Removed old mbedtls, replacing with submodule.

1 files changed, 0 insertions, 272 deletions

diff --git a/lib/mbedtls-2.27.0/library/psa_crypto_hash.h b/lib/mbedtls-2.27.0/library/psa_crypto_hash.h
deleted file mode 100644
index eb70512..0000000
--- a/lib/mbedtls-2.27.0/library/psa_crypto_hash.h
+++ /dev/null
@@ -1,272 +0,0 @@
-/*
- *  PSA hashing layer on top of Mbed TLS software crypto
- */
-/*
- *  Copyright The Mbed TLS Contributors
- *  SPDX-License-Identifier: Apache-2.0
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may
- *  not use this file except in compliance with the License.
- *  You may obtain a copy of the License at
- *
- *  http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software
- *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
- *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- *  See the License for the specific language governing permissions and
- *  limitations under the License.
- */
-
-#ifndef PSA_CRYPTO_HASH_H
-#define PSA_CRYPTO_HASH_H
-
-#include <psa/crypto.h>
-
-#include <mbedtls/md_internal.h>
-
-/** Get Mbed TLS MD information of a hash algorithm given its PSA identifier
- *
- * \param[in] alg  PSA hash algorithm identifier
- *
- * \return  The Mbed TLS MD information of the hash algorithm. \c NULL if the
- *          PSA hash algorithm is not supported.
- */
-const mbedtls_md_info_t *mbedtls_md_info_from_psa( psa_algorithm_t alg );
-
-/** Calculate the hash (digest) of a message using Mbed TLS routines.
- *
- * \note The signature of this function is that of a PSA driver hash_compute
- *       entry point. This function behaves as a hash_compute entry point as
- *       defined in the PSA driver interface specification for transparent
- *       drivers.
- *
- * \param alg               The hash algorithm to compute (\c PSA_ALG_XXX value
- *                          such that #PSA_ALG_IS_HASH(\p alg) is true).
- * \param[in] input         Buffer containing the message to hash.
- * \param input_length      Size of the \p input buffer in bytes.
- * \param[out] hash         Buffer where the hash is to be written.
- * \param hash_size         Size of the \p hash buffer in bytes.
- * \param[out] hash_length  On success, the number of bytes
- *                          that make up the hash value. This is always
- *                          #PSA_HASH_LENGTH(\p alg).
- *
- * \retval #PSA_SUCCESS
- *         Success.
- * \retval #PSA_ERROR_NOT_SUPPORTED
- *         \p alg is not supported
- * \retval #PSA_ERROR_BUFFER_TOO_SMALL
- *         \p hash_size is too small
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
- */
-psa_status_t mbedtls_psa_hash_compute(
-    psa_algorithm_t alg,
-    const uint8_t *input,
-    size_t input_length,
-    uint8_t *hash,
-    size_t hash_size,
-    size_t *hash_length);
-
-/** Set up a multipart hash operation using Mbed TLS routines.
- *
- * \note The signature of this function is that of a PSA driver hash_setup
- *       entry point. This function behaves as a hash_setup entry point as
- *       defined in the PSA driver interface specification for transparent
- *       drivers.
- *
- * If an error occurs at any step after a call to mbedtls_psa_hash_setup(), the
- * operation will need to be reset by a call to mbedtls_psa_hash_abort(). The
- * core may call mbedtls_psa_hash_abort() at any time after the operation
- * has been initialized.
- *
- * After a successful call to mbedtls_psa_hash_setup(), the core must
- * eventually terminate the operation. The following events terminate an
- * operation:
- * - A successful call to mbedtls_psa_hash_finish() or mbedtls_psa_hash_verify().
- * - A call to mbedtls_psa_hash_abort().
- *
- * \param[in,out] operation The operation object to set up. It must have
- *                          been initialized to all-zero and not yet be in use.
- * \param alg               The hash algorithm to compute (\c PSA_ALG_XXX value
- *                          such that #PSA_ALG_IS_HASH(\p alg) is true).
- *
- * \retval #PSA_SUCCESS
- *         Success.
- * \retval #PSA_ERROR_NOT_SUPPORTED
- *         \p alg is not supported
- * \retval #PSA_ERROR_BAD_STATE
- *         The operation state is not valid (it must be inactive).
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
- */
-psa_status_t mbedtls_psa_hash_setup(
-    mbedtls_psa_hash_operation_t *operation,
-    psa_algorithm_t alg );
-
-/** Clone an Mbed TLS hash operation.
- *
- * \note The signature of this function is that of a PSA driver hash_clone
- *       entry point. This function behaves as a hash_clone entry point as
- *       defined in the PSA driver interface specification for transparent
- *       drivers.
- *
- * This function copies the state of an ongoing hash operation to
- * a new operation object. In other words, this function is equivalent
- * to calling mbedtls_psa_hash_setup() on \p target_operation with the same
- * algorithm that \p source_operation was set up for, then
- * mbedtls_psa_hash_update() on \p target_operation with the same input that
- * that was passed to \p source_operation. After this function returns, the
- * two objects are independent, i.e. subsequent calls involving one of
- * the objects do not affect the other object.
- *
- * \param[in] source_operation      The active hash operation to clone.
- * \param[in,out] target_operation  The operation object to set up.
- *                                  It must be initialized but not active.
- *
- * \retval #PSA_SUCCESS
- * \retval #PSA_ERROR_BAD_STATE
- *         The \p source_operation state is not valid (it must be active).
- * \retval #PSA_ERROR_BAD_STATE
- *         The \p target_operation state is not valid (it must be inactive).
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
- */
-psa_status_t mbedtls_psa_hash_clone(
-    const mbedtls_psa_hash_operation_t *source_operation,
-    mbedtls_psa_hash_operation_t *target_operation );
-
-/** Add a message fragment to a multipart Mbed TLS hash operation.
- *
- * \note The signature of this function is that of a PSA driver hash_update
- *       entry point. This function behaves as a hash_update entry point as
- *       defined in the PSA driver interface specification for transparent
- *       drivers.
- *
- * The application must call mbedtls_psa_hash_setup() before calling this function.
- *
- * If this function returns an error status, the operation enters an error
- * state and must be aborted by calling mbedtls_psa_hash_abort().
- *
- * \param[in,out] operation Active hash operation.
- * \param[in] input         Buffer containing the message fragment to hash.
- * \param input_length      Size of the \p input buffer in bytes.
- *
- * \retval #PSA_SUCCESS
- *         Success.
- * \retval #PSA_ERROR_BAD_STATE
- *         The operation state is not valid (it must be active).
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
- */
-psa_status_t mbedtls_psa_hash_update(
-    mbedtls_psa_hash_operation_t *operation,
-    const uint8_t *input,
-    size_t input_length );
-
-/** Finish the calculation of the Mbed TLS-calculated hash of a message.
- *
- * \note The signature of this function is that of a PSA driver hash_finish
- *       entry point. This function behaves as a hash_finish entry point as
- *       defined in the PSA driver interface specification for transparent
- *       drivers.
- *
- * The application must call mbedtls_psa_hash_setup() before calling this function.
- * This function calculates the hash of the message formed by concatenating
- * the inputs passed to preceding calls to mbedtls_psa_hash_update().
- *
- * When this function returns successfuly, the operation becomes inactive.
- * If this function returns an error status, the operation enters an error
- * state and must be aborted by calling mbedtls_psa_hash_abort().
- *
- * \param[in,out] operation     Active hash operation.
- * \param[out] hash             Buffer where the hash is to be written.
- * \param hash_size             Size of the \p hash buffer in bytes.
- * \param[out] hash_length      On success, the number of bytes
- *                              that make up the hash value. This is always
- *                              #PSA_HASH_LENGTH(\c alg) where \c alg is the
- *                              hash algorithm that is calculated.
- *
- * \retval #PSA_SUCCESS
- *         Success.
- * \retval #PSA_ERROR_BAD_STATE
- *         The operation state is not valid (it must be active).
- * \retval #PSA_ERROR_BUFFER_TOO_SMALL
- *         The size of the \p hash buffer is too small. You can determine a
- *         sufficient buffer size by calling #PSA_HASH_LENGTH(\c alg)
- *         where \c alg is the hash algorithm that is calculated.
- * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
- */
-psa_status_t mbedtls_psa_hash_finish(
-    mbedtls_psa_hash_operation_t *operation,
-    uint8_t *hash,
-    size_t hash_size,
-    size_t *hash_length );
-
-/** Abort an Mbed TLS hash operation.
- *
- * \note The signature of this function is that of a PSA driver hash_abort
- *       entry point. This function behaves as a hash_abort entry point as
- *       defined in the PSA driver interface specification for transparent
- *       drivers.
- *
- * Aborting an operation frees all associated resources except for the
- * \p operation structure itself. Once aborted, the operation object
- * can be reused for another operation by calling
- * mbedtls_psa_hash_setup() again.
- *
- * You may call this function any time after the operation object has
- * been initialized by one of the methods described in #psa_hash_operation_t.
- *
- * In particular, calling mbedtls_psa_hash_abort() after the operation has been
- * terminated by a call to mbedtls_psa_hash_abort(), mbedtls_psa_hash_finish() or
- * mbedtls_psa_hash_verify() is safe and has no effect.
- *
- * \param[in,out] operation     Initialized hash operation.
- *
- * \retval #PSA_SUCCESS
- * \retval #PSA_ERROR_CORRUPTION_DETECTED
- */
-psa_status_t mbedtls_psa_hash_abort(
-    mbedtls_psa_hash_operation_t *operation );
-
-/*
- * BEYOND THIS POINT, TEST DRIVER ENTRY POINTS ONLY.
- */
-
-#if defined(PSA_CRYPTO_DRIVER_TEST)
-
-psa_status_t mbedtls_transparent_test_driver_hash_compute(
-    psa_algorithm_t alg,
-    const uint8_t *input,
-    size_t input_length,
-    uint8_t *hash,
-    size_t hash_size,
-    size_t *hash_length);
-
-psa_status_t mbedtls_transparent_test_driver_hash_setup(
-    mbedtls_transparent_test_driver_hash_operation_t *operation,
-    psa_algorithm_t alg );
-
-psa_status_t mbedtls_transparent_test_driver_hash_clone(
-    const mbedtls_transparent_test_driver_hash_operation_t *source_operation,
-    mbedtls_transparent_test_driver_hash_operation_t *target_operation );
-
-psa_status_t mbedtls_transparent_test_driver_hash_update(
-    mbedtls_transparent_test_driver_hash_operation_t *operation,
-    const uint8_t *input,
-    size_t input_length );
-
-psa_status_t mbedtls_transparent_test_driver_hash_finish(
-    mbedtls_transparent_test_driver_hash_operation_t *operation,
-    uint8_t *hash,
-    size_t hash_size,
-    size_t *hash_length );
-
-psa_status_t mbedtls_transparent_test_driver_hash_abort(
-    mbedtls_transparent_test_driver_hash_operation_t *operation );
-
-#endif /* PSA_CRYPTO_DRIVER_TEST */
-
-#endif /* PSA_CRYPTO_HASH_H */