Removed old mbedtls, replacing with submodule.

1 files changed, 0 insertions, 324 deletions

diff --git a/lib/mbedtls-2.27.0/include/mbedtls/gcm.h b/lib/mbedtls-2.27.0/include/mbedtls/gcm.h
deleted file mode 100644
index 6b67361..0000000
--- a/lib/mbedtls-2.27.0/include/mbedtls/gcm.h
+++ /dev/null
@@ -1,324 +0,0 @@
-/**
- * \file gcm.h
- *
- * \brief This file contains GCM definitions and functions.
- *
- * The Galois/Counter Mode (GCM) for 128-bit block ciphers is defined
- * in <em>D. McGrew, J. Viega, The Galois/Counter Mode of Operation
- * (GCM), Natl. Inst. Stand. Technol.</em>
- *
- * For more information on GCM, see <em>NIST SP 800-38D: Recommendation for
- * Block Cipher Modes of Operation: Galois/Counter Mode (GCM) and GMAC</em>.
- *
- */
-/*
- *  Copyright The Mbed TLS Contributors
- *  SPDX-License-Identifier: Apache-2.0
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may
- *  not use this file except in compliance with the License.
- *  You may obtain a copy of the License at
- *
- *  http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software
- *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
- *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- *  See the License for the specific language governing permissions and
- *  limitations under the License.
- */
-
-#ifndef MBEDTLS_GCM_H
-#define MBEDTLS_GCM_H
-
-#if !defined(MBEDTLS_CONFIG_FILE)
-#include "mbedtls/config.h"
-#else
-#include MBEDTLS_CONFIG_FILE
-#endif
-
-#include "mbedtls/cipher.h"
-
-#include <stdint.h>
-
-#define MBEDTLS_GCM_ENCRYPT     1
-#define MBEDTLS_GCM_DECRYPT     0
-
-#define MBEDTLS_ERR_GCM_AUTH_FAILED                       -0x0012  /**< Authenticated decryption failed. */
-
-/* MBEDTLS_ERR_GCM_HW_ACCEL_FAILED is deprecated and should not be used. */
-#define MBEDTLS_ERR_GCM_HW_ACCEL_FAILED                   -0x0013  /**< GCM hardware accelerator failed. */
-
-#define MBEDTLS_ERR_GCM_BAD_INPUT                         -0x0014  /**< Bad input parameters to function. */
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#if !defined(MBEDTLS_GCM_ALT)
-
-/**
- * \brief          The GCM context structure.
- */
-typedef struct mbedtls_gcm_context
-{
-    mbedtls_cipher_context_t cipher_ctx;  /*!< The cipher context used. */
-    uint64_t HL[16];                      /*!< Precalculated HTable low. */
-    uint64_t HH[16];                      /*!< Precalculated HTable high. */
-    uint64_t len;                         /*!< The total length of the encrypted data. */
-    uint64_t add_len;                     /*!< The total length of the additional data. */
-    unsigned char base_ectr[16];          /*!< The first ECTR for tag. */
-    unsigned char y[16];                  /*!< The Y working value. */
-    unsigned char buf[16];                /*!< The buf working value. */
-    int mode;                             /*!< The operation to perform:
-                                               #MBEDTLS_GCM_ENCRYPT or
-                                               #MBEDTLS_GCM_DECRYPT. */
-}
-mbedtls_gcm_context;
-
-#else  /* !MBEDTLS_GCM_ALT */
-#include "gcm_alt.h"
-#endif /* !MBEDTLS_GCM_ALT */
-
-/**
- * \brief           This function initializes the specified GCM context,
- *                  to make references valid, and prepares the context
- *                  for mbedtls_gcm_setkey() or mbedtls_gcm_free().
- *
- *                  The function does not bind the GCM context to a particular
- *                  cipher, nor set the key. For this purpose, use
- *                  mbedtls_gcm_setkey().
- *
- * \param ctx       The GCM context to initialize. This must not be \c NULL.
- */
-void mbedtls_gcm_init( mbedtls_gcm_context *ctx );
-
-/**
- * \brief           This function associates a GCM context with a
- *                  cipher algorithm and a key.
- *
- * \param ctx       The GCM context. This must be initialized.
- * \param cipher    The 128-bit block cipher to use.
- * \param key       The encryption key. This must be a readable buffer of at
- *                  least \p keybits bits.
- * \param keybits   The key size in bits. Valid options are:
- *                  <ul><li>128 bits</li>
- *                  <li>192 bits</li>
- *                  <li>256 bits</li></ul>
- *
- * \return          \c 0 on success.
- * \return          A cipher-specific error code on failure.
- */
-int mbedtls_gcm_setkey( mbedtls_gcm_context *ctx,
-                        mbedtls_cipher_id_t cipher,
-                        const unsigned char *key,
-                        unsigned int keybits );
-
-/**
- * \brief           This function performs GCM encryption or decryption of a buffer.
- *
- * \note            For encryption, the output buffer can be the same as the
- *                  input buffer. For decryption, the output buffer cannot be
- *                  the same as input buffer. If the buffers overlap, the output
- *                  buffer must trail at least 8 Bytes behind the input buffer.
- *
- * \warning         When this function performs a decryption, it outputs the
- *                  authentication tag and does not verify that the data is
- *                  authentic. You should use this function to perform encryption
- *                  only. For decryption, use mbedtls_gcm_auth_decrypt() instead.
- *
- * \param ctx       The GCM context to use for encryption or decryption. This
- *                  must be initialized.
- * \param mode      The operation to perform:
- *                  - #MBEDTLS_GCM_ENCRYPT to perform authenticated encryption.
- *                    The ciphertext is written to \p output and the
- *                    authentication tag is written to \p tag.
- *                  - #MBEDTLS_GCM_DECRYPT to perform decryption.
- *                    The plaintext is written to \p output and the
- *                    authentication tag is written to \p tag.
- *                    Note that this mode is not recommended, because it does
- *                    not verify the authenticity of the data. For this reason,
- *                    you should use mbedtls_gcm_auth_decrypt() instead of
- *                    calling this function in decryption mode.
- * \param length    The length of the input data, which is equal to the length
- *                  of the output data.
- * \param iv        The initialization vector. This must be a readable buffer of
- *                  at least \p iv_len Bytes.
- * \param iv_len    The length of the IV.
- * \param add       The buffer holding the additional data. This must be of at
- *                  least that size in Bytes.
- * \param add_len   The length of the additional data.
- * \param input     The buffer holding the input data. If \p length is greater
- *                  than zero, this must be a readable buffer of at least that
- *                  size in Bytes.
- * \param output    The buffer for holding the output data. If \p length is greater
- *                  than zero, this must be a writable buffer of at least that
- *                  size in Bytes.
- * \param tag_len   The length of the tag to generate.
- * \param tag       The buffer for holding the tag. This must be a writable
- *                  buffer of at least \p tag_len Bytes.
- *
- * \return          \c 0 if the encryption or decryption was performed
- *                  successfully. Note that in #MBEDTLS_GCM_DECRYPT mode,
- *                  this does not indicate that the data is authentic.
- * \return          #MBEDTLS_ERR_GCM_BAD_INPUT if the lengths or pointers are
- *                  not valid or a cipher-specific error code if the encryption
- *                  or decryption failed.
- */
-int mbedtls_gcm_crypt_and_tag( mbedtls_gcm_context *ctx,
-                       int mode,
-                       size_t length,
-                       const unsigned char *iv,
-                       size_t iv_len,
-                       const unsigned char *add,
-                       size_t add_len,
-                       const unsigned char *input,
-                       unsigned char *output,
-                       size_t tag_len,
-                       unsigned char *tag );
-
-/**
- * \brief           This function performs a GCM authenticated decryption of a
- *                  buffer.
- *
- * \note            For decryption, the output buffer cannot be the same as
- *                  input buffer. If the buffers overlap, the output buffer
- *                  must trail at least 8 Bytes behind the input buffer.
- *
- * \param ctx       The GCM context. This must be initialized.
- * \param length    The length of the ciphertext to decrypt, which is also
- *                  the length of the decrypted plaintext.
- * \param iv        The initialization vector. This must be a readable buffer
- *                  of at least \p iv_len Bytes.
- * \param iv_len    The length of the IV.
- * \param add       The buffer holding the additional data. This must be of at
- *                  least that size in Bytes.
- * \param add_len   The length of the additional data.
- * \param tag       The buffer holding the tag to verify. This must be a
- *                  readable buffer of at least \p tag_len Bytes.
- * \param tag_len   The length of the tag to verify.
- * \param input     The buffer holding the ciphertext. If \p length is greater
- *                  than zero, this must be a readable buffer of at least that
- *                  size.
- * \param output    The buffer for holding the decrypted plaintext. If \p length
- *                  is greater than zero, this must be a writable buffer of at
- *                  least that size.
- *
- * \return          \c 0 if successful and authenticated.
- * \return          #MBEDTLS_ERR_GCM_AUTH_FAILED if the tag does not match.
- * \return          #MBEDTLS_ERR_GCM_BAD_INPUT if the lengths or pointers are
- *                  not valid or a cipher-specific error code if the decryption
- *                  failed.
- */
-int mbedtls_gcm_auth_decrypt( mbedtls_gcm_context *ctx,
-                      size_t length,
-                      const unsigned char *iv,
-                      size_t iv_len,
-                      const unsigned char *add,
-                      size_t add_len,
-                      const unsigned char *tag,
-                      size_t tag_len,
-                      const unsigned char *input,
-                      unsigned char *output );
-
-/**
- * \brief           This function starts a GCM encryption or decryption
- *                  operation.
- *
- * \param ctx       The GCM context. This must be initialized.
- * \param mode      The operation to perform: #MBEDTLS_GCM_ENCRYPT or
- *                  #MBEDTLS_GCM_DECRYPT.
- * \param iv        The initialization vector. This must be a readable buffer of
- *                  at least \p iv_len Bytes.
- * \param iv_len    The length of the IV.
- * \param add       The buffer holding the additional data, or \c NULL
- *                  if \p add_len is \c 0.
- * \param add_len   The length of the additional data. If \c 0,
- *                  \p add may be \c NULL.
- *
- * \return          \c 0 on success.
- */
-int mbedtls_gcm_starts( mbedtls_gcm_context *ctx,
-                int mode,
-                const unsigned char *iv,
-                size_t iv_len,
-                const unsigned char *add,
-                size_t add_len );
-
-/**
- * \brief           This function feeds an input buffer into an ongoing GCM
- *                  encryption or decryption operation.
- *
- *    `             The function expects input to be a multiple of 16
- *                  Bytes. Only the last call before calling
- *                  mbedtls_gcm_finish() can be less than 16 Bytes.
- *
- * \note            For decryption, the output buffer cannot be the same as
- *                  input buffer. If the buffers overlap, the output buffer
- *                  must trail at least 8 Bytes behind the input buffer.
- *
- * \param ctx       The GCM context. This must be initialized.
- * \param length    The length of the input data. This must be a multiple of
- *                  16 except in the last call before mbedtls_gcm_finish().
- * \param input     The buffer holding the input data. If \p length is greater
- *                  than zero, this must be a readable buffer of at least that
- *                  size in Bytes.
- * \param output    The buffer for holding the output data. If \p length is
- *                  greater than zero, this must be a writable buffer of at
- *                  least that size in Bytes.
- *
- * \return         \c 0 on success.
- * \return         #MBEDTLS_ERR_GCM_BAD_INPUT on failure.
- */
-int mbedtls_gcm_update( mbedtls_gcm_context *ctx,
-                size_t length,
-                const unsigned char *input,
-                unsigned char *output );
-
-/**
- * \brief           This function finishes the GCM operation and generates
- *                  the authentication tag.
- *
- *                  It wraps up the GCM stream, and generates the
- *                  tag. The tag can have a maximum length of 16 Bytes.
- *
- * \param ctx       The GCM context. This must be initialized.
- * \param tag       The buffer for holding the tag. This must be a writable
- *                  buffer of at least \p tag_len Bytes.
- * \param tag_len   The length of the tag to generate. This must be at least
- *                  four.
- *
- * \return          \c 0 on success.
- * \return          #MBEDTLS_ERR_GCM_BAD_INPUT on failure.
- */
-int mbedtls_gcm_finish( mbedtls_gcm_context *ctx,
-                unsigned char *tag,
-                size_t tag_len );
-
-/**
- * \brief           This function clears a GCM context and the underlying
- *                  cipher sub-context.
- *
- * \param ctx       The GCM context to clear. If this is \c NULL, the call has
- *                  no effect. Otherwise, this must be initialized.
- */
-void mbedtls_gcm_free( mbedtls_gcm_context *ctx );
-
-#if defined(MBEDTLS_SELF_TEST)
-
-/**
- * \brief          The GCM checkup routine.
- *
- * \return         \c 0 on success.
- * \return         \c 1 on failure.
- */
-int mbedtls_gcm_self_test( int verbose );
-
-#endif /* MBEDTLS_SELF_TEST */
-
-#ifdef __cplusplus
-}
-#endif
-
-
-#endif /* gcm.h */