Removed openssl, and curl, and added mbedded tls.curl-removal

Almost fully removed curl, needs more testing.

Fixed most issues, now trying to cross compile.

Fix?

Sigh.

1 files changed, 673 insertions, 0 deletions

diff --git a/lib/mbedtls-2.27.0/include/mbedtls/aes.h b/lib/mbedtls-2.27.0/include/mbedtls/aes.h
new file mode 100644
index 0000000..052f47c
--- /dev/null
+++ b/lib/mbedtls-2.27.0/include/mbedtls/aes.h
@@ -0,0 +1,673 @@
+/**
+ * \file aes.h
+ *
+ * \brief   This file contains AES definitions and functions.
+ *
+ *          The Advanced Encryption Standard (AES) specifies a FIPS-approved
+ *          cryptographic algorithm that can be used to protect electronic
+ *          data.
+ *
+ *          The AES algorithm is a symmetric block cipher that can
+ *          encrypt and decrypt information. For more information, see
+ *          <em>FIPS Publication 197: Advanced Encryption Standard</em> and
+ *          <em>ISO/IEC 18033-2:2006: Information technology -- Security
+ *          techniques -- Encryption algorithms -- Part 2: Asymmetric
+ *          ciphers</em>.
+ *
+ *          The AES-XTS block mode is standardized by NIST SP 800-38E
+ *          <https://nvlpubs.nist.gov/nistpubs/legacy/sp/nistspecialpublication800-38e.pdf>
+ *          and described in detail by IEEE P1619
+ *          <https://ieeexplore.ieee.org/servlet/opac?punumber=4375278>.
+ */
+
+/*
+ *  Copyright The Mbed TLS Contributors
+ *  SPDX-License-Identifier: Apache-2.0
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may
+ *  not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ */
+
+#ifndef MBEDTLS_AES_H
+#define MBEDTLS_AES_H
+
+#if !defined(MBEDTLS_CONFIG_FILE)
+#include "mbedtls/config.h"
+#else
+#include MBEDTLS_CONFIG_FILE
+#endif
+
+#include <stddef.h>
+#include <stdint.h>
+
+/* padlock.c and aesni.c rely on these values! */
+#define MBEDTLS_AES_ENCRYPT     1 /**< AES encryption. */
+#define MBEDTLS_AES_DECRYPT     0 /**< AES decryption. */
+
+/* Error codes in range 0x0020-0x0022 */
+#define MBEDTLS_ERR_AES_INVALID_KEY_LENGTH                -0x0020  /**< Invalid key length. */
+#define MBEDTLS_ERR_AES_INVALID_INPUT_LENGTH              -0x0022  /**< Invalid data input length. */
+
+/* Error codes in range 0x0021-0x0025 */
+#define MBEDTLS_ERR_AES_BAD_INPUT_DATA                    -0x0021  /**< Invalid input data. */
+
+/* MBEDTLS_ERR_AES_FEATURE_UNAVAILABLE is deprecated and should not be used. */
+#define MBEDTLS_ERR_AES_FEATURE_UNAVAILABLE               -0x0023  /**< Feature not available. For example, an unsupported AES key size. */
+
+/* MBEDTLS_ERR_AES_HW_ACCEL_FAILED is deprecated and should not be used. */
+#define MBEDTLS_ERR_AES_HW_ACCEL_FAILED                   -0x0025  /**< AES hardware accelerator failed. */
+
+#if ( defined(__ARMCC_VERSION) || defined(_MSC_VER) ) && \
+    !defined(inline) && !defined(__cplusplus)
+#define inline __inline
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#if !defined(MBEDTLS_AES_ALT)
+// Regular implementation
+//
+
+/**
+ * \brief The AES context-type definition.
+ */
+typedef struct mbedtls_aes_context
+{
+    int nr;                     /*!< The number of rounds. */
+    uint32_t *rk;               /*!< AES round keys. */
+    uint32_t buf[68];           /*!< Unaligned data buffer. This buffer can
+                                     hold 32 extra Bytes, which can be used for
+                                     one of the following purposes:
+                                     <ul><li>Alignment if VIA padlock is
+                                             used.</li>
+                                     <li>Simplifying key expansion in the 256-bit
+                                         case by generating an extra round key.
+                                         </li></ul> */
+}
+mbedtls_aes_context;
+
+#if defined(MBEDTLS_CIPHER_MODE_XTS)
+/**
+ * \brief The AES XTS context-type definition.
+ */
+typedef struct mbedtls_aes_xts_context
+{
+    mbedtls_aes_context crypt; /*!< The AES context to use for AES block
+                                        encryption or decryption. */
+    mbedtls_aes_context tweak; /*!< The AES context used for tweak
+                                        computation. */
+} mbedtls_aes_xts_context;
+#endif /* MBEDTLS_CIPHER_MODE_XTS */
+
+#else  /* MBEDTLS_AES_ALT */
+#include "aes_alt.h"
+#endif /* MBEDTLS_AES_ALT */
+
+/**
+ * \brief          This function initializes the specified AES context.
+ *
+ *                 It must be the first API called before using
+ *                 the context.
+ *
+ * \param ctx      The AES context to initialize. This must not be \c NULL.
+ */
+void mbedtls_aes_init( mbedtls_aes_context *ctx );
+
+/**
+ * \brief          This function releases and clears the specified AES context.
+ *
+ * \param ctx      The AES context to clear.
+ *                 If this is \c NULL, this function does nothing.
+ *                 Otherwise, the context must have been at least initialized.
+ */
+void mbedtls_aes_free( mbedtls_aes_context *ctx );
+
+#if defined(MBEDTLS_CIPHER_MODE_XTS)
+/**
+ * \brief          This function initializes the specified AES XTS context.
+ *
+ *                 It must be the first API called before using
+ *                 the context.
+ *
+ * \param ctx      The AES XTS context to initialize. This must not be \c NULL.
+ */
+void mbedtls_aes_xts_init( mbedtls_aes_xts_context *ctx );
+
+/**
+ * \brief          This function releases and clears the specified AES XTS context.
+ *
+ * \param ctx      The AES XTS context to clear.
+ *                 If this is \c NULL, this function does nothing.
+ *                 Otherwise, the context must have been at least initialized.
+ */
+void mbedtls_aes_xts_free( mbedtls_aes_xts_context *ctx );
+#endif /* MBEDTLS_CIPHER_MODE_XTS */
+
+/**
+ * \brief          This function sets the encryption key.
+ *
+ * \param ctx      The AES context to which the key should be bound.
+ *                 It must be initialized.
+ * \param key      The encryption key.
+ *                 This must be a readable buffer of size \p keybits bits.
+ * \param keybits  The size of data passed in bits. Valid options are:
+ *                 <ul><li>128 bits</li>
+ *                 <li>192 bits</li>
+ *                 <li>256 bits</li></ul>
+ *
+ * \return         \c 0 on success.
+ * \return         #MBEDTLS_ERR_AES_INVALID_KEY_LENGTH on failure.
+ */
+int mbedtls_aes_setkey_enc( mbedtls_aes_context *ctx, const unsigned char *key,
+                    unsigned int keybits );
+
+/**
+ * \brief          This function sets the decryption key.
+ *
+ * \param ctx      The AES context to which the key should be bound.
+ *                 It must be initialized.
+ * \param key      The decryption key.
+ *                 This must be a readable buffer of size \p keybits bits.
+ * \param keybits  The size of data passed. Valid options are:
+ *                 <ul><li>128 bits</li>
+ *                 <li>192 bits</li>
+ *                 <li>256 bits</li></ul>
+ *
+ * \return         \c 0 on success.
+ * \return         #MBEDTLS_ERR_AES_INVALID_KEY_LENGTH on failure.
+ */
+int mbedtls_aes_setkey_dec( mbedtls_aes_context *ctx, const unsigned char *key,
+                    unsigned int keybits );
+
+#if defined(MBEDTLS_CIPHER_MODE_XTS)
+/**
+ * \brief          This function prepares an XTS context for encryption and
+ *                 sets the encryption key.
+ *
+ * \param ctx      The AES XTS context to which the key should be bound.
+ *                 It must be initialized.
+ * \param key      The encryption key. This is comprised of the XTS key1
+ *                 concatenated with the XTS key2.
+ *                 This must be a readable buffer of size \p keybits bits.
+ * \param keybits  The size of \p key passed in bits. Valid options are:
+ *                 <ul><li>256 bits (each of key1 and key2 is a 128-bit key)</li>
+ *                 <li>512 bits (each of key1 and key2 is a 256-bit key)</li></ul>
+ *
+ * \return         \c 0 on success.
+ * \return         #MBEDTLS_ERR_AES_INVALID_KEY_LENGTH on failure.
+ */
+int mbedtls_aes_xts_setkey_enc( mbedtls_aes_xts_context *ctx,
+                                const unsigned char *key,
+                                unsigned int keybits );
+
+/**
+ * \brief          This function prepares an XTS context for decryption and
+ *                 sets the decryption key.
+ *
+ * \param ctx      The AES XTS context to which the key should be bound.
+ *                 It must be initialized.
+ * \param key      The decryption key. This is comprised of the XTS key1
+ *                 concatenated with the XTS key2.
+ *                 This must be a readable buffer of size \p keybits bits.
+ * \param keybits  The size of \p key passed in bits. Valid options are:
+ *                 <ul><li>256 bits (each of key1 and key2 is a 128-bit key)</li>
+ *                 <li>512 bits (each of key1 and key2 is a 256-bit key)</li></ul>
+ *
+ * \return         \c 0 on success.
+ * \return         #MBEDTLS_ERR_AES_INVALID_KEY_LENGTH on failure.
+ */
+int mbedtls_aes_xts_setkey_dec( mbedtls_aes_xts_context *ctx,
+                                const unsigned char *key,
+                                unsigned int keybits );
+#endif /* MBEDTLS_CIPHER_MODE_XTS */
+
+/**
+ * \brief          This function performs an AES single-block encryption or
+ *                 decryption operation.
+ *
+ *                 It performs the operation defined in the \p mode parameter
+ *                 (encrypt or decrypt), on the input data buffer defined in
+ *                 the \p input parameter.
+ *
+ *                 mbedtls_aes_init(), and either mbedtls_aes_setkey_enc() or
+ *                 mbedtls_aes_setkey_dec() must be called before the first
+ *                 call to this API with the same context.
+ *
+ * \param ctx      The AES context to use for encryption or decryption.
+ *                 It must be initialized and bound to a key.
+ * \param mode     The AES operation: #MBEDTLS_AES_ENCRYPT or
+ *                 #MBEDTLS_AES_DECRYPT.
+ * \param input    The buffer holding the input data.
+ *                 It must be readable and at least \c 16 Bytes long.
+ * \param output   The buffer where the output data will be written.
+ *                 It must be writeable and at least \c 16 Bytes long.
+
+ * \return         \c 0 on success.
+ */
+int mbedtls_aes_crypt_ecb( mbedtls_aes_context *ctx,
+                    int mode,
+                    const unsigned char input[16],
+                    unsigned char output[16] );
+
+#if defined(MBEDTLS_CIPHER_MODE_CBC)
+/**
+ * \brief  This function performs an AES-CBC encryption or decryption operation
+ *         on full blocks.
+ *
+ *         It performs the operation defined in the \p mode
+ *         parameter (encrypt/decrypt), on the input data buffer defined in
+ *         the \p input parameter.
+ *
+ *         It can be called as many times as needed, until all the input
+ *         data is processed. mbedtls_aes_init(), and either
+ *         mbedtls_aes_setkey_enc() or mbedtls_aes_setkey_dec() must be called
+ *         before the first call to this API with the same context.
+ *
+ * \note   This function operates on full blocks, that is, the input size
+ *         must be a multiple of the AES block size of \c 16 Bytes.
+ *
+ * \note   Upon exit, the content of the IV is updated so that you can
+ *         call the same function again on the next
+ *         block(s) of data and get the same result as if it was
+ *         encrypted in one call. This allows a "streaming" usage.
+ *         If you need to retain the contents of the IV, you should
+ *         either save it manually or use the cipher module instead.
+ *
+ *
+ * \param ctx      The AES context to use for encryption or decryption.
+ *                 It must be initialized and bound to a key.
+ * \param mode     The AES operation: #MBEDTLS_AES_ENCRYPT or
+ *                 #MBEDTLS_AES_DECRYPT.
+ * \param length   The length of the input data in Bytes. This must be a
+ *                 multiple of the block size (\c 16 Bytes).
+ * \param iv       Initialization vector (updated after use).
+ *                 It must be a readable and writeable buffer of \c 16 Bytes.
+ * \param input    The buffer holding the input data.
+ *                 It must be readable and of size \p length Bytes.
+ * \param output   The buffer holding the output data.
+ *                 It must be writeable and of size \p length Bytes.
+ *
+ * \return         \c 0 on success.
+ * \return         #MBEDTLS_ERR_AES_INVALID_INPUT_LENGTH
+ *                 on failure.
+ */
+int mbedtls_aes_crypt_cbc( mbedtls_aes_context *ctx,
+                    int mode,
+                    size_t length,
+                    unsigned char iv[16],
+                    const unsigned char *input,
+                    unsigned char *output );
+#endif /* MBEDTLS_CIPHER_MODE_CBC */
+
+#if defined(MBEDTLS_CIPHER_MODE_XTS)
+/**
+ * \brief      This function performs an AES-XTS encryption or decryption
+ *             operation for an entire XTS data unit.
+ *
+ *             AES-XTS encrypts or decrypts blocks based on their location as
+ *             defined by a data unit number. The data unit number must be
+ *             provided by \p data_unit.
+ *
+ *             NIST SP 800-38E limits the maximum size of a data unit to 2^20
+ *             AES blocks. If the data unit is larger than this, this function
+ *             returns #MBEDTLS_ERR_AES_INVALID_INPUT_LENGTH.
+ *
+ * \param ctx          The AES XTS context to use for AES XTS operations.
+ *                     It must be initialized and bound to a key.
+ * \param mode         The AES operation: #MBEDTLS_AES_ENCRYPT or
+ *                     #MBEDTLS_AES_DECRYPT.
+ * \param length       The length of a data unit in Bytes. This can be any
+ *                     length between 16 bytes and 2^24 bytes inclusive
+ *                     (between 1 and 2^20 block cipher blocks).
+ * \param data_unit    The address of the data unit encoded as an array of 16
+ *                     bytes in little-endian format. For disk encryption, this
+ *                     is typically the index of the block device sector that
+ *                     contains the data.
+ * \param input        The buffer holding the input data (which is an entire
+ *                     data unit). This function reads \p length Bytes from \p
+ *                     input.
+ * \param output       The buffer holding the output data (which is an entire
+ *                     data unit). This function writes \p length Bytes to \p
+ *                     output.
+ *
+ * \return             \c 0 on success.
+ * \return             #MBEDTLS_ERR_AES_INVALID_INPUT_LENGTH if \p length is
+ *                     smaller than an AES block in size (16 Bytes) or if \p
+ *                     length is larger than 2^20 blocks (16 MiB).
+ */
+int mbedtls_aes_crypt_xts( mbedtls_aes_xts_context *ctx,
+                           int mode,
+                           size_t length,
+                           const unsigned char data_unit[16],
+                           const unsigned char *input,
+                           unsigned char *output );
+#endif /* MBEDTLS_CIPHER_MODE_XTS */
+
+#if defined(MBEDTLS_CIPHER_MODE_CFB)
+/**
+ * \brief This function performs an AES-CFB128 encryption or decryption
+ *        operation.
+ *
+ *        It performs the operation defined in the \p mode
+ *        parameter (encrypt or decrypt), on the input data buffer
+ *        defined in the \p input parameter.
+ *
+ *        For CFB, you must set up the context with mbedtls_aes_setkey_enc(),
+ *        regardless of whether you are performing an encryption or decryption
+ *        operation, that is, regardless of the \p mode parameter. This is
+ *        because CFB mode uses the same key schedule for encryption and
+ *        decryption.
+ *
+ * \note  Upon exit, the content of the IV is updated so that you can
+ *        call the same function again on the next
+ *        block(s) of data and get the same result as if it was
+ *        encrypted in one call. This allows a "streaming" usage.
+ *        If you need to retain the contents of the
+ *        IV, you must either save it manually or use the cipher
+ *        module instead.
+ *
+ *
+ * \param ctx      The AES context to use for encryption or decryption.
+ *                 It must be initialized and bound to a key.
+ * \param mode     The AES operation: #MBEDTLS_AES_ENCRYPT or
+ *                 #MBEDTLS_AES_DECRYPT.
+ * \param length   The length of the input data in Bytes.
+ * \param iv_off   The offset in IV (updated after use).
+ *                 It must point to a valid \c size_t.
+ * \param iv       The initialization vector (updated after use).
+ *                 It must be a readable and writeable buffer of \c 16 Bytes.
+ * \param input    The buffer holding the input data.
+ *                 It must be readable and of size \p length Bytes.
+ * \param output   The buffer holding the output data.
+ *                 It must be writeable and of size \p length Bytes.
+ *
+ * \return         \c 0 on success.
+ */
+int mbedtls_aes_crypt_cfb128( mbedtls_aes_context *ctx,
+                       int mode,
+                       size_t length,
+                       size_t *iv_off,
+                       unsigned char iv[16],
+                       const unsigned char *input,
+                       unsigned char *output );
+
+/**
+ * \brief This function performs an AES-CFB8 encryption or decryption
+ *        operation.
+ *
+ *        It performs the operation defined in the \p mode
+ *        parameter (encrypt/decrypt), on the input data buffer defined
+ *        in the \p input parameter.
+ *
+ *        Due to the nature of CFB, you must use the same key schedule for
+ *        both encryption and decryption operations. Therefore, you must
+ *        use the context initialized with mbedtls_aes_setkey_enc() for
+ *        both #MBEDTLS_AES_ENCRYPT and #MBEDTLS_AES_DECRYPT.
+ *
+ * \note  Upon exit, the content of the IV is updated so that you can
+ *        call the same function again on the next
+ *        block(s) of data and get the same result as if it was
+ *        encrypted in one call. This allows a "streaming" usage.
+ *        If you need to retain the contents of the
+ *        IV, you should either save it manually or use the cipher
+ *        module instead.
+ *
+ *
+ * \param ctx      The AES context to use for encryption or decryption.
+ *                 It must be initialized and bound to a key.
+ * \param mode     The AES operation: #MBEDTLS_AES_ENCRYPT or
+ *                 #MBEDTLS_AES_DECRYPT
+ * \param length   The length of the input data.
+ * \param iv       The initialization vector (updated after use).
+ *                 It must be a readable and writeable buffer of \c 16 Bytes.
+ * \param input    The buffer holding the input data.
+ *                 It must be readable and of size \p length Bytes.
+ * \param output   The buffer holding the output data.
+ *                 It must be writeable and of size \p length Bytes.
+ *
+ * \return         \c 0 on success.
+ */
+int mbedtls_aes_crypt_cfb8( mbedtls_aes_context *ctx,
+                    int mode,
+                    size_t length,
+                    unsigned char iv[16],
+                    const unsigned char *input,
+                    unsigned char *output );
+#endif /*MBEDTLS_CIPHER_MODE_CFB */
+
+#if defined(MBEDTLS_CIPHER_MODE_OFB)
+/**
+ * \brief       This function performs an AES-OFB (Output Feedback Mode)
+ *              encryption or decryption operation.
+ *
+ *              For OFB, you must set up the context with
+ *              mbedtls_aes_setkey_enc(), regardless of whether you are
+ *              performing an encryption or decryption operation. This is
+ *              because OFB mode uses the same key schedule for encryption and
+ *              decryption.
+ *
+ *              The OFB operation is identical for encryption or decryption,
+ *              therefore no operation mode needs to be specified.
+ *
+ * \note        Upon exit, the content of iv, the Initialisation Vector, is
+ *              updated so that you can call the same function again on the next
+ *              block(s) of data and get the same result as if it was encrypted
+ *              in one call. This allows a "streaming" usage, by initialising
+ *              iv_off to 0 before the first call, and preserving its value
+ *              between calls.
+ *
+ *              For non-streaming use, the iv should be initialised on each call
+ *              to a unique value, and iv_off set to 0 on each call.
+ *
+ *              If you need to retain the contents of the initialisation vector,
+ *              you must either save it manually or use the cipher module
+ *              instead.
+ *
+ * \warning     For the OFB mode, the initialisation vector must be unique
+ *              every encryption operation. Reuse of an initialisation vector
+ *              will compromise security.
+ *
+ * \param ctx      The AES context to use for encryption or decryption.
+ *                 It must be initialized and bound to a key.
+ * \param length   The length of the input data.
+ * \param iv_off   The offset in IV (updated after use).
+ *                 It must point to a valid \c size_t.
+ * \param iv       The initialization vector (updated after use).
+ *                 It must be a readable and writeable buffer of \c 16 Bytes.
+ * \param input    The buffer holding the input data.
+ *                 It must be readable and of size \p length Bytes.
+ * \param output   The buffer holding the output data.
+ *                 It must be writeable and of size \p length Bytes.
+ *
+ * \return         \c 0 on success.
+ */
+int mbedtls_aes_crypt_ofb( mbedtls_aes_context *ctx,
+                       size_t length,
+                       size_t *iv_off,
+                       unsigned char iv[16],
+                       const unsigned char *input,
+                       unsigned char *output );
+
+#endif /* MBEDTLS_CIPHER_MODE_OFB */
+
+#if defined(MBEDTLS_CIPHER_MODE_CTR)
+/**
+ * \brief      This function performs an AES-CTR encryption or decryption
+ *             operation.
+ *
+ *             This function performs the operation defined in the \p mode
+ *             parameter (encrypt/decrypt), on the input data buffer
+ *             defined in the \p input parameter.
+ *
+ *             Due to the nature of CTR, you must use the same key schedule
+ *             for both encryption and decryption operations. Therefore, you
+ *             must use the context initialized with mbedtls_aes_setkey_enc()
+ *             for both #MBEDTLS_AES_ENCRYPT and #MBEDTLS_AES_DECRYPT.
+ *
+ * \warning    You must never reuse a nonce value with the same key. Doing so
+ *             would void the encryption for the two messages encrypted with
+ *             the same nonce and key.
+ *
+ *             There are two common strategies for managing nonces with CTR:
+ *
+ *             1. You can handle everything as a single message processed over
+ *             successive calls to this function. In that case, you want to
+ *             set \p nonce_counter and \p nc_off to 0 for the first call, and
+ *             then preserve the values of \p nonce_counter, \p nc_off and \p
+ *             stream_block across calls to this function as they will be
+ *             updated by this function.
+ *
+ *             With this strategy, you must not encrypt more than 2**128
+ *             blocks of data with the same key.
+ *
+ *             2. You can encrypt separate messages by dividing the \p
+ *             nonce_counter buffer in two areas: the first one used for a
+ *             per-message nonce, handled by yourself, and the second one
+ *             updated by this function internally.
+ *
+ *             For example, you might reserve the first 12 bytes for the
+ *             per-message nonce, and the last 4 bytes for internal use. In that
+ *             case, before calling this function on a new message you need to
+ *             set the first 12 bytes of \p nonce_counter to your chosen nonce
+ *             value, the last 4 to 0, and \p nc_off to 0 (which will cause \p
+ *             stream_block to be ignored). That way, you can encrypt at most
+ *             2**96 messages of up to 2**32 blocks each with the same key.
+ *
+ *             The per-message nonce (or information sufficient to reconstruct
+ *             it) needs to be communicated with the ciphertext and must be unique.
+ *             The recommended way to ensure uniqueness is to use a message
+ *             counter. An alternative is to generate random nonces, but this
+ *             limits the number of messages that can be securely encrypted:
+ *             for example, with 96-bit random nonces, you should not encrypt
+ *             more than 2**32 messages with the same key.
+ *
+ *             Note that for both stategies, sizes are measured in blocks and
+ *             that an AES block is 16 bytes.
+ *
+ * \warning    Upon return, \p stream_block contains sensitive data. Its
+ *             content must not be written to insecure storage and should be
+ *             securely discarded as soon as it's no longer needed.
+ *
+ * \param ctx              The AES context to use for encryption or decryption.
+ *                         It must be initialized and bound to a key.
+ * \param length           The length of the input data.
+ * \param nc_off           The offset in the current \p stream_block, for
+ *                         resuming within the current cipher stream. The
+ *                         offset pointer should be 0 at the start of a stream.
+ *                         It must point to a valid \c size_t.
+ * \param nonce_counter    The 128-bit nonce and counter.
+ *                         It must be a readable-writeable buffer of \c 16 Bytes.
+ * \param stream_block     The saved stream block for resuming. This is
+ *                         overwritten by the function.
+ *                         It must be a readable-writeable buffer of \c 16 Bytes.
+ * \param input            The buffer holding the input data.
+ *                         It must be readable and of size \p length Bytes.
+ * \param output           The buffer holding the output data.
+ *                         It must be writeable and of size \p length Bytes.
+ *
+ * \return                 \c 0 on success.
+ */
+int mbedtls_aes_crypt_ctr( mbedtls_aes_context *ctx,
+                       size_t length,
+                       size_t *nc_off,
+                       unsigned char nonce_counter[16],
+                       unsigned char stream_block[16],
+                       const unsigned char *input,
+                       unsigned char *output );
+#endif /* MBEDTLS_CIPHER_MODE_CTR */
+
+/**
+ * \brief           Internal AES block encryption function. This is only
+ *                  exposed to allow overriding it using
+ *                  \c MBEDTLS_AES_ENCRYPT_ALT.
+ *
+ * \param ctx       The AES context to use for encryption.
+ * \param input     The plaintext block.
+ * \param output    The output (ciphertext) block.
+ *
+ * \return          \c 0 on success.
+ */
+int mbedtls_internal_aes_encrypt( mbedtls_aes_context *ctx,
+                                  const unsigned char input[16],
+                                  unsigned char output[16] );
+
+/**
+ * \brief           Internal AES block decryption function. This is only
+ *                  exposed to allow overriding it using see
+ *                  \c MBEDTLS_AES_DECRYPT_ALT.
+ *
+ * \param ctx       The AES context to use for decryption.
+ * \param input     The ciphertext block.
+ * \param output    The output (plaintext) block.
+ *
+ * \return          \c 0 on success.
+ */
+int mbedtls_internal_aes_decrypt( mbedtls_aes_context *ctx,
+                                  const unsigned char input[16],
+                                  unsigned char output[16] );
+
+#if !defined(MBEDTLS_DEPRECATED_REMOVED)
+#if defined(MBEDTLS_DEPRECATED_WARNING)
+#define MBEDTLS_DEPRECATED      __attribute__((deprecated))
+#else
+#define MBEDTLS_DEPRECATED
+#endif
+/**
+ * \brief           Deprecated internal AES block encryption function
+ *                  without return value.
+ *
+ * \deprecated      Superseded by mbedtls_internal_aes_encrypt()
+ *
+ * \param ctx       The AES context to use for encryption.
+ * \param input     Plaintext block.
+ * \param output    Output (ciphertext) block.
+ */
+MBEDTLS_DEPRECATED void mbedtls_aes_encrypt( mbedtls_aes_context *ctx,
+                                             const unsigned char input[16],
+                                             unsigned char output[16] );
+
+/**
+ * \brief           Deprecated internal AES block decryption function
+ *                  without return value.
+ *
+ * \deprecated      Superseded by mbedtls_internal_aes_decrypt()
+ *
+ * \param ctx       The AES context to use for decryption.
+ * \param input     Ciphertext block.
+ * \param output    Output (plaintext) block.
+ */
+MBEDTLS_DEPRECATED void mbedtls_aes_decrypt( mbedtls_aes_context *ctx,
+                                             const unsigned char input[16],
+                                             unsigned char output[16] );
+
+#undef MBEDTLS_DEPRECATED
+#endif /* !MBEDTLS_DEPRECATED_REMOVED */
+
+
+#if defined(MBEDTLS_SELF_TEST)
+/**
+ * \brief          Checkup routine.
+ *
+ * \return         \c 0 on success.
+ * \return         \c 1 on failure.
+ */
+int mbedtls_aes_self_test( int verbose );
+
+#endif /* MBEDTLS_SELF_TEST */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* aes.h */