diff options
Diffstat (limited to 'lib/mbedtls-2.27.0/include/mbedtls/aria.h')
| -rw-r--r-- | lib/mbedtls-2.27.0/include/mbedtls/aria.h | 369 |
1 files changed, 369 insertions, 0 deletions
diff --git a/lib/mbedtls-2.27.0/include/mbedtls/aria.h b/lib/mbedtls-2.27.0/include/mbedtls/aria.h new file mode 100644 index 0000000..6c73d10 --- /dev/null +++ b/lib/mbedtls-2.27.0/include/mbedtls/aria.h @@ -0,0 +1,369 @@ +/** + * \file aria.h + * + * \brief ARIA block cipher + * + * The ARIA algorithm is a symmetric block cipher that can encrypt and + * decrypt information. It is defined by the Korean Agency for + * Technology and Standards (KATS) in <em>KS X 1213:2004</em> (in + * Korean, but see http://210.104.33.10/ARIA/index-e.html in English) + * and also described by the IETF in <em>RFC 5794</em>. + */ +/* + * Copyright The Mbed TLS Contributors + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#ifndef MBEDTLS_ARIA_H +#define MBEDTLS_ARIA_H + +#if !defined(MBEDTLS_CONFIG_FILE) +#include "mbedtls/config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif + +#include <stddef.h> +#include <stdint.h> + +#include "mbedtls/platform_util.h" + +#define MBEDTLS_ARIA_ENCRYPT 1 /**< ARIA encryption. */ +#define MBEDTLS_ARIA_DECRYPT 0 /**< ARIA decryption. */ + +#define MBEDTLS_ARIA_BLOCKSIZE 16 /**< ARIA block size in bytes. */ +#define MBEDTLS_ARIA_MAX_ROUNDS 16 /**< Maxiumum number of rounds in ARIA. */ +#define MBEDTLS_ARIA_MAX_KEYSIZE 32 /**< Maximum size of an ARIA key in bytes. */ + +#if !defined(MBEDTLS_DEPRECATED_REMOVED) +#define MBEDTLS_ERR_ARIA_INVALID_KEY_LENGTH MBEDTLS_DEPRECATED_NUMERIC_CONSTANT( -0x005C ) +#endif /* !MBEDTLS_DEPRECATED_REMOVED */ +#define MBEDTLS_ERR_ARIA_BAD_INPUT_DATA -0x005C /**< Bad input data. */ + +#define MBEDTLS_ERR_ARIA_INVALID_INPUT_LENGTH -0x005E /**< Invalid data input length. */ + +/* MBEDTLS_ERR_ARIA_FEATURE_UNAVAILABLE is deprecated and should not be used. + */ +#define MBEDTLS_ERR_ARIA_FEATURE_UNAVAILABLE -0x005A /**< Feature not available. For example, an unsupported ARIA key size. */ + +/* MBEDTLS_ERR_ARIA_HW_ACCEL_FAILED is deprecated and should not be used. */ +#define MBEDTLS_ERR_ARIA_HW_ACCEL_FAILED -0x0058 /**< ARIA hardware accelerator failed. */ + +#ifdef __cplusplus +extern "C" { +#endif + +#if !defined(MBEDTLS_ARIA_ALT) +// Regular implementation +// + +/** + * \brief The ARIA context-type definition. + */ +typedef struct mbedtls_aria_context +{ + unsigned char nr; /*!< The number of rounds (12, 14 or 16) */ + /*! The ARIA round keys. */ + uint32_t rk[MBEDTLS_ARIA_MAX_ROUNDS + 1][MBEDTLS_ARIA_BLOCKSIZE / 4]; +} +mbedtls_aria_context; + +#else /* MBEDTLS_ARIA_ALT */ +#include "aria_alt.h" +#endif /* MBEDTLS_ARIA_ALT */ + +/** + * \brief This function initializes the specified ARIA context. + * + * It must be the first API called before using + * the context. + * + * \param ctx The ARIA context to initialize. This must not be \c NULL. + */ +void mbedtls_aria_init( mbedtls_aria_context *ctx ); + +/** + * \brief This function releases and clears the specified ARIA context. + * + * \param ctx The ARIA context to clear. This may be \c NULL, in which + * case this function returns immediately. If it is not \c NULL, + * it must point to an initialized ARIA context. + */ +void mbedtls_aria_free( mbedtls_aria_context *ctx ); + +/** + * \brief This function sets the encryption key. + * + * \param ctx The ARIA context to which the key should be bound. + * This must be initialized. + * \param key The encryption key. This must be a readable buffer + * of size \p keybits Bits. + * \param keybits The size of \p key in Bits. Valid options are: + * <ul><li>128 bits</li> + * <li>192 bits</li> + * <li>256 bits</li></ul> + * + * \return \c 0 on success. + * \return A negative error code on failure. + */ +int mbedtls_aria_setkey_enc( mbedtls_aria_context *ctx, + const unsigned char *key, + unsigned int keybits ); + +/** + * \brief This function sets the decryption key. + * + * \param ctx The ARIA context to which the key should be bound. + * This must be initialized. + * \param key The decryption key. This must be a readable buffer + * of size \p keybits Bits. + * \param keybits The size of data passed. Valid options are: + * <ul><li>128 bits</li> + * <li>192 bits</li> + * <li>256 bits</li></ul> + * + * \return \c 0 on success. + * \return A negative error code on failure. + */ +int mbedtls_aria_setkey_dec( mbedtls_aria_context *ctx, + const unsigned char *key, + unsigned int keybits ); + +/** + * \brief This function performs an ARIA single-block encryption or + * decryption operation. + * + * It performs encryption or decryption (depending on whether + * the key was set for encryption on decryption) on the input + * data buffer defined in the \p input parameter. + * + * mbedtls_aria_init(), and either mbedtls_aria_setkey_enc() or + * mbedtls_aria_setkey_dec() must be called before the first + * call to this API with the same context. + * + * \param ctx The ARIA context to use for encryption or decryption. + * This must be initialized and bound to a key. + * \param input The 16-Byte buffer holding the input data. + * \param output The 16-Byte buffer holding the output data. + + * \return \c 0 on success. + * \return A negative error code on failure. + */ +int mbedtls_aria_crypt_ecb( mbedtls_aria_context *ctx, + const unsigned char input[MBEDTLS_ARIA_BLOCKSIZE], + unsigned char output[MBEDTLS_ARIA_BLOCKSIZE] ); + +#if defined(MBEDTLS_CIPHER_MODE_CBC) +/** + * \brief This function performs an ARIA-CBC encryption or decryption operation + * on full blocks. + * + * It performs the operation defined in the \p mode + * parameter (encrypt/decrypt), on the input data buffer defined in + * the \p input parameter. + * + * It can be called as many times as needed, until all the input + * data is processed. mbedtls_aria_init(), and either + * mbedtls_aria_setkey_enc() or mbedtls_aria_setkey_dec() must be called + * before the first call to this API with the same context. + * + * \note This function operates on aligned blocks, that is, the input size + * must be a multiple of the ARIA block size of 16 Bytes. + * + * \note Upon exit, the content of the IV is updated so that you can + * call the same function again on the next + * block(s) of data and get the same result as if it was + * encrypted in one call. This allows a "streaming" usage. + * If you need to retain the contents of the IV, you should + * either save it manually or use the cipher module instead. + * + * + * \param ctx The ARIA context to use for encryption or decryption. + * This must be initialized and bound to a key. + * \param mode The mode of operation. This must be either + * #MBEDTLS_ARIA_ENCRYPT for encryption, or + * #MBEDTLS_ARIA_DECRYPT for decryption. + * \param length The length of the input data in Bytes. This must be a + * multiple of the block size (16 Bytes). + * \param iv Initialization vector (updated after use). + * This must be a readable buffer of size 16 Bytes. + * \param input The buffer holding the input data. This must + * be a readable buffer of length \p length Bytes. + * \param output The buffer holding the output data. This must + * be a writable buffer of length \p length Bytes. + * + * \return \c 0 on success. + * \return A negative error code on failure. + */ +int mbedtls_aria_crypt_cbc( mbedtls_aria_context *ctx, + int mode, + size_t length, + unsigned char iv[MBEDTLS_ARIA_BLOCKSIZE], + const unsigned char *input, + unsigned char *output ); +#endif /* MBEDTLS_CIPHER_MODE_CBC */ + +#if defined(MBEDTLS_CIPHER_MODE_CFB) +/** + * \brief This function performs an ARIA-CFB128 encryption or decryption + * operation. + * + * It performs the operation defined in the \p mode + * parameter (encrypt or decrypt), on the input data buffer + * defined in the \p input parameter. + * + * For CFB, you must set up the context with mbedtls_aria_setkey_enc(), + * regardless of whether you are performing an encryption or decryption + * operation, that is, regardless of the \p mode parameter. This is + * because CFB mode uses the same key schedule for encryption and + * decryption. + * + * \note Upon exit, the content of the IV is updated so that you can + * call the same function again on the next + * block(s) of data and get the same result as if it was + * encrypted in one call. This allows a "streaming" usage. + * If you need to retain the contents of the + * IV, you must either save it manually or use the cipher + * module instead. + * + * + * \param ctx The ARIA context to use for encryption or decryption. + * This must be initialized and bound to a key. + * \param mode The mode of operation. This must be either + * #MBEDTLS_ARIA_ENCRYPT for encryption, or + * #MBEDTLS_ARIA_DECRYPT for decryption. + * \param length The length of the input data \p input in Bytes. + * \param iv_off The offset in IV (updated after use). + * This must not be larger than 15. + * \param iv The initialization vector (updated after use). + * This must be a readable buffer of size 16 Bytes. + * \param input The buffer holding the input data. This must + * be a readable buffer of length \p length Bytes. + * \param output The buffer holding the output data. This must + * be a writable buffer of length \p length Bytes. + * + * \return \c 0 on success. + * \return A negative error code on failure. + */ +int mbedtls_aria_crypt_cfb128( mbedtls_aria_context *ctx, + int mode, + size_t length, + size_t *iv_off, + unsigned char iv[MBEDTLS_ARIA_BLOCKSIZE], + const unsigned char *input, + unsigned char *output ); +#endif /* MBEDTLS_CIPHER_MODE_CFB */ + +#if defined(MBEDTLS_CIPHER_MODE_CTR) +/** + * \brief This function performs an ARIA-CTR encryption or decryption + * operation. + * + * This function performs the operation defined in the \p mode + * parameter (encrypt/decrypt), on the input data buffer + * defined in the \p input parameter. + * + * Due to the nature of CTR, you must use the same key schedule + * for both encryption and decryption operations. Therefore, you + * must use the context initialized with mbedtls_aria_setkey_enc() + * for both #MBEDTLS_ARIA_ENCRYPT and #MBEDTLS_ARIA_DECRYPT. + * + * \warning You must never reuse a nonce value with the same key. Doing so + * would void the encryption for the two messages encrypted with + * the same nonce and key. + * + * There are two common strategies for managing nonces with CTR: + * + * 1. You can handle everything as a single message processed over + * successive calls to this function. In that case, you want to + * set \p nonce_counter and \p nc_off to 0 for the first call, and + * then preserve the values of \p nonce_counter, \p nc_off and \p + * stream_block across calls to this function as they will be + * updated by this function. + * + * With this strategy, you must not encrypt more than 2**128 + * blocks of data with the same key. + * + * 2. You can encrypt separate messages by dividing the \p + * nonce_counter buffer in two areas: the first one used for a + * per-message nonce, handled by yourself, and the second one + * updated by this function internally. + * + * For example, you might reserve the first 12 bytes for the + * per-message nonce, and the last 4 bytes for internal use. In that + * case, before calling this function on a new message you need to + * set the first 12 bytes of \p nonce_counter to your chosen nonce + * value, the last 4 to 0, and \p nc_off to 0 (which will cause \p + * stream_block to be ignored). That way, you can encrypt at most + * 2**96 messages of up to 2**32 blocks each with the same key. + * + * The per-message nonce (or information sufficient to reconstruct + * it) needs to be communicated with the ciphertext and must be unique. + * The recommended way to ensure uniqueness is to use a message + * counter. An alternative is to generate random nonces, but this + * limits the number of messages that can be securely encrypted: + * for example, with 96-bit random nonces, you should not encrypt + * more than 2**32 messages with the same key. + * + * Note that for both stategies, sizes are measured in blocks and + * that an ARIA block is 16 bytes. + * + * \warning Upon return, \p stream_block contains sensitive data. Its + * content must not be written to insecure storage and should be + * securely discarded as soon as it's no longer needed. + * + * \param ctx The ARIA context to use for encryption or decryption. + * This must be initialized and bound to a key. + * \param length The length of the input data \p input in Bytes. + * \param nc_off The offset in Bytes in the current \p stream_block, + * for resuming within the current cipher stream. The + * offset pointer should be \c 0 at the start of a + * stream. This must not be larger than \c 15 Bytes. + * \param nonce_counter The 128-bit nonce and counter. This must point to + * a read/write buffer of length \c 16 bytes. + * \param stream_block The saved stream block for resuming. This must + * point to a read/write buffer of length \c 16 bytes. + * This is overwritten by the function. + * \param input The buffer holding the input data. This must + * be a readable buffer of length \p length Bytes. + * \param output The buffer holding the output data. This must + * be a writable buffer of length \p length Bytes. + * + * \return \c 0 on success. + * \return A negative error code on failure. + */ +int mbedtls_aria_crypt_ctr( mbedtls_aria_context *ctx, + size_t length, + size_t *nc_off, + unsigned char nonce_counter[MBEDTLS_ARIA_BLOCKSIZE], + unsigned char stream_block[MBEDTLS_ARIA_BLOCKSIZE], + const unsigned char *input, + unsigned char *output ); +#endif /* MBEDTLS_CIPHER_MODE_CTR */ + +#if defined(MBEDTLS_SELF_TEST) +/** + * \brief Checkup routine. + * + * \return \c 0 on success, or \c 1 on failure. + */ +int mbedtls_aria_self_test( int verbose ); +#endif /* MBEDTLS_SELF_TEST */ + +#ifdef __cplusplus +} +#endif + +#endif /* aria.h */ |