diff options
70 files changed, 8780 insertions, 999 deletions
diff --git a/BUILD.md b/BUILD.md new file mode 100644 index 00000000..048a724e --- /dev/null +++ b/BUILD.md @@ -0,0 +1,37 @@ +# Build Instructions +The following steps will allow you to compile your own NorthstarLauncher executable from the code in this repository. If you still have questions, you may ask in the [Discord Server](https://discord.gg/r2northstar) + +*This guide assumes you have already installed Northstar as shown in [this page](https://github.com/R2Northstar/Northstar/wiki/Basic-Setup)* + +### Steps +1. **Download the code** from the [R2Northstar/NorthstarLauncher](https://github.com/R2Northstar/NorthstarLauncher) repo +2. **Unzip the file.** +3. **Place the file somewhere memorable,** such as in your Documents directory +4. **Install Visual Studio 2022** from [this link](https://visualstudio.microsoft.com/downloads/). Northstar uses the vc2022 compiler, which is provided with Visual Studio. *You only need to download the Community edition.* +5. If you are prompted to download Workloads, check "Desktop Development with C++" If you are not prompted, don't worry, you'll be able to install this later on as well. + + + +6. **Open the NorthstarLauncher folder** you unzipped with Visual Studio. A tab should open on the right hand side titled "Solution Explorer." + + + +This is a good time to edit the code. From the Solution Explorer, you can find any file you want to modify and do so. Don't forget to save your changes. + +7. **Double click on R2Northstar.sln** in the Solution Explorer. If you have not installed the Desktop Development Workload, you might be prompted now. If everything is correct, the Solution Explorer should change to two files: Northstar and NorthstarLauncher +8. In the top ribbon, press on **Build,** then **Build Solution.** + + + +9. Wait for your build to finish. You can check on its status from the Output tab at the bottom +10. Once your build is finished, **Open the directory in File Explorer.** Then, go to x86 > Debug. You should see NorthstarLauncher.exe and Northstar.dll, as well as a couple other files. +11. **_In your Titanfall2 directory_**, move the preexisting NorthstarLauncher.exe and Northstar.dll into a new folder. You'll want to keep the default launcher backed up before testing any changes. +12. Back in the build debug directory, **Move NorthstarLauncher.exe and Northstar.dll to your Titanfall2 folder.** + +If everything is correct, you should now be able to launch the Northstar client with your changes applied. + +### VS Build Tools + +Developers who can work a command line may be interested in using [Visual Studio Build Tools](https://visualstudio.microsoft.com/downloads/#build-tools-for-visual-studio-2022) to compile the project, as an alternative to installing the full Visual Studio IDE. + +Follow the same steps as above for Visual Studio Build Tools, but instead of opening in Visual Studio, run the Command Prompt for VS 2022 and navigate to the NorthstarLauncher, then run ```msbuild```, which will build the project for you. diff --git a/LauncherInjector/LauncherInjector.vcxproj b/LauncherInjector/LauncherInjector.vcxproj index e205207d..8870c732 100644 --- a/LauncherInjector/LauncherInjector.vcxproj +++ b/LauncherInjector/LauncherInjector.vcxproj @@ -1,14 +1,6 @@ <?xml version="1.0" encoding="utf-8"?> <Project DefaultTargets="Build" xmlns="http://schemas.microsoft.com/developer/msbuild/2003"> <ItemGroup Label="ProjectConfigurations"> - <ProjectConfiguration Include="Debug|Win32"> - <Configuration>Debug</Configuration> - <Platform>Win32</Platform> - </ProjectConfiguration> - <ProjectConfiguration Include="Release|Win32"> - <Configuration>Release</Configuration> - <Platform>Win32</Platform> - </ProjectConfiguration> <ProjectConfiguration Include="Debug|x64"> <Configuration>Debug</Configuration> <Platform>x64</Platform> @@ -27,19 +19,6 @@ <ProjectName>NorthstarLauncher</ProjectName> </PropertyGroup> <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" /> - <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="Configuration"> - <ConfigurationType>Application</ConfigurationType> - <UseDebugLibraries>true</UseDebugLibraries> - <PlatformToolset>v143</PlatformToolset> - <CharacterSet>Unicode</CharacterSet> - </PropertyGroup> - <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration"> - <ConfigurationType>Application</ConfigurationType> - <UseDebugLibraries>false</UseDebugLibraries> - <PlatformToolset>v143</PlatformToolset> - <WholeProgramOptimization>true</WholeProgramOptimization> - <CharacterSet>Unicode</CharacterSet> - </PropertyGroup> <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="Configuration"> <ConfigurationType>Application</ConfigurationType> <UseDebugLibraries>true</UseDebugLibraries> @@ -58,12 +37,6 @@ </ImportGroup> <ImportGroup Label="Shared"> </ImportGroup> - <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'"> - <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" /> - </ImportGroup> - <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Release|Win32'"> - <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" /> - </ImportGroup> <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Debug|x64'"> <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" /> </ImportGroup> @@ -71,50 +44,12 @@ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" /> </ImportGroup> <PropertyGroup Label="UserMacros" /> - <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'"> - <LinkIncremental>true</LinkIncremental> - </PropertyGroup> - <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'"> - <LinkIncremental>false</LinkIncremental> - </PropertyGroup> <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'"> <LinkIncremental>true</LinkIncremental> </PropertyGroup> <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'"> <LinkIncremental>false</LinkIncremental> </PropertyGroup> - <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'"> - <ClCompile> - <WarningLevel>Level3</WarningLevel> - <SDLCheck>true</SDLCheck> - <PreprocessorDefinitions>WIN32;_DEBUG;_CONSOLE;%(PreprocessorDefinitions)</PreprocessorDefinitions> - <ConformanceMode>true</ConformanceMode> - <LanguageStandard>stdcpp17</LanguageStandard> - </ClCompile> - <Link> - <SubSystem>Console</SubSystem> - <GenerateDebugInformation>true</GenerateDebugInformation> - <AdditionalDependencies>%(AdditionalDependencies)</AdditionalDependencies> - </Link> - </ItemDefinitionGroup> - <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'"> - <ClCompile> - <WarningLevel>Level3</WarningLevel> - <FunctionLevelLinking>true</FunctionLevelLinking> - <IntrinsicFunctions>true</IntrinsicFunctions> - <SDLCheck>true</SDLCheck> - <PreprocessorDefinitions>WIN32;NDEBUG;_CONSOLE;%(PreprocessorDefinitions)</PreprocessorDefinitions> - <ConformanceMode>true</ConformanceMode> - <LanguageStandard>stdcpp17</LanguageStandard> - </ClCompile> - <Link> - <SubSystem>Console</SubSystem> - <EnableCOMDATFolding>true</EnableCOMDATFolding> - <OptimizeReferences>true</OptimizeReferences> - <GenerateDebugInformation>true</GenerateDebugInformation> - <AdditionalDependencies>%(AdditionalDependencies)</AdditionalDependencies> - </Link> - </ItemDefinitionGroup> <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'"> <ClCompile> <WarningLevel>Level3</WarningLevel> @@ -122,10 +57,13 @@ <PreprocessorDefinitions>_DEBUG;_CONSOLE;%(PreprocessorDefinitions)</PreprocessorDefinitions> <ConformanceMode>true</ConformanceMode> <LanguageStandard>stdcpp17</LanguageStandard> + <AdditionalOptions>/F8000000 %(AdditionalOptions)</AdditionalOptions> </ClCompile> <Link> <SubSystem>Console</SubSystem> <GenerateDebugInformation>true</GenerateDebugInformation> + <AdditionalDependencies>shlwapi.lib;kernel32.lib;user32.lib;gdi32.lib;winspool.lib;comdlg32.lib;advapi32.lib;shell32.lib;ole32.lib;oleaut32.lib;uuid.lib;odbc32.lib;odbccp32.lib;%(AdditionalDependencies)</AdditionalDependencies> + <StackReserveSize>8000000</StackReserveSize> </Link> </ItemDefinitionGroup> <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'"> @@ -137,12 +75,15 @@ <PreprocessorDefinitions>NDEBUG;_CONSOLE;%(PreprocessorDefinitions)</PreprocessorDefinitions> <ConformanceMode>true</ConformanceMode> <LanguageStandard>stdcpp17</LanguageStandard> + <AdditionalOptions>/F8000000 %(AdditionalOptions)</AdditionalOptions> </ClCompile> <Link> <SubSystem>Console</SubSystem> <EnableCOMDATFolding>true</EnableCOMDATFolding> <OptimizeReferences>true</OptimizeReferences> <GenerateDebugInformation>true</GenerateDebugInformation> + <AdditionalDependencies>shlwapi.lib;kernel32.lib;user32.lib;gdi32.lib;winspool.lib;comdlg32.lib;advapi32.lib;shell32.lib;ole32.lib;oleaut32.lib;uuid.lib;odbc32.lib;odbccp32.lib;%(AdditionalDependencies)</AdditionalDependencies> + <StackReserveSize>8000000</StackReserveSize> </Link> </ItemDefinitionGroup> <ItemGroup> diff --git a/LauncherInjector/main.cpp b/LauncherInjector/main.cpp index 5828e9e2..7697e80d 100644 --- a/LauncherInjector/main.cpp +++ b/LauncherInjector/main.cpp @@ -1,12 +1,25 @@ +#define WIN32_LEAN_AND_MEAN #include <Windows.h> #include <TlHelp32.h> #include <filesystem> #include <sstream> -#include <iostream> #include <fstream> +#include <Shlwapi.h> namespace fs = std::filesystem; +extern "C" { + __declspec(dllexport) DWORD AmdPowerXpressRequestHighPerformance = 0x00000001; + __declspec(dllexport) DWORD NvOptimusEnablement = 0x00000001; +} + +HMODULE hLauncherModule; +HMODULE hHookModule; +HMODULE hTier0Module; + +wchar_t exePath[4096]; +wchar_t buffer[8192]; + DWORD GetProcessByName(std::wstring processName) { HANDLE snapshot = CreateToolhelp32Snapshot(TH32CS_SNAPPROCESS, 0); @@ -33,132 +46,195 @@ DWORD GetProcessByName(std::wstring processName) return 0; } -#define PROCESS_NAME L"Titanfall2-unpacked.exe" -#define DLL_NAME L"Northstar.dll" +bool GetExePathWide(wchar_t* dest, DWORD destSize) +{ + if (!dest) return NULL; + if (destSize < MAX_PATH) return NULL; -int main(int argc, char* argv[]) { - if (!fs::exists(PROCESS_NAME)) + DWORD length = GetModuleFileNameW(NULL, dest, destSize); + return length && PathRemoveFileSpecW(dest); +} + +FARPROC GetLauncherMain() +{ + static FARPROC Launcher_LauncherMain; + if (!Launcher_LauncherMain) + Launcher_LauncherMain = GetProcAddress(hLauncherModule, "LauncherMain"); + return Launcher_LauncherMain; +} + +void LibraryLoadError(DWORD dwMessageId, const wchar_t* libName, const wchar_t* location) +{ + char text[4096]; + std::string message = std::system_category().message(dwMessageId); + + sprintf_s(text, "Failed to load the %ls at \"%ls\" (%lu):\n\n%hs\n\nMake sure you followed the Northstar installation instructions carefully.", libName, location, dwMessageId, message.c_str()); + + if (!fs::exists("Titanfall2.exe") && fs::exists("..\\Titanfall2.exe")) { - MessageBoxA(0, "Titanfall2-unpacked.exe not found! Please launch from your titanfall 2 directory and ensure you have Northstar installed correctly!", "", MB_OK); - return 1; + auto curDir = std::filesystem::current_path().filename().string(); + auto aboveDir = std::filesystem::current_path().parent_path().filename().string(); + sprintf_s(text, "%s\n\nWe detected that in your case you have extracted the files into a *subdirectory* of your Titanfall 2 installation.\nPlease move all the files and folders from current folder (\"%s\") into the Titanfall 2 installation directory just above (\"%s\").\n\nPlease try out the above steps by yourself before reaching out to the community for support.", text, curDir.c_str(), aboveDir.c_str()); } - if (!fs::exists(DLL_NAME)) + MessageBoxA(GetForegroundWindow(), text, "Northstar Launcher Error", 0); +} + +void EnsureOriginStarted() +{ + if (GetProcessByName(L"Origin.exe") || GetProcessByName(L"EADesktop.exe")) + return; // already started + + // unpacked exe will crash if origin isn't open on launch, so launch it + // get origin path from registry, code here is reversed from OriginSDK.dll + HKEY key; + if (RegOpenKeyExA(HKEY_LOCAL_MACHINE, "SOFTWARE\\WOW6432Node\\Origin", 0, KEY_READ, &key) != ERROR_SUCCESS) { - MessageBoxA(0, "Northstar.dll not found! Please launch from your titanfall 2 directory and ensure you have Northstar installed correctly!", "", MB_OK); - return 1; + MessageBoxA(0, "Error: failed reading Origin path!", "Northstar Launcher Error", MB_OK); + return; } - bool isdedi = false; - for (int i = 0; i < argc; i++) - if (!strcmp(argv[i], "-dedicated")) - isdedi = true; - - if (!isdedi && !GetProcessByName(L"Origin.exe") && !GetProcessByName(L"EADesktop.exe")) + char originPath[520]; + DWORD originPathLength = 520; + if (RegQueryValueExA(key, "ClientPath", 0, 0, (LPBYTE)&originPath, &originPathLength) != ERROR_SUCCESS) { - // unpacked exe will crash if origin isn't open on launch, so launch it - // get origin path from registry, code here is reversed from OriginSDK.dll - HKEY key; - if (RegOpenKeyExA(HKEY_LOCAL_MACHINE, "SOFTWARE\\WOW6432Node\\Origin", 0, KEY_READ, &key) != ERROR_SUCCESS) - { - MessageBoxA(0, "Error: failed reading origin path!", "", MB_OK); - return 1; - } + MessageBoxA(0, "Error: failed reading Origin path!", "Northstar Launcher Error", MB_OK); + return; + } - char originPath[520]; - DWORD originPathLength = 520; - if (RegQueryValueExA(key, "ClientPath", 0, 0, (LPBYTE)&originPath, &originPathLength) != ERROR_SUCCESS) - { - MessageBoxA(0, "Error: failed reading origin path!", "", MB_OK); - return 1; - } + PROCESS_INFORMATION pi; + memset(&pi, 0, sizeof(pi)); + STARTUPINFO si; + memset(&si, 0, sizeof(si)); + CreateProcessA(originPath, (char*)"", NULL, NULL, false, CREATE_DEFAULT_ERROR_MODE | CREATE_NEW_PROCESS_GROUP, NULL, NULL, (LPSTARTUPINFOA)&si, &pi); - PROCESS_INFORMATION pi; - memset(&pi, 0, sizeof(pi)); - STARTUPINFO si; - memset(&si, 0, sizeof(si)); - CreateProcessA(originPath, (LPSTR)"", NULL, NULL, false, CREATE_DEFAULT_ERROR_MODE | CREATE_NEW_PROCESS_GROUP, NULL, NULL, (LPSTARTUPINFOA)&si, &pi); + printf("[*] Waiting for Origin...\n"); - // wait for origin to be ready, this process is created when origin is ready enough to launch game without any errors - while (!GetProcessByName(L"OriginClientService.exe") && !GetProcessByName(L"EADesktop.exe")) - Sleep(200); - } + // wait for origin to be ready, this process is created when origin is ready enough to launch game without any errors + while (!GetProcessByName(L"OriginClientService.exe") && !GetProcessByName(L"EADesktop.exe")) + Sleep(200); - // get cmdline args from file - std::wstring args; - std::ifstream cmdlineArgFile; + CloseHandle(pi.hProcess); + CloseHandle(pi.hThread); +} - args.append(L" "); - for (int i = 0; i < argc; i++) +void PrependPath() +{ + wchar_t* pPath; + size_t len; + errno_t err = _wdupenv_s(&pPath, &len, L"PATH"); + if (!err) { - std::string str = argv[i]; - - args.append(std::wstring(str.begin(), str.end())); - args.append(L" "); + swprintf_s(buffer, L"PATH=%s\\bin\\x64_retail\\;%s", exePath, pPath); + auto result = _wputenv(buffer); + if (result == -1) + { + MessageBoxW(GetForegroundWindow(), L"Warning: could not prepend the current directory to app's PATH environment variable. Something may break because of that.", L"Northstar Launcher Warning", 0); + } + free(pPath); } - - if (!isdedi) - cmdlineArgFile = std::ifstream("ns_startup_args.txt"); else - cmdlineArgFile = std::ifstream("ns_startup_args_dedi.txt"); - - if (cmdlineArgFile) { - std::stringstream argBuffer; - argBuffer << cmdlineArgFile.rdbuf(); - cmdlineArgFile.close(); - - std::string str = argBuffer.str(); - args.append(std::wstring(str.begin(), str.end())); + MessageBoxW(GetForegroundWindow(), L"Warning: could not get current PATH environment variable in order to prepend the current directory to it. Something may break because of that.", L"Northstar Launcher Warning", 0); } +} - //if (isdedi) - // // copy -dedicated into args if we have it in commandline args - // args.append(L" -dedicated"); - - STARTUPINFO startupInfo; - PROCESS_INFORMATION processInfo; +bool ShouldLoadNorthstar(int argc, char* argv[]) +{ + bool loadNorthstar = true; + for (int i = 0; i < argc; i++) + if (!strcmp(argv[i], "-vanilla")) + loadNorthstar = false; - memset(&startupInfo, 0, sizeof(startupInfo)); - memset(&processInfo, 0, sizeof(processInfo)); + if (!loadNorthstar) + return loadNorthstar; - CreateProcessW(PROCESS_NAME, (LPWSTR)args.c_str(), NULL, NULL, FALSE, CREATE_SUSPENDED, NULL, NULL, &startupInfo, &processInfo); + auto runNorthstarFile = std::ifstream("run_northstar.txt"); + if (runNorthstarFile) + { + std::stringstream runNorthstarFileBuffer; + runNorthstarFileBuffer << runNorthstarFile.rdbuf(); + runNorthstarFile.close(); + if (runNorthstarFileBuffer.str()._Starts_with("0")) + loadNorthstar = false; + } + return loadNorthstar; +} - HMODULE hKernel32 = GetModuleHandleW(L"kernel32.dll"); - LPTHREAD_START_ROUTINE pLoadLibraryW = (LPTHREAD_START_ROUTINE)GetProcAddress(hKernel32, "LoadLibraryW"); +bool LoadNorthstar() +{ + FARPROC Hook_Init = nullptr; + { + swprintf_s(buffer, L"%s\\Northstar.dll", exePath); + hHookModule = LoadLibraryExW(buffer, 0i64, 8u); + if (hHookModule) Hook_Init = GetProcAddress(hHookModule, "InitialiseNorthstar"); + if (!hHookModule || Hook_Init == nullptr) + { + LibraryLoadError(GetLastError(), L"Northstar.dll", buffer); + return false; + } + } - SIZE_T dwLength = (wcslen(DLL_NAME) + 1) * 2; - LPVOID lpLibName = VirtualAllocEx(processInfo.hProcess, NULL, dwLength, MEM_COMMIT, PAGE_READWRITE); + ((bool (*)()) Hook_Init)(); + return true; +} - SIZE_T written = 0; - WriteProcessMemory(processInfo.hProcess, lpLibName, DLL_NAME, dwLength, &written); +int main(int argc, char* argv[]) { - HANDLE hThread = CreateRemoteThread(processInfo.hProcess, NULL, NULL, pLoadLibraryW, lpLibName, NULL, NULL); + // checked to avoid starting origin, Northstar.dll will check for -dedicated as well on its own + bool noOriginStartup = false; + for (int i = 0; i < argc; i++) + if (!strcmp(argv[i], "-noOriginStartup") || !strcmp(argv[i], "-dedicated")) + noOriginStartup = true; - if (hThread == NULL) + if (!noOriginStartup) { - // injection failed - - std::string errorMessage = "Injection failed! CreateRemoteThread returned "; - errorMessage += std::to_string(GetLastError()).c_str(); - errorMessage += ", make sure bob hasn't accidentally shipped a debug build"; - - MessageBoxA(0, errorMessage.c_str(), "", MB_OK); - return 0; + EnsureOriginStarted(); } - WaitForSingleObject(hThread, INFINITE); - - //MessageBoxA(0, std::to_string(GetLastError()).c_str(), "", MB_OK); + { + if (!GetExePathWide(exePath, sizeof(exePath))) + { + MessageBoxA(GetForegroundWindow(), "Failed getting game directory.\nThe game cannot continue and has to exit.", "Northstar Launcher Error", 0); + return 1; + } - CloseHandle(hThread); + PrependPath(); - ResumeThread(processInfo.hThread); + printf("[*] Loading tier0.dll\n"); + swprintf_s(buffer, L"%s\\bin\\x64_retail\\tier0.dll", exePath); + hTier0Module = LoadLibraryExW(buffer, 0, LOAD_WITH_ALTERED_SEARCH_PATH); + if (!hTier0Module) + { + LibraryLoadError(GetLastError(), L"tier0.dll", buffer); + return 1; + } - VirtualFreeEx(processInfo.hProcess, lpLibName, dwLength, MEM_RELEASE); + bool loadNorthstar = ShouldLoadNorthstar(argc, argv); + if (loadNorthstar) + { + printf("[*] Loading Northstar\n"); + if (!LoadNorthstar()) + return 1; + } + else + printf("[*] Going to load the vanilla game\n"); - CloseHandle(processInfo.hProcess); - CloseHandle(processInfo.hThread); + printf("[*] Loading launcher.dll\n"); + swprintf_s(buffer, L"%s\\bin\\x64_retail\\launcher.dll", exePath); + hLauncherModule = LoadLibraryExW(buffer, 0, LOAD_WITH_ALTERED_SEARCH_PATH); + if (!hLauncherModule) + { + LibraryLoadError(GetLastError(), L"launcher.dll", buffer); + return 1; + } + } - return 0; + printf("[*] Launching the game...\n"); + auto LauncherMain = GetLauncherMain(); + if (!LauncherMain) + MessageBoxA(GetForegroundWindow(), "Failed loading launcher.dll.\nThe game cannot continue and has to exit.", "Northstar Launcher Error", 0); + //auto result = ((__int64(__fastcall*)())LauncherMain)(); + //auto result = ((signed __int64(__fastcall*)(__int64))LauncherMain)(0i64); + return ((int(/*__fastcall*/*)(HINSTANCE, HINSTANCE, LPSTR, int))LauncherMain)(NULL, NULL, NULL, 0); // the parameters aren't really used anyways }
\ No newline at end of file diff --git a/NorthstarDedicatedTest/NorthstarDedicatedTest.vcxproj b/NorthstarDedicatedTest/NorthstarDedicatedTest.vcxproj index 0fd30949..299cf2ec 100644 --- a/NorthstarDedicatedTest/NorthstarDedicatedTest.vcxproj +++ b/NorthstarDedicatedTest/NorthstarDedicatedTest.vcxproj @@ -1,14 +1,6 @@ <?xml version="1.0" encoding="utf-8"?> <Project DefaultTargets="Build" xmlns="http://schemas.microsoft.com/developer/msbuild/2003"> <ItemGroup Label="ProjectConfigurations"> - <ProjectConfiguration Include="Debug|Win32"> - <Configuration>Debug</Configuration> - <Platform>Win32</Platform> - </ProjectConfiguration> - <ProjectConfiguration Include="Release|Win32"> - <Configuration>Release</Configuration> - <Platform>Win32</Platform> - </ProjectConfiguration> <ProjectConfiguration Include="Debug|x64"> <Configuration>Debug</Configuration> <Platform>x64</Platform> @@ -27,19 +19,6 @@ <ProjectName>Northstar</ProjectName> </PropertyGroup> <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" /> - <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="Configuration"> - <ConfigurationType>DynamicLibrary</ConfigurationType> - <UseDebugLibraries>true</UseDebugLibraries> - <PlatformToolset>v143</PlatformToolset> - <CharacterSet>Unicode</CharacterSet> - </PropertyGroup> - <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration"> - <ConfigurationType>DynamicLibrary</ConfigurationType> - <UseDebugLibraries>false</UseDebugLibraries> - <PlatformToolset>v143</PlatformToolset> - <WholeProgramOptimization>true</WholeProgramOptimization> - <CharacterSet>Unicode</CharacterSet> - </PropertyGroup> <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="Configuration"> <ConfigurationType>DynamicLibrary</ConfigurationType> <UseDebugLibraries>true</UseDebugLibraries> @@ -58,12 +37,6 @@ </ImportGroup> <ImportGroup Label="Shared"> </ImportGroup> - <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'"> - <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" /> - </ImportGroup> - <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Release|Win32'"> - <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" /> - </ImportGroup> <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Debug|x64'"> <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" /> </ImportGroup> @@ -71,61 +44,17 @@ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" /> </ImportGroup> <PropertyGroup Label="UserMacros" /> - <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'"> - <LinkIncremental>true</LinkIncremental> - </PropertyGroup> - <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'"> - <LinkIncremental>false</LinkIncremental> - </PropertyGroup> <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'"> <LinkIncremental>true</LinkIncremental> </PropertyGroup> <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'"> <LinkIncremental>false</LinkIncremental> </PropertyGroup> - <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'"> - <ClCompile> - <WarningLevel>Level3</WarningLevel> - <SDLCheck>true</SDLCheck> - <PreprocessorDefinitions>WIN32;_DEBUG;NORTHSTARDEDICATEDTEST_EXPORTS;_WINDOWS;_USRDLL;%(PreprocessorDefinitions)</PreprocessorDefinitions> - <ConformanceMode>true</ConformanceMode> - <PrecompiledHeader>Use</PrecompiledHeader> - <PrecompiledHeaderFile>pch.h</PrecompiledHeaderFile> - <LanguageStandard>stdcpp17</LanguageStandard> - </ClCompile> - <Link> - <SubSystem>Windows</SubSystem> - <GenerateDebugInformation>true</GenerateDebugInformation> - <EnableUAC>false</EnableUAC> - <AdditionalDependencies>%(AdditionalDependencies)</AdditionalDependencies> - </Link> - </ItemDefinitionGroup> - <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'"> - <ClCompile> - <WarningLevel>Level3</WarningLevel> - <FunctionLevelLinking>true</FunctionLevelLinking> - <IntrinsicFunctions>true</IntrinsicFunctions> - <SDLCheck>true</SDLCheck> - <PreprocessorDefinitions>WIN32;NDEBUG;NORTHSTARDEDICATEDTEST_EXPORTS;_WINDOWS;_USRDLL;%(PreprocessorDefinitions)</PreprocessorDefinitions> - <ConformanceMode>true</ConformanceMode> - <PrecompiledHeader>Use</PrecompiledHeader> - <PrecompiledHeaderFile>pch.h</PrecompiledHeaderFile> - <LanguageStandard>stdcpp17</LanguageStandard> - </ClCompile> - <Link> - <SubSystem>Windows</SubSystem> - <EnableCOMDATFolding>true</EnableCOMDATFolding> - <OptimizeReferences>true</OptimizeReferences> - <GenerateDebugInformation>true</GenerateDebugInformation> - <EnableUAC>false</EnableUAC> - <AdditionalDependencies>%(AdditionalDependencies)</AdditionalDependencies> - </Link> - </ItemDefinitionGroup> <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'"> <ClCompile> <WarningLevel>Level3</WarningLevel> <SDLCheck>true</SDLCheck> - <PreprocessorDefinitions>_DEBUG;NORTHSTARDEDICATEDTEST_EXPORTS;_WINDOWS;_USRDLL;%(PreprocessorDefinitions)</PreprocessorDefinitions> + <PreprocessorDefinitions>_DEBUG;NORTHSTARDEDICATEDTEST_EXPORTS;_WINDOWS;_USRDLL;%(PreprocessorDefinitions);CURL_STATICLIB</PreprocessorDefinitions> <ConformanceMode>true</ConformanceMode> <PrecompiledHeader>Use</PrecompiledHeader> <PrecompiledHeaderFile>pch.h</PrecompiledHeaderFile> @@ -136,9 +65,10 @@ <SubSystem>Windows</SubSystem> <GenerateDebugInformation>true</GenerateDebugInformation> <EnableUAC>false</EnableUAC> - <AdditionalDependencies>$(ProjectDir)include\MinHook.x64.lib;$(ProjectDir)include\libcrypto_static.lib;$(ProjectDir)include\libssl_static.lib;dbghelp.lib;%(AdditionalDependencies)</AdditionalDependencies> + <AdditionalDependencies>$(ProjectDir)include\MinHook.x64.lib;$(ProjectDir)include\libcurl\lib\libcurl_a.lib;dbghelp.lib;Wldap32.lib;Normaliz.lib;%(AdditionalDependencies)</AdditionalDependencies> <ForceSymbolReferences> </ForceSymbolReferences> + <AdditionalLibraryDirectories>%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories> </Link> <PreBuildEvent> <Command> @@ -151,12 +81,13 @@ <FunctionLevelLinking>true</FunctionLevelLinking> <IntrinsicFunctions>true</IntrinsicFunctions> <SDLCheck>true</SDLCheck> - <PreprocessorDefinitions>NDEBUG;NORTHSTARDEDICATEDTEST_EXPORTS;_WINDOWS;_USRDLL;%(PreprocessorDefinitions)</PreprocessorDefinitions> + <PreprocessorDefinitions>NDEBUG;NORTHSTARDEDICATEDTEST_EXPORTS;_WINDOWS;_USRDLL;%(PreprocessorDefinitions);CURL_STATICLIB</PreprocessorDefinitions> <ConformanceMode>true</ConformanceMode> <PrecompiledHeader>Use</PrecompiledHeader> <PrecompiledHeaderFile>pch.h</PrecompiledHeaderFile> <LanguageStandard>stdcpp17</LanguageStandard> <AdditionalIncludeDirectories>$(ProjectDir)include;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories> + <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary> </ClCompile> <Link> <SubSystem>Windows</SubSystem> @@ -164,9 +95,10 @@ <OptimizeReferences>true</OptimizeReferences> <GenerateDebugInformation>true</GenerateDebugInformation> <EnableUAC>false</EnableUAC> - <AdditionalDependencies>$(ProjectDir)include\MinHook.x64.lib;$(ProjectDir)include\libcrypto_static.lib;$(ProjectDir)include\libssl_static.lib;dbghelp.lib;%(AdditionalDependencies)</AdditionalDependencies> + <AdditionalDependencies>$(ProjectDir)include\MinHook.x64.lib;$(ProjectDir)include\libcurl\lib\libcurl_a.lib;dbghelp.lib;Wldap32.lib;Normaliz.lib;%(AdditionalDependencies)</AdditionalDependencies> <ForceSymbolReferences> </ForceSymbolReferences> + <AdditionalLibraryDirectories>%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories> </Link> <PreBuildEvent> <Command> @@ -174,6 +106,7 @@ </PreBuildEvent> </ItemDefinitionGroup> <ItemGroup> + <ClInclude Include="bansystem.h" /> <ClInclude Include="chatcommand.h" /> <ClInclude Include="clientauthhooks.h" /> <ClInclude Include="concommand.h" /> @@ -309,6 +242,16 @@ <ClInclude Include="include\internal\unicode.h" /> <ClInclude Include="include\internal\__DECC_INCLUDE_EPILOGUE.H" /> <ClInclude Include="include\internal\__DECC_INCLUDE_PROLOGUE.H" /> + <ClInclude Include="include\libcurl\include\curl\curl.h" /> + <ClInclude Include="include\libcurl\include\curl\curlver.h" /> + <ClInclude Include="include\libcurl\include\curl\easy.h" /> + <ClInclude Include="include\libcurl\include\curl\mprintf.h" /> + <ClInclude Include="include\libcurl\include\curl\multi.h" /> + <ClInclude Include="include\libcurl\include\curl\options.h" /> + <ClInclude Include="include\libcurl\include\curl\stdcheaders.h" /> + <ClInclude Include="include\libcurl\include\curl\system.h" /> + <ClInclude Include="include\libcurl\include\curl\typecheck-gcc.h" /> + <ClInclude Include="include\libcurl\include\curl\urlapi.h" /> <ClInclude Include="include\MinHook.h" /> <ClInclude Include="include\openssl\aes.h" /> <ClInclude Include="include\openssl\asn1.h" /> @@ -573,9 +516,11 @@ <ClInclude Include="include\spdlog\tweakme.h" /> <ClInclude Include="include\spdlog\version.h" /> <ClInclude Include="keyvalues.h" /> + <ClInclude Include="languagehooks.h" /> <ClInclude Include="logging.h" /> <ClInclude Include="main.h" /> <ClInclude Include="masterserver.h" /> + <ClInclude Include="maxplayers.h" /> <ClInclude Include="memalloc.h" /> <ClInclude Include="miscclientfixes.h" /> <ClInclude Include="misccommands.h" /> @@ -586,6 +531,7 @@ <ClInclude Include="pdef.h" /> <ClInclude Include="playlist.h" /> <ClInclude Include="miscserverscript.h" /> + <ClInclude Include="rpakfilesystem.h" /> <ClInclude Include="scriptbrowserhooks.h" /> <ClInclude Include="scriptmainmenupromos.h" /> <ClInclude Include="securitypatches.h" /> @@ -599,6 +545,7 @@ <ClInclude Include="squirrel.h" /> </ItemGroup> <ItemGroup> + <ClCompile Include="bansystem.cpp" /> <ClCompile Include="chatcommand.cpp" /> <ClCompile Include="clientauthhooks.cpp" /> <ClCompile Include="concommand.cpp" /> @@ -612,6 +559,8 @@ <ClCompile Include="hooks.cpp" /> <ClCompile Include="hookutils.cpp" /> <ClCompile Include="keyvalues.cpp" /> + <ClCompile Include="maxplayers.cpp" /> + <ClCompile Include="languagehooks.cpp" /> <ClCompile Include="memalloc.cpp" /> <ClCompile Include="miscclientfixes.cpp" /> <ClCompile Include="misccommands.cpp" /> @@ -621,13 +570,12 @@ <ClCompile Include="masterserver.cpp" /> <ClCompile Include="modmanager.cpp" /> <ClCompile Include="pch.cpp"> - <PrecompiledHeader Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">Create</PrecompiledHeader> <PrecompiledHeader Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">Create</PrecompiledHeader> - <PrecompiledHeader Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">Create</PrecompiledHeader> <PrecompiledHeader Condition="'$(Configuration)|$(Platform)'=='Release|x64'">Create</PrecompiledHeader> </ClCompile> <ClCompile Include="pdef.cpp" /> <ClCompile Include="playlist.cpp" /> + <ClCompile Include="rpakfilesystem.cpp" /> <ClCompile Include="scriptbrowserhooks.cpp" /> <ClCompile Include="scriptmainmenupromos.cpp" /> <ClCompile Include="securitypatches.cpp" /> diff --git a/NorthstarDedicatedTest/NorthstarDedicatedTest.vcxproj.filters b/NorthstarDedicatedTest/NorthstarDedicatedTest.vcxproj.filters index 306ac763..aaa99a14 100644 --- a/NorthstarDedicatedTest/NorthstarDedicatedTest.vcxproj.filters +++ b/NorthstarDedicatedTest/NorthstarDedicatedTest.vcxproj.filters @@ -118,6 +118,9 @@ <Filter Include="Header Files\include\openssl\crypto"> <UniqueIdentifier>{8cc1ae44-9dbf-4719-91a2-82e00b8d78e2}</UniqueIdentifier> </Filter> + <Filter Include="Header Files\include\libcurl"> + <UniqueIdentifier>{ea1e17a6-40b7-4e1b-8edb-e9ae704ce604}</UniqueIdentifier> + </Filter> </ItemGroup> <ItemGroup> <ClInclude Include="pch.h"> @@ -1389,6 +1392,48 @@ <ClInclude Include="miscserverfixes.h"> <Filter>Header Files\Server</Filter> </ClInclude> + <ClInclude Include="maxplayers.h"> + <Filter>Header Files\Shared</Filter> + </ClInclude> + <ClInclude Include="include\libcurl\include\curl\curl.h"> + <Filter>Header Files\include\libcurl</Filter> + </ClInclude> + <ClInclude Include="include\libcurl\include\curl\curlver.h"> + <Filter>Header Files\include\libcurl</Filter> + </ClInclude> + <ClInclude Include="include\libcurl\include\curl\easy.h"> + <Filter>Header Files\include\libcurl</Filter> + </ClInclude> + <ClInclude Include="include\libcurl\include\curl\mprintf.h"> + <Filter>Header Files\include\libcurl</Filter> + </ClInclude> + <ClInclude Include="include\libcurl\include\curl\multi.h"> + <Filter>Header Files\include\libcurl</Filter> + </ClInclude> + <ClInclude Include="include\libcurl\include\curl\options.h"> + <Filter>Header Files\include\libcurl</Filter> + </ClInclude> + <ClInclude Include="include\libcurl\include\curl\stdcheaders.h"> + <Filter>Header Files\include\libcurl</Filter> + </ClInclude> + <ClInclude Include="include\libcurl\include\curl\system.h"> + <Filter>Header Files\include\libcurl</Filter> + </ClInclude> + <ClInclude Include="include\libcurl\include\curl\typecheck-gcc.h"> + <Filter>Header Files\include\libcurl</Filter> + </ClInclude> + <ClInclude Include="include\libcurl\include\curl\urlapi.h"> + <Filter>Header Files\include\libcurl</Filter> + </ClInclude> + <ClInclude Include="rpakfilesystem.h"> + <Filter>Header Files\Shared</Filter> + </ClInclude> + <ClInclude Include="bansystem.h"> + <Filter>Header Files\Server\Authentication</Filter> + </ClInclude> + <ClInclude Include="languagehooks.h"> + <Filter>Header Files\Client</Filter> + </ClInclude> </ItemGroup> <ItemGroup> <ClCompile Include="dllmain.cpp"> @@ -1496,9 +1541,21 @@ <ClCompile Include="miscclientfixes.cpp"> <Filter>Source Files\Client</Filter> </ClCompile> + <ClCompile Include="maxplayers.cpp"> + <Filter>Source Files\Shared</Filter> + </ClCompile> <ClCompile Include="miscserverfixes.cpp"> <Filter>Source Files\Server</Filter> </ClCompile> + <ClCompile Include="rpakfilesystem.cpp"> + <Filter>Source Files\Shared</Filter> + </ClCompile> + <ClCompile Include="bansystem.cpp"> + <Filter>Source Files\Server\Authentication</Filter> + </ClCompile> + <ClCompile Include="languagehooks.cpp"> + <Filter>Source Files\Client</Filter> + </ClCompile> </ItemGroup> <ItemGroup> <None Include="include\spdlog\fmt\bundled\LICENSE.rst"> diff --git a/NorthstarDedicatedTest/bansystem.cpp b/NorthstarDedicatedTest/bansystem.cpp new file mode 100644 index 00000000..610c20e4 --- /dev/null +++ b/NorthstarDedicatedTest/bansystem.cpp @@ -0,0 +1,105 @@ +#pragma once +#include "pch.h" +#include "bansystem.h" +#include "serverauthentication.h" +#include "concommand.h" +#include "miscserverscript.h" +#include <filesystem> + +const char* BANLIST_PATH = "R2Northstar/banlist.txt"; + +ServerBanSystem* g_ServerBanSystem; + +void ServerBanSystem::OpenBanlist() +{ + std::ifstream enabledModsStream(BANLIST_PATH); + std::stringstream enabledModsStringStream; + + if (!enabledModsStream.fail()) + { + std::string line; + while (std::getline(enabledModsStream, line)) + m_vBannedUids.push_back(strtoll(line.c_str(), nullptr, 10)); + + enabledModsStream.close(); + } + + // open write stream for banlist + m_sBanlistStream.open(BANLIST_PATH, std::ofstream::out | std::ofstream::binary | std::ofstream::app); +} + +void ServerBanSystem::ClearBanlist() +{ + m_vBannedUids.clear(); + + // reopen the file, don't provide std::ofstream::app so it clears on open + m_sBanlistStream.close(); + m_sBanlistStream.open(BANLIST_PATH, std::ofstream::out | std::ofstream::binary); +} + +void ServerBanSystem::BanUID(uint64_t uid) +{ + m_vBannedUids.push_back(uid); + m_sBanlistStream << std::to_string(uid) << std::endl; + spdlog::info("{} was banned", uid); +} + +void ServerBanSystem::UnbanUID(uint64_t uid) +{ + auto findResult = std::find(m_vBannedUids.begin(), m_vBannedUids.end(), uid); + if (findResult == m_vBannedUids.end()) + return; + + m_vBannedUids.erase(findResult); + spdlog::info("{} was unbanned", uid); + // todo: this needs to erase from the banlist file + // atm unsure how to do this aside from just clearing and fully rewriting the file +} + +bool ServerBanSystem::IsUIDAllowed(uint64_t uid) +{ + return std::find(m_vBannedUids.begin(), m_vBannedUids.end(), uid) == m_vBannedUids.end(); +} + +void BanPlayerCommand(const CCommand& args) +{ + if (args.ArgC() < 2) + return; + + // assuming maxplayers 32 + for (int i = 0; i < 32; i++) + { + void* player = GetPlayerByIndex(i); + + if (!strcmp((char*)player + 0x16, args.Arg(1)) || strcmp((char*)player + 0xF500, args.Arg(1))) + { + g_ServerBanSystem->BanUID(strtoll((char*)player + 0xF500, nullptr, 10)); + CBaseClient__Disconnect(player, 1, "Banned from server"); + break; + } + } +} + +void UnbanPlayerCommand(const CCommand& args) +{ + if (args.ArgC() < 2) + return; + + // assumedly the player being unbanned here wasn't already connected, so don't need to iterate over players or anything + g_ServerBanSystem->UnbanUID(strtoll(args.Arg(1), nullptr, 10)); +} + +void ClearBanlistCommand(const CCommand& args) +{ + g_ServerBanSystem->ClearBanlist(); +} + +void InitialiseBanSystem(HMODULE baseAddress) +{ + g_ServerBanSystem = new ServerBanSystem; + g_ServerBanSystem->OpenBanlist(); + + RegisterConCommand("ban", BanPlayerCommand, "bans a given player by uid or name", FCVAR_GAMEDLL); + RegisterConCommand("unban", UnbanPlayerCommand, "unbans a given player by uid", FCVAR_NONE); + RegisterConCommand("clearbanlist", ClearBanlistCommand, "clears all uids on the banlist", FCVAR_NONE); +}
\ No newline at end of file diff --git a/NorthstarDedicatedTest/bansystem.h b/NorthstarDedicatedTest/bansystem.h new file mode 100644 index 00000000..8ce05308 --- /dev/null +++ b/NorthstarDedicatedTest/bansystem.h @@ -0,0 +1,20 @@ +#pragma once +#include <fstream> + +class ServerBanSystem +{ +private: + std::ofstream m_sBanlistStream; + std::vector<uint64_t> m_vBannedUids; + +public: + void OpenBanlist(); + void ClearBanlist(); + void BanUID(uint64_t uid); + void UnbanUID(uint64_t uid); + bool IsUIDAllowed(uint64_t uid); +}; + +extern ServerBanSystem* g_ServerBanSystem; + +void InitialiseBanSystem(HMODULE baseAddress);
\ No newline at end of file diff --git a/NorthstarDedicatedTest/convar.cpp b/NorthstarDedicatedTest/convar.cpp index ed7e8dac..de460662 100644 --- a/NorthstarDedicatedTest/convar.cpp +++ b/NorthstarDedicatedTest/convar.cpp @@ -20,7 +20,7 @@ ConVar* RegisterConVar(const char* name, const char* defaultValue, int flags, co ConVar* newVar = new ConVar; conVarConstructor(newVar, name, defaultValue, flags, helpString); - g_CustomConvars.insert(std::make_pair(name, newVar)); + g_CustomConvars.emplace(name, newVar); return newVar; } diff --git a/NorthstarDedicatedTest/dedicated.cpp b/NorthstarDedicatedTest/dedicated.cpp index 83a9950a..1359a33e 100644 --- a/NorthstarDedicatedTest/dedicated.cpp +++ b/NorthstarDedicatedTest/dedicated.cpp @@ -6,13 +6,14 @@ bool IsDedicated() { - return CommandLine()->CheckParm("-dedicated"); + //return CommandLine()->CheckParm("-dedicated"); + return strstr(GetCommandLineA(), "-dedicated"); } // CDedidcatedExports defs struct CDedicatedExports; // forward declare -typedef void (*DedicatedSys_PrintfType)(CDedicatedExports* dedicated, char* msg); +typedef void (*DedicatedSys_PrintfType)(CDedicatedExports* dedicated, const char* msg); typedef void (*DedicatedRunServerType)(CDedicatedExports* dedicated); // would've liked to just do this as a class but have not been able to get it to work @@ -26,7 +27,7 @@ struct CDedicatedExports DedicatedRunServerType RunServer; }; -void Sys_Printf(CDedicatedExports* dedicated, char* msg) +void Sys_Printf(CDedicatedExports* dedicated, const char* msg) { spdlog::info("[DEDICATED PRINT] {}", msg); } @@ -35,7 +36,7 @@ typedef void(*CHostState__InitType)(CHostState* self); void RunServer(CDedicatedExports* dedicated) { - Sys_Printf(dedicated, (char*)"CDedicatedExports::RunServer(): starting"); + Sys_Printf(dedicated, "CDedicatedExports::RunServer(): starting"); // init hoststate, if we don't do this, we get a crash later on CHostState__InitType CHostState__Init = (CHostState__InitType)((char*)GetModuleHandleA("engine.dll") + 0x16E110); @@ -76,6 +77,32 @@ bool IsGameActiveWindowHook() return true; } +HANDLE consoleInputThreadHandle = NULL; + +DWORD WINAPI ConsoleInputThread(PVOID pThreadParameter) +{ + while (!g_pEngine || !g_pHostState || g_pHostState->m_iCurrentState != HostState_t::HS_RUN) + Sleep(1000); + + // Bind stdin to receive console input. + FILE* fp = nullptr; + freopen_s(&fp, "CONIN$", "r", stdin); + + spdlog::info("Ready to receive console commands."); + + { + // Process console input + std::string input; + while (g_pEngine && g_pEngine->m_nQuitting == EngineQuitState::QUIT_NOTQUITTING && std::getline(std::cin, input)) + { + input += "\n"; + Cbuf_AddText(Cbuf_GetCurrentPlayer(), input.c_str(), cmd_source_t::kCommandSrcCode); + } + } + + return 0; +} + void InitialiseDedicated(HMODULE engineAddress) { if (!IsDedicated()) @@ -209,7 +236,7 @@ void InitialiseDedicated(HMODULE engineAddress) TempReadWrite rw(ptr); // remove call to Shader_Connect - *ptr = 0x90; + *ptr = (char)0x90; *(ptr + 1) = (char)0x90; *(ptr + 2) = (char)0x90; *(ptr + 3) = (char)0x90; @@ -246,7 +273,7 @@ void InitialiseDedicated(HMODULE engineAddress) TempReadWrite rw(ptr); // remove call to ui loading stuff - *ptr = 0x90; + *ptr = (char)0x90; *(ptr + 1) = (char)0x90; *(ptr + 2) = (char)0x90; *(ptr + 3) = (char)0x90; @@ -380,25 +407,43 @@ void InitialiseDedicated(HMODULE engineAddress) CommandLine()->AppendParm("+host_preload_shaders", "0"); CommandLine()->AppendParm("+net_usesocketsforloopback", "1"); CommandLine()->AppendParm("+exec", "autoexec_ns_server"); + + // Disable Quick Edit mode to reduce chance of user unintentionally hanging their server by selecting something. + if (!CommandLine()->CheckParm("-bringbackquickedit")) + { + HANDLE stdIn = GetStdHandle(STD_INPUT_HANDLE); + DWORD mode = 0; + + if (GetConsoleMode(stdIn, &mode)) { + if (mode & ENABLE_QUICK_EDIT_MODE) { + mode &= ~ENABLE_QUICK_EDIT_MODE; + mode &= ~ENABLE_MOUSE_INPUT; + + mode |= ENABLE_PROCESSED_INPUT; + + SetConsoleMode(stdIn, mode); + } + } + } else spdlog::info("Quick Edit enabled by user request"); + + // create console input thread + if (!CommandLine()->CheckParm("-noconsoleinput")) + consoleInputThreadHandle = CreateThread(0, 0, ConsoleInputThread, 0, 0, NULL); + else spdlog::info("Console input disabled by user request"); } -typedef void(*Tier0_InitOriginType)(); -Tier0_InitOriginType Tier0_InitOrigin; -void Tier0_InitOriginHook() +void InitialiseDedicatedOrigin(HMODULE baseAddress) { // disable origin on dedicated // for any big ea lawyers, this can't be used to play the game without origin, game will throw a fit if you try to do anything without an origin id as a client // for dedi it's fine though, game doesn't care if origin is disabled as long as there's only a server - Tier0_InitOrigin(); -} -void InitialiseDedicatedOrigin(HMODULE baseAddress) -{ if (!IsDedicated()) return; - HookEnabler hook; - ENABLER_CREATEHOOK(hook, GetProcAddress(GetModuleHandleA("tier0.dll"), "Tier0_InitOrigin"), &Tier0_InitOriginHook, reinterpret_cast<LPVOID*>(&Tier0_InitOrigin)); + char* ptr = (char*)GetProcAddress(GetModuleHandleA("tier0.dll"), "Tier0_InitOrigin"); + TempReadWrite rw(ptr); + *ptr = (char)0xC3; // ret } typedef void(*PrintFatalSquirrelErrorType)(void* sqvm); diff --git a/NorthstarDedicatedTest/dedicatedmaterialsystem.cpp b/NorthstarDedicatedTest/dedicatedmaterialsystem.cpp index 7097e11a..1d0e13b6 100644 --- a/NorthstarDedicatedTest/dedicatedmaterialsystem.cpp +++ b/NorthstarDedicatedTest/dedicatedmaterialsystem.cpp @@ -59,7 +59,7 @@ void InitialiseDedicatedMaterialSystem(HMODULE baseAddress) TempReadWrite rw(ptr); // make the game always use the error material - *ptr = 0xE9; + *ptr = (char)0xE9; *(ptr + 1) = (char)0x34; *(ptr + 2) = (char)0x03; *(ptr + 3) = (char)0x00; diff --git a/NorthstarDedicatedTest/dllmain.cpp b/NorthstarDedicatedTest/dllmain.cpp index 78edb297..83e78f4e 100644 --- a/NorthstarDedicatedTest/dllmain.cpp +++ b/NorthstarDedicatedTest/dllmain.cpp @@ -25,7 +25,11 @@ #include "scriptmainmenupromos.h" #include "miscclientfixes.h" #include "miscserverfixes.h" +#include "rpakfilesystem.h" +#include "bansystem.h" #include "memalloc.h" +#include "maxplayers.h" +#include "languagehooks.h" bool initialised = false; @@ -43,10 +47,6 @@ BOOL APIENTRY DllMain( HMODULE hModule, break; } - if (!initialised) - InitialiseNorthstar(); - initialised = true; - return TRUE; } @@ -56,33 +56,39 @@ void WaitForDebugger(HMODULE baseAddress) if (CommandLine()->CheckParm("-waitfordebugger")) { spdlog::info("waiting for debugger..."); - spdlog::info("{} bytes have been statically allocated", g_iStaticAllocated); while (!IsDebuggerPresent()) Sleep(100); } } -// in the future this will be called from launcher instead of dllmain -void InitialiseNorthstar() +bool InitialiseNorthstar() { + if (initialised) + { + //spdlog::warn("Called InitialiseNorthstar more than once!"); // it's actually 100% fine for that to happen + return false; + } + + initialised = true; + + curl_global_init_mem(CURL_GLOBAL_DEFAULT, _malloc_base, _free_base, _realloc_base, _strdup_base, _calloc_base); + InitialiseLogging(); // apply initial hooks InstallInitialHooks(); InitialiseInterfaceCreationHooks(); - // adding a callback to tier0 won't work for some reason - AddDllLoadCallback("launcher.dll", InitialiseTier0GameUtilFunctions); + AddDllLoadCallback("tier0.dll", InitialiseTier0GameUtilFunctions); AddDllLoadCallback("engine.dll", WaitForDebugger); AddDllLoadCallback("engine.dll", InitialiseEngineGameUtilFunctions); AddDllLoadCallback("server.dll", InitialiseServerGameUtilFunctions); - AddDllLoadCallback("engine.dll", InitialiseEngineSpewFuncHooks); // dedi patches { + AddDllLoadCallback("tier0.dll", InitialiseDedicatedOrigin); AddDllLoadCallback("engine.dll", InitialiseDedicated); - AddDllLoadCallback("launcher.dll", InitialiseDedicatedOrigin); AddDllLoadCallback("server.dll", InitialiseDedicatedServerGameDLL); AddDllLoadCallback("materialsystem_dx11.dll", InitialiseDedicatedMaterialSystem); // this fucking sucks, but seemingly we somehow load after rtech_game???? unsure how, but because of this we have to apply patches here, not on rtech_game load @@ -94,6 +100,7 @@ void InitialiseNorthstar() // client-exclusive patches { + AddDllLoadCallback("tier0.dll", InitialiseTier0LanguageHooks); AddDllLoadCallback("engine.dll", InitialiseClientEngineSecurityPatches); AddDllLoadCallback("client.dll", InitialiseClientSquirrel); AddDllLoadCallback("client.dll", InitialiseSourceConsole); @@ -107,8 +114,11 @@ void InitialiseNorthstar() AddDllLoadCallback("client.dll", InitialiseMiscClientFixes); } + AddDllLoadCallback("engine.dll", InitialiseEngineSpewFuncHooks); AddDllLoadCallback("server.dll", InitialiseServerSquirrel); + AddDllLoadCallback("engine.dll", InitialiseBanSystem); AddDllLoadCallback("engine.dll", InitialiseServerAuthentication); + AddDllLoadCallback("server.dll", InitialiseServerAuthenticationServerDLL); AddDllLoadCallback("engine.dll", InitialiseSharedMasterServer); AddDllLoadCallback("server.dll", InitialiseMiscServerScriptCommand); AddDllLoadCallback("server.dll", InitialiseMiscServerFixes); @@ -116,8 +126,19 @@ void InitialiseNorthstar() AddDllLoadCallback("engine.dll", InitialisePlaylistHooks); AddDllLoadCallback("filesystem_stdio.dll", InitialiseFilesystem); + AddDllLoadCallback("engine.dll", InitialiseEngineRpakFilesystem); AddDllLoadCallback("engine.dll", InitialiseKeyValues); + // maxplayers increase + AddDllLoadCallback("engine.dll", InitialiseMaxPlayersOverride_Engine); + AddDllLoadCallback("client.dll", InitialiseMaxPlayersOverride_Client); + AddDllLoadCallback("server.dll", InitialiseMaxPlayersOverride_Server); + // mod manager after everything else AddDllLoadCallback("engine.dll", InitialiseModManager); + + // run callbacks for any libraries that are already loaded by now + CallAllPendingDLLLoadCallbacks(); + + return true; }
\ No newline at end of file diff --git a/NorthstarDedicatedTest/filesystem.cpp b/NorthstarDedicatedTest/filesystem.cpp index 89eb9423..1fe3ec9d 100644 --- a/NorthstarDedicatedTest/filesystem.cpp +++ b/NorthstarDedicatedTest/filesystem.cpp @@ -57,7 +57,7 @@ std::string ReadVPKFile(const char* path) char data[4096]; do { - bytesRead = (*g_Filesystem)->m_vtable2->Read(&(*g_Filesystem)->m_vtable2, data, std::size(data), fileHandle); + bytesRead = (*g_Filesystem)->m_vtable2->Read(&(*g_Filesystem)->m_vtable2, data, (int)std::size(data), fileHandle); fileStream.write(data, bytesRead); } while (bytesRead == std::size(data)); diff --git a/NorthstarDedicatedTest/gameutils.cpp b/NorthstarDedicatedTest/gameutils.cpp index 642c44e6..1cbd8648 100644 --- a/NorthstarDedicatedTest/gameutils.cpp +++ b/NorthstarDedicatedTest/gameutils.cpp @@ -78,12 +78,32 @@ void InitialiseServerGameUtilFunctions(HMODULE baseAddress) void InitialiseTier0GameUtilFunctions(HMODULE baseAddress) { - baseAddress = GetModuleHandleA("tier0.dll"); - - CreateGlobalMemAlloc = (CreateGlobalMemAllocType)GetProcAddress(baseAddress, "CreateGlobalMemAlloc"); - g_pMemAllocSingleton = CreateGlobalMemAlloc(); - - Error = (ErrorType)GetProcAddress(baseAddress, "Error"); - CommandLine = (CommandLineType)GetProcAddress(baseAddress, "CommandLine"); - Plat_FloatTime = (Plat_FloatTimeType)GetProcAddress(baseAddress, "Plat_FloatTime"); + if (!baseAddress) + { + spdlog::critical("tier0 base address is null, but it should be already loaded"); + throw "tier0 base address is null, but it should be already loaded"; + } + if (g_pMemAllocSingleton) + return; // seems this function was already called + CreateGlobalMemAlloc = reinterpret_cast<CreateGlobalMemAllocType>(GetProcAddress(baseAddress, "CreateGlobalMemAlloc")); + IMemAlloc** ppMemAllocSingleton = reinterpret_cast<IMemAlloc**>(GetProcAddress(baseAddress, "g_pMemAllocSingleton")); + if (!ppMemAllocSingleton) + { + spdlog::critical("Address of g_pMemAllocSingleton is a null pointer, this should never happen"); + throw "Address of g_pMemAllocSingleton is a null pointer, this should never happen"; + } + if (!*ppMemAllocSingleton) + { + g_pMemAllocSingleton = CreateGlobalMemAlloc(); + *ppMemAllocSingleton = g_pMemAllocSingleton; + spdlog::info("Created new g_pMemAllocSingleton"); + } + else + { + g_pMemAllocSingleton = *ppMemAllocSingleton; + } + + Error = reinterpret_cast<ErrorType>(GetProcAddress(baseAddress, "Error")); + CommandLine = reinterpret_cast<CommandLineType>(GetProcAddress(baseAddress, "CommandLine")); + Plat_FloatTime = reinterpret_cast<Plat_FloatTimeType>(GetProcAddress(baseAddress, "Plat_FloatTime")); }
\ No newline at end of file diff --git a/NorthstarDedicatedTest/gameutils.h b/NorthstarDedicatedTest/gameutils.h index 8def57eb..43f387d1 100644 --- a/NorthstarDedicatedTest/gameutils.h +++ b/NorthstarDedicatedTest/gameutils.h @@ -7,10 +7,19 @@ class IMemAlloc public: struct VTable { - void* unknown[1]; - void* (*Alloc)(IMemAlloc* memAlloc, size_t nSize); - void* unknown2[3]; - void (*Free)(IMemAlloc* memAlloc, void* pMem); + void* unknown[1]; // alloc debug + void* (*Alloc) (IMemAlloc* memAlloc, size_t nSize); + void* unknown2[1]; // realloc debug + void* (*Realloc)(IMemAlloc* memAlloc, void* pMem, size_t nSize); + void* unknown3[1]; // free #1 + void (*Free) (IMemAlloc* memAlloc, void* pMem); + void* unknown4[2]; // nullsubs, maybe CrtSetDbgFlag + size_t(*GetSize) (IMemAlloc* memAlloc, void* pMem); + void* unknown5[9]; // they all do literally nothing + void (*DumpStats) (IMemAlloc* memAlloc); + void (*DumpStatsFileBase) (IMemAlloc* memAlloc, const char* pchFileBase); + void* unknown6[4]; + int (*heapchk) (IMemAlloc* memAlloc); }; VTable* m_vtable; diff --git a/NorthstarDedicatedTest/hooks.cpp b/NorthstarDedicatedTest/hooks.cpp index 3de8d483..ce4d75ad 100644 --- a/NorthstarDedicatedTest/hooks.cpp +++ b/NorthstarDedicatedTest/hooks.cpp @@ -1,19 +1,36 @@ #include "pch.h" #include "hooks.h" #include "hookutils.h" +#include "sigscanning.h" #include <wchar.h> #include <iostream> #include <vector> +#include <fstream> +#include <sstream> +#include <filesystem> +#include <Psapi.h> + +typedef LPSTR(*GetCommandLineAType)(); +LPSTR GetCommandLineAHook(); typedef HMODULE(*LoadLibraryExAType)(LPCSTR lpLibFileName, HANDLE hFile, DWORD dwFlags); HMODULE LoadLibraryExAHook(LPCSTR lpLibFileName, HANDLE hFile, DWORD dwFlags); +typedef HMODULE(*LoadLibraryAType)(LPCSTR lpLibFileName); +HMODULE LoadLibraryAHook(LPCSTR lpLibFileName); + typedef HMODULE(*LoadLibraryExWType)(LPCWSTR lpLibFileName, HANDLE hFile, DWORD dwFlags); HMODULE LoadLibraryExWHook(LPCWSTR lpLibFileName, HANDLE hFile, DWORD dwFlags); +typedef HMODULE(*LoadLibraryWType)(LPCWSTR lpLibFileName); +HMODULE LoadLibraryWHook(LPCWSTR lpLibFileName); + +GetCommandLineAType GetCommandLineAOriginal; LoadLibraryExAType LoadLibraryExAOriginal; +LoadLibraryAType LoadLibraryAOriginal; LoadLibraryExWType LoadLibraryExWOriginal; +LoadLibraryWType LoadLibraryWOriginal; void InstallInitialHooks() { @@ -21,8 +38,57 @@ void InstallInitialHooks() spdlog::error("MH_Initialize failed"); HookEnabler hook; + ENABLER_CREATEHOOK(hook, &GetCommandLineA, &GetCommandLineAHook, reinterpret_cast<LPVOID*>(&GetCommandLineAOriginal)); ENABLER_CREATEHOOK(hook, &LoadLibraryExA, &LoadLibraryExAHook, reinterpret_cast<LPVOID*>(&LoadLibraryExAOriginal)); + ENABLER_CREATEHOOK(hook, &LoadLibraryA, &LoadLibraryAHook, reinterpret_cast<LPVOID*>(&LoadLibraryAOriginal)); ENABLER_CREATEHOOK(hook, &LoadLibraryExW, &LoadLibraryExWHook, reinterpret_cast<LPVOID*>(&LoadLibraryExWOriginal)); + ENABLER_CREATEHOOK(hook, &LoadLibraryW, &LoadLibraryWHook, reinterpret_cast<LPVOID*>(&LoadLibraryWOriginal)); +} + +LPSTR GetCommandLineAHook() +{ + static char* cmdlineModified; + static char* cmdlineOrg; + + if (cmdlineOrg == nullptr || cmdlineModified == nullptr) + { + cmdlineOrg = GetCommandLineAOriginal(); + bool isDedi = strstr(cmdlineOrg, "-dedicated"); // well, this one has to be a real argument + + std::string args; + std::ifstream cmdlineArgFile; + + // it looks like CommandLine() prioritizes parameters apprearing first, so we want the real commandline to take priority + // not to mention that cmdlineOrg starts with the EXE path + args.append(cmdlineOrg); + args.append(" "); + + // append those from the file + + cmdlineArgFile = std::ifstream(!isDedi ? "ns_startup_args.txt" : "ns_startup_args_dedi.txt"); + + if (cmdlineArgFile) + { + std::stringstream argBuffer; + argBuffer << cmdlineArgFile.rdbuf(); + cmdlineArgFile.close(); + + args.append(argBuffer.str()); + } + + auto len = args.length(); + cmdlineModified = new char[len + 1]; + if (!cmdlineModified) + { + spdlog::error("malloc failed for command line"); + return cmdlineOrg; + } + memcpy(cmdlineModified, args.c_str(), len + 1); + + spdlog::info("Command line: {}", cmdlineModified); + } + + return cmdlineModified; } // dll load callback stuff @@ -46,21 +112,75 @@ void AddDllLoadCallback(std::string dll, DllLoadCallbackFuncType callback) dllLoadCallbacks.push_back(callbackStruct); } -HMODULE LoadLibraryExAHook(LPCSTR lpLibFileName, HANDLE hFile, DWORD dwFlags) +void CallLoadLibraryACallbacks(LPCSTR lpLibFileName, HMODULE moduleAddress) { - HMODULE moduleAddress = LoadLibraryExAOriginal(lpLibFileName, hFile, dwFlags); - - if (moduleAddress) + for (auto& callbackStruct : dllLoadCallbacks) + { + if (!callbackStruct->called && strstr(lpLibFileName + (strlen(lpLibFileName) - callbackStruct->dll.length()), callbackStruct->dll.c_str()) != nullptr) + { + callbackStruct->callback(moduleAddress); + callbackStruct->called = true; + } + } +} + +void CallLoadLibraryWCallbacks(LPCWSTR lpLibFileName, HMODULE moduleAddress) +{ + for (auto& callbackStruct : dllLoadCallbacks) + { + std::wstring wcharStrDll = std::wstring(callbackStruct->dll.begin(), callbackStruct->dll.end()); + const wchar_t* callbackDll = wcharStrDll.c_str(); + if (!callbackStruct->called && wcsstr(lpLibFileName + (wcslen(lpLibFileName) - wcharStrDll.length()), callbackDll) != nullptr) + { + callbackStruct->callback(moduleAddress); + callbackStruct->called = true; + } + } +} + +void CallAllPendingDLLLoadCallbacks() +{ + HMODULE hMods[1024]; + HANDLE hProcess = GetCurrentProcess(); + DWORD cbNeeded; + unsigned int i; + + // Get a list of all the modules in this process. + if (EnumProcessModules(hProcess, hMods, sizeof(hMods), &cbNeeded)) { - for (auto& callbackStruct : dllLoadCallbacks) + for (i = 0; i < (cbNeeded / sizeof(HMODULE)); i++) { - if (!callbackStruct->called && strstr(lpLibFileName + (strlen(lpLibFileName) - strlen(callbackStruct->dll.c_str())), callbackStruct->dll.c_str()) != nullptr) + wchar_t szModName[MAX_PATH]; + + // Get the full path to the module's file. + if (GetModuleFileNameExW(hProcess, hMods[i], szModName, sizeof(szModName) / sizeof(TCHAR))) { - callbackStruct->callback(moduleAddress); - callbackStruct->called = true; + CallLoadLibraryWCallbacks(szModName, hMods[i]); } } } +} + +HMODULE LoadLibraryExAHook(LPCSTR lpLibFileName, HANDLE hFile, DWORD dwFlags) +{ + HMODULE moduleAddress = LoadLibraryExAOriginal(lpLibFileName, hFile, dwFlags); + + if (moduleAddress) + { + CallLoadLibraryACallbacks(lpLibFileName, moduleAddress); + } + + return moduleAddress; +} + +HMODULE LoadLibraryAHook(LPCSTR lpLibFileName) +{ + HMODULE moduleAddress = LoadLibraryAOriginal(lpLibFileName); + + if (moduleAddress) + { + CallLoadLibraryACallbacks(lpLibFileName, moduleAddress); + } return moduleAddress; } @@ -71,16 +191,19 @@ HMODULE LoadLibraryExWHook(LPCWSTR lpLibFileName, HANDLE hFile, DWORD dwFlags) if (moduleAddress) { - for (auto& callbackStruct : dllLoadCallbacks) - { - std::wstring wcharStrDll = std::wstring(callbackStruct->dll.begin(), callbackStruct->dll.end()); - const wchar_t* callbackDll = wcharStrDll.c_str(); - if (!callbackStruct->called && wcsstr(lpLibFileName + (wcslen(lpLibFileName) - wcslen(callbackDll)), callbackDll) != nullptr) - { - callbackStruct->callback(moduleAddress); - callbackStruct->called = true; - } - } + CallLoadLibraryWCallbacks(lpLibFileName, moduleAddress); + } + + return moduleAddress; +} + +HMODULE LoadLibraryWHook(LPCWSTR lpLibFileName) +{ + HMODULE moduleAddress = LoadLibraryWOriginal(lpLibFileName); + + if (moduleAddress) + { + CallLoadLibraryWCallbacks(lpLibFileName, moduleAddress); } return moduleAddress; diff --git a/NorthstarDedicatedTest/hooks.h b/NorthstarDedicatedTest/hooks.h index 972b38a6..10e4d4ba 100644 --- a/NorthstarDedicatedTest/hooks.h +++ b/NorthstarDedicatedTest/hooks.h @@ -4,4 +4,6 @@ void InstallInitialHooks(); typedef void(*DllLoadCallbackFuncType)(HMODULE moduleAddress); -void AddDllLoadCallback(std::string dll, DllLoadCallbackFuncType callback);
\ No newline at end of file +void AddDllLoadCallback(std::string dll, DllLoadCallbackFuncType callback); + +void CallAllPendingDLLLoadCallbacks();
\ No newline at end of file diff --git a/NorthstarDedicatedTest/hookutils.cpp b/NorthstarDedicatedTest/hookutils.cpp index e86c671c..8ab24a3b 100644 --- a/NorthstarDedicatedTest/hookutils.cpp +++ b/NorthstarDedicatedTest/hookutils.cpp @@ -38,7 +38,7 @@ void HookEnabler::CreateHook(LPVOID ppTarget, LPVOID ppDetour, LPVOID* ppOrigina else { if (targetName != nullptr) - spdlog::error("MH_CreateHook failed for function %s", targetName); + spdlog::error("MH_CreateHook failed for function {}", targetName); else spdlog::error("MH_CreateHook failed for unknown function"); } @@ -51,7 +51,7 @@ HookEnabler::~HookEnabler() if (MH_EnableHook(hook->targetAddress) != MH_OK) { if (hook->targetName != nullptr) - spdlog::error("MH_EnableHook failed for function %s", hook->targetName); + spdlog::error("MH_EnableHook failed for function {}", hook->targetName); else spdlog::error("MH_EnableHook failed for unknown function"); } diff --git a/NorthstarDedicatedTest/include/MinHook.x64.dll b/NorthstarDedicatedTest/include/MinHook.x64.dll Binary files differdeleted file mode 100644 index b4f51c2e..00000000 --- a/NorthstarDedicatedTest/include/MinHook.x64.dll +++ /dev/null diff --git a/NorthstarDedicatedTest/include/MinHook.x64.lib b/NorthstarDedicatedTest/include/MinHook.x64.lib Binary files differindex 909fe682..213df08f 100644 --- a/NorthstarDedicatedTest/include/MinHook.x64.lib +++ b/NorthstarDedicatedTest/include/MinHook.x64.lib diff --git a/NorthstarDedicatedTest/include/libcurl/include/curl/curl.h b/NorthstarDedicatedTest/include/libcurl/include/curl/curl.h new file mode 100644 index 00000000..7b69ce2d --- /dev/null +++ b/NorthstarDedicatedTest/include/libcurl/include/curl/curl.h @@ -0,0 +1,3103 @@ +#ifndef CURLINC_CURL_H +#define CURLINC_CURL_H +/*************************************************************************** + * _ _ ____ _ + * Project ___| | | | _ \| | + * / __| | | | |_) | | + * | (__| |_| | _ <| |___ + * \___|\___/|_| \_\_____| + * + * Copyright (C) 1998 - 2021, Daniel Stenberg, <daniel@haxx.se>, et al. + * + * This software is licensed as described in the file COPYING, which + * you should have received as part of this distribution. The terms + * are also available at https://curl.se/docs/copyright.html. + * + * You may opt to use, copy, modify, merge, publish, distribute and/or sell + * copies of the Software, and permit persons to whom the Software is + * furnished to do so, under the terms of the COPYING file. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + ***************************************************************************/ + +/* + * If you have libcurl problems, all docs and details are found here: + * https://curl.se/libcurl/ + */ + +#ifdef CURL_NO_OLDIES +#define CURL_STRICTER +#endif + +#include "curlver.h" /* libcurl version defines */ +#include "system.h" /* determine things run-time */ + +/* + * Define CURL_WIN32 when build target is Win32 API + */ + +#if (defined(_WIN32) || defined(__WIN32__) || defined(WIN32)) && \ + !defined(__SYMBIAN32__) +#define CURL_WIN32 +#endif + +#include <stdio.h> +#include <limits.h> + +#if (defined(__FreeBSD__) && (__FreeBSD__ >= 2)) || defined(__MidnightBSD__) +/* Needed for __FreeBSD_version or __MidnightBSD_version symbol definition */ +#include <osreldate.h> +#endif + +/* The include stuff here below is mainly for time_t! */ +#include <sys/types.h> +#include <time.h> + +#if defined(CURL_WIN32) && !defined(_WIN32_WCE) && !defined(__CYGWIN__) +#if !(defined(_WINSOCKAPI_) || defined(_WINSOCK_H) || \ + defined(__LWIP_OPT_H__) || defined(LWIP_HDR_OPT_H)) +/* The check above prevents the winsock2 inclusion if winsock.h already was + included, since they can't co-exist without problems */ +#include <winsock2.h> +#include <ws2tcpip.h> +#endif +#endif + +/* HP-UX systems version 9, 10 and 11 lack sys/select.h and so does oldish + libc5-based Linux systems. Only include it on systems that are known to + require it! */ +#if defined(_AIX) || defined(__NOVELL_LIBC__) || defined(__NetBSD__) || \ + defined(__minix) || defined(__SYMBIAN32__) || defined(__INTEGRITY) || \ + defined(ANDROID) || defined(__ANDROID__) || defined(__OpenBSD__) || \ + defined(__CYGWIN__) || defined(AMIGA) || defined(__NuttX__) || \ + (defined(__FreeBSD_version) && (__FreeBSD_version < 800000)) || \ + (defined(__MidnightBSD_version) && (__MidnightBSD_version < 100000)) || \ + defined(__VXWORKS__) +#include <sys/select.h> +#endif + +#if !defined(CURL_WIN32) && !defined(_WIN32_WCE) +#include <sys/socket.h> +#endif + +#if !defined(CURL_WIN32) && !defined(__WATCOMC__) && !defined(__VXWORKS__) +#include <sys/time.h> +#endif + +#ifdef __BEOS__ +#include <support/SupportDefs.h> +#endif + +/* Compatibility for non-Clang compilers */ +#ifndef __has_declspec_attribute +# define __has_declspec_attribute(x) 0 +#endif + +#ifdef __cplusplus +extern "C" { +#endif + +#if defined(BUILDING_LIBCURL) || defined(CURL_STRICTER) +typedef struct Curl_easy CURL; +typedef struct Curl_share CURLSH; +#else +typedef void CURL; +typedef void CURLSH; +#endif + +/* + * libcurl external API function linkage decorations. + */ + +#ifdef CURL_STATICLIB +# define CURL_EXTERN +#elif defined(CURL_WIN32) || defined(__SYMBIAN32__) || \ + (__has_declspec_attribute(dllexport) && \ + __has_declspec_attribute(dllimport)) +# if defined(BUILDING_LIBCURL) +# define CURL_EXTERN __declspec(dllexport) +# else +# define CURL_EXTERN __declspec(dllimport) +# endif +#elif defined(BUILDING_LIBCURL) && defined(CURL_HIDDEN_SYMBOLS) +# define CURL_EXTERN CURL_EXTERN_SYMBOL +#else +# define CURL_EXTERN +#endif + +#ifndef curl_socket_typedef +/* socket typedef */ +#if defined(CURL_WIN32) && !defined(__LWIP_OPT_H__) && !defined(LWIP_HDR_OPT_H) +typedef SOCKET curl_socket_t; +#define CURL_SOCKET_BAD INVALID_SOCKET +#else +typedef int curl_socket_t; +#define CURL_SOCKET_BAD -1 +#endif +#define curl_socket_typedef +#endif /* curl_socket_typedef */ + +/* enum for the different supported SSL backends */ +typedef enum { + CURLSSLBACKEND_NONE = 0, + CURLSSLBACKEND_OPENSSL = 1, + CURLSSLBACKEND_GNUTLS = 2, + CURLSSLBACKEND_NSS = 3, + CURLSSLBACKEND_OBSOLETE4 = 4, /* Was QSOSSL. */ + CURLSSLBACKEND_GSKIT = 5, + CURLSSLBACKEND_POLARSSL = 6, + CURLSSLBACKEND_WOLFSSL = 7, + CURLSSLBACKEND_SCHANNEL = 8, + CURLSSLBACKEND_SECURETRANSPORT = 9, + CURLSSLBACKEND_AXTLS = 10, /* never used since 7.63.0 */ + CURLSSLBACKEND_MBEDTLS = 11, + CURLSSLBACKEND_MESALINK = 12, + CURLSSLBACKEND_BEARSSL = 13, + CURLSSLBACKEND_RUSTLS = 14 +} curl_sslbackend; + +/* aliases for library clones and renames */ +#define CURLSSLBACKEND_LIBRESSL CURLSSLBACKEND_OPENSSL +#define CURLSSLBACKEND_BORINGSSL CURLSSLBACKEND_OPENSSL + +/* deprecated names: */ +#define CURLSSLBACKEND_CYASSL CURLSSLBACKEND_WOLFSSL +#define CURLSSLBACKEND_DARWINSSL CURLSSLBACKEND_SECURETRANSPORT + +struct curl_httppost { + struct curl_httppost *next; /* next entry in the list */ + char *name; /* pointer to allocated name */ + long namelength; /* length of name length */ + char *contents; /* pointer to allocated data contents */ + long contentslength; /* length of contents field, see also + CURL_HTTPPOST_LARGE */ + char *buffer; /* pointer to allocated buffer contents */ + long bufferlength; /* length of buffer field */ + char *contenttype; /* Content-Type */ + struct curl_slist *contentheader; /* list of extra headers for this form */ + struct curl_httppost *more; /* if one field name has more than one + file, this link should link to following + files */ + long flags; /* as defined below */ + +/* specified content is a file name */ +#define CURL_HTTPPOST_FILENAME (1<<0) +/* specified content is a file name */ +#define CURL_HTTPPOST_READFILE (1<<1) +/* name is only stored pointer do not free in formfree */ +#define CURL_HTTPPOST_PTRNAME (1<<2) +/* contents is only stored pointer do not free in formfree */ +#define CURL_HTTPPOST_PTRCONTENTS (1<<3) +/* upload file from buffer */ +#define CURL_HTTPPOST_BUFFER (1<<4) +/* upload file from pointer contents */ +#define CURL_HTTPPOST_PTRBUFFER (1<<5) +/* upload file contents by using the regular read callback to get the data and + pass the given pointer as custom pointer */ +#define CURL_HTTPPOST_CALLBACK (1<<6) +/* use size in 'contentlen', added in 7.46.0 */ +#define CURL_HTTPPOST_LARGE (1<<7) + + char *showfilename; /* The file name to show. If not set, the + actual file name will be used (if this + is a file part) */ + void *userp; /* custom pointer used for + HTTPPOST_CALLBACK posts */ + curl_off_t contentlen; /* alternative length of contents + field. Used if CURL_HTTPPOST_LARGE is + set. Added in 7.46.0 */ +}; + + +/* This is a return code for the progress callback that, when returned, will + signal libcurl to continue executing the default progress function */ +#define CURL_PROGRESSFUNC_CONTINUE 0x10000001 + +/* This is the CURLOPT_PROGRESSFUNCTION callback prototype. It is now + considered deprecated but was the only choice up until 7.31.0 */ +typedef int (*curl_progress_callback)(void *clientp, + double dltotal, + double dlnow, + double ultotal, + double ulnow); + +/* This is the CURLOPT_XFERINFOFUNCTION callback prototype. It was introduced + in 7.32.0, avoids the use of floating point numbers and provides more + detailed information. */ +typedef int (*curl_xferinfo_callback)(void *clientp, + curl_off_t dltotal, + curl_off_t dlnow, + curl_off_t ultotal, + curl_off_t ulnow); + +#ifndef CURL_MAX_READ_SIZE + /* The maximum receive buffer size configurable via CURLOPT_BUFFERSIZE. */ +#define CURL_MAX_READ_SIZE 524288 +#endif + +#ifndef CURL_MAX_WRITE_SIZE + /* Tests have proven that 20K is a very bad buffer size for uploads on + Windows, while 16K for some odd reason performed a lot better. + We do the ifndef check to allow this value to easier be changed at build + time for those who feel adventurous. The practical minimum is about + 400 bytes since libcurl uses a buffer of this size as a scratch area + (unrelated to network send operations). */ +#define CURL_MAX_WRITE_SIZE 16384 +#endif + +#ifndef CURL_MAX_HTTP_HEADER +/* The only reason to have a max limit for this is to avoid the risk of a bad + server feeding libcurl with a never-ending header that will cause reallocs + infinitely */ +#define CURL_MAX_HTTP_HEADER (100*1024) +#endif + +/* This is a magic return code for the write callback that, when returned, + will signal libcurl to pause receiving on the current transfer. */ +#define CURL_WRITEFUNC_PAUSE 0x10000001 + +typedef size_t (*curl_write_callback)(char *buffer, + size_t size, + size_t nitems, + void *outstream); + +/* This callback will be called when a new resolver request is made */ +typedef int (*curl_resolver_start_callback)(void *resolver_state, + void *reserved, void *userdata); + +/* enumeration of file types */ +typedef enum { + CURLFILETYPE_FILE = 0, + CURLFILETYPE_DIRECTORY, + CURLFILETYPE_SYMLINK, + CURLFILETYPE_DEVICE_BLOCK, + CURLFILETYPE_DEVICE_CHAR, + CURLFILETYPE_NAMEDPIPE, + CURLFILETYPE_SOCKET, + CURLFILETYPE_DOOR, /* is possible only on Sun Solaris now */ + + CURLFILETYPE_UNKNOWN /* should never occur */ +} curlfiletype; + +#define CURLFINFOFLAG_KNOWN_FILENAME (1<<0) +#define CURLFINFOFLAG_KNOWN_FILETYPE (1<<1) +#define CURLFINFOFLAG_KNOWN_TIME (1<<2) +#define CURLFINFOFLAG_KNOWN_PERM (1<<3) +#define CURLFINFOFLAG_KNOWN_UID (1<<4) +#define CURLFINFOFLAG_KNOWN_GID (1<<5) +#define CURLFINFOFLAG_KNOWN_SIZE (1<<6) +#define CURLFINFOFLAG_KNOWN_HLINKCOUNT (1<<7) + +/* Information about a single file, used when doing FTP wildcard matching */ +struct curl_fileinfo { + char *filename; + curlfiletype filetype; + time_t time; /* always zero! */ + unsigned int perm; + int uid; + int gid; + curl_off_t size; + long int hardlinks; + + struct { + /* If some of these fields is not NULL, it is a pointer to b_data. */ + char *time; + char *perm; + char *user; + char *group; + char *target; /* pointer to the target filename of a symlink */ + } strings; + + unsigned int flags; + + /* used internally */ + char *b_data; + size_t b_size; + size_t b_used; +}; + +/* return codes for CURLOPT_CHUNK_BGN_FUNCTION */ +#define CURL_CHUNK_BGN_FUNC_OK 0 +#define CURL_CHUNK_BGN_FUNC_FAIL 1 /* tell the lib to end the task */ +#define CURL_CHUNK_BGN_FUNC_SKIP 2 /* skip this chunk over */ + +/* if splitting of data transfer is enabled, this callback is called before + download of an individual chunk started. Note that parameter "remains" works + only for FTP wildcard downloading (for now), otherwise is not used */ +typedef long (*curl_chunk_bgn_callback)(const void *transfer_info, + void *ptr, + int remains); + +/* return codes for CURLOPT_CHUNK_END_FUNCTION */ +#define CURL_CHUNK_END_FUNC_OK 0 +#define CURL_CHUNK_END_FUNC_FAIL 1 /* tell the lib to end the task */ + +/* If splitting of data transfer is enabled this callback is called after + download of an individual chunk finished. + Note! After this callback was set then it have to be called FOR ALL chunks. + Even if downloading of this chunk was skipped in CHUNK_BGN_FUNC. + This is the reason why we don't need "transfer_info" parameter in this + callback and we are not interested in "remains" parameter too. */ +typedef long (*curl_chunk_end_callback)(void *ptr); + +/* return codes for FNMATCHFUNCTION */ +#define CURL_FNMATCHFUNC_MATCH 0 /* string corresponds to the pattern */ +#define CURL_FNMATCHFUNC_NOMATCH 1 /* pattern doesn't match the string */ +#define CURL_FNMATCHFUNC_FAIL 2 /* an error occurred */ + +/* callback type for wildcard downloading pattern matching. If the + string matches the pattern, return CURL_FNMATCHFUNC_MATCH value, etc. */ +typedef int (*curl_fnmatch_callback)(void *ptr, + const char *pattern, + const char *string); + +/* These are the return codes for the seek callbacks */ +#define CURL_SEEKFUNC_OK 0 +#define CURL_SEEKFUNC_FAIL 1 /* fail the entire transfer */ +#define CURL_SEEKFUNC_CANTSEEK 2 /* tell libcurl seeking can't be done, so + libcurl might try other means instead */ +typedef int (*curl_seek_callback)(void *instream, + curl_off_t offset, + int origin); /* 'whence' */ + +/* This is a return code for the read callback that, when returned, will + signal libcurl to immediately abort the current transfer. */ +#define CURL_READFUNC_ABORT 0x10000000 +/* This is a return code for the read callback that, when returned, will + signal libcurl to pause sending data on the current transfer. */ +#define CURL_READFUNC_PAUSE 0x10000001 + +/* Return code for when the trailing headers' callback has terminated + without any errors*/ +#define CURL_TRAILERFUNC_OK 0 +/* Return code for when was an error in the trailing header's list and we + want to abort the request */ +#define CURL_TRAILERFUNC_ABORT 1 + +typedef size_t (*curl_read_callback)(char *buffer, + size_t size, + size_t nitems, + void *instream); + +typedef int (*curl_trailer_callback)(struct curl_slist **list, + void *userdata); + +typedef enum { + CURLSOCKTYPE_IPCXN, /* socket created for a specific IP connection */ + CURLSOCKTYPE_ACCEPT, /* socket created by accept() call */ + CURLSOCKTYPE_LAST /* never use */ +} curlsocktype; + +/* The return code from the sockopt_callback can signal information back + to libcurl: */ +#define CURL_SOCKOPT_OK 0 +#define CURL_SOCKOPT_ERROR 1 /* causes libcurl to abort and return + CURLE_ABORTED_BY_CALLBACK */ +#define CURL_SOCKOPT_ALREADY_CONNECTED 2 + +typedef int (*curl_sockopt_callback)(void *clientp, + curl_socket_t curlfd, + curlsocktype purpose); + +struct curl_sockaddr { + int family; + int socktype; + int protocol; + unsigned int addrlen; /* addrlen was a socklen_t type before 7.18.0 but it + turned really ugly and painful on the systems that + lack this type */ + struct sockaddr addr; +}; + +typedef curl_socket_t +(*curl_opensocket_callback)(void *clientp, + curlsocktype purpose, + struct curl_sockaddr *address); + +typedef int +(*curl_closesocket_callback)(void *clientp, curl_socket_t item); + +typedef enum { + CURLIOE_OK, /* I/O operation successful */ + CURLIOE_UNKNOWNCMD, /* command was unknown to callback */ + CURLIOE_FAILRESTART, /* failed to restart the read */ + CURLIOE_LAST /* never use */ +} curlioerr; + +typedef enum { + CURLIOCMD_NOP, /* no operation */ + CURLIOCMD_RESTARTREAD, /* restart the read stream from start */ + CURLIOCMD_LAST /* never use */ +} curliocmd; + +typedef curlioerr (*curl_ioctl_callback)(CURL *handle, + int cmd, + void *clientp); + +#ifndef CURL_DID_MEMORY_FUNC_TYPEDEFS +/* + * The following typedef's are signatures of malloc, free, realloc, strdup and + * calloc respectively. Function pointers of these types can be passed to the + * curl_global_init_mem() function to set user defined memory management + * callback routines. + */ +typedef void *(*curl_malloc_callback)(size_t size); +typedef void (*curl_free_callback)(void *ptr); +typedef void *(*curl_realloc_callback)(void *ptr, size_t size); +typedef char *(*curl_strdup_callback)(const char *str); +typedef void *(*curl_calloc_callback)(size_t nmemb, size_t size); + +#define CURL_DID_MEMORY_FUNC_TYPEDEFS +#endif + +/* the kind of data that is passed to information_callback*/ +typedef enum { + CURLINFO_TEXT = 0, + CURLINFO_HEADER_IN, /* 1 */ + CURLINFO_HEADER_OUT, /* 2 */ + CURLINFO_DATA_IN, /* 3 */ + CURLINFO_DATA_OUT, /* 4 */ + CURLINFO_SSL_DATA_IN, /* 5 */ + CURLINFO_SSL_DATA_OUT, /* 6 */ + CURLINFO_END +} curl_infotype; + +typedef int (*curl_debug_callback) + (CURL *handle, /* the handle/transfer this concerns */ + curl_infotype type, /* what kind of data */ + char *data, /* points to the data */ + size_t size, /* size of the data pointed to */ + void *userptr); /* whatever the user please */ + +/* This is the CURLOPT_PREREQFUNCTION callback prototype. */ +typedef int (*curl_prereq_callback)(void *clientp, + char *conn_primary_ip, + char *conn_local_ip, + int conn_primary_port, + int conn_local_port); + +/* Return code for when the pre-request callback has terminated without + any errors */ +#define CURL_PREREQFUNC_OK 0 +/* Return code for when the pre-request callback wants to abort the + request */ +#define CURL_PREREQFUNC_ABORT 1 + +/* All possible error codes from all sorts of curl functions. Future versions + may return other values, stay prepared. + + Always add new return codes last. Never *EVER* remove any. The return + codes must remain the same! + */ + +typedef enum { + CURLE_OK = 0, + CURLE_UNSUPPORTED_PROTOCOL, /* 1 */ + CURLE_FAILED_INIT, /* 2 */ + CURLE_URL_MALFORMAT, /* 3 */ + CURLE_NOT_BUILT_IN, /* 4 - [was obsoleted in August 2007 for + 7.17.0, reused in April 2011 for 7.21.5] */ + CURLE_COULDNT_RESOLVE_PROXY, /* 5 */ + CURLE_COULDNT_RESOLVE_HOST, /* 6 */ + CURLE_COULDNT_CONNECT, /* 7 */ + CURLE_WEIRD_SERVER_REPLY, /* 8 */ + CURLE_REMOTE_ACCESS_DENIED, /* 9 a service was denied by the server + due to lack of access - when login fails + this is not returned. */ + CURLE_FTP_ACCEPT_FAILED, /* 10 - [was obsoleted in April 2006 for + 7.15.4, reused in Dec 2011 for 7.24.0]*/ + CURLE_FTP_WEIRD_PASS_REPLY, /* 11 */ + CURLE_FTP_ACCEPT_TIMEOUT, /* 12 - timeout occurred accepting server + [was obsoleted in August 2007 for 7.17.0, + reused in Dec 2011 for 7.24.0]*/ + CURLE_FTP_WEIRD_PASV_REPLY, /* 13 */ + CURLE_FTP_WEIRD_227_FORMAT, /* 14 */ + CURLE_FTP_CANT_GET_HOST, /* 15 */ + CURLE_HTTP2, /* 16 - A problem in the http2 framing layer. + [was obsoleted in August 2007 for 7.17.0, + reused in July 2014 for 7.38.0] */ + CURLE_FTP_COULDNT_SET_TYPE, /* 17 */ + CURLE_PARTIAL_FILE, /* 18 */ + CURLE_FTP_COULDNT_RETR_FILE, /* 19 */ + CURLE_OBSOLETE20, /* 20 - NOT USED */ + CURLE_QUOTE_ERROR, /* 21 - quote command failure */ + CURLE_HTTP_RETURNED_ERROR, /* 22 */ + CURLE_WRITE_ERROR, /* 23 */ + CURLE_OBSOLETE24, /* 24 - NOT USED */ + CURLE_UPLOAD_FAILED, /* 25 - failed upload "command" */ + CURLE_READ_ERROR, /* 26 - couldn't open/read from file */ + CURLE_OUT_OF_MEMORY, /* 27 */ + /* Note: CURLE_OUT_OF_MEMORY may sometimes indicate a conversion error + instead of a memory allocation error if CURL_DOES_CONVERSIONS + is defined + */ + CURLE_OPERATION_TIMEDOUT, /* 28 - the timeout time was reached */ + CURLE_OBSOLETE29, /* 29 - NOT USED */ + CURLE_FTP_PORT_FAILED, /* 30 - FTP PORT operation failed */ + CURLE_FTP_COULDNT_USE_REST, /* 31 - the REST command failed */ + CURLE_OBSOLETE32, /* 32 - NOT USED */ + CURLE_RANGE_ERROR, /* 33 - RANGE "command" didn't work */ + CURLE_HTTP_POST_ERROR, /* 34 */ + CURLE_SSL_CONNECT_ERROR, /* 35 - wrong when connecting with SSL */ + CURLE_BAD_DOWNLOAD_RESUME, /* 36 - couldn't resume download */ + CURLE_FILE_COULDNT_READ_FILE, /* 37 */ + CURLE_LDAP_CANNOT_BIND, /* 38 */ + CURLE_LDAP_SEARCH_FAILED, /* 39 */ + CURLE_OBSOLETE40, /* 40 - NOT USED */ + CURLE_FUNCTION_NOT_FOUND, /* 41 - NOT USED starting with 7.53.0 */ + CURLE_ABORTED_BY_CALLBACK, /* 42 */ + CURLE_BAD_FUNCTION_ARGUMENT, /* 43 */ + CURLE_OBSOLETE44, /* 44 - NOT USED */ + CURLE_INTERFACE_FAILED, /* 45 - CURLOPT_INTERFACE failed */ + CURLE_OBSOLETE46, /* 46 - NOT USED */ + CURLE_TOO_MANY_REDIRECTS, /* 47 - catch endless re-direct loops */ + CURLE_UNKNOWN_OPTION, /* 48 - User specified an unknown option */ + CURLE_SETOPT_OPTION_SYNTAX, /* 49 - Malformed setopt option */ + CURLE_OBSOLETE50, /* 50 - NOT USED */ + CURLE_OBSOLETE51, /* 51 - NOT USED */ + CURLE_GOT_NOTHING, /* 52 - when this is a specific error */ + CURLE_SSL_ENGINE_NOTFOUND, /* 53 - SSL crypto engine not found */ + CURLE_SSL_ENGINE_SETFAILED, /* 54 - can not set SSL crypto engine as + default */ + CURLE_SEND_ERROR, /* 55 - failed sending network data */ + CURLE_RECV_ERROR, /* 56 - failure in receiving network data */ + CURLE_OBSOLETE57, /* 57 - NOT IN USE */ + CURLE_SSL_CERTPROBLEM, /* 58 - problem with the local certificate */ + CURLE_SSL_CIPHER, /* 59 - couldn't use specified cipher */ + CURLE_PEER_FAILED_VERIFICATION, /* 60 - peer's certificate or fingerprint + wasn't verified fine */ + CURLE_BAD_CONTENT_ENCODING, /* 61 - Unrecognized/bad encoding */ + CURLE_LDAP_INVALID_URL, /* 62 - Invalid LDAP URL */ + CURLE_FILESIZE_EXCEEDED, /* 63 - Maximum file size exceeded */ + CURLE_USE_SSL_FAILED, /* 64 - Requested FTP SSL level failed */ + CURLE_SEND_FAIL_REWIND, /* 65 - Sending the data requires a rewind + that failed */ + CURLE_SSL_ENGINE_INITFAILED, /* 66 - failed to initialise ENGINE */ + CURLE_LOGIN_DENIED, /* 67 - user, password or similar was not + accepted and we failed to login */ + CURLE_TFTP_NOTFOUND, /* 68 - file not found on server */ + CURLE_TFTP_PERM, /* 69 - permission problem on server */ + CURLE_REMOTE_DISK_FULL, /* 70 - out of disk space on server */ + CURLE_TFTP_ILLEGAL, /* 71 - Illegal TFTP operation */ + CURLE_TFTP_UNKNOWNID, /* 72 - Unknown transfer ID */ + CURLE_REMOTE_FILE_EXISTS, /* 73 - File already exists */ + CURLE_TFTP_NOSUCHUSER, /* 74 - No such user */ + CURLE_CONV_FAILED, /* 75 - conversion failed */ + CURLE_CONV_REQD, /* 76 - caller must register conversion + callbacks using curl_easy_setopt options + CURLOPT_CONV_FROM_NETWORK_FUNCTION, + CURLOPT_CONV_TO_NETWORK_FUNCTION, and + CURLOPT_CONV_FROM_UTF8_FUNCTION */ + CURLE_SSL_CACERT_BADFILE, /* 77 - could not load CACERT file, missing + or wrong format */ + CURLE_REMOTE_FILE_NOT_FOUND, /* 78 - remote file not found */ + CURLE_SSH, /* 79 - error from the SSH layer, somewhat + generic so the error message will be of + interest when this has happened */ + + CURLE_SSL_SHUTDOWN_FAILED, /* 80 - Failed to shut down the SSL + connection */ + CURLE_AGAIN, /* 81 - socket is not ready for send/recv, + wait till it's ready and try again (Added + in 7.18.2) */ + CURLE_SSL_CRL_BADFILE, /* 82 - could not load CRL file, missing or + wrong format (Added in 7.19.0) */ + CURLE_SSL_ISSUER_ERROR, /* 83 - Issuer check failed. (Added in + 7.19.0) */ + CURLE_FTP_PRET_FAILED, /* 84 - a PRET command failed */ + CURLE_RTSP_CSEQ_ERROR, /* 85 - mismatch of RTSP CSeq numbers */ + CURLE_RTSP_SESSION_ERROR, /* 86 - mismatch of RTSP Session Ids */ + CURLE_FTP_BAD_FILE_LIST, /* 87 - unable to parse FTP file list */ + CURLE_CHUNK_FAILED, /* 88 - chunk callback reported error */ + CURLE_NO_CONNECTION_AVAILABLE, /* 89 - No connection available, the + session will be queued */ + CURLE_SSL_PINNEDPUBKEYNOTMATCH, /* 90 - specified pinned public key did not + match */ + CURLE_SSL_INVALIDCERTSTATUS, /* 91 - invalid certificate status */ + CURLE_HTTP2_STREAM, /* 92 - stream error in HTTP/2 framing layer + */ + CURLE_RECURSIVE_API_CALL, /* 93 - an api function was called from + inside a callback */ + CURLE_AUTH_ERROR, /* 94 - an authentication function returned an + error */ + CURLE_HTTP3, /* 95 - An HTTP/3 layer problem */ + CURLE_QUIC_CONNECT_ERROR, /* 96 - QUIC connection error */ + CURLE_PROXY, /* 97 - proxy handshake error */ + CURLE_SSL_CLIENTCERT, /* 98 - client-side certificate required */ + CURL_LAST /* never use! */ +} CURLcode; + +#ifndef CURL_NO_OLDIES /* define this to test if your app builds with all + the obsolete stuff removed! */ + +/* Previously obsolete error code re-used in 7.38.0 */ +#define CURLE_OBSOLETE16 CURLE_HTTP2 + +/* Previously obsolete error codes re-used in 7.24.0 */ +#define CURLE_OBSOLETE10 CURLE_FTP_ACCEPT_FAILED +#define CURLE_OBSOLETE12 CURLE_FTP_ACCEPT_TIMEOUT + +/* compatibility with older names */ +#define CURLOPT_ENCODING CURLOPT_ACCEPT_ENCODING +#define CURLE_FTP_WEIRD_SERVER_REPLY CURLE_WEIRD_SERVER_REPLY + +/* The following were added in 7.62.0 */ +#define CURLE_SSL_CACERT CURLE_PEER_FAILED_VERIFICATION + +/* The following were added in 7.21.5, April 2011 */ +#define CURLE_UNKNOWN_TELNET_OPTION CURLE_UNKNOWN_OPTION + +/* Added for 7.78.0 */ +#define CURLE_TELNET_OPTION_SYNTAX CURLE_SETOPT_OPTION_SYNTAX + +/* The following were added in 7.17.1 */ +/* These are scheduled to disappear by 2009 */ +#define CURLE_SSL_PEER_CERTIFICATE CURLE_PEER_FAILED_VERIFICATION + +/* The following were added in 7.17.0 */ +/* These are scheduled to disappear by 2009 */ +#define CURLE_OBSOLETE CURLE_OBSOLETE50 /* no one should be using this! */ +#define CURLE_BAD_PASSWORD_ENTERED CURLE_OBSOLETE46 +#define CURLE_BAD_CALLING_ORDER CURLE_OBSOLETE44 +#define CURLE_FTP_USER_PASSWORD_INCORRECT CURLE_OBSOLETE10 +#define CURLE_FTP_CANT_RECONNECT CURLE_OBSOLETE16 +#define CURLE_FTP_COULDNT_GET_SIZE CURLE_OBSOLETE32 +#define CURLE_FTP_COULDNT_SET_ASCII CURLE_OBSOLETE29 +#define CURLE_FTP_WEIRD_USER_REPLY CURLE_OBSOLETE12 +#define CURLE_FTP_WRITE_ERROR CURLE_OBSOLETE20 +#define CURLE_LIBRARY_NOT_FOUND CURLE_OBSOLETE40 +#define CURLE_MALFORMAT_USER CURLE_OBSOLETE24 +#define CURLE_SHARE_IN_USE CURLE_OBSOLETE57 +#define CURLE_URL_MALFORMAT_USER CURLE_NOT_BUILT_IN + +#define CURLE_FTP_ACCESS_DENIED CURLE_REMOTE_ACCESS_DENIED +#define CURLE_FTP_COULDNT_SET_BINARY CURLE_FTP_COULDNT_SET_TYPE +#define CURLE_FTP_QUOTE_ERROR CURLE_QUOTE_ERROR +#define CURLE_TFTP_DISKFULL CURLE_REMOTE_DISK_FULL +#define CURLE_TFTP_EXISTS CURLE_REMOTE_FILE_EXISTS +#define CURLE_HTTP_RANGE_ERROR CURLE_RANGE_ERROR +#define CURLE_FTP_SSL_FAILED CURLE_USE_SSL_FAILED + +/* The following were added earlier */ + +#define CURLE_OPERATION_TIMEOUTED CURLE_OPERATION_TIMEDOUT + +#define CURLE_HTTP_NOT_FOUND CURLE_HTTP_RETURNED_ERROR +#define CURLE_HTTP_PORT_FAILED CURLE_INTERFACE_FAILED +#define CURLE_FTP_COULDNT_STOR_FILE CURLE_UPLOAD_FAILED + +#define CURLE_FTP_PARTIAL_FILE CURLE_PARTIAL_FILE +#define CURLE_FTP_BAD_DOWNLOAD_RESUME CURLE_BAD_DOWNLOAD_RESUME + +/* This was the error code 50 in 7.7.3 and a few earlier versions, this + is no longer used by libcurl but is instead #defined here only to not + make programs break */ +#define CURLE_ALREADY_COMPLETE 99999 + +/* Provide defines for really old option names */ +#define CURLOPT_FILE CURLOPT_WRITEDATA /* name changed in 7.9.7 */ +#define CURLOPT_INFILE CURLOPT_READDATA /* name changed in 7.9.7 */ +#define CURLOPT_WRITEHEADER CURLOPT_HEADERDATA + +/* Since long deprecated options with no code in the lib that does anything + with them. */ +#define CURLOPT_WRITEINFO CURLOPT_OBSOLETE40 +#define CURLOPT_CLOSEPOLICY CURLOPT_OBSOLETE72 + +#endif /*!CURL_NO_OLDIES*/ + +/* + * Proxy error codes. Returned in CURLINFO_PROXY_ERROR if CURLE_PROXY was + * return for the transfers. + */ +typedef enum { + CURLPX_OK, + CURLPX_BAD_ADDRESS_TYPE, + CURLPX_BAD_VERSION, + CURLPX_CLOSED, + CURLPX_GSSAPI, + CURLPX_GSSAPI_PERMSG, + CURLPX_GSSAPI_PROTECTION, + CURLPX_IDENTD, + CURLPX_IDENTD_DIFFER, + CURLPX_LONG_HOSTNAME, + CURLPX_LONG_PASSWD, + CURLPX_LONG_USER, + CURLPX_NO_AUTH, + CURLPX_RECV_ADDRESS, + CURLPX_RECV_AUTH, + CURLPX_RECV_CONNECT, + CURLPX_RECV_REQACK, + CURLPX_REPLY_ADDRESS_TYPE_NOT_SUPPORTED, + CURLPX_REPLY_COMMAND_NOT_SUPPORTED, + CURLPX_REPLY_CONNECTION_REFUSED, + CURLPX_REPLY_GENERAL_SERVER_FAILURE, + CURLPX_REPLY_HOST_UNREACHABLE, + CURLPX_REPLY_NETWORK_UNREACHABLE, + CURLPX_REPLY_NOT_ALLOWED, + CURLPX_REPLY_TTL_EXPIRED, + CURLPX_REPLY_UNASSIGNED, + CURLPX_REQUEST_FAILED, + CURLPX_RESOLVE_HOST, + CURLPX_SEND_AUTH, + CURLPX_SEND_CONNECT, + CURLPX_SEND_REQUEST, + CURLPX_UNKNOWN_FAIL, + CURLPX_UNKNOWN_MODE, + CURLPX_USER_REJECTED, + CURLPX_LAST /* never use */ +} CURLproxycode; + +/* This prototype applies to all conversion callbacks */ +typedef CURLcode (*curl_conv_callback)(char *buffer, size_t length); + +typedef CURLcode (*curl_ssl_ctx_callback)(CURL *curl, /* easy handle */ + void *ssl_ctx, /* actually an OpenSSL + or WolfSSL SSL_CTX, + or an mbedTLS + mbedtls_ssl_config */ + void *userptr); + +typedef enum { + CURLPROXY_HTTP = 0, /* added in 7.10, new in 7.19.4 default is to use + CONNECT HTTP/1.1 */ + CURLPROXY_HTTP_1_0 = 1, /* added in 7.19.4, force to use CONNECT + HTTP/1.0 */ + CURLPROXY_HTTPS = 2, /* added in 7.52.0 */ + CURLPROXY_SOCKS4 = 4, /* support added in 7.15.2, enum existed already + in 7.10 */ + CURLPROXY_SOCKS5 = 5, /* added in 7.10 */ + CURLPROXY_SOCKS4A = 6, /* added in 7.18.0 */ + CURLPROXY_SOCKS5_HOSTNAME = 7 /* Use the SOCKS5 protocol but pass along the + host name rather than the IP address. added + in 7.18.0 */ +} curl_proxytype; /* this enum was added in 7.10 */ + +/* + * Bitmasks for CURLOPT_HTTPAUTH and CURLOPT_PROXYAUTH options: + * + * CURLAUTH_NONE - No HTTP authentication + * CURLAUTH_BASIC - HTTP Basic authentication (default) + * CURLAUTH_DIGEST - HTTP Digest authentication + * CURLAUTH_NEGOTIATE - HTTP Negotiate (SPNEGO) authentication + * CURLAUTH_GSSNEGOTIATE - Alias for CURLAUTH_NEGOTIATE (deprecated) + * CURLAUTH_NTLM - HTTP NTLM authentication + * CURLAUTH_DIGEST_IE - HTTP Digest authentication with IE flavour + * CURLAUTH_NTLM_WB - HTTP NTLM authentication delegated to winbind helper + * CURLAUTH_BEARER - HTTP Bearer token authentication + * CURLAUTH_ONLY - Use together with a single other type to force no + * authentication or just that single type + * CURLAUTH_ANY - All fine types set + * CURLAUTH_ANYSAFE - All fine types except Basic + */ + +#define CURLAUTH_NONE ((unsigned long)0) +#define CURLAUTH_BASIC (((unsigned long)1)<<0) +#define CURLAUTH_DIGEST (((unsigned long)1)<<1) +#define CURLAUTH_NEGOTIATE (((unsigned long)1)<<2) +/* Deprecated since the advent of CURLAUTH_NEGOTIATE */ +#define CURLAUTH_GSSNEGOTIATE CURLAUTH_NEGOTIATE +/* Used for CURLOPT_SOCKS5_AUTH to stay terminologically correct */ +#define CURLAUTH_GSSAPI CURLAUTH_NEGOTIATE +#define CURLAUTH_NTLM (((unsigned long)1)<<3) +#define CURLAUTH_DIGEST_IE (((unsigned long)1)<<4) +#define CURLAUTH_NTLM_WB (((unsigned long)1)<<5) +#define CURLAUTH_BEARER (((unsigned long)1)<<6) +#define CURLAUTH_AWS_SIGV4 (((unsigned long)1)<<7) +#define CURLAUTH_ONLY (((unsigned long)1)<<31) +#define CURLAUTH_ANY (~CURLAUTH_DIGEST_IE) +#define CURLAUTH_ANYSAFE (~(CURLAUTH_BASIC|CURLAUTH_DIGEST_IE)) + +#define CURLSSH_AUTH_ANY ~0 /* all types supported by the server */ +#define CURLSSH_AUTH_NONE 0 /* none allowed, silly but complete */ +#define CURLSSH_AUTH_PUBLICKEY (1<<0) /* public/private key files */ +#define CURLSSH_AUTH_PASSWORD (1<<1) /* password */ +#define CURLSSH_AUTH_HOST (1<<2) /* host key files */ +#define CURLSSH_AUTH_KEYBOARD (1<<3) /* keyboard interactive */ +#define CURLSSH_AUTH_AGENT (1<<4) /* agent (ssh-agent, pageant...) */ +#define CURLSSH_AUTH_GSSAPI (1<<5) /* gssapi (kerberos, ...) */ +#define CURLSSH_AUTH_DEFAULT CURLSSH_AUTH_ANY + +#define CURLGSSAPI_DELEGATION_NONE 0 /* no delegation (default) */ +#define CURLGSSAPI_DELEGATION_POLICY_FLAG (1<<0) /* if permitted by policy */ +#define CURLGSSAPI_DELEGATION_FLAG (1<<1) /* delegate always */ + +#define CURL_ERROR_SIZE 256 + +enum curl_khtype { + CURLKHTYPE_UNKNOWN, + CURLKHTYPE_RSA1, + CURLKHTYPE_RSA, + CURLKHTYPE_DSS, + CURLKHTYPE_ECDSA, + CURLKHTYPE_ED25519 +}; + +struct curl_khkey { + const char *key; /* points to a null-terminated string encoded with base64 + if len is zero, otherwise to the "raw" data */ + size_t len; + enum curl_khtype keytype; +}; + +/* this is the set of return values expected from the curl_sshkeycallback + callback */ +enum curl_khstat { + CURLKHSTAT_FINE_ADD_TO_FILE, + CURLKHSTAT_FINE, + CURLKHSTAT_REJECT, /* reject the connection, return an error */ + CURLKHSTAT_DEFER, /* do not accept it, but we can't answer right now so + this causes a CURLE_DEFER error but otherwise the + connection will be left intact etc */ + CURLKHSTAT_FINE_REPLACE, /* accept and replace the wrong key*/ + CURLKHSTAT_LAST /* not for use, only a marker for last-in-list */ +}; + +/* this is the set of status codes pass in to the callback */ +enum curl_khmatch { + CURLKHMATCH_OK, /* match */ + CURLKHMATCH_MISMATCH, /* host found, key mismatch! */ + CURLKHMATCH_MISSING, /* no matching host/key found */ + CURLKHMATCH_LAST /* not for use, only a marker for last-in-list */ +}; + +typedef int + (*curl_sshkeycallback) (CURL *easy, /* easy handle */ + const struct curl_khkey *knownkey, /* known */ + const struct curl_khkey *foundkey, /* found */ + enum curl_khmatch, /* libcurl's view on the keys */ + void *clientp); /* custom pointer passed from app */ + +/* parameter for the CURLOPT_USE_SSL option */ +typedef enum { + CURLUSESSL_NONE, /* do not attempt to use SSL */ + CURLUSESSL_TRY, /* try using SSL, proceed anyway otherwise */ + CURLUSESSL_CONTROL, /* SSL for the control connection or fail */ + CURLUSESSL_ALL, /* SSL for all communication or fail */ + CURLUSESSL_LAST /* not an option, never use */ +} curl_usessl; + +/* Definition of bits for the CURLOPT_SSL_OPTIONS argument: */ + +/* - ALLOW_BEAST tells libcurl to allow the BEAST SSL vulnerability in the + name of improving interoperability with older servers. Some SSL libraries + have introduced work-arounds for this flaw but those work-arounds sometimes + make the SSL communication fail. To regain functionality with those broken + servers, a user can this way allow the vulnerability back. */ +#define CURLSSLOPT_ALLOW_BEAST (1<<0) + +/* - NO_REVOKE tells libcurl to disable certificate revocation checks for those + SSL backends where such behavior is present. */ +#define CURLSSLOPT_NO_REVOKE (1<<1) + +/* - NO_PARTIALCHAIN tells libcurl to *NOT* accept a partial certificate chain + if possible. The OpenSSL backend has this ability. */ +#define CURLSSLOPT_NO_PARTIALCHAIN (1<<2) + +/* - REVOKE_BEST_EFFORT tells libcurl to ignore certificate revocation offline + checks and ignore missing revocation list for those SSL backends where such + behavior is present. */ +#define CURLSSLOPT_REVOKE_BEST_EFFORT (1<<3) + +/* - CURLSSLOPT_NATIVE_CA tells libcurl to use standard certificate store of + operating system. Currently implemented under MS-Windows. */ +#define CURLSSLOPT_NATIVE_CA (1<<4) + +/* - CURLSSLOPT_AUTO_CLIENT_CERT tells libcurl to automatically locate and use + a client certificate for authentication. (Schannel) */ +#define CURLSSLOPT_AUTO_CLIENT_CERT (1<<5) + +/* The default connection attempt delay in milliseconds for happy eyeballs. + CURLOPT_HAPPY_EYEBALLS_TIMEOUT_MS.3 and happy-eyeballs-timeout-ms.d document + this value, keep them in sync. */ +#define CURL_HET_DEFAULT 200L + +/* The default connection upkeep interval in milliseconds. */ +#define CURL_UPKEEP_INTERVAL_DEFAULT 60000L + +#ifndef CURL_NO_OLDIES /* define this to test if your app builds with all + the obsolete stuff removed! */ + +/* Backwards compatibility with older names */ +/* These are scheduled to disappear by 2009 */ + +#define CURLFTPSSL_NONE CURLUSESSL_NONE +#define CURLFTPSSL_TRY CURLUSESSL_TRY +#define CURLFTPSSL_CONTROL CURLUSESSL_CONTROL +#define CURLFTPSSL_ALL CURLUSESSL_ALL +#define CURLFTPSSL_LAST CURLUSESSL_LAST +#define curl_ftpssl curl_usessl +#endif /*!CURL_NO_OLDIES*/ + +/* parameter for the CURLOPT_FTP_SSL_CCC option */ +typedef enum { + CURLFTPSSL_CCC_NONE, /* do not send CCC */ + CURLFTPSSL_CCC_PASSIVE, /* Let the server initiate the shutdown */ + CURLFTPSSL_CCC_ACTIVE, /* Initiate the shutdown */ + CURLFTPSSL_CCC_LAST /* not an option, never use */ +} curl_ftpccc; + +/* parameter for the CURLOPT_FTPSSLAUTH option */ +typedef enum { + CURLFTPAUTH_DEFAULT, /* let libcurl decide */ + CURLFTPAUTH_SSL, /* use "AUTH SSL" */ + CURLFTPAUTH_TLS, /* use "AUTH TLS" */ + CURLFTPAUTH_LAST /* not an option, never use */ +} curl_ftpauth; + +/* parameter for the CURLOPT_FTP_CREATE_MISSING_DIRS option */ +typedef enum { + CURLFTP_CREATE_DIR_NONE, /* do NOT create missing dirs! */ + CURLFTP_CREATE_DIR, /* (FTP/SFTP) if CWD fails, try MKD and then CWD + again if MKD succeeded, for SFTP this does + similar magic */ + CURLFTP_CREATE_DIR_RETRY, /* (FTP only) if CWD fails, try MKD and then CWD + again even if MKD failed! */ + CURLFTP_CREATE_DIR_LAST /* not an option, never use */ +} curl_ftpcreatedir; + +/* parameter for the CURLOPT_FTP_FILEMETHOD option */ +typedef enum { + CURLFTPMETHOD_DEFAULT, /* let libcurl pick */ + CURLFTPMETHOD_MULTICWD, /* single CWD operation for each path part */ + CURLFTPMETHOD_NOCWD, /* no CWD at all */ + CURLFTPMETHOD_SINGLECWD, /* one CWD to full dir, then work on file */ + CURLFTPMETHOD_LAST /* not an option, never use */ +} curl_ftpmethod; + +/* bitmask defines for CURLOPT_HEADEROPT */ +#define CURLHEADER_UNIFIED 0 +#define CURLHEADER_SEPARATE (1<<0) + +/* CURLALTSVC_* are bits for the CURLOPT_ALTSVC_CTRL option */ +#define CURLALTSVC_READONLYFILE (1<<2) +#define CURLALTSVC_H1 (1<<3) +#define CURLALTSVC_H2 (1<<4) +#define CURLALTSVC_H3 (1<<5) + + +struct curl_hstsentry { + char *name; + size_t namelen; + unsigned int includeSubDomains:1; + char expire[18]; /* YYYYMMDD HH:MM:SS [null-terminated] */ +}; + +struct curl_index { + size_t index; /* the provided entry's "index" or count */ + size_t total; /* total number of entries to save */ +}; + +typedef enum { + CURLSTS_OK, + CURLSTS_DONE, + CURLSTS_FAIL +} CURLSTScode; + +typedef CURLSTScode (*curl_hstsread_callback)(CURL *easy, + struct curl_hstsentry *e, + void *userp); +typedef CURLSTScode (*curl_hstswrite_callback)(CURL *easy, + struct curl_hstsentry *e, + struct curl_index *i, + void *userp); + +/* CURLHSTS_* are bits for the CURLOPT_HSTS option */ +#define CURLHSTS_ENABLE (long)(1<<0) +#define CURLHSTS_READONLYFILE (long)(1<<1) + +/* CURLPROTO_ defines are for the CURLOPT_*PROTOCOLS options */ +#define CURLPROTO_HTTP (1<<0) +#define CURLPROTO_HTTPS (1<<1) +#define CURLPROTO_FTP (1<<2) +#define CURLPROTO_FTPS (1<<3) +#define CURLPROTO_SCP (1<<4) +#define CURLPROTO_SFTP (1<<5) +#define CURLPROTO_TELNET (1<<6) +#define CURLPROTO_LDAP (1<<7) +#define CURLPROTO_LDAPS (1<<8) +#define CURLPROTO_DICT (1<<9) +#define CURLPROTO_FILE (1<<10) +#define CURLPROTO_TFTP (1<<11) +#define CURLPROTO_IMAP (1<<12) +#define CURLPROTO_IMAPS (1<<13) +#define CURLPROTO_POP3 (1<<14) +#define CURLPROTO_POP3S (1<<15) +#define CURLPROTO_SMTP (1<<16) +#define CURLPROTO_SMTPS (1<<17) +#define CURLPROTO_RTSP (1<<18) +#define CURLPROTO_RTMP (1<<19) +#define CURLPROTO_RTMPT (1<<20) +#define CURLPROTO_RTMPE (1<<21) +#define CURLPROTO_RTMPTE (1<<22) +#define CURLPROTO_RTMPS (1<<23) +#define CURLPROTO_RTMPTS (1<<24) +#define CURLPROTO_GOPHER (1<<25) +#define CURLPROTO_SMB (1<<26) +#define CURLPROTO_SMBS (1<<27) +#define CURLPROTO_MQTT (1<<28) +#define CURLPROTO_GOPHERS (1<<29) +#define CURLPROTO_ALL (~0) /* enable everything */ + +/* long may be 32 or 64 bits, but we should never depend on anything else + but 32 */ +#define CURLOPTTYPE_LONG 0 +#define CURLOPTTYPE_OBJECTPOINT 10000 +#define CURLOPTTYPE_FUNCTIONPOINT 20000 +#define CURLOPTTYPE_OFF_T 30000 +#define CURLOPTTYPE_BLOB 40000 + +/* *STRINGPOINT is an alias for OBJECTPOINT to allow tools to extract the + string options from the header file */ + + +#define CURLOPT(na,t,nu) na = t + nu + +/* CURLOPT aliases that make no run-time difference */ + +/* 'char *' argument to a string with a trailing zero */ +#define CURLOPTTYPE_STRINGPOINT CURLOPTTYPE_OBJECTPOINT + +/* 'struct curl_slist *' argument */ +#define CURLOPTTYPE_SLISTPOINT CURLOPTTYPE_OBJECTPOINT + +/* 'void *' argument passed untouched to callback */ +#define CURLOPTTYPE_CBPOINT CURLOPTTYPE_OBJECTPOINT + +/* 'long' argument with a set of values/bitmask */ +#define CURLOPTTYPE_VALUES CURLOPTTYPE_LONG + +/* + * All CURLOPT_* values. + */ + +typedef enum { + /* This is the FILE * or void * the regular output should be written to. */ + CURLOPT(CURLOPT_WRITEDATA, CURLOPTTYPE_CBPOINT, 1), + + /* The full URL to get/put */ + CURLOPT(CURLOPT_URL, CURLOPTTYPE_STRINGPOINT, 2), + + /* Port number to connect to, if other than default. */ + CURLOPT(CURLOPT_PORT, CURLOPTTYPE_LONG, 3), + + /* Name of proxy to use. */ + CURLOPT(CURLOPT_PROXY, CURLOPTTYPE_STRINGPOINT, 4), + + /* "user:password;options" to use when fetching. */ + CURLOPT(CURLOPT_USERPWD, CURLOPTTYPE_STRINGPOINT, 5), + + /* "user:password" to use with proxy. */ + CURLOPT(CURLOPT_PROXYUSERPWD, CURLOPTTYPE_STRINGPOINT, 6), + + /* Range to get, specified as an ASCII string. */ + CURLOPT(CURLOPT_RANGE, CURLOPTTYPE_STRINGPOINT, 7), + + /* not used */ + + /* Specified file stream to upload from (use as input): */ + CURLOPT(CURLOPT_READDATA, CURLOPTTYPE_CBPOINT, 9), + + /* Buffer to receive error messages in, must be at least CURL_ERROR_SIZE + * bytes big. */ + CURLOPT(CURLOPT_ERRORBUFFER, CURLOPTTYPE_OBJECTPOINT, 10), + + /* Function that will be called to store the output (instead of fwrite). The + * parameters will use fwrite() syntax, make sure to follow them. */ + CURLOPT(CURLOPT_WRITEFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 11), + + /* Function that will be called to read the input (instead of fread). The + * parameters will use fread() syntax, make sure to follow them. */ + CURLOPT(CURLOPT_READFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 12), + + /* Time-out the read operation after this amount of seconds */ + CURLOPT(CURLOPT_TIMEOUT, CURLOPTTYPE_LONG, 13), + + /* If the CURLOPT_INFILE is used, this can be used to inform libcurl about + * how large the file being sent really is. That allows better error + * checking and better verifies that the upload was successful. -1 means + * unknown size. + * + * For large file support, there is also a _LARGE version of the key + * which takes an off_t type, allowing platforms with larger off_t + * sizes to handle larger files. See below for INFILESIZE_LARGE. + */ + CURLOPT(CURLOPT_INFILESIZE, CURLOPTTYPE_LONG, 14), + + /* POST static input fields. */ + CURLOPT(CURLOPT_POSTFIELDS, CURLOPTTYPE_OBJECTPOINT, 15), + + /* Set the referrer page (needed by some CGIs) */ + CURLOPT(CURLOPT_REFERER, CURLOPTTYPE_STRINGPOINT, 16), + + /* Set the FTP PORT string (interface name, named or numerical IP address) + Use i.e '-' to use default address. */ + CURLOPT(CURLOPT_FTPPORT, CURLOPTTYPE_STRINGPOINT, 17), + + /* Set the User-Agent string (examined by some CGIs) */ + CURLOPT(CURLOPT_USERAGENT, CURLOPTTYPE_STRINGPOINT, 18), + + /* If the download receives less than "low speed limit" bytes/second + * during "low speed time" seconds, the operations is aborted. + * You could i.e if you have a pretty high speed connection, abort if + * it is less than 2000 bytes/sec during 20 seconds. + */ + + /* Set the "low speed limit" */ + CURLOPT(CURLOPT_LOW_SPEED_LIMIT, CURLOPTTYPE_LONG, 19), + + /* Set the "low speed time" */ + CURLOPT(CURLOPT_LOW_SPEED_TIME, CURLOPTTYPE_LONG, 20), + + /* Set the continuation offset. + * + * Note there is also a _LARGE version of this key which uses + * off_t types, allowing for large file offsets on platforms which + * use larger-than-32-bit off_t's. Look below for RESUME_FROM_LARGE. + */ + CURLOPT(CURLOPT_RESUME_FROM, CURLOPTTYPE_LONG, 21), + + /* Set cookie in request: */ + CURLOPT(CURLOPT_COOKIE, CURLOPTTYPE_STRINGPOINT, 22), + + /* This points to a linked list of headers, struct curl_slist kind. This + list is also used for RTSP (in spite of its name) */ + CURLOPT(CURLOPT_HTTPHEADER, CURLOPTTYPE_SLISTPOINT, 23), + + /* This points to a linked list of post entries, struct curl_httppost */ + CURLOPT(CURLOPT_HTTPPOST, CURLOPTTYPE_OBJECTPOINT, 24), + + /* name of the file keeping your private SSL-certificate */ + CURLOPT(CURLOPT_SSLCERT, CURLOPTTYPE_STRINGPOINT, 25), + + /* password for the SSL or SSH private key */ + CURLOPT(CURLOPT_KEYPASSWD, CURLOPTTYPE_STRINGPOINT, 26), + + /* send TYPE parameter? */ + CURLOPT(CURLOPT_CRLF, CURLOPTTYPE_LONG, 27), + + /* send linked-list of QUOTE commands */ + CURLOPT(CURLOPT_QUOTE, CURLOPTTYPE_SLISTPOINT, 28), + + /* send FILE * or void * to store headers to, if you use a callback it + is simply passed to the callback unmodified */ + CURLOPT(CURLOPT_HEADERDATA, CURLOPTTYPE_CBPOINT, 29), + + /* point to a file to read the initial cookies from, also enables + "cookie awareness" */ + CURLOPT(CURLOPT_COOKIEFILE, CURLOPTTYPE_STRINGPOINT, 31), + + /* What version to specifically try to use. + See CURL_SSLVERSION defines below. */ + CURLOPT(CURLOPT_SSLVERSION, CURLOPTTYPE_VALUES, 32), + + /* What kind of HTTP time condition to use, see defines */ + CURLOPT(CURLOPT_TIMECONDITION, CURLOPTTYPE_VALUES, 33), + + /* Time to use with the above condition. Specified in number of seconds + since 1 Jan 1970 */ + CURLOPT(CURLOPT_TIMEVALUE, CURLOPTTYPE_LONG, 34), + + /* 35 = OBSOLETE */ + + /* Custom request, for customizing the get command like + HTTP: DELETE, TRACE and others + FTP: to use a different list command + */ + CURLOPT(CURLOPT_CUSTOMREQUEST, CURLOPTTYPE_STRINGPOINT, 36), + + /* FILE handle to use instead of stderr */ + CURLOPT(CURLOPT_STDERR, CURLOPTTYPE_OBJECTPOINT, 37), + + /* 38 is not used */ + + /* send linked-list of post-transfer QUOTE commands */ + CURLOPT(CURLOPT_POSTQUOTE, CURLOPTTYPE_SLISTPOINT, 39), + + /* OBSOLETE, do not use! */ + CURLOPT(CURLOPT_OBSOLETE40, CURLOPTTYPE_OBJECTPOINT, 40), + + /* talk a lot */ + CURLOPT(CURLOPT_VERBOSE, CURLOPTTYPE_LONG, 41), + + /* throw the header out too */ + CURLOPT(CURLOPT_HEADER, CURLOPTTYPE_LONG, 42), + + /* shut off the progress meter */ + CURLOPT(CURLOPT_NOPROGRESS, CURLOPTTYPE_LONG, 43), + + /* use HEAD to get http document */ + CURLOPT(CURLOPT_NOBODY, CURLOPTTYPE_LONG, 44), + + /* no output on http error codes >= 400 */ + CURLOPT(CURLOPT_FAILONERROR, CURLOPTTYPE_LONG, 45), + + /* this is an upload */ + CURLOPT(CURLOPT_UPLOAD, CURLOPTTYPE_LONG, 46), + + /* HTTP POST method */ + CURLOPT(CURLOPT_POST, CURLOPTTYPE_LONG, 47), + + /* bare names when listing directories */ + CURLOPT(CURLOPT_DIRLISTONLY, CURLOPTTYPE_LONG, 48), + + /* Append instead of overwrite on upload! */ + CURLOPT(CURLOPT_APPEND, CURLOPTTYPE_LONG, 50), + + /* Specify whether to read the user+password from the .netrc or the URL. + * This must be one of the CURL_NETRC_* enums below. */ + CURLOPT(CURLOPT_NETRC, CURLOPTTYPE_VALUES, 51), + + /* use Location: Luke! */ + CURLOPT(CURLOPT_FOLLOWLOCATION, CURLOPTTYPE_LONG, 52), + + /* transfer data in text/ASCII format */ + CURLOPT(CURLOPT_TRANSFERTEXT, CURLOPTTYPE_LONG, 53), + + /* HTTP PUT */ + CURLOPT(CURLOPT_PUT, CURLOPTTYPE_LONG, 54), + + /* 55 = OBSOLETE */ + + /* DEPRECATED + * Function that will be called instead of the internal progress display + * function. This function should be defined as the curl_progress_callback + * prototype defines. */ + CURLOPT(CURLOPT_PROGRESSFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 56), + + /* Data passed to the CURLOPT_PROGRESSFUNCTION and CURLOPT_XFERINFOFUNCTION + callbacks */ + CURLOPT(CURLOPT_XFERINFODATA, CURLOPTTYPE_CBPOINT, 57), +#define CURLOPT_PROGRESSDATA CURLOPT_XFERINFODATA + + /* We want the referrer field set automatically when following locations */ + CURLOPT(CURLOPT_AUTOREFERER, CURLOPTTYPE_LONG, 58), + + /* Port of the proxy, can be set in the proxy string as well with: + "[host]:[port]" */ + CURLOPT(CURLOPT_PROXYPORT, CURLOPTTYPE_LONG, 59), + + /* size of the POST input data, if strlen() is not good to use */ + CURLOPT(CURLOPT_POSTFIELDSIZE, CURLOPTTYPE_LONG, 60), + + /* tunnel non-http operations through a HTTP proxy */ + CURLOPT(CURLOPT_HTTPPROXYTUNNEL, CURLOPTTYPE_LONG, 61), + + /* Set the interface string to use as outgoing network interface */ + CURLOPT(CURLOPT_INTERFACE, CURLOPTTYPE_STRINGPOINT, 62), + + /* Set the krb4/5 security level, this also enables krb4/5 awareness. This + * is a string, 'clear', 'safe', 'confidential' or 'private'. If the string + * is set but doesn't match one of these, 'private' will be used. */ + CURLOPT(CURLOPT_KRBLEVEL, CURLOPTTYPE_STRINGPOINT, 63), + + /* Set if we should verify the peer in ssl handshake, set 1 to verify. */ + CURLOPT(CURLOPT_SSL_VERIFYPEER, CURLOPTTYPE_LONG, 64), + + /* The CApath or CAfile used to validate the peer certificate + this option is used only if SSL_VERIFYPEER is true */ + CURLOPT(CURLOPT_CAINFO, CURLOPTTYPE_STRINGPOINT, 65), + + /* 66 = OBSOLETE */ + /* 67 = OBSOLETE */ + + /* Maximum number of http redirects to follow */ + CURLOPT(CURLOPT_MAXREDIRS, CURLOPTTYPE_LONG, 68), + + /* Pass a long set to 1 to get the date of the requested document (if + possible)! Pass a zero to shut it off. */ + CURLOPT(CURLOPT_FILETIME, CURLOPTTYPE_LONG, 69), + + /* This points to a linked list of telnet options */ + CURLOPT(CURLOPT_TELNETOPTIONS, CURLOPTTYPE_SLISTPOINT, 70), + + /* Max amount of cached alive connections */ + CURLOPT(CURLOPT_MAXCONNECTS, CURLOPTTYPE_LONG, 71), + + /* OBSOLETE, do not use! */ + CURLOPT(CURLOPT_OBSOLETE72, CURLOPTTYPE_LONG, 72), + + /* 73 = OBSOLETE */ + + /* Set to explicitly use a new connection for the upcoming transfer. + Do not use this unless you're absolutely sure of this, as it makes the + operation slower and is less friendly for the network. */ + CURLOPT(CURLOPT_FRESH_CONNECT, CURLOPTTYPE_LONG, 74), + + /* Set to explicitly forbid the upcoming transfer's connection to be re-used + when done. Do not use this unless you're absolutely sure of this, as it + makes the operation slower and is less friendly for the network. */ + CURLOPT(CURLOPT_FORBID_REUSE, CURLOPTTYPE_LONG, 75), + + /* Set to a file name that contains random data for libcurl to use to + seed the random engine when doing SSL connects. */ + CURLOPT(CURLOPT_RANDOM_FILE, CURLOPTTYPE_STRINGPOINT, 76), + + /* Set to the Entropy Gathering Daemon socket pathname */ + CURLOPT(CURLOPT_EGDSOCKET, CURLOPTTYPE_STRINGPOINT, 77), + + /* Time-out connect operations after this amount of seconds, if connects are + OK within this time, then fine... This only aborts the connect phase. */ + CURLOPT(CURLOPT_CONNECTTIMEOUT, CURLOPTTYPE_LONG, 78), + + /* Function that will be called to store headers (instead of fwrite). The + * parameters will use fwrite() syntax, make sure to follow them. */ + CURLOPT(CURLOPT_HEADERFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 79), + + /* Set this to force the HTTP request to get back to GET. Only really usable + if POST, PUT or a custom request have been used first. + */ + CURLOPT(CURLOPT_HTTPGET, CURLOPTTYPE_LONG, 80), + + /* Set if we should verify the Common name from the peer certificate in ssl + * handshake, set 1 to check existence, 2 to ensure that it matches the + * provided hostname. */ + CURLOPT(CURLOPT_SSL_VERIFYHOST, CURLOPTTYPE_LONG, 81), + + /* Specify which file name to write all known cookies in after completed + operation. Set file name to "-" (dash) to make it go to stdout. */ + CURLOPT(CURLOPT_COOKIEJAR, CURLOPTTYPE_STRINGPOINT, 82), + + /* Specify which SSL ciphers to use */ + CURLOPT(CURLOPT_SSL_CIPHER_LIST, CURLOPTTYPE_STRINGPOINT, 83), + + /* Specify which HTTP version to use! This must be set to one of the + CURL_HTTP_VERSION* enums set below. */ + CURLOPT(CURLOPT_HTTP_VERSION, CURLOPTTYPE_VALUES, 84), + + /* Specifically switch on or off the FTP engine's use of the EPSV command. By + default, that one will always be attempted before the more traditional + PASV command. */ + CURLOPT(CURLOPT_FTP_USE_EPSV, CURLOPTTYPE_LONG, 85), + + /* type of the file keeping your SSL-certificate ("DER", "PEM", "ENG") */ + CURLOPT(CURLOPT_SSLCERTTYPE, CURLOPTTYPE_STRINGPOINT, 86), + + /* name of the file keeping your private SSL-key */ + CURLOPT(CURLOPT_SSLKEY, CURLOPTTYPE_STRINGPOINT, 87), + + /* type of the file keeping your private SSL-key ("DER", "PEM", "ENG") */ + CURLOPT(CURLOPT_SSLKEYTYPE, CURLOPTTYPE_STRINGPOINT, 88), + + /* crypto engine for the SSL-sub system */ + CURLOPT(CURLOPT_SSLENGINE, CURLOPTTYPE_STRINGPOINT, 89), + + /* set the crypto engine for the SSL-sub system as default + the param has no meaning... + */ + CURLOPT(CURLOPT_SSLENGINE_DEFAULT, CURLOPTTYPE_LONG, 90), + + /* Non-zero value means to use the global dns cache */ + /* DEPRECATED, do not use! */ + CURLOPT(CURLOPT_DNS_USE_GLOBAL_CACHE, CURLOPTTYPE_LONG, 91), + + /* DNS cache timeout */ + CURLOPT(CURLOPT_DNS_CACHE_TIMEOUT, CURLOPTTYPE_LONG, 92), + + /* send linked-list of pre-transfer QUOTE commands */ + CURLOPT(CURLOPT_PREQUOTE, CURLOPTTYPE_SLISTPOINT, 93), + + /* set the debug function */ + CURLOPT(CURLOPT_DEBUGFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 94), + + /* set the data for the debug function */ + CURLOPT(CURLOPT_DEBUGDATA, CURLOPTTYPE_CBPOINT, 95), + + /* mark this as start of a cookie session */ + CURLOPT(CURLOPT_COOKIESESSION, CURLOPTTYPE_LONG, 96), + + /* The CApath directory used to validate the peer certificate + this option is used only if SSL_VERIFYPEER is true */ + CURLOPT(CURLOPT_CAPATH, CURLOPTTYPE_STRINGPOINT, 97), + + /* Instruct libcurl to use a smaller receive buffer */ + CURLOPT(CURLOPT_BUFFERSIZE, CURLOPTTYPE_LONG, 98), + + /* Instruct libcurl to not use any signal/alarm handlers, even when using + timeouts. This option is useful for multi-threaded applications. + See libcurl-the-guide for more background information. */ + CURLOPT(CURLOPT_NOSIGNAL, CURLOPTTYPE_LONG, 99), + + /* Provide a CURLShare for mutexing non-ts data */ + CURLOPT(CURLOPT_SHARE, CURLOPTTYPE_OBJECTPOINT, 100), + + /* indicates type of proxy. accepted values are CURLPROXY_HTTP (default), + CURLPROXY_HTTPS, CURLPROXY_SOCKS4, CURLPROXY_SOCKS4A and + CURLPROXY_SOCKS5. */ + CURLOPT(CURLOPT_PROXYTYPE, CURLOPTTYPE_VALUES, 101), + + /* Set the Accept-Encoding string. Use this to tell a server you would like + the response to be compressed. Before 7.21.6, this was known as + CURLOPT_ENCODING */ + CURLOPT(CURLOPT_ACCEPT_ENCODING, CURLOPTTYPE_STRINGPOINT, 102), + + /* Set pointer to private data */ + CURLOPT(CURLOPT_PRIVATE, CURLOPTTYPE_OBJECTPOINT, 103), + + /* Set aliases for HTTP 200 in the HTTP Response header */ + CURLOPT(CURLOPT_HTTP200ALIASES, CURLOPTTYPE_SLISTPOINT, 104), + + /* Continue to send authentication (user+password) when following locations, + even when hostname changed. This can potentially send off the name + and password to whatever host the server decides. */ + CURLOPT(CURLOPT_UNRESTRICTED_AUTH, CURLOPTTYPE_LONG, 105), + + /* Specifically switch on or off the FTP engine's use of the EPRT command ( + it also disables the LPRT attempt). By default, those ones will always be + attempted before the good old traditional PORT command. */ + CURLOPT(CURLOPT_FTP_USE_EPRT, CURLOPTTYPE_LONG, 106), + + /* Set this to a bitmask value to enable the particular authentications + methods you like. Use this in combination with CURLOPT_USERPWD. + Note that setting multiple bits may cause extra network round-trips. */ + CURLOPT(CURLOPT_HTTPAUTH, CURLOPTTYPE_VALUES, 107), + + /* Set the ssl context callback function, currently only for OpenSSL or + WolfSSL ssl_ctx, or mbedTLS mbedtls_ssl_config in the second argument. + The function must match the curl_ssl_ctx_callback prototype. */ + CURLOPT(CURLOPT_SSL_CTX_FUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 108), + + /* Set the userdata for the ssl context callback function's third + argument */ + CURLOPT(CURLOPT_SSL_CTX_DATA, CURLOPTTYPE_CBPOINT, 109), + + /* FTP Option that causes missing dirs to be created on the remote server. + In 7.19.4 we introduced the convenience enums for this option using the + CURLFTP_CREATE_DIR prefix. + */ + CURLOPT(CURLOPT_FTP_CREATE_MISSING_DIRS, CURLOPTTYPE_LONG, 110), + + /* Set this to a bitmask value to enable the particular authentications + methods you like. Use this in combination with CURLOPT_PROXYUSERPWD. + Note that setting multiple bits may cause extra network round-trips. */ + CURLOPT(CURLOPT_PROXYAUTH, CURLOPTTYPE_VALUES, 111), + + /* FTP option that changes the timeout, in seconds, associated with + getting a response. This is different from transfer timeout time and + essentially places a demand on the FTP server to acknowledge commands + in a timely manner. */ + CURLOPT(CURLOPT_FTP_RESPONSE_TIMEOUT, CURLOPTTYPE_LONG, 112), +#define CURLOPT_SERVER_RESPONSE_TIMEOUT CURLOPT_FTP_RESPONSE_TIMEOUT + + /* Set this option to one of the CURL_IPRESOLVE_* defines (see below) to + tell libcurl to use those IP versions only. This only has effect on + systems with support for more than one, i.e IPv4 _and_ IPv6. */ + CURLOPT(CURLOPT_IPRESOLVE, CURLOPTTYPE_VALUES, 113), + + /* Set this option to limit the size of a file that will be downloaded from + an HTTP or FTP server. + + Note there is also _LARGE version which adds large file support for + platforms which have larger off_t sizes. See MAXFILESIZE_LARGE below. */ + CURLOPT(CURLOPT_MAXFILESIZE, CURLOPTTYPE_LONG, 114), + + /* See the comment for INFILESIZE above, but in short, specifies + * the size of the file being uploaded. -1 means unknown. + */ + CURLOPT(CURLOPT_INFILESIZE_LARGE, CURLOPTTYPE_OFF_T, 115), + + /* Sets the continuation offset. There is also a CURLOPTTYPE_LONG version + * of this; look above for RESUME_FROM. + */ + CURLOPT(CURLOPT_RESUME_FROM_LARGE, CURLOPTTYPE_OFF_T, 116), + + /* Sets the maximum size of data that will be downloaded from + * an HTTP or FTP server. See MAXFILESIZE above for the LONG version. + */ + CURLOPT(CURLOPT_MAXFILESIZE_LARGE, CURLOPTTYPE_OFF_T, 117), + + /* Set this option to the file name of your .netrc file you want libcurl + to parse (using the CURLOPT_NETRC option). If not set, libcurl will do + a poor attempt to find the user's home directory and check for a .netrc + file in there. */ + CURLOPT(CURLOPT_NETRC_FILE, CURLOPTTYPE_STRINGPOINT, 118), + + /* Enable SSL/TLS for FTP, pick one of: + CURLUSESSL_TRY - try using SSL, proceed anyway otherwise + CURLUSESSL_CONTROL - SSL for the control connection or fail + CURLUSESSL_ALL - SSL for all communication or fail + */ + CURLOPT(CURLOPT_USE_SSL, CURLOPTTYPE_VALUES, 119), + + /* The _LARGE version of the standard POSTFIELDSIZE option */ + CURLOPT(CURLOPT_POSTFIELDSIZE_LARGE, CURLOPTTYPE_OFF_T, 120), + + /* Enable/disable the TCP Nagle algorithm */ + CURLOPT(CURLOPT_TCP_NODELAY, CURLOPTTYPE_LONG, 121), + + /* 122 OBSOLETE, used in 7.12.3. Gone in 7.13.0 */ + /* 123 OBSOLETE. Gone in 7.16.0 */ + /* 124 OBSOLETE, used in 7.12.3. Gone in 7.13.0 */ + /* 125 OBSOLETE, used in 7.12.3. Gone in 7.13.0 */ + /* 126 OBSOLETE, used in 7.12.3. Gone in 7.13.0 */ + /* 127 OBSOLETE. Gone in 7.16.0 */ + /* 128 OBSOLETE. Gone in 7.16.0 */ + + /* When FTP over SSL/TLS is selected (with CURLOPT_USE_SSL), this option + can be used to change libcurl's default action which is to first try + "AUTH SSL" and then "AUTH TLS" in this order, and proceed when a OK + response has been received. + + Available parameters are: + CURLFTPAUTH_DEFAULT - let libcurl decide + CURLFTPAUTH_SSL - try "AUTH SSL" first, then TLS + CURLFTPAUTH_TLS - try "AUTH TLS" first, then SSL + */ + CURLOPT(CURLOPT_FTPSSLAUTH, CURLOPTTYPE_VALUES, 129), + + CURLOPT(CURLOPT_IOCTLFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 130), + CURLOPT(CURLOPT_IOCTLDATA, CURLOPTTYPE_CBPOINT, 131), + + /* 132 OBSOLETE. Gone in 7.16.0 */ + /* 133 OBSOLETE. Gone in 7.16.0 */ + + /* null-terminated string for pass on to the FTP server when asked for + "account" info */ + CURLOPT(CURLOPT_FTP_ACCOUNT, CURLOPTTYPE_STRINGPOINT, 134), + + /* feed cookie into cookie engine */ + CURLOPT(CURLOPT_COOKIELIST, CURLOPTTYPE_STRINGPOINT, 135), + + /* ignore Content-Length */ + CURLOPT(CURLOPT_IGNORE_CONTENT_LENGTH, CURLOPTTYPE_LONG, 136), + + /* Set to non-zero to skip the IP address received in a 227 PASV FTP server + response. Typically used for FTP-SSL purposes but is not restricted to + that. libcurl will then instead use the same IP address it used for the + control connection. */ + CURLOPT(CURLOPT_FTP_SKIP_PASV_IP, CURLOPTTYPE_LONG, 137), + + /* Select "file method" to use when doing FTP, see the curl_ftpmethod + above. */ + CURLOPT(CURLOPT_FTP_FILEMETHOD, CURLOPTTYPE_VALUES, 138), + + /* Local port number to bind the socket to */ + CURLOPT(CURLOPT_LOCALPORT, CURLOPTTYPE_LONG, 139), + + /* Number of ports to try, including the first one set with LOCALPORT. + Thus, setting it to 1 will make no additional attempts but the first. + */ + CURLOPT(CURLOPT_LOCALPORTRANGE, CURLOPTTYPE_LONG, 140), + + /* no transfer, set up connection and let application use the socket by + extracting it with CURLINFO_LASTSOCKET */ + CURLOPT(CURLOPT_CONNECT_ONLY, CURLOPTTYPE_LONG, 141), + + /* Function that will be called to convert from the + network encoding (instead of using the iconv calls in libcurl) */ + CURLOPT(CURLOPT_CONV_FROM_NETWORK_FUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 142), + + /* Function that will be called to convert to the + network encoding (instead of using the iconv calls in libcurl) */ + CURLOPT(CURLOPT_CONV_TO_NETWORK_FUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 143), + + /* Function that will be called to convert from UTF8 + (instead of using the iconv calls in libcurl) + Note that this is used only for SSL certificate processing */ + CURLOPT(CURLOPT_CONV_FROM_UTF8_FUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 144), + + /* if the connection proceeds too quickly then need to slow it down */ + /* limit-rate: maximum number of bytes per second to send or receive */ + CURLOPT(CURLOPT_MAX_SEND_SPEED_LARGE, CURLOPTTYPE_OFF_T, 145), + CURLOPT(CURLOPT_MAX_RECV_SPEED_LARGE, CURLOPTTYPE_OFF_T, 146), + + /* Pointer to command string to send if USER/PASS fails. */ + CURLOPT(CURLOPT_FTP_ALTERNATIVE_TO_USER, CURLOPTTYPE_STRINGPOINT, 147), + + /* callback function for setting socket options */ + CURLOPT(CURLOPT_SOCKOPTFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 148), + CURLOPT(CURLOPT_SOCKOPTDATA, CURLOPTTYPE_CBPOINT, 149), + + /* set to 0 to disable session ID re-use for this transfer, default is + enabled (== 1) */ + CURLOPT(CURLOPT_SSL_SESSIONID_CACHE, CURLOPTTYPE_LONG, 150), + + /* allowed SSH authentication methods */ + CURLOPT(CURLOPT_SSH_AUTH_TYPES, CURLOPTTYPE_VALUES, 151), + + /* Used by scp/sftp to do public/private key authentication */ + CURLOPT(CURLOPT_SSH_PUBLIC_KEYFILE, CURLOPTTYPE_STRINGPOINT, 152), + CURLOPT(CURLOPT_SSH_PRIVATE_KEYFILE, CURLOPTTYPE_STRINGPOINT, 153), + + /* Send CCC (Clear Command Channel) after authentication */ + CURLOPT(CURLOPT_FTP_SSL_CCC, CURLOPTTYPE_LONG, 154), + + /* Same as TIMEOUT and CONNECTTIMEOUT, but with ms resolution */ + CURLOPT(CURLOPT_TIMEOUT_MS, CURLOPTTYPE_LONG, 155), + CURLOPT(CURLOPT_CONNECTTIMEOUT_MS, CURLOPTTYPE_LONG, 156), + + /* set to zero to disable the libcurl's decoding and thus pass the raw body + data to the application even when it is encoded/compressed */ + CURLOPT(CURLOPT_HTTP_TRANSFER_DECODING, CURLOPTTYPE_LONG, 157), + CURLOPT(CURLOPT_HTTP_CONTENT_DECODING, CURLOPTTYPE_LONG, 158), + + /* Permission used when creating new files and directories on the remote + server for protocols that support it, SFTP/SCP/FILE */ + CURLOPT(CURLOPT_NEW_FILE_PERMS, CURLOPTTYPE_LONG, 159), + CURLOPT(CURLOPT_NEW_DIRECTORY_PERMS, CURLOPTTYPE_LONG, 160), + + /* Set the behavior of POST when redirecting. Values must be set to one + of CURL_REDIR* defines below. This used to be called CURLOPT_POST301 */ + CURLOPT(CURLOPT_POSTREDIR, CURLOPTTYPE_VALUES, 161), + + /* used by scp/sftp to verify the host's public key */ + CURLOPT(CURLOPT_SSH_HOST_PUBLIC_KEY_MD5, CURLOPTTYPE_STRINGPOINT, 162), + + /* Callback function for opening socket (instead of socket(2)). Optionally, + callback is able change the address or refuse to connect returning + CURL_SOCKET_BAD. The callback should have type + curl_opensocket_callback */ + CURLOPT(CURLOPT_OPENSOCKETFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 163), + CURLOPT(CURLOPT_OPENSOCKETDATA, CURLOPTTYPE_CBPOINT, 164), + + /* POST volatile input fields. */ + CURLOPT(CURLOPT_COPYPOSTFIELDS, CURLOPTTYPE_OBJECTPOINT, 165), + + /* set transfer mode (;type=<a|i>) when doing FTP via an HTTP proxy */ + CURLOPT(CURLOPT_PROXY_TRANSFER_MODE, CURLOPTTYPE_LONG, 166), + + /* Callback function for seeking in the input stream */ + CURLOPT(CURLOPT_SEEKFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 167), + CURLOPT(CURLOPT_SEEKDATA, CURLOPTTYPE_CBPOINT, 168), + + /* CRL file */ + CURLOPT(CURLOPT_CRLFILE, CURLOPTTYPE_STRINGPOINT, 169), + + /* Issuer certificate */ + CURLOPT(CURLOPT_ISSUERCERT, CURLOPTTYPE_STRINGPOINT, 170), + + /* (IPv6) Address scope */ + CURLOPT(CURLOPT_ADDRESS_SCOPE, CURLOPTTYPE_LONG, 171), + + /* Collect certificate chain info and allow it to get retrievable with + CURLINFO_CERTINFO after the transfer is complete. */ + CURLOPT(CURLOPT_CERTINFO, CURLOPTTYPE_LONG, 172), + + /* "name" and "pwd" to use when fetching. */ + CURLOPT(CURLOPT_USERNAME, CURLOPTTYPE_STRINGPOINT, 173), + CURLOPT(CURLOPT_PASSWORD, CURLOPTTYPE_STRINGPOINT, 174), + + /* "name" and "pwd" to use with Proxy when fetching. */ + CURLOPT(CURLOPT_PROXYUSERNAME, CURLOPTTYPE_STRINGPOINT, 175), + CURLOPT(CURLOPT_PROXYPASSWORD, CURLOPTTYPE_STRINGPOINT, 176), + + /* Comma separated list of hostnames defining no-proxy zones. These should + match both hostnames directly, and hostnames within a domain. For + example, local.com will match local.com and www.local.com, but NOT + notlocal.com or www.notlocal.com. For compatibility with other + implementations of this, .local.com will be considered to be the same as + local.com. A single * is the only valid wildcard, and effectively + disables the use of proxy. */ + CURLOPT(CURLOPT_NOPROXY, CURLOPTTYPE_STRINGPOINT, 177), + + /* block size for TFTP transfers */ + CURLOPT(CURLOPT_TFTP_BLKSIZE, CURLOPTTYPE_LONG, 178), + + /* Socks Service */ + /* DEPRECATED, do not use! */ + CURLOPT(CURLOPT_SOCKS5_GSSAPI_SERVICE, CURLOPTTYPE_STRINGPOINT, 179), + + /* Socks Service */ + CURLOPT(CURLOPT_SOCKS5_GSSAPI_NEC, CURLOPTTYPE_LONG, 180), + + /* set the bitmask for the protocols that are allowed to be used for the + transfer, which thus helps the app which takes URLs from users or other + external inputs and want to restrict what protocol(s) to deal + with. Defaults to CURLPROTO_ALL. */ + CURLOPT(CURLOPT_PROTOCOLS, CURLOPTTYPE_LONG, 181), + + /* set the bitmask for the protocols that libcurl is allowed to follow to, + as a subset of the CURLOPT_PROTOCOLS ones. That means the protocol needs + to be set in both bitmasks to be allowed to get redirected to. */ + CURLOPT(CURLOPT_REDIR_PROTOCOLS, CURLOPTTYPE_LONG, 182), + + /* set the SSH knownhost file name to use */ + CURLOPT(CURLOPT_SSH_KNOWNHOSTS, CURLOPTTYPE_STRINGPOINT, 183), + + /* set the SSH host key callback, must point to a curl_sshkeycallback + function */ + CURLOPT(CURLOPT_SSH_KEYFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 184), + + /* set the SSH host key callback custom pointer */ + CURLOPT(CURLOPT_SSH_KEYDATA, CURLOPTTYPE_CBPOINT, 185), + + /* set the SMTP mail originator */ + CURLOPT(CURLOPT_MAIL_FROM, CURLOPTTYPE_STRINGPOINT, 186), + + /* set the list of SMTP mail receiver(s) */ + CURLOPT(CURLOPT_MAIL_RCPT, CURLOPTTYPE_SLISTPOINT, 187), + + /* FTP: send PRET before PASV */ + CURLOPT(CURLOPT_FTP_USE_PRET, CURLOPTTYPE_LONG, 188), + + /* RTSP request method (OPTIONS, SETUP, PLAY, etc...) */ + CURLOPT(CURLOPT_RTSP_REQUEST, CURLOPTTYPE_VALUES, 189), + + /* The RTSP session identifier */ + CURLOPT(CURLOPT_RTSP_SESSION_ID, CURLOPTTYPE_STRINGPOINT, 190), + + /* The RTSP stream URI */ + CURLOPT(CURLOPT_RTSP_STREAM_URI, CURLOPTTYPE_STRINGPOINT, 191), + + /* The Transport: header to use in RTSP requests */ + CURLOPT(CURLOPT_RTSP_TRANSPORT, CURLOPTTYPE_STRINGPOINT, 192), + + /* Manually initialize the client RTSP CSeq for this handle */ + CURLOPT(CURLOPT_RTSP_CLIENT_CSEQ, CURLOPTTYPE_LONG, 193), + + /* Manually initialize the server RTSP CSeq for this handle */ + CURLOPT(CURLOPT_RTSP_SERVER_CSEQ, CURLOPTTYPE_LONG, 194), + + /* The stream to pass to INTERLEAVEFUNCTION. */ + CURLOPT(CURLOPT_INTERLEAVEDATA, CURLOPTTYPE_CBPOINT, 195), + + /* Let the application define a custom write method for RTP data */ + CURLOPT(CURLOPT_INTERLEAVEFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 196), + + /* Turn on wildcard matching */ + CURLOPT(CURLOPT_WILDCARDMATCH, CURLOPTTYPE_LONG, 197), + + /* Directory matching callback called before downloading of an + individual file (chunk) started */ + CURLOPT(CURLOPT_CHUNK_BGN_FUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 198), + + /* Directory matching callback called after the file (chunk) + was downloaded, or skipped */ + CURLOPT(CURLOPT_CHUNK_END_FUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 199), + + /* Change match (fnmatch-like) callback for wildcard matching */ + CURLOPT(CURLOPT_FNMATCH_FUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 200), + + /* Let the application define custom chunk data pointer */ + CURLOPT(CURLOPT_CHUNK_DATA, CURLOPTTYPE_CBPOINT, 201), + + /* FNMATCH_FUNCTION user pointer */ + CURLOPT(CURLOPT_FNMATCH_DATA, CURLOPTTYPE_CBPOINT, 202), + + /* send linked-list of name:port:address sets */ + CURLOPT(CURLOPT_RESOLVE, CURLOPTTYPE_SLISTPOINT, 203), + + /* Set a username for authenticated TLS */ + CURLOPT(CURLOPT_TLSAUTH_USERNAME, CURLOPTTYPE_STRINGPOINT, 204), + + /* Set a password for authenticated TLS */ + CURLOPT(CURLOPT_TLSAUTH_PASSWORD, CURLOPTTYPE_STRINGPOINT, 205), + + /* Set authentication type for authenticated TLS */ + CURLOPT(CURLOPT_TLSAUTH_TYPE, CURLOPTTYPE_STRINGPOINT, 206), + + /* Set to 1 to enable the "TE:" header in HTTP requests to ask for + compressed transfer-encoded responses. Set to 0 to disable the use of TE: + in outgoing requests. The current default is 0, but it might change in a + future libcurl release. + + libcurl will ask for the compressed methods it knows of, and if that + isn't any, it will not ask for transfer-encoding at all even if this + option is set to 1. + + */ + CURLOPT(CURLOPT_TRANSFER_ENCODING, CURLOPTTYPE_LONG, 207), + + /* Callback function for closing socket (instead of close(2)). The callback + should have type curl_closesocket_callback */ + CURLOPT(CURLOPT_CLOSESOCKETFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 208), + CURLOPT(CURLOPT_CLOSESOCKETDATA, CURLOPTTYPE_CBPOINT, 209), + + /* allow GSSAPI credential delegation */ + CURLOPT(CURLOPT_GSSAPI_DELEGATION, CURLOPTTYPE_VALUES, 210), + + /* Set the name servers to use for DNS resolution */ + CURLOPT(CURLOPT_DNS_SERVERS, CURLOPTTYPE_STRINGPOINT, 211), + + /* Time-out accept operations (currently for FTP only) after this amount + of milliseconds. */ + CURLOPT(CURLOPT_ACCEPTTIMEOUT_MS, CURLOPTTYPE_LONG, 212), + + /* Set TCP keepalive */ + CURLOPT(CURLOPT_TCP_KEEPALIVE, CURLOPTTYPE_LONG, 213), + + /* non-universal keepalive knobs (Linux, AIX, HP-UX, more) */ + CURLOPT(CURLOPT_TCP_KEEPIDLE, CURLOPTTYPE_LONG, 214), + CURLOPT(CURLOPT_TCP_KEEPINTVL, CURLOPTTYPE_LONG, 215), + + /* Enable/disable specific SSL features with a bitmask, see CURLSSLOPT_* */ + CURLOPT(CURLOPT_SSL_OPTIONS, CURLOPTTYPE_VALUES, 216), + + /* Set the SMTP auth originator */ + CURLOPT(CURLOPT_MAIL_AUTH, CURLOPTTYPE_STRINGPOINT, 217), + + /* Enable/disable SASL initial response */ + CURLOPT(CURLOPT_SASL_IR, CURLOPTTYPE_LONG, 218), + + /* Function that will be called instead of the internal progress display + * function. This function should be defined as the curl_xferinfo_callback + * prototype defines. (Deprecates CURLOPT_PROGRESSFUNCTION) */ + CURLOPT(CURLOPT_XFERINFOFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 219), + + /* The XOAUTH2 bearer token */ + CURLOPT(CURLOPT_XOAUTH2_BEARER, CURLOPTTYPE_STRINGPOINT, 220), + + /* Set the interface string to use as outgoing network + * interface for DNS requests. + * Only supported by the c-ares DNS backend */ + CURLOPT(CURLOPT_DNS_INTERFACE, CURLOPTTYPE_STRINGPOINT, 221), + + /* Set the local IPv4 address to use for outgoing DNS requests. + * Only supported by the c-ares DNS backend */ + CURLOPT(CURLOPT_DNS_LOCAL_IP4, CURLOPTTYPE_STRINGPOINT, 222), + + /* Set the local IPv6 address to use for outgoing DNS requests. + * Only supported by the c-ares DNS backend */ + CURLOPT(CURLOPT_DNS_LOCAL_IP6, CURLOPTTYPE_STRINGPOINT, 223), + + /* Set authentication options directly */ + CURLOPT(CURLOPT_LOGIN_OPTIONS, CURLOPTTYPE_STRINGPOINT, 224), + + /* Enable/disable TLS NPN extension (http2 over ssl might fail without) */ + CURLOPT(CURLOPT_SSL_ENABLE_NPN, CURLOPTTYPE_LONG, 225), + + /* Enable/disable TLS ALPN extension (http2 over ssl might fail without) */ + CURLOPT(CURLOPT_SSL_ENABLE_ALPN, CURLOPTTYPE_LONG, 226), + + /* Time to wait for a response to a HTTP request containing an + * Expect: 100-continue header before sending the data anyway. */ + CURLOPT(CURLOPT_EXPECT_100_TIMEOUT_MS, CURLOPTTYPE_LONG, 227), + + /* This points to a linked list of headers used for proxy requests only, + struct curl_slist kind */ + CURLOPT(CURLOPT_PROXYHEADER, CURLOPTTYPE_SLISTPOINT, 228), + + /* Pass in a bitmask of "header options" */ + CURLOPT(CURLOPT_HEADEROPT, CURLOPTTYPE_VALUES, 229), + + /* The public key in DER form used to validate the peer public key + this option is used only if SSL_VERIFYPEER is true */ + CURLOPT(CURLOPT_PINNEDPUBLICKEY, CURLOPTTYPE_STRINGPOINT, 230), + + /* Path to Unix domain socket */ + CURLOPT(CURLOPT_UNIX_SOCKET_PATH, CURLOPTTYPE_STRINGPOINT, 231), + + /* Set if we should verify the certificate status. */ + CURLOPT(CURLOPT_SSL_VERIFYSTATUS, CURLOPTTYPE_LONG, 232), + + /* Set if we should enable TLS false start. */ + CURLOPT(CURLOPT_SSL_FALSESTART, CURLOPTTYPE_LONG, 233), + + /* Do not squash dot-dot sequences */ + CURLOPT(CURLOPT_PATH_AS_IS, CURLOPTTYPE_LONG, 234), + + /* Proxy Service Name */ + CURLOPT(CURLOPT_PROXY_SERVICE_NAME, CURLOPTTYPE_STRINGPOINT, 235), + + /* Service Name */ + CURLOPT(CURLOPT_SERVICE_NAME, CURLOPTTYPE_STRINGPOINT, 236), + + /* Wait/don't wait for pipe/mutex to clarify */ + CURLOPT(CURLOPT_PIPEWAIT, CURLOPTTYPE_LONG, 237), + + /* Set the protocol used when curl is given a URL without a protocol */ + CURLOPT(CURLOPT_DEFAULT_PROTOCOL, CURLOPTTYPE_STRINGPOINT, 238), + + /* Set stream weight, 1 - 256 (default is 16) */ + CURLOPT(CURLOPT_STREAM_WEIGHT, CURLOPTTYPE_LONG, 239), + + /* Set stream dependency on another CURL handle */ + CURLOPT(CURLOPT_STREAM_DEPENDS, CURLOPTTYPE_OBJECTPOINT, 240), + + /* Set E-xclusive stream dependency on another CURL handle */ + CURLOPT(CURLOPT_STREAM_DEPENDS_E, CURLOPTTYPE_OBJECTPOINT, 241), + + /* Do not send any tftp option requests to the server */ + CURLOPT(CURLOPT_TFTP_NO_OPTIONS, CURLOPTTYPE_LONG, 242), + + /* Linked-list of host:port:connect-to-host:connect-to-port, + overrides the URL's host:port (only for the network layer) */ + CURLOPT(CURLOPT_CONNECT_TO, CURLOPTTYPE_SLISTPOINT, 243), + + /* Set TCP Fast Open */ + CURLOPT(CURLOPT_TCP_FASTOPEN, CURLOPTTYPE_LONG, 244), + + /* Continue to send data if the server responds early with an + * HTTP status code >= 300 */ + CURLOPT(CURLOPT_KEEP_SENDING_ON_ERROR, CURLOPTTYPE_LONG, 245), + + /* The CApath or CAfile used to validate the proxy certificate + this option is used only if PROXY_SSL_VERIFYPEER is true */ + CURLOPT(CURLOPT_PROXY_CAINFO, CURLOPTTYPE_STRINGPOINT, 246), + + /* The CApath directory used to validate the proxy certificate + this option is used only if PROXY_SSL_VERIFYPEER is true */ + CURLOPT(CURLOPT_PROXY_CAPATH, CURLOPTTYPE_STRINGPOINT, 247), + + /* Set if we should verify the proxy in ssl handshake, + set 1 to verify. */ + CURLOPT(CURLOPT_PROXY_SSL_VERIFYPEER, CURLOPTTYPE_LONG, 248), + + /* Set if we should verify the Common name from the proxy certificate in ssl + * handshake, set 1 to check existence, 2 to ensure that it matches + * the provided hostname. */ + CURLOPT(CURLOPT_PROXY_SSL_VERIFYHOST, CURLOPTTYPE_LONG, 249), + + /* What version to specifically try to use for proxy. + See CURL_SSLVERSION defines below. */ + CURLOPT(CURLOPT_PROXY_SSLVERSION, CURLOPTTYPE_VALUES, 250), + + /* Set a username for authenticated TLS for proxy */ + CURLOPT(CURLOPT_PROXY_TLSAUTH_USERNAME, CURLOPTTYPE_STRINGPOINT, 251), + + /* Set a password for authenticated TLS for proxy */ + CURLOPT(CURLOPT_PROXY_TLSAUTH_PASSWORD, CURLOPTTYPE_STRINGPOINT, 252), + + /* Set authentication type for authenticated TLS for proxy */ + CURLOPT(CURLOPT_PROXY_TLSAUTH_TYPE, CURLOPTTYPE_STRINGPOINT, 253), + + /* name of the file keeping your private SSL-certificate for proxy */ + CURLOPT(CURLOPT_PROXY_SSLCERT, CURLOPTTYPE_STRINGPOINT, 254), + + /* type of the file keeping your SSL-certificate ("DER", "PEM", "ENG") for + proxy */ + CURLOPT(CURLOPT_PROXY_SSLCERTTYPE, CURLOPTTYPE_STRINGPOINT, 255), + + /* name of the file keeping your private SSL-key for proxy */ + CURLOPT(CURLOPT_PROXY_SSLKEY, CURLOPTTYPE_STRINGPOINT, 256), + + /* type of the file keeping your private SSL-key ("DER", "PEM", "ENG") for + proxy */ + CURLOPT(CURLOPT_PROXY_SSLKEYTYPE, CURLOPTTYPE_STRINGPOINT, 257), + + /* password for the SSL private key for proxy */ + CURLOPT(CURLOPT_PROXY_KEYPASSWD, CURLOPTTYPE_STRINGPOINT, 258), + + /* Specify which SSL ciphers to use for proxy */ + CURLOPT(CURLOPT_PROXY_SSL_CIPHER_LIST, CURLOPTTYPE_STRINGPOINT, 259), + + /* CRL file for proxy */ + CURLOPT(CURLOPT_PROXY_CRLFILE, CURLOPTTYPE_STRINGPOINT, 260), + + /* Enable/disable specific SSL features with a bitmask for proxy, see + CURLSSLOPT_* */ + CURLOPT(CURLOPT_PROXY_SSL_OPTIONS, CURLOPTTYPE_LONG, 261), + + /* Name of pre proxy to use. */ + CURLOPT(CURLOPT_PRE_PROXY, CURLOPTTYPE_STRINGPOINT, 262), + + /* The public key in DER form used to validate the proxy public key + this option is used only if PROXY_SSL_VERIFYPEER is true */ + CURLOPT(CURLOPT_PROXY_PINNEDPUBLICKEY, CURLOPTTYPE_STRINGPOINT, 263), + + /* Path to an abstract Unix domain socket */ + CURLOPT(CURLOPT_ABSTRACT_UNIX_SOCKET, CURLOPTTYPE_STRINGPOINT, 264), + + /* Suppress proxy CONNECT response headers from user callbacks */ + CURLOPT(CURLOPT_SUPPRESS_CONNECT_HEADERS, CURLOPTTYPE_LONG, 265), + + /* The request target, instead of extracted from the URL */ + CURLOPT(CURLOPT_REQUEST_TARGET, CURLOPTTYPE_STRINGPOINT, 266), + + /* bitmask of allowed auth methods for connections to SOCKS5 proxies */ + CURLOPT(CURLOPT_SOCKS5_AUTH, CURLOPTTYPE_LONG, 267), + + /* Enable/disable SSH compression */ + CURLOPT(CURLOPT_SSH_COMPRESSION, CURLOPTTYPE_LONG, 268), + + /* Post MIME data. */ + CURLOPT(CURLOPT_MIMEPOST, CURLOPTTYPE_OBJECTPOINT, 269), + + /* Time to use with the CURLOPT_TIMECONDITION. Specified in number of + seconds since 1 Jan 1970. */ + CURLOPT(CURLOPT_TIMEVALUE_LARGE, CURLOPTTYPE_OFF_T, 270), + + /* Head start in milliseconds to give happy eyeballs. */ + CURLOPT(CURLOPT_HAPPY_EYEBALLS_TIMEOUT_MS, CURLOPTTYPE_LONG, 271), + + /* Function that will be called before a resolver request is made */ + CURLOPT(CURLOPT_RESOLVER_START_FUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 272), + + /* User data to pass to the resolver start callback. */ + CURLOPT(CURLOPT_RESOLVER_START_DATA, CURLOPTTYPE_CBPOINT, 273), + + /* send HAProxy PROXY protocol header? */ + CURLOPT(CURLOPT_HAPROXYPROTOCOL, CURLOPTTYPE_LONG, 274), + + /* shuffle addresses before use when DNS returns multiple */ + CURLOPT(CURLOPT_DNS_SHUFFLE_ADDRESSES, CURLOPTTYPE_LONG, 275), + + /* Specify which TLS 1.3 ciphers suites to use */ + CURLOPT(CURLOPT_TLS13_CIPHERS, CURLOPTTYPE_STRINGPOINT, 276), + CURLOPT(CURLOPT_PROXY_TLS13_CIPHERS, CURLOPTTYPE_STRINGPOINT, 277), + + /* Disallow specifying username/login in URL. */ + CURLOPT(CURLOPT_DISALLOW_USERNAME_IN_URL, CURLOPTTYPE_LONG, 278), + + /* DNS-over-HTTPS URL */ + CURLOPT(CURLOPT_DOH_URL, CURLOPTTYPE_STRINGPOINT, 279), + + /* Preferred buffer size to use for uploads */ + CURLOPT(CURLOPT_UPLOAD_BUFFERSIZE, CURLOPTTYPE_LONG, 280), + + /* Time in ms between connection upkeep calls for long-lived connections. */ + CURLOPT(CURLOPT_UPKEEP_INTERVAL_MS, CURLOPTTYPE_LONG, 281), + + /* Specify URL using CURL URL API. */ + CURLOPT(CURLOPT_CURLU, CURLOPTTYPE_OBJECTPOINT, 282), + + /* add trailing data just after no more data is available */ + CURLOPT(CURLOPT_TRAILERFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 283), + + /* pointer to be passed to HTTP_TRAILER_FUNCTION */ + CURLOPT(CURLOPT_TRAILERDATA, CURLOPTTYPE_CBPOINT, 284), + + /* set this to 1L to allow HTTP/0.9 responses or 0L to disallow */ + CURLOPT(CURLOPT_HTTP09_ALLOWED, CURLOPTTYPE_LONG, 285), + + /* alt-svc control bitmask */ + CURLOPT(CURLOPT_ALTSVC_CTRL, CURLOPTTYPE_LONG, 286), + + /* alt-svc cache file name to possibly read from/write to */ + CURLOPT(CURLOPT_ALTSVC, CURLOPTTYPE_STRINGPOINT, 287), + + /* maximum age (idle time) of a connection to consider it for reuse + * (in seconds) */ + CURLOPT(CURLOPT_MAXAGE_CONN, CURLOPTTYPE_LONG, 288), + + /* SASL authorisation identity */ + CURLOPT(CURLOPT_SASL_AUTHZID, CURLOPTTYPE_STRINGPOINT, 289), + + /* allow RCPT TO command to fail for some recipients */ + CURLOPT(CURLOPT_MAIL_RCPT_ALLLOWFAILS, CURLOPTTYPE_LONG, 290), + + /* the private SSL-certificate as a "blob" */ + CURLOPT(CURLOPT_SSLCERT_BLOB, CURLOPTTYPE_BLOB, 291), + CURLOPT(CURLOPT_SSLKEY_BLOB, CURLOPTTYPE_BLOB, 292), + CURLOPT(CURLOPT_PROXY_SSLCERT_BLOB, CURLOPTTYPE_BLOB, 293), + CURLOPT(CURLOPT_PROXY_SSLKEY_BLOB, CURLOPTTYPE_BLOB, 294), + CURLOPT(CURLOPT_ISSUERCERT_BLOB, CURLOPTTYPE_BLOB, 295), + + /* Issuer certificate for proxy */ + CURLOPT(CURLOPT_PROXY_ISSUERCERT, CURLOPTTYPE_STRINGPOINT, 296), + CURLOPT(CURLOPT_PROXY_ISSUERCERT_BLOB, CURLOPTTYPE_BLOB, 297), + + /* the EC curves requested by the TLS client (RFC 8422, 5.1); + * OpenSSL support via 'set_groups'/'set_curves': + * https://www.openssl.org/docs/manmaster/man3/SSL_CTX_set1_groups.html + */ + CURLOPT(CURLOPT_SSL_EC_CURVES, CURLOPTTYPE_STRINGPOINT, 298), + + /* HSTS bitmask */ + CURLOPT(CURLOPT_HSTS_CTRL, CURLOPTTYPE_LONG, 299), + /* HSTS file name */ + CURLOPT(CURLOPT_HSTS, CURLOPTTYPE_STRINGPOINT, 300), + + /* HSTS read callback */ + CURLOPT(CURLOPT_HSTSREADFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 301), + CURLOPT(CURLOPT_HSTSREADDATA, CURLOPTTYPE_CBPOINT, 302), + + /* HSTS write callback */ + CURLOPT(CURLOPT_HSTSWRITEFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 303), + CURLOPT(CURLOPT_HSTSWRITEDATA, CURLOPTTYPE_CBPOINT, 304), + + /* Parameters for V4 signature */ + CURLOPT(CURLOPT_AWS_SIGV4, CURLOPTTYPE_STRINGPOINT, 305), + + /* Same as CURLOPT_SSL_VERIFYPEER but for DoH (DNS-over-HTTPS) servers. */ + CURLOPT(CURLOPT_DOH_SSL_VERIFYPEER, CURLOPTTYPE_LONG, 306), + + /* Same as CURLOPT_SSL_VERIFYHOST but for DoH (DNS-over-HTTPS) servers. */ + CURLOPT(CURLOPT_DOH_SSL_VERIFYHOST, CURLOPTTYPE_LONG, 307), + + /* Same as CURLOPT_SSL_VERIFYSTATUS but for DoH (DNS-over-HTTPS) servers. */ + CURLOPT(CURLOPT_DOH_SSL_VERIFYSTATUS, CURLOPTTYPE_LONG, 308), + + /* The CA certificates as "blob" used to validate the peer certificate + this option is used only if SSL_VERIFYPEER is true */ + CURLOPT(CURLOPT_CAINFO_BLOB, CURLOPTTYPE_BLOB, 309), + + /* The CA certificates as "blob" used to validate the proxy certificate + this option is used only if PROXY_SSL_VERIFYPEER is true */ + CURLOPT(CURLOPT_PROXY_CAINFO_BLOB, CURLOPTTYPE_BLOB, 310), + + /* used by scp/sftp to verify the host's public key */ + CURLOPT(CURLOPT_SSH_HOST_PUBLIC_KEY_SHA256, CURLOPTTYPE_STRINGPOINT, 311), + + /* Function that will be called immediately before the initial request + is made on a connection (after any protocol negotiation step). */ + CURLOPT(CURLOPT_PREREQFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 312), + + /* Data passed to the CURLOPT_PREREQFUNCTION callback */ + CURLOPT(CURLOPT_PREREQDATA, CURLOPTTYPE_CBPOINT, 313), + + /* maximum age (since creation) of a connection to consider it for reuse + * (in seconds) */ + CURLOPT(CURLOPT_MAXLIFETIME_CONN, CURLOPTTYPE_LONG, 314), + + /* Set MIME option flags. */ + CURLOPT(CURLOPT_MIME_OPTIONS, CURLOPTTYPE_LONG, 315), + + CURLOPT_LASTENTRY /* the last unused */ +} CURLoption; + +#ifndef CURL_NO_OLDIES /* define this to test if your app builds with all + the obsolete stuff removed! */ + +/* Backwards compatibility with older names */ +/* These are scheduled to disappear by 2011 */ + +/* This was added in version 7.19.1 */ +#define CURLOPT_POST301 CURLOPT_POSTREDIR + +/* These are scheduled to disappear by 2009 */ + +/* The following were added in 7.17.0 */ +#define CURLOPT_SSLKEYPASSWD CURLOPT_KEYPASSWD +#define CURLOPT_FTPAPPEND CURLOPT_APPEND +#define CURLOPT_FTPLISTONLY CURLOPT_DIRLISTONLY +#define CURLOPT_FTP_SSL CURLOPT_USE_SSL + +/* The following were added earlier */ + +#define CURLOPT_SSLCERTPASSWD CURLOPT_KEYPASSWD +#define CURLOPT_KRB4LEVEL CURLOPT_KRBLEVEL + +#else +/* This is set if CURL_NO_OLDIES is defined at compile-time */ +#undef CURLOPT_DNS_USE_GLOBAL_CACHE /* soon obsolete */ +#endif + + + /* Below here follows defines for the CURLOPT_IPRESOLVE option. If a host + name resolves addresses using more than one IP protocol version, this + option might be handy to force libcurl to use a specific IP version. */ +#define CURL_IPRESOLVE_WHATEVER 0 /* default, uses addresses to all IP + versions that your system allows */ +#define CURL_IPRESOLVE_V4 1 /* uses only IPv4 addresses/connections */ +#define CURL_IPRESOLVE_V6 2 /* uses only IPv6 addresses/connections */ + + /* three convenient "aliases" that follow the name scheme better */ +#define CURLOPT_RTSPHEADER CURLOPT_HTTPHEADER + + /* These enums are for use with the CURLOPT_HTTP_VERSION option. */ +enum { + CURL_HTTP_VERSION_NONE, /* setting this means we don't care, and that we'd + like the library to choose the best possible + for us! */ + CURL_HTTP_VERSION_1_0, /* please use HTTP 1.0 in the request */ + CURL_HTTP_VERSION_1_1, /* please use HTTP 1.1 in the request */ + CURL_HTTP_VERSION_2_0, /* please use HTTP 2 in the request */ + CURL_HTTP_VERSION_2TLS, /* use version 2 for HTTPS, version 1.1 for HTTP */ + CURL_HTTP_VERSION_2_PRIOR_KNOWLEDGE, /* please use HTTP 2 without HTTP/1.1 + Upgrade */ + CURL_HTTP_VERSION_3 = 30, /* Makes use of explicit HTTP/3 without fallback. + Use CURLOPT_ALTSVC to enable HTTP/3 upgrade */ + CURL_HTTP_VERSION_LAST /* *ILLEGAL* http version */ +}; + +/* Convenience definition simple because the name of the version is HTTP/2 and + not 2.0. The 2_0 version of the enum name was set while the version was + still planned to be 2.0 and we stick to it for compatibility. */ +#define CURL_HTTP_VERSION_2 CURL_HTTP_VERSION_2_0 + +/* + * Public API enums for RTSP requests + */ +enum { + CURL_RTSPREQ_NONE, /* first in list */ + CURL_RTSPREQ_OPTIONS, + CURL_RTSPREQ_DESCRIBE, + CURL_RTSPREQ_ANNOUNCE, + CURL_RTSPREQ_SETUP, + CURL_RTSPREQ_PLAY, + CURL_RTSPREQ_PAUSE, + CURL_RTSPREQ_TEARDOWN, + CURL_RTSPREQ_GET_PARAMETER, + CURL_RTSPREQ_SET_PARAMETER, + CURL_RTSPREQ_RECORD, + CURL_RTSPREQ_RECEIVE, + CURL_RTSPREQ_LAST /* last in list */ +}; + + /* These enums are for use with the CURLOPT_NETRC option. */ +enum CURL_NETRC_OPTION { + CURL_NETRC_IGNORED, /* The .netrc will never be read. + * This is the default. */ + CURL_NETRC_OPTIONAL, /* A user:password in the URL will be preferred + * to one in the .netrc. */ + CURL_NETRC_REQUIRED, /* A user:password in the URL will be ignored. + * Unless one is set programmatically, the .netrc + * will be queried. */ + CURL_NETRC_LAST +}; + +enum { + CURL_SSLVERSION_DEFAULT, + CURL_SSLVERSION_TLSv1, /* TLS 1.x */ + CURL_SSLVERSION_SSLv2, + CURL_SSLVERSION_SSLv3, + CURL_SSLVERSION_TLSv1_0, + CURL_SSLVERSION_TLSv1_1, + CURL_SSLVERSION_TLSv1_2, + CURL_SSLVERSION_TLSv1_3, + + CURL_SSLVERSION_LAST /* never use, keep last */ +}; + +enum { + CURL_SSLVERSION_MAX_NONE = 0, + CURL_SSLVERSION_MAX_DEFAULT = (CURL_SSLVERSION_TLSv1 << 16), + CURL_SSLVERSION_MAX_TLSv1_0 = (CURL_SSLVERSION_TLSv1_0 << 16), + CURL_SSLVERSION_MAX_TLSv1_1 = (CURL_SSLVERSION_TLSv1_1 << 16), + CURL_SSLVERSION_MAX_TLSv1_2 = (CURL_SSLVERSION_TLSv1_2 << 16), + CURL_SSLVERSION_MAX_TLSv1_3 = (CURL_SSLVERSION_TLSv1_3 << 16), + + /* never use, keep last */ + CURL_SSLVERSION_MAX_LAST = (CURL_SSLVERSION_LAST << 16) +}; + +enum CURL_TLSAUTH { + CURL_TLSAUTH_NONE, + CURL_TLSAUTH_SRP, + CURL_TLSAUTH_LAST /* never use, keep last */ +}; + +/* symbols to use with CURLOPT_POSTREDIR. + CURL_REDIR_POST_301, CURL_REDIR_POST_302 and CURL_REDIR_POST_303 + can be bitwise ORed so that CURL_REDIR_POST_301 | CURL_REDIR_POST_302 + | CURL_REDIR_POST_303 == CURL_REDIR_POST_ALL */ + +#define CURL_REDIR_GET_ALL 0 +#define CURL_REDIR_POST_301 1 +#define CURL_REDIR_POST_302 2 +#define CURL_REDIR_POST_303 4 +#define CURL_REDIR_POST_ALL \ + (CURL_REDIR_POST_301|CURL_REDIR_POST_302|CURL_REDIR_POST_303) + +typedef enum { + CURL_TIMECOND_NONE, + + CURL_TIMECOND_IFMODSINCE, + CURL_TIMECOND_IFUNMODSINCE, + CURL_TIMECOND_LASTMOD, + + CURL_TIMECOND_LAST +} curl_TimeCond; + +/* Special size_t value signaling a null-terminated string. */ +#define CURL_ZERO_TERMINATED ((size_t) -1) + +/* curl_strequal() and curl_strnequal() are subject for removal in a future + release */ +CURL_EXTERN int curl_strequal(const char *s1, const char *s2); +CURL_EXTERN int curl_strnequal(const char *s1, const char *s2, size_t n); + +/* Mime/form handling support. */ +typedef struct curl_mime curl_mime; /* Mime context. */ +typedef struct curl_mimepart curl_mimepart; /* Mime part context. */ + +/* CURLMIMEOPT_ defines are for the CURLOPT_MIME_OPTIONS option. */ +#define CURLMIMEOPT_FORMESCAPE (1<<0) /* Use backslash-escaping for forms. */ + +/* + * NAME curl_mime_init() + * + * DESCRIPTION + * + * Create a mime context and return its handle. The easy parameter is the + * target handle. + */ +CURL_EXTERN curl_mime *curl_mime_init(CURL *easy); + +/* + * NAME curl_mime_free() + * + * DESCRIPTION + * + * release a mime handle and its substructures. + */ +CURL_EXTERN void curl_mime_free(curl_mime *mime); + +/* + * NAME curl_mime_addpart() + * + * DESCRIPTION + * + * Append a new empty part to the given mime context and return a handle to + * the created part. + */ +CURL_EXTERN curl_mimepart *curl_mime_addpart(curl_mime *mime); + +/* + * NAME curl_mime_name() + * + * DESCRIPTION + * + * Set mime/form part name. + */ +CURL_EXTERN CURLcode curl_mime_name(curl_mimepart *part, const char *name); + +/* + * NAME curl_mime_filename() + * + * DESCRIPTION + * + * Set mime part remote file name. + */ +CURL_EXTERN CURLcode curl_mime_filename(curl_mimepart *part, + const char *filename); + +/* + * NAME curl_mime_type() + * + * DESCRIPTION + * + * Set mime part type. + */ +CURL_EXTERN CURLcode curl_mime_type(curl_mimepart *part, const char *mimetype); + +/* + * NAME curl_mime_encoder() + * + * DESCRIPTION + * + * Set mime data transfer encoder. + */ +CURL_EXTERN CURLcode curl_mime_encoder(curl_mimepart *part, + const char *encoding); + +/* + * NAME curl_mime_data() + * + * DESCRIPTION + * + * Set mime part data source from memory data, + */ +CURL_EXTERN CURLcode curl_mime_data(curl_mimepart *part, + const char *data, size_t datasize); + +/* + * NAME curl_mime_filedata() + * + * DESCRIPTION + * + * Set mime part data source from named file. + */ +CURL_EXTERN CURLcode curl_mime_filedata(curl_mimepart *part, + const char *filename); + +/* + * NAME curl_mime_data_cb() + * + * DESCRIPTION + * + * Set mime part data source from callback function. + */ +CURL_EXTERN CURLcode curl_mime_data_cb(curl_mimepart *part, + curl_off_t datasize, + curl_read_callback readfunc, + curl_seek_callback seekfunc, + curl_free_callback freefunc, + void *arg); + +/* + * NAME curl_mime_subparts() + * + * DESCRIPTION + * + * Set mime part data source from subparts. + */ +CURL_EXTERN CURLcode curl_mime_subparts(curl_mimepart *part, + curl_mime *subparts); +/* + * NAME curl_mime_headers() + * + * DESCRIPTION + * + * Set mime part headers. + */ +CURL_EXTERN CURLcode curl_mime_headers(curl_mimepart *part, + struct curl_slist *headers, + int take_ownership); + +typedef enum { + CURLFORM_NOTHING, /********* the first one is unused ************/ + CURLFORM_COPYNAME, + CURLFORM_PTRNAME, + CURLFORM_NAMELENGTH, + CURLFORM_COPYCONTENTS, + CURLFORM_PTRCONTENTS, + CURLFORM_CONTENTSLENGTH, + CURLFORM_FILECONTENT, + CURLFORM_ARRAY, + CURLFORM_OBSOLETE, + CURLFORM_FILE, + + CURLFORM_BUFFER, + CURLFORM_BUFFERPTR, + CURLFORM_BUFFERLENGTH, + + CURLFORM_CONTENTTYPE, + CURLFORM_CONTENTHEADER, + CURLFORM_FILENAME, + CURLFORM_END, + CURLFORM_OBSOLETE2, + + CURLFORM_STREAM, + CURLFORM_CONTENTLEN, /* added in 7.46.0, provide a curl_off_t length */ + + CURLFORM_LASTENTRY /* the last unused */ +} CURLformoption; + +/* structure to be used as parameter for CURLFORM_ARRAY */ +struct curl_forms { + CURLformoption option; + const char *value; +}; + +/* use this for multipart formpost building */ +/* Returns code for curl_formadd() + * + * Returns: + * CURL_FORMADD_OK on success + * CURL_FORMADD_MEMORY if the FormInfo allocation fails + * CURL_FORMADD_OPTION_TWICE if one option is given twice for one Form + * CURL_FORMADD_NULL if a null pointer was given for a char + * CURL_FORMADD_MEMORY if the allocation of a FormInfo struct failed + * CURL_FORMADD_UNKNOWN_OPTION if an unknown option was used + * CURL_FORMADD_INCOMPLETE if the some FormInfo is not complete (or error) + * CURL_FORMADD_MEMORY if a curl_httppost struct cannot be allocated + * CURL_FORMADD_MEMORY if some allocation for string copying failed. + * CURL_FORMADD_ILLEGAL_ARRAY if an illegal option is used in an array + * + ***************************************************************************/ +typedef enum { + CURL_FORMADD_OK, /* first, no error */ + + CURL_FORMADD_MEMORY, + CURL_FORMADD_OPTION_TWICE, + CURL_FORMADD_NULL, + CURL_FORMADD_UNKNOWN_OPTION, + CURL_FORMADD_INCOMPLETE, + CURL_FORMADD_ILLEGAL_ARRAY, + CURL_FORMADD_DISABLED, /* libcurl was built with this disabled */ + + CURL_FORMADD_LAST /* last */ +} CURLFORMcode; + +/* + * NAME curl_formadd() + * + * DESCRIPTION + * + * Pretty advanced function for building multi-part formposts. Each invoke + * adds one part that together construct a full post. Then use + * CURLOPT_HTTPPOST to send it off to libcurl. + */ +CURL_EXTERN CURLFORMcode curl_formadd(struct curl_httppost **httppost, + struct curl_httppost **last_post, + ...); + +/* + * callback function for curl_formget() + * The void *arg pointer will be the one passed as second argument to + * curl_formget(). + * The character buffer passed to it must not be freed. + * Should return the buffer length passed to it as the argument "len" on + * success. + */ +typedef size_t (*curl_formget_callback)(void *arg, const char *buf, + size_t len); + +/* + * NAME curl_formget() + * + * DESCRIPTION + * + * Serialize a curl_httppost struct built with curl_formadd(). + * Accepts a void pointer as second argument which will be passed to + * the curl_formget_callback function. + * Returns 0 on success. + */ +CURL_EXTERN int curl_formget(struct curl_httppost *form, void *arg, + curl_formget_callback append); +/* + * NAME curl_formfree() + * + * DESCRIPTION + * + * Free a multipart formpost previously built with curl_formadd(). + */ +CURL_EXTERN void curl_formfree(struct curl_httppost *form); + +/* + * NAME curl_getenv() + * + * DESCRIPTION + * + * Returns a malloc()'ed string that MUST be curl_free()ed after usage is + * complete. DEPRECATED - see lib/README.curlx + */ +CURL_EXTERN char *curl_getenv(const char *variable); + +/* + * NAME curl_version() + * + * DESCRIPTION + * + * Returns a static ascii string of the libcurl version. + */ +CURL_EXTERN char *curl_version(void); + +/* + * NAME curl_easy_escape() + * + * DESCRIPTION + * + * Escapes URL strings (converts all letters consider illegal in URLs to their + * %XX versions). This function returns a new allocated string or NULL if an + * error occurred. + */ +CURL_EXTERN char *curl_easy_escape(CURL *handle, + const char *string, + int length); + +/* the previous version: */ +CURL_EXTERN char *curl_escape(const char *string, + int length); + + +/* + * NAME curl_easy_unescape() + * + * DESCRIPTION + * + * Unescapes URL encoding in strings (converts all %XX codes to their 8bit + * versions). This function returns a new allocated string or NULL if an error + * occurred. + * Conversion Note: On non-ASCII platforms the ASCII %XX codes are + * converted into the host encoding. + */ +CURL_EXTERN char *curl_easy_unescape(CURL *handle, + const char *string, + int length, + int *outlength); + +/* the previous version */ +CURL_EXTERN char *curl_unescape(const char *string, + int length); + +/* + * NAME curl_free() + * + * DESCRIPTION + * + * Provided for de-allocation in the same translation unit that did the + * allocation. Added in libcurl 7.10 + */ +CURL_EXTERN void curl_free(void *p); + +/* + * NAME curl_global_init() + * + * DESCRIPTION + * + * curl_global_init() should be invoked exactly once for each application that + * uses libcurl and before any call of other libcurl functions. + * + * This function is not thread-safe! + */ +CURL_EXTERN CURLcode curl_global_init(long flags); + +/* + * NAME curl_global_init_mem() + * + * DESCRIPTION + * + * curl_global_init() or curl_global_init_mem() should be invoked exactly once + * for each application that uses libcurl. This function can be used to + * initialize libcurl and set user defined memory management callback + * functions. Users can implement memory management routines to check for + * memory leaks, check for mis-use of the curl library etc. User registered + * callback routines will be invoked by this library instead of the system + * memory management routines like malloc, free etc. + */ +CURL_EXTERN CURLcode curl_global_init_mem(long flags, + curl_malloc_callback m, + curl_free_callback f, + curl_realloc_callback r, + curl_strdup_callback s, + curl_calloc_callback c); + +/* + * NAME curl_global_cleanup() + * + * DESCRIPTION + * + * curl_global_cleanup() should be invoked exactly once for each application + * that uses libcurl + */ +CURL_EXTERN void curl_global_cleanup(void); + +/* linked-list structure for the CURLOPT_QUOTE option (and other) */ +struct curl_slist { + char *data; + struct curl_slist *next; +}; + +/* + * NAME curl_global_sslset() + * + * DESCRIPTION + * + * When built with multiple SSL backends, curl_global_sslset() allows to + * choose one. This function can only be called once, and it must be called + * *before* curl_global_init(). + * + * The backend can be identified by the id (e.g. CURLSSLBACKEND_OPENSSL). The + * backend can also be specified via the name parameter (passing -1 as id). + * If both id and name are specified, the name will be ignored. If neither id + * nor name are specified, the function will fail with + * CURLSSLSET_UNKNOWN_BACKEND and set the "avail" pointer to the + * NULL-terminated list of available backends. + * + * Upon success, the function returns CURLSSLSET_OK. + * + * If the specified SSL backend is not available, the function returns + * CURLSSLSET_UNKNOWN_BACKEND and sets the "avail" pointer to a NULL-terminated + * list of available SSL backends. + * + * The SSL backend can be set only once. If it has already been set, a + * subsequent attempt to change it will result in a CURLSSLSET_TOO_LATE. + */ + +struct curl_ssl_backend { + curl_sslbackend id; + const char *name; +}; +typedef struct curl_ssl_backend curl_ssl_backend; + +typedef enum { + CURLSSLSET_OK = 0, + CURLSSLSET_UNKNOWN_BACKEND, + CURLSSLSET_TOO_LATE, + CURLSSLSET_NO_BACKENDS /* libcurl was built without any SSL support */ +} CURLsslset; + +CURL_EXTERN CURLsslset curl_global_sslset(curl_sslbackend id, const char *name, + const curl_ssl_backend ***avail); + +/* + * NAME curl_slist_append() + * + * DESCRIPTION + * + * Appends a string to a linked list. If no list exists, it will be created + * first. Returns the new list, after appending. + */ +CURL_EXTERN struct curl_slist *curl_slist_append(struct curl_slist *, + const char *); + +/* + * NAME curl_slist_free_all() + * + * DESCRIPTION + * + * free a previously built curl_slist. + */ +CURL_EXTERN void curl_slist_free_all(struct curl_slist *); + +/* + * NAME curl_getdate() + * + * DESCRIPTION + * + * Returns the time, in seconds since 1 Jan 1970 of the time string given in + * the first argument. The time argument in the second parameter is unused + * and should be set to NULL. + */ +CURL_EXTERN time_t curl_getdate(const char *p, const time_t *unused); + +/* info about the certificate chain, only for OpenSSL, GnuTLS, Schannel, NSS + and GSKit builds. Asked for with CURLOPT_CERTINFO / CURLINFO_CERTINFO */ +struct curl_certinfo { + int num_of_certs; /* number of certificates with information */ + struct curl_slist **certinfo; /* for each index in this array, there's a + linked list with textual information in the + format "name: value" */ +}; + +/* Information about the SSL library used and the respective internal SSL + handle, which can be used to obtain further information regarding the + connection. Asked for with CURLINFO_TLS_SSL_PTR or CURLINFO_TLS_SESSION. */ +struct curl_tlssessioninfo { + curl_sslbackend backend; + void *internals; +}; + +#define CURLINFO_STRING 0x100000 +#define CURLINFO_LONG 0x200000 +#define CURLINFO_DOUBLE 0x300000 +#define CURLINFO_SLIST 0x400000 +#define CURLINFO_PTR 0x400000 /* same as SLIST */ +#define CURLINFO_SOCKET 0x500000 +#define CURLINFO_OFF_T 0x600000 +#define CURLINFO_MASK 0x0fffff +#define CURLINFO_TYPEMASK 0xf00000 + +typedef enum { + CURLINFO_NONE, /* first, never use this */ + CURLINFO_EFFECTIVE_URL = CURLINFO_STRING + 1, + CURLINFO_RESPONSE_CODE = CURLINFO_LONG + 2, + CURLINFO_TOTAL_TIME = CURLINFO_DOUBLE + 3, + CURLINFO_NAMELOOKUP_TIME = CURLINFO_DOUBLE + 4, + CURLINFO_CONNECT_TIME = CURLINFO_DOUBLE + 5, + CURLINFO_PRETRANSFER_TIME = CURLINFO_DOUBLE + 6, + CURLINFO_SIZE_UPLOAD = CURLINFO_DOUBLE + 7, + CURLINFO_SIZE_UPLOAD_T = CURLINFO_OFF_T + 7, + CURLINFO_SIZE_DOWNLOAD = CURLINFO_DOUBLE + 8, + CURLINFO_SIZE_DOWNLOAD_T = CURLINFO_OFF_T + 8, + CURLINFO_SPEED_DOWNLOAD = CURLINFO_DOUBLE + 9, + CURLINFO_SPEED_DOWNLOAD_T = CURLINFO_OFF_T + 9, + CURLINFO_SPEED_UPLOAD = CURLINFO_DOUBLE + 10, + CURLINFO_SPEED_UPLOAD_T = CURLINFO_OFF_T + 10, + CURLINFO_HEADER_SIZE = CURLINFO_LONG + 11, + CURLINFO_REQUEST_SIZE = CURLINFO_LONG + 12, + CURLINFO_SSL_VERIFYRESULT = CURLINFO_LONG + 13, + CURLINFO_FILETIME = CURLINFO_LONG + 14, + CURLINFO_FILETIME_T = CURLINFO_OFF_T + 14, + CURLINFO_CONTENT_LENGTH_DOWNLOAD = CURLINFO_DOUBLE + 15, + CURLINFO_CONTENT_LENGTH_DOWNLOAD_T = CURLINFO_OFF_T + 15, + CURLINFO_CONTENT_LENGTH_UPLOAD = CURLINFO_DOUBLE + 16, + CURLINFO_CONTENT_LENGTH_UPLOAD_T = CURLINFO_OFF_T + 16, + CURLINFO_STARTTRANSFER_TIME = CURLINFO_DOUBLE + 17, + CURLINFO_CONTENT_TYPE = CURLINFO_STRING + 18, + CURLINFO_REDIRECT_TIME = CURLINFO_DOUBLE + 19, + CURLINFO_REDIRECT_COUNT = CURLINFO_LONG + 20, + CURLINFO_PRIVATE = CURLINFO_STRING + 21, + CURLINFO_HTTP_CONNECTCODE = CURLINFO_LONG + 22, + CURLINFO_HTTPAUTH_AVAIL = CURLINFO_LONG + 23, + CURLINFO_PROXYAUTH_AVAIL = CURLINFO_LONG + 24, + CURLINFO_OS_ERRNO = CURLINFO_LONG + 25, + CURLINFO_NUM_CONNECTS = CURLINFO_LONG + 26, + CURLINFO_SSL_ENGINES = CURLINFO_SLIST + 27, + CURLINFO_COOKIELIST = CURLINFO_SLIST + 28, + CURLINFO_LASTSOCKET = CURLINFO_LONG + 29, + CURLINFO_FTP_ENTRY_PATH = CURLINFO_STRING + 30, + CURLINFO_REDIRECT_URL = CURLINFO_STRING + 31, + CURLINFO_PRIMARY_IP = CURLINFO_STRING + 32, + CURLINFO_APPCONNECT_TIME = CURLINFO_DOUBLE + 33, + CURLINFO_CERTINFO = CURLINFO_PTR + 34, + CURLINFO_CONDITION_UNMET = CURLINFO_LONG + 35, + CURLINFO_RTSP_SESSION_ID = CURLINFO_STRING + 36, + CURLINFO_RTSP_CLIENT_CSEQ = CURLINFO_LONG + 37, + CURLINFO_RTSP_SERVER_CSEQ = CURLINFO_LONG + 38, + CURLINFO_RTSP_CSEQ_RECV = CURLINFO_LONG + 39, + CURLINFO_PRIMARY_PORT = CURLINFO_LONG + 40, + CURLINFO_LOCAL_IP = CURLINFO_STRING + 41, + CURLINFO_LOCAL_PORT = CURLINFO_LONG + 42, + CURLINFO_TLS_SESSION = CURLINFO_PTR + 43, + CURLINFO_ACTIVESOCKET = CURLINFO_SOCKET + 44, + CURLINFO_TLS_SSL_PTR = CURLINFO_PTR + 45, + CURLINFO_HTTP_VERSION = CURLINFO_LONG + 46, + CURLINFO_PROXY_SSL_VERIFYRESULT = CURLINFO_LONG + 47, + CURLINFO_PROTOCOL = CURLINFO_LONG + 48, + CURLINFO_SCHEME = CURLINFO_STRING + 49, + CURLINFO_TOTAL_TIME_T = CURLINFO_OFF_T + 50, + CURLINFO_NAMELOOKUP_TIME_T = CURLINFO_OFF_T + 51, + CURLINFO_CONNECT_TIME_T = CURLINFO_OFF_T + 52, + CURLINFO_PRETRANSFER_TIME_T = CURLINFO_OFF_T + 53, + CURLINFO_STARTTRANSFER_TIME_T = CURLINFO_OFF_T + 54, + CURLINFO_REDIRECT_TIME_T = CURLINFO_OFF_T + 55, + CURLINFO_APPCONNECT_TIME_T = CURLINFO_OFF_T + 56, + CURLINFO_RETRY_AFTER = CURLINFO_OFF_T + 57, + CURLINFO_EFFECTIVE_METHOD = CURLINFO_STRING + 58, + CURLINFO_PROXY_ERROR = CURLINFO_LONG + 59, + CURLINFO_REFERER = CURLINFO_STRING + 60, + + CURLINFO_LASTONE = 60 +} CURLINFO; + +/* CURLINFO_RESPONSE_CODE is the new name for the option previously known as + CURLINFO_HTTP_CODE */ +#define CURLINFO_HTTP_CODE CURLINFO_RESPONSE_CODE + +typedef enum { + CURLCLOSEPOLICY_NONE, /* first, never use this */ + + CURLCLOSEPOLICY_OLDEST, + CURLCLOSEPOLICY_LEAST_RECENTLY_USED, + CURLCLOSEPOLICY_LEAST_TRAFFIC, + CURLCLOSEPOLICY_SLOWEST, + CURLCLOSEPOLICY_CALLBACK, + + CURLCLOSEPOLICY_LAST /* last, never use this */ +} curl_closepolicy; + +#define CURL_GLOBAL_SSL (1<<0) /* no purpose since since 7.57.0 */ +#define CURL_GLOBAL_WIN32 (1<<1) +#define CURL_GLOBAL_ALL (CURL_GLOBAL_SSL|CURL_GLOBAL_WIN32) +#define CURL_GLOBAL_NOTHING 0 +#define CURL_GLOBAL_DEFAULT CURL_GLOBAL_ALL +#define CURL_GLOBAL_ACK_EINTR (1<<2) + + +/***************************************************************************** + * Setup defines, protos etc for the sharing stuff. + */ + +/* Different data locks for a single share */ +typedef enum { + CURL_LOCK_DATA_NONE = 0, + /* CURL_LOCK_DATA_SHARE is used internally to say that + * the locking is just made to change the internal state of the share + * itself. + */ + CURL_LOCK_DATA_SHARE, + CURL_LOCK_DATA_COOKIE, + CURL_LOCK_DATA_DNS, + CURL_LOCK_DATA_SSL_SESSION, + CURL_LOCK_DATA_CONNECT, + CURL_LOCK_DATA_PSL, + CURL_LOCK_DATA_LAST +} curl_lock_data; + +/* Different lock access types */ +typedef enum { + CURL_LOCK_ACCESS_NONE = 0, /* unspecified action */ + CURL_LOCK_ACCESS_SHARED = 1, /* for read perhaps */ + CURL_LOCK_ACCESS_SINGLE = 2, /* for write perhaps */ + CURL_LOCK_ACCESS_LAST /* never use */ +} curl_lock_access; + +typedef void (*curl_lock_function)(CURL *handle, + curl_lock_data data, + curl_lock_access locktype, + void *userptr); +typedef void (*curl_unlock_function)(CURL *handle, + curl_lock_data data, + void *userptr); + + +typedef enum { + CURLSHE_OK, /* all is fine */ + CURLSHE_BAD_OPTION, /* 1 */ + CURLSHE_IN_USE, /* 2 */ + CURLSHE_INVALID, /* 3 */ + CURLSHE_NOMEM, /* 4 out of memory */ + CURLSHE_NOT_BUILT_IN, /* 5 feature not present in lib */ + CURLSHE_LAST /* never use */ +} CURLSHcode; + +typedef enum { + CURLSHOPT_NONE, /* don't use */ + CURLSHOPT_SHARE, /* specify a data type to share */ + CURLSHOPT_UNSHARE, /* specify which data type to stop sharing */ + CURLSHOPT_LOCKFUNC, /* pass in a 'curl_lock_function' pointer */ + CURLSHOPT_UNLOCKFUNC, /* pass in a 'curl_unlock_function' pointer */ + CURLSHOPT_USERDATA, /* pass in a user data pointer used in the lock/unlock + callback functions */ + CURLSHOPT_LAST /* never use */ +} CURLSHoption; + +CURL_EXTERN CURLSH *curl_share_init(void); +CURL_EXTERN CURLSHcode curl_share_setopt(CURLSH *, CURLSHoption option, ...); +CURL_EXTERN CURLSHcode curl_share_cleanup(CURLSH *); + +/**************************************************************************** + * Structures for querying information about the curl library at runtime. + */ + +typedef enum { + CURLVERSION_FIRST, + CURLVERSION_SECOND, + CURLVERSION_THIRD, + CURLVERSION_FOURTH, + CURLVERSION_FIFTH, + CURLVERSION_SIXTH, + CURLVERSION_SEVENTH, + CURLVERSION_EIGHTH, + CURLVERSION_NINTH, + CURLVERSION_TENTH, + CURLVERSION_LAST /* never actually use this */ +} CURLversion; + +/* The 'CURLVERSION_NOW' is the symbolic name meant to be used by + basically all programs ever that want to get version information. It is + meant to be a built-in version number for what kind of struct the caller + expects. If the struct ever changes, we redefine the NOW to another enum + from above. */ +#define CURLVERSION_NOW CURLVERSION_TENTH + +struct curl_version_info_data { + CURLversion age; /* age of the returned struct */ + const char *version; /* LIBCURL_VERSION */ + unsigned int version_num; /* LIBCURL_VERSION_NUM */ + const char *host; /* OS/host/cpu/machine when configured */ + int features; /* bitmask, see defines below */ + const char *ssl_version; /* human readable string */ + long ssl_version_num; /* not used anymore, always 0 */ + const char *libz_version; /* human readable string */ + /* protocols is terminated by an entry with a NULL protoname */ + const char * const *protocols; + + /* The fields below this were added in CURLVERSION_SECOND */ + const char *ares; + int ares_num; + + /* This field was added in CURLVERSION_THIRD */ + const char *libidn; + + /* These field were added in CURLVERSION_FOURTH */ + + /* Same as '_libiconv_version' if built with HAVE_ICONV */ + int iconv_ver_num; + + const char *libssh_version; /* human readable string */ + + /* These fields were added in CURLVERSION_FIFTH */ + unsigned int brotli_ver_num; /* Numeric Brotli version + (MAJOR << 24) | (MINOR << 12) | PATCH */ + const char *brotli_version; /* human readable string. */ + + /* These fields were added in CURLVERSION_SIXTH */ + unsigned int nghttp2_ver_num; /* Numeric nghttp2 version + (MAJOR << 16) | (MINOR << 8) | PATCH */ + const char *nghttp2_version; /* human readable string. */ + const char *quic_version; /* human readable quic (+ HTTP/3) library + + version or NULL */ + + /* These fields were added in CURLVERSION_SEVENTH */ + const char *cainfo; /* the built-in default CURLOPT_CAINFO, might + be NULL */ + const char *capath; /* the built-in default CURLOPT_CAPATH, might + be NULL */ + + /* These fields were added in CURLVERSION_EIGHTH */ + unsigned int zstd_ver_num; /* Numeric Zstd version + (MAJOR << 24) | (MINOR << 12) | PATCH */ + const char *zstd_version; /* human readable string. */ + + /* These fields were added in CURLVERSION_NINTH */ + const char *hyper_version; /* human readable string. */ + + /* These fields were added in CURLVERSION_TENTH */ + const char *gsasl_version; /* human readable string. */ +}; +typedef struct curl_version_info_data curl_version_info_data; + +#define CURL_VERSION_IPV6 (1<<0) /* IPv6-enabled */ +#define CURL_VERSION_KERBEROS4 (1<<1) /* Kerberos V4 auth is supported + (deprecated) */ +#define CURL_VERSION_SSL (1<<2) /* SSL options are present */ +#define CURL_VERSION_LIBZ (1<<3) /* libz features are present */ +#define CURL_VERSION_NTLM (1<<4) /* NTLM auth is supported */ +#define CURL_VERSION_GSSNEGOTIATE (1<<5) /* Negotiate auth is supported + (deprecated) */ +#define CURL_VERSION_DEBUG (1<<6) /* Built with debug capabilities */ +#define CURL_VERSION_ASYNCHDNS (1<<7) /* Asynchronous DNS resolves */ +#define CURL_VERSION_SPNEGO (1<<8) /* SPNEGO auth is supported */ +#define CURL_VERSION_LARGEFILE (1<<9) /* Supports files larger than 2GB */ +#define CURL_VERSION_IDN (1<<10) /* Internationized Domain Names are + supported */ +#define CURL_VERSION_SSPI (1<<11) /* Built against Windows SSPI */ +#define CURL_VERSION_CONV (1<<12) /* Character conversions supported */ +#define CURL_VERSION_CURLDEBUG (1<<13) /* Debug memory tracking supported */ +#define CURL_VERSION_TLSAUTH_SRP (1<<14) /* TLS-SRP auth is supported */ +#define CURL_VERSION_NTLM_WB (1<<15) /* NTLM delegation to winbind helper + is supported */ +#define CURL_VERSION_HTTP2 (1<<16) /* HTTP2 support built-in */ +#define CURL_VERSION_GSSAPI (1<<17) /* Built against a GSS-API library */ +#define CURL_VERSION_KERBEROS5 (1<<18) /* Kerberos V5 auth is supported */ +#define CURL_VERSION_UNIX_SOCKETS (1<<19) /* Unix domain sockets support */ +#define CURL_VERSION_PSL (1<<20) /* Mozilla's Public Suffix List, used + for cookie domain verification */ +#define CURL_VERSION_HTTPS_PROXY (1<<21) /* HTTPS-proxy support built-in */ +#define CURL_VERSION_MULTI_SSL (1<<22) /* Multiple SSL backends available */ +#define CURL_VERSION_BROTLI (1<<23) /* Brotli features are present. */ +#define CURL_VERSION_ALTSVC (1<<24) /* Alt-Svc handling built-in */ +#define CURL_VERSION_HTTP3 (1<<25) /* HTTP3 support built-in */ +#define CURL_VERSION_ZSTD (1<<26) /* zstd features are present */ +#define CURL_VERSION_UNICODE (1<<27) /* Unicode support on Windows */ +#define CURL_VERSION_HSTS (1<<28) /* HSTS is supported */ +#define CURL_VERSION_GSASL (1<<29) /* libgsasl is supported */ + + /* + * NAME curl_version_info() + * + * DESCRIPTION + * + * This function returns a pointer to a static copy of the version info + * struct. See above. + */ +CURL_EXTERN curl_version_info_data *curl_version_info(CURLversion); + +/* + * NAME curl_easy_strerror() + * + * DESCRIPTION + * + * The curl_easy_strerror function may be used to turn a CURLcode value + * into the equivalent human readable error string. This is useful + * for printing meaningful error messages. + */ +CURL_EXTERN const char *curl_easy_strerror(CURLcode); + +/* + * NAME curl_share_strerror() + * + * DESCRIPTION + * + * The curl_share_strerror function may be used to turn a CURLSHcode value + * into the equivalent human readable error string. This is useful + * for printing meaningful error messages. + */ +CURL_EXTERN const char *curl_share_strerror(CURLSHcode); + +/* + * NAME curl_easy_pause() + * + * DESCRIPTION + * + * The curl_easy_pause function pauses or unpauses transfers. Select the new + * state by setting the bitmask, use the convenience defines below. + * + */ +CURL_EXTERN CURLcode curl_easy_pause(CURL *handle, int bitmask); + +#define CURLPAUSE_RECV (1<<0) +#define CURLPAUSE_RECV_CONT (0) + +#define CURLPAUSE_SEND (1<<2) +#define CURLPAUSE_SEND_CONT (0) + +#define CURLPAUSE_ALL (CURLPAUSE_RECV|CURLPAUSE_SEND) +#define CURLPAUSE_CONT (CURLPAUSE_RECV_CONT|CURLPAUSE_SEND_CONT) + +#ifdef __cplusplus +} +#endif + +/* unfortunately, the easy.h and multi.h include files need options and info + stuff before they can be included! */ +#include "easy.h" /* nothing in curl is fun without the easy stuff */ +#include "multi.h" +#include "urlapi.h" +#include "options.h" + +/* the typechecker doesn't work in C++ (yet) */ +#if defined(__GNUC__) && defined(__GNUC_MINOR__) && \ + ((__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 3)) && \ + !defined(__cplusplus) && !defined(CURL_DISABLE_TYPECHECK) +#include "typecheck-gcc.h" +#else +#if defined(__STDC__) && (__STDC__ >= 1) +/* This preprocessor magic that replaces a call with the exact same call is + only done to make sure application authors pass exactly three arguments + to these functions. */ +#define curl_easy_setopt(handle,opt,param) curl_easy_setopt(handle,opt,param) +#define curl_easy_getinfo(handle,info,arg) curl_easy_getinfo(handle,info,arg) +#define curl_share_setopt(share,opt,param) curl_share_setopt(share,opt,param) +#define curl_multi_setopt(handle,opt,param) curl_multi_setopt(handle,opt,param) +#endif /* __STDC__ >= 1 */ +#endif /* gcc >= 4.3 && !__cplusplus */ + +#endif /* CURLINC_CURL_H */ diff --git a/NorthstarDedicatedTest/include/libcurl/include/curl/curlver.h b/NorthstarDedicatedTest/include/libcurl/include/curl/curlver.h new file mode 100644 index 00000000..fe57e430 --- /dev/null +++ b/NorthstarDedicatedTest/include/libcurl/include/curl/curlver.h @@ -0,0 +1,77 @@ +#ifndef CURLINC_CURLVER_H +#define CURLINC_CURLVER_H +/*************************************************************************** + * _ _ ____ _ + * Project ___| | | | _ \| | + * / __| | | | |_) | | + * | (__| |_| | _ <| |___ + * \___|\___/|_| \_\_____| + * + * Copyright (C) 1998 - 2021, Daniel Stenberg, <daniel@haxx.se>, et al. + * + * This software is licensed as described in the file COPYING, which + * you should have received as part of this distribution. The terms + * are also available at https://curl.se/docs/copyright.html. + * + * You may opt to use, copy, modify, merge, publish, distribute and/or sell + * copies of the Software, and permit persons to whom the Software is + * furnished to do so, under the terms of the COPYING file. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + ***************************************************************************/ + +/* This header file contains nothing but libcurl version info, generated by + a script at release-time. This was made its own header file in 7.11.2 */ + +/* This is the global package copyright */ +#define LIBCURL_COPYRIGHT "1996 - 2021 Daniel Stenberg, <daniel@haxx.se>." + +/* This is the version number of the libcurl package from which this header + file origins: */ +#define LIBCURL_VERSION "7.81.0-DEV" + +/* The numeric version number is also available "in parts" by using these + defines: */ +#define LIBCURL_VERSION_MAJOR 7 +#define LIBCURL_VERSION_MINOR 81 +#define LIBCURL_VERSION_PATCH 0 + +/* This is the numeric version of the libcurl version number, meant for easier + parsing and comparisons by programs. The LIBCURL_VERSION_NUM define will + always follow this syntax: + + 0xXXYYZZ + + Where XX, YY and ZZ are the main version, release and patch numbers in + hexadecimal (using 8 bits each). All three numbers are always represented + using two digits. 1.2 would appear as "0x010200" while version 9.11.7 + appears as "0x090b07". + + This 6-digit (24 bits) hexadecimal number does not show pre-release number, + and it is always a greater number in a more recent release. It makes + comparisons with greater than and less than work. + + Note: This define is the full hex number and _does not_ use the + CURL_VERSION_BITS() macro since curl's own configure script greps for it + and needs it to contain the full number. +*/ +#define LIBCURL_VERSION_NUM 0x075100 + +/* + * This is the date and time when the full source package was created. The + * timestamp is not stored in git, as the timestamp is properly set in the + * tarballs by the maketgz script. + * + * The format of the date follows this template: + * + * "2007-11-23" + */ +#define LIBCURL_TIMESTAMP "[unreleased]" + +#define CURL_VERSION_BITS(x,y,z) ((x)<<16|(y)<<8|(z)) +#define CURL_AT_LEAST_VERSION(x,y,z) \ + (LIBCURL_VERSION_NUM >= CURL_VERSION_BITS(x, y, z)) + +#endif /* CURLINC_CURLVER_H */ diff --git a/NorthstarDedicatedTest/include/libcurl/include/curl/easy.h b/NorthstarDedicatedTest/include/libcurl/include/curl/easy.h new file mode 100644 index 00000000..2dbfb26b --- /dev/null +++ b/NorthstarDedicatedTest/include/libcurl/include/curl/easy.h @@ -0,0 +1,123 @@ +#ifndef CURLINC_EASY_H +#define CURLINC_EASY_H +/*************************************************************************** + * _ _ ____ _ + * Project ___| | | | _ \| | + * / __| | | | |_) | | + * | (__| |_| | _ <| |___ + * \___|\___/|_| \_\_____| + * + * Copyright (C) 1998 - 2020, Daniel Stenberg, <daniel@haxx.se>, et al. + * + * This software is licensed as described in the file COPYING, which + * you should have received as part of this distribution. The terms + * are also available at https://curl.se/docs/copyright.html. + * + * You may opt to use, copy, modify, merge, publish, distribute and/or sell + * copies of the Software, and permit persons to whom the Software is + * furnished to do so, under the terms of the COPYING file. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + ***************************************************************************/ +#ifdef __cplusplus +extern "C" { +#endif + +/* Flag bits in the curl_blob struct: */ +#define CURL_BLOB_COPY 1 /* tell libcurl to copy the data */ +#define CURL_BLOB_NOCOPY 0 /* tell libcurl to NOT copy the data */ + +struct curl_blob { + void *data; + size_t len; + unsigned int flags; /* bit 0 is defined, the rest are reserved and should be + left zeroes */ +}; + +CURL_EXTERN CURL *curl_easy_init(void); +CURL_EXTERN CURLcode curl_easy_setopt(CURL *curl, CURLoption option, ...); +CURL_EXTERN CURLcode curl_easy_perform(CURL *curl); +CURL_EXTERN void curl_easy_cleanup(CURL *curl); + +/* + * NAME curl_easy_getinfo() + * + * DESCRIPTION + * + * Request internal information from the curl session with this function. The + * third argument MUST be a pointer to a long, a pointer to a char * or a + * pointer to a double (as the documentation describes elsewhere). The data + * pointed to will be filled in accordingly and can be relied upon only if the + * function returns CURLE_OK. This function is intended to get used *AFTER* a + * performed transfer, all results from this function are undefined until the + * transfer is completed. + */ +CURL_EXTERN CURLcode curl_easy_getinfo(CURL *curl, CURLINFO info, ...); + + +/* + * NAME curl_easy_duphandle() + * + * DESCRIPTION + * + * Creates a new curl session handle with the same options set for the handle + * passed in. Duplicating a handle could only be a matter of cloning data and + * options, internal state info and things like persistent connections cannot + * be transferred. It is useful in multithreaded applications when you can run + * curl_easy_duphandle() for each new thread to avoid a series of identical + * curl_easy_setopt() invokes in every thread. + */ +CURL_EXTERN CURL *curl_easy_duphandle(CURL *curl); + +/* + * NAME curl_easy_reset() + * + * DESCRIPTION + * + * Re-initializes a CURL handle to the default values. This puts back the + * handle to the same state as it was in when it was just created. + * + * It does keep: live connections, the Session ID cache, the DNS cache and the + * cookies. + */ +CURL_EXTERN void curl_easy_reset(CURL *curl); + +/* + * NAME curl_easy_recv() + * + * DESCRIPTION + * + * Receives data from the connected socket. Use after successful + * curl_easy_perform() with CURLOPT_CONNECT_ONLY option. + */ +CURL_EXTERN CURLcode curl_easy_recv(CURL *curl, void *buffer, size_t buflen, + size_t *n); + +/* + * NAME curl_easy_send() + * + * DESCRIPTION + * + * Sends data over the connected socket. Use after successful + * curl_easy_perform() with CURLOPT_CONNECT_ONLY option. + */ +CURL_EXTERN CURLcode curl_easy_send(CURL *curl, const void *buffer, + size_t buflen, size_t *n); + + +/* + * NAME curl_easy_upkeep() + * + * DESCRIPTION + * + * Performs connection upkeep for the given session handle. + */ +CURL_EXTERN CURLcode curl_easy_upkeep(CURL *curl); + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/NorthstarDedicatedTest/include/libcurl/include/curl/mprintf.h b/NorthstarDedicatedTest/include/libcurl/include/curl/mprintf.h new file mode 100644 index 00000000..3549552d --- /dev/null +++ b/NorthstarDedicatedTest/include/libcurl/include/curl/mprintf.h @@ -0,0 +1,50 @@ +#ifndef CURLINC_MPRINTF_H +#define CURLINC_MPRINTF_H +/*************************************************************************** + * _ _ ____ _ + * Project ___| | | | _ \| | + * / __| | | | |_) | | + * | (__| |_| | _ <| |___ + * \___|\___/|_| \_\_____| + * + * Copyright (C) 1998 - 2020, Daniel Stenberg, <daniel@haxx.se>, et al. + * + * This software is licensed as described in the file COPYING, which + * you should have received as part of this distribution. The terms + * are also available at https://curl.se/docs/copyright.html. + * + * You may opt to use, copy, modify, merge, publish, distribute and/or sell + * copies of the Software, and permit persons to whom the Software is + * furnished to do so, under the terms of the COPYING file. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + ***************************************************************************/ + +#include <stdarg.h> +#include <stdio.h> /* needed for FILE */ +#include "curl.h" /* for CURL_EXTERN */ + +#ifdef __cplusplus +extern "C" { +#endif + +CURL_EXTERN int curl_mprintf(const char *format, ...); +CURL_EXTERN int curl_mfprintf(FILE *fd, const char *format, ...); +CURL_EXTERN int curl_msprintf(char *buffer, const char *format, ...); +CURL_EXTERN int curl_msnprintf(char *buffer, size_t maxlength, + const char *format, ...); +CURL_EXTERN int curl_mvprintf(const char *format, va_list args); +CURL_EXTERN int curl_mvfprintf(FILE *fd, const char *format, va_list args); +CURL_EXTERN int curl_mvsprintf(char *buffer, const char *format, va_list args); +CURL_EXTERN int curl_mvsnprintf(char *buffer, size_t maxlength, + const char *format, va_list args); +CURL_EXTERN char *curl_maprintf(const char *format, ...); +CURL_EXTERN char *curl_mvaprintf(const char *format, va_list args); + +#ifdef __cplusplus +} +#endif + +#endif /* CURLINC_MPRINTF_H */ diff --git a/NorthstarDedicatedTest/include/libcurl/include/curl/multi.h b/NorthstarDedicatedTest/include/libcurl/include/curl/multi.h new file mode 100644 index 00000000..91cd95d3 --- /dev/null +++ b/NorthstarDedicatedTest/include/libcurl/include/curl/multi.h @@ -0,0 +1,457 @@ +#ifndef CURLINC_MULTI_H +#define CURLINC_MULTI_H +/*************************************************************************** + * _ _ ____ _ + * Project ___| | | | _ \| | + * / __| | | | |_) | | + * | (__| |_| | _ <| |___ + * \___|\___/|_| \_\_____| + * + * Copyright (C) 1998 - 2021, Daniel Stenberg, <daniel@haxx.se>, et al. + * + * This software is licensed as described in the file COPYING, which + * you should have received as part of this distribution. The terms + * are also available at https://curl.se/docs/copyright.html. + * + * You may opt to use, copy, modify, merge, publish, distribute and/or sell + * copies of the Software, and permit persons to whom the Software is + * furnished to do so, under the terms of the COPYING file. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + ***************************************************************************/ +/* + This is an "external" header file. Don't give away any internals here! + + GOALS + + o Enable a "pull" interface. The application that uses libcurl decides where + and when to ask libcurl to get/send data. + + o Enable multiple simultaneous transfers in the same thread without making it + complicated for the application. + + o Enable the application to select() on its own file descriptors and curl's + file descriptors simultaneous easily. + +*/ + +/* + * This header file should not really need to include "curl.h" since curl.h + * itself includes this file and we expect user applications to do #include + * <curl/curl.h> without the need for especially including multi.h. + * + * For some reason we added this include here at one point, and rather than to + * break existing (wrongly written) libcurl applications, we leave it as-is + * but with this warning attached. + */ +#include "curl.h" + +#ifdef __cplusplus +extern "C" { +#endif + +#if defined(BUILDING_LIBCURL) || defined(CURL_STRICTER) +typedef struct Curl_multi CURLM; +#else +typedef void CURLM; +#endif + +typedef enum { + CURLM_CALL_MULTI_PERFORM = -1, /* please call curl_multi_perform() or + curl_multi_socket*() soon */ + CURLM_OK, + CURLM_BAD_HANDLE, /* the passed-in handle is not a valid CURLM handle */ + CURLM_BAD_EASY_HANDLE, /* an easy handle was not good/valid */ + CURLM_OUT_OF_MEMORY, /* if you ever get this, you're in deep sh*t */ + CURLM_INTERNAL_ERROR, /* this is a libcurl bug */ + CURLM_BAD_SOCKET, /* the passed in socket argument did not match */ + CURLM_UNKNOWN_OPTION, /* curl_multi_setopt() with unsupported option */ + CURLM_ADDED_ALREADY, /* an easy handle already added to a multi handle was + attempted to get added - again */ + CURLM_RECURSIVE_API_CALL, /* an api function was called from inside a + callback */ + CURLM_WAKEUP_FAILURE, /* wakeup is unavailable or failed */ + CURLM_BAD_FUNCTION_ARGUMENT, /* function called with a bad parameter */ + CURLM_ABORTED_BY_CALLBACK, + CURLM_LAST +} CURLMcode; + +/* just to make code nicer when using curl_multi_socket() you can now check + for CURLM_CALL_MULTI_SOCKET too in the same style it works for + curl_multi_perform() and CURLM_CALL_MULTI_PERFORM */ +#define CURLM_CALL_MULTI_SOCKET CURLM_CALL_MULTI_PERFORM + +/* bitmask bits for CURLMOPT_PIPELINING */ +#define CURLPIPE_NOTHING 0L +#define CURLPIPE_HTTP1 1L +#define CURLPIPE_MULTIPLEX 2L + +typedef enum { + CURLMSG_NONE, /* first, not used */ + CURLMSG_DONE, /* This easy handle has completed. 'result' contains + the CURLcode of the transfer */ + CURLMSG_LAST /* last, not used */ +} CURLMSG; + +struct CURLMsg { + CURLMSG msg; /* what this message means */ + CURL *easy_handle; /* the handle it concerns */ + union { + void *whatever; /* message-specific data */ + CURLcode result; /* return code for transfer */ + } data; +}; +typedef struct CURLMsg CURLMsg; + +/* Based on poll(2) structure and values. + * We don't use pollfd and POLL* constants explicitly + * to cover platforms without poll(). */ +#define CURL_WAIT_POLLIN 0x0001 +#define CURL_WAIT_POLLPRI 0x0002 +#define CURL_WAIT_POLLOUT 0x0004 + +struct curl_waitfd { + curl_socket_t fd; + short events; + short revents; /* not supported yet */ +}; + +/* + * Name: curl_multi_init() + * + * Desc: inititalize multi-style curl usage + * + * Returns: a new CURLM handle to use in all 'curl_multi' functions. + */ +CURL_EXTERN CURLM *curl_multi_init(void); + +/* + * Name: curl_multi_add_handle() + * + * Desc: add a standard curl handle to the multi stack + * + * Returns: CURLMcode type, general multi error code. + */ +CURL_EXTERN CURLMcode curl_multi_add_handle(CURLM *multi_handle, + CURL *curl_handle); + + /* + * Name: curl_multi_remove_handle() + * + * Desc: removes a curl handle from the multi stack again + * + * Returns: CURLMcode type, general multi error code. + */ +CURL_EXTERN CURLMcode curl_multi_remove_handle(CURLM *multi_handle, + CURL *curl_handle); + + /* + * Name: curl_multi_fdset() + * + * Desc: Ask curl for its fd_set sets. The app can use these to select() or + * poll() on. We want curl_multi_perform() called as soon as one of + * them are ready. + * + * Returns: CURLMcode type, general multi error code. + */ +CURL_EXTERN CURLMcode curl_multi_fdset(CURLM *multi_handle, + fd_set *read_fd_set, + fd_set *write_fd_set, + fd_set *exc_fd_set, + int *max_fd); + +/* + * Name: curl_multi_wait() + * + * Desc: Poll on all fds within a CURLM set as well as any + * additional fds passed to the function. + * + * Returns: CURLMcode type, general multi error code. + */ +CURL_EXTERN CURLMcode curl_multi_wait(CURLM *multi_handle, + struct curl_waitfd extra_fds[], + unsigned int extra_nfds, + int timeout_ms, + int *ret); + +/* + * Name: curl_multi_poll() + * + * Desc: Poll on all fds within a CURLM set as well as any + * additional fds passed to the function. + * + * Returns: CURLMcode type, general multi error code. + */ +CURL_EXTERN CURLMcode curl_multi_poll(CURLM *multi_handle, + struct curl_waitfd extra_fds[], + unsigned int extra_nfds, + int timeout_ms, + int *ret); + +/* + * Name: curl_multi_wakeup() + * + * Desc: wakes up a sleeping curl_multi_poll call. + * + * Returns: CURLMcode type, general multi error code. + */ +CURL_EXTERN CURLMcode curl_multi_wakeup(CURLM *multi_handle); + + /* + * Name: curl_multi_perform() + * + * Desc: When the app thinks there's data available for curl it calls this + * function to read/write whatever there is right now. This returns + * as soon as the reads and writes are done. This function does not + * require that there actually is data available for reading or that + * data can be written, it can be called just in case. It returns + * the number of handles that still transfer data in the second + * argument's integer-pointer. + * + * Returns: CURLMcode type, general multi error code. *NOTE* that this only + * returns errors etc regarding the whole multi stack. There might + * still have occurred problems on individual transfers even when + * this returns OK. + */ +CURL_EXTERN CURLMcode curl_multi_perform(CURLM *multi_handle, + int *running_handles); + + /* + * Name: curl_multi_cleanup() + * + * Desc: Cleans up and removes a whole multi stack. It does not free or + * touch any individual easy handles in any way. We need to define + * in what state those handles will be if this function is called + * in the middle of a transfer. + * + * Returns: CURLMcode type, general multi error code. + */ +CURL_EXTERN CURLMcode curl_multi_cleanup(CURLM *multi_handle); + +/* + * Name: curl_multi_info_read() + * + * Desc: Ask the multi handle if there's any messages/informationals from + * the individual transfers. Messages include informationals such as + * error code from the transfer or just the fact that a transfer is + * completed. More details on these should be written down as well. + * + * Repeated calls to this function will return a new struct each + * time, until a special "end of msgs" struct is returned as a signal + * that there is no more to get at this point. + * + * The data the returned pointer points to will not survive calling + * curl_multi_cleanup(). + * + * The 'CURLMsg' struct is meant to be very simple and only contain + * very basic information. If more involved information is wanted, + * we will provide the particular "transfer handle" in that struct + * and that should/could/would be used in subsequent + * curl_easy_getinfo() calls (or similar). The point being that we + * must never expose complex structs to applications, as then we'll + * undoubtably get backwards compatibility problems in the future. + * + * Returns: A pointer to a filled-in struct, or NULL if it failed or ran out + * of structs. It also writes the number of messages left in the + * queue (after this read) in the integer the second argument points + * to. + */ +CURL_EXTERN CURLMsg *curl_multi_info_read(CURLM *multi_handle, + int *msgs_in_queue); + +/* + * Name: curl_multi_strerror() + * + * Desc: The curl_multi_strerror function may be used to turn a CURLMcode + * value into the equivalent human readable error string. This is + * useful for printing meaningful error messages. + * + * Returns: A pointer to a null-terminated error message. + */ +CURL_EXTERN const char *curl_multi_strerror(CURLMcode); + +/* + * Name: curl_multi_socket() and + * curl_multi_socket_all() + * + * Desc: An alternative version of curl_multi_perform() that allows the + * application to pass in one of the file descriptors that have been + * detected to have "action" on them and let libcurl perform. + * See man page for details. + */ +#define CURL_POLL_NONE 0 +#define CURL_POLL_IN 1 +#define CURL_POLL_OUT 2 +#define CURL_POLL_INOUT 3 +#define CURL_POLL_REMOVE 4 + +#define CURL_SOCKET_TIMEOUT CURL_SOCKET_BAD + +#define CURL_CSELECT_IN 0x01 +#define CURL_CSELECT_OUT 0x02 +#define CURL_CSELECT_ERR 0x04 + +typedef int (*curl_socket_callback)(CURL *easy, /* easy handle */ + curl_socket_t s, /* socket */ + int what, /* see above */ + void *userp, /* private callback + pointer */ + void *socketp); /* private socket + pointer */ +/* + * Name: curl_multi_timer_callback + * + * Desc: Called by libcurl whenever the library detects a change in the + * maximum number of milliseconds the app is allowed to wait before + * curl_multi_socket() or curl_multi_perform() must be called + * (to allow libcurl's timed events to take place). + * + * Returns: The callback should return zero. + */ +typedef int (*curl_multi_timer_callback)(CURLM *multi, /* multi handle */ + long timeout_ms, /* see above */ + void *userp); /* private callback + pointer */ + +CURL_EXTERN CURLMcode curl_multi_socket(CURLM *multi_handle, curl_socket_t s, + int *running_handles); + +CURL_EXTERN CURLMcode curl_multi_socket_action(CURLM *multi_handle, + curl_socket_t s, + int ev_bitmask, + int *running_handles); + +CURL_EXTERN CURLMcode curl_multi_socket_all(CURLM *multi_handle, + int *running_handles); + +#ifndef CURL_ALLOW_OLD_MULTI_SOCKET +/* This macro below was added in 7.16.3 to push users who recompile to use + the new curl_multi_socket_action() instead of the old curl_multi_socket() +*/ +#define curl_multi_socket(x,y,z) curl_multi_socket_action(x,y,0,z) +#endif + +/* + * Name: curl_multi_timeout() + * + * Desc: Returns the maximum number of milliseconds the app is allowed to + * wait before curl_multi_socket() or curl_multi_perform() must be + * called (to allow libcurl's timed events to take place). + * + * Returns: CURLM error code. + */ +CURL_EXTERN CURLMcode curl_multi_timeout(CURLM *multi_handle, + long *milliseconds); + +typedef enum { + /* This is the socket callback function pointer */ + CURLOPT(CURLMOPT_SOCKETFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 1), + + /* This is the argument passed to the socket callback */ + CURLOPT(CURLMOPT_SOCKETDATA, CURLOPTTYPE_OBJECTPOINT, 2), + + /* set to 1 to enable pipelining for this multi handle */ + CURLOPT(CURLMOPT_PIPELINING, CURLOPTTYPE_LONG, 3), + + /* This is the timer callback function pointer */ + CURLOPT(CURLMOPT_TIMERFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 4), + + /* This is the argument passed to the timer callback */ + CURLOPT(CURLMOPT_TIMERDATA, CURLOPTTYPE_OBJECTPOINT, 5), + + /* maximum number of entries in the connection cache */ + CURLOPT(CURLMOPT_MAXCONNECTS, CURLOPTTYPE_LONG, 6), + + /* maximum number of (pipelining) connections to one host */ + CURLOPT(CURLMOPT_MAX_HOST_CONNECTIONS, CURLOPTTYPE_LONG, 7), + + /* maximum number of requests in a pipeline */ + CURLOPT(CURLMOPT_MAX_PIPELINE_LENGTH, CURLOPTTYPE_LONG, 8), + + /* a connection with a content-length longer than this + will not be considered for pipelining */ + CURLOPT(CURLMOPT_CONTENT_LENGTH_PENALTY_SIZE, CURLOPTTYPE_OFF_T, 9), + + /* a connection with a chunk length longer than this + will not be considered for pipelining */ + CURLOPT(CURLMOPT_CHUNK_LENGTH_PENALTY_SIZE, CURLOPTTYPE_OFF_T, 10), + + /* a list of site names(+port) that are blocked from pipelining */ + CURLOPT(CURLMOPT_PIPELINING_SITE_BL, CURLOPTTYPE_OBJECTPOINT, 11), + + /* a list of server types that are blocked from pipelining */ + CURLOPT(CURLMOPT_PIPELINING_SERVER_BL, CURLOPTTYPE_OBJECTPOINT, 12), + + /* maximum number of open connections in total */ + CURLOPT(CURLMOPT_MAX_TOTAL_CONNECTIONS, CURLOPTTYPE_LONG, 13), + + /* This is the server push callback function pointer */ + CURLOPT(CURLMOPT_PUSHFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 14), + + /* This is the argument passed to the server push callback */ + CURLOPT(CURLMOPT_PUSHDATA, CURLOPTTYPE_OBJECTPOINT, 15), + + /* maximum number of concurrent streams to support on a connection */ + CURLOPT(CURLMOPT_MAX_CONCURRENT_STREAMS, CURLOPTTYPE_LONG, 16), + + CURLMOPT_LASTENTRY /* the last unused */ +} CURLMoption; + + +/* + * Name: curl_multi_setopt() + * + * Desc: Sets options for the multi handle. + * + * Returns: CURLM error code. + */ +CURL_EXTERN CURLMcode curl_multi_setopt(CURLM *multi_handle, + CURLMoption option, ...); + + +/* + * Name: curl_multi_assign() + * + * Desc: This function sets an association in the multi handle between the + * given socket and a private pointer of the application. This is + * (only) useful for curl_multi_socket uses. + * + * Returns: CURLM error code. + */ +CURL_EXTERN CURLMcode curl_multi_assign(CURLM *multi_handle, + curl_socket_t sockfd, void *sockp); + + +/* + * Name: curl_push_callback + * + * Desc: This callback gets called when a new stream is being pushed by the + * server. It approves or denies the new stream. It can also decide + * to completely fail the connection. + * + * Returns: CURL_PUSH_OK, CURL_PUSH_DENY or CURL_PUSH_ERROROUT + */ +#define CURL_PUSH_OK 0 +#define CURL_PUSH_DENY 1 +#define CURL_PUSH_ERROROUT 2 /* added in 7.72.0 */ + +struct curl_pushheaders; /* forward declaration only */ + +CURL_EXTERN char *curl_pushheader_bynum(struct curl_pushheaders *h, + size_t num); +CURL_EXTERN char *curl_pushheader_byname(struct curl_pushheaders *h, + const char *name); + +typedef int (*curl_push_callback)(CURL *parent, + CURL *easy, + size_t num_headers, + struct curl_pushheaders *headers, + void *userp); + +#ifdef __cplusplus +} /* end of extern "C" */ +#endif + +#endif diff --git a/NorthstarDedicatedTest/include/libcurl/include/curl/options.h b/NorthstarDedicatedTest/include/libcurl/include/curl/options.h new file mode 100644 index 00000000..14373b55 --- /dev/null +++ b/NorthstarDedicatedTest/include/libcurl/include/curl/options.h @@ -0,0 +1,68 @@ +#ifndef CURLINC_OPTIONS_H +#define CURLINC_OPTIONS_H +/*************************************************************************** + * _ _ ____ _ + * Project ___| | | | _ \| | + * / __| | | | |_) | | + * | (__| |_| | _ <| |___ + * \___|\___/|_| \_\_____| + * + * Copyright (C) 2018 - 2020, Daniel Stenberg, <daniel@haxx.se>, et al. + * + * This software is licensed as described in the file COPYING, which + * you should have received as part of this distribution. The terms + * are also available at https://curl.se/docs/copyright.html. + * + * You may opt to use, copy, modify, merge, publish, distribute and/or sell + * copies of the Software, and permit persons to whom the Software is + * furnished to do so, under the terms of the COPYING file. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + ***************************************************************************/ + +#ifdef __cplusplus +extern "C" { +#endif + +typedef enum { + CURLOT_LONG, /* long (a range of values) */ + CURLOT_VALUES, /* (a defined set or bitmask) */ + CURLOT_OFF_T, /* curl_off_t (a range of values) */ + CURLOT_OBJECT, /* pointer (void *) */ + CURLOT_STRING, /* (char * to zero terminated buffer) */ + CURLOT_SLIST, /* (struct curl_slist *) */ + CURLOT_CBPTR, /* (void * passed as-is to a callback) */ + CURLOT_BLOB, /* blob (struct curl_blob *) */ + CURLOT_FUNCTION /* function pointer */ +} curl_easytype; + +/* Flag bits */ + +/* "alias" means it is provided for old programs to remain functional, + we prefer another name */ +#define CURLOT_FLAG_ALIAS (1<<0) + +/* The CURLOPTTYPE_* id ranges can still be used to figure out what type/size + to use for curl_easy_setopt() for the given id */ +struct curl_easyoption { + const char *name; + CURLoption id; + curl_easytype type; + unsigned int flags; +}; + +CURL_EXTERN const struct curl_easyoption * +curl_easy_option_by_name(const char *name); + +CURL_EXTERN const struct curl_easyoption * +curl_easy_option_by_id (CURLoption id); + +CURL_EXTERN const struct curl_easyoption * +curl_easy_option_next(const struct curl_easyoption *prev); + +#ifdef __cplusplus +} /* end of extern "C" */ +#endif +#endif /* CURLINC_OPTIONS_H */ diff --git a/NorthstarDedicatedTest/include/libcurl/include/curl/stdcheaders.h b/NorthstarDedicatedTest/include/libcurl/include/curl/stdcheaders.h new file mode 100644 index 00000000..60596c75 --- /dev/null +++ b/NorthstarDedicatedTest/include/libcurl/include/curl/stdcheaders.h @@ -0,0 +1,33 @@ +#ifndef CURLINC_STDCHEADERS_H +#define CURLINC_STDCHEADERS_H +/*************************************************************************** + * _ _ ____ _ + * Project ___| | | | _ \| | + * / __| | | | |_) | | + * | (__| |_| | _ <| |___ + * \___|\___/|_| \_\_____| + * + * Copyright (C) 1998 - 2020, Daniel Stenberg, <daniel@haxx.se>, et al. + * + * This software is licensed as described in the file COPYING, which + * you should have received as part of this distribution. The terms + * are also available at https://curl.se/docs/copyright.html. + * + * You may opt to use, copy, modify, merge, publish, distribute and/or sell + * copies of the Software, and permit persons to whom the Software is + * furnished to do so, under the terms of the COPYING file. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + ***************************************************************************/ + +#include <sys/types.h> + +size_t fread(void *, size_t, size_t, FILE *); +size_t fwrite(const void *, size_t, size_t, FILE *); + +int strcasecmp(const char *, const char *); +int strncasecmp(const char *, const char *, size_t); + +#endif /* CURLINC_STDCHEADERS_H */ diff --git a/NorthstarDedicatedTest/include/libcurl/include/curl/system.h b/NorthstarDedicatedTest/include/libcurl/include/curl/system.h new file mode 100644 index 00000000..faf8fcf8 --- /dev/null +++ b/NorthstarDedicatedTest/include/libcurl/include/curl/system.h @@ -0,0 +1,504 @@ +#ifndef CURLINC_SYSTEM_H +#define CURLINC_SYSTEM_H +/*************************************************************************** + * _ _ ____ _ + * Project ___| | | | _ \| | + * / __| | | | |_) | | + * | (__| |_| | _ <| |___ + * \___|\___/|_| \_\_____| + * + * Copyright (C) 1998 - 2020, Daniel Stenberg, <daniel@haxx.se>, et al. + * + * This software is licensed as described in the file COPYING, which + * you should have received as part of this distribution. The terms + * are also available at https://curl.se/docs/copyright.html. + * + * You may opt to use, copy, modify, merge, publish, distribute and/or sell + * copies of the Software, and permit persons to whom the Software is + * furnished to do so, under the terms of the COPYING file. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + ***************************************************************************/ + +/* + * Try to keep one section per platform, compiler and architecture, otherwise, + * if an existing section is reused for a different one and later on the + * original is adjusted, probably the piggybacking one can be adversely + * changed. + * + * In order to differentiate between platforms/compilers/architectures use + * only compiler built in predefined preprocessor symbols. + * + * curl_off_t + * ---------- + * + * For any given platform/compiler curl_off_t must be typedef'ed to a 64-bit + * wide signed integral data type. The width of this data type must remain + * constant and independent of any possible large file support settings. + * + * As an exception to the above, curl_off_t shall be typedef'ed to a 32-bit + * wide signed integral data type if there is no 64-bit type. + * + * As a general rule, curl_off_t shall not be mapped to off_t. This rule shall + * only be violated if off_t is the only 64-bit data type available and the + * size of off_t is independent of large file support settings. Keep your + * build on the safe side avoiding an off_t gating. If you have a 64-bit + * off_t then take for sure that another 64-bit data type exists, dig deeper + * and you will find it. + * + */ + +#if defined(__DJGPP__) || defined(__GO32__) +# if defined(__DJGPP__) && (__DJGPP__ > 1) +# define CURL_TYPEOF_CURL_OFF_T long long +# define CURL_FORMAT_CURL_OFF_T "lld" +# define CURL_FORMAT_CURL_OFF_TU "llu" +# define CURL_SUFFIX_CURL_OFF_T LL +# define CURL_SUFFIX_CURL_OFF_TU ULL +# else +# define CURL_TYPEOF_CURL_OFF_T long +# define CURL_FORMAT_CURL_OFF_T "ld" +# define CURL_FORMAT_CURL_OFF_TU "lu" +# define CURL_SUFFIX_CURL_OFF_T L +# define CURL_SUFFIX_CURL_OFF_TU UL +# endif +# define CURL_TYPEOF_CURL_SOCKLEN_T int + +#elif defined(__SALFORDC__) +# define CURL_TYPEOF_CURL_OFF_T long +# define CURL_FORMAT_CURL_OFF_T "ld" +# define CURL_FORMAT_CURL_OFF_TU "lu" +# define CURL_SUFFIX_CURL_OFF_T L +# define CURL_SUFFIX_CURL_OFF_TU UL +# define CURL_TYPEOF_CURL_SOCKLEN_T int + +#elif defined(__BORLANDC__) +# if (__BORLANDC__ < 0x520) +# define CURL_TYPEOF_CURL_OFF_T long +# define CURL_FORMAT_CURL_OFF_T "ld" +# define CURL_FORMAT_CURL_OFF_TU "lu" +# define CURL_SUFFIX_CURL_OFF_T L +# define CURL_SUFFIX_CURL_OFF_TU UL +# else +# define CURL_TYPEOF_CURL_OFF_T __int64 +# define CURL_FORMAT_CURL_OFF_T "I64d" +# define CURL_FORMAT_CURL_OFF_TU "I64u" +# define CURL_SUFFIX_CURL_OFF_T i64 +# define CURL_SUFFIX_CURL_OFF_TU ui64 +# endif +# define CURL_TYPEOF_CURL_SOCKLEN_T int + +#elif defined(__TURBOC__) +# define CURL_TYPEOF_CURL_OFF_T long +# define CURL_FORMAT_CURL_OFF_T "ld" +# define CURL_FORMAT_CURL_OFF_TU "lu" +# define CURL_SUFFIX_CURL_OFF_T L +# define CURL_SUFFIX_CURL_OFF_TU UL +# define CURL_TYPEOF_CURL_SOCKLEN_T int + +#elif defined(__WATCOMC__) +# if defined(__386__) +# define CURL_TYPEOF_CURL_OFF_T __int64 +# define CURL_FORMAT_CURL_OFF_T "I64d" +# define CURL_FORMAT_CURL_OFF_TU "I64u" +# define CURL_SUFFIX_CURL_OFF_T i64 +# define CURL_SUFFIX_CURL_OFF_TU ui64 +# else +# define CURL_TYPEOF_CURL_OFF_T long +# define CURL_FORMAT_CURL_OFF_T "ld" +# define CURL_FORMAT_CURL_OFF_TU "lu" +# define CURL_SUFFIX_CURL_OFF_T L +# define CURL_SUFFIX_CURL_OFF_TU UL +# endif +# define CURL_TYPEOF_CURL_SOCKLEN_T int + +#elif defined(__POCC__) +# if (__POCC__ < 280) +# define CURL_TYPEOF_CURL_OFF_T long +# define CURL_FORMAT_CURL_OFF_T "ld" +# define CURL_FORMAT_CURL_OFF_TU "lu" +# define CURL_SUFFIX_CURL_OFF_T L +# define CURL_SUFFIX_CURL_OFF_TU UL +# elif defined(_MSC_VER) +# define CURL_TYPEOF_CURL_OFF_T __int64 +# define CURL_FORMAT_CURL_OFF_T "I64d" +# define CURL_FORMAT_CURL_OFF_TU "I64u" +# define CURL_SUFFIX_CURL_OFF_T i64 +# define CURL_SUFFIX_CURL_OFF_TU ui64 +# else +# define CURL_TYPEOF_CURL_OFF_T long long +# define CURL_FORMAT_CURL_OFF_T "lld" +# define CURL_FORMAT_CURL_OFF_TU "llu" +# define CURL_SUFFIX_CURL_OFF_T LL +# define CURL_SUFFIX_CURL_OFF_TU ULL +# endif +# define CURL_TYPEOF_CURL_SOCKLEN_T int + +#elif defined(__LCC__) +# if defined(__e2k__) /* MCST eLbrus C Compiler */ +# define CURL_TYPEOF_CURL_OFF_T long +# define CURL_FORMAT_CURL_OFF_T "ld" +# define CURL_FORMAT_CURL_OFF_TU "lu" +# define CURL_SUFFIX_CURL_OFF_T L +# define CURL_SUFFIX_CURL_OFF_TU UL +# define CURL_TYPEOF_CURL_SOCKLEN_T socklen_t +# define CURL_PULL_SYS_TYPES_H 1 +# define CURL_PULL_SYS_SOCKET_H 1 +# else /* Local (or Little) C Compiler */ +# define CURL_TYPEOF_CURL_OFF_T long +# define CURL_FORMAT_CURL_OFF_T "ld" +# define CURL_FORMAT_CURL_OFF_TU "lu" +# define CURL_SUFFIX_CURL_OFF_T L +# define CURL_SUFFIX_CURL_OFF_TU UL +# define CURL_TYPEOF_CURL_SOCKLEN_T int +# endif + +#elif defined(__SYMBIAN32__) +# if defined(__EABI__) /* Treat all ARM compilers equally */ +# define CURL_TYPEOF_CURL_OFF_T long long +# define CURL_FORMAT_CURL_OFF_T "lld" +# define CURL_FORMAT_CURL_OFF_TU "llu" +# define CURL_SUFFIX_CURL_OFF_T LL +# define CURL_SUFFIX_CURL_OFF_TU ULL +# elif defined(__CW32__) +# pragma longlong on +# define CURL_TYPEOF_CURL_OFF_T long long +# define CURL_FORMAT_CURL_OFF_T "lld" +# define CURL_FORMAT_CURL_OFF_TU "llu" +# define CURL_SUFFIX_CURL_OFF_T LL +# define CURL_SUFFIX_CURL_OFF_TU ULL +# elif defined(__VC32__) +# define CURL_TYPEOF_CURL_OFF_T __int64 +# define CURL_FORMAT_CURL_OFF_T "lld" +# define CURL_FORMAT_CURL_OFF_TU "llu" +# define CURL_SUFFIX_CURL_OFF_T LL +# define CURL_SUFFIX_CURL_OFF_TU ULL +# endif +# define CURL_TYPEOF_CURL_SOCKLEN_T unsigned int + +#elif defined(__MWERKS__) +# define CURL_TYPEOF_CURL_OFF_T long long +# define CURL_FORMAT_CURL_OFF_T "lld" +# define CURL_FORMAT_CURL_OFF_TU "llu" +# define CURL_SUFFIX_CURL_OFF_T LL +# define CURL_SUFFIX_CURL_OFF_TU ULL +# define CURL_TYPEOF_CURL_SOCKLEN_T int + +#elif defined(_WIN32_WCE) +# define CURL_TYPEOF_CURL_OFF_T __int64 +# define CURL_FORMAT_CURL_OFF_T "I64d" +# define CURL_FORMAT_CURL_OFF_TU "I64u" +# define CURL_SUFFIX_CURL_OFF_T i64 +# define CURL_SUFFIX_CURL_OFF_TU ui64 +# define CURL_TYPEOF_CURL_SOCKLEN_T int + +#elif defined(__MINGW32__) +# define CURL_TYPEOF_CURL_OFF_T long long +# define CURL_FORMAT_CURL_OFF_T "I64d" +# define CURL_FORMAT_CURL_OFF_TU "I64u" +# define CURL_SUFFIX_CURL_OFF_T LL +# define CURL_SUFFIX_CURL_OFF_TU ULL +# define CURL_TYPEOF_CURL_SOCKLEN_T socklen_t +# define CURL_PULL_SYS_TYPES_H 1 +# define CURL_PULL_WS2TCPIP_H 1 + +#elif defined(__VMS) +# if defined(__VAX) +# define CURL_TYPEOF_CURL_OFF_T long +# define CURL_FORMAT_CURL_OFF_T "ld" +# define CURL_FORMAT_CURL_OFF_TU "lu" +# define CURL_SUFFIX_CURL_OFF_T L +# define CURL_SUFFIX_CURL_OFF_TU UL +# else +# define CURL_TYPEOF_CURL_OFF_T long long +# define CURL_FORMAT_CURL_OFF_T "lld" +# define CURL_FORMAT_CURL_OFF_TU "llu" +# define CURL_SUFFIX_CURL_OFF_T LL +# define CURL_SUFFIX_CURL_OFF_TU ULL +# endif +# define CURL_TYPEOF_CURL_SOCKLEN_T unsigned int + +#elif defined(__OS400__) +# if defined(__ILEC400__) +# define CURL_TYPEOF_CURL_OFF_T long long +# define CURL_FORMAT_CURL_OFF_T "lld" +# define CURL_FORMAT_CURL_OFF_TU "llu" +# define CURL_SUFFIX_CURL_OFF_T LL +# define CURL_SUFFIX_CURL_OFF_TU ULL +# define CURL_TYPEOF_CURL_SOCKLEN_T socklen_t +# define CURL_PULL_SYS_TYPES_H 1 +# define CURL_PULL_SYS_SOCKET_H 1 +# endif + +#elif defined(__MVS__) +# if defined(__IBMC__) || defined(__IBMCPP__) +# if defined(_ILP32) +# elif defined(_LP64) +# endif +# if defined(_LONG_LONG) +# define CURL_TYPEOF_CURL_OFF_T long long +# define CURL_FORMAT_CURL_OFF_T "lld" +# define CURL_FORMAT_CURL_OFF_TU "llu" +# define CURL_SUFFIX_CURL_OFF_T LL +# define CURL_SUFFIX_CURL_OFF_TU ULL +# elif defined(_LP64) +# define CURL_TYPEOF_CURL_OFF_T long +# define CURL_FORMAT_CURL_OFF_T "ld" +# define CURL_FORMAT_CURL_OFF_TU "lu" +# define CURL_SUFFIX_CURL_OFF_T L +# define CURL_SUFFIX_CURL_OFF_TU UL +# else +# define CURL_TYPEOF_CURL_OFF_T long +# define CURL_FORMAT_CURL_OFF_T "ld" +# define CURL_FORMAT_CURL_OFF_TU "lu" +# define CURL_SUFFIX_CURL_OFF_T L +# define CURL_SUFFIX_CURL_OFF_TU UL +# endif +# define CURL_TYPEOF_CURL_SOCKLEN_T socklen_t +# define CURL_PULL_SYS_TYPES_H 1 +# define CURL_PULL_SYS_SOCKET_H 1 +# endif + +#elif defined(__370__) +# if defined(__IBMC__) || defined(__IBMCPP__) +# if defined(_ILP32) +# elif defined(_LP64) +# endif +# if defined(_LONG_LONG) +# define CURL_TYPEOF_CURL_OFF_T long long +# define CURL_FORMAT_CURL_OFF_T "lld" +# define CURL_FORMAT_CURL_OFF_TU "llu" +# define CURL_SUFFIX_CURL_OFF_T LL +# define CURL_SUFFIX_CURL_OFF_TU ULL +# elif defined(_LP64) +# define CURL_TYPEOF_CURL_OFF_T long +# define CURL_FORMAT_CURL_OFF_T "ld" +# define CURL_FORMAT_CURL_OFF_TU "lu" +# define CURL_SUFFIX_CURL_OFF_T L +# define CURL_SUFFIX_CURL_OFF_TU UL +# else +# define CURL_TYPEOF_CURL_OFF_T long +# define CURL_FORMAT_CURL_OFF_T "ld" +# define CURL_FORMAT_CURL_OFF_TU "lu" +# define CURL_SUFFIX_CURL_OFF_T L +# define CURL_SUFFIX_CURL_OFF_TU UL +# endif +# define CURL_TYPEOF_CURL_SOCKLEN_T socklen_t +# define CURL_PULL_SYS_TYPES_H 1 +# define CURL_PULL_SYS_SOCKET_H 1 +# endif + +#elif defined(TPF) +# define CURL_TYPEOF_CURL_OFF_T long +# define CURL_FORMAT_CURL_OFF_T "ld" +# define CURL_FORMAT_CURL_OFF_TU "lu" +# define CURL_SUFFIX_CURL_OFF_T L +# define CURL_SUFFIX_CURL_OFF_TU UL +# define CURL_TYPEOF_CURL_SOCKLEN_T int + +#elif defined(__TINYC__) /* also known as tcc */ +# define CURL_TYPEOF_CURL_OFF_T long long +# define CURL_FORMAT_CURL_OFF_T "lld" +# define CURL_FORMAT_CURL_OFF_TU "llu" +# define CURL_SUFFIX_CURL_OFF_T LL +# define CURL_SUFFIX_CURL_OFF_TU ULL +# define CURL_TYPEOF_CURL_SOCKLEN_T socklen_t +# define CURL_PULL_SYS_TYPES_H 1 +# define CURL_PULL_SYS_SOCKET_H 1 + +#elif defined(__SUNPRO_C) || defined(__SUNPRO_CC) /* Oracle Solaris Studio */ +# if !defined(__LP64) && (defined(__ILP32) || \ + defined(__i386) || \ + defined(__sparcv8) || \ + defined(__sparcv8plus)) +# define CURL_TYPEOF_CURL_OFF_T long long +# define CURL_FORMAT_CURL_OFF_T "lld" +# define CURL_FORMAT_CURL_OFF_TU "llu" +# define CURL_SUFFIX_CURL_OFF_T LL +# define CURL_SUFFIX_CURL_OFF_TU ULL +# elif defined(__LP64) || \ + defined(__amd64) || defined(__sparcv9) +# define CURL_TYPEOF_CURL_OFF_T long +# define CURL_FORMAT_CURL_OFF_T "ld" +# define CURL_FORMAT_CURL_OFF_TU "lu" +# define CURL_SUFFIX_CURL_OFF_T L +# define CURL_SUFFIX_CURL_OFF_TU UL +# endif +# define CURL_TYPEOF_CURL_SOCKLEN_T socklen_t +# define CURL_PULL_SYS_TYPES_H 1 +# define CURL_PULL_SYS_SOCKET_H 1 + +#elif defined(__xlc__) /* IBM xlc compiler */ +# if !defined(_LP64) +# define CURL_TYPEOF_CURL_OFF_T long long +# define CURL_FORMAT_CURL_OFF_T "lld" +# define CURL_FORMAT_CURL_OFF_TU "llu" +# define CURL_SUFFIX_CURL_OFF_T LL +# define CURL_SUFFIX_CURL_OFF_TU ULL +# else +# define CURL_TYPEOF_CURL_OFF_T long +# define CURL_FORMAT_CURL_OFF_T "ld" +# define CURL_FORMAT_CURL_OFF_TU "lu" +# define CURL_SUFFIX_CURL_OFF_T L +# define CURL_SUFFIX_CURL_OFF_TU UL +# endif +# define CURL_TYPEOF_CURL_SOCKLEN_T socklen_t +# define CURL_PULL_SYS_TYPES_H 1 +# define CURL_PULL_SYS_SOCKET_H 1 + +/* ===================================== */ +/* KEEP MSVC THE PENULTIMATE ENTRY */ +/* ===================================== */ + +#elif defined(_MSC_VER) +# if (_MSC_VER >= 900) && (_INTEGRAL_MAX_BITS >= 64) +# define CURL_TYPEOF_CURL_OFF_T __int64 +# define CURL_FORMAT_CURL_OFF_T "I64d" +# define CURL_FORMAT_CURL_OFF_TU "I64u" +# define CURL_SUFFIX_CURL_OFF_T i64 +# define CURL_SUFFIX_CURL_OFF_TU ui64 +# else +# define CURL_TYPEOF_CURL_OFF_T long +# define CURL_FORMAT_CURL_OFF_T "ld" +# define CURL_FORMAT_CURL_OFF_TU "lu" +# define CURL_SUFFIX_CURL_OFF_T L +# define CURL_SUFFIX_CURL_OFF_TU UL +# endif +# define CURL_TYPEOF_CURL_SOCKLEN_T int + +/* ===================================== */ +/* KEEP GENERIC GCC THE LAST ENTRY */ +/* ===================================== */ + +#elif defined(__GNUC__) && !defined(_SCO_DS) +# if !defined(__LP64__) && \ + (defined(__ILP32__) || defined(__i386__) || defined(__hppa__) || \ + defined(__ppc__) || defined(__powerpc__) || defined(__arm__) || \ + defined(__sparc__) || defined(__mips__) || defined(__sh__) || \ + defined(__XTENSA__) || \ + (defined(__SIZEOF_LONG__) && __SIZEOF_LONG__ == 4) || \ + (defined(__LONG_MAX__) && __LONG_MAX__ == 2147483647L)) +# define CURL_TYPEOF_CURL_OFF_T long long +# define CURL_FORMAT_CURL_OFF_T "lld" +# define CURL_FORMAT_CURL_OFF_TU "llu" +# define CURL_SUFFIX_CURL_OFF_T LL +# define CURL_SUFFIX_CURL_OFF_TU ULL +# elif defined(__LP64__) || \ + defined(__x86_64__) || defined(__ppc64__) || defined(__sparc64__) || \ + defined(__e2k__) || \ + (defined(__SIZEOF_LONG__) && __SIZEOF_LONG__ == 8) || \ + (defined(__LONG_MAX__) && __LONG_MAX__ == 9223372036854775807L) +# define CURL_TYPEOF_CURL_OFF_T long +# define CURL_FORMAT_CURL_OFF_T "ld" +# define CURL_FORMAT_CURL_OFF_TU "lu" +# define CURL_SUFFIX_CURL_OFF_T L +# define CURL_SUFFIX_CURL_OFF_TU UL +# endif +# define CURL_TYPEOF_CURL_SOCKLEN_T socklen_t +# define CURL_PULL_SYS_TYPES_H 1 +# define CURL_PULL_SYS_SOCKET_H 1 + +#else +/* generic "safe guess" on old 32 bit style */ +# define CURL_TYPEOF_CURL_OFF_T long +# define CURL_FORMAT_CURL_OFF_T "ld" +# define CURL_FORMAT_CURL_OFF_TU "lu" +# define CURL_SUFFIX_CURL_OFF_T L +# define CURL_SUFFIX_CURL_OFF_TU UL +# define CURL_TYPEOF_CURL_SOCKLEN_T int +#endif + +#ifdef _AIX +/* AIX needs <sys/poll.h> */ +#define CURL_PULL_SYS_POLL_H +#endif + + +/* CURL_PULL_WS2TCPIP_H is defined above when inclusion of header file */ +/* ws2tcpip.h is required here to properly make type definitions below. */ +#ifdef CURL_PULL_WS2TCPIP_H +# include <winsock2.h> +# include <windows.h> +# include <ws2tcpip.h> +#endif + +/* CURL_PULL_SYS_TYPES_H is defined above when inclusion of header file */ +/* sys/types.h is required here to properly make type definitions below. */ +#ifdef CURL_PULL_SYS_TYPES_H +# include <sys/types.h> +#endif + +/* CURL_PULL_SYS_SOCKET_H is defined above when inclusion of header file */ +/* sys/socket.h is required here to properly make type definitions below. */ +#ifdef CURL_PULL_SYS_SOCKET_H +# include <sys/socket.h> +#endif + +/* CURL_PULL_SYS_POLL_H is defined above when inclusion of header file */ +/* sys/poll.h is required here to properly make type definitions below. */ +#ifdef CURL_PULL_SYS_POLL_H +# include <sys/poll.h> +#endif + +/* Data type definition of curl_socklen_t. */ +#ifdef CURL_TYPEOF_CURL_SOCKLEN_T + typedef CURL_TYPEOF_CURL_SOCKLEN_T curl_socklen_t; +#endif + +/* Data type definition of curl_off_t. */ + +#ifdef CURL_TYPEOF_CURL_OFF_T + typedef CURL_TYPEOF_CURL_OFF_T curl_off_t; +#endif + +/* + * CURL_ISOCPP and CURL_OFF_T_C definitions are done here in order to allow + * these to be visible and exported by the external libcurl interface API, + * while also making them visible to the library internals, simply including + * curl_setup.h, without actually needing to include curl.h internally. + * If some day this section would grow big enough, all this should be moved + * to its own header file. + */ + +/* + * Figure out if we can use the ## preprocessor operator, which is supported + * by ISO/ANSI C and C++. Some compilers support it without setting __STDC__ + * or __cplusplus so we need to carefully check for them too. + */ + +#if defined(__STDC__) || defined(_MSC_VER) || defined(__cplusplus) || \ + defined(__HP_aCC) || defined(__BORLANDC__) || defined(__LCC__) || \ + defined(__POCC__) || defined(__SALFORDC__) || defined(__HIGHC__) || \ + defined(__ILEC400__) + /* This compiler is believed to have an ISO compatible preprocessor */ +#define CURL_ISOCPP +#else + /* This compiler is believed NOT to have an ISO compatible preprocessor */ +#undef CURL_ISOCPP +#endif + +/* + * Macros for minimum-width signed and unsigned curl_off_t integer constants. + */ + +#if defined(__BORLANDC__) && (__BORLANDC__ == 0x0551) +# define CURLINC_OFF_T_C_HLPR2(x) x +# define CURLINC_OFF_T_C_HLPR1(x) CURLINC_OFF_T_C_HLPR2(x) +# define CURL_OFF_T_C(Val) CURLINC_OFF_T_C_HLPR1(Val) ## \ + CURLINC_OFF_T_C_HLPR1(CURL_SUFFIX_CURL_OFF_T) +# define CURL_OFF_TU_C(Val) CURLINC_OFF_T_C_HLPR1(Val) ## \ + CURLINC_OFF_T_C_HLPR1(CURL_SUFFIX_CURL_OFF_TU) +#else +# ifdef CURL_ISOCPP +# define CURLINC_OFF_T_C_HLPR2(Val,Suffix) Val ## Suffix +# else +# define CURLINC_OFF_T_C_HLPR2(Val,Suffix) Val/**/Suffix +# endif +# define CURLINC_OFF_T_C_HLPR1(Val,Suffix) CURLINC_OFF_T_C_HLPR2(Val,Suffix) +# define CURL_OFF_T_C(Val) CURLINC_OFF_T_C_HLPR1(Val,CURL_SUFFIX_CURL_OFF_T) +# define CURL_OFF_TU_C(Val) CURLINC_OFF_T_C_HLPR1(Val,CURL_SUFFIX_CURL_OFF_TU) +#endif + +#endif /* CURLINC_SYSTEM_H */ diff --git a/NorthstarDedicatedTest/include/libcurl/include/curl/typecheck-gcc.h b/NorthstarDedicatedTest/include/libcurl/include/curl/typecheck-gcc.h new file mode 100644 index 00000000..9e14d8a3 --- /dev/null +++ b/NorthstarDedicatedTest/include/libcurl/include/curl/typecheck-gcc.h @@ -0,0 +1,707 @@ +#ifndef CURLINC_TYPECHECK_GCC_H +#define CURLINC_TYPECHECK_GCC_H +/*************************************************************************** + * _ _ ____ _ + * Project ___| | | | _ \| | + * / __| | | | |_) | | + * | (__| |_| | _ <| |___ + * \___|\___/|_| \_\_____| + * + * Copyright (C) 1998 - 2021, Daniel Stenberg, <daniel@haxx.se>, et al. + * + * This software is licensed as described in the file COPYING, which + * you should have received as part of this distribution. The terms + * are also available at https://curl.se/docs/copyright.html. + * + * You may opt to use, copy, modify, merge, publish, distribute and/or sell + * copies of the Software, and permit persons to whom the Software is + * furnished to do so, under the terms of the COPYING file. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + ***************************************************************************/ + +/* wraps curl_easy_setopt() with typechecking */ + +/* To add a new kind of warning, add an + * if(curlcheck_sometype_option(_curl_opt)) + * if(!curlcheck_sometype(value)) + * _curl_easy_setopt_err_sometype(); + * block and define curlcheck_sometype_option, curlcheck_sometype and + * _curl_easy_setopt_err_sometype below + * + * NOTE: We use two nested 'if' statements here instead of the && operator, in + * order to work around gcc bug #32061. It affects only gcc 4.3.x/4.4.x + * when compiling with -Wlogical-op. + * + * To add an option that uses the same type as an existing option, you'll just + * need to extend the appropriate _curl_*_option macro + */ +#define curl_easy_setopt(handle, option, value) \ + __extension__({ \ + __typeof__(option) _curl_opt = option; \ + if(__builtin_constant_p(_curl_opt)) { \ + if(curlcheck_long_option(_curl_opt)) \ + if(!curlcheck_long(value)) \ + _curl_easy_setopt_err_long(); \ + if(curlcheck_off_t_option(_curl_opt)) \ + if(!curlcheck_off_t(value)) \ + _curl_easy_setopt_err_curl_off_t(); \ + if(curlcheck_string_option(_curl_opt)) \ + if(!curlcheck_string(value)) \ + _curl_easy_setopt_err_string(); \ + if(curlcheck_write_cb_option(_curl_opt)) \ + if(!curlcheck_write_cb(value)) \ + _curl_easy_setopt_err_write_callback(); \ + if((_curl_opt) == CURLOPT_RESOLVER_START_FUNCTION) \ + if(!curlcheck_resolver_start_callback(value)) \ + _curl_easy_setopt_err_resolver_start_callback(); \ + if((_curl_opt) == CURLOPT_READFUNCTION) \ + if(!curlcheck_read_cb(value)) \ + _curl_easy_setopt_err_read_cb(); \ + if((_curl_opt) == CURLOPT_IOCTLFUNCTION) \ + if(!curlcheck_ioctl_cb(value)) \ + _curl_easy_setopt_err_ioctl_cb(); \ + if((_curl_opt) == CURLOPT_SOCKOPTFUNCTION) \ + if(!curlcheck_sockopt_cb(value)) \ + _curl_easy_setopt_err_sockopt_cb(); \ + if((_curl_opt) == CURLOPT_OPENSOCKETFUNCTION) \ + if(!curlcheck_opensocket_cb(value)) \ + _curl_easy_setopt_err_opensocket_cb(); \ + if((_curl_opt) == CURLOPT_PROGRESSFUNCTION) \ + if(!curlcheck_progress_cb(value)) \ + _curl_easy_setopt_err_progress_cb(); \ + if((_curl_opt) == CURLOPT_DEBUGFUNCTION) \ + if(!curlcheck_debug_cb(value)) \ + _curl_easy_setopt_err_debug_cb(); \ + if((_curl_opt) == CURLOPT_SSL_CTX_FUNCTION) \ + if(!curlcheck_ssl_ctx_cb(value)) \ + _curl_easy_setopt_err_ssl_ctx_cb(); \ + if(curlcheck_conv_cb_option(_curl_opt)) \ + if(!curlcheck_conv_cb(value)) \ + _curl_easy_setopt_err_conv_cb(); \ + if((_curl_opt) == CURLOPT_SEEKFUNCTION) \ + if(!curlcheck_seek_cb(value)) \ + _curl_easy_setopt_err_seek_cb(); \ + if(curlcheck_cb_data_option(_curl_opt)) \ + if(!curlcheck_cb_data(value)) \ + _curl_easy_setopt_err_cb_data(); \ + if((_curl_opt) == CURLOPT_ERRORBUFFER) \ + if(!curlcheck_error_buffer(value)) \ + _curl_easy_setopt_err_error_buffer(); \ + if((_curl_opt) == CURLOPT_STDERR) \ + if(!curlcheck_FILE(value)) \ + _curl_easy_setopt_err_FILE(); \ + if(curlcheck_postfields_option(_curl_opt)) \ + if(!curlcheck_postfields(value)) \ + _curl_easy_setopt_err_postfields(); \ + if((_curl_opt) == CURLOPT_HTTPPOST) \ + if(!curlcheck_arr((value), struct curl_httppost)) \ + _curl_easy_setopt_err_curl_httpost(); \ + if((_curl_opt) == CURLOPT_MIMEPOST) \ + if(!curlcheck_ptr((value), curl_mime)) \ + _curl_easy_setopt_err_curl_mimepost(); \ + if(curlcheck_slist_option(_curl_opt)) \ + if(!curlcheck_arr((value), struct curl_slist)) \ + _curl_easy_setopt_err_curl_slist(); \ + if((_curl_opt) == CURLOPT_SHARE) \ + if(!curlcheck_ptr((value), CURLSH)) \ + _curl_easy_setopt_err_CURLSH(); \ + } \ + curl_easy_setopt(handle, _curl_opt, value); \ + }) + +/* wraps curl_easy_getinfo() with typechecking */ +#define curl_easy_getinfo(handle, info, arg) \ + __extension__({ \ + __typeof__(info) _curl_info = info; \ + if(__builtin_constant_p(_curl_info)) { \ + if(curlcheck_string_info(_curl_info)) \ + if(!curlcheck_arr((arg), char *)) \ + _curl_easy_getinfo_err_string(); \ + if(curlcheck_long_info(_curl_info)) \ + if(!curlcheck_arr((arg), long)) \ + _curl_easy_getinfo_err_long(); \ + if(curlcheck_double_info(_curl_info)) \ + if(!curlcheck_arr((arg), double)) \ + _curl_easy_getinfo_err_double(); \ + if(curlcheck_slist_info(_curl_info)) \ + if(!curlcheck_arr((arg), struct curl_slist *)) \ + _curl_easy_getinfo_err_curl_slist(); \ + if(curlcheck_tlssessioninfo_info(_curl_info)) \ + if(!curlcheck_arr((arg), struct curl_tlssessioninfo *)) \ + _curl_easy_getinfo_err_curl_tlssesssioninfo(); \ + if(curlcheck_certinfo_info(_curl_info)) \ + if(!curlcheck_arr((arg), struct curl_certinfo *)) \ + _curl_easy_getinfo_err_curl_certinfo(); \ + if(curlcheck_socket_info(_curl_info)) \ + if(!curlcheck_arr((arg), curl_socket_t)) \ + _curl_easy_getinfo_err_curl_socket(); \ + if(curlcheck_off_t_info(_curl_info)) \ + if(!curlcheck_arr((arg), curl_off_t)) \ + _curl_easy_getinfo_err_curl_off_t(); \ + } \ + curl_easy_getinfo(handle, _curl_info, arg); \ + }) + +/* + * For now, just make sure that the functions are called with three arguments + */ +#define curl_share_setopt(share,opt,param) curl_share_setopt(share,opt,param) +#define curl_multi_setopt(handle,opt,param) curl_multi_setopt(handle,opt,param) + + +/* the actual warnings, triggered by calling the _curl_easy_setopt_err* + * functions */ + +/* To define a new warning, use _CURL_WARNING(identifier, "message") */ +#define CURLWARNING(id, message) \ + static void __attribute__((__warning__(message))) \ + __attribute__((__unused__)) __attribute__((__noinline__)) \ + id(void) { __asm__(""); } + +CURLWARNING(_curl_easy_setopt_err_long, + "curl_easy_setopt expects a long argument for this option") +CURLWARNING(_curl_easy_setopt_err_curl_off_t, + "curl_easy_setopt expects a curl_off_t argument for this option") +CURLWARNING(_curl_easy_setopt_err_string, + "curl_easy_setopt expects a " + "string ('char *' or char[]) argument for this option" + ) +CURLWARNING(_curl_easy_setopt_err_write_callback, + "curl_easy_setopt expects a curl_write_callback argument for this option") +CURLWARNING(_curl_easy_setopt_err_resolver_start_callback, + "curl_easy_setopt expects a " + "curl_resolver_start_callback argument for this option" + ) +CURLWARNING(_curl_easy_setopt_err_read_cb, + "curl_easy_setopt expects a curl_read_callback argument for this option") +CURLWARNING(_curl_easy_setopt_err_ioctl_cb, + "curl_easy_setopt expects a curl_ioctl_callback argument for this option") +CURLWARNING(_curl_easy_setopt_err_sockopt_cb, + "curl_easy_setopt expects a curl_sockopt_callback argument for this option") +CURLWARNING(_curl_easy_setopt_err_opensocket_cb, + "curl_easy_setopt expects a " + "curl_opensocket_callback argument for this option" + ) +CURLWARNING(_curl_easy_setopt_err_progress_cb, + "curl_easy_setopt expects a curl_progress_callback argument for this option") +CURLWARNING(_curl_easy_setopt_err_debug_cb, + "curl_easy_setopt expects a curl_debug_callback argument for this option") +CURLWARNING(_curl_easy_setopt_err_ssl_ctx_cb, + "curl_easy_setopt expects a curl_ssl_ctx_callback argument for this option") +CURLWARNING(_curl_easy_setopt_err_conv_cb, + "curl_easy_setopt expects a curl_conv_callback argument for this option") +CURLWARNING(_curl_easy_setopt_err_seek_cb, + "curl_easy_setopt expects a curl_seek_callback argument for this option") +CURLWARNING(_curl_easy_setopt_err_cb_data, + "curl_easy_setopt expects a " + "private data pointer as argument for this option") +CURLWARNING(_curl_easy_setopt_err_error_buffer, + "curl_easy_setopt expects a " + "char buffer of CURL_ERROR_SIZE as argument for this option") +CURLWARNING(_curl_easy_setopt_err_FILE, + "curl_easy_setopt expects a 'FILE *' argument for this option") +CURLWARNING(_curl_easy_setopt_err_postfields, + "curl_easy_setopt expects a 'void *' or 'char *' argument for this option") +CURLWARNING(_curl_easy_setopt_err_curl_httpost, + "curl_easy_setopt expects a 'struct curl_httppost *' " + "argument for this option") +CURLWARNING(_curl_easy_setopt_err_curl_mimepost, + "curl_easy_setopt expects a 'curl_mime *' " + "argument for this option") +CURLWARNING(_curl_easy_setopt_err_curl_slist, + "curl_easy_setopt expects a 'struct curl_slist *' argument for this option") +CURLWARNING(_curl_easy_setopt_err_CURLSH, + "curl_easy_setopt expects a CURLSH* argument for this option") + +CURLWARNING(_curl_easy_getinfo_err_string, + "curl_easy_getinfo expects a pointer to 'char *' for this info") +CURLWARNING(_curl_easy_getinfo_err_long, + "curl_easy_getinfo expects a pointer to long for this info") +CURLWARNING(_curl_easy_getinfo_err_double, + "curl_easy_getinfo expects a pointer to double for this info") +CURLWARNING(_curl_easy_getinfo_err_curl_slist, + "curl_easy_getinfo expects a pointer to 'struct curl_slist *' for this info") +CURLWARNING(_curl_easy_getinfo_err_curl_tlssesssioninfo, + "curl_easy_getinfo expects a pointer to " + "'struct curl_tlssessioninfo *' for this info") +CURLWARNING(_curl_easy_getinfo_err_curl_certinfo, + "curl_easy_getinfo expects a pointer to " + "'struct curl_certinfo *' for this info") +CURLWARNING(_curl_easy_getinfo_err_curl_socket, + "curl_easy_getinfo expects a pointer to curl_socket_t for this info") +CURLWARNING(_curl_easy_getinfo_err_curl_off_t, + "curl_easy_getinfo expects a pointer to curl_off_t for this info") + +/* groups of curl_easy_setops options that take the same type of argument */ + +/* To add a new option to one of the groups, just add + * (option) == CURLOPT_SOMETHING + * to the or-expression. If the option takes a long or curl_off_t, you don't + * have to do anything + */ + +/* evaluates to true if option takes a long argument */ +#define curlcheck_long_option(option) \ + (0 < (option) && (option) < CURLOPTTYPE_OBJECTPOINT) + +#define curlcheck_off_t_option(option) \ + (((option) > CURLOPTTYPE_OFF_T) && ((option) < CURLOPTTYPE_BLOB)) + +/* evaluates to true if option takes a char* argument */ +#define curlcheck_string_option(option) \ + ((option) == CURLOPT_ABSTRACT_UNIX_SOCKET || \ + (option) == CURLOPT_ACCEPT_ENCODING || \ + (option) == CURLOPT_ALTSVC || \ + (option) == CURLOPT_CAINFO || \ + (option) == CURLOPT_CAPATH || \ + (option) == CURLOPT_COOKIE || \ + (option) == CURLOPT_COOKIEFILE || \ + (option) == CURLOPT_COOKIEJAR || \ + (option) == CURLOPT_COOKIELIST || \ + (option) == CURLOPT_CRLFILE || \ + (option) == CURLOPT_CUSTOMREQUEST || \ + (option) == CURLOPT_DEFAULT_PROTOCOL || \ + (option) == CURLOPT_DNS_INTERFACE || \ + (option) == CURLOPT_DNS_LOCAL_IP4 || \ + (option) == CURLOPT_DNS_LOCAL_IP6 || \ + (option) == CURLOPT_DNS_SERVERS || \ + (option) == CURLOPT_DOH_URL || \ + (option) == CURLOPT_EGDSOCKET || \ + (option) == CURLOPT_FTPPORT || \ + (option) == CURLOPT_FTP_ACCOUNT || \ + (option) == CURLOPT_FTP_ALTERNATIVE_TO_USER || \ + (option) == CURLOPT_HSTS || \ + (option) == CURLOPT_INTERFACE || \ + (option) == CURLOPT_ISSUERCERT || \ + (option) == CURLOPT_KEYPASSWD || \ + (option) == CURLOPT_KRBLEVEL || \ + (option) == CURLOPT_LOGIN_OPTIONS || \ + (option) == CURLOPT_MAIL_AUTH || \ + (option) == CURLOPT_MAIL_FROM || \ + (option) == CURLOPT_NETRC_FILE || \ + (option) == CURLOPT_NOPROXY || \ + (option) == CURLOPT_PASSWORD || \ + (option) == CURLOPT_PINNEDPUBLICKEY || \ + (option) == CURLOPT_PRE_PROXY || \ + (option) == CURLOPT_PROXY || \ + (option) == CURLOPT_PROXYPASSWORD || \ + (option) == CURLOPT_PROXYUSERNAME || \ + (option) == CURLOPT_PROXYUSERPWD || \ + (option) == CURLOPT_PROXY_CAINFO || \ + (option) == CURLOPT_PROXY_CAPATH || \ + (option) == CURLOPT_PROXY_CRLFILE || \ + (option) == CURLOPT_PROXY_ISSUERCERT || \ + (option) == CURLOPT_PROXY_KEYPASSWD || \ + (option) == CURLOPT_PROXY_PINNEDPUBLICKEY || \ + (option) == CURLOPT_PROXY_SERVICE_NAME || \ + (option) == CURLOPT_PROXY_SSLCERT || \ + (option) == CURLOPT_PROXY_SSLCERTTYPE || \ + (option) == CURLOPT_PROXY_SSLKEY || \ + (option) == CURLOPT_PROXY_SSLKEYTYPE || \ + (option) == CURLOPT_PROXY_SSL_CIPHER_LIST || \ + (option) == CURLOPT_PROXY_TLS13_CIPHERS || \ + (option) == CURLOPT_PROXY_TLSAUTH_PASSWORD || \ + (option) == CURLOPT_PROXY_TLSAUTH_TYPE || \ + (option) == CURLOPT_PROXY_TLSAUTH_USERNAME || \ + (option) == CURLOPT_RANDOM_FILE || \ + (option) == CURLOPT_RANGE || \ + (option) == CURLOPT_REFERER || \ + (option) == CURLOPT_REQUEST_TARGET || \ + (option) == CURLOPT_RTSP_SESSION_ID || \ + (option) == CURLOPT_RTSP_STREAM_URI || \ + (option) == CURLOPT_RTSP_TRANSPORT || \ + (option) == CURLOPT_SASL_AUTHZID || \ + (option) == CURLOPT_SERVICE_NAME || \ + (option) == CURLOPT_SOCKS5_GSSAPI_SERVICE || \ + (option) == CURLOPT_SSH_HOST_PUBLIC_KEY_MD5 || \ + (option) == CURLOPT_SSH_HOST_PUBLIC_KEY_SHA256 || \ + (option) == CURLOPT_SSH_KNOWNHOSTS || \ + (option) == CURLOPT_SSH_PRIVATE_KEYFILE || \ + (option) == CURLOPT_SSH_PUBLIC_KEYFILE || \ + (option) == CURLOPT_SSLCERT || \ + (option) == CURLOPT_SSLCERTTYPE || \ + (option) == CURLOPT_SSLENGINE || \ + (option) == CURLOPT_SSLKEY || \ + (option) == CURLOPT_SSLKEYTYPE || \ + (option) == CURLOPT_SSL_CIPHER_LIST || \ + (option) == CURLOPT_TLS13_CIPHERS || \ + (option) == CURLOPT_TLSAUTH_PASSWORD || \ + (option) == CURLOPT_TLSAUTH_TYPE || \ + (option) == CURLOPT_TLSAUTH_USERNAME || \ + (option) == CURLOPT_UNIX_SOCKET_PATH || \ + (option) == CURLOPT_URL || \ + (option) == CURLOPT_USERAGENT || \ + (option) == CURLOPT_USERNAME || \ + (option) == CURLOPT_AWS_SIGV4 || \ + (option) == CURLOPT_USERPWD || \ + (option) == CURLOPT_XOAUTH2_BEARER || \ + (option) == CURLOPT_SSL_EC_CURVES || \ + 0) + +/* evaluates to true if option takes a curl_write_callback argument */ +#define curlcheck_write_cb_option(option) \ + ((option) == CURLOPT_HEADERFUNCTION || \ + (option) == CURLOPT_WRITEFUNCTION) + +/* evaluates to true if option takes a curl_conv_callback argument */ +#define curlcheck_conv_cb_option(option) \ + ((option) == CURLOPT_CONV_TO_NETWORK_FUNCTION || \ + (option) == CURLOPT_CONV_FROM_NETWORK_FUNCTION || \ + (option) == CURLOPT_CONV_FROM_UTF8_FUNCTION) + +/* evaluates to true if option takes a data argument to pass to a callback */ +#define curlcheck_cb_data_option(option) \ + ((option) == CURLOPT_CHUNK_DATA || \ + (option) == CURLOPT_CLOSESOCKETDATA || \ + (option) == CURLOPT_DEBUGDATA || \ + (option) == CURLOPT_FNMATCH_DATA || \ + (option) == CURLOPT_HEADERDATA || \ + (option) == CURLOPT_HSTSREADDATA || \ + (option) == CURLOPT_HSTSWRITEDATA || \ + (option) == CURLOPT_INTERLEAVEDATA || \ + (option) == CURLOPT_IOCTLDATA || \ + (option) == CURLOPT_OPENSOCKETDATA || \ + (option) == CURLOPT_PREREQDATA || \ + (option) == CURLOPT_PROGRESSDATA || \ + (option) == CURLOPT_READDATA || \ + (option) == CURLOPT_SEEKDATA || \ + (option) == CURLOPT_SOCKOPTDATA || \ + (option) == CURLOPT_SSH_KEYDATA || \ + (option) == CURLOPT_SSL_CTX_DATA || \ + (option) == CURLOPT_WRITEDATA || \ + (option) == CURLOPT_RESOLVER_START_DATA || \ + (option) == CURLOPT_TRAILERDATA || \ + 0) + +/* evaluates to true if option takes a POST data argument (void* or char*) */ +#define curlcheck_postfields_option(option) \ + ((option) == CURLOPT_POSTFIELDS || \ + (option) == CURLOPT_COPYPOSTFIELDS || \ + 0) + +/* evaluates to true if option takes a struct curl_slist * argument */ +#define curlcheck_slist_option(option) \ + ((option) == CURLOPT_HTTP200ALIASES || \ + (option) == CURLOPT_HTTPHEADER || \ + (option) == CURLOPT_MAIL_RCPT || \ + (option) == CURLOPT_POSTQUOTE || \ + (option) == CURLOPT_PREQUOTE || \ + (option) == CURLOPT_PROXYHEADER || \ + (option) == CURLOPT_QUOTE || \ + (option) == CURLOPT_RESOLVE || \ + (option) == CURLOPT_TELNETOPTIONS || \ + (option) == CURLOPT_CONNECT_TO || \ + 0) + +/* groups of curl_easy_getinfo infos that take the same type of argument */ + +/* evaluates to true if info expects a pointer to char * argument */ +#define curlcheck_string_info(info) \ + (CURLINFO_STRING < (info) && (info) < CURLINFO_LONG && \ + (info) != CURLINFO_PRIVATE) + +/* evaluates to true if info expects a pointer to long argument */ +#define curlcheck_long_info(info) \ + (CURLINFO_LONG < (info) && (info) < CURLINFO_DOUBLE) + +/* evaluates to true if info expects a pointer to double argument */ +#define curlcheck_double_info(info) \ + (CURLINFO_DOUBLE < (info) && (info) < CURLINFO_SLIST) + +/* true if info expects a pointer to struct curl_slist * argument */ +#define curlcheck_slist_info(info) \ + (((info) == CURLINFO_SSL_ENGINES) || ((info) == CURLINFO_COOKIELIST)) + +/* true if info expects a pointer to struct curl_tlssessioninfo * argument */ +#define curlcheck_tlssessioninfo_info(info) \ + (((info) == CURLINFO_TLS_SSL_PTR) || ((info) == CURLINFO_TLS_SESSION)) + +/* true if info expects a pointer to struct curl_certinfo * argument */ +#define curlcheck_certinfo_info(info) ((info) == CURLINFO_CERTINFO) + +/* true if info expects a pointer to struct curl_socket_t argument */ +#define curlcheck_socket_info(info) \ + (CURLINFO_SOCKET < (info) && (info) < CURLINFO_OFF_T) + +/* true if info expects a pointer to curl_off_t argument */ +#define curlcheck_off_t_info(info) \ + (CURLINFO_OFF_T < (info)) + + +/* typecheck helpers -- check whether given expression has requested type*/ + +/* For pointers, you can use the curlcheck_ptr/curlcheck_arr macros, + * otherwise define a new macro. Search for __builtin_types_compatible_p + * in the GCC manual. + * NOTE: these macros MUST NOT EVALUATE their arguments! The argument is + * the actual expression passed to the curl_easy_setopt macro. This + * means that you can only apply the sizeof and __typeof__ operators, no + * == or whatsoever. + */ + +/* XXX: should evaluate to true if expr is a pointer */ +#define curlcheck_any_ptr(expr) \ + (sizeof(expr) == sizeof(void *)) + +/* evaluates to true if expr is NULL */ +/* XXX: must not evaluate expr, so this check is not accurate */ +#define curlcheck_NULL(expr) \ + (__builtin_types_compatible_p(__typeof__(expr), __typeof__(NULL))) + +/* evaluates to true if expr is type*, const type* or NULL */ +#define curlcheck_ptr(expr, type) \ + (curlcheck_NULL(expr) || \ + __builtin_types_compatible_p(__typeof__(expr), type *) || \ + __builtin_types_compatible_p(__typeof__(expr), const type *)) + +/* evaluates to true if expr is one of type[], type*, NULL or const type* */ +#define curlcheck_arr(expr, type) \ + (curlcheck_ptr((expr), type) || \ + __builtin_types_compatible_p(__typeof__(expr), type [])) + +/* evaluates to true if expr is a string */ +#define curlcheck_string(expr) \ + (curlcheck_arr((expr), char) || \ + curlcheck_arr((expr), signed char) || \ + curlcheck_arr((expr), unsigned char)) + +/* evaluates to true if expr is a long (no matter the signedness) + * XXX: for now, int is also accepted (and therefore short and char, which + * are promoted to int when passed to a variadic function) */ +#define curlcheck_long(expr) \ + (__builtin_types_compatible_p(__typeof__(expr), long) || \ + __builtin_types_compatible_p(__typeof__(expr), signed long) || \ + __builtin_types_compatible_p(__typeof__(expr), unsigned long) || \ + __builtin_types_compatible_p(__typeof__(expr), int) || \ + __builtin_types_compatible_p(__typeof__(expr), signed int) || \ + __builtin_types_compatible_p(__typeof__(expr), unsigned int) || \ + __builtin_types_compatible_p(__typeof__(expr), short) || \ + __builtin_types_compatible_p(__typeof__(expr), signed short) || \ + __builtin_types_compatible_p(__typeof__(expr), unsigned short) || \ + __builtin_types_compatible_p(__typeof__(expr), char) || \ + __builtin_types_compatible_p(__typeof__(expr), signed char) || \ + __builtin_types_compatible_p(__typeof__(expr), unsigned char)) + +/* evaluates to true if expr is of type curl_off_t */ +#define curlcheck_off_t(expr) \ + (__builtin_types_compatible_p(__typeof__(expr), curl_off_t)) + +/* evaluates to true if expr is abuffer suitable for CURLOPT_ERRORBUFFER */ +/* XXX: also check size of an char[] array? */ +#define curlcheck_error_buffer(expr) \ + (curlcheck_NULL(expr) || \ + __builtin_types_compatible_p(__typeof__(expr), char *) || \ + __builtin_types_compatible_p(__typeof__(expr), char[])) + +/* evaluates to true if expr is of type (const) void* or (const) FILE* */ +#if 0 +#define curlcheck_cb_data(expr) \ + (curlcheck_ptr((expr), void) || \ + curlcheck_ptr((expr), FILE)) +#else /* be less strict */ +#define curlcheck_cb_data(expr) \ + curlcheck_any_ptr(expr) +#endif + +/* evaluates to true if expr is of type FILE* */ +#define curlcheck_FILE(expr) \ + (curlcheck_NULL(expr) || \ + (__builtin_types_compatible_p(__typeof__(expr), FILE *))) + +/* evaluates to true if expr can be passed as POST data (void* or char*) */ +#define curlcheck_postfields(expr) \ + (curlcheck_ptr((expr), void) || \ + curlcheck_arr((expr), char) || \ + curlcheck_arr((expr), unsigned char)) + +/* helper: __builtin_types_compatible_p distinguishes between functions and + * function pointers, hide it */ +#define curlcheck_cb_compatible(func, type) \ + (__builtin_types_compatible_p(__typeof__(func), type) || \ + __builtin_types_compatible_p(__typeof__(func) *, type)) + +/* evaluates to true if expr is of type curl_resolver_start_callback */ +#define curlcheck_resolver_start_callback(expr) \ + (curlcheck_NULL(expr) || \ + curlcheck_cb_compatible((expr), curl_resolver_start_callback)) + +/* evaluates to true if expr is of type curl_read_callback or "similar" */ +#define curlcheck_read_cb(expr) \ + (curlcheck_NULL(expr) || \ + curlcheck_cb_compatible((expr), __typeof__(fread) *) || \ + curlcheck_cb_compatible((expr), curl_read_callback) || \ + curlcheck_cb_compatible((expr), _curl_read_callback1) || \ + curlcheck_cb_compatible((expr), _curl_read_callback2) || \ + curlcheck_cb_compatible((expr), _curl_read_callback3) || \ + curlcheck_cb_compatible((expr), _curl_read_callback4) || \ + curlcheck_cb_compatible((expr), _curl_read_callback5) || \ + curlcheck_cb_compatible((expr), _curl_read_callback6)) +typedef size_t (*_curl_read_callback1)(char *, size_t, size_t, void *); +typedef size_t (*_curl_read_callback2)(char *, size_t, size_t, const void *); +typedef size_t (*_curl_read_callback3)(char *, size_t, size_t, FILE *); +typedef size_t (*_curl_read_callback4)(void *, size_t, size_t, void *); +typedef size_t (*_curl_read_callback5)(void *, size_t, size_t, const void *); +typedef size_t (*_curl_read_callback6)(void *, size_t, size_t, FILE *); + +/* evaluates to true if expr is of type curl_write_callback or "similar" */ +#define curlcheck_write_cb(expr) \ + (curlcheck_read_cb(expr) || \ + curlcheck_cb_compatible((expr), __typeof__(fwrite) *) || \ + curlcheck_cb_compatible((expr), curl_write_callback) || \ + curlcheck_cb_compatible((expr), _curl_write_callback1) || \ + curlcheck_cb_compatible((expr), _curl_write_callback2) || \ + curlcheck_cb_compatible((expr), _curl_write_callback3) || \ + curlcheck_cb_compatible((expr), _curl_write_callback4) || \ + curlcheck_cb_compatible((expr), _curl_write_callback5) || \ + curlcheck_cb_compatible((expr), _curl_write_callback6)) +typedef size_t (*_curl_write_callback1)(const char *, size_t, size_t, void *); +typedef size_t (*_curl_write_callback2)(const char *, size_t, size_t, + const void *); +typedef size_t (*_curl_write_callback3)(const char *, size_t, size_t, FILE *); +typedef size_t (*_curl_write_callback4)(const void *, size_t, size_t, void *); +typedef size_t (*_curl_write_callback5)(const void *, size_t, size_t, + const void *); +typedef size_t (*_curl_write_callback6)(const void *, size_t, size_t, FILE *); + +/* evaluates to true if expr is of type curl_ioctl_callback or "similar" */ +#define curlcheck_ioctl_cb(expr) \ + (curlcheck_NULL(expr) || \ + curlcheck_cb_compatible((expr), curl_ioctl_callback) || \ + curlcheck_cb_compatible((expr), _curl_ioctl_callback1) || \ + curlcheck_cb_compatible((expr), _curl_ioctl_callback2) || \ + curlcheck_cb_compatible((expr), _curl_ioctl_callback3) || \ + curlcheck_cb_compatible((expr), _curl_ioctl_callback4)) +typedef curlioerr (*_curl_ioctl_callback1)(CURL *, int, void *); +typedef curlioerr (*_curl_ioctl_callback2)(CURL *, int, const void *); +typedef curlioerr (*_curl_ioctl_callback3)(CURL *, curliocmd, void *); +typedef curlioerr (*_curl_ioctl_callback4)(CURL *, curliocmd, const void *); + +/* evaluates to true if expr is of type curl_sockopt_callback or "similar" */ +#define curlcheck_sockopt_cb(expr) \ + (curlcheck_NULL(expr) || \ + curlcheck_cb_compatible((expr), curl_sockopt_callback) || \ + curlcheck_cb_compatible((expr), _curl_sockopt_callback1) || \ + curlcheck_cb_compatible((expr), _curl_sockopt_callback2)) +typedef int (*_curl_sockopt_callback1)(void *, curl_socket_t, curlsocktype); +typedef int (*_curl_sockopt_callback2)(const void *, curl_socket_t, + curlsocktype); + +/* evaluates to true if expr is of type curl_opensocket_callback or + "similar" */ +#define curlcheck_opensocket_cb(expr) \ + (curlcheck_NULL(expr) || \ + curlcheck_cb_compatible((expr), curl_opensocket_callback) || \ + curlcheck_cb_compatible((expr), _curl_opensocket_callback1) || \ + curlcheck_cb_compatible((expr), _curl_opensocket_callback2) || \ + curlcheck_cb_compatible((expr), _curl_opensocket_callback3) || \ + curlcheck_cb_compatible((expr), _curl_opensocket_callback4)) +typedef curl_socket_t (*_curl_opensocket_callback1) + (void *, curlsocktype, struct curl_sockaddr *); +typedef curl_socket_t (*_curl_opensocket_callback2) + (void *, curlsocktype, const struct curl_sockaddr *); +typedef curl_socket_t (*_curl_opensocket_callback3) + (const void *, curlsocktype, struct curl_sockaddr *); +typedef curl_socket_t (*_curl_opensocket_callback4) + (const void *, curlsocktype, const struct curl_sockaddr *); + +/* evaluates to true if expr is of type curl_progress_callback or "similar" */ +#define curlcheck_progress_cb(expr) \ + (curlcheck_NULL(expr) || \ + curlcheck_cb_compatible((expr), curl_progress_callback) || \ + curlcheck_cb_compatible((expr), _curl_progress_callback1) || \ + curlcheck_cb_compatible((expr), _curl_progress_callback2)) +typedef int (*_curl_progress_callback1)(void *, + double, double, double, double); +typedef int (*_curl_progress_callback2)(const void *, + double, double, double, double); + +/* evaluates to true if expr is of type curl_debug_callback or "similar" */ +#define curlcheck_debug_cb(expr) \ + (curlcheck_NULL(expr) || \ + curlcheck_cb_compatible((expr), curl_debug_callback) || \ + curlcheck_cb_compatible((expr), _curl_debug_callback1) || \ + curlcheck_cb_compatible((expr), _curl_debug_callback2) || \ + curlcheck_cb_compatible((expr), _curl_debug_callback3) || \ + curlcheck_cb_compatible((expr), _curl_debug_callback4) || \ + curlcheck_cb_compatible((expr), _curl_debug_callback5) || \ + curlcheck_cb_compatible((expr), _curl_debug_callback6) || \ + curlcheck_cb_compatible((expr), _curl_debug_callback7) || \ + curlcheck_cb_compatible((expr), _curl_debug_callback8)) +typedef int (*_curl_debug_callback1) (CURL *, + curl_infotype, char *, size_t, void *); +typedef int (*_curl_debug_callback2) (CURL *, + curl_infotype, char *, size_t, const void *); +typedef int (*_curl_debug_callback3) (CURL *, + curl_infotype, const char *, size_t, void *); +typedef int (*_curl_debug_callback4) (CURL *, + curl_infotype, const char *, size_t, const void *); +typedef int (*_curl_debug_callback5) (CURL *, + curl_infotype, unsigned char *, size_t, void *); +typedef int (*_curl_debug_callback6) (CURL *, + curl_infotype, unsigned char *, size_t, const void *); +typedef int (*_curl_debug_callback7) (CURL *, + curl_infotype, const unsigned char *, size_t, void *); +typedef int (*_curl_debug_callback8) (CURL *, + curl_infotype, const unsigned char *, size_t, const void *); + +/* evaluates to true if expr is of type curl_ssl_ctx_callback or "similar" */ +/* this is getting even messier... */ +#define curlcheck_ssl_ctx_cb(expr) \ + (curlcheck_NULL(expr) || \ + curlcheck_cb_compatible((expr), curl_ssl_ctx_callback) || \ + curlcheck_cb_compatible((expr), _curl_ssl_ctx_callback1) || \ + curlcheck_cb_compatible((expr), _curl_ssl_ctx_callback2) || \ + curlcheck_cb_compatible((expr), _curl_ssl_ctx_callback3) || \ + curlcheck_cb_compatible((expr), _curl_ssl_ctx_callback4) || \ + curlcheck_cb_compatible((expr), _curl_ssl_ctx_callback5) || \ + curlcheck_cb_compatible((expr), _curl_ssl_ctx_callback6) || \ + curlcheck_cb_compatible((expr), _curl_ssl_ctx_callback7) || \ + curlcheck_cb_compatible((expr), _curl_ssl_ctx_callback8)) +typedef CURLcode (*_curl_ssl_ctx_callback1)(CURL *, void *, void *); +typedef CURLcode (*_curl_ssl_ctx_callback2)(CURL *, void *, const void *); +typedef CURLcode (*_curl_ssl_ctx_callback3)(CURL *, const void *, void *); +typedef CURLcode (*_curl_ssl_ctx_callback4)(CURL *, const void *, + const void *); +#ifdef HEADER_SSL_H +/* hack: if we included OpenSSL's ssl.h, we know about SSL_CTX + * this will of course break if we're included before OpenSSL headers... + */ +typedef CURLcode (*_curl_ssl_ctx_callback5)(CURL *, SSL_CTX *, void *); +typedef CURLcode (*_curl_ssl_ctx_callback6)(CURL *, SSL_CTX *, const void *); +typedef CURLcode (*_curl_ssl_ctx_callback7)(CURL *, const SSL_CTX *, void *); +typedef CURLcode (*_curl_ssl_ctx_callback8)(CURL *, const SSL_CTX *, + const void *); +#else +typedef _curl_ssl_ctx_callback1 _curl_ssl_ctx_callback5; +typedef _curl_ssl_ctx_callback1 _curl_ssl_ctx_callback6; +typedef _curl_ssl_ctx_callback1 _curl_ssl_ctx_callback7; +typedef _curl_ssl_ctx_callback1 _curl_ssl_ctx_callback8; +#endif + +/* evaluates to true if expr is of type curl_conv_callback or "similar" */ +#define curlcheck_conv_cb(expr) \ + (curlcheck_NULL(expr) || \ + curlcheck_cb_compatible((expr), curl_conv_callback) || \ + curlcheck_cb_compatible((expr), _curl_conv_callback1) || \ + curlcheck_cb_compatible((expr), _curl_conv_callback2) || \ + curlcheck_cb_compatible((expr), _curl_conv_callback3) || \ + curlcheck_cb_compatible((expr), _curl_conv_callback4)) +typedef CURLcode (*_curl_conv_callback1)(char *, size_t length); +typedef CURLcode (*_curl_conv_callback2)(const char *, size_t length); +typedef CURLcode (*_curl_conv_callback3)(void *, size_t length); +typedef CURLcode (*_curl_conv_callback4)(const void *, size_t length); + +/* evaluates to true if expr is of type curl_seek_callback or "similar" */ +#define curlcheck_seek_cb(expr) \ + (curlcheck_NULL(expr) || \ + curlcheck_cb_compatible((expr), curl_seek_callback) || \ + curlcheck_cb_compatible((expr), _curl_seek_callback1) || \ + curlcheck_cb_compatible((expr), _curl_seek_callback2)) +typedef CURLcode (*_curl_seek_callback1)(void *, curl_off_t, int); +typedef CURLcode (*_curl_seek_callback2)(const void *, curl_off_t, int); + + +#endif /* CURLINC_TYPECHECK_GCC_H */ diff --git a/NorthstarDedicatedTest/include/libcurl/include/curl/urlapi.h b/NorthstarDedicatedTest/include/libcurl/include/curl/urlapi.h new file mode 100644 index 00000000..a475f91b --- /dev/null +++ b/NorthstarDedicatedTest/include/libcurl/include/curl/urlapi.h @@ -0,0 +1,145 @@ +#ifndef CURLINC_URLAPI_H +#define CURLINC_URLAPI_H +/*************************************************************************** + * _ _ ____ _ + * Project ___| | | | _ \| | + * / __| | | | |_) | | + * | (__| |_| | _ <| |___ + * \___|\___/|_| \_\_____| + * + * Copyright (C) 2018 - 2021, Daniel Stenberg, <daniel@haxx.se>, et al. + * + * This software is licensed as described in the file COPYING, which + * you should have received as part of this distribution. The terms + * are also available at https://curl.se/docs/copyright.html. + * + * You may opt to use, copy, modify, merge, publish, distribute and/or sell + * copies of the Software, and permit persons to whom the Software is + * furnished to do so, under the terms of the COPYING file. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + ***************************************************************************/ + +#include "curl.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/* the error codes for the URL API */ +typedef enum { + CURLUE_OK, + CURLUE_BAD_HANDLE, /* 1 */ + CURLUE_BAD_PARTPOINTER, /* 2 */ + CURLUE_MALFORMED_INPUT, /* 3 */ + CURLUE_BAD_PORT_NUMBER, /* 4 */ + CURLUE_UNSUPPORTED_SCHEME, /* 5 */ + CURLUE_URLDECODE, /* 6 */ + CURLUE_OUT_OF_MEMORY, /* 7 */ + CURLUE_USER_NOT_ALLOWED, /* 8 */ + CURLUE_UNKNOWN_PART, /* 9 */ + CURLUE_NO_SCHEME, /* 10 */ + CURLUE_NO_USER, /* 11 */ + CURLUE_NO_PASSWORD, /* 12 */ + CURLUE_NO_OPTIONS, /* 13 */ + CURLUE_NO_HOST, /* 14 */ + CURLUE_NO_PORT, /* 15 */ + CURLUE_NO_QUERY, /* 16 */ + CURLUE_NO_FRAGMENT, /* 17 */ + CURLUE_NO_ZONEID, /* 18 */ + CURLUE_BAD_FILE_URL, /* 19 */ + CURLUE_BAD_FRAGMENT, /* 20 */ + CURLUE_BAD_HOSTNAME, /* 21 */ + CURLUE_BAD_IPV6, /* 22 */ + CURLUE_BAD_LOGIN, /* 23 */ + CURLUE_BAD_PASSWORD, /* 24 */ + CURLUE_BAD_PATH, /* 25 */ + CURLUE_BAD_QUERY, /* 26 */ + CURLUE_BAD_SCHEME, /* 27 */ + CURLUE_BAD_SLASHES, /* 28 */ + CURLUE_BAD_USER, /* 29 */ + CURLUE_LAST +} CURLUcode; + +typedef enum { + CURLUPART_URL, + CURLUPART_SCHEME, + CURLUPART_USER, + CURLUPART_PASSWORD, + CURLUPART_OPTIONS, + CURLUPART_HOST, + CURLUPART_PORT, + CURLUPART_PATH, + CURLUPART_QUERY, + CURLUPART_FRAGMENT, + CURLUPART_ZONEID /* added in 7.65.0 */ +} CURLUPart; + +#define CURLU_DEFAULT_PORT (1<<0) /* return default port number */ +#define CURLU_NO_DEFAULT_PORT (1<<1) /* act as if no port number was set, + if the port number matches the + default for the scheme */ +#define CURLU_DEFAULT_SCHEME (1<<2) /* return default scheme if + missing */ +#define CURLU_NON_SUPPORT_SCHEME (1<<3) /* allow non-supported scheme */ +#define CURLU_PATH_AS_IS (1<<4) /* leave dot sequences */ +#define CURLU_DISALLOW_USER (1<<5) /* no user+password allowed */ +#define CURLU_URLDECODE (1<<6) /* URL decode on get */ +#define CURLU_URLENCODE (1<<7) /* URL encode on set */ +#define CURLU_APPENDQUERY (1<<8) /* append a form style part */ +#define CURLU_GUESS_SCHEME (1<<9) /* legacy curl-style guessing */ +#define CURLU_NO_AUTHORITY (1<<10) /* Allow empty authority when the + scheme is unknown. */ +#define CURLU_ALLOW_SPACE (1<<11) /* Allow spaces in the URL */ + +typedef struct Curl_URL CURLU; + +/* + * curl_url() creates a new CURLU handle and returns a pointer to it. + * Must be freed with curl_url_cleanup(). + */ +CURL_EXTERN CURLU *curl_url(void); + +/* + * curl_url_cleanup() frees the CURLU handle and related resources used for + * the URL parsing. It will not free strings previously returned with the URL + * API. + */ +CURL_EXTERN void curl_url_cleanup(CURLU *handle); + +/* + * curl_url_dup() duplicates a CURLU handle and returns a new copy. The new + * handle must also be freed with curl_url_cleanup(). + */ +CURL_EXTERN CURLU *curl_url_dup(CURLU *in); + +/* + * curl_url_get() extracts a specific part of the URL from a CURLU + * handle. Returns error code. The returned pointer MUST be freed with + * curl_free() afterwards. + */ +CURL_EXTERN CURLUcode curl_url_get(CURLU *handle, CURLUPart what, + char **part, unsigned int flags); + +/* + * curl_url_set() sets a specific part of the URL in a CURLU handle. Returns + * error code. The passed in string will be copied. Passing a NULL instead of + * a part string, clears that part. + */ +CURL_EXTERN CURLUcode curl_url_set(CURLU *handle, CURLUPart what, + const char *part, unsigned int flags); + +/* + * curl_url_strerror() turns a CURLUcode value into the equivalent human + * readable error string. This is useful for printing meaningful error + * messages. + */ +CURL_EXTERN const char *curl_url_strerror(CURLUcode); + +#ifdef __cplusplus +} /* end of extern "C" */ +#endif + +#endif /* CURLINC_URLAPI_H */ diff --git a/NorthstarDedicatedTest/include/libcurl/lib/libcurl_a.lib b/NorthstarDedicatedTest/include/libcurl/lib/libcurl_a.lib Binary files differnew file mode 100644 index 00000000..f0fa49f2 --- /dev/null +++ b/NorthstarDedicatedTest/include/libcurl/lib/libcurl_a.lib diff --git a/NorthstarDedicatedTest/keyvalues.cpp b/NorthstarDedicatedTest/keyvalues.cpp index 6de93822..b14ecf42 100644 --- a/NorthstarDedicatedTest/keyvalues.cpp +++ b/NorthstarDedicatedTest/keyvalues.cpp @@ -50,7 +50,7 @@ void ModManager::TryBuildKeyValues(const char* filename) // copy over patch kv files, and add #bases to new file, last mods' patches should be applied first // note: #include should be identical but it's actually just broken, thanks respawn - for (int i = m_loadedMods.size() - 1; i > -1; i--) + for (int64_t i = m_loadedMods.size() - 1; i > -1; i--) { if (!m_loadedMods[i].Enabled) continue; @@ -92,6 +92,7 @@ void ModManager::TryBuildKeyValues(const char* filename) char rootName[64]; memset(rootName, 0, sizeof(rootName)); + rootName[63] = '\0'; // iterate until we hit an ascii char that isn't in a # command or comment to get root obj name int i = 0; diff --git a/NorthstarDedicatedTest/languagehooks.cpp b/NorthstarDedicatedTest/languagehooks.cpp new file mode 100644 index 00000000..08bacaf9 --- /dev/null +++ b/NorthstarDedicatedTest/languagehooks.cpp @@ -0,0 +1,109 @@ +#include "pch.h" +#include "languagehooks.h" +#include "gameutils.h" +#include <filesystem> +#include <regex> + +namespace fs = std::filesystem; + +typedef char* (*GetGameLanguageType)(); +char* GetGameLanguage(); + +typedef LANGID(*Tier0_DetectDefaultLanguageType)(); + +GetGameLanguageType GetGameLanguageOriginal; + +bool CheckLangAudioExists(char* lang) +{ + std::string path{ "r2\\sound\\general_" }; + path += lang; + path += ".mstr"; + return fs::exists(path); +} + +std::vector<std::string> file_list(fs::path dir, std::regex ext_pattern) +{ + std::vector<std::string> result; + + using iterator = fs::directory_iterator; + + const iterator end; + for (iterator iter{ dir }; iter != end; ++iter) + { + const std::string filename = iter->path().filename().string(); + std::smatch matches; + if (fs::is_regular_file(*iter) && std::regex_match(filename, matches, ext_pattern)) + { + result.push_back(std::move(matches.str(1))); + } + } + + return result; +} + +std::string GetAnyInstalledAudioLanguage() +{ + for (const auto& lang : file_list("r2\\sound\\", std::regex(".*?general_([a-z]+)_patch_1\\.mstr"))) + if (lang != "general" || lang != "") + return lang; + return "NO LANGUAGE DETECTED"; +} + +char* GetGameLanguageHook() +{ + auto tier0Handle = GetModuleHandleA("tier0.dll"); + auto Tier0_DetectDefaultLanguageType = GetProcAddress(tier0Handle, "Tier0_DetectDefaultLanguage"); + char* ingameLang1 = (char*)tier0Handle + 0xA9B60; // one of the globals we need to override if overriding lang (size: 256) + bool& canOriginDictateLang = *(bool*)((char*)tier0Handle + 0xA9A90); + + const char* forcedLanguage; + if (CommandLine()->CheckParm("-language", &forcedLanguage)) + { + if (!CheckLangAudioExists((char*)forcedLanguage)) + { + spdlog::info("User tried to force the language (-language) to \"{}\", but audio for this language doesn't exist and the game is bound to error, falling back to next option...", forcedLanguage); + } + else + { + spdlog::info("User forcing the language (-language) to: {}", forcedLanguage); + strncpy(ingameLang1, forcedLanguage, 256); + return ingameLang1; + } + } + + canOriginDictateLang = true; // let it try + { + auto lang = GetGameLanguageOriginal(); + if (!CheckLangAudioExists(lang)) + { + spdlog::info("Origin detected language \"{}\", but we do not have audio for it installed, falling back to the next option", lang); + + } + else + { + spdlog::info("Origin detected language: {}", lang); + return lang; + } + } + + Tier0_DetectDefaultLanguageType(); // force the global in tier0 to be populated with language inferred from user's system rather than defaulting to Russian + canOriginDictateLang = false; // Origin has no say anymore, we will fallback to user's system setup language + auto lang = GetGameLanguageOriginal(); + spdlog::info("Detected system language: {}", lang); + if (!CheckLangAudioExists(lang)) + { + spdlog::warn("Caution, audio for this language does NOT exist. You might want to override your game language with -language command line option."); + auto lang = GetAnyInstalledAudioLanguage(); + spdlog::warn("Falling back to first installed audio language: {}", lang.c_str()); + strncpy(ingameLang1, lang.c_str(), 256); + return ingameLang1; + } + + return lang; +} + +void InitialiseTier0LanguageHooks(HMODULE baseAddress) +{ + HookEnabler hook; + ENABLER_CREATEHOOK(hook, (char*)baseAddress + 0xF560, &GetGameLanguageHook, reinterpret_cast<LPVOID*>(&GetGameLanguageOriginal)); +}
\ No newline at end of file diff --git a/NorthstarDedicatedTest/languagehooks.h b/NorthstarDedicatedTest/languagehooks.h new file mode 100644 index 00000000..55b591e0 --- /dev/null +++ b/NorthstarDedicatedTest/languagehooks.h @@ -0,0 +1,3 @@ +#pragma once + +void InitialiseTier0LanguageHooks(HMODULE baseAddress); diff --git a/NorthstarDedicatedTest/logging.cpp b/NorthstarDedicatedTest/logging.cpp index fb5a11fc..c5c5ea19 100644 --- a/NorthstarDedicatedTest/logging.cpp +++ b/NorthstarDedicatedTest/logging.cpp @@ -113,12 +113,27 @@ long __stdcall ExceptionFilter(EXCEPTION_POINTERS* exceptionInfo) GetModuleFileNameExA(GetCurrentProcess(), crashedModuleHandle, crashedModuleFullName, MAX_PATH); char* crashedModuleName = strrchr(crashedModuleFullName, '\\') + 1; - DWORD crashedModuleOffset = ((DWORD)exceptionAddress) - ((DWORD)crashedModuleInfo.lpBaseOfDll); + DWORD64 crashedModuleOffset = ((DWORD64)exceptionAddress) - ((DWORD64)crashedModuleInfo.lpBaseOfDll); CONTEXT* exceptionContext = exceptionInfo->ContextRecord; spdlog::error("Northstar has crashed! a minidump has been written and exception info is available below:"); spdlog::error(exceptionCause.str()); - spdlog::error("Address: {} + 0x{0:x}", crashedModuleName, crashedModuleOffset); + spdlog::error("At: {} + {}", crashedModuleName, (void*)crashedModuleOffset); + + PVOID framesToCapture[62]; + int frames = RtlCaptureStackBackTrace(0, 62, framesToCapture, NULL); + for (int i = 0; i < frames; i++) + { + HMODULE backtraceModuleHandle; + GetModuleHandleExA(GET_MODULE_HANDLE_EX_FLAG_FROM_ADDRESS, static_cast<LPCSTR>(framesToCapture[i]), &backtraceModuleHandle); + + char backtraceModuleFullName[MAX_PATH]; + GetModuleFileNameExA(GetCurrentProcess(), backtraceModuleHandle, backtraceModuleFullName, MAX_PATH); + char* backtraceModuleName = strrchr(backtraceModuleFullName, '\\') + 1; + + spdlog::error(" {} + {}", backtraceModuleName, (void*)framesToCapture[i]); + } + spdlog::error("RAX: 0x{0:x}", exceptionContext->Rax); spdlog::error("RBX: 0x{0:x}", exceptionContext->Rbx); spdlog::error("RCX: 0x{0:x}", exceptionContext->Rcx); @@ -171,6 +186,7 @@ void InitialiseLogging() AllocConsole(); freopen("CONOUT$", "w", stdout); + freopen("CONOUT$", "w", stderr); spdlog::default_logger()->set_pattern("[%H:%M:%S] [%l] %v"); spdlog::flush_on(spdlog::level::info); @@ -187,6 +203,8 @@ void InitialiseLogging() spdlog::default_logger()->sinks().push_back(std::make_shared<spdlog::sinks::basic_file_sink_mt>(stream.str(), false)); } +ConVar* Cvar_spewlog_enable; + enum SpewType_t { SPEW_MESSAGE = 0, @@ -202,6 +220,9 @@ EngineSpewFuncType EngineSpewFunc; void EngineSpewFuncHook(void* engineServer, SpewType_t type, const char* format, va_list args) { + if (!Cvar_spewlog_enable->m_nValue) + return; + const char* typeStr; switch (type) { @@ -242,7 +263,7 @@ void EngineSpewFuncHook(void* engineServer, SpewType_t type, const char* format, } } - char formatted[2048]; + char formatted[2048] = { 0 }; bool shouldFormat = true; // because titanfall 2 is quite possibly the worst thing to yet exist, it sometimes gives invalid specifiers which will crash @@ -304,11 +325,59 @@ void EngineSpewFuncHook(void* engineServer, SpewType_t type, const char* format, spdlog::warn("Failed to format {} \"{}\"", typeStr, format); } + auto endpos = strlen(formatted); + if (formatted[endpos - 1] == '\n') + formatted[endpos - 1] = '\0'; // cut off repeated newline + spdlog::info("[SERVER {}] {}", typeStr, formatted); } + +typedef void(*Status_ConMsg_Type)(const char* text, ...); +Status_ConMsg_Type Status_ConMsg_Original; + +void Status_ConMsg_Hook(const char* text, ...) +{ + char formatted[2048]; + va_list list; + + va_start(list, text); + vsprintf_s(formatted, text, list); + va_end(list); + + auto endpos = strlen(formatted); + if (formatted[endpos - 1] == '\n') + formatted[endpos - 1] = '\0'; // cut off repeated newline + + spdlog::info(formatted); +} + +typedef bool(*CClientState_ProcessPrint_Type)(__int64 thisptr, __int64 msg); +CClientState_ProcessPrint_Type CClientState_ProcessPrint_Original; + +bool CClientState_ProcessPrint_Hook(__int64 thisptr, __int64 msg) +{ + char* text = *(char**)(msg + 0x20); + + auto endpos = strlen(text); + if (text[endpos - 1] == '\n') + text[endpos - 1] = '\0'; // cut off repeated newline + + spdlog::info(text); + return true; +} + void InitialiseEngineSpewFuncHooks(HMODULE baseAddress) { HookEnabler hook; + ENABLER_CREATEHOOK(hook, (char*)baseAddress + 0x11CA80, EngineSpewFuncHook, reinterpret_cast<LPVOID*>(&EngineSpewFunc)); + + // Hook print function that status concmd uses to actually print data + ENABLER_CREATEHOOK(hook, (char*)baseAddress + 0x15ABD0, Status_ConMsg_Hook, reinterpret_cast<LPVOID*>(&Status_ConMsg_Original)); + + // Hook CClientState::ProcessPrint + ENABLER_CREATEHOOK(hook, (char*)baseAddress + 0x1A1530, CClientState_ProcessPrint_Hook, reinterpret_cast<LPVOID*>(&CClientState_ProcessPrint_Original)); + + Cvar_spewlog_enable = RegisterConVar("spewlog_enable", "1", FCVAR_NONE, "Enables/disables whether the engine spewfunc should be logged"); }
\ No newline at end of file diff --git a/NorthstarDedicatedTest/main.h b/NorthstarDedicatedTest/main.h index ef5d86dc..90e88912 100644 --- a/NorthstarDedicatedTest/main.h +++ b/NorthstarDedicatedTest/main.h @@ -1,3 +1,3 @@ #pragma once -extern "C" __declspec(dllexport) void InitialiseNorthstar();
\ No newline at end of file +extern "C" __declspec(dllexport) bool InitialiseNorthstar();
\ No newline at end of file diff --git a/NorthstarDedicatedTest/masterserver.cpp b/NorthstarDedicatedTest/masterserver.cpp index d49252bc..74bd9af5 100644 --- a/NorthstarDedicatedTest/masterserver.cpp +++ b/NorthstarDedicatedTest/masterserver.cpp @@ -3,7 +3,6 @@ #include "concommand.h" #include "gameutils.h" #include "hookutils.h" -#include "httplib.h" #include "serverauthentication.h" #include "gameutils.h" #include "rapidjson/document.h" @@ -13,6 +12,9 @@ #include "modmanager.h" #include "misccommands.h" +// NOTE for anyone reading this: we used to use httplib for requests here, but it had issues, so we're moving to curl now for masterserver requests +// so httplib is used exclusively for server stuff now + ConVar* Cvar_ns_masterserver_hostname; ConVar* Cvar_ns_report_server_to_masterserver; ConVar* Cvar_ns_report_sp_server_to_masterserver; @@ -21,6 +23,9 @@ ConVar* Cvar_ns_server_name; ConVar* Cvar_ns_server_desc; ConVar* Cvar_ns_server_password; +// Source ConVar +ConVar* Cvar_hostname; + MasterServerManager* g_MasterServerManager; typedef void(*CHostState__State_NewGameType)(CHostState* hostState); @@ -89,16 +94,16 @@ RemoteServerInfo::RemoteServerInfo(const char* newId, const char* newName, const maxPlayers = newMaxPlayers; } -void MasterServerManager::LazyCreateHttpClient() +void MasterServerManager::SetCommonHttpClientOptions(CURL* curl) { - if (m_httpClient) - return; - - m_httpClient = new httplib::Client(Cvar_ns_masterserver_hostname->m_pszString); - m_httpClient->set_connection_timeout(25); - m_httpClient->set_read_timeout(25); - m_httpClient->set_write_timeout(25); - m_httpClient->set_tcp_nodelay(true); + curl_easy_setopt(curl, CURLOPT_IPRESOLVE, CURL_IPRESOLVE_V4); + curl_easy_setopt(curl, CURLOPT_VERBOSE, 1L); + //curl_easy_setopt(curl, CURLOPT_STDERR, stdout); + if (CommandLine()->FindParm("-msinsecure")) // TODO: this check doesn't seem to work + { + curl_easy_setopt(curl, CURLOPT_SSL_VERIFYHOST, 0L); + curl_easy_setopt(curl, CURLOPT_SSL_VERIFYPEER, 0L); + } } void MasterServerManager::ClearServerList() @@ -111,51 +116,10 @@ void MasterServerManager::ClearServerList() m_requestingServerList = false; } -bool MasterServerManager::AuthenticateOriginWithMasterServerThread(std::string uidStr, std::string tokenStr) +size_t CurlWriteToStringBufferCallback(char* contents, size_t size, size_t nmemb, void* userp) { - spdlog::info("Trying to authenticate with northstar masterserver for user {}", uidStr); - - LazyCreateHttpClient(); - if (auto result = m_httpClient->Get(fmt::format("/client/origin_auth?id={}&token={}", uidStr, tokenStr).c_str())) - { - m_successfullyConnected = true; - - rapidjson::Document originAuthInfo; - originAuthInfo.Parse(result->body.c_str()); - - if (originAuthInfo.HasParseError()) - { - spdlog::error("Failed reading origin auth info response: encountered parse error \{}\"", rapidjson::GetParseError_En(originAuthInfo.GetParseError())); - goto REQUEST_END_CLEANUP; - } - - if (!originAuthInfo.IsObject() || !originAuthInfo.HasMember("success")) - { - spdlog::error("Failed reading origin auth info response: malformed response object {}", result->body); - goto REQUEST_END_CLEANUP; - } - - if (originAuthInfo["success"].IsTrue() && originAuthInfo.HasMember("token") && originAuthInfo["token"].IsString()) - { - strncpy(m_ownClientAuthToken, originAuthInfo["token"].GetString(), sizeof(m_ownClientAuthToken)); - m_ownClientAuthToken[sizeof(m_ownClientAuthToken) - 1] = 0; - spdlog::info("Northstar origin authentication completed successfully!"); - } - else - spdlog::error("Northstar origin authentication failed"); - } - else - { - spdlog::error("Failed performing northstar origin auth: error {}", HttplibErrorToString(result.error())); - m_successfullyConnected = false; - } - - // we goto this instead of returning so we always hit this -REQUEST_END_CLEANUP: - m_bOriginAuthWithMasterServerInProgress = false; - m_bOriginAuthWithMasterServerDone = true; - - return m_successfullyConnected; + ((std::string*)userp)->append((char*)contents, size * nmemb); + return size * nmemb; } void MasterServerManager::AuthenticateOriginWithMasterServer(char* uid, char* originToken) @@ -170,144 +134,61 @@ void MasterServerManager::AuthenticateOriginWithMasterServer(char* uid, char* or std::thread requestThread([this, uidStr, tokenStr]() { - for (int i = 0; i < 5; i++) - { - if (!AuthenticateOriginWithMasterServerThread(uidStr, tokenStr)) - spdlog::info("retrying..."); - else - return; - } - }); - - requestThread.detach(); -} - -bool MasterServerManager::RequestServerListThread() -{ - // make sure we never have 2 threads writing at once - // i sure do hope this is actually threadsafe - while (m_requestingServerList) - Sleep(100); - - m_requestingServerList = true; - m_scriptRequestingServerList = true; - - - spdlog::info("Requesting server list from {}", Cvar_ns_masterserver_hostname->m_pszString); - - LazyCreateHttpClient(); - if (auto result = m_httpClient->Get("/client/servers")) - { - m_successfullyConnected = true; - - rapidjson::Document serverInfoJson; - serverInfoJson.Parse(result->body.c_str()); - - if (serverInfoJson.HasParseError()) - { - spdlog::error("Failed reading masterserver response: encountered parse error \"{}\"", rapidjson::GetParseError_En(serverInfoJson.GetParseError())); - goto REQUEST_END_CLEANUP; - } - - if (serverInfoJson.IsObject() && serverInfoJson.HasMember("error")) - { - spdlog::error("Failed reading masterserver response: got fastify error response"); - spdlog::error(result->body); - goto REQUEST_END_CLEANUP; - } + spdlog::info("Trying to authenticate with northstar masterserver for user {}", uidStr); - if (!serverInfoJson.IsArray()) - { - spdlog::error("Failed reading masterserver response: root object is not an array"); - goto REQUEST_END_CLEANUP; - } + CURL* curl = curl_easy_init(); + SetCommonHttpClientOptions(curl); - rapidjson::GenericArray<false, rapidjson::Value> serverArray = serverInfoJson.GetArray(); + std::string readBuffer; + curl_easy_setopt(curl, CURLOPT_URL, fmt::format("{}/client/origin_auth?id={}&token={}", Cvar_ns_masterserver_hostname->m_pszString, uidStr, tokenStr).c_str()); + curl_easy_setopt(curl, CURLOPT_CUSTOMREQUEST, "GET"); + curl_easy_setopt(curl, CURLOPT_WRITEFUNCTION, CurlWriteToStringBufferCallback); + curl_easy_setopt(curl, CURLOPT_WRITEDATA, &readBuffer); - spdlog::info("Got {} servers", serverArray.Size()); + CURLcode result = curl_easy_perform(curl); - for (auto& serverObj : serverArray) - { - if (!serverObj.IsObject()) + if (result == CURLcode::CURLE_OK) { - spdlog::error("Failed reading masterserver response: member of server array is not an object"); - goto REQUEST_END_CLEANUP; - } + m_successfullyConnected = true; - // todo: verify json props are fine before adding to m_remoteServers - if (!serverObj.HasMember("id") || !serverObj["id"].IsString() - || !serverObj.HasMember("name") || !serverObj["name"].IsString() - || !serverObj.HasMember("description") || !serverObj["description"].IsString() - || !serverObj.HasMember("map") || !serverObj["map"].IsString() - || !serverObj.HasMember("playlist") || !serverObj["playlist"].IsString() - || !serverObj.HasMember("playerCount") || !serverObj["playerCount"].IsNumber() - || !serverObj.HasMember("maxPlayers") || !serverObj["maxPlayers"].IsNumber() - || !serverObj.HasMember("hasPassword") || !serverObj["hasPassword"].IsBool() - || !serverObj.HasMember("modInfo") || !serverObj["modInfo"].HasMember("Mods") || !serverObj["modInfo"]["Mods"].IsArray()) - { - spdlog::error("Failed reading masterserver response: malformed server object"); - continue; - }; + rapidjson_document originAuthInfo; + originAuthInfo.Parse(readBuffer.c_str()); - const char* id = serverObj["id"].GetString(); + if (originAuthInfo.HasParseError()) + { + spdlog::error("Failed reading origin auth info response: encountered parse error \"{}\"", rapidjson::GetParseError_En(originAuthInfo.GetParseError())); + goto REQUEST_END_CLEANUP; + } - RemoteServerInfo* newServer = nullptr; + if (!originAuthInfo.IsObject() || !originAuthInfo.HasMember("success")) + { + spdlog::error("Failed reading origin auth info response: malformed response object {}", readBuffer); + goto REQUEST_END_CLEANUP; + } - bool createNewServerInfo = true; - for (RemoteServerInfo& server : m_remoteServers) - { - // if server already exists, update info rather than adding to it - if (!strncmp((const char*)server.id, id, 32)) + if (originAuthInfo["success"].IsTrue() && originAuthInfo.HasMember("token") && originAuthInfo["token"].IsString()) { - server = RemoteServerInfo(id, serverObj["name"].GetString(), serverObj["description"].GetString(), serverObj["map"].GetString(), serverObj["playlist"].GetString(), serverObj["playerCount"].GetInt(), serverObj["maxPlayers"].GetInt(), serverObj["hasPassword"].IsTrue()); - newServer = &server; - createNewServerInfo = false; - break; + strncpy(m_ownClientAuthToken, originAuthInfo["token"].GetString(), sizeof(m_ownClientAuthToken)); + m_ownClientAuthToken[sizeof(m_ownClientAuthToken) - 1] = 0; + spdlog::info("Northstar origin authentication completed successfully!"); } + else + spdlog::error("Northstar origin authentication failed"); } - - // server didn't exist - if (createNewServerInfo) - newServer = &m_remoteServers.emplace_back(id, serverObj["name"].GetString(), serverObj["description"].GetString(), serverObj["map"].GetString(), serverObj["playlist"].GetString(), serverObj["playerCount"].GetInt(), serverObj["maxPlayers"].GetInt(), serverObj["hasPassword"].IsTrue()); - - newServer->requiredMods.clear(); - for (auto& requiredMod : serverObj["modInfo"]["Mods"].GetArray()) + else { - RemoteModInfo modInfo; - - if (!requiredMod.HasMember("RequiredOnClient") || !requiredMod["RequiredOnClient"].IsTrue()) - continue; - - if (!requiredMod.HasMember("Name") || !requiredMod["Name"].IsString()) - continue; - modInfo.Name = requiredMod["Name"].GetString(); - - if (!requiredMod.HasMember("Version") || !requiredMod["Version"].IsString()) - continue; - modInfo.Version = requiredMod["Version"].GetString(); - - newServer->requiredMods.push_back(modInfo); + spdlog::error("Failed performing northstar origin auth: error {}", curl_easy_strerror(result)); + m_successfullyConnected = false; } - spdlog::info("Server {} on map {} with playlist {} has {}/{} players", serverObj["name"].GetString(), serverObj["map"].GetString(), serverObj["playlist"].GetString(), serverObj["playerCount"].GetInt(), serverObj["maxPlayers"].GetInt()); - } - - std::sort(m_remoteServers.begin(), m_remoteServers.end(), [](RemoteServerInfo& a, RemoteServerInfo& b) { - return a.playerCount > b.playerCount; - }); - } - else - { - spdlog::error("Failed requesting servers: error {}", HttplibErrorToString(result.error())); - m_successfullyConnected = false; - } - - // we goto this instead of returning so we always hit this -REQUEST_END_CLEANUP: - m_requestingServerList = false; - m_scriptRequestingServerList = false; + // we goto this instead of returning so we always hit this + REQUEST_END_CLEANUP: + m_bOriginAuthWithMasterServerInProgress = false; + m_bOriginAuthWithMasterServerDone = true; + curl_easy_cleanup(curl); + }); - return m_successfullyConnected; + requestThread.detach(); } void MasterServerManager::RequestServerList() @@ -317,103 +198,142 @@ void MasterServerManager::RequestServerList() std::thread requestThread([this]() { - for (int i = 0; i < 3; i++) - { - if (!RequestServerListThread()) - spdlog::info("retrying..."); - else - return; - } - }); + // make sure we never have 2 threads writing at once + // i sure do hope this is actually threadsafe + while (m_requestingServerList) + Sleep(100); - requestThread.detach(); -} + m_requestingServerList = true; + m_scriptRequestingServerList = true; -bool MasterServerManager::RequestMainMenuPromosThread() -{ - while (m_bOriginAuthWithMasterServerInProgress || !m_bOriginAuthWithMasterServerDone) - Sleep(500); + spdlog::info("Requesting server list from {}", Cvar_ns_masterserver_hostname->m_pszString); - LazyCreateHttpClient(); - if (auto result = m_httpClient->Get("/client/mainmenupromos")) - { - m_successfullyConnected = true; + CURL* curl = curl_easy_init(); + SetCommonHttpClientOptions(curl); - rapidjson::Document mainMenuPromoJson; - mainMenuPromoJson.Parse(result->body.c_str()); + std::string readBuffer; + curl_easy_setopt(curl, CURLOPT_URL, fmt::format("{}/client/servers", Cvar_ns_masterserver_hostname->m_pszString).c_str()); + curl_easy_setopt(curl, CURLOPT_CUSTOMREQUEST, "GET"); + curl_easy_setopt(curl, CURLOPT_WRITEFUNCTION, CurlWriteToStringBufferCallback); + curl_easy_setopt(curl, CURLOPT_WRITEDATA, &readBuffer); - if (mainMenuPromoJson.HasParseError()) - { - spdlog::error("Failed reading masterserver main menu promos response: encountered parse error \"{}\"", rapidjson::GetParseError_En(mainMenuPromoJson.GetParseError())); - goto REQUEST_END_CLEANUP; - } + CURLcode result = curl_easy_perform(curl); - if (!mainMenuPromoJson.IsObject()) - { - spdlog::error("Failed reading masterserver main menu promos response: root object is not an object"); - goto REQUEST_END_CLEANUP; - } + if (result == CURLcode::CURLE_OK) + { + m_successfullyConnected = true; - if (mainMenuPromoJson.HasMember("error")) - { - spdlog::error("Failed reading masterserver response: got fastify error response"); - spdlog::error(result->body); - goto REQUEST_END_CLEANUP; - } + rapidjson_document serverInfoJson; + serverInfoJson.Parse(readBuffer.c_str()); - if (!mainMenuPromoJson.HasMember("newInfo") || !mainMenuPromoJson["newInfo"].IsObject() || - !mainMenuPromoJson["newInfo"].HasMember("Title1") || !mainMenuPromoJson["newInfo"]["Title1"].IsString() || - !mainMenuPromoJson["newInfo"].HasMember("Title2") || !mainMenuPromoJson["newInfo"]["Title2"].IsString() || - !mainMenuPromoJson["newInfo"].HasMember("Title3") || !mainMenuPromoJson["newInfo"]["Title3"].IsString() || - - !mainMenuPromoJson.HasMember("largeButton") || !mainMenuPromoJson["largeButton"].IsObject() || - !mainMenuPromoJson["largeButton"].HasMember("Title") || !mainMenuPromoJson["largeButton"]["Title"].IsString() || - !mainMenuPromoJson["largeButton"].HasMember("Text") || !mainMenuPromoJson["largeButton"]["Text"].IsString() || - !mainMenuPromoJson["largeButton"].HasMember("Url") || !mainMenuPromoJson["largeButton"]["Url"].IsString() || - !mainMenuPromoJson["largeButton"].HasMember("ImageIndex") || !mainMenuPromoJson["largeButton"]["ImageIndex"].IsNumber() || - - !mainMenuPromoJson.HasMember("smallButton1") || !mainMenuPromoJson["smallButton1"].IsObject() || - !mainMenuPromoJson["smallButton1"].HasMember("Title") || !mainMenuPromoJson["smallButton1"]["Title"].IsString() || - !mainMenuPromoJson["smallButton1"].HasMember("Url") || !mainMenuPromoJson["smallButton1"]["Url"].IsString() || - !mainMenuPromoJson["smallButton1"].HasMember("ImageIndex") || !mainMenuPromoJson["smallButton1"]["ImageIndex"].IsNumber() || - - !mainMenuPromoJson.HasMember("smallButton2") || !mainMenuPromoJson["smallButton2"].IsObject() || - !mainMenuPromoJson["smallButton2"].HasMember("Title") || !mainMenuPromoJson["smallButton2"]["Title"].IsString() || - !mainMenuPromoJson["smallButton2"].HasMember("Url") || !mainMenuPromoJson["smallButton2"]["Url"].IsString() || - !mainMenuPromoJson["smallButton2"].HasMember("ImageIndex") || !mainMenuPromoJson["smallButton2"]["ImageIndex"].IsNumber()) - { - spdlog::error("Failed reading masterserver main menu promos response: malformed json object"); - goto REQUEST_END_CLEANUP; - } + if (serverInfoJson.HasParseError()) + { + spdlog::error("Failed reading masterserver response: encountered parse error \"{}\"", rapidjson::GetParseError_En(serverInfoJson.GetParseError())); + goto REQUEST_END_CLEANUP; + } - m_MainMenuPromoData.newInfoTitle1 = mainMenuPromoJson["newInfo"]["Title1"].GetString(); - m_MainMenuPromoData.newInfoTitle2 = mainMenuPromoJson["newInfo"]["Title2"].GetString(); - m_MainMenuPromoData.newInfoTitle3 = mainMenuPromoJson["newInfo"]["Title3"].GetString(); + if (serverInfoJson.IsObject() && serverInfoJson.HasMember("error")) + { + spdlog::error("Failed reading masterserver response: got fastify error response"); + spdlog::error(readBuffer); + goto REQUEST_END_CLEANUP; + } - m_MainMenuPromoData.largeButtonTitle = mainMenuPromoJson["largeButton"]["Title"].GetString(); - m_MainMenuPromoData.largeButtonText = mainMenuPromoJson["largeButton"]["Text"].GetString(); - m_MainMenuPromoData.largeButtonUrl = mainMenuPromoJson["largeButton"]["Url"].GetString(); - m_MainMenuPromoData.largeButtonImageIndex = mainMenuPromoJson["largeButton"]["ImageIndex"].GetInt(); + if (!serverInfoJson.IsArray()) + { + spdlog::error("Failed reading masterserver response: root object is not an array"); + goto REQUEST_END_CLEANUP; + } - m_MainMenuPromoData.smallButton1Title = mainMenuPromoJson["smallButton1"]["Title"].GetString(); - m_MainMenuPromoData.smallButton1Url = mainMenuPromoJson["smallButton1"]["Url"].GetString(); - m_MainMenuPromoData.smallButton1ImageIndex = mainMenuPromoJson["smallButton1"]["ImageIndex"].GetInt(); + rapidjson::GenericArray<false, rapidjson_document::GenericValue> serverArray = serverInfoJson.GetArray(); - m_MainMenuPromoData.smallButton2Title = mainMenuPromoJson["smallButton2"]["Title"].GetString(); - m_MainMenuPromoData.smallButton2Url = mainMenuPromoJson["smallButton2"]["Url"].GetString(); - m_MainMenuPromoData.smallButton2ImageIndex = mainMenuPromoJson["smallButton2"]["ImageIndex"].GetInt(); + spdlog::info("Got {} servers", serverArray.Size()); - m_bHasMainMenuPromoData = true; - } - else - { - spdlog::error("Failed requesting main menu promos: error {}", HttplibErrorToString(result.error())); - m_successfullyConnected = false; - } + for (auto& serverObj : serverArray) + { + if (!serverObj.IsObject()) + { + spdlog::error("Failed reading masterserver response: member of server array is not an object"); + goto REQUEST_END_CLEANUP; + } + + // todo: verify json props are fine before adding to m_remoteServers + if (!serverObj.HasMember("id") || !serverObj["id"].IsString() + || !serverObj.HasMember("name") || !serverObj["name"].IsString() + || !serverObj.HasMember("description") || !serverObj["description"].IsString() + || !serverObj.HasMember("map") || !serverObj["map"].IsString() + || !serverObj.HasMember("playlist") || !serverObj["playlist"].IsString() + || !serverObj.HasMember("playerCount") || !serverObj["playerCount"].IsNumber() + || !serverObj.HasMember("maxPlayers") || !serverObj["maxPlayers"].IsNumber() + || !serverObj.HasMember("hasPassword") || !serverObj["hasPassword"].IsBool() + || !serverObj.HasMember("modInfo") || !serverObj["modInfo"].HasMember("Mods") || !serverObj["modInfo"]["Mods"].IsArray()) + { + spdlog::error("Failed reading masterserver response: malformed server object"); + continue; + }; + + const char* id = serverObj["id"].GetString(); + + RemoteServerInfo* newServer = nullptr; + + bool createNewServerInfo = true; + for (RemoteServerInfo& server : m_remoteServers) + { + // if server already exists, update info rather than adding to it + if (!strncmp((const char*)server.id, id, 32)) + { + server = RemoteServerInfo(id, serverObj["name"].GetString(), serverObj["description"].GetString(), serverObj["map"].GetString(), serverObj["playlist"].GetString(), serverObj["playerCount"].GetInt(), serverObj["maxPlayers"].GetInt(), serverObj["hasPassword"].IsTrue()); + newServer = &server; + createNewServerInfo = false; + break; + } + } + + // server didn't exist + if (createNewServerInfo) + newServer = &m_remoteServers.emplace_back(id, serverObj["name"].GetString(), serverObj["description"].GetString(), serverObj["map"].GetString(), serverObj["playlist"].GetString(), serverObj["playerCount"].GetInt(), serverObj["maxPlayers"].GetInt(), serverObj["hasPassword"].IsTrue()); + + newServer->requiredMods.clear(); + for (auto& requiredMod : serverObj["modInfo"]["Mods"].GetArray()) + { + RemoteModInfo modInfo; + + if (!requiredMod.HasMember("RequiredOnClient") || !requiredMod["RequiredOnClient"].IsTrue()) + continue; + + if (!requiredMod.HasMember("Name") || !requiredMod["Name"].IsString()) + continue; + modInfo.Name = requiredMod["Name"].GetString(); + + if (!requiredMod.HasMember("Version") || !requiredMod["Version"].IsString()) + continue; + modInfo.Version = requiredMod["Version"].GetString(); + + newServer->requiredMods.push_back(modInfo); + } + + spdlog::info("Server {} on map {} with playlist {} has {}/{} players", serverObj["name"].GetString(), serverObj["map"].GetString(), serverObj["playlist"].GetString(), serverObj["playerCount"].GetInt(), serverObj["maxPlayers"].GetInt()); + } + + std::sort(m_remoteServers.begin(), m_remoteServers.end(), [](RemoteServerInfo& a, RemoteServerInfo& b) + { + return a.playerCount > b.playerCount; + }); + } + else + { + spdlog::error("Failed requesting servers: error {}", curl_easy_strerror(result)); + m_successfullyConnected = false; + } + + // we goto this instead of returning so we always hit this + REQUEST_END_CLEANUP: + m_requestingServerList = false; + m_scriptRequestingServerList = false; + curl_easy_cleanup(curl); + }); -REQUEST_END_CLEANUP: - // nothing lol - return m_successfullyConnected; + requestThread.detach(); } void MasterServerManager::RequestMainMenuPromos() @@ -422,107 +342,102 @@ void MasterServerManager::RequestMainMenuPromos() std::thread requestThread([this]() { - for (int i = 0; i < 3; i++) - { - if (!RequestMainMenuPromosThread()) - spdlog::info("retrying..."); - else - return; - } - }); + while (m_bOriginAuthWithMasterServerInProgress || !m_bOriginAuthWithMasterServerDone) + Sleep(500); - requestThread.detach(); -} + CURL* curl = curl_easy_init(); + SetCommonHttpClientOptions(curl); -bool MasterServerManager::AuthenticateWithOwnServerThread(char* uid, char* playerToken) -{ - LazyCreateHttpClient(); - if (auto result = m_httpClient->Post(fmt::format("/client/auth_with_self?id={}&playerToken={}", uid, playerToken).c_str())) - { - m_successfullyConnected = true; + std::string readBuffer; + curl_easy_setopt(curl, CURLOPT_URL, fmt::format("{}/client/mainmenupromos", Cvar_ns_masterserver_hostname->m_pszString).c_str()); + curl_easy_setopt(curl, CURLOPT_CUSTOMREQUEST, "GET"); + curl_easy_setopt(curl, CURLOPT_WRITEFUNCTION, CurlWriteToStringBufferCallback); + curl_easy_setopt(curl, CURLOPT_WRITEDATA, &readBuffer); - rapidjson::Document authInfoJson; - authInfoJson.Parse(result->body.c_str()); + CURLcode result = curl_easy_perform(curl); - if (authInfoJson.HasParseError()) - { - spdlog::error("Failed reading masterserver authentication response: encountered parse error \"{}\"", rapidjson::GetParseError_En(authInfoJson.GetParseError())); - goto REQUEST_END_CLEANUP; - } + if (result == CURLcode::CURLE_OK) + { + m_successfullyConnected = true; - if (!authInfoJson.IsObject()) - { - spdlog::error("Failed reading masterserver authentication response: root object is not an object"); - goto REQUEST_END_CLEANUP; - } + rapidjson_document mainMenuPromoJson; + mainMenuPromoJson.Parse(readBuffer.c_str()); - if (authInfoJson.HasMember("error")) - { - spdlog::error("Failed reading masterserver response: got fastify error response"); - spdlog::error(result->body); - goto REQUEST_END_CLEANUP; - } - - if (!authInfoJson["success"].IsTrue()) - { - spdlog::error("Authentication with masterserver failed: \"success\" is not true"); - goto REQUEST_END_CLEANUP; - } + if (mainMenuPromoJson.HasParseError()) + { + spdlog::error("Failed reading masterserver main menu promos response: encountered parse error \"{}\"", rapidjson::GetParseError_En(mainMenuPromoJson.GetParseError())); + goto REQUEST_END_CLEANUP; + } - if (!authInfoJson.HasMember("success") || !authInfoJson.HasMember("id") || !authInfoJson["id"].IsString() || !authInfoJson.HasMember("authToken") || !authInfoJson["authToken"].IsString() || !authInfoJson.HasMember("persistentData") || !authInfoJson["persistentData"].IsArray()) - { - spdlog::error("Failed reading masterserver authentication response: malformed json object"); - goto REQUEST_END_CLEANUP; - } + if (!mainMenuPromoJson.IsObject()) + { + spdlog::error("Failed reading masterserver main menu promos response: root object is not an object"); + goto REQUEST_END_CLEANUP; + } - AuthData newAuthData; - strncpy(newAuthData.uid, authInfoJson["id"].GetString(), sizeof(newAuthData.uid)); - newAuthData.uid[sizeof(newAuthData.uid) - 1] = 0; + if (mainMenuPromoJson.HasMember("error")) + { + spdlog::error("Failed reading masterserver response: got fastify error response"); + spdlog::error(readBuffer); + goto REQUEST_END_CLEANUP; + } - newAuthData.pdataSize = authInfoJson["persistentData"].GetArray().Size(); - newAuthData.pdata = new char[newAuthData.pdataSize]; - //memcpy(newAuthData.pdata, authInfoJson["persistentData"].GetString(), newAuthData.pdataSize); + if (!mainMenuPromoJson.HasMember("newInfo") || !mainMenuPromoJson["newInfo"].IsObject() || + !mainMenuPromoJson["newInfo"].HasMember("Title1") || !mainMenuPromoJson["newInfo"]["Title1"].IsString() || + !mainMenuPromoJson["newInfo"].HasMember("Title2") || !mainMenuPromoJson["newInfo"]["Title2"].IsString() || + !mainMenuPromoJson["newInfo"].HasMember("Title3") || !mainMenuPromoJson["newInfo"]["Title3"].IsString() || + + !mainMenuPromoJson.HasMember("largeButton") || !mainMenuPromoJson["largeButton"].IsObject() || + !mainMenuPromoJson["largeButton"].HasMember("Title") || !mainMenuPromoJson["largeButton"]["Title"].IsString() || + !mainMenuPromoJson["largeButton"].HasMember("Text") || !mainMenuPromoJson["largeButton"]["Text"].IsString() || + !mainMenuPromoJson["largeButton"].HasMember("Url") || !mainMenuPromoJson["largeButton"]["Url"].IsString() || + !mainMenuPromoJson["largeButton"].HasMember("ImageIndex") || !mainMenuPromoJson["largeButton"]["ImageIndex"].IsNumber() || + + !mainMenuPromoJson.HasMember("smallButton1") || !mainMenuPromoJson["smallButton1"].IsObject() || + !mainMenuPromoJson["smallButton1"].HasMember("Title") || !mainMenuPromoJson["smallButton1"]["Title"].IsString() || + !mainMenuPromoJson["smallButton1"].HasMember("Url") || !mainMenuPromoJson["smallButton1"]["Url"].IsString() || + !mainMenuPromoJson["smallButton1"].HasMember("ImageIndex") || !mainMenuPromoJson["smallButton1"]["ImageIndex"].IsNumber() || + + !mainMenuPromoJson.HasMember("smallButton2") || !mainMenuPromoJson["smallButton2"].IsObject() || + !mainMenuPromoJson["smallButton2"].HasMember("Title") || !mainMenuPromoJson["smallButton2"]["Title"].IsString() || + !mainMenuPromoJson["smallButton2"].HasMember("Url") || !mainMenuPromoJson["smallButton2"]["Url"].IsString() || + !mainMenuPromoJson["smallButton2"].HasMember("ImageIndex") || !mainMenuPromoJson["smallButton2"]["ImageIndex"].IsNumber()) + { + spdlog::error("Failed reading masterserver main menu promos response: malformed json object"); + goto REQUEST_END_CLEANUP; + } - int i = 0; - // note: persistentData is a uint8array because i had problems getting strings to behave, it sucks but it's just how it be unfortunately - // potentially refactor later - for (auto& byte : authInfoJson["persistentData"].GetArray()) - { - if (!byte.IsUint() || byte.GetUint() > 255) - { - spdlog::error("Failed reading masterserver authentication response: malformed json object"); - goto REQUEST_END_CLEANUP; - } + m_MainMenuPromoData.newInfoTitle1 = mainMenuPromoJson["newInfo"]["Title1"].GetString(); + m_MainMenuPromoData.newInfoTitle2 = mainMenuPromoJson["newInfo"]["Title2"].GetString(); + m_MainMenuPromoData.newInfoTitle3 = mainMenuPromoJson["newInfo"]["Title3"].GetString(); - newAuthData.pdata[i++] = (char)byte.GetUint(); - } + m_MainMenuPromoData.largeButtonTitle = mainMenuPromoJson["largeButton"]["Title"].GetString(); + m_MainMenuPromoData.largeButtonText = mainMenuPromoJson["largeButton"]["Text"].GetString(); + m_MainMenuPromoData.largeButtonUrl = mainMenuPromoJson["largeButton"]["Url"].GetString(); + m_MainMenuPromoData.largeButtonImageIndex = mainMenuPromoJson["largeButton"]["ImageIndex"].GetInt(); - std::lock_guard<std::mutex> guard(g_ServerAuthenticationManager->m_authDataMutex); - g_ServerAuthenticationManager->m_authData.clear(); - g_ServerAuthenticationManager->m_authData.insert(std::make_pair(authInfoJson["authToken"].GetString(), newAuthData)); + m_MainMenuPromoData.smallButton1Title = mainMenuPromoJson["smallButton1"]["Title"].GetString(); + m_MainMenuPromoData.smallButton1Url = mainMenuPromoJson["smallButton1"]["Url"].GetString(); + m_MainMenuPromoData.smallButton1ImageIndex = mainMenuPromoJson["smallButton1"]["ImageIndex"].GetInt(); - m_successfullyAuthenticatedWithGameServer = true; - } - else - { - spdlog::error("Failed authenticating with own server: error {}", HttplibErrorToString(result.error())); - m_successfullyConnected = false; - m_successfullyAuthenticatedWithGameServer = false; - m_scriptAuthenticatingWithGameServer = false; - } + m_MainMenuPromoData.smallButton2Title = mainMenuPromoJson["smallButton2"]["Title"].GetString(); + m_MainMenuPromoData.smallButton2Url = mainMenuPromoJson["smallButton2"]["Url"].GetString(); + m_MainMenuPromoData.smallButton2ImageIndex = mainMenuPromoJson["smallButton2"]["ImageIndex"].GetInt(); -REQUEST_END_CLEANUP: - m_authenticatingWithGameServer = false; - m_scriptAuthenticatingWithGameServer = false; + m_bHasMainMenuPromoData = true; + } + else + { + spdlog::error("Failed requesting main menu promos: error {}", curl_easy_strerror(result)); + m_successfullyConnected = false; + } - if (m_bNewgameAfterSelfAuth) - { - // pretty sure this is threadsafe? - Cbuf_AddText(Cbuf_GetCurrentPlayer(), "ns_end_reauth_and_leave_to_lobby", cmd_source_t::kCommandSrcCode); - m_bNewgameAfterSelfAuth = false; - } + REQUEST_END_CLEANUP: + // nothing lol + curl_easy_cleanup(curl); + }); - return m_successfullyConnected; + requestThread.detach(); } void MasterServerManager::AuthenticateWithOwnServer(char* uid, char* playerToken) @@ -535,89 +450,111 @@ void MasterServerManager::AuthenticateWithOwnServer(char* uid, char* playerToken m_scriptAuthenticatingWithGameServer = true; m_successfullyAuthenticatedWithGameServer = false; - std::thread requestThread([this, uid, playerToken]() + std::string uidStr(uid); + std::string tokenStr(playerToken); + + std::thread requestThread([this, uidStr, tokenStr]() { - for (int i = 0; i < 5; i++) + CURL* curl = curl_easy_init(); + SetCommonHttpClientOptions(curl); + + std::string readBuffer; + curl_easy_setopt(curl, CURLOPT_URL, fmt::format("{}/client/auth_with_self?id={}&playerToken={}", Cvar_ns_masterserver_hostname->m_pszString, uidStr, tokenStr).c_str()); + curl_easy_setopt(curl, CURLOPT_CUSTOMREQUEST, "POST"); + curl_easy_setopt(curl, CURLOPT_WRITEFUNCTION, CurlWriteToStringBufferCallback); + curl_easy_setopt(curl, CURLOPT_WRITEDATA, &readBuffer); + + CURLcode result = curl_easy_perform(curl); + + if (result == CURLcode::CURLE_OK) { - if (!AuthenticateWithOwnServerThread(uid, playerToken)) - spdlog::info("retrying..."); - else - return; - } - }); + m_successfullyConnected = true; - requestThread.detach(); -} + rapidjson_document authInfoJson; + authInfoJson.Parse(readBuffer.c_str()); -bool MasterServerManager::AuthenticateWithServerThread(char* uid, char* playerToken, char* serverId, char* password) -{ - // esnure that any persistence saving is done, so we know masterserver has newest - while (m_savingPersistentData) - Sleep(100); + if (authInfoJson.HasParseError()) + { + spdlog::error("Failed reading masterserver authentication response: encountered parse error \"{}\"", rapidjson::GetParseError_En(authInfoJson.GetParseError())); + goto REQUEST_END_CLEANUP; + } - LazyCreateHttpClient(); - spdlog::info("Attempting authentication with server of id \"{}\"", serverId); + if (!authInfoJson.IsObject()) + { + spdlog::error("Failed reading masterserver authentication response: root object is not an object"); + goto REQUEST_END_CLEANUP; + } - if (auto result = m_httpClient->Post(fmt::format("/client/auth_with_server?id={}&playerToken={}&server={}&password={}", uid, playerToken, serverId, password).c_str())) - { - m_successfullyConnected = true; + if (authInfoJson.HasMember("error")) + { + spdlog::error("Failed reading masterserver response: got fastify error response"); + spdlog::error(readBuffer); + goto REQUEST_END_CLEANUP; + } - rapidjson::Document connectionInfoJson; - connectionInfoJson.Parse(result->body.c_str()); + if (!authInfoJson["success"].IsTrue()) + { + spdlog::error("Authentication with masterserver failed: \"success\" is not true"); + goto REQUEST_END_CLEANUP; + } - if (connectionInfoJson.HasParseError()) - { - spdlog::error("Failed reading masterserver authentication response: encountered parse error \"{}\"", rapidjson::GetParseError_En(connectionInfoJson.GetParseError())); - goto REQUEST_END_CLEANUP; - } + if (!authInfoJson.HasMember("success") || !authInfoJson.HasMember("id") || !authInfoJson["id"].IsString() || !authInfoJson.HasMember("authToken") || !authInfoJson["authToken"].IsString() || !authInfoJson.HasMember("persistentData") || !authInfoJson["persistentData"].IsArray()) + { + spdlog::error("Failed reading masterserver authentication response: malformed json object"); + goto REQUEST_END_CLEANUP; + } - if (!connectionInfoJson.IsObject()) - { - spdlog::error("Failed reading masterserver authentication response: root object is not an object"); - goto REQUEST_END_CLEANUP; - } + AuthData newAuthData; + strncpy(newAuthData.uid, authInfoJson["id"].GetString(), sizeof(newAuthData.uid)); + newAuthData.uid[sizeof(newAuthData.uid) - 1] = 0; - if (connectionInfoJson.HasMember("error")) - { - spdlog::error("Failed reading masterserver response: got fastify error response"); - spdlog::error(result->body); - goto REQUEST_END_CLEANUP; - } + newAuthData.pdataSize = authInfoJson["persistentData"].GetArray().Size(); + newAuthData.pdata = new char[newAuthData.pdataSize]; + //memcpy(newAuthData.pdata, authInfoJson["persistentData"].GetString(), newAuthData.pdataSize); - if (!connectionInfoJson["success"].IsTrue()) - { - spdlog::error("Authentication with masterserver failed: \"success\" is not true"); - goto REQUEST_END_CLEANUP; - } + int i = 0; + // note: persistentData is a uint8array because i had problems getting strings to behave, it sucks but it's just how it be unfortunately + // potentially refactor later + for (auto& byte : authInfoJson["persistentData"].GetArray()) + { + if (!byte.IsUint() || byte.GetUint() > 255) + { + spdlog::error("Failed reading masterserver authentication response: malformed json object"); + goto REQUEST_END_CLEANUP; + } - if (!connectionInfoJson.HasMember("success") || !connectionInfoJson.HasMember("ip") || !connectionInfoJson["ip"].IsString() || !connectionInfoJson.HasMember("port") || !connectionInfoJson["port"].IsNumber() || !connectionInfoJson.HasMember("authToken") || !connectionInfoJson["authToken"].IsString()) - { - spdlog::error("Failed reading masterserver authentication response: malformed json object"); - goto REQUEST_END_CLEANUP; - } + newAuthData.pdata[i++] = static_cast<char>(byte.GetUint()); + } + + std::lock_guard<std::mutex> guard(g_ServerAuthenticationManager->m_authDataMutex); + g_ServerAuthenticationManager->m_authData.clear(); + g_ServerAuthenticationManager->m_authData.insert(std::make_pair(authInfoJson["authToken"].GetString(), newAuthData)); - m_pendingConnectionInfo.ip.S_un.S_addr = inet_addr(connectionInfoJson["ip"].GetString()); - m_pendingConnectionInfo.port = connectionInfoJson["port"].GetInt(); + m_successfullyAuthenticatedWithGameServer = true; + } + else + { + spdlog::error("Failed authenticating with own server: error {}", curl_easy_strerror(result)); + m_successfullyConnected = false; + m_successfullyAuthenticatedWithGameServer = false; + m_scriptAuthenticatingWithGameServer = false; + } - strncpy(m_pendingConnectionInfo.authToken, connectionInfoJson["authToken"].GetString(), 31); - m_pendingConnectionInfo.authToken[31] = 0; + REQUEST_END_CLEANUP: + m_authenticatingWithGameServer = false; + m_scriptAuthenticatingWithGameServer = false; - m_hasPendingConnectionInfo = true; - m_successfullyAuthenticatedWithGameServer = true; - } - else - { - spdlog::error("Failed authenticating with server: error {}", HttplibErrorToString(result.error())); - m_successfullyConnected = false; - m_successfullyAuthenticatedWithGameServer = false; - m_scriptAuthenticatingWithGameServer = false; - } + if (m_bNewgameAfterSelfAuth) + { + // pretty sure this is threadsafe? + Cbuf_AddText(Cbuf_GetCurrentPlayer(), "ns_end_reauth_and_leave_to_lobby", cmd_source_t::kCommandSrcCode); + m_bNewgameAfterSelfAuth = false; + } -REQUEST_END_CLEANUP: - m_authenticatingWithGameServer = false; - m_scriptAuthenticatingWithGameServer = false; + curl_easy_cleanup(curl); + }); - return m_successfullyConnected; + requestThread.detach(); } void MasterServerManager::AuthenticateWithServer(char* uid, char* playerToken, char* serverId, char* password) @@ -630,129 +567,99 @@ void MasterServerManager::AuthenticateWithServer(char* uid, char* playerToken, c m_scriptAuthenticatingWithGameServer = true; m_successfullyAuthenticatedWithGameServer = false; - std::thread requestThread([this, uid, playerToken, serverId, password]() - { - for (int i = 0; i < 5; i++) - { - if (!AuthenticateWithServerThread(uid, playerToken, serverId, password)) - spdlog::info("retrying..."); - else - return; - } - }); - - requestThread.detach(); -} - -bool MasterServerManager::AddSelfToServerListThread(int port, int authPort, char* name, char* description, char* map, char* playlist, int maxPlayers, char* password) -{ - m_ownServerId[0] = 0; + std::string uidStr(uid); + std::string tokenStr(playerToken); + std::string serverIdStr(serverId); + std::string passwordStr(password); - std::string request; - if (*password) - request = fmt::format("/server/add_server?port={}&authPort={}&name={}&description={}&map={}&playlist={}&maxPlayers={}&password={}", port, authPort, name, description, map, playlist, maxPlayers, password); - else - request = fmt::format("/server/add_server?port={}&authPort={}&name={}&description={}&map={}&playlist={}&maxPlayers={}&password=", port, authPort, name, description, map, playlist, maxPlayers); + std::thread requestThread([this, uidStr, tokenStr, serverIdStr, passwordStr]() + { + // esnure that any persistence saving is done, so we know masterserver has newest + while (m_savingPersistentData) + Sleep(100); - // build modinfo obj - rapidjson::Document modinfoDoc; - modinfoDoc.SetObject(); - modinfoDoc.AddMember("Mods", rapidjson::Value(rapidjson::kArrayType), modinfoDoc.GetAllocator()); + spdlog::info("Attempting authentication with server of id \"{}\"", serverIdStr); - int currentModIndex = 0; - for (Mod& mod : g_ModManager->m_loadedMods) - { - if (!mod.Enabled || (!mod.RequiredOnClient && !mod.Pdiff.size())) - continue; + CURL* curl = curl_easy_init(); + SetCommonHttpClientOptions(curl); - modinfoDoc["Mods"].PushBack(rapidjson::Value(rapidjson::kObjectType), modinfoDoc.GetAllocator()); - modinfoDoc["Mods"][currentModIndex].AddMember("Name", rapidjson::StringRef(&mod.Name[0]), modinfoDoc.GetAllocator()); - modinfoDoc["Mods"][currentModIndex].AddMember("Version", rapidjson::StringRef(&mod.Version[0]), modinfoDoc.GetAllocator()); - modinfoDoc["Mods"][currentModIndex].AddMember("RequiredOnClient", mod.RequiredOnClient, modinfoDoc.GetAllocator()); - modinfoDoc["Mods"][currentModIndex].AddMember("Pdiff", rapidjson::StringRef(&mod.Pdiff[0]), modinfoDoc.GetAllocator()); + std::string readBuffer; + curl_easy_setopt(curl, CURLOPT_CUSTOMREQUEST, "POST"); + curl_easy_setopt(curl, CURLOPT_WRITEFUNCTION, CurlWriteToStringBufferCallback); + curl_easy_setopt(curl, CURLOPT_WRITEDATA, &readBuffer); - currentModIndex++; - } + { + char* escapedPassword = curl_easy_escape(curl, passwordStr.c_str(), passwordStr.length()); - rapidjson::StringBuffer buffer; - buffer.Clear(); - rapidjson::Writer<rapidjson::StringBuffer> writer(buffer); - modinfoDoc.Accept(writer); - const char* modInfoString = buffer.GetString(); + curl_easy_setopt(curl, CURLOPT_URL, fmt::format("{}/client/auth_with_server?id={}&playerToken={}&server={}&password={}", Cvar_ns_masterserver_hostname->m_pszString, uidStr, tokenStr, serverIdStr, escapedPassword).c_str()); + + curl_free(escapedPassword); + } - httplib::MultipartFormDataItems requestItems = { - {"modinfo", std::string(modInfoString, buffer.GetSize()), "modinfo.json", "application/octet-stream"} - }; + CURLcode result = curl_easy_perform(curl); - LazyCreateHttpClient(); - if (auto result = m_httpClient->Post(request.c_str(), requestItems)) - { - m_successfullyConnected = true; + if (result == CURLcode::CURLE_OK) + { + m_successfullyConnected = true; - rapidjson::Document serverAddedJson; - serverAddedJson.Parse(result->body.c_str()); + rapidjson_document connectionInfoJson; + connectionInfoJson.Parse(readBuffer.c_str()); - if (serverAddedJson.HasParseError()) - { - spdlog::error("Failed reading masterserver authentication response: encountered parse error \"{}\"", rapidjson::GetParseError_En(serverAddedJson.GetParseError())); - goto REQUEST_END_CLEANUP; - } + if (connectionInfoJson.HasParseError()) + { + spdlog::error("Failed reading masterserver authentication response: encountered parse error \"{}\"", rapidjson::GetParseError_En(connectionInfoJson.GetParseError())); + goto REQUEST_END_CLEANUP; + } - if (!serverAddedJson.IsObject()) - { - spdlog::error("Failed reading masterserver authentication response: root object is not an object"); - goto REQUEST_END_CLEANUP; - } + if (!connectionInfoJson.IsObject()) + { + spdlog::error("Failed reading masterserver authentication response: root object is not an object"); + goto REQUEST_END_CLEANUP; + } - if (serverAddedJson.HasMember("error")) - { - spdlog::error("Failed reading masterserver response: got fastify error response"); - spdlog::error(result->body); - goto REQUEST_END_CLEANUP; - } + if (connectionInfoJson.HasMember("error")) + { + spdlog::error("Failed reading masterserver response: got fastify error response"); + spdlog::error(readBuffer); + goto REQUEST_END_CLEANUP; + } - if (!serverAddedJson["success"].IsTrue()) - { - spdlog::error("Adding server to masterserver failed: \"success\" is not true"); - goto REQUEST_END_CLEANUP; - } + if (!connectionInfoJson["success"].IsTrue()) + { + spdlog::error("Authentication with masterserver failed: \"success\" is not true"); + goto REQUEST_END_CLEANUP; + } - if (!serverAddedJson.HasMember("id") || !serverAddedJson["id"].IsString()) - { - spdlog::error("Failed reading masterserver response: malformed json object"); - goto REQUEST_END_CLEANUP; - } + if (!connectionInfoJson.HasMember("success") || !connectionInfoJson.HasMember("ip") || !connectionInfoJson["ip"].IsString() || !connectionInfoJson.HasMember("port") || !connectionInfoJson["port"].IsNumber() || !connectionInfoJson.HasMember("authToken") || !connectionInfoJson["authToken"].IsString()) + { + spdlog::error("Failed reading masterserver authentication response: malformed json object"); + goto REQUEST_END_CLEANUP; + } - strncpy(m_ownServerId, serverAddedJson["id"].GetString(), sizeof(m_ownServerId)); - m_ownServerId[sizeof(m_ownServerId) - 1] = 0; + m_pendingConnectionInfo.ip.S_un.S_addr = inet_addr(connectionInfoJson["ip"].GetString()); + m_pendingConnectionInfo.port = (unsigned short)connectionInfoJson["port"].GetUint(); + strncpy(m_pendingConnectionInfo.authToken, connectionInfoJson["authToken"].GetString(), 31); + m_pendingConnectionInfo.authToken[31] = 0; - // heartbeat thread - // ideally this should actually be done in main thread, rather than on it's own thread, so it'd stop if server freezes - std::thread heartbeatThread([this] { - while (*m_ownServerId) + m_hasPendingConnectionInfo = true; + m_successfullyAuthenticatedWithGameServer = true; + } + else { - Sleep(10000); - for (int i = 0; i < 3; i++) - { - if (!(int)m_httpClient->Post(fmt::format("/server/heartbeat?id={}&playerCount={}", m_ownServerId, g_ServerAuthenticationManager->m_additionalPlayerData.size()).c_str()).error()) - break; - else - spdlog::warn("retrying heartbeat..."); - } + spdlog::error("Failed authenticating with server: error {}", curl_easy_strerror(result)); + m_successfullyConnected = false; + m_successfullyAuthenticatedWithGameServer = false; + m_scriptAuthenticatingWithGameServer = false; } - }); - heartbeatThread.detach(); - } - else - { - spdlog::error("Failed adding self to server list: error {}", HttplibErrorToString(result.error())); - m_successfullyConnected = false; - } + REQUEST_END_CLEANUP: + m_authenticatingWithGameServer = false; + m_scriptAuthenticatingWithGameServer = false; + curl_easy_cleanup(curl); + }); -REQUEST_END_CLEANUP: - return m_successfullyConnected; + requestThread.detach(); } void MasterServerManager::AddSelfToServerList(int port, int authPort, char* name, char* description, char* map, char* playlist, int maxPlayers, char* password) @@ -768,34 +675,164 @@ void MasterServerManager::AddSelfToServerList(int port, int authPort, char* name m_bRequireClientAuth = true; - std::thread requestThread([this, port, authPort, name, description, map, playlist, maxPlayers, password] + std::string strName(name); + std::string strDescription(description); + std::string strMap(map); + std::string strPlaylist(playlist); + std::string strPassword(password); + + std::thread requestThread([this, port, authPort, strName, strDescription, strMap, strPlaylist, maxPlayers, strPassword] { - for (int i = 0; i < 5; i++) + m_ownServerId[0] = 0; + m_ownServerAuthToken[0] = 0; + + // build modinfo obj + rapidjson_document modinfoDoc; + modinfoDoc.SetObject(); + modinfoDoc.AddMember("Mods", rapidjson_document::GenericValue(rapidjson::kArrayType), modinfoDoc.GetAllocator()); + + int currentModIndex = 0; + for (Mod& mod : g_ModManager->m_loadedMods) + { + if (!mod.Enabled || (!mod.RequiredOnClient && !mod.Pdiff.size())) + continue; + + modinfoDoc["Mods"].PushBack(rapidjson_document::GenericValue(rapidjson::kObjectType), modinfoDoc.GetAllocator()); + modinfoDoc["Mods"][currentModIndex].AddMember("Name", rapidjson::StringRef(&mod.Name[0]), modinfoDoc.GetAllocator()); + modinfoDoc["Mods"][currentModIndex].AddMember("Version", rapidjson::StringRef(&mod.Version[0]), modinfoDoc.GetAllocator()); + modinfoDoc["Mods"][currentModIndex].AddMember("RequiredOnClient", mod.RequiredOnClient, modinfoDoc.GetAllocator()); + modinfoDoc["Mods"][currentModIndex].AddMember("Pdiff", rapidjson::StringRef(&mod.Pdiff[0]), modinfoDoc.GetAllocator()); + + currentModIndex++; + } + + rapidjson::StringBuffer buffer; + buffer.Clear(); + rapidjson::Writer<rapidjson::StringBuffer> writer(buffer); + modinfoDoc.Accept(writer); + const char* modInfoString = buffer.GetString(); + + CURL* curl = curl_easy_init(); + SetCommonHttpClientOptions(curl); + + std::string readBuffer; + curl_easy_setopt(curl, CURLOPT_POST, 1L); + curl_easy_setopt(curl, CURLOPT_WRITEFUNCTION, CurlWriteToStringBufferCallback); + curl_easy_setopt(curl, CURLOPT_WRITEDATA, &readBuffer); + + curl_mime* mime = curl_mime_init(curl); + curl_mimepart* part = curl_mime_addpart(mime); + + curl_mime_data(part, modInfoString, buffer.GetSize()); + curl_mime_name(part, "modinfo"); + curl_mime_filename(part, "modinfo.json"); + curl_mime_type(part, "application/json"); + + curl_easy_setopt(curl, CURLOPT_MIMEPOST, mime); + + // format every paramter because computers hate me { - if (!AddSelfToServerListThread(port, authPort, name, description, map, playlist, maxPlayers, password)) - spdlog::info("retrying..."); - else - return; + char* nameEscaped = curl_easy_escape(curl, strName.c_str(), strName.length()); + char* descEscaped = curl_easy_escape(curl, strDescription.c_str(), strDescription.length()); + char* mapEscaped = curl_easy_escape(curl, strMap.c_str(), strMap.length()); + char* playlistEscaped = curl_easy_escape(curl, strPlaylist.c_str(), strPlaylist.length()); + char* passwordEscaped = curl_easy_escape(curl, strPassword.c_str(), strPassword.length()); + + curl_easy_setopt(curl, CURLOPT_URL, fmt::format("{}/server/add_server?port={}&authPort={}&name={}&description={}&map={}&playlist={}&maxPlayers={}&password={}", Cvar_ns_masterserver_hostname->m_pszString, port, authPort, nameEscaped, descEscaped, mapEscaped, playlistEscaped, maxPlayers, passwordEscaped).c_str()); + + curl_free(nameEscaped); + curl_free(descEscaped); + curl_free(mapEscaped); + curl_free(playlistEscaped); + curl_free(passwordEscaped); } - }); - requestThread.detach(); -} + CURLcode result = curl_easy_perform(curl); -bool MasterServerManager::UpdateServerMapAndPlaylistThread(char* map, char* playlist, int maxPlayers) -{ - // we dont process this at all atm, maybe do later, but atm not necessary - LazyCreateHttpClient(); - if (auto result = m_httpClient->Post(fmt::format("/server/update_values?id={}&map={}&playlist={}&maxPlayers={}", m_ownServerId, map, playlist, maxPlayers).c_str())) - { - m_successfullyConnected = true; - } - else - { - m_successfullyConnected = false; - } + if (result == CURLcode::CURLE_OK) + { + m_successfullyConnected = true; + + rapidjson_document serverAddedJson; + serverAddedJson.Parse(readBuffer.c_str()); + + if (serverAddedJson.HasParseError()) + { + spdlog::error("Failed reading masterserver authentication response: encountered parse error \"{}\"", rapidjson::GetParseError_En(serverAddedJson.GetParseError())); + goto REQUEST_END_CLEANUP; + } + + if (!serverAddedJson.IsObject()) + { + spdlog::error("Failed reading masterserver authentication response: root object is not an object"); + goto REQUEST_END_CLEANUP; + } + + if (serverAddedJson.HasMember("error")) + { + spdlog::error("Failed reading masterserver response: got fastify error response"); + spdlog::error(readBuffer); + goto REQUEST_END_CLEANUP; + } + + if (!serverAddedJson["success"].IsTrue()) + { + spdlog::error("Adding server to masterserver failed: \"success\" is not true"); + goto REQUEST_END_CLEANUP; + } + + if (!serverAddedJson.HasMember("id") || !serverAddedJson["id"].IsString() || !serverAddedJson.HasMember("serverAuthToken") || !serverAddedJson["serverAuthToken"].IsString()) + { + spdlog::error("Failed reading masterserver response: malformed json object"); + goto REQUEST_END_CLEANUP; + } + + strncpy(m_ownServerId, serverAddedJson["id"].GetString(), sizeof(m_ownServerId)); + m_ownServerId[sizeof(m_ownServerId) - 1] = 0; + + strncpy(m_ownServerAuthToken, serverAddedJson["serverAuthToken"].GetString(), sizeof(m_ownServerAuthToken)); + m_ownServerAuthToken[sizeof(m_ownServerAuthToken) - 1] = 0; + + // heartbeat thread + // ideally this should actually be done in main thread, rather than on it's own thread, so it'd stop if server freezes + std::thread heartbeatThread([this] { + Sleep(5000); + + do + { + CURL* curl = curl_easy_init(); + SetCommonHttpClientOptions(curl); + + std::string readBuffer; + curl_easy_setopt(curl, CURLOPT_CUSTOMREQUEST, "POST"); + curl_easy_setopt(curl, CURLOPT_URL, fmt::format("{}/server/heartbeat?id={}&playerCount={}", Cvar_ns_masterserver_hostname->m_pszString, m_ownServerId, g_ServerAuthenticationManager->m_additionalPlayerData.size()).c_str()); + curl_easy_setopt(curl, CURLOPT_WRITEFUNCTION, CurlWriteToStringBufferCallback); + curl_easy_setopt(curl, CURLOPT_WRITEDATA, &readBuffer); + curl_easy_setopt(curl, CURLOPT_VERBOSE, 0L); + + CURLcode result = curl_easy_perform(curl); + if (result != CURLcode::CURLE_OK) + spdlog::warn("Heartbeat failed with error {}", curl_easy_strerror(result)); + + curl_easy_cleanup(curl); + Sleep(10000); + } while (*m_ownServerId); + }); + + heartbeatThread.detach(); + } + else + { + spdlog::error("Failed adding self to server list: error {}", curl_easy_strerror(result)); + m_successfullyConnected = false; + } - return m_successfullyConnected; + REQUEST_END_CLEANUP: + curl_easy_cleanup(curl); + curl_mime_free(mime); + }); + + requestThread.detach(); } void MasterServerManager::UpdateServerMapAndPlaylist(char* map, char* playlist, int maxPlayers) @@ -804,15 +841,38 @@ void MasterServerManager::UpdateServerMapAndPlaylist(char* map, char* playlist, if (!*m_ownServerId) return; - std::thread requestThread([this, map, playlist, maxPlayers] + std::string strMap(map); + std::string strPlaylist(playlist); + + std::thread requestThread([this, strMap, strPlaylist, maxPlayers] { - for (int i = 0; i < 3; i++) + CURL* curl = curl_easy_init(); + SetCommonHttpClientOptions(curl); + + std::string readBuffer; + curl_easy_setopt(curl, CURLOPT_CUSTOMREQUEST, "POST"); + curl_easy_setopt(curl, CURLOPT_WRITEFUNCTION, CurlWriteToStringBufferCallback); + curl_easy_setopt(curl, CURLOPT_WRITEDATA, &readBuffer); + + // escape params { - if (!UpdateServerMapAndPlaylistThread(map, playlist, maxPlayers)) - spdlog::info("retrying..."); - else - return; + char* mapEscaped = curl_easy_escape(curl, strMap.c_str(), strMap.length()); + char* playlistEscaped = curl_easy_escape(curl, strPlaylist.c_str(), strPlaylist.length()); + + curl_easy_setopt(curl, CURLOPT_URL, fmt::format("{}/server/update_values?id={}&map={}&playlist={}&maxPlayers={}", Cvar_ns_masterserver_hostname->m_pszString, m_ownServerId, mapEscaped, playlistEscaped, maxPlayers).c_str()); + + curl_free(mapEscaped); + curl_free(playlistEscaped); } + + CURLcode result = curl_easy_perform(curl); + + if (result == CURLcode::CURLE_OK) + m_successfullyConnected = true; + else + m_successfullyConnected = false; + + curl_easy_cleanup(curl); }); requestThread.detach(); @@ -824,44 +884,30 @@ void MasterServerManager::UpdateServerPlayerCount(int playerCount) if (!*m_ownServerId) return; - std::thread requestThread([this, playerCount] { + std::thread requestThread([this, playerCount] + { + CURL* curl = curl_easy_init(); + SetCommonHttpClientOptions(curl); - // we dont process this at all atm, maybe do later, but atm not necessary - LazyCreateHttpClient(); - if (auto result = m_httpClient->Post(fmt::format("/server/update_values?id={}&playerCount={}", m_ownServerId, playerCount).c_str())) - { + std::string readBuffer; + curl_easy_setopt(curl, CURLOPT_CUSTOMREQUEST, "POST"); + curl_easy_setopt(curl, CURLOPT_WRITEFUNCTION, CurlWriteToStringBufferCallback); + curl_easy_setopt(curl, CURLOPT_WRITEDATA, &readBuffer); + curl_easy_setopt(curl, CURLOPT_URL, fmt::format("{}/server/update_values?id={}&playerCount={}", Cvar_ns_masterserver_hostname->m_pszString, m_ownServerId, playerCount).c_str()); + + CURLcode result = curl_easy_perform(curl); + + if (result == CURLcode::CURLE_OK) m_successfullyConnected = true; - } else - { m_successfullyConnected = false; - } + + curl_easy_cleanup(curl); }); requestThread.detach(); } -bool MasterServerManager::WritePlayerPersistentDataThread(std::string playerIdTemp, char* pdata, size_t pdataSize) -{ - httplib::MultipartFormDataItems requestItems = { - { "pdata", std::string(pdata, pdataSize), "file.pdata", "application/octet-stream"} - }; - - // we dont process this at all atm, maybe do later, but atm not necessary - LazyCreateHttpClient(); - if (auto result = m_httpClient->Post(fmt::format("/accounts/write_persistence?id={}&serverId={}", playerIdTemp, m_ownServerId).c_str(), requestItems)) - { - m_successfullyConnected = true; - } - else - { - m_successfullyConnected = false; - } - - m_savingPersistentData = false; - return m_successfullyConnected; -} - void MasterServerManager::WritePlayerPersistentData(char* playerId, char* pdata, size_t pdataSize) { // still call this if we don't have a server id, since lobbies that aren't port forwarded need to be able to call it @@ -872,35 +918,43 @@ void MasterServerManager::WritePlayerPersistentData(char* playerId, char* pdata, return; } - std::string playerIdTemp(playerId); - std::thread requestThread([this, playerIdTemp, pdata, pdataSize] + std::string strPlayerId(playerId); + std::string strPdata(pdata, pdataSize); + + std::thread requestThread([this, strPlayerId, strPdata, pdataSize] { - for (int i = 0; i < 5; i++) - { - if (!WritePlayerPersistentDataThread(playerIdTemp, pdata, pdataSize)) - spdlog::info("retrying..."); - else - return; - } - }); + CURL* curl = curl_easy_init(); + SetCommonHttpClientOptions(curl); - requestThread.detach(); -} + std::string readBuffer; + curl_easy_setopt(curl, CURLOPT_URL, fmt::format("{}/accounts/write_persistence?id={}&serverId={}", Cvar_ns_masterserver_hostname->m_pszString, strPlayerId, m_ownServerId).c_str()); + curl_easy_setopt(curl, CURLOPT_POST, 1L); + curl_easy_setopt(curl, CURLOPT_WRITEFUNCTION, CurlWriteToStringBufferCallback); + curl_easy_setopt(curl, CURLOPT_WRITEDATA, &readBuffer); -bool MasterServerManager::RemoveSelfFromServerListThread() -{ - // we dont process this at all atm, maybe do later, but atm not necessary - LazyCreateHttpClient(); - if (auto result = m_httpClient->Delete(fmt::format("/server/remove_server?id={}", m_ownServerId).c_str())) - { - m_successfullyConnected = true; - } - else - { - m_successfullyConnected = false; - } + curl_mime* mime = curl_mime_init(curl); + curl_mimepart* part = curl_mime_addpart(mime); - m_ownServerId[0] = 0; + curl_mime_data(part, strPdata.c_str(), pdataSize); + curl_mime_name(part, "pdata"); + curl_mime_filename(part, "file.pdata"); + curl_mime_type(part, "application/octet-stream"); + + curl_easy_setopt(curl, CURLOPT_MIMEPOST, mime); + + CURLcode result = curl_easy_perform(curl); + + if (result == CURLcode::CURLE_OK) + m_successfullyConnected = true; + else + m_successfullyConnected = false; + + curl_easy_cleanup(curl); + + m_savingPersistentData = false; + }); + + requestThread.detach(); } void MasterServerManager::RemoveSelfFromServerList() @@ -910,13 +964,23 @@ void MasterServerManager::RemoveSelfFromServerList() return; std::thread requestThread([this] { - for (int i = 0; i < 5; i++) - { - if (!RemoveSelfFromServerListThread()) - spdlog::info("retrying..."); - else - return; - } + CURL* curl = curl_easy_init(); + SetCommonHttpClientOptions(curl); + + std::string readBuffer; + curl_easy_setopt(curl, CURLOPT_CUSTOMREQUEST, "DELETE"); + curl_easy_setopt(curl, CURLOPT_WRITEFUNCTION, CurlWriteToStringBufferCallback); + curl_easy_setopt(curl, CURLOPT_WRITEDATA, &readBuffer); + curl_easy_setopt(curl, CURLOPT_URL, fmt::format("{}/server/remove_server?id={}", Cvar_ns_masterserver_hostname->m_pszString, m_ownServerId).c_str()); + + CURLcode result = curl_easy_perform(curl); + + if (result == CURLcode::CURLE_OK) + m_successfullyConnected = true; + else + m_successfullyConnected = false; + + curl_easy_cleanup(curl); }); requestThread.detach(); @@ -943,6 +1007,10 @@ void CHostState__State_NewGameHook(CHostState* hostState) if (maxPlayersVar) // GetCurrentPlaylistVar can return null so protect against this maxPlayers = std::stoi(maxPlayersVar); + // Copy new server name cvar to source + Cvar_hostname->m_pszString = Cvar_ns_server_name->m_pszString; + Cvar_hostname->m_StringLength = Cvar_ns_server_name->m_StringLength; + g_MasterServerManager->AddSelfToServerList(Cvar_hostport->m_nValue, Cvar_ns_player_auth_port->m_nValue, Cvar_ns_server_name->m_pszString, Cvar_ns_server_desc->m_pszString, hostState->m_levelName, (char*)GetCurrentPlaylistName(), maxPlayers, Cvar_ns_server_password->m_pszString); g_ServerAuthenticationManager->StartPlayerAuthServer(); g_ServerAuthenticationManager->m_bNeedLocalAuthForNewgame = false; @@ -978,6 +1046,11 @@ void CHostState__State_GameShutdownHook(CHostState* hostState) CHostState__State_GameShutdown(hostState); } +MasterServerManager::MasterServerManager() : m_pendingConnectionInfo{}, m_ownServerId{ "" }, m_ownClientAuthToken{ "" } +{ + +} + void InitialiseSharedMasterServer(HMODULE baseAddress) { Cvar_ns_masterserver_hostname = RegisterConVar("ns_masterserver_hostname", "127.0.0.1", FCVAR_NONE, ""); @@ -989,6 +1062,9 @@ void InitialiseSharedMasterServer(HMODULE baseAddress) Cvar_ns_server_password = RegisterConVar("ns_server_password", "", FCVAR_GAMEDLL, ""); Cvar_ns_report_server_to_masterserver = RegisterConVar("ns_report_server_to_masterserver", "1", FCVAR_GAMEDLL, ""); Cvar_ns_report_sp_server_to_masterserver = RegisterConVar("ns_report_sp_server_to_masterserver", "0", FCVAR_GAMEDLL, ""); + + Cvar_hostname = *(ConVar**)((char*)baseAddress + 0x1315bae8); + g_MasterServerManager = new MasterServerManager; RegisterConCommand("ns_fetchservers", ConCommand_ns_fetchservers, "", FCVAR_CLIENTDLL); @@ -998,4 +1074,4 @@ void InitialiseSharedMasterServer(HMODULE baseAddress) ENABLER_CREATEHOOK(hook, (char*)baseAddress + 0x16E5D0, CHostState__State_ChangeLevelMPHook, reinterpret_cast<LPVOID*>(&CHostState__State_ChangeLevelMP)); ENABLER_CREATEHOOK(hook, (char*)baseAddress + 0x16E520, CHostState__State_ChangeLevelSPHook, reinterpret_cast<LPVOID*>(&CHostState__State_ChangeLevelSP)); ENABLER_CREATEHOOK(hook, (char*)baseAddress + 0x16E640, CHostState__State_GameShutdownHook, reinterpret_cast<LPVOID*>(&CHostState__State_GameShutdown)); -}
\ No newline at end of file +} diff --git a/NorthstarDedicatedTest/masterserver.h b/NorthstarDedicatedTest/masterserver.h index 85237f23..d3c83052 100644 --- a/NorthstarDedicatedTest/masterserver.h +++ b/NorthstarDedicatedTest/masterserver.h @@ -1,6 +1,5 @@ #pragma once #include "convar.h" -#include "httplib.h" #include <WinSock2.h> struct RemoteModInfo @@ -38,7 +37,7 @@ public: char authToken[32]; in_addr ip; - int port; + unsigned short port; }; struct MainMenuPromoData @@ -67,10 +66,10 @@ class MasterServerManager private: bool m_requestingServerList = false; bool m_authenticatingWithGameServer = false; - httplib::Client* m_httpClient = nullptr; public: char m_ownServerId[33]; + char m_ownServerAuthToken[33]; char m_ownClientAuthToken[33]; bool m_bOriginAuthWithMasterServerDone = false; @@ -95,18 +94,10 @@ public: MainMenuPromoData m_MainMenuPromoData; private: - void LazyCreateHttpClient(); - bool RequestServerListThread(); - bool RequestMainMenuPromosThread(); - bool AuthenticateOriginWithMasterServerThread(std::string uidStr, std::string tokenStr); - bool AuthenticateWithOwnServerThread(char* uid, char* playerToken); - bool AuthenticateWithServerThread(char* uid, char* playerToken, char* serverId, char* password); - bool AddSelfToServerListThread(int port, int authPort, char* name, char* description, char* map, char* playlist, int maxPlayers, char* password); - bool UpdateServerMapAndPlaylistThread(char* map, char* playlist, int playerCount); - bool WritePlayerPersistentDataThread(std::string playerId, char* pdata, size_t pdataSize); - bool RemoveSelfFromServerListThread(); + void SetCommonHttpClientOptions(CURL* curl); public: + MasterServerManager(); void ClearServerList(); void RequestServerList(); void RequestMainMenuPromos(); diff --git a/NorthstarDedicatedTest/maxplayers.cpp b/NorthstarDedicatedTest/maxplayers.cpp new file mode 100644 index 00000000..9d08e83f --- /dev/null +++ b/NorthstarDedicatedTest/maxplayers.cpp @@ -0,0 +1,675 @@ +#include "pch.h" +#include "maxplayers.h" +#include "gameutils.h" + +// never set this to anything below 32 +#define NEW_MAX_PLAYERS 64 +// dg note: the theoretical limit is actually 100, 76 works without entity issues, and 64 works without clientside prediction issues. + +#define PAD_NUMBER(number, boundary) \ + ( ((number) + ((boundary)-1)) / (boundary) ) * (boundary) + +// this is horrible +constexpr int PlayerResource_Name_Start = 0; // Start of modded allocated space. +constexpr int PlayerResource_Name_Size = ((NEW_MAX_PLAYERS + 1) * 8); // const char* m_szName[MAX_PLAYERS + 1]; + +constexpr int PlayerResource_Ping_Start = PlayerResource_Name_Start + PlayerResource_Name_Size; +constexpr int PlayerResource_Ping_Size = ((NEW_MAX_PLAYERS + 1) * 4); // int m_iPing[MAX_PLAYERS + 1]; + +constexpr int PlayerResource_Team_Start = PlayerResource_Ping_Start + PlayerResource_Ping_Size; +constexpr int PlayerResource_Team_Size = ((NEW_MAX_PLAYERS + 1) * 4); // int m_iTeam[MAX_PLAYERS + 1]; + +constexpr int PlayerResource_PRHealth_Start = PlayerResource_Team_Start + PlayerResource_Team_Size; +constexpr int PlayerResource_PRHealth_Size = ((NEW_MAX_PLAYERS + 1) * 4); // int m_iPRHealth[MAX_PLAYERS + 1]; + +constexpr int PlayerResource_Connected_Start = PlayerResource_PRHealth_Start + PlayerResource_PRHealth_Size; +constexpr int PlayerResource_Connected_Size = ((NEW_MAX_PLAYERS + 1) * 4); // int (used as a bool) m_bConnected[MAX_PLAYERS + 1]; + +constexpr int PlayerResource_Alive_Start = PlayerResource_Connected_Start + PlayerResource_Connected_Size; +constexpr int PlayerResource_Alive_Size = ((NEW_MAX_PLAYERS + 1) * 4); // int (used as a bool) m_bAlive[MAX_PLAYERS + 1]; + +constexpr int PlayerResource_BoolStats_Start = PlayerResource_Alive_Start + PlayerResource_Alive_Size; +constexpr int PlayerResource_BoolStats_Size = ((NEW_MAX_PLAYERS + 1) * 4); // int (used as a bool idk) m_boolStats[MAX_PLAYERS + 1]; + +constexpr int PlayerResource_KillStats_Start = PlayerResource_BoolStats_Start + PlayerResource_BoolStats_Size; +constexpr int PlayerResource_KillStats_Length = PAD_NUMBER((NEW_MAX_PLAYERS + 1) * 6, 4); +constexpr int PlayerResource_KillStats_Size = (PlayerResource_KillStats_Length * 6); // int m_killStats[MAX_PLAYERS + 1][6]; + +constexpr int PlayerResource_ScoreStats_Start = PlayerResource_KillStats_Start + PlayerResource_KillStats_Size; +constexpr int PlayerResource_ScoreStats_Length = PAD_NUMBER((NEW_MAX_PLAYERS + 1) * 5, 4); +constexpr int PlayerResource_ScoreStats_Size = (PlayerResource_ScoreStats_Length * 4); // int m_scoreStats[MAX_PLAYERS + 1][5]; + +// must be the usage of the last field to account for any possible paddings +constexpr int PlayerResource_TotalSize = PlayerResource_ScoreStats_Start + PlayerResource_ScoreStats_Size; + +constexpr int Team_PlayerArray_AddedLength = NEW_MAX_PLAYERS - 32; +constexpr int Team_PlayerArray_AddedSize = PAD_NUMBER(Team_PlayerArray_AddedLength * 8, 4); +constexpr int Team_AddedSize = Team_PlayerArray_AddedSize; + +template<class T> +void ChangeOffset(void* addr, unsigned int offset) +{ + TempReadWrite rw(addr); + *((T*)addr) = offset; +} + +/* +typedef bool(*MatchRecvPropsToSendProps_R_Type)(__int64 lookup, __int64 tableNameBroken, __int64 sendTable, __int64 recvTable); +MatchRecvPropsToSendProps_R_Type MatchRecvPropsToSendProps_R_Original; + +bool MatchRecvPropsToSendProps_R_Hook(__int64 lookup, __int64 tableNameBroken, __int64 sendTable, __int64 recvTable) +{ + const char* tableName = *(const char**)(sendTable + 0x118); + + spdlog::info("MatchRecvPropsToSendProps_R table name {}", tableName); + + bool orig = MatchRecvPropsToSendProps_R_Original(lookup, tableNameBroken, sendTable, recvTable); + return orig; +} + +typedef bool(*DataTable_SetupReceiveTableFromSendTable_Type)(__int64 sendTable, bool needsDecoder); +DataTable_SetupReceiveTableFromSendTable_Type DataTable_SetupReceiveTableFromSendTable_Original; + +bool DataTable_SetupReceiveTableFromSendTable_Hook(__int64 sendTable, bool needsDecoder) +{ + const char* tableName = *(const char**)(sendTable + 0x118); + + spdlog::info("DataTable_SetupReceiveTableFromSendTable table name {}", tableName); + if (!strcmp(tableName, "m_bConnected")) { + char f[64]; + sprintf_s(f, "%p", sendTable); + MessageBoxA(0, f, "DataTable_SetupReceiveTableFromSendTable", 0); + } + + return DataTable_SetupReceiveTableFromSendTable_Original(sendTable, needsDecoder); +} +*/ + +typedef void* (*StringTables_CreateStringTable_Type)(__int64 thisptr, const char* name, int maxentries, int userdatafixedsize, int userdatanetworkbits, int flags); +StringTables_CreateStringTable_Type StringTables_CreateStringTable_Original; + +void* StringTables_CreateStringTable_Hook(__int64 thisptr, const char* name, int maxentries, int userdatafixedsize, int userdatanetworkbits, int flags) +{ + // Change the amount of entries to account for a bigger player amount + if (!strcmp(name, "userinfo")) + { + int maxPlayersPowerOf2 = 1; + while (maxPlayersPowerOf2 < NEW_MAX_PLAYERS) + maxPlayersPowerOf2 <<= 1; + + maxentries = maxPlayersPowerOf2; + } + + return StringTables_CreateStringTable_Original(thisptr, name, maxentries, userdatafixedsize, userdatanetworkbits, flags); +} + +bool MaxPlayersIncreaseEnabled() +{ + return CommandLine() && CommandLine()->CheckParm("-experimentalmaxplayersincrease"); +} + +void InitialiseMaxPlayersOverride_Engine(HMODULE baseAddress) +{ + if (!MaxPlayersIncreaseEnabled()) + return; + + // patch GetPlayerLimits to ignore the boundary limit + ChangeOffset<unsigned char>((char*)baseAddress + 0x116458, 0xEB); // jle => jmp + + // patch ED_Alloc to change nFirstIndex + ChangeOffset<int>((char*)baseAddress + 0x18F46C + 1, NEW_MAX_PLAYERS + 8 + 1); // original: 41 (sv.GetMaxClients() + 1) + + // patch CGameServer::SpawnServer to change GetMaxClients inline + ChangeOffset<int>((char*)baseAddress + 0x119543 + 2, NEW_MAX_PLAYERS + 8 + 1); // original: 41 (sv.GetMaxClients() + 1) + + // patch CGameServer::SpawnServer to change for loop + ChangeOffset<unsigned char>((char*)baseAddress + 0x11957F + 2, NEW_MAX_PLAYERS); // original: 32 + + // patch CGameServer::SpawnServer to change for loop (there are two) + ChangeOffset<unsigned char>((char*)baseAddress + 0x119586 + 2, NEW_MAX_PLAYERS + 1); // original: 33 (32 + 1) + + // patch max players somewhere in CClientState + ChangeOffset<unsigned char>((char*)baseAddress + 0x1A162C + 2, NEW_MAX_PLAYERS - 1); // original: 31 (32 - 1) + + // patch max players in userinfo stringtable creation + /*{ + int maxPlayersPowerOf2 = 1; + while (maxPlayersPowerOf2 < NEW_MAX_PLAYERS) + maxPlayersPowerOf2 <<= 1; + ChangeOffset<unsigned char>((char*)baseAddress + 0x114B79 + 3, maxPlayersPowerOf2); // original: 32 + }*/ + // this is not supposed to work at all but it does on 64 players (how) + // proper fix below + + // patch max players in userinfo stringtable creation loop + ChangeOffset<unsigned char>((char*)baseAddress + 0x114C48 + 2, NEW_MAX_PLAYERS); // original: 32 + + // do not load prebaked SendTable message list + ChangeOffset<unsigned char>((char*)baseAddress + 0x75859, 0xEB); // jnz -> jmp + + HookEnabler hook; + + // ENABLER_CREATEHOOK(hook, (char*)baseAddress + 0x209000, &MatchRecvPropsToSendProps_R_Hook, reinterpret_cast<LPVOID*>(&MatchRecvPropsToSendProps_R_Original)); + // ENABLER_CREATEHOOK(hook, (char*)baseAddress + 0x1FACD0, &DataTable_SetupReceiveTableFromSendTable_Hook, reinterpret_cast<LPVOID*>(&DataTable_SetupReceiveTableFromSendTable_Original)); + + ENABLER_CREATEHOOK(hook, (char*)baseAddress + 0x22E220, &StringTables_CreateStringTable_Hook, reinterpret_cast<LPVOID*>(&StringTables_CreateStringTable_Original)); +} + +typedef void(*RunUserCmds_Type)(bool a1, float a2); +RunUserCmds_Type RunUserCmds_Original; + +HMODULE serverBase = 0; +auto RandomIntZeroMax = (__int64(__fastcall*)())0; + +// lazy rebuild +void RunUserCmds_Hook(bool a1, float a2) +{ + unsigned char v3; // bl + int v5; // er14 + int i; // edi + __int64 v7; // rax + DWORD* v8; // rbx + int v9; // edi + __int64* v10; // rsi + __int64 v11; // rax + int v12; // er12 + __int64 v13; // rdi + int v14; // ebx + int v15; // eax + __int64 v16; // r8 + int v17; // edx + char v18; // r15 + char v19; // bp + int v20; // esi + __int64* v21; // rdi + __int64 v22; // rcx + bool v23; // al + __int64 v24; // rax + __int64 v25[NEW_MAX_PLAYERS]; // [rsp+20h] [rbp-138h] BYREF + + uintptr_t base = (__int64)serverBase; + auto g_pGlobals = *(__int64*)(base + 0xBFBE08); + __int64 globals = g_pGlobals; + + auto g_pEngineServer = *(__int64*)(base + 0xBFBD98); + + auto qword_1814D9648 = *(__int64*)(base + 0x14D9648); + auto qword_1814DA408 = *(__int64*)(base + 0x14DA408); + auto qword_1812107E8 = *(__int64*)(base + 0x12107E8); + auto qword_1812105A8 = *(__int64*)(base + 0x12105A8); + + auto UTIL_PlayerByIndex = (__int64(__fastcall*)(int index))(base + 0x26AA10); + auto sub_180485590 = (void(__fastcall*)(__int64))(base + 0x485590); + auto sub_18058CD80 = (void(__fastcall*)(__int64))(base + 0x58CD80); + auto sub_1805A6D90 = (void(__fastcall*)(__int64))(base + 0x5A6D90); + auto sub_1805A6E50 = (bool(__fastcall*)(__int64, int, char))(base + 0x5A6E50); + auto sub_1805A6C20 = (void(__fastcall*)(__int64))(base + 0x5A6C20); + + v3 = *(unsigned char*)(g_pGlobals + 73); + if (*(DWORD*)(qword_1814D9648 + 92) + && ((*(unsigned __int8(__fastcall**)(__int64))(*(__int64*)g_pEngineServer + 32i64))(g_pEngineServer) + || !*(DWORD*)(qword_1814DA408 + 92)) + && v3) + { + globals = g_pGlobals; + v5 = 1; + for (i = 1; i <= *(DWORD*)(g_pGlobals + 52); ++i) + { + v7 = UTIL_PlayerByIndex(i); + v8 = (DWORD*)v7; + if (v7) + { + *(__int64*)(base + 0x1210420) = v7; + *(float*)(g_pGlobals + 16) = a2; + if (!a1) + sub_18058CD80(v7); + sub_1805A6D90((__int64)v8); + } + globals = g_pGlobals; + } + memset(v25, 0, sizeof(v25)); + v9 = 0; + if (*(int*)(globals + 52) > 0) + { + v10 = v25; + do + { + v11 = UTIL_PlayerByIndex(++v9); + globals = g_pGlobals; + *v10++ = v11; + } while (v9 < *(DWORD*)(globals + 52)); + } + v12 = *(DWORD*)(qword_1812107E8 + 92); + if (*(DWORD*)(qword_1812105A8 + 92)) + { + v13 = *(DWORD*)(globals + 52) - 1; + if (v13 >= 1) + { + v14 = *(DWORD*)(globals + 52); + do + { + v15 = RandomIntZeroMax(); + v16 = v25[v13--]; + v17 = v15 % v14--; + v25[v13 + 1] = v25[v17]; + v25[v17] = v16; + } while (v13 >= 1); + globals = g_pGlobals; + } + } + v18 = 1; + do + { + v19 = 0; + v20 = 0; + if (*(int*)(globals + 52) > 0) + { + v21 = v25; + do + { + v22 = *v21; + if (*v21) + { + *(__int64*)(base + 0x1210420) = *v21; + *(float*)(globals + 16) = a2; + v23 = sub_1805A6E50(v22, v12, v18); + globals = g_pGlobals; + if (v23) + v19 = 1; + else + *v21 = 0i64; + } + ++v20; + ++v21; + } while (v20 < *(DWORD*)(globals + 52)); + } + v18 = 0; + } while (v19); + if (*(int*)(globals + 52) >= 1) + { + do + { + v24 = UTIL_PlayerByIndex(v5); + if (v24) + { + *(__int64*)(base + 0x1210420) = v24; + *(float*)(g_pGlobals + 16) = a2; + sub_1805A6C20(v24); + } + ++v5; + } while (v5 <= *(DWORD*)(g_pGlobals + 52)); + } + sub_180485590(*(__int64*)(base + 0xB7B2D8)); + } +} + +typedef __int64(*SendPropArray2_Type)(__int64 recvProp, int elements, int flags, const char* name, __int64 proxyFn, unsigned char unk1); +SendPropArray2_Type SendPropArray2_Original; + +__int64 __fastcall SendPropArray2_Hook(__int64 recvProp, int elements, int flags, const char* name, __int64 proxyFn, unsigned char unk1) +{ + // Change the amount of elements to account for a bigger player amount + if (!strcmp(name, "\"player_array\"")) + elements = NEW_MAX_PLAYERS; + + return SendPropArray2_Original(recvProp, elements, flags, name, proxyFn, unk1); +} + +void InitialiseMaxPlayersOverride_Server(HMODULE baseAddress) +{ + if (!MaxPlayersIncreaseEnabled()) + return; + + // get required data + serverBase = GetModuleHandleA("server.dll"); + RandomIntZeroMax = (decltype(RandomIntZeroMax))(GetProcAddress(GetModuleHandleA("vstdlib.dll"), "RandomIntZeroMax")); + + // patch max players amount + ChangeOffset<unsigned char>((char*)baseAddress + 0x9A44D + 3, NEW_MAX_PLAYERS); // 0x20 (32) => 0x80 (128) + + // patch SpawnGlobalNonRewinding to change forced edict index + ChangeOffset<unsigned char>((char*)baseAddress + 0x2BC403 + 2, NEW_MAX_PLAYERS + 1); // original: 33 (32 + 1) + + constexpr int CPlayerResource_OriginalSize = 4776; + constexpr int CPlayerResource_AddedSize = PlayerResource_TotalSize; + constexpr int CPlayerResource_ModifiedSize = CPlayerResource_OriginalSize + CPlayerResource_AddedSize; + + // CPlayerResource class allocation function - allocate a bigger amount to fit all new max player data + ChangeOffset<unsigned int>((char*)baseAddress + 0x5C560A + 1, CPlayerResource_ModifiedSize); + + // DT_PlayerResource::m_iPing SendProp + ChangeOffset<unsigned int>((char*)baseAddress + 0x5C5059 + 2, CPlayerResource_OriginalSize + PlayerResource_Ping_Start); + ChangeOffset<unsigned int>((char*)baseAddress + 0x5C50A8 + 2, CPlayerResource_OriginalSize + PlayerResource_Ping_Start); + ChangeOffset<unsigned int>((char*)baseAddress + 0x5C50E2 + 4, NEW_MAX_PLAYERS + 1); + + // DT_PlayerResource::m_iPing DataMap + ChangeOffset<unsigned int>((char*)baseAddress + 0xB94598, CPlayerResource_OriginalSize + PlayerResource_Ping_Start); + ChangeOffset<unsigned short>((char*)baseAddress + 0xB9459C, NEW_MAX_PLAYERS + 1); + ChangeOffset<unsigned short>((char*)baseAddress + 0xB945C0, PlayerResource_Ping_Size); + + // DT_PlayerResource::m_iTeam SendProp + ChangeOffset<unsigned int>((char*)baseAddress + 0x5C5110 + 2, CPlayerResource_OriginalSize + PlayerResource_Team_Start); + ChangeOffset<unsigned int>((char*)baseAddress + 0x5C519C + 2, CPlayerResource_OriginalSize + PlayerResource_Team_Start); + ChangeOffset<unsigned int>((char*)baseAddress + 0x5C517E + 4, NEW_MAX_PLAYERS + 1); + + // DT_PlayerResource::m_iTeam DataMap + ChangeOffset<unsigned int>((char*)baseAddress + 0xB94600, CPlayerResource_OriginalSize + PlayerResource_Team_Start); + ChangeOffset<unsigned short>((char*)baseAddress + 0xB94604, NEW_MAX_PLAYERS + 1); + ChangeOffset<unsigned short>((char*)baseAddress + 0xB94628, PlayerResource_Team_Size); + + // DT_PlayerResource::m_iPRHealth SendProp + ChangeOffset<unsigned int>((char*)baseAddress + 0x5C51C0 + 2, CPlayerResource_OriginalSize + PlayerResource_PRHealth_Start); + ChangeOffset<unsigned int>((char*)baseAddress + 0x5C5204 + 2, CPlayerResource_OriginalSize + PlayerResource_PRHealth_Start); + ChangeOffset<unsigned int>((char*)baseAddress + 0x5C523E + 4, NEW_MAX_PLAYERS + 1); + + // DT_PlayerResource::m_iPRHealth DataMap + ChangeOffset<unsigned int>((char*)baseAddress + 0xB94668, CPlayerResource_OriginalSize + PlayerResource_PRHealth_Start); + ChangeOffset<unsigned short>((char*)baseAddress + 0xB9466C, NEW_MAX_PLAYERS + 1); + ChangeOffset<unsigned short>((char*)baseAddress + 0xB94690, PlayerResource_PRHealth_Size); + + // DT_PlayerResource::m_bConnected SendProp + ChangeOffset<unsigned int>((char*)baseAddress + 0x5C526C + 2, CPlayerResource_OriginalSize + PlayerResource_Connected_Start); + ChangeOffset<unsigned int>((char*)baseAddress + 0x5C52B4 + 2, CPlayerResource_OriginalSize + PlayerResource_Connected_Start); + ChangeOffset<unsigned int>((char*)baseAddress + 0x5C52EE + 4, NEW_MAX_PLAYERS + 1); + + // DT_PlayerResource::m_bConnected DataMap + ChangeOffset<unsigned int>((char*)baseAddress + 0xB946D0, CPlayerResource_OriginalSize + PlayerResource_Connected_Start); + ChangeOffset<unsigned short>((char*)baseAddress + 0xB946D4, NEW_MAX_PLAYERS + 1); + ChangeOffset<unsigned short>((char*)baseAddress + 0xB946F8, PlayerResource_Connected_Size); + + // DT_PlayerResource::m_bAlive SendProp + ChangeOffset<unsigned int>((char*)baseAddress + 0x5C5321 + 2, CPlayerResource_OriginalSize + PlayerResource_Alive_Start); + ChangeOffset<unsigned int>((char*)baseAddress + 0x5C5364 + 2, CPlayerResource_OriginalSize + PlayerResource_Alive_Start); + ChangeOffset<unsigned int>((char*)baseAddress + 0x5C539E + 4, NEW_MAX_PLAYERS + 1); + + // DT_PlayerResource::m_bAlive DataMap + ChangeOffset<unsigned int>((char*)baseAddress + 0xB94738, CPlayerResource_OriginalSize + PlayerResource_Alive_Start); + ChangeOffset<unsigned short>((char*)baseAddress + 0xB9473C, NEW_MAX_PLAYERS + 1); + ChangeOffset<unsigned short>((char*)baseAddress + 0xB94760, PlayerResource_Alive_Size); + + // DT_PlayerResource::m_boolStats SendProp + ChangeOffset<unsigned int>((char*)baseAddress + 0x5C53CC + 2, CPlayerResource_OriginalSize + PlayerResource_BoolStats_Start); + ChangeOffset<unsigned int>((char*)baseAddress + 0x5C5414 + 2, CPlayerResource_OriginalSize + PlayerResource_BoolStats_Start); + ChangeOffset<unsigned int>((char*)baseAddress + 0x5C544E + 4, NEW_MAX_PLAYERS + 1); + + // DT_PlayerResource::m_boolStats DataMap + ChangeOffset<unsigned int>((char*)baseAddress + 0xB947A0, CPlayerResource_OriginalSize + PlayerResource_BoolStats_Start); + ChangeOffset<unsigned short>((char*)baseAddress + 0xB947A4, NEW_MAX_PLAYERS + 1); + ChangeOffset<unsigned short>((char*)baseAddress + 0xB947C8, PlayerResource_BoolStats_Size); + + // DT_PlayerResource::m_killStats SendProp + ChangeOffset<unsigned int>((char*)baseAddress + 0x5C547C + 2, CPlayerResource_OriginalSize + PlayerResource_KillStats_Start); + ChangeOffset<unsigned int>((char*)baseAddress + 0x5C54E2 + 2, CPlayerResource_OriginalSize + PlayerResource_KillStats_Start); + ChangeOffset<unsigned int>((char*)baseAddress + 0x5C54FE + 4, PlayerResource_KillStats_Length); + + // DT_PlayerResource::m_killStats DataMap + ChangeOffset<unsigned int>((char*)baseAddress + 0xB94808, CPlayerResource_OriginalSize + PlayerResource_KillStats_Start); + ChangeOffset<unsigned short>((char*)baseAddress + 0xB9480C, PlayerResource_KillStats_Length); + ChangeOffset<unsigned short>((char*)baseAddress + 0xB94830, PlayerResource_KillStats_Size); + + // DT_PlayerResource::m_scoreStats SendProp + ChangeOffset<unsigned int>((char*)baseAddress + 0x5C5528 + 2, CPlayerResource_OriginalSize + PlayerResource_ScoreStats_Start); + ChangeOffset<unsigned int>((char*)baseAddress + 0x5C5576 + 2, CPlayerResource_OriginalSize + PlayerResource_ScoreStats_Start); + ChangeOffset<unsigned int>((char*)baseAddress + 0x5C5584 + 4, PlayerResource_ScoreStats_Length); + + // DT_PlayerResource::m_scoreStats DataMap + ChangeOffset<unsigned int>((char*)baseAddress + 0xB94870, CPlayerResource_OriginalSize + PlayerResource_ScoreStats_Start); + ChangeOffset<unsigned short>((char*)baseAddress + 0xB94874, PlayerResource_ScoreStats_Length); + ChangeOffset<unsigned short>((char*)baseAddress + 0xB94898, PlayerResource_ScoreStats_Size); + + // CPlayerResource::UpdatePlayerData - m_bConnected + ChangeOffset<unsigned int>((char*)baseAddress + 0x5C66EE + 4, CPlayerResource_OriginalSize + PlayerResource_Connected_Start); + ChangeOffset<unsigned int>((char*)baseAddress + 0x5C672E + 4, CPlayerResource_OriginalSize + PlayerResource_Connected_Start); + + // CPlayerResource::UpdatePlayerData - m_iPing + ChangeOffset<unsigned int>((char*)baseAddress + 0x5C6394 + 4, CPlayerResource_OriginalSize + PlayerResource_Ping_Start); + ChangeOffset<unsigned int>((char*)baseAddress + 0x5C63DB + 4, CPlayerResource_OriginalSize + PlayerResource_Ping_Start); + + // CPlayerResource::UpdatePlayerData - m_iTeam + ChangeOffset<unsigned int>((char*)baseAddress + 0x5C63FD + 4, CPlayerResource_OriginalSize + PlayerResource_Team_Start); + ChangeOffset<unsigned int>((char*)baseAddress + 0x5C6442 + 4, CPlayerResource_OriginalSize + PlayerResource_Team_Start); + + // CPlayerResource::UpdatePlayerData - m_iPRHealth + ChangeOffset<unsigned int>((char*)baseAddress + 0x5C645B + 4, CPlayerResource_OriginalSize + PlayerResource_PRHealth_Start); + ChangeOffset<unsigned int>((char*)baseAddress + 0x5C64A0 + 4, CPlayerResource_OriginalSize + PlayerResource_PRHealth_Start); + + // CPlayerResource::UpdatePlayerData - m_bConnected + ChangeOffset<unsigned int>((char*)baseAddress + 0x5C64AA + 4, CPlayerResource_OriginalSize + PlayerResource_Connected_Start); + ChangeOffset<unsigned int>((char*)baseAddress + 0x5C64F0 + 4, CPlayerResource_OriginalSize + PlayerResource_Connected_Start); + + // CPlayerResource::UpdatePlayerData - m_bAlive + ChangeOffset<unsigned int>((char*)baseAddress + 0x5C650A + 4, CPlayerResource_OriginalSize + PlayerResource_Alive_Start); + ChangeOffset<unsigned int>((char*)baseAddress + 0x5C654F + 4, CPlayerResource_OriginalSize + PlayerResource_Alive_Start); + + // CPlayerResource::UpdatePlayerData - m_boolStats + ChangeOffset<unsigned int>((char*)baseAddress + 0x5C6557 + 4, CPlayerResource_OriginalSize + PlayerResource_BoolStats_Start); + ChangeOffset<unsigned int>((char*)baseAddress + 0x5C65A5 + 4, CPlayerResource_OriginalSize + PlayerResource_BoolStats_Start); + + // CPlayerResource::UpdatePlayerData - m_scoreStats + ChangeOffset<unsigned int>((char*)baseAddress + 0x5C65C2 + 3, CPlayerResource_OriginalSize + PlayerResource_ScoreStats_Start); + ChangeOffset<unsigned int>((char*)baseAddress + 0x5C65E3 + 4, CPlayerResource_OriginalSize + PlayerResource_ScoreStats_Start); + + // CPlayerResource::UpdatePlayerData - m_killStats + ChangeOffset<unsigned int>((char*)baseAddress + 0x5C6654 + 3, CPlayerResource_OriginalSize + PlayerResource_KillStats_Start); + ChangeOffset<unsigned int>((char*)baseAddress + 0x5C665B + 3, CPlayerResource_OriginalSize + PlayerResource_KillStats_Start); + + // GameLoop::RunUserCmds - rebuild + HookEnabler hook; + ENABLER_CREATEHOOK(hook, (char*)baseAddress + 0x483D10, &RunUserCmds_Hook, reinterpret_cast<LPVOID*>(&RunUserCmds_Original)); + + *(DWORD*)((char*)baseAddress + 0x14E7390) = 0; + auto DT_PlayerResource_Construct = (__int64(__fastcall*)())((char*)baseAddress + 0x5C4FE0); + DT_PlayerResource_Construct(); + + constexpr int CTeam_OriginalSize = 3336; + constexpr int CTeam_AddedSize = Team_AddedSize; + constexpr int CTeam_ModifiedSize = CTeam_OriginalSize + CTeam_AddedSize; + + // CTeam class allocation function - allocate a bigger amount to fit all new team player data + ChangeOffset<unsigned int>((char*)baseAddress + 0x23924A + 1, CTeam_ModifiedSize); + + // CTeam::CTeam - increase memset length to clean newly allocated data + ChangeOffset<unsigned int>((char*)baseAddress + 0x2395AE + 2, 256 + CTeam_AddedSize); + + // hook required to change the size of DT_Team::"player_array" + HookEnabler hook2; + ENABLER_CREATEHOOK(hook2, (char*)baseAddress + 0x12B130, &SendPropArray2_Hook, reinterpret_cast<LPVOID*>(&SendPropArray2_Original)); + hook2.~HookEnabler(); // force hook before calling construct function + + *(DWORD*)((char*)baseAddress + 0xC945A0) = 0; + auto DT_Team_Construct = (__int64(__fastcall*)())((char*)baseAddress + 0x238F50); + DT_Team_Construct(); +} + +typedef __int64(*RecvPropArray2_Type)(__int64 recvProp, int elements, int flags, const char* name, __int64 proxyFn); +RecvPropArray2_Type RecvPropArray2_Original; + +__int64 __fastcall RecvPropArray2_Hook(__int64 recvProp, int elements, int flags, const char* name, __int64 proxyFn) +{ + // Change the amount of elements to account for a bigger player amount + if (!strcmp(name, "\"player_array\"")) + elements = NEW_MAX_PLAYERS; + + return RecvPropArray2_Original(recvProp, elements, flags, name, proxyFn); +} + +void InitialiseMaxPlayersOverride_Client(HMODULE baseAddress) +{ + if (!MaxPlayersIncreaseEnabled()) + return; + + constexpr int C_PlayerResource_OriginalSize = 5768; + constexpr int C_PlayerResource_AddedSize = PlayerResource_TotalSize; + constexpr int C_PlayerResource_ModifiedSize = C_PlayerResource_OriginalSize + C_PlayerResource_AddedSize; + + // C_PlayerResource class allocation function - allocate a bigger amount to fit all new max player data + ChangeOffset<unsigned int>((char*)baseAddress + 0x164C41 + 1, C_PlayerResource_ModifiedSize); + + // C_PlayerResource::C_PlayerResource - change loop end value + ChangeOffset<unsigned char>((char*)baseAddress + 0x1640C4 + 2, NEW_MAX_PLAYERS - 32); + + // C_PlayerResource::C_PlayerResource - change m_szName address + ChangeOffset<unsigned int>((char*)baseAddress + 0x1640D0 + 3, C_PlayerResource_OriginalSize + PlayerResource_Name_Start); // appended to the end of the class + + // C_PlayerResource::C_PlayerResource - change m_szName address + ChangeOffset<unsigned int>((char*)baseAddress + 0x1640D0 + 3, C_PlayerResource_OriginalSize + PlayerResource_Name_Start); // appended to the end of the class + + // C_PlayerResource::C_PlayerResource - increase memset length to clean newly allocated data + ChangeOffset<unsigned int>((char*)baseAddress + 0x1640D0 + 3, 2244 + C_PlayerResource_AddedSize); + + // C_PlayerResource::UpdatePlayerName - change m_szName address + ChangeOffset<unsigned int>((char*)baseAddress + 0x16431F + 3, C_PlayerResource_OriginalSize + PlayerResource_Name_Start); + + // C_PlayerResource::GetPlayerName - change m_szName address 1 + ChangeOffset<unsigned int>((char*)baseAddress + 0x1645B1 + 3, C_PlayerResource_OriginalSize + PlayerResource_Name_Start); + + // C_PlayerResource::GetPlayerName - change m_szName address 2 + ChangeOffset<unsigned int>((char*)baseAddress + 0x1645C0 + 3, C_PlayerResource_OriginalSize + PlayerResource_Name_Start); + + // C_PlayerResource::GetPlayerName - change m_szName address 3 + ChangeOffset<unsigned int>((char*)baseAddress + 0x1645DD + 3, C_PlayerResource_OriginalSize + PlayerResource_Name_Start); + + // C_PlayerResource::GetPlayerName internal func - change m_szName address 1 + ChangeOffset<unsigned int>((char*)baseAddress + 0x164B71 + 4, C_PlayerResource_OriginalSize + PlayerResource_Name_Start); + + // C_PlayerResource::GetPlayerName internal func - change m_szName address 2 + ChangeOffset<unsigned int>((char*)baseAddress + 0x164B9B + 4, C_PlayerResource_OriginalSize + PlayerResource_Name_Start); + + // C_PlayerResource::GetPlayerName2 (?) - change m_szName address 1 + ChangeOffset<unsigned int>((char*)baseAddress + 0x164641 + 3, C_PlayerResource_OriginalSize + PlayerResource_Name_Start); + + // C_PlayerResource::GetPlayerName2 (?) - change m_szName address 2 + ChangeOffset<unsigned int>((char*)baseAddress + 0x164650 + 3, C_PlayerResource_OriginalSize + PlayerResource_Name_Start); + + // C_PlayerResource::GetPlayerName2 (?) - change m_szName address 3 + ChangeOffset<unsigned int>((char*)baseAddress + 0x16466D + 3, C_PlayerResource_OriginalSize + PlayerResource_Name_Start); + + // C_PlayerResource::GetPlayerName internal func - change m_szName2 (?) address 1 + ChangeOffset<unsigned int>((char*)baseAddress + 0x164BA3 + 4, C_PlayerResource_OriginalSize + PlayerResource_Name_Start); + + // C_PlayerResource::GetPlayerName internal func - change m_szName2 (?) address 2 + ChangeOffset<unsigned int>((char*)baseAddress + 0x164BCE + 4, C_PlayerResource_OriginalSize + PlayerResource_Name_Start); + + // C_PlayerResource::GetPlayerName internal func - change m_szName2 (?) address 3 + ChangeOffset<unsigned int>((char*)baseAddress + 0x164BE7 + 4, C_PlayerResource_OriginalSize + PlayerResource_Name_Start); + + // C_PlayerResource::m_szName + ChangeOffset<unsigned int>((char*)baseAddress + 0xc350f8, C_PlayerResource_OriginalSize + PlayerResource_Name_Start); + ChangeOffset<unsigned short>((char*)baseAddress + 0xc350f8 + 4, NEW_MAX_PLAYERS + 1); + + // DT_PlayerResource size + ChangeOffset<unsigned int>((char*)baseAddress + 0x163415 + 6, C_PlayerResource_ModifiedSize); + + // DT_PlayerResource::m_iPing RecvProp + ChangeOffset<unsigned int>((char*)baseAddress + 0x163492 + 2, C_PlayerResource_OriginalSize + PlayerResource_Ping_Start); + ChangeOffset<unsigned int>((char*)baseAddress + 0x1634D6 + 2, C_PlayerResource_OriginalSize + PlayerResource_Ping_Start); + ChangeOffset<unsigned int>((char*)baseAddress + 0x163515 + 5, NEW_MAX_PLAYERS + 1); + + // C_PlayerResource::m_iPing + ChangeOffset<unsigned int>((char*)baseAddress + 0xc35170, C_PlayerResource_OriginalSize + PlayerResource_Ping_Start); + ChangeOffset<unsigned short>((char*)baseAddress + 0xc35170 + 4, NEW_MAX_PLAYERS + 1); + + // DT_PlayerResource::m_iTeam RecvProp + ChangeOffset<unsigned int>((char*)baseAddress + 0x163549 + 2, C_PlayerResource_OriginalSize + PlayerResource_Team_Start); + ChangeOffset<unsigned int>((char*)baseAddress + 0x1635C8 + 2, C_PlayerResource_OriginalSize + PlayerResource_Team_Start); + ChangeOffset<unsigned int>((char*)baseAddress + 0x1635AD + 5, NEW_MAX_PLAYERS + 1); + + // C_PlayerResource::m_iTeam + ChangeOffset<unsigned int>((char*)baseAddress + 0xc351e8, C_PlayerResource_OriginalSize + PlayerResource_Team_Start); + ChangeOffset<unsigned short>((char*)baseAddress + 0xc351e8 + 4, NEW_MAX_PLAYERS + 1); + + // DT_PlayerResource::m_iPRHealth RecvProp + ChangeOffset<unsigned int>((char*)baseAddress + 0x1635F9 + 2, C_PlayerResource_OriginalSize + PlayerResource_PRHealth_Start); + ChangeOffset<unsigned int>((char*)baseAddress + 0x163625 + 2, C_PlayerResource_OriginalSize + PlayerResource_PRHealth_Start); + ChangeOffset<unsigned int>((char*)baseAddress + 0x163675 + 5, NEW_MAX_PLAYERS + 1); + + // C_PlayerResource::m_iPRHealth + ChangeOffset<unsigned int>((char*)baseAddress + 0xc35260, C_PlayerResource_OriginalSize + PlayerResource_PRHealth_Start); + ChangeOffset<unsigned short>((char*)baseAddress + 0xc35260 + 4, NEW_MAX_PLAYERS + 1); + + // DT_PlayerResource::m_bConnected RecvProp + ChangeOffset<unsigned int>((char*)baseAddress + 0x1636A9 + 2, C_PlayerResource_OriginalSize + PlayerResource_Connected_Start); + ChangeOffset<unsigned int>((char*)baseAddress + 0x1636D5 + 2, C_PlayerResource_OriginalSize + PlayerResource_Connected_Start); + ChangeOffset<unsigned int>((char*)baseAddress + 0x163725 + 5, NEW_MAX_PLAYERS + 1); + + // C_PlayerResource::m_bConnected + ChangeOffset<unsigned int>((char*)baseAddress + 0xc352d8, C_PlayerResource_OriginalSize + PlayerResource_Connected_Start); + ChangeOffset<unsigned short>((char*)baseAddress + 0xc352d8 + 4, NEW_MAX_PLAYERS + 1); + + // DT_PlayerResource::m_bAlive RecvProp + ChangeOffset<unsigned int>((char*)baseAddress + 0x163759 + 2, C_PlayerResource_OriginalSize + PlayerResource_Alive_Start); + ChangeOffset<unsigned int>((char*)baseAddress + 0x163785 + 2, C_PlayerResource_OriginalSize + PlayerResource_Alive_Start); + ChangeOffset<unsigned int>((char*)baseAddress + 0x1637D5 + 5, NEW_MAX_PLAYERS + 1); + + // C_PlayerResource::m_bAlive + ChangeOffset<unsigned int>((char*)baseAddress + 0xc35350, C_PlayerResource_OriginalSize + PlayerResource_Alive_Start); + ChangeOffset<unsigned short>((char*)baseAddress + 0xc35350 + 4, NEW_MAX_PLAYERS + 1); + + // DT_PlayerResource::m_boolStats RecvProp + ChangeOffset<unsigned int>((char*)baseAddress + 0x163809 + 2, C_PlayerResource_OriginalSize + PlayerResource_BoolStats_Start); + ChangeOffset<unsigned int>((char*)baseAddress + 0x163835 + 2, C_PlayerResource_OriginalSize + PlayerResource_BoolStats_Start); + ChangeOffset<unsigned int>((char*)baseAddress + 0x163885 + 5, NEW_MAX_PLAYERS + 1); + + // C_PlayerResource::m_boolStats + ChangeOffset<unsigned int>((char*)baseAddress + 0xc353c8, C_PlayerResource_OriginalSize + PlayerResource_BoolStats_Start); + ChangeOffset<unsigned short>((char*)baseAddress + 0xc353c8 + 4, NEW_MAX_PLAYERS + 1); + + // DT_PlayerResource::m_killStats RecvProp + ChangeOffset<unsigned int>((char*)baseAddress + 0x1638B3 + 2, C_PlayerResource_OriginalSize + PlayerResource_KillStats_Start); + ChangeOffset<unsigned int>((char*)baseAddress + 0x1638E5 + 2, C_PlayerResource_OriginalSize + PlayerResource_KillStats_Start); + ChangeOffset<unsigned int>((char*)baseAddress + 0x163935 + 5, PlayerResource_KillStats_Length); + + // C_PlayerResource::m_killStats + ChangeOffset<unsigned int>((char*)baseAddress + 0xc35440, C_PlayerResource_OriginalSize + PlayerResource_KillStats_Start); + ChangeOffset<unsigned short>((char*)baseAddress + 0xc35440 + 4, PlayerResource_KillStats_Length); + + // DT_PlayerResource::m_scoreStats RecvProp + ChangeOffset<unsigned int>((char*)baseAddress + 0x163969 + 2, C_PlayerResource_OriginalSize + PlayerResource_ScoreStats_Start); + ChangeOffset<unsigned int>((char*)baseAddress + 0x163995 + 2, C_PlayerResource_OriginalSize + PlayerResource_ScoreStats_Start); + ChangeOffset<unsigned int>((char*)baseAddress + 0x1639E5 + 5, PlayerResource_ScoreStats_Length); + + // C_PlayerResource::m_scoreStats + ChangeOffset<unsigned int>((char*)baseAddress + 0xc354b8, C_PlayerResource_OriginalSize + PlayerResource_ScoreStats_Start); + ChangeOffset<unsigned short>((char*)baseAddress + 0xc354b8 + 4, PlayerResource_ScoreStats_Length); + + // C_PlayerResource::GetPlayerName - change m_bConnected address + ChangeOffset<unsigned int>((char*)baseAddress + 0x164599 + 3, C_PlayerResource_OriginalSize + PlayerResource_Connected_Start); + + // C_PlayerResource::GetPlayerName2 (?) - change m_bConnected address + ChangeOffset<unsigned int>((char*)baseAddress + 0x164629 + 3, C_PlayerResource_OriginalSize + PlayerResource_Connected_Start); + + // C_PlayerResource::GetPlayerName internal func - change m_bConnected address + ChangeOffset<unsigned int>((char*)baseAddress + 0x164B13 + 3, C_PlayerResource_OriginalSize + PlayerResource_Connected_Start); + + // Some other get name func (that seems to be unused) - change m_bConnected address + ChangeOffset<unsigned int>((char*)baseAddress + 0x164860 + 3, C_PlayerResource_OriginalSize + PlayerResource_Connected_Start); + + // Some other get name func 2 (that seems to be unused too) - change m_bConnected address + ChangeOffset<unsigned int>((char*)baseAddress + 0x164834 + 3, C_PlayerResource_OriginalSize + PlayerResource_Connected_Start); + + *(DWORD*)((char*)baseAddress + 0xC35068) = 0; + auto DT_PlayerResource_Construct = (__int64(__fastcall*)())((char*)baseAddress + 0x163400); + DT_PlayerResource_Construct(); + + constexpr int C_Team_OriginalSize = 3200; + constexpr int C_Team_AddedSize = Team_AddedSize; + constexpr int C_Team_ModifiedSize = C_Team_OriginalSize + C_Team_AddedSize; + + // C_Team class allocation function - allocate a bigger amount to fit all new team player data + ChangeOffset<unsigned int>((char*)baseAddress + 0x182321 + 1, C_Team_ModifiedSize); + + // C_Team::C_Team - increase memset length to clean newly allocated data + ChangeOffset<unsigned int>((char*)baseAddress + 0x1804A2 + 2, 256 + C_Team_AddedSize); + + // DT_Team size + ChangeOffset<unsigned int>((char*)baseAddress + 0xC3AA0C, C_Team_ModifiedSize); + + // hook required to change the size of DT_Team::"player_array" + HookEnabler hook; + ENABLER_CREATEHOOK(hook, (char*)baseAddress + 0x1CEDA0, &RecvPropArray2_Hook, reinterpret_cast<LPVOID*>(&RecvPropArray2_Original)); + hook.~HookEnabler(); // force hook before calling construct function + + *(DWORD*)((char*)baseAddress + 0xC3AFF8) = 0; + auto DT_Team_Construct = (__int64(__fastcall*)())((char*)baseAddress + 0x17F950); + DT_Team_Construct(); +}
\ No newline at end of file diff --git a/NorthstarDedicatedTest/maxplayers.h b/NorthstarDedicatedTest/maxplayers.h new file mode 100644 index 00000000..cd191fc8 --- /dev/null +++ b/NorthstarDedicatedTest/maxplayers.h @@ -0,0 +1,4 @@ +#pragma once +void InitialiseMaxPlayersOverride_Engine(HMODULE baseAddress); +void InitialiseMaxPlayersOverride_Server(HMODULE baseAddress); +void InitialiseMaxPlayersOverride_Client(HMODULE baseAddress);
\ No newline at end of file diff --git a/NorthstarDedicatedTest/memalloc.cpp b/NorthstarDedicatedTest/memalloc.cpp index 113f56b9..1b9eaae8 100644 --- a/NorthstarDedicatedTest/memalloc.cpp +++ b/NorthstarDedicatedTest/memalloc.cpp @@ -2,39 +2,76 @@ #include "memalloc.h" #include "gameutils.h" -// so for anyone reading this code, you may be curious why the fuck i'm overriding new to alloc into a static 100k buffer -// pretty much, the issue here is that we need to use the game's memory allocator (g_pMemAllocSingleton) or risk heap corruptions, but this allocator is defined in tier0 -// as such, it doesn't exist when we inject -// initially i wanted to just call malloc and free until g_pMemAllocSingleton was initialised, but the issue then becomes that we might try to -// call g_pMemAllocSingleton->Free on memory that was allocated with malloc, which will cause game to crash -// so, the best idea i had for this was to just alloc 100k of memory, have all pre-tier0 allocations use that -// (from what i can tell we hit about 12k before tier0 is loaded atm in debug builds, so it's more than enough) -// then just use the game's allocator after that -// yes, this means we leak 100k of memory, idk how else to do this without breaking stuff +// TODO: rename to malloc and free after removing statically compiled .libs -const int STATIC_ALLOC_SIZE = 100000; // alot more than we need, could reduce to 50k or even 25k later potentially - -size_t g_iStaticAllocated = 0; -char pStaticAllocBuf[STATIC_ALLOC_SIZE]; - -void* operator new(size_t n) +extern "C" void* _malloc_base(size_t n) { // allocate into static buffer if g_pMemAllocSingleton isn't initialised - if (g_pMemAllocSingleton) - return g_pMemAllocSingleton->m_vtable->Alloc(g_pMemAllocSingleton, n); - else + if (!g_pMemAllocSingleton) { - void* ret = pStaticAllocBuf + g_iStaticAllocated; - g_iStaticAllocated += n; - return ret; - } + InitialiseTier0GameUtilFunctions(GetModuleHandleA("tier0.dll")); + } + return g_pMemAllocSingleton->m_vtable->Alloc(g_pMemAllocSingleton, n); } -void operator delete(void* p) +/*extern "C" void* malloc(size_t n) { - // if it was allocated into the static buffer, just do nothing, safest way to deal with it - if (p >= pStaticAllocBuf && p <= pStaticAllocBuf + STATIC_ALLOC_SIZE) - return; + return _malloc_base(n); +}*/ +extern "C" void _free_base(void* p) +{ + if (!g_pMemAllocSingleton) + { + spdlog::warn("Trying to free something before g_pMemAllocSingleton was ready, this should never happen"); + InitialiseTier0GameUtilFunctions(GetModuleHandleA("tier0.dll")); + } g_pMemAllocSingleton->m_vtable->Free(g_pMemAllocSingleton, p); -}
\ No newline at end of file +} + + +extern "C" void* _realloc_base(void* oldPtr, size_t size) +{ + if (!g_pMemAllocSingleton) + { + InitialiseTier0GameUtilFunctions(GetModuleHandleA("tier0.dll")); + } + return g_pMemAllocSingleton->m_vtable->Realloc(g_pMemAllocSingleton, oldPtr, size); +} + +extern "C" void* _calloc_base(size_t n, size_t size) +{ + size_t bytes = n * size; + void* memory = _malloc_base(bytes); + if (memory) + { + memset(memory, 0, bytes); + } + return memory; +} + +extern "C" char* _strdup_base(const char* src) +{ + char* str; + char* p; + int len = 0; + + while (src[len]) + len++; + str = reinterpret_cast<char*>(_malloc_base(len + 1)); + p = str; + while (*src) + *p++ = *src++; + *p = '\0'; + return str; +} + +void* operator new(size_t n) +{ + return _malloc_base(n); +} + +void operator delete(void* p) +{ + _free_base(p); +}// /FORCE:MULTIPLE
\ No newline at end of file diff --git a/NorthstarDedicatedTest/memalloc.h b/NorthstarDedicatedTest/memalloc.h index fe3c5255..92ab9672 100644 --- a/NorthstarDedicatedTest/memalloc.h +++ b/NorthstarDedicatedTest/memalloc.h @@ -1,6 +1,42 @@ #pragma once -extern size_t g_iStaticAllocated; +#include "include/rapidjson/document.h" +//#include "include/rapidjson/allocators.h" + +extern "C" void* _malloc_base(size_t size); +extern "C" void* _calloc_base(size_t const count, size_t const size); +extern "C" void* _realloc_base(void* block, size_t size); +extern "C" void* _recalloc_base(void* const block, size_t const count, size_t const size); +extern "C" void _free_base(void* const block); +extern "C" char* _strdup_base(const char* src); void* operator new(size_t n); -void operator delete(void* p);
\ No newline at end of file +void operator delete(void* p); + +//void* malloc(size_t n); + +class SourceAllocator { +public: + static const bool kNeedFree = true; + void* Malloc(size_t size) { + if (size) // behavior of malloc(0) is implementation defined. + return _malloc_base(size); + else + return NULL; // standardize to returning NULL. + } + void* Realloc(void* originalPtr, size_t originalSize, size_t newSize) { + (void)originalSize; + if (newSize == 0) { + _free_base(originalPtr); + return NULL; + } + return _realloc_base(originalPtr, newSize); + } + static void Free(void* ptr) { _free_base(ptr); } +}; + +typedef rapidjson::GenericDocument<rapidjson::UTF8<>, rapidjson::MemoryPoolAllocator<SourceAllocator>, SourceAllocator> rapidjson_document; +//typedef rapidjson::GenericDocument<rapidjson::UTF8<>, SourceAllocator, SourceAllocator> rapidjson_document; +//typedef rapidjson::Document rapidjson_document; +//using MyDocument = rapidjson::GenericDocument<rapidjson::UTF8<>, MemoryAllocator>; +//using rapidjson_document = rapidjson::GenericDocument<rapidjson::UTF8<>, SourceAllocator, SourceAllocator>; diff --git a/NorthstarDedicatedTest/miscclientfixes.cpp b/NorthstarDedicatedTest/miscclientfixes.cpp index d9fab647..dc68d18c 100644 --- a/NorthstarDedicatedTest/miscclientfixes.cpp +++ b/NorthstarDedicatedTest/miscclientfixes.cpp @@ -37,4 +37,10 @@ void InitialiseMiscClientFixes(HMODULE baseAddress) // will say i have about 0 clue what exactly these functions do, testing this it doesn't even seem like they do much of anything i can see tbh ENABLER_CREATEHOOK(hook, (char*)baseAddress + 0x5A92D0, &CrashingWeaponActivityFunc0Hook, reinterpret_cast<LPVOID*>(&CrashingWeaponActivityFunc0)); ENABLER_CREATEHOOK(hook, (char*)baseAddress + 0x5A9310, &CrashingWeaponActivityFunc1Hook, reinterpret_cast<LPVOID*>(&CrashingWeaponActivityFunc1)); + + // experimental: allow cl_extrapolate to be enabled without cheats + { + void* ptr = (char*)baseAddress + 0x275F9D9; + *((char*)ptr) = (char)0; + } }
\ No newline at end of file diff --git a/NorthstarDedicatedTest/miscserverscript.h b/NorthstarDedicatedTest/miscserverscript.h index b3e0580a..8197e502 100644 --- a/NorthstarDedicatedTest/miscserverscript.h +++ b/NorthstarDedicatedTest/miscserverscript.h @@ -1 +1,2 @@ -void InitialiseMiscServerScriptCommand(HMODULE baseAddress);
\ No newline at end of file +void InitialiseMiscServerScriptCommand(HMODULE baseAddress); +void* GetPlayerByIndex(int playerIndex);
\ No newline at end of file diff --git a/NorthstarDedicatedTest/modmanager.cpp b/NorthstarDedicatedTest/modmanager.cpp index 4f4a2da0..23dd2d6e 100644 --- a/NorthstarDedicatedTest/modmanager.cpp +++ b/NorthstarDedicatedTest/modmanager.cpp @@ -22,7 +22,7 @@ Mod::Mod(fs::path modDir, char* jsonBuf) ModDirectory = modDir; - rapidjson::Document modJson; + rapidjson_document modJson; modJson.Parse<rapidjson::ParseFlag::kParseCommentsFlag | rapidjson::ParseFlag::kParseTrailingCommasFlag>(jsonBuf); // fail if parse error @@ -309,7 +309,7 @@ void ModManager::LoadMods() if (fs::is_regular_file(file)) { std::string kvStr = file.path().lexically_relative(mod.ModDirectory / "keyvalues").lexically_normal().string(); - mod.KeyValues.insert(std::make_pair(std::hash<std::string>{}(kvStr), kvStr)); + mod.KeyValues.emplace(std::hash<std::string>{}(kvStr), kvStr); } } } @@ -333,7 +333,7 @@ void ModManager::LoadMods() } // in a seperate loop because we register mod files in reverse order, since mods loaded later should have their files prioritised - for (int i = m_loadedMods.size() - 1; i > -1; i--) + for (int64_t i = m_loadedMods.size() - 1; i > -1; i--) { if (!m_loadedMods[i].Enabled) continue; @@ -379,7 +379,7 @@ void ModManager::UnloadMods() // should we be doing this here or should scripts be doing this manually? // main issue with doing this here is when we reload mods for connecting to a server, we write enabled mods, which isn't necessarily what we wanna do if (!m_enabledModsCfg.HasMember(mod.Name.c_str())) - m_enabledModsCfg.AddMember(rapidjson::StringRef(mod.Name.c_str()), rapidjson::Value(false), m_enabledModsCfg.GetAllocator()); + m_enabledModsCfg.AddMember(rapidjson_document::StringRefType(mod.Name.c_str()), rapidjson_document::GenericValue(false), m_enabledModsCfg.GetAllocator()); m_enabledModsCfg[mod.Name.c_str()].SetBool(mod.Enabled); } diff --git a/NorthstarDedicatedTest/modmanager.h b/NorthstarDedicatedTest/modmanager.h index 5f2f6441..20cb0a42 100644 --- a/NorthstarDedicatedTest/modmanager.h +++ b/NorthstarDedicatedTest/modmanager.h @@ -4,6 +4,7 @@ #include <vector> #include <filesystem> #include "rapidjson/document.h" +#include "memalloc.h" namespace fs = std::filesystem; @@ -100,7 +101,7 @@ class ModManager private: bool m_hasLoadedMods = false; bool m_hasEnabledModsCfg; - rapidjson::Document m_enabledModsCfg; + rapidjson_document m_enabledModsCfg; // precalculated hashes size_t m_hScriptsRsonHash; diff --git a/NorthstarDedicatedTest/pch.h b/NorthstarDedicatedTest/pch.h index c54fedf8..a07d1401 100644 --- a/NorthstarDedicatedTest/pch.h +++ b/NorthstarDedicatedTest/pch.h @@ -9,14 +9,14 @@ #define RAPIDJSON_HAS_STDSTRING 1 // httplib ssl -#define CPPHTTPLIB_OPENSSL_SUPPORT -#define OPENSSL_API_COMPAT 0x1010100fL // add headers that you want to pre-compile here +#include "memalloc.h" #include <Windows.h> #include "logging.h" #include "include/MinHook.h" #include "spdlog/spdlog.h" +#include "libcurl/include/curl/curl.h" #include "hookutils.h" #endif
\ No newline at end of file diff --git a/NorthstarDedicatedTest/playlist.cpp b/NorthstarDedicatedTest/playlist.cpp index 47fb109c..9cbd0c05 100644 --- a/NorthstarDedicatedTest/playlist.cpp +++ b/NorthstarDedicatedTest/playlist.cpp @@ -56,7 +56,7 @@ void SetPlaylistVarOverrideHook(const char* varName, const char* value) char* GetCurrentPlaylistVarHook(const char* varName, bool useOverrides) { - if (!useOverrides && !strcmp(varName, "max_players")) + if (!useOverrides && CommandLine()->CheckParm("-maxplayersplaylist") && !strcmp(varName, "max_players")) useOverrides = true; return GetCurrentPlaylistVarOriginal(varName, useOverrides); @@ -64,13 +64,14 @@ char* GetCurrentPlaylistVarHook(const char* varName, bool useOverrides) int GetCurrentGamemodeMaxPlayersHook() { + if (!CommandLine()->CheckParm("-maxplayersplaylist")) + return GetCurrentGamemodeMaxPlayers(); + char* maxPlayersStr = GetCurrentPlaylistVar("max_players", 0); if (!maxPlayersStr) return GetCurrentGamemodeMaxPlayers(); int maxPlayers = atoi(maxPlayersStr); - spdlog::info("Overwrote max_players to {}", maxPlayers); - return maxPlayers; } @@ -94,7 +95,7 @@ void InitialisePlaylistHooks(HMODULE baseAddress) { void* ptr = (char*)baseAddress + 0x18ED8D; TempReadWrite rw(ptr); - *((char*)ptr) = 0xC3; // jmp => ret + *((char*)ptr) = (char)0xC3; // jmp => ret } if (IsDedicated()) diff --git a/NorthstarDedicatedTest/rpakfilesystem.cpp b/NorthstarDedicatedTest/rpakfilesystem.cpp new file mode 100644 index 00000000..006a57c5 --- /dev/null +++ b/NorthstarDedicatedTest/rpakfilesystem.cpp @@ -0,0 +1,44 @@ +#include "pch.h" +#include "rpakfilesystem.h" +#include "hookutils.h" +#include "modmanager.h" + +typedef void*(*LoadCommonPaksForMapType)(char* map); +LoadCommonPaksForMapType LoadCommonPaksForMap; + +typedef void*(*LoadPakSyncType)(char* path, void* unknownSingleton, int flags); +typedef void*(*LoadPakAsyncType)(char* path, void* unknownSingleton, int flags, void* callback0, void* callback1); + +// there are more i'm just too lazy to add +struct PakLoadFuncs +{ + void* unknown[2]; + LoadPakSyncType func2; + LoadPakAsyncType LoadPakAsync; +}; + +PakLoadFuncs* g_pakLoadApi; +void** pUnknownPakLoadSingleton; + +void LoadPakAsync(char* path) +{ + g_pakLoadApi->LoadPakAsync(path, *pUnknownPakLoadSingleton, 2, nullptr, nullptr); +} + +void LoadCommonPaksForMapHook(char* map) +{ + LoadCommonPaksForMap(map); + + // for sp => mp conversions, load the sp rpaks + if (!strcmp(map, "mp_skyway_v1") || !strcmp(map, "mp_crashsite") || !strcmp(map, "mp_hub_timeshift")) + map[0] = 's'; +} + +void InitialiseEngineRpakFilesystem(HMODULE baseAddress) +{ + g_pakLoadApi = (PakLoadFuncs*)((char*)baseAddress + 0x5BED78); + pUnknownPakLoadSingleton = (void**)((char*)baseAddress + 0x7C5E20); + + HookEnabler hook; + ENABLER_CREATEHOOK(hook, (char*)baseAddress + 0x15AD20, &LoadCommonPaksForMapHook, reinterpret_cast<LPVOID*>(&LoadCommonPaksForMap)); +}
\ No newline at end of file diff --git a/NorthstarDedicatedTest/rpakfilesystem.h b/NorthstarDedicatedTest/rpakfilesystem.h new file mode 100644 index 00000000..a9cc9a93 --- /dev/null +++ b/NorthstarDedicatedTest/rpakfilesystem.h @@ -0,0 +1,4 @@ +#pragma once + +void InitialiseEngineRpakFilesystem(HMODULE baseAddress); +void LoadPakAsync(char* path);
\ No newline at end of file diff --git a/NorthstarDedicatedTest/serverauthentication.cpp b/NorthstarDedicatedTest/serverauthentication.cpp index 5351dfdc..da84280c 100644 --- a/NorthstarDedicatedTest/serverauthentication.cpp +++ b/NorthstarDedicatedTest/serverauthentication.cpp @@ -5,6 +5,8 @@ #include "masterserver.h" #include "httplib.h" #include "gameutils.h" +#include "bansystem.h" +#include "miscserverscript.h" #include <fstream> #include <filesystem> #include <thread> @@ -22,7 +24,6 @@ CBaseClient__ConnectType CBaseClient__Connect; typedef void(*CBaseClient__ActivatePlayerType)(void* self); CBaseClient__ActivatePlayerType CBaseClient__ActivatePlayer; -typedef void(*CBaseClient__DisconnectType)(void* self, uint32_t unknownButAlways1, const char* reason, ...); CBaseClient__DisconnectType CBaseClient__Disconnect; typedef char(*CGameClient__ExecuteStringCommandType)(void* self, uint32_t unknown, const char* pCommandString); @@ -37,6 +38,10 @@ CBaseClient__SendServerInfoType CBaseClient__SendServerInfo; typedef bool(*ProcessConnectionlessPacketType)(void* a1, netpacket_t* packet); ProcessConnectionlessPacketType ProcessConnectionlessPacket; +typedef void(*CServerGameDLL__OnRecievedSayTextMessageType)(void* self, unsigned int senderClientIndex, const char* message, char unknown); +CServerGameDLL__OnRecievedSayTextMessageType CServerGameDLL__OnRecievedSayTextMessage; + + // global vars ServerAuthenticationManager* g_ServerAuthenticationManager; @@ -48,6 +53,7 @@ ConVar* CVar_sv_quota_stringcmdspersecond; ConVar* Cvar_net_chan_limit_mode; ConVar* Cvar_net_chan_limit_msec_per_sec; ConVar* Cvar_sv_querylimit_per_sec; +ConVar* Cvar_sv_max_chat_messages_per_sec; void ServerAuthenticationManager::StartPlayerAuthServer() { @@ -68,15 +74,15 @@ void ServerAuthenticationManager::StartPlayerAuthServer() m_playerAuthServer.Post("/authenticate_incoming_player", [this](const httplib::Request& request, httplib::Response& response) { // can't just do request.remote_addr == Cvar_ns_masterserver_hostname->m_pszString because the cvar can be a url, gotta resolve an ip from it for comparisons - unsigned long remoteAddr = inet_addr(request.remote_addr.c_str()); - - char* addrPtr = Cvar_ns_masterserver_hostname->m_pszString; - char* typeStart = strstr(addrPtr, "://"); - if (typeStart) - addrPtr = typeStart + 3; - hostent* resolvedRemoteAddr = gethostbyname((const char*)addrPtr); - - if (!request.has_param("id") || !request.has_param("authToken") || request.body.size() >= 65335 || !resolvedRemoteAddr || ((in_addr**)resolvedRemoteAddr->h_addr_list)[0]->S_un.S_addr != remoteAddr) + //unsigned long remoteAddr = inet_addr(request.remote_addr.c_str()); + // + //char* addrPtr = Cvar_ns_masterserver_hostname->m_pszString; + //char* typeStart = strstr(addrPtr, "://"); + //if (typeStart) + // addrPtr = typeStart + 3; + //hostent* resolvedRemoteAddr = gethostbyname((const char*)addrPtr); + + if (!request.has_param("id") || !request.has_param("authToken") || request.body.size() >= 65335 || !request.has_param("serverAuthToken") || strcmp(g_MasterServerManager->m_ownServerAuthToken, request.get_param_value("serverAuthToken").c_str()))// || !resolvedRemoteAddr || ((in_addr**)resolvedRemoteAddr->h_addr_list)[0]->S_un.S_addr != remoteAddr) { response.set_content("{\"success\":false}", "application/json"); return; @@ -117,7 +123,6 @@ void ServerAuthenticationManager::StopPlayerAuthServer() bool ServerAuthenticationManager::AuthenticatePlayer(void* player, int64_t uid, char* authToken) { std::string strUid = std::to_string(uid); - std::lock_guard<std::mutex> guard(m_authDataMutex); bool authFail = true; @@ -142,6 +147,9 @@ bool ServerAuthenticationManager::AuthenticatePlayer(void* player, int64_t uid, if (authFail) { + // set persistent data as ready, we use 0x3 internally to mark the client as using local persistence + *((char*)player + 0x4a0) = (char)0x3; + if (!CVar_ns_auth_allow_insecure->m_nValue) // no auth data and insecure connections aren't allowed, so dc the client return false; @@ -160,16 +168,13 @@ bool ServerAuthenticationManager::AuthenticatePlayer(void* player, int64_t uid, // get file length pdataStream.seekg(0, pdataStream.end); - int length = pdataStream.tellg(); + auto length = pdataStream.tellg(); pdataStream.seekg(0, pdataStream.beg); // copy pdata into buffer pdataStream.read((char*)player + 0x4FA, length); pdataStream.close(); - - // set persistent data as ready, we use 0x3 internally to mark the client as using local persistence - *((char*)player + 0x4a0) = (char)0x3; } return true; // auth successful, client stays on @@ -221,7 +226,7 @@ void ServerAuthenticationManager::WritePersistentData(void* player) // store these in vars so we can use them in CBaseClient::Connect // this is fine because ptrs won't decay by the time we use this, just don't use it outside of cbaseclient::connect char* nextPlayerToken; -int64_t nextPlayerUid; +uint64_t nextPlayerUid; void* CBaseServer__ConnectClientHook(void* server, void* a2, void* a3, uint32_t a4, uint32_t a5, int32_t a6, void* a7, void* a8, char* serverFilter, void* a10, char a11, void* a12, char a13, char a14, int64_t uid, uint32_t a16, uint32_t a17) { @@ -237,6 +242,13 @@ char CBaseClient__ConnectHook(void* self, char* name, __int64 netchan_ptr_arg, c // try to auth player, dc if it fails // we connect irregardless of auth, because returning bad from this function can fuck client state p bad char ret = CBaseClient__Connect(self, name, netchan_ptr_arg, b_fake_player_arg, a5, Buffer, a7); + + if (!g_ServerBanSystem->IsUIDAllowed(nextPlayerUid)) + { + CBaseClient__Disconnect(self, 1, "Banned from server"); + return ret; + } + if (strlen(name) >= 64) // fix for name overflow bug CBaseClient__Disconnect(self, 1, "Invalid name"); else if (!g_ServerAuthenticationManager->AuthenticatePlayer(self, nextPlayerUid, nextPlayerToken) && g_MasterServerManager->m_bRequireClientAuth) @@ -329,8 +341,8 @@ char __fastcall CNetChan___ProcessMessagesHook(void* self, void* buf) double startTime = Plat_FloatTime(); char ret = CNetChan___ProcessMessages(self, buf); - // check processing limit - if (Cvar_net_chan_limit_mode->m_nValue != 0) + // check processing limits, unless we're in a level transition + if (g_pHostState->m_iCurrentState == HostState_t::HS_RUN) { // player that sent the message void* sender = *(void**)((char*)self + 368); @@ -346,19 +358,14 @@ char __fastcall CNetChan___ProcessMessagesHook(void* self, void* buf) g_ServerAuthenticationManager->m_additionalPlayerData[sender].lastNetChanProcessingLimitStart = startTime; g_ServerAuthenticationManager->m_additionalPlayerData[sender].netChanProcessingLimitTime = 0.0; } - g_ServerAuthenticationManager->m_additionalPlayerData[sender].netChanProcessingLimitTime += (Plat_FloatTime() * 1000) - (startTime * 1000); - int32_t limit = Cvar_net_chan_limit_msec_per_sec->m_nValue; - if (g_pHostState->m_iCurrentState != HostState_t::HS_RUN) - limit *= 2; // give clients more headroom in these states, as alot of clients will tend to time out here - - if (g_ServerAuthenticationManager->m_additionalPlayerData[sender].netChanProcessingLimitTime >= limit) + if (g_ServerAuthenticationManager->m_additionalPlayerData[sender].netChanProcessingLimitTime >= Cvar_net_chan_limit_msec_per_sec->m_nValue) { spdlog::warn("Client {} hit netchan processing limit with {}ms of processing time this second (max is {})", (char*)sender + 0x16, g_ServerAuthenticationManager->m_additionalPlayerData[sender].netChanProcessingLimitTime, Cvar_net_chan_limit_msec_per_sec->m_nValue); - // mode 1 = kick, mode 2 = log without kicking - if (Cvar_net_chan_limit_mode->m_nValue == 1) + // nonzero = kick, 0 = warn + if (Cvar_net_chan_limit_mode->m_nValue) { CBaseClient__Disconnect(sender, 1, "Exceeded net channel processing limit"); return false; @@ -424,6 +431,28 @@ bool ProcessConnectionlessPacketHook(void* a1, netpacket_t* packet) return ProcessConnectionlessPacket(a1, packet); } +void CServerGameDLL__OnRecievedSayTextMessageHook(void* self, unsigned int senderClientIndex, const char* message, char unknown) +{ + void* sender = GetPlayerByIndex(senderClientIndex - 1); // senderClientIndex starts at 1 + + // check chat ratelimits + if (Plat_FloatTime() - g_ServerAuthenticationManager->m_additionalPlayerData[sender].lastSayTextLimitStart >= 1.0) + { + g_ServerAuthenticationManager->m_additionalPlayerData[sender].lastSayTextLimitStart = Plat_FloatTime(); + g_ServerAuthenticationManager->m_additionalPlayerData[sender].sayTextLimitCount = 0; + } + + if (g_ServerAuthenticationManager->m_additionalPlayerData[sender].sayTextLimitCount >= Cvar_sv_max_chat_messages_per_sec->m_nValue) + return; + + g_ServerAuthenticationManager->m_additionalPlayerData[sender].sayTextLimitCount++; + + // todo: could censor messages here if we have a banned word list, we do not currently have one of these + // could possibly make this call a script codecallback, or smth + + CServerGameDLL__OnRecievedSayTextMessage(self, senderClientIndex, message, unknown); +} + void InitialiseServerAuthentication(HMODULE baseAddress) { g_ServerAuthenticationManager = new ServerAuthenticationManager; @@ -434,10 +463,11 @@ void InitialiseServerAuthentication(HMODULE baseAddress) // literally just stolen from a fix valve used in csgo CVar_sv_quota_stringcmdspersecond = RegisterConVar("sv_quota_stringcmdspersecond", "60", FCVAR_GAMEDLL, "How many string commands per second clients are allowed to submit, 0 to disallow all string commands"); // https://blog.counter-strike.net/index.php/2019/07/24922/ but different because idk how to check what current tick number is - Cvar_net_chan_limit_mode = RegisterConVar("net_chan_limit_mode", "0", FCVAR_GAMEDLL, "The mode for netchan processing limits: 0 = none, 1 = kick, 2 = log"); + Cvar_net_chan_limit_mode = RegisterConVar("net_chan_limit_mode", "0", FCVAR_GAMEDLL, "The mode for netchan processing limits: 0 = log, 1 = kick"); Cvar_net_chan_limit_msec_per_sec = RegisterConVar("net_chan_limit_msec_per_sec", "0", FCVAR_GAMEDLL, "Netchannel processing is limited to so many milliseconds, abort connection if exceeding budget"); Cvar_ns_player_auth_port = RegisterConVar("ns_player_auth_port", "8081", FCVAR_GAMEDLL, ""); Cvar_sv_querylimit_per_sec = RegisterConVar("sv_querylimit_per_sec", "15", FCVAR_GAMEDLL, ""); + Cvar_sv_max_chat_messages_per_sec = RegisterConVar("sv_max_chat_messages_per_sec", "5", FCVAR_GAMEDLL, ""); HookEnabler hook; ENABLER_CREATEHOOK(hook, (char*)baseAddress + 0x114430, &CBaseServer__ConnectClientHook, reinterpret_cast<LPVOID*>(&CBaseServer__ConnectClient)); @@ -492,4 +522,10 @@ void InitialiseServerAuthentication(HMODULE baseAddress) *((char*)ptr + 13) = (char)0x90; *((char*)ptr + 14) = (char)0x90; } +} + +void InitialiseServerAuthenticationServerDLL(HMODULE baseAddress) +{ + HookEnabler hook; + ENABLER_CREATEHOOK(hook, (char*)baseAddress + 0x1595C0, &CServerGameDLL__OnRecievedSayTextMessageHook, reinterpret_cast<LPVOID*>(&CServerGameDLL__OnRecievedSayTextMessage)); }
\ No newline at end of file diff --git a/NorthstarDedicatedTest/serverauthentication.h b/NorthstarDedicatedTest/serverauthentication.h index a8863b2f..6702eb3d 100644 --- a/NorthstarDedicatedTest/serverauthentication.h +++ b/NorthstarDedicatedTest/serverauthentication.h @@ -23,7 +23,10 @@ struct AdditionalPlayerData int numClientCommandsInQuota = 0; double lastNetChanProcessingLimitStart = -1.0; - double netChanProcessingLimitTime = 0; + double netChanProcessingLimitTime = 0.0; + + double lastSayTextLimitStart = -1.0; + int sayTextLimitCount = 0; }; #pragma once @@ -94,7 +97,11 @@ public: void WritePersistentData(void* player); }; +typedef void(*CBaseClient__DisconnectType)(void* self, uint32_t unknownButAlways1, const char* reason, ...); +extern CBaseClient__DisconnectType CBaseClient__Disconnect; + void InitialiseServerAuthentication(HMODULE baseAddress); +void InitialiseServerAuthenticationServerDLL(HMODULE baseAddress); extern ServerAuthenticationManager* g_ServerAuthenticationManager; extern ConVar* Cvar_ns_player_auth_port;
\ No newline at end of file diff --git a/R2Northstar.sln b/R2Northstar.sln index 1b664dd9..3dfdb218 100644 --- a/R2Northstar.sln +++ b/R2Northstar.sln @@ -1,35 +1,38 @@ Microsoft Visual Studio Solution File, Format Version 12.00 -# Visual Studio Version 16 -VisualStudioVersion = 16.0.30621.155 +# Visual Studio Version 17 +VisualStudioVersion = 17.0.32014.148 MinimumVisualStudioVersion = 10.0.40219.1 Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "Northstar", "NorthstarDedicatedTest\NorthstarDedicatedTest.vcxproj", "{CFAD2623-064F-453C-8196-79EE10292E32}" EndProject Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "NorthstarLauncher", "LauncherInjector\LauncherInjector.vcxproj", "{0EA82CB0-53FE-4D4C-96DF-47FA970513D0}" EndProject +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "loader_launcher_proxy", "loader_launcher_proxy\loader_launcher_proxy.vcxproj", "{F65C322D-66DF-4AF1-B650-70221DE334C0}" +EndProject +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "loader_wsock32_proxy", "loader_wsock32_proxy\loader_wsock32_proxy.vcxproj", "{CF55F3B5-F348-450A-9CCB-C269F21D629D}" +EndProject Global GlobalSection(SolutionConfigurationPlatforms) = preSolution Debug|x64 = Debug|x64 - Debug|x86 = Debug|x86 Release|x64 = Release|x64 - Release|x86 = Release|x86 EndGlobalSection GlobalSection(ProjectConfigurationPlatforms) = postSolution {CFAD2623-064F-453C-8196-79EE10292E32}.Debug|x64.ActiveCfg = Debug|x64 {CFAD2623-064F-453C-8196-79EE10292E32}.Debug|x64.Build.0 = Debug|x64 - {CFAD2623-064F-453C-8196-79EE10292E32}.Debug|x86.ActiveCfg = Debug|Win32 {CFAD2623-064F-453C-8196-79EE10292E32}.Release|x64.ActiveCfg = Release|x64 {CFAD2623-064F-453C-8196-79EE10292E32}.Release|x64.Build.0 = Release|x64 - {CFAD2623-064F-453C-8196-79EE10292E32}.Release|x86.ActiveCfg = Release|Win32 - {CFAD2623-064F-453C-8196-79EE10292E32}.Release|x86.Build.0 = Release|Win32 {0EA82CB0-53FE-4D4C-96DF-47FA970513D0}.Debug|x64.ActiveCfg = Debug|x64 {0EA82CB0-53FE-4D4C-96DF-47FA970513D0}.Debug|x64.Build.0 = Debug|x64 - {0EA82CB0-53FE-4D4C-96DF-47FA970513D0}.Debug|x86.ActiveCfg = Debug|Win32 - {0EA82CB0-53FE-4D4C-96DF-47FA970513D0}.Debug|x86.Build.0 = Debug|Win32 {0EA82CB0-53FE-4D4C-96DF-47FA970513D0}.Release|x64.ActiveCfg = Release|x64 {0EA82CB0-53FE-4D4C-96DF-47FA970513D0}.Release|x64.Build.0 = Release|x64 - {0EA82CB0-53FE-4D4C-96DF-47FA970513D0}.Release|x86.ActiveCfg = Release|Win32 - {0EA82CB0-53FE-4D4C-96DF-47FA970513D0}.Release|x86.Build.0 = Release|Win32 + {F65C322D-66DF-4AF1-B650-70221DE334C0}.Debug|x64.ActiveCfg = Debug|x64 + {F65C322D-66DF-4AF1-B650-70221DE334C0}.Debug|x64.Build.0 = Debug|x64 + {F65C322D-66DF-4AF1-B650-70221DE334C0}.Release|x64.ActiveCfg = Release|x64 + {F65C322D-66DF-4AF1-B650-70221DE334C0}.Release|x64.Build.0 = Release|x64 + {CF55F3B5-F348-450A-9CCB-C269F21D629D}.Debug|x64.ActiveCfg = Debug|x64 + {CF55F3B5-F348-450A-9CCB-C269F21D629D}.Debug|x64.Build.0 = Debug|x64 + {CF55F3B5-F348-450A-9CCB-C269F21D629D}.Release|x64.ActiveCfg = Release|x64 + {CF55F3B5-F348-450A-9CCB-C269F21D629D}.Release|x64.Build.0 = Release|x64 EndGlobalSection GlobalSection(SolutionProperties) = preSolution HideSolutionNode = FALSE diff --git a/loader_launcher_proxy/Memory.cpp b/loader_launcher_proxy/Memory.cpp new file mode 100644 index 00000000..f00c4d96 --- /dev/null +++ b/loader_launcher_proxy/Memory.cpp @@ -0,0 +1,84 @@ +#include "pch.h" + +extern HMODULE hTier0Module; +IMemAlloc** g_ppMemAllocSingleton; + +void LoadTier0Handle() +{ + if (!hTier0Module) hTier0Module = GetModuleHandleA("tier0.dll"); + if (!hTier0Module) return; + + g_ppMemAllocSingleton = (IMemAlloc**)GetProcAddress(hTier0Module, "g_pMemAllocSingleton"); +} + +const int STATIC_ALLOC_SIZE = 4096; + +size_t g_iStaticAllocated = 0; +void* g_pLastAllocated = nullptr; +char pStaticAllocBuf[STATIC_ALLOC_SIZE]; + +// they should never be used here, except in LibraryLoadError? + +void* malloc(size_t n) +{ + // allocate into static buffer + if (g_iStaticAllocated + n <= STATIC_ALLOC_SIZE) + { + void* ret = pStaticAllocBuf + g_iStaticAllocated; + g_iStaticAllocated += n; + return ret; + } + else + { + // try to fallback to g_pMemAllocSingleton + if (!hTier0Module || !g_ppMemAllocSingleton) LoadTier0Handle(); + if (g_ppMemAllocSingleton && *g_ppMemAllocSingleton) + return (*g_ppMemAllocSingleton)->m_vtable->Alloc(*g_ppMemAllocSingleton, n); + else + throw "Cannot allocate"; + } +} + +void free(void* p) +{ + // if it was allocated into the static buffer, just do nothing, safest way to deal with it + if (p >= pStaticAllocBuf && p <= pStaticAllocBuf + STATIC_ALLOC_SIZE) + return; + + if (g_ppMemAllocSingleton && *g_ppMemAllocSingleton) + (*g_ppMemAllocSingleton)->m_vtable->Free(*g_ppMemAllocSingleton, p); +} + +void* realloc(void* old_ptr, size_t size) { + // it was allocated into the static buffer + if (old_ptr >= pStaticAllocBuf && old_ptr <= pStaticAllocBuf + STATIC_ALLOC_SIZE) + { + if (g_pLastAllocated == old_ptr) + { + // nothing was allocated after this + size_t old_size = g_iStaticAllocated - ((size_t)g_pLastAllocated - (size_t)pStaticAllocBuf); + size_t diff = size - old_size; + if (diff > 0) + g_iStaticAllocated += diff; + return old_ptr; + } + else + { + return malloc(size); + } + } + + if (g_ppMemAllocSingleton && *g_ppMemAllocSingleton) + return (*g_ppMemAllocSingleton)->m_vtable->Realloc(*g_ppMemAllocSingleton, old_ptr, size); + return nullptr; +} + +void* operator new(size_t n) +{ + return malloc(n); +} + +void operator delete(void* p) +{ + return free(p); +} diff --git a/loader_launcher_proxy/Memory.h b/loader_launcher_proxy/Memory.h new file mode 100644 index 00000000..c983966c --- /dev/null +++ b/loader_launcher_proxy/Memory.h @@ -0,0 +1,24 @@ +#pragma once + +class IMemAlloc +{ +public: + struct VTable + { + void* unknown[1]; // alloc debug + void* (*Alloc) (IMemAlloc* memAlloc, size_t nSize); + void* unknown2[1]; // realloc debug + void* (*Realloc)(IMemAlloc* memAlloc, void* pMem, size_t nSize); + void* unknown3[1]; // free #1 + void (*Free) (IMemAlloc* memAlloc, void* pMem); + void* unknown4[2]; // nullsubs, maybe CrtSetDbgFlag + size_t(*GetSize) (IMemAlloc* memAlloc, void* pMem); + void* unknown5[9]; // they all do literally nothing + void (*DumpStats) (IMemAlloc* memAlloc); + void (*DumpStatsFileBase) (IMemAlloc* memAlloc, const char* pchFileBase); + void* unknown6[4]; + int (*heapchk) (IMemAlloc* memAlloc); + }; + + VTable* m_vtable; +}; diff --git a/loader_launcher_proxy/dllmain.cpp b/loader_launcher_proxy/dllmain.cpp new file mode 100644 index 00000000..cf69d63e --- /dev/null +++ b/loader_launcher_proxy/dllmain.cpp @@ -0,0 +1,156 @@ +#include "pch.h" +#include <stdio.h> +#include <string> +#include <system_error> +#include <Shlwapi.h> +#include <sstream> +#include <fstream> + +HMODULE hLauncherModule; +HMODULE hHookModule; +HMODULE hTier0Module; + +using CreateInterfaceFn = void* (*)(const char* pName, int* pReturnCode); + +// does not seem to ever be used +extern "C" _declspec(dllexport) void* __fastcall CreateInterface(const char* pName, int* pReturnCode) +{ + //AppSystemCreateInterfaceFn(pName, pReturnCode); + printf("external CreateInterface: name: %s\n", pName); + + static CreateInterfaceFn launcher_CreateInterface = (CreateInterfaceFn)GetProcAddress(hLauncherModule, "CreateInterface"); + auto res = launcher_CreateInterface(pName, pReturnCode); + + printf("external CreateInterface: return code: %p\n", res); + return res; +} + +bool GetExePathWide(wchar_t* dest, DWORD destSize) +{ + if (!dest) return NULL; + if (destSize < MAX_PATH) return NULL; + + DWORD length = GetModuleFileNameW(NULL, dest, destSize); + return length && PathRemoveFileSpecW(dest); +} + +FARPROC GetLauncherMain() +{ + static FARPROC Launcher_LauncherMain; + if (!Launcher_LauncherMain) + Launcher_LauncherMain = GetProcAddress(hLauncherModule, "LauncherMain"); + return Launcher_LauncherMain; +} + +void LibraryLoadError(DWORD dwMessageId, const wchar_t* libName, const wchar_t* location) +{ + char text[2048]; + std::string message = std::system_category().message(dwMessageId); + sprintf_s(text, "Failed to load the %ls at \"%ls\" (%lu):\n\n%hs", libName, location, dwMessageId, message.c_str()); + MessageBoxA(GetForegroundWindow(), text, "Northstar Launcher Proxy Error", 0); +} + +BOOL APIENTRY DllMain( HMODULE hModule, + DWORD ul_reason_for_call, + LPVOID lpReserved + ) +{ + switch (ul_reason_for_call) + { + case DLL_PROCESS_ATTACH: + case DLL_THREAD_ATTACH: + case DLL_THREAD_DETACH: + case DLL_PROCESS_DETACH: + break; + } + return TRUE; +} + +wchar_t exePath[4096]; +wchar_t dllPath[4096]; + +bool ShouldLoadNorthstar() +{ + bool loadNorthstar = !strstr(GetCommandLineA(), "-vanilla"); + + if (!loadNorthstar) + return loadNorthstar; + + auto runNorthstarFile = std::ifstream("run_northstar.txt"); + if (runNorthstarFile) + { + std::stringstream runNorthstarFileBuffer; + runNorthstarFileBuffer << runNorthstarFile.rdbuf(); + runNorthstarFile.close(); + if (runNorthstarFileBuffer.str()._Starts_with("0")) + loadNorthstar = false; + } + return loadNorthstar; +} + +bool LoadNorthstar() +{ + FARPROC Hook_Init = nullptr; + { + swprintf_s(dllPath, L"%s\\Northstar.dll", exePath); + hHookModule = LoadLibraryExW(dllPath, 0, LOAD_WITH_ALTERED_SEARCH_PATH); + if (hHookModule) Hook_Init = GetProcAddress(hHookModule, "InitialiseNorthstar"); + if (!hHookModule || Hook_Init == nullptr) + { + LibraryLoadError(GetLastError(), L"Northstar.dll", dllPath); + return false; + } + } + + ((bool (*)()) Hook_Init)(); + return true; +} + +extern "C" __declspec(dllexport) int LauncherMain(HINSTANCE hInstance, HINSTANCE hPrevInstance, LPSTR lpCmdLine, int nCmdShow) +{ + { + if (!GetExePathWide(exePath, 4096)) + { + MessageBoxA(GetForegroundWindow(), "Failed getting game directory.\nThe game cannot continue and has to exit.", "Northstar Launcher Proxy Error", 0); + return 1; + } + + bool loadNorthstar = ShouldLoadNorthstar(); + + if (loadNorthstar) + { + swprintf_s(dllPath, L"%s\\bin\\x64_retail\\tier0.dll", exePath); + hTier0Module = LoadLibraryExW(dllPath, 0, LOAD_WITH_ALTERED_SEARCH_PATH); + if (!hTier0Module) + { + LibraryLoadError(GetLastError(), L"tier0.dll", dllPath); + return 1; + } + + if (!LoadNorthstar()) + return 1; + } + //else printf("\n\n WILL !!!NOT!!! LOAD NORTHSTAR\n\n"); + + swprintf_s(dllPath, L"%s\\bin\\x64_retail\\launcher.org.dll", exePath); + hLauncherModule = LoadLibraryExW(dllPath, 0, LOAD_WITH_ALTERED_SEARCH_PATH); + if (!hLauncherModule) + { + LibraryLoadError(GetLastError(), L"launcher.org.dll", dllPath); + return 1; + } + } + + auto LauncherMain = GetLauncherMain(); + if (!LauncherMain) + MessageBoxA(GetForegroundWindow(), "Failed loading launcher.org.dll.\nThe game cannot continue and has to exit.", "Northstar Launcher Proxy Error", 0); + //auto result = ((__int64(__fastcall*)())LauncherMain)(); + //auto result = ((signed __int64(__fastcall*)(__int64))LauncherMain)(0i64); + return ((int(__fastcall*)(HINSTANCE, HINSTANCE, LPSTR, int))LauncherMain)(hInstance, hPrevInstance, lpCmdLine, nCmdShow); +} + +// doubt that will help us here (in launcher.dll) though +extern "C" { + __declspec(dllexport) DWORD AmdPowerXpressRequestHighPerformance = 0x00000001; + __declspec(dllexport) DWORD NvOptimusEnablement = 0x00000001; +} diff --git a/loader_launcher_proxy/framework.h b/loader_launcher_proxy/framework.h new file mode 100644 index 00000000..d1b49600 --- /dev/null +++ b/loader_launcher_proxy/framework.h @@ -0,0 +1,7 @@ +#pragma once + +#define WIN32_LEAN_AND_MEAN // Exclude rarely-used stuff from Windows headers +#define WIN32_EXTRA_LEAN +#define VC_EXTRALEAN +// Windows Header Files +#include <Windows.h> diff --git a/loader_launcher_proxy/loader_launcher_proxy.vcxproj b/loader_launcher_proxy/loader_launcher_proxy.vcxproj new file mode 100644 index 00000000..24cdabc0 --- /dev/null +++ b/loader_launcher_proxy/loader_launcher_proxy.vcxproj @@ -0,0 +1,107 @@ +<?xml version="1.0" encoding="utf-8"?> +<Project DefaultTargets="Build" xmlns="http://schemas.microsoft.com/developer/msbuild/2003"> + <ItemGroup Label="ProjectConfigurations"> + <ProjectConfiguration Include="Debug|x64"> + <Configuration>Debug</Configuration> + <Platform>x64</Platform> + </ProjectConfiguration> + <ProjectConfiguration Include="Release|x64"> + <Configuration>Release</Configuration> + <Platform>x64</Platform> + </ProjectConfiguration> + </ItemGroup> + <PropertyGroup Label="Globals"> + <VCProjectVersion>16.0</VCProjectVersion> + <Keyword>Win32Proj</Keyword> + <ProjectGuid>{f65c322d-66df-4af1-b650-70221de334c0}</ProjectGuid> + <RootNamespace>loaderlauncherproxy</RootNamespace> + <WindowsTargetPlatformVersion>10.0</WindowsTargetPlatformVersion> + </PropertyGroup> + <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" /> + <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="Configuration"> + <ConfigurationType>DynamicLibrary</ConfigurationType> + <UseDebugLibraries>true</UseDebugLibraries> + <PlatformToolset>v143</PlatformToolset> + <CharacterSet>Unicode</CharacterSet> + </PropertyGroup> + <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="Configuration"> + <ConfigurationType>DynamicLibrary</ConfigurationType> + <UseDebugLibraries>false</UseDebugLibraries> + <PlatformToolset>v143</PlatformToolset> + <WholeProgramOptimization>true</WholeProgramOptimization> + <CharacterSet>Unicode</CharacterSet> + </PropertyGroup> + <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" /> + <ImportGroup Label="ExtensionSettings"> + </ImportGroup> + <ImportGroup Label="Shared"> + </ImportGroup> + <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Debug|x64'"> + <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" /> + </ImportGroup> + <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Release|x64'"> + <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" /> + </ImportGroup> + <PropertyGroup Label="UserMacros" /> + <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'"> + <LinkIncremental>true</LinkIncremental> + <TargetName>launcher</TargetName> + </PropertyGroup> + <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'"> + <LinkIncremental>false</LinkIncremental> + <TargetName>launcher</TargetName> + </PropertyGroup> + <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'"> + <ClCompile> + <WarningLevel>Level3</WarningLevel> + <SDLCheck>true</SDLCheck> + <PreprocessorDefinitions>_DEBUG;LOADERLAUNCHERPROXY_EXPORTS;_WINDOWS;_USRDLL;%(PreprocessorDefinitions)</PreprocessorDefinitions> + <ConformanceMode>true</ConformanceMode> + <PrecompiledHeader>Use</PrecompiledHeader> + <PrecompiledHeaderFile>pch.h</PrecompiledHeaderFile> + <LanguageStandard>stdcpp17</LanguageStandard> + </ClCompile> + <Link> + <SubSystem>Windows</SubSystem> + <GenerateDebugInformation>true</GenerateDebugInformation> + <EnableUAC>false</EnableUAC> + <AdditionalDependencies>shlwapi.lib;kernel32.lib;user32.lib;gdi32.lib;winspool.lib;comdlg32.lib;advapi32.lib;shell32.lib;ole32.lib;oleaut32.lib;uuid.lib;odbc32.lib;odbccp32.lib;%(AdditionalDependencies)</AdditionalDependencies> + </Link> + </ItemDefinitionGroup> + <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'"> + <ClCompile> + <WarningLevel>Level3</WarningLevel> + <FunctionLevelLinking>true</FunctionLevelLinking> + <IntrinsicFunctions>true</IntrinsicFunctions> + <SDLCheck>true</SDLCheck> + <PreprocessorDefinitions>NDEBUG;LOADERLAUNCHERPROXY_EXPORTS;_WINDOWS;_USRDLL;%(PreprocessorDefinitions)</PreprocessorDefinitions> + <ConformanceMode>true</ConformanceMode> + <PrecompiledHeader>Use</PrecompiledHeader> + <PrecompiledHeaderFile>pch.h</PrecompiledHeaderFile> + <LanguageStandard>stdcpp17</LanguageStandard> + </ClCompile> + <Link> + <SubSystem>Windows</SubSystem> + <EnableCOMDATFolding>true</EnableCOMDATFolding> + <OptimizeReferences>true</OptimizeReferences> + <GenerateDebugInformation>true</GenerateDebugInformation> + <EnableUAC>false</EnableUAC> + <AdditionalOptions>/HIGHENTROPYVA:NO %(AdditionalOptions)</AdditionalOptions> + <AdditionalDependencies>shlwapi.lib;kernel32.lib;user32.lib;gdi32.lib;winspool.lib;comdlg32.lib;advapi32.lib;shell32.lib;ole32.lib;oleaut32.lib;uuid.lib;odbc32.lib;odbccp32.lib;%(AdditionalDependencies)</AdditionalDependencies> + </Link> + </ItemDefinitionGroup> + <ItemGroup> + <ClInclude Include="framework.h" /> + <ClInclude Include="pch.h" /> + </ItemGroup> + <ItemGroup> + <ClCompile Include="dllmain.cpp" /> + <ClCompile Include="pch.cpp"> + <PrecompiledHeader Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">Create</PrecompiledHeader> + <PrecompiledHeader Condition="'$(Configuration)|$(Platform)'=='Release|x64'">Create</PrecompiledHeader> + </ClCompile> + </ItemGroup> + <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" /> + <ImportGroup Label="ExtensionTargets"> + </ImportGroup> +</Project>
\ No newline at end of file diff --git a/loader_launcher_proxy/loader_launcher_proxy.vcxproj.filters b/loader_launcher_proxy/loader_launcher_proxy.vcxproj.filters new file mode 100644 index 00000000..1e57c7b1 --- /dev/null +++ b/loader_launcher_proxy/loader_launcher_proxy.vcxproj.filters @@ -0,0 +1,33 @@ +<?xml version="1.0" encoding="utf-8"?> +<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003"> + <ItemGroup> + <Filter Include="Source Files"> + <UniqueIdentifier>{4FC737F1-C7A5-4376-A066-2A32D752A2FF}</UniqueIdentifier> + <Extensions>cpp;c;cc;cxx;c++;cppm;ixx;def;odl;idl;hpj;bat;asm;asmx</Extensions> + </Filter> + <Filter Include="Header Files"> + <UniqueIdentifier>{93995380-89BD-4b04-88EB-625FBE52EBFB}</UniqueIdentifier> + <Extensions>h;hh;hpp;hxx;h++;hm;inl;inc;ipp;xsd</Extensions> + </Filter> + <Filter Include="Resource Files"> + <UniqueIdentifier>{67DA6AB6-F800-4c08-8B7A-83BB121AAD01}</UniqueIdentifier> + <Extensions>rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe;resx;tiff;tif;png;wav;mfcribbon-ms</Extensions> + </Filter> + </ItemGroup> + <ItemGroup> + <ClInclude Include="framework.h"> + <Filter>Header Files</Filter> + </ClInclude> + <ClInclude Include="pch.h"> + <Filter>Header Files</Filter> + </ClInclude> + </ItemGroup> + <ItemGroup> + <ClCompile Include="dllmain.cpp"> + <Filter>Source Files</Filter> + </ClCompile> + <ClCompile Include="pch.cpp"> + <Filter>Source Files</Filter> + </ClCompile> + </ItemGroup> +</Project>
\ No newline at end of file diff --git a/loader_launcher_proxy/pch.cpp b/loader_launcher_proxy/pch.cpp new file mode 100644 index 00000000..64b7eef6 --- /dev/null +++ b/loader_launcher_proxy/pch.cpp @@ -0,0 +1,5 @@ +// pch.cpp: source file corresponding to the pre-compiled header + +#include "pch.h" + +// When you are using pre-compiled headers, this source file is necessary for compilation to succeed. diff --git a/loader_launcher_proxy/pch.h b/loader_launcher_proxy/pch.h new file mode 100644 index 00000000..885d5d62 --- /dev/null +++ b/loader_launcher_proxy/pch.h @@ -0,0 +1,13 @@ +// pch.h: This is a precompiled header file. +// Files listed below are compiled only once, improving build performance for future builds. +// This also affects IntelliSense performance, including code completion and many code browsing features. +// However, files listed here are ALL re-compiled if any one of them is updated between builds. +// Do not add files here that you will be updating frequently as this negates the performance advantage. + +#ifndef PCH_H +#define PCH_H + +// add headers that you want to pre-compile here +#include "framework.h" + +#endif //PCH_H diff --git a/loader_wsock32_proxy/dllmain.cpp b/loader_wsock32_proxy/dllmain.cpp new file mode 100644 index 00000000..0b518dbe --- /dev/null +++ b/loader_wsock32_proxy/dllmain.cpp @@ -0,0 +1,137 @@ +#include "pch.h" +#include "loader.h" + +#include <Shlwapi.h> +#include <filesystem> + +HINSTANCE hLThis = 0; +FARPROC p[857]; +HINSTANCE hL = 0; + +bool GetExePathWide(wchar_t* dest, DWORD destSize) +{ + if (!dest) return NULL; + if (destSize < MAX_PATH) return NULL; + + DWORD length = GetModuleFileNameW(NULL, dest, destSize); + return length && PathRemoveFileSpecW(dest); +} + +wchar_t exePath[4096]; +wchar_t dllPath[8192]; +wchar_t dllPath2[4096]; + +BOOL WINAPI DllMain(HINSTANCE hInst, DWORD reason, LPVOID) +{ + if (reason == DLL_PROCESS_ATTACH) + { + hLThis = hInst; + + if (!GetExePathWide(exePath, 4096)) + { + MessageBoxA(GetForegroundWindow(), "Failed getting game directory.\nThe game cannot continue and has to exit.", "Northstar Wsock32 Proxy Error", 0); + return 1; + } + + if (!ProvisionNorthstar()) // does not call InitialiseNorthstar yet, will do it on LauncherMain hook + return 1; + + // copy the original library for system to our local directory, with changed name so that we can load it + swprintf_s(dllPath, L"%s\\bin\\x64_retail\\wsock32.org.dll", exePath); + GetSystemDirectoryW(dllPath2, 4096); + swprintf_s(dllPath2, L"%s\\wsock32.dll", dllPath2); + try + { + std::filesystem::copy_file(dllPath2, dllPath); + } + catch (const std::exception& e) + { + if (!std::filesystem::exists(dllPath)) + { + swprintf_s(dllPath, L"Failed copying wsock32.dll from system32 to \"%s\"\n\n%S", dllPath, e.what()); + MessageBoxW(GetForegroundWindow(), dllPath, L"Northstar Wsock32 Proxy Error", 0); + } + } + hL = LoadLibraryExW(dllPath, 0, LOAD_WITH_ALTERED_SEARCH_PATH); + if (!hL) return false; + + // load the functions to proxy + // it's only some of them, because in case of wsock32 most of the functions can actually be natively redirected + // (see wsock32.def and https://source.winehq.org/WineAPI/wsock32.html) + p[1] = GetProcAddress(hL, "EnumProtocolsA"); + p[2] = GetProcAddress(hL, "EnumProtocolsW"); + p[4] = GetProcAddress(hL, "GetAddressByNameA"); + p[5] = GetProcAddress(hL, "GetAddressByNameW"); + p[17] = GetProcAddress(hL, "WEP"); + p[30] = GetProcAddress(hL, "WSARecvEx"); + p[36] = GetProcAddress(hL, "__WSAFDIsSet"); + p[45] = GetProcAddress(hL, "getnetbyname"); + p[52] = GetProcAddress(hL, "getsockopt"); + p[56] = GetProcAddress(hL, "inet_network"); + p[67] = GetProcAddress(hL, "s_perror"); + p[72] = GetProcAddress(hL, "setsockopt"); + } + + if (reason == DLL_PROCESS_DETACH) + { + FreeLibrary(hL); + return 1; + } + + return 1; +} + +extern "C" +{ + FARPROC PA = NULL; + int RunASM(); + + void PROXY_EnumProtocolsA() { + PA = p[1]; + RunASM(); + } + void PROXY_EnumProtocolsW() { + PA = p[2]; + RunASM(); + } + void PROXY_GetAddressByNameA() { + PA = p[4]; + RunASM(); + } + void PROXY_GetAddressByNameW() { + PA = p[5]; + RunASM(); + } + void PROXY_WEP() { + PA = p[17]; + RunASM(); + } + void PROXY_WSARecvEx() { + PA = p[30]; + RunASM(); + } + void PROXY___WSAFDIsSet() { + PA = p[36]; + RunASM(); + } + void PROXY_getnetbyname() { + PA = p[45]; + RunASM(); + } + void PROXY_getsockopt() { + PA = p[52]; + RunASM(); + } + void PROXY_inet_network() { + PA = p[56]; + RunASM(); + } + void PROXY_s_perror() { + PA = p[67]; + RunASM(); + } + void PROXY_setsockopt() { + PA = p[72]; + RunASM(); + } +}
\ No newline at end of file diff --git a/loader_wsock32_proxy/hookutils.cpp b/loader_wsock32_proxy/hookutils.cpp new file mode 100644 index 00000000..8603cb35 --- /dev/null +++ b/loader_wsock32_proxy/hookutils.cpp @@ -0,0 +1,71 @@ +#include "pch.h" +#include "../NorthstarDedicatedTest/hookutils.h" + +#define ERROR(...) { char err[2048]; sprintf_s(err, __VA_ARGS__); MessageBoxA(GetForegroundWindow(), err, "Northstar Wsock32 Proxy Error", 0); } + +TempReadWrite::TempReadWrite(void* ptr) +{ + m_ptr = ptr; + MEMORY_BASIC_INFORMATION mbi; + VirtualQuery(m_ptr, &mbi, sizeof(mbi)); + VirtualProtect(mbi.BaseAddress, mbi.RegionSize, PAGE_EXECUTE_READWRITE, &mbi.Protect); + m_origProtection = mbi.Protect; +} + +TempReadWrite::~TempReadWrite() +{ + MEMORY_BASIC_INFORMATION mbi; + VirtualQuery(m_ptr, &mbi, sizeof(mbi)); + VirtualProtect(mbi.BaseAddress, mbi.RegionSize, m_origProtection, &mbi.Protect); +} + + +void HookEnabler::CreateHook(LPVOID ppTarget, LPVOID ppDetour, LPVOID* ppOriginal, const char* targetName) +{ + // the macro for this uses ppTarget's name as targetName, and this typically starts with & + // targetname is used for debug stuff and debug output is nicer if we don't have this + if (*targetName == '&') + targetName++; + + if (MH_CreateHook(ppTarget, ppDetour, ppOriginal) == MH_OK) + { + HookTarget* target = new HookTarget; + target->targetAddress = ppTarget; + target->targetName = (char*)targetName; + + m_hookTargets.push_back(target); + } + else + { + if (targetName != nullptr) + { + ERROR("MH_CreateHook failed for function %s", targetName); + } + else + { + ERROR("MH_CreateHook failed for unknown function"); + } + } +} + +HookEnabler::~HookEnabler() +{ + for (auto& hook : m_hookTargets) + { + if (MH_EnableHook(hook->targetAddress) != MH_OK) + { + if (hook->targetName != nullptr) + { + ERROR("MH_EnableHook failed for function %s", hook->targetName); + } + else + { + ERROR("MH_EnableHook failed for unknown function"); + } + } + else + { + //ERROR("Enabling hook %s", hook->targetName); + } + } +}
\ No newline at end of file diff --git a/loader_wsock32_proxy/loader.cpp b/loader_wsock32_proxy/loader.cpp new file mode 100644 index 00000000..907caa9d --- /dev/null +++ b/loader_wsock32_proxy/loader.cpp @@ -0,0 +1,86 @@ +#include "pch.h" +#include "loader.h" +#include "../NorthstarDedicatedTest/hookutils.h" +#include <string> +#include <system_error> +#include <sstream> +#include <fstream> + +void LibraryLoadError(DWORD dwMessageId, const wchar_t* libName, const wchar_t* location) +{ + char text[2048]; + std::string message = std::system_category().message(dwMessageId); + sprintf_s(text, "Failed to load the %ls at \"%ls\" (%lu):\n\n%hs", libName, location, dwMessageId, message.c_str()); + MessageBoxA(GetForegroundWindow(), text, "Northstar Wsock32 Proxy Error", 0); +} + +bool ShouldLoadNorthstar() +{ + bool loadNorthstar = strstr(GetCommandLineA(), "-northstar"); + + if (loadNorthstar) + return loadNorthstar; + + auto runNorthstarFile = std::ifstream("run_northstar.txt"); + if (runNorthstarFile) + { + std::stringstream runNorthstarFileBuffer; + runNorthstarFileBuffer << runNorthstarFile.rdbuf(); + runNorthstarFile.close(); + if (!runNorthstarFileBuffer.str()._Starts_with("0")) + loadNorthstar = true; + } + return loadNorthstar; +} + +bool LoadNorthstar() +{ + FARPROC Hook_Init = nullptr; + { + swprintf_s(dllPath, L"%s\\Northstar.dll", exePath); + auto hHookModule = LoadLibraryExW(dllPath, 0, LOAD_WITH_ALTERED_SEARCH_PATH); + if (hHookModule) Hook_Init = GetProcAddress(hHookModule, "InitialiseNorthstar"); + if (!hHookModule || Hook_Init == nullptr) + { + LibraryLoadError(GetLastError(), L"Northstar.dll", dllPath); + return false; + } + } + + ((bool (*)()) Hook_Init)(); + return true; +} + +typedef int(*LauncherMainType)(HINSTANCE hInstance, HINSTANCE hPrevInstance, LPSTR lpCmdLine, int nCmdShow); +LauncherMainType LauncherMainOriginal; + +int LauncherMainHook(HINSTANCE hInstance, HINSTANCE hPrevInstance, LPSTR lpCmdLine, int nCmdShow) +{ + if (ShouldLoadNorthstar()) + LoadNorthstar(); + return LauncherMainOriginal(hInstance, hPrevInstance, lpCmdLine, nCmdShow); +} + +bool ProvisionNorthstar() +{ + if (!ShouldLoadNorthstar()) + return true; + + if (MH_Initialize() != MH_OK) + { + MessageBoxA(GetForegroundWindow(), "MH_Initialize failed\nThe game cannot continue and has to exit.", "Northstar Wsock32 Proxy Error", 0); + return false; + } + + auto launcherHandle = GetModuleHandleA("launcher.dll"); + if (!launcherHandle) + { + MessageBoxA(GetForegroundWindow(), "Launcher isn't loaded yet.\nThe game cannot continue and has to exit.", "Northstar Wsock32 Proxy Error", 0); + return false; + } + + HookEnabler hook; + ENABLER_CREATEHOOK(hook, GetProcAddress(launcherHandle, "LauncherMain"), &LauncherMainHook, reinterpret_cast<LPVOID*>(&LauncherMainOriginal)); + + return true; +}
\ No newline at end of file diff --git a/loader_wsock32_proxy/loader.h b/loader_wsock32_proxy/loader.h new file mode 100644 index 00000000..9a14b2e7 --- /dev/null +++ b/loader_wsock32_proxy/loader.h @@ -0,0 +1,8 @@ +#pragma once + +extern wchar_t exePath[4096]; +extern wchar_t dllPath[8192]; +extern wchar_t dllPath2[4096]; + +bool ShouldLoadNorthstar(); +bool ProvisionNorthstar(); diff --git a/loader_wsock32_proxy/loader_wsock32_proxy.vcxproj b/loader_wsock32_proxy/loader_wsock32_proxy.vcxproj new file mode 100644 index 00000000..9866d368 --- /dev/null +++ b/loader_wsock32_proxy/loader_wsock32_proxy.vcxproj @@ -0,0 +1,120 @@ +<?xml version="1.0" encoding="utf-8"?> +<Project DefaultTargets="Build" xmlns="http://schemas.microsoft.com/developer/msbuild/2003"> + <ItemGroup Label="ProjectConfigurations"> + <ProjectConfiguration Include="Debug|x64"> + <Configuration>Debug</Configuration> + <Platform>x64</Platform> + </ProjectConfiguration> + <ProjectConfiguration Include="Release|x64"> + <Configuration>Release</Configuration> + <Platform>x64</Platform> + </ProjectConfiguration> + </ItemGroup> + <PropertyGroup Label="Globals"> + <VCProjectVersion>16.0</VCProjectVersion> + <Keyword>Win32Proj</Keyword> + <ProjectGuid>{cf55f3b5-f348-450a-9ccb-c269f21d629d}</ProjectGuid> + <RootNamespace>loaderwsock32proxy</RootNamespace> + <WindowsTargetPlatformVersion>10.0</WindowsTargetPlatformVersion> + </PropertyGroup> + <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" /> + <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="Configuration"> + <ConfigurationType>DynamicLibrary</ConfigurationType> + <UseDebugLibraries>true</UseDebugLibraries> + <PlatformToolset>v143</PlatformToolset> + <CharacterSet>Unicode</CharacterSet> + </PropertyGroup> + <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="Configuration"> + <ConfigurationType>DynamicLibrary</ConfigurationType> + <UseDebugLibraries>false</UseDebugLibraries> + <PlatformToolset>v143</PlatformToolset> + <WholeProgramOptimization>true</WholeProgramOptimization> + <CharacterSet>Unicode</CharacterSet> + </PropertyGroup> + <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" /> + <ImportGroup Label="ExtensionSettings"> + <Import Project="$(VCTargetsPath)\BuildCustomizations\masm.props" /> + </ImportGroup> + <ImportGroup Label="Shared"> + </ImportGroup> + <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Debug|x64'"> + <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" /> + </ImportGroup> + <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Release|x64'"> + <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" /> + </ImportGroup> + <PropertyGroup Label="UserMacros" /> + <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'"> + <LinkIncremental>true</LinkIncremental> + <TargetName>wsock32</TargetName> + </PropertyGroup> + <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'"> + <LinkIncremental>false</LinkIncremental> + <TargetName>wsock32</TargetName> + </PropertyGroup> + <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'"> + <ClCompile> + <WarningLevel>Level3</WarningLevel> + <SDLCheck>true</SDLCheck> + <PreprocessorDefinitions>_DEBUG;LOADERWSOCK32PROXY_EXPORTS;_WINDOWS;_USRDLL;%(PreprocessorDefinitions)</PreprocessorDefinitions> + <ConformanceMode>true</ConformanceMode> + <PrecompiledHeader>Use</PrecompiledHeader> + <PrecompiledHeaderFile>pch.h</PrecompiledHeaderFile> + <LanguageStandard>stdcpp17</LanguageStandard> + <AdditionalIncludeDirectories>..\NorthstarDedicatedTest\</AdditionalIncludeDirectories> + </ClCompile> + <Link> + <SubSystem>Windows</SubSystem> + <GenerateDebugInformation>true</GenerateDebugInformation> + <EnableUAC>false</EnableUAC> + <ModuleDefinitionFile>wsock32.def</ModuleDefinitionFile> + <AdditionalDependencies>..\NorthstarDedicatedTest\include\MinHook.x64.lib;mswsock.lib;ws2_32.lib;Shlwapi.lib;imagehlp.lib;dbghelp.lib;kernel32.lib;user32.lib;gdi32.lib;winspool.lib;comdlg32.lib;advapi32.lib;shell32.lib;ole32.lib;oleaut32.lib;uuid.lib;odbc32.lib;odbccp32.lib;%(AdditionalDependencies)</AdditionalDependencies> + </Link> + </ItemDefinitionGroup> + <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'"> + <ClCompile> + <WarningLevel>Level3</WarningLevel> + <FunctionLevelLinking>true</FunctionLevelLinking> + <IntrinsicFunctions>true</IntrinsicFunctions> + <SDLCheck>true</SDLCheck> + <PreprocessorDefinitions>NDEBUG;LOADERWSOCK32PROXY_EXPORTS;_WINDOWS;_USRDLL;%(PreprocessorDefinitions)</PreprocessorDefinitions> + <ConformanceMode>true</ConformanceMode> + <PrecompiledHeader>Use</PrecompiledHeader> + <PrecompiledHeaderFile>pch.h</PrecompiledHeaderFile> + <AdditionalIncludeDirectories>..\NorthstarDedicatedTest\</AdditionalIncludeDirectories> + <LanguageStandard>stdcpp17</LanguageStandard> + </ClCompile> + <Link> + <SubSystem>Windows</SubSystem> + <EnableCOMDATFolding>true</EnableCOMDATFolding> + <OptimizeReferences>true</OptimizeReferences> + <GenerateDebugInformation>true</GenerateDebugInformation> + <EnableUAC>false</EnableUAC> + <ModuleDefinitionFile>wsock32.def</ModuleDefinitionFile> + <AdditionalDependencies>..\NorthstarDedicatedTest\include\MinHook.x64.lib;mswsock.lib;ws2_32.lib;Shlwapi.lib;imagehlp.lib;dbghelp.lib;kernel32.lib;user32.lib;gdi32.lib;winspool.lib;comdlg32.lib;wsock32.lib;shell32.lib;ole32.lib;oleaut32.lib;uuid.lib;odbc32.lib;odbccp32.lib;%(AdditionalDependencies)</AdditionalDependencies> + </Link> + </ItemDefinitionGroup> + <ItemGroup> + <ClInclude Include="loader.h" /> + <ClInclude Include="pch.h" /> + </ItemGroup> + <ItemGroup> + <ClCompile Include="dllmain.cpp" /> + <ClCompile Include="hookutils.cpp" /> + <ClCompile Include="loader.cpp" /> + <ClCompile Include="pch.cpp"> + <PrecompiledHeader Condition="'$(Configuration)|$(Platform)'=='Release|x64'">Create</PrecompiledHeader> + <PrecompiledHeader Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">Create</PrecompiledHeader> + </ClCompile> + </ItemGroup> + <ItemGroup> + <MASM Include="wsock32.asm" /> + </ItemGroup> + <ItemGroup> + <None Include="wsock32.def" /> + </ItemGroup> + <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" /> + <ImportGroup Label="ExtensionTargets"> + <Import Project="$(VCTargetsPath)\BuildCustomizations\masm.targets" /> + </ImportGroup> +</Project>
\ No newline at end of file diff --git a/loader_wsock32_proxy/loader_wsock32_proxy.vcxproj.filters b/loader_wsock32_proxy/loader_wsock32_proxy.vcxproj.filters new file mode 100644 index 00000000..6d131e5b --- /dev/null +++ b/loader_wsock32_proxy/loader_wsock32_proxy.vcxproj.filters @@ -0,0 +1,49 @@ +<?xml version="1.0" encoding="utf-8"?> +<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003"> + <ItemGroup> + <Filter Include="Source Files"> + <UniqueIdentifier>{4FC737F1-C7A5-4376-A066-2A32D752A2FF}</UniqueIdentifier> + <Extensions>cpp;c;cc;cxx;c++;cppm;ixx;def;odl;idl;hpj;bat;asm;asmx</Extensions> + </Filter> + <Filter Include="Header Files"> + <UniqueIdentifier>{93995380-89BD-4b04-88EB-625FBE52EBFB}</UniqueIdentifier> + <Extensions>h;hh;hpp;hxx;h++;hm;inl;inc;ipp;xsd</Extensions> + </Filter> + <Filter Include="Resource Files"> + <UniqueIdentifier>{67DA6AB6-F800-4c08-8B7A-83BB121AAD01}</UniqueIdentifier> + <Extensions>rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe;resx;tiff;tif;png;wav;mfcribbon-ms</Extensions> + </Filter> + </ItemGroup> + <ItemGroup> + <ClInclude Include="pch.h"> + <Filter>Header Files</Filter> + </ClInclude> + <ClInclude Include="loader.h"> + <Filter>Header Files</Filter> + </ClInclude> + </ItemGroup> + <ItemGroup> + <ClCompile Include="dllmain.cpp"> + <Filter>Source Files</Filter> + </ClCompile> + <ClCompile Include="pch.cpp"> + <Filter>Source Files</Filter> + </ClCompile> + <ClCompile Include="loader.cpp"> + <Filter>Source Files</Filter> + </ClCompile> + <ClCompile Include="hookutils.cpp"> + <Filter>Source Files</Filter> + </ClCompile> + </ItemGroup> + <ItemGroup> + <MASM Include="wsock32.asm"> + <Filter>Source Files</Filter> + </MASM> + </ItemGroup> + <ItemGroup> + <None Include="wsock32.def"> + <Filter>Source Files</Filter> + </None> + </ItemGroup> +</Project>
\ No newline at end of file diff --git a/loader_wsock32_proxy/pch.cpp b/loader_wsock32_proxy/pch.cpp new file mode 100644 index 00000000..64b7eef6 --- /dev/null +++ b/loader_wsock32_proxy/pch.cpp @@ -0,0 +1,5 @@ +// pch.cpp: source file corresponding to the pre-compiled header + +#include "pch.h" + +// When you are using pre-compiled headers, this source file is necessary for compilation to succeed. diff --git a/loader_wsock32_proxy/pch.h b/loader_wsock32_proxy/pch.h new file mode 100644 index 00000000..0103ff59 --- /dev/null +++ b/loader_wsock32_proxy/pch.h @@ -0,0 +1,16 @@ +// pch.h: This is a precompiled header file. +// Files listed below are compiled only once, improving build performance for future builds. +// This also affects IntelliSense performance, including code completion and many code browsing features. +// However, files listed here are ALL re-compiled if any one of them is updated between builds. +// Do not add files here that you will be updating frequently as this negates the performance advantage. + +#ifndef PCH_H +#define PCH_H + +#define WIN32_LEAN_AND_MEAN // Exclude rarely-used stuff from Windows headers +// Windows Header Files +#include <windows.h> + +#include "include/MinHook.h" + +#endif //PCH_H diff --git a/loader_wsock32_proxy/wsock32.asm b/loader_wsock32_proxy/wsock32.asm new file mode 100644 index 00000000..22a9c384 --- /dev/null +++ b/loader_wsock32_proxy/wsock32.asm @@ -0,0 +1,7 @@ +.data +extern PA : qword +.code +RunASM proc +jmp qword ptr [PA] +RunASM endp +end diff --git a/loader_wsock32_proxy/wsock32.def b/loader_wsock32_proxy/wsock32.def new file mode 100644 index 00000000..448440b4 --- /dev/null +++ b/loader_wsock32_proxy/wsock32.def @@ -0,0 +1,78 @@ +LIBRARY wsock32 +EXPORTS + AcceptEx=mswsock.AcceptEx + EnumProtocolsA=PROXY_EnumProtocolsA + EnumProtocolsW=PROXY_EnumProtocolsW + GetAcceptExSockaddrs=mswsock.GetAcceptExSockaddrs + GetAddressByNameA=PROXY_GetAddressByNameA + GetAddressByNameW=PROXY_GetAddressByNameW + GetNameByTypeA=ws2_32.GetNameByTypeA + GetNameByTypeW=ws2_32.GetNameByTypeW + GetServiceA=ws2_32.GetServiceA + GetServiceW=ws2_32.GetServiceW + GetTypeByNameA=ws2_32.GetTypeByNameA + GetTypeByNameW=ws2_32.GetTypeByNameW + MigrateWinsockConfiguration=ws2_32.MigrateWinsockConfiguration + NPLoadNameSpaces=ws2_32.NPLoadNameSpaces + SetServiceA=ws2_32.SetServiceA + SetServiceW=ws2_32.SetServiceW + TransmitFile=mswsock.TransmitFile + WEP=PROXY_WEP + WSAAsyncGetHostByAddr=ws2_32.WSAAsyncGetHostByAddr + WSAAsyncGetHostByName=ws2_32.WSAAsyncGetHostByName + WSAAsyncGetProtoByName=ws2_32.WSAAsyncGetProtoByName + WSAAsyncGetProtoByNumber=ws2_32.WSAAsyncGetProtoByNumber + WSAAsyncGetServByName=ws2_32.WSAAsyncGetServByName + WSAAsyncGetServByPort=ws2_32.WSAAsyncGetServByPort + WSAAsyncSelect=ws2_32.WSAAsyncSelect + WSACancelAsyncRequest=ws2_32.WSACancelAsyncRequest + WSACancelBlockingCall=ws2_32.WSACancelBlockingCall + WSACleanup=ws2_32.WSACleanup @116 + WSAGetLastError=ws2_32.WSAGetLastError @111 + WSAIsBlocking=ws2_32.WSAIsBlocking + WSARecvEx=PROXY_WSARecvEx + WSASetBlockingHook=ws2_32.WSASetBlockingHook + WSASetLastError=ws2_32.WSASetLastError @112 + WSAStartup=ws2_32.WSAStartup @115 + WSAUnhookBlockingHook=ws2_32.WSAUnhookBlockingHook + WSApSetPostRoutine=ws2_32.WSApSetPostRoutine + __WSAFDIsSet=PROXY___WSAFDIsSet @151 + accept=ws2_32.accept @1 + bind=ws2_32.bind @2 + closesocket=ws2_32.closesocket @3 + connect=ws2_32.connect @4 + dn_expand=ws2_32.dn_expand @1106 + gethostbyaddr=ws2_32.gethostbyaddr + gethostbyname=ws2_32.gethostbyname @52 + gethostname=ws2_32.gethostname @57 + getnetbyname=PROXY_getnetbyname @ 1101 + getpeername=ws2_32.getpeername @5 + getprotobyname=ws2_32.getprotobyname + getprotobynumber=ws2_32.getprotobynumber + getservbyname=ws2_32.getservbyname + getservbyport=ws2_32.getservbyport + getsockname=ws2_32.getsockname @6 + getsockopt=PROXY_getsockopt @7 + htonl=ws2_32.htonl + htons=ws2_32.htons @9 + inet_addr=ws2_32.inet_addr + inet_network=PROXY_inet_network + inet_ntoa=ws2_32.inet_ntoa + ioctlsocket=ws2_32.ioctlsocket @12 + listen=ws2_32.listen @13 + ntohl=ws2_32.ntohl + ntohs=ws2_32.ntohs @15 + rcmd=ws2_32.rcmd + recv=ws2_32.recv @16 + recvfrom=ws2_32.recvfrom @17 + rexec=ws2_32.rexec + rresvport=ws2_32.rresvport + s_perror=PROXY_s_perror + select=ws2_32.select @18 + select=ws2_32.select @18 + send=ws2_32.send @19 + sendto=ws2_32.sendto @20 + sethostname=ws2_32.sethostname + setsockopt=PROXY_setsockopt @21 + shutdown=ws2_32.shutdown @22 + socket=ws2_32.socket @23 |