Removed old mbedtls, replacing with submodule.

1 files changed, 0 insertions, 1094 deletions

diff --git a/lib/mbedtls-2.27.0/include/mbedtls/x509_crt.h b/lib/mbedtls-2.27.0/include/mbedtls/x509_crt.h
deleted file mode 100644
index 64ccb43..0000000
--- a/lib/mbedtls-2.27.0/include/mbedtls/x509_crt.h
+++ /dev/null
@@ -1,1094 +0,0 @@
-/**
- * \file x509_crt.h
- *
- * \brief X.509 certificate parsing and writing
- */
-/*
- *  Copyright The Mbed TLS Contributors
- *  SPDX-License-Identifier: Apache-2.0
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may
- *  not use this file except in compliance with the License.
- *  You may obtain a copy of the License at
- *
- *  http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software
- *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
- *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- *  See the License for the specific language governing permissions and
- *  limitations under the License.
- */
-#ifndef MBEDTLS_X509_CRT_H
-#define MBEDTLS_X509_CRT_H
-
-#if !defined(MBEDTLS_CONFIG_FILE)
-#include "mbedtls/config.h"
-#else
-#include MBEDTLS_CONFIG_FILE
-#endif
-
-#include "mbedtls/x509.h"
-#include "mbedtls/x509_crl.h"
-#include "mbedtls/bignum.h"
-
-/**
- * \addtogroup x509_module
- * \{
- */
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/**
- * \name Structures and functions for parsing and writing X.509 certificates
- * \{
- */
-
-/**
- * Container for an X.509 certificate. The certificate may be chained.
- */
-typedef struct mbedtls_x509_crt
-{
-    int own_buffer;                     /**< Indicates if \c raw is owned
-                                         *   by the structure or not.        */
-    mbedtls_x509_buf raw;               /**< The raw certificate data (DER). */
-    mbedtls_x509_buf tbs;               /**< The raw certificate body (DER). The part that is To Be Signed. */
-
-    int version;                /**< The X.509 version. (1=v1, 2=v2, 3=v3) */
-    mbedtls_x509_buf serial;            /**< Unique id for certificate issued by a specific CA. */
-    mbedtls_x509_buf sig_oid;           /**< Signature algorithm, e.g. sha1RSA */
-
-    mbedtls_x509_buf issuer_raw;        /**< The raw issuer data (DER). Used for quick comparison. */
-    mbedtls_x509_buf subject_raw;       /**< The raw subject data (DER). Used for quick comparison. */
-
-    mbedtls_x509_name issuer;           /**< The parsed issuer data (named information object). */
-    mbedtls_x509_name subject;          /**< The parsed subject data (named information object). */
-
-    mbedtls_x509_time valid_from;       /**< Start time of certificate validity. */
-    mbedtls_x509_time valid_to;         /**< End time of certificate validity. */
-
-    mbedtls_x509_buf pk_raw;
-    mbedtls_pk_context pk;              /**< Container for the public key context. */
-
-    mbedtls_x509_buf issuer_id;         /**< Optional X.509 v2/v3 issuer unique identifier. */
-    mbedtls_x509_buf subject_id;        /**< Optional X.509 v2/v3 subject unique identifier. */
-    mbedtls_x509_buf v3_ext;            /**< Optional X.509 v3 extensions.  */
-    mbedtls_x509_sequence subject_alt_names;    /**< Optional list of raw entries of Subject Alternative Names extension (currently only dNSName and OtherName are listed). */
-
-    mbedtls_x509_sequence certificate_policies; /**< Optional list of certificate policies (Only anyPolicy is printed and enforced, however the rest of the policies are still listed). */
-
-    int ext_types;              /**< Bit string containing detected and parsed extensions */
-    int ca_istrue;              /**< Optional Basic Constraint extension value: 1 if this certificate belongs to a CA, 0 otherwise. */
-    int max_pathlen;            /**< Optional Basic Constraint extension value: The maximum path length to the root certificate. Path length is 1 higher than RFC 5280 'meaning', so 1+ */
-
-    unsigned int key_usage;     /**< Optional key usage extension value: See the values in x509.h */
-
-    mbedtls_x509_sequence ext_key_usage; /**< Optional list of extended key usage OIDs. */
-
-    unsigned char ns_cert_type; /**< Optional Netscape certificate type extension value: See the values in x509.h */
-
-    mbedtls_x509_buf sig;               /**< Signature: hash of the tbs part signed with the private key. */
-    mbedtls_md_type_t sig_md;           /**< Internal representation of the MD algorithm of the signature algorithm, e.g. MBEDTLS_MD_SHA256 */
-    mbedtls_pk_type_t sig_pk;           /**< Internal representation of the Public Key algorithm of the signature algorithm, e.g. MBEDTLS_PK_RSA */
-    void *sig_opts;             /**< Signature options to be passed to mbedtls_pk_verify_ext(), e.g. for RSASSA-PSS */
-
-    struct mbedtls_x509_crt *next;     /**< Next certificate in the CA-chain. */
-}
-mbedtls_x509_crt;
-
-/**
- * From RFC 5280 section 4.2.1.6:
- * OtherName ::= SEQUENCE {
- *      type-id    OBJECT IDENTIFIER,
- *      value      [0] EXPLICIT ANY DEFINED BY type-id }
- */
-typedef struct mbedtls_x509_san_other_name
-{
-    /**
-     * The type_id is an OID as deifned in RFC 5280.
-     * To check the value of the type id, you should use
-     * \p MBEDTLS_OID_CMP with a known OID mbedtls_x509_buf.
-     */
-    mbedtls_x509_buf type_id;                   /**< The type id. */
-    union
-    {
-        /**
-         * From RFC 4108 section 5:
-         * HardwareModuleName ::= SEQUENCE {
-         *                         hwType OBJECT IDENTIFIER,
-         *                         hwSerialNum OCTET STRING }
-         */
-        struct
-        {
-            mbedtls_x509_buf oid;               /**< The object identifier. */
-            mbedtls_x509_buf val;               /**< The named value. */
-        }
-        hardware_module_name;
-    }
-    value;
-}
-mbedtls_x509_san_other_name;
-
-/**
- * A structure for holding the parsed Subject Alternative Name, according to type
- */
-typedef struct mbedtls_x509_subject_alternative_name
-{
-    int type;                              /**< The SAN type, value of MBEDTLS_X509_SAN_XXX. */
-    union {
-        mbedtls_x509_san_other_name other_name; /**< The otherName supported type. */
-        mbedtls_x509_buf   unstructured_name; /**< The buffer for the un constructed types. Only dnsName currently supported */
-    }
-    san; /**< A union of the supported SAN types */
-}
-mbedtls_x509_subject_alternative_name;
-
-/**
- * Build flag from an algorithm/curve identifier (pk, md, ecp)
- * Since 0 is always XXX_NONE, ignore it.
- */
-#define MBEDTLS_X509_ID_FLAG( id )   ( 1 << ( (id) - 1 ) )
-
-/**
- * Security profile for certificate verification.
- *
- * All lists are bitfields, built by ORing flags from MBEDTLS_X509_ID_FLAG().
- */
-typedef struct mbedtls_x509_crt_profile
-{
-    uint32_t allowed_mds;       /**< MDs for signatures         */
-    uint32_t allowed_pks;       /**< PK algs for signatures     */
-    uint32_t allowed_curves;    /**< Elliptic curves for ECDSA  */
-    uint32_t rsa_min_bitlen;    /**< Minimum size for RSA keys  */
-}
-mbedtls_x509_crt_profile;
-
-#define MBEDTLS_X509_CRT_VERSION_1              0
-#define MBEDTLS_X509_CRT_VERSION_2              1
-#define MBEDTLS_X509_CRT_VERSION_3              2
-
-#define MBEDTLS_X509_RFC5280_MAX_SERIAL_LEN 32
-#define MBEDTLS_X509_RFC5280_UTC_TIME_LEN   15
-
-#if !defined( MBEDTLS_X509_MAX_FILE_PATH_LEN )
-#define MBEDTLS_X509_MAX_FILE_PATH_LEN 512
-#endif
-
-/**
- * Container for writing a certificate (CRT)
- */
-typedef struct mbedtls_x509write_cert
-{
-    int version;
-    mbedtls_mpi serial;
-    mbedtls_pk_context *subject_key;
-    mbedtls_pk_context *issuer_key;
-    mbedtls_asn1_named_data *subject;
-    mbedtls_asn1_named_data *issuer;
-    mbedtls_md_type_t md_alg;
-    char not_before[MBEDTLS_X509_RFC5280_UTC_TIME_LEN + 1];
-    char not_after[MBEDTLS_X509_RFC5280_UTC_TIME_LEN + 1];
-    mbedtls_asn1_named_data *extensions;
-}
-mbedtls_x509write_cert;
-
-/**
- * Item in a verification chain: cert and flags for it
- */
-typedef struct {
-    mbedtls_x509_crt *crt;
-    uint32_t flags;
-} mbedtls_x509_crt_verify_chain_item;
-
-/**
- * Max size of verification chain: end-entity + intermediates + trusted root
- */
-#define MBEDTLS_X509_MAX_VERIFY_CHAIN_SIZE  ( MBEDTLS_X509_MAX_INTERMEDIATE_CA + 2 )
-
-/**
- * Verification chain as built by \c mbedtls_crt_verify_chain()
- */
-typedef struct
-{
-    mbedtls_x509_crt_verify_chain_item items[MBEDTLS_X509_MAX_VERIFY_CHAIN_SIZE];
-    unsigned len;
-
-#if defined(MBEDTLS_X509_TRUSTED_CERTIFICATE_CALLBACK)
-    /* This stores the list of potential trusted signers obtained from
-     * the CA callback used for the CRT verification, if configured.
-     * We must track it somewhere because the callback passes its
-     * ownership to the caller. */
-    mbedtls_x509_crt *trust_ca_cb_result;
-#endif /* MBEDTLS_X509_TRUSTED_CERTIFICATE_CALLBACK */
-} mbedtls_x509_crt_verify_chain;
-
-#if defined(MBEDTLS_ECDSA_C) && defined(MBEDTLS_ECP_RESTARTABLE)
-
-/**
- * \brief       Context for resuming X.509 verify operations
- */
-typedef struct
-{
-    /* for check_signature() */
-    mbedtls_pk_restart_ctx pk;
-
-    /* for find_parent_in() */
-    mbedtls_x509_crt *parent; /* non-null iff parent_in in progress */
-    mbedtls_x509_crt *fallback_parent;
-    int fallback_signature_is_good;
-
-    /* for find_parent() */
-    int parent_is_trusted; /* -1 if find_parent is not in progress */
-
-    /* for verify_chain() */
-    enum {
-        x509_crt_rs_none,
-        x509_crt_rs_find_parent,
-    } in_progress;  /* none if no operation is in progress */
-    int self_cnt;
-    mbedtls_x509_crt_verify_chain ver_chain;
-
-} mbedtls_x509_crt_restart_ctx;
-
-#else /* MBEDTLS_ECDSA_C && MBEDTLS_ECP_RESTARTABLE */
-
-/* Now we can declare functions that take a pointer to that */
-typedef void mbedtls_x509_crt_restart_ctx;
-
-#endif /* MBEDTLS_ECDSA_C && MBEDTLS_ECP_RESTARTABLE */
-
-#if defined(MBEDTLS_X509_CRT_PARSE_C)
-/**
- * Default security profile. Should provide a good balance between security
- * and compatibility with current deployments.
- *
- * This profile permits:
- * - SHA2 hashes.
- * - All supported elliptic curves.
- * - RSA with 2048 bits and above.
- *
- * New minor versions of Mbed TLS may extend this profile, for example if
- * new curves are added to the library. New minor versions of Mbed TLS will
- * not reduce this profile unless serious security concerns require it.
- */
-extern const mbedtls_x509_crt_profile mbedtls_x509_crt_profile_default;
-
-/**
- * Expected next default profile. Recommended for new deployments.
- * Currently targets a 128-bit security level, except for allowing RSA-2048.
- */
-extern const mbedtls_x509_crt_profile mbedtls_x509_crt_profile_next;
-
-/**
- * NSA Suite B profile.
- */
-extern const mbedtls_x509_crt_profile mbedtls_x509_crt_profile_suiteb;
-
-/**
- * \brief          Parse a single DER formatted certificate and add it
- *                 to the end of the provided chained list.
- *
- * \param chain    The pointer to the start of the CRT chain to attach to.
- *                 When parsing the first CRT in a chain, this should point
- *                 to an instance of ::mbedtls_x509_crt initialized through
- *                 mbedtls_x509_crt_init().
- * \param buf      The buffer holding the DER encoded certificate.
- * \param buflen   The size in Bytes of \p buf.
- *
- * \note           This function makes an internal copy of the CRT buffer
- *                 \p buf. In particular, \p buf may be destroyed or reused
- *                 after this call returns. To avoid duplicating the CRT
- *                 buffer (at the cost of stricter lifetime constraints),
- *                 use mbedtls_x509_crt_parse_der_nocopy() instead.
- *
- * \return         \c 0 if successful.
- * \return         A negative error code on failure.
- */
-int mbedtls_x509_crt_parse_der( mbedtls_x509_crt *chain,
-                                const unsigned char *buf,
-                                size_t buflen );
-
-/**
- * \brief          The type of certificate extension callbacks.
- *
- *                 Callbacks of this type are passed to and used by the
- *                 mbedtls_x509_crt_parse_der_with_ext_cb() routine when
- *                 it encounters either an unsupported extension or a
- *                 "certificate policies" extension containing any
- *                 unsupported certificate policies.
- *                 Future versions of the library may invoke the callback
- *                 in other cases, if and when the need arises.
- *
- * \param p_ctx    An opaque context passed to the callback.
- * \param crt      The certificate being parsed.
- * \param oid      The OID of the extension.
- * \param critical Whether the extension is critical.
- * \param p        Pointer to the start of the extension value
- *                 (the content of the OCTET STRING).
- * \param end      End of extension value.
- *
- * \note           The callback must fail and return a negative error code
- *                 if it can not parse or does not support the extension.
- *                 When the callback fails to parse a critical extension
- *                 mbedtls_x509_crt_parse_der_with_ext_cb() also fails.
- *                 When the callback fails to parse a non critical extension
- *                 mbedtls_x509_crt_parse_der_with_ext_cb() simply skips
- *                 the extension and continues parsing.
- *
- * \return         \c 0 on success.
- * \return         A negative error code on failure.
- */
-typedef int (*mbedtls_x509_crt_ext_cb_t)( void *p_ctx,
-                                          mbedtls_x509_crt const *crt,
-                                          mbedtls_x509_buf const *oid,
-                                          int critical,
-                                          const unsigned char *p,
-                                          const unsigned char *end );
-
-/**
- * \brief            Parse a single DER formatted certificate and add it
- *                   to the end of the provided chained list.
- *
- * \param chain      The pointer to the start of the CRT chain to attach to.
- *                   When parsing the first CRT in a chain, this should point
- *                   to an instance of ::mbedtls_x509_crt initialized through
- *                   mbedtls_x509_crt_init().
- * \param buf        The buffer holding the DER encoded certificate.
- * \param buflen     The size in Bytes of \p buf.
- * \param make_copy  When not zero this function makes an internal copy of the
- *                   CRT buffer \p buf. In particular, \p buf may be destroyed
- *                   or reused after this call returns.
- *                   When zero this function avoids duplicating the CRT buffer
- *                   by taking temporary ownership thereof until the CRT
- *                   is destroyed (like mbedtls_x509_crt_parse_der_nocopy())
- * \param cb         A callback invoked for every unsupported certificate
- *                   extension.
- * \param p_ctx      An opaque context passed to the callback.
- *
- * \note             This call is functionally equivalent to
- *                   mbedtls_x509_crt_parse_der(), and/or
- *                   mbedtls_x509_crt_parse_der_nocopy()
- *                   but it calls the callback with every unsupported
- *                   certificate extension and additionally the
- *                   "certificate policies" extension if it contains any
- *                   unsupported certificate policies.
- *                   The callback must return a negative error code if it
- *                   does not know how to handle such an extension.
- *                   When the callback fails to parse a critical extension
- *                   mbedtls_x509_crt_parse_der_with_ext_cb() also fails.
- *                   When the callback fails to parse a non critical extension
- *                   mbedtls_x509_crt_parse_der_with_ext_cb() simply skips
- *                   the extension and continues parsing.
- *                   Future versions of the library may invoke the callback
- *                   in other cases, if and when the need arises.
- *
- * \return           \c 0 if successful.
- * \return           A negative error code on failure.
- */
-int mbedtls_x509_crt_parse_der_with_ext_cb( mbedtls_x509_crt *chain,
-                                            const unsigned char *buf,
-                                            size_t buflen,
-                                            int make_copy,
-                                            mbedtls_x509_crt_ext_cb_t cb,
-                                            void *p_ctx );
-
-/**
- * \brief          Parse a single DER formatted certificate and add it
- *                 to the end of the provided chained list. This is a
- *                 variant of mbedtls_x509_crt_parse_der() which takes
- *                 temporary ownership of the CRT buffer until the CRT
- *                 is destroyed.
- *
- * \param chain    The pointer to the start of the CRT chain to attach to.
- *                 When parsing the first CRT in a chain, this should point
- *                 to an instance of ::mbedtls_x509_crt initialized through
- *                 mbedtls_x509_crt_init().
- * \param buf      The address of the readable buffer holding the DER encoded
- *                 certificate to use. On success, this buffer must be
- *                 retained and not be changed for the liftetime of the
- *                 CRT chain \p chain, that is, until \p chain is destroyed
- *                 through a call to mbedtls_x509_crt_free().
- * \param buflen   The size in Bytes of \p buf.
- *
- * \note           This call is functionally equivalent to
- *                 mbedtls_x509_crt_parse_der(), but it avoids creating a
- *                 copy of the input buffer at the cost of stronger lifetime
- *                 constraints. This is useful in constrained environments
- *                 where duplication of the CRT cannot be tolerated.
- *
- * \return         \c 0 if successful.
- * \return         A negative error code on failure.
- */
-int mbedtls_x509_crt_parse_der_nocopy( mbedtls_x509_crt *chain,
-                                       const unsigned char *buf,
-                                       size_t buflen );
-
-/**
- * \brief          Parse one DER-encoded or one or more concatenated PEM-encoded
- *                 certificates and add them to the chained list.
- *
- *                 For CRTs in PEM encoding, the function parses permissively:
- *                 if at least one certificate can be parsed, the function
- *                 returns the number of certificates for which parsing failed
- *                 (hence \c 0 if all certificates were parsed successfully).
- *                 If no certificate could be parsed, the function returns
- *                 the first (negative) error encountered during parsing.
- *
- *                 PEM encoded certificates may be interleaved by other data
- *                 such as human readable descriptions of their content, as
- *                 long as the certificates are enclosed in the PEM specific
- *                 '-----{BEGIN/END} CERTIFICATE-----' delimiters.
- *
- * \param chain    The chain to which to add the parsed certificates.
- * \param buf      The buffer holding the certificate data in PEM or DER format.
- *                 For certificates in PEM encoding, this may be a concatenation
- *                 of multiple certificates; for DER encoding, the buffer must
- *                 comprise exactly one certificate.
- * \param buflen   The size of \p buf, including the terminating \c NULL byte
- *                 in case of PEM encoded data.
- *
- * \return         \c 0 if all certificates were parsed successfully.
- * \return         The (positive) number of certificates that couldn't
- *                 be parsed if parsing was partly successful (see above).
- * \return         A negative X509 or PEM error code otherwise.
- *
- */
-int mbedtls_x509_crt_parse( mbedtls_x509_crt *chain, const unsigned char *buf, size_t buflen );
-
-#if defined(MBEDTLS_FS_IO)
-/**
- * \brief          Load one or more certificates and add them
- *                 to the chained list. Parses permissively. If some
- *                 certificates can be parsed, the result is the number
- *                 of failed certificates it encountered. If none complete
- *                 correctly, the first error is returned.
- *
- * \param chain    points to the start of the chain
- * \param path     filename to read the certificates from
- *
- * \return         0 if all certificates parsed successfully, a positive number
- *                 if partly successful or a specific X509 or PEM error code
- */
-int mbedtls_x509_crt_parse_file( mbedtls_x509_crt *chain, const char *path );
-
-/**
- * \brief          Load one or more certificate files from a path and add them
- *                 to the chained list. Parses permissively. If some
- *                 certificates can be parsed, the result is the number
- *                 of failed certificates it encountered. If none complete
- *                 correctly, the first error is returned.
- *
- * \param chain    points to the start of the chain
- * \param path     directory / folder to read the certificate files from
- *
- * \return         0 if all certificates parsed successfully, a positive number
- *                 if partly successful or a specific X509 or PEM error code
- */
-int mbedtls_x509_crt_parse_path( mbedtls_x509_crt *chain, const char *path );
-
-#endif /* MBEDTLS_FS_IO */
-/**
- * \brief          This function parses an item in the SubjectAlternativeNames
- *                 extension.
- *
- * \param san_buf  The buffer holding the raw data item of the subject
- *                 alternative name.
- * \param san      The target structure to populate with the parsed presentation
- *                 of the subject alternative name encoded in \p san_raw.
- *
- * \note           Only "dnsName" and "otherName" of type hardware_module_name
- *                 as defined in RFC 4180 is supported.
- *
- * \note           This function should be called on a single raw data of
- *                 subject alternative name. For example, after successful
- *                 certificate parsing, one must iterate on every item in the
- *                 \p crt->subject_alt_names sequence, and pass it to
- *                 this function.
- *
- * \warning        The target structure contains pointers to the raw data of the
- *                 parsed certificate, and its lifetime is restricted by the
- *                 lifetime of the certificate.
- *
- * \return         \c 0 on success
- * \return         #MBEDTLS_ERR_X509_FEATURE_UNAVAILABLE for an unsupported
- *                 SAN type.
- * \return         Another negative value for any other failure.
- */
-int mbedtls_x509_parse_subject_alt_name( const mbedtls_x509_buf *san_buf,
-                                         mbedtls_x509_subject_alternative_name *san );
-/**
- * \brief          Returns an informational string about the
- *                 certificate.
- *
- * \param buf      Buffer to write to
- * \param size     Maximum size of buffer
- * \param prefix   A line prefix
- * \param crt      The X509 certificate to represent
- *
- * \return         The length of the string written (not including the
- *                 terminated nul byte), or a negative error code.
- */
-int mbedtls_x509_crt_info( char *buf, size_t size, const char *prefix,
-                   const mbedtls_x509_crt *crt );
-
-/**
- * \brief          Returns an informational string about the
- *                 verification status of a certificate.
- *
- * \param buf      Buffer to write to
- * \param size     Maximum size of buffer
- * \param prefix   A line prefix
- * \param flags    Verification flags created by mbedtls_x509_crt_verify()
- *
- * \return         The length of the string written (not including the
- *                 terminated nul byte), or a negative error code.
- */
-int mbedtls_x509_crt_verify_info( char *buf, size_t size, const char *prefix,
-                          uint32_t flags );
-
-/**
- * \brief          Verify a chain of certificates.
- *
- *                 The verify callback is a user-supplied callback that
- *                 can clear / modify / add flags for a certificate. If set,
- *                 the verification callback is called for each
- *                 certificate in the chain (from the trust-ca down to the
- *                 presented crt). The parameters for the callback are:
- *                 (void *parameter, mbedtls_x509_crt *crt, int certificate_depth,
- *                 int *flags). With the flags representing current flags for
- *                 that specific certificate and the certificate depth from
- *                 the bottom (Peer cert depth = 0).
- *
- *                 All flags left after returning from the callback
- *                 are also returned to the application. The function should
- *                 return 0 for anything (including invalid certificates)
- *                 other than fatal error, as a non-zero return code
- *                 immediately aborts the verification process. For fatal
- *                 errors, a specific error code should be used (different
- *                 from MBEDTLS_ERR_X509_CERT_VERIFY_FAILED which should not
- *                 be returned at this point), or MBEDTLS_ERR_X509_FATAL_ERROR
- *                 can be used if no better code is available.
- *
- * \note           In case verification failed, the results can be displayed
- *                 using \c mbedtls_x509_crt_verify_info()
- *
- * \note           Same as \c mbedtls_x509_crt_verify_with_profile() with the
- *                 default security profile.
- *
- * \note           It is your responsibility to provide up-to-date CRLs for
- *                 all trusted CAs. If no CRL is provided for the CA that was
- *                 used to sign the certificate, CRL verification is skipped
- *                 silently, that is *without* setting any flag.
- *
- * \note           The \c trust_ca list can contain two types of certificates:
- *                 (1) those of trusted root CAs, so that certificates
- *                 chaining up to those CAs will be trusted, and (2)
- *                 self-signed end-entity certificates to be trusted (for
- *                 specific peers you know) - in that case, the self-signed
- *                 certificate doesn't need to have the CA bit set.
- *
- * \param crt      The certificate chain to be verified.
- * \param trust_ca The list of trusted CAs.
- * \param ca_crl   The list of CRLs for trusted CAs.
- * \param cn       The expected Common Name. This will be checked to be
- *                 present in the certificate's subjectAltNames extension or,
- *                 if this extension is absent, as a CN component in its
- *                 Subject name. Currently only DNS names are supported. This
- *                 may be \c NULL if the CN need not be verified.
- * \param flags    The address at which to store the result of the verification.
- *                 If the verification couldn't be completed, the flag value is
- *                 set to (uint32_t) -1.
- * \param f_vrfy   The verification callback to use. See the documentation
- *                 of mbedtls_x509_crt_verify() for more information.
- * \param p_vrfy   The context to be passed to \p f_vrfy.
- *
- * \return         \c 0 if the chain is valid with respect to the
- *                 passed CN, CAs, CRLs and security profile.
- * \return         #MBEDTLS_ERR_X509_CERT_VERIFY_FAILED in case the
- *                 certificate chain verification failed. In this case,
- *                 \c *flags will have one or more
- *                 \c MBEDTLS_X509_BADCERT_XXX or \c MBEDTLS_X509_BADCRL_XXX
- *                 flags set.
- * \return         Another negative error code in case of a fatal error
- *                 encountered during the verification process.
- */
-int mbedtls_x509_crt_verify( mbedtls_x509_crt *crt,
-                     mbedtls_x509_crt *trust_ca,
-                     mbedtls_x509_crl *ca_crl,
-                     const char *cn, uint32_t *flags,
-                     int (*f_vrfy)(void *, mbedtls_x509_crt *, int, uint32_t *),
-                     void *p_vrfy );
-
-/**
- * \brief          Verify a chain of certificates with respect to
- *                 a configurable security profile.
- *
- * \note           Same as \c mbedtls_x509_crt_verify(), but with explicit
- *                 security profile.
- *
- * \note           The restrictions on keys (RSA minimum size, allowed curves
- *                 for ECDSA) apply to all certificates: trusted root,
- *                 intermediate CAs if any, and end entity certificate.
- *
- * \param crt      The certificate chain to be verified.
- * \param trust_ca The list of trusted CAs.
- * \param ca_crl   The list of CRLs for trusted CAs.
- * \param profile  The security profile to use for the verification.
- * \param cn       The expected Common Name. This may be \c NULL if the
- *                 CN need not be verified.
- * \param flags    The address at which to store the result of the verification.
- *                 If the verification couldn't be completed, the flag value is
- *                 set to (uint32_t) -1.
- * \param f_vrfy   The verification callback to use. See the documentation
- *                 of mbedtls_x509_crt_verify() for more information.
- * \param p_vrfy   The context to be passed to \p f_vrfy.
- *
- * \return         \c 0 if the chain is valid with respect to the
- *                 passed CN, CAs, CRLs and security profile.
- * \return         #MBEDTLS_ERR_X509_CERT_VERIFY_FAILED in case the
- *                 certificate chain verification failed. In this case,
- *                 \c *flags will have one or more
- *                 \c MBEDTLS_X509_BADCERT_XXX or \c MBEDTLS_X509_BADCRL_XXX
- *                 flags set.
- * \return         Another negative error code in case of a fatal error
- *                 encountered during the verification process.
- */
-int mbedtls_x509_crt_verify_with_profile( mbedtls_x509_crt *crt,
-                     mbedtls_x509_crt *trust_ca,
-                     mbedtls_x509_crl *ca_crl,
-                     const mbedtls_x509_crt_profile *profile,
-                     const char *cn, uint32_t *flags,
-                     int (*f_vrfy)(void *, mbedtls_x509_crt *, int, uint32_t *),
-                     void *p_vrfy );
-
-/**
- * \brief          Restartable version of \c mbedtls_crt_verify_with_profile()
- *
- * \note           Performs the same job as \c mbedtls_crt_verify_with_profile()
- *                 but can return early and restart according to the limit
- *                 set with \c mbedtls_ecp_set_max_ops() to reduce blocking.
- *
- * \param crt      The certificate chain to be verified.
- * \param trust_ca The list of trusted CAs.
- * \param ca_crl   The list of CRLs for trusted CAs.
- * \param profile  The security profile to use for the verification.
- * \param cn       The expected Common Name. This may be \c NULL if the
- *                 CN need not be verified.
- * \param flags    The address at which to store the result of the verification.
- *                 If the verification couldn't be completed, the flag value is
- *                 set to (uint32_t) -1.
- * \param f_vrfy   The verification callback to use. See the documentation
- *                 of mbedtls_x509_crt_verify() for more information.
- * \param p_vrfy   The context to be passed to \p f_vrfy.
- * \param rs_ctx   The restart context to use. This may be set to \c NULL
- *                 to disable restartable ECC.
- *
- * \return         See \c mbedtls_crt_verify_with_profile(), or
- * \return         #MBEDTLS_ERR_ECP_IN_PROGRESS if maximum number of
- *                 operations was reached: see \c mbedtls_ecp_set_max_ops().
- */
-int mbedtls_x509_crt_verify_restartable( mbedtls_x509_crt *crt,
-                     mbedtls_x509_crt *trust_ca,
-                     mbedtls_x509_crl *ca_crl,
-                     const mbedtls_x509_crt_profile *profile,
-                     const char *cn, uint32_t *flags,
-                     int (*f_vrfy)(void *, mbedtls_x509_crt *, int, uint32_t *),
-                     void *p_vrfy,
-                     mbedtls_x509_crt_restart_ctx *rs_ctx );
-
-/**
- * \brief               The type of trusted certificate callbacks.
- *
- *                      Callbacks of this type are passed to and used by the CRT
- *                      verification routine mbedtls_x509_crt_verify_with_ca_cb()
- *                      when looking for trusted signers of a given certificate.
- *
- *                      On success, the callback returns a list of trusted
- *                      certificates to be considered as potential signers
- *                      for the input certificate.
- *
- * \param p_ctx         An opaque context passed to the callback.
- * \param child         The certificate for which to search a potential signer.
- *                      This will point to a readable certificate.
- * \param candidate_cas The address at which to store the address of the first
- *                      entry in the generated linked list of candidate signers.
- *                      This will not be \c NULL.
- *
- * \note                The callback must only return a non-zero value on a
- *                      fatal error. If, in contrast, the search for a potential
- *                      signer completes without a single candidate, the
- *                      callback must return \c 0 and set \c *candidate_cas
- *                      to \c NULL.
- *
- * \return              \c 0 on success. In this case, \c *candidate_cas points
- *                      to a heap-allocated linked list of instances of
- *                      ::mbedtls_x509_crt, and ownership of this list is passed
- *                      to the caller.
- * \return              A negative error code on failure.
- */
-typedef int (*mbedtls_x509_crt_ca_cb_t)( void *p_ctx,
-                                         mbedtls_x509_crt const *child,
-                                         mbedtls_x509_crt **candidate_cas );
-
-#if defined(MBEDTLS_X509_TRUSTED_CERTIFICATE_CALLBACK)
-/**
- * \brief          Version of \c mbedtls_x509_crt_verify_with_profile() which
- *                 uses a callback to acquire the list of trusted CA
- *                 certificates.
- *
- * \param crt      The certificate chain to be verified.
- * \param f_ca_cb  The callback to be used to query for potential signers
- *                 of a given child certificate. See the documentation of
- *                 ::mbedtls_x509_crt_ca_cb_t for more information.
- * \param p_ca_cb  The opaque context to be passed to \p f_ca_cb.
- * \param profile  The security profile for the verification.
- * \param cn       The expected Common Name. This may be \c NULL if the
- *                 CN need not be verified.
- * \param flags    The address at which to store the result of the verification.
- *                 If the verification couldn't be completed, the flag value is
- *                 set to (uint32_t) -1.
- * \param f_vrfy   The verification callback to use. See the documentation
- *                 of mbedtls_x509_crt_verify() for more information.
- * \param p_vrfy   The context to be passed to \p f_vrfy.
- *
- * \return         See \c mbedtls_crt_verify_with_profile().
- */
-int mbedtls_x509_crt_verify_with_ca_cb( mbedtls_x509_crt *crt,
-                     mbedtls_x509_crt_ca_cb_t f_ca_cb,
-                     void *p_ca_cb,
-                     const mbedtls_x509_crt_profile *profile,
-                     const char *cn, uint32_t *flags,
-                     int (*f_vrfy)(void *, mbedtls_x509_crt *, int, uint32_t *),
-                     void *p_vrfy );
-
-#endif /* MBEDTLS_X509_TRUSTED_CERTIFICATE_CALLBACK */
-
-#if defined(MBEDTLS_X509_CHECK_KEY_USAGE)
-/**
- * \brief          Check usage of certificate against keyUsage extension.
- *
- * \param crt      Leaf certificate used.
- * \param usage    Intended usage(s) (eg MBEDTLS_X509_KU_KEY_ENCIPHERMENT
- *                 before using the certificate to perform an RSA key
- *                 exchange).
- *
- * \note           Except for decipherOnly and encipherOnly, a bit set in the
- *                 usage argument means this bit MUST be set in the
- *                 certificate. For decipherOnly and encipherOnly, it means
- *                 that bit MAY be set.
- *
- * \return         0 is these uses of the certificate are allowed,
- *                 MBEDTLS_ERR_X509_BAD_INPUT_DATA if the keyUsage extension
- *                 is present but does not match the usage argument.
- *
- * \note           You should only call this function on leaf certificates, on
- *                 (intermediate) CAs the keyUsage extension is automatically
- *                 checked by \c mbedtls_x509_crt_verify().
- */
-int mbedtls_x509_crt_check_key_usage( const mbedtls_x509_crt *crt,
-                                      unsigned int usage );
-#endif /* MBEDTLS_X509_CHECK_KEY_USAGE) */
-
-#if defined(MBEDTLS_X509_CHECK_EXTENDED_KEY_USAGE)
-/**
- * \brief           Check usage of certificate against extendedKeyUsage.
- *
- * \param crt       Leaf certificate used.
- * \param usage_oid Intended usage (eg MBEDTLS_OID_SERVER_AUTH or
- *                  MBEDTLS_OID_CLIENT_AUTH).
- * \param usage_len Length of usage_oid (eg given by MBEDTLS_OID_SIZE()).
- *
- * \return          0 if this use of the certificate is allowed,
- *                  MBEDTLS_ERR_X509_BAD_INPUT_DATA if not.
- *
- * \note            Usually only makes sense on leaf certificates.
- */
-int mbedtls_x509_crt_check_extended_key_usage( const mbedtls_x509_crt *crt,
-                                               const char *usage_oid,
-                                               size_t usage_len );
-#endif /* MBEDTLS_X509_CHECK_EXTENDED_KEY_USAGE */
-
-#if defined(MBEDTLS_X509_CRL_PARSE_C)
-/**
- * \brief          Verify the certificate revocation status
- *
- * \param crt      a certificate to be verified
- * \param crl      the CRL to verify against
- *
- * \return         1 if the certificate is revoked, 0 otherwise
- *
- */
-int mbedtls_x509_crt_is_revoked( const mbedtls_x509_crt *crt, const mbedtls_x509_crl *crl );
-#endif /* MBEDTLS_X509_CRL_PARSE_C */
-
-/**
- * \brief          Initialize a certificate (chain)
- *
- * \param crt      Certificate chain to initialize
- */
-void mbedtls_x509_crt_init( mbedtls_x509_crt *crt );
-
-/**
- * \brief          Unallocate all certificate data
- *
- * \param crt      Certificate chain to free
- */
-void mbedtls_x509_crt_free( mbedtls_x509_crt *crt );
-
-#if defined(MBEDTLS_ECDSA_C) && defined(MBEDTLS_ECP_RESTARTABLE)
-/**
- * \brief           Initialize a restart context
- */
-void mbedtls_x509_crt_restart_init( mbedtls_x509_crt_restart_ctx *ctx );
-
-/**
- * \brief           Free the components of a restart context
- */
-void mbedtls_x509_crt_restart_free( mbedtls_x509_crt_restart_ctx *ctx );
-#endif /* MBEDTLS_ECDSA_C && MBEDTLS_ECP_RESTARTABLE */
-#endif /* MBEDTLS_X509_CRT_PARSE_C */
-
-/* \} name */
-/* \} addtogroup x509_module */
-
-#if defined(MBEDTLS_X509_CRT_WRITE_C)
-/**
- * \brief           Initialize a CRT writing context
- *
- * \param ctx       CRT context to initialize
- */
-void mbedtls_x509write_crt_init( mbedtls_x509write_cert *ctx );
-
-/**
- * \brief           Set the verion for a Certificate
- *                  Default: MBEDTLS_X509_CRT_VERSION_3
- *
- * \param ctx       CRT context to use
- * \param version   version to set (MBEDTLS_X509_CRT_VERSION_1, MBEDTLS_X509_CRT_VERSION_2 or
- *                                  MBEDTLS_X509_CRT_VERSION_3)
- */
-void mbedtls_x509write_crt_set_version( mbedtls_x509write_cert *ctx, int version );
-
-/**
- * \brief           Set the serial number for a Certificate.
- *
- * \param ctx       CRT context to use
- * \param serial    serial number to set
- *
- * \return          0 if successful
- */
-int mbedtls_x509write_crt_set_serial( mbedtls_x509write_cert *ctx, const mbedtls_mpi *serial );
-
-/**
- * \brief           Set the validity period for a Certificate
- *                  Timestamps should be in string format for UTC timezone
- *                  i.e. "YYYYMMDDhhmmss"
- *                  e.g. "20131231235959" for December 31st 2013
- *                       at 23:59:59
- *
- * \param ctx       CRT context to use
- * \param not_before    not_before timestamp
- * \param not_after     not_after timestamp
- *
- * \return          0 if timestamp was parsed successfully, or
- *                  a specific error code
- */
-int mbedtls_x509write_crt_set_validity( mbedtls_x509write_cert *ctx, const char *not_before,
-                                const char *not_after );
-
-/**
- * \brief           Set the issuer name for a Certificate
- *                  Issuer names should contain a comma-separated list
- *                  of OID types and values:
- *                  e.g. "C=UK,O=ARM,CN=mbed TLS CA"
- *
- * \param ctx           CRT context to use
- * \param issuer_name   issuer name to set
- *
- * \return          0 if issuer name was parsed successfully, or
- *                  a specific error code
- */
-int mbedtls_x509write_crt_set_issuer_name( mbedtls_x509write_cert *ctx,
-                                   const char *issuer_name );
-
-/**
- * \brief           Set the subject name for a Certificate
- *                  Subject names should contain a comma-separated list
- *                  of OID types and values:
- *                  e.g. "C=UK,O=ARM,CN=mbed TLS Server 1"
- *
- * \param ctx           CRT context to use
- * \param subject_name  subject name to set
- *
- * \return          0 if subject name was parsed successfully, or
- *                  a specific error code
- */
-int mbedtls_x509write_crt_set_subject_name( mbedtls_x509write_cert *ctx,
-                                    const char *subject_name );
-
-/**
- * \brief           Set the subject public key for the certificate
- *
- * \param ctx       CRT context to use
- * \param key       public key to include
- */
-void mbedtls_x509write_crt_set_subject_key( mbedtls_x509write_cert *ctx, mbedtls_pk_context *key );
-
-/**
- * \brief           Set the issuer key used for signing the certificate
- *
- * \param ctx       CRT context to use
- * \param key       private key to sign with
- */
-void mbedtls_x509write_crt_set_issuer_key( mbedtls_x509write_cert *ctx, mbedtls_pk_context *key );
-
-/**
- * \brief           Set the MD algorithm to use for the signature
- *                  (e.g. MBEDTLS_MD_SHA1)
- *
- * \param ctx       CRT context to use
- * \param md_alg    MD algorithm to use
- */
-void mbedtls_x509write_crt_set_md_alg( mbedtls_x509write_cert *ctx, mbedtls_md_type_t md_alg );
-
-/**
- * \brief           Generic function to add to or replace an extension in the
- *                  CRT
- *
- * \param ctx       CRT context to use
- * \param oid       OID of the extension
- * \param oid_len   length of the OID
- * \param critical  if the extension is critical (per the RFC's definition)
- * \param val       value of the extension OCTET STRING
- * \param val_len   length of the value data
- *
- * \return          0 if successful, or a MBEDTLS_ERR_X509_ALLOC_FAILED
- */
-int mbedtls_x509write_crt_set_extension( mbedtls_x509write_cert *ctx,
-                                 const char *oid, size_t oid_len,
-                                 int critical,
-                                 const unsigned char *val, size_t val_len );
-
-/**
- * \brief           Set the basicConstraints extension for a CRT
- *
- * \param ctx       CRT context to use
- * \param is_ca     is this a CA certificate
- * \param max_pathlen   maximum length of certificate chains below this
- *                      certificate (only for CA certificates, -1 is
- *                      inlimited)
- *
- * \return          0 if successful, or a MBEDTLS_ERR_X509_ALLOC_FAILED
- */
-int mbedtls_x509write_crt_set_basic_constraints( mbedtls_x509write_cert *ctx,
-                                         int is_ca, int max_pathlen );
-
-#if defined(MBEDTLS_SHA1_C)
-/**
- * \brief           Set the subjectKeyIdentifier extension for a CRT
- *                  Requires that mbedtls_x509write_crt_set_subject_key() has been
- *                  called before
- *
- * \param ctx       CRT context to use
- *
- * \return          0 if successful, or a MBEDTLS_ERR_X509_ALLOC_FAILED
- */
-int mbedtls_x509write_crt_set_subject_key_identifier( mbedtls_x509write_cert *ctx );
-
-/**
- * \brief           Set the authorityKeyIdentifier extension for a CRT
- *                  Requires that mbedtls_x509write_crt_set_issuer_key() has been
- *                  called before
- *
- * \param ctx       CRT context to use
- *
- * \return          0 if successful, or a MBEDTLS_ERR_X509_ALLOC_FAILED
- */
-int mbedtls_x509write_crt_set_authority_key_identifier( mbedtls_x509write_cert *ctx );
-#endif /* MBEDTLS_SHA1_C */
-
-/**
- * \brief           Set the Key Usage Extension flags
- *                  (e.g. MBEDTLS_X509_KU_DIGITAL_SIGNATURE | MBEDTLS_X509_KU_KEY_CERT_SIGN)
- *
- * \param ctx       CRT context to use
- * \param key_usage key usage flags to set
- *
- * \return          0 if successful, or MBEDTLS_ERR_X509_ALLOC_FAILED
- */
-int mbedtls_x509write_crt_set_key_usage( mbedtls_x509write_cert *ctx,
-                                         unsigned int key_usage );
-
-/**
- * \brief           Set the Netscape Cert Type flags
- *                  (e.g. MBEDTLS_X509_NS_CERT_TYPE_SSL_CLIENT | MBEDTLS_X509_NS_CERT_TYPE_EMAIL)
- *
- * \param ctx           CRT context to use
- * \param ns_cert_type  Netscape Cert Type flags to set
- *
- * \return          0 if successful, or MBEDTLS_ERR_X509_ALLOC_FAILED
- */
-int mbedtls_x509write_crt_set_ns_cert_type( mbedtls_x509write_cert *ctx,
-                                    unsigned char ns_cert_type );
-
-/**
- * \brief           Free the contents of a CRT write context
- *
- * \param ctx       CRT context to free
- */
-void mbedtls_x509write_crt_free( mbedtls_x509write_cert *ctx );
-
-/**
- * \brief           Write a built up certificate to a X509 DER structure
- *                  Note: data is written at the end of the buffer! Use the
- *                        return value to determine where you should start
- *                        using the buffer
- *
- * \param ctx       certificate to write away
- * \param buf       buffer to write to
- * \param size      size of the buffer
- * \param f_rng     RNG function (for signature, see note)
- * \param p_rng     RNG parameter
- *
- * \return          length of data written if successful, or a specific
- *                  error code
- *
- * \note            f_rng may be NULL if RSA is used for signature and the
- *                  signature is made offline (otherwise f_rng is desirable
- *                  for countermeasures against timing attacks).
- *                  ECDSA signatures always require a non-NULL f_rng.
- */
-int mbedtls_x509write_crt_der( mbedtls_x509write_cert *ctx, unsigned char *buf, size_t size,
-                       int (*f_rng)(void *, unsigned char *, size_t),
-                       void *p_rng );
-
-#if defined(MBEDTLS_PEM_WRITE_C)
-/**
- * \brief           Write a built up certificate to a X509 PEM string
- *
- * \param ctx       certificate to write away
- * \param buf       buffer to write to
- * \param size      size of the buffer
- * \param f_rng     RNG function (for signature, see note)
- * \param p_rng     RNG parameter
- *
- * \return          0 if successful, or a specific error code
- *
- * \note            f_rng may be NULL if RSA is used for signature and the
- *                  signature is made offline (otherwise f_rng is desirable
- *                  for countermeasures against timing attacks).
- *                  ECDSA signatures always require a non-NULL f_rng.
- */
-int mbedtls_x509write_crt_pem( mbedtls_x509write_cert *ctx, unsigned char *buf, size_t size,
-                       int (*f_rng)(void *, unsigned char *, size_t),
-                       void *p_rng );
-#endif /* MBEDTLS_PEM_WRITE_C */
-#endif /* MBEDTLS_X509_CRT_WRITE_C */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* mbedtls_x509_crt.h */