summaryrefslogtreecommitdiff
path: root/SOURCES/0012-arm64-dts-sun50i-a64-pinephone-Enable-LCD-support-on.patch
diff options
context:
space:
mode:
Diffstat (limited to 'SOURCES/0012-arm64-dts-sun50i-a64-pinephone-Enable-LCD-support-on.patch')
-rw-r--r--SOURCES/0012-arm64-dts-sun50i-a64-pinephone-Enable-LCD-support-on.patch112
1 files changed, 112 insertions, 0 deletions
diff --git a/SOURCES/0012-arm64-dts-sun50i-a64-pinephone-Enable-LCD-support-on.patch b/SOURCES/0012-arm64-dts-sun50i-a64-pinephone-Enable-LCD-support-on.patch
new file mode 100644
index 0000000..0c8ca99
--- /dev/null
+++ b/SOURCES/0012-arm64-dts-sun50i-a64-pinephone-Enable-LCD-support-on.patch
@@ -0,0 +1,112 @@
+From 3ac5eb0c8bc2da9e81e04fc6106a79b476ec9219 Mon Sep 17 00:00:00 2001
+From: Icenowy Zheng <icenowy@aosc.io>
+Date: Fri, 26 Jun 2020 02:56:00 +0200
+Subject: [PATCH 12/13] arm64: dts: sun50i-a64-pinephone: Enable LCD support on
+ PinePhone
+
+PinePhone uses PWM backlight and a XBD599 LCD panel over DSI for
+display.
+
+Backlight levels curve was optimized by Martijn Braam using a
+lux meter.
+
+Add its device nodes.
+
+Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
+Signed-off-by: Martijn Braam <martijn@brixit.nl>
+Signed-off-by: Ondrej Jirman <megous@megous.com>
+---
+ .../allwinner/sun50i-a64-pinephone-1.1.dts | 19 ++++++++++
+ .../dts/allwinner/sun50i-a64-pinephone.dtsi | 35 +++++++++++++++++++
+ 2 files changed, 54 insertions(+)
+
+diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts
+index 06a775c41664b..3e99a87e9ce52 100644
+--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts
++++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts
+@@ -9,3 +9,22 @@ / {
+ model = "Pine64 PinePhone Braveheart (1.1)";
+ compatible = "pine64,pinephone-1.1", "allwinner,sun50i-a64";
+ };
++
++&backlight {
++ power-supply = <&reg_ldo_io0>;
++ /*
++ * PWM backlight circuit on this PinePhone revision was changed since
++ * 1.0, and the lowest PWM duty cycle that doesn't lead to backlight
++ * being off is around 20%. Duty cycle for the lowest brightness level
++ * also varries quite a bit between individual boards, so the lowest
++ * value here was chosen as a safe default.
++ */
++ brightness-levels = <
++ 774 793 814 842
++ 882 935 1003 1088
++ 1192 1316 1462 1633
++ 1830 2054 2309 2596
++ 2916 3271 3664 4096>;
++ num-interpolated-steps = <50>;
++ default-brightness-level = <400>;
++};
+diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
+index cefda145c3c9d..85a7aa5efd326 100644
+--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
++++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
+@@ -16,6 +16,13 @@ aliases {
+ serial0 = &uart0;
+ };
+
++ backlight: backlight {
++ compatible = "pwm-backlight";
++ pwms = <&r_pwm 0 50000 PWM_POLARITY_INVERTED>;
++ enable-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
++ /* Backlight configuration differs per PinePhone revision. */
++ };
++
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+@@ -84,6 +91,30 @@ &dai {
+ status = "okay";
+ };
+
++&de {
++ status = "okay";
++};
++
++&dphy {
++ status = "okay";
++};
++
++&dsi {
++ vcc-dsi-supply = <&reg_dldo1>;
++ #address-cells = <1>;
++ #size-cells = <0>;
++ status = "okay";
++
++ panel@0 {
++ compatible = "xingbangda,xbd599";
++ reg = <0>;
++ reset-gpios = <&pio 3 23 GPIO_ACTIVE_LOW>; /* PD23 */
++ iovcc-supply = <&reg_dldo2>;
++ vcc-supply = <&reg_ldo_io0>;
++ backlight = <&backlight>;
++ };
++};
++
+ &ehci0 {
+ status = "okay";
+ };
+@@ -188,6 +219,10 @@ &r_pio {
+ */
+ };
+
++&r_pwm {
++ status = "okay";
++};
++
+ &r_rsb {
+ status = "okay";
+
+--
+2.26.2
+