Removed old mbedtls, replacing with submodule.

1 files changed, 0 insertions, 324 deletions

diff --git a/lib/mbedtls-2.27.0/include/mbedtls/camellia.h b/lib/mbedtls-2.27.0/include/mbedtls/camellia.h
deleted file mode 100644
index f7d2b23..0000000
--- a/lib/mbedtls-2.27.0/include/mbedtls/camellia.h
+++ /dev/null
@@ -1,324 +0,0 @@
-/**
- * \file camellia.h
- *
- * \brief Camellia block cipher
- */
-/*
- *  Copyright The Mbed TLS Contributors
- *  SPDX-License-Identifier: Apache-2.0
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may
- *  not use this file except in compliance with the License.
- *  You may obtain a copy of the License at
- *
- *  http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software
- *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
- *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- *  See the License for the specific language governing permissions and
- *  limitations under the License.
- */
-#ifndef MBEDTLS_CAMELLIA_H
-#define MBEDTLS_CAMELLIA_H
-
-#if !defined(MBEDTLS_CONFIG_FILE)
-#include "mbedtls/config.h"
-#else
-#include MBEDTLS_CONFIG_FILE
-#endif
-
-#include <stddef.h>
-#include <stdint.h>
-
-#include "mbedtls/platform_util.h"
-
-#define MBEDTLS_CAMELLIA_ENCRYPT     1
-#define MBEDTLS_CAMELLIA_DECRYPT     0
-
-#if !defined(MBEDTLS_DEPRECATED_REMOVED)
-#define MBEDTLS_ERR_CAMELLIA_INVALID_KEY_LENGTH   MBEDTLS_DEPRECATED_NUMERIC_CONSTANT( -0x0024 )
-#endif /* !MBEDTLS_DEPRECATED_REMOVED */
-#define MBEDTLS_ERR_CAMELLIA_BAD_INPUT_DATA -0x0024 /**< Bad input data. */
-
-#define MBEDTLS_ERR_CAMELLIA_INVALID_INPUT_LENGTH -0x0026 /**< Invalid data input length. */
-
-/* MBEDTLS_ERR_CAMELLIA_HW_ACCEL_FAILED is deprecated and should not be used.
- */
-#define MBEDTLS_ERR_CAMELLIA_HW_ACCEL_FAILED              -0x0027  /**< Camellia hardware accelerator failed. */
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#if !defined(MBEDTLS_CAMELLIA_ALT)
-// Regular implementation
-//
-
-/**
- * \brief          CAMELLIA context structure
- */
-typedef struct mbedtls_camellia_context
-{
-    int nr;                     /*!<  number of rounds  */
-    uint32_t rk[68];            /*!<  CAMELLIA round keys    */
-}
-mbedtls_camellia_context;
-
-#else  /* MBEDTLS_CAMELLIA_ALT */
-#include "camellia_alt.h"
-#endif /* MBEDTLS_CAMELLIA_ALT */
-
-/**
- * \brief          Initialize a CAMELLIA context.
- *
- * \param ctx      The CAMELLIA context to be initialized.
- *                 This must not be \c NULL.
- */
-void mbedtls_camellia_init( mbedtls_camellia_context *ctx );
-
-/**
- * \brief          Clear a CAMELLIA context.
- *
- * \param ctx      The CAMELLIA context to be cleared. This may be \c NULL,
- *                 in which case this function returns immediately. If it is not
- *                 \c NULL, it must be initialized.
- */
-void mbedtls_camellia_free( mbedtls_camellia_context *ctx );
-
-/**
- * \brief          Perform a CAMELLIA key schedule operation for encryption.
- *
- * \param ctx      The CAMELLIA context to use. This must be initialized.
- * \param key      The encryption key to use. This must be a readable buffer
- *                 of size \p keybits Bits.
- * \param keybits  The length of \p key in Bits. This must be either \c 128,
- *                 \c 192 or \c 256.
- *
- * \return         \c 0 if successful.
- * \return         A negative error code on failure.
- */
-int mbedtls_camellia_setkey_enc( mbedtls_camellia_context *ctx,
-                                 const unsigned char *key,
-                                 unsigned int keybits );
-
-/**
- * \brief          Perform a CAMELLIA key schedule operation for decryption.
- *
- * \param ctx      The CAMELLIA context to use. This must be initialized.
- * \param key      The decryption key. This must be a readable buffer
- *                 of size \p keybits Bits.
- * \param keybits  The length of \p key in Bits. This must be either \c 128,
- *                 \c 192 or \c 256.
- *
- * \return         \c 0 if successful.
- * \return         A negative error code on failure.
- */
-int mbedtls_camellia_setkey_dec( mbedtls_camellia_context *ctx,
-                                 const unsigned char *key,
-                                 unsigned int keybits );
-
-/**
- * \brief          Perform a CAMELLIA-ECB block encryption/decryption operation.
- *
- * \param ctx      The CAMELLIA context to use. This must be initialized
- *                 and bound to a key.
- * \param mode     The mode of operation. This must be either
- *                 #MBEDTLS_CAMELLIA_ENCRYPT or #MBEDTLS_CAMELLIA_DECRYPT.
- * \param input    The input block. This must be a readable buffer
- *                 of size \c 16 Bytes.
- * \param output   The output block. This must be a writable buffer
- *                 of size \c 16 Bytes.
- *
- * \return         \c 0 if successful.
- * \return         A negative error code on failure.
- */
-int mbedtls_camellia_crypt_ecb( mbedtls_camellia_context *ctx,
-                    int mode,
-                    const unsigned char input[16],
-                    unsigned char output[16] );
-
-#if defined(MBEDTLS_CIPHER_MODE_CBC)
-/**
- * \brief          Perform a CAMELLIA-CBC buffer encryption/decryption operation.
- *
- * \note           Upon exit, the content of the IV is updated so that you can
- *                 call the function same function again on the following
- *                 block(s) of data and get the same result as if it was
- *                 encrypted in one call. This allows a "streaming" usage.
- *                 If on the other hand you need to retain the contents of the
- *                 IV, you should either save it manually or use the cipher
- *                 module instead.
- *
- * \param ctx      The CAMELLIA context to use. This must be initialized
- *                 and bound to a key.
- * \param mode     The mode of operation. This must be either
- *                 #MBEDTLS_CAMELLIA_ENCRYPT or #MBEDTLS_CAMELLIA_DECRYPT.
- * \param length   The length in Bytes of the input data \p input.
- *                 This must be a multiple of \c 16 Bytes.
- * \param iv       The initialization vector. This must be a read/write buffer
- *                 of length \c 16 Bytes. It is updated to allow streaming
- *                 use as explained above.
- * \param input    The buffer holding the input data. This must point to a
- *                 readable buffer of length \p length Bytes.
- * \param output   The buffer holding the output data. This must point to a
- *                 writable buffer of length \p length Bytes.
- *
- * \return         \c 0 if successful.
- * \return         A negative error code on failure.
- */
-int mbedtls_camellia_crypt_cbc( mbedtls_camellia_context *ctx,
-                    int mode,
-                    size_t length,
-                    unsigned char iv[16],
-                    const unsigned char *input,
-                    unsigned char *output );
-#endif /* MBEDTLS_CIPHER_MODE_CBC */
-
-#if defined(MBEDTLS_CIPHER_MODE_CFB)
-/**
- * \brief          Perform a CAMELLIA-CFB128 buffer encryption/decryption
- *                 operation.
- *
- * \note           Due to the nature of CFB mode, you should use the same
- *                 key for both encryption and decryption. In particular, calls
- *                 to this function should be preceded by a key-schedule via
- *                 mbedtls_camellia_setkey_enc() regardless of whether \p mode
- *                 is #MBEDTLS_CAMELLIA_ENCRYPT or #MBEDTLS_CAMELLIA_DECRYPT.
- *
- * \note           Upon exit, the content of the IV is updated so that you can
- *                 call the function same function again on the following
- *                 block(s) of data and get the same result as if it was
- *                 encrypted in one call. This allows a "streaming" usage.
- *                 If on the other hand you need to retain the contents of the
- *                 IV, you should either save it manually or use the cipher
- *                 module instead.
- *
- * \param ctx      The CAMELLIA context to use. This must be initialized
- *                 and bound to a key.
- * \param mode     The mode of operation. This must be either
- *                 #MBEDTLS_CAMELLIA_ENCRYPT or #MBEDTLS_CAMELLIA_DECRYPT.
- * \param length   The length of the input data \p input. Any value is allowed.
- * \param iv_off   The current offset in the IV. This must be smaller
- *                 than \c 16 Bytes. It is updated after this call to allow
- *                 the aforementioned streaming usage.
- * \param iv       The initialization vector. This must be a read/write buffer
- *                 of length \c 16 Bytes. It is updated after this call to
- *                 allow the aforementioned streaming usage.
- * \param input    The buffer holding the input data. This must be a readable
- *                 buffer of size \p length Bytes.
- * \param output   The buffer to hold the output data. This must be a writable
- *                 buffer of length \p length Bytes.
- *
- * \return         \c 0 if successful.
- * \return         A negative error code on failure.
- */
-int mbedtls_camellia_crypt_cfb128( mbedtls_camellia_context *ctx,
-                       int mode,
-                       size_t length,
-                       size_t *iv_off,
-                       unsigned char iv[16],
-                       const unsigned char *input,
-                       unsigned char *output );
-#endif /* MBEDTLS_CIPHER_MODE_CFB */
-
-#if defined(MBEDTLS_CIPHER_MODE_CTR)
-/**
- * \brief      Perform a CAMELLIA-CTR buffer encryption/decryption operation.
- *
- * *note       Due to the nature of CTR mode, you should use the same
- *             key for both encryption and decryption. In particular, calls
- *             to this function should be preceded by a key-schedule via
- *             mbedtls_camellia_setkey_enc() regardless of whether \p mode
- *             is #MBEDTLS_CAMELLIA_ENCRYPT or #MBEDTLS_CAMELLIA_DECRYPT.
- *
- * \warning    You must never reuse a nonce value with the same key. Doing so
- *             would void the encryption for the two messages encrypted with
- *             the same nonce and key.
- *
- *             There are two common strategies for managing nonces with CTR:
- *
- *             1. You can handle everything as a single message processed over
- *             successive calls to this function. In that case, you want to
- *             set \p nonce_counter and \p nc_off to 0 for the first call, and
- *             then preserve the values of \p nonce_counter, \p nc_off and \p
- *             stream_block across calls to this function as they will be
- *             updated by this function.
- *
- *             With this strategy, you must not encrypt more than 2**128
- *             blocks of data with the same key.
- *
- *             2. You can encrypt separate messages by dividing the \p
- *             nonce_counter buffer in two areas: the first one used for a
- *             per-message nonce, handled by yourself, and the second one
- *             updated by this function internally.
- *
- *             For example, you might reserve the first \c 12 Bytes for the
- *             per-message nonce, and the last \c 4 Bytes for internal use.
- *             In that case, before calling this function on a new message you
- *             need to set the first \c 12 Bytes of \p nonce_counter to your
- *             chosen nonce value, the last four to \c 0, and \p nc_off to \c 0
- *             (which will cause \p stream_block to be ignored). That way, you
- *             can encrypt at most \c 2**96 messages of up to \c 2**32 blocks
- *             each  with the same key.
- *
- *             The per-message nonce (or information sufficient to reconstruct
- *             it) needs to be communicated with the ciphertext and must be
- *             unique. The recommended way to ensure uniqueness is to use a
- *             message counter. An alternative is to generate random nonces,
- *             but this limits the number of messages that can be securely
- *             encrypted: for example, with 96-bit random nonces, you should
- *             not encrypt more than 2**32 messages with the same key.
- *
- *             Note that for both stategies, sizes are measured in blocks and
- *             that a CAMELLIA block is \c 16 Bytes.
- *
- * \warning    Upon return, \p stream_block contains sensitive data. Its
- *             content must not be written to insecure storage and should be
- *             securely discarded as soon as it's no longer needed.
- *
- * \param ctx           The CAMELLIA context to use. This must be initialized
- *                      and bound to a key.
- * \param length        The length of the input data \p input in Bytes.
- *                      Any value is allowed.
- * \param nc_off        The offset in the current \p stream_block (for resuming
- *                      within current cipher stream). The offset pointer to
- *                      should be \c 0 at the start of a stream. It is updated
- *                      at the end of this call.
- * \param nonce_counter The 128-bit nonce and counter. This must be a read/write
- *                      buffer of length \c 16 Bytes.
- * \param stream_block  The saved stream-block for resuming. This must be a
- *                      read/write buffer of length \c 16 Bytes.
- * \param input         The input data stream. This must be a readable buffer of
- *                      size \p length Bytes.
- * \param output        The output data stream. This must be a writable buffer
- *                      of size \p length Bytes.
- *
- * \return              \c 0 if successful.
- * \return              A negative error code on failure.
- */
-int mbedtls_camellia_crypt_ctr( mbedtls_camellia_context *ctx,
-                       size_t length,
-                       size_t *nc_off,
-                       unsigned char nonce_counter[16],
-                       unsigned char stream_block[16],
-                       const unsigned char *input,
-                       unsigned char *output );
-#endif /* MBEDTLS_CIPHER_MODE_CTR */
-
-#if defined(MBEDTLS_SELF_TEST)
-
-/**
- * \brief          Checkup routine
- *
- * \return         0 if successful, or 1 if the test failed
- */
-int mbedtls_camellia_self_test( int verbose );
-
-#endif /* MBEDTLS_SELF_TEST */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* camellia.h */