From 9db10386430479067795bec66bb26343ff176ded Mon Sep 17 00:00:00 2001 From: Adam Harrison Date: Thu, 6 Jul 2023 06:37:41 -0400 Subject: Removed old mbedtls, replacing with submodule. --- lib/mbedtls-2.27.0/library/rsa.c | 2814 -------------------------------------- 1 file changed, 2814 deletions(-) delete mode 100644 lib/mbedtls-2.27.0/library/rsa.c (limited to 'lib/mbedtls-2.27.0/library/rsa.c') diff --git a/lib/mbedtls-2.27.0/library/rsa.c b/lib/mbedtls-2.27.0/library/rsa.c deleted file mode 100644 index 268d025..0000000 --- a/lib/mbedtls-2.27.0/library/rsa.c +++ /dev/null @@ -1,2814 +0,0 @@ -/* - * The RSA public-key cryptosystem - * - * Copyright The Mbed TLS Contributors - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the "License"); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -/* - * The following sources were referenced in the design of this implementation - * of the RSA algorithm: - * - * [1] A method for obtaining digital signatures and public-key cryptosystems - * R Rivest, A Shamir, and L Adleman - * http://people.csail.mit.edu/rivest/pubs.html#RSA78 - * - * [2] Handbook of Applied Cryptography - 1997, Chapter 8 - * Menezes, van Oorschot and Vanstone - * - * [3] Malware Guard Extension: Using SGX to Conceal Cache Attacks - * Michael Schwarz, Samuel Weiser, Daniel Gruss, Clémentine Maurice and - * Stefan Mangard - * https://arxiv.org/abs/1702.08719v2 - * - */ - -#include "common.h" - -#if defined(MBEDTLS_RSA_C) - -#include "mbedtls/rsa.h" -#include "mbedtls/rsa_internal.h" -#include "mbedtls/oid.h" -#include "mbedtls/platform_util.h" -#include "mbedtls/error.h" - -#include - -#if defined(MBEDTLS_PKCS1_V21) -#include "mbedtls/md.h" -#endif - -#if defined(MBEDTLS_PKCS1_V15) && !defined(__OpenBSD__) && !defined(__NetBSD__) -#include -#endif - -#if defined(MBEDTLS_PLATFORM_C) -#include "mbedtls/platform.h" -#else -#include -#define mbedtls_printf printf -#define mbedtls_calloc calloc -#define mbedtls_free free -#endif - -#if !defined(MBEDTLS_RSA_ALT) - -/* Parameter validation macros */ -#define RSA_VALIDATE_RET( cond ) \ - MBEDTLS_INTERNAL_VALIDATE_RET( cond, MBEDTLS_ERR_RSA_BAD_INPUT_DATA ) -#define RSA_VALIDATE( cond ) \ - MBEDTLS_INTERNAL_VALIDATE( cond ) - -#if defined(MBEDTLS_PKCS1_V15) -/* constant-time buffer comparison */ -static inline int mbedtls_safer_memcmp( const void *a, const void *b, size_t n ) -{ - size_t i; - const unsigned char *A = (const unsigned char *) a; - const unsigned char *B = (const unsigned char *) b; - unsigned char diff = 0; - - for( i = 0; i < n; i++ ) - diff |= A[i] ^ B[i]; - - return( diff ); -} -#endif /* MBEDTLS_PKCS1_V15 */ - -int mbedtls_rsa_import( mbedtls_rsa_context *ctx, - const mbedtls_mpi *N, - const mbedtls_mpi *P, const mbedtls_mpi *Q, - const mbedtls_mpi *D, const mbedtls_mpi *E ) -{ - int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED; - RSA_VALIDATE_RET( ctx != NULL ); - - if( ( N != NULL && ( ret = mbedtls_mpi_copy( &ctx->N, N ) ) != 0 ) || - ( P != NULL && ( ret = mbedtls_mpi_copy( &ctx->P, P ) ) != 0 ) || - ( Q != NULL && ( ret = mbedtls_mpi_copy( &ctx->Q, Q ) ) != 0 ) || - ( D != NULL && ( ret = mbedtls_mpi_copy( &ctx->D, D ) ) != 0 ) || - ( E != NULL && ( ret = mbedtls_mpi_copy( &ctx->E, E ) ) != 0 ) ) - { - return( MBEDTLS_ERROR_ADD( MBEDTLS_ERR_RSA_BAD_INPUT_DATA, ret ) ); - } - - if( N != NULL ) - ctx->len = mbedtls_mpi_size( &ctx->N ); - - return( 0 ); -} - -int mbedtls_rsa_import_raw( mbedtls_rsa_context *ctx, - unsigned char const *N, size_t N_len, - unsigned char const *P, size_t P_len, - unsigned char const *Q, size_t Q_len, - unsigned char const *D, size_t D_len, - unsigned char const *E, size_t E_len ) -{ - int ret = 0; - RSA_VALIDATE_RET( ctx != NULL ); - - if( N != NULL ) - { - MBEDTLS_MPI_CHK( mbedtls_mpi_read_binary( &ctx->N, N, N_len ) ); - ctx->len = mbedtls_mpi_size( &ctx->N ); - } - - if( P != NULL ) - MBEDTLS_MPI_CHK( mbedtls_mpi_read_binary( &ctx->P, P, P_len ) ); - - if( Q != NULL ) - MBEDTLS_MPI_CHK( mbedtls_mpi_read_binary( &ctx->Q, Q, Q_len ) ); - - if( D != NULL ) - MBEDTLS_MPI_CHK( mbedtls_mpi_read_binary( &ctx->D, D, D_len ) ); - - if( E != NULL ) - MBEDTLS_MPI_CHK( mbedtls_mpi_read_binary( &ctx->E, E, E_len ) ); - -cleanup: - - if( ret != 0 ) - return( MBEDTLS_ERROR_ADD( MBEDTLS_ERR_RSA_BAD_INPUT_DATA, ret ) ); - - return( 0 ); -} - -/* - * Checks whether the context fields are set in such a way - * that the RSA primitives will be able to execute without error. - * It does *not* make guarantees for consistency of the parameters. - */ -static int rsa_check_context( mbedtls_rsa_context const *ctx, int is_priv, - int blinding_needed ) -{ -#if !defined(MBEDTLS_RSA_NO_CRT) - /* blinding_needed is only used for NO_CRT to decide whether - * P,Q need to be present or not. */ - ((void) blinding_needed); -#endif - - if( ctx->len != mbedtls_mpi_size( &ctx->N ) || - ctx->len > MBEDTLS_MPI_MAX_SIZE ) - { - return( MBEDTLS_ERR_RSA_BAD_INPUT_DATA ); - } - - /* - * 1. Modular exponentiation needs positive, odd moduli. - */ - - /* Modular exponentiation wrt. N is always used for - * RSA public key operations. */ - if( mbedtls_mpi_cmp_int( &ctx->N, 0 ) <= 0 || - mbedtls_mpi_get_bit( &ctx->N, 0 ) == 0 ) - { - return( MBEDTLS_ERR_RSA_BAD_INPUT_DATA ); - } - -#if !defined(MBEDTLS_RSA_NO_CRT) - /* Modular exponentiation for P and Q is only - * used for private key operations and if CRT - * is used. */ - if( is_priv && - ( mbedtls_mpi_cmp_int( &ctx->P, 0 ) <= 0 || - mbedtls_mpi_get_bit( &ctx->P, 0 ) == 0 || - mbedtls_mpi_cmp_int( &ctx->Q, 0 ) <= 0 || - mbedtls_mpi_get_bit( &ctx->Q, 0 ) == 0 ) ) - { - return( MBEDTLS_ERR_RSA_BAD_INPUT_DATA ); - } -#endif /* !MBEDTLS_RSA_NO_CRT */ - - /* - * 2. Exponents must be positive - */ - - /* Always need E for public key operations */ - if( mbedtls_mpi_cmp_int( &ctx->E, 0 ) <= 0 ) - return( MBEDTLS_ERR_RSA_BAD_INPUT_DATA ); - -#if defined(MBEDTLS_RSA_NO_CRT) - /* For private key operations, use D or DP & DQ - * as (unblinded) exponents. */ - if( is_priv && mbedtls_mpi_cmp_int( &ctx->D, 0 ) <= 0 ) - return( MBEDTLS_ERR_RSA_BAD_INPUT_DATA ); -#else - if( is_priv && - ( mbedtls_mpi_cmp_int( &ctx->DP, 0 ) <= 0 || - mbedtls_mpi_cmp_int( &ctx->DQ, 0 ) <= 0 ) ) - { - return( MBEDTLS_ERR_RSA_BAD_INPUT_DATA ); - } -#endif /* MBEDTLS_RSA_NO_CRT */ - - /* Blinding shouldn't make exponents negative either, - * so check that P, Q >= 1 if that hasn't yet been - * done as part of 1. */ -#if defined(MBEDTLS_RSA_NO_CRT) - if( is_priv && blinding_needed && - ( mbedtls_mpi_cmp_int( &ctx->P, 0 ) <= 0 || - mbedtls_mpi_cmp_int( &ctx->Q, 0 ) <= 0 ) ) - { - return( MBEDTLS_ERR_RSA_BAD_INPUT_DATA ); - } -#endif - - /* It wouldn't lead to an error if it wasn't satisfied, - * but check for QP >= 1 nonetheless. */ -#if !defined(MBEDTLS_RSA_NO_CRT) - if( is_priv && - mbedtls_mpi_cmp_int( &ctx->QP, 0 ) <= 0 ) - { - return( MBEDTLS_ERR_RSA_BAD_INPUT_DATA ); - } -#endif - - return( 0 ); -} - -int mbedtls_rsa_complete( mbedtls_rsa_context *ctx ) -{ - int ret = 0; - int have_N, have_P, have_Q, have_D, have_E; -#if !defined(MBEDTLS_RSA_NO_CRT) - int have_DP, have_DQ, have_QP; -#endif - int n_missing, pq_missing, d_missing, is_pub, is_priv; - - RSA_VALIDATE_RET( ctx != NULL ); - - have_N = ( mbedtls_mpi_cmp_int( &ctx->N, 0 ) != 0 ); - have_P = ( mbedtls_mpi_cmp_int( &ctx->P, 0 ) != 0 ); - have_Q = ( mbedtls_mpi_cmp_int( &ctx->Q, 0 ) != 0 ); - have_D = ( mbedtls_mpi_cmp_int( &ctx->D, 0 ) != 0 ); - have_E = ( mbedtls_mpi_cmp_int( &ctx->E, 0 ) != 0 ); - -#if !defined(MBEDTLS_RSA_NO_CRT) - have_DP = ( mbedtls_mpi_cmp_int( &ctx->DP, 0 ) != 0 ); - have_DQ = ( mbedtls_mpi_cmp_int( &ctx->DQ, 0 ) != 0 ); - have_QP = ( mbedtls_mpi_cmp_int( &ctx->QP, 0 ) != 0 ); -#endif - - /* - * Check whether provided parameters are enough - * to deduce all others. The following incomplete - * parameter sets for private keys are supported: - * - * (1) P, Q missing. - * (2) D and potentially N missing. - * - */ - - n_missing = have_P && have_Q && have_D && have_E; - pq_missing = have_N && !have_P && !have_Q && have_D && have_E; - d_missing = have_P && have_Q && !have_D && have_E; - is_pub = have_N && !have_P && !have_Q && !have_D && have_E; - - /* These three alternatives are mutually exclusive */ - is_priv = n_missing || pq_missing || d_missing; - - if( !is_priv && !is_pub ) - return( MBEDTLS_ERR_RSA_BAD_INPUT_DATA ); - - /* - * Step 1: Deduce N if P, Q are provided. - */ - - if( !have_N && have_P && have_Q ) - { - if( ( ret = mbedtls_mpi_mul_mpi( &ctx->N, &ctx->P, - &ctx->Q ) ) != 0 ) - { - return( MBEDTLS_ERROR_ADD( MBEDTLS_ERR_RSA_BAD_INPUT_DATA, ret ) ); - } - - ctx->len = mbedtls_mpi_size( &ctx->N ); - } - - /* - * Step 2: Deduce and verify all remaining core parameters. - */ - - if( pq_missing ) - { - ret = mbedtls_rsa_deduce_primes( &ctx->N, &ctx->E, &ctx->D, - &ctx->P, &ctx->Q ); - if( ret != 0 ) - return( MBEDTLS_ERROR_ADD( MBEDTLS_ERR_RSA_BAD_INPUT_DATA, ret ) ); - - } - else if( d_missing ) - { - if( ( ret = mbedtls_rsa_deduce_private_exponent( &ctx->P, - &ctx->Q, - &ctx->E, - &ctx->D ) ) != 0 ) - { - return( MBEDTLS_ERROR_ADD( MBEDTLS_ERR_RSA_BAD_INPUT_DATA, ret ) ); - } - } - - /* - * Step 3: Deduce all additional parameters specific - * to our current RSA implementation. - */ - -#if !defined(MBEDTLS_RSA_NO_CRT) - if( is_priv && ! ( have_DP && have_DQ && have_QP ) ) - { - ret = mbedtls_rsa_deduce_crt( &ctx->P, &ctx->Q, &ctx->D, - &ctx->DP, &ctx->DQ, &ctx->QP ); - if( ret != 0 ) - return( MBEDTLS_ERROR_ADD( MBEDTLS_ERR_RSA_BAD_INPUT_DATA, ret ) ); - } -#endif /* MBEDTLS_RSA_NO_CRT */ - - /* - * Step 3: Basic sanity checks - */ - - return( rsa_check_context( ctx, is_priv, 1 ) ); -} - -int mbedtls_rsa_export_raw( const mbedtls_rsa_context *ctx, - unsigned char *N, size_t N_len, - unsigned char *P, size_t P_len, - unsigned char *Q, size_t Q_len, - unsigned char *D, size_t D_len, - unsigned char *E, size_t E_len ) -{ - int ret = 0; - int is_priv; - RSA_VALIDATE_RET( ctx != NULL ); - - /* Check if key is private or public */ - is_priv = - mbedtls_mpi_cmp_int( &ctx->N, 0 ) != 0 && - mbedtls_mpi_cmp_int( &ctx->P, 0 ) != 0 && - mbedtls_mpi_cmp_int( &ctx->Q, 0 ) != 0 && - mbedtls_mpi_cmp_int( &ctx->D, 0 ) != 0 && - mbedtls_mpi_cmp_int( &ctx->E, 0 ) != 0; - - if( !is_priv ) - { - /* If we're trying to export private parameters for a public key, - * something must be wrong. */ - if( P != NULL || Q != NULL || D != NULL ) - return( MBEDTLS_ERR_RSA_BAD_INPUT_DATA ); - - } - - if( N != NULL ) - MBEDTLS_MPI_CHK( mbedtls_mpi_write_binary( &ctx->N, N, N_len ) ); - - if( P != NULL ) - MBEDTLS_MPI_CHK( mbedtls_mpi_write_binary( &ctx->P, P, P_len ) ); - - if( Q != NULL ) - MBEDTLS_MPI_CHK( mbedtls_mpi_write_binary( &ctx->Q, Q, Q_len ) ); - - if( D != NULL ) - MBEDTLS_MPI_CHK( mbedtls_mpi_write_binary( &ctx->D, D, D_len ) ); - - if( E != NULL ) - MBEDTLS_MPI_CHK( mbedtls_mpi_write_binary( &ctx->E, E, E_len ) ); - -cleanup: - - return( ret ); -} - -int mbedtls_rsa_export( const mbedtls_rsa_context *ctx, - mbedtls_mpi *N, mbedtls_mpi *P, mbedtls_mpi *Q, - mbedtls_mpi *D, mbedtls_mpi *E ) -{ - int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED; - int is_priv; - RSA_VALIDATE_RET( ctx != NULL ); - - /* Check if key is private or public */ - is_priv = - mbedtls_mpi_cmp_int( &ctx->N, 0 ) != 0 && - mbedtls_mpi_cmp_int( &ctx->P, 0 ) != 0 && - mbedtls_mpi_cmp_int( &ctx->Q, 0 ) != 0 && - mbedtls_mpi_cmp_int( &ctx->D, 0 ) != 0 && - mbedtls_mpi_cmp_int( &ctx->E, 0 ) != 0; - - if( !is_priv ) - { - /* If we're trying to export private parameters for a public key, - * something must be wrong. */ - if( P != NULL || Q != NULL || D != NULL ) - return( MBEDTLS_ERR_RSA_BAD_INPUT_DATA ); - - } - - /* Export all requested core parameters. */ - - if( ( N != NULL && ( ret = mbedtls_mpi_copy( N, &ctx->N ) ) != 0 ) || - ( P != NULL && ( ret = mbedtls_mpi_copy( P, &ctx->P ) ) != 0 ) || - ( Q != NULL && ( ret = mbedtls_mpi_copy( Q, &ctx->Q ) ) != 0 ) || - ( D != NULL && ( ret = mbedtls_mpi_copy( D, &ctx->D ) ) != 0 ) || - ( E != NULL && ( ret = mbedtls_mpi_copy( E, &ctx->E ) ) != 0 ) ) - { - return( ret ); - } - - return( 0 ); -} - -/* - * Export CRT parameters - * This must also be implemented if CRT is not used, for being able to - * write DER encoded RSA keys. The helper function mbedtls_rsa_deduce_crt - * can be used in this case. - */ -int mbedtls_rsa_export_crt( const mbedtls_rsa_context *ctx, - mbedtls_mpi *DP, mbedtls_mpi *DQ, mbedtls_mpi *QP ) -{ - int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED; - int is_priv; - RSA_VALIDATE_RET( ctx != NULL ); - - /* Check if key is private or public */ - is_priv = - mbedtls_mpi_cmp_int( &ctx->N, 0 ) != 0 && - mbedtls_mpi_cmp_int( &ctx->P, 0 ) != 0 && - mbedtls_mpi_cmp_int( &ctx->Q, 0 ) != 0 && - mbedtls_mpi_cmp_int( &ctx->D, 0 ) != 0 && - mbedtls_mpi_cmp_int( &ctx->E, 0 ) != 0; - - if( !is_priv ) - return( MBEDTLS_ERR_RSA_BAD_INPUT_DATA ); - -#if !defined(MBEDTLS_RSA_NO_CRT) - /* Export all requested blinding parameters. */ - if( ( DP != NULL && ( ret = mbedtls_mpi_copy( DP, &ctx->DP ) ) != 0 ) || - ( DQ != NULL && ( ret = mbedtls_mpi_copy( DQ, &ctx->DQ ) ) != 0 ) || - ( QP != NULL && ( ret = mbedtls_mpi_copy( QP, &ctx->QP ) ) != 0 ) ) - { - return( MBEDTLS_ERROR_ADD( MBEDTLS_ERR_RSA_BAD_INPUT_DATA, ret ) ); - } -#else - if( ( ret = mbedtls_rsa_deduce_crt( &ctx->P, &ctx->Q, &ctx->D, - DP, DQ, QP ) ) != 0 ) - { - return( MBEDTLS_ERROR_ADD( MBEDTLS_ERR_RSA_BAD_INPUT_DATA, ret ) ); - } -#endif - - return( 0 ); -} - -/* - * Initialize an RSA context - */ -void mbedtls_rsa_init( mbedtls_rsa_context *ctx, - int padding, - int hash_id ) -{ - RSA_VALIDATE( ctx != NULL ); - RSA_VALIDATE( padding == MBEDTLS_RSA_PKCS_V15 || - padding == MBEDTLS_RSA_PKCS_V21 ); - - memset( ctx, 0, sizeof( mbedtls_rsa_context ) ); - - mbedtls_rsa_set_padding( ctx, padding, hash_id ); - -#if defined(MBEDTLS_THREADING_C) - /* Set ctx->ver to nonzero to indicate that the mutex has been - * initialized and will need to be freed. */ - ctx->ver = 1; - mbedtls_mutex_init( &ctx->mutex ); -#endif -} - -/* - * Set padding for an existing RSA context - */ -void mbedtls_rsa_set_padding( mbedtls_rsa_context *ctx, int padding, - int hash_id ) -{ - RSA_VALIDATE( ctx != NULL ); - RSA_VALIDATE( padding == MBEDTLS_RSA_PKCS_V15 || - padding == MBEDTLS_RSA_PKCS_V21 ); - - ctx->padding = padding; - ctx->hash_id = hash_id; -} - -/* - * Get length in bytes of RSA modulus - */ - -size_t mbedtls_rsa_get_len( const mbedtls_rsa_context *ctx ) -{ - return( ctx->len ); -} - - -#if defined(MBEDTLS_GENPRIME) - -/* - * Generate an RSA keypair - * - * This generation method follows the RSA key pair generation procedure of - * FIPS 186-4 if 2^16 < exponent < 2^256 and nbits = 2048 or nbits = 3072. - */ -int mbedtls_rsa_gen_key( mbedtls_rsa_context *ctx, - int (*f_rng)(void *, unsigned char *, size_t), - void *p_rng, - unsigned int nbits, int exponent ) -{ - int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED; - mbedtls_mpi H, G, L; - int prime_quality = 0; - RSA_VALIDATE_RET( ctx != NULL ); - RSA_VALIDATE_RET( f_rng != NULL ); - - /* - * If the modulus is 1024 bit long or shorter, then the security strength of - * the RSA algorithm is less than or equal to 80 bits and therefore an error - * rate of 2^-80 is sufficient. - */ - if( nbits > 1024 ) - prime_quality = MBEDTLS_MPI_GEN_PRIME_FLAG_LOW_ERR; - - mbedtls_mpi_init( &H ); - mbedtls_mpi_init( &G ); - mbedtls_mpi_init( &L ); - - if( nbits < 128 || exponent < 3 || nbits % 2 != 0 ) - { - ret = MBEDTLS_ERR_RSA_BAD_INPUT_DATA; - goto cleanup; - } - - /* - * find primes P and Q with Q < P so that: - * 1. |P-Q| > 2^( nbits / 2 - 100 ) - * 2. GCD( E, (P-1)*(Q-1) ) == 1 - * 3. E^-1 mod LCM(P-1, Q-1) > 2^( nbits / 2 ) - */ - MBEDTLS_MPI_CHK( mbedtls_mpi_lset( &ctx->E, exponent ) ); - - do - { - MBEDTLS_MPI_CHK( mbedtls_mpi_gen_prime( &ctx->P, nbits >> 1, - prime_quality, f_rng, p_rng ) ); - - MBEDTLS_MPI_CHK( mbedtls_mpi_gen_prime( &ctx->Q, nbits >> 1, - prime_quality, f_rng, p_rng ) ); - - /* make sure the difference between p and q is not too small (FIPS 186-4 §B.3.3 step 5.4) */ - MBEDTLS_MPI_CHK( mbedtls_mpi_sub_mpi( &H, &ctx->P, &ctx->Q ) ); - if( mbedtls_mpi_bitlen( &H ) <= ( ( nbits >= 200 ) ? ( ( nbits >> 1 ) - 99 ) : 0 ) ) - continue; - - /* not required by any standards, but some users rely on the fact that P > Q */ - if( H.s < 0 ) - mbedtls_mpi_swap( &ctx->P, &ctx->Q ); - - /* Temporarily replace P,Q by P-1, Q-1 */ - MBEDTLS_MPI_CHK( mbedtls_mpi_sub_int( &ctx->P, &ctx->P, 1 ) ); - MBEDTLS_MPI_CHK( mbedtls_mpi_sub_int( &ctx->Q, &ctx->Q, 1 ) ); - MBEDTLS_MPI_CHK( mbedtls_mpi_mul_mpi( &H, &ctx->P, &ctx->Q ) ); - - /* check GCD( E, (P-1)*(Q-1) ) == 1 (FIPS 186-4 §B.3.1 criterion 2(a)) */ - MBEDTLS_MPI_CHK( mbedtls_mpi_gcd( &G, &ctx->E, &H ) ); - if( mbedtls_mpi_cmp_int( &G, 1 ) != 0 ) - continue; - - /* compute smallest possible D = E^-1 mod LCM(P-1, Q-1) (FIPS 186-4 §B.3.1 criterion 3(b)) */ - MBEDTLS_MPI_CHK( mbedtls_mpi_gcd( &G, &ctx->P, &ctx->Q ) ); - MBEDTLS_MPI_CHK( mbedtls_mpi_div_mpi( &L, NULL, &H, &G ) ); - MBEDTLS_MPI_CHK( mbedtls_mpi_inv_mod( &ctx->D, &ctx->E, &L ) ); - - if( mbedtls_mpi_bitlen( &ctx->D ) <= ( ( nbits + 1 ) / 2 ) ) // (FIPS 186-4 §B.3.1 criterion 3(a)) - continue; - - break; - } - while( 1 ); - - /* Restore P,Q */ - MBEDTLS_MPI_CHK( mbedtls_mpi_add_int( &ctx->P, &ctx->P, 1 ) ); - MBEDTLS_MPI_CHK( mbedtls_mpi_add_int( &ctx->Q, &ctx->Q, 1 ) ); - - MBEDTLS_MPI_CHK( mbedtls_mpi_mul_mpi( &ctx->N, &ctx->P, &ctx->Q ) ); - - ctx->len = mbedtls_mpi_size( &ctx->N ); - -#if !defined(MBEDTLS_RSA_NO_CRT) - /* - * DP = D mod (P - 1) - * DQ = D mod (Q - 1) - * QP = Q^-1 mod P - */ - MBEDTLS_MPI_CHK( mbedtls_rsa_deduce_crt( &ctx->P, &ctx->Q, &ctx->D, - &ctx->DP, &ctx->DQ, &ctx->QP ) ); -#endif /* MBEDTLS_RSA_NO_CRT */ - - /* Double-check */ - MBEDTLS_MPI_CHK( mbedtls_rsa_check_privkey( ctx ) ); - -cleanup: - - mbedtls_mpi_free( &H ); - mbedtls_mpi_free( &G ); - mbedtls_mpi_free( &L ); - - if( ret != 0 ) - { - mbedtls_rsa_free( ctx ); - - if( ( -ret & ~0x7f ) == 0 ) - ret = MBEDTLS_ERROR_ADD( MBEDTLS_ERR_RSA_KEY_GEN_FAILED, ret ); - return( ret ); - } - - return( 0 ); -} - -#endif /* MBEDTLS_GENPRIME */ - -/* - * Check a public RSA key - */ -int mbedtls_rsa_check_pubkey( const mbedtls_rsa_context *ctx ) -{ - RSA_VALIDATE_RET( ctx != NULL ); - - if( rsa_check_context( ctx, 0 /* public */, 0 /* no blinding */ ) != 0 ) - return( MBEDTLS_ERR_RSA_KEY_CHECK_FAILED ); - - if( mbedtls_mpi_bitlen( &ctx->N ) < 128 ) - { - return( MBEDTLS_ERR_RSA_KEY_CHECK_FAILED ); - } - - if( mbedtls_mpi_get_bit( &ctx->E, 0 ) == 0 || - mbedtls_mpi_bitlen( &ctx->E ) < 2 || - mbedtls_mpi_cmp_mpi( &ctx->E, &ctx->N ) >= 0 ) - { - return( MBEDTLS_ERR_RSA_KEY_CHECK_FAILED ); - } - - return( 0 ); -} - -/* - * Check for the consistency of all fields in an RSA private key context - */ -int mbedtls_rsa_check_privkey( const mbedtls_rsa_context *ctx ) -{ - RSA_VALIDATE_RET( ctx != NULL ); - - if( mbedtls_rsa_check_pubkey( ctx ) != 0 || - rsa_check_context( ctx, 1 /* private */, 1 /* blinding */ ) != 0 ) - { - return( MBEDTLS_ERR_RSA_KEY_CHECK_FAILED ); - } - - if( mbedtls_rsa_validate_params( &ctx->N, &ctx->P, &ctx->Q, - &ctx->D, &ctx->E, NULL, NULL ) != 0 ) - { - return( MBEDTLS_ERR_RSA_KEY_CHECK_FAILED ); - } - -#if !defined(MBEDTLS_RSA_NO_CRT) - else if( mbedtls_rsa_validate_crt( &ctx->P, &ctx->Q, &ctx->D, - &ctx->DP, &ctx->DQ, &ctx->QP ) != 0 ) - { - return( MBEDTLS_ERR_RSA_KEY_CHECK_FAILED ); - } -#endif - - return( 0 ); -} - -/* - * Check if contexts holding a public and private key match - */ -int mbedtls_rsa_check_pub_priv( const mbedtls_rsa_context *pub, - const mbedtls_rsa_context *prv ) -{ - RSA_VALIDATE_RET( pub != NULL ); - RSA_VALIDATE_RET( prv != NULL ); - - if( mbedtls_rsa_check_pubkey( pub ) != 0 || - mbedtls_rsa_check_privkey( prv ) != 0 ) - { - return( MBEDTLS_ERR_RSA_KEY_CHECK_FAILED ); - } - - if( mbedtls_mpi_cmp_mpi( &pub->N, &prv->N ) != 0 || - mbedtls_mpi_cmp_mpi( &pub->E, &prv->E ) != 0 ) - { - return( MBEDTLS_ERR_RSA_KEY_CHECK_FAILED ); - } - - return( 0 ); -} - -/* - * Do an RSA public key operation - */ -int mbedtls_rsa_public( mbedtls_rsa_context *ctx, - const unsigned char *input, - unsigned char *output ) -{ - int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED; - size_t olen; - mbedtls_mpi T; - RSA_VALIDATE_RET( ctx != NULL ); - RSA_VALIDATE_RET( input != NULL ); - RSA_VALIDATE_RET( output != NULL ); - - if( rsa_check_context( ctx, 0 /* public */, 0 /* no blinding */ ) ) - return( MBEDTLS_ERR_RSA_BAD_INPUT_DATA ); - - mbedtls_mpi_init( &T ); - -#if defined(MBEDTLS_THREADING_C) - if( ( ret = mbedtls_mutex_lock( &ctx->mutex ) ) != 0 ) - return( ret ); -#endif - - MBEDTLS_MPI_CHK( mbedtls_mpi_read_binary( &T, input, ctx->len ) ); - - if( mbedtls_mpi_cmp_mpi( &T, &ctx->N ) >= 0 ) - { - ret = MBEDTLS_ERR_MPI_BAD_INPUT_DATA; - goto cleanup; - } - - olen = ctx->len; - MBEDTLS_MPI_CHK( mbedtls_mpi_exp_mod( &T, &T, &ctx->E, &ctx->N, &ctx->RN ) ); - MBEDTLS_MPI_CHK( mbedtls_mpi_write_binary( &T, output, olen ) ); - -cleanup: -#if defined(MBEDTLS_THREADING_C) - if( mbedtls_mutex_unlock( &ctx->mutex ) != 0 ) - return( MBEDTLS_ERR_THREADING_MUTEX_ERROR ); -#endif - - mbedtls_mpi_free( &T ); - - if( ret != 0 ) - return( MBEDTLS_ERROR_ADD( MBEDTLS_ERR_RSA_PUBLIC_FAILED, ret ) ); - - return( 0 ); -} - -/* - * Generate or update blinding values, see section 10 of: - * KOCHER, Paul C. Timing attacks on implementations of Diffie-Hellman, RSA, - * DSS, and other systems. In : Advances in Cryptology-CRYPTO'96. Springer - * Berlin Heidelberg, 1996. p. 104-113. - */ -static int rsa_prepare_blinding( mbedtls_rsa_context *ctx, - int (*f_rng)(void *, unsigned char *, size_t), void *p_rng ) -{ - int ret, count = 0; - mbedtls_mpi R; - - mbedtls_mpi_init( &R ); - - if( ctx->Vf.p != NULL ) - { - /* We already have blinding values, just update them by squaring */ - MBEDTLS_MPI_CHK( mbedtls_mpi_mul_mpi( &ctx->Vi, &ctx->Vi, &ctx->Vi ) ); - MBEDTLS_MPI_CHK( mbedtls_mpi_mod_mpi( &ctx->Vi, &ctx->Vi, &ctx->N ) ); - MBEDTLS_MPI_CHK( mbedtls_mpi_mul_mpi( &ctx->Vf, &ctx->Vf, &ctx->Vf ) ); - MBEDTLS_MPI_CHK( mbedtls_mpi_mod_mpi( &ctx->Vf, &ctx->Vf, &ctx->N ) ); - - goto cleanup; - } - - /* Unblinding value: Vf = random number, invertible mod N */ - do { - if( count++ > 10 ) - { - ret = MBEDTLS_ERR_RSA_RNG_FAILED; - goto cleanup; - } - - MBEDTLS_MPI_CHK( mbedtls_mpi_fill_random( &ctx->Vf, ctx->len - 1, f_rng, p_rng ) ); - - /* Compute Vf^-1 as R * (R Vf)^-1 to avoid leaks from inv_mod. */ - MBEDTLS_MPI_CHK( mbedtls_mpi_fill_random( &R, ctx->len - 1, f_rng, p_rng ) ); - MBEDTLS_MPI_CHK( mbedtls_mpi_mul_mpi( &ctx->Vi, &ctx->Vf, &R ) ); - MBEDTLS_MPI_CHK( mbedtls_mpi_mod_mpi( &ctx->Vi, &ctx->Vi, &ctx->N ) ); - - /* At this point, Vi is invertible mod N if and only if both Vf and R - * are invertible mod N. If one of them isn't, we don't need to know - * which one, we just loop and choose new values for both of them. - * (Each iteration succeeds with overwhelming probability.) */ - ret = mbedtls_mpi_inv_mod( &ctx->Vi, &ctx->Vi, &ctx->N ); - if( ret != 0 && ret != MBEDTLS_ERR_MPI_NOT_ACCEPTABLE ) - goto cleanup; - - } while( ret == MBEDTLS_ERR_MPI_NOT_ACCEPTABLE ); - - /* Finish the computation of Vf^-1 = R * (R Vf)^-1 */ - MBEDTLS_MPI_CHK( mbedtls_mpi_mul_mpi( &ctx->Vi, &ctx->Vi, &R ) ); - MBEDTLS_MPI_CHK( mbedtls_mpi_mod_mpi( &ctx->Vi, &ctx->Vi, &ctx->N ) ); - - /* Blinding value: Vi = Vf^(-e) mod N - * (Vi already contains Vf^-1 at this point) */ - MBEDTLS_MPI_CHK( mbedtls_mpi_exp_mod( &ctx->Vi, &ctx->Vi, &ctx->E, &ctx->N, &ctx->RN ) ); - - -cleanup: - mbedtls_mpi_free( &R ); - - return( ret ); -} - -/* - * Exponent blinding supposed to prevent side-channel attacks using multiple - * traces of measurements to recover the RSA key. The more collisions are there, - * the more bits of the key can be recovered. See [3]. - * - * Collecting n collisions with m bit long blinding value requires 2^(m-m/n) - * observations on avarage. - * - * For example with 28 byte blinding to achieve 2 collisions the adversary has - * to make 2^112 observations on avarage. - * - * (With the currently (as of 2017 April) known best algorithms breaking 2048 - * bit RSA requires approximately as much time as trying out 2^112 random keys. - * Thus in this sense with 28 byte blinding the security is not reduced by - * side-channel attacks like the one in [3]) - * - * This countermeasure does not help if the key recovery is possible with a - * single trace. - */ -#define RSA_EXPONENT_BLINDING 28 - -/* - * Do an RSA private key operation - */ -int mbedtls_rsa_private( mbedtls_rsa_context *ctx, - int (*f_rng)(void *, unsigned char *, size_t), - void *p_rng, - const unsigned char *input, - unsigned char *output ) -{ - int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED; - size_t olen; - - /* Temporary holding the result */ - mbedtls_mpi T; - - /* Temporaries holding P-1, Q-1 and the - * exponent blinding factor, respectively. */ - mbedtls_mpi P1, Q1, R; - -#if !defined(MBEDTLS_RSA_NO_CRT) - /* Temporaries holding the results mod p resp. mod q. */ - mbedtls_mpi TP, TQ; - - /* Temporaries holding the blinded exponents for - * the mod p resp. mod q computation (if used). */ - mbedtls_mpi DP_blind, DQ_blind; - - /* Pointers to actual exponents to be used - either the unblinded - * or the blinded ones, depending on the presence of a PRNG. */ - mbedtls_mpi *DP = &ctx->DP; - mbedtls_mpi *DQ = &ctx->DQ; -#else - /* Temporary holding the blinded exponent (if used). */ - mbedtls_mpi D_blind; - - /* Pointer to actual exponent to be used - either the unblinded - * or the blinded one, depending on the presence of a PRNG. */ - mbedtls_mpi *D = &ctx->D; -#endif /* MBEDTLS_RSA_NO_CRT */ - - /* Temporaries holding the initial input and the double - * checked result; should be the same in the end. */ - mbedtls_mpi I, C; - - RSA_VALIDATE_RET( ctx != NULL ); - RSA_VALIDATE_RET( input != NULL ); - RSA_VALIDATE_RET( output != NULL ); - - if( rsa_check_context( ctx, 1 /* private key checks */, - f_rng != NULL /* blinding y/n */ ) != 0 ) - { - return( MBEDTLS_ERR_RSA_BAD_INPUT_DATA ); - } - -#if defined(MBEDTLS_THREADING_C) - if( ( ret = mbedtls_mutex_lock( &ctx->mutex ) ) != 0 ) - return( ret ); -#endif - - /* MPI Initialization */ - mbedtls_mpi_init( &T ); - - mbedtls_mpi_init( &P1 ); - mbedtls_mpi_init( &Q1 ); - mbedtls_mpi_init( &R ); - - if( f_rng != NULL ) - { -#if defined(MBEDTLS_RSA_NO_CRT) - mbedtls_mpi_init( &D_blind ); -#else - mbedtls_mpi_init( &DP_blind ); - mbedtls_mpi_init( &DQ_blind ); -#endif - } - -#if !defined(MBEDTLS_RSA_NO_CRT) - mbedtls_mpi_init( &TP ); mbedtls_mpi_init( &TQ ); -#endif - - mbedtls_mpi_init( &I ); - mbedtls_mpi_init( &C ); - - /* End of MPI initialization */ - - MBEDTLS_MPI_CHK( mbedtls_mpi_read_binary( &T, input, ctx->len ) ); - if( mbedtls_mpi_cmp_mpi( &T, &ctx->N ) >= 0 ) - { - ret = MBEDTLS_ERR_MPI_BAD_INPUT_DATA; - goto cleanup; - } - - MBEDTLS_MPI_CHK( mbedtls_mpi_copy( &I, &T ) ); - - if( f_rng != NULL ) - { - /* - * Blinding - * T = T * Vi mod N - */ - MBEDTLS_MPI_CHK( rsa_prepare_blinding( ctx, f_rng, p_rng ) ); - MBEDTLS_MPI_CHK( mbedtls_mpi_mul_mpi( &T, &T, &ctx->Vi ) ); - MBEDTLS_MPI_CHK( mbedtls_mpi_mod_mpi( &T, &T, &ctx->N ) ); - - /* - * Exponent blinding - */ - MBEDTLS_MPI_CHK( mbedtls_mpi_sub_int( &P1, &ctx->P, 1 ) ); - MBEDTLS_MPI_CHK( mbedtls_mpi_sub_int( &Q1, &ctx->Q, 1 ) ); - -#if defined(MBEDTLS_RSA_NO_CRT) - /* - * D_blind = ( P - 1 ) * ( Q - 1 ) * R + D - */ - MBEDTLS_MPI_CHK( mbedtls_mpi_fill_random( &R, RSA_EXPONENT_BLINDING, - f_rng, p_rng ) ); - MBEDTLS_MPI_CHK( mbedtls_mpi_mul_mpi( &D_blind, &P1, &Q1 ) ); - MBEDTLS_MPI_CHK( mbedtls_mpi_mul_mpi( &D_blind, &D_blind, &R ) ); - MBEDTLS_MPI_CHK( mbedtls_mpi_add_mpi( &D_blind, &D_blind, &ctx->D ) ); - - D = &D_blind; -#else - /* - * DP_blind = ( P - 1 ) * R + DP - */ - MBEDTLS_MPI_CHK( mbedtls_mpi_fill_random( &R, RSA_EXPONENT_BLINDING, - f_rng, p_rng ) ); - MBEDTLS_MPI_CHK( mbedtls_mpi_mul_mpi( &DP_blind, &P1, &R ) ); - MBEDTLS_MPI_CHK( mbedtls_mpi_add_mpi( &DP_blind, &DP_blind, - &ctx->DP ) ); - - DP = &DP_blind; - - /* - * DQ_blind = ( Q - 1 ) * R + DQ - */ - MBEDTLS_MPI_CHK( mbedtls_mpi_fill_random( &R, RSA_EXPONENT_BLINDING, - f_rng, p_rng ) ); - MBEDTLS_MPI_CHK( mbedtls_mpi_mul_mpi( &DQ_blind, &Q1, &R ) ); - MBEDTLS_MPI_CHK( mbedtls_mpi_add_mpi( &DQ_blind, &DQ_blind, - &ctx->DQ ) ); - - DQ = &DQ_blind; -#endif /* MBEDTLS_RSA_NO_CRT */ - } - -#if defined(MBEDTLS_RSA_NO_CRT) - MBEDTLS_MPI_CHK( mbedtls_mpi_exp_mod( &T, &T, D, &ctx->N, &ctx->RN ) ); -#else - /* - * Faster decryption using the CRT - * - * TP = input ^ dP mod P - * TQ = input ^ dQ mod Q - */ - - MBEDTLS_MPI_CHK( mbedtls_mpi_exp_mod( &TP, &T, DP, &ctx->P, &ctx->RP ) ); - MBEDTLS_MPI_CHK( mbedtls_mpi_exp_mod( &TQ, &T, DQ, &ctx->Q, &ctx->RQ ) ); - - /* - * T = (TP - TQ) * (Q^-1 mod P) mod P - */ - MBEDTLS_MPI_CHK( mbedtls_mpi_sub_mpi( &T, &TP, &TQ ) ); - MBEDTLS_MPI_CHK( mbedtls_mpi_mul_mpi( &TP, &T, &ctx->QP ) ); - MBEDTLS_MPI_CHK( mbedtls_mpi_mod_mpi( &T, &TP, &ctx->P ) ); - - /* - * T = TQ + T * Q - */ - MBEDTLS_MPI_CHK( mbedtls_mpi_mul_mpi( &TP, &T, &ctx->Q ) ); - MBEDTLS_MPI_CHK( mbedtls_mpi_add_mpi( &T, &TQ, &TP ) ); -#endif /* MBEDTLS_RSA_NO_CRT */ - - if( f_rng != NULL ) - { - /* - * Unblind - * T = T * Vf mod N - */ - MBEDTLS_MPI_CHK( mbedtls_mpi_mul_mpi( &T, &T, &ctx->Vf ) ); - MBEDTLS_MPI_CHK( mbedtls_mpi_mod_mpi( &T, &T, &ctx->N ) ); - } - - /* Verify the result to prevent glitching attacks. */ - MBEDTLS_MPI_CHK( mbedtls_mpi_exp_mod( &C, &T, &ctx->E, - &ctx->N, &ctx->RN ) ); - if( mbedtls_mpi_cmp_mpi( &C, &I ) != 0 ) - { - ret = MBEDTLS_ERR_RSA_VERIFY_FAILED; - goto cleanup; - } - - olen = ctx->len; - MBEDTLS_MPI_CHK( mbedtls_mpi_write_binary( &T, output, olen ) ); - -cleanup: -#if defined(MBEDTLS_THREADING_C) - if( mbedtls_mutex_unlock( &ctx->mutex ) != 0 ) - return( MBEDTLS_ERR_THREADING_MUTEX_ERROR ); -#endif - - mbedtls_mpi_free( &P1 ); - mbedtls_mpi_free( &Q1 ); - mbedtls_mpi_free( &R ); - - if( f_rng != NULL ) - { -#if defined(MBEDTLS_RSA_NO_CRT) - mbedtls_mpi_free( &D_blind ); -#else - mbedtls_mpi_free( &DP_blind ); - mbedtls_mpi_free( &DQ_blind ); -#endif - } - - mbedtls_mpi_free( &T ); - -#if !defined(MBEDTLS_RSA_NO_CRT) - mbedtls_mpi_free( &TP ); mbedtls_mpi_free( &TQ ); -#endif - - mbedtls_mpi_free( &C ); - mbedtls_mpi_free( &I ); - - if( ret != 0 && ret >= -0x007f ) - return( MBEDTLS_ERROR_ADD( MBEDTLS_ERR_RSA_PRIVATE_FAILED, ret ) ); - - return( ret ); -} - -#if defined(MBEDTLS_PKCS1_V21) -/** - * Generate and apply the MGF1 operation (from PKCS#1 v2.1) to a buffer. - * - * \param dst buffer to mask - * \param dlen length of destination buffer - * \param src source of the mask generation - * \param slen length of the source buffer - * \param md_ctx message digest context to use - */ -static int mgf_mask( unsigned char *dst, size_t dlen, unsigned char *src, - size_t slen, mbedtls_md_context_t *md_ctx ) -{ - unsigned char mask[MBEDTLS_MD_MAX_SIZE]; - unsigned char counter[4]; - unsigned char *p; - unsigned int hlen; - size_t i, use_len; - int ret = 0; - - memset( mask, 0, MBEDTLS_MD_MAX_SIZE ); - memset( counter, 0, 4 ); - - hlen = mbedtls_md_get_size( md_ctx->md_info ); - - /* Generate and apply dbMask */ - p = dst; - - while( dlen > 0 ) - { - use_len = hlen; - if( dlen < hlen ) - use_len = dlen; - - if( ( ret = mbedtls_md_starts( md_ctx ) ) != 0 ) - goto exit; - if( ( ret = mbedtls_md_update( md_ctx, src, slen ) ) != 0 ) - goto exit; - if( ( ret = mbedtls_md_update( md_ctx, counter, 4 ) ) != 0 ) - goto exit; - if( ( ret = mbedtls_md_finish( md_ctx, mask ) ) != 0 ) - goto exit; - - for( i = 0; i < use_len; ++i ) - *p++ ^= mask[i]; - - counter[3]++; - - dlen -= use_len; - } - -exit: - mbedtls_platform_zeroize( mask, sizeof( mask ) ); - - return( ret ); -} -#endif /* MBEDTLS_PKCS1_V21 */ - -#if defined(MBEDTLS_PKCS1_V21) -/* - * Implementation of the PKCS#1 v2.1 RSAES-OAEP-ENCRYPT function - */ -int mbedtls_rsa_rsaes_oaep_encrypt( mbedtls_rsa_context *ctx, - int (*f_rng)(void *, unsigned char *, size_t), - void *p_rng, - int mode, - const unsigned char *label, size_t label_len, - size_t ilen, - const unsigned char *input, - unsigned char *output ) -{ - size_t olen; - int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED; - unsigned char *p = output; - unsigned int hlen; - const mbedtls_md_info_t *md_info; - mbedtls_md_context_t md_ctx; - - RSA_VALIDATE_RET( ctx != NULL ); - RSA_VALIDATE_RET( mode == MBEDTLS_RSA_PRIVATE || - mode == MBEDTLS_RSA_PUBLIC ); - RSA_VALIDATE_RET( output != NULL ); - RSA_VALIDATE_RET( ilen == 0 || input != NULL ); - RSA_VALIDATE_RET( label_len == 0 || label != NULL ); - - if( mode == MBEDTLS_RSA_PRIVATE && ctx->padding != MBEDTLS_RSA_PKCS_V21 ) - return( MBEDTLS_ERR_RSA_BAD_INPUT_DATA ); - - if( f_rng == NULL ) - return( MBEDTLS_ERR_RSA_BAD_INPUT_DATA ); - - md_info = mbedtls_md_info_from_type( (mbedtls_md_type_t) ctx->hash_id ); - if( md_info == NULL ) - return( MBEDTLS_ERR_RSA_BAD_INPUT_DATA ); - - olen = ctx->len; - hlen = mbedtls_md_get_size( md_info ); - - /* first comparison checks for overflow */ - if( ilen + 2 * hlen + 2 < ilen || olen < ilen + 2 * hlen + 2 ) - return( MBEDTLS_ERR_RSA_BAD_INPUT_DATA ); - - memset( output, 0, olen ); - - *p++ = 0; - - /* Generate a random octet string seed */ - if( ( ret = f_rng( p_rng, p, hlen ) ) != 0 ) - return( MBEDTLS_ERROR_ADD( MBEDTLS_ERR_RSA_RNG_FAILED, ret ) ); - - p += hlen; - - /* Construct DB */ - if( ( ret = mbedtls_md( md_info, label, label_len, p ) ) != 0 ) - return( ret ); - p += hlen; - p += olen - 2 * hlen - 2 - ilen; - *p++ = 1; - if( ilen != 0 ) - memcpy( p, input, ilen ); - - mbedtls_md_init( &md_ctx ); - if( ( ret = mbedtls_md_setup( &md_ctx, md_info, 0 ) ) != 0 ) - goto exit; - - /* maskedDB: Apply dbMask to DB */ - if( ( ret = mgf_mask( output + hlen + 1, olen - hlen - 1, output + 1, hlen, - &md_ctx ) ) != 0 ) - goto exit; - - /* maskedSeed: Apply seedMask to seed */ - if( ( ret = mgf_mask( output + 1, hlen, output + hlen + 1, olen - hlen - 1, - &md_ctx ) ) != 0 ) - goto exit; - -exit: - mbedtls_md_free( &md_ctx ); - - if( ret != 0 ) - return( ret ); - - return( ( mode == MBEDTLS_RSA_PUBLIC ) - ? mbedtls_rsa_public( ctx, output, output ) - : mbedtls_rsa_private( ctx, f_rng, p_rng, output, output ) ); -} -#endif /* MBEDTLS_PKCS1_V21 */ - -#if defined(MBEDTLS_PKCS1_V15) -/* - * Implementation of the PKCS#1 v2.1 RSAES-PKCS1-V1_5-ENCRYPT function - */ -int mbedtls_rsa_rsaes_pkcs1_v15_encrypt( mbedtls_rsa_context *ctx, - int (*f_rng)(void *, unsigned char *, size_t), - void *p_rng, - int mode, size_t ilen, - const unsigned char *input, - unsigned char *output ) -{ - size_t nb_pad, olen; - int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED; - unsigned char *p = output; - - RSA_VALIDATE_RET( ctx != NULL ); - RSA_VALIDATE_RET( mode == MBEDTLS_RSA_PRIVATE || - mode == MBEDTLS_RSA_PUBLIC ); - RSA_VALIDATE_RET( output != NULL ); - RSA_VALIDATE_RET( ilen == 0 || input != NULL ); - - if( mode == MBEDTLS_RSA_PRIVATE && ctx->padding != MBEDTLS_RSA_PKCS_V15 ) - return( MBEDTLS_ERR_RSA_BAD_INPUT_DATA ); - - olen = ctx->len; - - /* first comparison checks for overflow */ - if( ilen + 11 < ilen || olen < ilen + 11 ) - return( MBEDTLS_ERR_RSA_BAD_INPUT_DATA ); - - nb_pad = olen - 3 - ilen; - - *p++ = 0; - if( mode == MBEDTLS_RSA_PUBLIC ) - { - if( f_rng == NULL ) - return( MBEDTLS_ERR_RSA_BAD_INPUT_DATA ); - - *p++ = MBEDTLS_RSA_CRYPT; - - while( nb_pad-- > 0 ) - { - int rng_dl = 100; - - do { - ret = f_rng( p_rng, p, 1 ); - } while( *p == 0 && --rng_dl && ret == 0 ); - - /* Check if RNG failed to generate data */ - if( rng_dl == 0 || ret != 0 ) - return( MBEDTLS_ERROR_ADD( MBEDTLS_ERR_RSA_RNG_FAILED, ret ) ); - - p++; - } - } - else - { - *p++ = MBEDTLS_RSA_SIGN; - - while( nb_pad-- > 0 ) - *p++ = 0xFF; - } - - *p++ = 0; - if( ilen != 0 ) - memcpy( p, input, ilen ); - - return( ( mode == MBEDTLS_RSA_PUBLIC ) - ? mbedtls_rsa_public( ctx, output, output ) - : mbedtls_rsa_private( ctx, f_rng, p_rng, output, output ) ); -} -#endif /* MBEDTLS_PKCS1_V15 */ - -/* - * Add the message padding, then do an RSA operation - */ -int mbedtls_rsa_pkcs1_encrypt( mbedtls_rsa_context *ctx, - int (*f_rng)(void *, unsigned char *, size_t), - void *p_rng, - int mode, size_t ilen, - const unsigned char *input, - unsigned char *output ) -{ - RSA_VALIDATE_RET( ctx != NULL ); - RSA_VALIDATE_RET( mode == MBEDTLS_RSA_PRIVATE || - mode == MBEDTLS_RSA_PUBLIC ); - RSA_VALIDATE_RET( output != NULL ); - RSA_VALIDATE_RET( ilen == 0 || input != NULL ); - - switch( ctx->padding ) - { -#if defined(MBEDTLS_PKCS1_V15) - case MBEDTLS_RSA_PKCS_V15: - return mbedtls_rsa_rsaes_pkcs1_v15_encrypt( ctx, f_rng, p_rng, mode, ilen, - input, output ); -#endif - -#if defined(MBEDTLS_PKCS1_V21) - case MBEDTLS_RSA_PKCS_V21: - return mbedtls_rsa_rsaes_oaep_encrypt( ctx, f_rng, p_rng, mode, NULL, 0, - ilen, input, output ); -#endif - - default: - return( MBEDTLS_ERR_RSA_INVALID_PADDING ); - } -} - -#if defined(MBEDTLS_PKCS1_V21) -/* - * Implementation of the PKCS#1 v2.1 RSAES-OAEP-DECRYPT function - */ -int mbedtls_rsa_rsaes_oaep_decrypt( mbedtls_rsa_context *ctx, - int (*f_rng)(void *, unsigned char *, size_t), - void *p_rng, - int mode, - const unsigned char *label, size_t label_len, - size_t *olen, - const unsigned char *input, - unsigned char *output, - size_t output_max_len ) -{ - int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED; - size_t ilen, i, pad_len; - unsigned char *p, bad, pad_done; - unsigned char buf[MBEDTLS_MPI_MAX_SIZE]; - unsigned char lhash[MBEDTLS_MD_MAX_SIZE]; - unsigned int hlen; - const mbedtls_md_info_t *md_info; - mbedtls_md_context_t md_ctx; - - RSA_VALIDATE_RET( ctx != NULL ); - RSA_VALIDATE_RET( mode == MBEDTLS_RSA_PRIVATE || - mode == MBEDTLS_RSA_PUBLIC ); - RSA_VALIDATE_RET( output_max_len == 0 || output != NULL ); - RSA_VALIDATE_RET( label_len == 0 || label != NULL ); - RSA_VALIDATE_RET( input != NULL ); - RSA_VALIDATE_RET( olen != NULL ); - - /* - * Parameters sanity checks - */ - if( mode == MBEDTLS_RSA_PRIVATE && ctx->padding != MBEDTLS_RSA_PKCS_V21 ) - return( MBEDTLS_ERR_RSA_BAD_INPUT_DATA ); - - ilen = ctx->len; - - if( ilen < 16 || ilen > sizeof( buf ) ) - return( MBEDTLS_ERR_RSA_BAD_INPUT_DATA ); - - md_info = mbedtls_md_info_from_type( (mbedtls_md_type_t) ctx->hash_id ); - if( md_info == NULL ) - return( MBEDTLS_ERR_RSA_BAD_INPUT_DATA ); - - hlen = mbedtls_md_get_size( md_info ); - - // checking for integer underflow - if( 2 * hlen + 2 > ilen ) - return( MBEDTLS_ERR_RSA_BAD_INPUT_DATA ); - - /* - * RSA operation - */ - ret = ( mode == MBEDTLS_RSA_PUBLIC ) - ? mbedtls_rsa_public( ctx, input, buf ) - : mbedtls_rsa_private( ctx, f_rng, p_rng, input, buf ); - - if( ret != 0 ) - goto cleanup; - - /* - * Unmask data and generate lHash - */ - mbedtls_md_init( &md_ctx ); - if( ( ret = mbedtls_md_setup( &md_ctx, md_info, 0 ) ) != 0 ) - { - mbedtls_md_free( &md_ctx ); - goto cleanup; - } - - /* seed: Apply seedMask to maskedSeed */ - if( ( ret = mgf_mask( buf + 1, hlen, buf + hlen + 1, ilen - hlen - 1, - &md_ctx ) ) != 0 || - /* DB: Apply dbMask to maskedDB */ - ( ret = mgf_mask( buf + hlen + 1, ilen - hlen - 1, buf + 1, hlen, - &md_ctx ) ) != 0 ) - { - mbedtls_md_free( &md_ctx ); - goto cleanup; - } - - mbedtls_md_free( &md_ctx ); - - /* Generate lHash */ - if( ( ret = mbedtls_md( md_info, label, label_len, lhash ) ) != 0 ) - goto cleanup; - - /* - * Check contents, in "constant-time" - */ - p = buf; - bad = 0; - - bad |= *p++; /* First byte must be 0 */ - - p += hlen; /* Skip seed */ - - /* Check lHash */ - for( i = 0; i < hlen; i++ ) - bad |= lhash[i] ^ *p++; - - /* Get zero-padding len, but always read till end of buffer - * (minus one, for the 01 byte) */ - pad_len = 0; - pad_done = 0; - for( i = 0; i < ilen - 2 * hlen - 2; i++ ) - { - pad_done |= p[i]; - pad_len += ((pad_done | (unsigned char)-pad_done) >> 7) ^ 1; - } - - p += pad_len; - bad |= *p++ ^ 0x01; - - /* - * The only information "leaked" is whether the padding was correct or not - * (eg, no data is copied if it was not correct). This meets the - * recommendations in PKCS#1 v2.2: an opponent cannot distinguish between - * the different error conditions. - */ - if( bad != 0 ) - { - ret = MBEDTLS_ERR_RSA_INVALID_PADDING; - goto cleanup; - } - - if( ilen - ( p - buf ) > output_max_len ) - { - ret = MBEDTLS_ERR_RSA_OUTPUT_TOO_LARGE; - goto cleanup; - } - - *olen = ilen - (p - buf); - if( *olen != 0 ) - memcpy( output, p, *olen ); - ret = 0; - -cleanup: - mbedtls_platform_zeroize( buf, sizeof( buf ) ); - mbedtls_platform_zeroize( lhash, sizeof( lhash ) ); - - return( ret ); -} -#endif /* MBEDTLS_PKCS1_V21 */ - -#if defined(MBEDTLS_PKCS1_V15) -/** Turn zero-or-nonzero into zero-or-all-bits-one, without branches. - * - * \param value The value to analyze. - * \return Zero if \p value is zero, otherwise all-bits-one. - */ -static unsigned all_or_nothing_int( unsigned value ) -{ - /* MSVC has a warning about unary minus on unsigned, but this is - * well-defined and precisely what we want to do here */ -#if defined(_MSC_VER) -#pragma warning( push ) -#pragma warning( disable : 4146 ) -#endif - return( - ( ( value | - value ) >> ( sizeof( value ) * 8 - 1 ) ) ); -#if defined(_MSC_VER) -#pragma warning( pop ) -#endif -} - -/** Check whether a size is out of bounds, without branches. - * - * This is equivalent to `size > max`, but is likely to be compiled to - * to code using bitwise operation rather than a branch. - * - * \param size Size to check. - * \param max Maximum desired value for \p size. - * \return \c 0 if `size <= max`. - * \return \c 1 if `size > max`. - */ -static unsigned size_greater_than( size_t size, size_t max ) -{ - /* Return the sign bit (1 for negative) of (max - size). */ - return( ( max - size ) >> ( sizeof( size_t ) * 8 - 1 ) ); -} - -/** Choose between two integer values, without branches. - * - * This is equivalent to `cond ? if1 : if0`, but is likely to be compiled - * to code using bitwise operation rather than a branch. - * - * \param cond Condition to test. - * \param if1 Value to use if \p cond is nonzero. - * \param if0 Value to use if \p cond is zero. - * \return \c if1 if \p cond is nonzero, otherwise \c if0. - */ -static unsigned if_int( unsigned cond, unsigned if1, unsigned if0 ) -{ - unsigned mask = all_or_nothing_int( cond ); - return( ( mask & if1 ) | (~mask & if0 ) ); -} - -/** Shift some data towards the left inside a buffer without leaking - * the length of the data through side channels. - * - * `mem_move_to_left(start, total, offset)` is functionally equivalent to - * ``` - * memmove(start, start + offset, total - offset); - * memset(start + offset, 0, total - offset); - * ``` - * but it strives to use a memory access pattern (and thus total timing) - * that does not depend on \p offset. This timing independence comes at - * the expense of performance. - * - * \param start Pointer to the start of the buffer. - * \param total Total size of the buffer. - * \param offset Offset from which to copy \p total - \p offset bytes. - */ -static void mem_move_to_left( void *start, - size_t total, - size_t offset ) -{ - volatile unsigned char *buf = start; - size_t i, n; - if( total == 0 ) - return; - for( i = 0; i < total; i++ ) - { - unsigned no_op = size_greater_than( total - offset, i ); - /* The first `total - offset` passes are a no-op. The last - * `offset` passes shift the data one byte to the left and - * zero out the last byte. */ - for( n = 0; n < total - 1; n++ ) - { - unsigned char current = buf[n]; - unsigned char next = buf[n+1]; - buf[n] = if_int( no_op, current, next ); - } - buf[total-1] = if_int( no_op, buf[total-1], 0 ); - } -} - -/* - * Implementation of the PKCS#1 v2.1 RSAES-PKCS1-V1_5-DECRYPT function - */ -int mbedtls_rsa_rsaes_pkcs1_v15_decrypt( mbedtls_rsa_context *ctx, - int (*f_rng)(void *, unsigned char *, size_t), - void *p_rng, - int mode, size_t *olen, - const unsigned char *input, - unsigned char *output, - size_t output_max_len ) -{ - int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED; - size_t ilen, i, plaintext_max_size; - unsigned char buf[MBEDTLS_MPI_MAX_SIZE]; - /* The following variables take sensitive values: their value must - * not leak into the observable behavior of the function other than - * the designated outputs (output, olen, return value). Otherwise - * this would open the execution of the function to - * side-channel-based variants of the Bleichenbacher padding oracle - * attack. Potential side channels include overall timing, memory - * access patterns (especially visible to an adversary who has access - * to a shared memory cache), and branches (especially visible to - * an adversary who has access to a shared code cache or to a shared - * branch predictor). */ - size_t pad_count = 0; - unsigned bad = 0; - unsigned char pad_done = 0; - size_t plaintext_size = 0; - unsigned output_too_large; - - RSA_VALIDATE_RET( ctx != NULL ); - RSA_VALIDATE_RET( mode == MBEDTLS_RSA_PRIVATE || - mode == MBEDTLS_RSA_PUBLIC ); - RSA_VALIDATE_RET( output_max_len == 0 || output != NULL ); - RSA_VALIDATE_RET( input != NULL ); - RSA_VALIDATE_RET( olen != NULL ); - - ilen = ctx->len; - plaintext_max_size = ( output_max_len > ilen - 11 ? - ilen - 11 : - output_max_len ); - - if( mode == MBEDTLS_RSA_PRIVATE && ctx->padding != MBEDTLS_RSA_PKCS_V15 ) - return( MBEDTLS_ERR_RSA_BAD_INPUT_DATA ); - - if( ilen < 16 || ilen > sizeof( buf ) ) - return( MBEDTLS_ERR_RSA_BAD_INPUT_DATA ); - - ret = ( mode == MBEDTLS_RSA_PUBLIC ) - ? mbedtls_rsa_public( ctx, input, buf ) - : mbedtls_rsa_private( ctx, f_rng, p_rng, input, buf ); - - if( ret != 0 ) - goto cleanup; - - /* Check and get padding length in constant time and constant - * memory trace. The first byte must be 0. */ - bad |= buf[0]; - - if( mode == MBEDTLS_RSA_PRIVATE ) - { - /* Decode EME-PKCS1-v1_5 padding: 0x00 || 0x02 || PS || 0x00 - * where PS must be at least 8 nonzero bytes. */ - bad |= buf[1] ^ MBEDTLS_RSA_CRYPT; - - /* Read the whole buffer. Set pad_done to nonzero if we find - * the 0x00 byte and remember the padding length in pad_count. */ - for( i = 2; i < ilen; i++ ) - { - pad_done |= ((buf[i] | (unsigned char)-buf[i]) >> 7) ^ 1; - pad_count += ((pad_done | (unsigned char)-pad_done) >> 7) ^ 1; - } - } - else - { - /* Decode EMSA-PKCS1-v1_5 padding: 0x00 || 0x01 || PS || 0x00 - * where PS must be at least 8 bytes with the value 0xFF. */ - bad |= buf[1] ^ MBEDTLS_RSA_SIGN; - - /* Read the whole buffer. Set pad_done to nonzero if we find - * the 0x00 byte and remember the padding length in pad_count. - * If there's a non-0xff byte in the padding, the padding is bad. */ - for( i = 2; i < ilen; i++ ) - { - pad_done |= if_int( buf[i], 0, 1 ); - pad_count += if_int( pad_done, 0, 1 ); - bad |= if_int( pad_done, 0, buf[i] ^ 0xFF ); - } - } - - /* If pad_done is still zero, there's no data, only unfinished padding. */ - bad |= if_int( pad_done, 0, 1 ); - - /* There must be at least 8 bytes of padding. */ - bad |= size_greater_than( 8, pad_count ); - - /* If the padding is valid, set plaintext_size to the number of - * remaining bytes after stripping the padding. If the padding - * is invalid, avoid leaking this fact through the size of the - * output: use the maximum message size that fits in the output - * buffer. Do it without branches to avoid leaking the padding - * validity through timing. RSA keys are small enough that all the - * size_t values involved fit in unsigned int. */ - plaintext_size = if_int( bad, - (unsigned) plaintext_max_size, - (unsigned) ( ilen - pad_count - 3 ) ); - - /* Set output_too_large to 0 if the plaintext fits in the output - * buffer and to 1 otherwise. */ - output_too_large = size_greater_than( plaintext_size, - plaintext_max_size ); - - /* Set ret without branches to avoid timing attacks. Return: - * - INVALID_PADDING if the padding is bad (bad != 0). - * - OUTPUT_TOO_LARGE if the padding is good but the decrypted - * plaintext does not fit in the output buffer. - * - 0 if the padding is correct. */ - ret = - (int) if_int( bad, - MBEDTLS_ERR_RSA_INVALID_PADDING, - if_int( output_too_large, - MBEDTLS_ERR_RSA_OUTPUT_TOO_LARGE, - 0 ) ); - - /* If the padding is bad or the plaintext is too large, zero the - * data that we're about to copy to the output buffer. - * We need to copy the same amount of data - * from the same buffer whether the padding is good or not to - * avoid leaking the padding validity through overall timing or - * through memory or cache access patterns. */ - bad = all_or_nothing_int( bad | output_too_large ); - for( i = 11; i < ilen; i++ ) - buf[i] &= ~bad; - - /* If the plaintext is too large, truncate it to the buffer size. - * Copy anyway to avoid revealing the length through timing, because - * revealing the length is as bad as revealing the padding validity - * for a Bleichenbacher attack. */ - plaintext_size = if_int( output_too_large, - (unsigned) plaintext_max_size, - (unsigned) plaintext_size ); - - /* Move the plaintext to the leftmost position where it can start in - * the working buffer, i.e. make it start plaintext_max_size from - * the end of the buffer. Do this with a memory access trace that - * does not depend on the plaintext size. After this move, the - * starting location of the plaintext is no longer sensitive - * information. */ - mem_move_to_left( buf + ilen - plaintext_max_size, - plaintext_max_size, - plaintext_max_size - plaintext_size ); - - /* Finally copy the decrypted plaintext plus trailing zeros into the output - * buffer. If output_max_len is 0, then output may be an invalid pointer - * and the result of memcpy() would be undefined; prevent undefined - * behavior making sure to depend only on output_max_len (the size of the - * user-provided output buffer), which is independent from plaintext - * length, validity of padding, success of the decryption, and other - * secrets. */ - if( output_max_len != 0 ) - memcpy( output, buf + ilen - plaintext_max_size, plaintext_max_size ); - - /* Report the amount of data we copied to the output buffer. In case - * of errors (bad padding or output too large), the value of *olen - * when this function returns is not specified. Making it equivalent - * to the good case limits the risks of leaking the padding validity. */ - *olen = plaintext_size; - -cleanup: - mbedtls_platform_zeroize( buf, sizeof( buf ) ); - - return( ret ); -} -#endif /* MBEDTLS_PKCS1_V15 */ - -/* - * Do an RSA operation, then remove the message padding - */ -int mbedtls_rsa_pkcs1_decrypt( mbedtls_rsa_context *ctx, - int (*f_rng)(void *, unsigned char *, size_t), - void *p_rng, - int mode, size_t *olen, - const unsigned char *input, - unsigned char *output, - size_t output_max_len) -{ - RSA_VALIDATE_RET( ctx != NULL ); - RSA_VALIDATE_RET( mode == MBEDTLS_RSA_PRIVATE || - mode == MBEDTLS_RSA_PUBLIC ); - RSA_VALIDATE_RET( output_max_len == 0 || output != NULL ); - RSA_VALIDATE_RET( input != NULL ); - RSA_VALIDATE_RET( olen != NULL ); - - switch( ctx->padding ) - { -#if defined(MBEDTLS_PKCS1_V15) - case MBEDTLS_RSA_PKCS_V15: - return mbedtls_rsa_rsaes_pkcs1_v15_decrypt( ctx, f_rng, p_rng, mode, olen, - input, output, output_max_len ); -#endif - -#if defined(MBEDTLS_PKCS1_V21) - case MBEDTLS_RSA_PKCS_V21: - return mbedtls_rsa_rsaes_oaep_decrypt( ctx, f_rng, p_rng, mode, NULL, 0, - olen, input, output, - output_max_len ); -#endif - - default: - return( MBEDTLS_ERR_RSA_INVALID_PADDING ); - } -} - -#if defined(MBEDTLS_PKCS1_V21) -static int rsa_rsassa_pss_sign( mbedtls_rsa_context *ctx, - int (*f_rng)(void *, unsigned char *, size_t), - void *p_rng, - int mode, - mbedtls_md_type_t md_alg, - unsigned int hashlen, - const unsigned char *hash, - int saltlen, - unsigned char *sig ) -{ - size_t olen; - unsigned char *p = sig; - unsigned char *salt = NULL; - size_t slen, min_slen, hlen, offset = 0; - int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED; - size_t msb; - const mbedtls_md_info_t *md_info; - mbedtls_md_context_t md_ctx; - RSA_VALIDATE_RET( ctx != NULL ); - RSA_VALIDATE_RET( mode == MBEDTLS_RSA_PRIVATE || - mode == MBEDTLS_RSA_PUBLIC ); - RSA_VALIDATE_RET( ( md_alg == MBEDTLS_MD_NONE && - hashlen == 0 ) || - hash != NULL ); - RSA_VALIDATE_RET( sig != NULL ); - - if( mode == MBEDTLS_RSA_PRIVATE && ctx->padding != MBEDTLS_RSA_PKCS_V21 ) - return( MBEDTLS_ERR_RSA_BAD_INPUT_DATA ); - - if( f_rng == NULL ) - return( MBEDTLS_ERR_RSA_BAD_INPUT_DATA ); - - olen = ctx->len; - - if( md_alg != MBEDTLS_MD_NONE ) - { - /* Gather length of hash to sign */ - md_info = mbedtls_md_info_from_type( md_alg ); - if( md_info == NULL ) - return( MBEDTLS_ERR_RSA_BAD_INPUT_DATA ); - - hashlen = mbedtls_md_get_size( md_info ); - } - - md_info = mbedtls_md_info_from_type( (mbedtls_md_type_t) ctx->hash_id ); - if( md_info == NULL ) - return( MBEDTLS_ERR_RSA_BAD_INPUT_DATA ); - - hlen = mbedtls_md_get_size( md_info ); - - if (saltlen == MBEDTLS_RSA_SALT_LEN_ANY) - { - /* Calculate the largest possible salt length, up to the hash size. - * Normally this is the hash length, which is the maximum salt length - * according to FIPS 185-4 §5.5 (e) and common practice. If there is not - * enough room, use the maximum salt length that fits. The constraint is - * that the hash length plus the salt length plus 2 bytes must be at most - * the key length. This complies with FIPS 186-4 §5.5 (e) and RFC 8017 - * (PKCS#1 v2.2) §9.1.1 step 3. */ - min_slen = hlen - 2; - if( olen < hlen + min_slen + 2 ) - return( MBEDTLS_ERR_RSA_BAD_INPUT_DATA ); - else if( olen >= hlen + hlen + 2 ) - slen = hlen; - else - slen = olen - hlen - 2; - } - else if ( (saltlen < 0) || (saltlen + hlen + 2 > olen) ) - { - return( MBEDTLS_ERR_RSA_BAD_INPUT_DATA ); - } - else - { - slen = (size_t) saltlen; - } - - memset( sig, 0, olen ); - - /* Note: EMSA-PSS encoding is over the length of N - 1 bits */ - msb = mbedtls_mpi_bitlen( &ctx->N ) - 1; - p += olen - hlen - slen - 2; - *p++ = 0x01; - - /* Generate salt of length slen in place in the encoded message */ - salt = p; - if( ( ret = f_rng( p_rng, salt, slen ) ) != 0 ) - return( MBEDTLS_ERROR_ADD( MBEDTLS_ERR_RSA_RNG_FAILED, ret ) ); - - p += slen; - - mbedtls_md_init( &md_ctx ); - if( ( ret = mbedtls_md_setup( &md_ctx, md_info, 0 ) ) != 0 ) - goto exit; - - /* Generate H = Hash( M' ) */ - if( ( ret = mbedtls_md_starts( &md_ctx ) ) != 0 ) - goto exit; - if( ( ret = mbedtls_md_update( &md_ctx, p, 8 ) ) != 0 ) - goto exit; - if( ( ret = mbedtls_md_update( &md_ctx, hash, hashlen ) ) != 0 ) - goto exit; - if( ( ret = mbedtls_md_update( &md_ctx, salt, slen ) ) != 0 ) - goto exit; - if( ( ret = mbedtls_md_finish( &md_ctx, p ) ) != 0 ) - goto exit; - - /* Compensate for boundary condition when applying mask */ - if( msb % 8 == 0 ) - offset = 1; - - /* maskedDB: Apply dbMask to DB */ - if( ( ret = mgf_mask( sig + offset, olen - hlen - 1 - offset, p, hlen, - &md_ctx ) ) != 0 ) - goto exit; - - msb = mbedtls_mpi_bitlen( &ctx->N ) - 1; - sig[0] &= 0xFF >> ( olen * 8 - msb ); - - p += hlen; - *p++ = 0xBC; - -exit: - mbedtls_md_free( &md_ctx ); - - if( ret != 0 ) - return( ret ); - - return( ( mode == MBEDTLS_RSA_PUBLIC ) - ? mbedtls_rsa_public( ctx, sig, sig ) - : mbedtls_rsa_private( ctx, f_rng, p_rng, sig, sig ) ); -} - -/* - * Implementation of the PKCS#1 v2.1 RSASSA-PSS-SIGN function with - * the option to pass in the salt length. - */ -int mbedtls_rsa_rsassa_pss_sign_ext( mbedtls_rsa_context *ctx, - int (*f_rng)(void *, unsigned char *, size_t), - void *p_rng, - mbedtls_md_type_t md_alg, - unsigned int hashlen, - const unsigned char *hash, - int saltlen, - unsigned char *sig ) -{ - return rsa_rsassa_pss_sign( ctx, f_rng, p_rng, MBEDTLS_RSA_PRIVATE, md_alg, - hashlen, hash, saltlen, sig ); -} - - -/* - * Implementation of the PKCS#1 v2.1 RSASSA-PSS-SIGN function - */ -int mbedtls_rsa_rsassa_pss_sign( mbedtls_rsa_context *ctx, - int (*f_rng)(void *, unsigned char *, size_t), - void *p_rng, - int mode, - mbedtls_md_type_t md_alg, - unsigned int hashlen, - const unsigned char *hash, - unsigned char *sig ) -{ - return rsa_rsassa_pss_sign( ctx, f_rng, p_rng, mode, md_alg, - hashlen, hash, MBEDTLS_RSA_SALT_LEN_ANY, sig ); -} -#endif /* MBEDTLS_PKCS1_V21 */ - -#if defined(MBEDTLS_PKCS1_V15) -/* - * Implementation of the PKCS#1 v2.1 RSASSA-PKCS1-V1_5-SIGN function - */ - -/* Construct a PKCS v1.5 encoding of a hashed message - * - * This is used both for signature generation and verification. - * - * Parameters: - * - md_alg: Identifies the hash algorithm used to generate the given hash; - * MBEDTLS_MD_NONE if raw data is signed. - * - hashlen: Length of hash in case hashlen is MBEDTLS_MD_NONE. - * - hash: Buffer containing the hashed message or the raw data. - * - dst_len: Length of the encoded message. - * - dst: Buffer to hold the encoded message. - * - * Assumptions: - * - hash has size hashlen if md_alg == MBEDTLS_MD_NONE. - * - hash has size corresponding to md_alg if md_alg != MBEDTLS_MD_NONE. - * - dst points to a buffer of size at least dst_len. - * - */ -static int rsa_rsassa_pkcs1_v15_encode( mbedtls_md_type_t md_alg, - unsigned int hashlen, - const unsigned char *hash, - size_t dst_len, - unsigned char *dst ) -{ - size_t oid_size = 0; - size_t nb_pad = dst_len; - unsigned char *p = dst; - const char *oid = NULL; - - /* Are we signing hashed or raw data? */ - if( md_alg != MBEDTLS_MD_NONE ) - { - const mbedtls_md_info_t *md_info = mbedtls_md_info_from_type( md_alg ); - if( md_info == NULL ) - return( MBEDTLS_ERR_RSA_BAD_INPUT_DATA ); - - if( mbedtls_oid_get_oid_by_md( md_alg, &oid, &oid_size ) != 0 ) - return( MBEDTLS_ERR_RSA_BAD_INPUT_DATA ); - - hashlen = mbedtls_md_get_size( md_info ); - - /* Double-check that 8 + hashlen + oid_size can be used as a - * 1-byte ASN.1 length encoding and that there's no overflow. */ - if( 8 + hashlen + oid_size >= 0x80 || - 10 + hashlen < hashlen || - 10 + hashlen + oid_size < 10 + hashlen ) - return( MBEDTLS_ERR_RSA_BAD_INPUT_DATA ); - - /* - * Static bounds check: - * - Need 10 bytes for five tag-length pairs. - * (Insist on 1-byte length encodings to protect against variants of - * Bleichenbacher's forgery attack against lax PKCS#1v1.5 verification) - * - Need hashlen bytes for hash - * - Need oid_size bytes for hash alg OID. - */ - if( nb_pad < 10 + hashlen + oid_size ) - return( MBEDTLS_ERR_RSA_BAD_INPUT_DATA ); - nb_pad -= 10 + hashlen + oid_size; - } - else - { - if( nb_pad < hashlen ) - return( MBEDTLS_ERR_RSA_BAD_INPUT_DATA ); - - nb_pad -= hashlen; - } - - /* Need space for signature header and padding delimiter (3 bytes), - * and 8 bytes for the minimal padding */ - if( nb_pad < 3 + 8 ) - return( MBEDTLS_ERR_RSA_BAD_INPUT_DATA ); - nb_pad -= 3; - - /* Now nb_pad is the amount of memory to be filled - * with padding, and at least 8 bytes long. */ - - /* Write signature header and padding */ - *p++ = 0; - *p++ = MBEDTLS_RSA_SIGN; - memset( p, 0xFF, nb_pad ); - p += nb_pad; - *p++ = 0; - - /* Are we signing raw data? */ - if( md_alg == MBEDTLS_MD_NONE ) - { - memcpy( p, hash, hashlen ); - return( 0 ); - } - - /* Signing hashed data, add corresponding ASN.1 structure - * - * DigestInfo ::= SEQUENCE { - * digestAlgorithm DigestAlgorithmIdentifier, - * digest Digest } - * DigestAlgorithmIdentifier ::= AlgorithmIdentifier - * Digest ::= OCTET STRING - * - * Schematic: - * TAG-SEQ + LEN [ TAG-SEQ + LEN [ TAG-OID + LEN [ OID ] - * TAG-NULL + LEN [ NULL ] ] - * TAG-OCTET + LEN [ HASH ] ] - */ - *p++ = MBEDTLS_ASN1_SEQUENCE | MBEDTLS_ASN1_CONSTRUCTED; - *p++ = (unsigned char)( 0x08 + oid_size + hashlen ); - *p++ = MBEDTLS_ASN1_SEQUENCE | MBEDTLS_ASN1_CONSTRUCTED; - *p++ = (unsigned char)( 0x04 + oid_size ); - *p++ = MBEDTLS_ASN1_OID; - *p++ = (unsigned char) oid_size; - memcpy( p, oid, oid_size ); - p += oid_size; - *p++ = MBEDTLS_ASN1_NULL; - *p++ = 0x00; - *p++ = MBEDTLS_ASN1_OCTET_STRING; - *p++ = (unsigned char) hashlen; - memcpy( p, hash, hashlen ); - p += hashlen; - - /* Just a sanity-check, should be automatic - * after the initial bounds check. */ - if( p != dst + dst_len ) - { - mbedtls_platform_zeroize( dst, dst_len ); - return( MBEDTLS_ERR_RSA_BAD_INPUT_DATA ); - } - - return( 0 ); -} - -/* - * Do an RSA operation to sign the message digest - */ -int mbedtls_rsa_rsassa_pkcs1_v15_sign( mbedtls_rsa_context *ctx, - int (*f_rng)(void *, unsigned char *, size_t), - void *p_rng, - int mode, - mbedtls_md_type_t md_alg, - unsigned int hashlen, - const unsigned char *hash, - unsigned char *sig ) -{ - int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED; - unsigned char *sig_try = NULL, *verif = NULL; - - RSA_VALIDATE_RET( ctx != NULL ); - RSA_VALIDATE_RET( mode == MBEDTLS_RSA_PRIVATE || - mode == MBEDTLS_RSA_PUBLIC ); - RSA_VALIDATE_RET( ( md_alg == MBEDTLS_MD_NONE && - hashlen == 0 ) || - hash != NULL ); - RSA_VALIDATE_RET( sig != NULL ); - - if( mode == MBEDTLS_RSA_PRIVATE && ctx->padding != MBEDTLS_RSA_PKCS_V15 ) - return( MBEDTLS_ERR_RSA_BAD_INPUT_DATA ); - - /* - * Prepare PKCS1-v1.5 encoding (padding and hash identifier) - */ - - if( ( ret = rsa_rsassa_pkcs1_v15_encode( md_alg, hashlen, hash, - ctx->len, sig ) ) != 0 ) - return( ret ); - - /* - * Call respective RSA primitive - */ - - if( mode == MBEDTLS_RSA_PUBLIC ) - { - /* Skip verification on a public key operation */ - return( mbedtls_rsa_public( ctx, sig, sig ) ); - } - - /* Private key operation - * - * In order to prevent Lenstra's attack, make the signature in a - * temporary buffer and check it before returning it. - */ - - sig_try = mbedtls_calloc( 1, ctx->len ); - if( sig_try == NULL ) - return( MBEDTLS_ERR_MPI_ALLOC_FAILED ); - - verif = mbedtls_calloc( 1, ctx->len ); - if( verif == NULL ) - { - mbedtls_free( sig_try ); - return( MBEDTLS_ERR_MPI_ALLOC_FAILED ); - } - - MBEDTLS_MPI_CHK( mbedtls_rsa_private( ctx, f_rng, p_rng, sig, sig_try ) ); - MBEDTLS_MPI_CHK( mbedtls_rsa_public( ctx, sig_try, verif ) ); - - if( mbedtls_safer_memcmp( verif, sig, ctx->len ) != 0 ) - { - ret = MBEDTLS_ERR_RSA_PRIVATE_FAILED; - goto cleanup; - } - - memcpy( sig, sig_try, ctx->len ); - -cleanup: - mbedtls_free( sig_try ); - mbedtls_free( verif ); - - return( ret ); -} -#endif /* MBEDTLS_PKCS1_V15 */ - -/* - * Do an RSA operation to sign the message digest - */ -int mbedtls_rsa_pkcs1_sign( mbedtls_rsa_context *ctx, - int (*f_rng)(void *, unsigned char *, size_t), - void *p_rng, - int mode, - mbedtls_md_type_t md_alg, - unsigned int hashlen, - const unsigned char *hash, - unsigned char *sig ) -{ - RSA_VALIDATE_RET( ctx != NULL ); - RSA_VALIDATE_RET( mode == MBEDTLS_RSA_PRIVATE || - mode == MBEDTLS_RSA_PUBLIC ); - RSA_VALIDATE_RET( ( md_alg == MBEDTLS_MD_NONE && - hashlen == 0 ) || - hash != NULL ); - RSA_VALIDATE_RET( sig != NULL ); - - switch( ctx->padding ) - { -#if defined(MBEDTLS_PKCS1_V15) - case MBEDTLS_RSA_PKCS_V15: - return mbedtls_rsa_rsassa_pkcs1_v15_sign( ctx, f_rng, p_rng, mode, md_alg, - hashlen, hash, sig ); -#endif - -#if defined(MBEDTLS_PKCS1_V21) - case MBEDTLS_RSA_PKCS_V21: - return mbedtls_rsa_rsassa_pss_sign( ctx, f_rng, p_rng, mode, md_alg, - hashlen, hash, sig ); -#endif - - default: - return( MBEDTLS_ERR_RSA_INVALID_PADDING ); - } -} - -#if defined(MBEDTLS_PKCS1_V21) -/* - * Implementation of the PKCS#1 v2.1 RSASSA-PSS-VERIFY function - */ -int mbedtls_rsa_rsassa_pss_verify_ext( mbedtls_rsa_context *ctx, - int (*f_rng)(void *, unsigned char *, size_t), - void *p_rng, - int mode, - mbedtls_md_type_t md_alg, - unsigned int hashlen, - const unsigned char *hash, - mbedtls_md_type_t mgf1_hash_id, - int expected_salt_len, - const unsigned char *sig ) -{ - int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED; - size_t siglen; - unsigned char *p; - unsigned char *hash_start; - unsigned char result[MBEDTLS_MD_MAX_SIZE]; - unsigned char zeros[8]; - unsigned int hlen; - size_t observed_salt_len, msb; - const mbedtls_md_info_t *md_info; - mbedtls_md_context_t md_ctx; - unsigned char buf[MBEDTLS_MPI_MAX_SIZE]; - - RSA_VALIDATE_RET( ctx != NULL ); - RSA_VALIDATE_RET( mode == MBEDTLS_RSA_PRIVATE || - mode == MBEDTLS_RSA_PUBLIC ); - RSA_VALIDATE_RET( sig != NULL ); - RSA_VALIDATE_RET( ( md_alg == MBEDTLS_MD_NONE && - hashlen == 0 ) || - hash != NULL ); - - if( mode == MBEDTLS_RSA_PRIVATE && ctx->padding != MBEDTLS_RSA_PKCS_V21 ) - return( MBEDTLS_ERR_RSA_BAD_INPUT_DATA ); - - siglen = ctx->len; - - if( siglen < 16 || siglen > sizeof( buf ) ) - return( MBEDTLS_ERR_RSA_BAD_INPUT_DATA ); - - ret = ( mode == MBEDTLS_RSA_PUBLIC ) - ? mbedtls_rsa_public( ctx, sig, buf ) - : mbedtls_rsa_private( ctx, f_rng, p_rng, sig, buf ); - - if( ret != 0 ) - return( ret ); - - p = buf; - - if( buf[siglen - 1] != 0xBC ) - return( MBEDTLS_ERR_RSA_INVALID_PADDING ); - - if( md_alg != MBEDTLS_MD_NONE ) - { - /* Gather length of hash to sign */ - md_info = mbedtls_md_info_from_type( md_alg ); - if( md_info == NULL ) - return( MBEDTLS_ERR_RSA_BAD_INPUT_DATA ); - - hashlen = mbedtls_md_get_size( md_info ); - } - - md_info = mbedtls_md_info_from_type( mgf1_hash_id ); - if( md_info == NULL ) - return( MBEDTLS_ERR_RSA_BAD_INPUT_DATA ); - - hlen = mbedtls_md_get_size( md_info ); - - memset( zeros, 0, 8 ); - - /* - * Note: EMSA-PSS verification is over the length of N - 1 bits - */ - msb = mbedtls_mpi_bitlen( &ctx->N ) - 1; - - if( buf[0] >> ( 8 - siglen * 8 + msb ) ) - return( MBEDTLS_ERR_RSA_BAD_INPUT_DATA ); - - /* Compensate for boundary condition when applying mask */ - if( msb % 8 == 0 ) - { - p++; - siglen -= 1; - } - - if( siglen < hlen + 2 ) - return( MBEDTLS_ERR_RSA_BAD_INPUT_DATA ); - hash_start = p + siglen - hlen - 1; - - mbedtls_md_init( &md_ctx ); - if( ( ret = mbedtls_md_setup( &md_ctx, md_info, 0 ) ) != 0 ) - goto exit; - - ret = mgf_mask( p, siglen - hlen - 1, hash_start, hlen, &md_ctx ); - if( ret != 0 ) - goto exit; - - buf[0] &= 0xFF >> ( siglen * 8 - msb ); - - while( p < hash_start - 1 && *p == 0 ) - p++; - - if( *p++ != 0x01 ) - { - ret = MBEDTLS_ERR_RSA_INVALID_PADDING; - goto exit; - } - - observed_salt_len = hash_start - p; - - if( expected_salt_len != MBEDTLS_RSA_SALT_LEN_ANY && - observed_salt_len != (size_t) expected_salt_len ) - { - ret = MBEDTLS_ERR_RSA_INVALID_PADDING; - goto exit; - } - - /* - * Generate H = Hash( M' ) - */ - ret = mbedtls_md_starts( &md_ctx ); - if ( ret != 0 ) - goto exit; - ret = mbedtls_md_update( &md_ctx, zeros, 8 ); - if ( ret != 0 ) - goto exit; - ret = mbedtls_md_update( &md_ctx, hash, hashlen ); - if ( ret != 0 ) - goto exit; - ret = mbedtls_md_update( &md_ctx, p, observed_salt_len ); - if ( ret != 0 ) - goto exit; - ret = mbedtls_md_finish( &md_ctx, result ); - if ( ret != 0 ) - goto exit; - - if( memcmp( hash_start, result, hlen ) != 0 ) - { - ret = MBEDTLS_ERR_RSA_VERIFY_FAILED; - goto exit; - } - -exit: - mbedtls_md_free( &md_ctx ); - - return( ret ); -} - -/* - * Simplified PKCS#1 v2.1 RSASSA-PSS-VERIFY function - */ -int mbedtls_rsa_rsassa_pss_verify( mbedtls_rsa_context *ctx, - int (*f_rng)(void *, unsigned char *, size_t), - void *p_rng, - int mode, - mbedtls_md_type_t md_alg, - unsigned int hashlen, - const unsigned char *hash, - const unsigned char *sig ) -{ - mbedtls_md_type_t mgf1_hash_id; - RSA_VALIDATE_RET( ctx != NULL ); - RSA_VALIDATE_RET( mode == MBEDTLS_RSA_PRIVATE || - mode == MBEDTLS_RSA_PUBLIC ); - RSA_VALIDATE_RET( sig != NULL ); - RSA_VALIDATE_RET( ( md_alg == MBEDTLS_MD_NONE && - hashlen == 0 ) || - hash != NULL ); - - mgf1_hash_id = ( ctx->hash_id != MBEDTLS_MD_NONE ) - ? (mbedtls_md_type_t) ctx->hash_id - : md_alg; - - return( mbedtls_rsa_rsassa_pss_verify_ext( ctx, f_rng, p_rng, mode, - md_alg, hashlen, hash, - mgf1_hash_id, MBEDTLS_RSA_SALT_LEN_ANY, - sig ) ); - -} -#endif /* MBEDTLS_PKCS1_V21 */ - -#if defined(MBEDTLS_PKCS1_V15) -/* - * Implementation of the PKCS#1 v2.1 RSASSA-PKCS1-v1_5-VERIFY function - */ -int mbedtls_rsa_rsassa_pkcs1_v15_verify( mbedtls_rsa_context *ctx, - int (*f_rng)(void *, unsigned char *, size_t), - void *p_rng, - int mode, - mbedtls_md_type_t md_alg, - unsigned int hashlen, - const unsigned char *hash, - const unsigned char *sig ) -{ - int ret = 0; - size_t sig_len; - unsigned char *encoded = NULL, *encoded_expected = NULL; - - RSA_VALIDATE_RET( ctx != NULL ); - RSA_VALIDATE_RET( mode == MBEDTLS_RSA_PRIVATE || - mode == MBEDTLS_RSA_PUBLIC ); - RSA_VALIDATE_RET( sig != NULL ); - RSA_VALIDATE_RET( ( md_alg == MBEDTLS_MD_NONE && - hashlen == 0 ) || - hash != NULL ); - - sig_len = ctx->len; - - if( mode == MBEDTLS_RSA_PRIVATE && ctx->padding != MBEDTLS_RSA_PKCS_V15 ) - return( MBEDTLS_ERR_RSA_BAD_INPUT_DATA ); - - /* - * Prepare expected PKCS1 v1.5 encoding of hash. - */ - - if( ( encoded = mbedtls_calloc( 1, sig_len ) ) == NULL || - ( encoded_expected = mbedtls_calloc( 1, sig_len ) ) == NULL ) - { - ret = MBEDTLS_ERR_MPI_ALLOC_FAILED; - goto cleanup; - } - - if( ( ret = rsa_rsassa_pkcs1_v15_encode( md_alg, hashlen, hash, sig_len, - encoded_expected ) ) != 0 ) - goto cleanup; - - /* - * Apply RSA primitive to get what should be PKCS1 encoded hash. - */ - - ret = ( mode == MBEDTLS_RSA_PUBLIC ) - ? mbedtls_rsa_public( ctx, sig, encoded ) - : mbedtls_rsa_private( ctx, f_rng, p_rng, sig, encoded ); - if( ret != 0 ) - goto cleanup; - - /* - * Compare - */ - - if( ( ret = mbedtls_safer_memcmp( encoded, encoded_expected, - sig_len ) ) != 0 ) - { - ret = MBEDTLS_ERR_RSA_VERIFY_FAILED; - goto cleanup; - } - -cleanup: - - if( encoded != NULL ) - { - mbedtls_platform_zeroize( encoded, sig_len ); - mbedtls_free( encoded ); - } - - if( encoded_expected != NULL ) - { - mbedtls_platform_zeroize( encoded_expected, sig_len ); - mbedtls_free( encoded_expected ); - } - - return( ret ); -} -#endif /* MBEDTLS_PKCS1_V15 */ - -/* - * Do an RSA operation and check the message digest - */ -int mbedtls_rsa_pkcs1_verify( mbedtls_rsa_context *ctx, - int (*f_rng)(void *, unsigned char *, size_t), - void *p_rng, - int mode, - mbedtls_md_type_t md_alg, - unsigned int hashlen, - const unsigned char *hash, - const unsigned char *sig ) -{ - RSA_VALIDATE_RET( ctx != NULL ); - RSA_VALIDATE_RET( mode == MBEDTLS_RSA_PRIVATE || - mode == MBEDTLS_RSA_PUBLIC ); - RSA_VALIDATE_RET( sig != NULL ); - RSA_VALIDATE_RET( ( md_alg == MBEDTLS_MD_NONE && - hashlen == 0 ) || - hash != NULL ); - - switch( ctx->padding ) - { -#if defined(MBEDTLS_PKCS1_V15) - case MBEDTLS_RSA_PKCS_V15: - return mbedtls_rsa_rsassa_pkcs1_v15_verify( ctx, f_rng, p_rng, mode, md_alg, - hashlen, hash, sig ); -#endif - -#if defined(MBEDTLS_PKCS1_V21) - case MBEDTLS_RSA_PKCS_V21: - return mbedtls_rsa_rsassa_pss_verify( ctx, f_rng, p_rng, mode, md_alg, - hashlen, hash, sig ); -#endif - - default: - return( MBEDTLS_ERR_RSA_INVALID_PADDING ); - } -} - -/* - * Copy the components of an RSA key - */ -int mbedtls_rsa_copy( mbedtls_rsa_context *dst, const mbedtls_rsa_context *src ) -{ - int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED; - RSA_VALIDATE_RET( dst != NULL ); - RSA_VALIDATE_RET( src != NULL ); - - dst->len = src->len; - - MBEDTLS_MPI_CHK( mbedtls_mpi_copy( &dst->N, &src->N ) ); - MBEDTLS_MPI_CHK( mbedtls_mpi_copy( &dst->E, &src->E ) ); - - MBEDTLS_MPI_CHK( mbedtls_mpi_copy( &dst->D, &src->D ) ); - MBEDTLS_MPI_CHK( mbedtls_mpi_copy( &dst->P, &src->P ) ); - MBEDTLS_MPI_CHK( mbedtls_mpi_copy( &dst->Q, &src->Q ) ); - -#if !defined(MBEDTLS_RSA_NO_CRT) - MBEDTLS_MPI_CHK( mbedtls_mpi_copy( &dst->DP, &src->DP ) ); - MBEDTLS_MPI_CHK( mbedtls_mpi_copy( &dst->DQ, &src->DQ ) ); - MBEDTLS_MPI_CHK( mbedtls_mpi_copy( &dst->QP, &src->QP ) ); - MBEDTLS_MPI_CHK( mbedtls_mpi_copy( &dst->RP, &src->RP ) ); - MBEDTLS_MPI_CHK( mbedtls_mpi_copy( &dst->RQ, &src->RQ ) ); -#endif - - MBEDTLS_MPI_CHK( mbedtls_mpi_copy( &dst->RN, &src->RN ) ); - - MBEDTLS_MPI_CHK( mbedtls_mpi_copy( &dst->Vi, &src->Vi ) ); - MBEDTLS_MPI_CHK( mbedtls_mpi_copy( &dst->Vf, &src->Vf ) ); - - dst->padding = src->padding; - dst->hash_id = src->hash_id; - -cleanup: - if( ret != 0 ) - mbedtls_rsa_free( dst ); - - return( ret ); -} - -/* - * Free the components of an RSA key - */ -void mbedtls_rsa_free( mbedtls_rsa_context *ctx ) -{ - if( ctx == NULL ) - return; - - mbedtls_mpi_free( &ctx->Vi ); - mbedtls_mpi_free( &ctx->Vf ); - mbedtls_mpi_free( &ctx->RN ); - mbedtls_mpi_free( &ctx->D ); - mbedtls_mpi_free( &ctx->Q ); - mbedtls_mpi_free( &ctx->P ); - mbedtls_mpi_free( &ctx->E ); - mbedtls_mpi_free( &ctx->N ); - -#if !defined(MBEDTLS_RSA_NO_CRT) - mbedtls_mpi_free( &ctx->RQ ); - mbedtls_mpi_free( &ctx->RP ); - mbedtls_mpi_free( &ctx->QP ); - mbedtls_mpi_free( &ctx->DQ ); - mbedtls_mpi_free( &ctx->DP ); -#endif /* MBEDTLS_RSA_NO_CRT */ - -#if defined(MBEDTLS_THREADING_C) - /* Free the mutex, but only if it hasn't been freed already. */ - if( ctx->ver != 0 ) - { - mbedtls_mutex_free( &ctx->mutex ); - ctx->ver = 0; - } -#endif -} - -#endif /* !MBEDTLS_RSA_ALT */ - -#if defined(MBEDTLS_SELF_TEST) - -#include "mbedtls/sha1.h" - -/* - * Example RSA-1024 keypair, for test purposes - */ -#define KEY_LEN 128 - -#define RSA_N "9292758453063D803DD603D5E777D788" \ - "8ED1D5BF35786190FA2F23EBC0848AEA" \ - "DDA92CA6C3D80B32C4D109BE0F36D6AE" \ - "7130B9CED7ACDF54CFC7555AC14EEBAB" \ - "93A89813FBF3C4F8066D2D800F7C38A8" \ - "1AE31942917403FF4946B0A83D3D3E05" \ - "EE57C6F5F5606FB5D4BC6CD34EE0801A" \ - "5E94BB77B07507233A0BC7BAC8F90F79" - -#define RSA_E "10001" - -#define RSA_D "24BF6185468786FDD303083D25E64EFC" \ - "66CA472BC44D253102F8B4A9D3BFA750" \ - "91386C0077937FE33FA3252D28855837" \ - "AE1B484A8A9A45F7EE8C0C634F99E8CD" \ - "DF79C5CE07EE72C7F123142198164234" \ - "CABB724CF78B8173B9F880FC86322407" \ - "AF1FEDFDDE2BEB674CA15F3E81A1521E" \ - "071513A1E85B5DFA031F21ECAE91A34D" - -#define RSA_P "C36D0EB7FCD285223CFB5AABA5BDA3D8" \ - "2C01CAD19EA484A87EA4377637E75500" \ - "FCB2005C5C7DD6EC4AC023CDA285D796" \ - "C3D9E75E1EFC42488BB4F1D13AC30A57" - -#define RSA_Q "C000DF51A7C77AE8D7C7370C1FF55B69" \ - "E211C2B9E5DB1ED0BF61D0D9899620F4" \ - "910E4168387E3C30AA1E00C339A79508" \ - "8452DD96A9A5EA5D9DCA68DA636032AF" - -#define PT_LEN 24 -#define RSA_PT "\xAA\xBB\xCC\x03\x02\x01\x00\xFF\xFF\xFF\xFF\xFF" \ - "\x11\x22\x33\x0A\x0B\x0C\xCC\xDD\xDD\xDD\xDD\xDD" - -#if defined(MBEDTLS_PKCS1_V15) -static int myrand( void *rng_state, unsigned char *output, size_t len ) -{ -#if !defined(__OpenBSD__) && !defined(__NetBSD__) - size_t i; - - if( rng_state != NULL ) - rng_state = NULL; - - for( i = 0; i < len; ++i ) - output[i] = rand(); -#else - if( rng_state != NULL ) - rng_state = NULL; - - arc4random_buf( output, len ); -#endif /* !OpenBSD && !NetBSD */ - - return( 0 ); -} -#endif /* MBEDTLS_PKCS1_V15 */ - -/* - * Checkup routine - */ -int mbedtls_rsa_self_test( int verbose ) -{ - int ret = 0; -#if defined(MBEDTLS_PKCS1_V15) - size_t len; - mbedtls_rsa_context rsa; - unsigned char rsa_plaintext[PT_LEN]; - unsigned char rsa_decrypted[PT_LEN]; - unsigned char rsa_ciphertext[KEY_LEN]; -#if defined(MBEDTLS_SHA1_C) - unsigned char sha1sum[20]; -#endif - - mbedtls_mpi K; - - mbedtls_mpi_init( &K ); - mbedtls_rsa_init( &rsa, MBEDTLS_RSA_PKCS_V15, 0 ); - - MBEDTLS_MPI_CHK( mbedtls_mpi_read_string( &K, 16, RSA_N ) ); - MBEDTLS_MPI_CHK( mbedtls_rsa_import( &rsa, &K, NULL, NULL, NULL, NULL ) ); - MBEDTLS_MPI_CHK( mbedtls_mpi_read_string( &K, 16, RSA_P ) ); - MBEDTLS_MPI_CHK( mbedtls_rsa_import( &rsa, NULL, &K, NULL, NULL, NULL ) ); - MBEDTLS_MPI_CHK( mbedtls_mpi_read_string( &K, 16, RSA_Q ) ); - MBEDTLS_MPI_CHK( mbedtls_rsa_import( &rsa, NULL, NULL, &K, NULL, NULL ) ); - MBEDTLS_MPI_CHK( mbedtls_mpi_read_string( &K, 16, RSA_D ) ); - MBEDTLS_MPI_CHK( mbedtls_rsa_import( &rsa, NULL, NULL, NULL, &K, NULL ) ); - MBEDTLS_MPI_CHK( mbedtls_mpi_read_string( &K, 16, RSA_E ) ); - MBEDTLS_MPI_CHK( mbedtls_rsa_import( &rsa, NULL, NULL, NULL, NULL, &K ) ); - - MBEDTLS_MPI_CHK( mbedtls_rsa_complete( &rsa ) ); - - if( verbose != 0 ) - mbedtls_printf( " RSA key validation: " ); - - if( mbedtls_rsa_check_pubkey( &rsa ) != 0 || - mbedtls_rsa_check_privkey( &rsa ) != 0 ) - { - if( verbose != 0 ) - mbedtls_printf( "failed\n" ); - - ret = 1; - goto cleanup; - } - - if( verbose != 0 ) - mbedtls_printf( "passed\n PKCS#1 encryption : " ); - - memcpy( rsa_plaintext, RSA_PT, PT_LEN ); - - if( mbedtls_rsa_pkcs1_encrypt( &rsa, myrand, NULL, MBEDTLS_RSA_PUBLIC, - PT_LEN, rsa_plaintext, - rsa_ciphertext ) != 0 ) - { - if( verbose != 0 ) - mbedtls_printf( "failed\n" ); - - ret = 1; - goto cleanup; - } - - if( verbose != 0 ) - mbedtls_printf( "passed\n PKCS#1 decryption : " ); - - if( mbedtls_rsa_pkcs1_decrypt( &rsa, myrand, NULL, MBEDTLS_RSA_PRIVATE, - &len, rsa_ciphertext, rsa_decrypted, - sizeof(rsa_decrypted) ) != 0 ) - { - if( verbose != 0 ) - mbedtls_printf( "failed\n" ); - - ret = 1; - goto cleanup; - } - - if( memcmp( rsa_decrypted, rsa_plaintext, len ) != 0 ) - { - if( verbose != 0 ) - mbedtls_printf( "failed\n" ); - - ret = 1; - goto cleanup; - } - - if( verbose != 0 ) - mbedtls_printf( "passed\n" ); - -#if defined(MBEDTLS_SHA1_C) - if( verbose != 0 ) - mbedtls_printf( " PKCS#1 data sign : " ); - - if( mbedtls_sha1_ret( rsa_plaintext, PT_LEN, sha1sum ) != 0 ) - { - if( verbose != 0 ) - mbedtls_printf( "failed\n" ); - - return( 1 ); - } - - if( mbedtls_rsa_pkcs1_sign( &rsa, myrand, NULL, - MBEDTLS_RSA_PRIVATE, MBEDTLS_MD_SHA1, 0, - sha1sum, rsa_ciphertext ) != 0 ) - { - if( verbose != 0 ) - mbedtls_printf( "failed\n" ); - - ret = 1; - goto cleanup; - } - - if( verbose != 0 ) - mbedtls_printf( "passed\n PKCS#1 sig. verify: " ); - - if( mbedtls_rsa_pkcs1_verify( &rsa, NULL, NULL, - MBEDTLS_RSA_PUBLIC, MBEDTLS_MD_SHA1, 0, - sha1sum, rsa_ciphertext ) != 0 ) - { - if( verbose != 0 ) - mbedtls_printf( "failed\n" ); - - ret = 1; - goto cleanup; - } - - if( verbose != 0 ) - mbedtls_printf( "passed\n" ); -#endif /* MBEDTLS_SHA1_C */ - - if( verbose != 0 ) - mbedtls_printf( "\n" ); - -cleanup: - mbedtls_mpi_free( &K ); - mbedtls_rsa_free( &rsa ); -#else /* MBEDTLS_PKCS1_V15 */ - ((void) verbose); -#endif /* MBEDTLS_PKCS1_V15 */ - return( ret ); -} - -#endif /* MBEDTLS_SELF_TEST */ - -#endif /* MBEDTLS_RSA_C */ -- cgit v1.2.3