Removed old mbedtls, replacing with submodule.

1 files changed, 0 insertions, 314 deletions

diff --git a/lib/mbedtls-2.27.0/include/mbedtls/sha512.h b/lib/mbedtls-2.27.0/include/mbedtls/sha512.h
deleted file mode 100644
index 4a8ab42..0000000
--- a/lib/mbedtls-2.27.0/include/mbedtls/sha512.h
+++ /dev/null
@@ -1,314 +0,0 @@
-/**
- * \file sha512.h
- * \brief This file contains SHA-384 and SHA-512 definitions and functions.
- *
- * The Secure Hash Algorithms 384 and 512 (SHA-384 and SHA-512) cryptographic
- * hash functions are defined in <em>FIPS 180-4: Secure Hash Standard (SHS)</em>.
- */
-/*
- *  Copyright The Mbed TLS Contributors
- *  SPDX-License-Identifier: Apache-2.0
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may
- *  not use this file except in compliance with the License.
- *  You may obtain a copy of the License at
- *
- *  http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software
- *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
- *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- *  See the License for the specific language governing permissions and
- *  limitations under the License.
- */
-#ifndef MBEDTLS_SHA512_H
-#define MBEDTLS_SHA512_H
-
-#if !defined(MBEDTLS_CONFIG_FILE)
-#include "mbedtls/config.h"
-#else
-#include MBEDTLS_CONFIG_FILE
-#endif
-
-#include <stddef.h>
-#include <stdint.h>
-
-/* MBEDTLS_ERR_SHA512_HW_ACCEL_FAILED is deprecated and should not be used. */
-#define MBEDTLS_ERR_SHA512_HW_ACCEL_FAILED                -0x0039  /**< SHA-512 hardware accelerator failed */
-#define MBEDTLS_ERR_SHA512_BAD_INPUT_DATA                 -0x0075  /**< SHA-512 input data was malformed. */
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#if !defined(MBEDTLS_SHA512_ALT)
-// Regular implementation
-//
-
-/**
- * \brief          The SHA-512 context structure.
- *
- *                 The structure is used both for SHA-384 and for SHA-512
- *                 checksum calculations. The choice between these two is
- *                 made in the call to mbedtls_sha512_starts_ret().
- */
-typedef struct mbedtls_sha512_context
-{
-    uint64_t total[2];          /*!< The number of Bytes processed. */
-    uint64_t state[8];          /*!< The intermediate digest state. */
-    unsigned char buffer[128];  /*!< The data block being processed. */
-#if !defined(MBEDTLS_SHA512_NO_SHA384)
-    int is384;                  /*!< Determines which function to use:
-                                     0: Use SHA-512, or 1: Use SHA-384. */
-#endif
-}
-mbedtls_sha512_context;
-
-#else  /* MBEDTLS_SHA512_ALT */
-#include "sha512_alt.h"
-#endif /* MBEDTLS_SHA512_ALT */
-
-/**
- * \brief          This function initializes a SHA-512 context.
- *
- * \param ctx      The SHA-512 context to initialize. This must
- *                 not be \c NULL.
- */
-void mbedtls_sha512_init( mbedtls_sha512_context *ctx );
-
-/**
- * \brief          This function clears a SHA-512 context.
- *
- * \param ctx      The SHA-512 context to clear. This may be \c NULL,
- *                 in which case this function does nothing. If it
- *                 is not \c NULL, it must point to an initialized
- *                 SHA-512 context.
- */
-void mbedtls_sha512_free( mbedtls_sha512_context *ctx );
-
-/**
- * \brief          This function clones the state of a SHA-512 context.
- *
- * \param dst      The destination context. This must be initialized.
- * \param src      The context to clone. This must be initialized.
- */
-void mbedtls_sha512_clone( mbedtls_sha512_context *dst,
-                           const mbedtls_sha512_context *src );
-
-/**
- * \brief          This function starts a SHA-384 or SHA-512 checksum
- *                 calculation.
- *
- * \param ctx      The SHA-512 context to use. This must be initialized.
- * \param is384    Determines which function to use. This must be
- *                 either \c 0 for SHA-512, or \c 1 for SHA-384.
- *
- * \note           When \c MBEDTLS_SHA512_NO_SHA384 is defined, \p is384 must
- *                 be \c 0, or the function will return
- *                 #MBEDTLS_ERR_SHA512_BAD_INPUT_DATA.
- *
- * \return         \c 0 on success.
- * \return         A negative error code on failure.
- */
-int mbedtls_sha512_starts_ret( mbedtls_sha512_context *ctx, int is384 );
-
-/**
- * \brief          This function feeds an input buffer into an ongoing
- *                 SHA-512 checksum calculation.
- *
- * \param ctx      The SHA-512 context. This must be initialized
- *                 and have a hash operation started.
- * \param input    The buffer holding the input data. This must
- *                 be a readable buffer of length \p ilen Bytes.
- * \param ilen     The length of the input data in Bytes.
- *
- * \return         \c 0 on success.
- * \return         A negative error code on failure.
- */
-int mbedtls_sha512_update_ret( mbedtls_sha512_context *ctx,
-                    const unsigned char *input,
-                    size_t ilen );
-
-/**
- * \brief          This function finishes the SHA-512 operation, and writes
- *                 the result to the output buffer.
- *
- * \param ctx      The SHA-512 context. This must be initialized
- *                 and have a hash operation started.
- * \param output   The SHA-384 or SHA-512 checksum result.
- *                 This must be a writable buffer of length \c 64 Bytes.
- *
- * \return         \c 0 on success.
- * \return         A negative error code on failure.
- */
-int mbedtls_sha512_finish_ret( mbedtls_sha512_context *ctx,
-                               unsigned char output[64] );
-
-/**
- * \brief          This function processes a single data block within
- *                 the ongoing SHA-512 computation.
- *                 This function is for internal use only.
- *
- * \param ctx      The SHA-512 context. This must be initialized.
- * \param data     The buffer holding one block of data. This
- *                 must be a readable buffer of length \c 128 Bytes.
- *
- * \return         \c 0 on success.
- * \return         A negative error code on failure.
- */
-int mbedtls_internal_sha512_process( mbedtls_sha512_context *ctx,
-                                     const unsigned char data[128] );
-#if !defined(MBEDTLS_DEPRECATED_REMOVED)
-#if defined(MBEDTLS_DEPRECATED_WARNING)
-#define MBEDTLS_DEPRECATED      __attribute__((deprecated))
-#else
-#define MBEDTLS_DEPRECATED
-#endif
-/**
- * \brief          This function starts a SHA-384 or SHA-512 checksum
- *                 calculation.
- *
- * \deprecated     Superseded by mbedtls_sha512_starts_ret() in 2.7.0
- *
- * \param ctx      The SHA-512 context to use. This must be initialized.
- * \param is384    Determines which function to use. This must be either
- *                 \c 0 for SHA-512 or \c 1 for SHA-384.
- *
- * \note           When \c MBEDTLS_SHA512_NO_SHA384 is defined, \p is384 must
- *                 be \c 0, or the function will fail to work.
- */
-MBEDTLS_DEPRECATED void mbedtls_sha512_starts( mbedtls_sha512_context *ctx,
-                                               int is384 );
-
-/**
- * \brief          This function feeds an input buffer into an ongoing
- *                 SHA-512 checksum calculation.
- *
- * \deprecated     Superseded by mbedtls_sha512_update_ret() in 2.7.0.
- *
- * \param ctx      The SHA-512 context. This must be initialized
- *                 and have a hash operation started.
- * \param input    The buffer holding the data. This must be a readable
- *                 buffer of length \p ilen Bytes.
- * \param ilen     The length of the input data in Bytes.
- */
-MBEDTLS_DEPRECATED void mbedtls_sha512_update( mbedtls_sha512_context *ctx,
-                                               const unsigned char *input,
-                                               size_t ilen );
-
-/**
- * \brief          This function finishes the SHA-512 operation, and writes
- *                 the result to the output buffer.
- *
- * \deprecated     Superseded by mbedtls_sha512_finish_ret() in 2.7.0.
- *
- * \param ctx      The SHA-512 context. This must be initialized
- *                 and have a hash operation started.
- * \param output   The SHA-384 or SHA-512 checksum result. This must
- *                 be a writable buffer of size \c 64 Bytes.
- */
-MBEDTLS_DEPRECATED void mbedtls_sha512_finish( mbedtls_sha512_context *ctx,
-                                               unsigned char output[64] );
-
-/**
- * \brief          This function processes a single data block within
- *                 the ongoing SHA-512 computation. This function is for
- *                 internal use only.
- *
- * \deprecated     Superseded by mbedtls_internal_sha512_process() in 2.7.0.
- *
- * \param ctx      The SHA-512 context. This must be initialized.
- * \param data     The buffer holding one block of data. This must be
- *                 a readable buffer of length \c 128 Bytes.
- */
-MBEDTLS_DEPRECATED void mbedtls_sha512_process(
-                                            mbedtls_sha512_context *ctx,
-                                            const unsigned char data[128] );
-
-#undef MBEDTLS_DEPRECATED
-#endif /* !MBEDTLS_DEPRECATED_REMOVED */
-
-/**
- * \brief          This function calculates the SHA-512 or SHA-384
- *                 checksum of a buffer.
- *
- *                 The function allocates the context, performs the
- *                 calculation, and frees the context.
- *
- *                 The SHA-512 result is calculated as
- *                 output = SHA-512(input buffer).
- *
- * \param input    The buffer holding the input data. This must be
- *                 a readable buffer of length \p ilen Bytes.
- * \param ilen     The length of the input data in Bytes.
- * \param output   The SHA-384 or SHA-512 checksum result.
- *                 This must be a writable buffer of length \c 64 Bytes.
- * \param is384    Determines which function to use. This must be either
- *                 \c 0 for SHA-512, or \c 1 for SHA-384.
- *
- * \note           When \c MBEDTLS_SHA512_NO_SHA384 is defined, \p is384 must
- *                 be \c 0, or the function will return
- *                 #MBEDTLS_ERR_SHA512_BAD_INPUT_DATA.
- *
- * \return         \c 0 on success.
- * \return         A negative error code on failure.
- */
-int mbedtls_sha512_ret( const unsigned char *input,
-                        size_t ilen,
-                        unsigned char output[64],
-                        int is384 );
-
-#if !defined(MBEDTLS_DEPRECATED_REMOVED)
-#if defined(MBEDTLS_DEPRECATED_WARNING)
-#define MBEDTLS_DEPRECATED      __attribute__((deprecated))
-#else
-#define MBEDTLS_DEPRECATED
-#endif
-
-/**
- * \brief          This function calculates the SHA-512 or SHA-384
- *                 checksum of a buffer.
- *
- *                 The function allocates the context, performs the
- *                 calculation, and frees the context.
- *
- *                 The SHA-512 result is calculated as
- *                 output = SHA-512(input buffer).
- *
- * \deprecated     Superseded by mbedtls_sha512_ret() in 2.7.0
- *
- * \param input    The buffer holding the data. This must be a
- *                 readable buffer of length \p ilen Bytes.
- * \param ilen     The length of the input data in Bytes.
- * \param output   The SHA-384 or SHA-512 checksum result. This must
- *                 be a writable buffer of length \c 64 Bytes.
- * \param is384    Determines which function to use. This must be either
- *                 \c 0 for SHA-512, or \c 1 for SHA-384.
- *
- * \note           When \c MBEDTLS_SHA512_NO_SHA384 is defined, \p is384 must
- *                 be \c 0, or the function will fail to work.
- */
-MBEDTLS_DEPRECATED void mbedtls_sha512( const unsigned char *input,
-                                        size_t ilen,
-                                        unsigned char output[64],
-                                        int is384 );
-
-#undef MBEDTLS_DEPRECATED
-#endif /* !MBEDTLS_DEPRECATED_REMOVED */
-
-#if defined(MBEDTLS_SELF_TEST)
-
- /**
- * \brief          The SHA-384 or SHA-512 checkup routine.
- *
- * \return         \c 0 on success.
- * \return         \c 1 on failure.
- */
-int mbedtls_sha512_self_test( int verbose );
-#endif /* MBEDTLS_SELF_TEST */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* mbedtls_sha512.h */