diff options
Diffstat (limited to 'SPECS')
| -rwxr-xr-x | SPECS/kernel.spec | 804 |
1 files changed, 532 insertions, 272 deletions
diff --git a/SPECS/kernel.spec b/SPECS/kernel.spec index 566ebcd..ca4e783 100755 --- a/SPECS/kernel.spec +++ b/SPECS/kernel.spec @@ -59,14 +59,21 @@ Summary: The Linux kernel -# For a kernel released for public testing, released_kernel should be 1. -# For internal testing builds during development, it should be 0. -# For rawhide and/or a kernel built from an rc or git snapshot, -# released_kernel should be 0. -# For a stable, released kernel, released_kernel should be 1. +# Set released_kernel to 1 when the upstream source tarball contains a +# kernel release. (This includes prepatch or "rc" releases.) +# Set released_kernel to 0 when the upstream source tarball contains an +# unreleased kernel development snapshot. %global released_kernel 1 -%global distro_build 300 +# Set debugbuildsenabled to 1 to build separate base and debug kernels +# (on supported architectures). The kernel-debug-* subpackages will +# contain the debug kernel. +# Set debugbuildsenabled to 0 to not build a separate debug kernel, but +# to build the base kernel using the debug configuration. (Specifying +# the --with-release option overrides this setting.) +%define debugbuildsenabled 1 + +%global distro_build 200 %if 0%{?fedora} %define secure_boot_arch x86_64 @@ -106,25 +113,28 @@ Summary: The Linux kernel %define primary_target rhel %endif -%define rpmversion 5.12.17 -%define stableversion 5.12 -%define pkgrelease 301 +# The kernel tarball/base version +%define kversion 5.13 + +%define rpmversion 5.13.3 +%define stableversion 5.13 +%define pkgrelease 201 # This is needed to do merge window version magic -%define patchlevel 12 +%define patchlevel 13 # allow pkg_release to have configurable %%{?dist} tag -%define specrelease 301%{?buildid}%{?dist} +%define specrelease 201%{?buildid}%{?dist} %define pkg_release %{specrelease} -# What parts do we want to build? These are the kernels that are built IF the -# architecture allows it. All should default to 1 (enabled) and be flipped to -# 0 (disabled) by later arch-specific checks. +# libexec dir is not used by the linker, so the shared object there +# should not be exported to RPM provides +%global __provides_exclude_from ^%{_libexecdir}/kselftests -# The following build options are enabled by default. -# Use either --without <opt> in your rpmbuild command or force values -# to 0 in here to disable them. +# The following build options are enabled by default, but may become disabled +# by later architecture-specific checks. These can also be disabled by using +# --without <opt> in the rpmbuild command, or by forcing these values to 0. # # standard kernel %define with_up %{?_without_up: 0} %{?!_without_up: 1} @@ -132,6 +142,8 @@ Summary: The Linux kernel %define with_pae %{?_without_pae: 0} %{?!_without_pae: 1} # kernel-debug %define with_debug %{?_without_debug: 0} %{?!_without_debug: 1} +# kernel-zfcpdump (s390 specific kernel for zfcpdump) +%define with_zfcpdump %{?_without_zfcpdump: 0} %{?!_without_zfcpdump: 1} # kernel-doc %define with_doc %{?_without_doc: 0} %{?!_without_doc: 1} # kernel-headers @@ -145,10 +157,6 @@ Summary: The Linux kernel %define with_bpftool %{?_without_bpftool: 0} %{?!_without_bpftool: 1} # kernel-debuginfo %define with_debuginfo %{?_without_debuginfo: 0} %{?!_without_debuginfo: 1} -# Want to build a the vsdo directories installed -%define with_vdso_install %{?_without_vdso_install: 0} %{?!_without_vdso_install: 1} -# kernel-zfcpdump (s390 specific kernel for zfcpdump) -%define with_zfcpdump %{?_without_zfcpdump: 0} %{?!_without_zfcpdump: 1} # kernel-abi-whitelists %define with_kernel_abi_whitelists %{?_without_kernel_abi_whitelists: 0} %{?!_without_kernel_abi_whitelists: 1} # internal samples and selftests @@ -174,6 +182,9 @@ Summary: The Linux kernel %define with_kabidwchk %{?_without_kabidwchk: 0} %{?!_without_kabidwchk: 1} %define with_kabidw_base %{?_with_kabidw_base: 1} %{?!_with_kabidw_base: 0} # +# Control whether to install the vdso directories. +%define with_vdso_install %{?_without_vdso_install: 0} %{?!_without_vdso_install: 1} +# # should we do C=1 builds with sparse %define with_sparse %{?_with_sparse: 1} %{?!_with_sparse: 0} # @@ -201,20 +212,10 @@ Summary: The Linux kernel # Want to build a vanilla kernel build without any non-upstream patches? %define with_vanilla %{?_with_vanilla: 1} %{?!_with_vanilla: 0} -# Set debugbuildsenabled to 1 for production (build separate debug kernels) -# and 0 for rawhide (all kernels are debug kernels). -# See also 'make debug' and 'make release'. -%define debugbuildsenabled 1 - -# The kernel tarball/base version -%define kversion 5.12 - %if 0%{?fedora} # Kernel headers are being split out into a separate package %define with_headers 1 %define with_cross_headers 0 -# no selftests for now -%define with_selftests 0 # no ipa_clone for now %define with_ipaclones 0 # no whitelist @@ -223,6 +224,8 @@ Summary: The Linux kernel %define with_perf 0 %define with_tools 0 %define with_bpftool 0 +# selftests turns on bpftool +%define with_selftests 0 %endif %if %{with_verbose} @@ -243,6 +246,8 @@ Summary: The Linux kernel %define with_kabichk 0 %define with_kabidupchk 0 %define with_kabidwchk 0 +%define with_kabidw_base 0 +%define with_kernel_abi_whitelists 0 %endif # turn off kABI DWARF-based check if we're generating the base dataset @@ -276,8 +281,8 @@ Summary: The Linux kernel %define nopatches 1 %endif -%if %{nopatches} -%define variant -vanilla +%if %{with_release} +%define debugbuildsenabled 1 %endif %if !%{debugbuildsenabled} @@ -301,6 +306,15 @@ Summary: The Linux kernel %if %{with_baseonly} %define with_pae 0 %define with_debug 0 +%define with_vdso_install 0 +%define with_perf 0 +%define with_tools 0 +%define with_bpftool 0 +%define with_kernel_abi_whitelists 0 +%define with_selftests 0 +%define with_cross 0 +%define with_cross_headers 0 +%define with_ipaclones 0 %endif # if requested, only build pae kernel @@ -312,9 +326,15 @@ Summary: The Linux kernel # if requested, only build debug kernel %if %{with_dbgonly} %define with_up 0 -%define with_tools 0 +%define with_vdso_install 0 %define with_perf 0 +%define with_tools 0 %define with_bpftool 0 +%define with_kernel_abi_whitelists 0 +%define with_selftests 0 +%define with_cross 0 +%define with_cross_headers 0 +%define with_ipaclones 0 %endif # turn off kABI DUP check and DWARF-based check if kABI check is disabled @@ -327,6 +347,10 @@ Summary: The Linux kernel %define use_vdso 1 %endif +# selftests require bpftool to be built +%if %{with_selftests} +%define with_bpftool 1 +%endif %ifnarch noarch %define with_kernel_abi_whitelists 0 @@ -441,14 +465,6 @@ Summary: The Linux kernel %define with_configchecks 0 %endif -# Setting the compiler to clang enables some different config options -# than what is expected, so disable this check for now. -# TODO: What's the best way to fix this? Do wee need a different set of -# configs for clang? -%if %{with toolchain_clang} -%define with_configchecks 0 -%endif - # To temporarily exclude an architecture from being built, add it to # %%nobuildarches. Do _NOT_ use the ExclusiveArch: line, because if we # don't build kernel-headers then the new build system will no longer let @@ -504,7 +520,7 @@ Summary: The Linux kernel %define initrd_prereq dracut >= 027 -Name: kernel%{?variant} +Name: kernel License: GPLv2 and Redistributable, no modification permitted URL: https://www.kernel.org/ Version: %{rpmversion} @@ -518,21 +534,22 @@ ExclusiveArch: noarch i386 i686 x86_64 s390x %{arm} aarch64 ppc64le %endif ExclusiveOS: Linux %ifnarch %{nobuildarches} -Requires: kernel-core-uname-r = %{KVERREL}%{?variant} -Requires: kernel-modules-uname-r = %{KVERREL}%{?variant} +Requires: kernel-core-uname-r = %{KVERREL} +Requires: kernel-modules-uname-r = %{KVERREL} %endif # # List the packages used during the kernel build # -BuildRequires: kmod, patch, bash, tar, git-core +BuildRequires: kmod, patch, bash, coreutils, tar, git-core, which BuildRequires: bzip2, xz, findutils, gzip, m4, perl-interpreter, perl-Carp, perl-devel, perl-generators, make, diffutils, gawk BuildRequires: gcc, binutils, redhat-rpm-config, hmaccalc, bison, flex, gcc-c++ BuildRequires: net-tools, hostname, bc, elfutils-devel BuildRequires: dwarves BuildRequires: python3-devel BuildRequires: gcc-plugin-devel +BuildRequires: bpftool %if %{with_headers} BuildRequires: rsync %endif @@ -546,9 +563,15 @@ BuildRequires: sparse BuildRequires: zlib-devel binutils-devel newt-devel perl(ExtUtils::Embed) bison flex xz-devel BuildRequires: audit-libs-devel BuildRequires: java-devel +BuildRequires: libbpf-devel +BuildRequires: libbabeltrace-devel +BuildRequires: libtraceevent-devel %ifnarch %{arm} s390x BuildRequires: numactl-devel %endif +%ifarch aarch64 +BuildRequires: opencsd-devel >= 1.0.0 +%endif %endif %if %{with_tools} BuildRequires: gettext ncurses-devel @@ -566,7 +589,7 @@ BuildRequires: clang llvm %ifnarch %{arm} BuildRequires: numactl-devel %endif -BuildRequires: libcap-devel libcap-ng-devel rsync +BuildRequires: libcap-devel libcap-ng-devel rsync libmnl-devel %endif BuildConflicts: rhbuildsys(DiskFree) < 500Mb %if %{with_debuginfo} @@ -623,7 +646,7 @@ BuildRequires: clang # exact git commit you can run # # xzcat -qq ${TARBALL} | git get-tar-commit-id -Source0: linux-5.12.17.tar.xz +Source0: linux-5.13.3.tar.xz Source1: Makefile.rhelver @@ -685,7 +708,7 @@ Source13: redhatsecureboot003.cer Source22: mod-extra.list.rhel Source16: mod-extra.list.fedora -Source17: mod-blacklist.sh +Source17: mod-denylist.sh Source18: mod-sign.sh Source79: parallel_xz.sh @@ -736,7 +759,6 @@ Source50: kernel-x86_64-debug-fedora.config Source51: generate_all_configs.sh Source52: process_configs.sh -Source53: generate_bls_conf.sh Source56: update_scripts.sh Source54: mod-internal.list @@ -762,6 +784,7 @@ Source301: kernel-kabi-dw-%{rpmversion}-%{distro_build}.tar.bz2 # Sources for kernel-tools Source2000: cpupower.service Source2001: cpupower.config +Source2002: kvm_stat.logrotate # Some people enjoy building customized kernels from the dist-git in Fedora and # use this to override configuration options. One day they may all use the @@ -771,17 +794,20 @@ Source3001: kernel-local Source3003: Patchlist.changelog Source4000: README.rst +Source4001: rpminspect.yaml ## Patches needed for building this package %if !%{nopatches} Patch1: patch-%{stableversion}-redhat.patch +Patch2: usb-renesas-xhci-fix-handling-of-unknown-rom-state.patch # linux-fsync patches Patch200: zen.patch Patch201: futex2.patch Patch202: OpenRGB.patch +Patch203: winesync.patch %endif # empty final patch to facilitate testing of kernel patches @@ -802,7 +828,7 @@ The kernel meta package Provides: kernel = %{rpmversion}-%{pkg_release}\ Provides: kernel-%{_target_cpu} = %{rpmversion}-%{pkg_release}%{?1:+%{1}}\ Provides: kernel-drm-nouveau = 16\ -Provides: kernel-uname-r = %{KVERREL}%{?variant}%{?1:+%{1}}\ +Provides: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\ Requires(pre): %{kernel_prereq}\ Requires(pre): %{initrd_prereq}\ Requires(pre): linux-firmware >= 20150904-56.git6ebf5d57\ @@ -836,10 +862,6 @@ options that can be passed to Linux kernel modules at load time. Summary: Header files for the Linux kernel for use by glibc Obsoletes: glibc-kernheaders < 3.0-46 Provides: glibc-kernheaders = 3.0-46 -%if "0%{?variant}" -Obsoletes: kernel-headers < %{rpmversion}-%{pkg_release} -Provides: kernel-headers = %{rpmversion}-%{pkg_release} -%endif %description headers Kernel-headers includes the C header files that specify the interface between the Linux kernel and userspace libraries and programs. The @@ -867,6 +889,7 @@ It provides the kernel source files common to all builds. %if %{with_perf} %package -n perf Summary: Performance monitoring for the Linux kernel +Requires: bzip2 License: GPLv2 %description -n perf This package contains the perf tool, which enables performance monitoring @@ -883,7 +906,7 @@ This package provides debug information for the perf package. # symlinks because of the trailing nonmatching alternation and # the leading .*, because of find-debuginfo.sh's buggy handling # of matching the pattern against the symlinks file. -%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_bindir}/perf(\.debug)?|.*%%{_libexecdir}/perf-core/.*|.*%%{_libdir}/traceevent/plugins/.*|.*%%{_libdir}/libperf-jvmti.so(\.debug)?|XXX' -o perf-debuginfo.list} +%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_bindir}/perf(\.debug)?|.*%%{_libexecdir}/perf-core/.*|.*%%{_libdir}/libperf-jvmti.so(\.debug)?|XXX' -o perf-debuginfo.list} %package -n python3-perf Summary: Python bindings for apps which will manipulate perf events @@ -956,7 +979,7 @@ This package provides debug information for package kernel-tools. # symlinks because of the trailing nonmatching alternation and # the leading .*, because of find-debuginfo.sh's buggy handling # of matching the pattern against the symlinks file. -%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_bindir}/centrino-decode(\.debug)?|.*%%{_bindir}/powernow-k8-decode(\.debug)?|.*%%{_bindir}/cpupower(\.debug)?|.*%%{_libdir}/libcpupower.*|.*%%{_bindir}/turbostat(\.debug)?|.*%%{_bindir}/x86_energy_perf_policy(\.debug)?|.*%%{_bindir}/tmon(\.debug)?|.*%%{_bindir}/lsgpio(\.debug)?|.*%%{_bindir}/gpio-hammer(\.debug)?|.*%%{_bindir}/gpio-event-mon(\.debug)?|.*%%{_bindir}/gpio-watch(\.debug)?|.*%%{_bindir}/iio_event_monitor(\.debug)?|.*%%{_bindir}/iio_generic_buffer(\.debug)?|.*%%{_bindir}/lsiio(\.debug)?|.*%%{_bindir}/intel-speed-select(\.debug)?|XXX' -o kernel-tools-debuginfo.list} +%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_bindir}/centrino-decode(\.debug)?|.*%%{_bindir}/powernow-k8-decode(\.debug)?|.*%%{_bindir}/cpupower(\.debug)?|.*%%{_libdir}/libcpupower.*|.*%%{_bindir}/turbostat(\.debug)?|.*%%{_bindir}/x86_energy_perf_policy(\.debug)?|.*%%{_bindir}/tmon(\.debug)?|.*%%{_bindir}/lsgpio(\.debug)?|.*%%{_bindir}/gpio-hammer(\.debug)?|.*%%{_bindir}/gpio-event-mon(\.debug)?|.*%%{_bindir}/gpio-watch(\.debug)?|.*%%{_bindir}/iio_event_monitor(\.debug)?|.*%%{_bindir}/iio_generic_buffer(\.debug)?|.*%%{_bindir}/lsiio(\.debug)?|.*%%{_bindir}/intel-speed-select(\.debug)?|.*%%{_bindir}/page_owner_sort(\.debug)?|.*%%{_bindir}/slabinfo(\.debug)?|XXX' -o kernel-tools-debuginfo.list} # with_tools %endif @@ -988,8 +1011,7 @@ This package provides debug information for the bpftool package. %package selftests-internal Summary: Kernel samples and selftests License: GPLv2 -Requires: binutils, bpftool, iproute-tc, nmap-ncat -Requires: kernel-modules-internal = %{version}-%{release} +Requires: binutils, bpftool, iproute-tc, nmap-ncat, python3 %description selftests-internal Kernel sample programs and selftests. @@ -1018,13 +1040,13 @@ Linux kernel ABI, including lists of kernel symbols that are needed by external Linux kernel modules, and a yum plugin to aid enforcement. %if %{with_kabidw_base} -%package kabidw-base +%package kernel-kabidw-base-internal Summary: The baseline dataset for kABI verification using DWARF data Group: System Environment/Kernel AutoReqProv: no -%description kabidw-base -The kabidw-base package contains data describing the current ABI of the Red Hat -Enterprise Linux kernel, suitable for the kabi-dw tool. +%description kernel-kabidw-base-internal +The package contains data describing the current ABI of the Red Hat Enterprise +Linux kernel, suitable for the kabi-dw tool. %endif # @@ -1051,14 +1073,14 @@ This is required to use SystemTap with %{name}%{?1:-%{1}}-%{KVERREL}.\ # # This macro creates a kernel-<subpackage>-devel package. -# %%kernel_devel_package <subpackage> <pretty-name> +# %%kernel_devel_package [-m] <subpackage> <pretty-name> # -%define kernel_devel_package() \ +%define kernel_devel_package(m) \ %package %{?1:%{1}-}devel\ Summary: Development package for building kernel modules to match the %{?2:%{2} }kernel\ Provides: kernel%{?1:-%{1}}-devel-%{_target_cpu} = %{version}-%{release}\ Provides: kernel-devel-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\ -Provides: kernel-devel-uname-r = %{KVERREL}%{?variant}%{?1:+%{1}}\ +Provides: kernel-devel-uname-r = %{KVERREL}%{?1:+%{1}}\ Provides: installonlypkg(kernel)\ AutoReqProv: no\ Requires(pre): findutils\ @@ -1070,6 +1092,9 @@ Requires: bison\ Requires: flex\ Requires: make\ Requires: gcc\ +%if %{-m:1}%{!-m:0}\ +Requires: kernel-devel-uname-r = %{KVERREL}\ +%endif\ %description %{?1:%{1}-}devel\ This package provides kernel headers and makefiles sufficient to build modules\ against the %{?2:%{2} }kernel package.\ @@ -1099,9 +1124,9 @@ Provides: kernel%{?1:-%{1}}-modules-internal-%{_target_cpu} = %{version}-%{relea Provides: kernel%{?1:-%{1}}-modules-internal-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\ Provides: kernel%{?1:-%{1}}-modules-internal = %{version}-%{release}%{?1:+%{1}}\ Provides: installonlypkg(kernel-module)\ -Provides: kernel%{?1:-%{1}}-modules-internal-uname-r = %{KVERREL}%{?variant}%{?1:+%{1}}\ -Requires: kernel-uname-r = %{KVERREL}%{?variant}%{?1:+%{1}}\ -Requires: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?variant}%{?1:+%{1}}\ +Provides: kernel%{?1:-%{1}}-modules-internal-uname-r = %{KVERREL}%{?1:+%{1}}\ +Requires: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\ +Requires: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?1:+%{1}}\ AutoReq: no\ AutoProv: yes\ %description %{?1:%{1}-}modules-internal\ @@ -1110,18 +1135,21 @@ This package provides kernel modules for the %{?2:%{2} }kernel package for Red H # # This macro creates a kernel-<subpackage>-modules-extra package. -# %%kernel_modules_extra_package <subpackage> <pretty-name> +# %%kernel_modules_extra_package [-m] <subpackage> <pretty-name> # -%define kernel_modules_extra_package() \ +%define kernel_modules_extra_package(m) \ %package %{?1:%{1}-}modules-extra\ Summary: Extra kernel modules to match the %{?2:%{2} }kernel\ Provides: kernel%{?1:-%{1}}-modules-extra-%{_target_cpu} = %{version}-%{release}\ Provides: kernel%{?1:-%{1}}-modules-extra-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\ Provides: kernel%{?1:-%{1}}-modules-extra = %{version}-%{release}%{?1:+%{1}}\ Provides: installonlypkg(kernel-module)\ -Provides: kernel%{?1:-%{1}}-modules-extra-uname-r = %{KVERREL}%{?variant}%{?1:+%{1}}\ -Requires: kernel-uname-r = %{KVERREL}%{?variant}%{?1:+%{1}}\ -Requires: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?variant}%{?1:+%{1}}\ +Provides: kernel%{?1:-%{1}}-modules-extra-uname-r = %{KVERREL}%{?1:+%{1}}\ +Requires: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\ +Requires: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?1:+%{1}}\ +%if %{-m:1}%{!-m:0}\ +Requires: kernel-modules-extra-uname-r = %{KVERREL}\ +%endif\ AutoReq: no\ AutoProv: yes\ %description %{?1:%{1}-}modules-extra\ @@ -1130,17 +1158,20 @@ This package provides less commonly used kernel modules for the %{?2:%{2} }kerne # # This macro creates a kernel-<subpackage>-modules package. -# %%kernel_modules_package <subpackage> <pretty-name> +# %%kernel_modules_package [-m] <subpackage> <pretty-name> # -%define kernel_modules_package() \ +%define kernel_modules_package(m) \ %package %{?1:%{1}-}modules\ Summary: kernel modules to match the %{?2:%{2}-}core kernel\ Provides: kernel%{?1:-%{1}}-modules-%{_target_cpu} = %{version}-%{release}\ Provides: kernel-modules-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\ Provides: kernel-modules = %{version}-%{release}%{?1:+%{1}}\ Provides: installonlypkg(kernel-module)\ -Provides: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?variant}%{?1:+%{1}}\ -Requires: kernel-uname-r = %{KVERREL}%{?variant}%{?1:+%{1}}\ +Provides: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?1:+%{1}}\ +Requires: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\ +%if %{-m:1}%{!-m:0}\ +Requires: kernel-modules-uname-r = %{KVERREL}\ +%endif\ AutoReq: no\ AutoProv: yes\ %description %{?1:%{1}-}modules\ @@ -1154,8 +1185,8 @@ This package provides commonly used kernel modules for the %{?2:%{2}-}core kerne %define kernel_meta_package() \ %package %{1}\ summary: kernel meta-package for the %{1} kernel\ -Requires: kernel-%{1}-core-uname-r = %{KVERREL}%{?variant}+%{1}\ -Requires: kernel-%{1}-modules-uname-r = %{KVERREL}%{?variant}+%{1}\ +Requires: kernel-%{1}-core-uname-r = %{KVERREL}+%{1}\ +Requires: kernel-%{1}-modules-uname-r = %{KVERREL}+%{1}\ Provides: installonlypkg(kernel)\ %description %{1}\ The meta-package for the %{1} kernel\ @@ -1164,22 +1195,27 @@ The meta-package for the %{1} kernel\ # # This macro creates a kernel-<subpackage> and its -devel and -debuginfo too. # %%define variant_summary The Linux kernel compiled for <configuration> -# %%kernel_variant_package [-n <pretty-name>] <subpackage> +# %%kernel_variant_package [-n <pretty-name>] [-m] <subpackage> # -%define kernel_variant_package(n:) \ +%define kernel_variant_package(n:m) \ %package %{?1:%{1}-}core\ Summary: %{variant_summary}\ -Provides: kernel-%{?1:%{1}-}core-uname-r = %{KVERREL}%{?variant}%{?1:+%{1}}\ +Provides: kernel-%{?1:%{1}-}core-uname-r = %{KVERREL}%{?1:+%{1}}\ Provides: installonlypkg(kernel)\ +%if %{-m:1}%{!-m:0}\ +Requires: kernel-core-uname-r = %{KVERREL}\ +%endif\ %{expand:%%kernel_reqprovconf}\ %if %{?1:1} %{!?1:0} \ %{expand:%%kernel_meta_package %{?1:%{1}}}\ %endif\ -%{expand:%%kernel_devel_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}}}\ -%{expand:%%kernel_modules_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}}}\ -%{expand:%%kernel_modules_extra_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}}}\ +%{expand:%%kernel_devel_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\ +%{expand:%%kernel_modules_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\ +%{expand:%%kernel_modules_extra_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\ +%if %{-m:0}%{!-m:1}\ %{expand:%%kernel_modules_internal_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}}}\ %{expand:%%kernel_debuginfo_package %{?1:%{1}}}\ +%endif\ %{nil} # Now, each variant package. @@ -1202,7 +1238,11 @@ zfcpdump infrastructure. %endif %define variant_summary The Linux kernel compiled with extra debugging enabled +%if !%{debugbuildsenabled} +%kernel_variant_package -m debug +%else %kernel_variant_package debug +%endif %description debug-core The kernel package contains the Linux kernel (vmlinuz), the core of any Linux operating system. The kernel handles the basic functions @@ -1254,7 +1294,7 @@ ApplyPatch() if [ ! -f $RPM_SOURCE_DIR/$patch ]; then exit 1 fi - if ! grep -E "^Patch[0-9]+: $patch\$" %{_specdir}/${RPM_PACKAGE_NAME%%%%%{?variant}}.spec ; then + if ! grep -E "^Patch[0-9]+: $patch\$" %{_specdir}/${RPM_PACKAGE_NAME}.spec ; then if [ "${patch:0:8}" != "patch-5." ] ; then echo "ERROR: Patch $patch not listed as a source patch in specfile" exit 1 @@ -1282,8 +1322,8 @@ ApplyOptionalPatch() fi } -%setup -q -n kernel-5.12.17 -c -mv linux-5.12.17 linux-%{KVERREL} +%setup -q -n kernel-5.13.3 -c +mv linux-5.13.3 linux-%{KVERREL} cd linux-%{KVERREL} cp -a %{SOURCE1} . @@ -1291,11 +1331,13 @@ cp -a %{SOURCE1} . %if !%{nopatches} ApplyOptionalPatch patch-%{stableversion}-redhat.patch +ApplyOptionalPatch usb-renesas-xhci-fix-handling-of-unknown-rom-state.patch # linux-fsync patches ApplyOptionalPatch zen.patch ApplyOptionalPatch futex2.patch ApplyOptionalPatch OpenRGB.patch +ApplyOptionalPatch winesync.patch %endif ApplyOptionalPatch linux-kernel-test.patch @@ -1428,19 +1470,18 @@ InitBuildVars() { # Initialize the kernel .config file and create some variables that are # needed for the actual build process. - Flavour=$1 - Flav=${Flavour:++${Flavour}} + Variant=$1 # Pick the right kernel config file - Config=kernel-%{version}-%{_target_cpu}${Flavour:+-${Flavour}}.config - DevelDir=/usr/src/kernels/%{KVERREL}${Flav} + Config=kernel-%{version}-%{_target_cpu}${Variant:+-${Variant}}.config + DevelDir=/usr/src/kernels/%{KVERREL}${Variant:++${Variant}} - KernelVer=%{version}-%{release}.%{_target_cpu}${Flav} + KernelVer=%{version}-%{release}.%{_target_cpu}${Variant:++${Variant}} # make sure EXTRAVERSION says what we want it to say # Trim the release if this is a CI build, since KERNELVERSION is limited to 64 characters ShortRel=$(perl -e "print \"%{release}\" =~ s/\.pr\.[0-9A-Fa-f]{32}//r") - perl -p -i -e "s/^EXTRAVERSION.*/EXTRAVERSION = -${ShortRel}.%{_target_cpu}${Flav}/" Makefile + perl -p -i -e "s/^EXTRAVERSION.*/EXTRAVERSION = -${ShortRel}.%{_target_cpu}${Variant:++${Variant}}/" Makefile # if pre-rc1 devel kernel, must fix up PATCHLEVEL for our versioning scheme # if we are post rc1 this should match anyway so this won't matter @@ -1459,7 +1500,7 @@ InitBuildVars() { KCFLAGS="%{?kcflags}" # add kpatch flags for base kernel - if [ "$Flavour" == "" ]; then + if [ "$Variant" == "" ]; then KCFLAGS="$KCFLAGS %{?kpatch_kcflags}" fi } @@ -1467,13 +1508,12 @@ InitBuildVars() { BuildKernel() { MakeTarget=$1 KernelImage=$2 - Flavour=$4 DoVDSO=$3 - Flav=${Flavour:++${Flavour}} + Variant=$4 InstallName=${5:-vmlinuz} DoModules=1 - if [ "$Flavour" = "zfcpdump" ]; then + if [ "$Variant" = "zfcpdump" ]; then DoModules=0 fi @@ -1485,9 +1525,9 @@ BuildKernel() { CopyKernel=cp fi - InitBuildVars $Flavour + InitBuildVars $Variant - echo BUILDING A KERNEL FOR ${Flavour} %{_target_cpu}... + echo BUILDING A KERNEL FOR ${Variant} %{_target_cpu}... %{make} ARCH=$Arch olddefconfig >/dev/null @@ -1598,13 +1638,13 @@ BuildKernel() { %endif # add an a noop %%defattr statement 'cause rpm doesn't like empty file list files - echo '%%defattr(-,-,-)' > ../kernel${Flavour:+-${Flavour}}-ldsoconf.list + echo '%%defattr(-,-,-)' > ../kernel${Variant:+-${Variant}}-ldsoconf.list if [ $DoVDSO -ne 0 ]; then %{make} ARCH=$Arch INSTALL_MOD_PATH=$RPM_BUILD_ROOT vdso_install KERNELRELEASE=$KernelVer if [ -s ldconfig-kernel.conf ]; then install -D -m 444 ldconfig-kernel.conf \ $RPM_BUILD_ROOT/etc/ld.so.conf.d/kernel-$KernelVer.conf - echo /etc/ld.so.conf.d/kernel-$KernelVer.conf >> ../kernel${Flavour:+-${Flavour}}-ldsoconf.list + echo /etc/ld.so.conf.d/kernel-$KernelVer.conf >> ../kernel${Variant:+-${Variant}}-ldsoconf.list fi rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/vdso/.build-id @@ -1651,8 +1691,8 @@ BuildKernel() { %if %{with_kabichk} echo "**** kABI checking is enabled in kernel SPEC file. ****" chmod 0755 $RPM_SOURCE_DIR/check-kabi - if [ -e $RPM_SOURCE_DIR/Module.kabi_%{_target_cpu}$Flavour ]; then - cp $RPM_SOURCE_DIR/Module.kabi_%{_target_cpu}$Flavour $RPM_BUILD_ROOT/Module.kabi + if [ -e $RPM_SOURCE_DIR/Module.kabi_%{_target_cpu}$Variant ]; then + cp $RPM_SOURCE_DIR/Module.kabi_%{_target_cpu}$Variant $RPM_BUILD_ROOT/Module.kabi $RPM_SOURCE_DIR/check-kabi -k $RPM_BUILD_ROOT/Module.kabi -s Module.symvers || exit 1 # for now, don't keep it around. rm $RPM_BUILD_ROOT/Module.kabi @@ -1663,8 +1703,8 @@ BuildKernel() { %if %{with_kabidupchk} echo "**** kABI DUP checking is enabled in kernel SPEC file. ****" - if [ -e $RPM_SOURCE_DIR/Module.kabi_dup_%{_target_cpu}$Flavour ]; then - cp $RPM_SOURCE_DIR/Module.kabi_dup_%{_target_cpu}$Flavour $RPM_BUILD_ROOT/Module.kabi + if [ -e $RPM_SOURCE_DIR/Module.kabi_dup_%{_target_cpu}$Variant ]; then + cp $RPM_SOURCE_DIR/Module.kabi_dup_%{_target_cpu}$Variant $RPM_BUILD_ROOT/Module.kabi $RPM_SOURCE_DIR/check-kabi -k $RPM_BUILD_ROOT/Module.kabi -s Module.symvers || exit 1 # for now, don't keep it around. rm $RPM_BUILD_ROOT/Module.kabi @@ -1675,7 +1715,7 @@ BuildKernel() { %if %{with_kabidw_base} # Don't build kabi base for debug kernels - if [ "$Flavour" != "kdump" -a "$Flavour" != "debug" ]; then + if [ "$Variant" != "zfcpdump" -a "$Variant" != "debug" ]; then mkdir -p $RPM_BUILD_ROOT/kabi-dwarf tar xjvf %{SOURCE301} -C $RPM_BUILD_ROOT/kabi-dwarf @@ -1687,17 +1727,17 @@ BuildKernel() { $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh generate \ "$RPM_BUILD_ROOT/kabi-dwarf/whitelists/kabi-current/kabi_whitelist_%{_target_cpu}" \ "$(pwd)" \ - "$RPM_BUILD_ROOT/kabidw-base/%{_target_cpu}${Flavour:+.${Flavour}}" || : + "$RPM_BUILD_ROOT/kabidw-base/%{_target_cpu}${Variant:+.${Variant}}" || : rm -rf $RPM_BUILD_ROOT/kabi-dwarf fi %endif %if %{with_kabidwchk} - if [ "$Flavour" != "kdump" ]; then + if [ "$Variant" != "zfcpdump" ]; then mkdir -p $RPM_BUILD_ROOT/kabi-dwarf tar xjvf %{SOURCE301} -C $RPM_BUILD_ROOT/kabi-dwarf - if [ -d "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Flavour:+.${Flavour}}" ]; then + if [ -d "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}" ]; then mkdir -p $RPM_BUILD_ROOT/kabi-dwarf/whitelists tar xjvf %{SOURCE300} -C $RPM_BUILD_ROOT/kabi-dwarf/whitelists @@ -1706,12 +1746,12 @@ BuildKernel() { $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh generate \ "$RPM_BUILD_ROOT/kabi-dwarf/whitelists/kabi-current/kabi_whitelist_%{_target_cpu}" \ "$(pwd)" \ - "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Flavour:+.${Flavour}}.tmp" || : + "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}.tmp" || : echo "**** kABI DWARF-based comparison report ****" $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh compare \ - "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Flavour:+.${Flavour}}" \ - "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Flavour:+.${Flavour}}.tmp" || : + "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}" \ + "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}.tmp" || : echo "**** End of kABI DWARF-based comparison report ****" else echo "**** Baseline dataset for kABI DWARF-BASED comparison report not found ****" @@ -1779,8 +1819,7 @@ BuildKernel() { if [ -f arch/%{asmarch}/kernel/module.lds ]; then cp -a --parents arch/%{asmarch}/kernel/module.lds $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ fi - rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/*.o - rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/*/*.o + find $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts \( -iname "*.o" -o -iname "*.cmd" \) -exec rm -f {} + %ifarch ppc64le cp -a --parents arch/powerpc/lib/crtsavres.[So] $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ %endif @@ -1795,8 +1834,8 @@ BuildKernel() { %endif # include the machine specific headers for ARM variants, if available. %ifarch %{arm} - if [ -d arch/%{asmarch}/mach-${Flavour}/include ]; then - cp -a --parents arch/%{asmarch}/mach-${Flavour}/include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ + if [ -d arch/%{asmarch}/mach-${Variant}/include ]; then + cp -a --parents arch/%{asmarch}/mach-${Variant}/include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ fi # include a few files for 'make prepare' cp -a --parents arch/arm/tools/gen-mach-types $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ @@ -1966,11 +2005,11 @@ BuildKernel() { # Make sure the files lists start with absolute paths or rpmbuild fails. # Also add in the dir entries - sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/k-d.list > ../kernel${Flavour:+-${Flavour}}-modules.list - sed -e 's/^lib*/%dir \/lib/' %{?zipsed} $RPM_BUILD_ROOT/module-dirs.list > ../kernel${Flavour:+-${Flavour}}-core.list - sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/modules.list >> ../kernel${Flavour:+-${Flavour}}-core.list - sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/mod-extra.list >> ../kernel${Flavour:+-${Flavour}}-modules-extra.list - sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/mod-internal.list >> ../kernel${Flavour:+-${Flavour}}-modules-internal.list + sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/k-d.list > ../kernel${Variant:+-${Variant}}-modules.list + sed -e 's/^lib*/%dir \/lib/' %{?zipsed} $RPM_BUILD_ROOT/module-dirs.list > ../kernel${Variant:+-${Variant}}-core.list + sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/modules.list >> ../kernel${Variant:+-${Variant}}-core.list + sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/mod-extra.list >> ../kernel${Variant:+-${Variant}}-modules-extra.list + sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/mod-internal.list >> ../kernel${Variant:+-${Variant}}-modules-internal.list # Cleanup rm -f $RPM_BUILD_ROOT/k-d.list @@ -1982,8 +2021,8 @@ BuildKernel() { %if %{signmodules} if [ $DoModules -eq 1 ]; then # Save the signing keys so we can sign the modules in __modsign_install_post - cp certs/signing_key.pem certs/signing_key.pem.sign${Flav} - cp certs/signing_key.x509 certs/signing_key.x509.sign${Flav} + cp certs/signing_key.pem certs/signing_key.pem.sign${Variant:++${Variant}} + cp certs/signing_key.x509 certs/signing_key.x509.sign${Variant:++${Variant}} fi %endif @@ -1997,12 +2036,14 @@ BuildKernel() { # the F17 UsrMove feature. ln -sf $DevelDir $RPM_BUILD_ROOT/lib/modules/$KernelVer/build +%ifnarch armv7hl + # Generate vmlinux.h and put it to kernel-devel path + #bpftool btf dump file vmlinux format c > $RPM_BUILD_ROOT/$DevelDir/vmlinux.h +%endif + # prune junk from kernel-devel find $RPM_BUILD_ROOT/usr/src/kernels -name ".*.cmd" -delete - # build a BLS config for this kernel - %{SOURCE53} "$KernelVer" "$RPM_BUILD_ROOT" "%{?variant}" - # Red Hat UEFI Secure Boot CA cert, which can be used to authenticate the kernel mkdir -p $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer %ifarch x86_64 aarch64 @@ -2017,8 +2058,8 @@ BuildKernel() { if [ -x /usr/bin/rpm-sign ]; then install -m 0644 %{secureboot_key_0} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename} else - install -m 0644 certs/signing_key.x509.sign${Flav} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca.cer - openssl x509 -in certs/signing_key.pem.sign${Flav} -outform der -out $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename} + install -m 0644 certs/signing_key.x509.sign${Variant:++${Variant}} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca.cer + openssl x509 -in certs/signing_key.pem.sign${Variant:++${Variant}} -outform der -out $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename} chmod 0644 $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename} fi fi @@ -2029,7 +2070,7 @@ BuildKernel() { if [ -z "$MAXPROCS" ]; then MAXPROCS=1 fi - if [ "$Flavour" == "" ]; then + if [ "$Variant" == "" ]; then mkdir -p $RPM_BUILD_ROOT/$DevelDir-ipaclones find . -name '*.ipa-clones' | xargs -i{} -r -n 1 -P $MAXPROCS install -m 644 -D "{}" "$RPM_BUILD_ROOT/$DevelDir-ipaclones/{}" fi @@ -2066,15 +2107,18 @@ BuildKernel %make_target %kernel_image %{_use_vdso} %endif %ifnarch noarch i686 -%if !%{with_debug} && !%{with_zfcpdump} && !%{with_up} +%if !%{with_debug} && !%{with_zfcpdump} && !%{with_pae} && !%{with_up} # If only building the user space tools, then initialize the build environment # and some variables so that the various userspace tools can be built. InitBuildVars %endif %endif +%ifarch aarch64 +%global perf_build_extra_opts CORESIGHT=1 +%endif %global perf_make \ - %{__make} -s EXTRA_CFLAGS="${RPM_OPT_FLAGS}" LDFLAGS="%{__global_ldflags}" %{?cross_opts} -C tools/perf V=1 NO_PERF_READ_VDSO32=1 NO_PERF_READ_VDSOX32=1 WERROR=0 NO_LIBUNWIND=1 HAVE_CPLUS_DEMANGLE=1 NO_GTK2=1 NO_STRLCPY=1 NO_BIONIC=1 prefix=%{_prefix} PYTHON=%{__python3} + %{__make} %{?make_opts} EXTRA_CFLAGS="${RPM_OPT_FLAGS}" LDFLAGS="%{__global_ldflags}" %{?cross_opts} -C tools/perf V=1 NO_PERF_READ_VDSO32=1 NO_PERF_READ_VDSOX32=1 WERROR=0 NO_LIBUNWIND=1 HAVE_CPLUS_DEMANGLE=1 NO_GTK2=1 NO_STRLCPY=1 NO_BIONIC=1 LIBBPF_DYNAMIC=1 LIBTRACEEVENT_DYNAMIC=1 %{?perf_build_extra_opts} prefix=%{_prefix} PYTHON=%{__python3} %if %{with_perf} # perf # make sure check-headers.sh is executable @@ -2083,14 +2127,14 @@ chmod +x tools/perf/check-headers.sh %endif %global tools_make \ - %{make} CFLAGS="${RPM_OPT_FLAGS}" LDFLAGS="%{__global_ldflags}" V=1 + %{make} CFLAGS="${RPM_OPT_FLAGS}" LDFLAGS="%{__global_ldflags}" %{?make_opts} %if %{with_tools} %ifarch %{cpupowerarchs} # cpupower # make sure version-gen.sh is executable. chmod +x tools/power/cpupower/utils/version-gen.sh -%{tools_make} %{?_smp_mflags} -C tools/power/cpupower CPUFREQ_BENCH=false +%{tools_make} %{?_smp_mflags} -C tools/power/cpupower CPUFREQ_BENCH=false DEBUG=false %ifarch x86_64 pushd tools/power/cpupower/debug/x86_64 %{tools_make} %{?_smp_mflags} centrino-decode powernow-k8-decode @@ -2119,10 +2163,18 @@ pushd tools/gpio/ # Needs to be fixed to pick up CFLAGS %{__make} popd +# build VM tools +pushd tools/vm/ +%{tools_make} slabinfo page_owner_sort +popd %endif +if [ -f $DevelDir/vmlinux.h ]; then + RPM_VMLINUX_H=$DevelDir/vmlinux.h +fi + %global bpftool_make \ - %{__make} EXTRA_CFLAGS="${RPM_OPT_FLAGS}" EXTRA_LDFLAGS="%{__global_ldflags}" DESTDIR=$RPM_BUILD_ROOT V=1 + %{__make} EXTRA_CFLAGS="${RPM_OPT_FLAGS}" EXTRA_LDFLAGS="%{__global_ldflags}" DESTDIR=$RPM_BUILD_ROOT %{?make_opts} VMLINUX_H="${RPM_VMLINUX_H}" V=1 %if %{with_bpftool} pushd tools/bpf/bpftool %{bpftool_make} @@ -2130,12 +2182,36 @@ popd %endif %if %{with_selftests} -%{make} -s %{?_smp_mflags} ARCH=$Arch V=1 samples/bpf/ +# Unfortunately, samples/bpf/Makefile expects that the headers are installed +# in the source tree. We installed them previously to $RPM_BUILD_ROOT/usr +# but there's no way to tell the Makefile to take them from there. +%{make} %{?_smp_mflags} headers_install +%{make} %{?_smp_mflags} ARCH=$Arch V=1 samples/bpf/ + +# Prevent bpf selftests to build bpftool repeatedly: +export BPFTOOL=$(pwd)/tools/bpf/bpftool/bpftool + pushd tools/testing/selftests # We need to install here because we need to call make with ARCH set which # doesn't seem possible to do in the install section. -%{make} -s %{?_smp_mflags} ARCH=$Arch V=1 TARGETS="bpf livepatch net" INSTALL_PATH=%{buildroot}%{_libexecdir}/kselftests install +%{make} %{?_smp_mflags} ARCH=$Arch V=1 TARGETS="bpf livepatch net net/forwarding net/mptcp netfilter tc-testing" SKIP_TARGETS="" INSTALL_PATH=%{buildroot}%{_libexecdir}/kselftests VMLINUX_H="${RPM_VMLINUX_H}" install + +# 'make install' for bpf is broken and upstream refuses to fix it. +# Install the needed files manually. +for dir in bpf bpf/no_alu32 bpf/progs; do + # In ARK, the rpm build continues even if some of the selftests + # cannot be built. It's not always possible to build selftests, + # as upstream sometimes dependens on too new llvm version or has + # other issues. If something did not get built, just skip it. + test -d $dir || continue + mkdir -p %{buildroot}%{_libexecdir}/kselftests/$dir + find $dir -maxdepth 1 -type f \( -executable -o -name '*.py' -o -name settings -o \ + -name 'btf_dump_test_case_*.c' -o \ + -name '*.o' -exec sh -c 'readelf -h "{}" | grep -q "^ Machine:.*BPF"' \; \) -print0 | \ + xargs -0 cp -t %{buildroot}%{_libexecdir}/kselftests/$dir || true +done popd +export -n BPFTOOL %endif %if %{with_doc} @@ -2147,18 +2223,18 @@ chmod -R a=rX Documentation find Documentation -type d | xargs chmod u+w %endif -# In the modsign case, we do 3 things. 1) We check the "flavour" and hard +# In the modsign case, we do 3 things. 1) We check the "variant" and hard # code the value in the following invocations. This is somewhat sub-optimal # but we're doing this inside of an RPM macro and it isn't as easy as it # could be because of that. 2) We restore the .tmp_versions/ directory from # the one we saved off in BuildKernel above. This is to make sure we're -# signing the modules we actually built/installed in that flavour. 3) We +# signing the modules we actually built/installed in that variant. 3) We # grab the arch and invoke mod-sign.sh command to actually sign the modules. # # We have to do all of those things _after_ find-debuginfo runs, otherwise # that will strip the signature off of the modules. # -# Don't sign modules for the zfcpdump flavour as it is monolithic. +# Don't sign modules for the zfcpdump variant as it is monolithic. %define __modsign_install_post \ if [ "%{signmodules}" -eq "1" ]; then \ @@ -2287,7 +2363,7 @@ tar xjvf %{SOURCE300} -C $INSTALL_KABI_PATH %if %{with_perf} # perf tool binary and supporting scripts/binaries -%{perf_make} DESTDIR=$RPM_BUILD_ROOT lib=%{_lib} install-bin install-traceevent-plugins +%{perf_make} DESTDIR=$RPM_BUILD_ROOT lib=%{_lib} install-bin # remove the 'trace' symlink. rm -f %{buildroot}%{_bindir}/trace @@ -2297,12 +2373,7 @@ rm -f %{buildroot}%{_bindir}/trace # remove examples rm -rf %{buildroot}/usr/lib/perf/examples -# remove the stray files that somehow got packaged -rm -rf %{buildroot}/usr/lib/perf/include/bpf/bpf.h -rm -rf %{buildroot}/usr/lib/perf/include/bpf/stdio.h -rm -rf %{buildroot}/usr/lib/perf/include/bpf/linux/socket.h -rm -rf %{buildroot}/usr/lib/perf/include/bpf/pid_filter.h -rm -rf %{buildroot}/usr/lib/perf/include/bpf/unistd.h +rm -rf %{buildroot}/usr/lib/perf/include # python-perf extension %{perf_make} DESTDIR=$RPM_BUILD_ROOT install-python_ext @@ -2350,18 +2421,27 @@ popd pushd tools/gpio %{__make} DESTDIR=%{buildroot} install popd +install -m644 -D %{SOURCE2002} %{buildroot}%{_sysconfdir}/logrotate.d/kvm_stat pushd tools/kvm/kvm_stat %{__make} INSTALL_ROOT=%{buildroot} install-tools %{__make} INSTALL_ROOT=%{buildroot} install-man +install -m644 -D kvm_stat.service %{buildroot}%{_unitdir}/kvm_stat.service +popd +# install VM tools +pushd tools/vm/ +install -m755 slabinfo %{buildroot}%{_bindir}/slabinfo +install -m755 page_owner_sort %{buildroot}%{_bindir}/page_owner_sort popd %endif +if [ -f $DevelDir/vmlinux.h ]; then + RPM_VMLINUX_H=$DevelDir/vmlinux.h +fi + %if %{with_bpftool} pushd tools/bpf/bpftool %{bpftool_make} prefix=%{_prefix} bash_compdir=%{_sysconfdir}/bash_completion.d/ mandir=%{_mandir} install doc-install popd -# man-pages packages this (rhbz #1686954, #1918707) -rm %{buildroot}%{_mandir}/man7/bpf-helpers.7 %endif %if %{with_selftests} @@ -2375,6 +2455,7 @@ install -m755 *.sh %{buildroot}%{_libexecdir}/ksamples/bpf # test_lwt_bpf.sh compiles test_lwt_bpf.c when run; this works only from the # kernel tree. Just remove it. rm %{buildroot}%{_libexecdir}/ksamples/bpf/test_lwt_bpf.sh +install -m644 *_kern.o %{buildroot}%{_libexecdir}/ksamples/bpf || true install -m644 tcp_bpf.readme %{buildroot}%{_libexecdir}/ksamples/bpf popd # install pktgen samples @@ -2390,12 +2471,24 @@ find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/drivers/net/ find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \; find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \; popd +# install drivers/net/netdevsim selftests +pushd tools/testing/selftests/drivers/net/netdevsim +find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/drivers/net/netdevsim/{} \; +find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/netdevsim/{} \; +find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/netdevsim/{} \; +popd # install net/forwarding selftests pushd tools/testing/selftests/net/forwarding find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \; find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \; find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \; popd +# install net/mptcp selftests +pushd tools/testing/selftests/net/mptcp +find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/net/mptcp/{} \; +find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/net/mptcp/{} \; +find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/net/mptcp/{} \; +popd # install tc-testing selftests pushd tools/testing/selftests/tc-testing find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \; @@ -2408,18 +2501,12 @@ find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/livepatch/{} find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \; find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \; popd -%endif - -# We have to do the headers checksum calculation after the tools install because -# these might end up installing their own set of headers on top of kernel's -%if %{with_headers} -# compute a content hash to export as Provides: kernel-headers-checksum -HEADERS_CHKSUM=$(export LC_ALL=C; find $RPM_BUILD_ROOT/usr/include -type f -name "*.h" \ - ! -path $RPM_BUILD_ROOT/usr/include/linux/version.h | \ - sort | xargs cat | sha1sum - | cut -f 1 -d ' '); -# export the checksum via usr/include/linux/version.h, so the dynamic -# find-provides can grab the hash to update it accordingly -echo "#define KERNEL_HEADERS_CHECKSUM \"$HEADERS_CHKSUM\"" >> $RPM_BUILD_ROOT/usr/include/linux/version.h +# install netfilter selftests +pushd tools/testing/selftests/netfilter +find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/netfilter/{} \; +find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/netfilter/{} \; +find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/netfilter/{} \; +popd %endif ### @@ -2554,8 +2641,10 @@ fi\ %kernel_variant_post -v lpae -r (kernel|kernel-smp) %endif +%if %{with_debug} %kernel_variant_preun debug %kernel_variant_post -v debug +%endif %if %{with_zfcpdump} %kernel_variant_preun zfcpdump @@ -2588,7 +2677,7 @@ fi %if %{with_kabidw_base} %ifarch x86_64 s390x ppc64 ppc64le aarch64 -%files kabidw-base +%files kernel-kabidw-base-internal %defattr(-,root,root) /kabidw-base/%{_target_cpu}/* %endif @@ -2607,8 +2696,7 @@ fi %files -n perf %{_bindir}/perf %{_libdir}/libperf-jvmti.so -%dir %{_libdir}/traceevent/plugins -%{_libdir}/traceevent/plugins/* +%exclude %{_libdir}/traceevent %dir %{_libexecdir}/perf-core %{_libexecdir}/perf-core/* %{_datadir}/perf-core/* @@ -2661,6 +2749,10 @@ fi %{_bindir}/gpio-watch %{_mandir}/man1/kvm_stat* %{_bindir}/kvm_stat +%{_unitdir}/kvm_stat.service +%config(noreplace) %{_sysconfdir}/logrotate.d/kvm_stat +%{_bindir}/page_owner_sort +%{_bindir}/slabinfo %if %{with_debuginfo} %files -f kernel-tools-debuginfo.list -n kernel-tools-debuginfo @@ -2726,7 +2818,7 @@ fi # # This macro defines the %%files sections for a kernel package # and its devel and debuginfo packages. -# %%kernel_variant_files [-k vmlinux] <condition> <subpackage> <without_modules> +# %%kernel_variant_files [-k vmlinux] <use_vdso> <condition> <subpackage> # %define kernel_variant_files(k:) \ %if %{2}\ @@ -2754,7 +2846,6 @@ fi /lib/modules/%{KVERREL}%{?3:+%{3}}/build\ /lib/modules/%{KVERREL}%{?3:+%{3}}/source\ /lib/modules/%{KVERREL}%{?3:+%{3}}/updates\ -/lib/modules/%{KVERREL}%{?3:+%{3}}/bls.conf\ /lib/modules/%{KVERREL}%{?3:+%{3}}/weak-updates\ %{_datadir}/doc/kernel-keys/%{KVERREL}%{?3:+%{3}}\ %if %{1}\ @@ -2781,8 +2872,15 @@ fi %kernel_variant_files %{_use_vdso} %{with_up} %kernel_variant_files %{_use_vdso} %{with_debug} debug +%if !%{debugbuildsenabled} +%files debug +%files debug-core +%files debug-devel +%files debug-modules +%files debug-modules-extra +%endif %kernel_variant_files %{use_vdso} %{with_pae} lpae -%kernel_variant_files %{_use_vdso} %{with_zfcpdump} zfcpdump 1 +%kernel_variant_files %{_use_vdso} %{with_zfcpdump} zfcpdump %define kernel_variant_ipaclones(k:) \ %if %{1}\ @@ -2802,73 +2900,187 @@ fi # # %changelog -* Sat Jul 17 2021 Jan Drögehoff <sentrycraft123@gmail.com> - 5.12.17-301.fsync -- Linux v5.12.17 futex2 zen openrgb +* Tue Jul 20 2021 Jan Drögehoff <sentrycraft123@gmail.com> - 5.13.3-201.fsync +- Linux v5.13.3 futex2 zen openrgb winesync + +* Mon Jul 19 2021 Justin M. Forbes <jforbes@fedoraproject.org> [5.13.3-200] +- kernel-5.13.3-0 (Justin M. Forbes) +- Don't tag a release as [redhat] (Justin M. Forbes) +- platform/x86: amd-pmc: Fix missing unlock on error in amd_pmc_send_cmd() (Yang Yingliang) + +* Mon Jul 19 2021 Justin M. Forbes <jforbes@fedoraproject.org> [5.13.3-0] +- Don't tag a release as [redhat] (Justin M. Forbes) +- platform/x86: amd-pmc: Fix missing unlock on error in amd_pmc_send_cmd() (Yang Yingliang) + +* Wed Jul 14 2021 Justin M. Forbes <jforbes@fedoraproject.org> [5.13.2-0] +- platform/x86: amd-pmc: Use return code on suspend (Mario Limonciello) +- ACPI: PM: Only mark EC GPE for wakeup on Intel systems (Mario Limonciello) +- platform/x86: amd-pmc: Add new acpi id for future PMC controllers (Shyam Sundar S K) +- platform/x86: amd-pmc: Add support for ACPI ID AMDI0006 (Shyam Sundar S K) +- amd-pmc: Add support for logging s0ix counters (Shyam Sundar S K) +- platform/x86: amd-pmc: Add support for logging SMU metrics (Shyam Sundar S K) +- platform/x86: amd-pmc: call dump registers only once (Shyam Sundar S K) +- platform/x86: amd-pmc: Fix SMU firmware reporting mechanism (Shyam Sundar S K) +- platform/x86: amd-pmc: Fix command completion code (Shyam Sundar S K) +- ACPI: PM: Adjust behavior for field problems on AMD systems (Mario Limonciello) +- ACPI: PM: s2idle: Add support for new Microsoft UUID (Pratik Vishwakarma) +- ACPI: PM: s2idle: Add support for multiple func mask (Pratik Vishwakarma) +- ACPI: PM: s2idle: Refactor common code (Pratik Vishwakarma) +- ACPI: PM: s2idle: Use correct revision id (Pratik Vishwakarma) +- ACPI: PM: s2idle: Add missing LPS0 functions for AMD (Alex Deucher) +- ACPI: Add quirks for AMD Renoir/Lucienne CPUs to force the D3 hint (Mario Limonciello) +- ACPI: Check StorageD3Enable _DSD property in ACPI code (Mario Limonciello) +- nvme-pci: look for StorageD3Enable on companion ACPI device instead (Mario Limonciello) +- ACPI: processor idle: Fix up C-state latency if not ordered (Mario Limonciello) +- Revert "drm/rockchip: remove existing generic drivers to take over the device" (Justin M. Forbes) +- all: unify and cleanup i2c TPM2 modules (Peter Robinson) +- tpm_tis_spi: add missing SPI device ID entries (Javier Martinez Canillas) +- drm/rockchip: remove existing generic drivers to take over the device (Javier Martinez Canillas) +- arm64: dts: rockchip: disable USB type-c DisplayPort (Jian-Hong Pan) -* Wed Jun 30 2021 Justin M. Forbes <jforbes@fedoraproject.org> [5.12.14-0] -- Add CONFIG_SYSTEM_REVOCATION_LIST backported config option for 5.12.14 (Justin M. Forbes) +* Wed Jul 07 2021 Justin M. Forbes <jforbes@fedoraproject.org> [5.13.1-0] +- Don't build bpftool as part of kernel (Justin M. Forbes) +- fedora: arm: Enable some i.MX8 options (Peter Robinson) +- Enable Landlock for Fedora (Justin M. Forbes) - can: bcm: delay release of struct bcm_op after synchronize_rcu (Thadeu Lima de Souza Cascardo) - -* Wed Jun 16 2021 Justin M. Forbes <jforbes@fedoraproject.org> [5.12.11-0] -- Bluetooth: btqca: Don't modify firmware contents in-place (Connor Abbott) - -* Thu Jun 10 2021 Justin M. Forbes <jforbes@fedoraproject.org> [5.12.10-0] -- Bluetooth: use correct lock to prevent UAF of hdev object (Lin Ma) -- nfc: fix NULL ptr dereference in llcp_sock_getname() after failed connect (Krzysztof Kozlowski) - -* Thu Jun 03 2021 Justin M. Forbes <jforbes@fedoraproject.org> [5.12.9-0] -- selinux: Allow context mounts for unpriviliged overlayfs (Vivek Goyal) - -* Wed May 26 2021 Justin M. Forbes <jforbes@fedoraproject.org> [5.12.7-0] -- Fix up merge issue resulting in dual entries for ALC295_FIXUP_ASUS_DACS (Justin M. Forbes) -- powerpc/64s/syscall: Fix ptrace syscall info with scv syscalls (Nicholas Piggin) - -* Sat May 22 2021 Justin M. Forbes <jforbes@fedoraproject.org> [5.12.6-0] -- bus: mhi: core: Download AMSS image from appropriate function (Bhaumik Bhatt) - -* Wed May 19 2021 Justin M. Forbes <jforbes@fedoraproject.org> [5.12.5-0] -- drm/rockchip: remove existing generic drivers to take over the device (Javier Martinez Canillas) +- Fix typos in fedora filters (Justin M. Forbes) +- More filtering for Fedora (Justin M. Forbes) +- Fix Fedora module filtering for spi-altera-dfl (Justin M. Forbes) +- Changes for building stable Fedora (Justin M. Forbes) +- Fedora 5.13 config updates (Justin M. Forbes) +- fedora: cleanup TCG_TIS_I2C_CR50 (Peter Robinson) +- fedora: drop duplicate configs (Peter Robinson) +- More Fedora config updates for 5.13 (Justin M. Forbes) +- redhat/configs: Enable needed drivers for BlueField SoC on aarch64 (Alaa Hleihel) [1858592 1858594 1858596] +- redhat: Rename mod-blacklist.sh to mod-denylist.sh (Prarit Bhargava) +- redhat/configs: enable CONFIG_NET_ACT_MPLS (Marcelo Ricardo Leitner) +- configs: Enable CONFIG_DEBUG_KERNEL for zfcpdump (Jiri Olsa) +- kernel.spec: Add support to use vmlinux.h (Don Zickus) +- spec: Add vmlinux.h to kernel-devel package (Jiri Olsa) +- Turn off DRM_XEN_FRONTEND for Fedora as we had DRM_XEN off already (Justin M. Forbes) +- Fedora 5.13 config updates pt 3 (Justin M. Forbes) +- all: enable ath11k wireless modules (Peter Robinson) +- all: Enable WWAN and associated MHI bus pieces (Peter Robinson) +- spec: Enable sefltests rpm build (Jiri Olsa) +- spec: Allow bpf selftest/samples to fail (Jiri Olsa) +- bpf, selftests: Disable tests that need clang13 (Toke Høiland-Jørgensen) +- kvm: Add kvm_stat.service file and kvm_stat logrotate config to the tools (Jiri Benc) +- kernel.spec: Add missing source files to kernel-selftests-internal (Jiri Benc) +- kernel.spec: selftests: add net/forwarding to TARGETS list (Jiri Benc) +- kernel.spec: selftests: add build requirement on libmnl-devel (Jiri Benc) +- kernel.spec: add action.o to kernel-selftests-internal (Jiri Benc) +- kernel.spec: avoid building bpftool repeatedly (Jiri Benc) +- kernel.spec: selftests require python3 (Jiri Benc) +- kernel.spec: skip selftests that failed to build (Jiri Benc) +- kernel.spec: fix installation of bpf selftests (Jiri Benc) +- redhat: fix samples and selftests make options (Jiri Benc) +- kernel.spec: enable mptcp selftests for kernel-selftests-internal (Jiri Benc) +- kernel.spec: Do not export shared objects from libexecdir to RPM Provides (Jiri Benc) +- kernel.spec: add missing dependency for the which package (Jiri Benc) +- kernel.spec: add netfilter selftests to kernel-selftests-internal (Jiri Benc) +- kernel.spec: move slabinfo and page_owner_sort debuginfo to tools-debuginfo (Jiri Benc) +- kernel.spec: package and ship VM tools (Jiri Benc) +- configs: enable CONFIG_PAGE_OWNER (Jiri Benc) +- kernel.spec: add coreutils (Jiri Benc) +- kernel.spec: add netdevsim driver selftests to kernel-selftests-internal (Jiri Benc) +- redhat/Makefile: Clean out the --without flags from the baseonly rule (Jiri Benc) +- kernel.spec: Stop building unnecessary rpms for baseonly builds (Jiri Benc) +- kernel.spec: disable more kabi switches for gcov build (Jiri Benc) +- kernel.spec: Rename kabi-dw base (Jiri Benc) +- kernel.spec: Fix error messages during build of zfcpdump kernel (Jiri Benc) +- kernel.spec: perf: remove bpf examples (Jiri Benc) +- kernel.spec: selftests should not depend on modules-internal (Jiri Benc) +- kernel.spec: build samples (Jiri Benc) +- kernel.spec: tools: sync missing options with RHEL 8 (Jiri Benc) +- redhat/configs: nftables: Enable extra flowtable symbols (Phil Sutter) +- redhat/configs: Sync netfilter options with RHEL8 (Phil Sutter) +- Fedora 5.13 config updates pt 2 (Justin M. Forbes) +- Move CONFIG_ARCH_INTEL_SOCFPGA up a level for Fedora (Justin M. Forbes) +- fedora: enable the Rockchip rk3399 pcie drivers (Peter Robinson) +- PCI: rockchip: Register IRQs just before pci_host_probe() (Javier Martinez Canillas) +- arm64: dts: rockchip: Update PCI host bridge window to 32-bit address memory (Punit Agrawal) +- Fedora 5.13 config updates pt 1 (Justin M. Forbes) +- Fix version requirement from opencsd-devel buildreq (Justin M. Forbes) +- configs/ark/s390: set CONFIG_MARCH_Z14 and CONFIG_TUNE_Z15 (Philipp Rudo) [1876435] +- configs/common/s390: Clean up CONFIG_{MARCH,TUNE}_Z* (Philipp Rudo) +- configs/process_configs.sh: make use of dummy-tools (Philipp Rudo) +- configs/common: disable CONFIG_INIT_STACK_ALL_{PATTERN,ZERO} (Philipp Rudo) +- configs/common/aarch64: disable CONFIG_RELR (Philipp Rudo) +- redhat/config: enable STMICRO nic for RHEL (Mark Salter) +- redhat/configs: Enable ARCH_TEGRA on RHEL (Mark Salter) +- redhat/configs: enable IMA_KEXEC for supported arches (Bruno Meneguele) +- redhat/configs: enable INTEGRITY_SIGNATURE to all arches (Bruno Meneguele) +- configs: enable CONFIG_LEDS_BRIGHTNESS_HW_CHANGED (Benjamin Tissoires) +- RHEL: disable io_uring support (Jeff Moyer) +- all: Changing CONFIG_UV_SYSFS to build uv_sysfs.ko as a loadable module. (Frank Ramsay) +- Enable NITRO_ENCLAVES on RHEL (Vitaly Kuznetsov) +- Update the Quick Start documentation (David Ward) +- redhat/configs: Set PVPANIC_MMIO for x86 and PVPANIC_PCI for aarch64 (Eric Auger) [1961178] +- Enable CONFIG_BPF_UNPRIV_DEFAULT_OFF (Jiri Olsa) +- configs/common/s390: disable CONFIG_QETH_{OSN,OSX} (Philipp Rudo) [1903201] +- Make CRYPTO_EC also builtin (Simo Sorce) [1947240] +- Do not hard-code a default value for DIST (David Ward) +- Override %%{debugbuildsenabled} if the --with-release option is used (David Ward) +- Improve comments in SPEC file, and move some option tests and macros (David Ward) +- configs: enable CONFIG_EXFAT_FS (Pavel Reichl) [1943423] +- Revert s390x/zfcpdump part of a9d179c40281 and ecbfddd98621 (Vladis Dronov) +- Embed crypto algos, modes and templates needed in the FIPS mode (Vladis Dronov) [1947240] +- configs: Add and enable CONFIG_HYPERV_TESTING for debug kernels (Mohammed Gamal) +- configs: enable CONFIG_CMA on x86_64 in ARK (David Hildenbrand) [1945002] +- rpmspec: build debug-* meta-packages if debug builds are disabled (Herton R. Krzesinski) +- UIO: disable unused config options (Aristeu Rozanski) [1957819] +- ARK-config: Make amd_pinctrl module builtin (Hans de Goede) +- rpmspec: revert/drop content hash for kernel-headers (Herton R. Krzesinski) +- rpmspec: fix check that calls InitBuildVars (Herton R. Krzesinski) - fedora: enable zonefs (Damien Le Moal) - -* Fri May 14 2021 Justin M. Forbes <jforbes@fedoraproject.org> [5.12.4-0] -- can: isotp: prevent race between isotp_bind() and isotp_setsockopt() (Norbert Slusarek) - -* Wed May 12 2021 Justin M. Forbes <jforbes@fedoraproject.org> [5.12.3-0] -- io_uring: truncate lengths larger than MAX_RW_COUNT on provide buffers (Thadeu Lima de Souza Cascardo) -- bpf: Prevent writable memory-mapping of read-only ringbuf pages (Andrii Nakryiko) -- bpf, ringbuf: Deny reserve of buffers larger than ringbuf (Thadeu Lima de Souza Cascardo) -- bpf: Fix alu32 const subreg bound tracking on bitwise operations (Daniel Borkmann) -- net/nfc: fix use-after-free llcp_sock_bind/connect (Or Cohen) +- redhat: load specific ARCH keys to INTEGRITY_PLATFORM_KEYRING (Bruno Meneguele) +- redhat: enable INTEGRITY_TRUSTED_KEYRING across all variants (Bruno Meneguele) +- redhat: enable SYSTEM_BLACKLIST_KEYRING across all variants (Bruno Meneguele) +- redhat: enable INTEGRITY_ASYMMETRIC_KEYS across all variants (Bruno Meneguele) +- Remove unused boot loader specification files (David Ward) +- redhat/configs: Enable mlx5 IPsec and TLS offloads (Alaa Hleihel) [1869674 1957636] - Force DWARF4 because crash does not support DWARF5 yet (Justin M. Forbes) - -* Fri May 07 2021 Justin M. Forbes <jforbes@fedoraproject.org> [5.12.2-0] -- Fedora-5.12: Make amd_pinctrl module builtin (Hans de Goede) -- ALSA: hda/realtek: Fix silent headphone output on ASUS UX430UA (Takashi Iwai) -- Fedora 32 will EOL on 5.11 (Justin M. Forbes) -- PCI: Add MCFG quirks for Tegra194 host controllers (Vidya Sagar) -- Revert "PCI: Add MCFG quirks for Tegra194 host controllers" (Peter Robinson) -- nitro_enclaves: Fix stale file descriptors on failed usercopy (Mathias Krause) -- Revert "add pci_hw_vendor_status()" (Justin M. Forbes) -- fedora: arm: build in Tegra194 PCIe/PHY drivers (Peter Robinson) -- PCI: Add MCFG quirks for Tegra194 host controllers (Peter Robinson) -- fedora: arm: enaable SUN50I_IOMMU on aarch64 (Peter Robinson) -- arm64: dts: rockchip: disable USB type-c DisplayPort (Jian-Hong Pan) - -* Mon May 03 2021 Justin M. Forbes <jforbes@fedoraproject.org> [5.12.1-0] +- common: disable Apple Silicon generally (Peter Robinson) +- cleanup Intel's FPGA configs (Peter Robinson) +- common: move PTP KVM support from ark to common (Peter Robinson) +- Enable CONFIG_DRM_AMDGPU_USERPTR for everyone (Justin M. Forbes) +- redhat: add initial rpminspect configuration (Herton R. Krzesinski) +- fedora: arm updates for 5.13 (Peter Robinson) +- fedora: Enable WWAN and associated MHI bits (Peter Robinson) +- Update CONFIG_MODPROBE_PATH to /usr/sbin (Justin Forbes) +- Fedora set modprobe path (Justin M. Forbes) +- Keep sctp and l2tp modules in modules-extra (Don Zickus) +- Fix ppc64le cross build packaging (Don Zickus) +- Fedora: Make amd_pinctrl module builtin (Hans de Goede) +- Keep CONFIG_KASAN_HW_TAGS off for aarch64 debug configs (Justin M. Forbes) +- New configs in drivers/bus (Fedora Kernel Team) +- RHEL: Don't build KVM PR module on ppc64 (David Gibson) [1930649] +- Flip CONFIG_USB_ROLE_SWITCH from m to y (Justin M. Forbes) +- Set valid options for CONFIG_FW_LOADER_USER_HELPER (Justin M. Forbes) +- Clean up CONFIG_FB_MODE_HELPERS (Justin M. Forbes) +- Turn off CONFIG_VFIO for the s390x zfcpdump kernel (Justin M. Forbes) +- Delete unused CONFIG_SND_SOC_MAX98390 pending-common (Justin M. Forbes) +- Update pending-common configs, preparing to set correctly (Justin M. Forbes) +- Update fedora filters for surface (Justin M. Forbes) +- Build CONFIG_CRYPTO_ECDSA inline for s390x zfcpdump (Justin M. Forbes) +- Replace "flavour" where "variant" is meant instead (David Ward) +- Drop the %%{variant} macro and fix --with-vanilla (David Ward) +- Fix syntax of %%kernel_variant_files (David Ward) +- Change description of --without-vdso-install to fix typo (David Ward) +- Config updates to work around mismatches (Justin M. Forbes) +- CONFIG_SND_SOC_FSL_ASOC_CARD selects CONFIG_MFD_WM8994 now (Justin M. Forbes) +- wireguard: disable in FIPS mode (Hangbin Liu) [1940794] - Enable mtdram for fedora (rhbz 1955916) (Justin M. Forbes) -- hardlink is in /usr/bin/ (rhbz 1889043) (Justin M. Forbes) -- sfc: ef10: fix TX queue lookup in TX event handling (Edward Cree) -- sfc: farch: fix TX queue lookup in TX event handling (Edward Cree) -- sfc: farch: fix TX queue lookup in TX flush done handling (Edward Cree) -- A few more fixes for local builds. None of this works until .1 (Justin M. Forbes) -- Quick hack to reset release to 0 (Justin M. Forbes) -- This is a released kernel branch (Justin M. Forbes) -- Reference the patch as version.patchlevel to more easily see diffs between stable releases (Justin M. Forbes) -- MARKER needs SUBLEVEL for stable, I need to think of a better longterm solution (Justin M. Forbes) -- Added redhat/fedora-dist-git-test.sh for a quick and easy script to test changes (Justin M. Forbes) -- Changes for building stable Fedora (Justin M. Forbes) - -* Mon Apr 26 2021 Herton R. Krzesinski <herton@redhat.com> [5.12.0-1] +- Remove reference to bpf-helpers man page (Justin M. Forbes) +- Fedora: enable more modules for surface devices (Dave Olsthoorn) +- Fix Fedora config mismatch for CONFIG_FSL_ENETC_IERB (Justin M. Forbes) +- hardlink is in /usr/bin/ now (Justin M. Forbes) +- Ensure CONFIG_KVM_BOOK3S_64_PR stays on in Fedora, even if it is turned off in RHEL (Justin M. Forbes) +- Set date in package release from repository commit, not system clock (David Ward) +- Use a better upstream tarball filename for snapshots (David Ward) +- Don't create empty pending-common files on pending-fedora commits (Don Zickus) +- Add redhat/configs/pending-common/generic/s390x/zfcpdump/CONFIG_NETFS_SUPPORT (Justin M. Forbes) +- Create ark-latest branch last for CI scripts (Don Zickus) - Replace /usr/libexec/platform-python with /usr/bin/python3 (David Ward) - Turn off ADI_AXI_ADC and AD9467 which now require CONFIG_OF (Justin M. Forbes) - Export ark infrastructure files (Don Zickus) @@ -2896,7 +3108,6 @@ fi - Limit CONFIG_USB_CDNS_SUPPORT to x86_64 and arm in Fedora (David Ward) - Fedora: Enable CHARGER_GPIO on aarch64 too (Peter Robinson) - Fedora config updates (Justin M. Forbes) -- wireguard: mark as Tech Preview (Hangbin Liu) [1613522] - configs: enable CONFIG_WIREGUARD in ARK (Hangbin Liu) [1613522] - Remove duplicate configs acroos fedora, ark and common (Don Zickus) - Combine duplicate configs across ark and fedora into common (Don Zickus) @@ -2988,7 +3199,6 @@ fi - redhat: replace inline awk script with genlog.py call (Herton R. Krzesinski) - redhat: add genlog.py script (Herton R. Krzesinski) - kernel.spec.template - fix use_vdso usage (Ben Crocker) -- redhat: remove remaining references of CONFIG_RH_DISABLE_DEPRECATED (Herton R. Krzesinski) - Turn off vdso_install for ppc (Justin M. Forbes) - Remove bpf-helpers.7 from bpftool package (Jiri Olsa) - New configs in lib/Kconfig.debug (Fedora Kernel Team) @@ -3165,35 +3375,11 @@ fi - process_configs.sh: Fix syntax flagged by shellcheck (Ben Crocker) - generate_all_configs.sh: Fix syntax flagged by shellcheck (Ben Crocker) - redhat/self-test: Initial commit (Ben Crocker) -- Fixes "acpi: prefer booting with ACPI over DTS" to be RHEL only (Peter Robinson) -- arch/x86: Remove vendor specific CPU ID checks (Prarit Bhargava) -- redhat: Replace hardware.redhat.com link in Unsupported message (Prarit Bhargava) [1810301] -- x86: Fix compile issues with rh_check_supported() (Don Zickus) - KEYS: Make use of platform keyring for module signature verify (Robert Holmes) - Drop that for now (Laura Abbott) - Input: rmi4 - remove the need for artificial IRQ in case of HID (Benjamin Tissoires) - ARM: tegra: usb no reset (Peter Robinson) - arm: make CONFIG_HIGHPTE optional without CONFIG_EXPERT (Jon Masters) -- redhat: rh_kabi: deduplication friendly structs (Jiri Benc) -- redhat: rh_kabi add a comment with warning about RH_KABI_EXCLUDE usage (Jiri Benc) -- redhat: rh_kabi: introduce RH_KABI_EXTEND_WITH_SIZE (Jiri Benc) -- redhat: rh_kabi: Indirect EXTEND macros so nesting of other macros will resolve. (Don Dutile) -- redhat: rh_kabi: Fix RH_KABI_SET_SIZE to use dereference operator (Tony Camuso) -- redhat: rh_kabi: Add macros to size and extend structs (Prarit Bhargava) -- Removing Obsolete hba pci-ids from rhel8 (Dick Kennedy) -- mptsas: pci-id table changes (Laura Abbott) -- mptsas: Taint kernel if mptsas is loaded (Laura Abbott) -- mptspi: pci-id table changes (Laura Abbott) -- qla2xxx: Remove PCI IDs of deprecated adapter (Jeremy Cline) -- be2iscsi: remove unsupported device IDs (Chris Leech) -- mptspi: Taint kernel if mptspi is loaded (Laura Abbott) -- hpsa: remove old cciss-based smartarray pci ids (Joseph Szczypek) -- qla4xxx: Remove deprecated PCI IDs from RHEL 8 (Chad Dupuis) -- aacraid: Remove depreciated device and vendor PCI id's (Raghava Aditya Renukunta) -- megaraid_sas: remove deprecated pci-ids (Tomas Henzl) -- mpt*: remove certain deprecated pci-ids (Jeremy Cline) -- kernel: add SUPPORT_REMOVED kernel taint (Tomas Henzl) -- Rename RH_DISABLE_DEPRECATED to RHEL_DIFFERENCES (Don Zickus) - Add option of 13 for FORCE_MAX_ZONEORDER (Peter Robinson) - s390: Lock down the kernel when the IPL secure flag is set (Jeremy Cline) - efi: Lock down the kernel if booted in secure boot mode (David Howells) @@ -3201,33 +3387,19 @@ fi - security: lockdown: expose a hook to lock the kernel down (Jeremy Cline) - Make get_cert_list() use efi_status_to_str() to print error messages. (Peter Jones) - Add efi_status_to_str() and rework efi_status_to_err(). (Peter Jones) -- Add support for deprecating processors (Laura Abbott) [1565717 1595918 1609604 1610493] - arm: aarch64: Drop the EXPERT setting from ARM64_FORCE_52BIT (Jeremy Cline) - iommu/arm-smmu: workaround DMA mode issues (Laura Abbott) -- rh_kabi: introduce RH_KABI_EXCLUDE (Jakub Racek) - ipmi: do not configure ipmi for HPE m400 (Laura Abbott) [1670017] -- IB/rxe: Mark Soft-RoCE Transport driver as tech-preview (Don Dutile) [1605216] - scsi: smartpqi: add inspur advantech ids (Don Brace) -- ice: mark driver as tech-preview (Jonathan Toppins) -- kABI: Add generic kABI macros to use for kABI workarounds (Myron Stowe) [1546831] -- add pci_hw_vendor_status() (Maurizio Lombardi) - ahci: thunderx2: Fix for errata that affects stop engine (Robert Richter) - Vulcan: AHCI PCI bar fix for Broadcom Vulcan early silicon (Robert Richter) -- bpf: Add tech preview taint for syscall (Eugene Syromiatnikov) [1559877] -- bpf: set unprivileged_bpf_disabled to 1 by default, add a boot parameter (Eugene Syromiatnikov) [1561171] -- add Red Hat-specific taint flags (Eugene Syromiatnikov) [1559877] - kdump: fix a grammar issue in a kernel message (Dave Young) [1507353] -- tags.sh: Ignore redhat/rpm (Jeremy Cline) -- put RHEL info into generated headers (Laura Abbott) [1663728] - kdump: add support for crashkernel=auto (Jeremy Cline) - kdump: round up the total memory size to 128M for crashkernel reservation (Dave Young) [1507353] - acpi: prefer booting with ACPI over DTS (Mark Salter) [1576869] - aarch64: acpi scan: Fix regression related to X-Gene UARTs (Mark Salter) [1519554] - ACPI / irq: Workaround firmware issue on X-Gene based m400 (Mark Salter) [1519554] -- modules: add rhelversion MODULE_INFO tag (Laura Abbott) - ACPI: APEI: arm64: Ignore broken HPE moonshot APEI support (Al Stone) [1518076] -- Add Red Hat tainting (Laura Abbott) [1565704] -- Introduce CONFIG_RH_DISABLE_DEPRECATED (Laura Abbott) - Stop merging ark-patches for release (Don Zickus) - Fix path location for ark-update-configs.sh (Don Zickus) - Combine Red Hat patches into single patch (Don Zickus) @@ -3384,7 +3556,6 @@ fi - Add RHMAINTAINERS file and supporting conf (Don Zickus) - Add a script to test if all commits are signed off (Jeremy Cline) - Fix make rh-configs-arch (Don Zickus) -- Drop RH_FEDORA in favor of the now-merged RHEL_DIFFERENCES (Jeremy Cline) - Sync up Fedora configs from the first week of the merge window (Jeremy Cline) - Migrate blacklisting floppy.ko to mod-blacklist.sh (Don Zickus) - kernel packaging: Combine mod-blacklist.sh and mod-extra-blacklist.sh (Don Zickus) @@ -3528,7 +3699,6 @@ fi - Add an initial CI configuration for the internal branch (Jeremy Cline) - New drop of configuration options for v5.4-rc1 (Jeremy Cline) - New drop of configuration options for v5.4-rc1 (Jeremy Cline) -- Pull the RHEL version defines out of the Makefile (Jeremy Cline) - Sync up the ARK build scripts (Jeremy Cline) - Sync up the Fedora Rawhide configs (Jeremy Cline) - Sync up the ARK config files (Jeremy Cline) @@ -3536,6 +3706,96 @@ fi - configs: Add README for some other arches (Laura Abbott) - configs: Sync up Fedora configs (Laura Abbott) - [initial commit] Add structure for building with git (Laura Abbott) +- [initial commit] Red Hat gitignore and attributes (Laura Abbott) +- [initial commit] Add changelog (Laura Abbott) +- [initial commit] Add makefile (Laura Abbott) +- [initial commit] Add files for generating the kernel.spec (Laura Abbott) +- [initial commit] Add rpm directory (Laura Abbott) +- [initial commit] Add files for packaging (Laura Abbott) +- [initial commit] Add kabi files (Laura Abbott) +- [initial commit] Add scripts (Laura Abbott) +- [initial commit] Add configs (Laura Abbott) +- [initial commit] Add Makefiles (Laura Abbott) + +* Wed Oct 09 2019 Jeremy Cline <jcline@redhat.com> [5.4.0-0.rc2.1.elrdy] +- Skip ksamples for bpf, they are broken (Jeremy Cline) +- Add a SysRq option to lift kernel lockdown (Kyle McMartin) +- efi: Lock down the kernel if booted in secure boot mode (David Howells) +- efi: Add an EFI_SECURE_BOOT flag to indicate secure boot mode (David Howells) +- security: lockdown: expose a hook to lock the kernel down (Jeremy Cline) +- Make get_cert_list() use efi_status_to_str() to print error messages. (Peter Jones) +- Add efi_status_to_str() and rework efi_status_to_err(). (Peter Jones) +- Make get_cert_list() not complain about cert lists that aren't present. (Peter Jones) +- [iommu] iommu/arm-smmu: workaround DMA mode issues (Laura Abbott) +- [kernel] rh_taint: correct loaddable module support dependencies (Philipp Rudo) [1652266] +- [kernel] rh_kabi: introduce RH_KABI_EXCLUDE (Jakub Racek) [1652256] +- [x86] mark intel knights landing and knights mill unsupported (David Arcari) [1610493] +- [x86] mark whiskey-lake processor supported (David Arcari) [1609604] +- [char] ipmi: do not configure ipmi for HPE m400 (Laura Abbott) [https://bugzilla.redhat.com/show_bug.cgi?id=1670017] +- [infiniband] IB/rxe: Mark Soft-RoCE Transport driver as tech-preview (Don Dutile) [1605216] +- [scsi] scsi: smartpqi: add inspur advantech ids (Don Brace) [1503736] +- [netdrv] ice: mark driver as tech-preview (Jonathan Toppins) [1495347] +- [scsi] be2iscsi: remove BE3 family support (Maurizio Lombardi) [1598366] +- [x86] update rh_check_supported processor list (David Arcari) [1595918] +- [kernel] kABI: Add generic kABI macros to use for kABI workarounds (Myron Stowe) [1546831] +- [pci] add pci_hw_vendor_status() (Maurizio Lombardi) [1590829] +- [ata] ahci: thunderx2: Fix for errata that affects stop engine (Robert Richter) [1563590] +- [pci] Vulcan: AHCI PCI bar fix for Broadcom Vulcan early silicon (Robert Richter) [1563590] +- [kernel] bpf: Add tech preview taint for syscall (Eugene Syromiatnikov) [1559877] +- [kernel] bpf: set unprivileged_bpf_disabled to 1 by default, add a boot parameter (Eugene Syromiatnikov) [1561171] +- [kernel] add Red Hat-specific taint flags (Eugene Syromiatnikov) [1559877] +- [kernel] kdump: fix a grammar issue in a kernel message (Dave Young) [1507353] +- [scripts] tags.sh: Ignore redhat/rpm (Jeremy Cline) +- [kernel] put RHEL info into generated headers (Laura Abbott) [https://bugzilla.redhat.com/show_bug.cgi?id=1663728] +- [kernel] kdump: add support for crashkernel=auto (Jeremy Cline) +- [kernel] kdump: round up the total memory size to 128M for crashkernel reservation (Dave Young) [1507353] +- [arm64] acpi: prefer booting with ACPI over DTS (Mark Salter) [1576869] +- [acpi] aarch64: acpi scan: Fix regression related to X-Gene UARTs (Mark Salter) [1519554] +- [acpi] ACPI / irq: Workaround firmware issue on X-Gene based m400 (Mark Salter) [1519554] +- [x86] add rh_check_supported (David Arcari) [1565717] +- [scsi] qla2xxx: Remove PCI IDs of deprecated adapter (Jeremy Cline) +- [scsi] be2iscsi: remove unsupported device IDs (Chris Leech) [1574502] +- [scsi] Removing Obsolete hba pci-ids from rhel8 (Dick Kennedy) [1572321] +- [scsi] hpsa: modify hpsa driver version (Jeremy Cline) +- [scsi] hpsa: remove old cciss-based smartarray pci ids (Joseph Szczypek) [1471185] +- [kernel] rh_taint: add support for marking driver as unsupported (Jonathan Toppins) [1565704] +- [kernel] rh_taint: add support (David Arcari) [1565704] +- [scsi] qla4xxx: Remove deprecated PCI IDs from RHEL 8 (Chad Dupuis) [1518874] +- [scsi] aacraid: Remove depreciated device and vendor PCI id's (Raghava Aditya Renukunta) [1495307] +- [scsi] megaraid_sas: remove deprecated pci-ids (Tomas Henzl) [1509329] +- [scsi] mpt*: remove certain deprecated pci-ids (Jeremy Cline) +- [kernel] modules: add rhelversion MODULE_INFO tag (Laura Abbott) +- [acpi] ACPI: APEI: arm64: Ignore broken HPE moonshot APEI support (Al Stone) [1518076] +- gitlab: Add CI job for packaging scripts (Major Hayden) +- Set CRYPTO_SHA3_*_S390 to builtin on zfcpdump (Jeremy Cline) +- configs: New config in drivers/edac for v5.4-rc1 (Jeremy Cline) +- configs: New config in drivers/firmware for v5.4-rc1 (Jeremy Cline) +- configs: New config in drivers/hwmon for v5.4-rc1 (Jeremy Cline) +- configs: New config in drivers/iio for v5.4-rc1 (Jeremy Cline) +- configs: New config in drivers/mmc for v5.4-rc1 (Jeremy Cline) +- configs: New config in drivers/tty for v5.4-rc1 (Jeremy Cline) +- configs: New config in arch/s390 for v5.4-rc1 (Jeremy Cline) +- configs: New config in drivers/bus for v5.4-rc1 (Jeremy Cline) +- Add option to allow mismatched configs on the command line (Laura Abbott) +- configs: New config in drivers/crypto for v5.4-rc1 (Jeremy Cline) +- configs: New config in sound/pci for v5.4-rc1 (Jeremy Cline) +- configs: New config in sound/soc for v5.4-rc1 (Jeremy Cline) +- Speed up CI with CKI image (Major Hayden) +- configs: Fix the pending default for CONFIG_ARM64_VA_BITS_52 (Jeremy Cline) +- configs: Turn on OPTIMIZE_INLINING for everything (Jeremy Cline) +- configs: Set valid pending defaults for CRYPTO_ESSIV (Jeremy Cline) +- Add an initial CI configuration for the internal branch (Jeremy Cline) +- New drop of configuration options for v5.4-rc1 (Jeremy Cline) +- Disable e1000 driver in ARK (Neil Horman) +- New drop of configuration options for v5.4-rc1 (Jeremy Cline) +- configs: Adjust CONFIG_FORCE_MAX_ZONEORDER for Fedora (Laura Abbott) +- configs: Add README for some other arches (Laura Abbott) +- configs: Sync up Fedora configs (Laura Abbott) +- Pull the RHEL version defines out of the Makefile (Jeremy Cline) +- Sync up the ARK build scripts (Jeremy Cline) +- Sync up the Fedora Rawhide configs (Jeremy Cline) +- Sync up the ARK config files (Jeremy Cline) +- [initial commit] Add structure for building with git (Laura Abbott) - [initial commit] Add Red Hat variables in the top level makefile (Laura Abbott) - [initial commit] Red Hat gitignore and attributes (Laura Abbott) - [initial commit] Add changelog (Laura Abbott) |