Removed old mbedtls, replacing with submodule.

1 files changed, 0 insertions, 308 deletions

diff --git a/lib/mbedtls-2.27.0/include/mbedtls/ccm.h b/lib/mbedtls-2.27.0/include/mbedtls/ccm.h
deleted file mode 100644
index 7193863..0000000
--- a/lib/mbedtls-2.27.0/include/mbedtls/ccm.h
+++ /dev/null
@@ -1,308 +0,0 @@
-/**
- * \file ccm.h
- *
- * \brief This file provides an API for the CCM authenticated encryption
- *        mode for block ciphers.
- *
- * CCM combines Counter mode encryption with CBC-MAC authentication
- * for 128-bit block ciphers.
- *
- * Input to CCM includes the following elements:
- * <ul><li>Payload - data that is both authenticated and encrypted.</li>
- * <li>Associated data (Adata) - data that is authenticated but not
- * encrypted, For example, a header.</li>
- * <li>Nonce - A unique value that is assigned to the payload and the
- * associated data.</li></ul>
- *
- * Definition of CCM:
- * http://csrc.nist.gov/publications/nistpubs/800-38C/SP800-38C_updated-July20_2007.pdf
- * RFC 3610 "Counter with CBC-MAC (CCM)"
- *
- * Related:
- * RFC 5116 "An Interface and Algorithms for Authenticated Encryption"
- *
- * Definition of CCM*:
- * IEEE 802.15.4 - IEEE Standard for Local and metropolitan area networks
- * Integer representation is fixed most-significant-octet-first order and
- * the representation of octets is most-significant-bit-first order. This is
- * consistent with RFC 3610.
- */
-/*
- *  Copyright The Mbed TLS Contributors
- *  SPDX-License-Identifier: Apache-2.0
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may
- *  not use this file except in compliance with the License.
- *  You may obtain a copy of the License at
- *
- *  http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software
- *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
- *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- *  See the License for the specific language governing permissions and
- *  limitations under the License.
- */
-
-#ifndef MBEDTLS_CCM_H
-#define MBEDTLS_CCM_H
-
-#if !defined(MBEDTLS_CONFIG_FILE)
-#include "mbedtls/config.h"
-#else
-#include MBEDTLS_CONFIG_FILE
-#endif
-
-#include "mbedtls/cipher.h"
-
-#define MBEDTLS_ERR_CCM_BAD_INPUT       -0x000D /**< Bad input parameters to the function. */
-#define MBEDTLS_ERR_CCM_AUTH_FAILED     -0x000F /**< Authenticated decryption failed. */
-
-/* MBEDTLS_ERR_CCM_HW_ACCEL_FAILED is deprecated and should not be used. */
-#define MBEDTLS_ERR_CCM_HW_ACCEL_FAILED -0x0011 /**< CCM hardware accelerator failed. */
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#if !defined(MBEDTLS_CCM_ALT)
-// Regular implementation
-//
-
-/**
- * \brief    The CCM context-type definition. The CCM context is passed
- *           to the APIs called.
- */
-typedef struct mbedtls_ccm_context
-{
-    mbedtls_cipher_context_t cipher_ctx;    /*!< The cipher context used. */
-}
-mbedtls_ccm_context;
-
-#else  /* MBEDTLS_CCM_ALT */
-#include "ccm_alt.h"
-#endif /* MBEDTLS_CCM_ALT */
-
-/**
- * \brief           This function initializes the specified CCM context,
- *                  to make references valid, and prepare the context
- *                  for mbedtls_ccm_setkey() or mbedtls_ccm_free().
- *
- * \param ctx       The CCM context to initialize. This must not be \c NULL.
- */
-void mbedtls_ccm_init( mbedtls_ccm_context *ctx );
-
-/**
- * \brief           This function initializes the CCM context set in the
- *                  \p ctx parameter and sets the encryption key.
- *
- * \param ctx       The CCM context to initialize. This must be an initialized
- *                  context.
- * \param cipher    The 128-bit block cipher to use.
- * \param key       The encryption key. This must not be \c NULL.
- * \param keybits   The key size in bits. This must be acceptable by the cipher.
- *
- * \return          \c 0 on success.
- * \return          A CCM or cipher-specific error code on failure.
- */
-int mbedtls_ccm_setkey( mbedtls_ccm_context *ctx,
-                        mbedtls_cipher_id_t cipher,
-                        const unsigned char *key,
-                        unsigned int keybits );
-
-/**
- * \brief   This function releases and clears the specified CCM context
- *          and underlying cipher sub-context.
- *
- * \param ctx       The CCM context to clear. If this is \c NULL, the function
- *                  has no effect. Otherwise, this must be initialized.
- */
-void mbedtls_ccm_free( mbedtls_ccm_context *ctx );
-
-/**
- * \brief           This function encrypts a buffer using CCM.
- *
- * \note            The tag is written to a separate buffer. To concatenate
- *                  the \p tag with the \p output, as done in <em>RFC-3610:
- *                  Counter with CBC-MAC (CCM)</em>, use
- *                  \p tag = \p output + \p length, and make sure that the
- *                  output buffer is at least \p length + \p tag_len wide.
- *
- * \param ctx       The CCM context to use for encryption. This must be
- *                  initialized and bound to a key.
- * \param length    The length of the input data in Bytes.
- * \param iv        The initialization vector (nonce). This must be a readable
- *                  buffer of at least \p iv_len Bytes.
- * \param iv_len    The length of the nonce in Bytes: 7, 8, 9, 10, 11, 12,
- *                  or 13. The length L of the message length field is
- *                  15 - \p iv_len.
- * \param add       The additional data field. If \p add_len is greater than
- *                  zero, \p add must be a readable buffer of at least that
- *                  length.
- * \param add_len   The length of additional data in Bytes.
- *                  This must be less than `2^16 - 2^8`.
- * \param input     The buffer holding the input data. If \p length is greater
- *                  than zero, \p input must be a readable buffer of at least
- *                  that length.
- * \param output    The buffer holding the output data. If \p length is greater
- *                  than zero, \p output must be a writable buffer of at least
- *                  that length.
- * \param tag       The buffer holding the authentication field. This must be a
- *                  writable buffer of at least \p tag_len Bytes.
- * \param tag_len   The length of the authentication field to generate in Bytes:
- *                  4, 6, 8, 10, 12, 14 or 16.
- *
- * \return          \c 0 on success.
- * \return          A CCM or cipher-specific error code on failure.
- */
-int mbedtls_ccm_encrypt_and_tag( mbedtls_ccm_context *ctx, size_t length,
-                         const unsigned char *iv, size_t iv_len,
-                         const unsigned char *add, size_t add_len,
-                         const unsigned char *input, unsigned char *output,
-                         unsigned char *tag, size_t tag_len );
-
-/**
- * \brief           This function encrypts a buffer using CCM*.
- *
- * \note            The tag is written to a separate buffer. To concatenate
- *                  the \p tag with the \p output, as done in <em>RFC-3610:
- *                  Counter with CBC-MAC (CCM)</em>, use
- *                  \p tag = \p output + \p length, and make sure that the
- *                  output buffer is at least \p length + \p tag_len wide.
- *
- * \note            When using this function in a variable tag length context,
- *                  the tag length has to be encoded into the \p iv passed to
- *                  this function.
- *
- * \param ctx       The CCM context to use for encryption. This must be
- *                  initialized and bound to a key.
- * \param length    The length of the input data in Bytes.
- * \param iv        The initialization vector (nonce). This must be a readable
- *                  buffer of at least \p iv_len Bytes.
- * \param iv_len    The length of the nonce in Bytes: 7, 8, 9, 10, 11, 12,
- *                  or 13. The length L of the message length field is
- *                  15 - \p iv_len.
- * \param add       The additional data field. This must be a readable buffer of
- *                  at least \p add_len Bytes.
- * \param add_len   The length of additional data in Bytes.
- *                  This must be less than 2^16 - 2^8.
- * \param input     The buffer holding the input data. If \p length is greater
- *                  than zero, \p input must be a readable buffer of at least
- *                  that length.
- * \param output    The buffer holding the output data. If \p length is greater
- *                  than zero, \p output must be a writable buffer of at least
- *                  that length.
- * \param tag       The buffer holding the authentication field. This must be a
- *                  writable buffer of at least \p tag_len Bytes.
- * \param tag_len   The length of the authentication field to generate in Bytes:
- *                  0, 4, 6, 8, 10, 12, 14 or 16.
- *
- * \warning         Passing \c 0 as \p tag_len means that the message is no
- *                  longer authenticated.
- *
- * \return          \c 0 on success.
- * \return          A CCM or cipher-specific error code on failure.
- */
-int mbedtls_ccm_star_encrypt_and_tag( mbedtls_ccm_context *ctx, size_t length,
-                         const unsigned char *iv, size_t iv_len,
-                         const unsigned char *add, size_t add_len,
-                         const unsigned char *input, unsigned char *output,
-                         unsigned char *tag, size_t tag_len );
-
-/**
- * \brief           This function performs a CCM authenticated decryption of a
- *                  buffer.
- *
- * \param ctx       The CCM context to use for decryption. This must be
- *                  initialized and bound to a key.
- * \param length    The length of the input data in Bytes.
- * \param iv        The initialization vector (nonce). This must be a readable
- *                  buffer of at least \p iv_len Bytes.
- * \param iv_len    The length of the nonce in Bytes: 7, 8, 9, 10, 11, 12,
- *                  or 13. The length L of the message length field is
- *                  15 - \p iv_len.
- * \param add       The additional data field. This must be a readable buffer
- *                  of at least that \p add_len Bytes..
- * \param add_len   The length of additional data in Bytes.
- *                  This must be less than 2^16 - 2^8.
- * \param input     The buffer holding the input data. If \p length is greater
- *                  than zero, \p input must be a readable buffer of at least
- *                  that length.
- * \param output    The buffer holding the output data. If \p length is greater
- *                  than zero, \p output must be a writable buffer of at least
- *                  that length.
- * \param tag       The buffer holding the authentication field. This must be a
- *                  readable buffer of at least \p tag_len Bytes.
- * \param tag_len   The length of the authentication field to generate in Bytes:
- *                  4, 6, 8, 10, 12, 14 or 16.
- *
- * \return          \c 0 on success. This indicates that the message is authentic.
- * \return          #MBEDTLS_ERR_CCM_AUTH_FAILED if the tag does not match.
- * \return          A cipher-specific error code on calculation failure.
- */
-int mbedtls_ccm_auth_decrypt( mbedtls_ccm_context *ctx, size_t length,
-                      const unsigned char *iv, size_t iv_len,
-                      const unsigned char *add, size_t add_len,
-                      const unsigned char *input, unsigned char *output,
-                      const unsigned char *tag, size_t tag_len );
-
-/**
- * \brief           This function performs a CCM* authenticated decryption of a
- *                  buffer.
- *
- * \note            When using this function in a variable tag length context,
- *                  the tag length has to be decoded from \p iv and passed to
- *                  this function as \p tag_len. (\p tag needs to be adjusted
- *                  accordingly.)
- *
- * \param ctx       The CCM context to use for decryption. This must be
- *                  initialized and bound to a key.
- * \param length    The length of the input data in Bytes.
- * \param iv        The initialization vector (nonce). This must be a readable
- *                  buffer of at least \p iv_len Bytes.
- * \param iv_len    The length of the nonce in Bytes: 7, 8, 9, 10, 11, 12,
- *                  or 13. The length L of the message length field is
- *                  15 - \p iv_len.
- * \param add       The additional data field. This must be a readable buffer of
- *                  at least that \p add_len Bytes.
- * \param add_len   The length of additional data in Bytes.
- *                  This must be less than 2^16 - 2^8.
- * \param input     The buffer holding the input data. If \p length is greater
- *                  than zero, \p input must be a readable buffer of at least
- *                  that length.
- * \param output    The buffer holding the output data. If \p length is greater
- *                  than zero, \p output must be a writable buffer of at least
- *                  that length.
- * \param tag       The buffer holding the authentication field. This must be a
- *                  readable buffer of at least \p tag_len Bytes.
- * \param tag_len   The length of the authentication field in Bytes.
- *                  0, 4, 6, 8, 10, 12, 14 or 16.
- *
- * \warning         Passing \c 0 as \p tag_len means that the message is nos
- *                  longer authenticated.
- *
- * \return          \c 0 on success.
- * \return          #MBEDTLS_ERR_CCM_AUTH_FAILED if the tag does not match.
- * \return          A cipher-specific error code on calculation failure.
- */
-int mbedtls_ccm_star_auth_decrypt( mbedtls_ccm_context *ctx, size_t length,
-                      const unsigned char *iv, size_t iv_len,
-                      const unsigned char *add, size_t add_len,
-                      const unsigned char *input, unsigned char *output,
-                      const unsigned char *tag, size_t tag_len );
-
-#if defined(MBEDTLS_SELF_TEST) && defined(MBEDTLS_AES_C)
-/**
- * \brief          The CCM checkup routine.
- *
- * \return         \c 0 on success.
- * \return         \c 1 on failure.
- */
-int mbedtls_ccm_self_test( int verbose );
-#endif /* MBEDTLS_SELF_TEST && MBEDTLS_AES_C */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* MBEDTLS_CCM_H */