summaryrefslogtreecommitdiff
path: root/SOURCES/0001-ahci-thunderx2-Fix-for-errata-that-affects-stop-engi.patch
diff options
context:
space:
mode:
Diffstat (limited to 'SOURCES/0001-ahci-thunderx2-Fix-for-errata-that-affects-stop-engi.patch')
-rw-r--r--SOURCES/0001-ahci-thunderx2-Fix-for-errata-that-affects-stop-engi.patch89
1 files changed, 89 insertions, 0 deletions
diff --git a/SOURCES/0001-ahci-thunderx2-Fix-for-errata-that-affects-stop-engi.patch b/SOURCES/0001-ahci-thunderx2-Fix-for-errata-that-affects-stop-engi.patch
new file mode 100644
index 0000000..0299e96
--- /dev/null
+++ b/SOURCES/0001-ahci-thunderx2-Fix-for-errata-that-affects-stop-engi.patch
@@ -0,0 +1,89 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Robert Richter <rrichter@redhat.com>
+Date: Thu, 7 Jun 2018 22:59:33 -0400
+Subject: [PATCH] ahci: thunderx2: Fix for errata that affects stop engine
+
+Message-id: <1528412373-19128-3-git-send-email-rrichter@redhat.com>
+Patchwork-id: 220952
+O-Subject: [RHEL-8.0 BZ 1563590 v2 2/2] ahci: thunderx2: Fix for errata that affects stop engine
+Bugzilla: 1563590
+RH-Acked-by: Dean Nelson <dnelson@redhat.com>
+RH-Acked-by: Mark Langsdorf <mlangsdo@redhat.com>
+RH-Acked-by: Mark Salter <msalter@redhat.com>
+
+From: Jayachandran C <jnair@caviumnetworks.com>
+
+Apply workaround for this errata:
+ Synopsis: Resetting PxCMD.ST may hang the SATA device
+
+ Description: An internal ping-pong buffer state is not reset
+ correctly for an PxCMD.ST=0 command for a SATA channel. This
+ may cause the SATA interface to hang when a PxCMD.ST=0 command
+ is received.
+
+ Workaround: A SATA_BIU_CORE_ENABLE.sw_init_bsi must be asserted
+ by the driver whenever the PxCMD.ST needs to be de-asserted. This
+ will reset both the ports. So, it may not always work in a 2
+ channel SATA system.
+
+ Resolution: Fix in B0.
+
+Add the code to ahci_stop_engine() to do this. It is not easy to
+stop the other "port" since it is associated with a different AHCI
+interface. Please note that with this fix, SATA reset does not
+hang any more, but it can cause failures on the other interface
+if that is in active use.
+
+Unfortunately, we have nothing other the the CPU ID to check if the
+SATA block has this issue.
+
+RHEL-only:
+
+Both patches are in RHEL-7.6 also. Inclusion of the patches into RHEL-8
+was discussed. Since there are partners with Ax system configurations it
+was decided to carry them in RHEL8 too. See:
+
+ https://bugzilla.redhat.com/show_bug.cgi?id=1563590#c1
+
+[v3 with new delays]
+Signed-off-by: Jayachandran C <jnair@caviumnetworks.com>
+
+Upstream Status: RHEL only
+Signed-off-by: Robert Richter <rrichter@redhat.com>
+Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
+---
+ drivers/ata/libahci.c | 18 ++++++++++++++++++
+ 1 file changed, 18 insertions(+)
+
+diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
+index ea5bf5f4cbed..71c55cae27ac 100644
+--- a/drivers/ata/libahci.c
++++ b/drivers/ata/libahci.c
+@@ -666,6 +666,24 @@ int ahci_stop_engine(struct ata_port *ap)
+ tmp &= ~PORT_CMD_START;
+ writel(tmp, port_mmio + PORT_CMD);
+
++#ifdef CONFIG_ARM64
++ /* Rev Ax of Cavium CN99XX needs a hack for port stop */
++ if (dev_is_pci(ap->host->dev) &&
++ to_pci_dev(ap->host->dev)->vendor == 0x14e4 &&
++ to_pci_dev(ap->host->dev)->device == 0x9027 &&
++ midr_is_cpu_model_range(read_cpuid_id(),
++ MIDR_CPU_MODEL(ARM_CPU_IMP_BRCM, BRCM_CPU_PART_VULCAN),
++ MIDR_CPU_VAR_REV(0, 0),
++ MIDR_CPU_VAR_REV(0, MIDR_REVISION_MASK))) {
++ tmp = readl(hpriv->mmio + 0x8000);
++ udelay(100);
++ writel(tmp | (1 << 26), hpriv->mmio + 0x8000);
++ udelay(100);
++ writel(tmp & ~(1 << 26), hpriv->mmio + 0x8000);
++ dev_warn(ap->host->dev, "CN99XX SATA reset workaround applied\n");
++ }
++#endif
++
+ /* wait for engine to stop. This could be as long as 500 msec */
+ tmp = ata_wait_register(ap, port_mmio + PORT_CMD,
+ PORT_CMD_LIST_ON, PORT_CMD_LIST_ON, 1, 500);
+--
+2.26.2
+