diff options
Diffstat (limited to 'lib/mbedtls-2.27.0/include/mbedtls/ssl.h')
| -rw-r--r-- | lib/mbedtls-2.27.0/include/mbedtls/ssl.h | 4356 |
1 files changed, 4356 insertions, 0 deletions
diff --git a/lib/mbedtls-2.27.0/include/mbedtls/ssl.h b/lib/mbedtls-2.27.0/include/mbedtls/ssl.h new file mode 100644 index 0000000..30dfbce --- /dev/null +++ b/lib/mbedtls-2.27.0/include/mbedtls/ssl.h @@ -0,0 +1,4356 @@ +/** + * \file ssl.h + * + * \brief SSL/TLS functions. + */ +/* + * Copyright The Mbed TLS Contributors + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#ifndef MBEDTLS_SSL_H +#define MBEDTLS_SSL_H + +#if !defined(MBEDTLS_CONFIG_FILE) +#include "mbedtls/config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif + +#include "mbedtls/bignum.h" +#include "mbedtls/ecp.h" + +#include "mbedtls/ssl_ciphersuites.h" + +#if defined(MBEDTLS_X509_CRT_PARSE_C) +#include "mbedtls/x509_crt.h" +#include "mbedtls/x509_crl.h" +#endif + +#if defined(MBEDTLS_DHM_C) +#include "mbedtls/dhm.h" +#endif + +/* Adding guard for MBEDTLS_ECDSA_C to ensure no compile errors due + * to guards also being in ssl_srv.c and ssl_cli.c. There is a gap + * in functionality that access to ecdh_ctx structure is needed for + * MBEDTLS_ECDSA_C which does not seem correct. + */ +#if defined(MBEDTLS_ECDH_C) || defined(MBEDTLS_ECDSA_C) +#include "mbedtls/ecdh.h" +#endif + +#if defined(MBEDTLS_ZLIB_SUPPORT) + +#if defined(MBEDTLS_DEPRECATED_WARNING) +#warning "Record compression support via MBEDTLS_ZLIB_SUPPORT is deprecated and will be removed in the next major revision of the library" +#endif + +#if defined(MBEDTLS_DEPRECATED_REMOVED) +#error "Record compression support via MBEDTLS_ZLIB_SUPPORT is deprecated and cannot be used if MBEDTLS_DEPRECATED_REMOVED is set" +#endif + +#include "zlib.h" +#endif + +#if defined(MBEDTLS_HAVE_TIME) +#include "mbedtls/platform_time.h" +#endif + +#if defined(MBEDTLS_USE_PSA_CRYPTO) +#include "psa/crypto.h" +#endif /* MBEDTLS_USE_PSA_CRYPTO */ + +/* + * SSL Error codes + */ +#define MBEDTLS_ERR_SSL_FEATURE_UNAVAILABLE -0x7080 /**< The requested feature is not available. */ +#define MBEDTLS_ERR_SSL_BAD_INPUT_DATA -0x7100 /**< Bad input parameters to function. */ +#define MBEDTLS_ERR_SSL_INVALID_MAC -0x7180 /**< Verification of the message MAC failed. */ +#define MBEDTLS_ERR_SSL_INVALID_RECORD -0x7200 /**< An invalid SSL record was received. */ +#define MBEDTLS_ERR_SSL_CONN_EOF -0x7280 /**< The connection indicated an EOF. */ +#define MBEDTLS_ERR_SSL_UNKNOWN_CIPHER -0x7300 /**< An unknown cipher was received. */ +#define MBEDTLS_ERR_SSL_NO_CIPHER_CHOSEN -0x7380 /**< The server has no ciphersuites in common with the client. */ +#define MBEDTLS_ERR_SSL_NO_RNG -0x7400 /**< No RNG was provided to the SSL module. */ +#define MBEDTLS_ERR_SSL_NO_CLIENT_CERTIFICATE -0x7480 /**< No client certification received from the client, but required by the authentication mode. */ +#define MBEDTLS_ERR_SSL_CERTIFICATE_TOO_LARGE -0x7500 /**< Our own certificate(s) is/are too large to send in an SSL message. */ +#define MBEDTLS_ERR_SSL_CERTIFICATE_REQUIRED -0x7580 /**< The own certificate is not set, but needed by the server. */ +#define MBEDTLS_ERR_SSL_PRIVATE_KEY_REQUIRED -0x7600 /**< The own private key or pre-shared key is not set, but needed. */ +#define MBEDTLS_ERR_SSL_CA_CHAIN_REQUIRED -0x7680 /**< No CA Chain is set, but required to operate. */ +#define MBEDTLS_ERR_SSL_UNEXPECTED_MESSAGE -0x7700 /**< An unexpected message was received from our peer. */ +#define MBEDTLS_ERR_SSL_FATAL_ALERT_MESSAGE -0x7780 /**< A fatal alert message was received from our peer. */ +#define MBEDTLS_ERR_SSL_PEER_VERIFY_FAILED -0x7800 /**< Verification of our peer failed. */ +#define MBEDTLS_ERR_SSL_PEER_CLOSE_NOTIFY -0x7880 /**< The peer notified us that the connection is going to be closed. */ +#define MBEDTLS_ERR_SSL_BAD_HS_CLIENT_HELLO -0x7900 /**< Processing of the ClientHello handshake message failed. */ +#define MBEDTLS_ERR_SSL_BAD_HS_SERVER_HELLO -0x7980 /**< Processing of the ServerHello handshake message failed. */ +#define MBEDTLS_ERR_SSL_BAD_HS_CERTIFICATE -0x7A00 /**< Processing of the Certificate handshake message failed. */ +#define MBEDTLS_ERR_SSL_BAD_HS_CERTIFICATE_REQUEST -0x7A80 /**< Processing of the CertificateRequest handshake message failed. */ +#define MBEDTLS_ERR_SSL_BAD_HS_SERVER_KEY_EXCHANGE -0x7B00 /**< Processing of the ServerKeyExchange handshake message failed. */ +#define MBEDTLS_ERR_SSL_BAD_HS_SERVER_HELLO_DONE -0x7B80 /**< Processing of the ServerHelloDone handshake message failed. */ +#define MBEDTLS_ERR_SSL_BAD_HS_CLIENT_KEY_EXCHANGE -0x7C00 /**< Processing of the ClientKeyExchange handshake message failed. */ +#define MBEDTLS_ERR_SSL_BAD_HS_CLIENT_KEY_EXCHANGE_RP -0x7C80 /**< Processing of the ClientKeyExchange handshake message failed in DHM / ECDH Read Public. */ +#define MBEDTLS_ERR_SSL_BAD_HS_CLIENT_KEY_EXCHANGE_CS -0x7D00 /**< Processing of the ClientKeyExchange handshake message failed in DHM / ECDH Calculate Secret. */ +#define MBEDTLS_ERR_SSL_BAD_HS_CERTIFICATE_VERIFY -0x7D80 /**< Processing of the CertificateVerify handshake message failed. */ +#define MBEDTLS_ERR_SSL_BAD_HS_CHANGE_CIPHER_SPEC -0x7E00 /**< Processing of the ChangeCipherSpec handshake message failed. */ +#define MBEDTLS_ERR_SSL_BAD_HS_FINISHED -0x7E80 /**< Processing of the Finished handshake message failed. */ +#define MBEDTLS_ERR_SSL_ALLOC_FAILED -0x7F00 /**< Memory allocation failed */ +#define MBEDTLS_ERR_SSL_HW_ACCEL_FAILED -0x7F80 /**< Hardware acceleration function returned with error */ +#define MBEDTLS_ERR_SSL_HW_ACCEL_FALLTHROUGH -0x6F80 /**< Hardware acceleration function skipped / left alone data */ +#define MBEDTLS_ERR_SSL_COMPRESSION_FAILED -0x6F00 /**< Processing of the compression / decompression failed */ +#define MBEDTLS_ERR_SSL_BAD_HS_PROTOCOL_VERSION -0x6E80 /**< Handshake protocol not within min/max boundaries */ +#define MBEDTLS_ERR_SSL_BAD_HS_NEW_SESSION_TICKET -0x6E00 /**< Processing of the NewSessionTicket handshake message failed. */ +#define MBEDTLS_ERR_SSL_SESSION_TICKET_EXPIRED -0x6D80 /**< Session ticket has expired. */ +#define MBEDTLS_ERR_SSL_PK_TYPE_MISMATCH -0x6D00 /**< Public key type mismatch (eg, asked for RSA key exchange and presented EC key) */ +#define MBEDTLS_ERR_SSL_UNKNOWN_IDENTITY -0x6C80 /**< Unknown identity received (eg, PSK identity) */ +#define MBEDTLS_ERR_SSL_INTERNAL_ERROR -0x6C00 /**< Internal error (eg, unexpected failure in lower-level module) */ +#define MBEDTLS_ERR_SSL_COUNTER_WRAPPING -0x6B80 /**< A counter would wrap (eg, too many messages exchanged). */ +#define MBEDTLS_ERR_SSL_WAITING_SERVER_HELLO_RENEGO -0x6B00 /**< Unexpected message at ServerHello in renegotiation. */ +#define MBEDTLS_ERR_SSL_HELLO_VERIFY_REQUIRED -0x6A80 /**< DTLS client must retry for hello verification */ +#define MBEDTLS_ERR_SSL_BUFFER_TOO_SMALL -0x6A00 /**< A buffer is too small to receive or write a message */ +#define MBEDTLS_ERR_SSL_NO_USABLE_CIPHERSUITE -0x6980 /**< None of the common ciphersuites is usable (eg, no suitable certificate, see debug messages). */ +#define MBEDTLS_ERR_SSL_WANT_READ -0x6900 /**< No data of requested type currently available on underlying transport. */ +#define MBEDTLS_ERR_SSL_WANT_WRITE -0x6880 /**< Connection requires a write call. */ +#define MBEDTLS_ERR_SSL_TIMEOUT -0x6800 /**< The operation timed out. */ +#define MBEDTLS_ERR_SSL_CLIENT_RECONNECT -0x6780 /**< The client initiated a reconnect from the same port. */ +#define MBEDTLS_ERR_SSL_UNEXPECTED_RECORD -0x6700 /**< Record header looks valid but is not expected. */ +#define MBEDTLS_ERR_SSL_NON_FATAL -0x6680 /**< The alert message received indicates a non-fatal error. */ +#define MBEDTLS_ERR_SSL_INVALID_VERIFY_HASH -0x6600 /**< Couldn't set the hash for verifying CertificateVerify */ +#define MBEDTLS_ERR_SSL_CONTINUE_PROCESSING -0x6580 /**< Internal-only message signaling that further message-processing should be done */ +#define MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS -0x6500 /**< The asynchronous operation is not completed yet. */ +#define MBEDTLS_ERR_SSL_EARLY_MESSAGE -0x6480 /**< Internal-only message signaling that a message arrived early. */ +#define MBEDTLS_ERR_SSL_UNEXPECTED_CID -0x6000 /**< An encrypted DTLS-frame with an unexpected CID was received. */ +#define MBEDTLS_ERR_SSL_VERSION_MISMATCH -0x5F00 /**< An operation failed due to an unexpected version or configuration. */ +#define MBEDTLS_ERR_SSL_CRYPTO_IN_PROGRESS -0x7000 /**< A cryptographic operation is in progress. Try again later. */ +#define MBEDTLS_ERR_SSL_BAD_CONFIG -0x5E80 /**< Invalid value in SSL config */ + +/* + * Various constants + */ +#define MBEDTLS_SSL_MAJOR_VERSION_3 3 +#define MBEDTLS_SSL_MINOR_VERSION_0 0 /*!< SSL v3.0 */ +#define MBEDTLS_SSL_MINOR_VERSION_1 1 /*!< TLS v1.0 */ +#define MBEDTLS_SSL_MINOR_VERSION_2 2 /*!< TLS v1.1 */ +#define MBEDTLS_SSL_MINOR_VERSION_3 3 /*!< TLS v1.2 */ +#define MBEDTLS_SSL_MINOR_VERSION_4 4 /*!< TLS v1.3 (experimental) */ + +#define MBEDTLS_SSL_TRANSPORT_STREAM 0 /*!< TLS */ +#define MBEDTLS_SSL_TRANSPORT_DATAGRAM 1 /*!< DTLS */ + +#define MBEDTLS_SSL_MAX_HOST_NAME_LEN 255 /*!< Maximum host name defined in RFC 1035 */ +#define MBEDTLS_SSL_MAX_ALPN_NAME_LEN 255 /*!< Maximum size in bytes of a protocol name in alpn ext., RFC 7301 */ + +#define MBEDTLS_SSL_MAX_ALPN_LIST_LEN 65535 /*!< Maximum size in bytes of list in alpn ext., RFC 7301 */ + +/* RFC 6066 section 4, see also mfl_code_to_length in ssl_tls.c + * NONE must be zero so that memset()ing structure to zero works */ +#define MBEDTLS_SSL_MAX_FRAG_LEN_NONE 0 /*!< don't use this extension */ +#define MBEDTLS_SSL_MAX_FRAG_LEN_512 1 /*!< MaxFragmentLength 2^9 */ +#define MBEDTLS_SSL_MAX_FRAG_LEN_1024 2 /*!< MaxFragmentLength 2^10 */ +#define MBEDTLS_SSL_MAX_FRAG_LEN_2048 3 /*!< MaxFragmentLength 2^11 */ +#define MBEDTLS_SSL_MAX_FRAG_LEN_4096 4 /*!< MaxFragmentLength 2^12 */ +#define MBEDTLS_SSL_MAX_FRAG_LEN_INVALID 5 /*!< first invalid value */ + +#define MBEDTLS_SSL_IS_CLIENT 0 +#define MBEDTLS_SSL_IS_SERVER 1 + +#define MBEDTLS_SSL_IS_NOT_FALLBACK 0 +#define MBEDTLS_SSL_IS_FALLBACK 1 + +#define MBEDTLS_SSL_EXTENDED_MS_DISABLED 0 +#define MBEDTLS_SSL_EXTENDED_MS_ENABLED 1 + +#define MBEDTLS_SSL_CID_DISABLED 0 +#define MBEDTLS_SSL_CID_ENABLED 1 + +#define MBEDTLS_SSL_ETM_DISABLED 0 +#define MBEDTLS_SSL_ETM_ENABLED 1 + +#define MBEDTLS_SSL_COMPRESS_NULL 0 +#define MBEDTLS_SSL_COMPRESS_DEFLATE 1 + +#define MBEDTLS_SSL_VERIFY_NONE 0 +#define MBEDTLS_SSL_VERIFY_OPTIONAL 1 +#define MBEDTLS_SSL_VERIFY_REQUIRED 2 +#define MBEDTLS_SSL_VERIFY_UNSET 3 /* Used only for sni_authmode */ + +#define MBEDTLS_SSL_LEGACY_RENEGOTIATION 0 +#define MBEDTLS_SSL_SECURE_RENEGOTIATION 1 + +#define MBEDTLS_SSL_RENEGOTIATION_DISABLED 0 +#define MBEDTLS_SSL_RENEGOTIATION_ENABLED 1 + +#define MBEDTLS_SSL_ANTI_REPLAY_DISABLED 0 +#define MBEDTLS_SSL_ANTI_REPLAY_ENABLED 1 + +#define MBEDTLS_SSL_RENEGOTIATION_NOT_ENFORCED -1 +#define MBEDTLS_SSL_RENEGO_MAX_RECORDS_DEFAULT 16 + +#define MBEDTLS_SSL_LEGACY_NO_RENEGOTIATION 0 +#define MBEDTLS_SSL_LEGACY_ALLOW_RENEGOTIATION 1 +#define MBEDTLS_SSL_LEGACY_BREAK_HANDSHAKE 2 + +#define MBEDTLS_SSL_TRUNC_HMAC_DISABLED 0 +#define MBEDTLS_SSL_TRUNC_HMAC_ENABLED 1 +#define MBEDTLS_SSL_TRUNCATED_HMAC_LEN 10 /* 80 bits, rfc 6066 section 7 */ + +#define MBEDTLS_SSL_SESSION_TICKETS_DISABLED 0 +#define MBEDTLS_SSL_SESSION_TICKETS_ENABLED 1 + +#define MBEDTLS_SSL_CBC_RECORD_SPLITTING_DISABLED 0 +#define MBEDTLS_SSL_CBC_RECORD_SPLITTING_ENABLED 1 + +#define MBEDTLS_SSL_ARC4_ENABLED 0 +#define MBEDTLS_SSL_ARC4_DISABLED 1 + +#define MBEDTLS_SSL_PRESET_DEFAULT 0 +#define MBEDTLS_SSL_PRESET_SUITEB 2 + +#define MBEDTLS_SSL_CERT_REQ_CA_LIST_ENABLED 1 +#define MBEDTLS_SSL_CERT_REQ_CA_LIST_DISABLED 0 + +#define MBEDTLS_SSL_DTLS_SRTP_MKI_UNSUPPORTED 0 +#define MBEDTLS_SSL_DTLS_SRTP_MKI_SUPPORTED 1 + +/* + * Default range for DTLS retransmission timer value, in milliseconds. + * RFC 6347 4.2.4.1 says from 1 second to 60 seconds. + */ +#define MBEDTLS_SSL_DTLS_TIMEOUT_DFL_MIN 1000 +#define MBEDTLS_SSL_DTLS_TIMEOUT_DFL_MAX 60000 + +/** + * \name SECTION: Module settings + * + * The configuration options you can set for this module are in this section. + * Either change them in config.h or define them on the compiler command line. + * \{ + */ + +#if !defined(MBEDTLS_SSL_DEFAULT_TICKET_LIFETIME) +#define MBEDTLS_SSL_DEFAULT_TICKET_LIFETIME 86400 /**< Lifetime of session tickets (if enabled) */ +#endif + +/* + * Maximum fragment length in bytes, + * determines the size of each of the two internal I/O buffers. + * + * Note: the RFC defines the default size of SSL / TLS messages. If you + * change the value here, other clients / servers may not be able to + * communicate with you anymore. Only change this value if you control + * both sides of the connection and have it reduced at both sides, or + * if you're using the Max Fragment Length extension and you know all your + * peers are using it too! + */ +#if !defined(MBEDTLS_SSL_MAX_CONTENT_LEN) +#define MBEDTLS_SSL_MAX_CONTENT_LEN 16384 /**< Size of the input / output buffer */ +#endif + +#if !defined(MBEDTLS_SSL_IN_CONTENT_LEN) +#define MBEDTLS_SSL_IN_CONTENT_LEN MBEDTLS_SSL_MAX_CONTENT_LEN +#endif + +#if !defined(MBEDTLS_SSL_OUT_CONTENT_LEN) +#define MBEDTLS_SSL_OUT_CONTENT_LEN MBEDTLS_SSL_MAX_CONTENT_LEN +#endif + +/* + * Maximum number of heap-allocated bytes for the purpose of + * DTLS handshake message reassembly and future message buffering. + */ +#if !defined(MBEDTLS_SSL_DTLS_MAX_BUFFERING) +#define MBEDTLS_SSL_DTLS_MAX_BUFFERING 32768 +#endif + +/* + * Maximum length of CIDs for incoming and outgoing messages. + */ +#if !defined(MBEDTLS_SSL_CID_IN_LEN_MAX) +#define MBEDTLS_SSL_CID_IN_LEN_MAX 32 +#endif + +#if !defined(MBEDTLS_SSL_CID_OUT_LEN_MAX) +#define MBEDTLS_SSL_CID_OUT_LEN_MAX 32 +#endif + +#if !defined(MBEDTLS_SSL_CID_PADDING_GRANULARITY) +#define MBEDTLS_SSL_CID_PADDING_GRANULARITY 16 +#endif + +#if !defined(MBEDTLS_SSL_TLS1_3_PADDING_GRANULARITY) +#define MBEDTLS_SSL_TLS1_3_PADDING_GRANULARITY 1 +#endif + +/* \} name SECTION: Module settings */ + +/* + * Length of the verify data for secure renegotiation + */ +#if defined(MBEDTLS_SSL_PROTO_SSL3) +#define MBEDTLS_SSL_VERIFY_DATA_MAX_LEN 36 +#else +#define MBEDTLS_SSL_VERIFY_DATA_MAX_LEN 12 +#endif + +/* + * Signaling ciphersuite values (SCSV) + */ +#define MBEDTLS_SSL_EMPTY_RENEGOTIATION_INFO 0xFF /**< renegotiation info ext */ +#define MBEDTLS_SSL_FALLBACK_SCSV_VALUE 0x5600 /**< RFC 7507 section 2 */ + +/* + * Supported Signature and Hash algorithms (For TLS 1.2) + * RFC 5246 section 7.4.1.4.1 + */ +#define MBEDTLS_SSL_HASH_NONE 0 +#define MBEDTLS_SSL_HASH_MD5 1 +#define MBEDTLS_SSL_HASH_SHA1 2 +#define MBEDTLS_SSL_HASH_SHA224 3 +#define MBEDTLS_SSL_HASH_SHA256 4 +#define MBEDTLS_SSL_HASH_SHA384 5 +#define MBEDTLS_SSL_HASH_SHA512 6 + +#define MBEDTLS_SSL_SIG_ANON 0 +#define MBEDTLS_SSL_SIG_RSA 1 +#define MBEDTLS_SSL_SIG_ECDSA 3 + +/* + * Client Certificate Types + * RFC 5246 section 7.4.4 plus RFC 4492 section 5.5 + */ +#define MBEDTLS_SSL_CERT_TYPE_RSA_SIGN 1 +#define MBEDTLS_SSL_CERT_TYPE_ECDSA_SIGN 64 + +/* + * Message, alert and handshake types + */ +#define MBEDTLS_SSL_MSG_CHANGE_CIPHER_SPEC 20 +#define MBEDTLS_SSL_MSG_ALERT 21 +#define MBEDTLS_SSL_MSG_HANDSHAKE 22 +#define MBEDTLS_SSL_MSG_APPLICATION_DATA 23 +#define MBEDTLS_SSL_MSG_CID 25 + +#define MBEDTLS_SSL_ALERT_LEVEL_WARNING 1 +#define MBEDTLS_SSL_ALERT_LEVEL_FATAL 2 + +#define MBEDTLS_SSL_ALERT_MSG_CLOSE_NOTIFY 0 /* 0x00 */ +#define MBEDTLS_SSL_ALERT_MSG_UNEXPECTED_MESSAGE 10 /* 0x0A */ +#define MBEDTLS_SSL_ALERT_MSG_BAD_RECORD_MAC 20 /* 0x14 */ +#define MBEDTLS_SSL_ALERT_MSG_DECRYPTION_FAILED 21 /* 0x15 */ +#define MBEDTLS_SSL_ALERT_MSG_RECORD_OVERFLOW 22 /* 0x16 */ +#define MBEDTLS_SSL_ALERT_MSG_DECOMPRESSION_FAILURE 30 /* 0x1E */ +#define MBEDTLS_SSL_ALERT_MSG_HANDSHAKE_FAILURE 40 /* 0x28 */ +#define MBEDTLS_SSL_ALERT_MSG_NO_CERT 41 /* 0x29 */ +#define MBEDTLS_SSL_ALERT_MSG_BAD_CERT 42 /* 0x2A */ +#define MBEDTLS_SSL_ALERT_MSG_UNSUPPORTED_CERT 43 /* 0x2B */ +#define MBEDTLS_SSL_ALERT_MSG_CERT_REVOKED 44 /* 0x2C */ +#define MBEDTLS_SSL_ALERT_MSG_CERT_EXPIRED 45 /* 0x2D */ +#define MBEDTLS_SSL_ALERT_MSG_CERT_UNKNOWN 46 /* 0x2E */ +#define MBEDTLS_SSL_ALERT_MSG_ILLEGAL_PARAMETER 47 /* 0x2F */ +#define MBEDTLS_SSL_ALERT_MSG_UNKNOWN_CA 48 /* 0x30 */ +#define MBEDTLS_SSL_ALERT_MSG_ACCESS_DENIED 49 /* 0x31 */ +#define MBEDTLS_SSL_ALERT_MSG_DECODE_ERROR 50 /* 0x32 */ +#define MBEDTLS_SSL_ALERT_MSG_DECRYPT_ERROR 51 /* 0x33 */ +#define MBEDTLS_SSL_ALERT_MSG_EXPORT_RESTRICTION 60 /* 0x3C */ +#define MBEDTLS_SSL_ALERT_MSG_PROTOCOL_VERSION 70 /* 0x46 */ +#define MBEDTLS_SSL_ALERT_MSG_INSUFFICIENT_SECURITY 71 /* 0x47 */ +#define MBEDTLS_SSL_ALERT_MSG_INTERNAL_ERROR 80 /* 0x50 */ +#define MBEDTLS_SSL_ALERT_MSG_INAPROPRIATE_FALLBACK 86 /* 0x56 */ +#define MBEDTLS_SSL_ALERT_MSG_USER_CANCELED 90 /* 0x5A */ +#define MBEDTLS_SSL_ALERT_MSG_NO_RENEGOTIATION 100 /* 0x64 */ +#define MBEDTLS_SSL_ALERT_MSG_UNSUPPORTED_EXT 110 /* 0x6E */ +#define MBEDTLS_SSL_ALERT_MSG_UNRECOGNIZED_NAME 112 /* 0x70 */ +#define MBEDTLS_SSL_ALERT_MSG_UNKNOWN_PSK_IDENTITY 115 /* 0x73 */ +#define MBEDTLS_SSL_ALERT_MSG_NO_APPLICATION_PROTOCOL 120 /* 0x78 */ + +#define MBEDTLS_SSL_HS_HELLO_REQUEST 0 +#define MBEDTLS_SSL_HS_CLIENT_HELLO 1 +#define MBEDTLS_SSL_HS_SERVER_HELLO 2 +#define MBEDTLS_SSL_HS_HELLO_VERIFY_REQUEST 3 +#define MBEDTLS_SSL_HS_NEW_SESSION_TICKET 4 +#define MBEDTLS_SSL_HS_CERTIFICATE 11 +#define MBEDTLS_SSL_HS_SERVER_KEY_EXCHANGE 12 +#define MBEDTLS_SSL_HS_CERTIFICATE_REQUEST 13 +#define MBEDTLS_SSL_HS_SERVER_HELLO_DONE 14 +#define MBEDTLS_SSL_HS_CERTIFICATE_VERIFY 15 +#define MBEDTLS_SSL_HS_CLIENT_KEY_EXCHANGE 16 +#define MBEDTLS_SSL_HS_FINISHED 20 + +/* + * TLS extensions + */ +#define MBEDTLS_TLS_EXT_SERVERNAME 0 +#define MBEDTLS_TLS_EXT_SERVERNAME_HOSTNAME 0 + +#define MBEDTLS_TLS_EXT_MAX_FRAGMENT_LENGTH 1 + +#define MBEDTLS_TLS_EXT_TRUNCATED_HMAC 4 + +#define MBEDTLS_TLS_EXT_SUPPORTED_ELLIPTIC_CURVES 10 +#define MBEDTLS_TLS_EXT_SUPPORTED_POINT_FORMATS 11 + +#define MBEDTLS_TLS_EXT_SIG_ALG 13 + +#define MBEDTLS_TLS_EXT_USE_SRTP 14 + +#define MBEDTLS_TLS_EXT_ALPN 16 + +#define MBEDTLS_TLS_EXT_ENCRYPT_THEN_MAC 22 /* 0x16 */ +#define MBEDTLS_TLS_EXT_EXTENDED_MASTER_SECRET 0x0017 /* 23 */ + +#define MBEDTLS_TLS_EXT_SESSION_TICKET 35 + +/* The value of the CID extension is still TBD as of + * draft-ietf-tls-dtls-connection-id-05 + * (https://tools.ietf.org/html/draft-ietf-tls-dtls-connection-id-05) */ +#define MBEDTLS_TLS_EXT_CID 254 /* TBD */ + +#define MBEDTLS_TLS_EXT_ECJPAKE_KKPP 256 /* experimental */ + +#define MBEDTLS_TLS_EXT_RENEGOTIATION_INFO 0xFF01 + +/* + * Size defines + */ +#if !defined(MBEDTLS_PSK_MAX_LEN) +#define MBEDTLS_PSK_MAX_LEN 32 /* 256 bits */ +#endif + +/* Dummy type used only for its size */ +union mbedtls_ssl_premaster_secret +{ +#if defined(MBEDTLS_KEY_EXCHANGE_RSA_ENABLED) + unsigned char _pms_rsa[48]; /* RFC 5246 8.1.1 */ +#endif +#if defined(MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED) + unsigned char _pms_dhm[MBEDTLS_MPI_MAX_SIZE]; /* RFC 5246 8.1.2 */ +#endif +#if defined(MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED) || \ + defined(MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED) || \ + defined(MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED) || \ + defined(MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED) + unsigned char _pms_ecdh[MBEDTLS_ECP_MAX_BYTES]; /* RFC 4492 5.10 */ +#endif +#if defined(MBEDTLS_KEY_EXCHANGE_PSK_ENABLED) + unsigned char _pms_psk[4 + 2 * MBEDTLS_PSK_MAX_LEN]; /* RFC 4279 2 */ +#endif +#if defined(MBEDTLS_KEY_EXCHANGE_DHE_PSK_ENABLED) + unsigned char _pms_dhe_psk[4 + MBEDTLS_MPI_MAX_SIZE + + MBEDTLS_PSK_MAX_LEN]; /* RFC 4279 3 */ +#endif +#if defined(MBEDTLS_KEY_EXCHANGE_RSA_PSK_ENABLED) + unsigned char _pms_rsa_psk[52 + MBEDTLS_PSK_MAX_LEN]; /* RFC 4279 4 */ +#endif +#if defined(MBEDTLS_KEY_EXCHANGE_ECDHE_PSK_ENABLED) + unsigned char _pms_ecdhe_psk[4 + MBEDTLS_ECP_MAX_BYTES + + MBEDTLS_PSK_MAX_LEN]; /* RFC 5489 2 */ +#endif +#if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED) + unsigned char _pms_ecjpake[32]; /* Thread spec: SHA-256 output */ +#endif +}; + +#define MBEDTLS_PREMASTER_SIZE sizeof( union mbedtls_ssl_premaster_secret ) + +#ifdef __cplusplus +extern "C" { +#endif + +/* + * SSL state machine + */ +typedef enum +{ + MBEDTLS_SSL_HELLO_REQUEST, + MBEDTLS_SSL_CLIENT_HELLO, + MBEDTLS_SSL_SERVER_HELLO, + MBEDTLS_SSL_SERVER_CERTIFICATE, + MBEDTLS_SSL_SERVER_KEY_EXCHANGE, + MBEDTLS_SSL_CERTIFICATE_REQUEST, + MBEDTLS_SSL_SERVER_HELLO_DONE, + MBEDTLS_SSL_CLIENT_CERTIFICATE, + MBEDTLS_SSL_CLIENT_KEY_EXCHANGE, + MBEDTLS_SSL_CERTIFICATE_VERIFY, + MBEDTLS_SSL_CLIENT_CHANGE_CIPHER_SPEC, + MBEDTLS_SSL_CLIENT_FINISHED, + MBEDTLS_SSL_SERVER_CHANGE_CIPHER_SPEC, + MBEDTLS_SSL_SERVER_FINISHED, + MBEDTLS_SSL_FLUSH_BUFFERS, + MBEDTLS_SSL_HANDSHAKE_WRAPUP, + MBEDTLS_SSL_HANDSHAKE_OVER, + MBEDTLS_SSL_SERVER_NEW_SESSION_TICKET, + MBEDTLS_SSL_SERVER_HELLO_VERIFY_REQUEST_SENT, +} +mbedtls_ssl_states; + +/* + * The tls_prf function types. + */ +typedef enum +{ + MBEDTLS_SSL_TLS_PRF_NONE, + MBEDTLS_SSL_TLS_PRF_SSL3, + MBEDTLS_SSL_TLS_PRF_TLS1, + MBEDTLS_SSL_TLS_PRF_SHA384, + MBEDTLS_SSL_TLS_PRF_SHA256 +} +mbedtls_tls_prf_types; +/** + * \brief Callback type: send data on the network. + * + * \note That callback may be either blocking or non-blocking. + * + * \param ctx Context for the send callback (typically a file descriptor) + * \param buf Buffer holding the data to send + * \param len Length of the data to send + * + * \return The callback must return the number of bytes sent if any, + * or a non-zero error code. + * If performing non-blocking I/O, \c MBEDTLS_ERR_SSL_WANT_WRITE + * must be returned when the operation would block. + * + * \note The callback is allowed to send fewer bytes than requested. + * It must always return the number of bytes actually sent. + */ +typedef int mbedtls_ssl_send_t( void *ctx, + const unsigned char *buf, + size_t len ); + +/** + * \brief Callback type: receive data from the network. + * + * \note That callback may be either blocking or non-blocking. + * + * \param ctx Context for the receive callback (typically a file + * descriptor) + * \param buf Buffer to write the received data to + * \param len Length of the receive buffer + * + * \return The callback must return the number of bytes received, + * or a non-zero error code. + * If performing non-blocking I/O, \c MBEDTLS_ERR_SSL_WANT_READ + * must be returned when the operation would block. + * + * \note The callback may receive fewer bytes than the length of the + * buffer. It must always return the number of bytes actually + * received and written to the buffer. + */ +typedef int mbedtls_ssl_recv_t( void *ctx, + unsigned char *buf, + size_t len ); + +/** + * \brief Callback type: receive data from the network, with timeout + * + * \note That callback must block until data is received, or the + * timeout delay expires, or the operation is interrupted by a + * signal. + * + * \param ctx Context for the receive callback (typically a file descriptor) + * \param buf Buffer to write the received data to + * \param len Length of the receive buffer + * \param timeout Maximum nomber of millisecondes to wait for data + * 0 means no timeout (potentially waiting forever) + * + * \return The callback must return the number of bytes received, + * or a non-zero error code: + * \c MBEDTLS_ERR_SSL_TIMEOUT if the operation timed out, + * \c MBEDTLS_ERR_SSL_WANT_READ if interrupted by a signal. + * + * \note The callback may receive fewer bytes than the length of the + * buffer. It must always return the number of bytes actually + * received and written to the buffer. + */ +typedef int mbedtls_ssl_recv_timeout_t( void *ctx, + unsigned char *buf, + size_t len, + uint32_t timeout ); +/** + * \brief Callback type: set a pair of timers/delays to watch + * + * \param ctx Context pointer + * \param int_ms Intermediate delay in milliseconds + * \param fin_ms Final delay in milliseconds + * 0 cancels the current timer. + * + * \note This callback must at least store the necessary information + * for the associated \c mbedtls_ssl_get_timer_t callback to + * return correct information. + * + * \note If using a event-driven style of programming, an event must + * be generated when the final delay is passed. The event must + * cause a call to \c mbedtls_ssl_handshake() with the proper + * SSL context to be scheduled. Care must be taken to ensure + * that at most one such call happens at a time. + * + * \note Only one timer at a time must be running. Calling this + * function while a timer is running must cancel it. Cancelled + * timers must not generate any event. + */ +typedef void mbedtls_ssl_set_timer_t( void * ctx, + uint32_t int_ms, + uint32_t fin_ms ); + +/** + * \brief Callback type: get status of timers/delays + * + * \param ctx Context pointer + * + * \return This callback must return: + * -1 if cancelled (fin_ms == 0), + * 0 if none of the delays have passed, + * 1 if only the intermediate delay has passed, + * 2 if the final delay has passed. + */ +typedef int mbedtls_ssl_get_timer_t( void * ctx ); + +/* Defined below */ +typedef struct mbedtls_ssl_session mbedtls_ssl_session; +typedef struct mbedtls_ssl_context mbedtls_ssl_context; +typedef struct mbedtls_ssl_config mbedtls_ssl_config; + +/* Defined in ssl_internal.h */ +typedef struct mbedtls_ssl_transform mbedtls_ssl_transform; +typedef struct mbedtls_ssl_handshake_params mbedtls_ssl_handshake_params; +typedef struct mbedtls_ssl_sig_hash_set_t mbedtls_ssl_sig_hash_set_t; +#if defined(MBEDTLS_X509_CRT_PARSE_C) +typedef struct mbedtls_ssl_key_cert mbedtls_ssl_key_cert; +#endif +#if defined(MBEDTLS_SSL_PROTO_DTLS) +typedef struct mbedtls_ssl_flight_item mbedtls_ssl_flight_item; +#endif + +#if defined(MBEDTLS_SSL_ASYNC_PRIVATE) +#if defined(MBEDTLS_X509_CRT_PARSE_C) +/** + * \brief Callback type: start external signature operation. + * + * This callback is called during an SSL handshake to start + * a signature decryption operation using an + * external processor. The parameter \p cert contains + * the public key; it is up to the callback function to + * determine how to access the associated private key. + * + * This function typically sends or enqueues a request, and + * does not wait for the operation to complete. This allows + * the handshake step to be non-blocking. + * + * The parameters \p ssl and \p cert are guaranteed to remain + * valid throughout the handshake. On the other hand, this + * function must save the contents of \p hash if the value + * is needed for later processing, because the \p hash buffer + * is no longer valid after this function returns. + * + * This function may call mbedtls_ssl_set_async_operation_data() + * to store an operation context for later retrieval + * by the resume or cancel callback. + * + * \note For RSA signatures, this function must produce output + * that is consistent with PKCS#1 v1.5 in the same way as + * mbedtls_rsa_pkcs1_sign(). Before the private key operation, + * apply the padding steps described in RFC 8017, section 9.2 + * "EMSA-PKCS1-v1_5" as follows. + * - If \p md_alg is #MBEDTLS_MD_NONE, apply the PKCS#1 v1.5 + * encoding, treating \p hash as the DigestInfo to be + * padded. In other words, apply EMSA-PKCS1-v1_5 starting + * from step 3, with `T = hash` and `tLen = hash_len`. + * - If `md_alg != MBEDTLS_MD_NONE`, apply the PKCS#1 v1.5 + * encoding, treating \p hash as the hash to be encoded and + * padded. In other words, apply EMSA-PKCS1-v1_5 starting + * from step 2, with `digestAlgorithm` obtained by calling + * mbedtls_oid_get_oid_by_md() on \p md_alg. + * + * \note For ECDSA signatures, the output format is the DER encoding + * `Ecdsa-Sig-Value` defined in + * [RFC 4492 section 5.4](https://tools.ietf.org/html/rfc4492#section-5.4). + * + * \param ssl The SSL connection instance. It should not be + * modified other than via + * mbedtls_ssl_set_async_operation_data(). + * \param cert Certificate containing the public key. + * In simple cases, this is one of the pointers passed to + * mbedtls_ssl_conf_own_cert() when configuring the SSL + * connection. However, if other callbacks are used, this + * property may not hold. For example, if an SNI callback + * is registered with mbedtls_ssl_conf_sni(), then + * this callback determines what certificate is used. + * \param md_alg Hash algorithm. + * \param hash Buffer containing the hash. This buffer is + * no longer valid when the function returns. + * \param hash_len Size of the \c hash buffer in bytes. + * + * \return 0 if the operation was started successfully and the SSL + * stack should call the resume callback immediately. + * \return #MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS if the operation + * was started successfully and the SSL stack should return + * immediately without calling the resume callback yet. + * \return #MBEDTLS_ERR_SSL_HW_ACCEL_FALLTHROUGH if the external + * processor does not support this key. The SSL stack will + * use the private key object instead. + * \return Any other error indicates a fatal failure and is + * propagated up the call chain. The callback should + * use \c MBEDTLS_ERR_PK_xxx error codes, and <b>must not</b> + * use \c MBEDTLS_ERR_SSL_xxx error codes except as + * directed in the documentation of this callback. + */ +typedef int mbedtls_ssl_async_sign_t( mbedtls_ssl_context *ssl, + mbedtls_x509_crt *cert, + mbedtls_md_type_t md_alg, + const unsigned char *hash, + size_t hash_len ); + +/** + * \brief Callback type: start external decryption operation. + * + * This callback is called during an SSL handshake to start + * an RSA decryption operation using an + * external processor. The parameter \p cert contains + * the public key; it is up to the callback function to + * determine how to access the associated private key. + * + * This function typically sends or enqueues a request, and + * does not wait for the operation to complete. This allows + * the handshake step to be non-blocking. + * + * The parameters \p ssl and \p cert are guaranteed to remain + * valid throughout the handshake. On the other hand, this + * function must save the contents of \p input if the value + * is needed for later processing, because the \p input buffer + * is no longer valid after this function returns. + * + * This function may call mbedtls_ssl_set_async_operation_data() + * to store an operation context for later retrieval + * by the resume or cancel callback. + * + * \warning RSA decryption as used in TLS is subject to a potential + * timing side channel attack first discovered by Bleichenbacher + * in 1998. This attack can be remotely exploitable + * in practice. To avoid this attack, you must ensure that + * if the callback performs an RSA decryption, the time it + * takes to execute and return the result does not depend + * on whether the RSA decryption succeeded or reported + * invalid padding. + * + * \param ssl The SSL connection instance. It should not be + * modified other than via + * mbedtls_ssl_set_async_operation_data(). + * \param cert Certificate containing the public key. + * In simple cases, this is one of the pointers passed to + * mbedtls_ssl_conf_own_cert() when configuring the SSL + * connection. However, if other callbacks are used, this + * property may not hold. For example, if an SNI callback + * is registered with mbedtls_ssl_conf_sni(), then + * this callback determines what certificate is used. + * \param input Buffer containing the input ciphertext. This buffer + * is no longer valid when the function returns. + * \param input_len Size of the \p input buffer in bytes. + * + * \return 0 if the operation was started successfully and the SSL + * stack should call the resume callback immediately. + * \return #MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS if the operation + * was started successfully and the SSL stack should return + * immediately without calling the resume callback yet. + * \return #MBEDTLS_ERR_SSL_HW_ACCEL_FALLTHROUGH if the external + * processor does not support this key. The SSL stack will + * use the private key object instead. + * \return Any other error indicates a fatal failure and is + * propagated up the call chain. The callback should + * use \c MBEDTLS_ERR_PK_xxx error codes, and <b>must not</b> + * use \c MBEDTLS_ERR_SSL_xxx error codes except as + * directed in the documentation of this callback. + */ +typedef int mbedtls_ssl_async_decrypt_t( mbedtls_ssl_context *ssl, + mbedtls_x509_crt *cert, + const unsigned char *input, + size_t input_len ); +#endif /* MBEDTLS_X509_CRT_PARSE_C */ + +/** + * \brief Callback type: resume external operation. + * + * This callback is called during an SSL handshake to resume + * an external operation started by the + * ::mbedtls_ssl_async_sign_t or + * ::mbedtls_ssl_async_decrypt_t callback. + * + * This function typically checks the status of a pending + * request or causes the request queue to make progress, and + * does not wait for the operation to complete. This allows + * the handshake step to be non-blocking. + * + * This function may call mbedtls_ssl_get_async_operation_data() + * to retrieve an operation context set by the start callback. + * It may call mbedtls_ssl_set_async_operation_data() to modify + * this context. + * + * Note that when this function returns a status other than + * #MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS, it must free any + * resources associated with the operation. + * + * \param ssl The SSL connection instance. It should not be + * modified other than via + * mbedtls_ssl_set_async_operation_data(). + * \param output Buffer containing the output (signature or decrypted + * data) on success. + * \param output_len On success, number of bytes written to \p output. + * \param output_size Size of the \p output buffer in bytes. + * + * \return 0 if output of the operation is available in the + * \p output buffer. + * \return #MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS if the operation + * is still in progress. Subsequent requests for progress + * on the SSL connection will call the resume callback + * again. + * \return Any other error means that the operation is aborted. + * The SSL handshake is aborted. The callback should + * use \c MBEDTLS_ERR_PK_xxx error codes, and <b>must not</b> + * use \c MBEDTLS_ERR_SSL_xxx error codes except as + * directed in the documentation of this callback. + */ +typedef int mbedtls_ssl_async_resume_t( mbedtls_ssl_context *ssl, + unsigned char *output, + size_t *output_len, + size_t output_size ); + +/** + * \brief Callback type: cancel external operation. + * + * This callback is called if an SSL connection is closed + * while an asynchronous operation is in progress. Note that + * this callback is not called if the + * ::mbedtls_ssl_async_resume_t callback has run and has + * returned a value other than + * #MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS, since in that case + * the asynchronous operation has already completed. + * + * This function may call mbedtls_ssl_get_async_operation_data() + * to retrieve an operation context set by the start callback. + * + * \param ssl The SSL connection instance. It should not be + * modified. + */ +typedef void mbedtls_ssl_async_cancel_t( mbedtls_ssl_context *ssl ); +#endif /* MBEDTLS_SSL_ASYNC_PRIVATE */ + +#if defined(MBEDTLS_KEY_EXCHANGE_WITH_CERT_ENABLED) && \ + !defined(MBEDTLS_SSL_KEEP_PEER_CERTIFICATE) +#define MBEDTLS_SSL_PEER_CERT_DIGEST_MAX_LEN 48 +#if defined(MBEDTLS_SHA256_C) +#define MBEDTLS_SSL_PEER_CERT_DIGEST_DFL_TYPE MBEDTLS_MD_SHA256 +#define MBEDTLS_SSL_PEER_CERT_DIGEST_DFL_LEN 32 +#elif defined(MBEDTLS_SHA512_C) +#define MBEDTLS_SSL_PEER_CERT_DIGEST_DFL_TYPE MBEDTLS_MD_SHA384 +#define MBEDTLS_SSL_PEER_CERT_DIGEST_DFL_LEN 48 +#elif defined(MBEDTLS_SHA1_C) +#define MBEDTLS_SSL_PEER_CERT_DIGEST_DFL_TYPE MBEDTLS_MD_SHA1 +#define MBEDTLS_SSL_PEER_CERT_DIGEST_DFL_LEN 20 +#else +/* This is already checked in check_config.h, but be sure. */ +#error "Bad configuration - need SHA-1, SHA-256 or SHA-512 enabled to compute digest of peer CRT." +#endif +#endif /* MBEDTLS_KEY_EXCHANGE_WITH_CERT_ENABLED && + !MBEDTLS_SSL_KEEP_PEER_CERTIFICATE */ + +#if defined(MBEDTLS_SSL_DTLS_SRTP) + +#define MBEDTLS_TLS_SRTP_MAX_MKI_LENGTH 255 +#define MBEDTLS_TLS_SRTP_MAX_PROFILE_LIST_LENGTH 4 +/* + * For code readability use a typedef for DTLS-SRTP profiles + * + * Use_srtp extension protection profiles values as defined in + * http://www.iana.org/assignments/srtp-protection/srtp-protection.xhtml + * + * Reminder: if this list is expanded mbedtls_ssl_check_srtp_profile_value + * must be updated too. + */ +#define MBEDTLS_TLS_SRTP_AES128_CM_HMAC_SHA1_80 ( (uint16_t) 0x0001) +#define MBEDTLS_TLS_SRTP_AES128_CM_HMAC_SHA1_32 ( (uint16_t) 0x0002) +#define MBEDTLS_TLS_SRTP_NULL_HMAC_SHA1_80 ( (uint16_t) 0x0005) +#define MBEDTLS_TLS_SRTP_NULL_HMAC_SHA1_32 ( (uint16_t) 0x0006) +/* This one is not iana defined, but for code readability. */ +#define MBEDTLS_TLS_SRTP_UNSET ( (uint16_t) 0x0000) + +typedef uint16_t mbedtls_ssl_srtp_profile; + +typedef struct mbedtls_dtls_srtp_info_t +{ + /*! The SRTP profile that was negotiated. */ + mbedtls_ssl_srtp_profile chosen_dtls_srtp_profile; + /*! The length of mki_value. */ + uint16_t mki_len; + /*! The mki_value used, with max size of 256 bytes. */ + unsigned char mki_value[MBEDTLS_TLS_SRTP_MAX_MKI_LENGTH]; +} +mbedtls_dtls_srtp_info; + +#endif /* MBEDTLS_SSL_DTLS_SRTP */ + +/* + * This structure is used for storing current session data. + * + * Note: when changing this definition, we need to check and update: + * - in tests/suites/test_suite_ssl.function: + * ssl_populate_session() and ssl_serialize_session_save_load() + * - in library/ssl_tls.c: + * mbedtls_ssl_session_init() and mbedtls_ssl_session_free() + * mbedtls_ssl_session_save() and ssl_session_load() + * ssl_session_copy() + */ +struct mbedtls_ssl_session +{ +#if defined(MBEDTLS_HAVE_TIME) + mbedtls_time_t start; /*!< starting time */ +#endif + int ciphersuite; /*!< chosen ciphersuite */ + int compression; /*!< chosen compression */ + size_t id_len; /*!< session id length */ + unsigned char id[32]; /*!< session identifier */ + unsigned char master[48]; /*!< the master secret */ + +#if defined(MBEDTLS_X509_CRT_PARSE_C) +#if defined(MBEDTLS_SSL_KEEP_PEER_CERTIFICATE) + mbedtls_x509_crt *peer_cert; /*!< peer X.509 cert chain */ +#else /* MBEDTLS_SSL_KEEP_PEER_CERTIFICATE */ + /*! The digest of the peer's end-CRT. This must be kept to detect CRT + * changes during renegotiation, mitigating the triple handshake attack. */ + unsigned char *peer_cert_digest; + size_t peer_cert_digest_len; + mbedtls_md_type_t peer_cert_digest_type; +#endif /* !MBEDTLS_SSL_KEEP_PEER_CERTIFICATE */ +#endif /* MBEDTLS_X509_CRT_PARSE_C */ + uint32_t verify_result; /*!< verification result */ + +#if defined(MBEDTLS_SSL_SESSION_TICKETS) && defined(MBEDTLS_SSL_CLI_C) + unsigned char *ticket; /*!< RFC 5077 session ticket */ + size_t ticket_len; /*!< session ticket length */ + uint32_t ticket_lifetime; /*!< ticket lifetime hint */ +#endif /* MBEDTLS_SSL_SESSION_TICKETS && MBEDTLS_SSL_CLI_C */ + +#if defined(MBEDTLS_SSL_MAX_FRAGMENT_LENGTH) + unsigned char mfl_code; /*!< MaxFragmentLength negotiated by peer */ +#endif /* MBEDTLS_SSL_MAX_FRAGMENT_LENGTH */ + +#if defined(MBEDTLS_SSL_TRUNCATED_HMAC) + int trunc_hmac; /*!< flag for truncated hmac activation */ +#endif /* MBEDTLS_SSL_TRUNCATED_HMAC */ + +#if defined(MBEDTLS_SSL_ENCRYPT_THEN_MAC) + int encrypt_then_mac; /*!< flag for EtM activation */ +#endif +}; + +/** + * SSL/TLS configuration to be shared between mbedtls_ssl_context structures. + */ +struct mbedtls_ssl_config +{ + /* Group items by size (largest first) to minimize padding overhead */ + + /* + * Pointers + */ + + const int *ciphersuite_list[4]; /*!< allowed ciphersuites per version */ + + /** Callback for printing debug output */ + void (*f_dbg)(void *, int, const char *, int, const char *); + void *p_dbg; /*!< context for the debug function */ + + /** Callback for getting (pseudo-)random numbers */ + int (*f_rng)(void *, unsigned char *, size_t); + void *p_rng; /*!< context for the RNG function */ + + /** Callback to retrieve a session from the cache */ + int (*f_get_cache)(void *, mbedtls_ssl_session *); + /** Callback to store a session into the cache */ + int (*f_set_cache)(void *, const mbedtls_ssl_session *); + void *p_cache; /*!< context for cache callbacks */ + +#if defined(MBEDTLS_SSL_SERVER_NAME_INDICATION) + /** Callback for setting cert according to SNI extension */ + int (*f_sni)(void *, mbedtls_ssl_context *, const unsigned char *, size_t); + void *p_sni; /*!< context for SNI callback */ +#endif + +#if defined(MBEDTLS_X509_CRT_PARSE_C) + /** Callback to customize X.509 certificate chain verification */ + int (*f_vrfy)(void *, mbedtls_x509_crt *, int, uint32_t *); + void *p_vrfy; /*!< context for X.509 verify calllback */ +#endif + +#if defined(MBEDTLS_KEY_EXCHANGE_SOME_PSK_ENABLED) + /** Callback to retrieve PSK key from identity */ + int (*f_psk)(void *, mbedtls_ssl_context *, const unsigned char *, size_t); + void *p_psk; /*!< context for PSK callback */ +#endif + +#if defined(MBEDTLS_SSL_DTLS_HELLO_VERIFY) && defined(MBEDTLS_SSL_SRV_C) + /** Callback to create & write a cookie for ClientHello veirifcation */ + int (*f_cookie_write)( void *, unsigned char **, unsigned char *, + const unsigned char *, size_t ); + /** Callback to verify validity of a ClientHello cookie */ + int (*f_cookie_check)( void *, const unsigned char *, size_t, + const unsigned char *, size_t ); + void *p_cookie; /*!< context for the cookie callbacks */ +#endif + +#if defined(MBEDTLS_SSL_SESSION_TICKETS) && defined(MBEDTLS_SSL_SRV_C) + /** Callback to create & write a session ticket */ + int (*f_ticket_write)( void *, const mbedtls_ssl_session *, + unsigned char *, const unsigned char *, size_t *, uint32_t * ); + /** Callback to parse a session ticket into a session structure */ + int (*f_ticket_parse)( void *, mbedtls_ssl_session *, unsigned char *, size_t); + void *p_ticket; /*!< context for the ticket callbacks */ +#endif /* MBEDTLS_SSL_SESSION_TICKETS && MBEDTLS_SSL_SRV_C */ + +#if defined(MBEDTLS_SSL_EXPORT_KEYS) + /** Callback to export key block and master secret */ + int (*f_export_keys)( void *, const unsigned char *, + const unsigned char *, size_t, size_t, size_t ); + /** Callback to export key block, master secret, + * tls_prf and random bytes. Should replace f_export_keys */ + int (*f_export_keys_ext)( void *, const unsigned char *, + const unsigned char *, size_t, size_t, size_t, + const unsigned char[32], const unsigned char[32], + mbedtls_tls_prf_types ); + void *p_export_keys; /*!< context for key export callback */ +#endif + +#if defined(MBEDTLS_SSL_DTLS_CONNECTION_ID) + size_t cid_len; /*!< The length of CIDs for incoming DTLS records. */ +#endif /* MBEDTLS_SSL_DTLS_CONNECTION_ID */ + +#if defined(MBEDTLS_X509_CRT_PARSE_C) + const mbedtls_x509_crt_profile *cert_profile; /*!< verification profile */ + mbedtls_ssl_key_cert *key_cert; /*!< own certificate/key pair(s) */ + mbedtls_x509_crt *ca_chain; /*!< trusted CAs */ + mbedtls_x509_crl *ca_crl; /*!< trusted CAs CRLs */ +#if defined(MBEDTLS_X509_TRUSTED_CERTIFICATE_CALLBACK) + mbedtls_x509_crt_ca_cb_t f_ca_cb; + void *p_ca_cb; +#endif /* MBEDTLS_X509_TRUSTED_CERTIFICATE_CALLBACK */ +#endif /* MBEDTLS_X509_CRT_PARSE_C */ + +#if defined(MBEDTLS_SSL_ASYNC_PRIVATE) +#if defined(MBEDTLS_X509_CRT_PARSE_C) + mbedtls_ssl_async_sign_t *f_async_sign_start; /*!< start asynchronous signature operation */ + mbedtls_ssl_async_decrypt_t *f_async_decrypt_start; /*!< start asynchronous decryption operation */ +#endif /* MBEDTLS_X509_CRT_PARSE_C */ + mbedtls_ssl_async_resume_t *f_async_resume; /*!< resume asynchronous operation */ + mbedtls_ssl_async_cancel_t *f_async_cancel; /*!< cancel asynchronous operation */ + void *p_async_config_data; /*!< Configuration data set by mbedtls_ssl_conf_async_private_cb(). */ +#endif /* MBEDTLS_SSL_ASYNC_PRIVATE */ + +#if defined(MBEDTLS_KEY_EXCHANGE_WITH_CERT_ENABLED) + const int *sig_hashes; /*!< allowed signature hashes */ +#endif + +#if defined(MBEDTLS_ECP_C) + const mbedtls_ecp_group_id *curve_list; /*!< allowed curves */ +#endif + +#if defined(MBEDTLS_DHM_C) + mbedtls_mpi dhm_P; /*!< prime modulus for DHM */ + mbedtls_mpi dhm_G; /*!< generator for DHM */ +#endif + +#if defined(MBEDTLS_KEY_EXCHANGE_SOME_PSK_ENABLED) + +#if defined(MBEDTLS_USE_PSA_CRYPTO) + psa_key_id_t psk_opaque; /*!< PSA key slot holding opaque PSK. This field + * should only be set via + * mbedtls_ssl_conf_psk_opaque(). + * If either no PSK or a raw PSK have been + * configured, this has value \c 0. + */ +#endif /* MBEDTLS_USE_PSA_CRYPTO */ + + unsigned char *psk; /*!< The raw pre-shared key. This field should + * only be set via mbedtls_ssl_conf_psk(). + * If either no PSK or an opaque PSK + * have been configured, this has value NULL. */ + size_t psk_len; /*!< The length of the raw pre-shared key. + * This field should only be set via + * mbedtls_ssl_conf_psk(). + * Its value is non-zero if and only if + * \c psk is not \c NULL. */ + + unsigned char *psk_identity; /*!< The PSK identity for PSK negotiation. + * This field should only be set via + * mbedtls_ssl_conf_psk(). + * This is set if and only if either + * \c psk or \c psk_opaque are set. */ + size_t psk_identity_len;/*!< The length of PSK identity. + * This field should only be set via + * mbedtls_ssl_conf_psk(). + * Its value is non-zero if and only if + * \c psk is not \c NULL or \c psk_opaque + * is not \c 0. */ +#endif /* MBEDTLS_KEY_EXCHANGE_SOME_PSK_ENABLED */ + +#if defined(MBEDTLS_SSL_ALPN) + const char **alpn_list; /*!< ordered list of protocols */ +#endif + +#if defined(MBEDTLS_SSL_DTLS_SRTP) + /*! ordered list of supported srtp profile */ + const mbedtls_ssl_srtp_profile *dtls_srtp_profile_list; + /*! number of supported profiles */ + size_t dtls_srtp_profile_list_len; +#endif /* MBEDTLS_SSL_DTLS_SRTP */ + + /* + * Numerical settings (int then char) + */ + + uint32_t read_timeout; /*!< timeout for mbedtls_ssl_read (ms) */ + +#if defined(MBEDTLS_SSL_PROTO_DTLS) + uint32_t hs_timeout_min; /*!< initial value of the handshake + retransmission timeout (ms) */ + uint32_t hs_timeout_max; /*!< maximum value of the handshake + retransmission timeout (ms) */ +#endif + +#if defined(MBEDTLS_SSL_RENEGOTIATION) + int renego_max_records; /*!< grace period for renegotiation */ + unsigned char renego_period[8]; /*!< value of the record counters + that triggers renegotiation */ +#endif + +#if defined(MBEDTLS_SSL_DTLS_BADMAC_LIMIT) + unsigned int badmac_limit; /*!< limit of records with a bad MAC */ +#endif + +#if defined(MBEDTLS_DHM_C) && defined(MBEDTLS_SSL_CLI_C) + unsigned int dhm_min_bitlen; /*!< min. bit length of the DHM prime */ +#endif + + unsigned char max_major_ver; /*!< max. major version used */ + unsigned char max_minor_ver; /*!< max. minor version used */ + unsigned char min_major_ver; /*!< min. major version used */ + unsigned char min_minor_ver; /*!< min. minor version used */ + + /* + * Flags (bitfields) + */ + + unsigned int endpoint : 1; /*!< 0: client, 1: server */ + unsigned int transport : 1; /*!< stream (TLS) or datagram (DTLS) */ + unsigned int authmode : 2; /*!< MBEDTLS_SSL_VERIFY_XXX */ + /* needed even with renego disabled for LEGACY_BREAK_HANDSHAKE */ + unsigned int allow_legacy_renegotiation : 2 ; /*!< MBEDTLS_LEGACY_XXX */ +#if defined(MBEDTLS_ARC4_C) + unsigned int arc4_disabled : 1; /*!< blacklist RC4 ciphersuites? */ +#endif +#if defined(MBEDTLS_SSL_MAX_FRAGMENT_LENGTH) + unsigned int mfl_code : 3; /*!< desired fragment length */ +#endif +#if defined(MBEDTLS_SSL_ENCRYPT_THEN_MAC) + unsigned int encrypt_then_mac : 1 ; /*!< negotiate encrypt-then-mac? */ +#endif +#if defined(MBEDTLS_SSL_EXTENDED_MASTER_SECRET) + unsigned int extended_ms : 1; /*!< negotiate extended master secret? */ +#endif +#if defined(MBEDTLS_SSL_DTLS_ANTI_REPLAY) + unsigned int anti_replay : 1; /*!< detect and prevent replay? */ +#endif +#if defined(MBEDTLS_SSL_CBC_RECORD_SPLITTING) + unsigned int cbc_record_splitting : 1; /*!< do cbc record splitting */ +#endif +#if defined(MBEDTLS_SSL_RENEGOTIATION) + unsigned int disable_renegotiation : 1; /*!< disable renegotiation? */ +#endif +#if defined(MBEDTLS_SSL_TRUNCATED_HMAC) + unsigned int trunc_hmac : 1; /*!< negotiate truncated hmac? */ +#endif +#if defined(MBEDTLS_SSL_SESSION_TICKETS) + unsigned int session_tickets : 1; /*!< use session tickets? */ +#endif +#if defined(MBEDTLS_SSL_FALLBACK_SCSV) && defined(MBEDTLS_SSL_CLI_C) + unsigned int fallback : 1; /*!< is this a fallback? */ +#endif +#if defined(MBEDTLS_SSL_SRV_C) + unsigned int cert_req_ca_list : 1; /*!< enable sending CA list in + Certificate Request messages? */ +#endif +#if defined(MBEDTLS_SSL_DTLS_CONNECTION_ID) + unsigned int ignore_unexpected_cid : 1; /*!< Determines whether DTLS + * record with unexpected CID + * should lead to failure. */ +#endif /* MBEDTLS_SSL_DTLS_CONNECTION_ID */ +#if defined(MBEDTLS_SSL_DTLS_SRTP) + unsigned int dtls_srtp_mki_support : 1; /* support having mki_value + in the use_srtp extension */ +#endif +}; + +struct mbedtls_ssl_context +{ + const mbedtls_ssl_config *conf; /*!< configuration information */ + + /* + * Miscellaneous + */ + int state; /*!< SSL handshake: current state */ +#if defined(MBEDTLS_SSL_RENEGOTIATION) + int renego_status; /*!< Initial, in progress, pending? */ + int renego_records_seen; /*!< Records since renego request, or with DTLS, + number of retransmissions of request if + renego_max_records is < 0 */ +#endif /* MBEDTLS_SSL_RENEGOTIATION */ + + int major_ver; /*!< equal to MBEDTLS_SSL_MAJOR_VERSION_3 */ + int minor_ver; /*!< either 0 (SSL3) or 1 (TLS1.0) */ + +#if defined(MBEDTLS_SSL_DTLS_BADMAC_LIMIT) + unsigned badmac_seen; /*!< records with a bad MAC received */ +#endif /* MBEDTLS_SSL_DTLS_BADMAC_LIMIT */ + +#if defined(MBEDTLS_X509_CRT_PARSE_C) + /** Callback to customize X.509 certificate chain verification */ + int (*f_vrfy)(void *, mbedtls_x509_crt *, int, uint32_t *); + void *p_vrfy; /*!< context for X.509 verify callback */ +#endif + + mbedtls_ssl_send_t *f_send; /*!< Callback for network send */ + mbedtls_ssl_recv_t *f_recv; /*!< Callback for network receive */ + mbedtls_ssl_recv_timeout_t *f_recv_timeout; + /*!< Callback for network receive with timeout */ + + void *p_bio; /*!< context for I/O operations */ + + /* + * Session layer + */ + mbedtls_ssl_session *session_in; /*!< current session data (in) */ + mbedtls_ssl_session *session_out; /*!< current session data (out) */ + mbedtls_ssl_session *session; /*!< negotiated session data */ + mbedtls_ssl_session *session_negotiate; /*!< session data in negotiation */ + + mbedtls_ssl_handshake_params *handshake; /*!< params required only during + the handshake process */ + + /* + * Record layer transformations + */ + mbedtls_ssl_transform *transform_in; /*!< current transform params (in) */ + mbedtls_ssl_transform *transform_out; /*!< current transform params (in) */ + mbedtls_ssl_transform *transform; /*!< negotiated transform params */ + mbedtls_ssl_transform *transform_negotiate; /*!< transform params in negotiation */ + + /* + * Timers + */ + void *p_timer; /*!< context for the timer callbacks */ + + mbedtls_ssl_set_timer_t *f_set_timer; /*!< set timer callback */ + mbedtls_ssl_get_timer_t *f_get_timer; /*!< get timer callback */ + + /* + * Record layer (incoming data) + */ + unsigned char *in_buf; /*!< input buffer */ + unsigned char *in_ctr; /*!< 64-bit incoming message counter + TLS: maintained by us + DTLS: read from peer */ + unsigned char *in_hdr; /*!< start of record header */ +#if defined(MBEDTLS_SSL_DTLS_CONNECTION_ID) + unsigned char *in_cid; /*!< The start of the CID; + * (the end is marked by in_len). */ +#endif /* MBEDTLS_SSL_DTLS_CONNECTION_ID */ + unsigned char *in_len; /*!< two-bytes message length field */ + unsigned char *in_iv; /*!< ivlen-byte IV */ + unsigned char *in_msg; /*!< message contents (in_iv+ivlen) */ + unsigned char *in_offt; /*!< read offset in application data */ + + int in_msgtype; /*!< record header: message type */ + size_t in_msglen; /*!< record header: message length */ + size_t in_left; /*!< amount of data read so far */ +#if defined(MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH) + size_t in_buf_len; /*!< length of input buffer */ +#endif +#if defined(MBEDTLS_SSL_PROTO_DTLS) + uint16_t in_epoch; /*!< DTLS epoch for incoming records */ + size_t next_record_offset; /*!< offset of the next record in datagram + (equal to in_left if none) */ +#endif /* MBEDTLS_SSL_PROTO_DTLS */ +#if defined(MBEDTLS_SSL_DTLS_ANTI_REPLAY) + uint64_t in_window_top; /*!< last validated record seq_num */ + uint64_t in_window; /*!< bitmask for replay detection */ +#endif /* MBEDTLS_SSL_DTLS_ANTI_REPLAY */ + + size_t in_hslen; /*!< current handshake message length, + including the handshake header */ + int nb_zero; /*!< # of 0-length encrypted messages */ + + int keep_current_message; /*!< drop or reuse current message + on next call to record layer? */ + +#if defined(MBEDTLS_SSL_PROTO_DTLS) + uint8_t disable_datagram_packing; /*!< Disable packing multiple records + * within a single datagram. */ +#endif /* MBEDTLS_SSL_PROTO_DTLS */ + + /* + * Record layer (outgoing data) + */ + unsigned char *out_buf; /*!< output buffer */ + unsigned char *out_ctr; /*!< 64-bit outgoing message counter */ + unsigned char *out_hdr; /*!< start of record header */ +#if defined(MBEDTLS_SSL_DTLS_CONNECTION_ID) + unsigned char *out_cid; /*!< The start of the CID; + * (the end is marked by in_len). */ +#endif /* MBEDTLS_SSL_DTLS_CONNECTION_ID */ + unsigned char *out_len; /*!< two-bytes message length field */ + unsigned char *out_iv; /*!< ivlen-byte IV */ + unsigned char *out_msg; /*!< message contents (out_iv+ivlen) */ + + int out_msgtype; /*!< record header: message type */ + size_t out_msglen; /*!< record header: message length */ + size_t out_left; /*!< amount of data not yet written */ +#if defined(MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH) + size_t out_buf_len; /*!< length of output buffer */ +#endif + + unsigned char cur_out_ctr[8]; /*!< Outgoing record sequence number. */ + +#if defined(MBEDTLS_SSL_PROTO_DTLS) + uint16_t mtu; /*!< path mtu, used to fragment outgoing messages */ +#endif /* MBEDTLS_SSL_PROTO_DTLS */ + +#if defined(MBEDTLS_ZLIB_SUPPORT) + unsigned char *compress_buf; /*!< zlib data buffer */ +#endif /* MBEDTLS_ZLIB_SUPPORT */ +#if defined(MBEDTLS_SSL_CBC_RECORD_SPLITTING) + signed char split_done; /*!< current record already splitted? */ +#endif /* MBEDTLS_SSL_CBC_RECORD_SPLITTING */ + + /* + * PKI layer + */ + int client_auth; /*!< flag for client auth. */ + + /* + * User settings + */ +#if defined(MBEDTLS_X509_CRT_PARSE_C) + char *hostname; /*!< expected peer CN for verification + (and SNI if available) */ +#endif /* MBEDTLS_X509_CRT_PARSE_C */ + +#if defined(MBEDTLS_SSL_ALPN) + const char *alpn_chosen; /*!< negotiated protocol */ +#endif /* MBEDTLS_SSL_ALPN */ + +#if defined(MBEDTLS_SSL_DTLS_SRTP) + /* + * use_srtp extension + */ + mbedtls_dtls_srtp_info dtls_srtp_info; +#endif /* MBEDTLS_SSL_DTLS_SRTP */ + + /* + * Information for DTLS hello verify + */ +#if defined(MBEDTLS_SSL_DTLS_HELLO_VERIFY) && defined(MBEDTLS_SSL_SRV_C) + unsigned char *cli_id; /*!< transport-level ID of the client */ + size_t cli_id_len; /*!< length of cli_id */ +#endif /* MBEDTLS_SSL_DTLS_HELLO_VERIFY && MBEDTLS_SSL_SRV_C */ + + /* + * Secure renegotiation + */ + /* needed to know when to send extension on server */ + int secure_renegotiation; /*!< does peer support legacy or + secure renegotiation */ +#if defined(MBEDTLS_SSL_RENEGOTIATION) + size_t verify_data_len; /*!< length of verify data stored */ + char own_verify_data[MBEDTLS_SSL_VERIFY_DATA_MAX_LEN]; /*!< previous handshake verify data */ + char peer_verify_data[MBEDTLS_SSL_VERIFY_DATA_MAX_LEN]; /*!< previous handshake verify data */ +#endif /* MBEDTLS_SSL_RENEGOTIATION */ + +#if defined(MBEDTLS_SSL_DTLS_CONNECTION_ID) + /* CID configuration to use in subsequent handshakes. */ + + /*! The next incoming CID, chosen by the user and applying to + * all subsequent handshakes. This may be different from the + * CID currently used in case the user has re-configured the CID + * after an initial handshake. */ + unsigned char own_cid[ MBEDTLS_SSL_CID_IN_LEN_MAX ]; + uint8_t own_cid_len; /*!< The length of \c own_cid. */ + uint8_t negotiate_cid; /*!< This indicates whether the CID extension should + * be negotiated in the next handshake or not. + * Possible values are #MBEDTLS_SSL_CID_ENABLED + * and #MBEDTLS_SSL_CID_DISABLED. */ +#endif /* MBEDTLS_SSL_DTLS_CONNECTION_ID */ +}; + +#if defined(MBEDTLS_SSL_HW_RECORD_ACCEL) + +#if !defined(MBEDTLS_DEPRECATED_REMOVED) + +#define MBEDTLS_SSL_CHANNEL_OUTBOUND MBEDTLS_DEPRECATED_NUMERIC_CONSTANT( 0 ) +#define MBEDTLS_SSL_CHANNEL_INBOUND MBEDTLS_DEPRECATED_NUMERIC_CONSTANT( 1 ) + +#if defined(MBEDTLS_DEPRECATED_WARNING) +#define MBEDTLS_DEPRECATED __attribute__((deprecated)) +#else +#define MBEDTLS_DEPRECATED +#endif /* MBEDTLS_DEPRECATED_WARNING */ + +MBEDTLS_DEPRECATED extern int (*mbedtls_ssl_hw_record_init)( + mbedtls_ssl_context *ssl, + const unsigned char *key_enc, const unsigned char *key_dec, + size_t keylen, + const unsigned char *iv_enc, const unsigned char *iv_dec, + size_t ivlen, + const unsigned char *mac_enc, const unsigned char *mac_dec, + size_t maclen); +MBEDTLS_DEPRECATED extern int (*mbedtls_ssl_hw_record_activate)( + mbedtls_ssl_context *ssl, + int direction ); +MBEDTLS_DEPRECATED extern int (*mbedtls_ssl_hw_record_reset)( + mbedtls_ssl_context *ssl ); +MBEDTLS_DEPRECATED extern int (*mbedtls_ssl_hw_record_write)( + mbedtls_ssl_context *ssl ); +MBEDTLS_DEPRECATED extern int (*mbedtls_ssl_hw_record_read)( + mbedtls_ssl_context *ssl ); +MBEDTLS_DEPRECATED extern int (*mbedtls_ssl_hw_record_finish)( + mbedtls_ssl_context *ssl ); + +#undef MBEDTLS_DEPRECATED +#endif /* !MBEDTLS_DEPRECATED_REMOVED */ + +#endif /* MBEDTLS_SSL_HW_RECORD_ACCEL */ + +/** + * \brief Return the name of the ciphersuite associated with the + * given ID + * + * \param ciphersuite_id SSL ciphersuite ID + * + * \return a string containing the ciphersuite name + */ +const char *mbedtls_ssl_get_ciphersuite_name( const int ciphersuite_id ); + +/** + * \brief Return the ID of the ciphersuite associated with the + * given name + * + * \param ciphersuite_name SSL ciphersuite name + * + * \return the ID with the ciphersuite or 0 if not found + */ +int mbedtls_ssl_get_ciphersuite_id( const char *ciphersuite_name ); + +/** + * \brief Initialize an SSL context + * Just makes the context ready for mbedtls_ssl_setup() or + * mbedtls_ssl_free() + * + * \param ssl SSL context + */ +void mbedtls_ssl_init( mbedtls_ssl_context *ssl ); + +/** + * \brief Set up an SSL context for use + * + * \note No copy of the configuration context is made, it can be + * shared by many mbedtls_ssl_context structures. + * + * \warning The conf structure will be accessed during the session. + * It must not be modified or freed as long as the session + * is active. + * + * \warning This function must be called exactly once per context. + * Calling mbedtls_ssl_setup again is not supported, even + * if no session is active. + * + * \param ssl SSL context + * \param conf SSL configuration to use + * + * \return 0 if successful, or MBEDTLS_ERR_SSL_ALLOC_FAILED if + * memory allocation failed + */ +int mbedtls_ssl_setup( mbedtls_ssl_context *ssl, + const mbedtls_ssl_config *conf ); + +/** + * \brief Reset an already initialized SSL context for re-use + * while retaining application-set variables, function + * pointers and data. + * + * \param ssl SSL context + * \return 0 if successful, or MBEDTLS_ERR_SSL_ALLOC_FAILED, + MBEDTLS_ERR_SSL_HW_ACCEL_FAILED or + * MBEDTLS_ERR_SSL_COMPRESSION_FAILED + */ +int mbedtls_ssl_session_reset( mbedtls_ssl_context *ssl ); + +/** + * \brief Set the current endpoint type + * + * \param conf SSL configuration + * \param endpoint must be MBEDTLS_SSL_IS_CLIENT or MBEDTLS_SSL_IS_SERVER + */ +void mbedtls_ssl_conf_endpoint( mbedtls_ssl_config *conf, int endpoint ); + +/** + * \brief Set the transport type (TLS or DTLS). + * Default: TLS + * + * \note For DTLS, you must either provide a recv callback that + * doesn't block, or one that handles timeouts, see + * \c mbedtls_ssl_set_bio(). You also need to provide timer + * callbacks with \c mbedtls_ssl_set_timer_cb(). + * + * \param conf SSL configuration + * \param transport transport type: + * MBEDTLS_SSL_TRANSPORT_STREAM for TLS, + * MBEDTLS_SSL_TRANSPORT_DATAGRAM for DTLS. + */ +void mbedtls_ssl_conf_transport( mbedtls_ssl_config *conf, int transport ); + +/** + * \brief Set the certificate verification mode + * Default: NONE on server, REQUIRED on client + * + * \param conf SSL configuration + * \param authmode can be: + * + * MBEDTLS_SSL_VERIFY_NONE: peer certificate is not checked + * (default on server) + * (insecure on client) + * + * MBEDTLS_SSL_VERIFY_OPTIONAL: peer certificate is checked, however the + * handshake continues even if verification failed; + * mbedtls_ssl_get_verify_result() can be called after the + * handshake is complete. + * + * MBEDTLS_SSL_VERIFY_REQUIRED: peer *must* present a valid certificate, + * handshake is aborted if verification failed. + * (default on client) + * + * \note On client, MBEDTLS_SSL_VERIFY_REQUIRED is the recommended mode. + * With MBEDTLS_SSL_VERIFY_OPTIONAL, the user needs to call mbedtls_ssl_get_verify_result() at + * the right time(s), which may not be obvious, while REQUIRED always perform + * the verification as soon as possible. For example, REQUIRED was protecting + * against the "triple handshake" attack even before it was found. + */ +void mbedtls_ssl_conf_authmode( mbedtls_ssl_config *conf, int authmode ); + +#if defined(MBEDTLS_X509_CRT_PARSE_C) +/** + * \brief Set the verification callback (Optional). + * + * If set, the provided verify callback is called for each + * certificate in the peer's CRT chain, including the trusted + * root. For more information, please see the documentation of + * \c mbedtls_x509_crt_verify(). + * + * \note For per context callbacks and contexts, please use + * mbedtls_ssl_set_verify() instead. + * + * \param conf The SSL configuration to use. + * \param f_vrfy The verification callback to use during CRT verification. + * \param p_vrfy The opaque context to be passed to the callback. + */ +void mbedtls_ssl_conf_verify( mbedtls_ssl_config *conf, + int (*f_vrfy)(void *, mbedtls_x509_crt *, int, uint32_t *), + void *p_vrfy ); +#endif /* MBEDTLS_X509_CRT_PARSE_C */ + +/** + * \brief Set the random number generator callback + * + * \param conf SSL configuration + * \param f_rng RNG function + * \param p_rng RNG parameter + */ +void mbedtls_ssl_conf_rng( mbedtls_ssl_config *conf, + int (*f_rng)(void *, unsigned char *, size_t), + void *p_rng ); + +/** + * \brief Set the debug callback + * + * The callback has the following argument: + * void * opaque context for the callback + * int debug level + * const char * file name + * int line number + * const char * message + * + * \param conf SSL configuration + * \param f_dbg debug function + * \param p_dbg debug parameter + */ +void mbedtls_ssl_conf_dbg( mbedtls_ssl_config *conf, + void (*f_dbg)(void *, int, const char *, int, const char *), + void *p_dbg ); + +/** + * \brief Set the underlying BIO callbacks for write, read and + * read-with-timeout. + * + * \param ssl SSL context + * \param p_bio parameter (context) shared by BIO callbacks + * \param f_send write callback + * \param f_recv read callback + * \param f_recv_timeout blocking read callback with timeout. + * + * \note One of f_recv or f_recv_timeout can be NULL, in which case + * the other is used. If both are non-NULL, f_recv_timeout is + * used and f_recv is ignored (as if it were NULL). + * + * \note The two most common use cases are: + * - non-blocking I/O, f_recv != NULL, f_recv_timeout == NULL + * - blocking I/O, f_recv == NULL, f_recv_timout != NULL + * + * \note For DTLS, you need to provide either a non-NULL + * f_recv_timeout callback, or a f_recv that doesn't block. + * + * \note See the documentations of \c mbedtls_ssl_send_t, + * \c mbedtls_ssl_recv_t and \c mbedtls_ssl_recv_timeout_t for + * the conventions those callbacks must follow. + * + * \note On some platforms, net_sockets.c provides + * \c mbedtls_net_send(), \c mbedtls_net_recv() and + * \c mbedtls_net_recv_timeout() that are suitable to be used + * here. + */ +void mbedtls_ssl_set_bio( mbedtls_ssl_context *ssl, + void *p_bio, + mbedtls_ssl_send_t *f_send, + mbedtls_ssl_recv_t *f_recv, + mbedtls_ssl_recv_timeout_t *f_recv_timeout ); + +#if defined(MBEDTLS_SSL_PROTO_DTLS) + +#if defined(MBEDTLS_SSL_DTLS_CONNECTION_ID) + + +/** + * \brief Configure the use of the Connection ID (CID) + * extension in the next handshake. + * + * Reference: draft-ietf-tls-dtls-connection-id-05 + * https://tools.ietf.org/html/draft-ietf-tls-dtls-connection-id-05 + * + * The DTLS CID extension allows the reliable association of + * DTLS records to DTLS connections across changes in the + * underlying transport (changed IP and Port metadata) by + * adding explicit connection identifiers (CIDs) to the + * headers of encrypted DTLS records. The desired CIDs are + * configured by the application layer and are exchanged in + * new `ClientHello` / `ServerHello` extensions during the + * handshake, where each side indicates the CID it wants the + * peer to use when writing encrypted messages. The CIDs are + * put to use once records get encrypted: the stack discards + * any incoming records that don't include the configured CID + * in their header, and adds the peer's requested CID to the + * headers of outgoing messages. + * + * This API enables or disables the use of the CID extension + * in the next handshake and sets the value of the CID to + * be used for incoming messages. + * + * \param ssl The SSL context to configure. This must be initialized. + * \param enable This value determines whether the CID extension should + * be used or not. Possible values are: + * - MBEDTLS_SSL_CID_ENABLED to enable the use of the CID. + * - MBEDTLS_SSL_CID_DISABLED (default) to disable the use + * of the CID. + * \param own_cid The address of the readable buffer holding the CID we want + * the peer to use when sending encrypted messages to us. + * This may be \c NULL if \p own_cid_len is \c 0. + * This parameter is unused if \p enabled is set to + * MBEDTLS_SSL_CID_DISABLED. + * \param own_cid_len The length of \p own_cid. + * This parameter is unused if \p enabled is set to + * MBEDTLS_SSL_CID_DISABLED. + * + * \note The value of \p own_cid_len must match the value of the + * \c len parameter passed to mbedtls_ssl_conf_cid() + * when configuring the ::mbedtls_ssl_config that \p ssl + * is bound to. + * + * \note This CID configuration applies to subsequent handshakes + * performed on the SSL context \p ssl, but does not trigger + * one. You still have to call `mbedtls_ssl_handshake()` + * (for the initial handshake) or `mbedtls_ssl_renegotiate()` + * (for a renegotiation handshake) explicitly after a + * successful call to this function to run the handshake. + * + * \note This call cannot guarantee that the use of the CID + * will be successfully negotiated in the next handshake, + * because the peer might not support it. Specifically: + * - On the Client, enabling the use of the CID through + * this call implies that the `ClientHello` in the next + * handshake will include the CID extension, thereby + * offering the use of the CID to the server. Only if + * the `ServerHello` contains the CID extension, too, + * the CID extension will actually be put to use. + * - On the Server, enabling the use of the CID through + * this call implies that that the server will look for + * the CID extension in a `ClientHello` from the client, + * and, if present, reply with a CID extension in its + * `ServerHello`. + * + * \note To check whether the use of the CID was negotiated + * after the subsequent handshake has completed, please + * use the API mbedtls_ssl_get_peer_cid(). + * + * \warning If the use of the CID extension is enabled in this call + * and the subsequent handshake negotiates its use, Mbed TLS + * will silently drop every packet whose CID does not match + * the CID configured in \p own_cid. It is the responsibility + * of the user to adapt the underlying transport to take care + * of CID-based demultiplexing before handing datagrams to + * Mbed TLS. + * + * \return \c 0 on success. In this case, the CID configuration + * applies to the next handshake. + * \return A negative error code on failure. + */ +int mbedtls_ssl_set_cid( mbedtls_ssl_context *ssl, + int enable, + unsigned char const *own_cid, + size_t own_cid_len ); + +/** + * \brief Get information about the use of the CID extension + * in the current connection. + * + * \param ssl The SSL context to query. + * \param enabled The address at which to store whether the CID extension + * is currently in use or not. If the CID is in use, + * `*enabled` is set to MBEDTLS_SSL_CID_ENABLED; + * otherwise, it is set to MBEDTLS_SSL_CID_DISABLED. + * \param peer_cid The address of the buffer in which to store the CID + * chosen by the peer (if the CID extension is used). + * This may be \c NULL in case the value of peer CID + * isn't needed. If it is not \c NULL, \p peer_cid_len + * must not be \c NULL. + * \param peer_cid_len The address at which to store the size of the CID + * chosen by the peer (if the CID extension is used). + * This is also the number of Bytes in \p peer_cid that + * have been written. + * This may be \c NULL in case the length of the peer CID + * isn't needed. If it is \c NULL, \p peer_cid must be + * \c NULL, too. + * + * \note This applies to the state of the CID negotiated in + * the last complete handshake. If a handshake is in + * progress, this function will attempt to complete + * the handshake first. + * + * \note If CID extensions have been exchanged but both client + * and server chose to use an empty CID, this function + * sets `*enabled` to #MBEDTLS_SSL_CID_DISABLED + * (the rationale for this is that the resulting + * communication is the same as if the CID extensions + * hadn't been used). + * + * \return \c 0 on success. + * \return A negative error code on failure. + */ +int mbedtls_ssl_get_peer_cid( mbedtls_ssl_context *ssl, + int *enabled, + unsigned char peer_cid[ MBEDTLS_SSL_CID_OUT_LEN_MAX ], + size_t *peer_cid_len ); + +#endif /* MBEDTLS_SSL_DTLS_CONNECTION_ID */ + +/** + * \brief Set the Maximum Tranport Unit (MTU). + * Special value: 0 means unset (no limit). + * This represents the maximum size of a datagram payload + * handled by the transport layer (usually UDP) as determined + * by the network link and stack. In practice, this controls + * the maximum size datagram the DTLS layer will pass to the + * \c f_send() callback set using \c mbedtls_ssl_set_bio(). + * + * \note The limit on datagram size is converted to a limit on + * record payload by subtracting the current overhead of + * encapsulation and encryption/authentication if any. + * + * \note This can be called at any point during the connection, for + * example when a Path Maximum Transfer Unit (PMTU) + * estimate becomes available from other sources, + * such as lower (or higher) protocol layers. + * + * \note This setting only controls the size of the packets we send, + * and does not restrict the size of the datagrams we're + * willing to receive. Client-side, you can request the + * server to use smaller records with \c + * mbedtls_ssl_conf_max_frag_len(). + * + * \note If both a MTU and a maximum fragment length have been + * configured (or negotiated with the peer), the resulting + * lower limit on record payload (see first note) is used. + * + * \note This can only be used to decrease the maximum size + * of datagrams (hence records, see first note) sent. It + * cannot be used to increase the maximum size of records over + * the limit set by #MBEDTLS_SSL_OUT_CONTENT_LEN. + * + * \note Values lower than the current record layer expansion will + * result in an error when trying to send data. + * + * \note Using record compression together with a non-zero MTU value + * will result in an error when trying to send data. + * + * \param ssl SSL context + * \param mtu Value of the path MTU in bytes + */ +void mbedtls_ssl_set_mtu( mbedtls_ssl_context *ssl, uint16_t mtu ); +#endif /* MBEDTLS_SSL_PROTO_DTLS */ + +#if defined(MBEDTLS_X509_CRT_PARSE_C) +/** + * \brief Set a connection-specific verification callback (optional). + * + * If set, the provided verify callback is called for each + * certificate in the peer's CRT chain, including the trusted + * root. For more information, please see the documentation of + * \c mbedtls_x509_crt_verify(). + * + * \note This call is analogous to mbedtls_ssl_conf_verify() but + * binds the verification callback and context to an SSL context + * as opposed to an SSL configuration. + * If mbedtls_ssl_conf_verify() and mbedtls_ssl_set_verify() + * are both used, mbedtls_ssl_set_verify() takes precedence. + * + * \param ssl The SSL context to use. + * \param f_vrfy The verification callback to use during CRT verification. + * \param p_vrfy The opaque context to be passed to the callback. + */ +void mbedtls_ssl_set_verify( mbedtls_ssl_context *ssl, + int (*f_vrfy)(void *, mbedtls_x509_crt *, int, uint32_t *), + void *p_vrfy ); +#endif /* MBEDTLS_X509_CRT_PARSE_C */ + +/** + * \brief Set the timeout period for mbedtls_ssl_read() + * (Default: no timeout.) + * + * \param conf SSL configuration context + * \param timeout Timeout value in milliseconds. + * Use 0 for no timeout (default). + * + * \note With blocking I/O, this will only work if a non-NULL + * \c f_recv_timeout was set with \c mbedtls_ssl_set_bio(). + * With non-blocking I/O, this will only work if timer + * callbacks were set with \c mbedtls_ssl_set_timer_cb(). + * + * \note With non-blocking I/O, you may also skip this function + * altogether and handle timeouts at the application layer. + */ +void mbedtls_ssl_conf_read_timeout( mbedtls_ssl_config *conf, uint32_t timeout ); + +#if defined(MBEDTLS_SSL_RECORD_CHECKING) +/** + * \brief Check whether a buffer contains a valid and authentic record + * that has not been seen before. (DTLS only). + * + * This function does not change the user-visible state + * of the SSL context. Its sole purpose is to provide + * an indication of the legitimacy of an incoming record. + * + * This can be useful e.g. in distributed server environments + * using the DTLS Connection ID feature, in which connections + * might need to be passed between service instances on a change + * of peer address, but where such disruptive operations should + * only happen after the validity of incoming records has been + * confirmed. + * + * \param ssl The SSL context to use. + * \param buf The address of the buffer holding the record to be checked. + * This must be a read/write buffer of length \p buflen Bytes. + * \param buflen The length of \p buf in Bytes. + * + * \note This routine only checks whether the provided buffer begins + * with a valid and authentic record that has not been seen + * before, but does not check potential data following the + * initial record. In particular, it is possible to pass DTLS + * datagrams containing multiple records, in which case only + * the first record is checked. + * + * \note This function modifies the input buffer \p buf. If you need + * to preserve the original record, you have to maintain a copy. + * + * \return \c 0 if the record is valid and authentic and has not been + * seen before. + * \return MBEDTLS_ERR_SSL_INVALID_MAC if the check completed + * successfully but the record was found to be not authentic. + * \return MBEDTLS_ERR_SSL_INVALID_RECORD if the check completed + * successfully but the record was found to be invalid for + * a reason different from authenticity checking. + * \return MBEDTLS_ERR_SSL_UNEXPECTED_RECORD if the check completed + * successfully but the record was found to be unexpected + * in the state of the SSL context, including replayed records. + * \return Another negative error code on different kinds of failure. + * In this case, the SSL context becomes unusable and needs + * to be freed or reset before reuse. + */ +int mbedtls_ssl_check_record( mbedtls_ssl_context const *ssl, + unsigned char *buf, + size_t buflen ); +#endif /* MBEDTLS_SSL_RECORD_CHECKING */ + +/** + * \brief Set the timer callbacks (Mandatory for DTLS.) + * + * \param ssl SSL context + * \param p_timer parameter (context) shared by timer callbacks + * \param f_set_timer set timer callback + * \param f_get_timer get timer callback. Must return: + * + * \note See the documentation of \c mbedtls_ssl_set_timer_t and + * \c mbedtls_ssl_get_timer_t for the conventions this pair of + * callbacks must follow. + * + * \note On some platforms, timing.c provides + * \c mbedtls_timing_set_delay() and + * \c mbedtls_timing_get_delay() that are suitable for using + * here, except if using an event-driven style. + * + * \note See also the "DTLS tutorial" article in our knowledge base. + * https://tls.mbed.org/kb/how-to/dtls-tutorial + */ +void mbedtls_ssl_set_timer_cb( mbedtls_ssl_context *ssl, + void *p_timer, + mbedtls_ssl_set_timer_t *f_set_timer, + mbedtls_ssl_get_timer_t *f_get_timer ); + +/** + * \brief Callback type: generate and write session ticket + * + * \note This describes what a callback implementation should do. + * This callback should generate an encrypted and + * authenticated ticket for the session and write it to the + * output buffer. Here, ticket means the opaque ticket part + * of the NewSessionTicket structure of RFC 5077. + * + * \param p_ticket Context for the callback + * \param session SSL session to be written in the ticket + * \param start Start of the output buffer + * \param end End of the output buffer + * \param tlen On exit, holds the length written + * \param lifetime On exit, holds the lifetime of the ticket in seconds + * + * \return 0 if successful, or + * a specific MBEDTLS_ERR_XXX code. + */ +typedef int mbedtls_ssl_ticket_write_t( void *p_ticket, + const mbedtls_ssl_session *session, + unsigned char *start, + const unsigned char *end, + size_t *tlen, + uint32_t *lifetime ); + +#if defined(MBEDTLS_SSL_EXPORT_KEYS) +/** + * \brief Callback type: Export key block and master secret + * + * \note This is required for certain uses of TLS, e.g. EAP-TLS + * (RFC 5216) and Thread. The key pointers are ephemeral and + * therefore must not be stored. The master secret and keys + * should not be used directly except as an input to a key + * derivation function. + * + * \param p_expkey Context for the callback + * \param ms Pointer to master secret (fixed length: 48 bytes) + * \param kb Pointer to key block, see RFC 5246 section 6.3 + * (variable length: 2 * maclen + 2 * keylen + 2 * ivlen). + * \param maclen MAC length + * \param keylen Key length + * \param ivlen IV length + * + * \return 0 if successful, or + * a specific MBEDTLS_ERR_XXX code. + */ +typedef int mbedtls_ssl_export_keys_t( void *p_expkey, + const unsigned char *ms, + const unsigned char *kb, + size_t maclen, + size_t keylen, + size_t ivlen ); + +/** + * \brief Callback type: Export key block, master secret, + * handshake randbytes and the tls_prf function + * used to derive keys. + * + * \note This is required for certain uses of TLS, e.g. EAP-TLS + * (RFC 5216) and Thread. The key pointers are ephemeral and + * therefore must not be stored. The master secret and keys + * should not be used directly except as an input to a key + * derivation function. + * + * \param p_expkey Context for the callback. + * \param ms Pointer to master secret (fixed length: 48 bytes). + * \param kb Pointer to key block, see RFC 5246 section 6.3. + * (variable length: 2 * maclen + 2 * keylen + 2 * ivlen). + * \param maclen MAC length. + * \param keylen Key length. + * \param ivlen IV length. + * \param client_random The client random bytes. + * \param server_random The server random bytes. + * \param tls_prf_type The tls_prf enum type. + * + * \return 0 if successful, or + * a specific MBEDTLS_ERR_XXX code. + */ +typedef int mbedtls_ssl_export_keys_ext_t( void *p_expkey, + const unsigned char *ms, + const unsigned char *kb, + size_t maclen, + size_t keylen, + size_t ivlen, + const unsigned char client_random[32], + const unsigned char server_random[32], + mbedtls_tls_prf_types tls_prf_type ); +#endif /* MBEDTLS_SSL_EXPORT_KEYS */ + +/** + * \brief Callback type: parse and load session ticket + * + * \note This describes what a callback implementation should do. + * This callback should parse a session ticket as generated + * by the corresponding mbedtls_ssl_ticket_write_t function, + * and, if the ticket is authentic and valid, load the + * session. + * + * \note The implementation is allowed to modify the first len + * bytes of the input buffer, eg to use it as a temporary + * area for the decrypted ticket contents. + * + * \param p_ticket Context for the callback + * \param session SSL session to be loaded + * \param buf Start of the buffer containing the ticket + * \param len Length of the ticket. + * + * \return 0 if successful, or + * MBEDTLS_ERR_SSL_INVALID_MAC if not authentic, or + * MBEDTLS_ERR_SSL_SESSION_TICKET_EXPIRED if expired, or + * any other non-zero code for other failures. + */ +typedef int mbedtls_ssl_ticket_parse_t( void *p_ticket, + mbedtls_ssl_session *session, + unsigned char *buf, + size_t len ); + +#if defined(MBEDTLS_SSL_SESSION_TICKETS) && defined(MBEDTLS_SSL_SRV_C) +/** + * \brief Configure SSL session ticket callbacks (server only). + * (Default: none.) + * + * \note On server, session tickets are enabled by providing + * non-NULL callbacks. + * + * \note On client, use \c mbedtls_ssl_conf_session_tickets(). + * + * \param conf SSL configuration context + * \param f_ticket_write Callback for writing a ticket + * \param f_ticket_parse Callback for parsing a ticket + * \param p_ticket Context shared by the two callbacks + */ +void mbedtls_ssl_conf_session_tickets_cb( mbedtls_ssl_config *conf, + mbedtls_ssl_ticket_write_t *f_ticket_write, + mbedtls_ssl_ticket_parse_t *f_ticket_parse, + void *p_ticket ); +#endif /* MBEDTLS_SSL_SESSION_TICKETS && MBEDTLS_SSL_SRV_C */ + +#if defined(MBEDTLS_SSL_EXPORT_KEYS) +/** + * \brief Configure key export callback. + * (Default: none.) + * + * \note See \c mbedtls_ssl_export_keys_t. + * + * \param conf SSL configuration context + * \param f_export_keys Callback for exporting keys + * \param p_export_keys Context for the callback + */ +void mbedtls_ssl_conf_export_keys_cb( mbedtls_ssl_config *conf, + mbedtls_ssl_export_keys_t *f_export_keys, + void *p_export_keys ); + +/** + * \brief Configure extended key export callback. + * (Default: none.) + * + * \note See \c mbedtls_ssl_export_keys_ext_t. + * \warning Exported key material must not be used for any purpose + * before the (D)TLS handshake is completed + * + * \param conf SSL configuration context + * \param f_export_keys_ext Callback for exporting keys + * \param p_export_keys Context for the callback + */ +void mbedtls_ssl_conf_export_keys_ext_cb( mbedtls_ssl_config *conf, + mbedtls_ssl_export_keys_ext_t *f_export_keys_ext, + void *p_export_keys ); +#endif /* MBEDTLS_SSL_EXPORT_KEYS */ + +#if defined(MBEDTLS_SSL_ASYNC_PRIVATE) +/** + * \brief Configure asynchronous private key operation callbacks. + * + * \param conf SSL configuration context + * \param f_async_sign Callback to start a signature operation. See + * the description of ::mbedtls_ssl_async_sign_t + * for more information. This may be \c NULL if the + * external processor does not support any signature + * operation; in this case the private key object + * associated with the certificate will be used. + * \param f_async_decrypt Callback to start a decryption operation. See + * the description of ::mbedtls_ssl_async_decrypt_t + * for more information. This may be \c NULL if the + * external processor does not support any decryption + * operation; in this case the private key object + * associated with the certificate will be used. + * \param f_async_resume Callback to resume an asynchronous operation. See + * the description of ::mbedtls_ssl_async_resume_t + * for more information. This may not be \c NULL unless + * \p f_async_sign and \p f_async_decrypt are both + * \c NULL. + * \param f_async_cancel Callback to cancel an asynchronous operation. See + * the description of ::mbedtls_ssl_async_cancel_t + * for more information. This may be \c NULL if + * no cleanup is needed. + * \param config_data A pointer to configuration data which can be + * retrieved with + * mbedtls_ssl_conf_get_async_config_data(). The + * library stores this value without dereferencing it. + */ +void mbedtls_ssl_conf_async_private_cb( mbedtls_ssl_config *conf, + mbedtls_ssl_async_sign_t *f_async_sign, + mbedtls_ssl_async_decrypt_t *f_async_decrypt, + mbedtls_ssl_async_resume_t *f_async_resume, + mbedtls_ssl_async_cancel_t *f_async_cancel, + void *config_data ); + +/** + * \brief Retrieve the configuration data set by + * mbedtls_ssl_conf_async_private_cb(). + * + * \param conf SSL configuration context + * \return The configuration data set by + * mbedtls_ssl_conf_async_private_cb(). + */ +void *mbedtls_ssl_conf_get_async_config_data( const mbedtls_ssl_config *conf ); + +/** + * \brief Retrieve the asynchronous operation user context. + * + * \note This function may only be called while a handshake + * is in progress. + * + * \param ssl The SSL context to access. + * + * \return The asynchronous operation user context that was last + * set during the current handshake. If + * mbedtls_ssl_set_async_operation_data() has not yet been + * called during the current handshake, this function returns + * \c NULL. + */ +void *mbedtls_ssl_get_async_operation_data( const mbedtls_ssl_context *ssl ); + +/** + * \brief Retrieve the asynchronous operation user context. + * + * \note This function may only be called while a handshake + * is in progress. + * + * \param ssl The SSL context to access. + * \param ctx The new value of the asynchronous operation user context. + * Call mbedtls_ssl_get_async_operation_data() later during the + * same handshake to retrieve this value. + */ +void mbedtls_ssl_set_async_operation_data( mbedtls_ssl_context *ssl, + void *ctx ); +#endif /* MBEDTLS_SSL_ASYNC_PRIVATE */ + +/** + * \brief Callback type: generate a cookie + * + * \param ctx Context for the callback + * \param p Buffer to write to, + * must be updated to point right after the cookie + * \param end Pointer to one past the end of the output buffer + * \param info Client ID info that was passed to + * \c mbedtls_ssl_set_client_transport_id() + * \param ilen Length of info in bytes + * + * \return The callback must return 0 on success, + * or a negative error code. + */ +typedef int mbedtls_ssl_cookie_write_t( void *ctx, + unsigned char **p, unsigned char *end, + const unsigned char *info, size_t ilen ); + +/** + * \brief Callback type: verify a cookie + * + * \param ctx Context for the callback + * \param cookie Cookie to verify + * \param clen Length of cookie + * \param info Client ID info that was passed to + * \c mbedtls_ssl_set_client_transport_id() + * \param ilen Length of info in bytes + * + * \return The callback must return 0 if cookie is valid, + * or a negative error code. + */ +typedef int mbedtls_ssl_cookie_check_t( void *ctx, + const unsigned char *cookie, size_t clen, + const unsigned char *info, size_t ilen ); + +#if defined(MBEDTLS_SSL_DTLS_HELLO_VERIFY) && defined(MBEDTLS_SSL_SRV_C) +/** + * \brief Register callbacks for DTLS cookies + * (Server only. DTLS only.) + * + * Default: dummy callbacks that fail, in order to force you to + * register working callbacks (and initialize their context). + * + * To disable HelloVerifyRequest, register NULL callbacks. + * + * \warning Disabling hello verification allows your server to be used + * for amplification in DoS attacks against other hosts. + * Only disable if you known this can't happen in your + * particular environment. + * + * \note See comments on \c mbedtls_ssl_handshake() about handling + * the MBEDTLS_ERR_SSL_HELLO_VERIFY_REQUIRED that is expected + * on the first handshake attempt when this is enabled. + * + * \note This is also necessary to handle client reconnection from + * the same port as described in RFC 6347 section 4.2.8 (only + * the variant with cookies is supported currently). See + * comments on \c mbedtls_ssl_read() for details. + * + * \param conf SSL configuration + * \param f_cookie_write Cookie write callback + * \param f_cookie_check Cookie check callback + * \param p_cookie Context for both callbacks + */ +void mbedtls_ssl_conf_dtls_cookies( mbedtls_ssl_config *conf, + mbedtls_ssl_cookie_write_t *f_cookie_write, + mbedtls_ssl_cookie_check_t *f_cookie_check, + void *p_cookie ); + +/** + * \brief Set client's transport-level identification info. + * (Server only. DTLS only.) + * + * This is usually the IP address (and port), but could be + * anything identify the client depending on the underlying + * network stack. Used for HelloVerifyRequest with DTLS. + * This is *not* used to route the actual packets. + * + * \param ssl SSL context + * \param info Transport-level info identifying the client (eg IP + port) + * \param ilen Length of info in bytes + * + * \note An internal copy is made, so the info buffer can be reused. + * + * \return 0 on success, + * MBEDTLS_ERR_SSL_BAD_INPUT_DATA if used on client, + * MBEDTLS_ERR_SSL_ALLOC_FAILED if out of memory. + */ +int mbedtls_ssl_set_client_transport_id( mbedtls_ssl_context *ssl, + const unsigned char *info, + size_t ilen ); + +#endif /* MBEDTLS_SSL_DTLS_HELLO_VERIFY && MBEDTLS_SSL_SRV_C */ + +#if defined(MBEDTLS_SSL_DTLS_ANTI_REPLAY) +/** + * \brief Enable or disable anti-replay protection for DTLS. + * (DTLS only, no effect on TLS.) + * Default: enabled. + * + * \param conf SSL configuration + * \param mode MBEDTLS_SSL_ANTI_REPLAY_ENABLED or MBEDTLS_SSL_ANTI_REPLAY_DISABLED. + * + * \warning Disabling this is a security risk unless the application + * protocol handles duplicated packets in a safe way. You + * should not disable this without careful consideration. + * However, if your application already detects duplicated + * packets and needs information about them to adjust its + * transmission strategy, then you'll want to disable this. + */ +void mbedtls_ssl_conf_dtls_anti_replay( mbedtls_ssl_config *conf, char mode ); +#endif /* MBEDTLS_SSL_DTLS_ANTI_REPLAY */ + +#if defined(MBEDTLS_SSL_DTLS_BADMAC_LIMIT) +/** + * \brief Set a limit on the number of records with a bad MAC + * before terminating the connection. + * (DTLS only, no effect on TLS.) + * Default: 0 (disabled). + * + * \param conf SSL configuration + * \param limit Limit, or 0 to disable. + * + * \note If the limit is N, then the connection is terminated when + * the Nth non-authentic record is seen. + * + * \note Records with an invalid header are not counted, only the + * ones going through the authentication-decryption phase. + * + * \note This is a security trade-off related to the fact that it's + * often relatively easy for an active attacker ot inject UDP + * datagrams. On one hand, setting a low limit here makes it + * easier for such an attacker to forcibly terminated a + * connection. On the other hand, a high limit or no limit + * might make us waste resources checking authentication on + * many bogus packets. + */ +void mbedtls_ssl_conf_dtls_badmac_limit( mbedtls_ssl_config *conf, unsigned limit ); +#endif /* MBEDTLS_SSL_DTLS_BADMAC_LIMIT */ + +#if defined(MBEDTLS_SSL_PROTO_DTLS) + +/** + * \brief Allow or disallow packing of multiple handshake records + * within a single datagram. + * + * \param ssl The SSL context to configure. + * \param allow_packing This determines whether datagram packing may + * be used or not. A value of \c 0 means that every + * record will be sent in a separate datagram; a + * value of \c 1 means that, if space permits, + * multiple handshake messages (including CCS) belonging to + * a single flight may be packed within a single datagram. + * + * \note This is enabled by default and should only be disabled + * for test purposes, or if datagram packing causes + * interoperability issues with peers that don't support it. + * + * \note Allowing datagram packing reduces the network load since + * there's less overhead if multiple messages share the same + * datagram. Also, it increases the handshake efficiency + * since messages belonging to a single datagram will not + * be reordered in transit, and so future message buffering + * or flight retransmission (if no buffering is used) as + * means to deal with reordering are needed less frequently. + * + * \note Application records are not affected by this option and + * are currently always sent in separate datagrams. + * + */ +void mbedtls_ssl_set_datagram_packing( mbedtls_ssl_context *ssl, + unsigned allow_packing ); + +/** + * \brief Set retransmit timeout values for the DTLS handshake. + * (DTLS only, no effect on TLS.) + * + * \param conf SSL configuration + * \param min Initial timeout value in milliseconds. + * Default: 1000 (1 second). + * \param max Maximum timeout value in milliseconds. + * Default: 60000 (60 seconds). + * + * \note Default values are from RFC 6347 section 4.2.4.1. + * + * \note The 'min' value should typically be slightly above the + * expected round-trip time to your peer, plus whatever time + * it takes for the peer to process the message. For example, + * if your RTT is about 600ms and you peer needs up to 1s to + * do the cryptographic operations in the handshake, then you + * should set 'min' slightly above 1600. Lower values of 'min' + * might cause spurious resends which waste network resources, + * while larger value of 'min' will increase overall latency + * on unreliable network links. + * + * \note The more unreliable your network connection is, the larger + * your max / min ratio needs to be in order to achieve + * reliable handshakes. + * + * \note Messages are retransmitted up to log2(ceil(max/min)) times. + * For example, if min = 1s and max = 5s, the retransmit plan + * goes: send ... 1s -> resend ... 2s -> resend ... 4s -> + * resend ... 5s -> give up and return a timeout error. + */ +void mbedtls_ssl_conf_handshake_timeout( mbedtls_ssl_config *conf, uint32_t min, uint32_t max ); +#endif /* MBEDTLS_SSL_PROTO_DTLS */ + +#if defined(MBEDTLS_SSL_SRV_C) +/** + * \brief Set the session cache callbacks (server-side only) + * If not set, no session resuming is done (except if session + * tickets are enabled too). + * + * The session cache has the responsibility to check for stale + * entries based on timeout. See RFC 5246 for recommendations. + * + * Warning: session.peer_cert is cleared by the SSL/TLS layer on + * connection shutdown, so do not cache the pointer! Either set + * it to NULL or make a full copy of the certificate. + * + * The get callback is called once during the initial handshake + * to enable session resuming. The get function has the + * following parameters: (void *parameter, mbedtls_ssl_session *session) + * If a valid entry is found, it should fill the master of + * the session object with the cached values and return 0, + * return 1 otherwise. Optionally peer_cert can be set as well + * if it is properly present in cache entry. + * + * The set callback is called once during the initial handshake + * to enable session resuming after the entire handshake has + * been finished. The set function has the following parameters: + * (void *parameter, const mbedtls_ssl_session *session). The function + * should create a cache entry for future retrieval based on + * the data in the session structure and should keep in mind + * that the mbedtls_ssl_session object presented (and all its referenced + * data) is cleared by the SSL/TLS layer when the connection is + * terminated. It is recommended to add metadata to determine if + * an entry is still valid in the future. Return 0 if + * successfully cached, return 1 otherwise. + * + * \param conf SSL configuration + * \param p_cache parmater (context) for both callbacks + * \param f_get_cache session get callback + * \param f_set_cache session set callback + */ +void mbedtls_ssl_conf_session_cache( mbedtls_ssl_config *conf, + void *p_cache, + int (*f_get_cache)(void *, mbedtls_ssl_session *), + int (*f_set_cache)(void *, const mbedtls_ssl_session *) ); +#endif /* MBEDTLS_SSL_SRV_C */ + +#if defined(MBEDTLS_SSL_CLI_C) +/** + * \brief Request resumption of session (client-side only) + * Session data is copied from presented session structure. + * + * \param ssl SSL context + * \param session session context + * + * \return 0 if successful, + * MBEDTLS_ERR_SSL_ALLOC_FAILED if memory allocation failed, + * MBEDTLS_ERR_SSL_BAD_INPUT_DATA if used server-side or + * arguments are otherwise invalid + * + * \sa mbedtls_ssl_get_session() + */ +int mbedtls_ssl_set_session( mbedtls_ssl_context *ssl, const mbedtls_ssl_session *session ); +#endif /* MBEDTLS_SSL_CLI_C */ + +/** + * \brief Load serialized session data into a session structure. + * On client, this can be used for loading saved sessions + * before resuming them with mbedstls_ssl_set_session(). + * On server, this can be used for alternative implementations + * of session cache or session tickets. + * + * \warning If a peer certificate chain is associated with the session, + * the serialized state will only contain the peer's + * end-entity certificate and the result of the chain + * verification (unless verification was disabled), but not + * the rest of the chain. + * + * \see mbedtls_ssl_session_save() + * \see mbedtls_ssl_set_session() + * + * \param session The session structure to be populated. It must have been + * initialised with mbedtls_ssl_session_init() but not + * populated yet. + * \param buf The buffer holding the serialized session data. It must be a + * readable buffer of at least \p len bytes. + * \param len The size of the serialized data in bytes. + * + * \return \c 0 if successful. + * \return #MBEDTLS_ERR_SSL_ALLOC_FAILED if memory allocation failed. + * \return #MBEDTLS_ERR_SSL_BAD_INPUT_DATA if input data is invalid. + * \return #MBEDTLS_ERR_SSL_VERSION_MISMATCH if the serialized data + * was generated in a different version or configuration of + * Mbed TLS. + * \return Another negative value for other kinds of errors (for + * example, unsupported features in the embedded certificate). + */ +int mbedtls_ssl_session_load( mbedtls_ssl_session *session, + const unsigned char *buf, + size_t len ); + +/** + * \brief Save session structure as serialized data in a buffer. + * On client, this can be used for saving session data, + * potentially in non-volatile storage, for resuming later. + * On server, this can be used for alternative implementations + * of session cache or session tickets. + * + * \see mbedtls_ssl_session_load() + * \see mbedtls_ssl_get_session_pointer() + * + * \param session The session structure to be saved. + * \param buf The buffer to write the serialized data to. It must be a + * writeable buffer of at least \p len bytes, or may be \c + * NULL if \p len is \c 0. + * \param buf_len The number of bytes available for writing in \p buf. + * \param olen The size in bytes of the data that has been or would have + * been written. It must point to a valid \c size_t. + * + * \note \p olen is updated to the correct value regardless of + * whether \p buf_len was large enough. This makes it possible + * to determine the necessary size by calling this function + * with \p buf set to \c NULL and \p buf_len to \c 0. + * + * \return \c 0 if successful. + * \return #MBEDTLS_ERR_SSL_BUFFER_TOO_SMALL if \p buf is too small. + */ +int mbedtls_ssl_session_save( const mbedtls_ssl_session *session, + unsigned char *buf, + size_t buf_len, + size_t *olen ); + +/** + * \brief Get a pointer to the current session structure, for example + * to serialize it. + * + * \warning Ownership of the session remains with the SSL context, and + * the returned pointer is only guaranteed to be valid until + * the next API call operating on the same \p ssl context. + * + * \see mbedtls_ssl_session_save() + * + * \param ssl The SSL context. + * + * \return A pointer to the current session if successful. + * \return \c NULL if no session is active. + */ +const mbedtls_ssl_session *mbedtls_ssl_get_session_pointer( const mbedtls_ssl_context *ssl ); + +/** + * \brief Set the list of allowed ciphersuites and the preference + * order. First in the list has the highest preference. + * (Overrides all version-specific lists) + * + * The ciphersuites array is not copied, and must remain + * valid for the lifetime of the ssl_config. + * + * Note: The server uses its own preferences + * over the preference of the client unless + * MBEDTLS_SSL_SRV_RESPECT_CLIENT_PREFERENCE is defined! + * + * \param conf SSL configuration + * \param ciphersuites 0-terminated list of allowed ciphersuites + */ +void mbedtls_ssl_conf_ciphersuites( mbedtls_ssl_config *conf, + const int *ciphersuites ); + +#if defined(MBEDTLS_SSL_DTLS_CONNECTION_ID) +#define MBEDTLS_SSL_UNEXPECTED_CID_IGNORE 0 +#define MBEDTLS_SSL_UNEXPECTED_CID_FAIL 1 +/** + * \brief Specify the length of Connection IDs for incoming + * encrypted DTLS records, as well as the behaviour + * on unexpected CIDs. + * + * By default, the CID length is set to \c 0, + * and unexpected CIDs are silently ignored. + * + * \param conf The SSL configuration to modify. + * \param len The length in Bytes of the CID fields in encrypted + * DTLS records using the CID mechanism. This must + * not be larger than #MBEDTLS_SSL_CID_OUT_LEN_MAX. + * \param ignore_other_cids This determines the stack's behaviour when + * receiving a record with an unexpected CID. + * Possible values are: + * - #MBEDTLS_SSL_UNEXPECTED_CID_IGNORE + * In this case, the record is silently ignored. + * - #MBEDTLS_SSL_UNEXPECTED_CID_FAIL + * In this case, the stack fails with the specific + * error code #MBEDTLS_ERR_SSL_UNEXPECTED_CID. + * + * \note The CID specification allows implementations to either + * use a common length for all incoming connection IDs or + * allow variable-length incoming IDs. Mbed TLS currently + * requires a common length for all connections sharing the + * same SSL configuration; this allows simpler parsing of + * record headers. + * + * \return \c 0 on success. + * \return #MBEDTLS_ERR_SSL_BAD_INPUT_DATA if \p own_cid_len + * is too large. + */ +int mbedtls_ssl_conf_cid( mbedtls_ssl_config *conf, size_t len, + int ignore_other_cids ); +#endif /* MBEDTLS_SSL_DTLS_CONNECTION_ID */ + +/** + * \brief Set the list of allowed ciphersuites and the + * preference order for a specific version of the protocol. + * (Only useful on the server side) + * + * The ciphersuites array is not copied, and must remain + * valid for the lifetime of the ssl_config. + * + * \param conf SSL configuration + * \param ciphersuites 0-terminated list of allowed ciphersuites + * \param major Major version number (only MBEDTLS_SSL_MAJOR_VERSION_3 + * supported) + * \param minor Minor version number (MBEDTLS_SSL_MINOR_VERSION_0, + * MBEDTLS_SSL_MINOR_VERSION_1 and MBEDTLS_SSL_MINOR_VERSION_2, + * MBEDTLS_SSL_MINOR_VERSION_3 supported) + * + * \note With DTLS, use MBEDTLS_SSL_MINOR_VERSION_2 for DTLS 1.0 + * and MBEDTLS_SSL_MINOR_VERSION_3 for DTLS 1.2 + */ +void mbedtls_ssl_conf_ciphersuites_for_version( mbedtls_ssl_config *conf, + const int *ciphersuites, + int major, int minor ); + +#if defined(MBEDTLS_X509_CRT_PARSE_C) +/** + * \brief Set the X.509 security profile used for verification + * + * \note The restrictions are enforced for all certificates in the + * chain. However, signatures in the handshake are not covered + * by this setting but by \b mbedtls_ssl_conf_sig_hashes(). + * + * \param conf SSL configuration + * \param profile Profile to use + */ +void mbedtls_ssl_conf_cert_profile( mbedtls_ssl_config *conf, + const mbedtls_x509_crt_profile *profile ); + +/** + * \brief Set the data required to verify peer certificate + * + * \note See \c mbedtls_x509_crt_verify() for notes regarding the + * parameters ca_chain (maps to trust_ca for that function) + * and ca_crl. + * + * \param conf SSL configuration + * \param ca_chain trusted CA chain (meaning all fully trusted top-level CAs) + * \param ca_crl trusted CA CRLs + */ +void mbedtls_ssl_conf_ca_chain( mbedtls_ssl_config *conf, + mbedtls_x509_crt *ca_chain, + mbedtls_x509_crl *ca_crl ); + +#if defined(MBEDTLS_X509_TRUSTED_CERTIFICATE_CALLBACK) +/** + * \brief Set the trusted certificate callback. + * + * This API allows to register the set of trusted certificates + * through a callback, instead of a linked list as configured + * by mbedtls_ssl_conf_ca_chain(). + * + * This is useful for example in contexts where a large number + * of CAs are used, and the inefficiency of maintaining them + * in a linked list cannot be tolerated. It is also useful when + * the set of trusted CAs needs to be modified frequently. + * + * See the documentation of `mbedtls_x509_crt_ca_cb_t` for + * more information. + * + * \param conf The SSL configuration to register the callback with. + * \param f_ca_cb The trusted certificate callback to use when verifying + * certificate chains. + * \param p_ca_cb The context to be passed to \p f_ca_cb (for example, + * a reference to a trusted CA database). + * + * \note This API is incompatible with mbedtls_ssl_conf_ca_chain(): + * Any call to this function overwrites the values set through + * earlier calls to mbedtls_ssl_conf_ca_chain() or + * mbedtls_ssl_conf_ca_cb(). + * + * \note This API is incompatible with CA indication in + * CertificateRequest messages: A server-side SSL context which + * is bound to an SSL configuration that uses a CA callback + * configured via mbedtls_ssl_conf_ca_cb(), and which requires + * client authentication, will send an empty CA list in the + * corresponding CertificateRequest message. + * + * \note This API is incompatible with mbedtls_ssl_set_hs_ca_chain(): + * If an SSL context is bound to an SSL configuration which uses + * CA callbacks configured via mbedtls_ssl_conf_ca_cb(), then + * calls to mbedtls_ssl_set_hs_ca_chain() have no effect. + * + * \note The use of this API disables the use of restartable ECC + * during X.509 CRT signature verification (but doesn't affect + * other uses). + * + * \warning This API is incompatible with the use of CRLs. Any call to + * mbedtls_ssl_conf_ca_cb() unsets CRLs configured through + * earlier calls to mbedtls_ssl_conf_ca_chain(). + * + * \warning In multi-threaded environments, the callback \p f_ca_cb + * must be thread-safe, and it is the user's responsibility + * to guarantee this (for example through a mutex + * contained in the callback context pointed to by \p p_ca_cb). + */ +void mbedtls_ssl_conf_ca_cb( mbedtls_ssl_config *conf, + mbedtls_x509_crt_ca_cb_t f_ca_cb, + void *p_ca_cb ); +#endif /* MBEDTLS_X509_TRUSTED_CERTIFICATE_CALLBACK */ + +/** + * \brief Set own certificate chain and private key + * + * \note own_cert should contain in order from the bottom up your + * certificate chain. The top certificate (self-signed) + * can be omitted. + * + * \note On server, this function can be called multiple times to + * provision more than one cert/key pair (eg one ECDSA, one + * RSA with SHA-256, one RSA with SHA-1). An adequate + * certificate will be selected according to the client's + * advertised capabilities. In case multiple certificates are + * adequate, preference is given to the one set by the first + * call to this function, then second, etc. + * + * \note On client, only the first call has any effect. That is, + * only one client certificate can be provisioned. The + * server's preferences in its CertficateRequest message will + * be ignored and our only cert will be sent regardless of + * whether it matches those preferences - the server can then + * decide what it wants to do with it. + * + * \note The provided \p pk_key needs to match the public key in the + * first certificate in \p own_cert, or all handshakes using + * that certificate will fail. It is your responsibility + * to ensure that; this function will not perform any check. + * You may use mbedtls_pk_check_pair() in order to perform + * this check yourself, but be aware that this function can + * be computationally expensive on some key types. + * + * \param conf SSL configuration + * \param own_cert own public certificate chain + * \param pk_key own private key + * + * \return 0 on success or MBEDTLS_ERR_SSL_ALLOC_FAILED + */ +int mbedtls_ssl_conf_own_cert( mbedtls_ssl_config *conf, + mbedtls_x509_crt *own_cert, + mbedtls_pk_context *pk_key ); +#endif /* MBEDTLS_X509_CRT_PARSE_C */ + +#if defined(MBEDTLS_KEY_EXCHANGE_SOME_PSK_ENABLED) +/** + * \brief Configure a pre-shared key (PSK) and identity + * to be used in PSK-based ciphersuites. + * + * \note This is mainly useful for clients. Servers will usually + * want to use \c mbedtls_ssl_conf_psk_cb() instead. + * + * \note A PSK set by \c mbedtls_ssl_set_hs_psk() in the PSK callback + * takes precedence over a PSK configured by this function. + * + * \warning Currently, clients can only register a single pre-shared key. + * Calling this function or mbedtls_ssl_conf_psk_opaque() more + * than once will overwrite values configured in previous calls. + * Support for setting multiple PSKs on clients and selecting + * one based on the identity hint is not a planned feature, + * but feedback is welcomed. + * + * \param conf The SSL configuration to register the PSK with. + * \param psk The pointer to the pre-shared key to use. + * \param psk_len The length of the pre-shared key in bytes. + * \param psk_identity The pointer to the pre-shared key identity. + * \param psk_identity_len The length of the pre-shared key identity + * in bytes. + * + * \note The PSK and its identity are copied internally and + * hence need not be preserved by the caller for the lifetime + * of the SSL configuration. + * + * \return \c 0 if successful. + * \return An \c MBEDTLS_ERR_SSL_XXX error code on failure. + */ +int mbedtls_ssl_conf_psk( mbedtls_ssl_config *conf, + const unsigned char *psk, size_t psk_len, + const unsigned char *psk_identity, size_t psk_identity_len ); + +#if defined(MBEDTLS_USE_PSA_CRYPTO) +/** + * \brief Configure an opaque pre-shared key (PSK) and identity + * to be used in PSK-based ciphersuites. + * + * \note This is mainly useful for clients. Servers will usually + * want to use \c mbedtls_ssl_conf_psk_cb() instead. + * + * \note An opaque PSK set by \c mbedtls_ssl_set_hs_psk_opaque() in + * the PSK callback takes precedence over an opaque PSK + * configured by this function. + * + * \warning Currently, clients can only register a single pre-shared key. + * Calling this function or mbedtls_ssl_conf_psk() more than + * once will overwrite values configured in previous calls. + * Support for setting multiple PSKs on clients and selecting + * one based on the identity hint is not a planned feature, + * but feedback is welcomed. + * + * \param conf The SSL configuration to register the PSK with. + * \param psk The identifier of the key slot holding the PSK. + * Until \p conf is destroyed or this function is successfully + * called again, the key slot \p psk must be populated with a + * key of type PSA_ALG_CATEGORY_KEY_DERIVATION whose policy + * allows its use for the key derivation algorithm applied + * in the handshake. + * \param psk_identity The pointer to the pre-shared key identity. + * \param psk_identity_len The length of the pre-shared key identity + * in bytes. + * + * \note The PSK identity hint is copied internally and hence need + * not be preserved by the caller for the lifetime of the + * SSL configuration. + * + * \return \c 0 if successful. + * \return An \c MBEDTLS_ERR_SSL_XXX error code on failure. + */ +int mbedtls_ssl_conf_psk_opaque( mbedtls_ssl_config *conf, + psa_key_id_t psk, + const unsigned char *psk_identity, + size_t psk_identity_len ); +#endif /* MBEDTLS_USE_PSA_CRYPTO */ + +/** + * \brief Set the pre-shared Key (PSK) for the current handshake. + * + * \note This should only be called inside the PSK callback, + * i.e. the function passed to \c mbedtls_ssl_conf_psk_cb(). + * + * \note A PSK set by this function takes precedence over a PSK + * configured by \c mbedtls_ssl_conf_psk(). + * + * \param ssl The SSL context to configure a PSK for. + * \param psk The pointer to the pre-shared key. + * \param psk_len The length of the pre-shared key in bytes. + * + * \return \c 0 if successful. + * \return An \c MBEDTLS_ERR_SSL_XXX error code on failure. + */ +int mbedtls_ssl_set_hs_psk( mbedtls_ssl_context *ssl, + const unsigned char *psk, size_t psk_len ); + +#if defined(MBEDTLS_USE_PSA_CRYPTO) +/** + * \brief Set an opaque pre-shared Key (PSK) for the current handshake. + * + * \note This should only be called inside the PSK callback, + * i.e. the function passed to \c mbedtls_ssl_conf_psk_cb(). + * + * \note An opaque PSK set by this function takes precedence over an + * opaque PSK configured by \c mbedtls_ssl_conf_psk_opaque(). + * + * \param ssl The SSL context to configure a PSK for. + * \param psk The identifier of the key slot holding the PSK. + * For the duration of the current handshake, the key slot + * must be populated with a key of type + * PSA_ALG_CATEGORY_KEY_DERIVATION whose policy allows its + * use for the key derivation algorithm + * applied in the handshake. + * + * \return \c 0 if successful. + * \return An \c MBEDTLS_ERR_SSL_XXX error code on failure. + */ +int mbedtls_ssl_set_hs_psk_opaque( mbedtls_ssl_context *ssl, + psa_key_id_t psk ); +#endif /* MBEDTLS_USE_PSA_CRYPTO */ + +/** + * \brief Set the PSK callback (server-side only). + * + * If set, the PSK callback is called for each + * handshake where a PSK-based ciphersuite was negotiated. + * The caller provides the identity received and wants to + * receive the actual PSK data and length. + * + * The callback has the following parameters: + * - \c void*: The opaque pointer \p p_psk. + * - \c mbedtls_ssl_context*: The SSL context to which + * the operation applies. + * - \c const unsigned char*: The PSK identity + * selected by the client. + * - \c size_t: The length of the PSK identity + * selected by the client. + * + * If a valid PSK identity is found, the callback should use + * \c mbedtls_ssl_set_hs_psk() or + * \c mbedtls_ssl_set_hs_psk_opaque() + * on the SSL context to set the correct PSK and return \c 0. + * Any other return value will result in a denied PSK identity. + * + * \note A dynamic PSK (i.e. set by the PSK callback) takes + * precedence over a static PSK (i.e. set by + * \c mbedtls_ssl_conf_psk() or + * \c mbedtls_ssl_conf_psk_opaque()). + * This means that if you set a PSK callback using this + * function, you don't need to set a PSK using + * \c mbedtls_ssl_conf_psk() or + * \c mbedtls_ssl_conf_psk_opaque()). + * + * \param conf The SSL configuration to register the callback with. + * \param f_psk The callback for selecting and setting the PSK based + * in the PSK identity chosen by the client. + * \param p_psk A pointer to an opaque structure to be passed to + * the callback, for example a PSK store. + */ +void mbedtls_ssl_conf_psk_cb( mbedtls_ssl_config *conf, + int (*f_psk)(void *, mbedtls_ssl_context *, const unsigned char *, + size_t), + void *p_psk ); +#endif /* MBEDTLS_KEY_EXCHANGE_SOME_PSK_ENABLED */ + +#if defined(MBEDTLS_DHM_C) && defined(MBEDTLS_SSL_SRV_C) + +#if !defined(MBEDTLS_DEPRECATED_REMOVED) + +#if defined(MBEDTLS_DEPRECATED_WARNING) +#define MBEDTLS_DEPRECATED __attribute__((deprecated)) +#else +#define MBEDTLS_DEPRECATED +#endif + +/** + * \brief Set the Diffie-Hellman public P and G values, + * read as hexadecimal strings (server-side only) + * (Default values: MBEDTLS_DHM_RFC3526_MODP_2048_[PG]) + * + * \param conf SSL configuration + * \param dhm_P Diffie-Hellman-Merkle modulus + * \param dhm_G Diffie-Hellman-Merkle generator + * + * \deprecated Superseded by \c mbedtls_ssl_conf_dh_param_bin. + * + * \return 0 if successful + */ +MBEDTLS_DEPRECATED int mbedtls_ssl_conf_dh_param( mbedtls_ssl_config *conf, + const char *dhm_P, + const char *dhm_G ); + +#endif /* MBEDTLS_DEPRECATED_REMOVED */ + +/** + * \brief Set the Diffie-Hellman public P and G values + * from big-endian binary presentations. + * (Default values: MBEDTLS_DHM_RFC3526_MODP_2048_[PG]_BIN) + * + * \param conf SSL configuration + * \param dhm_P Diffie-Hellman-Merkle modulus in big-endian binary form + * \param P_len Length of DHM modulus + * \param dhm_G Diffie-Hellman-Merkle generator in big-endian binary form + * \param G_len Length of DHM generator + * + * \return 0 if successful + */ +int mbedtls_ssl_conf_dh_param_bin( mbedtls_ssl_config *conf, + const unsigned char *dhm_P, size_t P_len, + const unsigned char *dhm_G, size_t G_len ); + +/** + * \brief Set the Diffie-Hellman public P and G values, + * read from existing context (server-side only) + * + * \param conf SSL configuration + * \param dhm_ctx Diffie-Hellman-Merkle context + * + * \return 0 if successful + */ +int mbedtls_ssl_conf_dh_param_ctx( mbedtls_ssl_config *conf, mbedtls_dhm_context *dhm_ctx ); +#endif /* MBEDTLS_DHM_C && defined(MBEDTLS_SSL_SRV_C) */ + +#if defined(MBEDTLS_DHM_C) && defined(MBEDTLS_SSL_CLI_C) +/** + * \brief Set the minimum length for Diffie-Hellman parameters. + * (Client-side only.) + * (Default: 1024 bits.) + * + * \param conf SSL configuration + * \param bitlen Minimum bit length of the DHM prime + */ +void mbedtls_ssl_conf_dhm_min_bitlen( mbedtls_ssl_config *conf, + unsigned int bitlen ); +#endif /* MBEDTLS_DHM_C && MBEDTLS_SSL_CLI_C */ + +#if defined(MBEDTLS_ECP_C) +/** + * \brief Set the allowed curves in order of preference. + * (Default: all defined curves in order of decreasing size, + * except that Montgomery curves come last. This order + * is likely to change in a future version.) + * + * On server: this only affects selection of the ECDHE curve; + * the curves used for ECDH and ECDSA are determined by the + * list of available certificates instead. + * + * On client: this affects the list of curves offered for any + * use. The server can override our preference order. + * + * Both sides: limits the set of curves accepted for use in + * ECDHE and in the peer's end-entity certificate. + * + * \note This has no influence on which curves are allowed inside the + * certificate chains, see \c mbedtls_ssl_conf_cert_profile() + * for that. For the end-entity certificate however, the key + * will be accepted only if it is allowed both by this list + * and by the cert profile. + * + * \note This list should be ordered by decreasing preference + * (preferred curve first). + * + * \param conf SSL configuration + * \param curves Ordered list of allowed curves, + * terminated by MBEDTLS_ECP_DP_NONE. + */ +void mbedtls_ssl_conf_curves( mbedtls_ssl_config *conf, + const mbedtls_ecp_group_id *curves ); +#endif /* MBEDTLS_ECP_C */ + +#if defined(MBEDTLS_KEY_EXCHANGE_WITH_CERT_ENABLED) +/** + * \brief Set the allowed hashes for signatures during the handshake. + * (Default: all SHA-2 hashes, largest first. Also SHA-1 if + * the compile-time option + * `MBEDTLS_TLS_DEFAULT_ALLOW_SHA1_IN_KEY_EXCHANGE` is enabled.) + * + * \note This only affects which hashes are offered and can be used + * for signatures during the handshake. Hashes for message + * authentication and the TLS PRF are controlled by the + * ciphersuite, see \c mbedtls_ssl_conf_ciphersuites(). Hashes + * used for certificate signature are controlled by the + * verification profile, see \c mbedtls_ssl_conf_cert_profile(). + * + * \note This list should be ordered by decreasing preference + * (preferred hash first). + * + * \param conf SSL configuration + * \param hashes Ordered list of allowed signature hashes, + * terminated by \c MBEDTLS_MD_NONE. + */ +void mbedtls_ssl_conf_sig_hashes( mbedtls_ssl_config *conf, + const int *hashes ); +#endif /* MBEDTLS_KEY_EXCHANGE_WITH_CERT_ENABLED */ + +#if defined(MBEDTLS_X509_CRT_PARSE_C) +/** + * \brief Set or reset the hostname to check against the received + * server certificate. It sets the ServerName TLS extension, + * too, if that extension is enabled. (client-side only) + * + * \param ssl SSL context + * \param hostname the server hostname, may be NULL to clear hostname + + * \note Maximum hostname length MBEDTLS_SSL_MAX_HOST_NAME_LEN. + * + * \return 0 if successful, MBEDTLS_ERR_SSL_ALLOC_FAILED on + * allocation failure, MBEDTLS_ERR_SSL_BAD_INPUT_DATA on + * too long input hostname. + * + * Hostname set to the one provided on success (cleared + * when NULL). On allocation failure hostname is cleared. + * On too long input failure, old hostname is unchanged. + */ +int mbedtls_ssl_set_hostname( mbedtls_ssl_context *ssl, const char *hostname ); +#endif /* MBEDTLS_X509_CRT_PARSE_C */ + +#if defined(MBEDTLS_SSL_SERVER_NAME_INDICATION) +/** + * \brief Set own certificate and key for the current handshake + * + * \note Same as \c mbedtls_ssl_conf_own_cert() but for use within + * the SNI callback. + * + * \param ssl SSL context + * \param own_cert own public certificate chain + * \param pk_key own private key + * + * \return 0 on success or MBEDTLS_ERR_SSL_ALLOC_FAILED + */ +int mbedtls_ssl_set_hs_own_cert( mbedtls_ssl_context *ssl, + mbedtls_x509_crt *own_cert, + mbedtls_pk_context *pk_key ); + +/** + * \brief Set the data required to verify peer certificate for the + * current handshake + * + * \note Same as \c mbedtls_ssl_conf_ca_chain() but for use within + * the SNI callback. + * + * \param ssl SSL context + * \param ca_chain trusted CA chain (meaning all fully trusted top-level CAs) + * \param ca_crl trusted CA CRLs + */ +void mbedtls_ssl_set_hs_ca_chain( mbedtls_ssl_context *ssl, + mbedtls_x509_crt *ca_chain, + mbedtls_x509_crl *ca_crl ); + +/** + * \brief Set authmode for the current handshake. + * + * \note Same as \c mbedtls_ssl_conf_authmode() but for use within + * the SNI callback. + * + * \param ssl SSL context + * \param authmode MBEDTLS_SSL_VERIFY_NONE, MBEDTLS_SSL_VERIFY_OPTIONAL or + * MBEDTLS_SSL_VERIFY_REQUIRED + */ +void mbedtls_ssl_set_hs_authmode( mbedtls_ssl_context *ssl, + int authmode ); + +/** + * \brief Set server side ServerName TLS extension callback + * (optional, server-side only). + * + * If set, the ServerName callback is called whenever the + * server receives a ServerName TLS extension from the client + * during a handshake. The ServerName callback has the + * following parameters: (void *parameter, mbedtls_ssl_context *ssl, + * const unsigned char *hostname, size_t len). If a suitable + * certificate is found, the callback must set the + * certificate(s) and key(s) to use with \c + * mbedtls_ssl_set_hs_own_cert() (can be called repeatedly), + * and may optionally adjust the CA and associated CRL with \c + * mbedtls_ssl_set_hs_ca_chain() as well as the client + * authentication mode with \c mbedtls_ssl_set_hs_authmode(), + * then must return 0. If no matching name is found, the + * callback must either set a default cert, or + * return non-zero to abort the handshake at this point. + * + * \param conf SSL configuration + * \param f_sni verification function + * \param p_sni verification parameter + */ +void mbedtls_ssl_conf_sni( mbedtls_ssl_config *conf, + int (*f_sni)(void *, mbedtls_ssl_context *, const unsigned char *, + size_t), + void *p_sni ); +#endif /* MBEDTLS_SSL_SERVER_NAME_INDICATION */ + +#if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED) +/** + * \brief Set the EC J-PAKE password for current handshake. + * + * \note An internal copy is made, and destroyed as soon as the + * handshake is completed, or when the SSL context is reset or + * freed. + * + * \note The SSL context needs to be already set up. The right place + * to call this function is between \c mbedtls_ssl_setup() or + * \c mbedtls_ssl_reset() and \c mbedtls_ssl_handshake(). + * + * \param ssl SSL context + * \param pw EC J-PAKE password (pre-shared secret) + * \param pw_len length of pw in bytes + * + * \return 0 on success, or a negative error code. + */ +int mbedtls_ssl_set_hs_ecjpake_password( mbedtls_ssl_context *ssl, + const unsigned char *pw, + size_t pw_len ); +#endif /*MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED */ + +#if defined(MBEDTLS_SSL_ALPN) +/** + * \brief Set the supported Application Layer Protocols. + * + * \param conf SSL configuration + * \param protos Pointer to a NULL-terminated list of supported protocols, + * in decreasing preference order. The pointer to the list is + * recorded by the library for later reference as required, so + * the lifetime of the table must be atleast as long as the + * lifetime of the SSL configuration structure. + * + * \return 0 on success, or MBEDTLS_ERR_SSL_BAD_INPUT_DATA. + */ +int mbedtls_ssl_conf_alpn_protocols( mbedtls_ssl_config *conf, const char **protos ); + +/** + * \brief Get the name of the negotiated Application Layer Protocol. + * This function should be called after the handshake is + * completed. + * + * \param ssl SSL context + * + * \return Protcol name, or NULL if no protocol was negotiated. + */ +const char *mbedtls_ssl_get_alpn_protocol( const mbedtls_ssl_context *ssl ); +#endif /* MBEDTLS_SSL_ALPN */ + +#if defined(MBEDTLS_SSL_DTLS_SRTP) +#if defined(MBEDTLS_DEBUG_C) +static inline const char *mbedtls_ssl_get_srtp_profile_as_string( mbedtls_ssl_srtp_profile profile ) +{ + switch( profile ) + { + case MBEDTLS_TLS_SRTP_AES128_CM_HMAC_SHA1_80: + return( "MBEDTLS_TLS_SRTP_AES128_CM_HMAC_SHA1_80" ); + case MBEDTLS_TLS_SRTP_AES128_CM_HMAC_SHA1_32: + return( "MBEDTLS_TLS_SRTP_AES128_CM_HMAC_SHA1_32" ); + case MBEDTLS_TLS_SRTP_NULL_HMAC_SHA1_80: + return( "MBEDTLS_TLS_SRTP_NULL_HMAC_SHA1_80" ); + case MBEDTLS_TLS_SRTP_NULL_HMAC_SHA1_32: + return( "MBEDTLS_TLS_SRTP_NULL_HMAC_SHA1_32" ); + default: break; + } + return( "" ); +} +#endif /* MBEDTLS_DEBUG_C */ +/** + * \brief Manage support for mki(master key id) value + * in use_srtp extension. + * MKI is an optional part of SRTP used for key management + * and re-keying. See RFC3711 section 3.1 for details. + * The default value is + * #MBEDTLS_SSL_DTLS_SRTP_MKI_UNSUPPORTED. + * + * \param conf The SSL configuration to manage mki support. + * \param support_mki_value Enable or disable mki usage. Values are + * #MBEDTLS_SSL_DTLS_SRTP_MKI_UNSUPPORTED + * or #MBEDTLS_SSL_DTLS_SRTP_MKI_SUPPORTED. + */ +void mbedtls_ssl_conf_srtp_mki_value_supported( mbedtls_ssl_config *conf, + int support_mki_value ); + +/** + * \brief Set the supported DTLS-SRTP protection profiles. + * + * \param conf SSL configuration + * \param profiles Pointer to a List of MBEDTLS_TLS_SRTP_UNSET terminated + * supported protection profiles + * in decreasing preference order. + * The pointer to the list is recorded by the library + * for later reference as required, so the lifetime + * of the table must be at least as long as the lifetime + * of the SSL configuration structure. + * The list must not hold more than + * MBEDTLS_TLS_SRTP_MAX_PROFILE_LIST_LENGTH elements + * (excluding the terminating MBEDTLS_TLS_SRTP_UNSET). + * + * \return 0 on success + * \return #MBEDTLS_ERR_SSL_BAD_INPUT_DATA when the list of + * protection profiles is incorrect. + */ +int mbedtls_ssl_conf_dtls_srtp_protection_profiles + ( mbedtls_ssl_config *conf, + const mbedtls_ssl_srtp_profile *profiles ); + +/** + * \brief Set the mki_value for the current DTLS-SRTP session. + * + * \param ssl SSL context to use. + * \param mki_value The MKI value to set. + * \param mki_len The length of the MKI value. + * + * \note This function is relevant on client side only. + * The server discovers the mki value during handshake. + * A mki value set on server side using this function + * is ignored. + * + * \return 0 on success + * \return #MBEDTLS_ERR_SSL_BAD_INPUT_DATA + * \return #MBEDTLS_ERR_SSL_FEATURE_UNAVAILABLE + */ +int mbedtls_ssl_dtls_srtp_set_mki_value( mbedtls_ssl_context *ssl, + unsigned char *mki_value, + uint16_t mki_len ); +/** + * \brief Get the negotiated DTLS-SRTP informations: + * Protection profile and MKI value. + * + * \warning This function must be called after the handshake is + * completed. The value returned by this function must + * not be trusted or acted upon before the handshake completes. + * + * \param ssl The SSL context to query. + * \param dtls_srtp_info The negotiated DTLS-SRTP informations: + * - Protection profile in use. + * A direct mapping of the iana defined value for protection + * profile on an uint16_t. + http://www.iana.org/assignments/srtp-protection/srtp-protection.xhtml + * #MBEDTLS_TLS_SRTP_UNSET if the use of SRTP was not negotiated + * or peer's Hello packet was not parsed yet. + * - mki size and value( if size is > 0 ). + */ +void mbedtls_ssl_get_dtls_srtp_negotiation_result( const mbedtls_ssl_context *ssl, + mbedtls_dtls_srtp_info *dtls_srtp_info ); +#endif /* MBEDTLS_SSL_DTLS_SRTP */ + +/** + * \brief Set the maximum supported version sent from the client side + * and/or accepted at the server side + * (Default: MBEDTLS_SSL_MAX_MAJOR_VERSION, MBEDTLS_SSL_MAX_MINOR_VERSION) + * + * \note This ignores ciphersuites from higher versions. + * + * \note With DTLS, use MBEDTLS_SSL_MINOR_VERSION_2 for DTLS 1.0 and + * MBEDTLS_SSL_MINOR_VERSION_3 for DTLS 1.2 + * + * \param conf SSL configuration + * \param major Major version number (only MBEDTLS_SSL_MAJOR_VERSION_3 supported) + * \param minor Minor version number (MBEDTLS_SSL_MINOR_VERSION_0, + * MBEDTLS_SSL_MINOR_VERSION_1 and MBEDTLS_SSL_MINOR_VERSION_2, + * MBEDTLS_SSL_MINOR_VERSION_3 supported) + */ +void mbedtls_ssl_conf_max_version( mbedtls_ssl_config *conf, int major, int minor ); + +/** + * \brief Set the minimum accepted SSL/TLS protocol version + * (Default: TLS 1.0) + * + * \note Input outside of the SSL_MAX_XXXXX_VERSION and + * SSL_MIN_XXXXX_VERSION range is ignored. + * + * \note MBEDTLS_SSL_MINOR_VERSION_0 (SSL v3) should be avoided. + * + * \note With DTLS, use MBEDTLS_SSL_MINOR_VERSION_2 for DTLS 1.0 and + * MBEDTLS_SSL_MINOR_VERSION_3 for DTLS 1.2 + * + * \param conf SSL configuration + * \param major Major version number (only MBEDTLS_SSL_MAJOR_VERSION_3 supported) + * \param minor Minor version number (MBEDTLS_SSL_MINOR_VERSION_0, + * MBEDTLS_SSL_MINOR_VERSION_1 and MBEDTLS_SSL_MINOR_VERSION_2, + * MBEDTLS_SSL_MINOR_VERSION_3 supported) + */ +void mbedtls_ssl_conf_min_version( mbedtls_ssl_config *conf, int major, int minor ); + +#if defined(MBEDTLS_SSL_FALLBACK_SCSV) && defined(MBEDTLS_SSL_CLI_C) +/** + * \brief Set the fallback flag (client-side only). + * (Default: MBEDTLS_SSL_IS_NOT_FALLBACK). + * + * \note Set to MBEDTLS_SSL_IS_FALLBACK when preparing a fallback + * connection, that is a connection with max_version set to a + * lower value than the value you're willing to use. Such + * fallback connections are not recommended but are sometimes + * necessary to interoperate with buggy (version-intolerant) + * servers. + * + * \warning You should NOT set this to MBEDTLS_SSL_IS_FALLBACK for + * non-fallback connections! This would appear to work for a + * while, then cause failures when the server is upgraded to + * support a newer TLS version. + * + * \param conf SSL configuration + * \param fallback MBEDTLS_SSL_IS_NOT_FALLBACK or MBEDTLS_SSL_IS_FALLBACK + */ +void mbedtls_ssl_conf_fallback( mbedtls_ssl_config *conf, char fallback ); +#endif /* MBEDTLS_SSL_FALLBACK_SCSV && MBEDTLS_SSL_CLI_C */ + +#if defined(MBEDTLS_SSL_ENCRYPT_THEN_MAC) +/** + * \brief Enable or disable Encrypt-then-MAC + * (Default: MBEDTLS_SSL_ETM_ENABLED) + * + * \note This should always be enabled, it is a security + * improvement, and should not cause any interoperability + * issue (used only if the peer supports it too). + * + * \param conf SSL configuration + * \param etm MBEDTLS_SSL_ETM_ENABLED or MBEDTLS_SSL_ETM_DISABLED + */ +void mbedtls_ssl_conf_encrypt_then_mac( mbedtls_ssl_config *conf, char etm ); +#endif /* MBEDTLS_SSL_ENCRYPT_THEN_MAC */ + +#if defined(MBEDTLS_SSL_EXTENDED_MASTER_SECRET) +/** + * \brief Enable or disable Extended Master Secret negotiation. + * (Default: MBEDTLS_SSL_EXTENDED_MS_ENABLED) + * + * \note This should always be enabled, it is a security fix to the + * protocol, and should not cause any interoperability issue + * (used only if the peer supports it too). + * + * \param conf SSL configuration + * \param ems MBEDTLS_SSL_EXTENDED_MS_ENABLED or MBEDTLS_SSL_EXTENDED_MS_DISABLED + */ +void mbedtls_ssl_conf_extended_master_secret( mbedtls_ssl_config *conf, char ems ); +#endif /* MBEDTLS_SSL_EXTENDED_MASTER_SECRET */ + +#if defined(MBEDTLS_ARC4_C) +/** + * \brief Disable or enable support for RC4 + * (Default: MBEDTLS_SSL_ARC4_DISABLED) + * + * \warning Use of RC4 in DTLS/TLS has been prohibited by RFC 7465 + * for security reasons. Use at your own risk. + * + * \note This function is deprecated and will be removed in + * a future version of the library. + * RC4 is disabled by default at compile time and needs to be + * actively enabled for use with legacy systems. + * + * \param conf SSL configuration + * \param arc4 MBEDTLS_SSL_ARC4_ENABLED or MBEDTLS_SSL_ARC4_DISABLED + */ +void mbedtls_ssl_conf_arc4_support( mbedtls_ssl_config *conf, char arc4 ); +#endif /* MBEDTLS_ARC4_C */ + +#if defined(MBEDTLS_SSL_SRV_C) +/** + * \brief Whether to send a list of acceptable CAs in + * CertificateRequest messages. + * (Default: do send) + * + * \param conf SSL configuration + * \param cert_req_ca_list MBEDTLS_SSL_CERT_REQ_CA_LIST_ENABLED or + * MBEDTLS_SSL_CERT_REQ_CA_LIST_DISABLED + */ +void mbedtls_ssl_conf_cert_req_ca_list( mbedtls_ssl_config *conf, + char cert_req_ca_list ); +#endif /* MBEDTLS_SSL_SRV_C */ + +#if defined(MBEDTLS_SSL_MAX_FRAGMENT_LENGTH) +/** + * \brief Set the maximum fragment length to emit and/or negotiate. + * (Typical: the smaller of #MBEDTLS_SSL_IN_CONTENT_LEN and + * #MBEDTLS_SSL_OUT_CONTENT_LEN, usually `2^14` bytes) + * (Server: set maximum fragment length to emit, + * usually negotiated by the client during handshake) + * (Client: set maximum fragment length to emit *and* + * negotiate with the server during handshake) + * (Default: #MBEDTLS_SSL_MAX_FRAG_LEN_NONE) + * + * \note On the client side, the maximum fragment length extension + * *will not* be used, unless the maximum fragment length has + * been set via this function to a value different than + * #MBEDTLS_SSL_MAX_FRAG_LEN_NONE. + * + * \note With TLS, this currently only affects ApplicationData (sent + * with \c mbedtls_ssl_read()), not handshake messages. + * With DTLS, this affects both ApplicationData and handshake. + * + * \note This sets the maximum length for a record's payload, + * excluding record overhead that will be added to it, see + * \c mbedtls_ssl_get_record_expansion(). + * + * \note For DTLS, it is also possible to set a limit for the total + * size of daragrams passed to the transport layer, including + * record overhead, see \c mbedtls_ssl_set_mtu(). + * + * \param conf SSL configuration + * \param mfl_code Code for maximum fragment length (allowed values: + * MBEDTLS_SSL_MAX_FRAG_LEN_512, MBEDTLS_SSL_MAX_FRAG_LEN_1024, + * MBEDTLS_SSL_MAX_FRAG_LEN_2048, MBEDTLS_SSL_MAX_FRAG_LEN_4096) + * + * \return 0 if successful or MBEDTLS_ERR_SSL_BAD_INPUT_DATA + */ +int mbedtls_ssl_conf_max_frag_len( mbedtls_ssl_config *conf, unsigned char mfl_code ); +#endif /* MBEDTLS_SSL_MAX_FRAGMENT_LENGTH */ + +#if defined(MBEDTLS_SSL_TRUNCATED_HMAC) +/** + * \brief Activate negotiation of truncated HMAC + * (Default: MBEDTLS_SSL_TRUNC_HMAC_DISABLED) + * + * \param conf SSL configuration + * \param truncate Enable or disable (MBEDTLS_SSL_TRUNC_HMAC_ENABLED or + * MBEDTLS_SSL_TRUNC_HMAC_DISABLED) + */ +void mbedtls_ssl_conf_truncated_hmac( mbedtls_ssl_config *conf, int truncate ); +#endif /* MBEDTLS_SSL_TRUNCATED_HMAC */ + +#if defined(MBEDTLS_SSL_CBC_RECORD_SPLITTING) +/** + * \brief Enable / Disable 1/n-1 record splitting + * (Default: MBEDTLS_SSL_CBC_RECORD_SPLITTING_ENABLED) + * + * \note Only affects SSLv3 and TLS 1.0, not higher versions. + * Does not affect non-CBC ciphersuites in any version. + * + * \param conf SSL configuration + * \param split MBEDTLS_SSL_CBC_RECORD_SPLITTING_ENABLED or + * MBEDTLS_SSL_CBC_RECORD_SPLITTING_DISABLED + */ +void mbedtls_ssl_conf_cbc_record_splitting( mbedtls_ssl_config *conf, char split ); +#endif /* MBEDTLS_SSL_CBC_RECORD_SPLITTING */ + +#if defined(MBEDTLS_SSL_SESSION_TICKETS) && defined(MBEDTLS_SSL_CLI_C) +/** + * \brief Enable / Disable session tickets (client only). + * (Default: MBEDTLS_SSL_SESSION_TICKETS_ENABLED.) + * + * \note On server, use \c mbedtls_ssl_conf_session_tickets_cb(). + * + * \param conf SSL configuration + * \param use_tickets Enable or disable (MBEDTLS_SSL_SESSION_TICKETS_ENABLED or + * MBEDTLS_SSL_SESSION_TICKETS_DISABLED) + */ +void mbedtls_ssl_conf_session_tickets( mbedtls_ssl_config *conf, int use_tickets ); +#endif /* MBEDTLS_SSL_SESSION_TICKETS && MBEDTLS_SSL_CLI_C */ + +#if defined(MBEDTLS_SSL_RENEGOTIATION) +/** + * \brief Enable / Disable renegotiation support for connection when + * initiated by peer + * (Default: MBEDTLS_SSL_RENEGOTIATION_DISABLED) + * + * \warning It is recommended to always disable renegotation unless you + * know you need it and you know what you're doing. In the + * past, there have been several issues associated with + * renegotiation or a poor understanding of its properties. + * + * \note Server-side, enabling renegotiation also makes the server + * susceptible to a resource DoS by a malicious client. + * + * \param conf SSL configuration + * \param renegotiation Enable or disable (MBEDTLS_SSL_RENEGOTIATION_ENABLED or + * MBEDTLS_SSL_RENEGOTIATION_DISABLED) + */ +void mbedtls_ssl_conf_renegotiation( mbedtls_ssl_config *conf, int renegotiation ); +#endif /* MBEDTLS_SSL_RENEGOTIATION */ + +/** + * \brief Prevent or allow legacy renegotiation. + * (Default: MBEDTLS_SSL_LEGACY_NO_RENEGOTIATION) + * + * MBEDTLS_SSL_LEGACY_NO_RENEGOTIATION allows connections to + * be established even if the peer does not support + * secure renegotiation, but does not allow renegotiation + * to take place if not secure. + * (Interoperable and secure option) + * + * MBEDTLS_SSL_LEGACY_ALLOW_RENEGOTIATION allows renegotiations + * with non-upgraded peers. Allowing legacy renegotiation + * makes the connection vulnerable to specific man in the + * middle attacks. (See RFC 5746) + * (Most interoperable and least secure option) + * + * MBEDTLS_SSL_LEGACY_BREAK_HANDSHAKE breaks off connections + * if peer does not support secure renegotiation. Results + * in interoperability issues with non-upgraded peers + * that do not support renegotiation altogether. + * (Most secure option, interoperability issues) + * + * \param conf SSL configuration + * \param allow_legacy Prevent or allow (SSL_NO_LEGACY_RENEGOTIATION, + * SSL_ALLOW_LEGACY_RENEGOTIATION or + * MBEDTLS_SSL_LEGACY_BREAK_HANDSHAKE) + */ +void mbedtls_ssl_conf_legacy_renegotiation( mbedtls_ssl_config *conf, int allow_legacy ); + +#if defined(MBEDTLS_SSL_RENEGOTIATION) +/** + * \brief Enforce renegotiation requests. + * (Default: enforced, max_records = 16) + * + * When we request a renegotiation, the peer can comply or + * ignore the request. This function allows us to decide + * whether to enforce our renegotiation requests by closing + * the connection if the peer doesn't comply. + * + * However, records could already be in transit from the peer + * when the request is emitted. In order to increase + * reliability, we can accept a number of records before the + * expected handshake records. + * + * The optimal value is highly dependent on the specific usage + * scenario. + * + * \note With DTLS and server-initiated renegotiation, the + * HelloRequest is retransmited every time mbedtls_ssl_read() times + * out or receives Application Data, until: + * - max_records records have beens seen, if it is >= 0, or + * - the number of retransmits that would happen during an + * actual handshake has been reached. + * Please remember the request might be lost a few times + * if you consider setting max_records to a really low value. + * + * \warning On client, the grace period can only happen during + * mbedtls_ssl_read(), as opposed to mbedtls_ssl_write() and mbedtls_ssl_renegotiate() + * which always behave as if max_record was 0. The reason is, + * if we receive application data from the server, we need a + * place to write it, which only happens during mbedtls_ssl_read(). + * + * \param conf SSL configuration + * \param max_records Use MBEDTLS_SSL_RENEGOTIATION_NOT_ENFORCED if you don't want to + * enforce renegotiation, or a non-negative value to enforce + * it but allow for a grace period of max_records records. + */ +void mbedtls_ssl_conf_renegotiation_enforced( mbedtls_ssl_config *conf, int max_records ); + +/** + * \brief Set record counter threshold for periodic renegotiation. + * (Default: 2^48 - 1) + * + * Renegotiation is automatically triggered when a record + * counter (outgoing or incoming) crosses the defined + * threshold. The default value is meant to prevent the + * connection from being closed when the counter is about to + * reached its maximal value (it is not allowed to wrap). + * + * Lower values can be used to enforce policies such as "keys + * must be refreshed every N packets with cipher X". + * + * The renegotiation period can be disabled by setting + * conf->disable_renegotiation to + * MBEDTLS_SSL_RENEGOTIATION_DISABLED. + * + * \note When the configured transport is + * MBEDTLS_SSL_TRANSPORT_DATAGRAM the maximum renegotiation + * period is 2^48 - 1, and for MBEDTLS_SSL_TRANSPORT_STREAM, + * the maximum renegotiation period is 2^64 - 1. + * + * \param conf SSL configuration + * \param period The threshold value: a big-endian 64-bit number. + */ +void mbedtls_ssl_conf_renegotiation_period( mbedtls_ssl_config *conf, + const unsigned char period[8] ); +#endif /* MBEDTLS_SSL_RENEGOTIATION */ + +/** + * \brief Check if there is data already read from the + * underlying transport but not yet processed. + * + * \param ssl SSL context + * + * \return 0 if nothing's pending, 1 otherwise. + * + * \note This is different in purpose and behaviour from + * \c mbedtls_ssl_get_bytes_avail in that it considers + * any kind of unprocessed data, not only unread + * application data. If \c mbedtls_ssl_get_bytes + * returns a non-zero value, this function will + * also signal pending data, but the converse does + * not hold. For example, in DTLS there might be + * further records waiting to be processed from + * the current underlying transport's datagram. + * + * \note If this function returns 1 (data pending), this + * does not imply that a subsequent call to + * \c mbedtls_ssl_read will provide any data; + * e.g., the unprocessed data might turn out + * to be an alert or a handshake message. + * + * \note This function is useful in the following situation: + * If the SSL/TLS module successfully returns from an + * operation - e.g. a handshake or an application record + * read - and you're awaiting incoming data next, you + * must not immediately idle on the underlying transport + * to have data ready, but you need to check the value + * of this function first. The reason is that the desired + * data might already be read but not yet processed. + * If, in contrast, a previous call to the SSL/TLS module + * returned MBEDTLS_ERR_SSL_WANT_READ, it is not necessary + * to call this function, as the latter error code entails + * that all internal data has been processed. + * + */ +int mbedtls_ssl_check_pending( const mbedtls_ssl_context *ssl ); + +/** + * \brief Return the number of application data bytes + * remaining to be read from the current record. + * + * \param ssl SSL context + * + * \return How many bytes are available in the application + * data record read buffer. + * + * \note When working over a datagram transport, this is + * useful to detect the current datagram's boundary + * in case \c mbedtls_ssl_read has written the maximal + * amount of data fitting into the input buffer. + * + */ +size_t mbedtls_ssl_get_bytes_avail( const mbedtls_ssl_context *ssl ); + +/** + * \brief Return the result of the certificate verification + * + * \param ssl The SSL context to use. + * + * \return \c 0 if the certificate verification was successful. + * \return \c -1u if the result is not available. This may happen + * e.g. if the handshake aborts early, or a verification + * callback returned a fatal error. + * \return A bitwise combination of \c MBEDTLS_X509_BADCERT_XXX + * and \c MBEDTLS_X509_BADCRL_XXX failure flags; see x509.h. + */ +uint32_t mbedtls_ssl_get_verify_result( const mbedtls_ssl_context *ssl ); + +/** + * \brief Return the name of the current ciphersuite + * + * \param ssl SSL context + * + * \return a string containing the ciphersuite name + */ +const char *mbedtls_ssl_get_ciphersuite( const mbedtls_ssl_context *ssl ); + +/** + * \brief Return the current SSL version (SSLv3/TLSv1/etc) + * + * \param ssl SSL context + * + * \return a string containing the SSL version + */ +const char *mbedtls_ssl_get_version( const mbedtls_ssl_context *ssl ); + +/** + * \brief Return the (maximum) number of bytes added by the record + * layer: header + encryption/MAC overhead (inc. padding) + * + * \note This function is not available (always returns an error) + * when record compression is enabled. + * + * \param ssl SSL context + * + * \return Current maximum record expansion in bytes, or + * MBEDTLS_ERR_SSL_FEATURE_UNAVAILABLE if compression is + * enabled, which makes expansion much less predictable + */ +int mbedtls_ssl_get_record_expansion( const mbedtls_ssl_context *ssl ); + +#if defined(MBEDTLS_SSL_MAX_FRAGMENT_LENGTH) +/** + * \brief Return the maximum fragment length (payload, in bytes) for + * the output buffer. For the client, this is the configured + * value. For the server, it is the minimum of two - the + * configured value and the negotiated one. + * + * \sa mbedtls_ssl_conf_max_frag_len() + * \sa mbedtls_ssl_get_max_record_payload() + * + * \param ssl SSL context + * + * \return Current maximum fragment length for the output buffer. + */ +size_t mbedtls_ssl_get_output_max_frag_len( const mbedtls_ssl_context *ssl ); + +/** + * \brief Return the maximum fragment length (payload, in bytes) for + * the input buffer. This is the negotiated maximum fragment + * length, or, if there is none, MBEDTLS_SSL_MAX_CONTENT_LEN. + * If it is not defined either, the value is 2^14. This function + * works as its predecessor, \c mbedtls_ssl_get_max_frag_len(). + * + * \sa mbedtls_ssl_conf_max_frag_len() + * \sa mbedtls_ssl_get_max_record_payload() + * + * \param ssl SSL context + * + * \return Current maximum fragment length for the output buffer. + */ +size_t mbedtls_ssl_get_input_max_frag_len( const mbedtls_ssl_context *ssl ); + +#if !defined(MBEDTLS_DEPRECATED_REMOVED) + +#if defined(MBEDTLS_DEPRECATED_WARNING) +#define MBEDTLS_DEPRECATED __attribute__((deprecated)) +#else +#define MBEDTLS_DEPRECATED +#endif + +/** + * \brief This function is a deprecated approach to getting the max + * fragment length. Its an alias for + * \c mbedtls_ssl_get_output_max_frag_len(), as the behaviour + * is the same. See \c mbedtls_ssl_get_output_max_frag_len() for + * more detail. + * + * \sa mbedtls_ssl_get_input_max_frag_len() + * \sa mbedtls_ssl_get_output_max_frag_len() + * + * \param ssl SSL context + * + * \return Current maximum fragment length for the output buffer. + */ +MBEDTLS_DEPRECATED size_t mbedtls_ssl_get_max_frag_len( + const mbedtls_ssl_context *ssl ); +#endif /* MBEDTLS_DEPRECATED_REMOVED */ +#endif /* MBEDTLS_SSL_MAX_FRAGMENT_LENGTH */ + +/** + * \brief Return the current maximum outgoing record payload in bytes. + * This takes into account the config.h setting \c + * MBEDTLS_SSL_OUT_CONTENT_LEN, the configured and negotiated + * max fragment length extension if used, and for DTLS the + * path MTU as configured and current record expansion. + * + * \note With DTLS, \c mbedtls_ssl_write() will return an error if + * called with a larger length value. + * With TLS, \c mbedtls_ssl_write() will fragment the input if + * necessary and return the number of bytes written; it is up + * to the caller to call \c mbedtls_ssl_write() again in + * order to send the remaining bytes if any. + * + * \note This function is not available (always returns an error) + * when record compression is enabled. + * + * \sa mbedtls_ssl_set_mtu() + * \sa mbedtls_ssl_get_output_max_frag_len() + * \sa mbedtls_ssl_get_input_max_frag_len() + * \sa mbedtls_ssl_get_record_expansion() + * + * \param ssl SSL context + * + * \return Current maximum payload for an outgoing record, + * or a negative error code. + */ +int mbedtls_ssl_get_max_out_record_payload( const mbedtls_ssl_context *ssl ); + +#if defined(MBEDTLS_X509_CRT_PARSE_C) +/** + * \brief Return the peer certificate from the current connection. + * + * \param ssl The SSL context to use. This must be initialized and setup. + * + * \return The current peer certificate, if available. + * The returned certificate is owned by the SSL context and + * is valid only until the next call to the SSL API. + * \return \c NULL if no peer certificate is available. This might + * be because the chosen ciphersuite doesn't use CRTs + * (PSK-based ciphersuites, for example), or because + * #MBEDTLS_SSL_KEEP_PEER_CERTIFICATE has been disabled, + * allowing the stack to free the peer's CRT to save memory. + * + * \note For one-time inspection of the peer's certificate during + * the handshake, consider registering an X.509 CRT verification + * callback through mbedtls_ssl_conf_verify() instead of calling + * this function. Using mbedtls_ssl_conf_verify() also comes at + * the benefit of allowing you to influence the verification + * process, for example by masking expected and tolerated + * verification failures. + * + * \warning You must not use the pointer returned by this function + * after any further call to the SSL API, including + * mbedtls_ssl_read() and mbedtls_ssl_write(); this is + * because the pointer might change during renegotiation, + * which happens transparently to the user. + * If you want to use the certificate across API calls, + * you must make a copy. + */ +const mbedtls_x509_crt *mbedtls_ssl_get_peer_cert( const mbedtls_ssl_context *ssl ); +#endif /* MBEDTLS_X509_CRT_PARSE_C */ + +#if defined(MBEDTLS_SSL_CLI_C) +/** + * \brief Save session in order to resume it later (client-side only) + * Session data is copied to presented session structure. + * + * + * \param ssl SSL context + * \param session session context + * + * \return 0 if successful, + * MBEDTLS_ERR_SSL_ALLOC_FAILED if memory allocation failed, + * MBEDTLS_ERR_SSL_BAD_INPUT_DATA if used server-side or + * arguments are otherwise invalid. + * + * \note Only the server certificate is copied, and not the full chain, + * so you should not attempt to validate the certificate again + * by calling \c mbedtls_x509_crt_verify() on it. + * Instead, you should use the results from the verification + * in the original handshake by calling \c mbedtls_ssl_get_verify_result() + * after loading the session again into a new SSL context + * using \c mbedtls_ssl_set_session(). + * + * \note Once the session object is not needed anymore, you should + * free it by calling \c mbedtls_ssl_session_free(). + * + * \sa mbedtls_ssl_set_session() + */ +int mbedtls_ssl_get_session( const mbedtls_ssl_context *ssl, mbedtls_ssl_session *session ); +#endif /* MBEDTLS_SSL_CLI_C */ + +/** + * \brief Perform the SSL handshake + * + * \param ssl SSL context + * + * \return \c 0 if successful. + * \return #MBEDTLS_ERR_SSL_WANT_READ or #MBEDTLS_ERR_SSL_WANT_WRITE + * if the handshake is incomplete and waiting for data to + * be available for reading from or writing to the underlying + * transport - in this case you must call this function again + * when the underlying transport is ready for the operation. + * \return #MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS if an asynchronous + * operation is in progress (see + * mbedtls_ssl_conf_async_private_cb()) - in this case you + * must call this function again when the operation is ready. + * \return #MBEDTLS_ERR_SSL_CRYPTO_IN_PROGRESS if a cryptographic + * operation is in progress (see mbedtls_ecp_set_max_ops()) - + * in this case you must call this function again to complete + * the handshake when you're done attending other tasks. + * \return #MBEDTLS_ERR_SSL_HELLO_VERIFY_REQUIRED if DTLS is in use + * and the client did not demonstrate reachability yet - in + * this case you must stop using the context (see below). + * \return Another SSL error code - in this case you must stop using + * the context (see below). + * + * \warning If this function returns something other than + * \c 0, + * #MBEDTLS_ERR_SSL_WANT_READ, + * #MBEDTLS_ERR_SSL_WANT_WRITE, + * #MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS or + * #MBEDTLS_ERR_SSL_CRYPTO_IN_PROGRESS, + * you must stop using the SSL context for reading or writing, + * and either free it or call \c mbedtls_ssl_session_reset() + * on it before re-using it for a new connection; the current + * connection must be closed. + * + * \note If DTLS is in use, then you may choose to handle + * #MBEDTLS_ERR_SSL_HELLO_VERIFY_REQUIRED specially for logging + * purposes, as it is an expected return value rather than an + * actual error, but you still need to reset/free the context. + * + * \note Remarks regarding event-driven DTLS: + * If the function returns #MBEDTLS_ERR_SSL_WANT_READ, no datagram + * from the underlying transport layer is currently being processed, + * and it is safe to idle until the timer or the underlying transport + * signal a new event. This is not true for a successful handshake, + * in which case the datagram of the underlying transport that is + * currently being processed might or might not contain further + * DTLS records. + */ +int mbedtls_ssl_handshake( mbedtls_ssl_context *ssl ); + +/** + * \brief Perform a single step of the SSL handshake + * + * \note The state of the context (ssl->state) will be at + * the next state after this function returns \c 0. Do not + * call this function if state is MBEDTLS_SSL_HANDSHAKE_OVER. + * + * \param ssl SSL context + * + * \return See mbedtls_ssl_handshake(). + * + * \warning If this function returns something other than \c 0, + * #MBEDTLS_ERR_SSL_WANT_READ, #MBEDTLS_ERR_SSL_WANT_WRITE, + * #MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS or + * #MBEDTLS_ERR_SSL_CRYPTO_IN_PROGRESS, you must stop using + * the SSL context for reading or writing, and either free it + * or call \c mbedtls_ssl_session_reset() on it before + * re-using it for a new connection; the current connection + * must be closed. + */ +int mbedtls_ssl_handshake_step( mbedtls_ssl_context *ssl ); + +#if defined(MBEDTLS_SSL_RENEGOTIATION) +/** + * \brief Initiate an SSL renegotiation on the running connection. + * Client: perform the renegotiation right now. + * Server: request renegotiation, which will be performed + * during the next call to mbedtls_ssl_read() if honored by + * client. + * + * \param ssl SSL context + * + * \return 0 if successful, or any mbedtls_ssl_handshake() return + * value except #MBEDTLS_ERR_SSL_CLIENT_RECONNECT that can't + * happen during a renegotiation. + * + * \warning If this function returns something other than \c 0, + * #MBEDTLS_ERR_SSL_WANT_READ, #MBEDTLS_ERR_SSL_WANT_WRITE, + * #MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS or + * #MBEDTLS_ERR_SSL_CRYPTO_IN_PROGRESS, you must stop using + * the SSL context for reading or writing, and either free it + * or call \c mbedtls_ssl_session_reset() on it before + * re-using it for a new connection; the current connection + * must be closed. + * + */ +int mbedtls_ssl_renegotiate( mbedtls_ssl_context *ssl ); +#endif /* MBEDTLS_SSL_RENEGOTIATION */ + +/** + * \brief Read at most 'len' application data bytes + * + * \param ssl SSL context + * \param buf buffer that will hold the data + * \param len maximum number of bytes to read + * + * \return The (positive) number of bytes read if successful. + * \return \c 0 if the read end of the underlying transport was closed + * without sending a CloseNotify beforehand, which might happen + * because of various reasons (internal error of an underlying + * stack, non-conformant peer not sending a CloseNotify and + * such) - in this case you must stop using the context + * (see below). + * \return #MBEDTLS_ERR_SSL_PEER_CLOSE_NOTIFY if the underlying + * transport is still functional, but the peer has + * acknowledged to not send anything anymore. + * \return #MBEDTLS_ERR_SSL_WANT_READ or #MBEDTLS_ERR_SSL_WANT_WRITE + * if the handshake is incomplete and waiting for data to + * be available for reading from or writing to the underlying + * transport - in this case you must call this function again + * when the underlying transport is ready for the operation. + * \return #MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS if an asynchronous + * operation is in progress (see + * mbedtls_ssl_conf_async_private_cb()) - in this case you + * must call this function again when the operation is ready. + * \return #MBEDTLS_ERR_SSL_CRYPTO_IN_PROGRESS if a cryptographic + * operation is in progress (see mbedtls_ecp_set_max_ops()) - + * in this case you must call this function again to complete + * the handshake when you're done attending other tasks. + * \return #MBEDTLS_ERR_SSL_CLIENT_RECONNECT if we're at the server + * side of a DTLS connection and the client is initiating a + * new connection using the same source port. See below. + * \return Another SSL error code - in this case you must stop using + * the context (see below). + * + * \warning If this function returns something other than + * a positive value, + * #MBEDTLS_ERR_SSL_WANT_READ, + * #MBEDTLS_ERR_SSL_WANT_WRITE, + * #MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS, + * #MBEDTLS_ERR_SSL_CRYPTO_IN_PROGRESS or + * #MBEDTLS_ERR_SSL_CLIENT_RECONNECT, + * you must stop using the SSL context for reading or writing, + * and either free it or call \c mbedtls_ssl_session_reset() + * on it before re-using it for a new connection; the current + * connection must be closed. + * + * \note When this function returns #MBEDTLS_ERR_SSL_CLIENT_RECONNECT + * (which can only happen server-side), it means that a client + * is initiating a new connection using the same source port. + * You can either treat that as a connection close and wait + * for the client to resend a ClientHello, or directly + * continue with \c mbedtls_ssl_handshake() with the same + * context (as it has been reset internally). Either way, you + * must make sure this is seen by the application as a new + * connection: application state, if any, should be reset, and + * most importantly the identity of the client must be checked + * again. WARNING: not validating the identity of the client + * again, or not transmitting the new identity to the + * application layer, would allow authentication bypass! + * + * \note Remarks regarding event-driven DTLS: + * - If the function returns #MBEDTLS_ERR_SSL_WANT_READ, no datagram + * from the underlying transport layer is currently being processed, + * and it is safe to idle until the timer or the underlying transport + * signal a new event. + * - This function may return MBEDTLS_ERR_SSL_WANT_READ even if data was + * initially available on the underlying transport, as this data may have + * been only e.g. duplicated messages or a renegotiation request. + * Therefore, you must be prepared to receive MBEDTLS_ERR_SSL_WANT_READ even + * when reacting to an incoming-data event from the underlying transport. + * - On success, the datagram of the underlying transport that is currently + * being processed may contain further DTLS records. You should call + * \c mbedtls_ssl_check_pending to check for remaining records. + * + */ +int mbedtls_ssl_read( mbedtls_ssl_context *ssl, unsigned char *buf, size_t len ); + +/** + * \brief Try to write exactly 'len' application data bytes + * + * \warning This function will do partial writes in some cases. If the + * return value is non-negative but less than length, the + * function must be called again with updated arguments: + * buf + ret, len - ret (if ret is the return value) until + * it returns a value equal to the last 'len' argument. + * + * \param ssl SSL context + * \param buf buffer holding the data + * \param len how many bytes must be written + * + * \return The (non-negative) number of bytes actually written if + * successful (may be less than \p len). + * \return #MBEDTLS_ERR_SSL_WANT_READ or #MBEDTLS_ERR_SSL_WANT_WRITE + * if the handshake is incomplete and waiting for data to + * be available for reading from or writing to the underlying + * transport - in this case you must call this function again + * when the underlying transport is ready for the operation. + * \return #MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS if an asynchronous + * operation is in progress (see + * mbedtls_ssl_conf_async_private_cb()) - in this case you + * must call this function again when the operation is ready. + * \return #MBEDTLS_ERR_SSL_CRYPTO_IN_PROGRESS if a cryptographic + * operation is in progress (see mbedtls_ecp_set_max_ops()) - + * in this case you must call this function again to complete + * the handshake when you're done attending other tasks. + * \return Another SSL error code - in this case you must stop using + * the context (see below). + * + * \warning If this function returns something other than + * a non-negative value, + * #MBEDTLS_ERR_SSL_WANT_READ, + * #MBEDTLS_ERR_SSL_WANT_WRITE, + * #MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS or + * #MBEDTLS_ERR_SSL_CRYPTO_IN_PROGRESS, + * you must stop using the SSL context for reading or writing, + * and either free it or call \c mbedtls_ssl_session_reset() + * on it before re-using it for a new connection; the current + * connection must be closed. + * + * \note When this function returns #MBEDTLS_ERR_SSL_WANT_WRITE/READ, + * it must be called later with the *same* arguments, + * until it returns a value greater that or equal to 0. When + * the function returns #MBEDTLS_ERR_SSL_WANT_WRITE there may be + * some partial data in the output buffer, however this is not + * yet sent. + * + * \note If the requested length is greater than the maximum + * fragment length (either the built-in limit or the one set + * or negotiated with the peer), then: + * - with TLS, less bytes than requested are written. + * - with DTLS, MBEDTLS_ERR_SSL_BAD_INPUT_DATA is returned. + * \c mbedtls_ssl_get_output_max_frag_len() may be used to + * query the active maximum fragment length. + * + * \note Attempting to write 0 bytes will result in an empty TLS + * application record being sent. + */ +int mbedtls_ssl_write( mbedtls_ssl_context *ssl, const unsigned char *buf, size_t len ); + +/** + * \brief Send an alert message + * + * \param ssl SSL context + * \param level The alert level of the message + * (MBEDTLS_SSL_ALERT_LEVEL_WARNING or MBEDTLS_SSL_ALERT_LEVEL_FATAL) + * \param message The alert message (SSL_ALERT_MSG_*) + * + * \return 0 if successful, or a specific SSL error code. + * + * \note If this function returns something other than 0 or + * MBEDTLS_ERR_SSL_WANT_READ/WRITE, you must stop using + * the SSL context for reading or writing, and either free it or + * call \c mbedtls_ssl_session_reset() on it before re-using it + * for a new connection; the current connection must be closed. + */ +int mbedtls_ssl_send_alert_message( mbedtls_ssl_context *ssl, + unsigned char level, + unsigned char message ); +/** + * \brief Notify the peer that the connection is being closed + * + * \param ssl SSL context + * + * \return 0 if successful, or a specific SSL error code. + * + * \note If this function returns something other than 0 or + * MBEDTLS_ERR_SSL_WANT_READ/WRITE, you must stop using + * the SSL context for reading or writing, and either free it or + * call \c mbedtls_ssl_session_reset() on it before re-using it + * for a new connection; the current connection must be closed. + */ +int mbedtls_ssl_close_notify( mbedtls_ssl_context *ssl ); + +/** + * \brief Free referenced items in an SSL context and clear memory + * + * \param ssl SSL context + */ +void mbedtls_ssl_free( mbedtls_ssl_context *ssl ); + +#if defined(MBEDTLS_SSL_CONTEXT_SERIALIZATION) +/** + * \brief Save an active connection as serialized data in a buffer. + * This allows the freeing or re-using of the SSL context + * while still picking up the connection later in a way that + * it entirely transparent to the peer. + * + * \see mbedtls_ssl_context_load() + * + * \note This feature is currently only available under certain + * conditions, see the documentation of the return value + * #MBEDTLS_ERR_SSL_BAD_INPUT_DATA for details. + * + * \note When this function succeeds, it calls + * mbedtls_ssl_session_reset() on \p ssl which as a result is + * no longer associated with the connection that has been + * serialized. This avoids creating copies of the connection + * state. You're then free to either re-use the context + * structure for a different connection, or call + * mbedtls_ssl_free() on it. See the documentation of + * mbedtls_ssl_session_reset() for more details. + * + * \param ssl The SSL context to save. On success, it is no longer + * associated with the connection that has been serialized. + * \param buf The buffer to write the serialized data to. It must be a + * writeable buffer of at least \p buf_len bytes, or may be \c + * NULL if \p buf_len is \c 0. + * \param buf_len The number of bytes available for writing in \p buf. + * \param olen The size in bytes of the data that has been or would have + * been written. It must point to a valid \c size_t. + * + * \note \p olen is updated to the correct value regardless of + * whether \p buf_len was large enough. This makes it possible + * to determine the necessary size by calling this function + * with \p buf set to \c NULL and \p buf_len to \c 0. However, + * the value of \p olen is only guaranteed to be correct when + * the function returns #MBEDTLS_ERR_SSL_BUFFER_TOO_SMALL or + * \c 0. If the return value is different, then the value of + * \p olen is undefined. + * + * \return \c 0 if successful. + * \return #MBEDTLS_ERR_SSL_BUFFER_TOO_SMALL if \p buf is too small. + * \return #MBEDTLS_ERR_SSL_ALLOC_FAILED if memory allocation failed + * while reseting the context. + * \return #MBEDTLS_ERR_SSL_BAD_INPUT_DATA if a handshake is in + * progress, or there is pending data for reading or sending, + * or the connection does not use DTLS 1.2 with an AEAD + * ciphersuite, or renegotiation is enabled. + */ +int mbedtls_ssl_context_save( mbedtls_ssl_context *ssl, + unsigned char *buf, + size_t buf_len, + size_t *olen ); + +/** + * \brief Load serialized connection data to an SSL context. + * + * \see mbedtls_ssl_context_save() + * + * \warning The same serialized data must never be loaded into more + * that one context. In order to ensure that, after + * successfully loading serialized data to an SSL context, you + * should immediately destroy or invalidate all copies of the + * serialized data that was loaded. Loading the same data in + * more than one context would cause severe security failures + * including but not limited to loss of confidentiality. + * + * \note Before calling this function, the SSL context must be + * prepared in one of the two following ways. The first way is + * to take a context freshly initialised with + * mbedtls_ssl_init() and call mbedtls_ssl_setup() on it with + * the same ::mbedtls_ssl_config structure that was used in + * the original connection. The second way is to + * call mbedtls_ssl_session_reset() on a context that was + * previously prepared as above but used in the meantime. + * Either way, you must not use the context to perform a + * handshake between calling mbedtls_ssl_setup() or + * mbedtls_ssl_session_reset() and calling this function. You + * may however call other setter functions in that time frame + * as indicated in the note below. + * + * \note Before or after calling this function successfully, you + * also need to configure some connection-specific callbacks + * and settings before you can use the connection again + * (unless they were already set before calling + * mbedtls_ssl_session_reset() and the values are suitable for + * the present connection). Specifically, you want to call + * at least mbedtls_ssl_set_bio() and + * mbedtls_ssl_set_timer_cb(). All other SSL setter functions + * are not necessary to call, either because they're only used + * in handshakes, or because the setting is already saved. You + * might choose to call them anyway, for example in order to + * share code between the cases of establishing a new + * connection and the case of loading an already-established + * connection. + * + * \note If you have new information about the path MTU, you want to + * call mbedtls_ssl_set_mtu() after calling this function, as + * otherwise this function would overwrite your + * newly-configured value with the value that was active when + * the context was saved. + * + * \note When this function returns an error code, it calls + * mbedtls_ssl_free() on \p ssl. In this case, you need to + * prepare the context with the usual sequence starting with a + * call to mbedtls_ssl_init() if you want to use it again. + * + * \param ssl The SSL context structure to be populated. It must have + * been prepared as described in the note above. + * \param buf The buffer holding the serialized connection data. It must + * be a readable buffer of at least \p len bytes. + * \param len The size of the serialized data in bytes. + * + * \return \c 0 if successful. + * \return #MBEDTLS_ERR_SSL_ALLOC_FAILED if memory allocation failed. + * \return #MBEDTLS_ERR_SSL_VERSION_MISMATCH if the serialized data + * comes from a different Mbed TLS version or build. + * \return #MBEDTLS_ERR_SSL_BAD_INPUT_DATA if input data is invalid. + */ +int mbedtls_ssl_context_load( mbedtls_ssl_context *ssl, + const unsigned char *buf, + size_t len ); +#endif /* MBEDTLS_SSL_CONTEXT_SERIALIZATION */ + +/** + * \brief Initialize an SSL configuration context + * Just makes the context ready for + * mbedtls_ssl_config_defaults() or mbedtls_ssl_config_free(). + * + * \note You need to call mbedtls_ssl_config_defaults() unless you + * manually set all of the relevant fields yourself. + * + * \param conf SSL configuration context + */ +void mbedtls_ssl_config_init( mbedtls_ssl_config *conf ); + +/** + * \brief Load reasonnable default SSL configuration values. + * (You need to call mbedtls_ssl_config_init() first.) + * + * \param conf SSL configuration context + * \param endpoint MBEDTLS_SSL_IS_CLIENT or MBEDTLS_SSL_IS_SERVER + * \param transport MBEDTLS_SSL_TRANSPORT_STREAM for TLS, or + * MBEDTLS_SSL_TRANSPORT_DATAGRAM for DTLS + * \param preset a MBEDTLS_SSL_PRESET_XXX value + * + * \note See \c mbedtls_ssl_conf_transport() for notes on DTLS. + * + * \return 0 if successful, or + * MBEDTLS_ERR_XXX_ALLOC_FAILED on memory allocation error. + */ +int mbedtls_ssl_config_defaults( mbedtls_ssl_config *conf, + int endpoint, int transport, int preset ); + +/** + * \brief Free an SSL configuration context + * + * \param conf SSL configuration context + */ +void mbedtls_ssl_config_free( mbedtls_ssl_config *conf ); + +/** + * \brief Initialize SSL session structure + * + * \param session SSL session + */ +void mbedtls_ssl_session_init( mbedtls_ssl_session *session ); + +/** + * \brief Free referenced items in an SSL session including the + * peer certificate and clear memory + * + * \note A session object can be freed even if the SSL context + * that was used to retrieve the session is still in use. + * + * \param session SSL session + */ +void mbedtls_ssl_session_free( mbedtls_ssl_session *session ); + +/** + * \brief TLS-PRF function for key derivation. + * + * \param prf The tls_prf type function type to be used. + * \param secret Secret for the key derivation function. + * \param slen Length of the secret. + * \param label String label for the key derivation function, + * terminated with null character. + * \param random Random bytes. + * \param rlen Length of the random bytes buffer. + * \param dstbuf The buffer holding the derived key. + * \param dlen Length of the output buffer. + * + * \return 0 on success. An SSL specific error on failure. + */ +int mbedtls_ssl_tls_prf( const mbedtls_tls_prf_types prf, + const unsigned char *secret, size_t slen, + const char *label, + const unsigned char *random, size_t rlen, + unsigned char *dstbuf, size_t dlen ); + +#ifdef __cplusplus +} +#endif + +#endif /* ssl.h */ |