1 files changed, 0 insertions, 81 deletions
diff --git a/SOURCES/0001-arm64-allwinner-dts-a64-add-LCD-related-device-nodes.patch b/SOURCES/0001-arm64-allwinner-dts-a64-add-LCD-related-device-nodes.patch
deleted file mode 100644
index e3b07c2..0000000
--- a/SOURCES/0001-arm64-allwinner-dts-a64-add-LCD-related-device-nodes.patch
+++ /dev/null
@@ -1,81 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Icenowy Zheng <icenowy@aosc.io>
-Date: Mon, 16 Mar 2020 21:35:03 +0800
-Subject: [PATCH] arm64: allwinner: dts: a64: add LCD-related device nodes for
- PinePhone
-
-PinePhone uses PWM backlight and a XBD599 LCD panel over DSI for
-display.
-
-Add its device nodes.
-
-Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
----
- .../dts/allwinner/sun50i-a64-pinephone.dtsi   | 37 +++++++++++++++++++
- 1 file changed, 37 insertions(+)
-
-diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
-index cefda145c3c9..96d9150423e0 100644
---- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
-@@ -16,6 +16,15 @@ aliases {
- 		serial0 = &uart0;
- 	};
-
-+	backlight: backlight {
-+		compatible = "pwm-backlight";
-+		pwms = <&r_pwm 0 50000 PWM_POLARITY_INVERTED>;
-+		brightness-levels = <0 16 18 20 22 24 26 29 32 35 38 42 46 51 56 62 68 75 83 91 100>;
-+		default-brightness-level = <15>;
-+		enable-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
-+		power-supply = <&reg_ldo_io0>;
-+	};
-+
- 	chosen {
- 		stdout-path = "serial0:115200n8";
- 	};
-@@ -84,6 +93,30 @@ &dai {
- 	status = "okay";
- };
-
-+&de {
-+	status = "okay";
-+};
-+
-+&dphy {
-+	status = "okay";
-+};
-+
-+&dsi {
-+	vcc-dsi-supply = <&reg_dldo1>;
-+	#address-cells = <1>;
-+	#size-cells = <0>;
-+	status = "okay";
-+
-+	panel@0 {
-+		compatible = "xingbangda,xbd599";
-+		reg = <0>;
-+		reset-gpios = <&pio 3 23 GPIO_ACTIVE_LOW>; /* PD23 */
-+		iovcc-supply = <&reg_dldo2>;
-+		vcc-supply = <&reg_ldo_io0>;
-+		backlight = <&backlight>;
-+	};
-+};
-+
- &ehci0 {
- 	status = "okay";
- };
-@@ -188,6 +221,10 @@ &r_pio {
- 	 */
- };
-
-+&r_pwm {
-+	status = "okay";
-+};
-+
- &r_rsb {
- 	status = "okay";
-
--- 
-2.26.2
-