path: root/SOURCES/patch-5.11-redhat.patch

 Documentation/ABI/testing/sysfs-platform_profile   |  24 +
 Documentation/admin-guide/kdump/kdump.rst          |  11 +
 .../admin-guide/laptops/thinkpad-acpi.rst          |  25 +
 .../bindings/display/panel/xingbangda,xbd599.yaml  |  50 ++
 Documentation/userspace-api/index.rst              |   1 +
 .../userspace-api/sysfs-platform_profile.rst       |  42 ++
 Makefile                                           |   1 +
 arch/arm/Kconfig                                   |   4 +-
 arch/arm/include/asm/uaccess.h                     |   8 +-
 arch/arm64/Kconfig                                 |   3 +-
 .../boot/dts/rockchip/rk3399-pinebook-pro.dts      |   2 +-
 arch/powerpc/kvm/book3s_hv.c                       |   4 +
 arch/s390/include/asm/ipl.h                        |   1 +
 arch/s390/kernel/ipl.c                             |   5 +
 arch/s390/kernel/setup.c                           |   4 +
 arch/x86/kernel/setup.c                            |  22 +-
 arch/x86/kvm/hyperv.c                              |   2 +-
 drivers/acpi/Kconfig                               |   3 +
 drivers/acpi/Makefile                              |   1 +
 drivers/acpi/apei/hest.c                           |   8 +
 drivers/acpi/irq.c                                 |  17 +-
 drivers/acpi/pci_mcfg.c                            |   7 +
 drivers/acpi/platform_profile.c                    | 177 +++++++
 drivers/acpi/scan.c                                |   9 +
 drivers/ata/libahci.c                              |  18 +
 drivers/char/ipmi/ipmi_dmi.c                       |  15 +
 drivers/char/ipmi/ipmi_msghandler.c                |  16 +-
 drivers/firmware/efi/Makefile                      |   1 +
 drivers/firmware/efi/efi.c                         | 124 +++--
 drivers/firmware/efi/secureboot.c                  |  38 ++
 drivers/gpu/drm/i915/display/intel_bw.c            |  80 +---
 drivers/gpu/drm/i915/display/intel_dp.c            |  11 +-
 .../gpu/drm/i915/display/intel_dp_link_training.c  |  91 ++--
 .../gpu/drm/i915/display/intel_dp_link_training.h  |   2 +-
 drivers/gpu/drm/i915/display/intel_psr.c           |  14 +
 drivers/gpu/drm/i915/i915_drv.c                    |   5 +-
 drivers/gpu/drm/i915/i915_drv.h                    |   1 +
 drivers/gpu/drm/i915/intel_dram.c                  |  82 +++-
 drivers/gpu/drm/panel/Kconfig                      |   9 +
 drivers/gpu/drm/panel/Makefile                     |   1 +
 drivers/gpu/drm/panel/panel-xingbangda-xbd599.c    | 366 +++++++++++++++
 drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c             |  10 +-
 drivers/hid/hid-rmi.c                              |  64 ---
 drivers/input/rmi4/rmi_driver.c                    | 124 +++--
 drivers/iommu/iommu.c                              |  22 +
 drivers/pci/controller/dwc/Kconfig                 |  10 +-
 drivers/pci/controller/dwc/Makefile                |   2 +-
 drivers/pci/controller/dwc/pcie-tegra194.c         | 102 +++++
 drivers/pci/controller/pcie-brcmstb.c              |   1 +
 drivers/pci/quirks.c                               |  24 +
 drivers/platform/x86/Kconfig                       |   2 +
 drivers/platform/x86/ideapad-laptop.c              | 289 ++++++++++++
 drivers/platform/x86/thinkpad_acpi.c               | 510 ++++++++++++++++++++-
 drivers/scsi/smartpqi/smartpqi_init.c              |  16 +
 drivers/usb/core/hub.c                             |   7 +
 include/linux/efi.h                                |  22 +-
 include/linux/lsm_hook_defs.h                      |   2 +
 include/linux/lsm_hooks.h                          |   6 +
 include/linux/pci-ecam.h                           |   1 +
 include/linux/platform_profile.h                   |  41 ++
 include/linux/rmi.h                                |   1 +
 include/linux/security.h                           |   5 +
 kernel/crash_core.c                                |  28 +-
 kernel/module_signing.c                            |   9 +-
 mm/kmemleak.c                                      |   5 +
 security/integrity/platform_certs/load_uefi.c      |   6 +-
 security/lockdown/Kconfig                          |  13 +
 security/lockdown/lockdown.c                       |   1 +
 security/security.c                                |   6 +
 sound/hda/Kconfig                                  |  14 +
 sound/hda/intel-dsp-config.c                       |  29 +-
 sound/soc/sof/intel/apl.c                          |   3 +-
 sound/soc/sof/intel/cnl.c                          |   3 +-
 sound/soc/sof/intel/hda-dsp.c                      |   6 +
 sound/soc/sof/intel/hda.h                          |   1 +
 sound/soc/sof/intel/icl.c                          |   3 +-
 sound/soc/sof/intel/tgl.c                          |   1 +
 sound/soc/sof/ops.h                                |   8 +
 sound/soc/sof/sof-pci-dev.c                        |   2 +-
 sound/soc/sof/sof-priv.h                           |   4 +-
 80 files changed, 2378 insertions(+), 330 deletions(-)

diff --git a/Documentation/ABI/testing/sysfs-platform_profile b/Documentation/ABI/testing/sysfs-platform_profile
new file mode 100644
index 000000000000..9d6b89b66cca
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-platform_profile
@@ -0,0 +1,24 @@
+What:		/sys/firmware/acpi/platform_profile_choices
+Date:		October 2020
+Contact:	Hans de Goede <hdegoede@redhat.com>
+Description:	This file contains a space-separated list of profiles supported for this device.
+
+		Drivers must use the following standard profile-names:
+
+		============	============================================
+		low-power	Low power consumption
+		cool		Cooler operation
+		quiet		Quieter operation
+		balanced	Balance between low power consumption and performance
+		performance	High performance operation
+		============	============================================
+
+		Userspace may expect drivers to offer more than one of these
+		standard profile names.
+
+What:		/sys/firmware/acpi/platform_profile
+Date:		October 2020
+Contact:	Hans de Goede <hdegoede@redhat.com>
+Description:	Reading this file gives the current selected profile for this
+		device. Writing this file with one of the strings from
+		platform_profile_choices changes the profile to the new value.
diff --git a/Documentation/admin-guide/kdump/kdump.rst b/Documentation/admin-guide/kdump/kdump.rst
index 75a9dd98e76e..3ff3291551f9 100644
--- a/Documentation/admin-guide/kdump/kdump.rst
+++ b/Documentation/admin-guide/kdump/kdump.rst
@@ -285,6 +285,17 @@ This would mean:
     2) if the RAM size is between 512M and 2G (exclusive), then reserve 64M
     3) if the RAM size is larger than 2G, then reserve 128M

+Or you can use crashkernel=auto if you have enough memory.  The threshold
+is 2G on x86_64, arm64, ppc64 and ppc64le. The threshold is 4G for s390x.
+If your system memory is less than the threshold crashkernel=auto will not
+reserve memory.
+
+The automatically reserved memory size varies based on architecture.
+The size changes according to system memory size like below:
+    x86_64: 1G-64G:160M,64G-1T:256M,1T-:512M
+    s390x:  4G-64G:160M,64G-1T:256M,1T-:512M
+    arm64:  2G-:512M
+    ppc64:  2G-4G:384M,4G-16G:512M,16G-64G:1G,64G-128G:2G,128G-:4G


 Boot into System Kernel
diff --git a/Documentation/admin-guide/laptops/thinkpad-acpi.rst b/Documentation/admin-guide/laptops/thinkpad-acpi.rst
index 5fe1ade88c17..3b225ae47f1a 100644
--- a/Documentation/admin-guide/laptops/thinkpad-acpi.rst
+++ b/Documentation/admin-guide/laptops/thinkpad-acpi.rst
@@ -51,6 +51,7 @@ detailed description):
 	- UWB enable and disable
 	- LCD Shadow (PrivacyGuard) enable and disable
 	- Lap mode sensor
+	- Setting keyboard language

 A compatibility table by model and feature is maintained on the web
 site, http://ibm-acpi.sf.net/. I appreciate any success or failure
@@ -1466,6 +1467,30 @@ Sysfs notes
 	rfkill controller switch "tpacpi_uwb_sw": refer to
 	Documentation/driver-api/rfkill.rst for details.

+
+Setting keyboard language
+-------------------
+
+sysfs: keyboard_lang
+
+This feature is used to set keyboard language to ECFW using ASL interface.
+Fewer thinkpads models like T580 , T590 , T15 Gen 1 etc.. has "=", "(',
+")" numeric keys, which are not displaying correctly, when keyboard language
+is other than "english". This is because the default keyboard language in ECFW
+is set as "english". Hence using this sysfs, user can set the correct keyboard
+language to ECFW and then these key's will work correctly.
+
+Example of command to set keyboard language is mentioned below::
+
+        echo jp > /sys/devices/platform/thinkpad_acpi/keyboard_lang
+
+Text corresponding to keyboard layout to be set in sysfs are: be(Belgian),
+cz(Czech), da(Danish), de(German), en(English), es(Spain), et(Estonian),
+fr(French), fr-ch(French(Switzerland)), hu(Hungarian), it(Italy), jp (Japan),
+nl(Dutch), nn(Norway), pl(Polish), pt(portugese), sl(Slovenian), sv(Sweden),
+tr(Turkey)
+
+
 Adaptive keyboard
 -----------------

diff --git a/Documentation/devicetree/bindings/display/panel/xingbangda,xbd599.yaml b/Documentation/devicetree/bindings/display/panel/xingbangda,xbd599.yaml
new file mode 100644
index 000000000000..b27bcf11198f
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/xingbangda,xbd599.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/xingbangda,xbd599.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xingbangda XBD599 5.99in MIPI-DSI LCD panel
+
+maintainers:
+  - Icenowy Zheng <icenowy@aosc.io>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: xingbangda,xbd599
+  reg: true
+  backlight: true
+  reset-gpios: true
+  vcc-supply:
+    description: regulator that supplies the VCC voltage
+  iovcc-supply:
+    description: regulator that supplies the IOVCC voltage
+
+required:
+  - compatible
+  - reg
+  - backlight
+  - vcc-supply
+  - iovcc-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "xingbangda,xbd599";
+            reg = <0>;
+            backlight = <&backlight>;
+            iovcc-supply = <&reg_dldo2>;
+            vcc-supply = <&reg_ldo_io0>;
+        };
+    };
+
+...
diff --git a/Documentation/userspace-api/index.rst b/Documentation/userspace-api/index.rst
index acd2cc2a538d..d29b020e5622 100644
--- a/Documentation/userspace-api/index.rst
+++ b/Documentation/userspace-api/index.rst
@@ -24,6 +24,7 @@ place where this information is gathered.
    ioctl/index
    iommu
    media/index
+   sysfs-platform_profile

 .. only::  subproject and html

diff --git a/Documentation/userspace-api/sysfs-platform_profile.rst b/Documentation/userspace-api/sysfs-platform_profile.rst
new file mode 100644
index 000000000000..c33a71263d9e
--- /dev/null
+++ b/Documentation/userspace-api/sysfs-platform_profile.rst
@@ -0,0 +1,42 @@
+=====================================================================
+Platform Profile Selection (e.g. /sys/firmware/acpi/platform_profile)
+=====================================================================
+
+On modern systems the platform performance, temperature, fan and other
+hardware related characteristics are often dynamically configurable. The
+platform configuration is often automatically adjusted to the current
+conditions by some automatic mechanism (which may very well live outside
+the kernel).
+
+These auto platform adjustment mechanisms often can be configured with
+one of several platform profiles, with either a bias towards low power
+operation or towards performance.
+
+The purpose of the platform_profile attribute is to offer a generic sysfs
+API for selecting the platform profile of these automatic mechanisms.
+
+Note that this API is only for selecting the platform profile, it is
+NOT a goal of this API to allow monitoring the resulting performance
+characteristics. Monitoring performance is best done with device/vendor
+specific tools such as e.g. turbostat.
+
+Specifically when selecting a high performance profile the actual achieved
+performance may be limited by various factors such as: the heat generated
+by other components, room temperature, free air flow at the bottom of a
+laptop, etc. It is explicitly NOT a goal of this API to let userspace know
+about any sub-optimal conditions which are impeding reaching the requested
+performance level.
+
+Since numbers on their own cannot represent the multiple variables that a
+profile will adjust (power consumption, heat generation, etc) this API
+uses strings to describe the various profiles. To make sure that userspace
+gets a consistent experience the sysfs-platform_profile ABI document defines
+a fixed set of profile names. Drivers *must* map their internal profile
+representation onto this fixed set.
+
+If there is no good match when mapping then a new profile name may be
+added. Drivers which wish to introduce new profile names must:
+
+ 1. Explain why the existing profile names canot be used.
+ 2. Add the new profile name, along with a clear description of the
+    expected behaviour, to the sysfs-platform_profile ABI documentation.
diff --git a/Makefile b/Makefile
index bcd8764fead9..f58195f60045 100644
--- a/Makefile
+++ b/Makefile
@@ -495,6 +495,7 @@ KBUILD_AFLAGS   := -D__ASSEMBLY__ -fno-PIE
 KBUILD_CFLAGS   := -Wall -Wundef -Werror=strict-prototypes -Wno-trigraphs \
 		   -fno-strict-aliasing -fno-common -fshort-wchar -fno-PIE \
 		   -Werror=implicit-function-declaration -Werror=implicit-int \
+		   -Wno-address-of-packed-member \
 		   -Werror=return-type -Wno-format-security \
 		   -std=gnu89
 KBUILD_CPPFLAGS := -D__KERNEL__
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 138248999df7..b962482a442e 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1492,9 +1492,9 @@ config HIGHMEM
 	  If unsure, say n.

 config HIGHPTE
-	bool "Allocate 2nd-level pagetables from highmem" if EXPERT
+	bool "Allocate 2nd-level pagetables from highmem"
 	depends on HIGHMEM
-	default y
+	default n
 	help
 	  The VM uses one page of physical memory for each page table.
 	  For systems with a lot of processes, this can use a lot of
diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h
index a13d90206472..6a6aae01755b 100644
--- a/arch/arm/include/asm/uaccess.h
+++ b/arch/arm/include/asm/uaccess.h
@@ -195,11 +195,12 @@ extern int __get_user_64t_4(void *);
 #define __get_user_check(x, p)						\
 	({								\
 		unsigned long __limit = current_thread_info()->addr_limit - 1; \
+		unsigned int __ua_flags = uaccess_save_and_enable();	\
 		register typeof(*(p)) __user *__p asm("r0") = (p);	\
 		register __inttype(x) __r2 asm("r2");			\
 		register unsigned long __l asm("r1") = __limit;		\
 		register int __e asm("r0");				\
-		unsigned int __ua_flags = uaccess_save_and_enable();	\
+		unsigned int __err;					\
 		switch (sizeof(*(__p))) {				\
 		case 1:							\
 			if (sizeof((x)) >= 8)				\
@@ -227,9 +228,10 @@ extern int __get_user_64t_4(void *);
 			break;						\
 		default: __e = __get_user_bad(); break;			\
 		}							\
-		uaccess_restore(__ua_flags);				\
+		__err = __e;						\
 		x = (typeof(*(p))) __r2;				\
-		__e;							\
+		uaccess_restore(__ua_flags);				\
+		__err;							\
 	})

 #define get_user(x, p)							\
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 2517dd8c5a4d..c8dcf2660b24 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -904,7 +904,7 @@ endchoice

 config ARM64_FORCE_52BIT
 	bool "Force 52-bit virtual addresses for userspace"
-	depends on ARM64_VA_BITS_52 && EXPERT
+	depends on ARM64_VA_BITS_52
 	help
 	  For systems with 52-bit userspace VAs enabled, the kernel will attempt
 	  to maintain compatibility with older software by providing 48-bit VAs
@@ -1158,6 +1158,7 @@ config XEN
 config FORCE_MAX_ZONEORDER
 	int
 	default "14" if (ARM64_64K_PAGES && TRANSPARENT_HUGEPAGE)
+	default "13" if (ARCH_THUNDER && !ARM64_64K_PAGES && !RHEL_DIFFERENCES)
 	default "12" if (ARM64_16K_PAGES && TRANSPARENT_HUGEPAGE)
 	default "11"
 	help
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
index 219b7507a10f..45769764425d 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
@@ -380,7 +380,7 @@ mains_charger: dc-charger {
 };

 &cdn_dp {
-	status = "okay";
+	status = "disabled";
 };

 &cpu_b0 {
diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
index 6f612d240392..f2ddf7139a2a 100644
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -3595,6 +3595,7 @@ static int kvmhv_p9_guest_entry(struct kvm_vcpu *vcpu, u64 time_limit,
 	unsigned long host_tidr = mfspr(SPRN_TIDR);
 	unsigned long host_iamr = mfspr(SPRN_IAMR);
 	unsigned long host_amr = mfspr(SPRN_AMR);
+	unsigned long host_fscr = mfspr(SPRN_FSCR);
 	s64 dec;
 	u64 tb;
 	int trap, save_pmu;
@@ -3735,6 +3736,9 @@ static int kvmhv_p9_guest_entry(struct kvm_vcpu *vcpu, u64 time_limit,
 	if (host_amr != vcpu->arch.amr)
 		mtspr(SPRN_AMR, host_amr);

+	if (host_fscr != vcpu->arch.fscr)
+		mtspr(SPRN_FSCR, host_fscr);
+
 	msr_check_and_set(MSR_FP | MSR_VEC | MSR_VSX);
 	store_fp_state(&vcpu->arch.fp);
 #ifdef CONFIG_ALTIVEC
diff --git a/arch/s390/include/asm/ipl.h b/arch/s390/include/asm/ipl.h
index a9e2c7295b35..6ff11f3a2d47 100644
--- a/arch/s390/include/asm/ipl.h
+++ b/arch/s390/include/asm/ipl.h
@@ -127,6 +127,7 @@ int ipl_report_add_component(struct ipl_report *report, struct kexec_buf *kbuf,
 			     unsigned char flags, unsigned short cert);
 int ipl_report_add_certificate(struct ipl_report *report, void *key,
 			       unsigned long addr, unsigned long len);
+bool ipl_get_secureboot(void);

 /*
  * DIAG 308 support
diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c
index 7a21eca498aa..565f143c9858 100644
--- a/arch/s390/kernel/ipl.c
+++ b/arch/s390/kernel/ipl.c
@@ -2215,3 +2215,8 @@ int ipl_report_free(struct ipl_report *report)
 }

 #endif
+
+bool ipl_get_secureboot(void)
+{
+	return !!ipl_secure_flag;
+}
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index 1fbed91c73bc..73f5724342b1 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -49,6 +49,7 @@
 #include <linux/memory.h>
 #include <linux/compat.h>
 #include <linux/start_kernel.h>
+#include <linux/security.h>
 #include <linux/hugetlb.h>

 #include <asm/boot_data.h>
@@ -1100,6 +1101,9 @@ void __init setup_arch(char **cmdline_p)

 	log_component_list();

+	if (ipl_get_secureboot())
+		security_lock_kernel_down("Secure IPL mode", LOCKDOWN_INTEGRITY_MAX);
+
 	/* Have one command line that is parsed and saved in /proc/cmdline */
 	/* boot_command_line has been already set up in early.c */
 	*cmdline_p = boot_command_line;
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index df964571a6b4..200db376f728 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -19,6 +19,7 @@
 #include <linux/sfi.h>
 #include <linux/hugetlb.h>
 #include <linux/tboot.h>
+#include <linux/security.h>
 #include <linux/usb/xhci-dbgp.h>
 #include <linux/static_call.h>
 #include <linux/swiotlb.h>
@@ -955,6 +956,13 @@ void __init setup_arch(char **cmdline_p)
 	if (efi_enabled(EFI_BOOT))
 		efi_init();

+	efi_set_secure_boot(boot_params.secure_boot);
+
+#ifdef CONFIG_LOCK_DOWN_IN_EFI_SECURE_BOOT
+	if (efi_enabled(EFI_SECURE_BOOT))
+		security_lock_kernel_down("EFI Secure Boot mode", LOCKDOWN_INTEGRITY_MAX);
+#endif
+
 	dmi_setup();

 	/*
@@ -1116,19 +1124,7 @@ void __init setup_arch(char **cmdline_p)
 	/* Allocate bigger log buffer */
 	setup_log_buf(1);

-	if (efi_enabled(EFI_BOOT)) {
-		switch (boot_params.secure_boot) {
-		case efi_secureboot_mode_disabled:
-			pr_info("Secure boot disabled\n");
-			break;
-		case efi_secureboot_mode_enabled:
-			pr_info("Secure boot enabled\n");
-			break;
-		default:
-			pr_info("Secure boot could not be determined\n");
-			break;
-		}
-	}
+	efi_set_secure_boot(boot_params.secure_boot);

 	reserve_initrd();

diff --git a/arch/x86/kvm/hyperv.c b/arch/x86/kvm/hyperv.c
index 922c69dcca4d..cee2cb0f6e5f 100644
--- a/arch/x86/kvm/hyperv.c
+++ b/arch/x86/kvm/hyperv.c
@@ -155,7 +155,7 @@ static struct kvm_vcpu_hv_synic *synic_get(struct kvm *kvm, u32 vpidx)
 	struct kvm_vcpu_hv_synic *synic;

 	vcpu = get_vcpu_by_vpidx(kvm, vpidx);
-	if (!vcpu)
+	if (!vcpu || !vcpu_to_hv_vcpu(vcpu))
 		return NULL;
 	synic = vcpu_to_synic(vcpu);
 	return (synic->active) ? synic : NULL;
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index ebcf534514be..7265173689ce 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -326,6 +326,9 @@ config ACPI_THERMAL
 	  To compile this driver as a module, choose M here:
 	  the module will be called thermal.

+config ACPI_PLATFORM_PROFILE
+	tristate
+
 config ACPI_CUSTOM_DSDT_FILE
 	string "Custom DSDT Table file to include"
 	default ""
diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
index 076894a3330f..52b627c7f977 100644
--- a/drivers/acpi/Makefile
+++ b/drivers/acpi/Makefile
@@ -79,6 +79,7 @@ obj-$(CONFIG_ACPI_PCI_SLOT)	+= pci_slot.o
 obj-$(CONFIG_ACPI_PROCESSOR)	+= processor.o
 obj-$(CONFIG_ACPI)		+= container.o
 obj-$(CONFIG_ACPI_THERMAL)	+= thermal.o
+obj-$(CONFIG_ACPI_PLATFORM_PROFILE) 	+= platform_profile.o
 obj-$(CONFIG_ACPI_NFIT)		+= nfit/
 obj-$(CONFIG_ACPI_NUMA)		+= numa/
 obj-$(CONFIG_ACPI)		+= acpi_memhotplug.o
diff --git a/drivers/acpi/apei/hest.c b/drivers/acpi/apei/hest.c
index 6e980fe16772..37bc003e7a83 100644
--- a/drivers/acpi/apei/hest.c
+++ b/drivers/acpi/apei/hest.c
@@ -88,6 +88,14 @@ int apei_hest_parse(apei_hest_func_t func, void *data)
 	if (hest_disable || !hest_tab)
 		return -EINVAL;

+#ifdef CONFIG_ARM64
+	/* Ignore broken firmware */
+	if (!strncmp(hest_tab->header.oem_id, "HPE   ", 6) &&
+	    !strncmp(hest_tab->header.oem_table_id, "ProLiant", 8) &&
+	    MIDR_IMPLEMENTOR(read_cpuid_id()) == ARM_CPU_IMP_APM)
+		return -EINVAL;
+#endif
+
 	hest_hdr = (struct acpi_hest_header *)(hest_tab + 1);
 	for (i = 0; i < hest_tab->error_source_count; i++) {
 		len = hest_esrc_len(hest_hdr);
diff --git a/drivers/acpi/irq.c b/drivers/acpi/irq.c
index e209081d644b..7484bcf59a1b 100644
--- a/drivers/acpi/irq.c
+++ b/drivers/acpi/irq.c
@@ -126,6 +126,7 @@ struct acpi_irq_parse_one_ctx {
 	unsigned int index;
 	unsigned long *res_flags;
 	struct irq_fwspec *fwspec;
+	bool skip_producer_check;
 };

 /**
@@ -197,7 +198,8 @@ static acpi_status acpi_irq_parse_one_cb(struct acpi_resource *ares,
 		return AE_CTRL_TERMINATE;
 	case ACPI_RESOURCE_TYPE_EXTENDED_IRQ:
 		eirq = &ares->data.extended_irq;
-		if (eirq->producer_consumer == ACPI_PRODUCER)
+		if (!ctx->skip_producer_check &&
+		    eirq->producer_consumer == ACPI_PRODUCER)
 			return AE_OK;
 		if (ctx->index >= eirq->interrupt_count) {
 			ctx->index -= eirq->interrupt_count;
@@ -232,8 +234,19 @@ static acpi_status acpi_irq_parse_one_cb(struct acpi_resource *ares,
 static int acpi_irq_parse_one(acpi_handle handle, unsigned int index,
 			      struct irq_fwspec *fwspec, unsigned long *flags)
 {
-	struct acpi_irq_parse_one_ctx ctx = { -EINVAL, index, flags, fwspec };
+	struct acpi_irq_parse_one_ctx ctx = { -EINVAL, index, flags, fwspec, false };

+	/*
+	 * Firmware on arm64-based HPE m400 platform incorrectly marks
+	 * its UART interrupt as ACPI_PRODUCER rather than ACPI_CONSUMER.
+	 * Don't do the producer/consumer check for that device.
+	 */
+	if (IS_ENABLED(CONFIG_ARM64)) {
+		struct acpi_device *adev = acpi_bus_get_acpi_device(handle);
+
+		if (adev && !strcmp(acpi_device_hid(adev), "APMC0D08"))
+			ctx.skip_producer_check = true;
+	}
 	acpi_walk_resources(handle, METHOD_NAME__CRS, acpi_irq_parse_one_cb, &ctx);
 	return ctx.rc;
 }
diff --git a/drivers/acpi/pci_mcfg.c b/drivers/acpi/pci_mcfg.c
index 95f23acd5b80..53cab975f612 100644
--- a/drivers/acpi/pci_mcfg.c
+++ b/drivers/acpi/pci_mcfg.c
@@ -116,6 +116,13 @@ static struct mcfg_fixup mcfg_quirks[] = {
 	THUNDER_ECAM_QUIRK(2, 12),
 	THUNDER_ECAM_QUIRK(2, 13),

+	{ "NVIDIA", "TEGRA194", 1, 0, MCFG_BUS_ANY, &tegra194_pcie_ops},
+	{ "NVIDIA", "TEGRA194", 1, 1, MCFG_BUS_ANY, &tegra194_pcie_ops},
+	{ "NVIDIA", "TEGRA194", 1, 2, MCFG_BUS_ANY, &tegra194_pcie_ops},
+	{ "NVIDIA", "TEGRA194", 1, 3, MCFG_BUS_ANY, &tegra194_pcie_ops},
+	{ "NVIDIA", "TEGRA194", 1, 4, MCFG_BUS_ANY, &tegra194_pcie_ops},
+	{ "NVIDIA", "TEGRA194", 1, 5, MCFG_BUS_ANY, &tegra194_pcie_ops},
+
 #define XGENE_V1_ECAM_MCFG(rev, seg) \
 	{"APM   ", "XGENE   ", rev, seg, MCFG_BUS_ANY, \
 		&xgene_v1_pcie_ecam_ops }
diff --git a/drivers/acpi/platform_profile.c b/drivers/acpi/platform_profile.c
new file mode 100644
index 000000000000..4a59c5993bde
--- /dev/null
+++ b/drivers/acpi/platform_profile.c
@@ -0,0 +1,177 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+/* Platform profile sysfs interface */
+
+#include <linux/acpi.h>
+#include <linux/bits.h>
+#include <linux/init.h>
+#include <linux/mutex.h>
+#include <linux/platform_profile.h>
+#include <linux/sysfs.h>
+
+static struct platform_profile_handler *cur_profile;
+static DEFINE_MUTEX(profile_lock);
+
+static const char * const profile_names[] = {
+	[PLATFORM_PROFILE_LOW_POWER] = "low-power",
+	[PLATFORM_PROFILE_COOL] = "cool",
+	[PLATFORM_PROFILE_QUIET] = "quiet",
+	[PLATFORM_PROFILE_BALANCED] = "balanced",
+	[PLATFORM_PROFILE_PERFORMANCE] = "performance",
+};
+static_assert(ARRAY_SIZE(profile_names) == PLATFORM_PROFILE_LAST);
+
+static ssize_t platform_profile_choices_show(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	int len = 0;
+	int err, i;
+
+	err = mutex_lock_interruptible(&profile_lock);
+	if (err)
+		return err;
+
+	if (!cur_profile) {
+		mutex_unlock(&profile_lock);
+		return -ENODEV;
+	}
+
+	for_each_set_bit(i, cur_profile->choices, PLATFORM_PROFILE_LAST) {
+		if (len == 0)
+			len += sysfs_emit_at(buf, len, "%s", profile_names[i]);
+		else
+			len += sysfs_emit_at(buf, len, " %s", profile_names[i]);
+	}
+	len += sysfs_emit_at(buf, len, "\n");
+	mutex_unlock(&profile_lock);
+	return len;
+}
+
+static ssize_t platform_profile_show(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	enum platform_profile_option profile = PLATFORM_PROFILE_BALANCED;
+	int err;
+
+	err = mutex_lock_interruptible(&profile_lock);
+	if (err)
+		return err;
+
+	if (!cur_profile) {
+		mutex_unlock(&profile_lock);
+		return -ENODEV;
+	}
+
+	err = cur_profile->profile_get(cur_profile, &profile);
+	mutex_unlock(&profile_lock);
+	if (err)
+		return err;
+
+	/* Check that profile is valid index */
+	if (WARN_ON((profile < 0) || (profile >= ARRAY_SIZE(profile_names))))
+		return -EIO;
+
+	return sysfs_emit(buf, "%s\n", profile_names[profile]);
+}
+
+static ssize_t platform_profile_store(struct device *dev,
+			    struct device_attribute *attr,
+			    const char *buf, size_t count)
+{
+	int err, i;
+
+	err = mutex_lock_interruptible(&profile_lock);
+	if (err)
+		return err;
+
+	if (!cur_profile) {
+		mutex_unlock(&profile_lock);
+		return -ENODEV;
+	}
+
+	/* Scan for a matching profile */
+	i = sysfs_match_string(profile_names, buf);
+	if (i < 0) {
+		mutex_unlock(&profile_lock);
+		return -EINVAL;
+	}
+
+	/* Check that platform supports this profile choice */
+	if (!test_bit(i, cur_profile->choices)) {
+		mutex_unlock(&profile_lock);
+		return -EOPNOTSUPP;
+	}
+
+	err = cur_profile->profile_set(cur_profile, i);
+	mutex_unlock(&profile_lock);
+	if (err)
+		return err;
+	return count;
+}
+
+static DEVICE_ATTR_RO(platform_profile_choices);
+static DEVICE_ATTR_RW(platform_profile);
+
+static struct attribute *platform_profile_attrs[] = {
+	&dev_attr_platform_profile_choices.attr,
+	&dev_attr_platform_profile.attr,
+	NULL
+};
+
+static const struct attribute_group platform_profile_group = {
+	.attrs = platform_profile_attrs
+};
+
+void platform_profile_notify(void)
+{
+	if (!cur_profile)
+		return;
+	sysfs_notify(acpi_kobj, NULL, "platform_profile");
+}
+EXPORT_SYMBOL_GPL(platform_profile_notify);
+
+int platform_profile_register(struct platform_profile_handler *pprof)
+{
+	int err;
+
+	mutex_lock(&profile_lock);
+	/* We can only have one active profile */
+	if (cur_profile) {
+		mutex_unlock(&profile_lock);
+		return -EEXIST;
+	}
+
+	/* Sanity check the profile handler field are set */
+	if (!pprof || bitmap_empty(pprof->choices, PLATFORM_PROFILE_LAST) ||
+		!pprof->profile_set || !pprof->profile_get) {
+		mutex_unlock(&profile_lock);
+		return -EINVAL;
+	}
+
+	err = sysfs_create_group(acpi_kobj, &platform_profile_group);
+	if (err) {
+		mutex_unlock(&profile_lock);
+		return err;
+	}
+
+	cur_profile = pprof;
+	mutex_unlock(&profile_lock);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(platform_profile_register);
+
+int platform_profile_remove(void)
+{
+	sysfs_remove_group(acpi_kobj, &platform_profile_group);
+
+	mutex_lock(&profile_lock);
+	cur_profile = NULL;
+	mutex_unlock(&profile_lock);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(platform_profile_remove);
+
+MODULE_AUTHOR("Mark Pearson <markpearson@lenovo.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index 239eeeafc62f..bb8c046fc4cb 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -1638,6 +1638,15 @@ static bool acpi_device_enumeration_by_parent(struct acpi_device *device)
 	if (!acpi_match_device_ids(device, i2c_multi_instantiate_ids))
 		return false;

+	/*
+	 * Firmware on some arm64 X-Gene platforms will make the UART
+	 * device appear as both a UART and a slave of that UART. Just
+	 * bail out here for X-Gene UARTs.
+	 */
+	if (IS_ENABLED(CONFIG_ARM64) &&
+	    !strcmp(acpi_device_hid(device), "APMC0D08"))
+		return false;
+
 	INIT_LIST_HEAD(&resource_list);
 	acpi_dev_get_resources(device, &resource_list,
 			       acpi_check_serial_bus_slave,
diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
index ea5bf5f4cbed..71c55cae27ac 100644
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -666,6 +666,24 @@ int ahci_stop_engine(struct ata_port *ap)
 	tmp &= ~PORT_CMD_START;
 	writel(tmp, port_mmio + PORT_CMD);

+#ifdef CONFIG_ARM64
+	/* Rev Ax of Cavium CN99XX needs a hack for port stop */
+	if (dev_is_pci(ap->host->dev) &&
+	    to_pci_dev(ap->host->dev)->vendor == 0x14e4 &&
+	    to_pci_dev(ap->host->dev)->device == 0x9027 &&
+	    midr_is_cpu_model_range(read_cpuid_id(),
+			MIDR_CPU_MODEL(ARM_CPU_IMP_BRCM, BRCM_CPU_PART_VULCAN),
+			MIDR_CPU_VAR_REV(0, 0),
+			MIDR_CPU_VAR_REV(0, MIDR_REVISION_MASK))) {
+		tmp = readl(hpriv->mmio + 0x8000);
+		udelay(100);
+		writel(tmp | (1 << 26), hpriv->mmio + 0x8000);
+		udelay(100);
+		writel(tmp & ~(1 << 26), hpriv->mmio + 0x8000);
+		dev_warn(ap->host->dev, "CN99XX SATA reset workaround applied\n");
+	}
+#endif
+
 	/* wait for engine to stop. This could be as long as 500 msec */
 	tmp = ata_wait_register(ap, port_mmio + PORT_CMD,
 				PORT_CMD_LIST_ON, PORT_CMD_LIST_ON, 1, 500);
diff --git a/drivers/char/ipmi/ipmi_dmi.c b/drivers/char/ipmi/ipmi_dmi.c
index bbf7029e224b..cf7faa970dd6 100644
--- a/drivers/char/ipmi/ipmi_dmi.c
+++ b/drivers/char/ipmi/ipmi_dmi.c
@@ -215,6 +215,21 @@ static int __init scan_for_dmi_ipmi(void)
 {
 	const struct dmi_device *dev = NULL;

+#ifdef CONFIG_ARM64
+	/* RHEL-only
+	 * If this is ARM-based HPE m400, return now, because that platform
+	 * reports the host-side ipmi address as intel port-io space, which
+	 * does not exist in the ARM architecture.
+	 */
+	const char *dmistr = dmi_get_system_info(DMI_PRODUCT_NAME);
+
+	if (dmistr && (strcmp("ProLiant m400 Server", dmistr) == 0)) {
+		pr_debug("%s does not support host ipmi\n", dmistr);
+		return 0;
+	}
+	/* END RHEL-only */
+#endif
+
 	while ((dev = dmi_find_device(DMI_DEV_TYPE_IPMI, NULL, dev)))
 		dmi_decode_ipmi((const struct dmi_header *) dev->device_data);

diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c
index c44ad18464f1..3ec1db4cbbc3 100644
--- a/drivers/char/ipmi/ipmi_msghandler.c
+++ b/drivers/char/ipmi/ipmi_msghandler.c
@@ -34,6 +34,7 @@
 #include <linux/uuid.h>
 #include <linux/nospec.h>
 #include <linux/vmalloc.h>
+#include <linux/dmi.h>
 #include <linux/delay.h>

 #define IPMI_DRIVER_VERSION "39.2"
@@ -5174,8 +5175,21 @@ static int __init ipmi_init_msghandler_mod(void)
 {
 	int rv;

-	pr_info("version " IPMI_DRIVER_VERSION "\n");
+#ifdef CONFIG_ARM64
+	/* RHEL-only
+	 * If this is ARM-based HPE m400, return now, because that platform
+	 * reports the host-side ipmi address as intel port-io space, which
+	 * does not exist in the ARM architecture.
+	 */
+	const char *dmistr = dmi_get_system_info(DMI_PRODUCT_NAME);

+	if (dmistr && (strcmp("ProLiant m400 Server", dmistr) == 0)) {
+		pr_debug("%s does not support host ipmi\n", dmistr);
+		return -ENOSYS;
+	}
+	/* END RHEL-only */
+#endif
+	pr_info("version " IPMI_DRIVER_VERSION "\n");
 	mutex_lock(&ipmi_interfaces_mutex);
 	rv = ipmi_register_driver();
 	mutex_unlock(&ipmi_interfaces_mutex);
diff --git a/drivers/firmware/efi/Makefile b/drivers/firmware/efi/Makefile
index 467e94259679..9b6f5b8e5397 100644
--- a/drivers/firmware/efi/Makefile
+++ b/drivers/firmware/efi/Makefile
@@ -28,6 +28,7 @@ obj-$(CONFIG_EFI_FAKE_MEMMAP)		+= fake_map.o
 obj-$(CONFIG_EFI_BOOTLOADER_CONTROL)	+= efibc.o
 obj-$(CONFIG_EFI_TEST)			+= test/
 obj-$(CONFIG_EFI_DEV_PATH_PARSER)	+= dev-path-parser.o
+obj-$(CONFIG_EFI)			+= secureboot.o
 obj-$(CONFIG_APPLE_PROPERTIES)		+= apple-properties.o
 obj-$(CONFIG_EFI_RCI2_TABLE)		+= rci2-table.o
 obj-$(CONFIG_EFI_EMBEDDED_FIRMWARE)	+= embedded-firmware.o
diff --git a/drivers/firmware/efi/efi.c b/drivers/firmware/efi/efi.c
index 4b7ee3fa9224..64b31d852d20 100644
--- a/drivers/firmware/efi/efi.c
+++ b/drivers/firmware/efi/efi.c
@@ -31,6 +31,7 @@
 #include <linux/ucs2_string.h>
 #include <linux/memblock.h>
 #include <linux/security.h>
+#include <linux/bsearch.h>

 #include <asm/early_ioremap.h>

@@ -841,40 +842,101 @@ int efi_mem_type(unsigned long phys_addr)
 }
 #endif

+struct efi_error_code {
+	efi_status_t status;
+	int errno;
+	const char *description;
+};
+
+static const struct efi_error_code efi_error_codes[] = {
+	{ EFI_SUCCESS, 0, "Success"},
+#if 0
+	{ EFI_LOAD_ERROR, -EPICK_AN_ERRNO, "Load Error"},
+#endif
+	{ EFI_INVALID_PARAMETER, -EINVAL, "Invalid Parameter"},
+	{ EFI_UNSUPPORTED, -ENOSYS, "Unsupported"},
+	{ EFI_BAD_BUFFER_SIZE, -ENOSPC, "Bad Buffer Size"},
+	{ EFI_BUFFER_TOO_SMALL, -ENOSPC, "Buffer Too Small"},
+	{ EFI_NOT_READY, -EAGAIN, "Not Ready"},
+	{ EFI_DEVICE_ERROR, -EIO, "Device Error"},
+	{ EFI_WRITE_PROTECTED, -EROFS, "Write Protected"},
+	{ EFI_OUT_OF_RESOURCES, -ENOMEM, "Out of Resources"},
+#if 0
+	{ EFI_VOLUME_CORRUPTED, -EPICK_AN_ERRNO, "Volume Corrupt"},
+	{ EFI_VOLUME_FULL, -EPICK_AN_ERRNO, "Volume Full"},
+	{ EFI_NO_MEDIA, -EPICK_AN_ERRNO, "No Media"},
+	{ EFI_MEDIA_CHANGED, -EPICK_AN_ERRNO, "Media changed"},
+#endif
+	{ EFI_NOT_FOUND, -ENOENT, "Not Found"},
+#if 0
+	{ EFI_ACCESS_DENIED, -EPICK_AN_ERRNO, "Access Denied"},
+	{ EFI_NO_RESPONSE, -EPICK_AN_ERRNO, "No Response"},
+	{ EFI_NO_MAPPING, -EPICK_AN_ERRNO, "No mapping"},
+	{ EFI_TIMEOUT, -EPICK_AN_ERRNO, "Time out"},
+	{ EFI_NOT_STARTED, -EPICK_AN_ERRNO, "Not started"},
+	{ EFI_ALREADY_STARTED, -EPICK_AN_ERRNO, "Already started"},
+#endif
+	{ EFI_ABORTED, -EINTR, "Aborted"},
+#if 0
+	{ EFI_ICMP_ERROR, -EPICK_AN_ERRNO, "ICMP Error"},
+	{ EFI_TFTP_ERROR, -EPICK_AN_ERRNO, "TFTP Error"},
+	{ EFI_PROTOCOL_ERROR, -EPICK_AN_ERRNO, "Protocol Error"},
+	{ EFI_INCOMPATIBLE_VERSION, -EPICK_AN_ERRNO, "Incompatible Version"},
+#endif
+	{ EFI_SECURITY_VIOLATION, -EACCES, "Security Policy Violation"},
+#if 0
+	{ EFI_CRC_ERROR, -EPICK_AN_ERRNO, "CRC Error"},
+	{ EFI_END_OF_MEDIA, -EPICK_AN_ERRNO, "End of Media"},
+	{ EFI_END_OF_FILE, -EPICK_AN_ERRNO, "End of File"},
+	{ EFI_INVALID_LANGUAGE, -EPICK_AN_ERRNO, "Invalid Languages"},
+	{ EFI_COMPROMISED_DATA, -EPICK_AN_ERRNO, "Compromised Data"},
+
+	// warnings
+	{ EFI_WARN_UNKOWN_GLYPH, -EPICK_AN_ERRNO, "Warning Unknown Glyph"},
+	{ EFI_WARN_DELETE_FAILURE, -EPICK_AN_ERRNO, "Warning Delete Failure"},
+	{ EFI_WARN_WRITE_FAILURE, -EPICK_AN_ERRNO, "Warning Write Failure"},
+	{ EFI_WARN_BUFFER_TOO_SMALL, -EPICK_AN_ERRNO, "Warning Buffer Too Small"},
+#endif
+};
+
+static int
+efi_status_cmp_bsearch(const void *key, const void *item)
+{
+	u64 status = (u64)(uintptr_t)key;
+	struct efi_error_code *code = (struct efi_error_code *)item;
+
+	if (status < code->status)
+		return -1;
+	if (status > code->status)
+		return 1;
+	return 0;
+}
+
 int efi_status_to_err(efi_status_t status)
 {
-	int err;
-
-	switch (status) {
-	case EFI_SUCCESS:
-		err = 0;
-		break;
-	case EFI_INVALID_PARAMETER:
-		err = -EINVAL;
-		break;
-	case EFI_OUT_OF_RESOURCES:
-		err = -ENOSPC;
-		break;
-	case EFI_DEVICE_ERROR:
-		err = -EIO;
-		break;
-	case EFI_WRITE_PROTECTED:
-		err = -EROFS;
-		break;
-	case EFI_SECURITY_VIOLATION:
-		err = -EACCES;
-		break;
-	case EFI_NOT_FOUND:
-		err = -ENOENT;
-		break;
-	case EFI_ABORTED:
-		err = -EINTR;
-		break;
-	default:
-		err = -EINVAL;
-	}
+	struct efi_error_code *found;
+	size_t num = sizeof(efi_error_codes) / sizeof(struct efi_error_code);

-	return err;
+	found = bsearch((void *)(uintptr_t)status, efi_error_codes,
+			sizeof(struct efi_error_code), num,
+			efi_status_cmp_bsearch);
+	if (!found)
+		return -EINVAL;
+	return found->errno;
+}
+
+const char *
+efi_status_to_str(efi_status_t status)
+{
+	struct efi_error_code *found;
+	size_t num = sizeof(efi_error_codes) / sizeof(struct efi_error_code);
+
+	found = bsearch((void *)(uintptr_t)status, efi_error_codes,
+			sizeof(struct efi_error_code), num,
+			efi_status_cmp_bsearch);
+	if (!found)
+		return "Unknown error code";
+	return found->description;
 }

 static DEFINE_SPINLOCK(efi_mem_reserve_persistent_lock);
diff --git a/drivers/firmware/efi/secureboot.c b/drivers/firmware/efi/secureboot.c
new file mode 100644
index 000000000000..de0a3714a5d4
--- /dev/null
+++ b/drivers/firmware/efi/secureboot.c
@@ -0,0 +1,38 @@
+/* Core kernel secure boot support.
+ *
+ * Copyright (C) 2017 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/efi.h>
+#include <linux/kernel.h>
+#include <linux/printk.h>
+
+/*
+ * Decide what to do when UEFI secure boot mode is enabled.
+ */
+void __init efi_set_secure_boot(enum efi_secureboot_mode mode)
+{
+	if (efi_enabled(EFI_BOOT)) {
+		switch (mode) {
+		case efi_secureboot_mode_disabled:
+			pr_info("Secure boot disabled\n");
+			break;
+		case efi_secureboot_mode_enabled:
+			set_bit(EFI_SECURE_BOOT, &efi.flags);
+			pr_info("Secure boot enabled\n");
+			break;
+		default:
+			pr_warn("Secure boot could not be determined (mode %u)\n",
+				   mode);
+			break;
+		}
+	}
+}
diff --git a/drivers/gpu/drm/i915/display/intel_bw.c b/drivers/gpu/drm/i915/display/intel_bw.c
index bd060404d249..4b5a30ac84bc 100644
--- a/drivers/gpu/drm/i915/display/intel_bw.c
+++ b/drivers/gpu/drm/i915/display/intel_bw.c
@@ -20,76 +20,9 @@ struct intel_qgv_point {
 struct intel_qgv_info {
 	struct intel_qgv_point points[I915_NUM_QGV_POINTS];
 	u8 num_points;
-	u8 num_channels;
 	u8 t_bl;
-	enum intel_dram_type dram_type;
 };

-static int icl_pcode_read_mem_global_info(struct drm_i915_private *dev_priv,
-					  struct intel_qgv_info *qi)
-{
-	u32 val = 0;
-	int ret;
-
-	ret = sandybridge_pcode_read(dev_priv,
-				     ICL_PCODE_MEM_SUBSYSYSTEM_INFO |
-				     ICL_PCODE_MEM_SS_READ_GLOBAL_INFO,
-				     &val, NULL);
-	if (ret)
-		return ret;
-
-	if (IS_GEN(dev_priv, 12)) {
-		switch (val & 0xf) {
-		case 0:
-			qi->dram_type = INTEL_DRAM_DDR4;
-			break;
-		case 3:
-			qi->dram_type = INTEL_DRAM_LPDDR4;
-			break;
-		case 4:
-			qi->dram_type = INTEL_DRAM_DDR3;
-			break;
-		case 5:
-			qi->dram_type = INTEL_DRAM_LPDDR3;
-			break;
-		default:
-			MISSING_CASE(val & 0xf);
-			break;
-		}
-	} else if (IS_GEN(dev_priv, 11)) {
-		switch (val & 0xf) {
-		case 0:
-			qi->dram_type = INTEL_DRAM_DDR4;
-			break;
-		case 1:
-			qi->dram_type = INTEL_DRAM_DDR3;
-			break;
-		case 2:
-			qi->dram_type = INTEL_DRAM_LPDDR3;
-			break;
-		case 3:
-			qi->dram_type = INTEL_DRAM_LPDDR4;
-			break;
-		default:
-			MISSING_CASE(val & 0xf);
-			break;
-		}
-	} else {
-		MISSING_CASE(INTEL_GEN(dev_priv));
-		qi->dram_type = INTEL_DRAM_LPDDR3; /* Conservative default */
-	}
-
-	qi->num_channels = (val & 0xf0) >> 4;
-	qi->num_points = (val & 0xf00) >> 8;
-
-	if (IS_GEN(dev_priv, 12))
-		qi->t_bl = qi->dram_type == INTEL_DRAM_DDR4 ? 4 : 16;
-	else if (IS_GEN(dev_priv, 11))
-		qi->t_bl = qi->dram_type == INTEL_DRAM_DDR4 ? 4 : 8;
-
-	return 0;
-}
-
 static int icl_pcode_read_qgv_point_info(struct drm_i915_private *dev_priv,
 					 struct intel_qgv_point *sp,
 					 int point)
@@ -139,11 +72,15 @@ int icl_pcode_restrict_qgv_points(struct drm_i915_private *dev_priv,
 static int icl_get_qgv_points(struct drm_i915_private *dev_priv,
 			      struct intel_qgv_info *qi)
 {
+	const struct dram_info *dram_info = &dev_priv->dram_info;
 	int i, ret;

-	ret = icl_pcode_read_mem_global_info(dev_priv, qi);
-	if (ret)
-		return ret;
+	qi->num_points = dram_info->num_qgv_points;
+
+	if (IS_GEN(dev_priv, 12))
+		qi->t_bl = dev_priv->dram_info.type == INTEL_DRAM_DDR4 ? 4 : 16;
+	else if (IS_GEN(dev_priv, 11))
+		qi->t_bl = dev_priv->dram_info.type == INTEL_DRAM_DDR4 ? 4 : 8;

 	if (drm_WARN_ON(&dev_priv->drm,
 			qi->num_points > ARRAY_SIZE(qi->points)))
@@ -209,7 +146,7 @@ static int icl_get_bw_info(struct drm_i915_private *dev_priv, const struct intel
 {
 	struct intel_qgv_info qi = {};
 	bool is_y_tile = true; /* assume y tile may be used */
-	int num_channels;
+	int num_channels = dev_priv->dram_info.num_channels;
 	int deinterleave;
 	int ipqdepth, ipqdepthpch;
 	int dclk_max;
@@ -222,7 +159,6 @@ static int icl_get_bw_info(struct drm_i915_private *dev_priv, const struct intel
 			    "Failed to get memory subsystem information, ignoring bandwidth limits");
 		return ret;
 	}
-	num_channels = qi.num_channels;

 	deinterleave = DIV_ROUND_UP(num_channels, is_y_tile ? 4 : 2);
 	dclk_max = icl_sagv_max_dclk(&qi);
diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index 8a26307c4896..bc2aae63fe40 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -1400,6 +1400,7 @@ static u32 g4x_get_aux_send_ctl(struct intel_dp *intel_dp,
 	else
 		precharge = 5;

+	/* Max timeout value on G4x-BDW: 1.6ms */
 	if (IS_BROADWELL(dev_priv))
 		timeout = DP_AUX_CH_CTL_TIME_OUT_600us;
 	else
@@ -1426,6 +1427,12 @@ static u32 skl_get_aux_send_ctl(struct intel_dp *intel_dp,
 	enum phy phy = intel_port_to_phy(i915, dig_port->base.port);
 	u32 ret;

+	/*
+	 * Max timeout values:
+	 * SKL-GLK: 1.6ms
+	 * CNL: 3.2ms
+	 * ICL+: 4ms
+	 */
 	ret = DP_AUX_CH_CTL_SEND_BUSY |
 	      DP_AUX_CH_CTL_DONE |
 	      DP_AUX_CH_CTL_INTERRUPT |
@@ -4871,9 +4878,7 @@ intel_dp_get_dpcd(struct intel_dp *intel_dp)
 {
 	int ret;

-	intel_dp_lttpr_init(intel_dp);
-
-	if (drm_dp_read_dpcd_caps(&intel_dp->aux, intel_dp->dpcd))
+	if (intel_dp_init_lttpr_and_dprx_caps(intel_dp) < 0)
 		return false;

 	/*
diff --git a/drivers/gpu/drm/i915/display/intel_dp_link_training.c b/drivers/gpu/drm/i915/display/intel_dp_link_training.c
index d8c6d7054d11..e6532ea5757b 100644
--- a/drivers/gpu/drm/i915/display/intel_dp_link_training.c
+++ b/drivers/gpu/drm/i915/display/intel_dp_link_training.c
@@ -34,16 +34,9 @@ intel_dp_dump_link_status(const u8 link_status[DP_LINK_STATUS_SIZE])
 		      link_status[3], link_status[4], link_status[5]);
 }

-static int intel_dp_lttpr_count(struct intel_dp *intel_dp)
+static void intel_dp_reset_lttpr_common_caps(struct intel_dp *intel_dp)
 {
-	int count = drm_dp_lttpr_count(intel_dp->lttpr_common_caps);
-
-	/*
-	 * Pretend no LTTPRs in case of LTTPR detection error, or
-	 * if too many (>8) LTTPRs are detected. This translates to link
-	 * training in transparent mode.
-	 */
-	return count <= 0 ? 0 : count;
+	memset(&intel_dp->lttpr_common_caps, 0, sizeof(intel_dp->lttpr_common_caps));
 }

 static void intel_dp_reset_lttpr_count(struct intel_dp *intel_dp)
@@ -93,10 +86,21 @@ static void intel_dp_read_lttpr_phy_caps(struct intel_dp *intel_dp,

 static bool intel_dp_read_lttpr_common_caps(struct intel_dp *intel_dp)
 {
+	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
+
+	if (intel_dp_is_edp(intel_dp))
+		return false;
+
+	/*
+	 * Detecting LTTPRs must be avoided on platforms with an AUX timeout
+	 * period < 3.2ms. (see DP Standard v2.0, 2.11.2, 3.6.6.1).
+	 */
+	if (INTEL_GEN(i915) < 10)
+		return false;
+
 	if (drm_dp_read_lttpr_common_caps(&intel_dp->aux,
 					  intel_dp->lttpr_common_caps) < 0) {
-		memset(intel_dp->lttpr_common_caps, 0,
-		       sizeof(intel_dp->lttpr_common_caps));
+		intel_dp_reset_lttpr_common_caps(intel_dp);
 		return false;
 	}

@@ -118,30 +122,57 @@ intel_dp_set_lttpr_transparent_mode(struct intel_dp *intel_dp, bool enable)
 }

 /**
- * intel_dp_lttpr_init - detect LTTPRs and init the LTTPR link training mode
+ * intel_dp_init_lttpr_and_dprx_caps - detect LTTPR and DPRX caps, init the LTTPR link training mode
  * @intel_dp: Intel DP struct
  *
- * Read the LTTPR common capabilities, switch to non-transparent link training
- * mode if any is detected and read the PHY capabilities for all detected
- * LTTPRs. In case of an LTTPR detection error or if the number of
+ * Read the LTTPR common and DPRX capabilities and switch to non-transparent
+ * link training mode if any is detected and read the PHY capabilities for all
+ * detected LTTPRs. In case of an LTTPR detection error or if the number of
  * LTTPRs is more than is supported (8), fall back to the no-LTTPR,
  * transparent mode link training mode.
  *
  * Returns:
- *   >0  if LTTPRs were detected and the non-transparent LT mode was set
+ *   >0  if LTTPRs were detected and the non-transparent LT mode was set. The
+ *       DPRX capabilities are read out.
  *    0  if no LTTPRs or more than 8 LTTPRs were detected or in case of a
- *       detection failure and the transparent LT mode was set
+ *       detection failure and the transparent LT mode was set. The DPRX
+ *       capabilities are read out.
+ *   <0  Reading out the DPRX capabilities failed.
  */
-int intel_dp_lttpr_init(struct intel_dp *intel_dp)
+int intel_dp_init_lttpr_and_dprx_caps(struct intel_dp *intel_dp)
 {
 	int lttpr_count;
 	bool ret;
 	int i;

-	if (intel_dp_is_edp(intel_dp))
+	ret = intel_dp_read_lttpr_common_caps(intel_dp);
+
+	/* The DPTX shall read the DPRX caps after LTTPR detection. */
+	if (drm_dp_read_dpcd_caps(&intel_dp->aux, intel_dp->dpcd)) {
+		intel_dp_reset_lttpr_common_caps(intel_dp);
+		return -EIO;
+	}
+
+	if (!ret)
 		return 0;

-	ret = intel_dp_read_lttpr_common_caps(intel_dp);
+	/*
+	 * The 0xF0000-0xF02FF range is only valid if the DPCD revision is
+	 * at least 1.4.
+	 */
+	if (intel_dp->dpcd[DP_DPCD_REV] < 0x14) {
+		intel_dp_reset_lttpr_common_caps(intel_dp);
+		return 0;
+	}
+
+	lttpr_count = drm_dp_lttpr_count(intel_dp->lttpr_common_caps);
+	/*
+	 * Prevent setting LTTPR transparent mode explicitly if no LTTPRs are
+	 * detected as this breaks link training at least on the Dell WD19TB
+	 * dock.
+	 */
+	if (lttpr_count == 0)
+		return 0;

 	/*
 	 * See DP Standard v2.0 3.6.6.1. about the explicit disabling of
@@ -150,17 +181,12 @@ int intel_dp_lttpr_init(struct intel_dp *intel_dp)
 	 */
 	intel_dp_set_lttpr_transparent_mode(intel_dp, true);

-	if (!ret)
-		return 0;
-
-	lttpr_count = intel_dp_lttpr_count(intel_dp);
-
 	/*
 	 * In case of unsupported number of LTTPRs or failing to switch to
 	 * non-transparent mode fall-back to transparent link training mode,
 	 * still taking into account any LTTPR common lane- rate/count limits.
 	 */
-	if (lttpr_count == 0)
+	if (lttpr_count < 0)
 		return 0;

 	if (!intel_dp_set_lttpr_transparent_mode(intel_dp, false)) {
@@ -178,7 +204,7 @@ int intel_dp_lttpr_init(struct intel_dp *intel_dp)

 	return lttpr_count;
 }
-EXPORT_SYMBOL(intel_dp_lttpr_init);
+EXPORT_SYMBOL(intel_dp_init_lttpr_and_dprx_caps);

 static u8 dp_voltage_max(u8 preemph)
 {
@@ -222,11 +248,11 @@ intel_dp_phy_is_downstream_of_source(struct intel_dp *intel_dp,
 				     enum drm_dp_phy dp_phy)
 {
 	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
-	int lttpr_count = intel_dp_lttpr_count(intel_dp);
+	int lttpr_count = drm_dp_lttpr_count(intel_dp->lttpr_common_caps);

-	drm_WARN_ON_ONCE(&i915->drm, lttpr_count == 0 && dp_phy != DP_PHY_DPRX);
+	drm_WARN_ON_ONCE(&i915->drm, lttpr_count <= 0 && dp_phy != DP_PHY_DPRX);

-	return lttpr_count == 0 || dp_phy == DP_PHY_LTTPR(lttpr_count - 1);
+	return lttpr_count <= 0 || dp_phy == DP_PHY_LTTPR(lttpr_count - 1);
 }

 static u8 intel_dp_phy_voltage_max(struct intel_dp *intel_dp,
@@ -814,7 +840,10 @@ void intel_dp_start_link_train(struct intel_dp *intel_dp,
 	 * TODO: Reiniting LTTPRs here won't be needed once proper connector
 	 * HW state readout is added.
 	 */
-	int lttpr_count = intel_dp_lttpr_init(intel_dp);
+	int lttpr_count = intel_dp_init_lttpr_and_dprx_caps(intel_dp);
+
+	if (lttpr_count < 0)
+		return;

 	if (!intel_dp_link_train_all_phys(intel_dp, crtc_state, lttpr_count))
 		intel_dp_schedule_fallback_link_training(intel_dp, crtc_state);
diff --git a/drivers/gpu/drm/i915/display/intel_dp_link_training.h b/drivers/gpu/drm/i915/display/intel_dp_link_training.h
index 6a1f76bd8c75..9cb7c28027f0 100644
--- a/drivers/gpu/drm/i915/display/intel_dp_link_training.h
+++ b/drivers/gpu/drm/i915/display/intel_dp_link_training.h
@@ -11,7 +11,7 @@
 struct intel_crtc_state;
 struct intel_dp;

-int intel_dp_lttpr_init(struct intel_dp *intel_dp);
+int intel_dp_init_lttpr_and_dprx_caps(struct intel_dp *intel_dp);

 void intel_dp_get_adjust_train(struct intel_dp *intel_dp,
 			       const struct intel_crtc_state *crtc_state,
diff --git a/drivers/gpu/drm/i915/display/intel_psr.c b/drivers/gpu/drm/i915/display/intel_psr.c
index b3631b722de3..5089dbd240f4 100644
--- a/drivers/gpu/drm/i915/display/intel_psr.c
+++ b/drivers/gpu/drm/i915/display/intel_psr.c
@@ -653,6 +653,20 @@ tgl_dc3co_exitline_compute_config(struct intel_dp *intel_dp,
 	struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
 	u32 exit_scanlines;

+	/*
+	 * FIXME: Due to the changed sequence of activating/deactivating DC3CO,
+	 * disable DC3CO until the changed dc3co activating/deactivating sequence
+	 * is applied. B.Specs:49196
+	 */
+	return;
+
+	/*
+	 * DMC's DC3CO exit mechanism has an issue with Selective Fecth
+	 * TODO: when the issue is addressed, this restriction should be removed.
+	 */
+	if (crtc_state->enable_psr2_sel_fetch)
+		return;
+
 	if (!(dev_priv->csr.allowed_dc_mask & DC_STATE_EN_DC3CO))
 		return;

diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index 99eb0d7bbc44..85feb5742296 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -609,14 +609,15 @@ static int i915_driver_hw_probe(struct drm_i915_private *dev_priv)
 		goto err_msi;

 	intel_opregion_setup(dev_priv);
+
+	intel_pcode_init(dev_priv);
+
 	/*
 	 * Fill the dram structure to get the system raw bandwidth and
 	 * dram info. This will be used for memory latency calculation.
 	 */
 	intel_dram_detect(dev_priv);

-	intel_pcode_init(dev_priv);
-
 	intel_bw_init_hw(dev_priv);

 	return 0;
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index bd5f76a28d68..a0464f73710a 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -1147,6 +1147,7 @@ struct drm_i915_private {
 			INTEL_DRAM_LPDDR3,
 			INTEL_DRAM_LPDDR4
 		} type;
+		u8 num_qgv_points;
 	} dram_info;

 	struct intel_bw_info {
diff --git a/drivers/gpu/drm/i915/intel_dram.c b/drivers/gpu/drm/i915/intel_dram.c
index 4754296a250e..a68be91a1140 100644
--- a/drivers/gpu/drm/i915/intel_dram.c
+++ b/drivers/gpu/drm/i915/intel_dram.c
@@ -5,6 +5,7 @@

 #include "i915_drv.h"
 #include "intel_dram.h"
+#include "intel_sideband.h"

 struct dram_dimm_info {
 	u16 size;
@@ -434,6 +435,81 @@ static int bxt_get_dram_info(struct drm_i915_private *i915)
 	return 0;
 }

+static int icl_pcode_read_mem_global_info(struct drm_i915_private *dev_priv)
+{
+	struct dram_info *dram_info = &dev_priv->dram_info;
+	u32 val = 0;
+	int ret;
+
+	ret = sandybridge_pcode_read(dev_priv,
+				     ICL_PCODE_MEM_SUBSYSYSTEM_INFO |
+				     ICL_PCODE_MEM_SS_READ_GLOBAL_INFO,
+				     &val, NULL);
+	if (ret)
+		return ret;
+
+	if (IS_GEN(dev_priv, 12)) {
+		switch (val & 0xf) {
+		case 0:
+			dram_info->type = INTEL_DRAM_DDR4;
+			break;
+		case 3:
+			dram_info->type = INTEL_DRAM_LPDDR4;
+			break;
+		case 4:
+			dram_info->type = INTEL_DRAM_DDR3;
+			break;
+		case 5:
+			dram_info->type = INTEL_DRAM_LPDDR3;
+			break;
+		default:
+			MISSING_CASE(val & 0xf);
+			return -1;
+		}
+	} else {
+		switch (val & 0xf) {
+		case 0:
+			dram_info->type = INTEL_DRAM_DDR4;
+			break;
+		case 1:
+			dram_info->type = INTEL_DRAM_DDR3;
+			break;
+		case 2:
+			dram_info->type = INTEL_DRAM_LPDDR3;
+			break;
+		case 3:
+			dram_info->type = INTEL_DRAM_LPDDR4;
+			break;
+		default:
+			MISSING_CASE(val & 0xf);
+			return -1;
+		}
+	}
+
+	dram_info->num_channels = (val & 0xf0) >> 4;
+	dram_info->num_qgv_points = (val & 0xf00) >> 8;
+
+	return 0;
+}
+
+static int gen11_get_dram_info(struct drm_i915_private *i915)
+{
+	int ret = skl_get_dram_info(i915);
+
+	if (ret)
+		return ret;
+
+	return icl_pcode_read_mem_global_info(i915);
+}
+
+static int gen12_get_dram_info(struct drm_i915_private *i915)
+{
+	/* Always needed for GEN12+ */
+	i915->dram_info.is_16gb_dimm = true;
+
+	return icl_pcode_read_mem_global_info(i915);
+}
+
 void intel_dram_detect(struct drm_i915_private *i915)
 {
 	struct dram_info *dram_info = &i915->dram_info;
@@ -449,7 +525,11 @@ void intel_dram_detect(struct drm_i915_private *i915)
 	if (INTEL_GEN(i915) < 9 || !HAS_DISPLAY(i915))
 		return;

-	if (IS_GEN9_LP(i915))
+	if (INTEL_GEN(i915) >= 12)
+		ret = gen12_get_dram_info(i915);
+	else if (INTEL_GEN(i915) >= 11)
+		ret = gen11_get_dram_info(i915);
+	else if (IS_GEN9_LP(i915))
 		ret = bxt_get_dram_info(i915);
 	else
 		ret = skl_get_dram_info(i915);
diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index b4e021ea30f9..5687b745ebe2 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -532,6 +532,15 @@ config DRM_PANEL_VISIONOX_RM69299
 	  Say Y here if you want to enable support for Visionox
 	  RM69299  DSI Video Mode panel.

+config DRM_PANEL_XINGBANGDA_XBD599
+	tristate "Xingbangda XBD599 panel"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y here if you want to enable support for the Xingbangda XBD599
+	  MIPI DSI Video Mode panel.
+
 config DRM_PANEL_XINPENG_XPP055C272
 	tristate "Xinpeng XPP055C272 panel driver"
 	depends on OF
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
index ebbf488c7eac..cc539a167f40 100644
--- a/drivers/gpu/drm/panel/Makefile
+++ b/drivers/gpu/drm/panel/Makefile
@@ -56,4 +56,5 @@ obj-$(CONFIG_DRM_PANEL_TPO_TD043MTEA1) += panel-tpo-td043mtea1.o
 obj-$(CONFIG_DRM_PANEL_TPO_TPG110) += panel-tpo-tpg110.o
 obj-$(CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA) += panel-truly-nt35597.o
 obj-$(CONFIG_DRM_PANEL_VISIONOX_RM69299) += panel-visionox-rm69299.o
+obj-$(CONFIG_DRM_PANEL_XINGBANGDA_XBD599) += panel-xingbangda-xbd599.o
 obj-$(CONFIG_DRM_PANEL_XINPENG_XPP055C272) += panel-xinpeng-xpp055c272.o
diff --git a/drivers/gpu/drm/panel/panel-xingbangda-xbd599.c b/drivers/gpu/drm/panel/panel-xingbangda-xbd599.c
new file mode 100644
index 000000000000..b483f96ee1db
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-xingbangda-xbd599.c
@@ -0,0 +1,366 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Xingbangda XBD599 MIPI-DSI panel driver
+ *
+ * Copyright (C) 2019-2020 Icenowy Zheng <icenowy@aosc.io>
+ *
+ * Based on panel-rocktech-jh057n00900.c, which is:
+ *   Copyright (C) Purism SPC 2019
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regulator/consumer.h>
+
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_panel.h>
+#include <drm/drm_print.h>
+
+/* Manufacturer specific Commands send via DSI */
+#define ST7703_CMD_ALL_PIXEL_OFF 0x22
+#define ST7703_CMD_ALL_PIXEL_ON	 0x23
+#define ST7703_CMD_SETDISP	 0xB2
+#define ST7703_CMD_SETRGBIF	 0xB3
+#define ST7703_CMD_SETCYC	 0xB4
+#define ST7703_CMD_SETBGP	 0xB5
+#define ST7703_CMD_SETVCOM	 0xB6
+#define ST7703_CMD_SETOTP	 0xB7
+#define ST7703_CMD_SETPOWER_EXT	 0xB8
+#define ST7703_CMD_SETEXTC	 0xB9
+#define ST7703_CMD_SETMIPI	 0xBA
+#define ST7703_CMD_SETVDC	 0xBC
+#define ST7703_CMD_SETSCR	 0xC0
+#define ST7703_CMD_SETPOWER	 0xC1
+#define ST7703_CMD_UNK_C6	 0xC6
+#define ST7703_CMD_SETPANEL	 0xCC
+#define ST7703_CMD_SETGAMMA	 0xE0
+#define ST7703_CMD_SETEQ	 0xE3
+#define ST7703_CMD_SETGIP1	 0xE9
+#define ST7703_CMD_SETGIP2	 0xEA
+
+static const char * const regulator_names[] = {
+	"iovcc",
+	"vcc",
+};
+
+struct xbd599 {
+	struct device *dev;
+	struct drm_panel panel;
+	struct gpio_desc *reset_gpio;
+	struct regulator_bulk_data supplies[ARRAY_SIZE(regulator_names)];
+	bool prepared;
+};
+
+static inline struct xbd599 *panel_to_xbd599(struct drm_panel *panel)
+{
+	return container_of(panel, struct xbd599, panel);
+}
+
+#define dsi_dcs_write_seq(dsi, cmd, seq...) do {			\
+		static const u8 d[] = { seq };				\
+		int ret;						\
+		ret = mipi_dsi_dcs_write(dsi, cmd, d, ARRAY_SIZE(d));	\
+		if (ret < 0)						\
+			return ret;					\
+	} while (0)
+
+static int xbd599_init_sequence(struct xbd599 *ctx)
+{
+	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+	struct device *dev = ctx->dev;
+	int ret;
+
+	/*
+	 * Init sequence was supplied by the panel vendor.
+	 */
+	dsi_dcs_write_seq(dsi, ST7703_CMD_SETEXTC,
+			  0xF1, 0x12, 0x83);
+	dsi_dcs_write_seq(dsi, ST7703_CMD_SETMIPI,
+			  0x33, 0x81, 0x05, 0xF9, 0x0E, 0x0E, 0x20, 0x00,
+			  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x44, 0x25,
+			  0x00, 0x91, 0x0a, 0x00, 0x00, 0x02, 0x4F, 0x11,
+			  0x00, 0x00, 0x37);
+	dsi_dcs_write_seq(dsi, ST7703_CMD_SETPOWER_EXT,
+			  0x25, 0x22, 0x20, 0x03);
+	dsi_dcs_write_seq(dsi, ST7703_CMD_SETRGBIF,
+			  0x10, 0x10, 0x05, 0x05, 0x03, 0xFF, 0x00, 0x00,
+			  0x00, 0x00);
+	dsi_dcs_write_seq(dsi, ST7703_CMD_SETSCR,
+			  0x73, 0x73, 0x50, 0x50, 0x00, 0xC0, 0x08, 0x70,
+			  0x00);
+	dsi_dcs_write_seq(dsi, ST7703_CMD_SETVDC, 0x4E);
+	dsi_dcs_write_seq(dsi, ST7703_CMD_SETPANEL, 0x0B);
+	dsi_dcs_write_seq(dsi, ST7703_CMD_SETCYC, 0x80);
+	dsi_dcs_write_seq(dsi, ST7703_CMD_SETDISP, 0xF0, 0x12, 0xF0);
+	dsi_dcs_write_seq(dsi, ST7703_CMD_SETEQ,
+			  0x00, 0x00, 0x0B, 0x0B, 0x10, 0x10, 0x00, 0x00,
+			  0x00, 0x00, 0xFF, 0x00, 0xC0, 0x10);
+	dsi_dcs_write_seq(dsi, 0xC6, 0x01, 0x00, 0xFF, 0xFF, 0x00);
+	dsi_dcs_write_seq(dsi, ST7703_CMD_SETPOWER,
+			  0x74, 0x00, 0x32, 0x32, 0x77, 0xF1, 0xFF, 0xFF,
+			  0xCC, 0xCC, 0x77, 0x77);
+	dsi_dcs_write_seq(dsi, ST7703_CMD_SETBGP, 0x07, 0x07);
+	dsi_dcs_write_seq(dsi, ST7703_CMD_SETVCOM, 0x2C, 0x2C);
+	dsi_dcs_write_seq(dsi, 0xBF, 0x02, 0x11, 0x00);
+
+	dsi_dcs_write_seq(dsi, ST7703_CMD_SETGIP1,
+			  0x82, 0x10, 0x06, 0x05, 0xA2, 0x0A, 0xA5, 0x12,
+			  0x31, 0x23, 0x37, 0x83, 0x04, 0xBC, 0x27, 0x38,
+			  0x0C, 0x00, 0x03, 0x00, 0x00, 0x00, 0x0C, 0x00,
+			  0x03, 0x00, 0x00, 0x00, 0x75, 0x75, 0x31, 0x88,
+			  0x88, 0x88, 0x88, 0x88, 0x88, 0x13, 0x88, 0x64,
+			  0x64, 0x20, 0x88, 0x88, 0x88, 0x88, 0x88, 0x88,
+			  0x02, 0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+			  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00);
+	dsi_dcs_write_seq(dsi, ST7703_CMD_SETGIP2,
+			  0x02, 0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+			  0x00, 0x00, 0x00, 0x00, 0x02, 0x46, 0x02, 0x88,
+			  0x88, 0x88, 0x88, 0x88, 0x88, 0x64, 0x88, 0x13,
+			  0x57, 0x13, 0x88, 0x88, 0x88, 0x88, 0x88, 0x88,
+			  0x75, 0x88, 0x23, 0x14, 0x00, 0x00, 0x02, 0x00,
+			  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+			  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x0A,
+			  0xA5, 0x00, 0x00, 0x00, 0x00);
+	dsi_dcs_write_seq(dsi, ST7703_CMD_SETGAMMA,
+			  0x00, 0x09, 0x0D, 0x23, 0x27, 0x3C, 0x41, 0x35,
+			  0x07, 0x0D, 0x0E, 0x12, 0x13, 0x10, 0x12, 0x12,
+			  0x18, 0x00, 0x09, 0x0D, 0x23, 0x27, 0x3C, 0x41,
+			  0x35, 0x07, 0x0D, 0x0E, 0x12, 0x13, 0x10, 0x12,
+			  0x12, 0x18);
+	msleep(20);
+
+	ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
+	if (ret < 0) {
+		DRM_DEV_ERROR(dev, "Failed to exit sleep mode\n");
+		return ret;
+	}
+	msleep(250);
+
+	ret = mipi_dsi_dcs_set_display_on(dsi);
+	if (ret)
+		return ret;
+	msleep(50);
+
+	DRM_DEV_DEBUG_DRIVER(dev, "Panel init sequence done\n");
+	return 0;
+}
+
+static int xbd599_prepare(struct drm_panel *panel)
+{
+	struct xbd599 *ctx = panel_to_xbd599(panel);
+	int ret;
+
+	if (ctx->prepared)
+		return 0;
+
+	ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
+	if (ret)
+		return ret;
+
+	DRM_DEV_DEBUG_DRIVER(ctx->dev, "Resetting the panel\n");
+	gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+	usleep_range(20, 40);
+	gpiod_set_value_cansleep(ctx->reset_gpio, 0);
+	msleep(20);
+
+	ctx->prepared = true;
+
+	return 0;
+}
+
+static int xbd599_enable(struct drm_panel *panel)
+{
+	struct xbd599 *ctx = panel_to_xbd599(panel);
+	int ret;
+
+	ret = xbd599_init_sequence(ctx);
+	if (ret < 0) {
+		DRM_DEV_ERROR(ctx->dev, "Panel init sequence failed: %d\n",
+			      ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int xbd599_disable(struct drm_panel *panel)
+{
+	struct xbd599 *ctx = panel_to_xbd599(panel);
+	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+
+	return mipi_dsi_dcs_set_display_off(dsi);
+}
+
+static int xbd599_unprepare(struct drm_panel *panel)
+{
+	struct xbd599 *ctx = panel_to_xbd599(panel);
+
+	if (!ctx->prepared)
+		return 0;
+
+	gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+	regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
+	ctx->prepared = false;
+
+	return 0;
+}
+
+static const struct drm_display_mode xbd599_default_mode = {
+	.hdisplay    = 720,
+	.hsync_start = 720 + 40,
+	.hsync_end   = 720 + 40 + 40,
+	.htotal	     = 720 + 40 + 40 + 40,
+	.vdisplay    = 1440,
+	.vsync_start = 1440 + 18,
+	.vsync_end   = 1440 + 18 + 10,
+	.vtotal	     = 1440 + 18 + 10 + 17,
+	.vrefresh    = 60,
+	.clock	     = 69000,
+	.flags	     = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
+
+	.width_mm    = 68,
+	.height_mm   = 136,
+	.type        = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED,
+};
+
+static int xbd599_get_modes(struct drm_panel *panel,
+			    struct drm_connector *connector)
+{
+	struct xbd599 *ctx = panel_to_xbd599(panel);
+	struct drm_display_mode *mode;
+
+	mode = drm_mode_duplicate(connector->dev, &xbd599_default_mode);
+	if (!mode) {
+		DRM_DEV_ERROR(ctx->dev, "Failed to add mode\n");
+		return -ENOMEM;
+	}
+
+	drm_mode_set_name(mode);
+
+	mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
+	connector->display_info.width_mm = mode->width_mm;
+	connector->display_info.height_mm = mode->height_mm;
+	drm_mode_probed_add(connector, mode);
+
+	return 1;
+}
+
+static const struct drm_panel_funcs xbd599_drm_funcs = {
+	.prepare   = xbd599_prepare,
+	.enable    = xbd599_enable,
+	.disable   = xbd599_disable,
+	.unprepare = xbd599_unprepare,
+	.get_modes = xbd599_get_modes,
+};
+
+static int xbd599_probe(struct mipi_dsi_device *dsi)
+{
+	struct device *dev = &dsi->dev;
+	struct xbd599 *ctx;
+	int i, ret;
+
+	ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
+	if (!ctx)
+		return -ENOMEM;
+
+	for (i = 0; i < ARRAY_SIZE(ctx->supplies); i++)
+		ctx->supplies[i].supply = regulator_names[i];
+
+	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ctx->supplies),
+				      ctx->supplies);
+	if (ret < 0) {
+		DRM_DEV_ERROR(&dsi->dev, "cannot get regulators\n");
+		return ret;
+	}
+
+	ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
+	if (IS_ERR(ctx->reset_gpio)) {
+		DRM_DEV_ERROR(dev, "cannot get reset gpio\n");
+		return PTR_ERR(ctx->reset_gpio);
+	}
+
+	mipi_dsi_set_drvdata(dsi, ctx);
+
+	ctx->dev = dev;
+
+	dsi->lanes = 4;
+	dsi->format = MIPI_DSI_FMT_RGB888;
+	dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE;
+
+	drm_panel_init(&ctx->panel, &dsi->dev, &xbd599_drm_funcs,
+		       DRM_MODE_CONNECTOR_DSI);
+
+	ret = drm_panel_of_backlight(&ctx->panel);
+	if (ret)
+		return ret;
+
+	drm_panel_add(&ctx->panel);
+
+	ret = mipi_dsi_attach(dsi);
+	if (ret < 0) {
+		DRM_DEV_ERROR(dev, "mipi_dsi_attach failed. Is host ready?\n");
+		drm_panel_remove(&ctx->panel);
+		return ret;
+	}
+
+	DRM_DEV_INFO(dev, "%ux%u@%u %ubpp dsi %udl - ready\n",
+		     xbd599_default_mode.hdisplay,
+		     xbd599_default_mode.vdisplay,
+		     xbd599_default_mode.vrefresh,
+		     mipi_dsi_pixel_format_to_bpp(dsi->format), dsi->lanes);
+
+	return 0;
+}
+
+static void xbd599_shutdown(struct mipi_dsi_device *dsi)
+{
+	struct xbd599 *ctx = mipi_dsi_get_drvdata(dsi);
+	int ret;
+
+	ret = drm_panel_unprepare(&ctx->panel);
+	if (ret < 0)
+		DRM_DEV_ERROR(&dsi->dev, "Failed to unprepare panel: %d\n",
+			      ret);
+}
+
+static int xbd599_remove(struct mipi_dsi_device *dsi)
+{
+	struct xbd599 *ctx = mipi_dsi_get_drvdata(dsi);
+	int ret;
+
+	xbd599_shutdown(dsi);
+
+	ret = mipi_dsi_detach(dsi);
+	if (ret < 0)
+		DRM_DEV_ERROR(&dsi->dev, "Failed to detach from DSI host: %d\n",
+			      ret);
+
+	drm_panel_remove(&ctx->panel);
+
+	return 0;
+}
+
+static const struct of_device_id xbd599_of_match[] = {
+	{ .compatible = "xingbangda,xbd599", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, xbd599_of_match);
+
+static struct mipi_dsi_driver xbd599_driver = {
+	.probe	= xbd599_probe,
+	.remove = xbd599_remove,
+	.shutdown = xbd599_shutdown,
+	.driver = {
+		.name = "panel-xingbangda-xbd599",
+		.of_match_table = xbd599_of_match,
+	},
+};
+module_mipi_dsi_driver(xbd599_driver);
+
+MODULE_AUTHOR("Icenowy Zheng <icenowy@aosc.io>");
+MODULE_DESCRIPTION("DRM driver for Xingbangda XBD599 MIPI DSI panel");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
index 4f5efcace68e..5af808078efd 100644
--- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
+++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
@@ -556,7 +556,7 @@ static void sun6i_dsi_setup_timings(struct sun6i_dsi *dsi,
 		 */
 #define HSA_PACKET_OVERHEAD	10
 		hsa = max((unsigned int)HSA_PACKET_OVERHEAD,
-			  (mode->hsync_end - mode->hsync_start) * Bpp - HSA_PACKET_OVERHEAD);
+			  (mode->hsync_end - mode->hsync_start) * Bpp) - HSA_PACKET_OVERHEAD;

 		/*
 		 * The backporch is set using a blanking packet (4
@@ -565,7 +565,7 @@ static void sun6i_dsi_setup_timings(struct sun6i_dsi *dsi,
 		 */
 #define HBP_PACKET_OVERHEAD	6
 		hbp = max((unsigned int)HBP_PACKET_OVERHEAD,
-			  (mode->htotal - mode->hsync_end) * Bpp - HBP_PACKET_OVERHEAD);
+			  (mode->htotal - mode->hsync_end) * Bpp) - HBP_PACKET_OVERHEAD;

 		/*
 		 * The frontporch is set using a sync event (4 bytes)
@@ -575,7 +575,7 @@ static void sun6i_dsi_setup_timings(struct sun6i_dsi *dsi,
 		 */
 #define HFP_PACKET_OVERHEAD	16
 		hfp = max((unsigned int)HFP_PACKET_OVERHEAD,
-			  (mode->hsync_start - mode->hdisplay) * Bpp - HFP_PACKET_OVERHEAD);
+			  (mode->hsync_start - mode->hdisplay) * Bpp) - HFP_PACKET_OVERHEAD;

 		/*
 		 * The blanking is set using a sync event (4 bytes)
@@ -584,8 +584,8 @@ static void sun6i_dsi_setup_timings(struct sun6i_dsi *dsi,
 		 */
 #define HBLK_PACKET_OVERHEAD	10
 		hblk = max((unsigned int)HBLK_PACKET_OVERHEAD,
-			   (mode->htotal - (mode->hsync_end - mode->hsync_start)) * Bpp -
-			   HBLK_PACKET_OVERHEAD);
+			   (mode->htotal - (mode->hsync_end - mode->hsync_start)) * Bpp) -
+			   HBLK_PACKET_OVERHEAD;

 		/*
 		 * And I'm not entirely sure what vblk is about. The driver in
diff --git a/drivers/hid/hid-rmi.c b/drivers/hid/hid-rmi.c
index 311eee599ce9..2460c6bd46f8 100644
--- a/drivers/hid/hid-rmi.c
+++ b/drivers/hid/hid-rmi.c
@@ -322,19 +322,12 @@ static int rmi_input_event(struct hid_device *hdev, u8 *data, int size)
 {
 	struct rmi_data *hdata = hid_get_drvdata(hdev);
 	struct rmi_device *rmi_dev = hdata->xport.rmi_dev;
-	unsigned long flags;

 	if (!(test_bit(RMI_STARTED, &hdata->flags)))
 		return 0;

-	local_irq_save(flags);
-
 	rmi_set_attn_data(rmi_dev, data[1], &data[2], size - 2);

-	generic_handle_irq(hdata->rmi_irq);
-
-	local_irq_restore(flags);
-
 	return 1;
 }

@@ -591,56 +584,6 @@ static const struct rmi_transport_ops hid_rmi_ops = {
 	.reset		= rmi_hid_reset,
 };

-static void rmi_irq_teardown(void *data)
-{
-	struct rmi_data *hdata = data;
-	struct irq_domain *domain = hdata->domain;
-
-	if (!domain)
-		return;
-
-	irq_dispose_mapping(irq_find_mapping(domain, 0));
-
-	irq_domain_remove(domain);
-	hdata->domain = NULL;
-	hdata->rmi_irq = 0;
-}
-
-static int rmi_irq_map(struct irq_domain *h, unsigned int virq,
-		       irq_hw_number_t hw_irq_num)
-{
-	irq_set_chip_and_handler(virq, &dummy_irq_chip, handle_simple_irq);
-
-	return 0;
-}
-
-static const struct irq_domain_ops rmi_irq_ops = {
-	.map = rmi_irq_map,
-};
-
-static int rmi_setup_irq_domain(struct hid_device *hdev)
-{
-	struct rmi_data *hdata = hid_get_drvdata(hdev);
-	int ret;
-
-	hdata->domain = irq_domain_create_linear(hdev->dev.fwnode, 1,
-						 &rmi_irq_ops, hdata);
-	if (!hdata->domain)
-		return -ENOMEM;
-
-	ret = devm_add_action_or_reset(&hdev->dev, &rmi_irq_teardown, hdata);
-	if (ret)
-		return ret;
-
-	hdata->rmi_irq = irq_create_mapping(hdata->domain, 0);
-	if (hdata->rmi_irq <= 0) {
-		hid_err(hdev, "Can't allocate an IRQ\n");
-		return hdata->rmi_irq < 0 ? hdata->rmi_irq : -ENXIO;
-	}
-
-	return 0;
-}
-
 static int rmi_probe(struct hid_device *hdev, const struct hid_device_id *id)
 {
 	struct rmi_data *data = NULL;
@@ -713,18 +656,11 @@ static int rmi_probe(struct hid_device *hdev, const struct hid_device_id *id)

 	mutex_init(&data->page_mutex);

-	ret = rmi_setup_irq_domain(hdev);
-	if (ret) {
-		hid_err(hdev, "failed to allocate IRQ domain\n");
-		return ret;
-	}
-
 	if (data->device_flags & RMI_DEVICE_HAS_PHYS_BUTTONS)
 		rmi_hid_pdata.gpio_data.disable = true;

 	data->xport.dev = hdev->dev.parent;
 	data->xport.pdata = rmi_hid_pdata;
-	data->xport.pdata.irq = data->rmi_irq;
 	data->xport.proto_name = "hid";
 	data->xport.ops = &hid_rmi_ops;

diff --git a/drivers/input/rmi4/rmi_driver.c b/drivers/input/rmi4/rmi_driver.c
index 258d5fe3d395..f7298e3dc8f3 100644
--- a/drivers/input/rmi4/rmi_driver.c
+++ b/drivers/input/rmi4/rmi_driver.c
@@ -182,34 +182,47 @@ void rmi_set_attn_data(struct rmi_device *rmi_dev, unsigned long irq_status,
 	attn_data.data = fifo_data;

 	kfifo_put(&drvdata->attn_fifo, attn_data);
+
+	schedule_work(&drvdata->attn_work);
 }
 EXPORT_SYMBOL_GPL(rmi_set_attn_data);

-static irqreturn_t rmi_irq_fn(int irq, void *dev_id)
+static void attn_callback(struct work_struct *work)
 {
-	struct rmi_device *rmi_dev = dev_id;
-	struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev);
+	struct rmi_driver_data *drvdata = container_of(work,
+							struct rmi_driver_data,
+							attn_work);
 	struct rmi4_attn_data attn_data = {0};
 	int ret, count;

 	count = kfifo_get(&drvdata->attn_fifo, &attn_data);
-	if (count) {
-		*(drvdata->irq_status) = attn_data.irq_status;
-		drvdata->attn_data = attn_data;
-	}
+	if (!count)
+		return;

-	ret = rmi_process_interrupt_requests(rmi_dev);
+	*(drvdata->irq_status) = attn_data.irq_status;
+	drvdata->attn_data = attn_data;
+
+	ret = rmi_process_interrupt_requests(drvdata->rmi_dev);
 	if (ret)
-		rmi_dbg(RMI_DEBUG_CORE, &rmi_dev->dev,
+		rmi_dbg(RMI_DEBUG_CORE, &drvdata->rmi_dev->dev,
 			"Failed to process interrupt request: %d\n", ret);

-	if (count) {
-		kfree(attn_data.data);
-		drvdata->attn_data.data = NULL;
-	}
+	kfree(attn_data.data);
+	drvdata->attn_data.data = NULL;

 	if (!kfifo_is_empty(&drvdata->attn_fifo))
-		return rmi_irq_fn(irq, dev_id);
+		schedule_work(&drvdata->attn_work);
+}
+
+static irqreturn_t rmi_irq_fn(int irq, void *dev_id)
+{
+	struct rmi_device *rmi_dev = dev_id;
+	int ret;
+
+	ret = rmi_process_interrupt_requests(rmi_dev);
+	if (ret)
+		rmi_dbg(RMI_DEBUG_CORE, &rmi_dev->dev,
+			"Failed to process interrupt request: %d\n", ret);

 	return IRQ_HANDLED;
 }
@@ -217,7 +230,6 @@ static irqreturn_t rmi_irq_fn(int irq, void *dev_id)
 static int rmi_irq_init(struct rmi_device *rmi_dev)
 {
 	struct rmi_device_platform_data *pdata = rmi_get_platform_data(rmi_dev);
-	struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
 	int irq_flags = irq_get_trigger_type(pdata->irq);
 	int ret;

@@ -235,8 +247,6 @@ static int rmi_irq_init(struct rmi_device *rmi_dev)
 		return ret;
 	}

-	data->enabled = true;
-
 	return 0;
 }

@@ -886,23 +896,27 @@ void rmi_enable_irq(struct rmi_device *rmi_dev, bool clear_wake)
 	if (data->enabled)
 		goto out;

-	enable_irq(irq);
-	data->enabled = true;
-	if (clear_wake && device_may_wakeup(rmi_dev->xport->dev)) {
-		retval = disable_irq_wake(irq);
-		if (retval)
-			dev_warn(&rmi_dev->dev,
-				 "Failed to disable irq for wake: %d\n",
-				 retval);
-	}
+	if (irq) {
+		enable_irq(irq);
+		data->enabled = true;
+		if (clear_wake && device_may_wakeup(rmi_dev->xport->dev)) {
+			retval = disable_irq_wake(irq);
+			if (retval)
+				dev_warn(&rmi_dev->dev,
+					 "Failed to disable irq for wake: %d\n",
+					 retval);
+		}

-	/*
-	 * Call rmi_process_interrupt_requests() after enabling irq,
-	 * otherwise we may lose interrupt on edge-triggered systems.
-	 */
-	irq_flags = irq_get_trigger_type(pdata->irq);
-	if (irq_flags & IRQ_TYPE_EDGE_BOTH)
-		rmi_process_interrupt_requests(rmi_dev);
+		/*
+		 * Call rmi_process_interrupt_requests() after enabling irq,
+		 * otherwise we may lose interrupt on edge-triggered systems.
+		 */
+		irq_flags = irq_get_trigger_type(pdata->irq);
+		if (irq_flags & IRQ_TYPE_EDGE_BOTH)
+			rmi_process_interrupt_requests(rmi_dev);
+	} else {
+		data->enabled = true;
+	}

 out:
 	mutex_unlock(&data->enabled_mutex);
@@ -922,20 +936,22 @@ void rmi_disable_irq(struct rmi_device *rmi_dev, bool enable_wake)
 		goto out;

 	data->enabled = false;
-	disable_irq(irq);
-	if (enable_wake && device_may_wakeup(rmi_dev->xport->dev)) {
-		retval = enable_irq_wake(irq);
-		if (retval)
-			dev_warn(&rmi_dev->dev,
-				 "Failed to enable irq for wake: %d\n",
-				 retval);
-	}
-
-	/* make sure the fifo is clean */
-	while (!kfifo_is_empty(&data->attn_fifo)) {
-		count = kfifo_get(&data->attn_fifo, &attn_data);
-		if (count)
-			kfree(attn_data.data);
+	if (irq) {
+		disable_irq(irq);
+		if (enable_wake && device_may_wakeup(rmi_dev->xport->dev)) {
+			retval = enable_irq_wake(irq);
+			if (retval)
+				dev_warn(&rmi_dev->dev,
+					 "Failed to enable irq for wake: %d\n",
+					 retval);
+		}
+	} else {
+		/* make sure the fifo is clean */
+		while (!kfifo_is_empty(&data->attn_fifo)) {
+			count = kfifo_get(&data->attn_fifo, &attn_data);
+			if (count)
+				kfree(attn_data.data);
+		}
 	}

 out:
@@ -981,6 +997,8 @@ static int rmi_driver_remove(struct device *dev)
 	irq_domain_remove(data->irqdomain);
 	data->irqdomain = NULL;

+	cancel_work_sync(&data->attn_work);
+
 	rmi_f34_remove_sysfs(rmi_dev);
 	rmi_free_function_list(rmi_dev);

@@ -1219,9 +1237,15 @@ static int rmi_driver_probe(struct device *dev)
 		}
 	}

-	retval = rmi_irq_init(rmi_dev);
-	if (retval < 0)
-		goto err_destroy_functions;
+	if (pdata->irq) {
+		retval = rmi_irq_init(rmi_dev);
+		if (retval < 0)
+			goto err_destroy_functions;
+	}
+
+	data->enabled = true;
+
+	INIT_WORK(&data->attn_work, attn_callback);

 	if (data->f01_container->dev.driver) {
 		/* Driver already bound, so enable ATTN now. */
diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
index fd5f59373fc6..8a11aa9e0318 100644
--- a/drivers/iommu/iommu.c
+++ b/drivers/iommu/iommu.c
@@ -7,6 +7,7 @@
 #define pr_fmt(fmt)    "iommu: " fmt

 #include <linux/device.h>
+#include <linux/dmi.h>
 #include <linux/kernel.h>
 #include <linux/bug.h>
 #include <linux/types.h>
@@ -3060,6 +3061,27 @@ u32 iommu_sva_get_pasid(struct iommu_sva *handle)
 }
 EXPORT_SYMBOL_GPL(iommu_sva_get_pasid);

+#ifdef CONFIG_ARM64
+static int __init iommu_quirks(void)
+{
+	const char *vendor, *name;
+
+	vendor = dmi_get_system_info(DMI_SYS_VENDOR);
+	name = dmi_get_system_info(DMI_PRODUCT_NAME);
+
+	if (vendor &&
+	    (strncmp(vendor, "GIGABYTE", 8) == 0 && name &&
+	     (strncmp(name, "R120", 4) == 0 ||
+	      strncmp(name, "R270", 4) == 0))) {
+		pr_warn("Gigabyte %s detected, force iommu passthrough mode", name);
+		iommu_def_domain_type = IOMMU_DOMAIN_IDENTITY;
+	}
+
+	return 0;
+}
+arch_initcall(iommu_quirks);
+#endif
+
 /*
  * Changes the default domain of an iommu group that has *only* one device
  *
diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig
index 22c5529e9a65..259ff5ff3f24 100644
--- a/drivers/pci/controller/dwc/Kconfig
+++ b/drivers/pci/controller/dwc/Kconfig
@@ -254,25 +254,27 @@ config PCI_MESON
 	  implement the driver.

 config PCIE_TEGRA194
-	tristate
+	bool

 config PCIE_TEGRA194_HOST
-	tristate "NVIDIA Tegra194 (and later) PCIe controller - Host Mode"
+	bool "NVIDIA Tegra194 (and later) PCIe controller - Host Mode"
 	depends on ARCH_TEGRA_194_SOC || COMPILE_TEST
 	depends on PCI_MSI_IRQ_DOMAIN
 	select PCIE_DW_HOST
 	select PHY_TEGRA194_P2U
 	select PCIE_TEGRA194
+	default y if ARCH_TEGRA_194_SOC
 	help
 	  Enables support for the PCIe controller in the NVIDIA Tegra194 SoC to
 	  work in host mode. There are two instances of PCIe controllers in
 	  Tegra194. This controller can work either as EP or RC. In order to
 	  enable host-specific features PCIE_TEGRA194_HOST must be selected and
 	  in order to enable device-specific features PCIE_TEGRA194_EP must be
-	  selected. This uses the DesignWare core.
+	  selected. This uses the DesignWare core. ACPI platforms with Tegra194
+	  don't need to enable this.

 config PCIE_TEGRA194_EP
-	tristate "NVIDIA Tegra194 (and later) PCIe controller - Endpoint Mode"
+	bool "NVIDIA Tegra194 (and later) PCIe controller - Endpoint Mode"
 	depends on ARCH_TEGRA_194_SOC || COMPILE_TEST
 	depends on PCI_ENDPOINT
 	select PCIE_DW_EP
diff --git a/drivers/pci/controller/dwc/Makefile b/drivers/pci/controller/dwc/Makefile
index a751553fa0db..dbb981876556 100644
--- a/drivers/pci/controller/dwc/Makefile
+++ b/drivers/pci/controller/dwc/Makefile
@@ -17,7 +17,6 @@ obj-$(CONFIG_PCIE_INTEL_GW) += pcie-intel-gw.o
 obj-$(CONFIG_PCIE_KIRIN) += pcie-kirin.o
 obj-$(CONFIG_PCIE_HISI_STB) += pcie-histb.o
 obj-$(CONFIG_PCI_MESON) += pci-meson.o
-obj-$(CONFIG_PCIE_TEGRA194) += pcie-tegra194.o
 obj-$(CONFIG_PCIE_UNIPHIER) += pcie-uniphier.o
 obj-$(CONFIG_PCIE_UNIPHIER_EP) += pcie-uniphier-ep.o

@@ -34,4 +33,5 @@ obj-$(CONFIG_PCIE_UNIPHIER_EP) += pcie-uniphier-ep.o
 ifdef CONFIG_PCI
 obj-$(CONFIG_ARM64) += pcie-al.o
 obj-$(CONFIG_ARM64) += pcie-hisi.o
+obj-$(CONFIG_ARM64) += pcie-tegra194.o
 endif
diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c
index 6fa216e52d14..1090a9cfe4f0 100644
--- a/drivers/pci/controller/dwc/pcie-tegra194.c
+++ b/drivers/pci/controller/dwc/pcie-tegra194.c
@@ -22,6 +22,8 @@
 #include <linux/of_irq.h>
 #include <linux/of_pci.h>
 #include <linux/pci.h>
+#include <linux/pci-acpi.h>
+#include <linux/pci-ecam.h>
 #include <linux/phy/phy.h>
 #include <linux/pinctrl/consumer.h>
 #include <linux/platform_device.h>
@@ -311,6 +313,103 @@ struct tegra_pcie_dw_of_data {
 	enum dw_pcie_device_mode mode;
 };

+#if defined(CONFIG_ACPI) && defined(CONFIG_PCI_QUIRKS)
+struct tegra194_pcie_acpi  {
+	void __iomem *config_base;
+	void __iomem *iatu_base;
+	void __iomem *dbi_base;
+};
+
+static int tegra194_acpi_init(struct pci_config_window *cfg)
+{
+	struct device *dev = cfg->parent;
+	struct tegra194_pcie_acpi *pcie;
+
+	pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
+	if (!pcie)
+		return -ENOMEM;
+
+	pcie->config_base = cfg->win;
+	pcie->iatu_base = cfg->win + SZ_256K;
+	pcie->dbi_base = cfg->win + SZ_512K;
+	cfg->priv = pcie;
+
+	return 0;
+}
+
+static inline void atu_reg_write(struct tegra194_pcie_acpi *pcie, int index,
+				 u32 val, u32 reg)
+{
+	u32 offset = PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(index);
+
+	writel(val, pcie->iatu_base + offset + reg);
+}
+
+static void program_outbound_atu(struct tegra194_pcie_acpi *pcie, int index,
+				 int type, u64 cpu_addr, u64 pci_addr, u64 size)
+{
+	atu_reg_write(pcie, index, lower_32_bits(cpu_addr),
+		      PCIE_ATU_LOWER_BASE);
+	atu_reg_write(pcie, index, upper_32_bits(cpu_addr),
+		      PCIE_ATU_UPPER_BASE);
+	atu_reg_write(pcie, index, lower_32_bits(pci_addr),
+		      PCIE_ATU_LOWER_TARGET);
+	atu_reg_write(pcie, index, lower_32_bits(cpu_addr + size - 1),
+		      PCIE_ATU_LIMIT);
+	atu_reg_write(pcie, index, upper_32_bits(pci_addr),
+		      PCIE_ATU_UPPER_TARGET);
+	atu_reg_write(pcie, index, type, PCIE_ATU_CR1);
+	atu_reg_write(pcie, index, PCIE_ATU_ENABLE, PCIE_ATU_CR2);
+}
+
+static void __iomem *tegra194_map_bus(struct pci_bus *bus,
+				      unsigned int devfn, int where)
+{
+	struct pci_config_window *cfg = bus->sysdata;
+	struct tegra194_pcie_acpi *pcie = cfg->priv;
+	u32 busdev;
+	int type;
+
+	if (bus->number < cfg->busr.start || bus->number > cfg->busr.end)
+		return NULL;
+
+	if (bus->number == cfg->busr.start) {
+		if (PCI_SLOT(devfn) == 0)
+			return pcie->dbi_base + where;
+		else
+			return NULL;
+	}
+
+	busdev = PCIE_ATU_BUS(bus->number) | PCIE_ATU_DEV(PCI_SLOT(devfn)) |
+		 PCIE_ATU_FUNC(PCI_FUNC(devfn));
+
+	if (bus->parent->number == cfg->busr.start) {
+		if (PCI_SLOT(devfn) == 0)
+			type = PCIE_ATU_TYPE_CFG0;
+		else
+			return NULL;
+	} else {
+		type = PCIE_ATU_TYPE_CFG1;
+	}
+
+	program_outbound_atu(pcie, 0, type, cfg->res.start, busdev, SZ_256K);
+
+	return (void __iomem *)(pcie->config_base + where);
+}
+
+const struct pci_ecam_ops tegra194_pcie_ops = {
+	.bus_shift	= 20,
+	.init		= tegra194_acpi_init,
+	.pci_ops	= {
+		.map_bus	= tegra194_map_bus,
+		.read		= pci_generic_config_read,
+		.write		= pci_generic_config_write,
+	}
+};
+#endif /* defined(CONFIG_ACPI) && defined(CONFIG_PCI_QUIRKS) */
+
+#ifdef CONFIG_PCIE_TEGRA194
+
 static inline struct tegra_pcie_dw *to_tegra_pcie(struct dw_pcie *pci)
 {
 	return container_of(pci, struct tegra_pcie_dw, pci);
@@ -2311,3 +2410,6 @@ MODULE_DEVICE_TABLE(of, tegra_pcie_dw_of_match);
 MODULE_AUTHOR("Vidya Sagar <vidyas@nvidia.com>");
 MODULE_DESCRIPTION("NVIDIA PCIe host controller driver");
 MODULE_LICENSE("GPL v2");
+
+#endif /* CONFIG_PCIE_TEGRA194 */
+
diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
index d41257f43a8f..e3456b058106 100644
--- a/drivers/pci/controller/pcie-brcmstb.c
+++ b/drivers/pci/controller/pcie-brcmstb.c
@@ -857,6 +857,7 @@ static int brcm_pcie_setup(struct brcm_pcie *pcie)

 	/* Reset the bridge */
 	pcie->bridge_sw_init_set(pcie, 1);
+	pcie->perst_set(pcie, 1);
 	usleep_range(100, 200);

 	/* Take the bridge out of reset */
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 653660e3ba9e..98851d00dc4d 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -4143,6 +4143,30 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM, 0x9000,
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM, 0x9084,
 				quirk_bridge_cavm_thrx2_pcie_root);

+/*
+ * PCI BAR 5 is not setup correctly for the on-board AHCI controller
+ * on Broadcom's Vulcan processor. Added a quirk to fix BAR 5 by
+ * using BAR 4's resources which are populated correctly and NOT
+ * actually used by the AHCI controller.
+ */
+static void quirk_fix_vulcan_ahci_bars(struct pci_dev *dev)
+{
+	struct resource *r =  &dev->resource[4];
+
+	if (!(r->flags & IORESOURCE_MEM) || (r->start == 0))
+		return;
+
+	/* Set BAR5 resource to BAR4 */
+	dev->resource[5] = *r;
+
+	/* Update BAR5 in pci config space */
+	pci_write_config_dword(dev, PCI_BASE_ADDRESS_5, r->start);
+
+	/* Clear BAR4's resource */
+	memset(r, 0, sizeof(*r));
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM, 0x9027, quirk_fix_vulcan_ahci_bars);
+
 /*
  * Intersil/Techwell TW686[4589]-based video capture cards have an empty (zero)
  * class code.  Fix it.
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index ac4125ec0660..3a8ade8bb073 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -624,6 +624,7 @@ config IDEAPAD_LAPTOP
 	depends on BACKLIGHT_CLASS_DEVICE
 	depends on ACPI_VIDEO || ACPI_VIDEO = n
 	depends on ACPI_WMI || ACPI_WMI = n
+	select ACPI_PLATFORM_PROFILE
 	select INPUT_SPARSEKMAP
 	help
 	  This is a driver for Lenovo IdeaPad netbooks contains drivers for
@@ -655,6 +656,7 @@ config THINKPAD_ACPI
 	depends on RFKILL || RFKILL = n
 	depends on ACPI_VIDEO || ACPI_VIDEO = n
 	depends on BACKLIGHT_CLASS_DEVICE
+	select ACPI_PLATFORM_PROFILE
 	select HWMON
 	select NVRAM
 	select NEW_LEDS
diff --git a/drivers/platform/x86/ideapad-laptop.c b/drivers/platform/x86/ideapad-laptop.c
index 5b81bafa5c16..cc42af2a0a98 100644
--- a/drivers/platform/x86/ideapad-laptop.c
+++ b/drivers/platform/x86/ideapad-laptop.c
@@ -15,6 +15,7 @@
 #include <linux/acpi.h>
 #include <linux/rfkill.h>
 #include <linux/platform_device.h>
+#include <linux/platform_profile.h>
 #include <linux/input.h>
 #include <linux/input/sparse-keymap.h>
 #include <linux/backlight.h>
@@ -77,6 +78,13 @@ enum {
 	VPCCMD_W_BL_POWER = 0x33,
 };

+struct ideapad_dytc_priv {
+	enum platform_profile_option current_profile;
+	struct platform_profile_handler pprof;
+	struct mutex mutex;
+	struct ideapad_private *priv;
+};
+
 struct ideapad_rfk_priv {
 	int dev;
 	struct ideapad_private *priv;
@@ -89,6 +97,7 @@ struct ideapad_private {
 	struct platform_device *platform_device;
 	struct input_dev *inputdev;
 	struct backlight_device *blightdev;
+	struct ideapad_dytc_priv *dytc;
 	struct dentry *debug;
 	unsigned long cfg;
 	bool has_hw_rfkill_switch;
@@ -137,6 +146,28 @@ static int method_int1(acpi_handle handle, char *method, int cmd)
 	return ACPI_FAILURE(status) ? -1 : 0;
 }

+static int method_dytc(acpi_handle handle, int cmd, int *ret)
+{
+	acpi_status status;
+	unsigned long long result;
+	struct acpi_object_list params;
+	union acpi_object in_obj;
+
+	params.count = 1;
+	params.pointer = &in_obj;
+	in_obj.type = ACPI_TYPE_INTEGER;
+	in_obj.integer.value = cmd;
+
+	status = acpi_evaluate_integer(handle, "DYTC", &params, &result);
+
+	if (ACPI_FAILURE(status)) {
+		*ret = -1;
+		return -1;
+	}
+	*ret = result;
+	return 0;
+}
+
 static int method_vpcr(acpi_handle handle, int cmd, int *ret)
 {
 	acpi_status status;
@@ -549,6 +580,257 @@ static const struct attribute_group ideapad_attribute_group = {
 	.attrs = ideapad_attributes
 };

+/*
+ * DYTC Platform profile
+ */
+#define DYTC_CMD_QUERY        0 /* To get DYTC status - enable/revision */
+#define DYTC_CMD_SET          1 /* To enable/disable IC function mode */
+#define DYTC_CMD_GET          2 /* To get current IC function and mode */
+#define DYTC_CMD_RESET    0x1ff /* To reset back to default */
+
+#define DYTC_QUERY_ENABLE_BIT 8  /* Bit        8 - 0 = disabled, 1 = enabled */
+#define DYTC_QUERY_SUBREV_BIT 16 /* Bits 16 - 27 - sub revision */
+#define DYTC_QUERY_REV_BIT    28 /* Bits 28 - 31 - revision */
+
+#define DYTC_GET_FUNCTION_BIT 8  /* Bits  8-11 - function setting */
+#define DYTC_GET_MODE_BIT     12 /* Bits 12-15 - mode setting */
+
+#define DYTC_SET_FUNCTION_BIT 12 /* Bits 12-15 - function setting */
+#define DYTC_SET_MODE_BIT     16 /* Bits 16-19 - mode setting */
+#define DYTC_SET_VALID_BIT    20 /* Bit     20 - 1 = on, 0 = off */
+
+#define DYTC_FUNCTION_STD     0  /* Function = 0, standard mode */
+#define DYTC_FUNCTION_CQL     1  /* Function = 1, lap mode */
+#define DYTC_FUNCTION_MMC     11 /* Function = 11, desk mode */
+
+#define DYTC_MODE_PERFORM     2  /* High power mode aka performance */
+#define DYTC_MODE_LOW_POWER       3  /* Low power mode aka quiet */
+#define DYTC_MODE_BALANCE   0xF  /* Default mode aka balanced */
+
+#define DYTC_SET_COMMAND(function, mode, on) \
+	(DYTC_CMD_SET | (function) << DYTC_SET_FUNCTION_BIT | \
+	 (mode) << DYTC_SET_MODE_BIT | \
+	 (on) << DYTC_SET_VALID_BIT)
+
+#define DYTC_DISABLE_CQL DYTC_SET_COMMAND(DYTC_FUNCTION_CQL, DYTC_MODE_BALANCE, 0)
+
+#define DYTC_ENABLE_CQL DYTC_SET_COMMAND(DYTC_FUNCTION_CQL, DYTC_MODE_BALANCE, 1)
+
+static int convert_dytc_to_profile(int dytcmode, enum platform_profile_option *profile)
+{
+	switch (dytcmode) {
+	case DYTC_MODE_LOW_POWER:
+		*profile = PLATFORM_PROFILE_LOW_POWER;
+		break;
+	case DYTC_MODE_BALANCE:
+		*profile =  PLATFORM_PROFILE_BALANCED;
+		break;
+	case DYTC_MODE_PERFORM:
+		*profile =  PLATFORM_PROFILE_PERFORMANCE;
+		break;
+	default: /* Unknown mode */
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int convert_profile_to_dytc(enum platform_profile_option profile, int *perfmode)
+{
+	switch (profile) {
+	case PLATFORM_PROFILE_LOW_POWER:
+		*perfmode = DYTC_MODE_LOW_POWER;
+		break;
+	case PLATFORM_PROFILE_BALANCED:
+		*perfmode = DYTC_MODE_BALANCE;
+		break;
+	case PLATFORM_PROFILE_PERFORMANCE:
+		*perfmode = DYTC_MODE_PERFORM;
+		break;
+	default: /* Unknown profile */
+		return -EOPNOTSUPP;
+	}
+	return 0;
+}
+
+/*
+ * dytc_profile_get: Function to register with platform_profile
+ * handler. Returns current platform profile.
+ */
+int dytc_profile_get(struct platform_profile_handler *pprof,
+			enum platform_profile_option *profile)
+{
+	struct ideapad_dytc_priv *dytc;
+
+	dytc = container_of(pprof, struct ideapad_dytc_priv, pprof);
+	*profile = dytc->current_profile;
+	return 0;
+}
+
+/*
+ * Helper function - check if we are in CQL mode and if we are
+ *  -  disable CQL,
+ *  - run the command
+ *  - enable CQL
+ *  If not in CQL mode, just run the command
+ */
+int dytc_cql_command(struct ideapad_private *priv, int command, int *output)
+{
+	int err, cmd_err, dummy;
+	int cur_funcmode;
+
+	/* Determine if we are in CQL mode. This alters the commands we do */
+	err = method_dytc(priv->adev->handle, DYTC_CMD_GET, output);
+	if (err)
+		return err;
+
+	cur_funcmode = (*output >> DYTC_GET_FUNCTION_BIT) & 0xF;
+	/* Check if we're OK to return immediately */
+	if ((command == DYTC_CMD_GET) && (cur_funcmode != DYTC_FUNCTION_CQL))
+		return 0;
+
+	if (cur_funcmode == DYTC_FUNCTION_CQL) {
+		err = method_dytc(priv->adev->handle, DYTC_DISABLE_CQL, &dummy);
+		if (err)
+			return err;
+	}
+
+	cmd_err = method_dytc(priv->adev->handle, command,	output);
+	/* Check return condition after we've restored CQL state */
+
+	if (cur_funcmode == DYTC_FUNCTION_CQL) {
+		err = method_dytc(priv->adev->handle, DYTC_ENABLE_CQL, &dummy);
+		if (err)
+			return err;
+	}
+
+	return cmd_err;
+}
+
+/*
+ * dytc_profile_set: Function to register with platform_profile
+ * handler. Sets current platform profile.
+ */
+int dytc_profile_set(struct platform_profile_handler *pprof,
+			enum platform_profile_option profile)
+{
+	struct ideapad_dytc_priv *dytc;
+	struct ideapad_private *priv;
+	int output;
+	int err;
+
+	dytc = container_of(pprof, struct ideapad_dytc_priv, pprof);
+	priv = dytc->priv;
+
+	err = mutex_lock_interruptible(&dytc->mutex);
+	if (err)
+		return err;
+
+	if (profile == PLATFORM_PROFILE_BALANCED) {
+		/* To get back to balanced mode we just issue a reset command */
+		err = method_dytc(priv->adev->handle, DYTC_CMD_RESET, &output);
+		if (err)
+			goto unlock;
+	} else {
+		int perfmode;
+
+		err = convert_profile_to_dytc(profile, &perfmode);
+		if (err)
+			goto unlock;
+
+		/* Determine if we are in CQL mode. This alters the commands we do */
+		err = dytc_cql_command(priv,
+				DYTC_SET_COMMAND(DYTC_FUNCTION_MMC, perfmode, 1),
+				&output);
+		if (err)
+			goto unlock;
+	}
+	/* Success - update current profile */
+	dytc->current_profile = profile;
+unlock:
+	mutex_unlock(&dytc->mutex);
+	return err;
+}
+
+static void dytc_profile_refresh(struct ideapad_private *priv)
+{
+	enum platform_profile_option profile;
+	int output, err;
+	int perfmode;
+
+	mutex_lock(&priv->dytc->mutex);
+	err = dytc_cql_command(priv, DYTC_CMD_GET, &output);
+	mutex_unlock(&priv->dytc->mutex);
+	if (err)
+		return;
+
+	perfmode = (output >> DYTC_GET_MODE_BIT) & 0xF;
+	convert_dytc_to_profile(perfmode, &profile);
+	if (profile != priv->dytc->current_profile) {
+		priv->dytc->current_profile = profile;
+		platform_profile_notify();
+	}
+}
+
+static int ideapad_dytc_profile_init(struct ideapad_private *priv)
+{
+	int err, output, dytc_version;
+
+	err = method_dytc(priv->adev->handle, DYTC_CMD_QUERY, &output);
+	/* For all other errors we can flag the failure */
+	if (err)
+		return err;
+
+	/* Check DYTC is enabled and supports mode setting */
+	if (!(output & BIT(DYTC_QUERY_ENABLE_BIT)))
+		return -ENODEV;
+
+	dytc_version = (output >> DYTC_QUERY_REV_BIT) & 0xF;
+	if (dytc_version < 5)
+		return -ENODEV;
+
+	priv->dytc = kzalloc(sizeof(struct ideapad_dytc_priv), GFP_KERNEL);
+	if (!priv->dytc)
+		return -ENOMEM;
+
+	mutex_init(&priv->dytc->mutex);
+
+	priv->dytc->priv = priv;
+	priv->dytc->pprof.profile_get = dytc_profile_get;
+	priv->dytc->pprof.profile_set = dytc_profile_set;
+
+	/* Setup supported modes */
+	set_bit(PLATFORM_PROFILE_LOW_POWER, priv->dytc->pprof.choices);
+	set_bit(PLATFORM_PROFILE_BALANCED, priv->dytc->pprof.choices);
+	set_bit(PLATFORM_PROFILE_PERFORMANCE, priv->dytc->pprof.choices);
+
+	/* Create platform_profile structure and register */
+	err = platform_profile_register(&priv->dytc->pprof);
+	if (err)
+		goto mutex_destroy;
+
+	/* Ensure initial values are correct */
+	dytc_profile_refresh(priv);
+
+	return 0;
+
+mutex_destroy:
+	mutex_destroy(&priv->dytc->mutex);
+	kfree(priv->dytc);
+	priv->dytc = NULL;
+	return err;
+}
+
+static void ideapad_dytc_profile_exit(struct ideapad_private *priv)
+{
+	if (!priv->dytc)
+		return;
+
+	platform_profile_remove();
+	mutex_destroy(&priv->dytc->mutex);
+	kfree(priv->dytc);
+	priv->dytc = NULL;
+}
+
 /*
  * Rfkill
  */
@@ -1026,6 +1308,8 @@ static int ideapad_acpi_add(struct platform_device *pdev)
 	ideapad_sync_rfk_state(priv);
 	ideapad_sync_touchpad_state(priv);

+	ideapad_dytc_profile_init(priv);
+
 	if (acpi_video_get_backlight_type() == acpi_backlight_vendor) {
 		ret = ideapad_backlight_init(priv);
 		if (ret && ret != -ENODEV)
@@ -1079,6 +1363,7 @@ static int ideapad_acpi_remove(struct platform_device *pdev)
 	acpi_remove_notify_handler(priv->adev->handle,
 		ACPI_DEVICE_NOTIFY, ideapad_acpi_notify);
 	ideapad_backlight_exit(priv);
+	ideapad_dytc_profile_exit(priv);
 	for (i = 0; i < IDEAPAD_RFKILL_DEV_NUM; i++)
 		ideapad_unregister_rfkill(priv, i);
 	ideapad_input_exit(priv);
@@ -1100,6 +1385,10 @@ static int ideapad_acpi_resume(struct device *device)

 	ideapad_sync_rfk_state(priv);
 	ideapad_sync_touchpad_state(priv);
+
+	if (priv->dytc)
+		dytc_profile_refresh(priv);
+
 	return 0;
 }
 #endif
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index 9f8da7155a89..9ecf7829b3d8 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -66,6 +66,7 @@
 #include <linux/acpi.h>
 #include <linux/pci.h>
 #include <linux/power_supply.h>
+#include <linux/platform_profile.h>
 #include <sound/core.h>
 #include <sound/control.h>
 #include <sound/initval.h>
@@ -9850,6 +9851,11 @@ static struct ibm_struct lcdshadow_driver_data = {
  * Thinkpad sensor interfaces
  */

+#define DYTC_CMD_QUERY        0 /* To get DYTC status - enable/revision */
+#define DYTC_QUERY_ENABLE_BIT 8  /* Bit        8 - 0 = disabled, 1 = enabled */
+#define DYTC_QUERY_SUBREV_BIT 16 /* Bits 16 - 27 - sub revision */
+#define DYTC_QUERY_REV_BIT    28 /* Bits 28 - 31 - revision */
+
 #define DYTC_CMD_GET          2 /* To get current IC function and mode */
 #define DYTC_GET_LAPMODE_BIT 17 /* Set when in lapmode */

@@ -9860,17 +9866,56 @@ static bool has_palmsensor;
 static bool has_lapsensor;
 static bool palm_state;
 static bool lap_state;
+static int dytc_version;

-static int lapsensor_get(bool *present, bool *state)
+static int dytc_command(int command, int *output)
 {
 	acpi_handle dytc_handle;
-	int output;

-	*present = false;
-	if (ACPI_FAILURE(acpi_get_handle(hkey_handle, "DYTC", &dytc_handle)))
+	if (ACPI_FAILURE(acpi_get_handle(hkey_handle, "DYTC", &dytc_handle))) {
+		/* Platform doesn't support DYTC */
 		return -ENODEV;
-	if (!acpi_evalf(dytc_handle, &output, NULL, "dd", DYTC_CMD_GET))
+	}
+	if (!acpi_evalf(dytc_handle, output, NULL, "dd", command))
 		return -EIO;
+	return 0;
+}
+
+static int dytc_get_version(void)
+{
+	int err, output;
+
+	/* Check if we've been called before - and just return cached value */
+	if (dytc_version)
+		return dytc_version;
+
+	/* Otherwise query DYTC and extract version information */
+	err = dytc_command(DYTC_CMD_QUERY, &output);
+	/*
+	 * If support isn't available (ENODEV) then don't return an error
+	 * and don't create the sysfs group
+	 */
+	if (err == -ENODEV)
+		return 0;
+	/* For all other errors we can flag the failure */
+	if (err)
+		return err;
+
+	/* Check DYTC is enabled and supports mode setting */
+	if (output & BIT(DYTC_QUERY_ENABLE_BIT))
+		dytc_version = (output >> DYTC_QUERY_REV_BIT) & 0xF;
+
+	return 0;
+}
+
+static int lapsensor_get(bool *present, bool *state)
+{
+	int output, err;
+
+	*present = false;
+	err = dytc_command(DYTC_CMD_GET, &output);
+	if (err)
+		return err;

 	*present = true; /*If we get his far, we have lapmode support*/
 	*state = output & BIT(DYTC_GET_LAPMODE_BIT) ? true : false;
@@ -9968,7 +10013,18 @@ static int tpacpi_proxsensor_init(struct ibm_init_struct *iibm)
 		if (err)
 			return err;
 	}
-	if (has_lapsensor) {
+
+	/* Check if we know the DYTC version, if we don't then get it */
+	if (!dytc_version) {
+		err = dytc_get_version();
+		if (err)
+			return err;
+	}
+	/*
+	 * Platforms before DYTC version 5 claim to have a lap sensor, but it doesn't work, so we
+	 * ignore them
+	 */
+	if (has_lapsensor && (dytc_version >= 5)) {
 		err = sysfs_create_file(&tpacpi_pdev->dev.kobj, &dev_attr_dytc_lapmode.attr);
 		if (err)
 			return err;
@@ -9989,6 +10045,434 @@ static struct ibm_struct proxsensor_driver_data = {
 	.exit = proxsensor_exit,
 };

+/*************************************************************************
+ * DYTC Platform Profile interface
+ */
+
+#define DYTC_CMD_SET          1 /* To enable/disable IC function mode */
+#define DYTC_CMD_RESET    0x1ff /* To reset back to default */
+
+#define DYTC_GET_FUNCTION_BIT 8  /* Bits  8-11 - function setting */
+#define DYTC_GET_MODE_BIT     12 /* Bits 12-15 - mode setting */
+
+#define DYTC_SET_FUNCTION_BIT 12 /* Bits 12-15 - function setting */
+#define DYTC_SET_MODE_BIT     16 /* Bits 16-19 - mode setting */
+#define DYTC_SET_VALID_BIT    20 /* Bit     20 - 1 = on, 0 = off */
+
+#define DYTC_FUNCTION_STD     0  /* Function = 0, standard mode */
+#define DYTC_FUNCTION_CQL     1  /* Function = 1, lap mode */
+#define DYTC_FUNCTION_MMC     11 /* Function = 11, desk mode */
+
+#define DYTC_MODE_PERFORM     2  /* High power mode aka performance */
+#define DYTC_MODE_LOWPOWER    3  /* Low power mode */
+#define DYTC_MODE_BALANCE   0xF  /* Default mode aka balanced */
+
+#define DYTC_SET_COMMAND(function, mode, on) \
+	(DYTC_CMD_SET | (function) << DYTC_SET_FUNCTION_BIT | \
+	 (mode) << DYTC_SET_MODE_BIT | \
+	 (on) << DYTC_SET_VALID_BIT)
+
+#define DYTC_DISABLE_CQL DYTC_SET_COMMAND(DYTC_FUNCTION_CQL, DYTC_MODE_BALANCE, 0)
+
+#define DYTC_ENABLE_CQL DYTC_SET_COMMAND(DYTC_FUNCTION_CQL, DYTC_MODE_BALANCE, 1)
+
+static bool dytc_profile_available;
+static enum platform_profile_option dytc_current_profile;
+static atomic_t dytc_ignore_event = ATOMIC_INIT(0);
+static DEFINE_MUTEX(dytc_mutex);
+
+static int convert_dytc_to_profile(int dytcmode, enum platform_profile_option *profile)
+{
+	switch (dytcmode) {
+	case DYTC_MODE_LOWPOWER:
+		*profile = PLATFORM_PROFILE_LOW_POWER;
+		break;
+	case DYTC_MODE_BALANCE:
+		*profile =  PLATFORM_PROFILE_BALANCED;
+		break;
+	case DYTC_MODE_PERFORM:
+		*profile =  PLATFORM_PROFILE_PERFORMANCE;
+		break;
+	default: /* Unknown mode */
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int convert_profile_to_dytc(enum platform_profile_option profile, int *perfmode)
+{
+	switch (profile) {
+	case PLATFORM_PROFILE_LOW_POWER:
+		*perfmode = DYTC_MODE_LOWPOWER;
+		break;
+	case PLATFORM_PROFILE_BALANCED:
+		*perfmode = DYTC_MODE_BALANCE;
+		break;
+	case PLATFORM_PROFILE_PERFORMANCE:
+		*perfmode = DYTC_MODE_PERFORM;
+		break;
+	default: /* Unknown profile */
+		return -EOPNOTSUPP;
+	}
+	return 0;
+}
+
+/*
+ * dytc_profile_get: Function to register with platform_profile
+ * handler. Returns current platform profile.
+ */
+int dytc_profile_get(struct platform_profile_handler *pprof,
+			enum platform_profile_option *profile)
+{
+	*profile = dytc_current_profile;
+	return 0;
+}
+
+/*
+ * Helper function - check if we are in CQL mode and if we are
+ *  -  disable CQL,
+ *  - run the command
+ *  - enable CQL
+ *  If not in CQL mode, just run the command
+ */
+int dytc_cql_command(int command, int *output)
+{
+	int err, cmd_err, dummy;
+	int cur_funcmode;
+
+	/* Determine if we are in CQL mode. This alters the commands we do */
+	err = dytc_command(DYTC_CMD_GET, output);
+	if (err)
+		return err;
+
+	cur_funcmode = (*output >> DYTC_GET_FUNCTION_BIT) & 0xF;
+	/* Check if we're OK to return immediately */
+	if ((command == DYTC_CMD_GET) && (cur_funcmode != DYTC_FUNCTION_CQL))
+		return 0;
+
+	if (cur_funcmode == DYTC_FUNCTION_CQL) {
+		atomic_inc(&dytc_ignore_event);
+		err = dytc_command(DYTC_DISABLE_CQL, &dummy);
+		if (err)
+			return err;
+	}
+
+	cmd_err = dytc_command(command,	output);
+	/* Check return condition after we've restored CQL state */
+
+	if (cur_funcmode == DYTC_FUNCTION_CQL) {
+		err = dytc_command(DYTC_ENABLE_CQL, &dummy);
+		if (err)
+			return err;
+	}
+
+	return cmd_err;
+}
+
+/*
+ * dytc_profile_set: Function to register with platform_profile
+ * handler. Sets current platform profile.
+ */
+int dytc_profile_set(struct platform_profile_handler *pprof,
+			enum platform_profile_option profile)
+{
+	int output;
+	int err;
+
+	if (!dytc_profile_available)
+		return -ENODEV;
+
+	err = mutex_lock_interruptible(&dytc_mutex);
+	if (err)
+		return err;
+
+	if (profile == PLATFORM_PROFILE_BALANCED) {
+		/*
+		 * To get back to balanced mode we need to issue a reset command.
+		 * Note we still need to disable CQL mode before hand and re-enable
+		 * it afterwards, otherwise dytc_lapmode gets reset to 0 and stays
+		 * stuck at 0 for aprox. 30 minutes.
+		 */
+		err = dytc_cql_command(DYTC_CMD_RESET, &output);
+		if (err)
+			goto unlock;
+	} else {
+		int perfmode;
+
+		err = convert_profile_to_dytc(profile, &perfmode);
+		if (err)
+			goto unlock;
+
+		/* Determine if we are in CQL mode. This alters the commands we do */
+		err = dytc_cql_command(DYTC_SET_COMMAND(DYTC_FUNCTION_MMC, perfmode, 1), &output);
+		if (err)
+			goto unlock;
+	}
+	/* Success - update current profile */
+	dytc_current_profile = profile;
+unlock:
+	mutex_unlock(&dytc_mutex);
+	return err;
+}
+
+static void dytc_profile_refresh(void)
+{
+	enum platform_profile_option profile;
+	int output, err;
+	int perfmode;
+
+	mutex_lock(&dytc_mutex);
+	err = dytc_cql_command(DYTC_CMD_GET, &output);
+	mutex_unlock(&dytc_mutex);
+	if (err)
+		return;
+
+	perfmode = (output >> DYTC_GET_MODE_BIT) & 0xF;
+	convert_dytc_to_profile(perfmode, &profile);
+	if (profile != dytc_current_profile) {
+		dytc_current_profile = profile;
+		platform_profile_notify();
+	}
+}
+
+static struct platform_profile_handler dytc_profile = {
+	.profile_get = dytc_profile_get,
+	.profile_set = dytc_profile_set,
+};
+
+static int tpacpi_dytc_profile_init(struct ibm_init_struct *iibm)
+{
+	int err, output;
+
+	/* Setup supported modes */
+	set_bit(PLATFORM_PROFILE_LOW_POWER, dytc_profile.choices);
+	set_bit(PLATFORM_PROFILE_BALANCED, dytc_profile.choices);
+	set_bit(PLATFORM_PROFILE_PERFORMANCE, dytc_profile.choices);
+
+	dytc_profile_available = false;
+	err = dytc_command(DYTC_CMD_QUERY, &output);
+	/*
+	 * If support isn't available (ENODEV) then don't return an error
+	 * and don't create the sysfs group
+	 */
+	if (err == -ENODEV)
+		return 0;
+	/* For all other errors we can flag the failure */
+	if (err)
+		return err;
+
+	/* Check if we know the DYTC version, if we don't then get it */
+	if (!dytc_version) {
+		err = dytc_get_version();
+		if (err)
+			return err;
+	}
+	/* Check DYTC is enabled and supports mode setting */
+	if (dytc_version >= 5) {
+		dbg_printk(TPACPI_DBG_INIT,
+				"DYTC version %d: thermal mode available\n", dytc_version);
+		/* Create platform_profile structure and register */
+		err = platform_profile_register(&dytc_profile);
+		/*
+		 * If for some reason platform_profiles aren't enabled
+		 * don't quit terminally.
+		 */
+		if (err)
+			return 0;
+
+		dytc_profile_available = true;
+		/* Ensure initial values are correct */
+		dytc_profile_refresh();
+	}
+	return 0;
+}
+
+static void dytc_profile_exit(void)
+{
+	if (dytc_profile_available) {
+		dytc_profile_available = false;
+		platform_profile_remove();
+	}
+}
+
+static struct ibm_struct  dytc_profile_driver_data = {
+	.name = "dytc-profile",
+	.exit = dytc_profile_exit,
+};
+
+/*************************************************************************
+ * Keyboard language interface
+ */
+
+struct keyboard_lang_data {
+	const char *lang_str;
+	int lang_code;
+};
+
+static const struct keyboard_lang_data keyboard_lang_data[] = {
+	{"be", 0x080c},
+	{"cz", 0x0405},
+	{"da", 0x0406},
+	{"de", 0x0c07},
+	{"en", 0x0000},
+	{"es", 0x2c0a},
+	{"et", 0x0425},
+	{"fr", 0x040c},
+	{"fr-ch", 0x100c},
+	{"hu", 0x040e},
+	{"it", 0x0410},
+	{"jp", 0x0411},
+	{"nl", 0x0413},
+	{"nn", 0x0414},
+	{"pl", 0x0415},
+	{"pt", 0x0816},
+	{"sl", 0x041b},
+	{"sv", 0x081d},
+	{"tr", 0x041f},
+};
+
+static int set_keyboard_lang_command(int command)
+{
+	acpi_handle sskl_handle;
+	int output;
+
+	if (ACPI_FAILURE(acpi_get_handle(hkey_handle, "SSKL", &sskl_handle))) {
+		/* Platform doesn't support SSKL */
+		return -ENODEV;
+	}
+
+	if (!acpi_evalf(sskl_handle, &output, NULL, "dd", command))
+		return -EIO;
+
+	return 0;
+}
+
+static int get_keyboard_lang(int *output)
+{
+	acpi_handle gskl_handle;
+	int kbd_lang;
+
+	if (ACPI_FAILURE(acpi_get_handle(hkey_handle, "GSKL", &gskl_handle))) {
+		/* Platform doesn't support GSKL */
+		return -ENODEV;
+	}
+
+	if (!acpi_evalf(gskl_handle, &kbd_lang, NULL, "dd", 0x02000000))
+		return -EIO;
+
+	/*
+	 * METHOD_ERR gets returned on devices where there are no special (e.g. '=',
+	 * '(' and ')') keys which use layout dependent key-press emulation.
+	 */
+	if (kbd_lang & METHOD_ERR)
+		return -ENODEV;
+
+	*output = kbd_lang;
+
+	return 0;
+}
+
+/* sysfs keyboard language entry */
+static ssize_t keyboard_lang_show(struct device *dev,
+				struct device_attribute *attr,
+				char *buf)
+{
+	int output, err, i, len = 0;
+
+	err = get_keyboard_lang(&output);
+	if (err)
+		return err;
+
+	for (i = 0; i < ARRAY_SIZE(keyboard_lang_data); i++) {
+		if (i)
+			len += sysfs_emit_at(buf, len, "%s", " ");
+
+		if (output == keyboard_lang_data[i].lang_code) {
+			len += sysfs_emit_at(buf, len, "[%s]", keyboard_lang_data[i].lang_str);
+		} else {
+			len += sysfs_emit_at(buf, len, "%s", keyboard_lang_data[i].lang_str);
+		}
+	}
+	len += sysfs_emit_at(buf, len, "\n");
+
+	return len;
+}
+
+static ssize_t keyboard_lang_store(struct device *dev,
+				struct device_attribute *attr,
+				const char *buf, size_t count)
+{
+	int err, i;
+	bool lang_found = false;
+	int lang_code = 0;
+
+	for (i = 0; i < ARRAY_SIZE(keyboard_lang_data); i++) {
+		if (sysfs_streq(buf, keyboard_lang_data[i].lang_str)) {
+			lang_code = keyboard_lang_data[i].lang_code;
+			lang_found = true;
+			break;
+		}
+	}
+
+	if (lang_found) {
+		lang_code = lang_code | 1 << 24;
+
+		/* Set language code */
+		err = set_keyboard_lang_command(lang_code);
+		if (err)
+			return err;
+	} else {
+		dev_err(&tpacpi_pdev->dev, "Unknown Keyboard language. Ignoring\n");
+		return -EINVAL;
+	}
+
+	tpacpi_disclose_usertask(attr->attr.name,
+			"keyboard language is set to  %s\n", buf);
+
+	sysfs_notify(&tpacpi_pdev->dev.kobj, NULL, "keyboard_lang");
+
+	return count;
+}
+static DEVICE_ATTR_RW(keyboard_lang);
+
+static struct attribute *kbdlang_attributes[] = {
+	&dev_attr_keyboard_lang.attr,
+	NULL
+};
+
+static const struct attribute_group kbdlang_attr_group = {
+	.attrs = kbdlang_attributes,
+};
+
+static int tpacpi_kbdlang_init(struct ibm_init_struct *iibm)
+{
+	int err, output;
+
+	err = get_keyboard_lang(&output);
+	/*
+	 * If support isn't available (ENODEV) then don't return an error
+	 * just don't create the sysfs group.
+	 */
+	if (err == -ENODEV)
+		return 0;
+
+	if (err)
+		return err;
+
+	/* Platform supports this feature - create the sysfs file */
+	return sysfs_create_group(&tpacpi_pdev->dev.kobj, &kbdlang_attr_group);
+}
+
+static void kbdlang_exit(void)
+{
+	sysfs_remove_group(&tpacpi_pdev->dev.kobj, &kbdlang_attr_group);
+}
+
+static struct ibm_struct kbdlang_driver_data = {
+	.name = "kbdlang",
+	.exit = kbdlang_exit,
+};
+
 /****************************************************************************
  ****************************************************************************
  *
@@ -10037,8 +10521,12 @@ static void tpacpi_driver_event(const unsigned int hkey_event)
 		mutex_unlock(&kbdlight_mutex);
 	}

-	if (hkey_event == TP_HKEY_EV_THM_CSM_COMPLETED)
+	if (hkey_event == TP_HKEY_EV_THM_CSM_COMPLETED) {
 		lapsensor_refresh();
+		/* If we are already accessing DYTC then skip dytc update */
+		if (!atomic_add_unless(&dytc_ignore_event, -1, 0))
+			dytc_profile_refresh();
+	}
 }

 static void hotkey_driver_event(const unsigned int scancode)
@@ -10481,6 +10969,14 @@ static struct ibm_init_struct ibms_init[] __initdata = {
 		.init = tpacpi_proxsensor_init,
 		.data = &proxsensor_driver_data,
 	},
+	{
+		.init = tpacpi_dytc_profile_init,
+		.data = &dytc_profile_driver_data,
+	},
+	{
+		.init = tpacpi_kbdlang_init,
+		.data = &kbdlang_driver_data,
+	},
 };

 static int __init set_ibm_param(const char *val, const struct kernel_param *kp)
diff --git a/drivers/scsi/smartpqi/smartpqi_init.c b/drivers/scsi/smartpqi/smartpqi_init.c
index c53f456fbd09..ea190660c86e 100644
--- a/drivers/scsi/smartpqi/smartpqi_init.c
+++ b/drivers/scsi/smartpqi/smartpqi_init.c
@@ -8313,6 +8313,18 @@ static const struct pci_device_id pqi_pci_id_table[] = {
 		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
 			       0x19e5, 0xd22c)
 	},
+	{
+		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+			       0x1bd4, 0x004a)
+	},
+	{
+		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+			       0x1bd4, 0x004b)
+	},
+	{
+		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+			       0x1bd4, 0x004c)
+	},
 	{
 		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
 			       PCI_VENDOR_ID_ADAPTEC2, 0x0110)
@@ -8453,6 +8465,10 @@ static const struct pci_device_id pqi_pci_id_table[] = {
 		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
 			       PCI_VENDOR_ID_ADVANTECH, 0x8312)
 	},
+	{
+		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+			       PCI_VENDOR_ID_ADVANTECH, 0x8312)
+	},
 	{
 		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
 			       PCI_VENDOR_ID_DELL, 0x1fe0)
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 7f71218cc1e5..283fc0f41cd2 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -5532,6 +5532,13 @@ static void hub_event(struct work_struct *work)
 			(u16) hub->change_bits[0],
 			(u16) hub->event_bits[0]);

+	/* Don't disconnect USB-SATA on TrimSlice */
+	if (strcmp(dev_name(hdev->bus->controller), "tegra-ehci.0") == 0) {
+		if ((hdev->state == 7) && (hub->change_bits[0] == 0) &&
+				(hub->event_bits[0] == 0x2))
+			hub->event_bits[0] = 0;
+	}
+
 	/* Lock the device, then check to see if we were
 	 * disconnected while waiting for the lock to succeed. */
 	usb_lock_device(hdev);
diff --git a/include/linux/efi.h b/include/linux/efi.h
index 119262585e9b..7d67f0187c34 100644
--- a/include/linux/efi.h
+++ b/include/linux/efi.h
@@ -43,6 +43,8 @@
 #define EFI_ABORTED		(21 | (1UL << (BITS_PER_LONG-1)))
 #define EFI_SECURITY_VIOLATION	(26 | (1UL << (BITS_PER_LONG-1)))

+#define EFI_IS_ERROR(x)		((x) & (1UL << (BITS_PER_LONG-1)))
+
 typedef unsigned long efi_status_t;
 typedef u8 efi_bool_t;
 typedef u16 efi_char16_t;		/* UNICODE character */
@@ -788,6 +790,14 @@ extern int __init efi_setup_pcdp_console(char *);
 #define EFI_MEM_ATTR		10	/* Did firmware publish an EFI_MEMORY_ATTRIBUTES table? */
 #define EFI_MEM_NO_SOFT_RESERVE	11	/* Is the kernel configured to ignore soft reservations? */
 #define EFI_PRESERVE_BS_REGIONS	12	/* Are EFI boot-services memory segments available? */
+#define EFI_SECURE_BOOT		13	/* Are we in Secure Boot mode? */
+
+enum efi_secureboot_mode {
+	efi_secureboot_mode_unset,
+	efi_secureboot_mode_unknown,
+	efi_secureboot_mode_disabled,
+	efi_secureboot_mode_enabled,
+};

 #ifdef CONFIG_EFI
 /*
@@ -799,6 +809,8 @@ static inline bool efi_enabled(int feature)
 }
 extern void efi_reboot(enum reboot_mode reboot_mode, const char *__unused);

+extern void __init efi_set_secure_boot(enum efi_secureboot_mode mode);
+
 bool __pure __efi_soft_reserve_enabled(void);

 static inline bool __pure efi_soft_reserve_enabled(void)
@@ -819,6 +831,8 @@ static inline bool efi_enabled(int feature)
 static inline void
 efi_reboot(enum reboot_mode reboot_mode, const char *__unused) {}

+static inline void efi_set_secure_boot(enum efi_secureboot_mode mode) {}
+
 static inline bool efi_soft_reserve_enabled(void)
 {
 	return false;
@@ -831,6 +845,7 @@ static inline bool efi_rt_services_supported(unsigned int mask)
 #endif

 extern int efi_status_to_err(efi_status_t status);
+extern const char *efi_status_to_str(efi_status_t status);

 /*
  * Variable Attributes
@@ -1083,13 +1098,6 @@ static inline bool efi_runtime_disabled(void) { return true; }
 extern void efi_call_virt_check_flags(unsigned long flags, const char *call);
 extern unsigned long efi_call_virt_save_flags(void);

-enum efi_secureboot_mode {
-	efi_secureboot_mode_unset,
-	efi_secureboot_mode_unknown,
-	efi_secureboot_mode_disabled,
-	efi_secureboot_mode_enabled,
-};
-
 static inline
 enum efi_secureboot_mode efi_get_secureboot_mode(efi_get_variable_t *get_var)
 {
diff --git a/include/linux/lsm_hook_defs.h b/include/linux/lsm_hook_defs.h
index 7aaa753b8608..8e164db118c3 100644
--- a/include/linux/lsm_hook_defs.h
+++ b/include/linux/lsm_hook_defs.h
@@ -385,6 +385,8 @@ LSM_HOOK(void, LSM_RET_VOID, bpf_prog_free_security, struct bpf_prog_aux *aux)
 #endif /* CONFIG_BPF_SYSCALL */

 LSM_HOOK(int, 0, locked_down, enum lockdown_reason what)
+LSM_HOOK(int, 0, lock_kernel_down, const char *where, enum lockdown_reason level)
+

 #ifdef CONFIG_PERF_EVENTS
 LSM_HOOK(int, 0, perf_event_open, struct perf_event_attr *attr, int type)
diff --git a/include/linux/lsm_hooks.h b/include/linux/lsm_hooks.h
index a19adef1f088..57cce0d5c347 100644
--- a/include/linux/lsm_hooks.h
+++ b/include/linux/lsm_hooks.h
@@ -1520,6 +1520,12 @@
  *
  *     @what: kernel feature being accessed
  *
+ * @lock_kernel_down
+ * 	Put the kernel into lock-down mode.
+ *
+ * 	@where: Where the lock-down is originating from (e.g. command line option)
+ * 	@level: The lock-down level (can only increase)
+ *
  * Security hooks for perf events
  *
  * @perf_event_open:
diff --git a/include/linux/pci-ecam.h b/include/linux/pci-ecam.h
index 65d3d83015c3..fbdadd4d8377 100644
--- a/include/linux/pci-ecam.h
+++ b/include/linux/pci-ecam.h
@@ -85,6 +85,7 @@ extern const struct pci_ecam_ops pci_thunder_ecam_ops; /* Cavium ThunderX 1.x */
 extern const struct pci_ecam_ops xgene_v1_pcie_ecam_ops; /* APM X-Gene PCIe v1 */
 extern const struct pci_ecam_ops xgene_v2_pcie_ecam_ops; /* APM X-Gene PCIe v2.x */
 extern const struct pci_ecam_ops al_pcie_ops;	/* Amazon Annapurna Labs PCIe */
+extern const struct pci_ecam_ops tegra194_pcie_ops; /* Tegra194 PCIe */
 #endif

 #if IS_ENABLED(CONFIG_PCI_HOST_COMMON)
diff --git a/include/linux/platform_profile.h b/include/linux/platform_profile.h
new file mode 100644
index 000000000000..a26542d53058
--- /dev/null
+++ b/include/linux/platform_profile.h
@@ -0,0 +1,41 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Platform profile sysfs interface
+ *
+ * See Documentation/ABI/testing/sysfs-platform_profile.rst for more
+ * information.
+ */
+
+#ifndef _PLATFORM_PROFILE_H_
+#define _PLATFORM_PROFILE_H_
+
+#include <linux/bitops.h>
+
+/*
+ * If more options are added please update profile_names
+ * array in platform-profile.c and sysfs-platform-profile.rst
+ * documentation.
+ */
+
+enum platform_profile_option {
+	PLATFORM_PROFILE_LOW_POWER,
+	PLATFORM_PROFILE_COOL,
+	PLATFORM_PROFILE_QUIET,
+	PLATFORM_PROFILE_BALANCED,
+	PLATFORM_PROFILE_PERFORMANCE,
+	PLATFORM_PROFILE_LAST, /*must always be last */
+};
+
+struct platform_profile_handler {
+	unsigned long choices[BITS_TO_LONGS(PLATFORM_PROFILE_LAST)];
+	int (*profile_get)(struct platform_profile_handler *pprof,
+				enum platform_profile_option *profile);
+	int (*profile_set)(struct platform_profile_handler *pprof,
+				enum platform_profile_option profile);
+};
+
+int platform_profile_register(struct platform_profile_handler *pprof);
+int platform_profile_remove(void);
+void platform_profile_notify(void);
+
+#endif  /*_PLATFORM_PROFILE_H_*/
diff --git a/include/linux/rmi.h b/include/linux/rmi.h
index ab7eea01ab42..fff7c5f737fc 100644
--- a/include/linux/rmi.h
+++ b/include/linux/rmi.h
@@ -364,6 +364,7 @@ struct rmi_driver_data {

 	struct rmi4_attn_data attn_data;
 	DECLARE_KFIFO(attn_fifo, struct rmi4_attn_data, 16);
+	struct work_struct attn_work;
 };

 int rmi_register_transport_device(struct rmi_transport_dev *xport);
diff --git a/include/linux/security.h b/include/linux/security.h
index c35ea0ffccd9..342d4579bf5c 100644
--- a/include/linux/security.h
+++ b/include/linux/security.h
@@ -457,6 +457,7 @@ int security_inode_notifysecctx(struct inode *inode, void *ctx, u32 ctxlen);
 int security_inode_setsecctx(struct dentry *dentry, void *ctx, u32 ctxlen);
 int security_inode_getsecctx(struct inode *inode, void **ctx, u32 *ctxlen);
 int security_locked_down(enum lockdown_reason what);
+int security_lock_kernel_down(const char *where, enum lockdown_reason level);
 #else /* CONFIG_SECURITY */

 static inline int call_blocking_lsm_notifier(enum lsm_event event, void *data)
@@ -1305,6 +1306,10 @@ static inline int security_locked_down(enum lockdown_reason what)
 {
 	return 0;
 }
+static inline int security_lock_kernel_down(const char *where, enum lockdown_reason level)
+{
+	return 0;
+}
 #endif	/* CONFIG_SECURITY */

 #if defined(CONFIG_SECURITY) && defined(CONFIG_WATCH_QUEUE)
diff --git a/kernel/crash_core.c b/kernel/crash_core.c
index 825284baaf46..0b2b3f510b16 100644
--- a/kernel/crash_core.c
+++ b/kernel/crash_core.c
@@ -7,6 +7,7 @@
 #include <linux/crash_core.h>
 #include <linux/utsname.h>
 #include <linux/vmalloc.h>
+#include <linux/sizes.h>

 #include <asm/page.h>
 #include <asm/sections.h>
@@ -41,6 +42,15 @@ static int __init parse_crashkernel_mem(char *cmdline,
 					unsigned long long *crash_base)
 {
 	char *cur = cmdline, *tmp;
+	unsigned long long total_mem = system_ram;
+
+	/*
+	 * Firmware sometimes reserves some memory regions for it's own use.
+	 * so we get less than actual system memory size.
+	 * Workaround this by round up the total size to 128M which is
+	 * enough for most test cases.
+	 */
+	total_mem = roundup(total_mem, SZ_128M);

 	/* for each entry of the comma-separated list */
 	do {
@@ -85,13 +95,13 @@ static int __init parse_crashkernel_mem(char *cmdline,
 			return -EINVAL;
 		}
 		cur = tmp;
-		if (size >= system_ram) {
+		if (size >= total_mem) {
 			pr_warn("crashkernel: invalid size\n");
 			return -EINVAL;
 		}

 		/* match ? */
-		if (system_ram >= start && system_ram < end) {
+		if (total_mem >= start && total_mem < end) {
 			*crash_size = size;
 			break;
 		}
@@ -250,6 +260,20 @@ static int __init __parse_crashkernel(char *cmdline,
 	if (suffix)
 		return parse_crashkernel_suffix(ck_cmdline, crash_size,
 				suffix);
+
+	if (strncmp(ck_cmdline, "auto", 4) == 0) {
+#ifdef CONFIG_X86_64
+		ck_cmdline = "1G-64G:160M,64G-1T:256M,1T-:512M";
+#elif defined(CONFIG_S390)
+		ck_cmdline = "4G-64G:160M,64G-1T:256M,1T-:512M";
+#elif defined(CONFIG_ARM64)
+		ck_cmdline = "2G-:512M";
+#elif defined(CONFIG_PPC64)
+		ck_cmdline = "2G-4G:384M,4G-16G:512M,16G-64G:1G,64G-128G:2G,128G-:4G";
+#endif
+		pr_info("Using crashkernel=auto, the size chosen is a best effort estimation.\n");
+	}
+
 	/*
 	 * if the commandline contains a ':', then that's the extended
 	 * syntax -- if not, it must be the classic syntax
diff --git a/kernel/module_signing.c b/kernel/module_signing.c
index 8723ae70ea1f..fb2d773498c2 100644
--- a/kernel/module_signing.c
+++ b/kernel/module_signing.c
@@ -38,8 +38,15 @@ int mod_verify_sig(const void *mod, struct load_info *info)
 	modlen -= sig_len + sizeof(ms);
 	info->len = modlen;

-	return verify_pkcs7_signature(mod, modlen, mod + modlen, sig_len,
+	ret = verify_pkcs7_signature(mod, modlen, mod + modlen, sig_len,
 				      VERIFY_USE_SECONDARY_KEYRING,
 				      VERIFYING_MODULE_SIGNATURE,
 				      NULL, NULL);
+	if (ret == -ENOKEY && IS_ENABLED(CONFIG_INTEGRITY_PLATFORM_KEYRING)) {
+		ret = verify_pkcs7_signature(mod, modlen, mod + modlen, sig_len,
+				VERIFY_USE_PLATFORM_KEYRING,
+				VERIFYING_MODULE_SIGNATURE,
+				NULL, NULL);
+	}
+	return ret;
 }
diff --git a/mm/kmemleak.c b/mm/kmemleak.c
index c0014d3b91c1..c00e9820412a 100644
--- a/mm/kmemleak.c
+++ b/mm/kmemleak.c
@@ -1960,6 +1960,11 @@ void __init kmemleak_init(void)
  */
 static int __init kmemleak_late_init(void)
 {
+	if (!kmemleak_skip_disable) {
+		kmemleak_disable();
+		return 0;
+	}
+
 	kmemleak_initialized = 1;

 	debugfs_create_file("kmemleak", 0644, NULL, NULL, &kmemleak_fops);
diff --git a/security/integrity/platform_certs/load_uefi.c b/security/integrity/platform_certs/load_uefi.c
index ee4b4c666854..eff9ff593405 100644
--- a/security/integrity/platform_certs/load_uefi.c
+++ b/security/integrity/platform_certs/load_uefi.c
@@ -46,7 +46,8 @@ static __init void *get_cert_list(efi_char16_t *name, efi_guid_t *guid,
 		return NULL;

 	if (*status != EFI_BUFFER_TOO_SMALL) {
-		pr_err("Couldn't get size: 0x%lx\n", *status);
+		pr_err("Couldn't get size: %s (0x%lx)\n",
+		       efi_status_to_str(*status), *status);
 		return NULL;
 	}

@@ -57,7 +58,8 @@ static __init void *get_cert_list(efi_char16_t *name, efi_guid_t *guid,
 	*status = efi.get_variable(name, guid, NULL, &lsize, db);
 	if (*status != EFI_SUCCESS) {
 		kfree(db);
-		pr_err("Error reading db var: 0x%lx\n", *status);
+		pr_err("Error reading db var: %s (0x%lx)\n",
+		       efi_status_to_str(*status), *status);
 		return NULL;
 	}

diff --git a/security/lockdown/Kconfig b/security/lockdown/Kconfig
index e84ddf484010..d0501353a4b9 100644
--- a/security/lockdown/Kconfig
+++ b/security/lockdown/Kconfig
@@ -16,6 +16,19 @@ config SECURITY_LOCKDOWN_LSM_EARLY
 	  subsystem is fully initialised. If enabled, lockdown will
 	  unconditionally be called before any other LSMs.

+config LOCK_DOWN_IN_EFI_SECURE_BOOT
+	bool "Lock down the kernel in EFI Secure Boot mode"
+	default n
+	depends on EFI && SECURITY_LOCKDOWN_LSM_EARLY
+	help
+	  UEFI Secure Boot provides a mechanism for ensuring that the firmware
+	  will only load signed bootloaders and kernels.  Secure boot mode may
+	  be determined from EFI variables provided by the system firmware if
+	  not indicated by the boot parameters.
+
+	  Enabling this option results in kernel lockdown being triggered if
+	  EFI Secure Boot is set.
+
 choice
 	prompt "Kernel default lockdown mode"
 	default LOCK_DOWN_KERNEL_FORCE_NONE
diff --git a/security/lockdown/lockdown.c b/security/lockdown/lockdown.c
index 87cbdc64d272..18555cf18da7 100644
--- a/security/lockdown/lockdown.c
+++ b/security/lockdown/lockdown.c
@@ -73,6 +73,7 @@ static int lockdown_is_locked_down(enum lockdown_reason what)

 static struct security_hook_list lockdown_hooks[] __lsm_ro_after_init = {
 	LSM_HOOK_INIT(locked_down, lockdown_is_locked_down),
+	LSM_HOOK_INIT(lock_kernel_down, lock_kernel_down),
 };

 static int __init lockdown_lsm_init(void)
diff --git a/security/security.c b/security/security.c
index 7b09cfbae94f..e1c7bda4de13 100644
--- a/security/security.c
+++ b/security/security.c
@@ -2534,6 +2534,12 @@ int security_locked_down(enum lockdown_reason what)
 }
 EXPORT_SYMBOL(security_locked_down);

+int security_lock_kernel_down(const char *where, enum lockdown_reason level)
+{
+	return call_int_hook(lock_kernel_down, 0, where, level);
+}
+EXPORT_SYMBOL(security_lock_kernel_down);
+
 #ifdef CONFIG_PERF_EVENTS
 int security_perf_event_open(struct perf_event_attr *attr, int type)
 {
diff --git a/sound/hda/Kconfig b/sound/hda/Kconfig
index 3bc9224d5e4f..9ed5cfa3c18c 100644
--- a/sound/hda/Kconfig
+++ b/sound/hda/Kconfig
@@ -46,3 +46,17 @@ config SND_INTEL_DSP_CONFIG
 	select SND_INTEL_NHLT if ACPI
 	# this config should be selected only for Intel DSP platforms.
 	# A fallback is provided so that the code compiles in all cases.
+
+config SND_INTEL_BYT_PREFER_SOF
+	bool "Prefer SOF driver over SST on BY/CHT platforms"
+	depends on SND_SST_ATOM_HIFI2_PLATFORM_ACPI && SND_SOC_SOF_BAYTRAIL
+	default n
+	help
+	  The kernel has 2 drivers for the Low Power Engine audio-block on
+	  Bay- and Cherry-Trail SoCs. The old SST driver and the new SOF
+	  driver. If both drivers are enabled then the kernel will default
+	  to using the old SST driver, unless told otherwise through the
+	  snd_intel_dspcfg.dsp_driver module-parameter.
+
+	  Set this option to Y to make the kernel default to the new SOF
+	  driver instead.
diff --git a/sound/hda/intel-dsp-config.c b/sound/hda/intel-dsp-config.c
index c45686172517..68bb977c6a37 100644
--- a/sound/hda/intel-dsp-config.c
+++ b/sound/hda/intel-dsp-config.c
@@ -452,35 +452,30 @@ int snd_intel_dsp_driver_probe(struct pci_dev *pci)
 }
 EXPORT_SYMBOL_GPL(snd_intel_dsp_driver_probe);

+/* Should we default to SOF or SST for BYT/CHT ? */
+#if IS_ENABLED(CONFIG_SND_INTEL_BYT_PREFER_SOF) || \
+    !IS_ENABLED(CONFIG_SND_SST_ATOM_HIFI2_PLATFORM_ACPI)
+#define FLAG_SST_OR_SOF_BYT	FLAG_SOF
+#else
+#define FLAG_SST_OR_SOF_BYT	FLAG_SST
+#endif
+
 /*
  * configuration table
  * - the order of similar ACPI ID entries is important!
  * - the first successful match will win
  */
 static const struct config_entry acpi_config_table[] = {
+#if IS_ENABLED(CONFIG_SND_SST_ATOM_HIFI2_PLATFORM_ACPI) || \
+    IS_ENABLED(CONFIG_SND_SOC_SOF_BAYTRAIL)
 /* BayTrail */
-#if IS_ENABLED(CONFIG_SND_SST_ATOM_HIFI2_PLATFORM_ACPI)
-	{
-		.flags = FLAG_SST,
-		.acpi_hid = "80860F28",
-	},
-#endif
-#if IS_ENABLED(CONFIG_SND_SOC_SOF_BAYTRAIL)
 	{
-		.flags = FLAG_SOF,
+		.flags = FLAG_SST_OR_SOF_BYT,
 		.acpi_hid = "80860F28",
 	},
-#endif
 /* CherryTrail */
-#if IS_ENABLED(CONFIG_SND_SST_ATOM_HIFI2_PLATFORM_ACPI)
-	{
-		.flags = FLAG_SST,
-		.acpi_hid = "808622A8",
-	},
-#endif
-#if IS_ENABLED(CONFIG_SND_SOC_SOF_BAYTRAIL)
 	{
-		.flags = FLAG_SOF,
+		.flags = FLAG_SST_OR_SOF_BYT,
 		.acpi_hid = "808622A8",
 	},
 #endif
diff --git a/sound/soc/sof/intel/apl.c b/sound/soc/sof/intel/apl.c
index fc29b91b8932..c7ed2b3d6abc 100644
--- a/sound/soc/sof/intel/apl.c
+++ b/sound/soc/sof/intel/apl.c
@@ -27,9 +27,10 @@ static const struct snd_sof_debugfs_map apl_dsp_debugfs[] = {

 /* apollolake ops */
 const struct snd_sof_dsp_ops sof_apl_ops = {
-	/* probe and remove */
+	/* probe/remove/shutdown */
 	.probe		= hda_dsp_probe,
 	.remove		= hda_dsp_remove,
+	.shutdown	= hda_dsp_shutdown,

 	/* Register IO */
 	.write		= sof_io_write,
diff --git a/sound/soc/sof/intel/cnl.c b/sound/soc/sof/intel/cnl.c
index e38db519f38d..094cde17a1b7 100644
--- a/sound/soc/sof/intel/cnl.c
+++ b/sound/soc/sof/intel/cnl.c
@@ -232,9 +232,10 @@ void cnl_ipc_dump(struct snd_sof_dev *sdev)

 /* cannonlake ops */
 const struct snd_sof_dsp_ops sof_cnl_ops = {
-	/* probe and remove */
+	/* probe/remove/shutdown */
 	.probe		= hda_dsp_probe,
 	.remove		= hda_dsp_remove,
+	.shutdown	= hda_dsp_shutdown,

 	/* Register IO */
 	.write		= sof_io_write,
diff --git a/sound/soc/sof/intel/hda-dsp.c b/sound/soc/sof/intel/hda-dsp.c
index ea8e7ad8684d..d87cc16d53f6 100644
--- a/sound/soc/sof/intel/hda-dsp.c
+++ b/sound/soc/sof/intel/hda-dsp.c
@@ -892,6 +892,12 @@ int hda_dsp_suspend(struct snd_sof_dev *sdev, u32 target_state)
 	return snd_sof_dsp_set_power_state(sdev, &target_dsp_state);
 }

+int hda_dsp_shutdown(struct snd_sof_dev *sdev)
+{
+	sdev->system_suspend_target = SOF_SUSPEND_S3;
+	return snd_sof_suspend(sdev->dev);
+}
+
 int hda_dsp_set_hw_params_upon_resume(struct snd_sof_dev *sdev)
 {
 #if IS_ENABLED(CONFIG_SND_SOC_SOF_HDA)
diff --git a/sound/soc/sof/intel/hda.h b/sound/soc/sof/intel/hda.h
index a3b6f3e9121c..010577885913 100644
--- a/sound/soc/sof/intel/hda.h
+++ b/sound/soc/sof/intel/hda.h
@@ -512,6 +512,7 @@ int hda_dsp_resume(struct snd_sof_dev *sdev);
 int hda_dsp_runtime_suspend(struct snd_sof_dev *sdev);
 int hda_dsp_runtime_resume(struct snd_sof_dev *sdev);
 int hda_dsp_runtime_idle(struct snd_sof_dev *sdev);
+int hda_dsp_shutdown(struct snd_sof_dev *sdev);
 int hda_dsp_set_hw_params_upon_resume(struct snd_sof_dev *sdev);
 void hda_dsp_dump_skl(struct snd_sof_dev *sdev, u32 flags);
 void hda_dsp_dump(struct snd_sof_dev *sdev, u32 flags);
diff --git a/sound/soc/sof/intel/icl.c b/sound/soc/sof/intel/icl.c
index e9d5a0a58504..88a74be8a0c1 100644
--- a/sound/soc/sof/intel/icl.c
+++ b/sound/soc/sof/intel/icl.c
@@ -26,9 +26,10 @@ static const struct snd_sof_debugfs_map icl_dsp_debugfs[] = {

 /* Icelake ops */
 const struct snd_sof_dsp_ops sof_icl_ops = {
-	/* probe and remove */
+	/* probe/remove/shutdown */
 	.probe		= hda_dsp_probe,
 	.remove		= hda_dsp_remove,
+	.shutdown	= hda_dsp_shutdown,

 	/* Register IO */
 	.write		= sof_io_write,
diff --git a/sound/soc/sof/intel/tgl.c b/sound/soc/sof/intel/tgl.c
index 2252ca38ff4b..4f661f042d4d 100644
--- a/sound/soc/sof/intel/tgl.c
+++ b/sound/soc/sof/intel/tgl.c
@@ -25,6 +25,7 @@ const struct snd_sof_dsp_ops sof_tgl_ops = {
 	/* probe and remove */
 	.probe		= hda_dsp_probe,
 	.remove		= hda_dsp_remove,
+	.shutdown       = hda_dsp_shutdown,

 	/* Register IO */
 	.write		= sof_io_write,
diff --git a/sound/soc/sof/ops.h b/sound/soc/sof/ops.h
index 95e748b36903..7562097bd7d5 100644
--- a/sound/soc/sof/ops.h
+++ b/sound/soc/sof/ops.h
@@ -37,6 +37,14 @@ static inline int snd_sof_remove(struct snd_sof_dev *sdev)
 	return 0;
 }

+static inline int snd_sof_shutdown(struct snd_sof_dev *sdev)
+{
+	if (sof_ops(sdev)->shutdown)
+		return sof_ops(sdev)->shutdown(sdev);
+
+	return 0;
+}
+
 /* control */

 /*
diff --git a/sound/soc/sof/sof-pci-dev.c b/sound/soc/sof/sof-pci-dev.c
index 9adf50b20a73..a93b3aa6349c 100644
--- a/sound/soc/sof/sof-pci-dev.c
+++ b/sound/soc/sof/sof-pci-dev.c
@@ -269,7 +269,7 @@ static const struct sof_dev_desc ehl_desc = {
 	.default_tplg_path = "intel/sof-tplg",
 	.default_fw_filename = "sof-ehl.ri",
 	.nocodec_tplg_filename = "sof-ehl-nocodec.tplg",
-	.ops = &sof_cnl_ops,
+	.ops = &sof_tgl_ops,
 };
 #endif

diff --git a/sound/soc/sof/sof-priv.h b/sound/soc/sof/sof-priv.h
index 68da8f797403..8d0c33c6d053 100644
--- a/sound/soc/sof/sof-priv.h
+++ b/sound/soc/sof/sof-priv.h
@@ -98,9 +98,10 @@ struct snd_sof_pdata;
  */
 struct snd_sof_dsp_ops {

-	/* probe and remove */
+	/* probe/remove/shutdown */
 	int (*probe)(struct snd_sof_dev *sof_dev); /* mandatory */
 	int (*remove)(struct snd_sof_dev *sof_dev); /* optional */
+	int (*shutdown)(struct snd_sof_dev *sof_dev); /* optional */

 	/* DSP core boot / reset */
 	int (*run)(struct snd_sof_dev *sof_dev); /* mandatory */
@@ -460,6 +461,7 @@ struct snd_sof_dev {

 int snd_sof_device_probe(struct device *dev, struct snd_sof_pdata *plat_data);
 int snd_sof_device_remove(struct device *dev);
+int snd_sof_device_shutdown(struct device *dev);

 int snd_sof_runtime_suspend(struct device *dev);
 int snd_sof_runtime_resume(struct device *dev);