diff options
Diffstat (limited to 'SPECS')
| -rw-r--r-- | SPECS/kernel.spec | 3560 |
1 files changed, 3560 insertions, 0 deletions
diff --git a/SPECS/kernel.spec b/SPECS/kernel.spec new file mode 100644 index 0000000..9edde19 --- /dev/null +++ b/SPECS/kernel.spec @@ -0,0 +1,3560 @@ +# We have to override the new %%install behavior because, well... the kernel is special. +%global __spec_install_pre %{___build_pre} + +# this should go away soon +%define _legacy_common_support 1 + +# At the time of this writing (2019-03), RHEL8 packages use w2.xzdio +# compression for rpms (xz, level 2). +# Kernel has several large (hundreds of mbytes) rpms, they take ~5 mins +# to compress by single-threaded xz. Switch to threaded compression, +# and from level 2 to 3 to keep compressed sizes close to "w2" results. +# +# NB: if default compression in /usr/lib/rpm/redhat/macros ever changes, +# this one might need tweaking (e.g. if default changes to w3.xzdio, +# change below to w4T.xzdio): +# +# This is disabled on i686 as it triggers oom errors + +%ifnarch i686 +%define _binary_payload w3T.xzdio +%endif + +Summary: The Linux kernel + +# For a kernel released for public testing, released_kernel should be 1. +# For internal testing builds during development, it should be 0. +# For rawhide and/or a kernel built from an rc or git snapshot, +# released_kernel should be 0. +# For a stable, released kernel, released_kernel should be 1. +%global released_kernel 1 + +%if 0%{?fedora} +%define secure_boot_arch x86_64 +%else +%define secure_boot_arch x86_64 aarch64 s390x ppc64le +%endif + +# Signing for secure boot authentication +%ifarch %{secure_boot_arch} +%global signkernel 1 +%else +%global signkernel 0 +%endif + +# Sign modules on all arches +%global signmodules 1 + +# Compress modules only for architectures that build modules +%ifarch noarch +%global zipmodules 0 +%else +%global zipmodules 1 +%endif + +%if %{zipmodules} +%global zipsed -e 's/\.ko$/\.ko.xz/' +%endif + +# define buildid .local + +%if 0%{?fedora} +%define primary_target fedora +%else +%define primary_target rhel +%endif + +# baserelease defines which build revision of this kernel version we're +# building. We used to call this fedora_build, but the magical name +# baserelease is matched by the rpmdev-bumpspec tool, which you should use. +# +# We used to have some extra magic weirdness to bump this automatically, +# but now we don't. Just use: rpmdev-bumpspec -c 'comment for changelog' +# When changing base_sublevel below or going from rc to a final kernel, +# reset this by hand to 1 (or to 0 and then use rpmdev-bumpspec). +# scripts/rebase.sh should be made to do that for you, actually. +# +# NOTE: baserelease must be > 0 or bad things will happen if you switch +# to a released kernel (released version will be < rc version) +# +# For non-released -rc kernels, this will be appended after the rcX and +# gitX tags, so a 3 here would become part of release "0.rcX.gitX.3" +# +%global baserelease 202 +%global fedora_build %{baserelease} + +# base_sublevel is the kernel version we're starting with and patching +# on top of -- for example, 3.1-rc7-git1 starts with a 3.0 base, +# which yields a base_sublevel of 0. +%define base_sublevel 7 + +## If this is a released kernel ## +%if 0%{?released_kernel} + +# Do we have a -stable update to apply? +%define stable_update 8 +# Set rpm version accordingly +%if 0%{?stable_update} +%define stablerev %{stable_update} +%define stable_base %{stable_update} +%endif +%define rpmversion 5.%{base_sublevel}.%{stable_update} + +## The not-released-kernel case ## +%else +# The next upstream release sublevel (base_sublevel+1) +%define upstream_sublevel %(echo $((%{base_sublevel} + 1))) +# The rc snapshot level +%global rcrev 0 +# The git snapshot level +%define gitrev 0 +# Set rpm version accordingly +%define rpmversion 5.%{upstream_sublevel}.0 +%endif +# Nb: The above rcrev and gitrev values automagically define Patch00 and Patch01 below. + +# What parts do we want to build? We must build at least one kernel. +# These are the kernels that are built IF the architecture allows it. +# All should default to 1 (enabled) and be flipped to 0 (disabled) +# by later arch-specific checks. + +# The following build options are enabled by default. +# Use either --without <opt> in your rpmbuild command or force values +# to 0 in here to disable them. +# +# standard kernel +%define with_up %{?_without_up: 0} %{?!_without_up: 1} +# kernel PAE (only valid for ARM (lpae)) +%define with_pae %{?_without_pae: 0} %{?!_without_pae: 1} +# kernel-debug +%define with_debug %{?_without_debug: 0} %{?!_without_debug: 1} +# kernel-doc +%define with_doc %{?_without_doc: 0} %{?!_without_doc: 1} +# kernel-headers +%define with_headers %{?_without_headers: 0} %{?!_without_headers: 1} +%define with_cross_headers %{?_without_cross_headers: 0} %{?!_without_cross_headers: 1} +# perf +%define with_perf %{?_without_perf: 0} %{?!_without_perf: 1} +# tools +%define with_tools %{?_without_tools: 0} %{?!_without_tools: 1} +# bpf tool +%define with_bpftool %{?_without_bpftool: 0} %{?!_without_bpftool: 1} +# kernel-debuginfo +%define with_debuginfo %{?_without_debuginfo: 0} %{?!_without_debuginfo: 1} +# Want to build a the vsdo directories installed +%define with_vdso_install %{?_without_vdso_install: 0} %{?!_without_vdso_install: 1} +# kernel-zfcpdump (s390 specific kernel for zfcpdump) +%define with_zfcpdump %{?_without_zfcpdump: 0} %{?!_without_zfcpdump: 1} +# kernel-abi-whitelists +%define with_kernel_abi_whitelists %{?_without_kernel_abi_whitelists: 0} %{?!_without_kernel_abi_whitelists: 1} +# internal samples and selftests +%define with_selftests %{?_without_selftests: 0} %{?!_without_selftests: 1} +# +# Additional options for user-friendly one-off kernel building: +# +# Only build the base kernel (--with baseonly): +%define with_baseonly %{?_with_baseonly: 1} %{?!_with_baseonly: 0} +# Only build the pae kernel (--with paeonly): +%define with_paeonly %{?_with_paeonly: 1} %{?!_with_paeonly: 0} +# Only build the debug kernel (--with dbgonly): +%define with_dbgonly %{?_with_dbgonly: 1} %{?!_with_dbgonly: 0} +# Control whether we perform a compat. check against published ABI. +%define with_kabichk %{?_without_kabichk: 0} %{?!_without_kabichk: 1} +# Temporarily disable kabi checks until RC. +%define with_kabichk 0 +# Control whether we perform a compat. check against DUP ABI. +%define with_kabidupchk %{?_with_kabidupchk: 1} %{?!_with_kabidupchk: 0} +# +# Control whether to run an extensive DWARF based kABI check. +# Note that this option needs to have baseline setup in SOURCE300. +%define with_kabidwchk %{?_without_kabidwchk: 0} %{?!_without_kabidwchk: 1} +%define with_kabidw_base %{?_with_kabidw_base: 1} %{?!_with_kabidw_base: 0} +# +# should we do C=1 builds with sparse +%define with_sparse %{?_with_sparse: 1} %{?!_with_sparse: 0} +# +# Cross compile requested? +%define with_cross %{?_with_cross: 1} %{?!_with_cross: 0} +# +# build a release kernel on rawhide +%define with_release %{?_with_release: 1} %{?!_with_release: 0} + +# verbose build, i.e. no silent rules and V=1 +%define with_verbose %{?_with_verbose: 1} %{?!_with_verbose: 0} + +# +# check for mismatched config options +%define with_configchecks %{?_without_configchecks: 0} %{?!_without_configchecks: 1} + +# +# gcov support +%define with_gcov %{?_with_gcov:1}%{?!_with_gcov:0} + +# +# ipa_clone support +%define with_ipaclones %{?_without_ipaclones: 0} %{?!_without_ipaclones: 1} + +# Want to build a vanilla kernel build without any non-upstream patches? +%define with_vanilla %{?_with_vanilla: 1} %{?!_with_vanilla: 0} + +# Set debugbuildsenabled to 1 for production (build separate debug kernels) +# and 0 for rawhide (all kernels are debug kernels). +# See also 'make debug' and 'make release'. +%define debugbuildsenabled 1 + +%if 0%{?fedora} +# Kernel headers are being normally split out into a separate package but I am lazy +%define with_headers 0 +%define with_cross_headers 0 +# no selftests for now +%define with_selftests 0 +# no ipa_clone for now +%define with_ipaclones 0 +# no whitelist +%define with_kernel_abi_whitelists 0 +# Fedora builds these separately +%define with_perf 0 +%define with_tools 0 +%define with_bpftool 0 +%endif + +%if %{with_verbose} +%define make_opts V=1 +%else +%define make_opts -s +%endif + +# pkg_release is what we'll fill in for the rpm Release: field +%if 0%{?released_kernel} + +%define pkg_release fsync.%{fedora_build}%{?buildid}%{?dist} + +%else + +# non-released_kernel +%if 0%{?rcrev} +%define rctag .rc%rcrev +%else +%define rctag .rc0 +%endif +%if 0%{?gitrev} +%define gittag .git%gitrev +%else +%define gittag .git0 +%endif +%define pkg_release fsync.%{?rctag}%{?gittag}.%{fedora_build}%{?buildid}%{?dist} + +%endif + +# The kernel tarball/base version +%define kversion 5.%{base_sublevel} + + +# turn off debug kernel and kabichk for gcov builds +%if %{with_gcov} +%define with_debug 0 +%define with_kabichk 0 +%define with_kabidupchk 0 +%define with_kabidwchk 0 +%endif + +# turn off kABI DWARF-based check if we're generating the base dataset +%if %{with_kabidw_base} +%define with_kabidwchk 0 +%endif + +# kpatch_kcflags are extra compiler flags applied to base kernel +# -fdump-ipa-clones is enabled only for base kernels on selected arches +%if %{with_ipaclones} +%ifarch x86_64 ppc64le +%define kpatch_kcflags -fdump-ipa-clones +%else +%define with_ipaclones 0 +%endif +%endif + +%define make_target bzImage +%define image_install_path boot + +%define KVERREL %{version}-%{release}.%{_target_cpu} +%define KVERREL_RE %(echo %KVERREL | sed 's/+/[+]/g') +%define hdrarch %_target_cpu +%define asmarch %_target_cpu + +%if 0%{!?nopatches:1} +%define nopatches 0 +%endif + +%if %{with_vanilla} +%define nopatches 1 +%endif + +%if %{nopatches} +%define variant -vanilla +%endif + +%if !%{debugbuildsenabled} +%define with_debug 0 +%endif + +%if !%{with_debuginfo} +%define _enable_debug_packages 0 +%endif +%define debuginfodir /usr/lib/debug +# Needed because we override almost everything involving build-ids +# and debuginfo generation. Currently we rely on the old alldebug setting. +%global _build_id_links alldebug + +# kernel PAE is only built on ARMv7 +%ifnarch armv7hl +%define with_pae 0 +%endif + +# if requested, only build base kernel +%if %{with_baseonly} +%define with_pae 0 +%define with_debug 0 +%endif + +# if requested, only build pae kernel +%if %{with_paeonly} +%define with_up 0 +%define with_debug 0 +%endif + +# if requested, only build debug kernel +%if %{with_dbgonly} +%if %{debugbuildsenabled} +%define with_up 0 +%endif +%define with_pae 0 +%define with_tools 0 +%define with_perf 0 +%define with_bpftool 0 +%endif + +# turn off kABI DUP check and DWARF-based check if kABI check is disabled +%if !%{with_kabichk} +%define with_kabidupchk 0 +%define with_kabidwchk 0 +%endif + +%if %{with_vdso_install} +%define use_vdso 1 +%endif + + +%ifnarch noarch +%define with_kernel_abi_whitelists 0 +%endif + +# Overrides for generic default options + +# only package docs noarch +%ifnarch noarch +%define with_doc 0 +%define doc_build_fail true +%endif + +%if 0%{?fedora} +# don't do debug builds on anything but i686 and x86_64 +%ifnarch i686 x86_64 +%define with_debug 0 +%endif +%endif + +# don't build noarch kernels or headers (duh) +%ifarch noarch +%define with_up 0 +%define with_headers 0 +%define with_cross_headers 0 +%define with_tools 0 +%define with_perf 0 +%define with_bpftool 0 +%define with_selftests 0 +%define with_debug 0 +%define all_arch_configs kernel-%{version}-*.config +%endif + +# sparse blows up on ppc +%ifnarch ppc64le +%define with_sparse 0 +%endif + +# zfcpdump mechanism is s390 only +%ifnarch s390x +%define with_zfcpdump 0 +%endif + +%if 0%{?fedora} +# This is not for Fedora +%define with_zfcpdump 0 +%endif + +# Per-arch tweaks + +%ifarch i686 +%define asmarch x86 +%define hdrarch i386 +%define all_arch_configs kernel-%{version}-i?86*.config +%define kernel_image arch/x86/boot/bzImage +%endif + +%ifarch x86_64 +%define asmarch x86 +%define all_arch_configs kernel-%{version}-x86_64*.config +%define kernel_image arch/x86/boot/bzImage +%endif + +%ifarch ppc64le +%define asmarch powerpc +%define hdrarch powerpc +%define make_target vmlinux +%define kernel_image vmlinux +%define kernel_image_elf 1 +%define all_arch_configs kernel-%{version}-ppc64le*.config +%define kcflags -O3 +%endif + +%ifarch s390x +%define asmarch s390 +%define hdrarch s390 +%define all_arch_configs kernel-%{version}-s390x.config +%define kernel_image arch/s390/boot/bzImage +%endif + +%ifarch %{arm} +%define all_arch_configs kernel-%{version}-arm*.config +%define skip_nonpae_vdso 1 +%define asmarch arm +%define hdrarch arm +%define make_target bzImage +%define kernel_image arch/arm/boot/zImage +# http://lists.infradead.org/pipermail/linux-arm-kernel/2012-March/091404.html +%define kernel_mflags KALLSYMS_EXTRA_PASS=1 +# we only build headers/perf/tools on the base arm arches +# just like we used to only build them on i386 for x86 +%ifnarch armv7hl +%define with_headers 0 +%define with_cross_headers 0 +%endif +# These currently don't compile on armv7 +%define with_selftests 0 +%endif + +%ifarch aarch64 +%define all_arch_configs kernel-%{version}-aarch64*.config +%define asmarch arm64 +%define hdrarch arm64 +%define make_target Image.gz +%define kernel_image arch/arm64/boot/Image.gz +%endif + +# Should make listnewconfig fail if there's config options +# printed out? +%if %{nopatches} +%define with_configchecks 0 +%endif + +# To temporarily exclude an architecture from being built, add it to +# %%nobuildarches. Do _NOT_ use the ExclusiveArch: line, because if we +# don't build kernel-headers then the new build system will no longer let +# us use the previous build of that package -- it'll just be completely AWOL. +# Which is a BadThing(tm). + +# We only build kernel-headers on the following... +%if 0%{?fedora} +%define nobuildarches i386 +%else +%define nobuildarches i386 i686 +%endif + +%ifarch %nobuildarches +%define with_up 0 +%define with_debug 0 +%define with_debuginfo 0 +%define with_perf 0 +%define with_tools 0 +%define with_bpftool 0 +%define with_selftests 0 +%define with_pae 0 +%define _enable_debug_packages 0 +%endif + +# Architectures we build tools/cpupower on +%if 0%{?fedora} +%define cpupowerarchs %{ix86} x86_64 ppc64le %{arm} aarch64 +%else +%define cpupowerarchs i686 x86_64 ppc64le aarch64 +%endif + +%if %{use_vdso} + +%if 0%{?skip_nonpae_vdso} +%define _use_vdso 0 +%else +%define _use_vdso 1 +%endif + +%else +%define _use_vdso 0 +%endif + +# +# Packages that need to be installed before the kernel is, because the %%post +# scripts use them. +# +%define kernel_prereq coreutils, systemd >= 203-2, /usr/bin/kernel-install +%define initrd_prereq dracut >= 027 + + +Name: kernel%{?variant} +License: GPLv2 and Redistributable, no modification permitted +URL: https://www.kernel.org/ +Version: %{rpmversion} +Release: %{pkg_release} +# DO NOT CHANGE THE 'ExclusiveArch' LINE TO TEMPORARILY EXCLUDE AN ARCHITECTURE BUILD. +# SET %%nobuildarches (ABOVE) INSTEAD +%if 0%{?fedora} +ExclusiveArch: x86_64 s390x %{arm} aarch64 ppc64le +%else +ExclusiveArch: noarch i386 i686 x86_64 s390x %{arm} aarch64 ppc64le +%endif +ExclusiveOS: Linux +%ifnarch %{nobuildarches} +Requires: kernel-core-uname-r = %{KVERREL}%{?variant} +Requires: kernel-modules-uname-r = %{KVERREL}%{?variant} +%endif + + +# +# List the packages used during the kernel build +# +BuildRequires: kmod, patch, bash, tar, git-core +BuildRequires: bzip2, xz, findutils, gzip, m4, perl-interpreter, perl-Carp, perl-devel, perl-generators, make, diffutils, gawk +BuildRequires: gcc, binutils, redhat-rpm-config, hmaccalc, bison, flex +BuildRequires: net-tools, hostname, bc, elfutils-devel +%if 0%{?fedora} +BuildRequires: dwarves +%endif +# Used to mangle unversioned shebangs to be Python 3 +BuildRequires: python3-devel +%if %{with_headers} +BuildRequires: rsync +%endif +%if %{with_doc} +BuildRequires: xmlto, asciidoc, python3-sphinx +%endif +%if %{with_sparse} +BuildRequires: sparse +%endif +%if %{with_perf} +BuildRequires: zlib-devel binutils-devel newt-devel perl(ExtUtils::Embed) bison flex xz-devel +BuildRequires: audit-libs-devel +BuildRequires: java-devel +%ifnarch %{arm} s390x +BuildRequires: numactl-devel +%endif +%endif +%if %{with_tools} +BuildRequires: gettext ncurses-devel +%ifnarch s390x +BuildRequires: pciutils-devel +%endif +%endif +%if %{with_bpftool} +BuildRequires: python3-docutils +BuildRequires: zlib-devel binutils-devel +%endif +%if %{with_selftests} +%if 0%{?fedora} +BuildRequires: clang llvm +%else +BuildRequires: llvm-toolset +%endif +%ifnarch %{arm} +BuildRequires: numactl-devel +%endif +BuildRequires: libcap-devel libcap-ng-devel rsync +%endif +BuildConflicts: rhbuildsys(DiskFree) < 500Mb +%if %{with_debuginfo} +BuildRequires: rpm-build, elfutils +BuildConflicts: rpm < 4.13.0.1-19 +%if 0%{?fedora} +BuildConflicts: dwarves < 1.13 +%endif +# Most of these should be enabled after more investigation +%undefine _include_minidebuginfo +%undefine _find_debuginfo_dwz_opts +%undefine _unique_build_ids +%undefine _unique_debug_names +%undefine _unique_debug_srcs +%undefine _debugsource_packages +%undefine _debuginfo_subpackages +%global _find_debuginfo_opts -r +%global _missing_build_ids_terminate_build 1 +%global _no_recompute_build_ids 1 +%endif +%if %{with_kabidwchk} || %{with_kabidw_base} +BuildRequires: kabi-dw +%endif + +%if %{signkernel}%{signmodules} +BuildRequires: openssl openssl-devel +%if %{signkernel} +%ifarch x86_64 aarch64 +BuildRequires: nss-tools +BuildRequires: pesign >= 0.10-4 +%endif +%endif +%endif + +%if %{with_cross} +BuildRequires: binutils-%{_build_arch}-linux-gnu, gcc-%{_build_arch}-linux-gnu +%define cross_opts CROSS_COMPILE=%{_build_arch}-linux-gnu- +%endif + +# These below are required to build man pages +%if %{with_perf} +BuildRequires: xmlto +%endif +%if %{with_perf} || %{with_tools} +BuildRequires: asciidoc +%endif + +Source0: https://www.kernel.org/pub/linux/kernel/v5.x/linux-%{kversion}.tar.xz + +# Name of the packaged file containing signing key +%ifarch ppc64le +%define signing_key_filename kernel-signing-ppc.cer +%endif +%ifarch s390x +%define signing_key_filename kernel-signing-s390.cer +%endif + +Source10: x509.genkey.rhel +Source11: x509.genkey.fedora +%if %{?released_kernel} + +Source12: securebootca.cer +Source13: secureboot.cer +Source14: secureboot_s390.cer +Source15: secureboot_ppc.cer + +%define secureboot_ca %{SOURCE12} +%ifarch x86_64 aarch64 +%define secureboot_key %{SOURCE13} +%define pesign_name redhatsecureboot301 +%endif +%ifarch s390x +%define secureboot_key %{SOURCE14} +%define pesign_name redhatsecureboot302 +%endif +%ifarch ppc64le +%define secureboot_key %{SOURCE15} +%define pesign_name redhatsecureboot303 +%endif + +# released_kernel +%else + +Source12: redhatsecurebootca2.cer +Source13: redhatsecureboot003.cer + +%define secureboot_ca %{SOURCE12} +%define secureboot_key %{SOURCE13} +%define pesign_name redhatsecureboot003 + +# released_kernel +%endif + +Source22: mod-extra.list.rhel +Source16: mod-extra.list.fedora +Source17: mod-extra.sh +Source18: mod-sign.sh +Source19: mod-extra-blacklist.sh +Source79: parallel_xz.sh + +Source80: filter-x86_64.sh.fedora +Source81: filter-armv7hl.sh.fedora +Source82: filter-i686.sh.fedora +Source83: filter-aarch64.sh.fedora +Source86: filter-ppc64le.sh.fedora +Source87: filter-s390x.sh.fedora +Source89: filter-modules.sh.fedora + +Source90: filter-x86_64.sh.rhel +Source91: filter-armv7hl.sh.rhel +Source92: filter-i686.sh.rhel +Source93: filter-aarch64.sh.rhel +Source96: filter-ppc64le.sh.rhel +Source97: filter-s390x.sh.rhel +Source99: filter-modules.sh.rhel +%define modsign_cmd %{SOURCE18} + +Source20: kernel-aarch64-rhel.config +Source21: kernel-aarch64-debug-rhel.config +Source30: kernel-ppc64le-rhel.config +Source31: kernel-ppc64le-debug-rhel.config +Source32: kernel-s390x-rhel.config +Source33: kernel-s390x-debug-rhel.config +Source34: kernel-s390x-zfcpdump-rhel.config +Source35: kernel-x86_64-rhel.config +Source36: kernel-x86_64-debug-rhel.config + +Source37: kernel-aarch64-fedora.config +Source38: kernel-aarch64-debug-fedora.config +Source39: kernel-armv7hl-fedora.config +Source40: kernel-armv7hl-debug-fedora.config +Source41: kernel-armv7hl-lpae-fedora.config +Source42: kernel-armv7hl-lpae-debug-fedora.config +Source43: kernel-i686-fedora.config +Source44: kernel-i686-debug-fedora.config +Source45: kernel-ppc64le-fedora.config +Source46: kernel-ppc64le-debug-fedora.config +Source47: kernel-s390x-fedora.config +Source48: kernel-s390x-debug-fedora.config +Source49: kernel-x86_64-fedora.config +Source50: kernel-x86_64-debug-fedora.config + + + +Source51: generate_all_configs.sh + +Source52: process_configs.sh +Source53: generate_bls_conf.sh +Source56: update_scripts.sh + +Source54: mod-internal.list +Source55: merge.pl + +Source200: check-kabi + +Source201: Module.kabi_aarch64 +Source202: Module.kabi_ppc64le +Source203: Module.kabi_s390x +Source204: Module.kabi_x86_64 + +Source210: Module.kabi_dup_aarch64 +Source211: Module.kabi_dup_ppc64le +Source212: Module.kabi_dup_s390x +Source213: Module.kabi_dup_x86_64 + +# Source300: kernel-abi-whitelists-%{rpmversion}-%{distro_build}.tar.bz2 +# Source301: kernel-kabi-dw-%{rpmversion}-%{distro_build}.tar.bz2 + +# Sources for kernel-tools +Source2000: cpupower.service +Source2001: cpupower.config + +## Patches needed for building this package + +# Patch1: patch-%{rpmversion}-redhat.patch + +# empty final patch to facilitate testing of kernel patches +# Patch999999: linux-kernel-test.patch + +# This file is intentionally left empty in the stock kernel. Its a nicety +# added for those wanting to do custom rebuilds with altered config opts. +Source1000: kernel-local + +# Here should be only the patches up to the upstream canonical Linus tree. + +# For a stable release kernel +%if 0%{?stable_update} +%if 0%{?stable_base} +%define stable_patch_00 patch-5.%{base_sublevel}.%{stable_base}.xz +Source5000: %{stable_patch_00} +%endif + +# non-released_kernel case +# These are automagically defined by the rcrev and gitrev values set up +# near the top of this spec file. +%else +%if 0%{?rcrev} +Source5000: patch-5.%{upstream_sublevel}-rc%{rcrev}.xz +%if 0%{?gitrev} +Source5001: patch-5.%{upstream_sublevel}-rc%{rcrev}-git%{gitrev}.xz +%endif +%else +# pre-{base_sublevel+1}-rc1 case +%if 0%{?gitrev} +Source5000: patch-5.%{base_sublevel}-git%{gitrev}.xz +%endif +%endif +%endif + +## Patches needed for building this package + +## compile fixes + +%if !%{nopatches} + +Patch6: 0001-ACPI-APEI-arm64-Ignore-broken-HPE-moonshot-APEI-supp.patch +Patch8: 0001-ACPI-irq-Workaround-firmware-issue-on-X-Gene-based-m.patch +Patch9: 0001-aarch64-acpi-scan-Fix-regression-related-to-X-Gene-U.patch +Patch11: 0001-kdump-round-up-the-total-memory-size-to-128M-for-cra.patch +Patch12: 0001-kdump-add-support-for-crashkernel-auto.patch +Patch15: 0001-kdump-fix-a-grammar-issue-in-a-kernel-message.patch +Patch19: 0001-Vulcan-AHCI-PCI-bar-fix-for-Broadcom-Vulcan-early-si.patch +Patch20: 0001-ahci-thunderx2-Fix-for-errata-that-affects-stop-engi.patch +Patch24: 0001-scsi-smartpqi-add-inspur-advantech-ids.patch +Patch26: 0001-ipmi-do-not-configure-ipmi-for-HPE-m400.patch +Patch28: 0001-iommu-arm-smmu-workaround-DMA-mode-issues.patch +Patch29: 0001-arm-aarch64-Drop-the-EXPERT-setting-from-ARM64_FORCE.patch +Patch31: 0001-Add-efi_status_to_str-and-rework-efi_status_to_err.patch +Patch32: 0001-Make-get_cert_list-use-efi_status_to_str-to-print-er.patch +Patch33: 0001-security-lockdown-expose-a-hook-to-lock-the-kernel-d.patch +Patch34: 0001-efi-Add-an-EFI_SECURE_BOOT-flag-to-indicate-secure-b.patch +Patch35: 0001-efi-Lock-down-the-kernel-if-booted-in-secure-boot-mo.patch +Patch36: 0001-s390-Lock-down-the-kernel-when-the-IPL-secure-flag-i.patch +Patch37: 0001-Add-option-of-13-for-FORCE_MAX_ZONEORDER.patch +Patch58: 0001-arm-make-CONFIG_HIGHPTE-optional-without-CONFIG_EXPE.patch +Patch59: 0001-ARM-tegra-usb-no-reset.patch +Patch62: 0001-Input-rmi4-remove-the-need-for-artificial-IRQ-in-cas.patch +Patch63: 0001-Drop-that-for-now.patch +Patch64: 0001-KEYS-Make-use-of-platform-keyring-for-module-signatu.patch +Patch65: 0001-mm-kmemleak-skip-late_init-if-not-skip-disable.patch +Patch66: 0001-ARM-fix-__get_user_check-in-case-uaccess_-calls-are-.patch +Patch67: 0001-soc-bcm2835-Sync-xHCI-reset-firmware-property-with-d.patch +Patch68: 0001-firmware-raspberrypi-Introduce-vl805-init-routine.patch +Patch69: 0001-PCI-brcmstb-Wait-for-Raspberry-Pi-s-firmware-when-pr.patch +Patch70: 0001-USB-pci-quirks-Add-Raspberry-Pi-4-quirk.patch +Patch75: 0001-e1000e-bump-up-timeout-to-wait-when-ME-un-configure-.patch +Patch76: 0001-perf-cs-etm-Move-defined-of-traceid_list.patch +Patch79: 0001-disp-gv100-expose-capabilities-class.patch +Patch80: 0001-core-memory-remove-redundant-assignments-to-variable.patch +Patch81: 0001-acr-Use-kmemdup-instead-of-kmalloc-and-memcpy.patch +Patch82: 0001-drm-Use-generic-helper-to-check-_PR3-presence.patch +Patch83: 0001-mmu-Remove-unneeded-semicolon.patch +Patch84: 0001-device-rework-mmio-mapping-code-to-get-rid-of-second.patch +Patch85: 0001-device-detect-if-changing-endianness-failed.patch +Patch86: 0001-device-detect-vGPUs.patch +Patch87: 0001-device-use-regular-PRI-accessors-in-chipset-detectio.patch +Patch89: 0001-disp-nv50-increase-timeout-on-pio-channel-free-polli.patch +Patch90: 0001-disp-hda-gt215-pass-head-to-nvkm_ior.hda.eld.patch +Patch91: 0001-disp-hda-gf119-add-HAL-for-programming-device-entry-.patch +Patch92: 0001-disp-hda-gf119-select-HDA-device-entry-based-on-boun.patch +Patch93: 0001-disp-hda-gv100-NV_PDISP_SF_AUDIO_CNTRL0-register-mov.patch +Patch94: 0001-kms-nv50-Initialize-core-channel-in-nouveau_display_.patch +Patch95: 0001-kms-nv50-Probe-SOR-and-PIOR-caps-for-DP-interlacing-.patch +Patch96: 0001-kms-gv100-Add-support-for-interlaced-modes.patch +Patch97: 0001-kms-nv50-Move-8BPC-limit-for-MST-into-nv50_mstc_get_.patch +Patch98: 0001-kms-nv50-Share-DP-SST-mode_valid-handling-with-MST.patch +Patch99: 0001-virt-vbox-Fix-VBGL_IOCTL_VMMDEV_REQUEST_BIG-and-_LOG.patch +Patch100: 0001-virt-vbox-Fix-guest-capabilities-mask-check.patch +Patch101: 0001-virt-vbox-Rename-guest_caps-struct-members-to-set_gu.patch +Patch102: 0001-virt-vbox-Add-vbg_set_host_capabilities-helper-funct.patch +Patch103: 0001-virt-vbox-Add-support-for-the-new-VBG_IOCTL_ACQUIRE_.patch +Patch104: 0001-virt-vbox-Add-a-few-new-vmmdev-request-types-to-the-.patch +Patch105: 0001-virt-vbox-Log-unknown-ioctl-requests-as-error.patch + +# Thinkpad dual fan control +Patch107: 0001-platform-x86-thinkpad_acpi-Add-support-for-dual-fan-.patch + +# Latest upstream screen driver - https://patchwork.kernel.org/patch/11627069/ +Patch110: 0001-dt-bindings-vendor-prefixes-Add-Xingbangda.patch +Patch111: 0002-dt-bindings-panel-Convert-rocktech-jh057n00900-to-ya.patch +Patch112: 0003-dt-bindings-panel-Add-compatible-for-Xingbangda-XBD5.patch +Patch113: 0004-drm-panel-rocktech-jh057n00900-Rename-the-driver-to-.patch +Patch114: 0005-drm-panel-st7703-Rename-functions-from-jh057n-prefix.patch +Patch115: 0006-drm-panel-st7703-Prepare-for-supporting-multiple-pan.patch +Patch116: 0007-drm-panel-st7703-Move-code-specific-to-jh057n-closer.patch +Patch117: 0008-drm-panel-st7703-Move-generic-part-of-init-sequence-.patch +Patch118: 0009-drm-panel-st7703-Add-support-for-Xingbangda-XBD599.patch +Patch119: 0010-drm-panel-st7703-Enter-sleep-after-display-off.patch +Patch120: 0011-drm-panel-st7703-Assert-reset-prior-to-powering-down.patch +Patch121: 0012-arm64-dts-sun50i-a64-pinephone-Enable-LCD-support-on.patch +Patch122: 0013-arm64-dts-sun50i-a64-pinephone-Add-touchscreen-suppo.patch +# Back port from 5.8 +Patch123: 0001-usb-fusb302-Convert-to-use-GPIO-descriptors.patch +# Tegra194 ACPI PCI quirk - http://patchwork.ozlabs.org/patch/1221384/ +Patch124: 0001-PCI-Add-MCFG-quirks-for-Tegra194-host-controllers.patch + +# Linux-tkg patches - https://github.com/Frogging-Family/linux-tkg/blob/master/linux57-tkg +Patch202: 0003-glitched-base.patch +Patch203: 0007-v5.7-fsync.patch +# END OF PATCH DEFINITIONS + +%endif + + +%description +The kernel meta package + +# +# This macro does requires, provides, conflicts, obsoletes for a kernel package. +# %%kernel_reqprovconf <subpackage> +# It uses any kernel_<subpackage>_conflicts and kernel_<subpackage>_obsoletes +# macros defined above. +# +%define kernel_reqprovconf \ +Provides: kernel = %{rpmversion}-%{pkg_release}\ +Provides: kernel-%{_target_cpu} = %{rpmversion}-%{pkg_release}%{?1:+%{1}}\ +Provides: kernel-drm-nouveau = 16\ +Provides: kernel-uname-r = %{KVERREL}%{?variant}%{?1:+%{1}}\ +Requires(pre): %{kernel_prereq}\ +Requires(pre): %{initrd_prereq}\ +Requires(pre): linux-firmware >= 20150904-56.git6ebf5d57\ +Requires(preun): systemd >= 200\ +Conflicts: xfsprogs < 4.3.0-1\ +Conflicts: xorg-x11-drv-vmmouse < 13.0.99\ +%{expand:%%{?kernel%{?1:_%{1}}_conflicts:Conflicts: %%{kernel%{?1:_%{1}}_conflicts}}}\ +%{expand:%%{?kernel%{?1:_%{1}}_obsoletes:Obsoletes: %%{kernel%{?1:_%{1}}_obsoletes}}}\ +%{expand:%%{?kernel%{?1:_%{1}}_provides:Provides: %%{kernel%{?1:_%{1}}_provides}}}\ +# We can't let RPM do the dependencies automatic because it'll then pick up\ +# a correct but undesirable perl dependency from the module headers which\ +# isn't required for the kernel proper to function\ +AutoReq: no\ +AutoProv: yes\ +%{nil} + + +%package doc +Summary: Various documentation bits found in the kernel source +Group: Documentation +%description doc +This package contains documentation files from the kernel +source. Various bits of information about the Linux kernel and the +device drivers shipped with it are documented in these files. + +You'll want to install this package if you need a reference to the +options that can be passed to Linux kernel modules at load time. + + +%package headers +Summary: Header files for the Linux kernel for use by glibc +Obsoletes: glibc-kernheaders < 3.0-46 +Provides: glibc-kernheaders = 3.0-46 +%if "0%{?variant}" +Obsoletes: kernel-headers < %{rpmversion}-%{pkg_release} +Provides: kernel-headers = %{rpmversion}-%{pkg_release} +%endif +%description headers +Kernel-headers includes the C header files that specify the interface +between the Linux kernel and userspace libraries and programs. The +header files define structures and constants that are needed for +building most standard programs and are also needed for rebuilding the +glibc package. + +%package cross-headers +Summary: Header files for the Linux kernel for use by cross-glibc +%description cross-headers +Kernel-cross-headers includes the C header files that specify the interface +between the Linux kernel and userspace libraries and programs. The +header files define structures and constants that are needed for +building most standard programs and are also needed for rebuilding the +cross-glibc package. + + +%package debuginfo-common-%{_target_cpu} +Summary: Kernel source files used by %{name}-debuginfo packages +Provides: installonlypkg(kernel) +%description debuginfo-common-%{_target_cpu} +This package is required by %{name}-debuginfo subpackages. +It provides the kernel source files common to all builds. + +%if %{with_perf} +%package -n perf +Summary: Performance monitoring for the Linux kernel +License: GPLv2 +%description -n perf +This package contains the perf tool, which enables performance monitoring +of the Linux kernel. + +%package -n perf-debuginfo +Summary: Debug information for package perf +Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release} +AutoReqProv: no +%description -n perf-debuginfo +This package provides debug information for the perf package. + +# Note that this pattern only works right to match the .build-id +# symlinks because of the trailing nonmatching alternation and +# the leading .*, because of find-debuginfo.sh's buggy handling +# of matching the pattern against the symlinks file. +%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_bindir}/perf(\.debug)?|.*%%{_libexecdir}/perf-core/.*|.*%%{_libdir}/traceevent/plugins/.*|.*%%{_libdir}/libperf-jvmti.so(\.debug)?|XXX' -o perf-debuginfo.list} + +%package -n python3-perf +Summary: Python bindings for apps which will manipulate perf events +%description -n python3-perf +The python3-perf package contains a module that permits applications +written in the Python programming language to use the interface +to manipulate perf events. + +%package -n python3-perf-debuginfo +Summary: Debug information for package perf python bindings +Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release} +AutoReqProv: no +%description -n python3-perf-debuginfo +This package provides debug information for the perf python bindings. + +# the python_sitearch macro should already be defined from above +%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{python3_sitearch}/perf.*so(\.debug)?|XXX' -o python3-perf-debuginfo.list} + +# with_perf +%endif + +%if %{with_tools} +%package -n kernel-tools +Summary: Assortment of tools for the Linux kernel +License: GPLv2 +%ifarch %{cpupowerarchs} +Provides: cpupowerutils = 1:009-0.6.p1 +Obsoletes: cpupowerutils < 1:009-0.6.p1 +Provides: cpufreq-utils = 1:009-0.6.p1 +Provides: cpufrequtils = 1:009-0.6.p1 +Obsoletes: cpufreq-utils < 1:009-0.6.p1 +Obsoletes: cpufrequtils < 1:009-0.6.p1 +Obsoletes: cpuspeed < 1:1.5-16 +Requires: kernel-tools-libs = %{version}-%{release} +%endif +%define __requires_exclude ^%{_bindir}/python +%description -n kernel-tools +This package contains the tools/ directory from the kernel source +and the supporting documentation. + +%package -n kernel-tools-libs +Summary: Libraries for the kernels-tools +License: GPLv2 +%description -n kernel-tools-libs +This package contains the libraries built from the tools/ directory +from the kernel source. + +%package -n kernel-tools-libs-devel +Summary: Assortment of tools for the Linux kernel +License: GPLv2 +Requires: kernel-tools = %{version}-%{release} +%ifarch %{cpupowerarchs} +Provides: cpupowerutils-devel = 1:009-0.6.p1 +Obsoletes: cpupowerutils-devel < 1:009-0.6.p1 +%endif +Requires: kernel-tools-libs = %{version}-%{release} +Provides: kernel-tools-devel +%description -n kernel-tools-libs-devel +This package contains the development files for the tools/ directory from +the kernel source. + +%package -n kernel-tools-debuginfo +Summary: Debug information for package kernel-tools +Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release} +AutoReqProv: no +%description -n kernel-tools-debuginfo +This package provides debug information for package kernel-tools. + +# Note that this pattern only works right to match the .build-id +# symlinks because of the trailing nonmatching alternation and +# the leading .*, because of find-debuginfo.sh's buggy handling +# of matching the pattern against the symlinks file. +%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_bindir}/centrino-decode(\.debug)?|.*%%{_bindir}/powernow-k8-decode(\.debug)?|.*%%{_bindir}/cpupower(\.debug)?|.*%%{_libdir}/libcpupower.*|.*%%{_bindir}/turbostat(\.debug)?|.*%%{_bindir}/x86_energy_perf_policy(\.debug)?|.*%%{_bindir}/tmon(\.debug)?|.*%%{_bindir}/lsgpio(\.debug)?|.*%%{_bindir}/gpio-hammer(\.debug)?|.*%%{_bindir}/gpio-event-mon(\.debug)?|.*%%{_bindir}/iio_event_monitor(\.debug)?|.*%%{_bindir}/iio_generic_buffer(\.debug)?|.*%%{_bindir}/lsiio(\.debug)?|XXX' -o kernel-tools-debuginfo.list} + +# with_tools +%endif + +%if %{with_bpftool} + +%package -n bpftool +Summary: Inspection and simple manipulation of eBPF programs and maps +License: GPLv2 +%description -n bpftool +This package contains the bpftool, which allows inspection and simple +manipulation of eBPF programs and maps. + +%package -n bpftool-debuginfo +Summary: Debug information for package bpftool +Group: Development/Debug +Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release} +AutoReqProv: no +%description -n bpftool-debuginfo +This package provides debug information for the bpftool package. + +%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_sbindir}/bpftool(\.debug)?|XXX' -o bpftool-debuginfo.list} + +# with_bpftool +%endif + +%if %{with_selftests} + +%package selftests-internal +Summary: Kernel samples and selftests +License: GPLv2 +Requires: binutils, bpftool, iproute-tc, nmap-ncat +Requires: kernel-modules-internal = %{version}-%{release} +%description selftests-internal +Kernel sample programs and selftests. + +# Note that this pattern only works right to match the .build-id +# symlinks because of the trailing nonmatching alternation and +# the leading .*, because of find-debuginfo.sh's buggy handling +# of matching the pattern against the symlinks file. +%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_libexecdir}/(ksamples|kselftests)/.*|XXX' -o selftests-debuginfo.list} + +# with_selftests +%endif + +%if %{with_gcov} +%package gcov +Summary: gcov graph and source files for coverage data collection. +%description gcov +kernel-gcov includes the gcov graph and source files for gcov coverage collection. +%endif + +%package -n kernel-abi-whitelists +Summary: The Red Hat Enterprise Linux kernel ABI symbol whitelists +AutoReqProv: no +%description -n kernel-abi-whitelists +The kABI package contains information pertaining to the Red Hat Enterprise +Linux kernel ABI, including lists of kernel symbols that are needed by +external Linux kernel modules, and a yum plugin to aid enforcement. + +%if %{with_kabidw_base} +%package kabidw-base +Summary: The baseline dataset for kABI verification using DWARF data +Group: System Environment/Kernel +AutoReqProv: no +%description kabidw-base +The kabidw-base package contains data describing the current ABI of the Red Hat +Enterprise Linux kernel, suitable for the kabi-dw tool. +%endif + +# +# This macro creates a kernel-<subpackage>-debuginfo package. +# %%kernel_debuginfo_package <subpackage> +# +# Explanation of the find_debuginfo_opts: We build multiple kernels (debug +# pae etc.) so the regex filters those kernels appropriately. We also +# have to package several binaries as part of kernel-devel but getting +# unique build-ids is tricky for these userspace binaries. We don't really +# care about debugging those so we just filter those out and remove it. +%define kernel_debuginfo_package() \ +%package %{?1:%{1}-}debuginfo\ +Summary: Debug information for package %{name}%{?1:-%{1}}\ +Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}\ +Provides: %{name}%{?1:-%{1}}-debuginfo-%{_target_cpu} = %{version}-%{release}\ +Provides: installonlypkg(kernel)\ +AutoReqProv: no\ +%description %{?1:%{1}-}debuginfo\ +This package provides debug information for package %{name}%{?1:-%{1}}.\ +This is required to use SystemTap with %{name}%{?1:-%{1}}-%{KVERREL}.\ +%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*\/usr\/src\/kernels/.*|XXX' -o ignored-debuginfo.list -p '/.*/%%{KVERREL_RE}%{?1:[+]%{1}}/.*|/.*%%{KVERREL_RE}%{?1:\+%{1}}(\.debug)?' -o debuginfo%{?1}.list}\ + + +%{nil} + +# +# This macro creates a kernel-<subpackage>-devel package. +# %%kernel_devel_package <subpackage> <pretty-name> +# +%define kernel_devel_package() \ +%package %{?1:%{1}-}devel\ +Summary: Development package for building kernel modules to match the %{?2:%{2} }kernel\ +Provides: kernel%{?1:-%{1}}-devel-%{_target_cpu} = %{version}-%{release}\ +Provides: kernel-devel-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\ +Provides: kernel-devel-uname-r = %{KVERREL}%{?variant}%{?1:+%{1}}\ +Provides: installonlypkg(kernel)\ +AutoReqProv: no\ +Requires(pre): findutils\ +Requires: findutils\ +Requires: perl-interpreter\ +%description %{?1:%{1}-}devel\ +This package provides kernel headers and makefiles sufficient to build modules\ +against the %{?2:%{2} }kernel package.\ +%{nil} + +# +# kernel-<variant>-ipaclones-internal package +# +%define kernel_ipaclones_package() \ +%package %{?1:%{1}-}ipaclones-internal\ +Summary: *.ipa-clones files generated by -fdump-ipa-clones for kernel%{?1:-%{1}}\ +Group: System Environment/Kernel\ +AutoReqProv: no\ +%description %{?1:%{1}-}ipaclones-internal\ +This package provides *.ipa-clones files.\ +%{nil} + +# +# This macro creates a kernel-<subpackage>-modules-internal package. +# %%kernel_modules_internal_package <subpackage> <pretty-name> +# +%define kernel_modules_internal_package() \ +%package %{?1:%{1}-}modules-internal\ +Summary: Extra kernel modules to match the %{?2:%{2} }kernel\ +Group: System Environment/Kernel\ +Provides: kernel%{?1:-%{1}}-modules-internal-%{_target_cpu} = %{version}-%{release}\ +Provides: kernel%{?1:-%{1}}-modules-internal-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\ +Provides: kernel%{?1:-%{1}}-modules-internal = %{version}-%{release}%{?1:+%{1}}\ +Provides: installonlypkg(kernel-module)\ +Provides: kernel%{?1:-%{1}}-modules-internal-uname-r = %{KVERREL}%{?variant}%{?1:+%{1}}\ +Requires: kernel-uname-r = %{KVERREL}%{?variant}%{?1:+%{1}}\ +Requires: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?variant}%{?1:+%{1}}\ +AutoReq: no\ +AutoProv: yes\ +%description %{?1:%{1}-}modules-internal\ +This package provides kernel modules for the %{?2:%{2} }kernel package for Red Hat internal usage.\ +%{nil} + +# +# This macro creates a kernel-<subpackage>-modules-extra package. +# %%kernel_modules_extra_package <subpackage> <pretty-name> +# +%define kernel_modules_extra_package() \ +%package %{?1:%{1}-}modules-extra\ +Summary: Extra kernel modules to match the %{?2:%{2} }kernel\ +Provides: kernel%{?1:-%{1}}-modules-extra-%{_target_cpu} = %{version}-%{release}\ +Provides: kernel%{?1:-%{1}}-modules-extra-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\ +Provides: kernel%{?1:-%{1}}-modules-extra = %{version}-%{release}%{?1:+%{1}}\ +Provides: installonlypkg(kernel-module)\ +Provides: kernel%{?1:-%{1}}-modules-extra-uname-r = %{KVERREL}%{?variant}%{?1:+%{1}}\ +Requires: kernel-uname-r = %{KVERREL}%{?variant}%{?1:+%{1}}\ +Requires: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?variant}%{?1:+%{1}}\ +AutoReq: no\ +AutoProv: yes\ +%description %{?1:%{1}-}modules-extra\ +This package provides less commonly used kernel modules for the %{?2:%{2} }kernel package.\ +%{nil} + +# +# This macro creates a kernel-<subpackage>-modules package. +# %%kernel_modules_package <subpackage> <pretty-name> +# +%define kernel_modules_package() \ +%package %{?1:%{1}-}modules\ +Summary: kernel modules to match the %{?2:%{2}-}core kernel\ +Provides: kernel%{?1:-%{1}}-modules-%{_target_cpu} = %{version}-%{release}\ +Provides: kernel-modules-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\ +Provides: kernel-modules = %{version}-%{release}%{?1:+%{1}}\ +Provides: installonlypkg(kernel-module)\ +Provides: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?variant}%{?1:+%{1}}\ +Requires: kernel-uname-r = %{KVERREL}%{?variant}%{?1:+%{1}}\ +Recommends: alsa-sof-firmware\ +AutoReq: no\ +AutoProv: yes\ +%description %{?1:%{1}-}modules\ +This package provides commonly used kernel modules for the %{?2:%{2}-}core kernel package.\ +%{nil} + +# +# this macro creates a kernel-<subpackage> meta package. +# %%kernel_meta_package <subpackage> +# +%define kernel_meta_package() \ +%package %{1}\ +summary: kernel meta-package for the %{1} kernel\ +Requires: kernel-%{1}-core-uname-r = %{KVERREL}%{?variant}+%{1}\ +Requires: kernel-%{1}-modules-uname-r = %{KVERREL}%{?variant}+%{1}\ +Provides: installonlypkg(kernel)\ +%description %{1}\ +The meta-package for the %{1} kernel\ +%{nil} + +# +# This macro creates a kernel-<subpackage> and its -devel and -debuginfo too. +# %%define variant_summary The Linux kernel compiled for <configuration> +# %%kernel_variant_package [-n <pretty-name>] <subpackage> +# +%define kernel_variant_package(n:) \ +%package %{?1:%{1}-}core\ +Summary: %{variant_summary}\ +Provides: kernel-%{?1:%{1}-}core-uname-r = %{KVERREL}%{?variant}%{?1:+%{1}}\ +Provides: installonlypkg(kernel)\ +%ifarch ppc64le\ +Obsoletes: kernel-bootwrapper\ +%endif\ +%{expand:%%kernel_reqprovconf}\ +%if %{?1:1} %{!?1:0} \ +%{expand:%%kernel_meta_package %{?1:%{1}}}\ +%endif\ +%{expand:%%kernel_devel_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}}}\ +%{expand:%%kernel_modules_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}}}\ +%{expand:%%kernel_modules_extra_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}}}\ +%{expand:%%kernel_modules_internal_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}}}\ +%{expand:%%kernel_debuginfo_package %{?1:%{1}}}\ +%{nil} + +# Now, each variant package. + +%if %{with_pae} +%define variant_summary The Linux kernel compiled for Cortex-A15 +%kernel_variant_package lpae +%description lpae-core +This package includes a version of the Linux kernel with support for +Cortex-A15 devices with LPAE and HW virtualisation support +%endif + +%if %{with_zfcpdump} +%define variant_summary The Linux kernel compiled for zfcpdump usage +%kernel_variant_package zfcpdump +%description zfcpdump-core +The kernel package contains the Linux kernel (vmlinuz) for use by the +zfcpdump infrastructure. +# with_zfcpdump +%endif + +%define variant_summary The Linux kernel compiled with extra debugging enabled +%kernel_variant_package debug +%description debug-core +The kernel package contains the Linux kernel (vmlinuz), the core of any +Linux operating system. The kernel handles the basic functions +of the operating system: memory allocation, process allocation, device +input and output, etc. + +This variant of the kernel has numerous debugging options enabled. +It should only be installed when trying to gather additional information +on kernel bugs, as some of these options impact performance noticably. + +# And finally the main -core package + +%define variant_summary The Linux kernel +%kernel_variant_package +%description core +The kernel package contains the Linux kernel (vmlinuz), the core of any +Linux operating system. The kernel handles the basic functions +of the operating system: memory allocation, process allocation, device +input and output, etc. + +%if %{with_ipaclones} +%kernel_ipaclones_package +%endif + +%prep +# do a few sanity-checks for --with *only builds +%if %{with_baseonly} +%if !%{with_up}%{with_pae} +echo "Cannot build --with baseonly, up build is disabled" +exit 1 +%endif +%endif + +%if "%{baserelease}" == "0" +echo "baserelease must be greater than zero" +exit 1 +%endif + +# more sanity checking; do it quietly +if [ "%{patches}" != "%%{patches}" ] ; then + for patch in %{patches} ; do + if [ ! -f $patch ] ; then + echo "ERROR: Patch ${patch##/*/} listed in specfile but is missing" + exit 1 + fi + done +fi 2>/dev/null + +patch_command='patch -p1 -F1 -s' +ApplyPatch() +{ + local patch=$1 + shift + if [ ! -f $RPM_SOURCE_DIR/$patch ]; then + exit 1 + fi + if ! grep -E "^Patch[0-9]+: $patch\$" %{_specdir}/${RPM_PACKAGE_NAME%%%%%{?variant}}.spec ; then + if [ "${patch:0:8}" != "patch-5." ] ; then + echo "ERROR: Patch $patch not listed as a source patch in specfile" + exit 1 + fi + fi 2>/dev/null + case "$patch" in + *.bz2) bunzip2 < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;; + *.gz) gunzip < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;; + *.xz) unxz < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;; + *) $patch_command ${1+"$@"} < "$RPM_SOURCE_DIR/$patch" ;; + esac +} + +# don't apply patch if it's empty +ApplyOptionalPatch() +{ + local patch=$1 + shift + if [ ! -f $RPM_SOURCE_DIR/$patch ]; then + exit 1 + fi + local C=$(wc -l $RPM_SOURCE_DIR/$patch | awk '{print $1}') + if [ "$C" -gt 9 ]; then + ApplyPatch $patch ${1+"$@"} + fi +} + +# First we unpack the kernel tarball. +# If this isn't the first make prep, we use links to the existing clean tarball +# which speeds things up quite a bit. + +# Update to latest upstream. +%if 0%{?released_kernel} +%define vanillaversion 5.%{base_sublevel} +# non-released_kernel case +%else +%if 0%{?rcrev} +%define vanillaversion 5.%{upstream_sublevel}-rc%{rcrev} +%if 0%{?gitrev} +%define vanillaversion 5.%{upstream_sublevel}-rc%{rcrev}-git%{gitrev} +%endif +%else +# pre-{base_sublevel+1}-rc1 case +%if 0%{?gitrev} +%define vanillaversion 5.%{base_sublevel}-git%{gitrev} +%else +%define vanillaversion 5.%{base_sublevel} +%endif +%endif +%endif + +# %%{vanillaversion} : the full version name, e.g. 2.6.35-rc6-git3 +# %%{kversion} : the base version, e.g. 2.6.34 + +# Use kernel-%%{kversion}%%{?dist} as the top-level directory name +# so we can prep different trees within a single git directory. + +# Build a list of the other top-level kernel tree directories. +# This will be used to hardlink identical vanilla subdirs. +sharedirs=$(find "$PWD" -maxdepth 1 -type d -name 'kernel-5.*' \ + | grep -x -v "$PWD"/kernel-%{kversion}%{?dist}) ||: + +# Delete all old stale trees. +if [ -d kernel-%{kversion}%{?dist} ]; then + cd kernel-%{kversion}%{?dist} + for i in linux-* + do + if [ -d $i ]; then + # Just in case we ctrl-c'd a prep already + rm -rf deleteme.%{_target_cpu} + # Move away the stale away, and delete in background. + mv $i deleteme-$i + rm -rf deleteme* & + fi + done + cd .. +fi + +# Generate new tree +if [ ! -d kernel-%{kversion}%{?dist}/vanilla-%{vanillaversion} ]; then + + if [ -d kernel-%{kversion}%{?dist}/vanilla-%{kversion} ]; then + + # The base vanilla version already exists. + cd kernel-%{kversion}%{?dist} + + # Any vanilla-* directories other than the base one are stale. + for dir in vanilla-*; do + [ "$dir" = vanilla-%{kversion} ] || rm -rf $dir & + done + + else + + rm -f pax_global_header + # Look for an identical base vanilla dir that can be hardlinked. + for sharedir in $sharedirs ; do + if [[ ! -z $sharedir && -d $sharedir/vanilla-%{kversion} ]] ; then + break + fi + done + if [[ ! -z $sharedir && -d $sharedir/vanilla-%{kversion} ]] ; then +%setup -q -n kernel-%{kversion}%{?dist} -c -T + cp -al $sharedir/vanilla-%{kversion} . + else +%setup -q -n kernel-%{kversion}%{?dist} -c + mv linux-%{kversion} vanilla-%{kversion} + fi + + fi + +%if "%{kversion}" != "%{vanillaversion}" + + for sharedir in $sharedirs ; do + if [[ ! -z $sharedir && -d $sharedir/vanilla-%{vanillaversion} ]] ; then + break + fi + done + if [[ ! -z $sharedir && -d $sharedir/vanilla-%{vanillaversion} ]] ; then + + cp -al $sharedir/vanilla-%{vanillaversion} . + + else + + # Need to apply patches to the base vanilla version. + cp -al vanilla-%{kversion} vanilla-%{vanillaversion} + cd vanilla-%{vanillaversion} + +cp %{SOURCE12} . + +# Update vanilla to the latest upstream. +# (non-released_kernel case only) +%if 0%{?rcrev} + xzcat %{SOURCE5000} | patch -p1 -F1 -s +%if 0%{?gitrev} + xzcat %{SOURCE5001} | patch -p1 -F1 -s +%endif +%else +# pre-{base_sublevel+1}-rc1 case +%if 0%{?gitrev} + xzcat %{SOURCE5000} | patch -p1 -F1 -s +%endif +%endif + git init + git config user.email "kernel-team@fedoraproject.org" + git config user.name "Fedora Kernel Team" + git config gc.auto 0 + git add . + git commit -a -q -m "baseline" + + cd .. + + fi + +%endif + +else + + # We already have all vanilla dirs, just change to the top-level directory. + cd kernel-%{kversion}%{?dist} + +fi + +# Now build the fedora kernel tree. +cp -al vanilla-%{vanillaversion} linux-%{KVERREL} + +cd linux-%{KVERREL} +if [ ! -d .git ]; then + git init + git config user.email "kernel-team@fedoraproject.org" + git config user.name "Fedora Kernel Team" + git config gc.auto 0 + git add . + git commit -a -q -m "baseline" +fi + + +# released_kernel with possible stable updates +%if 0%{?stable_base} +# This is special because the kernel spec is hell and nothing is consistent +xzcat %{SOURCE5000} | patch -p1 -F1 -s +git commit -a -m "Stable update" +%endif + +# Note: Even in the "nopatches" path some patches (build tweaks and compile +# fixes) will always get applied; see patch defition above for details + +git am --ignore-space-change --ignore-whitespace --whitespace=fix %{patches} + +# END OF PATCH APPLICATIONS + +# Any further pre-build tree manipulations happen here. + +chmod +x scripts/checkpatch.pl +mv COPYING COPYING-%{version}-%{release} + +# This Prevents scripts/setlocalversion from mucking with our version numbers. +touch .scmversion + +# Mangle /usr/bin/python shebangs to /usr/bin/python3 +# Mangle all Python shebangs to be Python 3 explicitly +# -p preserves timestamps +# -n prevents creating ~backup files +# -i specifies the interpreter for the shebang +# This fixes errors such as +# *** ERROR: ambiguous python shebang in /usr/bin/kvm_stat: #!/usr/bin/python. Change it to python3 (or python2) explicitly. +# We patch all sources below for which we got a report/error. +pathfix.py -i "%{__python3} %{py3_shbang_opts}" -p -n \ + tools/kvm/kvm_stat/kvm_stat \ + scripts/show_delta \ + scripts/diffconfig \ + scripts/bloat-o-meter \ + scripts/jobserver-exec \ + tools/perf/tests/attr.py \ + tools/perf/scripts/python/stat-cpi.py \ + tools/perf/scripts/python/sched-migration.py \ + Documentation \ + scripts/gen_compile_commands.py + +# only deal with configs if we are going to build for the arch +%ifnarch %nobuildarches + +if [ -L configs ]; then + rm -f configs +fi +# Deal with configs stuff +mkdir configs +cd configs + +# Drop some necessary files from the source dir into the buildroot +cp $RPM_SOURCE_DIR/kernel-*.config . +cp %{SOURCE1000} . +cp %{SOURCE55} . +cp %{SOURCE51} . +VERSION=%{version} ./generate_all_configs.sh %{primary_target} %{debugbuildsenabled} + + +# Merge in any user-provided local config option changes +%ifnarch %nobuildarches +for i in %{all_arch_configs} +do + mv $i $i.tmp + ./merge.pl %{SOURCE1000} $i.tmp > $i + rm $i.tmp +done +%endif + +%if !%{debugbuildsenabled} +rm -f kernel-%{version}-*debug.config +%endif + +# enable GCOV kernel config options if gcov is on +%if %{with_gcov} +for i in *.config +do + sed -i 's/# CONFIG_GCOV_KERNEL is not set/CONFIG_GCOV_KERNEL=y\nCONFIG_GCOV_PROFILE_ALL=y\n/' $i +done +%endif + +cp %{SOURCE52} . +OPTS="" +%if %{with_configchecks} + OPTS="$OPTS -w -n -c" +%endif +./process_configs.sh $OPTS kernel %{rpmversion} + +cp %{SOURCE56} . +RPM_SOURCE_DIR=$RPM_SOURCE_DIR ./update_scripts.sh %{primary_target} + +# end of kernel config +%endif + +cd .. +# # End of Configs stuff + +# get rid of unwanted files resulting from patch fuzz +find . \( -name "*.orig" -o -name "*~" \) -delete >/dev/null + +# remove unnecessary SCM files +find . -name .gitignore -delete >/dev/null + +cd .. + +### +### build +### +%build + +%if %{with_sparse} +%define sparse_mflags C=1 +%endif + +cp_vmlinux() +{ + eu-strip --remove-comment -o "$2" "$1" +} + +# These are for host programs that get built as part of the kernel and +# are required to be packaged in kernel-devel for building external modules. +# Since they are userspace binaries, they are required to pickup the hardening +# flags defined in the macros. The --build-id=uuid is a trick to get around +# debuginfo limitations: Typically, find-debuginfo.sh will update the build +# id of all binaries to allow for parllel debuginfo installs. The kernel +# can't use this because it breaks debuginfo for the vDSO so we have to +# use a special mechanism for kernel and modules to be unique. Unfortunately, +# we still have userspace binaries which need unique debuginfo and because +# they come from the kernel package, we can't just use find-debuginfo.sh to +# rewrite only those binaries. The easiest option right now is just to have +# the build id be a uuid for the host programs. +# +# Note we need to disable these flags for cross builds because the flags +# from redhat-rpm-config assume that host == target so target arch +# flags cause issues with the host compiler. +%if !%{with_cross} +%define build_hostcflags %{?build_cflags} +%define build_hostldflags %{?build_ldflags} +%endif + +%define make make %{?cross_opts} %{?make_opts} HOSTCFLAGS="%{?build_hostcflags}" HOSTLDFLAGS="%{?build_hostldflags}" + +BuildKernel() { + MakeTarget=$1 + KernelImage=$2 + Flavour=$4 + DoVDSO=$3 + Flav=${Flavour:++${Flavour}} + InstallName=${5:-vmlinuz} + + DoModules=1 + if [ "$Flavour" = "zfcpdump" ]; then + DoModules=0 + fi + + # Pick the right config file for the kernel we're building + Config=kernel-%{version}-%{_target_cpu}${Flavour:+-${Flavour}}.config + DevelDir=/usr/src/kernels/%{KVERREL}${Flav} + + # When the bootable image is just the ELF kernel, strip it. + # We already copy the unstripped file into the debuginfo package. + if [ "$KernelImage" = vmlinux ]; then + CopyKernel=cp_vmlinux + else + CopyKernel=cp + fi + + KernelVer=%{version}-%{release}.%{_target_cpu}${Flav} + echo BUILDING A KERNEL FOR ${Flavour} %{_target_cpu}... + + %if 0%{?stable_update} + # make sure SUBLEVEL is incremented on a stable release. Sigh 3.x. + perl -p -i -e "s/^SUBLEVEL.*/SUBLEVEL = %{?stablerev}/" Makefile + %endif + + # make sure EXTRAVERSION says what we want it to say + perl -p -i -e "s/^EXTRAVERSION.*/EXTRAVERSION = -%{release}.%{_target_cpu}${Flav}/" Makefile + + # if pre-rc1 devel kernel, must fix up PATCHLEVEL for our versioning scheme + %if !0%{?rcrev} + %if 0%{?gitrev} + perl -p -i -e 's/^PATCHLEVEL.*/PATCHLEVEL = %{upstream_sublevel}/' Makefile + %endif + %endif + + # and now to start the build process + + %{make} %{?_smp_mflags} mrproper + cp configs/$Config .config + + %if %{signkernel}%{signmodules} + cp $RPM_SOURCE_DIR/x509.genkey certs/. + %endif + + Arch=`head -1 .config | cut -b 3-` + echo USING ARCH=$Arch + + KCFLAGS="%{?kcflags}" + + # add kpatch flags for base kernel + if [ "$Flavour" == "" ]; then + KCFLAGS="$KCFLAGS %{?kpatch_kcflags}" + fi + + %{make} ARCH=$Arch olddefconfig >/dev/null + + # This ensures build-ids are unique to allow parallel debuginfo + perl -p -i -e "s/^CONFIG_BUILD_SALT.*/CONFIG_BUILD_SALT=\"%{KVERREL}\"/" .config + %{make} ARCH=$Arch KCFLAGS="$KCFLAGS" WITH_GCOV="%{?with_gcov}" %{?_smp_mflags} $MakeTarget %{?sparse_mflags} %{?kernel_mflags} + if [ $DoModules -eq 1 ]; then + %{make} ARCH=$Arch KCFLAGS="$KCFLAGS" WITH_GCOV="%{?with_gcov}" %{?_smp_mflags} modules %{?sparse_mflags} || exit 1 + fi + + mkdir -p $RPM_BUILD_ROOT/%{image_install_path} + mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer +%if %{with_debuginfo} + mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/%{image_install_path} +%endif + +%ifarch %{arm} aarch64 + %{make} ARCH=$Arch dtbs INSTALL_DTBS_PATH=$RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer + %{make} ARCH=$Arch dtbs_install INSTALL_DTBS_PATH=$RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer + cp -r $RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer $RPM_BUILD_ROOT/lib/modules/$KernelVer/dtb + find arch/$Arch/boot/dts -name '*.dtb' -type f -delete +%endif + + # Start installing the results + install -m 644 .config $RPM_BUILD_ROOT/boot/config-$KernelVer + install -m 644 .config $RPM_BUILD_ROOT/lib/modules/$KernelVer/config + install -m 644 System.map $RPM_BUILD_ROOT/boot/System.map-$KernelVer + install -m 644 System.map $RPM_BUILD_ROOT/lib/modules/$KernelVer/System.map + + # We estimate the size of the initramfs because rpm needs to take this size + # into consideration when performing disk space calculations. (See bz #530778) + dd if=/dev/zero of=$RPM_BUILD_ROOT/boot/initramfs-$KernelVer.img bs=1M count=20 + + if [ -f arch/$Arch/boot/zImage.stub ]; then + cp arch/$Arch/boot/zImage.stub $RPM_BUILD_ROOT/%{image_install_path}/zImage.stub-$KernelVer || : + cp arch/$Arch/boot/zImage.stub $RPM_BUILD_ROOT/lib/modules/$KernelVer/zImage.stub-$KernelVer || : + fi + + %if %{signkernel} + if [ "$KernelImage" = vmlinux ]; then + # We can't strip and sign $KernelImage in place, because + # we need to preserve original vmlinux for debuginfo. + # Use a copy for signing. + $CopyKernel $KernelImage $KernelImage.tosign + KernelImage=$KernelImage.tosign + CopyKernel=cp + fi + + # Sign the image if we're using EFI + # aarch64 kernels are gziped EFI images + KernelExtension=${KernelImage##*.} + if [ "$KernelExtension" == "gz" ]; then + SignImage=${KernelImage%.*} + else + SignImage=$KernelImage + fi + + %ifarch x86_64 aarch64 + %pesign -s -i $SignImage -o vmlinuz.signed -a %{secureboot_ca} -c %{secureboot_key} -n %{pesign_name} + %endif + %ifarch s390x ppc64le + if [ -x /usr/bin/rpm-sign ]; then + rpm-sign --key "%{pesign_name}" --lkmsign $SignImage --output vmlinuz.signed + elif [ $DoModules -eq 1 ]; then + chmod +x scripts/sign-file + ./scripts/sign-file -p sha256 certs/signing_key.pem certs/signing_key.x509 $SignImage vmlinuz.signed + else + mv $SignImage vmlinuz.signed + fi + %endif + + if [ ! -s vmlinuz.signed ]; then + echo "pesigning failed" + exit 1 + fi + mv vmlinuz.signed $SignImage + if [ "$KernelExtension" == "gz" ]; then + gzip -f9 $SignImage + fi + # signkernel + %endif + + $CopyKernel $KernelImage \ + $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer + chmod 755 $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer + cp $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer $RPM_BUILD_ROOT/lib/modules/$KernelVer/$InstallName + + # hmac sign the kernel for FIPS + echo "Creating hmac file: $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac" + ls -l $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer + sha512hmac $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer | sed -e "s,$RPM_BUILD_ROOT,," > $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac; + cp $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac $RPM_BUILD_ROOT/lib/modules/$KernelVer/.vmlinuz.hmac + + if [ $DoModules -eq 1 ]; then + # Override $(mod-fw) because we don't want it to install any firmware + # we'll get it from the linux-firmware package and we don't want conflicts + %{make} %{?_smp_mflags} ARCH=$Arch INSTALL_MOD_PATH=$RPM_BUILD_ROOT %{?_smp_mflags} modules_install KERNELRELEASE=$KernelVer mod-fw= + fi + +%if %{with_gcov} + # install gcov-needed files to $BUILDROOT/$BUILD/...: + # gcov_info->filename is absolute path + # gcno references to sources can use absolute paths (e.g. in out-of-tree builds) + # sysfs symlink targets (set up at compile time) use absolute paths to BUILD dir + find . \( -name '*.gcno' -o -name '*.[chS]' \) -exec install -D '{}' "$RPM_BUILD_ROOT/$(pwd)/{}" \; +%endif + + # add an a noop %%defattr statement 'cause rpm doesn't like empty file list files + echo '%%defattr(-,-,-)' > ../kernel${Flavour:+-${Flavour}}-ldsoconf.list + if [ $DoVDSO -ne 0 ]; then + %{make} ARCH=$Arch INSTALL_MOD_PATH=$RPM_BUILD_ROOT vdso_install KERNELRELEASE=$KernelVer + if [ -s ldconfig-kernel.conf ]; then + install -D -m 444 ldconfig-kernel.conf \ + $RPM_BUILD_ROOT/etc/ld.so.conf.d/kernel-$KernelVer.conf + echo /etc/ld.so.conf.d/kernel-$KernelVer.conf >> ../kernel${Flavour:+-${Flavour}}-ldsoconf.list + fi + + rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/vdso/.build-id + fi + + # And save the headers/makefiles etc for building modules against + # + # This all looks scary, but the end result is supposed to be: + # * all arch relevant include/ files + # * all Makefile/Kconfig files + # * all script/ files + + rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build + rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/source + mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build + (cd $RPM_BUILD_ROOT/lib/modules/$KernelVer ; ln -s build source) + # dirs for additional modules per module-init-tools, kbuild/modules.txt + mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/extra + mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/internal + mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/updates +%if 0%{!?fedora:1} + mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/weak-updates +%endif + # CONFIG_KERNEL_HEADER_TEST generates some extra files in the process of + # testing so just delete + find . -name *.h.s -delete + # first copy everything + cp --parents `find -type f -name "Makefile*" -o -name "Kconfig*"` $RPM_BUILD_ROOT/lib/modules/$KernelVer/build + cp Module.symvers $RPM_BUILD_ROOT/lib/modules/$KernelVer/build + cp System.map $RPM_BUILD_ROOT/lib/modules/$KernelVer/build + if [ -s Module.markers ]; then + cp Module.markers $RPM_BUILD_ROOT/lib/modules/$KernelVer/build + fi + + # create the kABI metadata for use in packaging + # NOTENOTE: the name symvers is used by the rpm backend + # NOTENOTE: to discover and run the /usr/lib/rpm/fileattrs/kabi.attr + # NOTENOTE: script which dynamically adds exported kernel symbol + # NOTENOTE: checksums to the rpm metadata provides list. + # NOTENOTE: if you change the symvers name, update the backend too + echo "**** GENERATING kernel ABI metadata ****" + gzip -c9 < Module.symvers > $RPM_BUILD_ROOT/boot/symvers-$KernelVer.gz + cp $RPM_BUILD_ROOT/boot/symvers-$KernelVer.gz $RPM_BUILD_ROOT/lib/modules/$KernelVer/symvers.gz + +%if %{with_kabichk} + echo "**** kABI checking is enabled in kernel SPEC file. ****" + chmod 0755 $RPM_SOURCE_DIR/check-kabi + if [ -e $RPM_SOURCE_DIR/Module.kabi_%{_target_cpu}$Flavour ]; then + cp $RPM_SOURCE_DIR/Module.kabi_%{_target_cpu}$Flavour $RPM_BUILD_ROOT/Module.kabi + $RPM_SOURCE_DIR/check-kabi -k $RPM_BUILD_ROOT/Module.kabi -s Module.symvers || exit 1 + # for now, don't keep it around. + rm $RPM_BUILD_ROOT/Module.kabi + else + echo "**** NOTE: Cannot find reference Module.kabi file. ****" + fi +%endif + +%if %{with_kabidupchk} + echo "**** kABI DUP checking is enabled in kernel SPEC file. ****" + if [ -e $RPM_SOURCE_DIR/Module.kabi_dup_%{_target_cpu}$Flavour ]; then + cp $RPM_SOURCE_DIR/Module.kabi_dup_%{_target_cpu}$Flavour $RPM_BUILD_ROOT/Module.kabi + $RPM_SOURCE_DIR/check-kabi -k $RPM_BUILD_ROOT/Module.kabi -s Module.symvers || exit 1 + # for now, don't keep it around. + rm $RPM_BUILD_ROOT/Module.kabi + else + echo "**** NOTE: Cannot find DUP reference Module.kabi file. ****" + fi +%endif + +%if %{with_kabidw_base} + # Don't build kabi base for debug kernels + if [ "$Flavour" != "kdump" -a "$Flavour" != "debug" ]; then + mkdir -p $RPM_BUILD_ROOT/kabi-dwarf + tar xjvf %{SOURCE301} -C $RPM_BUILD_ROOT/kabi-dwarf + + mkdir -p $RPM_BUILD_ROOT/kabi-dwarf/whitelists + tar xjvf %{SOURCE300} -C $RPM_BUILD_ROOT/kabi-dwarf/whitelists + + echo "**** GENERATING DWARF-based kABI baseline dataset ****" + chmod 0755 $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh + $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh generate \ + "$RPM_BUILD_ROOT/kabi-dwarf/whitelists/kabi-current/kabi_whitelist_%{_target_cpu}" \ + "$(pwd)" \ + "$RPM_BUILD_ROOT/kabidw-base/%{_target_cpu}${Flavour:+.${Flavour}}" || : + + rm -rf $RPM_BUILD_ROOT/kabi-dwarf + fi +%endif + +%if %{with_kabidwchk} + if [ "$Flavour" != "kdump" ]; then + mkdir -p $RPM_BUILD_ROOT/kabi-dwarf + tar xjvf %{SOURCE301} -C $RPM_BUILD_ROOT/kabi-dwarf + if [ -d "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Flavour:+.${Flavour}}" ]; then + mkdir -p $RPM_BUILD_ROOT/kabi-dwarf/whitelists + tar xjvf %{SOURCE300} -C $RPM_BUILD_ROOT/kabi-dwarf/whitelists + + echo "**** GENERATING DWARF-based kABI dataset ****" + chmod 0755 $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh + $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh generate \ + "$RPM_BUILD_ROOT/kabi-dwarf/whitelists/kabi-current/kabi_whitelist_%{_target_cpu}" \ + "$(pwd)" \ + "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Flavour:+.${Flavour}}.tmp" || : + + echo "**** kABI DWARF-based comparison report ****" + $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh compare \ + "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Flavour:+.${Flavour}}" \ + "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Flavour:+.${Flavour}}.tmp" || : + echo "**** End of kABI DWARF-based comparison report ****" + else + echo "**** Baseline dataset for kABI DWARF-BASED comparison report not found ****" + fi + + rm -rf $RPM_BUILD_ROOT/kabi-dwarf + fi +%endif + + # then drop all but the needed Makefiles/Kconfig files + rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts + rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include + cp .config $RPM_BUILD_ROOT/lib/modules/$KernelVer/build + cp -a scripts $RPM_BUILD_ROOT/lib/modules/$KernelVer/build + rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/tracing + rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/spdxcheck.py + if [ -f tools/objtool/objtool ]; then + cp -a tools/objtool/objtool $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/objtool/ || : + fi + if [ -d arch/$Arch/scripts ]; then + cp -a arch/$Arch/scripts $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/arch/%{_arch} || : + fi + if [ -f arch/$Arch/*lds ]; then + cp -a arch/$Arch/*lds $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/arch/%{_arch}/ || : + fi + if [ -f arch/%{asmarch}/kernel/module.lds ]; then + cp -a --parents arch/%{asmarch}/kernel/module.lds $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ + fi + rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/*.o + rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/*/*.o +%ifarch ppc64le + cp -a --parents arch/powerpc/lib/crtsavres.[So] $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ +%endif + if [ -d arch/%{asmarch}/include ]; then + cp -a --parents arch/%{asmarch}/include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ + fi +%ifarch aarch64 + # arch/arm64/include/asm/xen references arch/arm + cp -a --parents arch/arm/include/asm/xen $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ + # arch/arm64/include/asm/opcodes.h references arch/arm + cp -a --parents arch/arm/include/asm/opcodes.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ +%endif + # include the machine specific headers for ARM variants, if available. +%ifarch %{arm} + if [ -d arch/%{asmarch}/mach-${Flavour}/include ]; then + cp -a --parents arch/%{asmarch}/mach-${Flavour}/include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ + fi + # include a few files for 'make prepare' + cp -a --parents arch/arm/tools/gen-mach-types $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ + cp -a --parents arch/arm/tools/mach-types $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ + +%endif + cp -a include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include +%ifarch i686 x86_64 + # files for 'make prepare' to succeed with kernel-devel + cp -a --parents arch/x86/entry/syscalls/syscall_32.tbl $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ + cp -a --parents arch/x86/entry/syscalls/syscalltbl.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ + cp -a --parents arch/x86/entry/syscalls/syscallhdr.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ + cp -a --parents arch/x86/entry/syscalls/syscall_64.tbl $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ + cp -a --parents arch/x86/tools/relocs_32.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ + cp -a --parents arch/x86/tools/relocs_64.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ + cp -a --parents arch/x86/tools/relocs.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ + cp -a --parents arch/x86/tools/relocs_common.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ + cp -a --parents arch/x86/tools/relocs.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ + cp -a --parents tools/include/tools/le_byteshift.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ + cp -a --parents arch/x86/purgatory/purgatory.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ + cp -a --parents arch/x86/purgatory/stack.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ + cp -a --parents arch/x86/purgatory/setup-x86_64.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ + cp -a --parents arch/x86/purgatory/entry64.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ + cp -a --parents arch/x86/boot/string.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ + cp -a --parents arch/x86/boot/string.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ + cp -a --parents arch/x86/boot/ctype.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ +%endif + # Make sure the Makefile and version.h have a matching timestamp so that + # external modules can be built + touch -r $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/Makefile $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/generated/uapi/linux/version.h + + # Copy .config to include/config/auto.conf so "make prepare" is unnecessary. + cp $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/.config $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/config/auto.conf + +%if %{with_debuginfo} + eu-readelf -n vmlinux | grep "Build ID" | awk '{print $NF}' > vmlinux.id + cp vmlinux.id $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/vmlinux.id + + # + # save the vmlinux file for kernel debugging into the kernel-debuginfo rpm + # + mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer + cp vmlinux $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer +%endif + + find $RPM_BUILD_ROOT/lib/modules/$KernelVer -name "*.ko" -type f >modnames + + # mark modules executable so that strip-to-file can strip them + xargs --no-run-if-empty chmod u+x < modnames + + # Generate a list of modules for block and networking. + + grep -F /drivers/ modnames | xargs --no-run-if-empty nm -upA | + sed -n 's,^.*/\([^/]*\.ko\): *U \(.*\)$,\1 \2,p' > drivers.undef + + collect_modules_list() + { + sed -r -n -e "s/^([^ ]+) \\.?($2)\$/\\1/p" drivers.undef | + LC_ALL=C sort -u > $RPM_BUILD_ROOT/lib/modules/$KernelVer/modules.$1 + if [ ! -z "$3" ]; then + sed -r -e "/^($3)\$/d" -i $RPM_BUILD_ROOT/lib/modules/$KernelVer/modules.$1 + fi + } + + collect_modules_list networking \ + 'register_netdev|ieee80211_register_hw|usbnet_probe|phy_driver_register|rt(l_|2x00)(pci|usb)_probe|register_netdevice' + collect_modules_list block \ + 'ata_scsi_ioctl|scsi_add_host|scsi_add_host_with_dma|blk_alloc_queue|blk_init_queue|register_mtd_blktrans|scsi_esp_register|scsi_register_device_handler|blk_queue_physical_block_size' 'pktcdvd.ko|dm-mod.ko' + collect_modules_list drm \ + 'drm_open|drm_init' + collect_modules_list modesetting \ + 'drm_crtc_init' + + # detect missing or incorrect license tags + ( find $RPM_BUILD_ROOT/lib/modules/$KernelVer -name '*.ko' | xargs /sbin/modinfo -l | \ + grep -E -v 'GPL( v2)?$|Dual BSD/GPL$|Dual MPL/GPL$|GPL and additional rights$' ) && exit 1 + + # remove files that will be auto generated by depmod at rpm -i time + pushd $RPM_BUILD_ROOT/lib/modules/$KernelVer/ + rm -f modules.{alias*,builtin.bin,dep*,*map,symbols*,devname,softdep} + popd + + # Call the modules-extra script to move things around + %{SOURCE17} $RPM_BUILD_ROOT/lib/modules/$KernelVer $RPM_SOURCE_DIR/mod-extra.list + # Blacklist net autoloadable modules in modules-extra + %{SOURCE19} $RPM_BUILD_ROOT lib/modules/$KernelVer + # Call the modules-extra script for internal modules + %{SOURCE17} $RPM_BUILD_ROOT/lib/modules/$KernelVer %{SOURCE54} internal + + # + # Generate the kernel-core and kernel-modules files lists + # + + # Copy the System.map file for depmod to use, and create a backup of the + # full module tree so we can restore it after we're done filtering + cp System.map $RPM_BUILD_ROOT/. + pushd $RPM_BUILD_ROOT + mkdir restore + cp -r lib/modules/$KernelVer/* restore/. + + # don't include anything going into k-m-e and k-m-i in the file lists + rm -rf lib/modules/$KernelVer/{extra,internal} + + if [ $DoModules -eq 1 ]; then + # Find all the module files and filter them out into the core and + # modules lists. This actually removes anything going into -modules + # from the dir. + find lib/modules/$KernelVer/kernel -name *.ko | sort -n > modules.list + cp $RPM_SOURCE_DIR/filter-*.sh . + ./filter-modules.sh modules.list %{_target_cpu} + rm filter-*.sh + + # Run depmod on the resulting module tree and make sure it isn't broken + depmod -b . -aeF ./System.map $KernelVer &> depmod.out + if [ -s depmod.out ]; then + echo "Depmod failure" + cat depmod.out + exit 1 + else + rm depmod.out + fi + else + # Ensure important files/directories exist to let the packaging succeed + echo '%%defattr(-,-,-)' > modules.list + echo '%%defattr(-,-,-)' > k-d.list + mkdir -p lib/modules/$KernelVer/kernel + # Add files usually created by make modules, needed to prevent errors + # thrown by depmod during package installation + touch lib/modules/$KernelVer/modules.order + touch lib/modules/$KernelVer/modules.builtin + fi + + # remove files that will be auto generated by depmod at rpm -i time + pushd $RPM_BUILD_ROOT/lib/modules/$KernelVer/ + rm -f modules.{alias*,builtin.bin,dep*,*map,symbols*,devname,softdep} + popd + + # Go back and find all of the various directories in the tree. We use this + # for the dir lists in kernel-core + find lib/modules/$KernelVer/kernel -mindepth 1 -type d | sort -n > module-dirs.list + + # Cleanup + rm System.map + cp -r restore/* lib/modules/$KernelVer/. + rm -rf restore + popd + + # Make sure the files lists start with absolute paths or rpmbuild fails. + # Also add in the dir entries + sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/k-d.list > ../kernel${Flavour:+-${Flavour}}-modules.list + sed -e 's/^lib*/%dir \/lib/' %{?zipsed} $RPM_BUILD_ROOT/module-dirs.list > ../kernel${Flavour:+-${Flavour}}-core.list + sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/modules.list >> ../kernel${Flavour:+-${Flavour}}-core.list + + # Cleanup + rm -f $RPM_BUILD_ROOT/k-d.list + rm -f $RPM_BUILD_ROOT/modules.list + rm -f $RPM_BUILD_ROOT/module-dirs.list + +%if %{signmodules} + if [ $DoModules -eq 1 ]; then + # Save the signing keys so we can sign the modules in __modsign_install_post + cp certs/signing_key.pem certs/signing_key.pem.sign${Flav} + cp certs/signing_key.x509 certs/signing_key.x509.sign${Flav} + fi +%endif + + # Move the devel headers out of the root file system + mkdir -p $RPM_BUILD_ROOT/usr/src/kernels + mv $RPM_BUILD_ROOT/lib/modules/$KernelVer/build $RPM_BUILD_ROOT/$DevelDir + + # This is going to create a broken link during the build, but we don't use + # it after this point. We need the link to actually point to something + # when kernel-devel is installed, and a relative link doesn't work across + # the F17 UsrMove feature. + ln -sf $DevelDir $RPM_BUILD_ROOT/lib/modules/$KernelVer/build + + # prune junk from kernel-devel + find $RPM_BUILD_ROOT/usr/src/kernels -name ".*.cmd" -delete + + # build a BLS config for this kernel + %{SOURCE53} "$KernelVer" "$RPM_BUILD_ROOT" "%{?variant}" + + # Red Hat UEFI Secure Boot CA cert, which can be used to authenticate the kernel + mkdir -p $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer + install -m 0644 %{secureboot_ca} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca.cer + %ifarch s390x ppc64le + if [ $DoModules -eq 1 ]; then + if [ -x /usr/bin/rpm-sign ]; then + install -m 0644 %{secureboot_key} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename} + else + install -m 0644 certs/signing_key.x509.sign${Flav} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca.cer + openssl x509 -in certs/signing_key.pem.sign${Flav} -outform der -out $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename} + chmod 0644 $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename} + fi + fi + %endif + +%if %{with_ipaclones} + MAXPROCS=$(echo %{?_smp_mflags} | sed -n 's/-j\s*\([0-9]\+\)/\1/p') + if [ -z "$MAXPROCS" ]; then + MAXPROCS=1 + fi + if [ "$Flavour" == "" ]; then + mkdir -p $RPM_BUILD_ROOT/$DevelDir-ipaclones + find . -name '*.ipa-clones' | xargs -i{} -r -n 1 -P $MAXPROCS install -m 644 -D "{}" "$RPM_BUILD_ROOT/$DevelDir-ipaclones/{}" + fi +%endif + +} + +### +# DO it... +### + +# prepare directories +rm -rf $RPM_BUILD_ROOT +mkdir -p $RPM_BUILD_ROOT/boot +mkdir -p $RPM_BUILD_ROOT%{_libexecdir} + +cd linux-%{KVERREL} + + +%if %{with_debug} +BuildKernel %make_target %kernel_image %{_use_vdso} debug +%endif + +%if %{with_zfcpdump} +BuildKernel %make_target %kernel_image %{_use_vdso} zfcpdump +%endif + +%if %{with_pae} +BuildKernel %make_target %kernel_image %{use_vdso} lpae +%endif + +%if %{with_up} +BuildKernel %make_target %kernel_image %{_use_vdso} +%endif + +%global perf_make \ + make -s EXTRA_CFLAGS="${RPM_OPT_FLAGS}" LDFLAGS="%{__global_ldflags}" %{?cross_opts} -C tools/perf V=1 NO_PERF_READ_VDSO32=1 NO_PERF_READ_VDSOX32=1 WERROR=0 NO_LIBUNWIND=1 HAVE_CPLUS_DEMANGLE=1 NO_GTK2=1 NO_STRLCPY=1 NO_BIONIC=1 prefix=%{_prefix} PYTHON=%{__python3} +%if %{with_perf} +# perf +# make sure check-headers.sh is executable +chmod +x tools/perf/check-headers.sh +%{perf_make} DESTDIR=$RPM_BUILD_ROOT all +%endif + +%global tools_make \ + %{make} CFLAGS="${RPM_OPT_FLAGS}" LDFLAGS="%{__global_ldflags}" V=1 + +%if %{with_tools} +%ifarch %{cpupowerarchs} +# cpupower +# make sure version-gen.sh is executable. +chmod +x tools/power/cpupower/utils/version-gen.sh +%{tools_make} %{?_smp_mflags} -C tools/power/cpupower CPUFREQ_BENCH=false +%ifarch x86_64 + pushd tools/power/cpupower/debug/x86_64 + %{tools_make} %{?_smp_mflags} centrino-decode powernow-k8-decode + popd +%endif +%ifarch x86_64 + pushd tools/power/x86/x86_energy_perf_policy/ + %{tools_make} + popd + pushd tools/power/x86/turbostat + %{tools_make} + popd + pushd tools/power/x86/intel-speed-select + %{make} + popd +%endif +%endif +pushd tools/thermal/tmon/ +%{tools_make} +popd +pushd tools/iio/ +%{make} +popd +pushd tools/gpio/ +%{make} +popd +%endif + +%global bpftool_make \ + make EXTRA_CFLAGS="${RPM_OPT_FLAGS}" EXTRA_LDFLAGS="%{__global_ldflags}" DESTDIR=$RPM_BUILD_ROOT V=1 +%if %{with_bpftool} +pushd tools/bpf/bpftool +%{bpftool_make} +popd +%endif + +%if %{with_selftests} +%{make} -s ARCH=$Arch V=1 samples/bpf/ +pushd tools/testing/selftests +# We need to install here because we need to call make with ARCH set which +# doesn't seem possible to do in the install section. +%{make} -s ARCH=$Arch V=1 TARGETS="bpf livepatch net" INSTALL_PATH=%{buildroot}%{_libexecdir}/kselftests install +popd +%endif + +%if %{with_doc} +# Make the HTML pages. +make PYTHON=/usr/bin/python3 htmldocs || %{doc_build_fail} + +# sometimes non-world-readable files sneak into the kernel source tree +chmod -R a=rX Documentation +find Documentation -type d | xargs chmod u+w +%endif + +# In the modsign case, we do 3 things. 1) We check the "flavour" and hard +# code the value in the following invocations. This is somewhat sub-optimal +# but we're doing this inside of an RPM macro and it isn't as easy as it +# could be because of that. 2) We restore the .tmp_versions/ directory from +# the one we saved off in BuildKernel above. This is to make sure we're +# signing the modules we actually built/installed in that flavour. 3) We +# grab the arch and invoke mod-sign.sh command to actually sign the modules. +# +# We have to do all of those things _after_ find-debuginfo runs, otherwise +# that will strip the signature off of the modules. +# +# Don't sign modules for the zfcpdump flavour as it is monolithic. + +%define __modsign_install_post \ + if [ "%{signmodules}" -eq "1" ]; then \ + if [ "%{with_pae}" -ne "0" ]; then \ + %{modsign_cmd} certs/signing_key.pem.sign+lpae certs/signing_key.x509.sign+lpae $RPM_BUILD_ROOT/lib/modules/%{KVERREL}+lpae/ \ + fi \ + if [ "%{with_debug}" -ne "0" ]; then \ + %{modsign_cmd} certs/signing_key.pem.sign+debug certs/signing_key.x509.sign+debug $RPM_BUILD_ROOT/lib/modules/%{KVERREL}+debug/ \ + fi \ + if [ "%{with_up}" -ne "0" ]; then \ + %{modsign_cmd} certs/signing_key.pem.sign certs/signing_key.x509.sign $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/ \ + fi \ + fi \ + if [ "%{zipmodules}" -eq "1" ]; then \ + find $RPM_BUILD_ROOT/lib/modules/ -type f -name '*.ko' | %{SOURCE79} %{?_smp_mflags}; \ + fi \ +%{nil} + +### +### Special hacks for debuginfo subpackages. +### + +# This macro is used by %%install, so we must redefine it before that. +%define debug_package %{nil} + +%if %{with_debuginfo} + +%ifnarch noarch +%global __debug_package 1 +%files -f debugfiles.list debuginfo-common-%{_target_cpu} +%endif + +%endif + +# We don't want to package debuginfo for self-tests and samples but +# we have to delete them to avoid an error messages about unpackaged +# files. +# Delete the debuginfo for for kernel-devel files +%define __remove_unwanted_dbginfo_install_post \ + if [ "%{with_selftests}" -ne "0" ]; then \ + rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/libexec/ksamples; \ + rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/libexec/kselftests; \ + fi \ + rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/src; \ +%{nil} + +# +# Disgusting hack alert! We need to ensure we sign modules *after* all +# invocations of strip occur, which is in __debug_install_post if +# find-debuginfo.sh runs, and __os_install_post if not. +# +%define __spec_install_post \ + %{?__debug_package:%{__debug_install_post}}\ + %{__arch_install_post}\ + %{__os_install_post}\ + %{__remove_unwanted_dbginfo_install_post}\ + %{__modsign_install_post} + +### +### install +### + +%install + +cd linux-%{KVERREL} + +%if %{with_doc} +docdir=$RPM_BUILD_ROOT%{_datadir}/doc/kernel-doc-%{rpmversion} + +# copy the source over +mkdir -p $docdir +tar -h -f - --exclude=man --exclude='.*' -c Documentation | tar xf - -C $docdir + +# with_doc +%endif + +# We have to do the headers install before the tools install because the +# kernel headers_install will remove any header files in /usr/include that +# it doesn't install itself. + +%if %{with_headers} +# Install kernel headers +make ARCH=%{hdrarch} INSTALL_HDR_PATH=$RPM_BUILD_ROOT/usr headers_install + +find $RPM_BUILD_ROOT/usr/include \ + \( -name .install -o -name .check -o \ + -name ..install.cmd -o -name ..check.cmd \) -delete + +%endif + +%if %{with_cross_headers} +%if 0%{?fedora} +HDR_ARCH_LIST='arm arm64 powerpc s390 x86' +%else +HDR_ARCH_LIST='arm64 powerpc s390 x86' +%endif +mkdir -p $RPM_BUILD_ROOT/usr/tmp-headers + +for arch in $HDR_ARCH_LIST; do + mkdir $RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch} + make ARCH=${arch} INSTALL_HDR_PATH=$RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch} headers_install +done + +find $RPM_BUILD_ROOT/usr/tmp-headers \ + \( -name .install -o -name .check -o \ + -name ..install.cmd -o -name ..check.cmd \) -delete + +# Copy all the architectures we care about to their respective asm directories +for arch in $HDR_ARCH_LIST ; do + mkdir -p $RPM_BUILD_ROOT/usr/${arch}-linux-gnu/include + mv $RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch}/include/* $RPM_BUILD_ROOT/usr/${arch}-linux-gnu/include/ +done + +rm -rf $RPM_BUILD_ROOT/usr/tmp-headers +%endif + +%if %{with_kernel_abi_whitelists} +# kabi directory +INSTALL_KABI_PATH=$RPM_BUILD_ROOT/lib/modules/ +mkdir -p $INSTALL_KABI_PATH + +# install kabi releases directories +tar xjvf %{SOURCE300} -C $INSTALL_KABI_PATH +# with_kernel_abi_whitelists +%endif + +%if %{with_perf} +# perf tool binary and supporting scripts/binaries +%{perf_make} DESTDIR=$RPM_BUILD_ROOT lib=%{_lib} install-bin install-traceevent-plugins +# remove the 'trace' symlink. +rm -f %{buildroot}%{_bindir}/trace + +# For both of the below, yes, this should be using a macro but right now +# it's hard coded and we don't actually want it anyway right now. +# Whoever wants examples can fix it up! + +# remove examples +rm -rf %{buildroot}/usr/lib/perf/examples +# remove the stray files that somehow got packaged +rm -rf %{buildroot}/usr/lib/perf/include/bpf/bpf.h +rm -rf %{buildroot}/usr/lib/perf/include/bpf/stdio.h +rm -rf %{buildroot}/usr/lib/perf/include/bpf/linux/socket.h +rm -rf %{buildroot}/usr/lib/perf/include/bpf/pid_filter.h +rm -rf %{buildroot}/usr/lib/perf/include/bpf/unistd.h + +# python-perf extension +%{perf_make} DESTDIR=$RPM_BUILD_ROOT install-python_ext + +# perf man pages (note: implicit rpm magic compresses them later) +mkdir -p %{buildroot}/%{_mandir}/man1 +%{perf_make} DESTDIR=$RPM_BUILD_ROOT install-man +%endif + +%if %{with_tools} +%ifarch %{cpupowerarchs} +%{make} -C tools/power/cpupower DESTDIR=$RPM_BUILD_ROOT libdir=%{_libdir} mandir=%{_mandir} CPUFREQ_BENCH=false install +rm -f %{buildroot}%{_libdir}/*.{a,la} +%find_lang cpupower +mv cpupower.lang ../ +%ifarch x86_64 + pushd tools/power/cpupower/debug/x86_64 + install -m755 centrino-decode %{buildroot}%{_bindir}/centrino-decode + install -m755 powernow-k8-decode %{buildroot}%{_bindir}/powernow-k8-decode + popd +%endif +chmod 0755 %{buildroot}%{_libdir}/libcpupower.so* +mkdir -p %{buildroot}%{_unitdir} %{buildroot}%{_sysconfdir}/sysconfig +install -m644 %{SOURCE2000} %{buildroot}%{_unitdir}/cpupower.service +install -m644 %{SOURCE2001} %{buildroot}%{_sysconfdir}/sysconfig/cpupower +%endif +%ifarch x86_64 + mkdir -p %{buildroot}%{_mandir}/man8 + pushd tools/power/x86/x86_energy_perf_policy + %{tools_make} DESTDIR=%{buildroot} install + popd + pushd tools/power/x86/turbostat + %{tools_make} DESTDIR=%{buildroot} install + popd + pushd tools/power/x86/intel-speed-select + %{tools_make} CFLAGS+="-D_GNU_SOURCE -Iinclude" DESTDIR=%{buildroot} install + popd +%endif +pushd tools/thermal/tmon +%{tools_make} INSTALL_ROOT=%{buildroot} install +popd +pushd tools/iio +make DESTDIR=%{buildroot} install +popd +pushd tools/gpio +make DESTDIR=%{buildroot} install +popd +pushd tools/kvm/kvm_stat +make INSTALL_ROOT=%{buildroot} install-tools +make INSTALL_ROOT=%{buildroot} install-man +popd +%endif + +%if %{with_bpftool} +pushd tools/bpf/bpftool +%{bpftool_make} prefix=%{_prefix} bash_compdir=%{_sysconfdir}/bash_completion.d/ mandir=%{_mandir} install doc-install +popd +%endif + +%if %{with_selftests} +pushd samples +install -d %{buildroot}%{_libexecdir}/ksamples +# install bpf samples +pushd bpf +install -d %{buildroot}%{_libexecdir}/ksamples/bpf +find -type f -executable -exec install -m755 {} %{buildroot}%{_libexecdir}/ksamples/bpf \; +install -m755 *.sh %{buildroot}%{_libexecdir}/ksamples/bpf +# test_lwt_bpf.sh compiles test_lwt_bpf.c when run; this works only from the +# kernel tree. Just remove it. +rm %{buildroot}%{_libexecdir}/ksamples/bpf/test_lwt_bpf.sh +install -m644 tcp_bpf.readme %{buildroot}%{_libexecdir}/ksamples/bpf +popd +# install pktgen samples +pushd pktgen +install -d %{buildroot}%{_libexecdir}/ksamples/pktgen +find . -type f -executable -exec install -m755 {} %{buildroot}%{_libexecdir}/ksamples/pktgen/{} \; +find . -type f ! -executable -exec install -m644 {} %{buildroot}%{_libexecdir}/ksamples/pktgen/{} \; +popd +popd +# install drivers/net/mlxsw selftests +pushd tools/testing/selftests/drivers/net/mlxsw +find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \; +find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \; +find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \; +popd +# install net/forwarding selftests +pushd tools/testing/selftests/net/forwarding +find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \; +find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \; +find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \; +popd +# install tc-testing selftests +pushd tools/testing/selftests/tc-testing +find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \; +find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \; +find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \; +popd +# install livepatch selftests +pushd tools/testing/selftests/livepatch +find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \; +find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \; +find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \; +popd +%endif + +# We have to do the headers checksum calculation after the tools install because +# these might end up installing their own set of headers on top of kernel's +%if %{with_headers} +# compute a content hash to export as Provides: kernel-headers-checksum +HEADERS_CHKSUM=$(export LC_ALL=C; find $RPM_BUILD_ROOT/usr/include -type f -name "*.h" \ + ! -path $RPM_BUILD_ROOT/usr/include/linux/version.h | \ + sort | xargs cat | sha1sum - | cut -f 1 -d ' '); +# export the checksum via usr/include/linux/version.h, so the dynamic +# find-provides can grab the hash to update it accordingly +echo "#define KERNEL_HEADERS_CHECKSUM \"$HEADERS_CHKSUM\"" >> $RPM_BUILD_ROOT/usr/include/linux/version.h +%endif + +### +### clean +### + +### +### scripts +### + +%if %{with_tools} +%post -n kernel-tools-libs +/sbin/ldconfig + +%postun -n kernel-tools-libs +/sbin/ldconfig +%endif + +# +# This macro defines a %%post script for a kernel*-devel package. +# %%kernel_devel_post [<subpackage>] +# Note we don't run hardlink if ostree is in use, as ostree is +# a far more sophisticated hardlink implementation. +# https://github.com/projectatomic/rpm-ostree/commit/58a79056a889be8814aa51f507b2c7a4dccee526 +# +%define kernel_devel_post() \ +%{expand:%%post %{?1:%{1}-}devel}\ +if [ -f /etc/sysconfig/kernel ]\ +then\ + . /etc/sysconfig/kernel || exit $?\ +fi\ +if [ "$HARDLINK" != "no" -a -x /usr/sbin/hardlink -a ! -e /run/ostree-booted ] \ +then\ + (cd /usr/src/kernels/%{KVERREL}%{?1:+%{1}} &&\ + /usr/bin/find . -type f | while read f; do\ + hardlink -c /usr/src/kernels/*%{?dist}.*/$f $f\ + done)\ +fi\ +%{nil} + +# +# This macro defines a %%post script for a kernel*-modules-extra package. +# It also defines a %%postun script that does the same thing. +# %%kernel_modules_extra_post [<subpackage>] +# +%define kernel_modules_extra_post() \ +%{expand:%%post %{?1:%{1}-}modules-extra}\ +/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\ +%{nil}\ +%{expand:%%postun %{?1:%{1}-}modules-extra}\ +/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\ +%{nil} + +# +# This macro defines a %%post script for a kernel*-modules-internal package. +# It also defines a %%postun script that does the same thing. +# %%kernel_modules_internal_post [<subpackage>] +# +%define kernel_modules_internal_post() \ +%{expand:%%post %{?1:%{1}-}modules-internal}\ +/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\ +%{nil}\ +%{expand:%%postun %{?1:%{1}-}modules-internal}\ +/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\ +%{nil} + +# +# This macro defines a %%post script for a kernel*-modules package. +# It also defines a %%postun script that does the same thing. +# %%kernel_modules_post [<subpackage>] +# +%define kernel_modules_post() \ +%{expand:%%post %{?1:%{1}-}modules}\ +/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\ +%{nil}\ +%{expand:%%postun %{?1:%{1}-}modules}\ +/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\ +%{nil} + +# This macro defines a %%posttrans script for a kernel package. +# %%kernel_variant_posttrans [<subpackage>] +# More text can follow to go at the end of this variant's %%post. +# +%define kernel_variant_posttrans() \ +%{expand:%%posttrans %{?1:%{1}-}core}\ +%if 0%{!?fedora:1}\ +if [ -x %{_sbindir}/weak-modules ]\ +then\ + %{_sbindir}/weak-modules --add-kernel %{KVERREL}%{?1:+%{1}} || exit $?\ +fi\ +%endif\ +/bin/kernel-install add %{KVERREL}%{?1:+%{1}} /lib/modules/%{KVERREL}%{?1:+%{1}}/vmlinuz || exit $?\ +%{nil} + +# +# This macro defines a %%post script for a kernel package and its devel package. +# %%kernel_variant_post [-v <subpackage>] [-r <replace>] +# More text can follow to go at the end of this variant's %%post. +# +%define kernel_variant_post(v:r:) \ +%{expand:%%kernel_devel_post %{?-v*}}\ +%{expand:%%kernel_modules_post %{?-v*}}\ +%{expand:%%kernel_modules_extra_post %{?-v*}}\ +%{expand:%%kernel_modules_internal_post %{?-v*}}\ +%{expand:%%kernel_variant_posttrans %{?-v*}}\ +%{expand:%%post %{?-v*:%{-v*}-}core}\ +%{-r:\ +if [ `uname -i` == "x86_64" -o `uname -i` == "i386" ] &&\ + [ -f /etc/sysconfig/kernel ]; then\ + /bin/sed -r -i -e 's/^DEFAULTKERNEL=%{-r*}$/DEFAULTKERNEL=kernel%{?-v:-%{-v*}}/' /etc/sysconfig/kernel || exit $?\ +fi}\ +%{nil} + +# +# This macro defines a %%preun script for a kernel package. +# %%kernel_variant_preun <subpackage> +# +%define kernel_variant_preun() \ +%{expand:%%preun %{?1:%{1}-}core}\ +/bin/kernel-install remove %{KVERREL}%{?1:+%{1}} /lib/modules/%{KVERREL}%{?1:+%{1}}/vmlinuz || exit $?\ +%if 0%{!?fedora:1}\ +if [ -x %{_sbindir}/weak-modules ]\ +then\ + %{_sbindir}/weak-modules --remove-kernel %{KVERREL}%{?1:+%{1}} || exit $?\ +fi\ +%endif\ +%{nil} + +%kernel_variant_preun +%kernel_variant_post -r kernel-smp + +%if %{with_pae} +%kernel_variant_preun lpae +%kernel_variant_post -v lpae -r (kernel|kernel-smp) +%endif + +%kernel_variant_preun debug +%kernel_variant_post -v debug + +%if %{with_zfcpdump} +%kernel_variant_preun zfcpdump +%kernel_variant_post -v zfcpdump +%endif + +if [ -x /sbin/ldconfig ] +then + /sbin/ldconfig -X || exit $? +fi + +### +### file lists +### + +%if %{with_headers} +%files headers +/usr/include/* +%endif + +%if %{with_cross_headers} +%files cross-headers +/usr/*-linux-gnu/include/* +%endif + +%if %{with_kernel_abi_whitelists} +%files -n kernel-abi-whitelists +/lib/modules/kabi-* +%endif + +%if %{with_kabidw_base} +%ifarch x86_64 s390x ppc64 ppc64le aarch64 +%files kabidw-base +%defattr(-,root,root) +/kabidw-base/%{_target_cpu}/* +%endif +%endif + +# only some architecture builds need kernel-doc +%if %{with_doc} +%files doc +%defattr(-,root,root) +%{_datadir}/doc/kernel-doc-%{rpmversion}/Documentation/* +%dir %{_datadir}/doc/kernel-doc-%{rpmversion}/Documentation +%dir %{_datadir}/doc/kernel-doc-%{rpmversion} +%endif + +%if %{with_perf} +%files -n perf +%{_bindir}/perf +%{_libdir}/libperf-jvmti.so +%dir %{_libdir}/traceevent/plugins +%{_libdir}/traceevent/plugins/* +%dir %{_libexecdir}/perf-core +%{_libexecdir}/perf-core/* +%{_datadir}/perf-core/* +%{_mandir}/man[1-8]/perf* +%{_sysconfdir}/bash_completion.d/perf +%doc linux-%{KVERREL}/tools/perf/Documentation/examples.txt +%{_docdir}/perf-tip/tips.txt + +%files -n python3-perf +%{python3_sitearch}/* + +%if %{with_debuginfo} +%files -f perf-debuginfo.list -n perf-debuginfo + +%files -f python3-perf-debuginfo.list -n python3-perf-debuginfo +%endif +# with_perf +%endif + +%if %{with_tools} +%ifnarch %{cpupowerarchs} +%files -n kernel-tools +%else +%files -n kernel-tools -f cpupower.lang +%{_bindir}/cpupower +%{_datadir}/bash-completion/completions/cpupower +%ifarch x86_64 +%{_bindir}/centrino-decode +%{_bindir}/powernow-k8-decode +%endif +%{_unitdir}/cpupower.service +%{_mandir}/man[1-8]/cpupower* +%config(noreplace) %{_sysconfdir}/sysconfig/cpupower +%ifarch x86_64 +%{_bindir}/x86_energy_perf_policy +%{_mandir}/man8/x86_energy_perf_policy* +%{_bindir}/turbostat +%{_mandir}/man8/turbostat* +%{_bindir}/intel-speed-select +%endif +# cpupowerarchs +%endif +%{_bindir}/tmon +%{_bindir}/iio_event_monitor +%{_bindir}/iio_generic_buffer +%{_bindir}/lsiio +%{_bindir}/lsgpio +%{_bindir}/gpio-hammer +%{_bindir}/gpio-event-mon +%{_mandir}/man1/kvm_stat* +%{_bindir}/kvm_stat + +%if %{with_debuginfo} +%files -f kernel-tools-debuginfo.list -n kernel-tools-debuginfo +%endif + +%ifarch %{cpupowerarchs} +%files -n kernel-tools-libs +%{_libdir}/libcpupower.so.0 +%{_libdir}/libcpupower.so.0.0.1 + +%files -n kernel-tools-libs-devel +%{_libdir}/libcpupower.so +%{_includedir}/cpufreq.h +%endif +# with_tools +%endif + +%if %{with_bpftool} +%files -n bpftool +%{_sbindir}/bpftool +%{_sysconfdir}/bash_completion.d/bpftool +%{_mandir}/man8/bpftool-cgroup.8.gz +%{_mandir}/man8/bpftool-gen.8.gz +%{_mandir}/man8/bpftool-map.8.gz +%{_mandir}/man8/bpftool-prog.8.gz +%{_mandir}/man8/bpftool-perf.8.gz +%{_mandir}/man8/bpftool.8.gz +%{_mandir}/man7/bpf-helpers.7.gz +%{_mandir}/man8/bpftool-net.8.gz +%{_mandir}/man8/bpftool-feature.8.gz +%{_mandir}/man8/bpftool-btf.8.gz + +%if %{with_debuginfo} +%files -f bpftool-debuginfo.list -n bpftool-debuginfo +%defattr(-,root,root) +%endif +%endif + +%if %{with_selftests} +%files selftests-internal +%{_libexecdir}/ksamples +%{_libexecdir}/kselftests +%endif + +# empty meta-package +%ifnarch %nobuildarches noarch +%files +%endif + +%if %{with_gcov} +%ifarch x86_64 s390x ppc64le aarch64 +%files gcov +%{_builddir} +%endif +%endif + +# This is %%{image_install_path} on an arch where that includes ELF files, +# or empty otherwise. +%define elf_image_install_path %{?kernel_image_elf:%{image_install_path}} + +# +# This macro defines the %%files sections for a kernel package +# and its devel and debuginfo packages. +# %%kernel_variant_files [-k vmlinux] <condition> <subpackage> <without_modules> +# +%define kernel_variant_files(k:) \ +%if %{2}\ +%{expand:%%files -f kernel-%{?3:%{3}-}core.list %{?1:-f kernel-%{?3:%{3}-}ldsoconf.list} %{?3:%{3}-}core}\ +%{!?_licensedir:%global license %%doc}\ +%license linux-%{KVERREL}/COPYING-%{version}-%{release}\ +/lib/modules/%{KVERREL}%{?3:+%{3}}/%{?-k:%{-k*}}%{!?-k:vmlinuz}\ +%ghost /%{image_install_path}/%{?-k:%{-k*}}%{!?-k:vmlinuz}-%{KVERREL}%{?3:+%{3}}\ +/lib/modules/%{KVERREL}%{?3:+%{3}}/.vmlinuz.hmac \ +%ghost /%{image_install_path}/.vmlinuz-%{KVERREL}%{?3:+%{3}}.hmac \ +%ifarch %{arm} aarch64\ +/lib/modules/%{KVERREL}%{?3:+%{3}}/dtb \ +%ghost /%{image_install_path}/dtb-%{KVERREL}%{?3:+%{3}} \ +%endif\ +%attr(600,root,root) /lib/modules/%{KVERREL}%{?3:+%{3}}/System.map\ +%ghost /boot/System.map-%{KVERREL}%{?3:+%{3}}\ +/lib/modules/%{KVERREL}%{?3:+%{3}}/symvers.gz\ +/lib/modules/%{KVERREL}%{?3:+%{3}}/config\ +%ghost /boot/symvers-%{KVERREL}%{?3:+%{3}}.gz\ +%ghost /boot/config-%{KVERREL}%{?3:+%{3}}\ +%ghost /boot/initramfs-%{KVERREL}%{?3:+%{3}}.img\ +%dir /lib/modules\ +%dir /lib/modules/%{KVERREL}%{?3:+%{3}}\ +%dir /lib/modules/%{KVERREL}%{?3:+%{3}}/kernel\ +/lib/modules/%{KVERREL}%{?3:+%{3}}/build\ +/lib/modules/%{KVERREL}%{?3:+%{3}}/source\ +/lib/modules/%{KVERREL}%{?3:+%{3}}/updates\ +/lib/modules/%{KVERREL}%{?3:+%{3}}/bls.conf\ +%if 0%{!?fedora:1}\ +/lib/modules/%{KVERREL}%{?3:+%{3}}/weak-updates\ +%endif\ +%{_datadir}/doc/kernel-keys/%{KVERREL}%{?3:+%{3}}/kernel-signing-ca.cer\ +%ifarch s390x ppc64le\ +%if 0%{!?4:1}\ +%{_datadir}/doc/kernel-keys/%{KVERREL}%{?3:+%{3}}/%{signing_key_filename} \ +%endif\ +%endif\ +%if %{1}\ +/lib/modules/%{KVERREL}%{?3:+%{3}}/vdso\ +%endif\ +/lib/modules/%{KVERREL}%{?3:+%{3}}/modules.*\ +%{expand:%%files -f kernel-%{?3:%{3}-}modules.list %{?3:%{3}-}modules}\ +%{expand:%%files %{?3:%{3}-}devel}\ +%defverify(not mtime)\ +/usr/src/kernels/%{KVERREL}%{?3:+%{3}}\ +%{expand:%%files %{?3:%{3}-}modules-extra}\ +%config(noreplace) /etc/modprobe.d/*-blacklist.conf\ +/lib/modules/%{KVERREL}%{?3:+%{3}}/extra\ +%{expand:%%files %{?3:%{3}-}modules-internal}\ +/lib/modules/%{KVERREL}%{?3:+%{3}}/internal\ +%if %{with_debuginfo}\ +%ifnarch noarch\ +%{expand:%%files -f debuginfo%{?3}.list %{?3:%{3}-}debuginfo}\ +%endif\ +%endif\ +%if %{?3:1} %{!?3:0}\ +%{expand:%%files %{3}}\ +%endif\ +%endif\ +%{nil} + +%kernel_variant_files %{_use_vdso} %{with_up} +%kernel_variant_files %{_use_vdso} %{with_debug} debug +%kernel_variant_files %{use_vdso} %{with_pae} lpae +%kernel_variant_files %{_use_vdso} %{with_zfcpdump} zfcpdump 1 + +%define kernel_variant_ipaclones(k:) \ +%if %{1}\ +%if %{with_ipaclones}\ +%{expand:%%files %{?2:%{2}-}ipaclones-internal}\ +%defattr(-,root,root)\ +%defverify(not mtime)\ +/usr/src/kernels/%{KVERREL}%{?2:+%{2}}-ipaclones\ +%endif\ +%endif\ +%{nil} + +%kernel_variant_ipaclones %{with_up} + +# plz don't put in a version string unless you're going to tag +# and build. +# +# +%changelog +* Tue Jul 14 2020 Jan Drögehoff <sentrycraft123@gmail.com> - 5.7.8-fsync.202 +- Linux v5.7.8 add zen patches + +* Sun Jul 12 2020 Jan Drögehoff <sentrycraft123@gmail.com> - 5.7.8-fsync.201 +- Linux v5.7.8 fsync + +* Thu Jul 09 2020 Justin M. Forbes <jforbes@fedoraproject.org> - 5.7.8-200 +- Linux v5.7.8 +- Fixes (rhbz 1852944 1852942 1852963 1852962) + +* Wed Jul 01 2020 Justin M. Forbes <jforbes@fedoraproject.org> - 5.7.7-200 +- Linux v5.7.7 + +* Mon Jun 29 2020 Justin M. Forbes <jforbes@fedoraproject.org> - 5.7.6-200 +- Linux v5.7.6 rebase + +* Wed Jun 17 2020 Justin M. Forbes <jforbes@fedoraproject.org> - 5.6.19-300 +- Linux v5.6.19 + +* Mon Jun 15 2020 Stefan Assmann <sassmann@redhat.com> +- Add dual fan control for P50, P51, P52, P70, P71, P72, P1 gen1, P2 gen2, + X1E gen1 and X1E gen2. + +* Wed Jun 10 2020 Justin M. Forbes <jforbes@fedoraproject.org> - 5.6.18-300 +- Linux v5.6.18 + +* Mon Jun 08 2020 Justin M. Forbes <jforbes@fedoraproject.org> - 5.6.17-300 +- Linux v5.6.17 + +* Thu Jun 04 2020 Justin M. Forbes <jforbes@fedoraproject.org> - 5.6.16-300 +- Fix CVE-2020-10757 (rhbz 1842525 184388) + +* Wed Jun 03 2020 Justin M. Forbes <jforbes@fedoraproject.org> +- Linux v5.6.16 + +* Thu May 28 2020 Justin M. Forbes <jforbes@fedoraproject.org> - 5.6.15-300 +- Linux v5.6.15 + +* Wed May 20 2020 Hans de Goede <hdegoede@redhat.com> - 5.6.14-300 +- Fix automatic guest resolution resizing of VirtualBox VMs (rhbz 1789545) +- Fix Sony laptop hang on resume from suspend (rhbz 1830150) + +* Wed May 20 2020 Justin M. Forbes <jforbes@fedoraproject.org> +- Linux v5.6.14 +- Fix CVE-2020-12888 (rhbz 1836245 1836244) + +* Mon May 18 2020 Justin M. Forbes <jforbes@fedoraproject.org> +- Fix stability issue with the jetson-tk1 NIC + +* Mon May 18 2020 Hans de Goede <hdegoede@redhat.com> +- Add patch fixing backlight control on Cherry Trail devices (rhbz 1828927) + +* Thu May 14 2020 Justin M. Forbes <jforbes@fedoraproject.org> - 5.6.13-300 +- Linux v5.6.13 +- Fix boot hang caused by buggy TPM support (rhbz 1779611) +- Fix CVE-2020-12655 (rhbz 1832543 1832545) + +* Thu May 14 2020 Peter Robinson <pbrobinson@fedoraproject.org> +- Fix for NIC issues on Jetson Xavier AGX + +* Tue May 12 2020 Justin M. Forbes <jforbes@fedoraproject.org> +- Fix CVE-2020-10711 (rhbz 1825116 1834778) + +* Mon May 11 2020 Justin M. Forbes <jforbes@fedoraproject.org> - 5.6.12-300 +- Linux v5.6.12 + +* Wed May 06 2020 Justin M. Forbes <jforbes@fedoraproject.org> - 5.6.11-300 +- Linux v5.6.11 + +* Mon May 04 2020 Justin M. Forbes <jforbes@fedoraproject.org> - 5.6.10-300 +- Linux v5.6.10 + +* Wed Apr 29 2020 Justin M. Forbes <jforbes@fedoraproject.org> - 5.6.8-300 +- Linux v5.6.8 +- Fixes CVE-2020-11884 (rhbz 1828149 1829181) + +* Tue Apr 28 2020 Justin M. Forbes <jforbes@fedoraproject.org> +- MST Fix from Lyude Paul +- drm/i915/gem: Hold obj->vma.lock over for_each_ggtt_vma() (airlied request) + +* Thu Apr 23 2020 Justin M. Forbes <jforbes@fedoraproject.org> - 5.6.7-300 +- Linux v5.6.7 + +* Tue Apr 21 2020 Justin M. Forbes <jforbes@fedoraproject.org> - 5.6.6-300 +- Linux v5.6.6 + +* Fri Apr 17 2020 Justin M. Forbes <jforbes@fedoraproject.org> - 5.6.5-300 +- Linux v5.6.5 + +* Thu Apr 16 2020 Justin M. Forbes <jforbes@fedoraproject.org> +- Nouveau Add missing MODULE_FIRMWARE() lines for initramfs generators (rhbz 1825046) + +* Mon Apr 13 2020 Jeremy Cline <jcline@redhat.com> - 5.6.4-300 +- Linux v5.6.4 + +* Wed Apr 08 2020 Jeremy Cline <jcline@redhat.com> - 5.6.3-300 +- Linux v5.6.3 + +* Tue Apr 07 2020 Karol Herbst <kherbst@redhat.com> - 5.6.2-301 +- Add patches to fix nouveau issues preventing booting the installer or system + +* Fri Apr 3 2020 Peter Robinson <pbrobinson@fedoraproject.org> +- Raspberry Pi HDMI mode validation fix +- Raspberry Pi 4 rev 1.2 mmc fix + +* Thu Apr 02 2020 Jeremy Cline <jcline@redhat.com> - 5.6.2-300 +- Linux v5.6.2 + +* Thu Apr 02 2020 Hans de Goede <hdegoede@redhat.com> +- Add patch fixing Lenovo X1 7th and 8th gen not suspending (rhbz 1816621) +- Add patch fixing Lenovo X1 8th gen speaker volume control (rhbz 1820196) + +* Wed Apr 01 2020 Jeremy Cline <jcline@redhat.com> - 5.6.1-300 +- Linux v5.6.1 +- Fixes CVE-2020-8835 (rhbz 1818941 1817350) + +* Mon Mar 30 2020 Jeremy Cline <jcline@redhat.com> - 5.6.0-300 +- Linux v5.6 + +* Fri Mar 27 2020 Jeremy Cline <jcline@redhat.com> - 5.6.0-0.rc7.git1.1 +- Linux v5.6-rc7-227-gf3e69428b5e2 + +* Fri Mar 27 2020 Jeremy Cline <jcline@redhat.com> +- Reenable debugging options. + +* Mon Mar 23 2020 Peter Robinson <pbrobinson@gmail.com> - 5.6.0-0.rc7.git0.1 +- Linux v5.6-rc7 + +* Mon Mar 23 2020 Peter Robinson <pbrobinson@gmail.com> +- Disable debugging options. + +* Fri Mar 20 2020 Jeremy Cline <jcline@redhat.com> - 5.6.0-0.rc6.git2.1 +- Linux v5.6-rc6-115-g5ad0ec0b8652 +- Switch Secure Boot to lock down to integrity mode (rhbz 1815571) + +* Wed Mar 18 2020 Jeremy Cline <jcline@redhat.com> - 5.6.0-0.rc6.git1.1 +- Linux v5.6-rc6-9-gac309e7744be + +* Wed Mar 18 2020 Jeremy Cline <jcline@redhat.com> +- Reenable debugging options. + +* Tue Mar 17 2020 Jeremy Cline <jcline@redhat.com> - 5.6.0-0.rc6.git0.1 +- Linux v5.6-rc6 + +* Tue Mar 10 2020 Jeremy Cline <jcline@redhat.com> - 5.6.0-0.rc5.git0.2 +- A series of eDP backlight fixes for i915 (rhbz 1811850) + +* Mon Mar 09 2020 Hans de Goede <hdegoede@redhat.com> +- Fix only 1 monitor working on DP-MST docking stations (rhbz 1809681) +- Fix backtraces on various buggy BIOS-es (rhbz 1564895, 1808874) +- Add /etc/modprobe.d/floppy-blacklist.conf to fix auto-loading of the + legacy floppy driver (rhbz 1789155) + +* Mon Mar 09 2020 Peter Robinson <pbrobinson@gmail.com> - 5.6.0-0.rc5.git0.1 +- Linux v5.6-rc5 + +* Mon Mar 09 2020 Peter Robinson <pbrobinson@gmail.com> +- Disable debugging options. + +* Fri Mar 06 2020 Jeremy Cline <jcline@redhat.com> - 5.6.0-0.rc4.git1.1 +- Linux v5.6-rc4-135-gaeb542a1b5c5 + +* Fri Mar 06 2020 Jeremy Cline <jcline@redhat.com> +- Reenable debugging options. + +* Mon Mar 02 2020 Jeremy Cline <jcline@redhat.com> - 5.6.0-0.rc4.git0.1 +- Linux v5.6-rc4 + +* Mon Mar 02 2020 Jeremy Cline <jcline@redhat.com> +- Disable debugging options. + +* Fri Feb 28 2020 Jeremy Cline <jcline@redhat.com> - 5.6.0-0.rc3.git3.1 +- Linux v5.6-rc3-195-gc60c04021353 + +* Thu Feb 27 2020 Peter Robinson <pbrobinson@fedoraproject.org> +- Fixes and enhancements to some AllWinner Pine64 devices +- Some fixes for Tegra devices +- Initial support for the Pinebook Pro + +* Thu Feb 27 2020 Jeremy Cline <jcline@redhat.com> - 5.6.0-0.rc3.git2.1 +- Linux v5.6-rc3-71-gbfdc6d91a25f + +* Tue Feb 25 2020 Jeremy Cline <jcline@redhat.com> - 5.6.0-0.rc3.git1.1 +- Linux v5.6-rc3-26-g63623fd44972 + +* Tue Feb 25 2020 Jeremy Cline <jcline@redhat.com> +- Reenable debugging options. + +* Mon Feb 24 2020 Jeremy Cline <jcline@redhat.com> - 5.6.0-0.rc3.git0.1 +- Linux v5.6-rc3 + +* Mon Feb 24 2020 Jeremy Cline <jcline@redhat.com> +- Disable debugging options. + +* Fri Feb 21 2020 Jeremy Cline <jcline@redhat.com> - 5.6.0-0.rc2.git3.1 +- Linux v5.6-rc2-55-gca7e1fd1026c + +* Wed Feb 19 2020 Jeremy Cline <jcline@redhat.com> +- Pick up a uapi fix for qemu (rhbz 1804330) + +* Wed Feb 19 2020 Jeremy Cline <jcline@redhat.com> - 5.6.0-0.rc2.git2.1 +- Linux v5.6-rc2-47-g4b205766d8fc + +* Tue Feb 18 2020 Jeremy Cline <jcline@redhat.com> - 5.6.0-0.rc2.git1.1 +- Linux v5.6-rc2-8-gb1da3acc781c +- Enable CONFIG_INET_ESPINTCP (rhbz 1804255) + +* Tue Feb 18 2020 Jeremy Cline <jcline@redhat.com> +- Reenable debugging options. + +* Mon Feb 17 2020 Jeremy Cline <jcline@redhat.com> - 5.6.0-0.rc2.git0.1 +- Linux v5.6-rc2 + +* Mon Feb 17 2020 Jeremy Cline <jcline@redhat.com> +- Disable debugging options. + +* Fri Feb 14 2020 Jeremy Cline <jcline@redhat.com> - 5.6.0-0.rc1.git3.1 +- Linux v5.6-rc1-44-gb19e8c684703 + +* Thu Feb 13 2020 Jeremy Cline <jcline@redhat.com> - 5.6.0-0.rc1.git2.1 +- Linux v5.6-rc1-23-g0bf999f9c5e7 + +* Thu Feb 13 2020 Jeremy Cline <jcline@redhat.com> +- Pull in cdrom ioctl fix (rhbz 1801353) + +* Tue Feb 11 2020 Jeremy Cline <jcline@redhat.com> - 5.6.0-0.rc1.git1.1 +- Linux v5.6-rc1-5-g0a679e13ea30 + +* Tue Feb 11 2020 Jeremy Cline <jcline@redhat.com> +- Reenable debugging options. + +* Mon Feb 10 2020 Jeremy Cline <jcline@redhat.com> +- Remove sysrq support to lift lockdown (rhbz 1800859) + +* Mon Feb 10 2020 Jeremy Cline <jcline@redhat.com> - 5.6.0-0.rc1.git0.1 +- Linux v5.6-rc1 + +* Mon Feb 10 2020 Jeremy Cline <jcline@redhat.com> +- Disable debugging options. + +* Fri Feb 07 2020 Jeremy Cline <jcline@redhat.com> - 5.6.0-0.rc0.git5.1 +- Linux v5.5-9824-g90568ecf5615 +- Enable DM_CLONE as a module (rhbz 1799060) +- Enable PCI Express devices on RockChip SoCs (rhbz 1792564) + +* Thu Feb 06 2020 Jeremy Cline <jcline@redhat.com> - 5.6.0-0.rc0.git4.1 +- Linux v5.5-9737-g4c46bef2e96a + +* Wed Feb 05 2020 Jeremy Cline <jcline@redhat.com> - 5.6.0-0.rc0.git3.1 +- Linux v5.5-9402-g6992ca0dd017 + +* Sat Feb 01 2020 Jeremy Cline <jcline@redhat.com> - 5.6.0-0.rc0.git2.1 +- Linux v5.5-8686-g14cd0bd04907 + +* Wed Jan 29 2020 Jeremy Cline <jcline@redhat.com> - 5.5.0-1 +- Linux v5.5-3996-gb3a608222336 + +* Wed Jan 29 2020 Jeremy Cline <jcline@redhat.com> +- Reenable debugging options. + +* Mon Jan 27 2020 Justin M. Forbes <jforbes@fedoraproject.org> - 5.5.0-1 +- Linux v5.5 + +* Fri Jan 24 2020 Justin M. Forbes <jforbes@fedoraproject.org> - 5.5.0-0.rc7.git2.1 +- Linux v5.5-rc7-62-g6381b442836e + +* Thu Jan 23 2020 Justin M. Forbes <jforbes@fedoraproject.org> - 5.5.0-0.rc7.git1.1 +- Linux v5.5-rc7-16-g131701c697e8 + +* Mon Jan 20 2020 Justin M. Forbes <jforbes@fedoraproject.org> - 5.5.0-0.rc7.git0.1 +- Linux v5.5-rc7 + +* Mon Jan 20 2020 Justin M. Forbes <jforbes@fedoraproject.org> +- Disable debugging options. + +* Fri Jan 17 2020 Justin M. Forbes <jforbes@fedoraproject.org> - 5.5.0-0.rc6.git3.1 +- Linux v5.5-rc6-143-gab7541c3addd + +* Wed Jan 15 2020 Justin M. Forbes <jforbes@fedoraproject.org> - 5.5.0-0.rc6.git2.1 +- Linux v5.5-rc6-45-g51d69817519f + +* Tue Jan 14 2020 Justin M. Forbes <jforbes@fedoraproject.org> - 5.5.0-0.rc6.git1.1 +- Linux v5.5-rc6-27-g452424cdcbca +- Reenable debugging options. + +* Mon Jan 13 2020 Justin M. Forbes <jforbes@fedoraproject.org> +- Add Documentation back to kernel-devel as it has Kconfig now (rhbz 1789641) + +* Mon Jan 13 2020 Justin M. Forbes <jforbes@fedoraproject.org> - 5.5.0-0.rc6.git0.1 +- Linux v5.5-rc6 + +* Mon Jan 13 2020 Justin M. Forbes <jforbes@fedoraproject.org> +- Disable debugging options. + +* Fri Jan 10 2020 Justin M. Forbes <jforbes@fedoraproject.org> - 5.5.0-0.rc5.git3.1 +- Linux v5.5-rc5-215-g4e4cd21c64da + +* Thu Jan 09 2020 Justin M. Forbes <jforbes@fedoraproject.org> - 5.5.0-0.rc5.git2.1 +- Linux v5.5-rc5-134-ge69ec487b2c7 + +* Wed Jan 08 2020 Justin M. Forbes <jforbes@fedoraproject.org> - 5.5.0-0.rc5.git1.1 +- Linux v5.5-rc5-41-gb07f636fca1c +- Reenable debugging options. + +* Mon Jan 06 2020 Hans de Goede <hdegoede@redhat.com> +- Make the MFD Intel LPSS driver builtin, some devices require this to be + available early during boot (rhbz#1787997) + +* Mon Jan 06 2020 Justin M. Forbes <jforbes@fedoraproject.org> - 5.5.0-0.rc5.git0.1 +- Linux v5.5-rc5 + +* Mon Jan 06 2020 Justin M. Forbes <jforbes@fedoraproject.org> +- Disable debugging options. + +* Fri Jan 03 2020 Justin M. Forbes <jforbes@fedoraproject.org> - 5.5.0-0.rc4.git2.1 +- Linux v5.5-rc4-116-gbed723519a72 + +* Thu Jan 02 2020 Justin M. Forbes <jforbes@fedoraproject.org> - 5.5.0-0.rc4.git1.1 +- Linux v5.5-rc4-66-g738d2902773e + +* Mon Dec 30 2019 Peter Robinson <pbrobinson@gmail.com> - 5.5.0-0.rc4.git0.1 +- Linux v5.5-rc4 + +* Mon Dec 30 2019 Peter Robinson <pbrobinson@gmail.com> +- Disable debugging options. + +* Mon Dec 23 2019 Justin M. Forbes <jforbes@fedoraproject.org> - 5.5.0-0.rc3.git0.1 +- Linux v5.5-rc3 + +* Mon Dec 23 2019 Justin M. Forbes <jforbes@fedoraproject.org> +- Disable debugging options. + +* Thu Dec 19 2019 Justin M. Forbes <jforbes@fedoraproject.org> - 5.5.0-0.rc2.git3.1 +- Linux v5.5-rc2-195-g4a94c4332334 + +* Wed Dec 18 2019 Justin M. Forbes <jforbes@fedoraproject.org> - 5.5.0-0.rc2.git2.1 +- Linux v5.5-rc2-157-g2187f215ebaa + +* Tue Dec 17 2019 Justin M. Forbes <jforbes@fedoraproject.org> - 5.5.0-0.rc2.git1.1 +- Linux v5.5-rc2-56-gea200dec5128 +- Enable NO_HZ_FULL for other arches too. +- Reenable debugging options. + +* Mon Dec 16 2019 Justin M. Forbes <jforbes@fedoraproject.org> - 5.5.0-0.rc2.git0.1 +- Linux v5.5-rc2 + +* Mon Dec 16 2019 Justin M. Forbes <jforbes@fedoraproject.org> +- Disable debugging options. + +* Thu Dec 12 2019 Justin M. Forbes <jforbes@fedoraproject.org> - 5.5.0-0.rc1.git2.1 +- Linux v5.5-rc1-27-gae4b064e2a61 + +* Tue Dec 10 2019 Peter Robinson <pbrobinson@fedoraproject.org> +- Updates for ARMv7/aarch64 +- Enable newer TI ARMv7 platforms + +* Tue Dec 10 2019 Justin M. Forbes <jforbes@fedoraproject.org> - 5.5.0-0.rc1.git1.1 +- Linux v5.5-rc1-12-g6794862a16ef +- Reenable debugging options. + +* Mon Dec 09 2019 Justin M. Forbes <jforbes@fedoraproject.org> - 5.5.0-0.rc1.git0.1 +- Linux v5.5-rc1 + +* Mon Dec 09 2019 Justin M. Forbes <jforbes@fedoraproject.org> +- Disable debugging options. + +* Fri Dec 06 2019 Justin M. Forbes <jforbes@fedoraproject.org> - 5.5.0-0.rc0.git7.1 +- Linux v5.4-12941-gb0d4beaa5a4b + +* Thu Dec 05 2019 Justin M. Forbes <jforbes@fedoraproject.org> - 5.5.0-0.rc0.git6.1 +- Linux v5.4-11747-g2f13437b8917 + +* Wed Dec 04 2019 Justin M. Forbes <jforbes@fedoraproject.org> - 5.5.0-0.rc0.git5.1 +- Linux v5.4-11681-g63de37476ebd + +* Tue Dec 03 2019 Justin M. Forbes <jforbes@fedoraproject.org> - 5.5.0-0.rc0.git4.1 +- Linux v5.4-11180-g76bb8b05960c + +* Mon Dec 02 2019 Justin M. Forbes <jforbes@fedoraproject.org> - 5.5.0-0.rc0.git3.1 +- Linux v5.4-10271-g596cf45cbf6e + +* Wed Nov 27 2019 Justin M. Forbes <jforbes@fedoraproject.org> - 5.5.0-0.rc0.git2.1 +- Linux v5.4-5280-g89d57dddd7d3 + +* Tue Nov 26 2019 Justin M. Forbes <jforbes@fedoraproject.org> - 5.5.0-0.rc0.git1.1 +- Linux v5.4-3619-gbe2eca94d144 +- Reenable debugging options. + +* Mon Nov 25 2019 Laura Abbott <labbott@redhat.com> - 5.4.0-2 +- bump and build to pick up fixes + +* Mon Nov 25 2019 Justin M. Forbes <jforbes@fedoraproject.org> +- Fix CVE-2019-14895 (rhbz 1774870 1776139) +- Fix CVE-2019-14896 (rhbz 1774875 1776143) +- Fix CVE-2019-14897 (rhbz 1774879 1776146) +- Fix CVE-2019-14901 (rhbz 1773519 1776184) +- Fix CVE-2019-19078 (rhbz 1776354 1776353) + +* Mon Nov 25 2019 Jeremy Cline <jcline@redhat.com> - 5.4.0-1 +- Linux v5.4.0 + +* Fri Nov 22 2019 Laura Abbott <labbott@redhat.com> - 5.4.0-0.rc8.git1.2 +- bump and build to test new configs + +* Fri Nov 22 2019 Jeremy Cline <jcline@redhat.com> - 5.4.0-0.rc8.git1.1 +- Linux v5.4-rc8-15-g81429eb8d9ca + +* Fri Nov 22 2019 Jeremy Cline <jcline@redhat.com> +- Reenable debugging options. + +* Thu Nov 21 2019 Justin M. Forbes <jforbes@fedoraproject.org> - 5.3.12-300 +- Fix CVE-2019-19071 (rhbz 1774949 1774950) +- Fix CVE-2019-19070 (rhbz 1774957 1774958) +- Fix CVE-2019-19068 (rhbz 1774963 1774965) +- Fix CVE-2019-19043 (rhbz 1774972 1774973) +- Fix CVE-2019-19066 (rhbz 1774976 1774978) +- Fix CVE-2019-19046 (rhbz 1774988 1774989) +- Fix CVE-2019-19050 (rhbz 1774998 1775002) +- Fix CVE-2019-19062 (rhbz 1775021 1775023) +- Fix CVE-2019-19064 (rhbz 1775010 1775011) +- Fix CVE-2019-19063 (rhbz 1775015 1775016) +- Fix CVE-2019-19057 (rhbz 1775050 1775051) +- Fix CVE-2019-19053 (rhbz 1775956 1775110) +- Fix CVE-2019-19056 (rhbz 1775097 1775115) +- Fix CVE-2019-19054 (rhbz 1775063 1775117) + +* Wed Nov 20 2019 Laura Abbott <labbott@redhat.com> - 5.4.0-0.rc8.git0.2 +- bump and build to check the pesign + +* Mon Nov 18 2019 Jeremy Cline <jcline@redhat.com> - 5.4.0-0.rc8.git0.1 +- Linux v5.4-rc8 + +* Mon Nov 18 2019 Jeremy Cline <jcline@redhat.com> +- Disable debugging options. + +* Fri Nov 15 2019 Jeremy Cline <jcline@redhat.com> - 5.4.0-0.rc7.git2.1 +- Linux v5.4-rc7-68-g96b95eff4a59 + +* Thu Nov 14 2019 Laura Abbott <labbott@redhat.com> - 5.4.0-0.rc7.git1.2 +- bump and build + +* Wed Nov 13 2019 Jeremy Cline <jcline@redhat.com> - 5.4.0-0.rc7.git1.1 +- Linux v5.4-rc7-49-g0e3f1ad80fc8 + +* Wed Nov 13 2019 Jeremy Cline <jcline@redhat.com> +- Reenable debugging options. + +* Mon Nov 11 2019 Jeremy Cline <jcline@redhat.com> - 5.4.0-0.rc7.git0.1 +- Linux v5.4-rc7 + +* Mon Nov 11 2019 Jeremy Cline <jcline@redhat.com> +- Disable debugging options. + +* Fri Nov 08 2019 Jeremy Cline <jcline@redhat.com> - 5.4.0-0.rc6.git3.1 +- Linux v5.4-rc6-29-g847120f859cc + +* Thu Nov 07 2019 Jeremy Cline <jcline@redhat.com> - 5.4.0-0.rc6.git2.1 +- Linux v5.4-rc6-26-g4dd58158254c + +* Tue Nov 05 2019 Jeremy Cline <jcline@redhat.com> - 5.4.0-0.rc6.git1.1 +- Linux v5.4-rc6-8-g26bc67213424 + +* Tue Nov 05 2019 Jeremy Cline <jcline@redhat.com> +- Reenable debugging options. + +* Mon Nov 04 2019 Jeremy Cline <jcline@redhat.com> - 5.4.0-0.rc6.git0.1 +- Linux v5.4-rc6 + +* Mon Nov 04 2019 Jeremy Cline <jcline@redhat.com> +- Disable debugging options. + +* Fri Nov 01 2019 Laura Abbott <labbott@redhat.com> - 5.4.0-0.rc5.git1.3 +- bump and build again + +* Thu Oct 31 2019 Laura Abbott <labbott@redhat.com> - 5.4.0-0.rc5.git1.2 +- bump and build to fix broken weak-updates + +* Thu Oct 31 2019 Jeremy Cline <jcline@redhat.com> - 5.4.0-0.rc5.git1.1 +- Linux v5.4-rc5-49-ge472c64aa4fa + +* Thu Oct 31 2019 Jeremy Cline <jcline@redhat.com> +- Reenable debugging options. + +* Wed Oct 30 2019 Laura Abbott <labbott@redhat.com> - 5.4.0-0.rc5.git0.2 +- bump and build to make sure I haven't broken anything + +* Mon Oct 28 2019 Jeremy Cline <jcline@redhat.com> - 5.4.0-0.rc5.git0.1 +- Linux v5.4-rc5 + +* Mon Oct 28 2019 Jeremy Cline <jcline@redhat.com> +- Disable debugging options. + +* Thu Oct 24 2019 Jeremy Cline <jcline@redhat.com> - 5.4.0-0.rc4.git3.1 +- Linux v5.4-rc4-85-gf116b96685a0 + +* Wed Oct 23 2019 Jeremy Cline <jcline@redhat.com> - 5.4.0-0.rc4.git2.1 +- Linux v5.4-rc4-37-g13b86bc4cd64 + +* Tue Oct 22 2019 Jeremy Cline <jcline@redhat.com> - 5.4.0-0.rc4.git1.1 +- Linux v5.4-rc4-18-g3b7c59a1950c + +* Tue Oct 22 2019 Jeremy Cline <jcline@redhat.com> +- Reenable debugging options. + +* Mon Oct 21 2019 Jeremy Cline <jcline@redhat.com> - 5.4.0-0.rc4.git0.1 +- Linux v5.4-rc4 + +* Mon Oct 21 2019 Jeremy Cline <jcline@redhat.com> +- Disable debugging options. + +* Fri Oct 18 2019 Jeremy Cline <jcline@redhat.com> - 5.4.0-0.rc3.git2.1 +- Linux v5.4-rc3-99-g0e2adab6cf28 + +* Tue Oct 15 2019 Jeremy Cline <jcline@redhat.com> - 5.4.0-0.rc3.git1.1 +- Linux v5.4-rc3-18-g5bc52f64e884 + +* Tue Oct 15 2019 Jeremy Cline <jcline@redhat.com> +- Reenable debugging options. + +* Mon Oct 14 2019 Jeremy Cline <jcline@redhat.com> - 5.4.0-0.rc3.git0.1 +- Linux v5.4-rc3 + +* Mon Oct 14 2019 Jeremy Cline <jcline@redhat.com> +- Disable debugging options. + +* Thu Oct 10 2019 Jeremy Cline <jcline@redhat.com> - 5.4.0-0.rc2.git2.1 +- Linux v5.4-rc2-96-gfb20da6af705 + +* Tue Oct 08 2019 Jeremy Cline <jcline@redhat.com> - 5.4.0-0.rc2.git1.1 +- Linux v5.4-rc2-20-geda57a0e4299 + +* Tue Oct 08 2019 Jeremy Cline <jcline@redhat.com> +- Reenable debugging options. + +* Mon Oct 07 2019 Laura Abbott <labbott@redhat.com> +- Enable a few NFT options (rhbz 1651813) + +* Mon Oct 07 2019 Jeremy Cline <jcline@redhat.com> - 5.4.0-0.rc2.git0.1 +- Linux v5.4-rc2 + +* Mon Oct 07 2019 Jeremy Cline <jcline@redhat.com> +- Disable debugging options. + +* Sun Oct 6 2019 Peter Robinson <pbrobinson@fedoraproject.org> +- Fixes for Jetson TX1/TX2 series of devices + +* Fri Oct 04 2019 Jeremy Cline <jcline@redhat.com> - 5.4.0-0.rc1.git1.1 +- Linux v5.4-rc1-14-gcc3a7bfe62b9 + +* Fri Oct 04 2019 Jeremy Cline <jcline@redhat.com> +- Reenable debugging options. + +* Wed Oct 02 2019 Jeremy Cline <jcline@redhat.com> - 5.4.0-0.rc1.git0.1 +- Linux v5.4-rc1 + +* Wed Oct 02 2019 Jeremy Cline <jcline@redhat.com> +- Disable debugging options. + +* Mon Sep 30 2019 Jeremy Cline <jcline@redhat.com> - 5.4.0-0.rc0.git9.1 +- Linux v5.3-13236-g97f9a3c4eee5 + +* Thu Sep 26 2019 Jeremy Cline <jcline@redhat.com> - 5.4.0-0.rc0.git8.1 +- Linux v5.3-12397-gf41def397161 + +* Wed Sep 25 2019 Jeremy Cline <jcline@redhat.com> - 5.4.0-0.rc0.git7.1 +- Linux v5.3-12289-g351c8a09b00b + +* Tue Sep 24 2019 Jeremy Cline <jcline@redhat.com> - 5.4.0-0.rc0.git6.1 +- Linux v5.3-12025-g4c07e2ddab5b + +* Mon Sep 23 2019 Jeremy Cline <jcline@redhat.com> - 5.4.0-0.rc0.git5.1 +- Linux v5.3-11768-g619e17cf75dd + +* Fri Sep 20 2019 Jeremy Cline <jcline@redhat.com> - 5.4.0-0.rc0.git4.1 +- Linux v5.3-10169-g574cc4539762 + +* Thu Sep 19 2019 Jeremy Cline <jcline@redhat.com> - 5.4.0-0.rc0.git3.1 +- Linux v5.3-7639-gb41dae061bbd + +* Wed Sep 18 2019 Jeremy Cline <jcline@redhat.com> - 5.4.0-0.rc0.git2.1 +- Linux v5.3-3839-g35f7a9526615 + +* Tue Sep 17 2019 Jeremy Cline <jcline@redhat.com> - 5.4.0-0.rc0.git1.1 +- Linux v5.3-2061-gad062195731b + +* Tue Sep 17 2019 Jeremy Cline <jcline@redhat.com> +- Reenable debugging options. |