diff options
Diffstat (limited to 'lib/mbedtls-2.27.0/include/psa/crypto.h')
| -rw-r--r-- | lib/mbedtls-2.27.0/include/psa/crypto.h | 3951 |
1 files changed, 3951 insertions, 0 deletions
diff --git a/lib/mbedtls-2.27.0/include/psa/crypto.h b/lib/mbedtls-2.27.0/include/psa/crypto.h new file mode 100644 index 0000000..17bebf3 --- /dev/null +++ b/lib/mbedtls-2.27.0/include/psa/crypto.h @@ -0,0 +1,3951 @@ +/** + * \file psa/crypto.h + * \brief Platform Security Architecture cryptography module + */ +/* + * Copyright The Mbed TLS Contributors + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#ifndef PSA_CRYPTO_H +#define PSA_CRYPTO_H + +#include "crypto_platform.h" + +#include <stddef.h> + +#ifdef __DOXYGEN_ONLY__ +/* This __DOXYGEN_ONLY__ block contains mock definitions for things that + * must be defined in the crypto_platform.h header. These mock definitions + * are present in this file as a convenience to generate pretty-printed + * documentation that includes those definitions. */ + +/** \defgroup platform Implementation-specific definitions + * @{ + */ + +/**@}*/ +#endif /* __DOXYGEN_ONLY__ */ + +#ifdef __cplusplus +extern "C" { +#endif + +/* The file "crypto_types.h" declares types that encode errors, + * algorithms, key types, policies, etc. */ +#include "crypto_types.h" + +/** \defgroup version API version + * @{ + */ + +/** + * The major version of this implementation of the PSA Crypto API + */ +#define PSA_CRYPTO_API_VERSION_MAJOR 1 + +/** + * The minor version of this implementation of the PSA Crypto API + */ +#define PSA_CRYPTO_API_VERSION_MINOR 0 + +/**@}*/ + +/* The file "crypto_values.h" declares macros to build and analyze values + * of integral types defined in "crypto_types.h". */ +#include "crypto_values.h" + +/** \defgroup initialization Library initialization + * @{ + */ + +/** + * \brief Library initialization. + * + * Applications must call this function before calling any other + * function in this module. + * + * Applications may call this function more than once. Once a call + * succeeds, subsequent calls are guaranteed to succeed. + * + * If the application calls other functions before calling psa_crypto_init(), + * the behavior is undefined. Implementations are encouraged to either perform + * the operation as if the library had been initialized or to return + * #PSA_ERROR_BAD_STATE or some other applicable error. In particular, + * implementations should not return a success status if the lack of + * initialization may have security implications, for example due to improper + * seeding of the random number generator. + * + * \retval #PSA_SUCCESS + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY + * \retval #PSA_ERROR_INSUFFICIENT_STORAGE + * \retval #PSA_ERROR_COMMUNICATION_FAILURE + * \retval #PSA_ERROR_HARDWARE_FAILURE + * \retval #PSA_ERROR_CORRUPTION_DETECTED + * \retval #PSA_ERROR_INSUFFICIENT_ENTROPY + * \retval #PSA_ERROR_STORAGE_FAILURE + * \retval #PSA_ERROR_DATA_INVALID + * \retval #PSA_ERROR_DATA_CORRUPT + */ +psa_status_t psa_crypto_init(void); + +/**@}*/ + +/** \addtogroup attributes + * @{ + */ + +/** \def PSA_KEY_ATTRIBUTES_INIT + * + * This macro returns a suitable initializer for a key attribute structure + * of type #psa_key_attributes_t. + */ +#ifdef __DOXYGEN_ONLY__ +/* This is an example definition for documentation purposes. + * Implementations should define a suitable value in `crypto_struct.h`. + */ +#define PSA_KEY_ATTRIBUTES_INIT {0} +#endif + +/** Return an initial value for a key attributes structure. + */ +static psa_key_attributes_t psa_key_attributes_init(void); + +/** Declare a key as persistent and set its key identifier. + * + * If the attribute structure currently declares the key as volatile (which + * is the default content of an attribute structure), this function sets + * the lifetime attribute to #PSA_KEY_LIFETIME_PERSISTENT. + * + * This function does not access storage, it merely stores the given + * value in the structure. + * The persistent key will be written to storage when the attribute + * structure is passed to a key creation function such as + * psa_import_key(), psa_generate_key(), + * psa_key_derivation_output_key() or psa_copy_key(). + * + * This function may be declared as `static` (i.e. without external + * linkage). This function may be provided as a function-like macro, + * but in this case it must evaluate each of its arguments exactly once. + * + * \param[out] attributes The attribute structure to write to. + * \param key The persistent identifier for the key. + */ +static void psa_set_key_id( psa_key_attributes_t *attributes, + mbedtls_svc_key_id_t key ); + +#ifdef MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER +/** Set the owner identifier of a key. + * + * When key identifiers encode key owner identifiers, psa_set_key_id() does + * not allow to define in key attributes the owner of volatile keys as + * psa_set_key_id() enforces the key to be persistent. + * + * This function allows to set in key attributes the owner identifier of a + * key. It is intended to be used for volatile keys. For persistent keys, + * it is recommended to use the PSA Cryptography API psa_set_key_id() to define + * the owner of a key. + * + * \param[out] attributes The attribute structure to write to. + * \param owner_id The key owner identifier. + */ +static void mbedtls_set_key_owner_id( psa_key_attributes_t *attributes, + mbedtls_key_owner_id_t owner_id ); +#endif + +/** Set the location of a persistent key. + * + * To make a key persistent, you must give it a persistent key identifier + * with psa_set_key_id(). By default, a key that has a persistent identifier + * is stored in the default storage area identifier by + * #PSA_KEY_LIFETIME_PERSISTENT. Call this function to choose a storage + * area, or to explicitly declare the key as volatile. + * + * This function does not access storage, it merely stores the given + * value in the structure. + * The persistent key will be written to storage when the attribute + * structure is passed to a key creation function such as + * psa_import_key(), psa_generate_key(), + * psa_key_derivation_output_key() or psa_copy_key(). + * + * This function may be declared as `static` (i.e. without external + * linkage). This function may be provided as a function-like macro, + * but in this case it must evaluate each of its arguments exactly once. + * + * \param[out] attributes The attribute structure to write to. + * \param lifetime The lifetime for the key. + * If this is #PSA_KEY_LIFETIME_VOLATILE, the + * key will be volatile, and the key identifier + * attribute is reset to 0. + */ +static void psa_set_key_lifetime(psa_key_attributes_t *attributes, + psa_key_lifetime_t lifetime); + +/** Retrieve the key identifier from key attributes. + * + * This function may be declared as `static` (i.e. without external + * linkage). This function may be provided as a function-like macro, + * but in this case it must evaluate its argument exactly once. + * + * \param[in] attributes The key attribute structure to query. + * + * \return The persistent identifier stored in the attribute structure. + * This value is unspecified if the attribute structure declares + * the key as volatile. + */ +static mbedtls_svc_key_id_t psa_get_key_id( + const psa_key_attributes_t *attributes); + +/** Retrieve the lifetime from key attributes. + * + * This function may be declared as `static` (i.e. without external + * linkage). This function may be provided as a function-like macro, + * but in this case it must evaluate its argument exactly once. + * + * \param[in] attributes The key attribute structure to query. + * + * \return The lifetime value stored in the attribute structure. + */ +static psa_key_lifetime_t psa_get_key_lifetime( + const psa_key_attributes_t *attributes); + +/** Declare usage flags for a key. + * + * Usage flags are part of a key's usage policy. They encode what + * kind of operations are permitted on the key. For more details, + * refer to the documentation of the type #psa_key_usage_t. + * + * This function overwrites any usage flags + * previously set in \p attributes. + * + * This function may be declared as `static` (i.e. without external + * linkage). This function may be provided as a function-like macro, + * but in this case it must evaluate each of its arguments exactly once. + * + * \param[out] attributes The attribute structure to write to. + * \param usage_flags The usage flags to write. + */ +static void psa_set_key_usage_flags(psa_key_attributes_t *attributes, + psa_key_usage_t usage_flags); + +/** Retrieve the usage flags from key attributes. + * + * This function may be declared as `static` (i.e. without external + * linkage). This function may be provided as a function-like macro, + * but in this case it must evaluate its argument exactly once. + * + * \param[in] attributes The key attribute structure to query. + * + * \return The usage flags stored in the attribute structure. + */ +static psa_key_usage_t psa_get_key_usage_flags( + const psa_key_attributes_t *attributes); + +/** Declare the permitted algorithm policy for a key. + * + * The permitted algorithm policy of a key encodes which algorithm or + * algorithms are permitted to be used with this key. The following + * algorithm policies are supported: + * - 0 does not allow any cryptographic operation with the key. The key + * may be used for non-cryptographic actions such as exporting (if + * permitted by the usage flags). + * - An algorithm value permits this particular algorithm. + * - An algorithm wildcard built from #PSA_ALG_ANY_HASH allows the specified + * signature scheme with any hash algorithm. + * - An algorithm built from #PSA_ALG_AT_LEAST_THIS_LENGTH_MAC allows + * any MAC algorithm from the same base class (e.g. CMAC) which + * generates/verifies a MAC length greater than or equal to the length + * encoded in the wildcard algorithm. + * - An algorithm built from #PSA_ALG_AEAD_WITH_AT_LEAST_THIS_LENGTH_TAG + * allows any AEAD algorithm from the same base class (e.g. CCM) which + * generates/verifies a tag length greater than or equal to the length + * encoded in the wildcard algorithm. + * + * This function overwrites any algorithm policy + * previously set in \p attributes. + * + * This function may be declared as `static` (i.e. without external + * linkage). This function may be provided as a function-like macro, + * but in this case it must evaluate each of its arguments exactly once. + * + * \param[out] attributes The attribute structure to write to. + * \param alg The permitted algorithm policy to write. + */ +static void psa_set_key_algorithm(psa_key_attributes_t *attributes, + psa_algorithm_t alg); + + +/** Retrieve the algorithm policy from key attributes. + * + * This function may be declared as `static` (i.e. without external + * linkage). This function may be provided as a function-like macro, + * but in this case it must evaluate its argument exactly once. + * + * \param[in] attributes The key attribute structure to query. + * + * \return The algorithm stored in the attribute structure. + */ +static psa_algorithm_t psa_get_key_algorithm( + const psa_key_attributes_t *attributes); + +/** Declare the type of a key. + * + * This function overwrites any key type + * previously set in \p attributes. + * + * This function may be declared as `static` (i.e. without external + * linkage). This function may be provided as a function-like macro, + * but in this case it must evaluate each of its arguments exactly once. + * + * \param[out] attributes The attribute structure to write to. + * \param type The key type to write. + * If this is 0, the key type in \p attributes + * becomes unspecified. + */ +static void psa_set_key_type(psa_key_attributes_t *attributes, + psa_key_type_t type); + + +/** Declare the size of a key. + * + * This function overwrites any key size previously set in \p attributes. + * + * This function may be declared as `static` (i.e. without external + * linkage). This function may be provided as a function-like macro, + * but in this case it must evaluate each of its arguments exactly once. + * + * \param[out] attributes The attribute structure to write to. + * \param bits The key size in bits. + * If this is 0, the key size in \p attributes + * becomes unspecified. Keys of size 0 are + * not supported. + */ +static void psa_set_key_bits(psa_key_attributes_t *attributes, + size_t bits); + +/** Retrieve the key type from key attributes. + * + * This function may be declared as `static` (i.e. without external + * linkage). This function may be provided as a function-like macro, + * but in this case it must evaluate its argument exactly once. + * + * \param[in] attributes The key attribute structure to query. + * + * \return The key type stored in the attribute structure. + */ +static psa_key_type_t psa_get_key_type(const psa_key_attributes_t *attributes); + +/** Retrieve the key size from key attributes. + * + * This function may be declared as `static` (i.e. without external + * linkage). This function may be provided as a function-like macro, + * but in this case it must evaluate its argument exactly once. + * + * \param[in] attributes The key attribute structure to query. + * + * \return The key size stored in the attribute structure, in bits. + */ +static size_t psa_get_key_bits(const psa_key_attributes_t *attributes); + +/** Retrieve the attributes of a key. + * + * This function first resets the attribute structure as with + * psa_reset_key_attributes(). It then copies the attributes of + * the given key into the given attribute structure. + * + * \note This function may allocate memory or other resources. + * Once you have called this function on an attribute structure, + * you must call psa_reset_key_attributes() to free these resources. + * + * \param[in] key Identifier of the key to query. + * \param[in,out] attributes On success, the attributes of the key. + * On failure, equivalent to a + * freshly-initialized structure. + * + * \retval #PSA_SUCCESS + * \retval #PSA_ERROR_INVALID_HANDLE + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY + * \retval #PSA_ERROR_COMMUNICATION_FAILURE + * \retval #PSA_ERROR_CORRUPTION_DETECTED + * \retval #PSA_ERROR_STORAGE_FAILURE + * \retval #PSA_ERROR_DATA_CORRUPT + * \retval #PSA_ERROR_DATA_INVALID + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_get_key_attributes(mbedtls_svc_key_id_t key, + psa_key_attributes_t *attributes); + +/** Reset a key attribute structure to a freshly initialized state. + * + * You must initialize the attribute structure as described in the + * documentation of the type #psa_key_attributes_t before calling this + * function. Once the structure has been initialized, you may call this + * function at any time. + * + * This function frees any auxiliary resources that the structure + * may contain. + * + * \param[in,out] attributes The attribute structure to reset. + */ +void psa_reset_key_attributes(psa_key_attributes_t *attributes); + +/**@}*/ + +/** \defgroup key_management Key management + * @{ + */ + +/** Remove non-essential copies of key material from memory. + * + * If the key identifier designates a volatile key, this functions does not do + * anything and returns successfully. + * + * If the key identifier designates a persistent key, then this function will + * free all resources associated with the key in volatile memory. The key + * data in persistent storage is not affected and the key can still be used. + * + * \param key Identifier of the key to purge. + * + * \retval #PSA_SUCCESS + * The key material will have been removed from memory if it is not + * currently required. + * \retval #PSA_ERROR_INVALID_ARGUMENT + * \p key is not a valid key identifier. + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_purge_key(mbedtls_svc_key_id_t key); + +/** Make a copy of a key. + * + * Copy key material from one location to another. + * + * This function is primarily useful to copy a key from one location + * to another, since it populates a key using the material from + * another key which may have a different lifetime. + * + * This function may be used to share a key with a different party, + * subject to implementation-defined restrictions on key sharing. + * + * The policy on the source key must have the usage flag + * #PSA_KEY_USAGE_COPY set. + * This flag is sufficient to permit the copy if the key has the lifetime + * #PSA_KEY_LIFETIME_VOLATILE or #PSA_KEY_LIFETIME_PERSISTENT. + * Some secure elements do not provide a way to copy a key without + * making it extractable from the secure element. If a key is located + * in such a secure element, then the key must have both usage flags + * #PSA_KEY_USAGE_COPY and #PSA_KEY_USAGE_EXPORT in order to make + * a copy of the key outside the secure element. + * + * The resulting key may only be used in a way that conforms to + * both the policy of the original key and the policy specified in + * the \p attributes parameter: + * - The usage flags on the resulting key are the bitwise-and of the + * usage flags on the source policy and the usage flags in \p attributes. + * - If both allow the same algorithm or wildcard-based + * algorithm policy, the resulting key has the same algorithm policy. + * - If either of the policies allows an algorithm and the other policy + * allows a wildcard-based algorithm policy that includes this algorithm, + * the resulting key allows the same algorithm. + * - If the policies do not allow any algorithm in common, this function + * fails with the status #PSA_ERROR_INVALID_ARGUMENT. + * + * The effect of this function on implementation-defined attributes is + * implementation-defined. + * + * \param source_key The key to copy. It must allow the usage + * #PSA_KEY_USAGE_COPY. If a private or secret key is + * being copied outside of a secure element it must + * also allow #PSA_KEY_USAGE_EXPORT. + * \param[in] attributes The attributes for the new key. + * They are used as follows: + * - The key type and size may be 0. If either is + * nonzero, it must match the corresponding + * attribute of the source key. + * - The key location (the lifetime and, for + * persistent keys, the key identifier) is + * used directly. + * - The policy constraints (usage flags and + * algorithm policy) are combined from + * the source key and \p attributes so that + * both sets of restrictions apply, as + * described in the documentation of this function. + * \param[out] target_key On success, an identifier for the newly created + * key. For persistent keys, this is the key + * identifier defined in \p attributes. + * \c 0 on failure. + * + * \retval #PSA_SUCCESS + * \retval #PSA_ERROR_INVALID_HANDLE + * \p source_key is invalid. + * \retval #PSA_ERROR_ALREADY_EXISTS + * This is an attempt to create a persistent key, and there is + * already a persistent key with the given identifier. + * \retval #PSA_ERROR_INVALID_ARGUMENT + * The lifetime or identifier in \p attributes are invalid. + * \retval #PSA_ERROR_INVALID_ARGUMENT + * The policy constraints on the source and specified in + * \p attributes are incompatible. + * \retval #PSA_ERROR_INVALID_ARGUMENT + * \p attributes specifies a key type or key size + * which does not match the attributes of the source key. + * \retval #PSA_ERROR_NOT_PERMITTED + * The source key does not have the #PSA_KEY_USAGE_COPY usage flag. + * \retval #PSA_ERROR_NOT_PERMITTED + * The source key is not exportable and its lifetime does not + * allow copying it to the target's lifetime. + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY + * \retval #PSA_ERROR_INSUFFICIENT_STORAGE + * \retval #PSA_ERROR_COMMUNICATION_FAILURE + * \retval #PSA_ERROR_HARDWARE_FAILURE + * \retval #PSA_ERROR_DATA_INVALID + * \retval #PSA_ERROR_DATA_CORRUPT + * \retval #PSA_ERROR_STORAGE_FAILURE + * \retval #PSA_ERROR_CORRUPTION_DETECTED + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_copy_key(mbedtls_svc_key_id_t source_key, + const psa_key_attributes_t *attributes, + mbedtls_svc_key_id_t *target_key); + + +/** + * \brief Destroy a key. + * + * This function destroys a key from both volatile + * memory and, if applicable, non-volatile storage. Implementations shall + * make a best effort to ensure that that the key material cannot be recovered. + * + * This function also erases any metadata such as policies and frees + * resources associated with the key. + * + * If a key is currently in use in a multipart operation, then destroying the + * key will cause the multipart operation to fail. + * + * \param key Identifier of the key to erase. If this is \c 0, do nothing and + * return #PSA_SUCCESS. + * + * \retval #PSA_SUCCESS + * \p key was a valid identifier and the key material that it + * referred to has been erased. Alternatively, \p key is \c 0. + * \retval #PSA_ERROR_NOT_PERMITTED + * The key cannot be erased because it is + * read-only, either due to a policy or due to physical restrictions. + * \retval #PSA_ERROR_INVALID_HANDLE + * \p key is not a valid identifier nor \c 0. + * \retval #PSA_ERROR_COMMUNICATION_FAILURE + * There was an failure in communication with the cryptoprocessor. + * The key material may still be present in the cryptoprocessor. + * \retval #PSA_ERROR_DATA_INVALID + * This error is typically a result of either storage corruption on a + * cleartext storage backend, or an attempt to read data that was + * written by an incompatible version of the library. + * \retval #PSA_ERROR_STORAGE_FAILURE + * The storage is corrupted. Implementations shall make a best effort + * to erase key material even in this stage, however applications + * should be aware that it may be impossible to guarantee that the + * key material is not recoverable in such cases. + * \retval #PSA_ERROR_CORRUPTION_DETECTED + * An unexpected condition which is not a storage corruption or + * a communication failure occurred. The cryptoprocessor may have + * been compromised. + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_destroy_key(mbedtls_svc_key_id_t key); + +/**@}*/ + +/** \defgroup import_export Key import and export + * @{ + */ + +/** + * \brief Import a key in binary format. + * + * This function supports any output from psa_export_key(). Refer to the + * documentation of psa_export_public_key() for the format of public keys + * and to the documentation of psa_export_key() for the format for + * other key types. + * + * The key data determines the key size. The attributes may optionally + * specify a key size; in this case it must match the size determined + * from the key data. A key size of 0 in \p attributes indicates that + * the key size is solely determined by the key data. + * + * Implementations must reject an attempt to import a key of size 0. + * + * This specification supports a single format for each key type. + * Implementations may support other formats as long as the standard + * format is supported. Implementations that support other formats + * should ensure that the formats are clearly unambiguous so as to + * minimize the risk that an invalid input is accidentally interpreted + * according to a different format. + * + * \param[in] attributes The attributes for the new key. + * The key size is always determined from the + * \p data buffer. + * If the key size in \p attributes is nonzero, + * it must be equal to the size from \p data. + * \param[out] key On success, an identifier to the newly created key. + * For persistent keys, this is the key identifier + * defined in \p attributes. + * \c 0 on failure. + * \param[in] data Buffer containing the key data. The content of this + * buffer is interpreted according to the type declared + * in \p attributes. + * All implementations must support at least the format + * described in the documentation + * of psa_export_key() or psa_export_public_key() for + * the chosen type. Implementations may allow other + * formats, but should be conservative: implementations + * should err on the side of rejecting content if it + * may be erroneous (e.g. wrong type or truncated data). + * \param data_length Size of the \p data buffer in bytes. + * + * \retval #PSA_SUCCESS + * Success. + * If the key is persistent, the key material and the key's metadata + * have been saved to persistent storage. + * \retval #PSA_ERROR_ALREADY_EXISTS + * This is an attempt to create a persistent key, and there is + * already a persistent key with the given identifier. + * \retval #PSA_ERROR_NOT_SUPPORTED + * The key type or key size is not supported, either by the + * implementation in general or in this particular persistent location. + * \retval #PSA_ERROR_INVALID_ARGUMENT + * The key attributes, as a whole, are invalid. + * \retval #PSA_ERROR_INVALID_ARGUMENT + * The key data is not correctly formatted. + * \retval #PSA_ERROR_INVALID_ARGUMENT + * The size in \p attributes is nonzero and does not match the size + * of the key data. + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY + * \retval #PSA_ERROR_INSUFFICIENT_STORAGE + * \retval #PSA_ERROR_COMMUNICATION_FAILURE + * \retval #PSA_ERROR_DATA_CORRUPT + * \retval #PSA_ERROR_DATA_INVALID + * \retval #PSA_ERROR_STORAGE_FAILURE + * \retval #PSA_ERROR_HARDWARE_FAILURE + * \retval #PSA_ERROR_CORRUPTION_DETECTED + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_import_key(const psa_key_attributes_t *attributes, + const uint8_t *data, + size_t data_length, + mbedtls_svc_key_id_t *key); + + + +/** + * \brief Export a key in binary format. + * + * The output of this function can be passed to psa_import_key() to + * create an equivalent object. + * + * If the implementation of psa_import_key() supports other formats + * beyond the format specified here, the output from psa_export_key() + * must use the representation specified here, not the original + * representation. + * + * For standard key types, the output format is as follows: + * + * - For symmetric keys (including MAC keys), the format is the + * raw bytes of the key. + * - For DES, the key data consists of 8 bytes. The parity bits must be + * correct. + * - For Triple-DES, the format is the concatenation of the + * two or three DES keys. + * - For RSA key pairs (#PSA_KEY_TYPE_RSA_KEY_PAIR), the format + * is the non-encrypted DER encoding of the representation defined by + * PKCS\#1 (RFC 8017) as `RSAPrivateKey`, version 0. + * ``` + * RSAPrivateKey ::= SEQUENCE { + * version INTEGER, -- must be 0 + * modulus INTEGER, -- n + * publicExponent INTEGER, -- e + * privateExponent INTEGER, -- d + * prime1 INTEGER, -- p + * prime2 INTEGER, -- q + * exponent1 INTEGER, -- d mod (p-1) + * exponent2 INTEGER, -- d mod (q-1) + * coefficient INTEGER, -- (inverse of q) mod p + * } + * ``` + * - For elliptic curve key pairs (key types for which + * #PSA_KEY_TYPE_IS_ECC_KEY_PAIR is true), the format is + * a representation of the private value as a `ceiling(m/8)`-byte string + * where `m` is the bit size associated with the curve, i.e. the bit size + * of the order of the curve's coordinate field. This byte string is + * in little-endian order for Montgomery curves (curve types + * `PSA_ECC_FAMILY_CURVEXXX`), and in big-endian order for Weierstrass + * curves (curve types `PSA_ECC_FAMILY_SECTXXX`, `PSA_ECC_FAMILY_SECPXXX` + * and `PSA_ECC_FAMILY_BRAINPOOL_PXXX`). + * For Weierstrass curves, this is the content of the `privateKey` field of + * the `ECPrivateKey` format defined by RFC 5915. For Montgomery curves, + * the format is defined by RFC 7748, and output is masked according to ยง5. + * For twisted Edwards curves, the private key is as defined by RFC 8032 + * (a 32-byte string for Edwards25519, a 57-byte string for Edwards448). + * - For Diffie-Hellman key exchange key pairs (key types for which + * #PSA_KEY_TYPE_IS_DH_KEY_PAIR is true), the + * format is the representation of the private key `x` as a big-endian byte + * string. The length of the byte string is the private key size in bytes + * (leading zeroes are not stripped). + * - For public keys (key types for which #PSA_KEY_TYPE_IS_PUBLIC_KEY is + * true), the format is the same as for psa_export_public_key(). + * + * The policy on the key must have the usage flag #PSA_KEY_USAGE_EXPORT set. + * + * \param key Identifier of the key to export. It must allow the + * usage #PSA_KEY_USAGE_EXPORT, unless it is a public + * key. + * \param[out] data Buffer where the key data is to be written. + * \param data_size Size of the \p data buffer in bytes. + * \param[out] data_length On success, the number of bytes + * that make up the key data. + * + * \retval #PSA_SUCCESS + * \retval #PSA_ERROR_INVALID_HANDLE + * \retval #PSA_ERROR_NOT_PERMITTED + * The key does not have the #PSA_KEY_USAGE_EXPORT flag. + * \retval #PSA_ERROR_NOT_SUPPORTED + * \retval #PSA_ERROR_BUFFER_TOO_SMALL + * The size of the \p data buffer is too small. You can determine a + * sufficient buffer size by calling + * #PSA_EXPORT_KEY_OUTPUT_SIZE(\c type, \c bits) + * where \c type is the key type + * and \c bits is the key size in bits. + * \retval #PSA_ERROR_COMMUNICATION_FAILURE + * \retval #PSA_ERROR_HARDWARE_FAILURE + * \retval #PSA_ERROR_CORRUPTION_DETECTED + * \retval #PSA_ERROR_STORAGE_FAILURE + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_export_key(mbedtls_svc_key_id_t key, + uint8_t *data, + size_t data_size, + size_t *data_length); + +/** + * \brief Export a public key or the public part of a key pair in binary format. + * + * The output of this function can be passed to psa_import_key() to + * create an object that is equivalent to the public key. + * + * This specification supports a single format for each key type. + * Implementations may support other formats as long as the standard + * format is supported. Implementations that support other formats + * should ensure that the formats are clearly unambiguous so as to + * minimize the risk that an invalid input is accidentally interpreted + * according to a different format. + * + * For standard key types, the output format is as follows: + * - For RSA public keys (#PSA_KEY_TYPE_RSA_PUBLIC_KEY), the DER encoding of + * the representation defined by RFC 3279 §2.3.1 as `RSAPublicKey`. + * ``` + * RSAPublicKey ::= SEQUENCE { + * modulus INTEGER, -- n + * publicExponent INTEGER } -- e + * ``` + * - For elliptic curve keys on a twisted Edwards curve (key types for which + * #PSA_KEY_TYPE_IS_ECC_PUBLIC_KEY is true and #PSA_KEY_TYPE_ECC_GET_FAMILY + * returns #PSA_ECC_FAMILY_TWISTED_EDWARDS), the public key is as defined + * by RFC 8032 + * (a 32-byte string for Edwards25519, a 57-byte string for Edwards448). + * - For other elliptic curve public keys (key types for which + * #PSA_KEY_TYPE_IS_ECC_PUBLIC_KEY is true), the format is the uncompressed + * representation defined by SEC1 §2.3.3 as the content of an ECPoint. + * Let `m` be the bit size associated with the curve, i.e. the bit size of + * `q` for a curve over `F_q`. The representation consists of: + * - The byte 0x04; + * - `x_P` as a `ceiling(m/8)`-byte string, big-endian; + * - `y_P` as a `ceiling(m/8)`-byte string, big-endian. + * - For Diffie-Hellman key exchange public keys (key types for which + * #PSA_KEY_TYPE_IS_DH_PUBLIC_KEY is true), + * the format is the representation of the public key `y = g^x mod p` as a + * big-endian byte string. The length of the byte string is the length of the + * base prime `p` in bytes. + * + * Exporting a public key object or the public part of a key pair is + * always permitted, regardless of the key's usage flags. + * + * \param key Identifier of the key to export. + * \param[out] data Buffer where the key data is to be written. + * \param data_size Size of the \p data buffer in bytes. + * \param[out] data_length On success, the number of bytes + * that make up the key data. + * + * \retval #PSA_SUCCESS + * \retval #PSA_ERROR_INVALID_HANDLE + * \retval #PSA_ERROR_INVALID_ARGUMENT + * The key is neither a public key nor a key pair. + * \retval #PSA_ERROR_NOT_SUPPORTED + * \retval #PSA_ERROR_BUFFER_TOO_SMALL + * The size of the \p data buffer is too small. You can determine a + * sufficient buffer size by calling + * #PSA_EXPORT_KEY_OUTPUT_SIZE(#PSA_KEY_TYPE_PUBLIC_KEY_OF_KEY_PAIR(\c type), \c bits) + * where \c type is the key type + * and \c bits is the key size in bits. + * \retval #PSA_ERROR_COMMUNICATION_FAILURE + * \retval #PSA_ERROR_HARDWARE_FAILURE + * \retval #PSA_ERROR_CORRUPTION_DETECTED + * \retval #PSA_ERROR_STORAGE_FAILURE + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_export_public_key(mbedtls_svc_key_id_t key, + uint8_t *data, + size_t data_size, + size_t *data_length); + + + +/**@}*/ + +/** \defgroup hash Message digests + * @{ + */ + +/** Calculate the hash (digest) of a message. + * + * \note To verify the hash of a message against an + * expected value, use psa_hash_compare() instead. + * + * \param alg The hash algorithm to compute (\c PSA_ALG_XXX value + * such that #PSA_ALG_IS_HASH(\p alg) is true). + * \param[in] input Buffer containing the message to hash. + * \param input_length Size of the \p input buffer in bytes. + * \param[out] hash Buffer where the hash is to be written. + * \param hash_size Size of the \p hash buffer in bytes. + * \param[out] hash_length On success, the number of bytes + * that make up the hash value. This is always + * #PSA_HASH_LENGTH(\p alg). + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_NOT_SUPPORTED + * \p alg is not supported or is not a hash algorithm. + * \retval #PSA_ERROR_INVALID_ARGUMENT + * \retval #PSA_ERROR_BUFFER_TOO_SMALL + * \p hash_size is too small + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY + * \retval #PSA_ERROR_COMMUNICATION_FAILURE + * \retval #PSA_ERROR_HARDWARE_FAILURE + * \retval #PSA_ERROR_CORRUPTION_DETECTED + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_hash_compute(psa_algorithm_t alg, + const uint8_t *input, + size_t input_length, + uint8_t *hash, + size_t hash_size, + size_t *hash_length); + +/** Calculate the hash (digest) of a message and compare it with a + * reference value. + * + * \param alg The hash algorithm to compute (\c PSA_ALG_XXX value + * such that #PSA_ALG_IS_HASH(\p alg) is true). + * \param[in] input Buffer containing the message to hash. + * \param input_length Size of the \p input buffer in bytes. + * \param[out] hash Buffer containing the expected hash value. + * \param hash_length Size of the \p hash buffer in bytes. + * + * \retval #PSA_SUCCESS + * The expected hash is identical to the actual hash of the input. + * \retval #PSA_ERROR_INVALID_SIGNATURE + * The hash of the message was calculated successfully, but it + * differs from the expected hash. + * \retval #PSA_ERROR_NOT_SUPPORTED + * \p alg is not supported or is not a hash algorithm. + * \retval #PSA_ERROR_INVALID_ARGUMENT + * \p input_length or \p hash_length do not match the hash size for \p alg + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY + * \retval #PSA_ERROR_COMMUNICATION_FAILURE + * \retval #PSA_ERROR_HARDWARE_FAILURE + * \retval #PSA_ERROR_CORRUPTION_DETECTED + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_hash_compare(psa_algorithm_t alg, + const uint8_t *input, + size_t input_length, + const uint8_t *hash, + size_t hash_length); + +/** The type of the state data structure for multipart hash operations. + * + * Before calling any function on a hash operation object, the application must + * initialize it by any of the following means: + * - Set the structure to all-bits-zero, for example: + * \code + * psa_hash_operation_t operation; + * memset(&operation, 0, sizeof(operation)); + * \endcode + * - Initialize the structure to logical zero values, for example: + * \code + * psa_hash_operation_t operation = {0}; + * \endcode + * - Initialize the structure to the initializer #PSA_HASH_OPERATION_INIT, + * for example: + * \code + * psa_hash_operation_t operation = PSA_HASH_OPERATION_INIT; + * \endcode + * - Assign the result of the function psa_hash_operation_init() + * to the structure, for example: + * \code + * psa_hash_operation_t operation; + * operation = psa_hash_operation_init(); + * \endcode + * + * This is an implementation-defined \c struct. Applications should not + * make any assumptions about the content of this structure except + * as directed by the documentation of a specific implementation. */ +typedef struct psa_hash_operation_s psa_hash_operation_t; + +/** \def PSA_HASH_OPERATION_INIT + * + * This macro returns a suitable initializer for a hash operation object + * of type #psa_hash_operation_t. + */ +#ifdef __DOXYGEN_ONLY__ +/* This is an example definition for documentation purposes. + * Implementations should define a suitable value in `crypto_struct.h`. + */ +#define PSA_HASH_OPERATION_INIT {0} +#endif + +/** Return an initial value for a hash operation object. + */ +static psa_hash_operation_t psa_hash_operation_init(void); + +/** Set up a multipart hash operation. + * + * The sequence of operations to calculate a hash (message digest) + * is as follows: + * -# Allocate an operation object which will be passed to all the functions + * listed here. + * -# Initialize the operation object with one of the methods described in the + * documentation for #psa_hash_operation_t, e.g. #PSA_HASH_OPERATION_INIT. + * -# Call psa_hash_setup() to specify the algorithm. + * -# Call psa_hash_update() zero, one or more times, passing a fragment + * of the message each time. The hash that is calculated is the hash + * of the concatenation of these messages in order. + * -# To calculate the hash, call psa_hash_finish(). + * To compare the hash with an expected value, call psa_hash_verify(). + * + * If an error occurs at any step after a call to psa_hash_setup(), the + * operation will need to be reset by a call to psa_hash_abort(). The + * application may call psa_hash_abort() at any time after the operation + * has been initialized. + * + * After a successful call to psa_hash_setup(), the application must + * eventually terminate the operation. The following events terminate an + * operation: + * - A successful call to psa_hash_finish() or psa_hash_verify(). + * - A call to psa_hash_abort(). + * + * \param[in,out] operation The operation object to set up. It must have + * been initialized as per the documentation for + * #psa_hash_operation_t and not yet in use. + * \param alg The hash algorithm to compute (\c PSA_ALG_XXX value + * such that #PSA_ALG_IS_HASH(\p alg) is true). + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_NOT_SUPPORTED + * \p alg is not a supported hash algorithm. + * \retval #PSA_ERROR_INVALID_ARGUMENT + * \p alg is not a hash algorithm. + * \retval #PSA_ERROR_BAD_STATE + * The operation state is not valid (it must be inactive). + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY + * \retval #PSA_ERROR_COMMUNICATION_FAILURE + * \retval #PSA_ERROR_HARDWARE_FAILURE + * \retval #PSA_ERROR_CORRUPTION_DETECTED + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_hash_setup(psa_hash_operation_t *operation, + psa_algorithm_t alg); + +/** Add a message fragment to a multipart hash operation. + * + * The application must call psa_hash_setup() before calling this function. + * + * If this function returns an error status, the operation enters an error + * state and must be aborted by calling psa_hash_abort(). + * + * \param[in,out] operation Active hash operation. + * \param[in] input Buffer containing the message fragment to hash. + * \param input_length Size of the \p input buffer in bytes. + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_BAD_STATE + * The operation state is not valid (it muct be active). + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY + * \retval #PSA_ERROR_COMMUNICATION_FAILURE + * \retval #PSA_ERROR_HARDWARE_FAILURE + * \retval #PSA_ERROR_CORRUPTION_DETECTED + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_hash_update(psa_hash_operation_t *operation, + const uint8_t *input, + size_t input_length); + +/** Finish the calculation of the hash of a message. + * + * The application must call psa_hash_setup() before calling this function. + * This function calculates the hash of the message formed by concatenating + * the inputs passed to preceding calls to psa_hash_update(). + * + * When this function returns successfuly, the operation becomes inactive. + * If this function returns an error status, the operation enters an error + * state and must be aborted by calling psa_hash_abort(). + * + * \warning Applications should not call this function if they expect + * a specific value for the hash. Call psa_hash_verify() instead. + * Beware that comparing integrity or authenticity data such as + * hash values with a function such as \c memcmp is risky + * because the time taken by the comparison may leak information + * about the hashed data which could allow an attacker to guess + * a valid hash and thereby bypass security controls. + * + * \param[in,out] operation Active hash operation. + * \param[out] hash Buffer where the hash is to be written. + * \param hash_size Size of the \p hash buffer in bytes. + * \param[out] hash_length On success, the number of bytes + * that make up the hash value. This is always + * #PSA_HASH_LENGTH(\c alg) where \c alg is the + * hash algorithm that is calculated. + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_BAD_STATE + * The operation state is not valid (it must be active). + * \retval #PSA_ERROR_BUFFER_TOO_SMALL + * The size of the \p hash buffer is too small. You can determine a + * sufficient buffer size by calling #PSA_HASH_LENGTH(\c alg) + * where \c alg is the hash algorithm that is calculated. + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY + * \retval #PSA_ERROR_COMMUNICATION_FAILURE + * \retval #PSA_ERROR_HARDWARE_FAILURE + * \retval #PSA_ERROR_CORRUPTION_DETECTED + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_hash_finish(psa_hash_operation_t *operation, + uint8_t *hash, + size_t hash_size, + size_t *hash_length); + +/** Finish the calculation of the hash of a message and compare it with + * an expected value. + * + * The application must call psa_hash_setup() before calling this function. + * This function calculates the hash of the message formed by concatenating + * the inputs passed to preceding calls to psa_hash_update(). It then + * compares the calculated hash with the expected hash passed as a + * parameter to this function. + * + * When this function returns successfuly, the operation becomes inactive. + * If this function returns an error status, the operation enters an error + * state and must be aborted by calling psa_hash_abort(). + * + * \note Implementations shall make the best effort to ensure that the + * comparison between the actual hash and the expected hash is performed + * in constant time. + * + * \param[in,out] operation Active hash operation. + * \param[in] hash Buffer containing the expected hash value. + * \param hash_length Size of the \p hash buffer in bytes. + * + * \retval #PSA_SUCCESS + * The expected hash is identical to the actual hash of the message. + * \retval #PSA_ERROR_INVALID_SIGNATURE + * The hash of the message was calculated successfully, but it + * differs from the expected hash. + * \retval #PSA_ERROR_BAD_STATE + * The operation state is not valid (it must be active). + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY + * \retval #PSA_ERROR_COMMUNICATION_FAILURE + * \retval #PSA_ERROR_HARDWARE_FAILURE + * \retval #PSA_ERROR_CORRUPTION_DETECTED + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_hash_verify(psa_hash_operation_t *operation, + const uint8_t *hash, + size_t hash_length); + +/** Abort a hash operation. + * + * Aborting an operation frees all associated resources except for the + * \p operation structure itself. Once aborted, the operation object + * can be reused for another operation by calling + * psa_hash_setup() again. + * + * You may call this function any time after the operation object has + * been initialized by one of the methods described in #psa_hash_operation_t. + * + * In particular, calling psa_hash_abort() after the operation has been + * terminated by a call to psa_hash_abort(), psa_hash_finish() or + * psa_hash_verify() is safe and has no effect. + * + * \param[in,out] operation Initialized hash operation. + * + * \retval #PSA_SUCCESS + * \retval #PSA_ERROR_COMMUNICATION_FAILURE + * \retval #PSA_ERROR_HARDWARE_FAILURE + * \retval #PSA_ERROR_CORRUPTION_DETECTED + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_hash_abort(psa_hash_operation_t *operation); + +/** Clone a hash operation. + * + * This function copies the state of an ongoing hash operation to + * a new operation object. In other words, this function is equivalent + * to calling psa_hash_setup() on \p target_operation with the same + * algorithm that \p source_operation was set up for, then + * psa_hash_update() on \p target_operation with the same input that + * that was passed to \p source_operation. After this function returns, the + * two objects are independent, i.e. subsequent calls involving one of + * the objects do not affect the other object. + * + * \param[in] source_operation The active hash operation to clone. + * \param[in,out] target_operation The operation object to set up. + * It must be initialized but not active. + * + * \retval #PSA_SUCCESS + * \retval #PSA_ERROR_BAD_STATE + * The \p source_operation state is not valid (it must be active). + * \retval #PSA_ERROR_BAD_STATE + * The \p target_operation state is not valid (it must be inactive). + * \retval #PSA_ERROR_COMMUNICATION_FAILURE + * \retval #PSA_ERROR_HARDWARE_FAILURE + * \retval #PSA_ERROR_CORRUPTION_DETECTED + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_hash_clone(const psa_hash_operation_t *source_operation, + psa_hash_operation_t *target_operation); + +/**@}*/ + +/** \defgroup MAC Message authentication codes + * @{ + */ + +/** Calculate the MAC (message authentication code) of a message. + * + * \note To verify the MAC of a message against an + * expected value, use psa_mac_verify() instead. + * Beware that comparing integrity or authenticity data such as + * MAC values with a function such as \c memcmp is risky + * because the time taken by the comparison may leak information + * about the MAC value which could allow an attacker to guess + * a valid MAC and thereby bypass security controls. + * + * \param key Identifier of the key to use for the operation. It + * must allow the usage PSA_KEY_USAGE_SIGN_MESSAGE. + * \param alg The MAC algorithm to compute (\c PSA_ALG_XXX value + * such that #PSA_ALG_IS_MAC(\p alg) is true). + * \param[in] input Buffer containing the input message. + * \param input_length Size of the \p input buffer in bytes. + * \param[out] mac Buffer where the MAC value is to be written. + * \param mac_size Size of the \p mac buffer in bytes. + * \param[out] mac_length On success, the number of bytes + * that make up the MAC value. + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_INVALID_HANDLE + * \retval #PSA_ERROR_NOT_PERMITTED + * \retval #PSA_ERROR_INVALID_ARGUMENT + * \p key is not compatible with \p alg. + * \retval #PSA_ERROR_NOT_SUPPORTED + * \p alg is not supported or is not a MAC algorithm. + * \retval #PSA_ERROR_BUFFER_TOO_SMALL + * \p mac_size is too small + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY + * \retval #PSA_ERROR_COMMUNICATION_FAILURE + * \retval #PSA_ERROR_HARDWARE_FAILURE + * \retval #PSA_ERROR_CORRUPTION_DETECTED + * \retval #PSA_ERROR_STORAGE_FAILURE + * The key could not be retrieved from storage. + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_mac_compute(mbedtls_svc_key_id_t key, + psa_algorithm_t alg, + const uint8_t *input, + size_t input_length, + uint8_t *mac, + size_t mac_size, + size_t *mac_length); + +/** Calculate the MAC of a message and compare it with a reference value. + * + * \param key Identifier of the key to use for the operation. It + * must allow the usage PSA_KEY_USAGE_VERIFY_MESSAGE. + * \param alg The MAC algorithm to compute (\c PSA_ALG_XXX value + * such that #PSA_ALG_IS_MAC(\p alg) is true). + * \param[in] input Buffer containing the input message. + * \param input_length Size of the \p input buffer in bytes. + * \param[out] mac Buffer containing the expected MAC value. + * \param mac_length Size of the \p mac buffer in bytes. + * + * \retval #PSA_SUCCESS + * The expected MAC is identical to the actual MAC of the input. + * \retval #PSA_ERROR_INVALID_SIGNATURE + * The MAC of the message was calculated successfully, but it + * differs from the expected value. + * \retval #PSA_ERROR_INVALID_HANDLE + * \retval #PSA_ERROR_NOT_PERMITTED + * \retval #PSA_ERROR_INVALID_ARGUMENT + * \p key is not compatible with \p alg. + * \retval #PSA_ERROR_NOT_SUPPORTED + * \p alg is not supported or is not a MAC algorithm. + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY + * \retval #PSA_ERROR_COMMUNICATION_FAILURE + * \retval #PSA_ERROR_HARDWARE_FAILURE + * \retval #PSA_ERROR_CORRUPTION_DETECTED + * \retval #PSA_ERROR_STORAGE_FAILURE + * The key could not be retrieved from storage. + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_mac_verify(mbedtls_svc_key_id_t key, + psa_algorithm_t alg, + const uint8_t *input, + size_t input_length, + const uint8_t *mac, + size_t mac_length); + +/** The type of the state data structure for multipart MAC operations. + * + * Before calling any function on a MAC operation object, the application must + * initialize it by any of the following means: + * - Set the structure to all-bits-zero, for example: + * \code + * psa_mac_operation_t operation; + * memset(&operation, 0, sizeof(operation)); + * \endcode + * - Initialize the structure to logical zero values, for example: + * \code + * psa_mac_operation_t operation = {0}; + * \endcode + * - Initialize the structure to the initializer #PSA_MAC_OPERATION_INIT, + * for example: + * \code + * psa_mac_operation_t operation = PSA_MAC_OPERATION_INIT; + * \endcode + * - Assign the result of the function psa_mac_operation_init() + * to the structure, for example: + * \code + * psa_mac_operation_t operation; + * operation = psa_mac_operation_init(); + * \endcode + * + * This is an implementation-defined \c struct. Applications should not + * make any assumptions about the content of this structure except + * as directed by the documentation of a specific implementation. */ +typedef struct psa_mac_operation_s psa_mac_operation_t; + +/** \def PSA_MAC_OPERATION_INIT + * + * This macro returns a suitable initializer for a MAC operation object of type + * #psa_mac_operation_t. + */ +#ifdef __DOXYGEN_ONLY__ +/* This is an example definition for documentation purposes. + * Implementations should define a suitable value in `crypto_struct.h`. + */ +#define PSA_MAC_OPERATION_INIT {0} +#endif + +/** Return an initial value for a MAC operation object. + */ +static psa_mac_operation_t psa_mac_operation_init(void); + +/** Set up a multipart MAC calculation operation. + * + * This function sets up the calculation of the MAC + * (message authentication code) of a byte string. + * To verify the MAC of a message against an + * expected value, use psa_mac_verify_setup() instead. + * + * The sequence of operations to calculate a MAC is as follows: + * -# Allocate an operation object which will be passed to all the functions + * listed here. + * -# Initialize the operation object with one of the methods described in the + * documentation for #psa_mac_operation_t, e.g. #PSA_MAC_OPERATION_INIT. + * -# Call psa_mac_sign_setup() to specify the algorithm and key. + * -# Call psa_mac_update() zero, one or more times, passing a fragment + * of the message each time. The MAC that is calculated is the MAC + * of the concatenation of these messages in order. + * -# At the end of the message, call psa_mac_sign_finish() to finish + * calculating the MAC value and retrieve it. + * + * If an error occurs at any step after a call to psa_mac_sign_setup(), the + * operation will need to be reset by a call to psa_mac_abort(). The + * application may call psa_mac_abort() at any time after the operation + * has been initialized. + * + * After a successful call to psa_mac_sign_setup(), the application must + * eventually terminate the operation through one of the following methods: + * - A successful call to psa_mac_sign_finish(). + * - A call to psa_mac_abort(). + * + * \param[in,out] operation The operation object to set up. It must have + * been initialized as per the documentation for + * #psa_mac_operation_t and not yet in use. + * \param key Identifier of the key to use for the operation. It + * must remain valid until the operation terminates. + * It must allow the usage PSA_KEY_USAGE_SIGN_MESSAGE. + * \param alg The MAC algorithm to compute (\c PSA_ALG_XXX value + * such that #PSA_ALG_IS_MAC(\p alg) is true). + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_INVALID_HANDLE + * \retval #PSA_ERROR_NOT_PERMITTED + * \retval #PSA_ERROR_INVALID_ARGUMENT + * \p key is not compatible with \p alg. + * \retval #PSA_ERROR_NOT_SUPPORTED + * \p alg is not supported or is not a MAC algorithm. + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY + * \retval #PSA_ERROR_COMMUNICATION_FAILURE + * \retval #PSA_ERROR_HARDWARE_FAILURE + * \retval #PSA_ERROR_CORRUPTION_DETECTED + * \retval #PSA_ERROR_STORAGE_FAILURE + * The key could not be retrieved from storage. + * \retval #PSA_ERROR_BAD_STATE + * The operation state is not valid (it must be inactive). + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_mac_sign_setup(psa_mac_operation_t *operation, + mbedtls_svc_key_id_t key, + psa_algorithm_t alg); + +/** Set up a multipart MAC verification operation. + * + * This function sets up the verification of the MAC + * (message authentication code) of a byte string against an expected value. + * + * The sequence of operations to verify a MAC is as follows: + * -# Allocate an operation object which will be passed to all the functions + * listed here. + * -# Initialize the operation object with one of the methods described in the + * documentation for #psa_mac_operation_t, e.g. #PSA_MAC_OPERATION_INIT. + * -# Call psa_mac_verify_setup() to specify the algorithm and key. + * -# Call psa_mac_update() zero, one or more times, passing a fragment + * of the message each time. The MAC that is calculated is the MAC + * of the concatenation of these messages in order. + * -# At the end of the message, call psa_mac_verify_finish() to finish + * calculating the actual MAC of the message and verify it against + * the expected value. + * + * If an error occurs at any step after a call to psa_mac_verify_setup(), the + * operation will need to be reset by a call to psa_mac_abort(). The + * application may call psa_mac_abort() at any time after the operation + * has been initialized. + * + * After a successful call to psa_mac_verify_setup(), the application must + * eventually terminate the operation through one of the following methods: + * - A successful call to psa_mac_verify_finish(). + * - A call to psa_mac_abort(). + * + * \param[in,out] operation The operation object to set up. It must have + * been initialized as per the documentation for + * #psa_mac_operation_t and not yet in use. + * \param key Identifier of the key to use for the operation. It + * must remain valid until the operation terminates. + * It must allow the usage + * PSA_KEY_USAGE_VERIFY_MESSAGE. + * \param alg The MAC algorithm to compute (\c PSA_ALG_XXX value + * such that #PSA_ALG_IS_MAC(\p alg) is true). + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_INVALID_HANDLE + * \retval #PSA_ERROR_NOT_PERMITTED + * \retval #PSA_ERROR_INVALID_ARGUMENT + * \c key is not compatible with \c alg. + * \retval #PSA_ERROR_NOT_SUPPORTED + * \c alg is not supported or is not a MAC algorithm. + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY + * \retval #PSA_ERROR_COMMUNICATION_FAILURE + * \retval #PSA_ERROR_HARDWARE_FAILURE + * \retval #PSA_ERROR_CORRUPTION_DETECTED + * \retval #PSA_ERROR_STORAGE_FAILURE + * The key could not be retrieved from storage + * \retval #PSA_ERROR_BAD_STATE + * The operation state is not valid (it must be inactive). + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_mac_verify_setup(psa_mac_operation_t *operation, + mbedtls_svc_key_id_t key, + psa_algorithm_t alg); + +/** Add a message fragment to a multipart MAC operation. + * + * The application must call psa_mac_sign_setup() or psa_mac_verify_setup() + * before calling this function. + * + * If this function returns an error status, the operation enters an error + * state and must be aborted by calling psa_mac_abort(). + * + * \param[in,out] operation Active MAC operation. + * \param[in] input Buffer containing the message fragment to add to + * the MAC calculation. + * \param input_length Size of the \p input buffer in bytes. + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_BAD_STATE + * The operation state is not valid (it must be active). + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY + * \retval #PSA_ERROR_COMMUNICATION_FAILURE + * \retval #PSA_ERROR_HARDWARE_FAILURE + * \retval #PSA_ERROR_CORRUPTION_DETECTED + * \retval #PSA_ERROR_STORAGE_FAILURE + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_mac_update(psa_mac_operation_t *operation, + const uint8_t *input, + size_t input_length); + +/** Finish the calculation of the MAC of a message. + * + * The application must call psa_mac_sign_setup() before calling this function. + * This function calculates the MAC of the message formed by concatenating + * the inputs passed to preceding calls to psa_mac_update(). + * + * When this function returns successfuly, the operation becomes inactive. + * If this function returns an error status, the operation enters an error + * state and must be aborted by calling psa_mac_abort(). + * + * \warning Applications should not call this function if they expect + * a specific value for the MAC. Call psa_mac_verify_finish() instead. + * Beware that comparing integrity or authenticity data such as + * MAC values with a function such as \c memcmp is risky + * because the time taken by the comparison may leak information + * about the MAC value which could allow an attacker to guess + * a valid MAC and thereby bypass security controls. + * + * \param[in,out] operation Active MAC operation. + * \param[out] mac Buffer where the MAC value is to be written. + * \param mac_size Size of the \p mac buffer in bytes. + * \param[out] mac_length On success, the number of bytes + * that make up the MAC value. This is always + * #PSA_MAC_LENGTH(\c key_type, \c key_bits, \c alg) + * where \c key_type and \c key_bits are the type and + * bit-size respectively of the key and \c alg is the + * MAC algorithm that is calculated. + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_BAD_STATE + * The operation state is not valid (it must be an active mac sign + * operation). + * \retval #PSA_ERROR_BUFFER_TOO_SMALL + * The size of the \p mac buffer is too small. You can determine a + * sufficient buffer size by calling PSA_MAC_LENGTH(). + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY + * \retval #PSA_ERROR_COMMUNICATION_FAILURE + * \retval #PSA_ERROR_HARDWARE_FAILURE + * \retval #PSA_ERROR_CORRUPTION_DETECTED + * \retval #PSA_ERROR_STORAGE_FAILURE + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_mac_sign_finish(psa_mac_operation_t *operation, + uint8_t *mac, + size_t mac_size, + size_t *mac_length); + +/** Finish the calculation of the MAC of a message and compare it with + * an expected value. + * + * The application must call psa_mac_verify_setup() before calling this function. + * This function calculates the MAC of the message formed by concatenating + * the inputs passed to preceding calls to psa_mac_update(). It then + * compares the calculated MAC with the expected MAC passed as a + * parameter to this function. + * + * When this function returns successfuly, the operation becomes inactive. + * If this function returns an error status, the operation enters an error + * state and must be aborted by calling psa_mac_abort(). + * + * \note Implementations shall make the best effort to ensure that the + * comparison between the actual MAC and the expected MAC is performed + * in constant time. + * + * \param[in,out] operation Active MAC operation. + * \param[in] mac Buffer containing the expected MAC value. + * \param mac_length Size of the \p mac buffer in bytes. + * + * \retval #PSA_SUCCESS + * The expected MAC is identical to the actual MAC of the message. + * \retval #PSA_ERROR_INVALID_SIGNATURE + * The MAC of the message was calculated successfully, but it + * differs from the expected MAC. + * \retval #PSA_ERROR_BAD_STATE + * The operation state is not valid (it must be an active mac verify + * operation). + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY + * \retval #PSA_ERROR_COMMUNICATION_FAILURE + * \retval #PSA_ERROR_HARDWARE_FAILURE + * \retval #PSA_ERROR_CORRUPTION_DETECTED + * \retval #PSA_ERROR_STORAGE_FAILURE + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_mac_verify_finish(psa_mac_operation_t *operation, + const uint8_t *mac, + size_t mac_length); + +/** Abort a MAC operation. + * + * Aborting an operation frees all associated resources except for the + * \p operation structure itself. Once aborted, the operation object + * can be reused for another operation by calling + * psa_mac_sign_setup() or psa_mac_verify_setup() again. + * + * You may call this function any time after the operation object has + * been initialized by one of the methods described in #psa_mac_operation_t. + * + * In particular, calling psa_mac_abort() after the operation has been + * terminated by a call to psa_mac_abort(), psa_mac_sign_finish() or + * psa_mac_verify_finish() is safe and has no effect. + * + * \param[in,out] operation Initialized MAC operation. + * + * \retval #PSA_SUCCESS + * \retval #PSA_ERROR_COMMUNICATION_FAILURE + * \retval #PSA_ERROR_HARDWARE_FAILURE + * \retval #PSA_ERROR_CORRUPTION_DETECTED + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_mac_abort(psa_mac_operation_t *operation); + +/**@}*/ + +/** \defgroup cipher Symmetric ciphers + * @{ + */ + +/** Encrypt a message using a symmetric cipher. + * + * This function encrypts a message with a random IV (initialization + * vector). Use the multipart operation interface with a + * #psa_cipher_operation_t object to provide other forms of IV. + * + * \param key Identifier of the key to use for the operation. + * It must allow the usage #PSA_KEY_USAGE_ENCRYPT. + * \param alg The cipher algorithm to compute + * (\c PSA_ALG_XXX value such that + * #PSA_ALG_IS_CIPHER(\p alg) is true). + * \param[in] input Buffer containing the message to encrypt. + * \param input_length Size of the \p input buffer in bytes. + * \param[out] output Buffer where the output is to be written. + * The output contains the IV followed by + * the ciphertext proper. + * \param output_size Size of the \p output buffer in bytes. + * \param[out] output_length On success, the number of bytes + * that make up the output. + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_INVALID_HANDLE + * \retval #PSA_ERROR_NOT_PERMITTED + * \retval #PSA_ERROR_INVALID_ARGUMENT + * \p key is not compatible with \p alg. + * \retval #PSA_ERROR_NOT_SUPPORTED + * \p alg is not supported or is not a cipher algorithm. + * \retval #PSA_ERROR_BUFFER_TOO_SMALL + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY + * \retval #PSA_ERROR_COMMUNICATION_FAILURE + * \retval #PSA_ERROR_HARDWARE_FAILURE + * \retval #PSA_ERROR_CORRUPTION_DETECTED + * \retval #PSA_ERROR_STORAGE_FAILURE + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_cipher_encrypt(mbedtls_svc_key_id_t key, + psa_algorithm_t alg, + const uint8_t *input, + size_t input_length, + uint8_t *output, + size_t output_size, + size_t *output_length); + +/** Decrypt a message using a symmetric cipher. + * + * This function decrypts a message encrypted with a symmetric cipher. + * + * \param key Identifier of the key to use for the operation. + * It must remain valid until the operation + * terminates. It must allow the usage + * #PSA_KEY_USAGE_DECRYPT. + * \param alg The cipher algorithm to compute + * (\c PSA_ALG_XXX value such that + * #PSA_ALG_IS_CIPHER(\p alg) is true). + * \param[in] input Buffer containing the message to decrypt. + * This consists of the IV followed by the + * ciphertext proper. + * \param input_length Size of the \p input buffer in bytes. + * \param[out] output Buffer where the plaintext is to be written. + * \param output_size Size of the \p output buffer in bytes. + * \param[out] output_length On success, the number of bytes + * that make up the output. + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_INVALID_HANDLE + * \retval #PSA_ERROR_NOT_PERMITTED + * \retval #PSA_ERROR_INVALID_ARGUMENT + * \p key is not compatible with \p alg. + * \retval #PSA_ERROR_NOT_SUPPORTED + * \p alg is not supported or is not a cipher algorithm. + * \retval #PSA_ERROR_BUFFER_TOO_SMALL + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY + * \retval #PSA_ERROR_COMMUNICATION_FAILURE + * \retval #PSA_ERROR_HARDWARE_FAILURE + * \retval #PSA_ERROR_STORAGE_FAILURE + * \retval #PSA_ERROR_CORRUPTION_DETECTED + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_cipher_decrypt(mbedtls_svc_key_id_t key, + psa_algorithm_t alg, + const uint8_t *input, + size_t input_length, + uint8_t *output, + size_t output_size, + size_t *output_length); + +/** The type of the state data structure for multipart cipher operations. + * + * Before calling any function on a cipher operation object, the application + * must initialize it by any of the following means: + * - Set the structure to all-bits-zero, for example: + * \code + * psa_cipher_operation_t operation; + * memset(&operation, 0, sizeof(operation)); + * \endcode + * - Initialize the structure to logical zero values, for example: + * \code + * psa_cipher_operation_t operation = {0}; + * \endcode + * - Initialize the structure to the initializer #PSA_CIPHER_OPERATION_INIT, + * for example: + * \code + * psa_cipher_operation_t operation = PSA_CIPHER_OPERATION_INIT; + * \endcode + * - Assign the result of the function psa_cipher_operation_init() + * to the structure, for example: + * \code + * psa_cipher_operation_t operation; + * operation = psa_cipher_operation_init(); + * \endcode + * + * This is an implementation-defined \c struct. Applications should not + * make any assumptions about the content of this structure except + * as directed by the documentation of a specific implementation. */ +typedef struct psa_cipher_operation_s psa_cipher_operation_t; + +/** \def PSA_CIPHER_OPERATION_INIT + * + * This macro returns a suitable initializer for a cipher operation object of + * type #psa_cipher_operation_t. + */ +#ifdef __DOXYGEN_ONLY__ +/* This is an example definition for documentation purposes. + * Implementations should define a suitable value in `crypto_struct.h`. + */ +#define PSA_CIPHER_OPERATION_INIT {0} +#endif + +/** Return an initial value for a cipher operation object. + */ +static psa_cipher_operation_t psa_cipher_operation_init(void); + +/** Set the key for a multipart symmetric encryption operation. + * + * The sequence of operations to encrypt a message with a symmetric cipher + * is as follows: + * -# Allocate an operation object which will be passed to all the functions + * listed here. + * -# Initialize the operation object with one of the methods described in the + * documentation for #psa_cipher_operation_t, e.g. + * #PSA_CIPHER_OPERATION_INIT. + * -# Call psa_cipher_encrypt_setup() to specify the algorithm and key. + * -# Call either psa_cipher_generate_iv() or psa_cipher_set_iv() to + * generate or set the IV (initialization vector). You should use + * psa_cipher_generate_iv() unless the protocol you are implementing + * requires a specific IV value. + * -# Call psa_cipher_update() zero, one or more times, passing a fragment + * of the message each time. + * -# Call psa_cipher_finish(). + * + * If an error occurs at any step after a call to psa_cipher_encrypt_setup(), + * the operation will need to be reset by a call to psa_cipher_abort(). The + * application may call psa_cipher_abort() at any time after the operation + * has been initialized. + * + * After a successful call to psa_cipher_encrypt_setup(), the application must + * eventually terminate the operation. The following events terminate an + * operation: + * - A successful call to psa_cipher_finish(). + * - A call to psa_cipher_abort(). + * + * \param[in,out] operation The operation object to set up. It must have + * been initialized as per the documentation for + * #psa_cipher_operation_t and not yet in use. + * \param key Identifier of the key to use for the operation. + * It must remain valid until the operation + * terminates. It must allow the usage + * #PSA_KEY_USAGE_ENCRYPT. + * \param alg The cipher algorithm to compute + * (\c PSA_ALG_XXX value such that + * #PSA_ALG_IS_CIPHER(\p alg) is true). + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_INVALID_HANDLE + * \retval #PSA_ERROR_NOT_PERMITTED + * \retval #PSA_ERROR_INVALID_ARGUMENT + * \p key is not compatible with \p alg. + * \retval #PSA_ERROR_NOT_SUPPORTED + * \p alg is not supported or is not a cipher algorithm. + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY + * \retval #PSA_ERROR_COMMUNICATION_FAILURE + * \retval #PSA_ERROR_HARDWARE_FAILURE + * \retval #PSA_ERROR_CORRUPTION_DETECTED + * \retval #PSA_ERROR_STORAGE_FAILURE + * \retval #PSA_ERROR_BAD_STATE + * The operation state is not valid (it must be inactive). + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_cipher_encrypt_setup(psa_cipher_operation_t *operation, + mbedtls_svc_key_id_t key, + psa_algorithm_t alg); + +/** Set the key for a multipart symmetric decryption operation. + * + * The sequence of operations to decrypt a message with a symmetric cipher + * is as follows: + * -# Allocate an operation object which will be passed to all the functions + * listed here. + * -# Initialize the operation object with one of the methods described in the + * documentation for #psa_cipher_operation_t, e.g. + * #PSA_CIPHER_OPERATION_INIT. + * -# Call psa_cipher_decrypt_setup() to specify the algorithm and key. + * -# Call psa_cipher_set_iv() with the IV (initialization vector) for the + * decryption. If the IV is prepended to the ciphertext, you can call + * psa_cipher_update() on a buffer containing the IV followed by the + * beginning of the message. + * -# Call psa_cipher_update() zero, one or more times, passing a fragment + * of the message each time. + * -# Call psa_cipher_finish(). + * + * If an error occurs at any step after a call to psa_cipher_decrypt_setup(), + * the operation will need to be reset by a call to psa_cipher_abort(). The + * application may call psa_cipher_abort() at any time after the operation + * has been initialized. + * + * After a successful call to psa_cipher_decrypt_setup(), the application must + * eventually terminate the operation. The following events terminate an + * operation: + * - A successful call to psa_cipher_finish(). + * - A call to psa_cipher_abort(). + * + * \param[in,out] operation The operation object to set up. It must have + * been initialized as per the documentation for + * #psa_cipher_operation_t and not yet in use. + * \param key Identifier of the key to use for the operation. + * It must remain valid until the operation + * terminates. It must allow the usage + * #PSA_KEY_USAGE_DECRYPT. + * \param alg The cipher algorithm to compute + * (\c PSA_ALG_XXX value such that + * #PSA_ALG_IS_CIPHER(\p alg) is true). + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_INVALID_HANDLE + * \retval #PSA_ERROR_NOT_PERMITTED + * \retval #PSA_ERROR_INVALID_ARGUMENT + * \p key is not compatible with \p alg. + * \retval #PSA_ERROR_NOT_SUPPORTED + * \p alg is not supported or is not a cipher algorithm. + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY + * \retval #PSA_ERROR_COMMUNICATION_FAILURE + * \retval #PSA_ERROR_HARDWARE_FAILURE + * \retval #PSA_ERROR_CORRUPTION_DETECTED + * \retval #PSA_ERROR_STORAGE_FAILURE + * \retval #PSA_ERROR_BAD_STATE + * The operation state is not valid (it must be inactive). + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_cipher_decrypt_setup(psa_cipher_operation_t *operation, + mbedtls_svc_key_id_t key, + psa_algorithm_t alg); + +/** Generate an IV for a symmetric encryption operation. + * + * This function generates a random IV (initialization vector), nonce + * or initial counter value for the encryption operation as appropriate + * for the chosen algorithm, key type and key size. + * + * The application must call psa_cipher_encrypt_setup() before + * calling this function. + * + * If this function returns an error status, the operation enters an error + * state and must be aborted by calling psa_cipher_abort(). + * + * \param[in,out] operation Active cipher operation. + * \param[out] iv Buffer where the generated IV is to be written. + * \param iv_size Size of the \p iv buffer in bytes. + * \param[out] iv_length On success, the number of bytes of the + * generated IV. + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_BAD_STATE + * The operation state is not valid (it must be active, with no IV set). + * \retval #PSA_ERROR_BUFFER_TOO_SMALL + * The size of the \p iv buffer is too small. + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY + * \retval #PSA_ERROR_COMMUNICATION_FAILURE + * \retval #PSA_ERROR_HARDWARE_FAILURE + * \retval #PSA_ERROR_CORRUPTION_DETECTED + * \retval #PSA_ERROR_STORAGE_FAILURE + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_cipher_generate_iv(psa_cipher_operation_t *operation, + uint8_t *iv, + size_t iv_size, + size_t *iv_length); + +/** Set the IV for a symmetric encryption or decryption operation. + * + * This function sets the IV (initialization vector), nonce + * or initial counter value for the encryption or decryption operation. + * + * The application must call psa_cipher_encrypt_setup() before + * calling this function. + * + * If this function returns an error status, the operation enters an error + * state and must be aborted by calling psa_cipher_abort(). + * + * \note When encrypting, applications should use psa_cipher_generate_iv() + * instead of this function, unless implementing a protocol that requires + * a non-random IV. + * + * \param[in,out] operation Active cipher operation. + * \param[in] iv Buffer containing the IV to use. + * \param iv_length Size of the IV in bytes. + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_BAD_STATE + * The operation state is not valid (it must be an active cipher + * encrypt operation, with no IV set). + * \retval #PSA_ERROR_INVALID_ARGUMENT + * The size of \p iv is not acceptable for the chosen algorithm, + * or the chosen algorithm does not use an IV. + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY + * \retval #PSA_ERROR_COMMUNICATION_FAILURE + * \retval #PSA_ERROR_HARDWARE_FAILURE + * \retval #PSA_ERROR_CORRUPTION_DETECTED + * \retval #PSA_ERROR_STORAGE_FAILURE + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_cipher_set_iv(psa_cipher_operation_t *operation, + const uint8_t *iv, + size_t iv_length); + +/** Encrypt or decrypt a message fragment in an active cipher operation. + * + * Before calling this function, you must: + * 1. Call either psa_cipher_encrypt_setup() or psa_cipher_decrypt_setup(). + * The choice of setup function determines whether this function + * encrypts or decrypts its input. + * 2. If the algorithm requires an IV, call psa_cipher_generate_iv() + * (recommended when encrypting) or psa_cipher_set_iv(). + * + * If this function returns an error status, the operation enters an error + * state and must be aborted by calling psa_cipher_abort(). + * + * \param[in,out] operation Active cipher operation. + * \param[in] input Buffer containing the message fragment to + * encrypt or decrypt. + * \param input_length Size of the \p input buffer in bytes. + * \param[out] output Buffer where the output is to be written. + * \param output_size Size of the \p output buffer in bytes. + * \param[out] output_length On success, the number of bytes + * that make up the returned output. + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_BAD_STATE + * The operation state is not valid (it must be active, with an IV set + * if required for the algorithm). + * \retval #PSA_ERROR_BUFFER_TOO_SMALL + * The size of the \p output buffer is too small. + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY + * \retval #PSA_ERROR_COMMUNICATION_FAILURE + * \retval #PSA_ERROR_HARDWARE_FAILURE + * \retval #PSA_ERROR_CORRUPTION_DETECTED + * \retval #PSA_ERROR_STORAGE_FAILURE + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_cipher_update(psa_cipher_operation_t *operation, + const uint8_t *input, + size_t input_length, + uint8_t *output, + size_t output_size, + size_t *output_length); + +/** Finish encrypting or decrypting a message in a cipher operation. + * + * The application must call psa_cipher_encrypt_setup() or + * psa_cipher_decrypt_setup() before calling this function. The choice + * of setup function determines whether this function encrypts or + * decrypts its input. + * + * This function finishes the encryption or decryption of the message + * formed by concatenating the inputs passed to preceding calls to + * psa_cipher_update(). + * + * When this function returns successfuly, the operation becomes inactive. + * If this function returns an error status, the operation enters an error + * state and must be aborted by calling psa_cipher_abort(). + * + * \param[in,out] operation Active cipher operation. + * \param[out] output Buffer where the output is to be written. + * \param output_size Size of the \p output buffer in bytes. + * \param[out] output_length On success, the number of bytes + * that make up the returned output. + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_INVALID_ARGUMENT + * The total input size passed to this operation is not valid for + * this particular algorithm. For example, the algorithm is a based + * on block cipher and requires a whole number of blocks, but the + * total input size is not a multiple of the block size. + * \retval #PSA_ERROR_INVALID_PADDING + * This is a decryption operation for an algorithm that includes + * padding, and the ciphertext does not contain valid padding. + * \retval #PSA_ERROR_BAD_STATE + * The operation state is not valid (it must be active, with an IV set + * if required for the algorithm). + * \retval #PSA_ERROR_BUFFER_TOO_SMALL + * The size of the \p output buffer is too small. + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY + * \retval #PSA_ERROR_COMMUNICATION_FAILURE + * \retval #PSA_ERROR_HARDWARE_FAILURE + * \retval #PSA_ERROR_CORRUPTION_DETECTED + * \retval #PSA_ERROR_STORAGE_FAILURE + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_cipher_finish(psa_cipher_operation_t *operation, + uint8_t *output, + size_t output_size, + size_t *output_length); + +/** Abort a cipher operation. + * + * Aborting an operation frees all associated resources except for the + * \p operation structure itself. Once aborted, the operation object + * can be reused for another operation by calling + * psa_cipher_encrypt_setup() or psa_cipher_decrypt_setup() again. + * + * You may call this function any time after the operation object has + * been initialized as described in #psa_cipher_operation_t. + * + * In particular, calling psa_cipher_abort() after the operation has been + * terminated by a call to psa_cipher_abort() or psa_cipher_finish() + * is safe and has no effect. + * + * \param[in,out] operation Initialized cipher operation. + * + * \retval #PSA_SUCCESS + * \retval #PSA_ERROR_COMMUNICATION_FAILURE + * \retval #PSA_ERROR_HARDWARE_FAILURE + * \retval #PSA_ERROR_CORRUPTION_DETECTED + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_cipher_abort(psa_cipher_operation_t *operation); + +/**@}*/ + +/** \defgroup aead Authenticated encryption with associated data (AEAD) + * @{ + */ + +/** Process an authenticated encryption operation. + * + * \param key Identifier of the key to use for the + * operation. It must allow the usage + * #PSA_KEY_USAGE_ENCRYPT. + * \param alg The AEAD algorithm to compute + * (\c PSA_ALG_XXX value such that + * #PSA_ALG_IS_AEAD(\p alg) is true). + * \param[in] nonce Nonce or IV to use. + * \param nonce_length Size of the \p nonce buffer in bytes. + * \param[in] additional_data Additional data that will be authenticated + * but not encrypted. + * \param additional_data_length Size of \p additional_data in bytes. + * \param[in] plaintext Data that will be authenticated and + * encrypted. + * \param plaintext_length Size of \p plaintext in bytes. + * \param[out] ciphertext Output buffer for the authenticated and + * encrypted data. The additional data is not + * part of this output. For algorithms where the + * encrypted data and the authentication tag + * are defined as separate outputs, the + * authentication tag is appended to the + * encrypted data. + * \param ciphertext_size Size of the \p ciphertext buffer in bytes. + * This must be appropriate for the selected + * algorithm and key: + * - A sufficient output size is + * #PSA_AEAD_ENCRYPT_OUTPUT_SIZE(\c key_type, + * \p alg, \p plaintext_length) where + * \c key_type is the type of \p key. + * - #PSA_AEAD_ENCRYPT_OUTPUT_MAX_SIZE(\p + * plaintext_length) evaluates to the maximum + * ciphertext size of any supported AEAD + * encryption. + * \param[out] ciphertext_length On success, the size of the output + * in the \p ciphertext buffer. + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_INVALID_HANDLE + * \retval #PSA_ERROR_NOT_PERMITTED + * \retval #PSA_ERROR_INVALID_ARGUMENT + * \p key is not compatible with \p alg. + * \retval #PSA_ERROR_NOT_SUPPORTED + * \p alg is not supported or is not an AEAD algorithm. + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY + * \retval #PSA_ERROR_BUFFER_TOO_SMALL + * \p ciphertext_size is too small. + * #PSA_AEAD_ENCRYPT_OUTPUT_SIZE(\c key_type, \p alg, + * \p plaintext_length) or + * #PSA_AEAD_ENCRYPT_OUTPUT_MAX_SIZE(\p plaintext_length) can be used to + * determine the required buffer size. + * \retval #PSA_ERROR_COMMUNICATION_FAILURE + * \retval #PSA_ERROR_HARDWARE_FAILURE + * \retval #PSA_ERROR_CORRUPTION_DETECTED + * \retval #PSA_ERROR_STORAGE_FAILURE + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_aead_encrypt(mbedtls_svc_key_id_t key, + psa_algorithm_t alg, + const uint8_t *nonce, + size_t nonce_length, + const uint8_t *additional_data, + size_t additional_data_length, + const uint8_t *plaintext, + size_t plaintext_length, + uint8_t *ciphertext, + size_t ciphertext_size, + size_t *ciphertext_length); + +/** Process an authenticated decryption operation. + * + * \param key Identifier of the key to use for the + * operation. It must allow the usage + * #PSA_KEY_USAGE_DECRYPT. + * \param alg The AEAD algorithm to compute + * (\c PSA_ALG_XXX value such that + * #PSA_ALG_IS_AEAD(\p alg) is true). + * \param[in] nonce Nonce or IV to use. + * \param nonce_length Size of the \p nonce buffer in bytes. + * \param[in] additional_data Additional data that has been authenticated + * but not encrypted. + * \param additional_data_length Size of \p additional_data in bytes. + * \param[in] ciphertext Data that has been authenticated and + * encrypted. For algorithms where the + * encrypted data and the authentication tag + * are defined as separate inputs, the buffer + * must contain the encrypted data followed + * by the authentication tag. + * \param ciphertext_length Size of \p ciphertext in bytes. + * \param[out] plaintext Output buffer for the decrypted data. + * \param plaintext_size Size of the \p plaintext buffer in bytes. + * This must be appropriate for the selected + * algorithm and key: + * - A sufficient output size is + * #PSA_AEAD_DECRYPT_OUTPUT_SIZE(\c key_type, + * \p alg, \p ciphertext_length) where + * \c key_type is the type of \p key. + * - #PSA_AEAD_DECRYPT_OUTPUT_MAX_SIZE(\p + * ciphertext_length) evaluates to the maximum + * plaintext size of any supported AEAD + * decryption. + * \param[out] plaintext_length On success, the size of the output + * in the \p plaintext buffer. + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_INVALID_HANDLE + * \retval #PSA_ERROR_INVALID_SIGNATURE + * The ciphertext is not authentic. + * \retval #PSA_ERROR_NOT_PERMITTED + * \retval #PSA_ERROR_INVALID_ARGUMENT + * \p key is not compatible with \p alg. + * \retval #PSA_ERROR_NOT_SUPPORTED + * \p alg is not supported or is not an AEAD algorithm. + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY + * \retval #PSA_ERROR_BUFFER_TOO_SMALL + * \p plaintext_size is too small. + * #PSA_AEAD_DECRYPT_OUTPUT_SIZE(\c key_type, \p alg, + * \p ciphertext_length) or + * #PSA_AEAD_DECRYPT_OUTPUT_MAX_SIZE(\p ciphertext_length) can be used + * to determine the required buffer size. + * \retval #PSA_ERROR_COMMUNICATION_FAILURE + * \retval #PSA_ERROR_HARDWARE_FAILURE + * \retval #PSA_ERROR_CORRUPTION_DETECTED + * \retval #PSA_ERROR_STORAGE_FAILURE + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_aead_decrypt(mbedtls_svc_key_id_t key, + psa_algorithm_t alg, + const uint8_t *nonce, + size_t nonce_length, + const uint8_t *additional_data, + size_t additional_data_length, + const uint8_t *ciphertext, + size_t ciphertext_length, + uint8_t *plaintext, + size_t plaintext_size, + size_t *plaintext_length); + +/** The type of the state data structure for multipart AEAD operations. + * + * Before calling any function on an AEAD operation object, the application + * must initialize it by any of the following means: + * - Set the structure to all-bits-zero, for example: + * \code + * psa_aead_operation_t operation; + * memset(&operation, 0, sizeof(operation)); + * \endcode + * - Initialize the structure to logical zero values, for example: + * \code + * psa_aead_operation_t operation = {0}; + * \endcode + * - Initialize the structure to the initializer #PSA_AEAD_OPERATION_INIT, + * for example: + * \code + * psa_aead_operation_t operation = PSA_AEAD_OPERATION_INIT; + * \endcode + * - Assign the result of the function psa_aead_operation_init() + * to the structure, for example: + * \code + * psa_aead_operation_t operation; + * operation = psa_aead_operation_init(); + * \endcode + * + * This is an implementation-defined \c struct. Applications should not + * make any assumptions about the content of this structure except + * as directed by the documentation of a specific implementation. */ +typedef struct psa_aead_operation_s psa_aead_operation_t; + +/** \def PSA_AEAD_OPERATION_INIT + * + * This macro returns a suitable initializer for an AEAD operation object of + * type #psa_aead_operation_t. + */ +#ifdef __DOXYGEN_ONLY__ +/* This is an example definition for documentation purposes. + * Implementations should define a suitable value in `crypto_struct.h`. + */ +#define PSA_AEAD_OPERATION_INIT {0} +#endif + +/** Return an initial value for an AEAD operation object. + */ +static psa_aead_operation_t psa_aead_operation_init(void); + +/** Set the key for a multipart authenticated encryption operation. + * + * The sequence of operations to encrypt a message with authentication + * is as follows: + * -# Allocate an operation object which will be passed to all the functions + * listed here. + * -# Initialize the operation object with one of the methods described in the + * documentation for #psa_aead_operation_t, e.g. + * #PSA_AEAD_OPERATION_INIT. + * -# Call psa_aead_encrypt_setup() to specify the algorithm and key. + * -# If needed, call psa_aead_set_lengths() to specify the length of the + * inputs to the subsequent calls to psa_aead_update_ad() and + * psa_aead_update(). See the documentation of psa_aead_set_lengths() + * for details. + * -# Call either psa_aead_generate_nonce() or psa_aead_set_nonce() to + * generate or set the nonce. You should use + * psa_aead_generate_nonce() unless the protocol you are implementing + * requires a specific nonce value. + * -# Call psa_aead_update_ad() zero, one or more times, passing a fragment + * of the non-encrypted additional authenticated data each time. + * -# Call psa_aead_update() zero, one or more times, passing a fragment + * of the message to encrypt each time. + * -# Call psa_aead_finish(). + * + * If an error occurs at any step after a call to psa_aead_encrypt_setup(), + * the operation will need to be reset by a call to psa_aead_abort(). The + * application may call psa_aead_abort() at any time after the operation + * has been initialized. + * + * After a successful call to psa_aead_encrypt_setup(), the application must + * eventually terminate the operation. The following events terminate an + * operation: + * - A successful call to psa_aead_finish(). + * - A call to psa_aead_abort(). + * + * \param[in,out] operation The operation object to set up. It must have + * been initialized as per the documentation for + * #psa_aead_operation_t and not yet in use. + * \param key Identifier of the key to use for the operation. + * It must remain valid until the operation + * terminates. It must allow the usage + * #PSA_KEY_USAGE_ENCRYPT. + * \param alg The AEAD algorithm to compute + * (\c PSA_ALG_XXX value such that + * #PSA_ALG_IS_AEAD(\p alg) is true). + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_BAD_STATE + * The operation state is not valid (it must be inactive). + * \retval #PSA_ERROR_INVALID_HANDLE + * \retval #PSA_ERROR_NOT_PERMITTED + * \retval #PSA_ERROR_INVALID_ARGUMENT + * \p key is not compatible with \p alg. + * \retval #PSA_ERROR_NOT_SUPPORTED + * \p alg is not supported or is not an AEAD algorithm. + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY + * \retval #PSA_ERROR_COMMUNICATION_FAILURE + * \retval #PSA_ERROR_HARDWARE_FAILURE + * \retval #PSA_ERROR_CORRUPTION_DETECTED + * \retval #PSA_ERROR_STORAGE_FAILURE + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_aead_encrypt_setup(psa_aead_operation_t *operation, + mbedtls_svc_key_id_t key, + psa_algorithm_t alg); + +/** Set the key for a multipart authenticated decryption operation. + * + * The sequence of operations to decrypt a message with authentication + * is as follows: + * -# Allocate an operation object which will be passed to all the functions + * listed here. + * -# Initialize the operation object with one of the methods described in the + * documentation for #psa_aead_operation_t, e.g. + * #PSA_AEAD_OPERATION_INIT. + * -# Call psa_aead_decrypt_setup() to specify the algorithm and key. + * -# If needed, call psa_aead_set_lengths() to specify the length of the + * inputs to the subsequent calls to psa_aead_update_ad() and + * psa_aead_update(). See the documentation of psa_aead_set_lengths() + * for details. + * -# Call psa_aead_set_nonce() with the nonce for the decryption. + * -# Call psa_aead_update_ad() zero, one or more times, passing a fragment + * of the non-encrypted additional authenticated data each time. + * -# Call psa_aead_update() zero, one or more times, passing a fragment + * of the ciphertext to decrypt each time. + * -# Call psa_aead_verify(). + * + * If an error occurs at any step after a call to psa_aead_decrypt_setup(), + * the operation will need to be reset by a call to psa_aead_abort(). The + * application may call psa_aead_abort() at any time after the operation + * has been initialized. + * + * After a successful call to psa_aead_decrypt_setup(), the application must + * eventually terminate the operation. The following events terminate an + * operation: + * - A successful call to psa_aead_verify(). + * - A call to psa_aead_abort(). + * + * \param[in,out] operation The operation object to set up. It must have + * been initialized as per the documentation for + * #psa_aead_operation_t and not yet in use. + * \param key Identifier of the key to use for the operation. + * It must remain valid until the operation + * terminates. It must allow the usage + * #PSA_KEY_USAGE_DECRYPT. + * \param alg The AEAD algorithm to compute + * (\c PSA_ALG_XXX value such that + * #PSA_ALG_IS_AEAD(\p alg) is true). + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_BAD_STATE + * The operation state is not valid (it must be inactive). + * \retval #PSA_ERROR_INVALID_HANDLE + * \retval #PSA_ERROR_NOT_PERMITTED + * \retval #PSA_ERROR_INVALID_ARGUMENT + * \p key is not compatible with \p alg. + * \retval #PSA_ERROR_NOT_SUPPORTED + * \p alg is not supported or is not an AEAD algorithm. + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY + * \retval #PSA_ERROR_COMMUNICATION_FAILURE + * \retval #PSA_ERROR_HARDWARE_FAILURE + * \retval #PSA_ERROR_CORRUPTION_DETECTED + * \retval #PSA_ERROR_STORAGE_FAILURE + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_aead_decrypt_setup(psa_aead_operation_t *operation, + mbedtls_svc_key_id_t key, + psa_algorithm_t alg); + +/** Generate a random nonce for an authenticated encryption operation. + * + * This function generates a random nonce for the authenticated encryption + * operation with an appropriate size for the chosen algorithm, key type + * and key size. + * + * The application must call psa_aead_encrypt_setup() before + * calling this function. + * + * If this function returns an error status, the operation enters an error + * state and must be aborted by calling psa_aead_abort(). + * + * \param[in,out] operation Active AEAD operation. + * \param[out] nonce Buffer where the generated nonce is to be + * written. + * \param nonce_size Size of the \p nonce buffer in bytes. + * \param[out] nonce_length On success, the number of bytes of the + * generated nonce. + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_BAD_STATE + * The operation state is not valid (it must be an active aead encrypt + * operation, with no nonce set). + * \retval #PSA_ERROR_BUFFER_TOO_SMALL + * The size of the \p nonce buffer is too small. + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY + * \retval #PSA_ERROR_COMMUNICATION_FAILURE + * \retval #PSA_ERROR_HARDWARE_FAILURE + * \retval #PSA_ERROR_CORRUPTION_DETECTED + * \retval #PSA_ERROR_STORAGE_FAILURE + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_aead_generate_nonce(psa_aead_operation_t *operation, + uint8_t *nonce, + size_t nonce_size, + size_t *nonce_length); + +/** Set the nonce for an authenticated encryption or decryption operation. + * + * This function sets the nonce for the authenticated + * encryption or decryption operation. + * + * The application must call psa_aead_encrypt_setup() or + * psa_aead_decrypt_setup() before calling this function. + * + * If this function returns an error status, the operation enters an error + * state and must be aborted by calling psa_aead_abort(). + * + * \note When encrypting, applications should use psa_aead_generate_nonce() + * instead of this function, unless implementing a protocol that requires + * a non-random IV. + * + * \param[in,out] operation Active AEAD operation. + * \param[in] nonce Buffer containing the nonce to use. + * \param nonce_length Size of the nonce in bytes. + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_BAD_STATE + * The operation state is not valid (it must be active, with no nonce + * set). + * \retval #PSA_ERROR_INVALID_ARGUMENT + * The size of \p nonce is not acceptable for the chosen algorithm. + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY + * \retval #PSA_ERROR_COMMUNICATION_FAILURE + * \retval #PSA_ERROR_HARDWARE_FAILURE + * \retval #PSA_ERROR_CORRUPTION_DETECTED + * \retval #PSA_ERROR_STORAGE_FAILURE + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_aead_set_nonce(psa_aead_operation_t *operation, + const uint8_t *nonce, + size_t nonce_length); + +/** Declare the lengths of the message and additional data for AEAD. + * + * The application must call this function before calling + * psa_aead_update_ad() or psa_aead_update() if the algorithm for + * the operation requires it. If the algorithm does not require it, + * calling this function is optional, but if this function is called + * then the implementation must enforce the lengths. + * + * You may call this function before or after setting the nonce with + * psa_aead_set_nonce() or psa_aead_generate_nonce(). + * + * - For #PSA_ALG_CCM, calling this function is required. + * - For the other AEAD algorithms defined in this specification, calling + * this function is not required. + * - For vendor-defined algorithm, refer to the vendor documentation. + * + * If this function returns an error status, the operation enters an error + * state and must be aborted by calling psa_aead_abort(). + * + * \param[in,out] operation Active AEAD operation. + * \param ad_length Size of the non-encrypted additional + * authenticated data in bytes. + * \param plaintext_length Size of the plaintext to encrypt in bytes. + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_BAD_STATE + * The operation state is not valid (it must be active, and + * psa_aead_update_ad() and psa_aead_update() must not have been + * called yet). + * \retval #PSA_ERROR_INVALID_ARGUMENT + * At least one of the lengths is not acceptable for the chosen + * algorithm. + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY + * \retval #PSA_ERROR_COMMUNICATION_FAILURE + * \retval #PSA_ERROR_HARDWARE_FAILURE + * \retval #PSA_ERROR_CORRUPTION_DETECTED + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_aead_set_lengths(psa_aead_operation_t *operation, + size_t ad_length, + size_t plaintext_length); + +/** Pass additional data to an active AEAD operation. + * + * Additional data is authenticated, but not encrypted. + * + * You may call this function multiple times to pass successive fragments + * of the additional data. You may not call this function after passing + * data to encrypt or decrypt with psa_aead_update(). + * + * Before calling this function, you must: + * 1. Call either psa_aead_encrypt_setup() or psa_aead_decrypt_setup(). + * 2. Set the nonce with psa_aead_generate_nonce() or psa_aead_set_nonce(). + * + * If this function returns an error status, the operation enters an error + * state and must be aborted by calling psa_aead_abort(). + * + * \warning When decrypting, until psa_aead_verify() has returned #PSA_SUCCESS, + * there is no guarantee that the input is valid. Therefore, until + * you have called psa_aead_verify() and it has returned #PSA_SUCCESS, + * treat the input as untrusted and prepare to undo any action that + * depends on the input if psa_aead_verify() returns an error status. + * + * \param[in,out] operation Active AEAD operation. + * \param[in] input Buffer containing the fragment of + * additional data. + * \param input_length Size of the \p input buffer in bytes. + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_BAD_STATE + * The operation state is not valid (it must be active, have a nonce + * set, have lengths set if required by the algorithm, and + * psa_aead_update() must not have been called yet). + * \retval #PSA_ERROR_INVALID_ARGUMENT + * The total input length overflows the additional data length that + * was previously specified with psa_aead_set_lengths(). + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY + * \retval #PSA_ERROR_COMMUNICATION_FAILURE + * \retval #PSA_ERROR_HARDWARE_FAILURE + * \retval #PSA_ERROR_CORRUPTION_DETECTED + * \retval #PSA_ERROR_STORAGE_FAILURE + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_aead_update_ad(psa_aead_operation_t *operation, + const uint8_t *input, + size_t input_length); + +/** Encrypt or decrypt a message fragment in an active AEAD operation. + * + * Before calling this function, you must: + * 1. Call either psa_aead_encrypt_setup() or psa_aead_decrypt_setup(). + * The choice of setup function determines whether this function + * encrypts or decrypts its input. + * 2. Set the nonce with psa_aead_generate_nonce() or psa_aead_set_nonce(). + * 3. Call psa_aead_update_ad() to pass all the additional data. + * + * If this function returns an error status, the operation enters an error + * state and must be aborted by calling psa_aead_abort(). + * + * \warning When decrypting, until psa_aead_verify() has returned #PSA_SUCCESS, + * there is no guarantee that the input is valid. Therefore, until + * you have called psa_aead_verify() and it has returned #PSA_SUCCESS: + * - Do not use the output in any way other than storing it in a + * confidential location. If you take any action that depends + * on the tentative decrypted data, this action will need to be + * undone if the input turns out not to be valid. Furthermore, + * if an adversary can observe that this action took place + * (for example through timing), they may be able to use this + * fact as an oracle to decrypt any message encrypted with the + * same key. + * - In particular, do not copy the output anywhere but to a + * memory or storage space that you have exclusive access to. + * + * This function does not require the input to be aligned to any + * particular block boundary. If the implementation can only process + * a whole block at a time, it must consume all the input provided, but + * it may delay the end of the corresponding output until a subsequent + * call to psa_aead_update(), psa_aead_finish() or psa_aead_verify() + * provides sufficient input. The amount of data that can be delayed + * in this way is bounded by #PSA_AEAD_UPDATE_OUTPUT_SIZE. + * + * \param[in,out] operation Active AEAD operation. + * \param[in] input Buffer containing the message fragment to + * encrypt or decrypt. + * \param input_length Size of the \p input buffer in bytes. + * \param[out] output Buffer where the output is to be written. + * \param output_size Size of the \p output buffer in bytes. + * This must be appropriate for the selected + * algorithm and key: + * - A sufficient output size is + * #PSA_AEAD_UPDATE_OUTPUT_SIZE(\c key_type, + * \c alg, \p input_length) where + * \c key_type is the type of key and \c alg is + * the algorithm that were used to set up the + * operation. + * - #PSA_AEAD_UPDATE_OUTPUT_MAX_SIZE(\p + * input_length) evaluates to the maximum + * output size of any supported AEAD + * algorithm. + * \param[out] output_length On success, the number of bytes + * that make up the returned output. + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_BAD_STATE + * The operation state is not valid (it must be active, have a nonce + * set, and have lengths set if required by the algorithm). + * \retval #PSA_ERROR_BUFFER_TOO_SMALL + * The size of the \p output buffer is too small. + * #PSA_AEAD_UPDATE_OUTPUT_SIZE(\c key_type, \c alg, \p input_length) or + * #PSA_AEAD_UPDATE_OUTPUT_MAX_SIZE(\p input_length) can be used to + * determine the required buffer size. + * \retval #PSA_ERROR_INVALID_ARGUMENT + * The total length of input to psa_aead_update_ad() so far is + * less than the additional data length that was previously + * specified with psa_aead_set_lengths(). + * \retval #PSA_ERROR_INVALID_ARGUMENT + * The total input length overflows the plaintext length that + * was previously specified with psa_aead_set_lengths(). + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY + * \retval #PSA_ERROR_COMMUNICATION_FAILURE + * \retval #PSA_ERROR_HARDWARE_FAILURE + * \retval #PSA_ERROR_CORRUPTION_DETECTED + * \retval #PSA_ERROR_STORAGE_FAILURE + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_aead_update(psa_aead_operation_t *operation, + const uint8_t *input, + size_t input_length, + uint8_t *output, + size_t output_size, + size_t *output_length); + +/** Finish encrypting a message in an AEAD operation. + * + * The operation must have been set up with psa_aead_encrypt_setup(). + * + * This function finishes the authentication of the additional data + * formed by concatenating the inputs passed to preceding calls to + * psa_aead_update_ad() with the plaintext formed by concatenating the + * inputs passed to preceding calls to psa_aead_update(). + * + * This function has two output buffers: + * - \p ciphertext contains trailing ciphertext that was buffered from + * preceding calls to psa_aead_update(). + * - \p tag contains the authentication tag. + * + * When this function returns successfuly, the operation becomes inactive. + * If this function returns an error status, the operation enters an error + * state and must be aborted by calling psa_aead_abort(). + * + * \param[in,out] operation Active AEAD operation. + * \param[out] ciphertext Buffer where the last part of the ciphertext + * is to be written. + * \param ciphertext_size Size of the \p ciphertext buffer in bytes. + * This must be appropriate for the selected + * algorithm and key: + * - A sufficient output size is + * #PSA_AEAD_FINISH_OUTPUT_SIZE(\c key_type, + * \c alg) where \c key_type is the type of key + * and \c alg is the algorithm that were used to + * set up the operation. + * - #PSA_AEAD_FINISH_OUTPUT_MAX_SIZE evaluates to + * the maximum output size of any supported AEAD + * algorithm. + * \param[out] ciphertext_length On success, the number of bytes of + * returned ciphertext. + * \param[out] tag Buffer where the authentication tag is + * to be written. + * \param tag_size Size of the \p tag buffer in bytes. + * This must be appropriate for the selected + * algorithm and key: + * - The exact tag size is #PSA_AEAD_TAG_LENGTH(\c + * key_type, \c key_bits, \c alg) where + * \c key_type and \c key_bits are the type and + * bit-size of the key, and \c alg is the + * algorithm that were used in the call to + * psa_aead_encrypt_setup(). + * - #PSA_AEAD_TAG_MAX_SIZE evaluates to the + * maximum tag size of any supported AEAD + * algorithm. + * \param[out] tag_length On success, the number of bytes + * that make up the returned tag. + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_BAD_STATE + * The operation state is not valid (it must be an active encryption + * operation with a nonce set). + * \retval #PSA_ERROR_BUFFER_TOO_SMALL + * The size of the \p ciphertext or \p tag buffer is too small. + * #PSA_AEAD_FINISH_OUTPUT_SIZE(\c key_type, \c alg) or + * #PSA_AEAD_FINISH_OUTPUT_MAX_SIZE can be used to determine the + * required \p ciphertext buffer size. #PSA_AEAD_TAG_LENGTH(\c key_type, + * \c key_bits, \c alg) or #PSA_AEAD_TAG_MAX_SIZE can be used to + * determine the required \p tag buffer size. + * \retval #PSA_ERROR_INVALID_ARGUMENT + * The total length of input to psa_aead_update_ad() so far is + * less than the additional data length that was previously + * specified with psa_aead_set_lengths(). + * \retval #PSA_ERROR_INVALID_ARGUMENT + * The total length of input to psa_aead_update() so far is + * less than the plaintext length that was previously + * specified with psa_aead_set_lengths(). + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY + * \retval #PSA_ERROR_COMMUNICATION_FAILURE + * \retval #PSA_ERROR_HARDWARE_FAILURE + * \retval #PSA_ERROR_CORRUPTION_DETECTED + * \retval #PSA_ERROR_STORAGE_FAILURE + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_aead_finish(psa_aead_operation_t *operation, + uint8_t *ciphertext, + size_t ciphertext_size, + size_t *ciphertext_length, + uint8_t *tag, + size_t tag_size, + size_t *tag_length); + +/** Finish authenticating and decrypting a message in an AEAD operation. + * + * The operation must have been set up with psa_aead_decrypt_setup(). + * + * This function finishes the authenticated decryption of the message + * components: + * + * - The additional data consisting of the concatenation of the inputs + * passed to preceding calls to psa_aead_update_ad(). + * - The ciphertext consisting of the concatenation of the inputs passed to + * preceding calls to psa_aead_update(). + * - The tag passed to this function call. + * + * If the authentication tag is correct, this function outputs any remaining + * plaintext and reports success. If the authentication tag is not correct, + * this function returns #PSA_ERROR_INVALID_SIGNATURE. + * + * When this function returns successfuly, the operation becomes inactive. + * If this function returns an error status, the operation enters an error + * state and must be aborted by calling psa_aead_abort(). + * + * \note Implementations shall make the best effort to ensure that the + * comparison between the actual tag and the expected tag is performed + * in constant time. + * + * \param[in,out] operation Active AEAD operation. + * \param[out] plaintext Buffer where the last part of the plaintext + * is to be written. This is the remaining data + * from previous calls to psa_aead_update() + * that could not be processed until the end + * of the input. + * \param plaintext_size Size of the \p plaintext buffer in bytes. + * This must be appropriate for the selected algorithm and key: + * - A sufficient output size is + * #PSA_AEAD_VERIFY_OUTPUT_SIZE(\c key_type, + * \c alg) where \c key_type is the type of key + * and \c alg is the algorithm that were used to + * set up the operation. + * - #PSA_AEAD_VERIFY_OUTPUT_MAX_SIZE evaluates to + * the maximum output size of any supported AEAD + * algorithm. + * \param[out] plaintext_length On success, the number of bytes of + * returned plaintext. + * \param[in] tag Buffer containing the authentication tag. + * \param tag_length Size of the \p tag buffer in bytes. + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_INVALID_SIGNATURE + * The calculations were successful, but the authentication tag is + * not correct. + * \retval #PSA_ERROR_BAD_STATE + * The operation state is not valid (it must be an active decryption + * operation with a nonce set). + * \retval #PSA_ERROR_BUFFER_TOO_SMALL + * The size of the \p plaintext buffer is too small. + * #PSA_AEAD_VERIFY_OUTPUT_SIZE(\c key_type, \c alg) or + * #PSA_AEAD_VERIFY_OUTPUT_MAX_SIZE can be used to determine the + * required buffer size. + * \retval #PSA_ERROR_INVALID_ARGUMENT + * The total length of input to psa_aead_update_ad() so far is + * less than the additional data length that was previously + * specified with psa_aead_set_lengths(). + * \retval #PSA_ERROR_INVALID_ARGUMENT + * The total length of input to psa_aead_update() so far is + * less than the plaintext length that was previously + * specified with psa_aead_set_lengths(). + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY + * \retval #PSA_ERROR_COMMUNICATION_FAILURE + * \retval #PSA_ERROR_HARDWARE_FAILURE + * \retval #PSA_ERROR_CORRUPTION_DETECTED + * \retval #PSA_ERROR_STORAGE_FAILURE + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_aead_verify(psa_aead_operation_t *operation, + uint8_t *plaintext, + size_t plaintext_size, + size_t *plaintext_length, + const uint8_t *tag, + size_t tag_length); + +/** Abort an AEAD operation. + * + * Aborting an operation frees all associated resources except for the + * \p operation structure itself. Once aborted, the operation object + * can be reused for another operation by calling + * psa_aead_encrypt_setup() or psa_aead_decrypt_setup() again. + * + * You may call this function any time after the operation object has + * been initialized as described in #psa_aead_operation_t. + * + * In particular, calling psa_aead_abort() after the operation has been + * terminated by a call to psa_aead_abort(), psa_aead_finish() or + * psa_aead_verify() is safe and has no effect. + * + * \param[in,out] operation Initialized AEAD operation. + * + * \retval #PSA_SUCCESS + * \retval #PSA_ERROR_COMMUNICATION_FAILURE + * \retval #PSA_ERROR_HARDWARE_FAILURE + * \retval #PSA_ERROR_CORRUPTION_DETECTED + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_aead_abort(psa_aead_operation_t *operation); + +/**@}*/ + +/** \defgroup asymmetric Asymmetric cryptography + * @{ + */ + +/** + * \brief Sign a message with a private key. For hash-and-sign algorithms, + * this includes the hashing step. + * + * \note To perform a multi-part hash-and-sign signature algorithm, first use + * a multi-part hash operation and then pass the resulting hash to + * psa_sign_hash(). PSA_ALG_GET_HASH(\p alg) can be used to determine the + * hash algorithm to use. + * + * \param[in] key Identifier of the key to use for the operation. + * It must be an asymmetric key pair. The key must + * allow the usage #PSA_KEY_USAGE_SIGN_MESSAGE. + * \param[in] alg An asymmetric signature algorithm (PSA_ALG_XXX + * value such that #PSA_ALG_IS_SIGN_MESSAGE(\p alg) + * is true), that is compatible with the type of + * \p key. + * \param[in] input The input message to sign. + * \param[in] input_length Size of the \p input buffer in bytes. + * \param[out] signature Buffer where the signature is to be written. + * \param[in] signature_size Size of the \p signature buffer in bytes. This + * must be appropriate for the selected + * algorithm and key: + * - The required signature size is + * #PSA_SIGN_OUTPUT_SIZE(\c key_type, \c key_bits, \p alg) + * where \c key_type and \c key_bits are the type and + * bit-size respectively of key. + * - #PSA_SIGNATURE_MAX_SIZE evaluates to the + * maximum signature size of any supported + * signature algorithm. + * \param[out] signature_length On success, the number of bytes that make up + * the returned signature value. + * + * \retval #PSA_SUCCESS + * \retval #PSA_ERROR_INVALID_HANDLE + * \retval #PSA_ERROR_NOT_PERMITTED + * The key does not have the #PSA_KEY_USAGE_SIGN_MESSAGE flag, + * or it does not permit the requested algorithm. + * \retval #PSA_ERROR_BUFFER_TOO_SMALL + * The size of the \p signature buffer is too small. You can + * determine a sufficient buffer size by calling + * #PSA_SIGN_OUTPUT_SIZE(\c key_type, \c key_bits, \p alg) + * where \c key_type and \c key_bits are the type and bit-size + * respectively of \p key. + * \retval #PSA_ERROR_NOT_SUPPORTED + * \retval #PSA_ERROR_INVALID_ARGUMENT + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY + * \retval #PSA_ERROR_COMMUNICATION_FAILURE + * \retval #PSA_ERROR_HARDWARE_FAILURE + * \retval #PSA_ERROR_CORRUPTION_DETECTED + * \retval #PSA_ERROR_STORAGE_FAILURE + * \retval #PSA_ERROR_DATA_CORRUPT + * \retval #PSA_ERROR_DATA_INVALID + * \retval #PSA_ERROR_INSUFFICIENT_ENTROPY + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_sign_message( mbedtls_svc_key_id_t key, + psa_algorithm_t alg, + const uint8_t * input, + size_t input_length, + uint8_t * signature, + size_t signature_size, + size_t * signature_length ); + +/** \brief Verify the signature of a message with a public key, using + * a hash-and-sign verification algorithm. + * + * \note To perform a multi-part hash-and-sign signature verification + * algorithm, first use a multi-part hash operation to hash the message + * and then pass the resulting hash to psa_verify_hash(). + * PSA_ALG_GET_HASH(\p alg) can be used to determine the hash algorithm + * to use. + * + * \param[in] key Identifier of the key to use for the operation. + * It must be a public key or an asymmetric key + * pair. The key must allow the usage + * #PSA_KEY_USAGE_VERIFY_MESSAGE. + * \param[in] alg An asymmetric signature algorithm (PSA_ALG_XXX + * value such that #PSA_ALG_IS_SIGN_MESSAGE(\p alg) + * is true), that is compatible with the type of + * \p key. + * \param[in] input The message whose signature is to be verified. + * \param[in] input_length Size of the \p input buffer in bytes. + * \param[out] signature Buffer containing the signature to verify. + * \param[in] signature_length Size of the \p signature buffer in bytes. + * + * \retval #PSA_SUCCESS + * \retval #PSA_ERROR_INVALID_HANDLE + * \retval #PSA_ERROR_NOT_PERMITTED + * The key does not have the #PSA_KEY_USAGE_SIGN_MESSAGE flag, + * or it does not permit the requested algorithm. + * \retval #PSA_ERROR_INVALID_SIGNATURE + * The calculation was performed successfully, but the passed signature + * is not a valid signature. + * \retval #PSA_ERROR_NOT_SUPPORTED + * \retval #PSA_ERROR_INVALID_ARGUMENT + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY + * \retval #PSA_ERROR_COMMUNICATION_FAILURE + * \retval #PSA_ERROR_HARDWARE_FAILURE + * \retval #PSA_ERROR_CORRUPTION_DETECTED + * \retval #PSA_ERROR_STORAGE_FAILURE + * \retval #PSA_ERROR_DATA_CORRUPT + * \retval #PSA_ERROR_DATA_INVALID + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_verify_message( mbedtls_svc_key_id_t key, + psa_algorithm_t alg, + const uint8_t * input, + size_t input_length, + const uint8_t * signature, + size_t signature_length ); + +/** + * \brief Sign a hash or short message with a private key. + * + * Note that to perform a hash-and-sign signature algorithm, you must + * first calculate the hash by calling psa_hash_setup(), psa_hash_update() + * and psa_hash_finish(), or alternatively by calling psa_hash_compute(). + * Then pass the resulting hash as the \p hash + * parameter to this function. You can use #PSA_ALG_SIGN_GET_HASH(\p alg) + * to determine the hash algorithm to use. + * + * \param key Identifier of the key to use for the operation. + * It must be an asymmetric key pair. The key must + * allow the usage #PSA_KEY_USAGE_SIGN_HASH. + * \param alg A signature algorithm that is compatible with + * the type of \p key. + * \param[in] hash The hash or message to sign. + * \param hash_length Size of the \p hash buffer in bytes. + * \param[out] signature Buffer where the signature is to be written. + * \param signature_size Size of the \p signature buffer in bytes. + * \param[out] signature_length On success, the number of bytes + * that make up the returned signature value. + * + * \retval #PSA_SUCCESS + * \retval #PSA_ERROR_INVALID_HANDLE + * \retval #PSA_ERROR_NOT_PERMITTED + * \retval #PSA_ERROR_BUFFER_TOO_SMALL + * The size of the \p signature buffer is too small. You can + * determine a sufficient buffer size by calling + * #PSA_SIGN_OUTPUT_SIZE(\c key_type, \c key_bits, \p alg) + * where \c key_type and \c key_bits are the type and bit-size + * respectively of \p key. + * \retval #PSA_ERROR_NOT_SUPPORTED + * \retval #PSA_ERROR_INVALID_ARGUMENT + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY + * \retval #PSA_ERROR_COMMUNICATION_FAILURE + * \retval #PSA_ERROR_HARDWARE_FAILURE + * \retval #PSA_ERROR_CORRUPTION_DETECTED + * \retval #PSA_ERROR_STORAGE_FAILURE + * \retval #PSA_ERROR_INSUFFICIENT_ENTROPY + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_sign_hash(mbedtls_svc_key_id_t key, + psa_algorithm_t alg, + const uint8_t *hash, + size_t hash_length, + uint8_t *signature, + size_t signature_size, + size_t *signature_length); + +/** + * \brief Verify the signature of a hash or short message using a public key. + * + * Note that to perform a hash-and-sign signature algorithm, you must + * first calculate the hash by calling psa_hash_setup(), psa_hash_update() + * and psa_hash_finish(), or alternatively by calling psa_hash_compute(). + * Then pass the resulting hash as the \p hash + * parameter to this function. You can use #PSA_ALG_SIGN_GET_HASH(\p alg) + * to determine the hash algorithm to use. + * + * \param key Identifier of the key to use for the operation. It + * must be a public key or an asymmetric key pair. The + * key must allow the usage + * #PSA_KEY_USAGE_VERIFY_HASH. + * \param alg A signature algorithm that is compatible with + * the type of \p key. + * \param[in] hash The hash or message whose signature is to be + * verified. + * \param hash_length Size of the \p hash buffer in bytes. + * \param[in] signature Buffer containing the signature to verify. + * \param signature_length Size of the \p signature buffer in bytes. + * + * \retval #PSA_SUCCESS + * The signature is valid. + * \retval #PSA_ERROR_INVALID_HANDLE + * \retval #PSA_ERROR_NOT_PERMITTED + * \retval #PSA_ERROR_INVALID_SIGNATURE + * The calculation was perfomed successfully, but the passed + * signature is not a valid signature. + * \retval #PSA_ERROR_NOT_SUPPORTED + * \retval #PSA_ERROR_INVALID_ARGUMENT + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY + * \retval #PSA_ERROR_COMMUNICATION_FAILURE + * \retval #PSA_ERROR_HARDWARE_FAILURE + * \retval #PSA_ERROR_CORRUPTION_DETECTED + * \retval #PSA_ERROR_STORAGE_FAILURE + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_verify_hash(mbedtls_svc_key_id_t key, + psa_algorithm_t alg, + const uint8_t *hash, + size_t hash_length, + const uint8_t *signature, + size_t signature_length); + +/** + * \brief Encrypt a short message with a public key. + * + * \param key Identifer of the key to use for the operation. + * It must be a public key or an asymmetric key + * pair. It must allow the usage + * #PSA_KEY_USAGE_ENCRYPT. + * \param alg An asymmetric encryption algorithm that is + * compatible with the type of \p key. + * \param[in] input The message to encrypt. + * \param input_length Size of the \p input buffer in bytes. + * \param[in] salt A salt or label, if supported by the + * encryption algorithm. + * If the algorithm does not support a + * salt, pass \c NULL. + * If the algorithm supports an optional + * salt and you do not want to pass a salt, + * pass \c NULL. + * + * - For #PSA_ALG_RSA_PKCS1V15_CRYPT, no salt is + * supported. + * \param salt_length Size of the \p salt buffer in bytes. + * If \p salt is \c NULL, pass 0. + * \param[out] output Buffer where the encrypted message is to + * be written. + * \param output_size Size of the \p output buffer in bytes. + * \param[out] output_length On success, the number of bytes + * that make up the returned output. + * + * \retval #PSA_SUCCESS + * \retval #PSA_ERROR_INVALID_HANDLE + * \retval #PSA_ERROR_NOT_PERMITTED + * \retval #PSA_ERROR_BUFFER_TOO_SMALL + * The size of the \p output buffer is too small. You can + * determine a sufficient buffer size by calling + * #PSA_ASYMMETRIC_ENCRYPT_OUTPUT_SIZE(\c key_type, \c key_bits, \p alg) + * where \c key_type and \c key_bits are the type and bit-size + * respectively of \p key. + * \retval #PSA_ERROR_NOT_SUPPORTED + * \retval #PSA_ERROR_INVALID_ARGUMENT + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY + * \retval #PSA_ERROR_COMMUNICATION_FAILURE + * \retval #PSA_ERROR_HARDWARE_FAILURE + * \retval #PSA_ERROR_CORRUPTION_DETECTED + * \retval #PSA_ERROR_STORAGE_FAILURE + * \retval #PSA_ERROR_INSUFFICIENT_ENTROPY + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_asymmetric_encrypt(mbedtls_svc_key_id_t key, + psa_algorithm_t alg, + const uint8_t *input, + size_t input_length, + const uint8_t *salt, + size_t salt_length, + uint8_t *output, + size_t output_size, + size_t *output_length); + +/** + * \brief Decrypt a short message with a private key. + * + * \param key Identifier of the key to use for the operation. + * It must be an asymmetric key pair. It must + * allow the usage #PSA_KEY_USAGE_DECRYPT. + * \param alg An asymmetric encryption algorithm that is + * compatible with the type of \p key. + * \param[in] input The message to decrypt. + * \param input_length Size of the \p input buffer in bytes. + * \param[in] salt A salt or label, if supported by the + * encryption algorithm. + * If the algorithm does not support a + * salt, pass \c NULL. + * If the algorithm supports an optional + * salt and you do not want to pass a salt, + * pass \c NULL. + * + * - For #PSA_ALG_RSA_PKCS1V15_CRYPT, no salt is + * supported. + * \param salt_length Size of the \p salt buffer in bytes. + * If \p salt is \c NULL, pass 0. + * \param[out] output Buffer where the decrypted message is to + * be written. + * \param output_size Size of the \c output buffer in bytes. + * \param[out] output_length On success, the number of bytes + * that make up the returned output. + * + * \retval #PSA_SUCCESS + * \retval #PSA_ERROR_INVALID_HANDLE + * \retval #PSA_ERROR_NOT_PERMITTED + * \retval #PSA_ERROR_BUFFER_TOO_SMALL + * The size of the \p output buffer is too small. You can + * determine a sufficient buffer size by calling + * #PSA_ASYMMETRIC_DECRYPT_OUTPUT_SIZE(\c key_type, \c key_bits, \p alg) + * where \c key_type and \c key_bits are the type and bit-size + * respectively of \p key. + * \retval #PSA_ERROR_NOT_SUPPORTED + * \retval #PSA_ERROR_INVALID_ARGUMENT + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY + * \retval #PSA_ERROR_COMMUNICATION_FAILURE + * \retval #PSA_ERROR_HARDWARE_FAILURE + * \retval #PSA_ERROR_CORRUPTION_DETECTED + * \retval #PSA_ERROR_STORAGE_FAILURE + * \retval #PSA_ERROR_INSUFFICIENT_ENTROPY + * \retval #PSA_ERROR_INVALID_PADDING + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_asymmetric_decrypt(mbedtls_svc_key_id_t key, + psa_algorithm_t alg, + const uint8_t *input, + size_t input_length, + const uint8_t *salt, + size_t salt_length, + uint8_t *output, + size_t output_size, + size_t *output_length); + +/**@}*/ + +/** \defgroup key_derivation Key derivation and pseudorandom generation + * @{ + */ + +/** The type of the state data structure for key derivation operations. + * + * Before calling any function on a key derivation operation object, the + * application must initialize it by any of the following means: + * - Set the structure to all-bits-zero, for example: + * \code + * psa_key_derivation_operation_t operation; + * memset(&operation, 0, sizeof(operation)); + * \endcode + * - Initialize the structure to logical zero values, for example: + * \code + * psa_key_derivation_operation_t operation = {0}; + * \endcode + * - Initialize the structure to the initializer #PSA_KEY_DERIVATION_OPERATION_INIT, + * for example: + * \code + * psa_key_derivation_operation_t operation = PSA_KEY_DERIVATION_OPERATION_INIT; + * \endcode + * - Assign the result of the function psa_key_derivation_operation_init() + * to the structure, for example: + * \code + * psa_key_derivation_operation_t operation; + * operation = psa_key_derivation_operation_init(); + * \endcode + * + * This is an implementation-defined \c struct. Applications should not + * make any assumptions about the content of this structure except + * as directed by the documentation of a specific implementation. + */ +typedef struct psa_key_derivation_s psa_key_derivation_operation_t; + +/** \def PSA_KEY_DERIVATION_OPERATION_INIT + * + * This macro returns a suitable initializer for a key derivation operation + * object of type #psa_key_derivation_operation_t. + */ +#ifdef __DOXYGEN_ONLY__ +/* This is an example definition for documentation purposes. + * Implementations should define a suitable value in `crypto_struct.h`. + */ +#define PSA_KEY_DERIVATION_OPERATION_INIT {0} +#endif + +/** Return an initial value for a key derivation operation object. + */ +static psa_key_derivation_operation_t psa_key_derivation_operation_init(void); + +/** Set up a key derivation operation. + * + * A key derivation algorithm takes some inputs and uses them to generate + * a byte stream in a deterministic way. + * This byte stream can be used to produce keys and other + * cryptographic material. + * + * To derive a key: + * -# Start with an initialized object of type #psa_key_derivation_operation_t. + * -# Call psa_key_derivation_setup() to select the algorithm. + * -# Provide the inputs for the key derivation by calling + * psa_key_derivation_input_bytes() or psa_key_derivation_input_key() + * as appropriate. Which inputs are needed, in what order, and whether + * they may be keys and if so of what type depends on the algorithm. + * -# Optionally set the operation's maximum capacity with + * psa_key_derivation_set_capacity(). You may do this before, in the middle + * of or after providing inputs. For some algorithms, this step is mandatory + * because the output depends on the maximum capacity. + * -# To derive a key, call psa_key_derivation_output_key(). + * To derive a byte string for a different purpose, call + * psa_key_derivation_output_bytes(). + * Successive calls to these functions use successive output bytes + * calculated by the key derivation algorithm. + * -# Clean up the key derivation operation object with + * psa_key_derivation_abort(). + * + * If this function returns an error, the key derivation operation object is + * not changed. + * + * If an error occurs at any step after a call to psa_key_derivation_setup(), + * the operation will need to be reset by a call to psa_key_derivation_abort(). + * + * Implementations must reject an attempt to derive a key of size 0. + * + * \param[in,out] operation The key derivation operation object + * to set up. It must + * have been initialized but not set up yet. + * \param alg The key derivation algorithm to compute + * (\c PSA_ALG_XXX value such that + * #PSA_ALG_IS_KEY_DERIVATION(\p alg) is true). + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_INVALID_ARGUMENT + * \c alg is not a key derivation algorithm. + * \retval #PSA_ERROR_NOT_SUPPORTED + * \c alg is not supported or is not a key derivation algorithm. + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY + * \retval #PSA_ERROR_COMMUNICATION_FAILURE + * \retval #PSA_ERROR_HARDWARE_FAILURE + * \retval #PSA_ERROR_CORRUPTION_DETECTED + * \retval #PSA_ERROR_STORAGE_FAILURE + * \retval #PSA_ERROR_BAD_STATE + * The operation state is not valid (it must be inactive). + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_key_derivation_setup( + psa_key_derivation_operation_t *operation, + psa_algorithm_t alg); + +/** Retrieve the current capacity of a key derivation operation. + * + * The capacity of a key derivation is the maximum number of bytes that it can + * return. When you get *N* bytes of output from a key derivation operation, + * this reduces its capacity by *N*. + * + * \param[in] operation The operation to query. + * \param[out] capacity On success, the capacity of the operation. + * + * \retval #PSA_SUCCESS + * \retval #PSA_ERROR_COMMUNICATION_FAILURE + * \retval #PSA_ERROR_BAD_STATE + * The operation state is not valid (it must be active). + * \retval #PSA_ERROR_HARDWARE_FAILURE + * \retval #PSA_ERROR_CORRUPTION_DETECTED + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_key_derivation_get_capacity( + const psa_key_derivation_operation_t *operation, + size_t *capacity); + +/** Set the maximum capacity of a key derivation operation. + * + * The capacity of a key derivation operation is the maximum number of bytes + * that the key derivation operation can return from this point onwards. + * + * \param[in,out] operation The key derivation operation object to modify. + * \param capacity The new capacity of the operation. + * It must be less or equal to the operation's + * current capacity. + * + * \retval #PSA_SUCCESS + * \retval #PSA_ERROR_INVALID_ARGUMENT + * \p capacity is larger than the operation's current capacity. + * In this case, the operation object remains valid and its capacity + * remains unchanged. + * \retval #PSA_ERROR_BAD_STATE + * The operation state is not valid (it must be active). + * \retval #PSA_ERROR_COMMUNICATION_FAILURE + * \retval #PSA_ERROR_HARDWARE_FAILURE + * \retval #PSA_ERROR_CORRUPTION_DETECTED + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_key_derivation_set_capacity( + psa_key_derivation_operation_t *operation, + size_t capacity); + +/** Use the maximum possible capacity for a key derivation operation. + * + * Use this value as the capacity argument when setting up a key derivation + * to indicate that the operation should have the maximum possible capacity. + * The value of the maximum possible capacity depends on the key derivation + * algorithm. + */ +#define PSA_KEY_DERIVATION_UNLIMITED_CAPACITY ((size_t)(-1)) + +/** Provide an input for key derivation or key agreement. + * + * Which inputs are required and in what order depends on the algorithm. + * Refer to the documentation of each key derivation or key agreement + * algorithm for information. + * + * This function passes direct inputs, which is usually correct for + * non-secret inputs. To pass a secret input, which should be in a key + * object, call psa_key_derivation_input_key() instead of this function. + * Refer to the documentation of individual step types + * (`PSA_KEY_DERIVATION_INPUT_xxx` values of type ::psa_key_derivation_step_t) + * for more information. + * + * If this function returns an error status, the operation enters an error + * state and must be aborted by calling psa_key_derivation_abort(). + * + * \param[in,out] operation The key derivation operation object to use. + * It must have been set up with + * psa_key_derivation_setup() and must not + * have produced any output yet. + * \param step Which step the input data is for. + * \param[in] data Input data to use. + * \param data_length Size of the \p data buffer in bytes. + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_INVALID_ARGUMENT + * \c step is not compatible with the operation's algorithm. + * \retval #PSA_ERROR_INVALID_ARGUMENT + * \c step does not allow direct inputs. + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY + * \retval #PSA_ERROR_COMMUNICATION_FAILURE + * \retval #PSA_ERROR_HARDWARE_FAILURE + * \retval #PSA_ERROR_CORRUPTION_DETECTED + * \retval #PSA_ERROR_STORAGE_FAILURE + * \retval #PSA_ERROR_BAD_STATE + * The operation state is not valid for this input \p step. + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_key_derivation_input_bytes( + psa_key_derivation_operation_t *operation, + psa_key_derivation_step_t step, + const uint8_t *data, + size_t data_length); + +/** Provide an input for key derivation in the form of a key. + * + * Which inputs are required and in what order depends on the algorithm. + * Refer to the documentation of each key derivation or key agreement + * algorithm for information. + * + * This function obtains input from a key object, which is usually correct for + * secret inputs or for non-secret personalization strings kept in the key + * store. To pass a non-secret parameter which is not in the key store, + * call psa_key_derivation_input_bytes() instead of this function. + * Refer to the documentation of individual step types + * (`PSA_KEY_DERIVATION_INPUT_xxx` values of type ::psa_key_derivation_step_t) + * for more information. + * + * If this function returns an error status, the operation enters an error + * state and must be aborted by calling psa_key_derivation_abort(). + * + * \param[in,out] operation The key derivation operation object to use. + * It must have been set up with + * psa_key_derivation_setup() and must not + * have produced any output yet. + * \param step Which step the input data is for. + * \param key Identifier of the key. It must have an + * appropriate type for step and must allow the + * usage #PSA_KEY_USAGE_DERIVE. + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_INVALID_HANDLE + * \retval #PSA_ERROR_NOT_PERMITTED + * \retval #PSA_ERROR_INVALID_ARGUMENT + * \c step is not compatible with the operation's algorithm. + * \retval #PSA_ERROR_INVALID_ARGUMENT + * \c step does not allow key inputs of the given type + * or does not allow key inputs at all. + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY + * \retval #PSA_ERROR_COMMUNICATION_FAILURE + * \retval #PSA_ERROR_HARDWARE_FAILURE + * \retval #PSA_ERROR_CORRUPTION_DETECTED + * \retval #PSA_ERROR_STORAGE_FAILURE + * \retval #PSA_ERROR_BAD_STATE + * The operation state is not valid for this input \p step. + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_key_derivation_input_key( + psa_key_derivation_operation_t *operation, + psa_key_derivation_step_t step, + mbedtls_svc_key_id_t key); + +/** Perform a key agreement and use the shared secret as input to a key + * derivation. + * + * A key agreement algorithm takes two inputs: a private key \p private_key + * a public key \p peer_key. + * The result of this function is passed as input to a key derivation. + * The output of this key derivation can be extracted by reading from the + * resulting operation to produce keys and other cryptographic material. + * + * If this function returns an error status, the operation enters an error + * state and must be aborted by calling psa_key_derivation_abort(). + * + * \param[in,out] operation The key derivation operation object to use. + * It must have been set up with + * psa_key_derivation_setup() with a + * key agreement and derivation algorithm + * \c alg (\c PSA_ALG_XXX value such that + * #PSA_ALG_IS_KEY_AGREEMENT(\c alg) is true + * and #PSA_ALG_IS_RAW_KEY_AGREEMENT(\c alg) + * is false). + * The operation must be ready for an + * input of the type given by \p step. + * \param step Which step the input data is for. + * \param private_key Identifier of the private key to use. It must + * allow the usage #PSA_KEY_USAGE_DERIVE. + * \param[in] peer_key Public key of the peer. The peer key must be in the + * same format that psa_import_key() accepts for the + * public key type corresponding to the type of + * private_key. That is, this function performs the + * equivalent of + * #psa_import_key(..., + * `peer_key`, `peer_key_length`) where + * with key attributes indicating the public key + * type corresponding to the type of `private_key`. + * For example, for EC keys, this means that peer_key + * is interpreted as a point on the curve that the + * private key is on. The standard formats for public + * keys are documented in the documentation of + * psa_export_public_key(). + * \param peer_key_length Size of \p peer_key in bytes. + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_BAD_STATE + * The operation state is not valid for this key agreement \p step. + * \retval #PSA_ERROR_INVALID_HANDLE + * \retval #PSA_ERROR_NOT_PERMITTED + * \retval #PSA_ERROR_INVALID_ARGUMENT + * \c private_key is not compatible with \c alg, + * or \p peer_key is not valid for \c alg or not compatible with + * \c private_key. + * \retval #PSA_ERROR_NOT_SUPPORTED + * \c alg is not supported or is not a key derivation algorithm. + * \retval #PSA_ERROR_INVALID_ARGUMENT + * \c step does not allow an input resulting from a key agreement. + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY + * \retval #PSA_ERROR_COMMUNICATION_FAILURE + * \retval #PSA_ERROR_HARDWARE_FAILURE + * \retval #PSA_ERROR_CORRUPTION_DETECTED + * \retval #PSA_ERROR_STORAGE_FAILURE + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_key_derivation_key_agreement( + psa_key_derivation_operation_t *operation, + psa_key_derivation_step_t step, + mbedtls_svc_key_id_t private_key, + const uint8_t *peer_key, + size_t peer_key_length); + +/** Read some data from a key derivation operation. + * + * This function calculates output bytes from a key derivation algorithm and + * return those bytes. + * If you view the key derivation's output as a stream of bytes, this + * function destructively reads the requested number of bytes from the + * stream. + * The operation's capacity decreases by the number of bytes read. + * + * If this function returns an error status other than + * #PSA_ERROR_INSUFFICIENT_DATA, the operation enters an error + * state and must be aborted by calling psa_key_derivation_abort(). + * + * \param[in,out] operation The key derivation operation object to read from. + * \param[out] output Buffer where the output will be written. + * \param output_length Number of bytes to output. + * + * \retval #PSA_SUCCESS + * \retval #PSA_ERROR_INSUFFICIENT_DATA + * The operation's capacity was less than + * \p output_length bytes. Note that in this case, + * no output is written to the output buffer. + * The operation's capacity is set to 0, thus + * subsequent calls to this function will not + * succeed, even with a smaller output buffer. + * \retval #PSA_ERROR_BAD_STATE + * The operation state is not valid (it must be active and completed + * all required input steps). + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY + * \retval #PSA_ERROR_COMMUNICATION_FAILURE + * \retval #PSA_ERROR_HARDWARE_FAILURE + * \retval #PSA_ERROR_CORRUPTION_DETECTED + * \retval #PSA_ERROR_STORAGE_FAILURE + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_key_derivation_output_bytes( + psa_key_derivation_operation_t *operation, + uint8_t *output, + size_t output_length); + +/** Derive a key from an ongoing key derivation operation. + * + * This function calculates output bytes from a key derivation algorithm + * and uses those bytes to generate a key deterministically. + * The key's location, usage policy, type and size are taken from + * \p attributes. + * + * If you view the key derivation's output as a stream of bytes, this + * function destructively reads as many bytes as required from the + * stream. + * The operation's capacity decreases by the number of bytes read. + * + * If this function returns an error status other than + * #PSA_ERROR_INSUFFICIENT_DATA, the operation enters an error + * state and must be aborted by calling psa_key_derivation_abort(). + * + * How much output is produced and consumed from the operation, and how + * the key is derived, depends on the key type and on the key size + * (denoted \c bits below): + * + * - For key types for which the key is an arbitrary sequence of bytes + * of a given size, this function is functionally equivalent to + * calling #psa_key_derivation_output_bytes + * and passing the resulting output to #psa_import_key. + * However, this function has a security benefit: + * if the implementation provides an isolation boundary then + * the key material is not exposed outside the isolation boundary. + * As a consequence, for these key types, this function always consumes + * exactly (\c bits / 8) bytes from the operation. + * The following key types defined in this specification follow this scheme: + * + * - #PSA_KEY_TYPE_AES; + * - #PSA_KEY_TYPE_ARC4; + * - #PSA_KEY_TYPE_CAMELLIA; + * - #PSA_KEY_TYPE_DERIVE; + * - #PSA_KEY_TYPE_HMAC. + * + * - For ECC keys on a Montgomery elliptic curve + * (#PSA_KEY_TYPE_ECC_KEY_PAIR(\c curve) where \c curve designates a + * Montgomery curve), this function always draws a byte string whose + * length is determined by the curve, and sets the mandatory bits + * accordingly. That is: + * + * - Curve25519 (#PSA_ECC_FAMILY_MONTGOMERY, 255 bits): draw a 32-byte + * string and process it as specified in RFC 7748 §5. + * - Curve448 (#PSA_ECC_FAMILY_MONTGOMERY, 448 bits): draw a 56-byte + * string and process it as specified in RFC 7748 §5. + * + * - For key types for which the key is represented by a single sequence of + * \c bits bits with constraints as to which bit sequences are acceptable, + * this function draws a byte string of length (\c bits / 8) bytes rounded + * up to the nearest whole number of bytes. If the resulting byte string + * is acceptable, it becomes the key, otherwise the drawn bytes are discarded. + * This process is repeated until an acceptable byte string is drawn. + * The byte string drawn from the operation is interpreted as specified + * for the output produced by psa_export_key(). + * The following key types defined in this specification follow this scheme: + * + * - #PSA_KEY_TYPE_DES. + * Force-set the parity bits, but discard forbidden weak keys. + * For 2-key and 3-key triple-DES, the three keys are generated + * successively (for example, for 3-key triple-DES, + * if the first 8 bytes specify a weak key and the next 8 bytes do not, + * discard the first 8 bytes, use the next 8 bytes as the first key, + * and continue reading output from the operation to derive the other + * two keys). + * - Finite-field Diffie-Hellman keys (#PSA_KEY_TYPE_DH_KEY_PAIR(\c group) + * where \c group designates any Diffie-Hellman group) and + * ECC keys on a Weierstrass elliptic curve + * (#PSA_KEY_TYPE_ECC_KEY_PAIR(\c curve) where \c curve designates a + * Weierstrass curve). + * For these key types, interpret the byte string as integer + * in big-endian order. Discard it if it is not in the range + * [0, *N* - 2] where *N* is the boundary of the private key domain + * (the prime *p* for Diffie-Hellman, the subprime *q* for DSA, + * or the order of the curve's base point for ECC). + * Add 1 to the resulting integer and use this as the private key *x*. + * This method allows compliance to NIST standards, specifically + * the methods titled "key-pair generation by testing candidates" + * in NIST SP 800-56A §5.6.1.1.4 for Diffie-Hellman, + * in FIPS 186-4 §B.1.2 for DSA, and + * in NIST SP 800-56A §5.6.1.2.2 or + * FIPS 186-4 §B.4.2 for elliptic curve keys. + * + * - For other key types, including #PSA_KEY_TYPE_RSA_KEY_PAIR, + * the way in which the operation output is consumed is + * implementation-defined. + * + * In all cases, the data that is read is discarded from the operation. + * The operation's capacity is decreased by the number of bytes read. + * + * For algorithms that take an input step #PSA_KEY_DERIVATION_INPUT_SECRET, + * the input to that step must be provided with psa_key_derivation_input_key(). + * Future versions of this specification may include additional restrictions + * on the derived key based on the attributes and strength of the secret key. + * + * \param[in] attributes The attributes for the new key. + * \param[in,out] operation The key derivation operation object to read from. + * \param[out] key On success, an identifier for the newly created + * key. For persistent keys, this is the key + * identifier defined in \p attributes. + * \c 0 on failure. + * + * \retval #PSA_SUCCESS + * Success. + * If the key is persistent, the key material and the key's metadata + * have been saved to persistent storage. + * \retval #PSA_ERROR_ALREADY_EXISTS + * This is an attempt to create a persistent key, and there is + * already a persistent key with the given identifier. + * \retval #PSA_ERROR_INSUFFICIENT_DATA + * There was not enough data to create the desired key. + * Note that in this case, no output is written to the output buffer. + * The operation's capacity is set to 0, thus subsequent calls to + * this function will not succeed, even with a smaller output buffer. + * \retval #PSA_ERROR_NOT_SUPPORTED + * The key type or key size is not supported, either by the + * implementation in general or in this particular location. + * \retval #PSA_ERROR_INVALID_ARGUMENT + * The provided key attributes are not valid for the operation. + * \retval #PSA_ERROR_NOT_PERMITTED + * The #PSA_KEY_DERIVATION_INPUT_SECRET input was not provided through + * a key. + * \retval #PSA_ERROR_BAD_STATE + * The operation state is not valid (it must be active and completed + * all required input steps). + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY + * \retval #PSA_ERROR_INSUFFICIENT_STORAGE + * \retval #PSA_ERROR_COMMUNICATION_FAILURE + * \retval #PSA_ERROR_HARDWARE_FAILURE + * \retval #PSA_ERROR_CORRUPTION_DETECTED + * \retval #PSA_ERROR_DATA_INVALID + * \retval #PSA_ERROR_DATA_CORRUPT + * \retval #PSA_ERROR_STORAGE_FAILURE + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_key_derivation_output_key( + const psa_key_attributes_t *attributes, + psa_key_derivation_operation_t *operation, + mbedtls_svc_key_id_t *key); + +/** Abort a key derivation operation. + * + * Aborting an operation frees all associated resources except for the \c + * operation structure itself. Once aborted, the operation object can be reused + * for another operation by calling psa_key_derivation_setup() again. + * + * This function may be called at any time after the operation + * object has been initialized as described in #psa_key_derivation_operation_t. + * + * In particular, it is valid to call psa_key_derivation_abort() twice, or to + * call psa_key_derivation_abort() on an operation that has not been set up. + * + * \param[in,out] operation The operation to abort. + * + * \retval #PSA_SUCCESS + * \retval #PSA_ERROR_COMMUNICATION_FAILURE + * \retval #PSA_ERROR_HARDWARE_FAILURE + * \retval #PSA_ERROR_CORRUPTION_DETECTED + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_key_derivation_abort( + psa_key_derivation_operation_t *operation); + +/** Perform a key agreement and return the raw shared secret. + * + * \warning The raw result of a key agreement algorithm such as finite-field + * Diffie-Hellman or elliptic curve Diffie-Hellman has biases and should + * not be used directly as key material. It should instead be passed as + * input to a key derivation algorithm. To chain a key agreement with + * a key derivation, use psa_key_derivation_key_agreement() and other + * functions from the key derivation interface. + * + * \param alg The key agreement algorithm to compute + * (\c PSA_ALG_XXX value such that + * #PSA_ALG_IS_RAW_KEY_AGREEMENT(\p alg) + * is true). + * \param private_key Identifier of the private key to use. It must + * allow the usage #PSA_KEY_USAGE_DERIVE. + * \param[in] peer_key Public key of the peer. It must be + * in the same format that psa_import_key() + * accepts. The standard formats for public + * keys are documented in the documentation + * of psa_export_public_key(). + * \param peer_key_length Size of \p peer_key in bytes. + * \param[out] output Buffer where the decrypted message is to + * be written. + * \param output_size Size of the \c output buffer in bytes. + * \param[out] output_length On success, the number of bytes + * that make up the returned output. + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_INVALID_HANDLE + * \retval #PSA_ERROR_NOT_PERMITTED + * \retval #PSA_ERROR_INVALID_ARGUMENT + * \p alg is not a key agreement algorithm + * \retval #PSA_ERROR_INVALID_ARGUMENT + * \p private_key is not compatible with \p alg, + * or \p peer_key is not valid for \p alg or not compatible with + * \p private_key. + * \retval #PSA_ERROR_BUFFER_TOO_SMALL + * \p output_size is too small + * \retval #PSA_ERROR_NOT_SUPPORTED + * \p alg is not a supported key agreement algorithm. + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY + * \retval #PSA_ERROR_COMMUNICATION_FAILURE + * \retval #PSA_ERROR_HARDWARE_FAILURE + * \retval #PSA_ERROR_CORRUPTION_DETECTED + * \retval #PSA_ERROR_STORAGE_FAILURE + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_raw_key_agreement(psa_algorithm_t alg, + mbedtls_svc_key_id_t private_key, + const uint8_t *peer_key, + size_t peer_key_length, + uint8_t *output, + size_t output_size, + size_t *output_length); + +/**@}*/ + +/** \defgroup random Random generation + * @{ + */ + +/** + * \brief Generate random bytes. + * + * \warning This function **can** fail! Callers MUST check the return status + * and MUST NOT use the content of the output buffer if the return + * status is not #PSA_SUCCESS. + * + * \note To generate a key, use psa_generate_key() instead. + * + * \param[out] output Output buffer for the generated data. + * \param output_size Number of bytes to generate and output. + * + * \retval #PSA_SUCCESS + * \retval #PSA_ERROR_NOT_SUPPORTED + * \retval #PSA_ERROR_INSUFFICIENT_ENTROPY + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY + * \retval #PSA_ERROR_COMMUNICATION_FAILURE + * \retval #PSA_ERROR_HARDWARE_FAILURE + * \retval #PSA_ERROR_CORRUPTION_DETECTED + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_generate_random(uint8_t *output, + size_t output_size); + +/** + * \brief Generate a key or key pair. + * + * The key is generated randomly. + * Its location, usage policy, type and size are taken from \p attributes. + * + * Implementations must reject an attempt to generate a key of size 0. + * + * The following type-specific considerations apply: + * - For RSA keys (#PSA_KEY_TYPE_RSA_KEY_PAIR), + * the public exponent is 65537. + * The modulus is a product of two probabilistic primes + * between 2^{n-1} and 2^n where n is the bit size specified in the + * attributes. + * + * \param[in] attributes The attributes for the new key. + * \param[out] key On success, an identifier for the newly created + * key. For persistent keys, this is the key + * identifier defined in \p attributes. + * \c 0 on failure. + * + * \retval #PSA_SUCCESS + * Success. + * If the key is persistent, the key material and the key's metadata + * have been saved to persistent storage. + * \retval #PSA_ERROR_ALREADY_EXISTS + * This is an attempt to create a persistent key, and there is + * already a persistent key with the given identifier. + * \retval #PSA_ERROR_NOT_SUPPORTED + * \retval #PSA_ERROR_INVALID_ARGUMENT + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY + * \retval #PSA_ERROR_INSUFFICIENT_ENTROPY + * \retval #PSA_ERROR_COMMUNICATION_FAILURE + * \retval #PSA_ERROR_HARDWARE_FAILURE + * \retval #PSA_ERROR_CORRUPTION_DETECTED + * \retval #PSA_ERROR_INSUFFICIENT_STORAGE + * \retval #PSA_ERROR_DATA_INVALID + * \retval #PSA_ERROR_DATA_CORRUPT + * \retval #PSA_ERROR_STORAGE_FAILURE + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_generate_key(const psa_key_attributes_t *attributes, + mbedtls_svc_key_id_t *key); + +/**@}*/ + +#ifdef __cplusplus +} +#endif + +/* The file "crypto_sizes.h" contains definitions for size calculation + * macros whose definitions are implementation-specific. */ +#include "crypto_sizes.h" + +/* The file "crypto_struct.h" contains definitions for + * implementation-specific structs that are declared above. */ +#include "crypto_struct.h" + +/* The file "crypto_extra.h" contains vendor-specific definitions. This + * can include vendor-defined algorithms, extra functions, etc. */ +#include "crypto_extra.h" + +#endif /* PSA_CRYPTO_H */ |