diff options
Diffstat (limited to 'lib/mbedtls-2.27.0/include/mbedtls/bignum.h')
| -rw-r--r-- | lib/mbedtls-2.27.0/include/mbedtls/bignum.h | 1055 |
1 files changed, 0 insertions, 1055 deletions
diff --git a/lib/mbedtls-2.27.0/include/mbedtls/bignum.h b/lib/mbedtls-2.27.0/include/mbedtls/bignum.h deleted file mode 100644 index f087035..0000000 --- a/lib/mbedtls-2.27.0/include/mbedtls/bignum.h +++ /dev/null @@ -1,1055 +0,0 @@ -/** - * \file bignum.h - * - * \brief Multi-precision integer library - */ -/* - * Copyright The Mbed TLS Contributors - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the "License"); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ -#ifndef MBEDTLS_BIGNUM_H -#define MBEDTLS_BIGNUM_H - -#if !defined(MBEDTLS_CONFIG_FILE) -#include "mbedtls/config.h" -#else -#include MBEDTLS_CONFIG_FILE -#endif - -#include <stddef.h> -#include <stdint.h> - -#if defined(MBEDTLS_FS_IO) -#include <stdio.h> -#endif - -#define MBEDTLS_ERR_MPI_FILE_IO_ERROR -0x0002 /**< An error occurred while reading from or writing to a file. */ -#define MBEDTLS_ERR_MPI_BAD_INPUT_DATA -0x0004 /**< Bad input parameters to function. */ -#define MBEDTLS_ERR_MPI_INVALID_CHARACTER -0x0006 /**< There is an invalid character in the digit string. */ -#define MBEDTLS_ERR_MPI_BUFFER_TOO_SMALL -0x0008 /**< The buffer is too small to write to. */ -#define MBEDTLS_ERR_MPI_NEGATIVE_VALUE -0x000A /**< The input arguments are negative or result in illegal output. */ -#define MBEDTLS_ERR_MPI_DIVISION_BY_ZERO -0x000C /**< The input argument for division is zero, which is not allowed. */ -#define MBEDTLS_ERR_MPI_NOT_ACCEPTABLE -0x000E /**< The input arguments are not acceptable. */ -#define MBEDTLS_ERR_MPI_ALLOC_FAILED -0x0010 /**< Memory allocation failed. */ - -#define MBEDTLS_MPI_CHK(f) \ - do \ - { \ - if( ( ret = (f) ) != 0 ) \ - goto cleanup; \ - } while( 0 ) - -/* - * Maximum size MPIs are allowed to grow to in number of limbs. - */ -#define MBEDTLS_MPI_MAX_LIMBS 10000 - -#if !defined(MBEDTLS_MPI_WINDOW_SIZE) -/* - * Maximum window size used for modular exponentiation. Default: 6 - * Minimum value: 1. Maximum value: 6. - * - * Result is an array of ( 2 ** MBEDTLS_MPI_WINDOW_SIZE ) MPIs used - * for the sliding window calculation. (So 64 by default) - * - * Reduction in size, reduces speed. - */ -#define MBEDTLS_MPI_WINDOW_SIZE 6 /**< Maximum window size used. */ -#endif /* !MBEDTLS_MPI_WINDOW_SIZE */ - -#if !defined(MBEDTLS_MPI_MAX_SIZE) -/* - * Maximum size of MPIs allowed in bits and bytes for user-MPIs. - * ( Default: 512 bytes => 4096 bits, Maximum tested: 2048 bytes => 16384 bits ) - * - * Note: Calculations can temporarily result in larger MPIs. So the number - * of limbs required (MBEDTLS_MPI_MAX_LIMBS) is higher. - */ -#define MBEDTLS_MPI_MAX_SIZE 1024 /**< Maximum number of bytes for usable MPIs. */ -#endif /* !MBEDTLS_MPI_MAX_SIZE */ - -#define MBEDTLS_MPI_MAX_BITS ( 8 * MBEDTLS_MPI_MAX_SIZE ) /**< Maximum number of bits for usable MPIs. */ - -/* - * When reading from files with mbedtls_mpi_read_file() and writing to files with - * mbedtls_mpi_write_file() the buffer should have space - * for a (short) label, the MPI (in the provided radix), the newline - * characters and the '\0'. - * - * By default we assume at least a 10 char label, a minimum radix of 10 - * (decimal) and a maximum of 4096 bit numbers (1234 decimal chars). - * Autosized at compile time for at least a 10 char label, a minimum radix - * of 10 (decimal) for a number of MBEDTLS_MPI_MAX_BITS size. - * - * This used to be statically sized to 1250 for a maximum of 4096 bit - * numbers (1234 decimal chars). - * - * Calculate using the formula: - * MBEDTLS_MPI_RW_BUFFER_SIZE = ceil(MBEDTLS_MPI_MAX_BITS / ln(10) * ln(2)) + - * LabelSize + 6 - */ -#define MBEDTLS_MPI_MAX_BITS_SCALE100 ( 100 * MBEDTLS_MPI_MAX_BITS ) -#define MBEDTLS_LN_2_DIV_LN_10_SCALE100 332 -#define MBEDTLS_MPI_RW_BUFFER_SIZE ( ((MBEDTLS_MPI_MAX_BITS_SCALE100 + MBEDTLS_LN_2_DIV_LN_10_SCALE100 - 1) / MBEDTLS_LN_2_DIV_LN_10_SCALE100) + 10 + 6 ) - -/* - * Define the base integer type, architecture-wise. - * - * 32 or 64-bit integer types can be forced regardless of the underlying - * architecture by defining MBEDTLS_HAVE_INT32 or MBEDTLS_HAVE_INT64 - * respectively and undefining MBEDTLS_HAVE_ASM. - * - * Double-width integers (e.g. 128-bit in 64-bit architectures) can be - * disabled by defining MBEDTLS_NO_UDBL_DIVISION. - */ -#if !defined(MBEDTLS_HAVE_INT32) - #if defined(_MSC_VER) && defined(_M_AMD64) - /* Always choose 64-bit when using MSC */ - #if !defined(MBEDTLS_HAVE_INT64) - #define MBEDTLS_HAVE_INT64 - #endif /* !MBEDTLS_HAVE_INT64 */ - typedef int64_t mbedtls_mpi_sint; - typedef uint64_t mbedtls_mpi_uint; - #elif defined(__GNUC__) && ( \ - defined(__amd64__) || defined(__x86_64__) || \ - defined(__ppc64__) || defined(__powerpc64__) || \ - defined(__ia64__) || defined(__alpha__) || \ - ( defined(__sparc__) && defined(__arch64__) ) || \ - defined(__s390x__) || defined(__mips64) || \ - defined(__aarch64__) ) - #if !defined(MBEDTLS_HAVE_INT64) - #define MBEDTLS_HAVE_INT64 - #endif /* MBEDTLS_HAVE_INT64 */ - typedef int64_t mbedtls_mpi_sint; - typedef uint64_t mbedtls_mpi_uint; - #if !defined(MBEDTLS_NO_UDBL_DIVISION) - /* mbedtls_t_udbl defined as 128-bit unsigned int */ - typedef unsigned int mbedtls_t_udbl __attribute__((mode(TI))); - #define MBEDTLS_HAVE_UDBL - #endif /* !MBEDTLS_NO_UDBL_DIVISION */ - #elif defined(__ARMCC_VERSION) && defined(__aarch64__) - /* - * __ARMCC_VERSION is defined for both armcc and armclang and - * __aarch64__ is only defined by armclang when compiling 64-bit code - */ - #if !defined(MBEDTLS_HAVE_INT64) - #define MBEDTLS_HAVE_INT64 - #endif /* !MBEDTLS_HAVE_INT64 */ - typedef int64_t mbedtls_mpi_sint; - typedef uint64_t mbedtls_mpi_uint; - #if !defined(MBEDTLS_NO_UDBL_DIVISION) - /* mbedtls_t_udbl defined as 128-bit unsigned int */ - typedef __uint128_t mbedtls_t_udbl; - #define MBEDTLS_HAVE_UDBL - #endif /* !MBEDTLS_NO_UDBL_DIVISION */ - #elif defined(MBEDTLS_HAVE_INT64) - /* Force 64-bit integers with unknown compiler */ - typedef int64_t mbedtls_mpi_sint; - typedef uint64_t mbedtls_mpi_uint; - #endif -#endif /* !MBEDTLS_HAVE_INT32 */ - -#if !defined(MBEDTLS_HAVE_INT64) - /* Default to 32-bit compilation */ - #if !defined(MBEDTLS_HAVE_INT32) - #define MBEDTLS_HAVE_INT32 - #endif /* !MBEDTLS_HAVE_INT32 */ - typedef int32_t mbedtls_mpi_sint; - typedef uint32_t mbedtls_mpi_uint; - #if !defined(MBEDTLS_NO_UDBL_DIVISION) - typedef uint64_t mbedtls_t_udbl; - #define MBEDTLS_HAVE_UDBL - #endif /* !MBEDTLS_NO_UDBL_DIVISION */ -#endif /* !MBEDTLS_HAVE_INT64 */ - -#ifdef __cplusplus -extern "C" { -#endif - -/** - * \brief MPI structure - */ -typedef struct mbedtls_mpi -{ - int s; /*!< Sign: -1 if the mpi is negative, 1 otherwise */ - size_t n; /*!< total # of limbs */ - mbedtls_mpi_uint *p; /*!< pointer to limbs */ -} -mbedtls_mpi; - -/** - * \brief Initialize an MPI context. - * - * This makes the MPI ready to be set or freed, - * but does not define a value for the MPI. - * - * \param X The MPI context to initialize. This must not be \c NULL. - */ -void mbedtls_mpi_init( mbedtls_mpi *X ); - -/** - * \brief This function frees the components of an MPI context. - * - * \param X The MPI context to be cleared. This may be \c NULL, - * in which case this function is a no-op. If it is - * not \c NULL, it must point to an initialized MPI. - */ -void mbedtls_mpi_free( mbedtls_mpi *X ); - -/** - * \brief Enlarge an MPI to the specified number of limbs. - * - * \note This function does nothing if the MPI is - * already large enough. - * - * \param X The MPI to grow. It must be initialized. - * \param nblimbs The target number of limbs. - * - * \return \c 0 if successful. - * \return #MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed. - * \return Another negative error code on other kinds of failure. - */ -int mbedtls_mpi_grow( mbedtls_mpi *X, size_t nblimbs ); - -/** - * \brief This function resizes an MPI downwards, keeping at least the - * specified number of limbs. - * - * If \c X is smaller than \c nblimbs, it is resized up - * instead. - * - * \param X The MPI to shrink. This must point to an initialized MPI. - * \param nblimbs The minimum number of limbs to keep. - * - * \return \c 0 if successful. - * \return #MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed - * (this can only happen when resizing up). - * \return Another negative error code on other kinds of failure. - */ -int mbedtls_mpi_shrink( mbedtls_mpi *X, size_t nblimbs ); - -/** - * \brief Make a copy of an MPI. - * - * \param X The destination MPI. This must point to an initialized MPI. - * \param Y The source MPI. This must point to an initialized MPI. - * - * \note The limb-buffer in the destination MPI is enlarged - * if necessary to hold the value in the source MPI. - * - * \return \c 0 if successful. - * \return #MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed. - * \return Another negative error code on other kinds of failure. - */ -int mbedtls_mpi_copy( mbedtls_mpi *X, const mbedtls_mpi *Y ); - -/** - * \brief Swap the contents of two MPIs. - * - * \param X The first MPI. It must be initialized. - * \param Y The second MPI. It must be initialized. - */ -void mbedtls_mpi_swap( mbedtls_mpi *X, mbedtls_mpi *Y ); - -/** - * \brief Perform a safe conditional copy of MPI which doesn't - * reveal whether the condition was true or not. - * - * \param X The MPI to conditionally assign to. This must point - * to an initialized MPI. - * \param Y The MPI to be assigned from. This must point to an - * initialized MPI. - * \param assign The condition deciding whether to perform the - * assignment or not. Possible values: - * * \c 1: Perform the assignment `X = Y`. - * * \c 0: Keep the original value of \p X. - * - * \note This function is equivalent to - * `if( assign ) mbedtls_mpi_copy( X, Y );` - * except that it avoids leaking any information about whether - * the assignment was done or not (the above code may leak - * information through branch prediction and/or memory access - * patterns analysis). - * - * \return \c 0 if successful. - * \return #MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed. - * \return Another negative error code on other kinds of failure. - */ -int mbedtls_mpi_safe_cond_assign( mbedtls_mpi *X, const mbedtls_mpi *Y, unsigned char assign ); - -/** - * \brief Perform a safe conditional swap which doesn't - * reveal whether the condition was true or not. - * - * \param X The first MPI. This must be initialized. - * \param Y The second MPI. This must be initialized. - * \param assign The condition deciding whether to perform - * the swap or not. Possible values: - * * \c 1: Swap the values of \p X and \p Y. - * * \c 0: Keep the original values of \p X and \p Y. - * - * \note This function is equivalent to - * if( assign ) mbedtls_mpi_swap( X, Y ); - * except that it avoids leaking any information about whether - * the assignment was done or not (the above code may leak - * information through branch prediction and/or memory access - * patterns analysis). - * - * \return \c 0 if successful. - * \return #MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed. - * \return Another negative error code on other kinds of failure. - * - */ -int mbedtls_mpi_safe_cond_swap( mbedtls_mpi *X, mbedtls_mpi *Y, unsigned char assign ); - -/** - * \brief Store integer value in MPI. - * - * \param X The MPI to set. This must be initialized. - * \param z The value to use. - * - * \return \c 0 if successful. - * \return #MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed. - * \return Another negative error code on other kinds of failure. - */ -int mbedtls_mpi_lset( mbedtls_mpi *X, mbedtls_mpi_sint z ); - -/** - * \brief Get a specific bit from an MPI. - * - * \param X The MPI to query. This must be initialized. - * \param pos Zero-based index of the bit to query. - * - * \return \c 0 or \c 1 on success, depending on whether bit \c pos - * of \c X is unset or set. - * \return A negative error code on failure. - */ -int mbedtls_mpi_get_bit( const mbedtls_mpi *X, size_t pos ); - -/** - * \brief Modify a specific bit in an MPI. - * - * \note This function will grow the target MPI if necessary to set a - * bit to \c 1 in a not yet existing limb. It will not grow if - * the bit should be set to \c 0. - * - * \param X The MPI to modify. This must be initialized. - * \param pos Zero-based index of the bit to modify. - * \param val The desired value of bit \c pos: \c 0 or \c 1. - * - * \return \c 0 if successful. - * \return #MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed. - * \return Another negative error code on other kinds of failure. - */ -int mbedtls_mpi_set_bit( mbedtls_mpi *X, size_t pos, unsigned char val ); - -/** - * \brief Return the number of bits of value \c 0 before the - * least significant bit of value \c 1. - * - * \note This is the same as the zero-based index of - * the least significant bit of value \c 1. - * - * \param X The MPI to query. - * - * \return The number of bits of value \c 0 before the least significant - * bit of value \c 1 in \p X. - */ -size_t mbedtls_mpi_lsb( const mbedtls_mpi *X ); - -/** - * \brief Return the number of bits up to and including the most - * significant bit of value \c 1. - * - * * \note This is same as the one-based index of the most - * significant bit of value \c 1. - * - * \param X The MPI to query. This must point to an initialized MPI. - * - * \return The number of bits up to and including the most - * significant bit of value \c 1. - */ -size_t mbedtls_mpi_bitlen( const mbedtls_mpi *X ); - -/** - * \brief Return the total size of an MPI value in bytes. - * - * \param X The MPI to use. This must point to an initialized MPI. - * - * \note The value returned by this function may be less than - * the number of bytes used to store \p X internally. - * This happens if and only if there are trailing bytes - * of value zero. - * - * \return The least number of bytes capable of storing - * the absolute value of \p X. - */ -size_t mbedtls_mpi_size( const mbedtls_mpi *X ); - -/** - * \brief Import an MPI from an ASCII string. - * - * \param X The destination MPI. This must point to an initialized MPI. - * \param radix The numeric base of the input string. - * \param s Null-terminated string buffer. - * - * \return \c 0 if successful. - * \return A negative error code on failure. - */ -int mbedtls_mpi_read_string( mbedtls_mpi *X, int radix, const char *s ); - -/** - * \brief Export an MPI to an ASCII string. - * - * \param X The source MPI. This must point to an initialized MPI. - * \param radix The numeric base of the output string. - * \param buf The buffer to write the string to. This must be writable - * buffer of length \p buflen Bytes. - * \param buflen The available size in Bytes of \p buf. - * \param olen The address at which to store the length of the string - * written, including the final \c NULL byte. This must - * not be \c NULL. - * - * \note You can call this function with `buflen == 0` to obtain the - * minimum required buffer size in `*olen`. - * - * \return \c 0 if successful. - * \return #MBEDTLS_ERR_MPI_BUFFER_TOO_SMALL if the target buffer \p buf - * is too small to hold the value of \p X in the desired base. - * In this case, `*olen` is nonetheless updated to contain the - * size of \p buf required for a successful call. - * \return Another negative error code on different kinds of failure. - */ -int mbedtls_mpi_write_string( const mbedtls_mpi *X, int radix, - char *buf, size_t buflen, size_t *olen ); - -#if defined(MBEDTLS_FS_IO) -/** - * \brief Read an MPI from a line in an opened file. - * - * \param X The destination MPI. This must point to an initialized MPI. - * \param radix The numeric base of the string representation used - * in the source line. - * \param fin The input file handle to use. This must not be \c NULL. - * - * \note On success, this function advances the file stream - * to the end of the current line or to EOF. - * - * The function returns \c 0 on an empty line. - * - * Leading whitespaces are ignored, as is a - * '0x' prefix for radix \c 16. - * - * \return \c 0 if successful. - * \return #MBEDTLS_ERR_MPI_BUFFER_TOO_SMALL if the file read buffer - * is too small. - * \return Another negative error code on failure. - */ -int mbedtls_mpi_read_file( mbedtls_mpi *X, int radix, FILE *fin ); - -/** - * \brief Export an MPI into an opened file. - * - * \param p A string prefix to emit prior to the MPI data. - * For example, this might be a label, or "0x" when - * printing in base \c 16. This may be \c NULL if no prefix - * is needed. - * \param X The source MPI. This must point to an initialized MPI. - * \param radix The numeric base to be used in the emitted string. - * \param fout The output file handle. This may be \c NULL, in which case - * the output is written to \c stdout. - * - * \return \c 0 if successful. - * \return A negative error code on failure. - */ -int mbedtls_mpi_write_file( const char *p, const mbedtls_mpi *X, - int radix, FILE *fout ); -#endif /* MBEDTLS_FS_IO */ - -/** - * \brief Import an MPI from unsigned big endian binary data. - * - * \param X The destination MPI. This must point to an initialized MPI. - * \param buf The input buffer. This must be a readable buffer of length - * \p buflen Bytes. - * \param buflen The length of the input buffer \p p in Bytes. - * - * \return \c 0 if successful. - * \return #MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed. - * \return Another negative error code on different kinds of failure. - */ -int mbedtls_mpi_read_binary( mbedtls_mpi *X, const unsigned char *buf, - size_t buflen ); - -/** - * \brief Import X from unsigned binary data, little endian - * - * \param X The destination MPI. This must point to an initialized MPI. - * \param buf The input buffer. This must be a readable buffer of length - * \p buflen Bytes. - * \param buflen The length of the input buffer \p p in Bytes. - * - * \return \c 0 if successful. - * \return #MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed. - * \return Another negative error code on different kinds of failure. - */ -int mbedtls_mpi_read_binary_le( mbedtls_mpi *X, - const unsigned char *buf, size_t buflen ); - -/** - * \brief Export X into unsigned binary data, big endian. - * Always fills the whole buffer, which will start with zeros - * if the number is smaller. - * - * \param X The source MPI. This must point to an initialized MPI. - * \param buf The output buffer. This must be a writable buffer of length - * \p buflen Bytes. - * \param buflen The size of the output buffer \p buf in Bytes. - * - * \return \c 0 if successful. - * \return #MBEDTLS_ERR_MPI_BUFFER_TOO_SMALL if \p buf isn't - * large enough to hold the value of \p X. - * \return Another negative error code on different kinds of failure. - */ -int mbedtls_mpi_write_binary( const mbedtls_mpi *X, unsigned char *buf, - size_t buflen ); - -/** - * \brief Export X into unsigned binary data, little endian. - * Always fills the whole buffer, which will end with zeros - * if the number is smaller. - * - * \param X The source MPI. This must point to an initialized MPI. - * \param buf The output buffer. This must be a writable buffer of length - * \p buflen Bytes. - * \param buflen The size of the output buffer \p buf in Bytes. - * - * \return \c 0 if successful. - * \return #MBEDTLS_ERR_MPI_BUFFER_TOO_SMALL if \p buf isn't - * large enough to hold the value of \p X. - * \return Another negative error code on different kinds of failure. - */ -int mbedtls_mpi_write_binary_le( const mbedtls_mpi *X, - unsigned char *buf, size_t buflen ); - -/** - * \brief Perform a left-shift on an MPI: X <<= count - * - * \param X The MPI to shift. This must point to an initialized MPI. - * \param count The number of bits to shift by. - * - * \return \c 0 if successful. - * \return #MBEDTLS_ERR_MPI_ALLOC_FAILED if a memory allocation failed. - * \return Another negative error code on different kinds of failure. - */ -int mbedtls_mpi_shift_l( mbedtls_mpi *X, size_t count ); - -/** - * \brief Perform a right-shift on an MPI: X >>= count - * - * \param X The MPI to shift. This must point to an initialized MPI. - * \param count The number of bits to shift by. - * - * \return \c 0 if successful. - * \return #MBEDTLS_ERR_MPI_ALLOC_FAILED if a memory allocation failed. - * \return Another negative error code on different kinds of failure. - */ -int mbedtls_mpi_shift_r( mbedtls_mpi *X, size_t count ); - -/** - * \brief Compare the absolute values of two MPIs. - * - * \param X The left-hand MPI. This must point to an initialized MPI. - * \param Y The right-hand MPI. This must point to an initialized MPI. - * - * \return \c 1 if `|X|` is greater than `|Y|`. - * \return \c -1 if `|X|` is lesser than `|Y|`. - * \return \c 0 if `|X|` is equal to `|Y|`. - */ -int mbedtls_mpi_cmp_abs( const mbedtls_mpi *X, const mbedtls_mpi *Y ); - -/** - * \brief Compare two MPIs. - * - * \param X The left-hand MPI. This must point to an initialized MPI. - * \param Y The right-hand MPI. This must point to an initialized MPI. - * - * \return \c 1 if \p X is greater than \p Y. - * \return \c -1 if \p X is lesser than \p Y. - * \return \c 0 if \p X is equal to \p Y. - */ -int mbedtls_mpi_cmp_mpi( const mbedtls_mpi *X, const mbedtls_mpi *Y ); - -/** - * \brief Check if an MPI is less than the other in constant time. - * - * \param X The left-hand MPI. This must point to an initialized MPI - * with the same allocated length as Y. - * \param Y The right-hand MPI. This must point to an initialized MPI - * with the same allocated length as X. - * \param ret The result of the comparison: - * \c 1 if \p X is less than \p Y. - * \c 0 if \p X is greater than or equal to \p Y. - * - * \return 0 on success. - * \return MBEDTLS_ERR_MPI_BAD_INPUT_DATA if the allocated length of - * the two input MPIs is not the same. - */ -int mbedtls_mpi_lt_mpi_ct( const mbedtls_mpi *X, const mbedtls_mpi *Y, - unsigned *ret ); - -/** - * \brief Compare an MPI with an integer. - * - * \param X The left-hand MPI. This must point to an initialized MPI. - * \param z The integer value to compare \p X to. - * - * \return \c 1 if \p X is greater than \p z. - * \return \c -1 if \p X is lesser than \p z. - * \return \c 0 if \p X is equal to \p z. - */ -int mbedtls_mpi_cmp_int( const mbedtls_mpi *X, mbedtls_mpi_sint z ); - -/** - * \brief Perform an unsigned addition of MPIs: X = |A| + |B| - * - * \param X The destination MPI. This must point to an initialized MPI. - * \param A The first summand. This must point to an initialized MPI. - * \param B The second summand. This must point to an initialized MPI. - * - * \return \c 0 if successful. - * \return #MBEDTLS_ERR_MPI_ALLOC_FAILED if a memory allocation failed. - * \return Another negative error code on different kinds of failure. - */ -int mbedtls_mpi_add_abs( mbedtls_mpi *X, const mbedtls_mpi *A, - const mbedtls_mpi *B ); - -/** - * \brief Perform an unsigned subtraction of MPIs: X = |A| - |B| - * - * \param X The destination MPI. This must point to an initialized MPI. - * \param A The minuend. This must point to an initialized MPI. - * \param B The subtrahend. This must point to an initialized MPI. - * - * \return \c 0 if successful. - * \return #MBEDTLS_ERR_MPI_NEGATIVE_VALUE if \p B is greater than \p A. - * \return Another negative error code on different kinds of failure. - * - */ -int mbedtls_mpi_sub_abs( mbedtls_mpi *X, const mbedtls_mpi *A, - const mbedtls_mpi *B ); - -/** - * \brief Perform a signed addition of MPIs: X = A + B - * - * \param X The destination MPI. This must point to an initialized MPI. - * \param A The first summand. This must point to an initialized MPI. - * \param B The second summand. This must point to an initialized MPI. - * - * \return \c 0 if successful. - * \return #MBEDTLS_ERR_MPI_ALLOC_FAILED if a memory allocation failed. - * \return Another negative error code on different kinds of failure. - */ -int mbedtls_mpi_add_mpi( mbedtls_mpi *X, const mbedtls_mpi *A, - const mbedtls_mpi *B ); - -/** - * \brief Perform a signed subtraction of MPIs: X = A - B - * - * \param X The destination MPI. This must point to an initialized MPI. - * \param A The minuend. This must point to an initialized MPI. - * \param B The subtrahend. This must point to an initialized MPI. - * - * \return \c 0 if successful. - * \return #MBEDTLS_ERR_MPI_ALLOC_FAILED if a memory allocation failed. - * \return Another negative error code on different kinds of failure. - */ -int mbedtls_mpi_sub_mpi( mbedtls_mpi *X, const mbedtls_mpi *A, - const mbedtls_mpi *B ); - -/** - * \brief Perform a signed addition of an MPI and an integer: X = A + b - * - * \param X The destination MPI. This must point to an initialized MPI. - * \param A The first summand. This must point to an initialized MPI. - * \param b The second summand. - * - * \return \c 0 if successful. - * \return #MBEDTLS_ERR_MPI_ALLOC_FAILED if a memory allocation failed. - * \return Another negative error code on different kinds of failure. - */ -int mbedtls_mpi_add_int( mbedtls_mpi *X, const mbedtls_mpi *A, - mbedtls_mpi_sint b ); - -/** - * \brief Perform a signed subtraction of an MPI and an integer: - * X = A - b - * - * \param X The destination MPI. This must point to an initialized MPI. - * \param A The minuend. This must point to an initialized MPI. - * \param b The subtrahend. - * - * \return \c 0 if successful. - * \return #MBEDTLS_ERR_MPI_ALLOC_FAILED if a memory allocation failed. - * \return Another negative error code on different kinds of failure. - */ -int mbedtls_mpi_sub_int( mbedtls_mpi *X, const mbedtls_mpi *A, - mbedtls_mpi_sint b ); - -/** - * \brief Perform a multiplication of two MPIs: X = A * B - * - * \param X The destination MPI. This must point to an initialized MPI. - * \param A The first factor. This must point to an initialized MPI. - * \param B The second factor. This must point to an initialized MPI. - * - * \return \c 0 if successful. - * \return #MBEDTLS_ERR_MPI_ALLOC_FAILED if a memory allocation failed. - * \return Another negative error code on different kinds of failure. - * - */ -int mbedtls_mpi_mul_mpi( mbedtls_mpi *X, const mbedtls_mpi *A, - const mbedtls_mpi *B ); - -/** - * \brief Perform a multiplication of an MPI with an unsigned integer: - * X = A * b - * - * \param X The destination MPI. This must point to an initialized MPI. - * \param A The first factor. This must point to an initialized MPI. - * \param b The second factor. - * - * \return \c 0 if successful. - * \return #MBEDTLS_ERR_MPI_ALLOC_FAILED if a memory allocation failed. - * \return Another negative error code on different kinds of failure. - * - */ -int mbedtls_mpi_mul_int( mbedtls_mpi *X, const mbedtls_mpi *A, - mbedtls_mpi_uint b ); - -/** - * \brief Perform a division with remainder of two MPIs: - * A = Q * B + R - * - * \param Q The destination MPI for the quotient. - * This may be \c NULL if the value of the - * quotient is not needed. - * \param R The destination MPI for the remainder value. - * This may be \c NULL if the value of the - * remainder is not needed. - * \param A The dividend. This must point to an initialized MPi. - * \param B The divisor. This must point to an initialized MPI. - * - * \return \c 0 if successful. - * \return #MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed. - * \return #MBEDTLS_ERR_MPI_DIVISION_BY_ZERO if \p B equals zero. - * \return Another negative error code on different kinds of failure. - */ -int mbedtls_mpi_div_mpi( mbedtls_mpi *Q, mbedtls_mpi *R, const mbedtls_mpi *A, - const mbedtls_mpi *B ); - -/** - * \brief Perform a division with remainder of an MPI by an integer: - * A = Q * b + R - * - * \param Q The destination MPI for the quotient. - * This may be \c NULL if the value of the - * quotient is not needed. - * \param R The destination MPI for the remainder value. - * This may be \c NULL if the value of the - * remainder is not needed. - * \param A The dividend. This must point to an initialized MPi. - * \param b The divisor. - * - * \return \c 0 if successful. - * \return #MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed. - * \return #MBEDTLS_ERR_MPI_DIVISION_BY_ZERO if \p b equals zero. - * \return Another negative error code on different kinds of failure. - */ -int mbedtls_mpi_div_int( mbedtls_mpi *Q, mbedtls_mpi *R, const mbedtls_mpi *A, - mbedtls_mpi_sint b ); - -/** - * \brief Perform a modular reduction. R = A mod B - * - * \param R The destination MPI for the residue value. - * This must point to an initialized MPI. - * \param A The MPI to compute the residue of. - * This must point to an initialized MPI. - * \param B The base of the modular reduction. - * This must point to an initialized MPI. - * - * \return \c 0 if successful. - * \return #MBEDTLS_ERR_MPI_ALLOC_FAILED if a memory allocation failed. - * \return #MBEDTLS_ERR_MPI_DIVISION_BY_ZERO if \p B equals zero. - * \return #MBEDTLS_ERR_MPI_NEGATIVE_VALUE if \p B is negative. - * \return Another negative error code on different kinds of failure. - * - */ -int mbedtls_mpi_mod_mpi( mbedtls_mpi *R, const mbedtls_mpi *A, - const mbedtls_mpi *B ); - -/** - * \brief Perform a modular reduction with respect to an integer. - * r = A mod b - * - * \param r The address at which to store the residue. - * This must not be \c NULL. - * \param A The MPI to compute the residue of. - * This must point to an initialized MPi. - * \param b The integer base of the modular reduction. - * - * \return \c 0 if successful. - * \return #MBEDTLS_ERR_MPI_ALLOC_FAILED if a memory allocation failed. - * \return #MBEDTLS_ERR_MPI_DIVISION_BY_ZERO if \p b equals zero. - * \return #MBEDTLS_ERR_MPI_NEGATIVE_VALUE if \p b is negative. - * \return Another negative error code on different kinds of failure. - */ -int mbedtls_mpi_mod_int( mbedtls_mpi_uint *r, const mbedtls_mpi *A, - mbedtls_mpi_sint b ); - -/** - * \brief Perform a sliding-window exponentiation: X = A^E mod N - * - * \param X The destination MPI. This must point to an initialized MPI. - * \param A The base of the exponentiation. - * This must point to an initialized MPI. - * \param E The exponent MPI. This must point to an initialized MPI. - * \param N The base for the modular reduction. This must point to an - * initialized MPI. - * \param _RR A helper MPI depending solely on \p N which can be used to - * speed-up multiple modular exponentiations for the same value - * of \p N. This may be \c NULL. If it is not \c NULL, it must - * point to an initialized MPI. If it hasn't been used after - * the call to mbedtls_mpi_init(), this function will compute - * the helper value and store it in \p _RR for reuse on - * subsequent calls to this function. Otherwise, the function - * will assume that \p _RR holds the helper value set by a - * previous call to mbedtls_mpi_exp_mod(), and reuse it. - * - * \return \c 0 if successful. - * \return #MBEDTLS_ERR_MPI_ALLOC_FAILED if a memory allocation failed. - * \return #MBEDTLS_ERR_MPI_BAD_INPUT_DATA if \c N is negative or - * even, or if \c E is negative. - * \return Another negative error code on different kinds of failures. - * - */ -int mbedtls_mpi_exp_mod( mbedtls_mpi *X, const mbedtls_mpi *A, - const mbedtls_mpi *E, const mbedtls_mpi *N, - mbedtls_mpi *_RR ); - -/** - * \brief Fill an MPI with a number of random bytes. - * - * \param X The destination MPI. This must point to an initialized MPI. - * \param size The number of random bytes to generate. - * \param f_rng The RNG function to use. This must not be \c NULL. - * \param p_rng The RNG parameter to be passed to \p f_rng. This may be - * \c NULL if \p f_rng doesn't need a context argument. - * - * \return \c 0 if successful. - * \return #MBEDTLS_ERR_MPI_ALLOC_FAILED if a memory allocation failed. - * \return Another negative error code on failure. - * - * \note The bytes obtained from the RNG are interpreted - * as a big-endian representation of an MPI; this can - * be relevant in applications like deterministic ECDSA. - */ -int mbedtls_mpi_fill_random( mbedtls_mpi *X, size_t size, - int (*f_rng)(void *, unsigned char *, size_t), - void *p_rng ); - -/** Generate a random number uniformly in a range. - * - * This function generates a random number between \p min inclusive and - * \p N exclusive. - * - * The procedure complies with RFC 6979 ยง3.3 (deterministic ECDSA) - * when the RNG is a suitably parametrized instance of HMAC_DRBG - * and \p min is \c 1. - * - * \note There are `N - min` possible outputs. The lower bound - * \p min can be reached, but the upper bound \p N cannot. - * - * \param X The destination MPI. This must point to an initialized MPI. - * \param min The minimum value to return. - * It must be nonnegative. - * \param N The upper bound of the range, exclusive. - * In other words, this is one plus the maximum value to return. - * \p N must be strictly larger than \p min. - * \param f_rng The RNG function to use. This must not be \c NULL. - * \param p_rng The RNG parameter to be passed to \p f_rng. - * - * \return \c 0 if successful. - * \return #MBEDTLS_ERR_MPI_ALLOC_FAILED if a memory allocation failed. - * \return #MBEDTLS_ERR_MPI_BAD_INPUT_DATA if \p min or \p N is invalid - * or if they are incompatible. - * \return #MBEDTLS_ERR_MPI_NOT_ACCEPTABLE if the implementation was - * unable to find a suitable value within a limited number - * of attempts. This has a negligible probability if \p N - * is significantly larger than \p min, which is the case - * for all usual cryptographic applications. - * \return Another negative error code on failure. - */ -int mbedtls_mpi_random( mbedtls_mpi *X, - mbedtls_mpi_sint min, - const mbedtls_mpi *N, - int (*f_rng)(void *, unsigned char *, size_t), - void *p_rng ); - -/** - * \brief Compute the greatest common divisor: G = gcd(A, B) - * - * \param G The destination MPI. This must point to an initialized MPI. - * \param A The first operand. This must point to an initialized MPI. - * \param B The second operand. This must point to an initialized MPI. - * - * \return \c 0 if successful. - * \return #MBEDTLS_ERR_MPI_ALLOC_FAILED if a memory allocation failed. - * \return Another negative error code on different kinds of failure. - */ -int mbedtls_mpi_gcd( mbedtls_mpi *G, const mbedtls_mpi *A, - const mbedtls_mpi *B ); - -/** - * \brief Compute the modular inverse: X = A^-1 mod N - * - * \param X The destination MPI. This must point to an initialized MPI. - * \param A The MPI to calculate the modular inverse of. This must point - * to an initialized MPI. - * \param N The base of the modular inversion. This must point to an - * initialized MPI. - * - * \return \c 0 if successful. - * \return #MBEDTLS_ERR_MPI_ALLOC_FAILED if a memory allocation failed. - * \return #MBEDTLS_ERR_MPI_BAD_INPUT_DATA if \p N is less than - * or equal to one. - * \return #MBEDTLS_ERR_MPI_NOT_ACCEPTABLE if \p has no modular inverse - * with respect to \p N. - */ -int mbedtls_mpi_inv_mod( mbedtls_mpi *X, const mbedtls_mpi *A, - const mbedtls_mpi *N ); - -#if !defined(MBEDTLS_DEPRECATED_REMOVED) -#if defined(MBEDTLS_DEPRECATED_WARNING) -#define MBEDTLS_DEPRECATED __attribute__((deprecated)) -#else -#define MBEDTLS_DEPRECATED -#endif -/** - * \brief Perform a Miller-Rabin primality test with error - * probability of 2<sup>-80</sup>. - * - * \deprecated Superseded by mbedtls_mpi_is_prime_ext() which allows - * specifying the number of Miller-Rabin rounds. - * - * \param X The MPI to check for primality. - * This must point to an initialized MPI. - * \param f_rng The RNG function to use. This must not be \c NULL. - * \param p_rng The RNG parameter to be passed to \p f_rng. - * This may be \c NULL if \p f_rng doesn't use a - * context parameter. - * - * \return \c 0 if successful, i.e. \p X is probably prime. - * \return #MBEDTLS_ERR_MPI_ALLOC_FAILED if a memory allocation failed. - * \return #MBEDTLS_ERR_MPI_NOT_ACCEPTABLE if \p X is not prime. - * \return Another negative error code on other kinds of failure. - */ -MBEDTLS_DEPRECATED int mbedtls_mpi_is_prime( const mbedtls_mpi *X, - int (*f_rng)(void *, unsigned char *, size_t), - void *p_rng ); -#undef MBEDTLS_DEPRECATED -#endif /* !MBEDTLS_DEPRECATED_REMOVED */ - -/** - * \brief Miller-Rabin primality test. - * - * \warning If \p X is potentially generated by an adversary, for example - * when validating cryptographic parameters that you didn't - * generate yourself and that are supposed to be prime, then - * \p rounds should be at least the half of the security - * strength of the cryptographic algorithm. On the other hand, - * if \p X is chosen uniformly or non-adversially (as is the - * case when mbedtls_mpi_gen_prime calls this function), then - * \p rounds can be much lower. - * - * \param X The MPI to check for primality. - * This must point to an initialized MPI. - * \param rounds The number of bases to perform the Miller-Rabin primality - * test for. The probability of returning 0 on a composite is - * at most 2<sup>-2*\p rounds</sup>. - * \param f_rng The RNG function to use. This must not be \c NULL. - * \param p_rng The RNG parameter to be passed to \p f_rng. - * This may be \c NULL if \p f_rng doesn't use - * a context parameter. - * - * \return \c 0 if successful, i.e. \p X is probably prime. - * \return #MBEDTLS_ERR_MPI_ALLOC_FAILED if a memory allocation failed. - * \return #MBEDTLS_ERR_MPI_NOT_ACCEPTABLE if \p X is not prime. - * \return Another negative error code on other kinds of failure. - */ -int mbedtls_mpi_is_prime_ext( const mbedtls_mpi *X, int rounds, - int (*f_rng)(void *, unsigned char *, size_t), - void *p_rng ); -/** - * \brief Flags for mbedtls_mpi_gen_prime() - * - * Each of these flags is a constraint on the result X returned by - * mbedtls_mpi_gen_prime(). - */ -typedef enum { - MBEDTLS_MPI_GEN_PRIME_FLAG_DH = 0x0001, /**< (X-1)/2 is prime too */ - MBEDTLS_MPI_GEN_PRIME_FLAG_LOW_ERR = 0x0002, /**< lower error rate from 2<sup>-80</sup> to 2<sup>-128</sup> */ -} mbedtls_mpi_gen_prime_flag_t; - -/** - * \brief Generate a prime number. - * - * \param X The destination MPI to store the generated prime in. - * This must point to an initialized MPi. - * \param nbits The required size of the destination MPI in bits. - * This must be between \c 3 and #MBEDTLS_MPI_MAX_BITS. - * \param flags A mask of flags of type #mbedtls_mpi_gen_prime_flag_t. - * \param f_rng The RNG function to use. This must not be \c NULL. - * \param p_rng The RNG parameter to be passed to \p f_rng. - * This may be \c NULL if \p f_rng doesn't use - * a context parameter. - * - * \return \c 0 if successful, in which case \p X holds a - * probably prime number. - * \return #MBEDTLS_ERR_MPI_ALLOC_FAILED if a memory allocation failed. - * \return #MBEDTLS_ERR_MPI_BAD_INPUT_DATA if `nbits` is not between - * \c 3 and #MBEDTLS_MPI_MAX_BITS. - */ -int mbedtls_mpi_gen_prime( mbedtls_mpi *X, size_t nbits, int flags, - int (*f_rng)(void *, unsigned char *, size_t), - void *p_rng ); - -#if defined(MBEDTLS_SELF_TEST) - -/** - * \brief Checkup routine - * - * \return 0 if successful, or 1 if the test failed - */ -int mbedtls_mpi_self_test( int verbose ); - -#endif /* MBEDTLS_SELF_TEST */ - -#ifdef __cplusplus -} -#endif - -#endif /* bignum.h */ |