.../bindings/display/panel/himax,hx8394.yaml | 76 +++ Makefile | 4 + arch/arm/Kconfig | 4 +- arch/arm64/Kconfig | 3 +- .../boot/dts/rockchip/rk3399-pinephone-pro.dts | 114 +++++ arch/s390/include/asm/ipl.h | 1 + arch/s390/kernel/ipl.c | 5 + arch/s390/kernel/setup.c | 4 + arch/x86/kernel/setup.c | 22 +- drivers/acpi/apei/hest.c | 8 + drivers/acpi/irq.c | 17 +- drivers/acpi/scan.c | 9 + drivers/ata/libahci.c | 18 + drivers/char/ipmi/ipmi_dmi.c | 15 + drivers/char/ipmi/ipmi_msghandler.c | 16 +- drivers/firmware/efi/Makefile | 1 + drivers/firmware/efi/efi.c | 124 +++-- drivers/firmware/efi/secureboot.c | 38 ++ drivers/firmware/sysfb.c | 18 +- drivers/gpu/drm/panel/Kconfig | 12 + drivers/gpu/drm/panel/Makefile | 1 + drivers/gpu/drm/panel/panel-himax-hx8394.c | 451 ++++++++++++++++++ drivers/hid/hid-rmi.c | 66 --- drivers/hwtracing/coresight/coresight-etm4x-core.c | 19 + drivers/input/rmi4/rmi_driver.c | 124 +++-- drivers/iommu/iommu.c | 22 + drivers/pci/quirks.c | 24 + drivers/usb/core/hub.c | 7 + drivers/usb/host/xhci-pci.c | 7 +- include/linux/efi.h | 22 +- include/linux/lsm_hook_defs.h | 2 + include/linux/lsm_hooks.h | 6 + include/linux/rh_kabi.h | 515 +++++++++++++++++++++ include/linux/rmi.h | 1 + include/linux/security.h | 5 + kernel/module/signing.c | 9 +- scripts/tags.sh | 2 + security/integrity/platform_certs/load_uefi.c | 6 +- security/lockdown/Kconfig | 13 + security/lockdown/lockdown.c | 1 + security/security.c | 6 + 41 files changed, 1637 insertions(+), 181 deletions(-) diff --git a/Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml b/Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml new file mode 100644 index 000000000000..1b2a1baa26f9 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/himax,hx8394.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Himax HX8394 MIPI-DSI LCD panel controller + +maintainers: + - Ondrej Jirman + - Javier Martinez Canillas + +description: + Device tree bindings for panels based on the Himax HX8394 controller, + such as the HannStar HSD060BHW4 720x1440 TFT LCD panel connected with + a MIPI-DSI video interface. + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + items: + - enum: + - hannstar,hsd060bhw4 + - const: himax,hx8394 + + reg: true + + reset-gpios: true + + backlight: true + + port: true + + vcc-supply: + description: Panel power supply + + iovcc-supply: + description: I/O voltage supply + +required: + - compatible + - reg + - reset-gpios + - backlight + - port + - vcc-supply + - iovcc-supply + +additionalProperties: false + +examples: + - | + #include + + dsi { + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + compatible = "hannstar,hsd060bhw4", "himax,hx8394"; + reg = <0>; + vcc-supply = <®_2v8_p>; + iovcc-supply = <®_1v8_p>; + reset-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>; + backlight = <&backlight>; + + port { + mipi_in_panel: endpoint { + remote-endpoint = <&mipi_out_panel>; + }; + }; + }; + }; + +... diff --git a/Makefile b/Makefile index 6ec0ec452e46..40a89b4c3682 100644 --- a/Makefile +++ b/Makefile @@ -22,6 +22,10 @@ $(if $(filter __%, $(MAKECMDGOALS)), \ PHONY := __all __all: +# Set RHEL variables +# Use this spot to avoid future merge conflicts +include Makefile.rhelver + # We are using a recursive build, so we need to do a little thinking # to get the ordering right. # diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 43c7773b89ae..2c1db1cb5528 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1299,9 +1299,9 @@ config HIGHMEM If unsure, say n. config HIGHPTE - bool "Allocate 2nd-level pagetables from highmem" if EXPERT + bool "Allocate 2nd-level pagetables from highmem" depends on HIGHMEM - default y + default n help The VM uses one page of physical memory for each page table. For systems with a lot of processes, this can use a lot of diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index ddfd35c86bda..2b69e42dff58 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -1233,7 +1233,7 @@ endchoice config ARM64_FORCE_52BIT bool "Force 52-bit virtual addresses for userspace" - depends on ARM64_VA_BITS_52 && EXPERT + depends on ARM64_VA_BITS_52 help For systems with 52-bit userspace VAs enabled, the kernel will attempt to maintain compatibility with older software by providing 48-bit VAs @@ -1472,6 +1472,7 @@ config XEN config ARCH_FORCE_MAX_ORDER int default "14" if ARM64_64K_PAGES + default "13" if (ARCH_THUNDER && !ARM64_64K_PAGES) default "12" if ARM64_16K_PAGES default "11" help diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts b/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts index a0795a2b1cb1..475ba78acc09 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts @@ -29,6 +29,11 @@ chosen { stdout-path = "serial2:115200n8"; }; + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm0 0 50000 0>; + }; + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; @@ -102,6 +107,30 @@ wifi_pwrseq: sdio-wifi-pwrseq { /* WL_REG_ON on module */ reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; }; + + /* MIPI DSI panel 1.8v supply */ + vcc1v8_lcd: vcc1v8-lcd { + compatible = "regulator-fixed"; + enable-active-high; + regulator-name = "vcc1v8_lcd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc3v3_sys>; + gpio = <&gpio3 RK_PA5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + }; + + /* MIPI DSI panel 2.8v supply */ + vcc2v8_lcd: vcc2v8-lcd { + compatible = "regulator-fixed"; + enable-active-high; + regulator-name = "vcc2v8_lcd"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + vin-supply = <&vcc3v3_sys>; + gpio = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + }; }; &cpu_alert0 { @@ -139,6 +168,11 @@ &emmc_phy { status = "okay"; }; +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + &i2c0 { clock-frequency = <400000>; i2c-scl-rising-time-ns = <168>; @@ -333,6 +367,25 @@ regulator-state-mem { }; }; +&i2c3 { + i2c-scl-rising-time-ns = <450>; + i2c-scl-falling-time-ns = <15>; + status = "okay"; + + touchscreen@14 { + compatible = "goodix,gt1158"; + reg = <0x14>; + interrupt-parent = <&gpio3>; + interrupts = ; + irq-gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_HIGH>; + AVDD28-supply = <&vcc3v0_touch>; + VDDIO-supply = <&vcc3v0_touch>; + touchscreen-size-x = <720>; + touchscreen-size-y = <1440>; + }; +}; + &cluster0_opp { opp04 { status = "disabled"; @@ -362,6 +415,39 @@ &io_domains { status = "okay"; }; +&mipi_dsi { + status = "okay"; + clock-master; + + ports { + mipi_out: port@1 { + #address-cells = <0>; + #size-cells = <0>; + reg = <1>; + + mipi_out_panel: endpoint { + remote-endpoint = <&mipi_in_panel>; + }; + }; + }; + + panel@0 { + compatible = "hannstar,hsd060bhw4"; + reg = <0>; + backlight = <&backlight>; + reset-gpios = <&gpio4 RK_PD1 GPIO_ACTIVE_LOW>; + vcc-supply = <&vcc2v8_lcd>; + iovcc-supply = <&vcc1v8_lcd>; + pinctrl-names = "default"; + + port { + mipi_in_panel: endpoint { + remote-endpoint = <&mipi_out_panel>; + }; + }; + }; +}; + &pmu_io_domains { pmu1830-supply = <&vcc_1v8>; status = "okay"; @@ -429,6 +515,10 @@ &sdio0 { status = "okay"; }; +&pwm0 { + status = "okay"; +}; + &sdmmc { bus-width = <4>; cap-sd-highspeed; @@ -479,3 +569,27 @@ bluetooth { &uart2 { status = "okay"; }; + +&vopb { + status = "okay"; + assigned-clocks = <&cru DCLK_VOP0_DIV>, <&cru DCLK_VOP0>, + <&cru ACLK_VOP0>, <&cru HCLK_VOP0>; + assigned-clock-rates = <0>, <0>, <400000000>, <100000000>; + assigned-clock-parents = <&cru PLL_GPLL>, <&cru DCLK_VOP0_DIV>; +}; + +&vopb_mmu { + status = "okay"; +}; + +&vopl { + status = "okay"; + assigned-clocks = <&cru DCLK_VOP1_DIV>, <&cru DCLK_VOP1>, + <&cru ACLK_VOP1>, <&cru HCLK_VOP1>; + assigned-clock-rates = <0>, <0>, <400000000>, <100000000>; + assigned-clock-parents = <&cru PLL_GPLL>, <&cru DCLK_VOP1_DIV>; +}; + +&vopl_mmu { + status = "okay"; +}; diff --git a/arch/s390/include/asm/ipl.h b/arch/s390/include/asm/ipl.h index b0d00032479d..afb9544fb007 100644 --- a/arch/s390/include/asm/ipl.h +++ b/arch/s390/include/asm/ipl.h @@ -139,6 +139,7 @@ int ipl_report_add_component(struct ipl_report *report, struct kexec_buf *kbuf, unsigned char flags, unsigned short cert); int ipl_report_add_certificate(struct ipl_report *report, void *key, unsigned long addr, unsigned long len); +bool ipl_get_secureboot(void); /* * DIAG 308 support diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c index bcf03939e6fe..3773e027b034 100644 --- a/arch/s390/kernel/ipl.c +++ b/arch/s390/kernel/ipl.c @@ -2520,3 +2520,8 @@ int ipl_report_free(struct ipl_report *report) } #endif + +bool ipl_get_secureboot(void) +{ + return !!ipl_secure_flag; +} diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c index 696c9e007a36..80a56c8eaaae 100644 --- a/arch/s390/kernel/setup.c +++ b/arch/s390/kernel/setup.c @@ -49,6 +49,7 @@ #include #include #include +#include #include #include @@ -981,6 +982,9 @@ void __init setup_arch(char **cmdline_p) log_component_list(); + if (ipl_get_secureboot()) + security_lock_kernel_down("Secure IPL mode", LOCKDOWN_INTEGRITY_MAX); + /* Have one command line that is parsed and saved in /proc/cmdline */ /* boot_command_line has been already set up in early.c */ *cmdline_p = boot_command_line; diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index 88188549647c..d4147393237b 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include #include @@ -1038,6 +1039,13 @@ void __init setup_arch(char **cmdline_p) if (efi_enabled(EFI_BOOT)) efi_init(); + efi_set_secure_boot(boot_params.secure_boot); + +#ifdef CONFIG_LOCK_DOWN_IN_EFI_SECURE_BOOT + if (efi_enabled(EFI_SECURE_BOOT)) + security_lock_kernel_down("EFI Secure Boot mode", LOCKDOWN_INTEGRITY_MAX); +#endif + dmi_setup(); /* @@ -1196,19 +1204,7 @@ void __init setup_arch(char **cmdline_p) /* Allocate bigger log buffer */ setup_log_buf(1); - if (efi_enabled(EFI_BOOT)) { - switch (boot_params.secure_boot) { - case efi_secureboot_mode_disabled: - pr_info("Secure boot disabled\n"); - break; - case efi_secureboot_mode_enabled: - pr_info("Secure boot enabled\n"); - break; - default: - pr_info("Secure boot could not be determined\n"); - break; - } - } + efi_set_secure_boot(boot_params.secure_boot); reserve_initrd(); diff --git a/drivers/acpi/apei/hest.c b/drivers/acpi/apei/hest.c index 6aef1ee5e1bd..8f146b1b4972 100644 --- a/drivers/acpi/apei/hest.c +++ b/drivers/acpi/apei/hest.c @@ -96,6 +96,14 @@ static int apei_hest_parse(apei_hest_func_t func, void *data) if (hest_disable || !hest_tab) return -EINVAL; +#ifdef CONFIG_ARM64 + /* Ignore broken firmware */ + if (!strncmp(hest_tab->header.oem_id, "HPE ", 6) && + !strncmp(hest_tab->header.oem_table_id, "ProLiant", 8) && + MIDR_IMPLEMENTOR(read_cpuid_id()) == ARM_CPU_IMP_APM) + return -EINVAL; +#endif + hest_hdr = (struct acpi_hest_header *)(hest_tab + 1); for (i = 0; i < hest_tab->error_source_count; i++) { len = hest_esrc_len(hest_hdr); diff --git a/drivers/acpi/irq.c b/drivers/acpi/irq.c index c2c786eb95ab..4e3aa80cd5cf 100644 --- a/drivers/acpi/irq.c +++ b/drivers/acpi/irq.c @@ -138,6 +138,7 @@ struct acpi_irq_parse_one_ctx { unsigned int index; unsigned long *res_flags; struct irq_fwspec *fwspec; + bool skip_producer_check; }; /** @@ -211,7 +212,8 @@ static acpi_status acpi_irq_parse_one_cb(struct acpi_resource *ares, return AE_CTRL_TERMINATE; case ACPI_RESOURCE_TYPE_EXTENDED_IRQ: eirq = &ares->data.extended_irq; - if (eirq->producer_consumer == ACPI_PRODUCER) + if (!ctx->skip_producer_check && + eirq->producer_consumer == ACPI_PRODUCER) return AE_OK; if (ctx->index >= eirq->interrupt_count) { ctx->index -= eirq->interrupt_count; @@ -247,8 +249,19 @@ static acpi_status acpi_irq_parse_one_cb(struct acpi_resource *ares, static int acpi_irq_parse_one(acpi_handle handle, unsigned int index, struct irq_fwspec *fwspec, unsigned long *flags) { - struct acpi_irq_parse_one_ctx ctx = { -EINVAL, index, flags, fwspec }; + struct acpi_irq_parse_one_ctx ctx = { -EINVAL, index, flags, fwspec, false }; + /* + * Firmware on arm64-based HPE m400 platform incorrectly marks + * its UART interrupt as ACPI_PRODUCER rather than ACPI_CONSUMER. + * Don't do the producer/consumer check for that device. + */ + if (IS_ENABLED(CONFIG_ARM64)) { + struct acpi_device *adev = acpi_get_acpi_dev(handle); + + if (adev && !strcmp(acpi_device_hid(adev), "APMC0D08")) + ctx.skip_producer_check = true; + } acpi_walk_resources(handle, METHOD_NAME__CRS, acpi_irq_parse_one_cb, &ctx); return ctx.rc; } diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index 0c6f06abe3f4..f66b85b2c108 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -1746,6 +1746,15 @@ static bool acpi_device_enumeration_by_parent(struct acpi_device *device) if (!acpi_match_device_ids(device, ignore_serial_bus_ids)) return false; + /* + * Firmware on some arm64 X-Gene platforms will make the UART + * device appear as both a UART and a slave of that UART. Just + * bail out here for X-Gene UARTs. + */ + if (IS_ENABLED(CONFIG_ARM64) && + !strcmp(acpi_device_hid(device), "APMC0D08")) + return false; + INIT_LIST_HEAD(&resource_list); acpi_dev_get_resources(device, &resource_list, acpi_check_serial_bus_slave, diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c index 29acc35bf4a6..c0eaa763cdad 100644 --- a/drivers/ata/libahci.c +++ b/drivers/ata/libahci.c @@ -727,6 +727,24 @@ int ahci_stop_engine(struct ata_port *ap) tmp &= ~PORT_CMD_START; writel(tmp, port_mmio + PORT_CMD); +#ifdef CONFIG_ARM64 + /* Rev Ax of Cavium CN99XX needs a hack for port stop */ + if (dev_is_pci(ap->host->dev) && + to_pci_dev(ap->host->dev)->vendor == 0x14e4 && + to_pci_dev(ap->host->dev)->device == 0x9027 && + midr_is_cpu_model_range(read_cpuid_id(), + MIDR_CPU_MODEL(ARM_CPU_IMP_BRCM, BRCM_CPU_PART_VULCAN), + MIDR_CPU_VAR_REV(0, 0), + MIDR_CPU_VAR_REV(0, MIDR_REVISION_MASK))) { + tmp = readl(hpriv->mmio + 0x8000); + udelay(100); + writel(tmp | (1 << 26), hpriv->mmio + 0x8000); + udelay(100); + writel(tmp & ~(1 << 26), hpriv->mmio + 0x8000); + dev_warn(ap->host->dev, "CN99XX SATA reset workaround applied\n"); + } +#endif + /* wait for engine to stop. This could be as long as 500 msec */ tmp = ata_wait_register(ap, port_mmio + PORT_CMD, PORT_CMD_LIST_ON, PORT_CMD_LIST_ON, 1, 500); diff --git a/drivers/char/ipmi/ipmi_dmi.c b/drivers/char/ipmi/ipmi_dmi.c index bbf7029e224b..cf7faa970dd6 100644 --- a/drivers/char/ipmi/ipmi_dmi.c +++ b/drivers/char/ipmi/ipmi_dmi.c @@ -215,6 +215,21 @@ static int __init scan_for_dmi_ipmi(void) { const struct dmi_device *dev = NULL; +#ifdef CONFIG_ARM64 + /* RHEL-only + * If this is ARM-based HPE m400, return now, because that platform + * reports the host-side ipmi address as intel port-io space, which + * does not exist in the ARM architecture. + */ + const char *dmistr = dmi_get_system_info(DMI_PRODUCT_NAME); + + if (dmistr && (strcmp("ProLiant m400 Server", dmistr) == 0)) { + pr_debug("%s does not support host ipmi\n", dmistr); + return 0; + } + /* END RHEL-only */ +#endif + while ((dev = dmi_find_device(DMI_DEV_TYPE_IPMI, NULL, dev))) dmi_decode_ipmi((const struct dmi_header *) dev->device_data); diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c index 186f1fee7534..93e3a76596ff 100644 --- a/drivers/char/ipmi/ipmi_msghandler.c +++ b/drivers/char/ipmi/ipmi_msghandler.c @@ -35,6 +35,7 @@ #include #include #include +#include #include #define IPMI_DRIVER_VERSION "39.2" @@ -5516,8 +5517,21 @@ static int __init ipmi_init_msghandler_mod(void) { int rv; - pr_info("version " IPMI_DRIVER_VERSION "\n"); +#ifdef CONFIG_ARM64 + /* RHEL-only + * If this is ARM-based HPE m400, return now, because that platform + * reports the host-side ipmi address as intel port-io space, which + * does not exist in the ARM architecture. + */ + const char *dmistr = dmi_get_system_info(DMI_PRODUCT_NAME); + if (dmistr && (strcmp("ProLiant m400 Server", dmistr) == 0)) { + pr_debug("%s does not support host ipmi\n", dmistr); + return -ENOSYS; + } + /* END RHEL-only */ +#endif + pr_info("version " IPMI_DRIVER_VERSION "\n"); mutex_lock(&ipmi_interfaces_mutex); rv = ipmi_register_driver(); mutex_unlock(&ipmi_interfaces_mutex); diff --git a/drivers/firmware/efi/Makefile b/drivers/firmware/efi/Makefile index b51f2a4c821e..be31d32aba53 100644 --- a/drivers/firmware/efi/Makefile +++ b/drivers/firmware/efi/Makefile @@ -25,6 +25,7 @@ subdir-$(CONFIG_EFI_STUB) += libstub obj-$(CONFIG_EFI_BOOTLOADER_CONTROL) += efibc.o obj-$(CONFIG_EFI_TEST) += test/ obj-$(CONFIG_EFI_DEV_PATH_PARSER) += dev-path-parser.o +obj-$(CONFIG_EFI) += secureboot.o obj-$(CONFIG_APPLE_PROPERTIES) += apple-properties.o obj-$(CONFIG_EFI_RCI2_TABLE) += rci2-table.o obj-$(CONFIG_EFI_EMBEDDED_FIRMWARE) += embedded-firmware.o diff --git a/drivers/firmware/efi/efi.c b/drivers/firmware/efi/efi.c index 1e0b016fdc2b..7417f131db15 100644 --- a/drivers/firmware/efi/efi.c +++ b/drivers/firmware/efi/efi.c @@ -32,6 +32,7 @@ #include #include #include +#include #include @@ -907,40 +908,101 @@ int efi_mem_type(unsigned long phys_addr) } #endif +struct efi_error_code { + efi_status_t status; + int errno; + const char *description; +}; + +static const struct efi_error_code efi_error_codes[] = { + { EFI_SUCCESS, 0, "Success"}, +#if 0 + { EFI_LOAD_ERROR, -EPICK_AN_ERRNO, "Load Error"}, +#endif + { EFI_INVALID_PARAMETER, -EINVAL, "Invalid Parameter"}, + { EFI_UNSUPPORTED, -ENOSYS, "Unsupported"}, + { EFI_BAD_BUFFER_SIZE, -ENOSPC, "Bad Buffer Size"}, + { EFI_BUFFER_TOO_SMALL, -ENOSPC, "Buffer Too Small"}, + { EFI_NOT_READY, -EAGAIN, "Not Ready"}, + { EFI_DEVICE_ERROR, -EIO, "Device Error"}, + { EFI_WRITE_PROTECTED, -EROFS, "Write Protected"}, + { EFI_OUT_OF_RESOURCES, -ENOMEM, "Out of Resources"}, +#if 0 + { EFI_VOLUME_CORRUPTED, -EPICK_AN_ERRNO, "Volume Corrupt"}, + { EFI_VOLUME_FULL, -EPICK_AN_ERRNO, "Volume Full"}, + { EFI_NO_MEDIA, -EPICK_AN_ERRNO, "No Media"}, + { EFI_MEDIA_CHANGED, -EPICK_AN_ERRNO, "Media changed"}, +#endif + { EFI_NOT_FOUND, -ENOENT, "Not Found"}, +#if 0 + { EFI_ACCESS_DENIED, -EPICK_AN_ERRNO, "Access Denied"}, + { EFI_NO_RESPONSE, -EPICK_AN_ERRNO, "No Response"}, + { EFI_NO_MAPPING, -EPICK_AN_ERRNO, "No mapping"}, + { EFI_TIMEOUT, -EPICK_AN_ERRNO, "Time out"}, + { EFI_NOT_STARTED, -EPICK_AN_ERRNO, "Not started"}, + { EFI_ALREADY_STARTED, -EPICK_AN_ERRNO, "Already started"}, +#endif + { EFI_ABORTED, -EINTR, "Aborted"}, +#if 0 + { EFI_ICMP_ERROR, -EPICK_AN_ERRNO, "ICMP Error"}, + { EFI_TFTP_ERROR, -EPICK_AN_ERRNO, "TFTP Error"}, + { EFI_PROTOCOL_ERROR, -EPICK_AN_ERRNO, "Protocol Error"}, + { EFI_INCOMPATIBLE_VERSION, -EPICK_AN_ERRNO, "Incompatible Version"}, +#endif + { EFI_SECURITY_VIOLATION, -EACCES, "Security Policy Violation"}, +#if 0 + { EFI_CRC_ERROR, -EPICK_AN_ERRNO, "CRC Error"}, + { EFI_END_OF_MEDIA, -EPICK_AN_ERRNO, "End of Media"}, + { EFI_END_OF_FILE, -EPICK_AN_ERRNO, "End of File"}, + { EFI_INVALID_LANGUAGE, -EPICK_AN_ERRNO, "Invalid Languages"}, + { EFI_COMPROMISED_DATA, -EPICK_AN_ERRNO, "Compromised Data"}, + + // warnings + { EFI_WARN_UNKOWN_GLYPH, -EPICK_AN_ERRNO, "Warning Unknown Glyph"}, + { EFI_WARN_DELETE_FAILURE, -EPICK_AN_ERRNO, "Warning Delete Failure"}, + { EFI_WARN_WRITE_FAILURE, -EPICK_AN_ERRNO, "Warning Write Failure"}, + { EFI_WARN_BUFFER_TOO_SMALL, -EPICK_AN_ERRNO, "Warning Buffer Too Small"}, +#endif +}; + +static int +efi_status_cmp_bsearch(const void *key, const void *item) +{ + u64 status = (u64)(uintptr_t)key; + struct efi_error_code *code = (struct efi_error_code *)item; + + if (status < code->status) + return -1; + if (status > code->status) + return 1; + return 0; +} + int efi_status_to_err(efi_status_t status) { - int err; - - switch (status) { - case EFI_SUCCESS: - err = 0; - break; - case EFI_INVALID_PARAMETER: - err = -EINVAL; - break; - case EFI_OUT_OF_RESOURCES: - err = -ENOSPC; - break; - case EFI_DEVICE_ERROR: - err = -EIO; - break; - case EFI_WRITE_PROTECTED: - err = -EROFS; - break; - case EFI_SECURITY_VIOLATION: - err = -EACCES; - break; - case EFI_NOT_FOUND: - err = -ENOENT; - break; - case EFI_ABORTED: - err = -EINTR; - break; - default: - err = -EINVAL; - } + struct efi_error_code *found; + size_t num = sizeof(efi_error_codes) / sizeof(struct efi_error_code); - return err; + found = bsearch((void *)(uintptr_t)status, efi_error_codes, + sizeof(struct efi_error_code), num, + efi_status_cmp_bsearch); + if (!found) + return -EINVAL; + return found->errno; +} + +const char * +efi_status_to_str(efi_status_t status) +{ + struct efi_error_code *found; + size_t num = sizeof(efi_error_codes) / sizeof(struct efi_error_code); + + found = bsearch((void *)(uintptr_t)status, efi_error_codes, + sizeof(struct efi_error_code), num, + efi_status_cmp_bsearch); + if (!found) + return "Unknown error code"; + return found->description; } EXPORT_SYMBOL_GPL(efi_status_to_err); diff --git a/drivers/firmware/efi/secureboot.c b/drivers/firmware/efi/secureboot.c new file mode 100644 index 000000000000..de0a3714a5d4 --- /dev/null +++ b/drivers/firmware/efi/secureboot.c @@ -0,0 +1,38 @@ +/* Core kernel secure boot support. + * + * Copyright (C) 2017 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include + +/* + * Decide what to do when UEFI secure boot mode is enabled. + */ +void __init efi_set_secure_boot(enum efi_secureboot_mode mode) +{ + if (efi_enabled(EFI_BOOT)) { + switch (mode) { + case efi_secureboot_mode_disabled: + pr_info("Secure boot disabled\n"); + break; + case efi_secureboot_mode_enabled: + set_bit(EFI_SECURE_BOOT, &efi.flags); + pr_info("Secure boot enabled\n"); + break; + default: + pr_warn("Secure boot could not be determined (mode %u)\n", + mode); + break; + } + } +} diff --git a/drivers/firmware/sysfb.c b/drivers/firmware/sysfb.c index 3c197db42c9d..16e4a2e90fae 100644 --- a/drivers/firmware/sysfb.c +++ b/drivers/firmware/sysfb.c @@ -34,6 +34,22 @@ #include #include +static int skip_simpledrm; + +static int __init simpledrm_disable(char *opt) +{ + if (!opt) + return -EINVAL; + + get_option(&opt, &skip_simpledrm); + + if (skip_simpledrm) + pr_info("The simpledrm driver will not be probed\n"); + + return 0; +} +early_param("nvidia-drm.modeset", simpledrm_disable); + static struct platform_device *pd; static DEFINE_MUTEX(disable_lock); static bool disabled; @@ -85,7 +101,7 @@ static __init int sysfb_init(void) /* try to create a simple-framebuffer device */ compatible = sysfb_parse_mode(si, &mode); - if (compatible) { + if (compatible && !skip_simpledrm) { pd = sysfb_create_simplefb(si, &mode); if (!IS_ERR(pd)) goto unlock_mutex; diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig index 737edcdf9eef..7ee9c83f09a7 100644 --- a/drivers/gpu/drm/panel/Kconfig +++ b/drivers/gpu/drm/panel/Kconfig @@ -154,6 +154,18 @@ config DRM_PANEL_FEIYANG_FY07024DI26A30D Say Y if you want to enable support for panels based on the Feiyang FY07024DI26A30-D MIPI-DSI interface. +config DRM_PANEL_HIMAX_HX8394 + tristate "HIMAX HX8394 MIPI-DSI LCD panels" + depends on OF + depends on DRM_MIPI_DSI + depends on BACKLIGHT_CLASS_DEVICE + help + Say Y if you want to enable support for panels based on the + Himax HX8394 controller, such as the HannStar HSD060BHW4 + 720x1440 TFT LCD panel that uses a MIPI-DSI interface. + + If M is selected the module will be called panel-himax-hx8394. + config DRM_PANEL_ILITEK_IL9322 tristate "Ilitek ILI9322 320x240 QVGA panels" depends on OF && SPI diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile index f8f9d9f6a307..84c01adafd4c 100644 --- a/drivers/gpu/drm/panel/Makefile +++ b/drivers/gpu/drm/panel/Makefile @@ -13,6 +13,7 @@ obj-$(CONFIG_DRM_PANEL_EBBG_FT8719) += panel-ebbg-ft8719.o obj-$(CONFIG_DRM_PANEL_ELIDA_KD35T133) += panel-elida-kd35t133.o obj-$(CONFIG_DRM_PANEL_FEIXIN_K101_IM2BA02) += panel-feixin-k101-im2ba02.o obj-$(CONFIG_DRM_PANEL_FEIYANG_FY07024DI26A30D) += panel-feiyang-fy07024di26a30d.o +obj-$(CONFIG_DRM_PANEL_HIMAX_HX8394) += panel-himax-hx8394.o obj-$(CONFIG_DRM_PANEL_ILITEK_IL9322) += panel-ilitek-ili9322.o obj-$(CONFIG_DRM_PANEL_ILITEK_ILI9341) += panel-ilitek-ili9341.o obj-$(CONFIG_DRM_PANEL_ILITEK_ILI9881C) += panel-ilitek-ili9881c.o diff --git a/drivers/gpu/drm/panel/panel-himax-hx8394.c b/drivers/gpu/drm/panel/panel-himax-hx8394.c new file mode 100644 index 000000000000..d4fb5d1b295b --- /dev/null +++ b/drivers/gpu/drm/panel/panel-himax-hx8394.c @@ -0,0 +1,451 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Driver for panels based on Himax HX8394 controller, such as: + * + * - HannStar HSD060BHW4 5.99" MIPI-DSI panel + * + * Copyright (C) 2021 Kamil Trzciński + * + * Based on drivers/gpu/drm/panel/panel-sitronix-st7703.c + * Copyright (C) Purism SPC 2019 + */ + +#include +#include +#include +#include +#include +#include +#include + +#include