/* * SSL client with certificate authentication * * Copyright The Mbed TLS Contributors * SPDX-License-Identifier: Apache-2.0 * * Licensed under the Apache License, Version 2.0 (the "License"); you may * not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #include "ssl_test_lib.h" #if defined(MBEDTLS_SSL_TEST_IMPOSSIBLE) int main( void ) { mbedtls_printf( MBEDTLS_SSL_TEST_IMPOSSIBLE ); mbedtls_exit( 0 ); } #elif !defined(MBEDTLS_SSL_CLI_C) int main( void ) { mbedtls_printf( "MBEDTLS_SSL_CLI_C not defined.\n" ); mbedtls_exit( 0 ); } #else /* !MBEDTLS_SSL_TEST_IMPOSSIBLE && MBEDTLS_SSL_CLI_C */ /* Size of memory to be allocated for the heap, when using the library's memory * management and MBEDTLS_MEMORY_BUFFER_ALLOC_C is enabled. */ #define MEMORY_HEAP_SIZE 120000 #define MAX_REQUEST_SIZE 20000 #define MAX_REQUEST_SIZE_STR "20000" #define DFL_SERVER_NAME "localhost" #define DFL_SERVER_ADDR NULL #define DFL_SERVER_PORT "4433" #define DFL_REQUEST_PAGE "/" #define DFL_REQUEST_SIZE -1 #define DFL_DEBUG_LEVEL 0 #define DFL_CONTEXT_CRT_CB 0 #define DFL_NBIO 0 #define DFL_EVENT 0 #define DFL_READ_TIMEOUT 0 #define DFL_MAX_RESEND 0 #define DFL_CA_FILE "" #define DFL_CA_PATH "" #define DFL_CRT_FILE "" #define DFL_KEY_FILE "" #define DFL_KEY_OPAQUE 0 #define DFL_KEY_PWD "" #define DFL_PSK "" #define DFL_PSK_OPAQUE 0 #define DFL_PSK_IDENTITY "Client_identity" #define DFL_ECJPAKE_PW NULL #define DFL_EC_MAX_OPS -1 #define DFL_FORCE_CIPHER 0 #define DFL_RENEGOTIATION MBEDTLS_SSL_RENEGOTIATION_DISABLED #define DFL_ALLOW_LEGACY -2 #define DFL_RENEGOTIATE 0 #define DFL_EXCHANGES 1 #define DFL_MIN_VERSION -1 #define DFL_MAX_VERSION -1 #define DFL_ARC4 -1 #define DFL_SHA1 -1 #define DFL_AUTH_MODE -1 #define DFL_MFL_CODE MBEDTLS_SSL_MAX_FRAG_LEN_NONE #define DFL_TRUNC_HMAC -1 #define DFL_RECSPLIT -1 #define DFL_DHMLEN -1 #define DFL_RECONNECT 0 #define DFL_RECO_DELAY 0 #define DFL_RECO_MODE 1 #define DFL_CID_ENABLED 0 #define DFL_CID_VALUE "" #define DFL_CID_ENABLED_RENEGO -1 #define DFL_CID_VALUE_RENEGO NULL #define DFL_RECONNECT_HARD 0 #define DFL_TICKETS MBEDTLS_SSL_SESSION_TICKETS_ENABLED #define DFL_ALPN_STRING NULL #define DFL_CURVES NULL #define DFL_TRANSPORT MBEDTLS_SSL_TRANSPORT_STREAM #define DFL_HS_TO_MIN 0 #define DFL_HS_TO_MAX 0 #define DFL_DTLS_MTU -1 #define DFL_DGRAM_PACKING 1 #define DFL_FALLBACK -1 #define DFL_EXTENDED_MS -1 #define DFL_ETM -1 #define DFL_SERIALIZE 0 #define DFL_CONTEXT_FILE "" #define DFL_EXTENDED_MS_ENFORCE -1 #define DFL_CA_CALLBACK 0 #define DFL_EAP_TLS 0 #define DFL_REPRODUCIBLE 0 #define DFL_NSS_KEYLOG 0 #define DFL_NSS_KEYLOG_FILE NULL #define DFL_SKIP_CLOSE_NOTIFY 0 #define DFL_QUERY_CONFIG_MODE 0 #define DFL_USE_SRTP 0 #define DFL_SRTP_FORCE_PROFILE 0 #define DFL_SRTP_MKI "" #define GET_REQUEST "GET %s HTTP/1.0\r\nExtra-header: " #define GET_REQUEST_END "\r\n\r\n" #if defined(MBEDTLS_X509_CRT_PARSE_C) #define USAGE_CONTEXT_CRT_CB \ " context_crt_cb=%%d This determines whether the CRT verification callback is bound\n" \ " to the SSL configuration of the SSL context.\n" \ " Possible values:\n"\ " - 0 (default): Use CRT callback bound to configuration\n" \ " - 1: Use CRT callback bound to SSL context\n" #else #define USAGE_CONTEXT_CRT_CB "" #endif /* MBEDTLS_X509_CRT_PARSE_C */ #if defined(MBEDTLS_X509_CRT_PARSE_C) #if defined(MBEDTLS_FS_IO) #define USAGE_IO \ " ca_file=%%s The single file containing the top-level CA(s) you fully trust\n" \ " default: \"\" (pre-loaded)\n" \ " use \"none\" to skip loading any top-level CAs.\n" \ " ca_path=%%s The path containing the top-level CA(s) you fully trust\n" \ " default: \"\" (pre-loaded) (overrides ca_file)\n" \ " use \"none\" to skip loading any top-level CAs.\n" \ " crt_file=%%s Your own cert and chain (in bottom to top order, top may be omitted)\n" \ " default: \"\" (pre-loaded)\n" \ " key_file=%%s default: \"\" (pre-loaded)\n"\ " key_pwd=%%s Password for key specified by key_file argument\n"\ " default: none\n" #else #define USAGE_IO \ " No file operations available (MBEDTLS_FS_IO not defined)\n" #endif /* MBEDTLS_FS_IO */ #else /* MBEDTLS_X509_CRT_PARSE_C */ #define USAGE_IO "" #endif /* MBEDTLS_X509_CRT_PARSE_C */ #if defined(MBEDTLS_USE_PSA_CRYPTO) && defined(MBEDTLS_X509_CRT_PARSE_C) #define USAGE_KEY_OPAQUE \ " key_opaque=%%d Handle your private key as if it were opaque\n" \ " default: 0 (disabled)\n" #else #define USAGE_KEY_OPAQUE "" #endif #if defined(MBEDTLS_SSL_DTLS_CONNECTION_ID) #define USAGE_CID \ " cid=%%d Disable (0) or enable (1) the use of the DTLS Connection ID extension.\n" \ " default: 0 (disabled)\n" \ " cid_renego=%%d Disable (0) or enable (1) the use of the DTLS Connection ID extension during renegotiation.\n" \ " default: same as 'cid' parameter\n" \ " cid_val=%%s The CID to use for incoming messages (in hex, without 0x).\n" \ " default: \"\"\n" \ " cid_val_renego=%%s The CID to use for incoming messages (in hex, without 0x) after renegotiation.\n" \ " default: same as 'cid_val' parameter\n" #else /* MBEDTLS_SSL_DTLS_CONNECTION_ID */ #define USAGE_CID "" #endif /* MBEDTLS_SSL_DTLS_CONNECTION_ID */ #if defined(MBEDTLS_KEY_EXCHANGE_SOME_PSK_ENABLED) #define USAGE_PSK_RAW \ " psk=%%s default: \"\" (disabled)\n" \ " The PSK values are in hex, without 0x.\n" \ " psk_identity=%%s default: \"Client_identity\"\n" #if defined(MBEDTLS_USE_PSA_CRYPTO) #define USAGE_PSK_SLOT \ " psk_opaque=%%d default: 0 (don't use opaque static PSK)\n" \ " Enable this to store the PSK configured through command line\n" \ " parameter `psk` in a PSA-based key slot.\n" \ " Note: Currently only supported in conjunction with\n" \ " the use of min_version to force TLS 1.2 and force_ciphersuite \n" \ " to force a particular PSK-only ciphersuite.\n" \ " Note: This is to test integration of PSA-based opaque PSKs with\n" \ " Mbed TLS only. Production systems are likely to configure Mbed TLS\n" \ " with prepopulated key slots instead of importing raw key material.\n" #else #define USAGE_PSK_SLOT "" #endif /* MBEDTLS_USE_PSA_CRYPTO */ #define USAGE_PSK USAGE_PSK_RAW USAGE_PSK_SLOT #else #define USAGE_PSK "" #endif /* MBEDTLS_KEY_EXCHANGE_SOME_PSK_ENABLED */ #if defined(MBEDTLS_X509_TRUSTED_CERTIFICATE_CALLBACK) #define USAGE_CA_CALLBACK \ " ca_callback=%%d default: 0 (disabled)\n" \ " Enable this to use the trusted certificate callback function\n" #else #define USAGE_CA_CALLBACK "" #endif /* MBEDTLS_X509_TRUSTED_CERTIFICATE_CALLBACK */ #if defined(MBEDTLS_SSL_SESSION_TICKETS) #define USAGE_TICKETS \ " tickets=%%d default: 1 (enabled)\n" #else #define USAGE_TICKETS "" #endif /* MBEDTLS_SSL_SESSION_TICKETS */ #if defined(MBEDTLS_SSL_EXPORT_KEYS) #define USAGE_EAP_TLS \ " eap_tls=%%d default: 0 (disabled)\n" #define USAGE_NSS_KEYLOG \ " nss_keylog=%%d default: 0 (disabled)\n" \ " This cannot be used with eap_tls=1\n" #define USAGE_NSS_KEYLOG_FILE \ " nss_keylog_file=%%s\n" #if defined(MBEDTLS_SSL_DTLS_SRTP) #define USAGE_SRTP \ " use_srtp=%%d default: 0 (disabled)\n" \ " This cannot be used with eap_tls=1 or "\ " nss_keylog=1\n" \ " srtp_force_profile=%%d default: 0 (all enabled)\n" \ " available profiles:\n" \ " 1 - SRTP_AES128_CM_HMAC_SHA1_80\n" \ " 2 - SRTP_AES128_CM_HMAC_SHA1_32\n" \ " 3 - SRTP_NULL_HMAC_SHA1_80\n" \ " 4 - SRTP_NULL_HMAC_SHA1_32\n" \ " mki=%%s default: \"\" (in hex, without 0x)\n" #else /* MBEDTLS_SSL_DTLS_SRTP */ #define USAGE_SRTP "" #endif #else /* MBEDTLS_SSL_EXPORT_KEYS */ #define USAGE_EAP_TLS "" #define USAGE_NSS_KEYLOG "" #define USAGE_NSS_KEYLOG_FILE "" #define USAGE_SRTP "" #endif /* MBEDTLS_SSL_EXPORT_KEYS */ #if defined(MBEDTLS_SSL_TRUNCATED_HMAC) #define USAGE_TRUNC_HMAC \ " trunc_hmac=%%d default: library default\n" #else #define USAGE_TRUNC_HMAC "" #endif /* MBEDTLS_SSL_TRUNCATED_HMAC */ #if defined(MBEDTLS_SSL_MAX_FRAGMENT_LENGTH) #define USAGE_MAX_FRAG_LEN \ " max_frag_len=%%d default: 16384 (tls default)\n" \ " options: 512, 1024, 2048, 4096\n" #else #define USAGE_MAX_FRAG_LEN "" #endif /* MBEDTLS_SSL_MAX_FRAGMENT_LENGTH */ #if defined(MBEDTLS_SSL_CBC_RECORD_SPLITTING) #define USAGE_RECSPLIT \ " recsplit=0/1 default: (library default: on)\n" #else #define USAGE_RECSPLIT #endif #if defined(MBEDTLS_DHM_C) #define USAGE_DHMLEN \ " dhmlen=%%d default: (library default: 1024 bits)\n" #else #define USAGE_DHMLEN #endif #if defined(MBEDTLS_SSL_ALPN) #define USAGE_ALPN \ " alpn=%%s default: \"\" (disabled)\n" \ " example: spdy/1,http/1.1\n" #else #define USAGE_ALPN "" #endif /* MBEDTLS_SSL_ALPN */ #if defined(MBEDTLS_ECP_C) #define USAGE_CURVES \ " curves=a,b,c,d default: \"default\" (library default)\n" \ " example: \"secp521r1,brainpoolP512r1\"\n" \ " - use \"none\" for empty list\n" \ " - see mbedtls_ecp_curve_list()\n" \ " for acceptable curve names\n" #else #define USAGE_CURVES "" #endif #if defined(MBEDTLS_SSL_PROTO_DTLS) #define USAGE_DTLS \ " dtls=%%d default: 0 (TLS)\n" \ " hs_timeout=%%d-%%d default: (library default: 1000-60000)\n" \ " range of DTLS handshake timeouts in millisecs\n" \ " mtu=%%d default: (library default: unlimited)\n" \ " dgram_packing=%%d default: 1 (allowed)\n" \ " allow or forbid packing of multiple\n" \ " records within a single datgram.\n" #else #define USAGE_DTLS "" #endif #if defined(MBEDTLS_SSL_FALLBACK_SCSV) #define USAGE_FALLBACK \ " fallback=0/1 default: (library default: off)\n" #else #define USAGE_FALLBACK "" #endif #if defined(MBEDTLS_SSL_EXTENDED_MASTER_SECRET) #define USAGE_EMS \ " extended_ms=0/1 default: (library default: on)\n" #else #define USAGE_EMS "" #endif #if defined(MBEDTLS_SSL_ENCRYPT_THEN_MAC) #define USAGE_ETM \ " etm=0/1 default: (library default: on)\n" #else #define USAGE_ETM "" #endif #define USAGE_REPRODUCIBLE \ " reproducible=0/1 default: 0 (disabled)\n" #if defined(MBEDTLS_SSL_RENEGOTIATION) #define USAGE_RENEGO \ " renegotiation=%%d default: 0 (disabled)\n" \ " renegotiate=%%d default: 0 (disabled)\n" #else #define USAGE_RENEGO "" #endif #if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED) #define USAGE_ECJPAKE \ " ecjpake_pw=%%s default: none (disabled)\n" #else #define USAGE_ECJPAKE "" #endif #if defined(MBEDTLS_ECP_RESTARTABLE) #define USAGE_ECRESTART \ " ec_max_ops=%%s default: library default (restart disabled)\n" #else #define USAGE_ECRESTART "" #endif #if defined(MBEDTLS_SSL_CONTEXT_SERIALIZATION) #define USAGE_SERIALIZATION \ " serialize=%%d default: 0 (do not serialize/deserialize)\n" \ " options: 1 (serialize)\n" \ " 2 (serialize with re-initialization)\n" \ " context_file=%%s The file path to write a serialized connection\n"\ " in the form of base64 code (serialize option\n" \ " must be set)\n" \ " default: \"\" (do nothing)\n" \ " option: a file path\n" #else #define USAGE_SERIALIZATION "" #endif /* USAGE is arbitrarily split to stay under the portable string literal * length limit: 4095 bytes in C99. */ #define USAGE1 \ "\n usage: ssl_client2 param=<>...\n" \ "\n acceptable parameters:\n" \ " server_name=%%s default: localhost\n" \ " server_addr=%%s default: given by name\n" \ " server_port=%%d default: 4433\n" \ " request_page=%%s default: \".\"\n" \ " request_size=%%d default: about 34 (basic request)\n" \ " (minimum: 0, max: " MAX_REQUEST_SIZE_STR ")\n" \ " If 0, in the first exchange only an empty\n" \ " application data message is sent followed by\n" \ " a second non-empty message before attempting\n" \ " to read a response from the server\n" \ " debug_level=%%d default: 0 (disabled)\n" \ " nbio=%%d default: 0 (blocking I/O)\n" \ " options: 1 (non-blocking), 2 (added delays)\n" \ " event=%%d default: 0 (loop)\n" \ " options: 1 (level-triggered, implies nbio=1),\n" \ " read_timeout=%%d default: 0 ms (no timeout)\n" \ " max_resend=%%d default: 0 (no resend on timeout)\n" \ " skip_close_notify=%%d default: 0 (send close_notify)\n" \ "\n" \ USAGE_DTLS \ USAGE_CID \ USAGE_SRTP \ "\n" #define USAGE2 \ " auth_mode=%%s default: (library default: none)\n" \ " options: none, optional, required\n" \ USAGE_IO \ USAGE_KEY_OPAQUE \ USAGE_CA_CALLBACK \ "\n" \ USAGE_PSK \ USAGE_ECJPAKE \ USAGE_ECRESTART \ "\n" #define USAGE3 \ " allow_legacy=%%d default: (library default: no)\n" \ USAGE_RENEGO \ " exchanges=%%d default: 1\n" \ " reconnect=%%d number of reconnections using session resumption\n" \ " default: 0 (disabled)\n" \ " reco_delay=%%d default: 0 seconds\n" \ " reco_mode=%%d 0: copy session, 1: serialize session\n" \ " default: 1\n" \ " reconnect_hard=%%d default: 0 (disabled)\n" \ USAGE_TICKETS \ USAGE_EAP_TLS \ USAGE_MAX_FRAG_LEN \ USAGE_TRUNC_HMAC \ USAGE_CONTEXT_CRT_CB \ USAGE_ALPN \ USAGE_FALLBACK \ USAGE_EMS \ USAGE_ETM \ USAGE_REPRODUCIBLE \ USAGE_CURVES \ USAGE_RECSPLIT \ USAGE_DHMLEN \ "\n" #define USAGE4 \ " arc4=%%d default: (library default: 0)\n" \ " allow_sha1=%%d default: 0\n" \ " min_version=%%s default: (library default: tls1)\n" \ " max_version=%%s default: (library default: tls1_2)\n" \ " force_version=%%s default: \"\" (none)\n" \ " options: ssl3, tls1, tls1_1, tls1_2, dtls1, dtls1_2\n" \ "\n" \ " force_ciphersuite= default: all enabled\n"\ " query_config= return 0 if the specified\n" \ " configuration macro is defined and 1\n" \ " otherwise. The expansion of the macro\n" \ " is printed if it is defined\n" \ USAGE_SERIALIZATION \ " acceptable ciphersuite names:\n" #define ALPN_LIST_SIZE 10 #define CURVE_LIST_SIZE 20 /* * global options */ struct options { const char *server_name; /* hostname of the server (client only) */ const char *server_addr; /* address of the server (client only) */ const char *server_port; /* port on which the ssl service runs */ int debug_level; /* level of debugging */ int nbio; /* should I/O be blocking? */ int event; /* loop or event-driven IO? level or edge triggered? */ uint32_t read_timeout; /* timeout on mbedtls_ssl_read() in milliseconds */ int max_resend; /* DTLS times to resend on read timeout */ const char *request_page; /* page on server to request */ int request_size; /* pad request with header to requested size */ const char *ca_file; /* the file with the CA certificate(s) */ const char *ca_path; /* the path with the CA certificate(s) reside */ const char *crt_file; /* the file with the client certificate */ const char *key_file; /* the file with the client key */ int key_opaque; /* handle private key as if it were opaque */ #if defined(MBEDTLS_USE_PSA_CRYPTO) int psk_opaque; #endif #if defined(MBEDTLS_X509_TRUSTED_CERTIFICATE_CALLBACK) int ca_callback; /* Use callback for trusted certificate list */ #endif const char *key_pwd; /* the password for the client key */ const char *psk; /* the pre-shared key */ const char *psk_identity; /* the pre-shared key identity */ const char *ecjpake_pw; /* the EC J-PAKE password */ int ec_max_ops; /* EC consecutive operations limit */ int force_ciphersuite[2]; /* protocol/ciphersuite to use, or all */ int renegotiation; /* enable / disable renegotiation */ int allow_legacy; /* allow legacy renegotiation */ int renegotiate; /* attempt renegotiation? */ int renego_delay; /* delay before enforcing renegotiation */ int exchanges; /* number of data exchanges */ int min_version; /* minimum protocol version accepted */ int max_version; /* maximum protocol version accepted */ int arc4; /* flag for arc4 suites support */ int allow_sha1; /* flag for SHA-1 support */ int auth_mode; /* verify mode for connection */ unsigned char mfl_code; /* code for maximum fragment length */ int trunc_hmac; /* negotiate truncated hmac or not */ int recsplit; /* enable record splitting? */ int dhmlen; /* minimum DHM params len in bits */ int reconnect; /* attempt to resume session */ int reco_delay; /* delay in seconds before resuming session */ int reco_mode; /* how to keep the session around */ int reconnect_hard; /* unexpectedly reconnect from the same port */ int tickets; /* enable / disable session tickets */ const char *curves; /* list of supported elliptic curves */ const char *alpn_string; /* ALPN supported protocols */ int transport; /* TLS or DTLS? */ uint32_t hs_to_min; /* Initial value of DTLS handshake timer */ uint32_t hs_to_max; /* Max value of DTLS handshake timer */ int dtls_mtu; /* UDP Maximum tranport unit for DTLS */ int fallback; /* is this a fallback connection? */ int dgram_packing; /* allow/forbid datagram packing */ int extended_ms; /* negotiate extended master secret? */ int etm; /* negotiate encrypt then mac? */ int context_crt_cb; /* use context-specific CRT verify callback */ int eap_tls; /* derive EAP-TLS keying material? */ int nss_keylog; /* export NSS key log material */ const char *nss_keylog_file; /* NSS key log file */ int cid_enabled; /* whether to use the CID extension or not */ int cid_enabled_renego; /* whether to use the CID extension or not * during renegotiation */ const char *cid_val; /* the CID to use for incoming messages */ int serialize; /* serialize/deserialize connection */ const char *context_file; /* the file to write a serialized connection * in the form of base64 code (serialize * option must be set) */ const char *cid_val_renego; /* the CID to use for incoming messages * after renegotiation */ int reproducible; /* make communication reproducible */ int skip_close_notify; /* skip sending the close_notify alert */ int query_config_mode; /* whether to read config */ int use_srtp; /* Support SRTP */ int force_srtp_profile; /* SRTP protection profile to use or all */ const char *mki; /* The dtls mki value to use */ } opt; #include "ssl_test_common_source.c" #if defined(MBEDTLS_X509_CRT_PARSE_C) static unsigned char peer_crt_info[1024]; /* * Enabled if debug_level > 1 in code below */ static int my_verify( void *data, mbedtls_x509_crt *crt, int depth, uint32_t *flags ) { char buf[1024]; ((void) data); mbedtls_x509_crt_info( buf, sizeof( buf ) - 1, "", crt ); if( depth == 0 ) memcpy( peer_crt_info, buf, sizeof( buf ) ); if( opt.debug_level == 0 ) return( 0 ); mbedtls_printf( "\nVerify requested for (Depth %d):\n", depth ); mbedtls_printf( "%s", buf ); if ( ( *flags ) == 0 ) mbedtls_printf( " This certificate has no flags\n" ); else { mbedtls_x509_crt_verify_info( buf, sizeof( buf ), " ! ", *flags ); mbedtls_printf( "%s\n", buf ); } return( 0 ); } #endif /* MBEDTLS_X509_CRT_PARSE_C */ #if defined(MBEDTLS_SSL_DTLS_CONNECTION_ID) int report_cid_usage( mbedtls_ssl_context *ssl, const char *additional_description ) { int ret; unsigned char peer_cid[ MBEDTLS_SSL_CID_OUT_LEN_MAX ]; size_t peer_cid_len; int cid_negotiated; if( opt.transport != MBEDTLS_SSL_TRANSPORT_DATAGRAM ) return( 0 ); /* Check if the use of a CID has been negotiated, * but don't ask for the CID value and length. * * Note: Here and below, we're demonstrating the various ways * in which mbedtls_ssl_get_peer_cid() can be called, * depending on whether or not the length/value of the * peer's CID is needed. * * An actual application, however, should use * just one call to mbedtls_ssl_get_peer_cid(). */ ret = mbedtls_ssl_get_peer_cid( ssl, &cid_negotiated, NULL, NULL ); if( ret != 0 ) { mbedtls_printf( " failed\n ! mbedtls_ssl_get_peer_cid returned -0x%x\n\n", (unsigned int) -ret ); return( ret ); } if( cid_negotiated == MBEDTLS_SSL_CID_DISABLED ) { if( opt.cid_enabled == MBEDTLS_SSL_CID_ENABLED ) { mbedtls_printf( "(%s) Use of Connection ID was rejected by the server.\n", additional_description ); } } else { size_t idx=0; mbedtls_printf( "(%s) Use of Connection ID has been negotiated.\n", additional_description ); /* Ask for just the length of the peer's CID. */ ret = mbedtls_ssl_get_peer_cid( ssl, &cid_negotiated, NULL, &peer_cid_len ); if( ret != 0 ) { mbedtls_printf( " failed\n ! mbedtls_ssl_get_peer_cid returned -0x%x\n\n", (unsigned int) -ret ); return( ret ); } /* Ask for just length + value of the peer's CID. */ ret = mbedtls_ssl_get_peer_cid( ssl, &cid_negotiated, peer_cid, &peer_cid_len ); if( ret != 0 ) { mbedtls_printf( " failed\n ! mbedtls_ssl_get_peer_cid returned -0x%x\n\n", (unsigned int) -ret ); return( ret ); } mbedtls_printf( "(%s) Peer CID (length %u Bytes): ", additional_description, (unsigned) peer_cid_len ); while( idx < peer_cid_len ) { mbedtls_printf( "%02x ", peer_cid[ idx ] ); idx++; } mbedtls_printf( "\n" ); } return( 0 ); } #endif /* MBEDTLS_SSL_DTLS_CONNECTION_ID */ int main( int argc, char *argv[] ) { int ret = 0, len, tail_len, i, written, frags, retry_left; int query_config_ret = 0; mbedtls_net_context server_fd; io_ctx_t io_ctx; unsigned char buf[MAX_REQUEST_SIZE + 1]; #if defined(MBEDTLS_KEY_EXCHANGE_SOME_PSK_ENABLED) unsigned char psk[MBEDTLS_PSK_MAX_LEN]; size_t psk_len = 0; #endif #if defined(MBEDTLS_SSL_DTLS_CONNECTION_ID) unsigned char cid[MBEDTLS_SSL_CID_IN_LEN_MAX]; unsigned char cid_renego[MBEDTLS_SSL_CID_IN_LEN_MAX]; size_t cid_len = 0; size_t cid_renego_len = 0; #endif #if defined(MBEDTLS_SSL_ALPN) const char *alpn_list[ALPN_LIST_SIZE]; #endif #if defined(MBEDTLS_MEMORY_BUFFER_ALLOC_C) unsigned char alloc_buf[MEMORY_HEAP_SIZE]; #endif #if defined(MBEDTLS_ECP_C) mbedtls_ecp_group_id curve_list[CURVE_LIST_SIZE]; const mbedtls_ecp_curve_info *curve_cur; #endif #if defined(MBEDTLS_SSL_DTLS_SRTP) unsigned char mki[MBEDTLS_TLS_SRTP_MAX_MKI_LENGTH]; size_t mki_len=0; #endif const char *pers = "ssl_client2"; #if defined(MBEDTLS_USE_PSA_CRYPTO) psa_key_id_t slot = 0; psa_algorithm_t alg = 0; psa_key_attributes_t key_attributes; psa_status_t status; #endif #if defined(MBEDTLS_X509_CRT_PARSE_C) mbedtls_x509_crt_profile crt_profile_for_test = mbedtls_x509_crt_profile_default; #endif rng_context_t rng; mbedtls_ssl_context ssl; mbedtls_ssl_config conf; mbedtls_ssl_session saved_session; unsigned char *session_data = NULL; size_t session_data_len = 0; #if defined(MBEDTLS_TIMING_C) mbedtls_timing_delay_context timer; #endif #if defined(MBEDTLS_X509_CRT_PARSE_C) uint32_t flags; mbedtls_x509_crt cacert; mbedtls_x509_crt clicert; mbedtls_pk_context pkey; #if defined(MBEDTLS_USE_PSA_CRYPTO) psa_key_id_t key_slot = 0; /* invalid key slot */ #endif #endif /* MBEDTLS_X509_CRT_PARSE_C */ char *p, *q; const int *list; #if defined(MBEDTLS_SSL_CONTEXT_SERIALIZATION) unsigned char *context_buf = NULL; size_t context_buf_len; #endif #if defined(MBEDTLS_SSL_EXPORT_KEYS) unsigned char eap_tls_keymaterial[16]; unsigned char eap_tls_iv[8]; const char* eap_tls_label = "client EAP encryption"; eap_tls_keys eap_tls_keying; #if defined( MBEDTLS_SSL_DTLS_SRTP ) /*! master keys and master salt for SRTP generated during handshake */ unsigned char dtls_srtp_key_material[MBEDTLS_TLS_SRTP_MAX_KEY_MATERIAL_LENGTH]; const char* dtls_srtp_label = "EXTRACTOR-dtls_srtp"; dtls_srtp_keys dtls_srtp_keying; const mbedtls_ssl_srtp_profile default_profiles[] = { MBEDTLS_TLS_SRTP_AES128_CM_HMAC_SHA1_80, MBEDTLS_TLS_SRTP_AES128_CM_HMAC_SHA1_32, MBEDTLS_TLS_SRTP_NULL_HMAC_SHA1_80, MBEDTLS_TLS_SRTP_NULL_HMAC_SHA1_32, MBEDTLS_TLS_SRTP_UNSET }; #endif /* MBEDTLS_SSL_DTLS_SRTP */ #endif /* MBEDTLS_SSL_EXPORT_KEYS */ #if defined(MBEDTLS_MEMORY_BUFFER_ALLOC_C) mbedtls_memory_buffer_alloc_init( alloc_buf, sizeof(alloc_buf) ); #endif #if defined(MBEDTLS_TEST_HOOKS) test_hooks_init( ); #endif /* MBEDTLS_TEST_HOOKS */ /* * Make sure memory references are valid. */ mbedtls_net_init( &server_fd ); mbedtls_ssl_init( &ssl ); mbedtls_ssl_config_init( &conf ); memset( &saved_session, 0, sizeof( mbedtls_ssl_session ) ); rng_init( &rng ); #if defined(MBEDTLS_X509_CRT_PARSE_C) mbedtls_x509_crt_init( &cacert ); mbedtls_x509_crt_init( &clicert ); mbedtls_pk_init( &pkey ); #endif #if defined(MBEDTLS_SSL_ALPN) memset( (void * ) alpn_list, 0, sizeof( alpn_list ) ); #endif #if defined(MBEDTLS_USE_PSA_CRYPTO) status = psa_crypto_init(); if( status != PSA_SUCCESS ) { mbedtls_fprintf( stderr, "Failed to initialize PSA Crypto implementation: %d\n", (int) status ); ret = MBEDTLS_ERR_SSL_HW_ACCEL_FAILED; goto exit; } #endif /* MBEDTLS_USE_PSA_CRYPTO */ #if defined(MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG) mbedtls_test_enable_insecure_external_rng( ); #endif /* MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG */ if( argc == 0 ) { usage: if( ret == 0 ) ret = 1; mbedtls_printf( USAGE1 ); mbedtls_printf( USAGE2 ); mbedtls_printf( USAGE3 ); mbedtls_printf( USAGE4 ); list = mbedtls_ssl_list_ciphersuites(); while( *list ) { mbedtls_printf(" %-42s", mbedtls_ssl_get_ciphersuite_name( *list ) ); list++; if( !*list ) break; mbedtls_printf(" %s\n", mbedtls_ssl_get_ciphersuite_name( *list ) ); list++; } mbedtls_printf("\n"); goto exit; } opt.server_name = DFL_SERVER_NAME; opt.server_addr = DFL_SERVER_ADDR; opt.server_port = DFL_SERVER_PORT; opt.debug_level = DFL_DEBUG_LEVEL; opt.cid_enabled = DFL_CID_ENABLED; opt.cid_val = DFL_CID_VALUE; opt.cid_enabled_renego = DFL_CID_ENABLED_RENEGO; opt.cid_val_renego = DFL_CID_VALUE_RENEGO; opt.nbio = DFL_NBIO; opt.event = DFL_EVENT; opt.context_crt_cb = DFL_CONTEXT_CRT_CB; opt.read_timeout = DFL_READ_TIMEOUT; opt.max_resend = DFL_MAX_RESEND; opt.request_page = DFL_REQUEST_PAGE; opt.request_size = DFL_REQUEST_SIZE; opt.ca_file = DFL_CA_FILE; opt.ca_path = DFL_CA_PATH; opt.crt_file = DFL_CRT_FILE; opt.key_file = DFL_KEY_FILE; opt.key_opaque = DFL_KEY_OPAQUE; opt.key_pwd = DFL_KEY_PWD; opt.psk = DFL_PSK; #if defined(MBEDTLS_USE_PSA_CRYPTO) opt.psk_opaque = DFL_PSK_OPAQUE; #endif #if defined(MBEDTLS_X509_TRUSTED_CERTIFICATE_CALLBACK) opt.ca_callback = DFL_CA_CALLBACK; #endif opt.psk_identity = DFL_PSK_IDENTITY; opt.ecjpake_pw = DFL_ECJPAKE_PW; opt.ec_max_ops = DFL_EC_MAX_OPS; opt.force_ciphersuite[0]= DFL_FORCE_CIPHER; opt.renegotiation = DFL_RENEGOTIATION; opt.allow_legacy = DFL_ALLOW_LEGACY; opt.renegotiate = DFL_RENEGOTIATE; opt.exchanges = DFL_EXCHANGES; opt.min_version = DFL_MIN_VERSION; opt.max_version = DFL_MAX_VERSION; opt.arc4 = DFL_ARC4; opt.allow_sha1 = DFL_SHA1; opt.auth_mode = DFL_AUTH_MODE; opt.mfl_code = DFL_MFL_CODE; opt.trunc_hmac = DFL_TRUNC_HMAC; opt.recsplit = DFL_RECSPLIT; opt.dhmlen = DFL_DHMLEN; opt.reconnect = DFL_RECONNECT; opt.reco_delay = DFL_RECO_DELAY; opt.reco_mode = DFL_RECO_MODE; opt.reconnect_hard = DFL_RECONNECT_HARD; opt.tickets = DFL_TICKETS; opt.alpn_string = DFL_ALPN_STRING; opt.curves = DFL_CURVES; opt.transport = DFL_TRANSPORT; opt.hs_to_min = DFL_HS_TO_MIN; opt.hs_to_max = DFL_HS_TO_MAX; opt.dtls_mtu = DFL_DTLS_MTU; opt.fallback = DFL_FALLBACK; opt.extended_ms = DFL_EXTENDED_MS; opt.etm = DFL_ETM; opt.dgram_packing = DFL_DGRAM_PACKING; opt.serialize = DFL_SERIALIZE; opt.context_file = DFL_CONTEXT_FILE; opt.eap_tls = DFL_EAP_TLS; opt.reproducible = DFL_REPRODUCIBLE; opt.nss_keylog = DFL_NSS_KEYLOG; opt.nss_keylog_file = DFL_NSS_KEYLOG_FILE; opt.skip_close_notify = DFL_SKIP_CLOSE_NOTIFY; opt.query_config_mode = DFL_QUERY_CONFIG_MODE; opt.use_srtp = DFL_USE_SRTP; opt.force_srtp_profile = DFL_SRTP_FORCE_PROFILE; opt.mki = DFL_SRTP_MKI; for( i = 1; i < argc; i++ ) { p = argv[i]; if( ( q = strchr( p, '=' ) ) == NULL ) goto usage; *q++ = '\0'; if( strcmp( p, "server_name" ) == 0 ) opt.server_name = q; else if( strcmp( p, "server_addr" ) == 0 ) opt.server_addr = q; else if( strcmp( p, "server_port" ) == 0 ) opt.server_port = q; else if( strcmp( p, "dtls" ) == 0 ) { int t = atoi( q ); if( t == 0 ) opt.transport = MBEDTLS_SSL_TRANSPORT_STREAM; else if( t == 1 ) opt.transport = MBEDTLS_SSL_TRANSPORT_DATAGRAM; else goto usage; } else if( strcmp( p, "debug_level" ) == 0 ) { opt.debug_level = atoi( q ); if( opt.debug_level < 0 || opt.debug_level > 65535 ) goto usage; } else if( strcmp( p, "context_crt_cb" ) == 0 ) { opt.context_crt_cb = atoi( q ); if( opt.context_crt_cb != 0 && opt.context_crt_cb != 1 ) goto usage; } else if( strcmp( p, "nbio" ) == 0 ) { opt.nbio = atoi( q ); if( opt.nbio < 0 || opt.nbio > 2 ) goto usage; } else if( strcmp( p, "event" ) == 0 ) { opt.event = atoi( q ); if( opt.event < 0 || opt.event > 2 ) goto usage; } else if( strcmp( p, "read_timeout" ) == 0 ) opt.read_timeout = atoi( q ); else if( strcmp( p, "max_resend" ) == 0 ) { opt.max_resend = atoi( q ); if( opt.max_resend < 0 ) goto usage; } else if( strcmp( p, "request_page" ) == 0 ) opt.request_page = q; else if( strcmp( p, "request_size" ) == 0 ) { opt.request_size = atoi( q ); if( opt.request_size < 0 || opt.request_size > MAX_REQUEST_SIZE ) goto usage; } else if( strcmp( p, "ca_file" ) == 0 ) opt.ca_file = q; else if( strcmp( p, "ca_path" ) == 0 ) opt.ca_path = q; else if( strcmp( p, "crt_file" ) == 0 ) opt.crt_file = q; else if( strcmp( p, "key_file" ) == 0 ) opt.key_file = q; else if( strcmp( p, "key_pwd" ) == 0 ) opt.key_pwd = q; #if defined(MBEDTLS_USE_PSA_CRYPTO) && defined(MBEDTLS_X509_CRT_PARSE_C) else if( strcmp( p, "key_opaque" ) == 0 ) opt.key_opaque = atoi( q ); #endif #if defined(MBEDTLS_SSL_DTLS_CONNECTION_ID) else if( strcmp( p, "cid" ) == 0 ) { opt.cid_enabled = atoi( q ); if( opt.cid_enabled != 0 && opt.cid_enabled != 1 ) goto usage; } else if( strcmp( p, "cid_renego" ) == 0 ) { opt.cid_enabled_renego = atoi( q ); if( opt.cid_enabled_renego != 0 && opt.cid_enabled_renego != 1 ) goto usage; } else if( strcmp( p, "cid_val" ) == 0 ) { opt.cid_val = q; } else if( strcmp( p, "cid_val_renego" ) == 0 ) { opt.cid_val_renego = q; } #endif /* MBEDTLS_SSL_DTLS_CONNECTION_ID */ else if( strcmp( p, "psk" ) == 0 ) opt.psk = q; #if defined(MBEDTLS_USE_PSA_CRYPTO) else if( strcmp( p, "psk_opaque" ) == 0 ) opt.psk_opaque = atoi( q ); #endif #if defined(MBEDTLS_X509_TRUSTED_CERTIFICATE_CALLBACK) else if( strcmp( p, "ca_callback" ) == 0) opt.ca_callback = atoi( q ); #endif else if( strcmp( p, "psk_identity" ) == 0 ) opt.psk_identity = q; else if( strcmp( p, "ecjpake_pw" ) == 0 ) opt.ecjpake_pw = q; else if( strcmp( p, "ec_max_ops" ) == 0 ) opt.ec_max_ops = atoi( q ); else if( strcmp( p, "force_ciphersuite" ) == 0 ) { opt.force_ciphersuite[0] = mbedtls_ssl_get_ciphersuite_id( q ); if( opt.force_ciphersuite[0] == 0 ) { ret = 2; goto usage; } opt.force_ciphersuite[1] = 0; } else if( strcmp( p, "renegotiation" ) == 0 ) { opt.renegotiation = (atoi( q )) ? MBEDTLS_SSL_RENEGOTIATION_ENABLED : MBEDTLS_SSL_RENEGOTIATION_DISABLED; } else if( strcmp( p, "allow_legacy" ) == 0 ) { switch( atoi( q ) ) { case -1: opt.allow_legacy = MBEDTLS_SSL_LEGACY_BREAK_HANDSHAKE; break; case 0: opt.allow_legacy = MBEDTLS_SSL_LEGACY_NO_RENEGOTIATION; break; case 1: opt.allow_legacy = MBEDTLS_SSL_LEGACY_ALLOW_RENEGOTIATION; break; default: goto usage; } } else if( strcmp( p, "renegotiate" ) == 0 ) { opt.renegotiate = atoi( q ); if( opt.renegotiate < 0 || opt.renegotiate > 1 ) goto usage; } else if( strcmp( p, "exchanges" ) == 0 ) { opt.exchanges = atoi( q ); if( opt.exchanges < 1 ) goto usage; } else if( strcmp( p, "reconnect" ) == 0 ) { opt.reconnect = atoi( q ); if( opt.reconnect < 0 || opt.reconnect > 2 ) goto usage; } else if( strcmp( p, "reco_delay" ) == 0 ) { opt.reco_delay = atoi( q ); if( opt.reco_delay < 0 ) goto usage; } else if( strcmp( p, "reco_mode" ) == 0 ) { opt.reco_mode = atoi( q ); if( opt.reco_mode < 0 ) goto usage; } else if( strcmp( p, "reconnect_hard" ) == 0 ) { opt.reconnect_hard = atoi( q ); if( opt.reconnect_hard < 0 || opt.reconnect_hard > 1 ) goto usage; } else if( strcmp( p, "tickets" ) == 0 ) { opt.tickets = atoi( q ); if( opt.tickets < 0 || opt.tickets > 2 ) goto usage; } else if( strcmp( p, "alpn" ) == 0 ) { opt.alpn_string = q; } else if( strcmp( p, "fallback" ) == 0 ) { switch( atoi( q ) ) { case 0: opt.fallback = MBEDTLS_SSL_IS_NOT_FALLBACK; break; case 1: opt.fallback = MBEDTLS_SSL_IS_FALLBACK; break; default: goto usage; } } else if( strcmp( p, "extended_ms" ) == 0 ) { switch( atoi( q ) ) { case 0: opt.extended_ms = MBEDTLS_SSL_EXTENDED_MS_DISABLED; break; case 1: opt.extended_ms = MBEDTLS_SSL_EXTENDED_MS_ENABLED; break; default: goto usage; } } else if( strcmp( p, "curves" ) == 0 ) opt.curves = q; else if( strcmp( p, "etm" ) == 0 ) { switch( atoi( q ) ) { case 0: opt.etm = MBEDTLS_SSL_ETM_DISABLED; break; case 1: opt.etm = MBEDTLS_SSL_ETM_ENABLED; break; default: goto usage; } } else if( strcmp( p, "min_version" ) == 0 ) { if( strcmp( q, "ssl3" ) == 0 ) opt.min_version = MBEDTLS_SSL_MINOR_VERSION_0; else if( strcmp( q, "tls1" ) == 0 ) opt.min_version = MBEDTLS_SSL_MINOR_VERSION_1; else if( strcmp( q, "tls1_1" ) == 0 || strcmp( q, "dtls1" ) == 0 ) opt.min_version = MBEDTLS_SSL_MINOR_VERSION_2; else if( strcmp( q, "tls1_2" ) == 0 || strcmp( q, "dtls1_2" ) == 0 ) opt.min_version = MBEDTLS_SSL_MINOR_VERSION_3; else goto usage; } else if( strcmp( p, "max_version" ) == 0 ) { if( strcmp( q, "ssl3" ) == 0 ) opt.max_version = MBEDTLS_SSL_MINOR_VERSION_0; else if( strcmp( q, "tls1" ) == 0 ) opt.max_version = MBEDTLS_SSL_MINOR_VERSION_1; else if( strcmp( q, "tls1_1" ) == 0 || strcmp( q, "dtls1" ) == 0 ) opt.max_version = MBEDTLS_SSL_MINOR_VERSION_2; else if( strcmp( q, "tls1_2" ) == 0 || strcmp( q, "dtls1_2" ) == 0 ) opt.max_version = MBEDTLS_SSL_MINOR_VERSION_3; else goto usage; } else if( strcmp( p, "arc4" ) == 0 ) { switch( atoi( q ) ) { case 0: opt.arc4 = MBEDTLS_SSL_ARC4_DISABLED; break; case 1: opt.arc4 = MBEDTLS_SSL_ARC4_ENABLED; break; default: goto usage; } } else if( strcmp( p, "allow_sha1" ) == 0 ) { switch( atoi( q ) ) { case 0: opt.allow_sha1 = 0; break; case 1: opt.allow_sha1 = 1; break; default: goto usage; } } else if( strcmp( p, "force_version" ) == 0 ) { if( strcmp( q, "ssl3" ) == 0 ) { opt.min_version = MBEDTLS_SSL_MINOR_VERSION_0; opt.max_version = MBEDTLS_SSL_MINOR_VERSION_0; } else if( strcmp( q, "tls1" ) == 0 ) { opt.min_version = MBEDTLS_SSL_MINOR_VERSION_1; opt.max_version = MBEDTLS_SSL_MINOR_VERSION_1; } else if( strcmp( q, "tls1_1" ) == 0 ) { opt.min_version = MBEDTLS_SSL_MINOR_VERSION_2; opt.max_version = MBEDTLS_SSL_MINOR_VERSION_2; } else if( strcmp( q, "tls1_2" ) == 0 ) { opt.min_version = MBEDTLS_SSL_MINOR_VERSION_3; opt.max_version = MBEDTLS_SSL_MINOR_VERSION_3; } else if( strcmp( q, "dtls1" ) == 0 ) { opt.min_version = MBEDTLS_SSL_MINOR_VERSION_2; opt.max_version = MBEDTLS_SSL_MINOR_VERSION_2; opt.transport = MBEDTLS_SSL_TRANSPORT_DATAGRAM; } else if( strcmp( q, "dtls1_2" ) == 0 ) { opt.min_version = MBEDTLS_SSL_MINOR_VERSION_3; opt.max_version = MBEDTLS_SSL_MINOR_VERSION_3; opt.transport = MBEDTLS_SSL_TRANSPORT_DATAGRAM; } else goto usage; } else if( strcmp( p, "auth_mode" ) == 0 ) { if( strcmp( q, "none" ) == 0 ) opt.auth_mode = MBEDTLS_SSL_VERIFY_NONE; else if( strcmp( q, "optional" ) == 0 ) opt.auth_mode = MBEDTLS_SSL_VERIFY_OPTIONAL; else if( strcmp( q, "required" ) == 0 ) opt.auth_mode = MBEDTLS_SSL_VERIFY_REQUIRED; else goto usage; } else if( strcmp( p, "max_frag_len" ) == 0 ) { if( strcmp( q, "512" ) == 0 ) opt.mfl_code = MBEDTLS_SSL_MAX_FRAG_LEN_512; else if( strcmp( q, "1024" ) == 0 ) opt.mfl_code = MBEDTLS_SSL_MAX_FRAG_LEN_1024; else if( strcmp( q, "2048" ) == 0 ) opt.mfl_code = MBEDTLS_SSL_MAX_FRAG_LEN_2048; else if( strcmp( q, "4096" ) == 0 ) opt.mfl_code = MBEDTLS_SSL_MAX_FRAG_LEN_4096; else goto usage; } else if( strcmp( p, "trunc_hmac" ) == 0 ) { switch( atoi( q ) ) { case 0: opt.trunc_hmac = MBEDTLS_SSL_TRUNC_HMAC_DISABLED; break; case 1: opt.trunc_hmac = MBEDTLS_SSL_TRUNC_HMAC_ENABLED; break; default: goto usage; } } else if( strcmp( p, "hs_timeout" ) == 0 ) { if( ( p = strchr( q, '-' ) ) == NULL ) goto usage; *p++ = '\0'; opt.hs_to_min = atoi( q ); opt.hs_to_max = atoi( p ); if( opt.hs_to_min == 0 || opt.hs_to_max < opt.hs_to_min ) goto usage; } else if( strcmp( p, "mtu" ) == 0 ) { opt.dtls_mtu = atoi( q ); if( opt.dtls_mtu < 0 ) goto usage; } else if( strcmp( p, "dgram_packing" ) == 0 ) { opt.dgram_packing = atoi( q ); if( opt.dgram_packing != 0 && opt.dgram_packing != 1 ) { goto usage; } } else if( strcmp( p, "recsplit" ) == 0 ) { opt.recsplit = atoi( q ); if( opt.recsplit < 0 || opt.recsplit > 1 ) goto usage; } else if( strcmp( p, "dhmlen" ) == 0 ) { opt.dhmlen = atoi( q ); if( opt.dhmlen < 0 ) goto usage; } else if( strcmp( p, "query_config" ) == 0 ) { opt.query_config_mode = 1; query_config_ret = query_config( q ); goto exit; } else if( strcmp( p, "serialize") == 0 ) { opt.serialize = atoi( q ); if( opt.serialize < 0 || opt.serialize > 2) goto usage; } else if( strcmp( p, "context_file") == 0 ) { opt.context_file = q; } else if( strcmp( p, "eap_tls" ) == 0 ) { opt.eap_tls = atoi( q ); if( opt.eap_tls < 0 || opt.eap_tls > 1 ) goto usage; } else if( strcmp( p, "reproducible" ) == 0 ) { opt.reproducible = 1; } else if( strcmp( p, "nss_keylog" ) == 0 ) { opt.nss_keylog = atoi( q ); if( opt.nss_keylog < 0 || opt.nss_keylog > 1 ) goto usage; } else if( strcmp( p, "nss_keylog_file" ) == 0 ) { opt.nss_keylog_file = q; } else if( strcmp( p, "skip_close_notify" ) == 0 ) { opt.skip_close_notify = atoi( q ); if( opt.skip_close_notify < 0 || opt.skip_close_notify > 1 ) goto usage; } else if( strcmp( p, "use_srtp" ) == 0 ) { opt.use_srtp = atoi ( q ); } else if( strcmp( p, "srtp_force_profile" ) == 0 ) { opt.force_srtp_profile = atoi( q ); } else if( strcmp( p, "mki" ) == 0 ) { opt.mki = q; } else goto usage; } if( opt.nss_keylog != 0 && opt.eap_tls != 0 ) { mbedtls_printf( "Error: eap_tls and nss_keylog options cannot be used together.\n" ); goto usage; } /* Event-driven IO is incompatible with the above custom * receive and send functions, as the polling builds on * refers to the underlying net_context. */ if( opt.event == 1 && opt.nbio != 1 ) { mbedtls_printf( "Warning: event-driven IO mandates nbio=1 - overwrite\n" ); opt.nbio = 1; } #if defined(MBEDTLS_DEBUG_C) mbedtls_debug_set_threshold( opt.debug_level ); #endif #if defined(MBEDTLS_KEY_EXCHANGE_SOME_PSK_ENABLED) /* * Unhexify the pre-shared key if any is given */ if( strlen( opt.psk ) ) { if( mbedtls_test_unhexify( psk, sizeof( psk ), opt.psk, &psk_len ) != 0 ) { mbedtls_printf( "pre-shared key not valid\n" ); goto exit; } } #endif /* MBEDTLS_KEY_EXCHANGE_SOME_PSK_ENABLED */ #if defined(MBEDTLS_USE_PSA_CRYPTO) if( opt.psk_opaque != 0 ) { if( opt.psk == NULL ) { mbedtls_printf( "psk_opaque set but no psk to be imported specified.\n" ); ret = 2; goto usage; } if( opt.force_ciphersuite[0] <= 0 ) { mbedtls_printf( "opaque PSKs are only supported in conjunction with forcing TLS 1.2 and a PSK-only ciphersuite through the 'force_ciphersuite' option.\n" ); ret = 2; goto usage; } } #endif /* MBEDTLS_USE_PSA_CRYPTO */ if( opt.force_ciphersuite[0] > 0 ) { const mbedtls_ssl_ciphersuite_t *ciphersuite_info; ciphersuite_info = mbedtls_ssl_ciphersuite_from_id( opt.force_ciphersuite[0] ); if( opt.max_version != -1 && ciphersuite_info->min_minor_ver > opt.max_version ) { mbedtls_printf( "forced ciphersuite not allowed with this protocol version\n" ); ret = 2; goto usage; } if( opt.min_version != -1 && ciphersuite_info->max_minor_ver < opt.min_version ) { mbedtls_printf( "forced ciphersuite not allowed with this protocol version\n" ); ret = 2; goto usage; } /* If the server selects a version that's not supported by * this suite, then there will be no common ciphersuite... */ if( opt.max_version == -1 || opt.max_version > ciphersuite_info->max_minor_ver ) { opt.max_version = ciphersuite_info->max_minor_ver; } if( opt.min_version < ciphersuite_info->min_minor_ver ) { opt.min_version = ciphersuite_info->min_minor_ver; /* DTLS starts with TLS 1.1 */ if( opt.transport == MBEDTLS_SSL_TRANSPORT_DATAGRAM && opt.min_version < MBEDTLS_SSL_MINOR_VERSION_2 ) opt.min_version = MBEDTLS_SSL_MINOR_VERSION_2; } /* Enable RC4 if needed and not explicitly disabled */ if( ciphersuite_info->cipher == MBEDTLS_CIPHER_ARC4_128 ) { if( opt.arc4 == MBEDTLS_SSL_ARC4_DISABLED ) { mbedtls_printf( "forced RC4 ciphersuite with RC4 disabled\n" ); ret = 2; goto usage; } opt.arc4 = MBEDTLS_SSL_ARC4_ENABLED; } #if defined(MBEDTLS_USE_PSA_CRYPTO) if( opt.psk_opaque != 0 ) { /* Ensure that the chosen ciphersuite is PSK-only; we must know * the ciphersuite in advance to set the correct policy for the * PSK key slot. This limitation might go away in the future. */ if( ciphersuite_info->key_exchange != MBEDTLS_KEY_EXCHANGE_PSK || opt.min_version != MBEDTLS_SSL_MINOR_VERSION_3 ) { mbedtls_printf( "opaque PSKs are only supported in conjunction with forcing TLS 1.2 and a PSK-only ciphersuite through the 'force_ciphersuite' option.\n" ); ret = 2; goto usage; } /* Determine KDF algorithm the opaque PSK will be used in. */ #if defined(MBEDTLS_SHA512_C) if( ciphersuite_info->mac == MBEDTLS_MD_SHA384 ) alg = PSA_ALG_TLS12_PSK_TO_MS(PSA_ALG_SHA_384); else #endif /* MBEDTLS_SHA512_C */ alg = PSA_ALG_TLS12_PSK_TO_MS(PSA_ALG_SHA_256); } #endif /* MBEDTLS_USE_PSA_CRYPTO */ } #if defined(MBEDTLS_SSL_DTLS_CONNECTION_ID) if( mbedtls_test_unhexify( cid, sizeof( cid ), opt.cid_val, &cid_len ) != 0 ) { mbedtls_printf( "CID not valid\n" ); goto exit; } /* Keep CID settings for renegotiation unless * specified otherwise. */ if( opt.cid_enabled_renego == DFL_CID_ENABLED_RENEGO ) opt.cid_enabled_renego = opt.cid_enabled; if( opt.cid_val_renego == DFL_CID_VALUE_RENEGO ) opt.cid_val_renego = opt.cid_val; if( mbedtls_test_unhexify( cid_renego, sizeof( cid_renego ), opt.cid_val_renego, &cid_renego_len ) != 0 ) { mbedtls_printf( "CID not valid\n" ); goto exit; } #endif /* MBEDTLS_SSL_DTLS_CONNECTION_ID */ #if defined(MBEDTLS_ECP_C) if( opt.curves != NULL ) { p = (char *) opt.curves; i = 0; if( strcmp( p, "none" ) == 0 ) { curve_list[0] = MBEDTLS_ECP_DP_NONE; } else if( strcmp( p, "default" ) != 0 ) { /* Leave room for a final NULL in curve list */ while( i < CURVE_LIST_SIZE - 1 && *p != '\0' ) { q = p; /* Terminate the current string */ while( *p != ',' && *p != '\0' ) p++; if( *p == ',' ) *p++ = '\0'; if( ( curve_cur = mbedtls_ecp_curve_info_from_name( q ) ) != NULL ) { curve_list[i++] = curve_cur->grp_id; } else { mbedtls_printf( "unknown curve %s\n", q ); mbedtls_printf( "supported curves: " ); for( curve_cur = mbedtls_ecp_curve_list(); curve_cur->grp_id != MBEDTLS_ECP_DP_NONE; curve_cur++ ) { mbedtls_printf( "%s ", curve_cur->name ); } mbedtls_printf( "\n" ); goto exit; } } mbedtls_printf("Number of curves: %d\n", i ); if( i == CURVE_LIST_SIZE - 1 && *p != '\0' ) { mbedtls_printf( "curves list too long, maximum %d", CURVE_LIST_SIZE - 1 ); goto exit; } curve_list[i] = MBEDTLS_ECP_DP_NONE; } } #endif /* MBEDTLS_ECP_C */ #if defined(MBEDTLS_SSL_ALPN) if( opt.alpn_string != NULL ) { p = (char *) opt.alpn_string; i = 0; /* Leave room for a final NULL in alpn_list */ while( i < ALPN_LIST_SIZE - 1 && *p != '\0' ) { alpn_list[i++] = p; /* Terminate the current string and move on to next one */ while( *p != ',' && *p != '\0' ) p++; if( *p == ',' ) *p++ = '\0'; } } #endif /* MBEDTLS_SSL_ALPN */ /* * 0. Initialize the RNG and the session data */ mbedtls_printf( "\n . Seeding the random number generator..." ); fflush( stdout ); ret = rng_seed( &rng, opt.reproducible, pers ); if( ret != 0 ) goto exit; mbedtls_printf( " ok\n" ); #if defined(MBEDTLS_X509_CRT_PARSE_C) /* * 1.1. Load the trusted CA */ mbedtls_printf( " . Loading the CA root certificate ..." ); fflush( stdout ); if( strcmp( opt.ca_path, "none" ) == 0 || strcmp( opt.ca_file, "none" ) == 0 ) { ret = 0; } else #if defined(MBEDTLS_FS_IO) if( strlen( opt.ca_path ) ) ret = mbedtls_x509_crt_parse_path( &cacert, opt.ca_path ); else if( strlen( opt.ca_file ) ) ret = mbedtls_x509_crt_parse_file( &cacert, opt.ca_file ); else #endif #if defined(MBEDTLS_CERTS_C) { #if defined(MBEDTLS_PEM_PARSE_C) for( i = 0; mbedtls_test_cas[i] != NULL; i++ ) { ret = mbedtls_x509_crt_parse( &cacert, (const unsigned char *) mbedtls_test_cas[i], mbedtls_test_cas_len[i] ); if( ret != 0 ) break; } if( ret == 0 ) #endif /* MBEDTLS_PEM_PARSE_C */ for( i = 0; mbedtls_test_cas_der[i] != NULL; i++ ) { ret = mbedtls_x509_crt_parse_der( &cacert, (const unsigned char *) mbedtls_test_cas_der[i], mbedtls_test_cas_der_len[i] ); if( ret != 0 ) break; } } #else { ret = 1; mbedtls_printf( "MBEDTLS_CERTS_C not defined." ); } #endif /* MBEDTLS_CERTS_C */ if( ret < 0 ) { mbedtls_printf( " failed\n ! mbedtls_x509_crt_parse returned -0x%x\n\n", (unsigned int) -ret ); goto exit; } mbedtls_printf( " ok (%d skipped)\n", ret ); /* * 1.2. Load own certificate and private key * * (can be skipped if client authentication is not required) */ mbedtls_printf( " . Loading the client cert. and key..." ); fflush( stdout ); if( strcmp( opt.crt_file, "none" ) == 0 ) ret = 0; else #if defined(MBEDTLS_FS_IO) if( strlen( opt.crt_file ) ) ret = mbedtls_x509_crt_parse_file( &clicert, opt.crt_file ); else #endif #if defined(MBEDTLS_CERTS_C) ret = mbedtls_x509_crt_parse( &clicert, (const unsigned char *) mbedtls_test_cli_crt, mbedtls_test_cli_crt_len ); #else { ret = 1; mbedtls_printf( "MBEDTLS_CERTS_C not defined." ); } #endif if( ret != 0 ) { mbedtls_printf( " failed\n ! mbedtls_x509_crt_parse returned -0x%x\n\n", (unsigned int) -ret ); goto exit; } if( strcmp( opt.key_file, "none" ) == 0 ) ret = 0; else #if defined(MBEDTLS_FS_IO) if( strlen( opt.key_file ) ) ret = mbedtls_pk_parse_keyfile( &pkey, opt.key_file, opt.key_pwd ); else #endif #if defined(MBEDTLS_CERTS_C) ret = mbedtls_pk_parse_key( &pkey, (const unsigned char *) mbedtls_test_cli_key, mbedtls_test_cli_key_len, NULL, 0 ); #else { ret = 1; mbedtls_printf( "MBEDTLS_CERTS_C not defined." ); } #endif if( ret != 0 ) { mbedtls_printf( " failed\n ! mbedtls_pk_parse_key returned -0x%x\n\n", (unsigned int) -ret ); goto exit; } #if defined(MBEDTLS_USE_PSA_CRYPTO) if( opt.key_opaque != 0 ) { if( ( ret = mbedtls_pk_wrap_as_opaque( &pkey, &key_slot, PSA_ALG_SHA_256 ) ) != 0 ) { mbedtls_printf( " failed\n ! " "mbedtls_pk_wrap_as_opaque returned -0x%x\n\n", (unsigned int) -ret ); goto exit; } } #endif /* MBEDTLS_USE_PSA_CRYPTO */ mbedtls_printf( " ok (key type: %s)\n", mbedtls_pk_get_name( &pkey ) ); #endif /* MBEDTLS_X509_CRT_PARSE_C */ /* * 2. Start the connection */ if( opt.server_addr == NULL) opt.server_addr = opt.server_name; mbedtls_printf( " . Connecting to %s/%s/%s...", opt.transport == MBEDTLS_SSL_TRANSPORT_STREAM ? "tcp" : "udp", opt.server_addr, opt.server_port ); fflush( stdout ); if( ( ret = mbedtls_net_connect( &server_fd, opt.server_addr, opt.server_port, opt.transport == MBEDTLS_SSL_TRANSPORT_STREAM ? MBEDTLS_NET_PROTO_TCP : MBEDTLS_NET_PROTO_UDP ) ) != 0 ) { mbedtls_printf( " failed\n ! mbedtls_net_connect returned -0x%x\n\n", (unsigned int) -ret ); goto exit; } if( opt.nbio > 0 ) ret = mbedtls_net_set_nonblock( &server_fd ); else ret = mbedtls_net_set_block( &server_fd ); if( ret != 0 ) { mbedtls_printf( " failed\n ! net_set_(non)block() returned -0x%x\n\n", (unsigned int) -ret ); goto exit; } mbedtls_printf( " ok\n" ); /* * 3. Setup stuff */ mbedtls_printf( " . Setting up the SSL/TLS structure..." ); fflush( stdout ); if( ( ret = mbedtls_ssl_config_defaults( &conf, MBEDTLS_SSL_IS_CLIENT, opt.transport, MBEDTLS_SSL_PRESET_DEFAULT ) ) != 0 ) { mbedtls_printf( " failed\n ! mbedtls_ssl_config_defaults returned -0x%x\n\n", (unsigned int) -ret ); goto exit; } #if defined(MBEDTLS_X509_CRT_PARSE_C) /* The default algorithms profile disables SHA-1, but our tests still rely on it heavily. */ if( opt.allow_sha1 > 0 ) { crt_profile_for_test.allowed_mds |= MBEDTLS_X509_ID_FLAG( MBEDTLS_MD_SHA1 ); mbedtls_ssl_conf_cert_profile( &conf, &crt_profile_for_test ); mbedtls_ssl_conf_sig_hashes( &conf, ssl_sig_hashes_for_test ); } if( opt.context_crt_cb == 0 ) mbedtls_ssl_conf_verify( &conf, my_verify, NULL ); memset( peer_crt_info, 0, sizeof( peer_crt_info ) ); #endif /* MBEDTLS_X509_CRT_PARSE_C */ #if defined(MBEDTLS_SSL_DTLS_CONNECTION_ID) if( opt.cid_enabled == 1 || opt.cid_enabled_renego == 1 ) { if( opt.cid_enabled == 1 && opt.cid_enabled_renego == 1 && cid_len != cid_renego_len ) { mbedtls_printf( "CID length must not change during renegotiation\n" ); goto usage; } if( opt.cid_enabled == 1 ) ret = mbedtls_ssl_conf_cid( &conf, cid_len, MBEDTLS_SSL_UNEXPECTED_CID_IGNORE ); else ret = mbedtls_ssl_conf_cid( &conf, cid_renego_len, MBEDTLS_SSL_UNEXPECTED_CID_IGNORE ); if( ret != 0 ) { mbedtls_printf( " failed\n ! mbedtls_ssl_conf_cid_len returned -%#04x\n\n", (unsigned int) -ret ); goto exit; } } #endif /* MBEDTLS_SSL_DTLS_CONNECTION_ID */ if( opt.auth_mode != DFL_AUTH_MODE ) mbedtls_ssl_conf_authmode( &conf, opt.auth_mode ); #if defined(MBEDTLS_SSL_PROTO_DTLS) if( opt.hs_to_min != DFL_HS_TO_MIN || opt.hs_to_max != DFL_HS_TO_MAX ) mbedtls_ssl_conf_handshake_timeout( &conf, opt.hs_to_min, opt.hs_to_max ); if( opt.dgram_packing != DFL_DGRAM_PACKING ) mbedtls_ssl_set_datagram_packing( &ssl, opt.dgram_packing ); #endif /* MBEDTLS_SSL_PROTO_DTLS */ #if defined(MBEDTLS_SSL_MAX_FRAGMENT_LENGTH) if( ( ret = mbedtls_ssl_conf_max_frag_len( &conf, opt.mfl_code ) ) != 0 ) { mbedtls_printf( " failed\n ! mbedtls_ssl_conf_max_frag_len returned %d\n\n", ret ); goto exit; } #endif #if defined(MBEDTLS_SSL_DTLS_SRTP) const mbedtls_ssl_srtp_profile forced_profile[] = { opt.force_srtp_profile, MBEDTLS_TLS_SRTP_UNSET }; if( opt.use_srtp == 1 ) { if( opt.force_srtp_profile != 0 ) { ret = mbedtls_ssl_conf_dtls_srtp_protection_profiles ( &conf, forced_profile ); } else { ret = mbedtls_ssl_conf_dtls_srtp_protection_profiles ( &conf, default_profiles ); } if( ret != 0 ) { mbedtls_printf( " failed\n ! " "mbedtls_ssl_conf_dtls_srtp_protection_profiles returned %d\n\n", ret ); goto exit; } } else if( opt.force_srtp_profile != 0 ) { mbedtls_printf( " failed\n ! must enable use_srtp to force srtp profile\n\n" ); goto exit; } #endif /* MBEDTLS_SSL_DTLS_SRTP */ #if defined(MBEDTLS_SSL_TRUNCATED_HMAC) if( opt.trunc_hmac != DFL_TRUNC_HMAC ) mbedtls_ssl_conf_truncated_hmac( &conf, opt.trunc_hmac ); #endif #if defined(MBEDTLS_SSL_EXTENDED_MASTER_SECRET) if( opt.extended_ms != DFL_EXTENDED_MS ) mbedtls_ssl_conf_extended_master_secret( &conf, opt.extended_ms ); #endif #if defined(MBEDTLS_SSL_ENCRYPT_THEN_MAC) if( opt.etm != DFL_ETM ) mbedtls_ssl_conf_encrypt_then_mac( &conf, opt.etm ); #endif #if defined(MBEDTLS_SSL_EXPORT_KEYS) if( opt.eap_tls != 0 ) { mbedtls_ssl_conf_export_keys_ext_cb( &conf, eap_tls_key_derivation, &eap_tls_keying ); } else if( opt.nss_keylog != 0 ) { mbedtls_ssl_conf_export_keys_ext_cb( &conf, nss_keylog_export, NULL ); } #if defined( MBEDTLS_SSL_DTLS_SRTP ) else if( opt.use_srtp != 0 ) { mbedtls_ssl_conf_export_keys_ext_cb( &conf, dtls_srtp_key_derivation, &dtls_srtp_keying ); } #endif /* MBEDTLS_SSL_DTLS_SRTP */ #endif /* MBEDTLS_SSL_EXPORT_KEYS */ #if defined(MBEDTLS_SSL_CBC_RECORD_SPLITTING) if( opt.recsplit != DFL_RECSPLIT ) mbedtls_ssl_conf_cbc_record_splitting( &conf, opt.recsplit ? MBEDTLS_SSL_CBC_RECORD_SPLITTING_ENABLED : MBEDTLS_SSL_CBC_RECORD_SPLITTING_DISABLED ); #endif #if defined(MBEDTLS_DHM_C) if( opt.dhmlen != DFL_DHMLEN ) mbedtls_ssl_conf_dhm_min_bitlen( &conf, opt.dhmlen ); #endif #if defined(MBEDTLS_SSL_ALPN) if( opt.alpn_string != NULL ) if( ( ret = mbedtls_ssl_conf_alpn_protocols( &conf, alpn_list ) ) != 0 ) { mbedtls_printf( " failed\n ! mbedtls_ssl_conf_alpn_protocols returned %d\n\n", ret ); goto exit; } #endif if (opt.reproducible) { #if defined(MBEDTLS_HAVE_TIME) #if defined(MBEDTLS_PLATFORM_TIME_ALT) mbedtls_platform_set_time( dummy_constant_time ); #else fprintf( stderr, "Warning: reproducible option used without constant time\n" ); #endif #endif /* MBEDTLS_HAVE_TIME */ } mbedtls_ssl_conf_rng( &conf, rng_get, &rng ); mbedtls_ssl_conf_dbg( &conf, my_debug, stdout ); mbedtls_ssl_conf_read_timeout( &conf, opt.read_timeout ); #if defined(MBEDTLS_SSL_SESSION_TICKETS) mbedtls_ssl_conf_session_tickets( &conf, opt.tickets ); #endif if( opt.force_ciphersuite[0] != DFL_FORCE_CIPHER ) mbedtls_ssl_conf_ciphersuites( &conf, opt.force_ciphersuite ); #if defined(MBEDTLS_ARC4_C) if( opt.arc4 != DFL_ARC4 ) mbedtls_ssl_conf_arc4_support( &conf, opt.arc4 ); #endif if( opt.allow_legacy != DFL_ALLOW_LEGACY ) mbedtls_ssl_conf_legacy_renegotiation( &conf, opt.allow_legacy ); #if defined(MBEDTLS_SSL_RENEGOTIATION) mbedtls_ssl_conf_renegotiation( &conf, opt.renegotiation ); #endif #if defined(MBEDTLS_X509_CRT_PARSE_C) if( strcmp( opt.ca_path, "none" ) != 0 && strcmp( opt.ca_file, "none" ) != 0 ) { #if defined(MBEDTLS_X509_TRUSTED_CERTIFICATE_CALLBACK) if( opt.ca_callback != 0 ) mbedtls_ssl_conf_ca_cb( &conf, ca_callback, &cacert ); else #endif mbedtls_ssl_conf_ca_chain( &conf, &cacert, NULL ); } if( strcmp( opt.crt_file, "none" ) != 0 && strcmp( opt.key_file, "none" ) != 0 ) { if( ( ret = mbedtls_ssl_conf_own_cert( &conf, &clicert, &pkey ) ) != 0 ) { mbedtls_printf( " failed\n ! mbedtls_ssl_conf_own_cert returned %d\n\n", ret ); goto exit; } } #endif /* MBEDTLS_X509_CRT_PARSE_C */ #if defined(MBEDTLS_ECP_C) if( opt.curves != NULL && strcmp( opt.curves, "default" ) != 0 ) { mbedtls_ssl_conf_curves( &conf, curve_list ); } #endif #if defined(MBEDTLS_KEY_EXCHANGE_SOME_PSK_ENABLED) #if defined(MBEDTLS_USE_PSA_CRYPTO) if( opt.psk_opaque != 0 ) { key_attributes = psa_key_attributes_init(); psa_set_key_usage_flags( &key_attributes, PSA_KEY_USAGE_DERIVE ); psa_set_key_algorithm( &key_attributes, alg ); psa_set_key_type( &key_attributes, PSA_KEY_TYPE_DERIVE ); status = psa_import_key( &key_attributes, psk, psk_len, &slot ); if( status != PSA_SUCCESS ) { ret = MBEDTLS_ERR_SSL_HW_ACCEL_FAILED; goto exit; } if( ( ret = mbedtls_ssl_conf_psk_opaque( &conf, slot, (const unsigned char *) opt.psk_identity, strlen( opt.psk_identity ) ) ) != 0 ) { mbedtls_printf( " failed\n ! mbedtls_ssl_conf_psk_opaque returned %d\n\n", ret ); goto exit; } } else #endif /* MBEDTLS_USE_PSA_CRYPTO */ if( psk_len > 0 ) { ret = mbedtls_ssl_conf_psk( &conf, psk, psk_len, (const unsigned char *) opt.psk_identity, strlen( opt.psk_identity ) ); if( ret != 0 ) { mbedtls_printf( " failed\n ! mbedtls_ssl_conf_psk returned %d\n\n", ret ); goto exit; } } #endif /* MBEDTLS_KEY_EXCHANGE_SOME_PSK_ENABLED */ if( opt.min_version != DFL_MIN_VERSION ) mbedtls_ssl_conf_min_version( &conf, MBEDTLS_SSL_MAJOR_VERSION_3, opt.min_version ); if( opt.max_version != DFL_MAX_VERSION ) mbedtls_ssl_conf_max_version( &conf, MBEDTLS_SSL_MAJOR_VERSION_3, opt.max_version ); #if defined(MBEDTLS_SSL_FALLBACK_SCSV) if( opt.fallback != DFL_FALLBACK ) mbedtls_ssl_conf_fallback( &conf, opt.fallback ); #endif if( ( ret = mbedtls_ssl_setup( &ssl, &conf ) ) != 0 ) { mbedtls_printf( " failed\n ! mbedtls_ssl_setup returned -0x%x\n\n", (unsigned int) -ret ); goto exit; } #if defined(MBEDTLS_X509_CRT_PARSE_C) if( ( ret = mbedtls_ssl_set_hostname( &ssl, opt.server_name ) ) != 0 ) { mbedtls_printf( " failed\n ! mbedtls_ssl_set_hostname returned %d\n\n", ret ); goto exit; } #endif #if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED) if( opt.ecjpake_pw != DFL_ECJPAKE_PW ) { if( ( ret = mbedtls_ssl_set_hs_ecjpake_password( &ssl, (const unsigned char *) opt.ecjpake_pw, strlen( opt.ecjpake_pw ) ) ) != 0 ) { mbedtls_printf( " failed\n ! mbedtls_ssl_set_hs_ecjpake_password returned %d\n\n", ret ); goto exit; } } #endif #if defined(MBEDTLS_X509_CRT_PARSE_C) if( opt.context_crt_cb == 1 ) mbedtls_ssl_set_verify( &ssl, my_verify, NULL ); #endif /* MBEDTLS_X509_CRT_PARSE_C */ io_ctx.ssl = &ssl; io_ctx.net = &server_fd; mbedtls_ssl_set_bio( &ssl, &io_ctx, send_cb, recv_cb, opt.nbio == 0 ? recv_timeout_cb : NULL ); #if defined(MBEDTLS_SSL_DTLS_CONNECTION_ID) if( opt.transport == MBEDTLS_SSL_TRANSPORT_DATAGRAM ) { if( ( ret = mbedtls_ssl_set_cid( &ssl, opt.cid_enabled, cid, cid_len ) ) != 0 ) { mbedtls_printf( " failed\n ! mbedtls_ssl_set_cid returned %d\n\n", ret ); goto exit; } } #endif /* MBEDTLS_SSL_DTLS_CONNECTION_ID */ #if defined(MBEDTLS_SSL_PROTO_DTLS) if( opt.dtls_mtu != DFL_DTLS_MTU ) mbedtls_ssl_set_mtu( &ssl, opt.dtls_mtu ); #endif #if defined(MBEDTLS_TIMING_C) mbedtls_ssl_set_timer_cb( &ssl, &timer, mbedtls_timing_set_delay, mbedtls_timing_get_delay ); #endif #if defined(MBEDTLS_ECP_RESTARTABLE) if( opt.ec_max_ops != DFL_EC_MAX_OPS ) mbedtls_ecp_set_max_ops( opt.ec_max_ops ); #endif #if defined(MBEDTLS_SSL_DTLS_SRTP) if( opt.use_srtp != 0 && strlen( opt.mki ) != 0 ) { if( mbedtls_test_unhexify( mki, sizeof( mki ), opt.mki,&mki_len ) != 0 ) { mbedtls_printf( "mki value not valid hex\n" ); goto exit; } mbedtls_ssl_conf_srtp_mki_value_supported( &conf, MBEDTLS_SSL_DTLS_SRTP_MKI_SUPPORTED ); if( ( ret = mbedtls_ssl_dtls_srtp_set_mki_value( &ssl, mki, (uint16_t) strlen( opt.mki ) / 2 ) ) != 0 ) { mbedtls_printf( " failed\n ! mbedtls_ssl_dtls_srtp_set_mki_value returned %d\n\n", ret ); goto exit; } } #endif mbedtls_printf( " ok\n" ); /* * 4. Handshake */ mbedtls_printf( " . Performing the SSL/TLS handshake..." ); fflush( stdout ); while( ( ret = mbedtls_ssl_handshake( &ssl ) ) != 0 ) { if( ret != MBEDTLS_ERR_SSL_WANT_READ && ret != MBEDTLS_ERR_SSL_WANT_WRITE && ret != MBEDTLS_ERR_SSL_CRYPTO_IN_PROGRESS ) { mbedtls_printf( " failed\n ! mbedtls_ssl_handshake returned -0x%x\n", (unsigned int) -ret ); if( ret == MBEDTLS_ERR_X509_CERT_VERIFY_FAILED ) mbedtls_printf( " Unable to verify the server's certificate. " "Either it is invalid,\n" " or you didn't set ca_file or ca_path " "to an appropriate value.\n" " Alternatively, you may want to use " "auth_mode=optional for testing purposes.\n" ); mbedtls_printf( "\n" ); goto exit; } #if defined(MBEDTLS_ECP_RESTARTABLE) if( ret == MBEDTLS_ERR_SSL_CRYPTO_IN_PROGRESS ) continue; #endif /* For event-driven IO, wait for socket to become available */ if( opt.event == 1 /* level triggered IO */ ) { #if defined(MBEDTLS_TIMING_C) ret = idle( &server_fd, &timer, ret ); #else ret = idle( &server_fd, ret ); #endif if( ret != 0 ) goto exit; } } mbedtls_printf( " ok\n [ Protocol is %s ]\n [ Ciphersuite is %s ]\n", mbedtls_ssl_get_version( &ssl ), mbedtls_ssl_get_ciphersuite( &ssl ) ); if( ( ret = mbedtls_ssl_get_record_expansion( &ssl ) ) >= 0 ) mbedtls_printf( " [ Record expansion is %d ]\n", ret ); else mbedtls_printf( " [ Record expansion is unknown (compression) ]\n" ); #if defined(MBEDTLS_SSL_MAX_FRAGMENT_LENGTH) mbedtls_printf( " [ Maximum input fragment length is %u ]\n", (unsigned int) mbedtls_ssl_get_input_max_frag_len( &ssl ) ); mbedtls_printf( " [ Maximum output fragment length is %u ]\n", (unsigned int) mbedtls_ssl_get_output_max_frag_len( &ssl ) ); #endif #if defined(MBEDTLS_SSL_ALPN) if( opt.alpn_string != NULL ) { const char *alp = mbedtls_ssl_get_alpn_protocol( &ssl ); mbedtls_printf( " [ Application Layer Protocol is %s ]\n", alp ? alp : "(none)" ); } #endif #if defined(MBEDTLS_SSL_EXPORT_KEYS) if( opt.eap_tls != 0 ) { size_t j = 0; if( ( ret = mbedtls_ssl_tls_prf( eap_tls_keying.tls_prf_type, eap_tls_keying.master_secret, sizeof( eap_tls_keying.master_secret ), eap_tls_label, eap_tls_keying.randbytes, sizeof( eap_tls_keying.randbytes ), eap_tls_keymaterial, sizeof( eap_tls_keymaterial ) ) ) != 0 ) { mbedtls_printf( " failed\n ! mbedtls_ssl_tls_prf returned -0x%x\n\n", (unsigned int) -ret ); goto exit; } mbedtls_printf( " EAP-TLS key material is:" ); for( j = 0; j < sizeof( eap_tls_keymaterial ); j++ ) { if( j % 8 == 0 ) mbedtls_printf("\n "); mbedtls_printf("%02x ", eap_tls_keymaterial[j] ); } mbedtls_printf("\n"); if( ( ret = mbedtls_ssl_tls_prf( eap_tls_keying.tls_prf_type, NULL, 0, eap_tls_label, eap_tls_keying.randbytes, sizeof( eap_tls_keying.randbytes ), eap_tls_iv, sizeof( eap_tls_iv ) ) ) != 0 ) { mbedtls_printf( " failed\n ! mbedtls_ssl_tls_prf returned -0x%x\n\n", (unsigned int) -ret ); goto exit; } mbedtls_printf( " EAP-TLS IV is:" ); for( j = 0; j < sizeof( eap_tls_iv ); j++ ) { if( j % 8 == 0 ) mbedtls_printf("\n "); mbedtls_printf("%02x ", eap_tls_iv[j] ); } mbedtls_printf("\n"); } #if defined( MBEDTLS_SSL_DTLS_SRTP ) else if( opt.use_srtp != 0 ) { size_t j = 0; mbedtls_dtls_srtp_info dtls_srtp_negotiation_result; mbedtls_ssl_get_dtls_srtp_negotiation_result( &ssl, &dtls_srtp_negotiation_result ); if( dtls_srtp_negotiation_result.chosen_dtls_srtp_profile == MBEDTLS_TLS_SRTP_UNSET ) { mbedtls_printf( " Unable to negotiate " "the use of DTLS-SRTP\n" ); } else { if( ( ret = mbedtls_ssl_tls_prf( dtls_srtp_keying.tls_prf_type, dtls_srtp_keying.master_secret, sizeof( dtls_srtp_keying.master_secret ), dtls_srtp_label, dtls_srtp_keying.randbytes, sizeof( dtls_srtp_keying.randbytes ), dtls_srtp_key_material, sizeof( dtls_srtp_key_material ) ) ) != 0 ) { mbedtls_printf( " failed\n ! mbedtls_ssl_tls_prf returned -0x%x\n\n", (unsigned int) -ret ); goto exit; } mbedtls_printf( " DTLS-SRTP key material is:" ); for( j = 0; j < sizeof( dtls_srtp_key_material ); j++ ) { if( j % 8 == 0 ) mbedtls_printf( "\n " ); mbedtls_printf( "%02x ", dtls_srtp_key_material[j] ); } mbedtls_printf( "\n" ); /* produce a less readable output used to perform automatic checks * - compare client and server output * - interop test with openssl which client produces this kind of output */ mbedtls_printf( " Keying material: " ); for( j = 0; j < sizeof( dtls_srtp_key_material ); j++ ) { mbedtls_printf( "%02X", dtls_srtp_key_material[j] ); } mbedtls_printf( "\n" ); if ( dtls_srtp_negotiation_result.mki_len > 0 ) { mbedtls_printf( " DTLS-SRTP mki value: " ); for( j = 0; j < dtls_srtp_negotiation_result.mki_len; j++ ) { mbedtls_printf( "%02X", dtls_srtp_negotiation_result.mki_value[j] ); } } else { mbedtls_printf( " DTLS-SRTP no mki value negotiated" ); } mbedtls_printf( "\n" ); } } #endif /* MBEDTLS_SSL_DTLS_SRTP */ #endif /* MBEDTLS_SSL_EXPORT_KEYS */ if( opt.reconnect != 0 ) { mbedtls_printf(" . Saving session for reuse..." ); fflush( stdout ); if( opt.reco_mode == 1 ) { /* free any previously saved data */ if( session_data != NULL ) { mbedtls_platform_zeroize( session_data, session_data_len ); mbedtls_free( session_data ); session_data = NULL; } /* get size of the buffer needed */ mbedtls_ssl_session_save( mbedtls_ssl_get_session_pointer( &ssl ), NULL, 0, &session_data_len ); session_data = mbedtls_calloc( 1, session_data_len ); if( session_data == NULL ) { mbedtls_printf( " failed\n ! alloc %u bytes for session data\n", (unsigned) session_data_len ); ret = MBEDTLS_ERR_SSL_ALLOC_FAILED; goto exit; } /* actually save session data */ if( ( ret = mbedtls_ssl_session_save( mbedtls_ssl_get_session_pointer( &ssl ), session_data, session_data_len, &session_data_len ) ) != 0 ) { mbedtls_printf( " failed\n ! mbedtls_ssl_session_saved returned -0x%04x\n\n", (unsigned int) -ret ); goto exit; } } else { if( ( ret = mbedtls_ssl_get_session( &ssl, &saved_session ) ) != 0 ) { mbedtls_printf( " failed\n ! mbedtls_ssl_get_session returned -0x%x\n\n", (unsigned int) -ret ); goto exit; } } mbedtls_printf( " ok\n" ); if( opt.reco_mode == 1 ) { mbedtls_printf( " [ Saved %u bytes of session data]\n", (unsigned) session_data_len ); } } #if defined(MBEDTLS_X509_CRT_PARSE_C) /* * 5. Verify the server certificate */ mbedtls_printf( " . Verifying peer X.509 certificate..." ); if( ( flags = mbedtls_ssl_get_verify_result( &ssl ) ) != 0 ) { char vrfy_buf[512]; mbedtls_printf( " failed\n" ); mbedtls_x509_crt_verify_info( vrfy_buf, sizeof( vrfy_buf ), " ! ", flags ); mbedtls_printf( "%s\n", vrfy_buf ); } else mbedtls_printf( " ok\n" ); mbedtls_printf( " . Peer certificate information ...\n" ); mbedtls_printf( "%s\n", peer_crt_info ); #endif /* MBEDTLS_X509_CRT_PARSE_C */ #if defined(MBEDTLS_SSL_DTLS_CONNECTION_ID) ret = report_cid_usage( &ssl, "initial handshake" ); if( ret != 0 ) goto exit; if( opt.transport == MBEDTLS_SSL_TRANSPORT_DATAGRAM ) { if( ( ret = mbedtls_ssl_set_cid( &ssl, opt.cid_enabled_renego, cid_renego, cid_renego_len ) ) != 0 ) { mbedtls_printf( " failed\n ! mbedtls_ssl_set_cid returned %d\n\n", ret ); goto exit; } } #endif /* MBEDTLS_SSL_DTLS_CONNECTION_ID */ #if defined(MBEDTLS_SSL_RENEGOTIATION) if( opt.renegotiate ) { /* * Perform renegotiation (this must be done when the server is waiting * for input from our side). */ mbedtls_printf( " . Performing renegotiation..." ); fflush( stdout ); while( ( ret = mbedtls_ssl_renegotiate( &ssl ) ) != 0 ) { if( ret != MBEDTLS_ERR_SSL_WANT_READ && ret != MBEDTLS_ERR_SSL_WANT_WRITE && ret != MBEDTLS_ERR_SSL_CRYPTO_IN_PROGRESS ) { mbedtls_printf( " failed\n ! mbedtls_ssl_renegotiate returned %d\n\n", ret ); goto exit; } #if defined(MBEDTLS_ECP_RESTARTABLE) if( ret == MBEDTLS_ERR_SSL_CRYPTO_IN_PROGRESS ) continue; #endif /* For event-driven IO, wait for socket to become available */ if( opt.event == 1 /* level triggered IO */ ) { #if defined(MBEDTLS_TIMING_C) idle( &server_fd, &timer, ret ); #else idle( &server_fd, ret ); #endif } } mbedtls_printf( " ok\n" ); } #endif /* MBEDTLS_SSL_RENEGOTIATION */ #if defined(MBEDTLS_SSL_DTLS_CONNECTION_ID) ret = report_cid_usage( &ssl, "after renegotiation" ); if( ret != 0 ) goto exit; #endif /* MBEDTLS_SSL_DTLS_CONNECTION_ID */ /* * 6. Write the GET request */ retry_left = opt.max_resend; send_request: mbedtls_printf( " > Write to server:" ); fflush( stdout ); len = mbedtls_snprintf( (char *) buf, sizeof( buf ) - 1, GET_REQUEST, opt.request_page ); tail_len = (int) strlen( GET_REQUEST_END ); /* Add padding to GET request to reach opt.request_size in length */ if( opt.request_size != DFL_REQUEST_SIZE && len + tail_len < opt.request_size ) { memset( buf + len, 'A', opt.request_size - len - tail_len ); len += opt.request_size - len - tail_len; } strncpy( (char *) buf + len, GET_REQUEST_END, sizeof( buf ) - len - 1 ); len += tail_len; /* Truncate if request size is smaller than the "natural" size */ if( opt.request_size != DFL_REQUEST_SIZE && len > opt.request_size ) { len = opt.request_size; /* Still end with \r\n unless that's really not possible */ if( len >= 2 ) buf[len - 2] = '\r'; if( len >= 1 ) buf[len - 1] = '\n'; } if( opt.transport == MBEDTLS_SSL_TRANSPORT_STREAM ) { written = 0; frags = 0; do { while( ( ret = mbedtls_ssl_write( &ssl, buf + written, len - written ) ) < 0 ) { if( ret != MBEDTLS_ERR_SSL_WANT_READ && ret != MBEDTLS_ERR_SSL_WANT_WRITE && ret != MBEDTLS_ERR_SSL_CRYPTO_IN_PROGRESS ) { mbedtls_printf( " failed\n ! mbedtls_ssl_write returned -0x%x\n\n", (unsigned int) -ret ); goto exit; } /* For event-driven IO, wait for socket to become available */ if( opt.event == 1 /* level triggered IO */ ) { #if defined(MBEDTLS_TIMING_C) idle( &server_fd, &timer, ret ); #else idle( &server_fd, ret ); #endif } } frags++; written += ret; } while( written < len ); } else /* Not stream, so datagram */ { while( 1 ) { ret = mbedtls_ssl_write( &ssl, buf, len ); #if defined(MBEDTLS_ECP_RESTARTABLE) if( ret == MBEDTLS_ERR_SSL_CRYPTO_IN_PROGRESS ) continue; #endif if( ret != MBEDTLS_ERR_SSL_WANT_READ && ret != MBEDTLS_ERR_SSL_WANT_WRITE ) break; /* For event-driven IO, wait for socket to become available */ if( opt.event == 1 /* level triggered IO */ ) { #if defined(MBEDTLS_TIMING_C) idle( &server_fd, &timer, ret ); #else idle( &server_fd, ret ); #endif } } if( ret < 0 ) { mbedtls_printf( " failed\n ! mbedtls_ssl_write returned %d\n\n", ret ); goto exit; } frags = 1; written = ret; if( written < len ) { mbedtls_printf( " warning\n ! request didn't fit into single datagram and " "was truncated to size %u", (unsigned) written ); } } buf[written] = '\0'; mbedtls_printf( " %d bytes written in %d fragments\n\n%s\n", written, frags, (char *) buf ); /* Send a non-empty request if request_size == 0 */ if ( len == 0 ) { opt.request_size = DFL_REQUEST_SIZE; goto send_request; } /* * 7. Read the HTTP response */ mbedtls_printf( " < Read from server:" ); fflush( stdout ); /* * TLS and DTLS need different reading styles (stream vs datagram) */ if( opt.transport == MBEDTLS_SSL_TRANSPORT_STREAM ) { do { len = sizeof( buf ) - 1; memset( buf, 0, sizeof( buf ) ); ret = mbedtls_ssl_read( &ssl, buf, len ); #if defined(MBEDTLS_ECP_RESTARTABLE) if( ret == MBEDTLS_ERR_SSL_CRYPTO_IN_PROGRESS ) continue; #endif if( ret == MBEDTLS_ERR_SSL_WANT_READ || ret == MBEDTLS_ERR_SSL_WANT_WRITE ) { /* For event-driven IO, wait for socket to become available */ if( opt.event == 1 /* level triggered IO */ ) { #if defined(MBEDTLS_TIMING_C) idle( &server_fd, &timer, ret ); #else idle( &server_fd, ret ); #endif } continue; } if( ret <= 0 ) { switch( ret ) { case MBEDTLS_ERR_SSL_PEER_CLOSE_NOTIFY: mbedtls_printf( " connection was closed gracefully\n" ); ret = 0; goto close_notify; case 0: case MBEDTLS_ERR_NET_CONN_RESET: mbedtls_printf( " connection was reset by peer\n" ); ret = 0; goto reconnect; default: mbedtls_printf( " mbedtls_ssl_read returned -0x%x\n", (unsigned int) -ret ); goto exit; } } len = ret; buf[len] = '\0'; mbedtls_printf( " %d bytes read\n\n%s", len, (char *) buf ); /* End of message should be detected according to the syntax of the * application protocol (eg HTTP), just use a dummy test here. */ if( ret > 0 && buf[len-1] == '\n' ) { ret = 0; break; } } while( 1 ); } else /* Not stream, so datagram */ { len = sizeof( buf ) - 1; memset( buf, 0, sizeof( buf ) ); while( 1 ) { ret = mbedtls_ssl_read( &ssl, buf, len ); #if defined(MBEDTLS_ECP_RESTARTABLE) if( ret == MBEDTLS_ERR_SSL_CRYPTO_IN_PROGRESS ) continue; #endif if( ret != MBEDTLS_ERR_SSL_WANT_READ && ret != MBEDTLS_ERR_SSL_WANT_WRITE ) break; /* For event-driven IO, wait for socket to become available */ if( opt.event == 1 /* level triggered IO */ ) { #if defined(MBEDTLS_TIMING_C) idle( &server_fd, &timer, ret ); #else idle( &server_fd, ret ); #endif } } if( ret <= 0 ) { switch( ret ) { case MBEDTLS_ERR_SSL_TIMEOUT: mbedtls_printf( " timeout\n" ); if( retry_left-- > 0 ) goto send_request; goto exit; case MBEDTLS_ERR_SSL_PEER_CLOSE_NOTIFY: mbedtls_printf( " connection was closed gracefully\n" ); ret = 0; goto close_notify; default: mbedtls_printf( " mbedtls_ssl_read returned -0x%x\n", (unsigned int) -ret ); goto exit; } } len = ret; buf[len] = '\0'; mbedtls_printf( " %d bytes read\n\n%s", len, (char *) buf ); ret = 0; } /* * 7b. Simulate hard reset and reconnect from same port? */ if( opt.reconnect_hard != 0 ) { opt.reconnect_hard = 0; mbedtls_printf( " . Restarting connection from same port..." ); fflush( stdout ); #if defined(MBEDTLS_X509_CRT_PARSE_C) memset( peer_crt_info, 0, sizeof( peer_crt_info ) ); #endif /* MBEDTLS_X509_CRT_PARSE_C */ if( ( ret = mbedtls_ssl_session_reset( &ssl ) ) != 0 ) { mbedtls_printf( " failed\n ! mbedtls_ssl_session_reset returned -0x%x\n\n", (unsigned int) -ret ); goto exit; } while( ( ret = mbedtls_ssl_handshake( &ssl ) ) != 0 ) { if( ret != MBEDTLS_ERR_SSL_WANT_READ && ret != MBEDTLS_ERR_SSL_WANT_WRITE && ret != MBEDTLS_ERR_SSL_CRYPTO_IN_PROGRESS ) { mbedtls_printf( " failed\n ! mbedtls_ssl_handshake returned -0x%x\n\n", (unsigned int) -ret ); goto exit; } /* For event-driven IO, wait for socket to become available */ if( opt.event == 1 /* level triggered IO */ ) { #if defined(MBEDTLS_TIMING_C) idle( &server_fd, &timer, ret ); #else idle( &server_fd, ret ); #endif } } mbedtls_printf( " ok\n" ); goto send_request; } /* * 7c. Simulate serialize/deserialize and go back to data exchange */ #if defined(MBEDTLS_SSL_CONTEXT_SERIALIZATION) if( opt.serialize != 0 ) { size_t buf_len; mbedtls_printf( " . Serializing live connection..." ); ret = mbedtls_ssl_context_save( &ssl, NULL, 0, &buf_len ); if( ret != MBEDTLS_ERR_SSL_BUFFER_TOO_SMALL ) { mbedtls_printf( " failed\n ! mbedtls_ssl_context_save returned " "-0x%x\n\n", (unsigned int) -ret ); goto exit; } if( ( context_buf = mbedtls_calloc( 1, buf_len ) ) == NULL ) { mbedtls_printf( " failed\n ! Couldn't allocate buffer for " "serialized context" ); goto exit; } context_buf_len = buf_len; if( ( ret = mbedtls_ssl_context_save( &ssl, context_buf, buf_len, &buf_len ) ) != 0 ) { mbedtls_printf( " failed\n ! mbedtls_ssl_context_save returned " "-0x%x\n\n", (unsigned int) -ret ); goto exit; } mbedtls_printf( " ok\n" ); /* Save serialized context to the 'opt.context_file' as a base64 code */ if( 0 < strlen( opt.context_file ) ) { FILE *b64_file; uint8_t *b64_buf; size_t b64_len; mbedtls_printf( " . Save serialized context to a file... " ); mbedtls_base64_encode( NULL, 0, &b64_len, context_buf, buf_len ); if( ( b64_buf = mbedtls_calloc( 1, b64_len ) ) == NULL ) { mbedtls_printf( "failed\n ! Couldn't allocate buffer for " "the base64 code\n" ); goto exit; } if( ( ret = mbedtls_base64_encode( b64_buf, b64_len, &b64_len, context_buf, buf_len ) ) != 0 ) { mbedtls_printf( "failed\n ! mbedtls_base64_encode returned " "-0x%x\n", (unsigned int) -ret ); mbedtls_free( b64_buf ); goto exit; } if( ( b64_file = fopen( opt.context_file, "w" ) ) == NULL ) { mbedtls_printf( "failed\n ! Cannot open '%s' for writing.\n", opt.context_file ); mbedtls_free( b64_buf ); goto exit; } if( b64_len != fwrite( b64_buf, 1, b64_len, b64_file ) ) { mbedtls_printf( "failed\n ! fwrite(%ld bytes) failed\n", (long) b64_len ); mbedtls_free( b64_buf ); fclose( b64_file ); goto exit; } mbedtls_free( b64_buf ); fclose( b64_file ); mbedtls_printf( "ok\n" ); } if( opt.serialize == 1 ) { /* nothing to do here, done by context_save() already */ mbedtls_printf( " . Context has been reset... ok\n" ); } if( opt.serialize == 2 ) { mbedtls_printf( " . Freeing and reinitializing context..." ); mbedtls_ssl_free( &ssl ); mbedtls_ssl_init( &ssl ); if( ( ret = mbedtls_ssl_setup( &ssl, &conf ) ) != 0 ) { mbedtls_printf( " failed\n ! mbedtls_ssl_setup returned " "-0x%x\n\n", (unsigned int) -ret ); goto exit; } if( opt.nbio == 2 ) mbedtls_ssl_set_bio( &ssl, &server_fd, delayed_send, delayed_recv, NULL ); else mbedtls_ssl_set_bio( &ssl, &server_fd, mbedtls_net_send, mbedtls_net_recv, opt.nbio == 0 ? mbedtls_net_recv_timeout : NULL ); #if defined(MBEDTLS_TIMING_C) mbedtls_ssl_set_timer_cb( &ssl, &timer, mbedtls_timing_set_delay, mbedtls_timing_get_delay ); #endif /* MBEDTLS_TIMING_C */ mbedtls_printf( " ok\n" ); } mbedtls_printf( " . Deserializing connection..." ); if( ( ret = mbedtls_ssl_context_load( &ssl, context_buf, buf_len ) ) != 0 ) { mbedtls_printf( "failed\n ! mbedtls_ssl_context_load returned " "-0x%x\n\n", (unsigned int) -ret ); goto exit; } mbedtls_free( context_buf ); context_buf = NULL; context_buf_len = 0; mbedtls_printf( " ok\n" ); } #endif /* MBEDTLS_SSL_CONTEXT_SERIALIZATION */ /* * 7d. Continue doing data exchanges? */ if( --opt.exchanges > 0 ) goto send_request; /* * 8. Done, cleanly close the connection */ close_notify: mbedtls_printf( " . Closing the connection..." ); fflush( stdout ); /* * Most of the time sending a close_notify before closing is the right * thing to do. However, when the server already knows how many messages * are expected and closes the connection by itself, this alert becomes * redundant. Sometimes with DTLS this redundancy becomes a problem by * leading to a race condition where the server might close the connection * before seeing the alert, and since UDP is connection-less when the * alert arrives it will be seen as a new connection, which will fail as * the alert is clearly not a valid ClientHello. This may cause spurious * failures in tests that use DTLS and resumption with ssl_server2 in * ssl-opt.sh, avoided by enabling skip_close_notify client-side. */ if( opt.skip_close_notify == 0 ) { /* No error checking, the connection might be closed already */ do ret = mbedtls_ssl_close_notify( &ssl ); while( ret == MBEDTLS_ERR_SSL_WANT_WRITE ); ret = 0; } mbedtls_printf( " done\n" ); /* * 9. Reconnect? */ reconnect: if( opt.reconnect != 0 ) { --opt.reconnect; mbedtls_net_free( &server_fd ); #if defined(MBEDTLS_TIMING_C) if( opt.reco_delay > 0 ) mbedtls_net_usleep( 1000000 * opt.reco_delay ); #endif mbedtls_printf( " . Reconnecting with saved session..." ); #if defined(MBEDTLS_X509_CRT_PARSE_C) memset( peer_crt_info, 0, sizeof( peer_crt_info ) ); #endif /* MBEDTLS_X509_CRT_PARSE_C */ if( ( ret = mbedtls_ssl_session_reset( &ssl ) ) != 0 ) { mbedtls_printf( " failed\n ! mbedtls_ssl_session_reset returned -0x%x\n\n", (unsigned int) -ret ); goto exit; } if( opt.reco_mode == 1 ) { if( ( ret = mbedtls_ssl_session_load( &saved_session, session_data, session_data_len ) ) != 0 ) { mbedtls_printf( " failed\n ! mbedtls_ssl_session_load returned -0x%x\n\n", (unsigned int) -ret ); goto exit; } } if( ( ret = mbedtls_ssl_set_session( &ssl, &saved_session ) ) != 0 ) { mbedtls_printf( " failed\n ! mbedtls_ssl_set_session returned -0x%x\n\n", (unsigned int) -ret ); goto exit; } if( ( ret = mbedtls_net_connect( &server_fd, opt.server_addr, opt.server_port, opt.transport == MBEDTLS_SSL_TRANSPORT_STREAM ? MBEDTLS_NET_PROTO_TCP : MBEDTLS_NET_PROTO_UDP ) ) != 0 ) { mbedtls_printf( " failed\n ! mbedtls_net_connect returned -0x%x\n\n", (unsigned int) -ret ); goto exit; } if( opt.nbio > 0 ) ret = mbedtls_net_set_nonblock( &server_fd ); else ret = mbedtls_net_set_block( &server_fd ); if( ret != 0 ) { mbedtls_printf( " failed\n ! net_set_(non)block() returned -0x%x\n\n", (unsigned int) -ret ); goto exit; } while( ( ret = mbedtls_ssl_handshake( &ssl ) ) != 0 ) { if( ret != MBEDTLS_ERR_SSL_WANT_READ && ret != MBEDTLS_ERR_SSL_WANT_WRITE && ret != MBEDTLS_ERR_SSL_CRYPTO_IN_PROGRESS ) { mbedtls_printf( " failed\n ! mbedtls_ssl_handshake returned -0x%x\n\n", (unsigned int) -ret ); goto exit; } } mbedtls_printf( " ok\n" ); goto send_request; } /* * Cleanup and exit */ exit: #ifdef MBEDTLS_ERROR_C if( ret != 0 ) { char error_buf[100]; mbedtls_strerror( ret, error_buf, 100 ); mbedtls_printf("Last error was: -0x%X - %s\n\n", (unsigned int) -ret, error_buf ); } #endif mbedtls_net_free( &server_fd ); #if defined(MBEDTLS_X509_CRT_PARSE_C) mbedtls_x509_crt_free( &clicert ); mbedtls_x509_crt_free( &cacert ); mbedtls_pk_free( &pkey ); #if defined(MBEDTLS_USE_PSA_CRYPTO) psa_destroy_key( key_slot ); #endif #endif /* MBEDTLS_X509_CRT_PARSE_C */ #if defined(MBEDTLS_KEY_EXCHANGE_SOME_PSK_ENABLED) && \ defined(MBEDTLS_USE_PSA_CRYPTO) if( opt.psk_opaque != 0 ) { /* This is ok even if the slot hasn't been * initialized (we might have jumed here * immediately because of bad cmd line params, * for example). */ status = psa_destroy_key( slot ); if( ( status != PSA_SUCCESS ) && ( opt.query_config_mode == DFL_QUERY_CONFIG_MODE ) ) { mbedtls_printf( "Failed to destroy key slot %u - error was %d", (unsigned) slot, (int) status ); if( ret == 0 ) ret = MBEDTLS_ERR_SSL_HW_ACCEL_FAILED; } } #endif /* MBEDTLS_KEY_EXCHANGE_SOME_PSK_ENABLED && MBEDTLS_USE_PSA_CRYPTO */ mbedtls_ssl_session_free( &saved_session ); mbedtls_ssl_free( &ssl ); mbedtls_ssl_config_free( &conf ); rng_free( &rng ); if( session_data != NULL ) mbedtls_platform_zeroize( session_data, session_data_len ); mbedtls_free( session_data ); #if defined(MBEDTLS_SSL_CONTEXT_SERIALIZATION) if( context_buf != NULL ) mbedtls_platform_zeroize( context_buf, context_buf_len ); mbedtls_free( context_buf ); #endif #if defined(MBEDTLS_USE_PSA_CRYPTO) mbedtls_psa_crypto_free( ); #endif #if defined(MBEDTLS_TEST_HOOKS) if( test_hooks_failure_detected( ) ) { if( ret == 0 ) ret = 1; mbedtls_printf( "Test hooks detected errors.\n" ); } test_hooks_free( ); #endif /* MBEDTLS_TEST_HOOKS */ #if defined(MBEDTLS_MEMORY_BUFFER_ALLOC_C) #if defined(MBEDTLS_MEMORY_DEBUG) mbedtls_memory_buffer_alloc_status(); #endif mbedtls_memory_buffer_alloc_free(); #endif /* MBEDTLS_MEMORY_BUFFER_ALLOC_C */ #if defined(_WIN32) if( opt.query_config_mode == DFL_QUERY_CONFIG_MODE ) { mbedtls_printf( " + Press Enter to exit this program.\n" ); fflush( stdout ); getchar(); } #endif // Shell can not handle large exit numbers -> 1 for errors if( ret < 0 ) ret = 1; if( opt.query_config_mode == DFL_QUERY_CONFIG_MODE ) mbedtls_exit( ret ); else mbedtls_exit( query_config_ret ); } #endif /* !MBEDTLS_SSL_TEST_IMPOSSIBLE && MBEDTLS_SSL_CLI_C */