation, if otherwise - * permitted by the key’s type and policy. - * - * For a key pair, this concerns the public key. - */ -#define PSA_KEY_USAGE_VERIFY_MESSAGE ((psa_key_usage_t)0x00000800) - -/** Whether the key may be used to sign a message. - * - * This flag allows the key to be used for a MAC calculation operation - * or for an asymmetric signature operation, - * if otherwise permitted by the key's type and policy. - * - * For a key pair, this concerns the private key. - */ -#define PSA_KEY_USAGE_SIGN_HASH ((psa_key_usage_t)0x00001000) - -/** Whether the key may be used to verify a message signature. - * - * This flag allows the key to be used for a MAC verification operation - * or for an asymmetric signature verification operation, - * if otherwise permitted by by the key's type and policy. - * - * For a key pair, this concerns the public key. - */ -#define PSA_KEY_USAGE_VERIFY_HASH ((psa_key_usage_t)0x00002000) - -/** Whether the key may be used to derive other keys. - */ -#define PSA_KEY_USAGE_DERIVE ((psa_key_usage_t)0x00004000) - -/**@}*/ - -/** \defgroup derivation Key derivation - * @{ - */ - -/** A secret input for key derivation. - * - * This should be a key of type #PSA_KEY_TYPE_DERIVE - * (passed to psa_key_derivation_input_key()) - * or the shared secret resulting from a key agreement - * (obtained via psa_key_derivation_key_agreement()). - * - * The secret can also be a direct input (passed to - * key_derivation_input_bytes()). In this case, the derivation operation - * may not be used to derive keys: the operation will only allow - * psa_key_derivation_output_bytes(), not psa_key_derivation_output_key(). - */ -#define PSA_KEY_DERIVATION_INPUT_SECRET ((psa_key_derivation_step_t)0x0101) - -/** A label for key derivation. - * - * This should be a direct input. - * It can also be a key of type #PSA_KEY_TYPE_RAW_DATA. - */ -#define PSA_KEY_DERIVATION_INPUT_LABEL ((psa_key_derivation_step_t)0x0201) - -/** A salt for key derivation. - * - * This should be a direct input. - * It can also be a key of type #PSA_KEY_TYPE_RAW_DATA. - */ -#define PSA_KEY_DERIVATION_INPUT_SALT ((psa_key_derivation_step_t)0x0202) - -/** An information string for key derivation. - * - * This should be a direct input. - * It can also be a key of type #PSA_KEY_TYPE_RAW_DATA. - */ -#define PSA_KEY_DERIVATION_INPUT_INFO ((psa_key_derivation_step_t)0x0203) - -/** A seed for key derivation. - * - * This should be a direct input. - * It can also be a key of type #PSA_KEY_TYPE_RAW_DATA. - */ -#define PSA_KEY_DERIVATION_INPUT_SEED ((psa_key_derivation_step_t)0x0204) - -/**@}*/ - -/** \defgroup helper_macros Helper macros - * @{ - */ - -/* Helper macros */ - -/** Check if two AEAD algorithm identifiers refer to the same AEAD algorithm - * regardless of the tag length they encode. - * - * \param aead_alg_1 An AEAD algorithm identifier. - * \param aead_alg_2 An AEAD algorithm identifier. - * - * \return 1 if both identifiers refer to the same AEAD algorithm, - * 0 otherwise. - * Unspecified if neither \p aead_alg_1 nor \p aead_alg_2 are - * a supported AEAD algorithm. - */ -#define MBEDTLS_PSA_ALG_AEAD_EQUAL(aead_alg_1, aead_alg_2) \ - (!(((aead_alg_1) ^ (aead_alg_2)) & \ - ~(PSA_ALG_AEAD_TAG_LENGTH_MASK | PSA_ALG_AEAD_AT_LEAST_THIS_LENGTH_FLAG))) - -/**@}*/ - -#endif /* PSA_CRYPTO_VALUES_H */ |