Removed openssl, and curl, and added mbedded tls.curl-removal

Almost fully removed curl, needs more testing.

Fixed most issues, now trying to cross compile.

Fix?

Sigh.

1 files changed, 382 insertions, 0 deletions

diff --git a/lib/mbedtls-2.27.0/library/mps_reader.h b/lib/mbedtls-2.27.0/library/mps_reader.h
new file mode 100644
index 0000000..427c1bd
--- /dev/null
+++ b/lib/mbedtls-2.27.0/library/mps_reader.h
@@ -0,0 +1,382 @@
+/*
+ *  Copyright The Mbed TLS Contributors
+ *  SPDX-License-Identifier: Apache-2.0
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may
+ *  not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ *  This file is part of mbed TLS (https://tls.mbed.org)
+ */
+
+/**
+ * \file mps_reader.h
+ *
+ * \brief This file defines reader objects, which together with their
+ *        sibling writer objects form the basis for the communication
+ *        between the various layers of the Mbed TLS messaging stack,
+ *        as well as the communication between the messaging stack and
+ *        the (D)TLS handshake protocol implementation.
+ *
+ * Readers provide a means of transferring incoming data from
+ * a 'producer' providing it in chunks of arbitrary size, to
+ * a 'consumer' which fetches and processes it in chunks of
+ * again arbitrary, and potentially different, size.
+ *
+ * Readers can thus be seen as datagram-to-stream converters,
+ * and they abstract away the following two tasks from the user:
+ * 1. The pointer arithmetic of stepping through a producer-
+ *    provided chunk in smaller chunks.
+ * 2. The merging of incoming data chunks in case the
+ *    consumer requests data in larger chunks than what the
+ *    producer provides.
+ *
+ * The basic abstract flow of operation is the following:
+ * - Initially, the reader is in 'producing mode'.
+ * - The producer hands an incoming data buffer to the reader,
+ *   moving it from 'producing' to 'consuming' mode.
+ * - The consumer subsequently fetches and processes the buffer
+ *   content. Once that's done -- or partially done and a consumer's
+ *   request can't be fulfilled -- the producer revokes the reader's
+ *   access to the incoming data buffer, putting the reader back to
+ *   producing mode.
+ * - The producer subsequently gathers more incoming data and hands
+ *   it to the reader until it switches back to consuming mode
+ *   if enough data is available for the last consumer request to
+ *   be satisfiable.
+ * - Repeat the above.
+ *
+ * The abstract states of the reader from the producer's and
+ * consumer's perspective are as follows:
+ *
+ * - From the perspective of the consumer, the state of the
+ *   reader consists of the following:
+ *   - A byte stream representing (concatenation of) the data
+ *     received through calls to mbedtls_mps_reader_get(),
+ *   - A marker within that byte stream indicating which data
+ *     can be considered processed, and hence need not be retained,
+ *     when the reader is passed back to the producer via
+ *     mbedtls_mps_reader_reclaim().
+ *     The marker is set via mbedtls_mps_reader_commit()
+ *     which places it at the end of the current byte stream.
+ *   The consumer need not be aware of the distinction between consumer
+ *   and producer mode, because it only interfaces with the reader
+ *   when the latter is in consuming mode.
+ *
+ * - From the perspective of the producer, the reader's state is one of:
+ *   - Attached: The reader is in consuming mode.
+ *   - Unset: No incoming data buffer is currently managed by the reader,
+ *            and all previously handed incoming data buffers have been
+ *            fully processed. More data needs to be fed into the reader
+ *            via mbedtls_mps_reader_feed().
+ *
+ *   - Accumulating: No incoming data buffer is currently managed by the
+ *                   reader, but some data from the previous incoming data
+ *                   buffer hasn't been processed yet and is internally
+ *                   held back.
+ *   The Attached state belongs to consuming mode, while the Unset and
+ *   Accumulating states belong to producing mode.
+ *
+ * Transitioning from the Unset or Accumulating state to Attached is
+ * done via successful calls to mbedtls_mps_reader_feed(), while
+ * transitioning from Attached to either Unset or Accumulating (depending
+ * on what has been processed) is done via mbedtls_mps_reader_reclaim().
+ *
+ * The following diagram depicts the producer-state progression:
+ *
+ *        +------------------+             reclaim
+ *        |      Unset       +<-------------------------------------+       get
+ *        +--------|---------+                                      |   +------+
+ *                 |                                                |   |      |
+ *                 |                                                |   |      |
+ *                 |                feed                  +---------+---+--+   |
+ *                 +-------------------------------------->                <---+
+ *                                                        |    Attached    |
+ *                 +-------------------------------------->                <---+
+ *                 |     feed, enough data available      +---------+---+--+   |
+ *                 |     to serve previous consumer request         |   |      |
+ *                 |                                                |   |      |
+ *        +--------+---------+                                      |   +------+
+ *   +---->   Accumulating   |<-------------------------------------+    commit
+ *   |    +---+--------------+      reclaim, previous read request
+ *   |        |                        couldn't be fulfilled
+ *   |        |
+ *   +--------+
+ *     feed, need more data to serve
+ *     previous consumer request
+ *                                         |
+ *                                         |
+ *               producing mode            |           consuming mode
+ *                                         |
+ *
+ */
+
+#ifndef MBEDTLS_READER_H
+#define MBEDTLS_READER_H
+
+#include <stdio.h>
+
+#include "mps_common.h"
+#include "mps_error.h"
+
+struct mbedtls_mps_reader;
+typedef struct mbedtls_mps_reader mbedtls_mps_reader;
+
+/*
+ * Structure definitions
+ */
+
+struct mbedtls_mps_reader
+{
+    unsigned char *frag;  /*!< The fragment of incoming data managed by
+                           *   the reader; it is provided to the reader
+                           *   through mbedtls_mps_reader_feed(). The reader
+                           *   does not own the fragment and does not
+                           *   perform any allocation operations on it,
+                           *   but does have read and write access to it.
+                           *
+                           *   The reader is in consuming mode if
+                           *   and only if \c frag is not \c NULL.          */
+    mbedtls_mps_stored_size_t frag_len;
+                          /*!< The length of the current fragment.
+                           *   Must be 0 if \c frag == \c NULL.             */
+    mbedtls_mps_stored_size_t commit;
+                          /*!< The offset of the last commit, relative
+                           *   to the first byte in the fragment, if
+                           *   no accumulator is present. If an accumulator
+                           *   is present, it is viewed as a prefix to the
+                           *   current fragment, and this variable contains
+                           *   an offset from the beginning of the accumulator.
+                           *
+                           *   This is only used when the reader is in
+                           *   consuming mode, i.e. \c frag != \c NULL;
+                           *   otherwise, its value is \c 0.                */
+    mbedtls_mps_stored_size_t end;
+                          /*!< The offset of the end of the last chunk
+                           *   passed to the user through a call to
+                           *   mbedtls_mps_reader_get(), relative to the first
+                           *   byte in the fragment, if no accumulator is
+                           *   present. If an accumulator is present, it is
+                           *   viewed as a prefix to the current fragment, and
+                           *   this variable contains an offset from the
+                           *   beginning of the accumulator.
+                           *
+                           *   This is only used when the reader is in
+                           *   consuming mode, i.e. \c frag != \c NULL;
+                           *   otherwise, its value is \c 0.                */
+    mbedtls_mps_stored_size_t pending;
+                          /*!< The amount of incoming data missing on the
+                           *   last call to mbedtls_mps_reader_get().
+                           *   In particular, it is \c 0 if the last call
+                           *   was successful.
+                           *   If a reader is reclaimed after an
+                           *   unsuccessful call to mbedtls_mps_reader_get(),
+                           *   this variable is used to have the reader
+                           *   remember how much data should be accumulated
+                           *   so that the call to mbedtls_mps_reader_get()
+                           *   succeeds next time.
+                           *   This is only used when the reader is in
+                           *   consuming mode, i.e. \c frag != \c NULL;
+                           *   otherwise, its value is \c 0.                */
+
+    /* The accumulator is only needed if we need to be able to pause
+     * the reader. A few bytes could be saved by moving this to a
+     * separate struct and using a pointer here. */
+
+    unsigned char *acc;   /*!< The accumulator is used to gather incoming
+                           *   data if a read-request via mbedtls_mps_reader_get()
+                           *   cannot be served from the current fragment.   */
+    mbedtls_mps_stored_size_t acc_len;
+                           /*!< The total size of the accumulator.           */
+    mbedtls_mps_stored_size_t acc_available;
+                          /*!< The number of bytes currently gathered in
+                           *   the accumulator. This is both used in
+                           *   producing and in consuming mode:
+                           *   While producing, it is increased until
+                           *   it reaches the value of \c acc_remaining below.
+                           *   While consuming, it is used to judge if a
+                           *   get request can be served from the
+                           *   accumulator or not.
+                           *   Must not be larger than \c acc_len.           */
+    union
+    {
+        mbedtls_mps_stored_size_t acc_remaining;
+                              /*!< This indicates the amount of data still
+                               *   to be gathered in the accumulator. It is
+                               *   only used in producing mode.
+                               *   Must be at most acc_len - acc_available.  */
+        mbedtls_mps_stored_size_t frag_offset;
+                              /*!< If an accumulator is present and in use, this
+                               *   field indicates the offset of the current
+                               *   fragment from the beginning of the
+                               *   accumulator. If no accumulator is present
+                               *   or the accumulator is not in use, this is \c 0.
+                               *   It is only used in consuming mode.
+                               *   Must not be larger than \c acc_available. */
+    } acc_share;
+};
+
+/*
+ * API organization:
+ * A reader object is usually prepared and maintained
+ * by some lower layer and passed for usage to an upper
+ * layer, and the API naturally splits according to which
+ * layer is supposed to use the respective functions.
+ */
+
+/*
+ * Maintenance API (Lower layer)
+ */
+
+/**
+ * \brief           Initialize a reader object
+ *
+ * \param reader    The reader to be initialized.
+ * \param acc       The buffer to be used as a temporary accumulator
+ *                  in case get requests through mbedtls_mps_reader_get()
+ *                  exceed the buffer provided by mbedtls_mps_reader_feed().
+ *                  This buffer is owned by the caller and exclusive use
+ *                  for reading and writing is given to the reader for the
+ *                  duration of the reader's lifetime. It is thus the caller's
+ *                  responsibility to maintain (and not touch) the buffer for
+ *                  the lifetime of the reader, and to properly zeroize and
+ *                  free the memory after the reader has been destroyed.
+ * \param acc_len   The size in Bytes of \p acc.
+ *
+ * \return          \c 0 on success.
+ * \return          A negative \c MBEDTLS_ERR_READER_XXX error code on failure.
+ */
+int mbedtls_mps_reader_init( mbedtls_mps_reader *reader,
+                             unsigned char *acc,
+                             mbedtls_mps_size_t acc_len );
+
+/**
+ * \brief           Free a reader object
+ *
+ * \param reader    The reader to be freed.
+ *
+ * \return          \c 0 on success.
+ * \return          A negative \c MBEDTLS_ERR_READER_XXX error code on failure.
+ */
+int mbedtls_mps_reader_free( mbedtls_mps_reader *reader );
+
+/**
+ * \brief           Pass chunk of data for the reader to manage.
+ *
+ * \param reader    The reader context to use. The reader must be
+ *                  in producing mode.
+ * \param buf       The buffer to be managed by the reader.
+ * \param buflen    The size in Bytes of \p buffer.
+ *
+ * \return          \c 0 on success. In this case, the reader will be
+ *                  moved to consuming mode and obtains read access
+ *                  of \p buf until mbedtls_mps_reader_reclaim()
+ *                  is called. It is the responsibility of the caller
+ *                  to ensure that the \p buf persists and is not changed
+ *                  between successful calls to mbedtls_mps_reader_feed()
+ *                  and mbedtls_mps_reader_reclaim().
+ * \return          \c MBEDTLS_ERR_MPS_READER_NEED_MORE if more input data is
+ *                  required to fulfill a previous request to mbedtls_mps_reader_get().
+ *                  In this case, the reader remains in producing mode and
+ *                  takes no ownership of the provided buffer (an internal copy
+ *                  is made instead).
+ * \return          Another negative \c MBEDTLS_ERR_READER_XXX error code on
+ *                  different kinds of failures.
+ */
+int mbedtls_mps_reader_feed( mbedtls_mps_reader *reader,
+                             unsigned char *buf,
+                             mbedtls_mps_size_t buflen );
+
+/**
+ * \brief           Reclaim reader's access to the current input buffer.
+ *
+ * \param reader    The reader context to use. The reader must be
+ *                  in consuming mode.
+ * \param paused    If not \c NULL, the integer at address \p paused will be
+ *                  modified to indicate whether the reader has been paused
+ *                  (value \c 1) or not (value \c 0). Pausing happens if there
+ *                  is uncommitted data and a previous request to
+ *                  mbedtls_mps_reader_get() has exceeded the bounds of the
+ *                  input buffer.
+ *
+ * \return          \c 0 on success.
+ * \return          A negative \c MBEDTLS_ERR_READER_XXX error code on failure.
+ */
+int mbedtls_mps_reader_reclaim( mbedtls_mps_reader *reader,
+                                int *paused );
+
+/*
+ * Usage API (Upper layer)
+ */
+
+/**
+ * \brief           Request data from the reader.
+ *
+ * \param reader    The reader context to use. The reader must
+ *                  be in consuming mode.
+ * \param desired   The desired amount of data to be read, in Bytes.
+ * \param buffer    The address to store the buffer pointer in.
+ *                  This must not be \c NULL.
+ * \param buflen    The address to store the actual buffer
+ *                  length in, or \c NULL.
+ *
+ * \return          \c 0 on success. In this case, \c *buf holds the
+ *                  address of a buffer of size \c *buflen
+ *                  (if \c buflen != \c NULL) or \c desired
+ *                  (if \c buflen == \c NULL). The user has read access
+ *                  to the buffer and guarantee of stability of the data
+ *                  until the next call to mbedtls_mps_reader_reclaim().
+ * \return          #MBEDTLS_ERR_MPS_READER_OUT_OF_DATA if there is not enough
+ *                  data available to serve the get request. In this case, the
+ *                  reader remains intact and in consuming mode, and the consumer
+ *                  should retry the call after a successful cycle of
+ *                  mbedtls_mps_reader_reclaim() and mbedtls_mps_reader_feed().
+ *                  If, after such a cycle, the consumer requests a different
+ *                  amount of data, the result is implementation-defined;
+ *                  progress is guaranteed only if the same amount of data
+ *                  is requested after a mbedtls_mps_reader_reclaim() and
+ *                  mbedtls_mps_reader_feed() cycle.
+ * \return          Another negative \c MBEDTLS_ERR_READER_XXX error
+ *                  code for different kinds of failure.
+ *
+ * \note            Passing \c NULL as \p buflen is a convenient way to
+ *                  indicate that fragmentation is not tolerated.
+ *                  It's functionally equivalent to passing a valid
+ *                  address as buflen and checking \c *buflen == \c desired
+ *                  afterwards.
+ */
+int mbedtls_mps_reader_get( mbedtls_mps_reader *reader,
+                            mbedtls_mps_size_t desired,
+                            unsigned char **buffer,
+                            mbedtls_mps_size_t *buflen );
+
+/**
+ * \brief         Mark data obtained from mbedtls_mps_reader_get() as processed.
+ *
+ *                This call indicates that all data received from prior calls to
+ *                mbedtls_mps_reader_get() has been or will have been
+ *                processed when mbedtls_mps_reader_reclaim() is called,
+ *                and thus need not be backed up.
+ *
+ *                This function has no user observable effect until
+ *                mbedtls_mps_reader_reclaim() is called. In particular,
+ *                buffers received from mbedtls_mps_reader_get() remain
+ *                valid until mbedtls_mps_reader_reclaim() is called.
+ *
+ * \param reader  The reader context to use.
+ *
+ * \return        \c 0 on success.
+ * \return        A negative \c MBEDTLS_ERR_READER_XXX error code on failure.
+ *
+ */
+int mbedtls_mps_reader_commit( mbedtls_mps_reader *reader );
+
+#endif /* MBEDTLS_READER_H */