From 8136a73d16f53a779e97c368ab80d26885205d4b Mon Sep 17 00:00:00 2001 From: Tsuchiya Yuto Date: Sun, 18 Oct 2020 16:42:44 +0900 Subject: [PATCH] (surface3-oemb) add DMI matches for Surface 3 with broken DMI table On some Surface 3, the DMI table gets corrupted for unknown reasons and breaks existing DMI matching used for device-specific quirks. This commit adds the (broken) DMI data into dmi_system_id tables used for quirks so that each driver can enable quirks even on the affected systems. On affected systems, DMI data will look like this: $ grep . /sys/devices/virtual/dmi/id/{bios_vendor,board_name,board_vendor,\ chassis_vendor,product_name,sys_vendor} /sys/devices/virtual/dmi/id/bios_vendor:American Megatrends Inc. /sys/devices/virtual/dmi/id/board_name:OEMB /sys/devices/virtual/dmi/id/board_vendor:OEMB /sys/devices/virtual/dmi/id/chassis_vendor:OEMB /sys/devices/virtual/dmi/id/product_name:OEMB /sys/devices/virtual/dmi/id/sys_vendor:OEMB Expected: $ grep . /sys/devices/virtual/dmi/id/{bios_vendor,board_name,board_vendor,\ chassis_vendor,product_name,sys_vendor} /sys/devices/virtual/dmi/id/bios_vendor:American Megatrends Inc. /sys/devices/virtual/dmi/id/board_name:Surface 3 /sys/devices/virtual/dmi/id/board_vendor:Microsoft Corporation /sys/devices/virtual/dmi/id/chassis_vendor:Microsoft Corporation /sys/devices/virtual/dmi/id/product_name:Surface 3 /sys/devices/virtual/dmi/id/sys_vendor:Microsoft Corporation Signed-off-by: Tsuchiya Yuto Patchset: surface3-oemb --- drivers/platform/surface/surface3-wmi.c | 7 +++++++ sound/soc/codecs/rt5645.c | 9 +++++++++ sound/soc/intel/common/soc-acpi-intel-cht-match.c | 8 ++++++++ 3 files changed, 24 insertions(+) diff --git a/drivers/platform/surface/surface3-wmi.c b/drivers/platform/surface/surface3-wmi.c index ca4602bcc7de..490b9731068a 100644 --- a/drivers/platform/surface/surface3-wmi.c +++ b/drivers/platform/surface/surface3-wmi.c @@ -37,6 +37,13 @@ static const struct dmi_system_id surface3_dmi_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "Surface 3"), }, }, + { + .matches = { + DMI_MATCH(DMI_BIOS_VENDOR, "American Megatrends Inc."), + DMI_MATCH(DMI_SYS_VENDOR, "OEMB"), + DMI_MATCH(DMI_PRODUCT_NAME, "OEMB"), + }, + }, #endif { } }; diff --git a/sound/soc/codecs/rt5645.c b/sound/soc/codecs/rt5645.c index 507aba8de3cc..1f8570e04083 100644 --- a/sound/soc/codecs/rt5645.c +++ b/sound/soc/codecs/rt5645.c @@ -3718,6 +3718,15 @@ static const struct dmi_system_id dmi_platform_data[] = { }, .driver_data = (void *)&intel_braswell_platform_data, }, + { + .ident = "Microsoft Surface 3", + .matches = { + DMI_MATCH(DMI_BIOS_VENDOR, "American Megatrends Inc."), + DMI_MATCH(DMI_SYS_VENDOR, "OEMB"), + DMI_MATCH(DMI_PRODUCT_NAME, "OEMB"), + }, + .driver_data = (void *)&intel_braswell_platform_data, + }, { /* * Match for the GPDwin which unfortunately uses somewhat diff --git a/sound/soc/intel/common/soc-acpi-intel-cht-match.c b/sound/soc/intel/common/soc-acpi-intel-cht-match.c index 6beb00858c33..d82d77387a0a 100644 --- a/sound/soc/intel/common/soc-acpi-intel-cht-match.c +++ b/sound/soc/intel/common/soc-acpi-intel-cht-match.c @@ -27,6 +27,14 @@ static const struct dmi_system_id cht_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "Surface 3"), }, }, + { + .callback = cht_surface_quirk_cb, + .matches = { + DMI_MATCH(DMI_BIOS_VENDOR, "American Megatrends Inc."), + DMI_MATCH(DMI_SYS_VENDOR, "OEMB"), + DMI_MATCH(DMI_PRODUCT_NAME, "OEMB"), + }, + }, { } }; -- 2.37.2 From 6089531f7c51fe0cea3bd6a8f0771e6e53ed4068 Mon Sep 17 00:00:00 2001 From: Tsuchiya Yuto Date: Tue, 29 Sep 2020 17:32:22 +0900 Subject: [PATCH] mwifiex: pcie: add reset_wsid quirk for Surface 3 This commit adds reset_wsid quirk and uses this quirk for Surface 3 on card reset. To reset mwifiex on Surface 3, it seems that calling the _DSM method exists in \_SB.WSID [1] device is required. On Surface 3, calling the _DSM method removes/re-probes the card by itself. So, need to place the reset function before performing FLR and skip performing any other reset-related works. Note that Surface Pro 3 also has the WSID device [2], but it seems to need more work. This commit only supports Surface 3 yet. [1] https://github.com/linux-surface/acpidumps/blob/05cba925f3a515f222acb5b3551a032ddde958fe/surface_3/dsdt.dsl#L11947-L12011 [2] https://github.com/linux-surface/acpidumps/blob/05cba925f3a515f222acb5b3551a032ddde958fe/surface_pro_3/dsdt.dsl#L12164-L12216 Signed-off-by: Tsuchiya Yuto Patchset: mwifiex --- drivers/net/wireless/marvell/mwifiex/pcie.c | 10 +++ .../wireless/marvell/mwifiex/pcie_quirks.c | 83 +++++++++++++++++++ .../wireless/marvell/mwifiex/pcie_quirks.h | 6 ++ 3 files changed, 99 insertions(+) diff --git a/drivers/net/wireless/marvell/mwifiex/pcie.c b/drivers/net/wireless/marvell/mwifiex/pcie.c index d5fb29400bad..033648526f16 100644 --- a/drivers/net/wireless/marvell/mwifiex/pcie.c +++ b/drivers/net/wireless/marvell/mwifiex/pcie.c @@ -2993,6 +2993,16 @@ static void mwifiex_pcie_card_reset_work(struct mwifiex_adapter *adapter) { struct pcie_service_card *card = adapter->card; + /* On Surface 3, reset_wsid method removes then re-probes card by + * itself. So, need to place it here and skip performing any other + * reset-related works. + */ + if (card->quirks & QUIRK_FW_RST_WSID_S3) { + mwifiex_pcie_reset_wsid_quirk(card->dev); + /* skip performing any other reset-related works */ + return; + } + /* We can't afford to wait here; remove() might be waiting on us. If we * can't grab the device lock, maybe we'll get another chance later. */ diff --git a/drivers/net/wireless/marvell/mwifiex/pcie_quirks.c b/drivers/net/wireless/marvell/mwifiex/pcie_quirks.c index 0234cf3c2974..563dd0d5ac79 100644 --- a/drivers/net/wireless/marvell/mwifiex/pcie_quirks.c +++ b/drivers/net/wireless/marvell/mwifiex/pcie_quirks.c @@ -15,10 +15,21 @@ * this warranty disclaimer. */ +#include #include #include "pcie_quirks.h" +/* For reset_wsid quirk */ +#define ACPI_WSID_PATH "\\_SB.WSID" +#define WSID_REV 0x0 +#define WSID_FUNC_WIFI_PWR_OFF 0x1 +#define WSID_FUNC_WIFI_PWR_ON 0x2 +/* WSID _DSM UUID: "534ea3bf-fcc2-4e7a-908f-a13978f0c7ef" */ +static const guid_t wsid_dsm_guid = + GUID_INIT(0x534ea3bf, 0xfcc2, 0x4e7a, + 0x90, 0x8f, 0xa1, 0x39, 0x78, 0xf0, 0xc7, 0xef); + /* quirk table based on DMI matching */ static const struct dmi_system_id mwifiex_quirk_table[] = { { @@ -87,6 +98,14 @@ static const struct dmi_system_id mwifiex_quirk_table[] = { }, .driver_data = (void *)QUIRK_FW_RST_D3COLD, }, + { + .ident = "Surface 3", + .matches = { + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface 3"), + }, + .driver_data = (void *)QUIRK_FW_RST_WSID_S3, + }, {} }; @@ -103,6 +122,9 @@ void mwifiex_initialize_quirks(struct pcie_service_card *card) dev_info(&pdev->dev, "no quirks enabled\n"); if (card->quirks & QUIRK_FW_RST_D3COLD) dev_info(&pdev->dev, "quirk reset_d3cold enabled\n"); + if (card->quirks & QUIRK_FW_RST_WSID_S3) + dev_info(&pdev->dev, + "quirk reset_wsid for Surface 3 enabled\n"); } static void mwifiex_pcie_set_power_d3cold(struct pci_dev *pdev) @@ -159,3 +181,64 @@ int mwifiex_pcie_reset_d3cold_quirk(struct pci_dev *pdev) return 0; } + +int mwifiex_pcie_reset_wsid_quirk(struct pci_dev *pdev) +{ + acpi_handle handle; + union acpi_object *obj; + acpi_status status; + + dev_info(&pdev->dev, "Using reset_wsid quirk to perform FW reset\n"); + + status = acpi_get_handle(NULL, ACPI_WSID_PATH, &handle); + if (ACPI_FAILURE(status)) { + dev_err(&pdev->dev, "No ACPI handle for path %s\n", + ACPI_WSID_PATH); + return -ENODEV; + } + + if (!acpi_has_method(handle, "_DSM")) { + dev_err(&pdev->dev, "_DSM method not found\n"); + return -ENODEV; + } + + if (!acpi_check_dsm(handle, &wsid_dsm_guid, + WSID_REV, WSID_FUNC_WIFI_PWR_OFF)) { + dev_err(&pdev->dev, + "_DSM method doesn't support wifi power off func\n"); + return -ENODEV; + } + + if (!acpi_check_dsm(handle, &wsid_dsm_guid, + WSID_REV, WSID_FUNC_WIFI_PWR_ON)) { + dev_err(&pdev->dev, + "_DSM method doesn't support wifi power on func\n"); + return -ENODEV; + } + + /* card will be removed immediately after this call on Surface 3 */ + dev_info(&pdev->dev, "turning wifi off...\n"); + obj = acpi_evaluate_dsm(handle, &wsid_dsm_guid, + WSID_REV, WSID_FUNC_WIFI_PWR_OFF, + NULL); + if (!obj) { + dev_err(&pdev->dev, + "device _DSM execution failed for turning wifi off\n"); + return -EIO; + } + ACPI_FREE(obj); + + /* card will be re-probed immediately after this call on Surface 3 */ + dev_info(&pdev->dev, "turning wifi on...\n"); + obj = acpi_evaluate_dsm(handle, &wsid_dsm_guid, + WSID_REV, WSID_FUNC_WIFI_PWR_ON, + NULL); + if (!obj) { + dev_err(&pdev->dev, + "device _DSM execution failed for turning wifi on\n"); + return -EIO; + } + ACPI_FREE(obj); + + return 0; +} diff --git a/drivers/net/wireless/marvell/mwifiex/pcie_quirks.h b/drivers/net/wireless/marvell/mwifiex/pcie_quirks.h index 8ec4176d698f..25370c5a4f59 100644 --- a/drivers/net/wireless/marvell/mwifiex/pcie_quirks.h +++ b/drivers/net/wireless/marvell/mwifiex/pcie_quirks.h @@ -19,5 +19,11 @@ #define QUIRK_FW_RST_D3COLD BIT(0) +/* Surface 3 and Surface Pro 3 have the same _DSM method but need to + * be handled differently. Currently, only S3 is supported. + */ +#define QUIRK_FW_RST_WSID_S3 BIT(1) + void mwifiex_initialize_quirks(struct pcie_service_card *card); int mwifiex_pcie_reset_d3cold_quirk(struct pci_dev *pdev); +int mwifiex_pcie_reset_wsid_quirk(struct pci_dev *pdev); -- 2.37.2 From 049a6554fbbc067d9868381304fe31eafec54e78 Mon Sep 17 00:00:00 2001 From: Tsuchiya Yuto Date: Wed, 30 Sep 2020 18:08:24 +0900 Subject: [PATCH] mwifiex: pcie: (OEMB) add quirk for Surface 3 with broken DMI table (made referring to http://git.osdn.net/view?p=android-x86/kernel.git;a=commitdiff;h=18e2e857c57633b25b3b4120f212224a108cd883) On some Surface 3, the DMI table gets corrupted for unknown reasons and breaks existing DMI matching used for device-specific quirks. This commit adds the (broken) DMI info for the affected Surface 3. On affected systems, DMI info will look like this: $ grep . /sys/devices/virtual/dmi/id/{bios_vendor,board_name,board_vendor,\ chassis_vendor,product_name,sys_vendor} /sys/devices/virtual/dmi/id/bios_vendor:American Megatrends Inc. /sys/devices/virtual/dmi/id/board_name:OEMB /sys/devices/virtual/dmi/id/board_vendor:OEMB /sys/devices/virtual/dmi/id/chassis_vendor:OEMB /sys/devices/virtual/dmi/id/product_name:OEMB /sys/devices/virtual/dmi/id/sys_vendor:OEMB Expected: $ grep . /sys/devices/virtual/dmi/id/{bios_vendor,board_name,board_vendor,\ chassis_vendor,product_name,sys_vendor} /sys/devices/virtual/dmi/id/bios_vendor:American Megatrends Inc. /sys/devices/virtual/dmi/id/board_name:Surface 3 /sys/devices/virtual/dmi/id/board_vendor:Microsoft Corporation /sys/devices/virtual/dmi/id/chassis_vendor:Microsoft Corporation /sys/devices/virtual/dmi/id/product_name:Surface 3 /sys/devices/virtual/dmi/id/sys_vendor:Microsoft Corporation Signed-off-by: Tsuchiya Yuto Patchset: mwifiex --- drivers/net/wireless/marvell/mwifiex/pcie_quirks.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/net/wireless/marvell/mwifiex/pcie_quirks.c b/drivers/net/wireless/marvell/mwifiex/pcie_quirks.c index 563dd0d5ac79..32e2f000e57b 100644 --- a/drivers/net/wireless/marvell/mwifiex/pcie_quirks.c +++ b/drivers/net/wireless/marvell/mwifiex/pcie_quirks.c @@ -106,6 +106,15 @@ static const struct dmi_system_id mwifiex_quirk_table[] = { }, .driver_data = (void *)QUIRK_FW_RST_WSID_S3, }, + { + .ident = "Surface 3", + .matches = { + DMI_EXACT_MATCH(DMI_BIOS_VENDOR, "American Megatrends Inc."), + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "OEMB"), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "OEMB"), + }, + .driver_data = (void *)QUIRK_FW_RST_WSID_S3, + }, {} }; -- 2.37.2 From e57e1aaeb600e6ac0ada3d73083ba11369d37734 Mon Sep 17 00:00:00 2001 From: Tsuchiya Yuto Date: Sun, 4 Oct 2020 00:11:49 +0900 Subject: [PATCH] mwifiex: pcie: disable bridge_d3 for Surface gen4+ Currently, mwifiex fw will crash after suspend on recent kernel series. On Windows, it seems that the root port of wifi will never enter D3 state (stay on D0 state). And on Linux, disabling the D3 state for the bridge fixes fw crashing after suspend. This commit disables the D3 state of root port on driver initialization and fixes fw crashing after suspend. Signed-off-by: Tsuchiya Yuto Patchset: mwifiex --- drivers/net/wireless/marvell/mwifiex/pcie.c | 7 +++++ .../wireless/marvell/mwifiex/pcie_quirks.c | 27 +++++++++++++------ .../wireless/marvell/mwifiex/pcie_quirks.h | 1 + 3 files changed, 27 insertions(+), 8 deletions(-) diff --git a/drivers/net/wireless/marvell/mwifiex/pcie.c b/drivers/net/wireless/marvell/mwifiex/pcie.c index 033648526f16..ca6bcbe4794c 100644 --- a/drivers/net/wireless/marvell/mwifiex/pcie.c +++ b/drivers/net/wireless/marvell/mwifiex/pcie.c @@ -380,6 +380,7 @@ static int mwifiex_pcie_probe(struct pci_dev *pdev, const struct pci_device_id *ent) { struct pcie_service_card *card; + struct pci_dev *parent_pdev = pci_upstream_bridge(pdev); int ret; pr_debug("info: vendor=0x%4.04X device=0x%4.04X rev=%d\n", @@ -421,6 +422,12 @@ static int mwifiex_pcie_probe(struct pci_dev *pdev, return -1; } + /* disable bridge_d3 for Surface gen4+ devices to fix fw crashing + * after suspend + */ + if (card->quirks & QUIRK_NO_BRIDGE_D3) + parent_pdev->bridge_d3 = false; + return 0; } diff --git a/drivers/net/wireless/marvell/mwifiex/pcie_quirks.c b/drivers/net/wireless/marvell/mwifiex/pcie_quirks.c index 32e2f000e57b..356401bab59c 100644 --- a/drivers/net/wireless/marvell/mwifiex/pcie_quirks.c +++ b/drivers/net/wireless/marvell/mwifiex/pcie_quirks.c @@ -38,7 +38,8 @@ static const struct dmi_system_id mwifiex_quirk_table[] = { DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"), DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Pro 4"), }, - .driver_data = (void *)QUIRK_FW_RST_D3COLD, + .driver_data = (void *)(QUIRK_FW_RST_D3COLD | + QUIRK_NO_BRIDGE_D3), }, { .ident = "Surface Pro 5", @@ -47,7 +48,8 @@ static const struct dmi_system_id mwifiex_quirk_table[] = { DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"), DMI_EXACT_MATCH(DMI_PRODUCT_SKU, "Surface_Pro_1796"), }, - .driver_data = (void *)QUIRK_FW_RST_D3COLD, + .driver_data = (void *)(QUIRK_FW_RST_D3COLD | + QUIRK_NO_BRIDGE_D3), }, { .ident = "Surface Pro 5 (LTE)", @@ -56,7 +58,8 @@ static const struct dmi_system_id mwifiex_quirk_table[] = { DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"), DMI_EXACT_MATCH(DMI_PRODUCT_SKU, "Surface_Pro_1807"), }, - .driver_data = (void *)QUIRK_FW_RST_D3COLD, + .driver_data = (void *)(QUIRK_FW_RST_D3COLD | + QUIRK_NO_BRIDGE_D3), }, { .ident = "Surface Pro 6", @@ -64,7 +67,8 @@ static const struct dmi_system_id mwifiex_quirk_table[] = { DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"), DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Pro 6"), }, - .driver_data = (void *)QUIRK_FW_RST_D3COLD, + .driver_data = (void *)(QUIRK_FW_RST_D3COLD | + QUIRK_NO_BRIDGE_D3), }, { .ident = "Surface Book 1", @@ -72,7 +76,8 @@ static const struct dmi_system_id mwifiex_quirk_table[] = { DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"), DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Book"), }, - .driver_data = (void *)QUIRK_FW_RST_D3COLD, + .driver_data = (void *)(QUIRK_FW_RST_D3COLD | + QUIRK_NO_BRIDGE_D3), }, { .ident = "Surface Book 2", @@ -80,7 +85,8 @@ static const struct dmi_system_id mwifiex_quirk_table[] = { DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"), DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Book 2"), }, - .driver_data = (void *)QUIRK_FW_RST_D3COLD, + .driver_data = (void *)(QUIRK_FW_RST_D3COLD | + QUIRK_NO_BRIDGE_D3), }, { .ident = "Surface Laptop 1", @@ -88,7 +94,8 @@ static const struct dmi_system_id mwifiex_quirk_table[] = { DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"), DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Laptop"), }, - .driver_data = (void *)QUIRK_FW_RST_D3COLD, + .driver_data = (void *)(QUIRK_FW_RST_D3COLD | + QUIRK_NO_BRIDGE_D3), }, { .ident = "Surface Laptop 2", @@ -96,7 +103,8 @@ static const struct dmi_system_id mwifiex_quirk_table[] = { DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"), DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Laptop 2"), }, - .driver_data = (void *)QUIRK_FW_RST_D3COLD, + .driver_data = (void *)(QUIRK_FW_RST_D3COLD | + QUIRK_NO_BRIDGE_D3), }, { .ident = "Surface 3", @@ -134,6 +142,9 @@ void mwifiex_initialize_quirks(struct pcie_service_card *card) if (card->quirks & QUIRK_FW_RST_WSID_S3) dev_info(&pdev->dev, "quirk reset_wsid for Surface 3 enabled\n"); + if (card->quirks & QUIRK_NO_BRIDGE_D3) + dev_info(&pdev->dev, + "quirk no_brigde_d3 enabled\n"); } static void mwifiex_pcie_set_power_d3cold(struct pci_dev *pdev) diff --git a/drivers/net/wireless/marvell/mwifiex/pcie_quirks.h b/drivers/net/wireless/marvell/mwifiex/pcie_quirks.h index 25370c5a4f59..a1de111ad1db 100644 --- a/drivers/net/wireless/marvell/mwifiex/pcie_quirks.h +++ b/drivers/net/wireless/marvell/mwifiex/pcie_quirks.h @@ -23,6 +23,7 @@ * be handled differently. Currently, only S3 is supported. */ #define QUIRK_FW_RST_WSID_S3 BIT(1) +#define QUIRK_NO_BRIDGE_D3 BIT(2) void mwifiex_initialize_quirks(struct pcie_service_card *card); int mwifiex_pcie_reset_d3cold_quirk(struct pci_dev *pdev); -- 2.37.2 From 789551567a6cf98e8ad0ffabcc70570e77919cf0 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Jonas=20Dre=C3=9Fler?= Date: Tue, 3 Nov 2020 13:28:04 +0100 Subject: [PATCH] mwifiex: Add quirk resetting the PCI bridge on MS Surface devices The most recent firmware of the 88W8897 card reports a hardcoded LTR value to the system during initialization, probably as an (unsuccessful) attempt of the developers to fix firmware crashes. This LTR value prevents most of the Microsoft Surface devices from entering deep powersaving states (either platform C-State 10 or S0ix state), because the exit latency of that state would be higher than what the card can tolerate. Turns out the card works just the same (including the firmware crashes) no matter if that hardcoded LTR value is reported or not, so it's kind of useless and only prevents us from saving power. To get rid of those hardcoded LTR reports, it's possible to reset the PCI bridge device after initializing the cards firmware. I'm not exactly sure why that works, maybe the power management subsystem of the PCH resets its stored LTR values when doing a function level reset of the bridge device. Doing the reset once after starting the wifi firmware works very well, probably because the firmware only reports that LTR value a single time during firmware startup. Patchset: mwifiex --- drivers/net/wireless/marvell/mwifiex/pcie.c | 12 +++++++++ .../wireless/marvell/mwifiex/pcie_quirks.c | 26 +++++++++++++------ .../wireless/marvell/mwifiex/pcie_quirks.h | 1 + 3 files changed, 31 insertions(+), 8 deletions(-) diff --git a/drivers/net/wireless/marvell/mwifiex/pcie.c b/drivers/net/wireless/marvell/mwifiex/pcie.c index ca6bcbe4794c..24bcd22a2618 100644 --- a/drivers/net/wireless/marvell/mwifiex/pcie.c +++ b/drivers/net/wireless/marvell/mwifiex/pcie.c @@ -1781,9 +1781,21 @@ mwifiex_pcie_send_boot_cmd(struct mwifiex_adapter *adapter, struct sk_buff *skb) static int mwifiex_pcie_init_fw_port(struct mwifiex_adapter *adapter) { struct pcie_service_card *card = adapter->card; + struct pci_dev *pdev = card->dev; + struct pci_dev *parent_pdev = pci_upstream_bridge(pdev); const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; int tx_wrap = card->txbd_wrptr & reg->tx_wrap_mask; + /* Trigger a function level reset of the PCI bridge device, this makes + * the firmware of PCIe 88W8897 cards stop reporting a fixed LTR value + * that prevents the system from entering package C10 and S0ix powersaving + * states. + * We need to do it here because it must happen after firmware + * initialization and this function is called after that is done. + */ + if (card->quirks & QUIRK_DO_FLR_ON_BRIDGE) + pci_reset_function(parent_pdev); + /* Write the RX ring read pointer in to reg->rx_rdptr */ if (mwifiex_write_reg(adapter, reg->rx_rdptr, card->rxbd_rdptr | tx_wrap)) { diff --git a/drivers/net/wireless/marvell/mwifiex/pcie_quirks.c b/drivers/net/wireless/marvell/mwifiex/pcie_quirks.c index 356401bab59c..6437f067d07a 100644 --- a/drivers/net/wireless/marvell/mwifiex/pcie_quirks.c +++ b/drivers/net/wireless/marvell/mwifiex/pcie_quirks.c @@ -39,7 +39,8 @@ static const struct dmi_system_id mwifiex_quirk_table[] = { DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Pro 4"), }, .driver_data = (void *)(QUIRK_FW_RST_D3COLD | - QUIRK_NO_BRIDGE_D3), + QUIRK_NO_BRIDGE_D3 | + QUIRK_DO_FLR_ON_BRIDGE), }, { .ident = "Surface Pro 5", @@ -49,7 +50,8 @@ static const struct dmi_system_id mwifiex_quirk_table[] = { DMI_EXACT_MATCH(DMI_PRODUCT_SKU, "Surface_Pro_1796"), }, .driver_data = (void *)(QUIRK_FW_RST_D3COLD | - QUIRK_NO_BRIDGE_D3), + QUIRK_NO_BRIDGE_D3 | + QUIRK_DO_FLR_ON_BRIDGE), }, { .ident = "Surface Pro 5 (LTE)", @@ -59,7 +61,8 @@ static const struct dmi_system_id mwifiex_quirk_table[] = { DMI_EXACT_MATCH(DMI_PRODUCT_SKU, "Surface_Pro_1807"), }, .driver_data = (void *)(QUIRK_FW_RST_D3COLD | - QUIRK_NO_BRIDGE_D3), + QUIRK_NO_BRIDGE_D3 | + QUIRK_DO_FLR_ON_BRIDGE), }, { .ident = "Surface Pro 6", @@ -68,7 +71,8 @@ static const struct dmi_system_id mwifiex_quirk_table[] = { DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Pro 6"), }, .driver_data = (void *)(QUIRK_FW_RST_D3COLD | - QUIRK_NO_BRIDGE_D3), + QUIRK_NO_BRIDGE_D3 | + QUIRK_DO_FLR_ON_BRIDGE), }, { .ident = "Surface Book 1", @@ -77,7 +81,8 @@ static const struct dmi_system_id mwifiex_quirk_table[] = { DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Book"), }, .driver_data = (void *)(QUIRK_FW_RST_D3COLD | - QUIRK_NO_BRIDGE_D3), + QUIRK_NO_BRIDGE_D3 | + QUIRK_DO_FLR_ON_BRIDGE), }, { .ident = "Surface Book 2", @@ -86,7 +91,8 @@ static const struct dmi_system_id mwifiex_quirk_table[] = { DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Book 2"), }, .driver_data = (void *)(QUIRK_FW_RST_D3COLD | - QUIRK_NO_BRIDGE_D3), + QUIRK_NO_BRIDGE_D3 | + QUIRK_DO_FLR_ON_BRIDGE), }, { .ident = "Surface Laptop 1", @@ -95,7 +101,8 @@ static const struct dmi_system_id mwifiex_quirk_table[] = { DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Laptop"), }, .driver_data = (void *)(QUIRK_FW_RST_D3COLD | - QUIRK_NO_BRIDGE_D3), + QUIRK_NO_BRIDGE_D3 | + QUIRK_DO_FLR_ON_BRIDGE), }, { .ident = "Surface Laptop 2", @@ -104,7 +111,8 @@ static const struct dmi_system_id mwifiex_quirk_table[] = { DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Laptop 2"), }, .driver_data = (void *)(QUIRK_FW_RST_D3COLD | - QUIRK_NO_BRIDGE_D3), + QUIRK_NO_BRIDGE_D3 | + QUIRK_DO_FLR_ON_BRIDGE), }, { .ident = "Surface 3", @@ -145,6 +153,8 @@ void mwifiex_initialize_quirks(struct pcie_service_card *card) if (card->quirks & QUIRK_NO_BRIDGE_D3) dev_info(&pdev->dev, "quirk no_brigde_d3 enabled\n"); + if (card->quirks & QUIRK_DO_FLR_ON_BRIDGE) + dev_info(&pdev->dev, "quirk do_flr_on_bridge enabled\n"); } static void mwifiex_pcie_set_power_d3cold(struct pci_dev *pdev) diff --git a/drivers/net/wireless/marvell/mwifiex/pcie_quirks.h b/drivers/net/wireless/marvell/mwifiex/pcie_quirks.h index a1de111ad1db..0e429779bb04 100644 --- a/drivers/net/wireless/marvell/mwifiex/pcie_quirks.h +++ b/drivers/net/wireless/marvell/mwifiex/pcie_quirks.h @@ -24,6 +24,7 @@ */ #define QUIRK_FW_RST_WSID_S3 BIT(1) #define QUIRK_NO_BRIDGE_D3 BIT(2) +#define QUIRK_DO_FLR_ON_BRIDGE BIT(3) void mwifiex_initialize_quirks(struct pcie_service_card *card); int mwifiex_pcie_reset_d3cold_quirk(struct pci_dev *pdev); -- 2.37.2 From f22fcdf3ebd08bb02727db9dbb101199486b72fe Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Jonas=20Dre=C3=9Fler?= Date: Thu, 25 Mar 2021 11:33:02 +0100 Subject: [PATCH] Bluetooth: btusb: Lower passive lescan interval on Marvell 88W8897 The Marvell 88W8897 combined wifi and bluetooth card (pcie+usb version) is used in a lot of Microsoft Surface devices, and all those devices suffer from very low 2.4GHz wifi connection speeds while bluetooth is enabled. The reason for that is that the default passive scanning interval for Bluetooth Low Energy devices is quite high in Linux (interval of 60 msec and scan window of 30 msec, see hci_core.c), and the Marvell chip is known for its bad bt+wifi coexisting performance. So decrease that passive scan interval and make the scan window shorter on this particular device to allow for spending more time transmitting wifi signals: The new scan interval is 250 msec (0x190 * 0.625 msec) and the new scan window is 6.25 msec (0xa * 0,625 msec). This change has a very large impact on the 2.4GHz wifi speeds and gets it up to performance comparable with the Windows driver, which seems to apply a similar quirk. The interval and window length were tested and found to work very well with a lot of Bluetooth Low Energy devices, including the Surface Pen, a Bluetooth Speaker and two modern Bluetooth headphones. All devices were discovered immediately after turning them on. Even lower values were also tested, but they introduced longer delays until devices get discovered. Patchset: mwifiex --- drivers/bluetooth/btusb.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index aaba2d737178..5d29e592cd34 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -63,6 +63,7 @@ static struct usb_driver btusb_driver; #define BTUSB_INTEL_BROKEN_SHUTDOWN_LED BIT(24) #define BTUSB_INTEL_BROKEN_INITIAL_NCMD BIT(25) #define BTUSB_INTEL_NO_WBS_SUPPORT BIT(26) +#define BTUSB_LOWER_LESCAN_INTERVAL BIT(27) static const struct usb_device_id btusb_table[] = { /* Generic Bluetooth USB device */ @@ -382,6 +383,7 @@ static const struct usb_device_id blacklist_table[] = { { USB_DEVICE(0x1286, 0x2044), .driver_info = BTUSB_MARVELL }, { USB_DEVICE(0x1286, 0x2046), .driver_info = BTUSB_MARVELL }, { USB_DEVICE(0x1286, 0x204e), .driver_info = BTUSB_MARVELL }, + { USB_DEVICE(0x1286, 0x204c), .driver_info = BTUSB_LOWER_LESCAN_INTERVAL }, /* Intel Bluetooth devices */ { USB_DEVICE(0x8087, 0x0025), .driver_info = BTUSB_INTEL_COMBINED }, @@ -3803,6 +3805,19 @@ static int btusb_probe(struct usb_interface *intf, if (id->driver_info & BTUSB_MARVELL) hdev->set_bdaddr = btusb_set_bdaddr_marvell; + /* The Marvell 88W8897 combined wifi and bluetooth card is known for + * very bad bt+wifi coexisting performance. + * + * Decrease the passive BT Low Energy scan interval a bit + * (0x0190 * 0.625 msec = 250 msec) and make the scan window shorter + * (0x000a * 0,625 msec = 6.25 msec). This allows for significantly + * higher wifi throughput while passively scanning for BT LE devices. + */ + if (id->driver_info & BTUSB_LOWER_LESCAN_INTERVAL) { + hdev->le_scan_interval = 0x0190; + hdev->le_scan_window = 0x000a; + } + if (IS_ENABLED(CONFIG_BT_HCIBTUSB_MTK) && (id->driver_info & BTUSB_MEDIATEK)) { hdev->setup = btusb_mtk_setup; -- 2.37.2 From ba89cc0544c937b4429cbe410f5285beefb7c33c Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Jonas=20Dre=C3=9Fler?= Date: Tue, 10 Nov 2020 12:49:56 +0100 Subject: [PATCH] mwifiex: Use non-posted PCI register writes On the 88W8897 card it's very important the TX ring write pointer is updated correctly to its new value before setting the TX ready interrupt, otherwise the firmware appears to crash (probably because it's trying to DMA-read from the wrong place). Since PCI uses "posted writes" when writing to a register, it's not guaranteed that a write will happen immediately. That means the pointer might be outdated when setting the TX ready interrupt, leading to firmware crashes especially when ASPM L1 and L1 substates are enabled (because of the higher link latency, the write will probably take longer). So fix those firmware crashes by always forcing non-posted writes. We do that by simply reading back the register after writing it, just as a lot of other drivers do. There are two reproducers that are fixed with this patch: 1) During rx/tx traffic and with ASPM L1 substates enabled (the enabled substates are platform dependent), the firmware crashes and eventually a command timeout appears in the logs. That crash is fixed by using a non-posted write in mwifiex_pcie_send_data(). 2) When sending lots of commands to the card, waking it up from sleep in very quick intervals, the firmware eventually crashes. That crash appears to be fixed by some other non-posted write included here. Patchset: mwifiex --- drivers/net/wireless/marvell/mwifiex/pcie.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/net/wireless/marvell/mwifiex/pcie.c b/drivers/net/wireless/marvell/mwifiex/pcie.c index 24bcd22a2618..b4ad0113a035 100644 --- a/drivers/net/wireless/marvell/mwifiex/pcie.c +++ b/drivers/net/wireless/marvell/mwifiex/pcie.c @@ -238,6 +238,12 @@ static int mwifiex_write_reg(struct mwifiex_adapter *adapter, int reg, u32 data) iowrite32(data, card->pci_mmap1 + reg); + /* Do a read-back, which makes the write non-posted, ensuring the + * completion before returning. + * The firmware of the 88W8897 card is buggy and this avoids crashes. + */ + ioread32(card->pci_mmap1 + reg); + return 0; } -- 2.37.2 From 30632c24ae7c8839dce9174016895849acd1f31a Mon Sep 17 00:00:00 2001 From: Maximilian Luz Date: Sat, 27 Feb 2021 00:45:52 +0100 Subject: [PATCH] ath10k: Add module parameters to override board files Some Surface devices, specifically the Surface Go and AMD version of the Surface Laptop 3 (wich both come with QCA6174 WiFi chips), work better with a different board file, as it seems that the firmeware included upstream is buggy. As it is generally not a good idea to randomly overwrite files, let alone doing so via packages, we add module parameters to override those file names in the driver. This allows us to package/deploy the override via a modprobe.d config. Signed-off-by: Maximilian Luz Patchset: ath10k --- drivers/net/wireless/ath/ath10k/core.c | 58 ++++++++++++++++++++++++++ 1 file changed, 58 insertions(+) diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c index 688177453b07..e400a0318838 100644 --- a/drivers/net/wireless/ath/ath10k/core.c +++ b/drivers/net/wireless/ath/ath10k/core.c @@ -36,6 +36,9 @@ static bool skip_otp; static bool rawmode; static bool fw_diag_log; +static char *override_board = ""; +static char *override_board2 = ""; + unsigned long ath10k_coredump_mask = BIT(ATH10K_FW_CRASH_DUMP_REGISTERS) | BIT(ATH10K_FW_CRASH_DUMP_CE_DATA); @@ -48,6 +51,9 @@ module_param(rawmode, bool, 0644); module_param(fw_diag_log, bool, 0644); module_param_named(coredump_mask, ath10k_coredump_mask, ulong, 0444); +module_param(override_board, charp, 0644); +module_param(override_board2, charp, 0644); + MODULE_PARM_DESC(debug_mask, "Debugging mask"); MODULE_PARM_DESC(uart_print, "Uart target debugging"); MODULE_PARM_DESC(skip_otp, "Skip otp failure for calibration in testmode"); @@ -56,6 +62,9 @@ MODULE_PARM_DESC(rawmode, "Use raw 802.11 frame datapath"); MODULE_PARM_DESC(coredump_mask, "Bitfield of what to include in firmware crash file"); MODULE_PARM_DESC(fw_diag_log, "Diag based fw log debugging"); +MODULE_PARM_DESC(override_board, "Override for board.bin file"); +MODULE_PARM_DESC(override_board2, "Override for board-2.bin file"); + static const struct ath10k_hw_params ath10k_hw_params_list[] = { { .id = QCA988X_HW_2_0_VERSION, @@ -876,6 +885,42 @@ static int ath10k_init_configure_target(struct ath10k *ar) return 0; } +static const char *ath10k_override_board_fw_file(struct ath10k *ar, + const char *file) +{ + if (strcmp(file, "board.bin") == 0) { + if (strcmp(override_board, "") == 0) + return file; + + if (strcmp(override_board, "none") == 0) { + dev_info(ar->dev, "firmware override: pretending 'board.bin' does not exist\n"); + return NULL; + } + + dev_info(ar->dev, "firmware override: replacing 'board.bin' with '%s'\n", + override_board); + + return override_board; + } + + if (strcmp(file, "board-2.bin") == 0) { + if (strcmp(override_board2, "") == 0) + return file; + + if (strcmp(override_board2, "none") == 0) { + dev_info(ar->dev, "firmware override: pretending 'board-2.bin' does not exist\n"); + return NULL; + } + + dev_info(ar->dev, "firmware override: replacing 'board-2.bin' with '%s'\n", + override_board2); + + return override_board2; + } + + return file; +} + static const struct firmware *ath10k_fetch_fw_file(struct ath10k *ar, const char *dir, const char *file) @@ -890,6 +935,19 @@ static const struct firmware *ath10k_fetch_fw_file(struct ath10k *ar, if (dir == NULL) dir = "."; + /* HACK: Override board.bin and board-2.bin files if specified. + * + * Some Surface devices perform better with a different board + * configuration. To this end, one would need to replace the board.bin + * file with the modified config and remove the board-2.bin file. + * Unfortunately, that's not a solution that we can easily package. So + * we add module options to perform these overrides here. + */ + + file = ath10k_override_board_fw_file(ar, file); + if (!file) + return ERR_PTR(-ENOENT); + snprintf(filename, sizeof(filename), "%s/%s", dir, file); ret = firmware_request_nowarn(&fw, filename, ar->dev); ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot fw request '%s': %d\n", -- 2.37.2 From 008ca80c4bb8eff2cfc4dd3f35398c7c268be04b Mon Sep 17 00:00:00 2001 From: Dorian Stoll Date: Thu, 30 Jul 2020 13:21:53 +0200 Subject: [PATCH] misc: mei: Add missing IPTS device IDs Patchset: ipts --- drivers/misc/mei/hw-me-regs.h | 1 + drivers/misc/mei/pci-me.c | 1 + 2 files changed, 2 insertions(+) diff --git a/drivers/misc/mei/hw-me-regs.h b/drivers/misc/mei/hw-me-regs.h index 15e8e2b322b1..91587b808323 100644 --- a/drivers/misc/mei/hw-me-regs.h +++ b/drivers/misc/mei/hw-me-regs.h @@ -92,6 +92,7 @@ #define MEI_DEV_ID_CDF 0x18D3 /* Cedar Fork */ #define MEI_DEV_ID_ICP_LP 0x34E0 /* Ice Lake Point LP */ +#define MEI_DEV_ID_ICP_LP_3 0x34E4 /* Ice Lake Point LP 3 (iTouch) */ #define MEI_DEV_ID_ICP_N 0x38E0 /* Ice Lake Point N */ #define MEI_DEV_ID_JSP_N 0x4DE0 /* Jasper Lake Point N */ diff --git a/drivers/misc/mei/pci-me.c b/drivers/misc/mei/pci-me.c index 5435604327a7..1165ee4f5928 100644 --- a/drivers/misc/mei/pci-me.c +++ b/drivers/misc/mei/pci-me.c @@ -97,6 +97,7 @@ static const struct pci_device_id mei_me_pci_tbl[] = { {MEI_PCI_DEVICE(MEI_DEV_ID_CMP_H_3, MEI_ME_PCH8_ITOUCH_CFG)}, {MEI_PCI_DEVICE(MEI_DEV_ID_ICP_LP, MEI_ME_PCH12_CFG)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_ICP_LP_3, MEI_ME_PCH12_CFG)}, {MEI_PCI_DEVICE(MEI_DEV_ID_ICP_N, MEI_ME_PCH12_CFG)}, {MEI_PCI_DEVICE(MEI_DEV_ID_TGP_LP, MEI_ME_PCH15_CFG)}, -- 2.37.2 From 1a47efd83fd677ac0c7cae35b07bdb172e87cee3 Mon Sep 17 00:00:00 2001 From: Dorian Stoll Date: Thu, 6 Aug 2020 11:20:41 +0200 Subject: [PATCH] misc: Add support for Intel Precise Touch & Stylus Based on linux-surface/intel-precise-touch@3f362c Signed-off-by: Dorian Stoll Patchset: ipts --- drivers/misc/Kconfig | 1 + drivers/misc/Makefile | 1 + drivers/misc/ipts/Kconfig | 17 ++ drivers/misc/ipts/Makefile | 12 ++ drivers/misc/ipts/context.h | 47 +++++ drivers/misc/ipts/control.c | 113 +++++++++++ drivers/misc/ipts/control.h | 24 +++ drivers/misc/ipts/mei.c | 125 ++++++++++++ drivers/misc/ipts/protocol.h | 347 ++++++++++++++++++++++++++++++++++ drivers/misc/ipts/receiver.c | 224 ++++++++++++++++++++++ drivers/misc/ipts/receiver.h | 16 ++ drivers/misc/ipts/resources.c | 128 +++++++++++++ drivers/misc/ipts/resources.h | 17 ++ drivers/misc/ipts/uapi.c | 208 ++++++++++++++++++++ drivers/misc/ipts/uapi.h | 47 +++++ 15 files changed, 1327 insertions(+) create mode 100644 drivers/misc/ipts/Kconfig create mode 100644 drivers/misc/ipts/Makefile create mode 100644 drivers/misc/ipts/context.h create mode 100644 drivers/misc/ipts/control.c create mode 100644 drivers/misc/ipts/control.h create mode 100644 drivers/misc/ipts/mei.c create mode 100644 drivers/misc/ipts/protocol.h create mode 100644 drivers/misc/ipts/receiver.c create mode 100644 drivers/misc/ipts/receiver.h create mode 100644 drivers/misc/ipts/resources.c create mode 100644 drivers/misc/ipts/resources.h create mode 100644 drivers/misc/ipts/uapi.c create mode 100644 drivers/misc/ipts/uapi.h diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 41d2bb0ae23a..effb258d4848 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -500,4 +500,5 @@ source "drivers/misc/cardreader/Kconfig" source "drivers/misc/habanalabs/Kconfig" source "drivers/misc/uacce/Kconfig" source "drivers/misc/pvpanic/Kconfig" +source "drivers/misc/ipts/Kconfig" endmenu diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index 70e800e9127f..a8d1e9447025 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -60,3 +60,4 @@ obj-$(CONFIG_XILINX_SDFEC) += xilinx_sdfec.o obj-$(CONFIG_HISI_HIKEY_USB) += hisi_hikey_usb.o obj-$(CONFIG_HI6421V600_IRQ) += hi6421v600-irq.o obj-$(CONFIG_OPEN_DICE) += open-dice.o +obj-$(CONFIG_MISC_IPTS) += ipts/ diff --git a/drivers/misc/ipts/Kconfig b/drivers/misc/ipts/Kconfig new file mode 100644 index 000000000000..83e2a930c396 --- /dev/null +++ b/drivers/misc/ipts/Kconfig @@ -0,0 +1,17 @@ +# SPDX-License-Identifier: GPL-2.0-or-later + +config MISC_IPTS + tristate "Intel Precise Touch & Stylus" + depends on INTEL_MEI + help + Say Y here if your system has a touchscreen using Intels + Precise Touch & Stylus (IPTS) technology. + + If unsure say N. + + To compile this driver as a module, choose M here: the + module will be called ipts. + + Building this driver alone will not give you a working touchscreen. + It only exposed a userspace API that can be used by a daemon to + receive and process data from the touchscreen hardware. diff --git a/drivers/misc/ipts/Makefile b/drivers/misc/ipts/Makefile new file mode 100644 index 000000000000..8f58b9adbc94 --- /dev/null +++ b/drivers/misc/ipts/Makefile @@ -0,0 +1,12 @@ +# SPDX-License-Identifier: GPL-2.0-or-later +# +# Makefile for the IPTS touchscreen driver +# + +obj-$(CONFIG_MISC_IPTS) += ipts.o +ipts-objs := control.o +ipts-objs += mei.o +ipts-objs += receiver.o +ipts-objs += resources.o +ipts-objs += uapi.o + diff --git a/drivers/misc/ipts/context.h b/drivers/misc/ipts/context.h new file mode 100644 index 000000000000..f4b06a2d3f72 --- /dev/null +++ b/drivers/misc/ipts/context.h @@ -0,0 +1,47 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright (c) 2016 Intel Corporation + * Copyright (c) 2020 Dorian Stoll + * + * Linux driver for Intel Precise Touch & Stylus + */ + +#ifndef _IPTS_CONTEXT_H_ +#define _IPTS_CONTEXT_H_ + +#include +#include +#include +#include + +#include "protocol.h" + +enum ipts_host_status { + IPTS_HOST_STATUS_STARTING, + IPTS_HOST_STATUS_STARTED, + IPTS_HOST_STATUS_STOPPING, + IPTS_HOST_STATUS_STOPPED, +}; + +struct ipts_buffer_info { + u8 *address; + dma_addr_t dma_address; +}; + +struct ipts_context { + struct mei_cl_device *cldev; + struct device *dev; + + bool restart; + enum ipts_host_status status; + struct ipts_get_device_info_rsp device_info; + + struct ipts_buffer_info data[IPTS_BUFFERS]; + struct ipts_buffer_info doorbell; + + struct ipts_buffer_info feedback[IPTS_BUFFERS]; + struct ipts_buffer_info workqueue; + struct ipts_buffer_info host2me; +}; + +#endif /* _IPTS_CONTEXT_H_ */ diff --git a/drivers/misc/ipts/control.c b/drivers/misc/ipts/control.c new file mode 100644 index 000000000000..a1d1f97a13d7 --- /dev/null +++ b/drivers/misc/ipts/control.c @@ -0,0 +1,113 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (c) 2016 Intel Corporation + * Copyright (c) 2020 Dorian Stoll + * + * Linux driver for Intel Precise Touch & Stylus + */ + +#include + +#include "context.h" +#include "protocol.h" +#include "resources.h" +#include "uapi.h" + +int ipts_control_send(struct ipts_context *ipts, u32 code, void *payload, + size_t size) +{ + int ret; + struct ipts_command cmd; + + memset(&cmd, 0, sizeof(struct ipts_command)); + cmd.code = code; + + if (payload && size > 0) + memcpy(&cmd.payload, payload, size); + + ret = mei_cldev_send(ipts->cldev, (u8 *)&cmd, sizeof(cmd.code) + size); + if (ret >= 0) + return 0; + + /* + * During shutdown the device might get pulled away from below our feet. + * Dont log an error in this case, because it will confuse people. + */ + if (ret != -ENODEV || ipts->status != IPTS_HOST_STATUS_STOPPING) + dev_err(ipts->dev, "Error while sending: 0x%X:%d\n", code, ret); + + return ret; +} + +int ipts_control_send_feedback(struct ipts_context *ipts, u32 buffer) +{ + struct ipts_feedback_cmd cmd; + + memset(&cmd, 0, sizeof(struct ipts_feedback_cmd)); + cmd.buffer = buffer; + + return ipts_control_send(ipts, IPTS_CMD_FEEDBACK, &cmd, + sizeof(struct ipts_feedback_cmd)); +} + +int ipts_control_set_feature(struct ipts_context *ipts, u8 report, u8 value) +{ + struct ipts_feedback_buffer *feedback; + + memset(ipts->host2me.address, 0, ipts->device_info.feedback_size); + feedback = (struct ipts_feedback_buffer *)ipts->host2me.address; + + feedback->cmd_type = IPTS_FEEDBACK_CMD_TYPE_NONE; + feedback->data_type = IPTS_FEEDBACK_DATA_TYPE_SET_FEATURES; + feedback->buffer = IPTS_HOST2ME_BUFFER; + feedback->size = 2; + feedback->payload[0] = report; + feedback->payload[1] = value; + + return ipts_control_send_feedback(ipts, IPTS_HOST2ME_BUFFER); +} + +int ipts_control_start(struct ipts_context *ipts) +{ + if (ipts->status != IPTS_HOST_STATUS_STOPPED) + return -EBUSY; + + dev_info(ipts->dev, "Starting IPTS\n"); + ipts->status = IPTS_HOST_STATUS_STARTING; + ipts->restart = false; + + ipts_uapi_link(ipts); + return ipts_control_send(ipts, IPTS_CMD_GET_DEVICE_INFO, NULL, 0); +} + +int ipts_control_stop(struct ipts_context *ipts) +{ + int ret; + + if (ipts->status == IPTS_HOST_STATUS_STOPPING) + return -EBUSY; + + if (ipts->status == IPTS_HOST_STATUS_STOPPED) + return -EBUSY; + + dev_info(ipts->dev, "Stopping IPTS\n"); + ipts->status = IPTS_HOST_STATUS_STOPPING; + + ipts_uapi_unlink(); + ipts_resources_free(ipts); + + ret = ipts_control_send_feedback(ipts, 0); + if (ret == -ENODEV) + ipts->status = IPTS_HOST_STATUS_STOPPED; + + return ret; +} + +int ipts_control_restart(struct ipts_context *ipts) +{ + if (ipts->restart) + return -EBUSY; + + ipts->restart = true; + return ipts_control_stop(ipts); +} diff --git a/drivers/misc/ipts/control.h b/drivers/misc/ipts/control.h new file mode 100644 index 000000000000..2c44e9e0e99f --- /dev/null +++ b/drivers/misc/ipts/control.h @@ -0,0 +1,24 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright (c) 2016 Intel Corporation + * Copyright (c) 2020 Dorian Stoll + * + * Linux driver for Intel Precise Touch & Stylus + */ + +#ifndef _IPTS_CONTROL_H_ +#define _IPTS_CONTROL_H_ + +#include + +#include "context.h" + +int ipts_control_send(struct ipts_context *ipts, u32 cmd, void *payload, + size_t size); +int ipts_control_send_feedback(struct ipts_context *ipts, u32 buffer); +int ipts_control_set_feature(struct ipts_context *ipts, u8 report, u8 value); +int ipts_control_start(struct ipts_context *ipts); +int ipts_control_restart(struct ipts_context *ipts); +int ipts_control_stop(struct ipts_context *ipts); + +#endif /* _IPTS_CONTROL_H_ */ diff --git a/drivers/misc/ipts/mei.c b/drivers/misc/ipts/mei.c new file mode 100644 index 000000000000..59ecf13e00d2 --- /dev/null +++ b/drivers/misc/ipts/mei.c @@ -0,0 +1,125 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (c) 2016 Intel Corporation + * Copyright (c) 2020 Dorian Stoll + * + * Linux driver for Intel Precise Touch & Stylus + */ + +#include +#include +#include +#include +#include +#include + +#include "context.h" +#include "control.h" +#include "protocol.h" +#include "receiver.h" +#include "uapi.h" + +static int ipts_mei_set_dma_mask(struct mei_cl_device *cldev) +{ + int ret; + + ret = dma_coerce_mask_and_coherent(&cldev->dev, DMA_BIT_MASK(64)); + if (!ret) + return 0; + + return dma_coerce_mask_and_coherent(&cldev->dev, DMA_BIT_MASK(32)); +} + +static int ipts_mei_probe(struct mei_cl_device *cldev, + const struct mei_cl_device_id *id) +{ + int ret; + struct ipts_context *ipts; + + if (ipts_mei_set_dma_mask(cldev)) { + dev_err(&cldev->dev, "Failed to set DMA mask for IPTS\n"); + return -EFAULT; + } + + ret = mei_cldev_enable(cldev); + if (ret) { + dev_err(&cldev->dev, "Failed to enable MEI device: %d\n", ret); + return ret; + } + + ipts = kzalloc(sizeof(*ipts), GFP_KERNEL); + if (!ipts) { + mei_cldev_disable(cldev); + return -ENOMEM; + } + + ipts->cldev = cldev; + ipts->dev = &cldev->dev; + ipts->status = IPTS_HOST_STATUS_STOPPED; + + mei_cldev_set_drvdata(cldev, ipts); + mei_cldev_register_rx_cb(cldev, ipts_receiver_callback); + + return ipts_control_start(ipts); +} + +static void ipts_mei_remove(struct mei_cl_device *cldev) +{ + int i; + struct ipts_context *ipts = mei_cldev_get_drvdata(cldev); + + ipts_control_stop(ipts); + + for (i = 0; i < 20; i++) { + if (ipts->status == IPTS_HOST_STATUS_STOPPED) + break; + + msleep(25); + } + + mei_cldev_disable(cldev); + kfree(ipts); +} + +static struct mei_cl_device_id ipts_mei_device_id_table[] = { + { "", IPTS_MEI_UUID, MEI_CL_VERSION_ANY }, + {}, +}; +MODULE_DEVICE_TABLE(mei, ipts_mei_device_id_table); + +static struct mei_cl_driver ipts_mei_driver = { + .id_table = ipts_mei_device_id_table, + .name = "ipts", + .probe = ipts_mei_probe, + .remove = ipts_mei_remove, +}; + +static int __init ipts_mei_init(void) +{ + int ret; + + ret = ipts_uapi_init(); + if (ret) + return ret; + + ret = mei_cldev_driver_register(&ipts_mei_driver); + if (ret) { + ipts_uapi_free(); + return ret; + } + + return 0; +} + +static void __exit ipts_mei_exit(void) +{ + mei_cldev_driver_unregister(&ipts_mei_driver); + ipts_uapi_free(); +} + +MODULE_DESCRIPTION("IPTS touchscreen driver"); +MODULE_AUTHOR("Dorian Stoll "); +MODULE_LICENSE("GPL"); + +module_init(ipts_mei_init); +module_exit(ipts_mei_exit); diff --git a/drivers/misc/ipts/protocol.h b/drivers/misc/ipts/protocol.h new file mode 100644 index 000000000000..c3458904a94d --- /dev/null +++ b/drivers/misc/ipts/protocol.h @@ -0,0 +1,347 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright (c) 2016 Intel Corporation + * Copyright (c) 2020 Dorian Stoll + * + * Linux driver for Intel Precise Touch & Stylus + */ + +#ifndef _IPTS_PROTOCOL_H_ +#define _IPTS_PROTOCOL_H_ + +#include + +/* + * The MEI client ID for IPTS functionality. + */ +#define IPTS_MEI_UUID \ + UUID_LE(0x3e8d0870, 0x271a, 0x4208, 0x8e, 0xb5, 0x9a, 0xcb, 0x94, \ + 0x02, 0xae, 0x04) + +/* + * Queries the device for vendor specific information. + * + * The command must not contain any payload. + * The response will contain struct ipts_get_device_info_rsp as payload. + */ +#define IPTS_CMD_GET_DEVICE_INFO 0x00000001 +#define IPTS_RSP_GET_DEVICE_INFO 0x80000001 + +/* + * Sets the mode that IPTS will operate in. + * + * The command must contain struct ipts_set_mode_cmd as payload. + * The response will not contain any payload. + */ +#define IPTS_CMD_SET_MODE 0x00000002 +#define IPTS_RSP_SET_MODE 0x80000002 + +/* + * Configures the memory buffers that the ME will use + * for passing data to the host. + * + * The command must contain struct ipts_set_mem_window_cmd as payload. + * The response will not contain any payload. + */ +#define IPTS_CMD_SET_MEM_WINDOW 0x00000003 +#define IPTS_RSP_SET_MEM_WINDOW 0x80000003 + +/* + * Signals that the host is ready to receive data to the ME. + * + * The command must not contain any payload. + * The response will not contain any payload. + */ +#define IPTS_CMD_READY_FOR_DATA 0x00000005 +#define IPTS_RSP_READY_FOR_DATA 0x80000005 + +/* + * Signals that a buffer can be refilled to the ME. + * + * The command must contain struct ipts_feedback_cmd as payload. + * The response will not contain any payload. + */ +#define IPTS_CMD_FEEDBACK 0x00000006 +#define IPTS_RSP_FEEDBACK 0x80000006 + +/* + * Resets the data flow from the ME to the hosts and + * clears the buffers that were set with SET_MEM_WINDOW. + * + * The command must not contain any payload. + * The response will not contain any payload. + */ +#define IPTS_CMD_CLEAR_MEM_WINDOW 0x00000007 +#define IPTS_RSP_CLEAR_MEM_WINDOW 0x80000007 + +/* + * Instructs the ME to reset the touch sensor. + * + * The command must contain struct ipts_reset_sensor_cmd as payload. + * The response will not contain any payload. + */ +#define IPTS_CMD_RESET_SENSOR 0x0000000B +#define IPTS_RSP_RESET_SENSOR 0x8000000B + +/** + * enum ipts_status - Possible status codes returned by IPTS commands. + * @IPTS_STATUS_SUCCESS: Operation completed successfully. + * @IPTS_STATUS_INVALID_PARAMS: Command contained a payload with invalid parameters. + * @IPTS_STATUS_ACCESS_DENIED: ME could not validate buffer addresses supplied by host. + * @IPTS_STATUS_CMD_SIZE_ERROR: Command contains an invalid payload. + * @IPTS_STATUS_NOT_READY: Buffer addresses have not been set. + * @IPTS_STATUS_REQUEST_OUTSTANDING: There is an outstanding command of the same type. + * The host must wait for a response before sending another + * command of the same type. + * @IPTS_STATUS_NO_SENSOR_FOUND: No sensor could be found. Either no sensor is connected, it + * has not been initialized yet, or the system is improperly + * configured. + * @IPTS_STATUS_OUT_OF_MEMORY: Not enough free memory for requested operation. + * @IPTS_STATUS_INTERNAL_ERROR: An unexpected error occurred. + * @IPTS_STATUS_SENSOR_DISABLED: The sensor has been disabled and must be reinitialized. + * @IPTS_STATUS_COMPAT_CHECK_FAIL: Compatibility revision check between sensor and ME failed. + * The host can ignore this error and attempt to continue. + * @IPTS_STATUS_SENSOR_EXPECTED_RESET: The sensor went through a reset initiated by ME or host. + * @IPTS_STATUS_SENSOR_UNEXPECTED_RESET: The sensor went through an unexpected reset. + * @IPTS_STATUS_RESET_FAILED: Requested sensor reset failed to complete. + * @IPTS_STATUS_TIMEOUT: The operation timed out. + * @IPTS_STATUS_TEST_MODE_FAIL: Test mode pattern did not match expected values. + * @IPTS_STATUS_SENSOR_FAIL_FATAL: The sensor reported a fatal error during reset sequence. + * Further progress is not possible. + * @IPTS_STATUS_SENSOR_FAIL_NONFATAL: The sensor reported a fatal error during reset sequence. + * The host can attempt to continue. + * @IPTS_STATUS_INVALID_DEVICE_CAPS: The device reported invalid capabilities. + * @IPTS_STATUS_QUIESCE_IO_IN_PROGRESS: Command cannot be completed until Quiesce IO is done. + */ +enum ipts_status { + IPTS_STATUS_SUCCESS = 0, + IPTS_STATUS_INVALID_PARAMS = 1, + IPTS_STATUS_ACCESS_DENIED = 2, + IPTS_STATUS_CMD_SIZE_ERROR = 3, + IPTS_STATUS_NOT_READY = 4, + IPTS_STATUS_REQUEST_OUTSTANDING = 5, + IPTS_STATUS_NO_SENSOR_FOUND = 6, + IPTS_STATUS_OUT_OF_MEMORY = 7, + IPTS_STATUS_INTERNAL_ERROR = 8, + IPTS_STATUS_SENSOR_DISABLED = 9, + IPTS_STATUS_COMPAT_CHECK_FAIL = 10, + IPTS_STATUS_SENSOR_EXPECTED_RESET = 11, + IPTS_STATUS_SENSOR_UNEXPECTED_RESET = 12, + IPTS_STATUS_RESET_FAILED = 13, + IPTS_STATUS_TIMEOUT = 14, + IPTS_STATUS_TEST_MODE_FAIL = 15, + IPTS_STATUS_SENSOR_FAIL_FATAL = 16, + IPTS_STATUS_SENSOR_FAIL_NONFATAL = 17, + IPTS_STATUS_INVALID_DEVICE_CAPS = 18, + IPTS_STATUS_QUIESCE_IO_IN_PROGRESS = 19, +}; + +/* + * The amount of buffers that is used for IPTS + */ +#define IPTS_BUFFERS 16 + +/* + * The special buffer ID that is used for direct host2me feedback. + */ +#define IPTS_HOST2ME_BUFFER IPTS_BUFFERS + +/** + * enum ipts_mode - Operation mode for IPTS hardware + * @IPTS_MODE_SINGLETOUCH: Fallback that supports only one finger and no stylus. + * The data is received as a HID report with ID 64. + * @IPTS_MODE_MULTITOUCH: The "proper" operation mode for IPTS. It will return + * stylus data as well as capacitive heatmap touch data. + * This data needs to be processed in userspace. + */ +enum ipts_mode { + IPTS_MODE_SINGLETOUCH = 0, + IPTS_MODE_MULTITOUCH = 1, +}; + +/** + * struct ipts_set_mode_cmd - Payload for the SET_MODE command. + * @mode: The mode that IPTS should operate in. + */ +struct ipts_set_mode_cmd { + enum ipts_mode mode; + u8 reserved[12]; +} __packed; + +#define IPTS_WORKQUEUE_SIZE 8192 +#define IPTS_WORKQUEUE_ITEM_SIZE 16 + +/** + * struct ipts_set_mem_window_cmd - Payload for the SET_MEM_WINDOW command. + * @data_buffer_addr_lower: Lower 32 bits of the data buffer addresses. + * @data_buffer_addr_upper: Upper 32 bits of the data buffer addresses. + * @workqueue_addr_lower: Lower 32 bits of the workqueue buffer address. + * @workqueue_addr_upper: Upper 32 bits of the workqueue buffer address. + * @doorbell_addr_lower: Lower 32 bits of the doorbell buffer address. + * @doorbell_addr_upper: Upper 32 bits of the doorbell buffer address. + * @feedback_buffer_addr_lower: Lower 32 bits of the feedback buffer addresses. + * @feedback_buffer_addr_upper: Upper 32 bits of the feedback buffer addresses. + * @host2me_addr_lower: Lower 32 bits of the host2me buffer address. + * @host2me_addr_upper: Upper 32 bits of the host2me buffer address. + * @workqueue_item_size: Magic value. (IPTS_WORKQUEUE_ITEM_SIZE) + * @workqueue_size: Magic value. (IPTS_WORKQUEUE_SIZE) + * + * The data buffers are buffers that get filled with touch data by the ME. + * The doorbell buffer is a u32 that gets incremented by the ME once a data + * buffer has been filled with new data. + * + * The other buffers are required for using GuC submission with binary + * firmware. Since support for GuC submission has been dropped from i915, + * they are not used anymore, but they need to be allocated and passed, + * otherwise the hardware will refuse to start. + */ +struct ipts_set_mem_window_cmd { + u32 data_buffer_addr_lower[IPTS_BUFFERS]; + u32 data_buffer_addr_upper[IPTS_BUFFERS]; + u32 workqueue_addr_lower; + u32 workqueue_addr_upper; + u32 doorbell_addr_lower; + u32 doorbell_addr_upper; + u32 feedback_buffer_addr_lower[IPTS_BUFFERS]; + u32 feedback_buffer_addr_upper[IPTS_BUFFERS]; + u32 host2me_addr_lower; + u32 host2me_addr_upper; + u32 host2me_size; + u8 reserved1; + u8 workqueue_item_size; + u16 workqueue_size; + u8 reserved[32]; +} __packed; + +/** + * struct ipts_feedback_cmd - Payload for the FEEDBACK command. + * @buffer: The buffer that the ME should refill. + */ +struct ipts_feedback_cmd { + u32 buffer; + u8 reserved[12]; +} __packed; + +/** + * enum ipts_feedback_cmd_type - Commands that can be executed on the sensor through feedback. + */ +enum ipts_feedback_cmd_type { + IPTS_FEEDBACK_CMD_TYPE_NONE = 0, + IPTS_FEEDBACK_CMD_TYPE_SOFT_RESET = 1, + IPTS_FEEDBACK_CMD_TYPE_GOTO_ARMED = 2, + IPTS_FEEDBACK_CMD_TYPE_GOTO_SENSING = 3, + IPTS_FEEDBACK_CMD_TYPE_GOTO_SLEEP = 4, + IPTS_FEEDBACK_CMD_TYPE_GOTO_DOZE = 5, + IPTS_FEEDBACK_CMD_TYPE_HARD_RESET = 6, +}; + +/** + * enum ipts_feedback_data_type - Describes the data that a feedback buffer contains. + * @IPTS_FEEDBACK_DATA_TYPE_VENDOR: The buffer contains vendor specific feedback. + * @IPTS_FEEDBACK_DATA_TYPE_SET_FEATURES: The buffer contains a HID set features command. + * @IPTS_FEEDBACK_DATA_TYPE_GET_FEATURES: The buffer contains a HID get features command. + * @IPTS_FEEDBACK_DATA_TYPE_OUTPUT_REPORT: The buffer contains a HID output report. + * @IPTS_FEEDBACK_DATA_TYPE_STORE_DATA: The buffer contains calibration data for the sensor. + */ +enum ipts_feedback_data_type { + IPTS_FEEDBACK_DATA_TYPE_VENDOR = 0, + IPTS_FEEDBACK_DATA_TYPE_SET_FEATURES = 1, + IPTS_FEEDBACK_DATA_TYPE_GET_FEATURES = 2, + IPTS_FEEDBACK_DATA_TYPE_OUTPUT_REPORT = 3, + IPTS_FEEDBACK_DATA_TYPE_STORE_DATA = 4, +}; + +/** + * struct ipts_feedback_buffer - The contents of an IPTS feedback buffer. + * @cmd_type: A command that should be executed on the sensor. + * @size: The size of the payload to be written. + * @buffer: The ID of the buffer that contains this feedback data. + * @protocol: The protocol version of the EDS. + * @data_type: The type of payload that the buffer contains. + * @spi_offset: The offset at which to write the payload data. + * @payload: Payload for the feedback command, or 0 if no payload is sent. + */ +struct ipts_feedback_buffer { + enum ipts_feedback_cmd_type cmd_type; + u32 size; + u32 buffer; + u32 protocol; + enum ipts_feedback_data_type data_type; + u32 spi_offset; + u8 reserved[40]; + u8 payload[]; +} __packed; + +/** + * enum ipts_reset_type - Possible ways of resetting the touch sensor + * @IPTS_RESET_TYPE_HARD: Perform hardware reset using GPIO pin. + * @IPTS_RESET_TYPE_SOFT: Perform software reset using SPI interface. + */ +enum ipts_reset_type { + IPTS_RESET_TYPE_HARD = 0, + IPTS_RESET_TYPE_SOFT = 1, +}; + +/** + * struct ipts_reset_sensor_cmd - Payload for the RESET_SENSOR command. + * @type: What type of reset should be performed. + */ +struct ipts_reset_sensor_cmd { + enum ipts_reset_type type; + u8 reserved[4]; +} __packed; + +/** + * struct ipts_command - A message sent from the host to the ME. + * @code: The message code describing the command. (see IPTS_CMD_*) + * @payload: Payload for the command, or 0 if no payload is required. + */ +struct ipts_command { + u32 code; + u8 payload[320]; +} __packed; + +/** + * struct ipts_device_info - Payload for the GET_DEVICE_INFO response. + * @vendor_id: Vendor ID of the touch sensor. + * @device_id: Device ID of the touch sensor. + * @hw_rev: Hardware revision of the touch sensor. + * @fw_rev: Firmware revision of the touch sensor. + * @data_size: Required size of one data buffer. + * @feedback_size: Required size of one feedback buffer. + * @mode: Current operation mode of IPTS. + * @max_contacts: The amount of concurrent touches supported by the sensor. + */ +struct ipts_get_device_info_rsp { + u16 vendor_id; + u16 device_id; + u32 hw_rev; + u32 fw_rev; + u32 data_size; + u32 feedback_size; + enum ipts_mode mode; + u8 max_contacts; + u8 reserved[19]; +} __packed; + +/** + * struct ipts_feedback_rsp - Payload for the FEEDBACK response. + * @buffer: The buffer that has received feedback. + */ +struct ipts_feedback_rsp { + u32 buffer; +} __packed; + +/** + * struct ipts_response - A message sent from the ME to the host. + * @code: The message code describing the response. (see IPTS_RSP_*) + * @status: The status code returned by the command. + * @payload: Payload returned by the command. + */ +struct ipts_response { + u32 code; + enum ipts_status status; + u8 payload[80]; +} __packed; + +#endif /* _IPTS_PROTOCOL_H_ */ diff --git a/drivers/misc/ipts/receiver.c b/drivers/misc/ipts/receiver.c new file mode 100644 index 000000000000..23dca13c2139 --- /dev/null +++ b/drivers/misc/ipts/receiver.c @@ -0,0 +1,224 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (c) 2016 Intel Corporation + * Copyright (c) 2020 Dorian Stoll + * + * Linux driver for Intel Precise Touch & Stylus + */ + +#include +#include +#include + +#include "context.h" +#include "control.h" +#include "protocol.h" +#include "resources.h" + +/* + * Temporary parameter to guard gen7 multitouch mode. + * Remove once gen7 has stable iptsd support. + */ +static bool gen7mt; +module_param(gen7mt, bool, 0644); + +static int ipts_receiver_handle_get_device_info(struct ipts_context *ipts, + struct ipts_response *rsp) +{ + struct ipts_set_mode_cmd cmd; + + memcpy(&ipts->device_info, rsp->payload, + sizeof(struct ipts_get_device_info_rsp)); + + memset(&cmd, 0, sizeof(struct ipts_set_mode_cmd)); + cmd.mode = IPTS_MODE_MULTITOUCH; + + return ipts_control_send(ipts, IPTS_CMD_SET_MODE, &cmd, + sizeof(struct ipts_set_mode_cmd)); +} + +static int ipts_receiver_handle_set_mode(struct ipts_context *ipts) +{ + int i, ret; + struct ipts_set_mem_window_cmd cmd; + + ret = ipts_resources_alloc(ipts); + if (ret) { + dev_err(ipts->dev, "Failed to allocate resources\n"); + return ret; + } + + memset(&cmd, 0, sizeof(struct ipts_set_mem_window_cmd)); + + for (i = 0; i < IPTS_BUFFERS; i++) { + cmd.data_buffer_addr_lower[i] = + lower_32_bits(ipts->data[i].dma_address); + + cmd.data_buffer_addr_upper[i] = + upper_32_bits(ipts->data[i].dma_address); + + cmd.feedback_buffer_addr_lower[i] = + lower_32_bits(ipts->feedback[i].dma_address); + + cmd.feedback_buffer_addr_upper[i] = + upper_32_bits(ipts->feedback[i].dma_address); + } + + cmd.workqueue_addr_lower = lower_32_bits(ipts->workqueue.dma_address); + cmd.workqueue_addr_upper = upper_32_bits(ipts->workqueue.dma_address); + + cmd.doorbell_addr_lower = lower_32_bits(ipts->doorbell.dma_address); + cmd.doorbell_addr_upper = upper_32_bits(ipts->doorbell.dma_address); + + cmd.host2me_addr_lower = lower_32_bits(ipts->host2me.dma_address); + cmd.host2me_addr_upper = upper_32_bits(ipts->host2me.dma_address); + + cmd.workqueue_size = IPTS_WORKQUEUE_SIZE; + cmd.workqueue_item_size = IPTS_WORKQUEUE_ITEM_SIZE; + + return ipts_control_send(ipts, IPTS_CMD_SET_MEM_WINDOW, &cmd, + sizeof(struct ipts_set_mem_window_cmd)); +} + +static int ipts_receiver_handle_set_mem_window(struct ipts_context *ipts) +{ + int ret; + + dev_info(ipts->dev, "Device %04hX:%04hX ready\n", + ipts->device_info.vendor_id, ipts->device_info.device_id); + ipts->status = IPTS_HOST_STATUS_STARTED; + + ret = ipts_control_send(ipts, IPTS_CMD_READY_FOR_DATA, NULL, 0); + if (ret) + return ret; + + if (!gen7mt) + return 0; + + return ipts_control_set_feature(ipts, 0x5, 0x1); +} + +static int ipts_receiver_handle_feedback(struct ipts_context *ipts, + struct ipts_response *rsp) +{ + struct ipts_feedback_rsp feedback; + + if (ipts->status != IPTS_HOST_STATUS_STOPPING) + return 0; + + memcpy(&feedback, rsp->payload, sizeof(feedback)); + + if (feedback.buffer < IPTS_BUFFERS - 1) + return ipts_control_send_feedback(ipts, feedback.buffer + 1); + + return ipts_control_send(ipts, IPTS_CMD_CLEAR_MEM_WINDOW, NULL, 0); +} + +static int ipts_receiver_handle_clear_mem_window(struct ipts_context *ipts) +{ + ipts->status = IPTS_HOST_STATUS_STOPPED; + + if (ipts->restart) + return ipts_control_start(ipts); + + return 0; +} + +static bool ipts_receiver_sensor_was_reset(u32 status) +{ + return status == IPTS_STATUS_SENSOR_EXPECTED_RESET || + status == IPTS_STATUS_SENSOR_UNEXPECTED_RESET; +} + +static bool ipts_receiver_handle_error(struct ipts_context *ipts, + struct ipts_response *rsp) +{ + bool error; + + switch (rsp->status) { + case IPTS_STATUS_SUCCESS: + case IPTS_STATUS_COMPAT_CHECK_FAIL: + error = false; + break; + case IPTS_STATUS_INVALID_PARAMS: + error = rsp->code != IPTS_RSP_FEEDBACK; + break; + case IPTS_STATUS_SENSOR_DISABLED: + error = ipts->status != IPTS_HOST_STATUS_STOPPING; + break; + default: + error = true; + break; + } + + if (!error) + return false; + + dev_err(ipts->dev, "Command 0x%08x failed: %d\n", rsp->code, + rsp->status); + + if (ipts_receiver_sensor_was_reset(rsp->status)) { + dev_err(ipts->dev, "Sensor was reset\n"); + + if (ipts_control_restart(ipts)) + dev_err(ipts->dev, "Failed to restart IPTS\n"); + } + + return true; +} + +static void ipts_receiver_handle_response(struct ipts_context *ipts, + struct ipts_response *rsp) +{ + int ret; + + if (ipts_receiver_handle_error(ipts, rsp)) + return; + + switch (rsp->code) { + case IPTS_RSP_GET_DEVICE_INFO: + ret = ipts_receiver_handle_get_device_info(ipts, rsp); + break; + case IPTS_RSP_SET_MODE: + ret = ipts_receiver_handle_set_mode(ipts); + break; + case IPTS_RSP_SET_MEM_WINDOW: + ret = ipts_receiver_handle_set_mem_window(ipts); + break; + case IPTS_RSP_FEEDBACK: + ret = ipts_receiver_handle_feedback(ipts, rsp); + break; + case IPTS_RSP_CLEAR_MEM_WINDOW: + ret = ipts_receiver_handle_clear_mem_window(ipts); + break; + default: + ret = 0; + break; + } + + if (!ret) + return; + + dev_err(ipts->dev, "Error while handling response 0x%08x: %d\n", + rsp->code, ret); + + if (ipts_control_stop(ipts)) + dev_err(ipts->dev, "Failed to stop IPTS\n"); +} + +void ipts_receiver_callback(struct mei_cl_device *cldev) +{ + int ret; + struct ipts_response rsp; + struct ipts_context *ipts; + + ipts = mei_cldev_get_drvdata(cldev); + + ret = mei_cldev_recv(cldev, (u8 *)&rsp, sizeof(struct ipts_response)); + if (ret <= 0) { + dev_err(ipts->dev, "Error while reading response: %d\n", ret); + return; + } + + ipts_receiver_handle_response(ipts, &rsp); +} diff --git a/drivers/misc/ipts/receiver.h b/drivers/misc/ipts/receiver.h new file mode 100644 index 000000000000..7f075afa7ef8 --- /dev/null +++ b/drivers/misc/ipts/receiver.h @@ -0,0 +1,16 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright (c) 2016 Intel Corporation + * Copyright (c) 2020 Dorian Stoll + * + * Linux driver for Intel Precise Touch & Stylus + */ + +#ifndef _IPTS_RECEIVER_H_ +#define _IPTS_RECEIVER_H_ + +#include + +void ipts_receiver_callback(struct mei_cl_device *cldev); + +#endif /* _IPTS_RECEIVER_H_ */ diff --git a/drivers/misc/ipts/resources.c b/drivers/misc/ipts/resources.c new file mode 100644 index 000000000000..8e3a2409e438 --- /dev/null +++ b/drivers/misc/ipts/resources.c @@ -0,0 +1,128 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (c) 2016 Intel Corporation + * Copyright (c) 2020 Dorian Stoll + * + * Linux driver for Intel Precise Touch & Stylus + */ + +#include + +#include "context.h" + +void ipts_resources_free(struct ipts_context *ipts) +{ + int i; + struct ipts_buffer_info *buffers; + + u32 data_buffer_size = ipts->device_info.data_size; + u32 feedback_buffer_size = ipts->device_info.feedback_size; + + buffers = ipts->data; + for (i = 0; i < IPTS_BUFFERS; i++) { + if (!buffers[i].address) + continue; + + dma_free_coherent(ipts->dev, data_buffer_size, + buffers[i].address, buffers[i].dma_address); + + buffers[i].address = NULL; + buffers[i].dma_address = 0; + } + + buffers = ipts->feedback; + for (i = 0; i < IPTS_BUFFERS; i++) { + if (!buffers[i].address) + continue; + + dma_free_coherent(ipts->dev, feedback_buffer_size, + buffers[i].address, buffers[i].dma_address); + + buffers[i].address = NULL; + buffers[i].dma_address = 0; + } + + if (ipts->doorbell.address) { + dma_free_coherent(ipts->dev, sizeof(u32), + ipts->doorbell.address, + ipts->doorbell.dma_address); + + ipts->doorbell.address = NULL; + ipts->doorbell.dma_address = 0; + } + + if (ipts->workqueue.address) { + dma_free_coherent(ipts->dev, sizeof(u32), + ipts->workqueue.address, + ipts->workqueue.dma_address); + + ipts->workqueue.address = NULL; + ipts->workqueue.dma_address = 0; + } + + if (ipts->host2me.address) { + dma_free_coherent(ipts->dev, feedback_buffer_size, + ipts->host2me.address, + ipts->host2me.dma_address); + + ipts->host2me.address = NULL; + ipts->host2me.dma_address = 0; + } +} + +int ipts_resources_alloc(struct ipts_context *ipts) +{ + int i; + struct ipts_buffer_info *buffers; + + u32 data_buffer_size = ipts->device_info.data_size; + u32 feedback_buffer_size = ipts->device_info.feedback_size; + + buffers = ipts->data; + for (i = 0; i < IPTS_BUFFERS; i++) { + buffers[i].address = + dma_alloc_coherent(ipts->dev, data_buffer_size, + &buffers[i].dma_address, GFP_KERNEL); + + if (!buffers[i].address) + goto release_resources; + } + + buffers = ipts->feedback; + for (i = 0; i < IPTS_BUFFERS; i++) { + buffers[i].address = + dma_alloc_coherent(ipts->dev, feedback_buffer_size, + &buffers[i].dma_address, GFP_KERNEL); + + if (!buffers[i].address) + goto release_resources; + } + + ipts->doorbell.address = + dma_alloc_coherent(ipts->dev, sizeof(u32), + &ipts->doorbell.dma_address, GFP_KERNEL); + + if (!ipts->doorbell.address) + goto release_resources; + + ipts->workqueue.address = + dma_alloc_coherent(ipts->dev, sizeof(u32), + &ipts->workqueue.dma_address, GFP_KERNEL); + + if (!ipts->workqueue.address) + goto release_resources; + + ipts->host2me.address = + dma_alloc_coherent(ipts->dev, feedback_buffer_size, + &ipts->host2me.dma_address, GFP_KERNEL); + + if (!ipts->workqueue.address) + goto release_resources; + + return 0; + +release_resources: + + ipts_resources_free(ipts); + return -ENOMEM; +} diff --git a/drivers/misc/ipts/resources.h b/drivers/misc/ipts/resources.h new file mode 100644 index 000000000000..fdac0eee9156 --- /dev/null +++ b/drivers/misc/ipts/resources.h @@ -0,0 +1,17 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright (c) 2016 Intel Corporation + * Copyright (c) 2020 Dorian Stoll + * + * Linux driver for Intel Precise Touch & Stylus + */ + +#ifndef _IPTS_RESOURCES_H_ +#define _IPTS_RESOURCES_H_ + +#include "context.h" + +int ipts_resources_alloc(struct ipts_context *ipts); +void ipts_resources_free(struct ipts_context *ipts); + +#endif /* _IPTS_RESOURCES_H_ */ diff --git a/drivers/misc/ipts/uapi.c b/drivers/misc/ipts/uapi.c new file mode 100644 index 000000000000..598f0710ad64 --- /dev/null +++ b/drivers/misc/ipts/uapi.c @@ -0,0 +1,208 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (c) 2016 Intel Corporation + * Copyright (c) 2020 Dorian Stoll + * + * Linux driver for Intel Precise Touch & Stylus + */ + +#include +#include +#include +#include +#include +#include + +#include "context.h" +#include "control.h" +#include "protocol.h" +#include "uapi.h" + +struct ipts_uapi uapi; + +static ssize_t ipts_uapi_read(struct file *file, char __user *buf, size_t count, + loff_t *offset) +{ + int buffer; + int maxbytes; + struct ipts_context *ipts = uapi.ipts; + + buffer = MINOR(file->f_path.dentry->d_inode->i_rdev); + + if (!ipts || ipts->status != IPTS_HOST_STATUS_STARTED) + return -ENODEV; + + maxbytes = ipts->device_info.data_size - *offset; + if (maxbytes <= 0 || count > maxbytes) + return -EINVAL; + + if (copy_to_user(buf, ipts->data[buffer].address + *offset, count)) + return -EFAULT; + + return count; +} + +static long ipts_uapi_ioctl_get_device_ready(struct ipts_context *ipts, + unsigned long arg) +{ + void __user *buffer = (void __user *)arg; + u8 ready = 0; + + if (ipts) + ready = ipts->status == IPTS_HOST_STATUS_STARTED; + + if (copy_to_user(buffer, &ready, sizeof(u8))) + return -EFAULT; + + return 0; +} + +static long ipts_uapi_ioctl_get_device_info(struct ipts_context *ipts, + unsigned long arg) +{ + struct ipts_device_info info; + void __user *buffer = (void __user *)arg; + + if (!ipts || ipts->status != IPTS_HOST_STATUS_STARTED) + return -ENODEV; + + info.vendor = ipts->device_info.vendor_id; + info.product = ipts->device_info.device_id; + info.version = ipts->device_info.fw_rev; + info.buffer_size = ipts->device_info.data_size; + info.max_contacts = ipts->device_info.max_contacts; + + if (copy_to_user(buffer, &info, sizeof(struct ipts_device_info))) + return -EFAULT; + + return 0; +} + +static long ipts_uapi_ioctl_get_doorbell(struct ipts_context *ipts, + unsigned long arg) +{ + void __user *buffer = (void __user *)arg; + + if (!ipts || ipts->status != IPTS_HOST_STATUS_STARTED) + return -ENODEV; + + if (copy_to_user(buffer, ipts->doorbell.address, sizeof(u32))) + return -EFAULT; + + return 0; +} + +static long ipts_uapi_ioctl_send_feedback(struct ipts_context *ipts, + struct file *file) +{ + int ret; + u32 buffer; + + if (!ipts || ipts->status != IPTS_HOST_STATUS_STARTED) + return -ENODEV; + + buffer = MINOR(file->f_path.dentry->d_inode->i_rdev); + + ret = ipts_control_send_feedback(ipts, buffer); + if (ret) + return -EFAULT; + + return 0; +} + +static long ipts_uapi_ioctl_send_reset(struct ipts_context *ipts) +{ + int ret; + struct ipts_reset_sensor_cmd cmd; + + if (!ipts || ipts->status != IPTS_HOST_STATUS_STARTED) + return -ENODEV; + + memset(&cmd, 0, sizeof(struct ipts_reset_sensor_cmd)); + cmd.type = IPTS_RESET_TYPE_SOFT; + + ret = ipts_control_send(ipts, IPTS_CMD_RESET_SENSOR, &cmd, + sizeof(struct ipts_reset_sensor_cmd)); + + if (ret) + return -EFAULT; + + return 0; +} + +static long ipts_uapi_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + struct ipts_context *ipts = uapi.ipts; + + switch (cmd) { + case IPTS_IOCTL_GET_DEVICE_READY: + return ipts_uapi_ioctl_get_device_ready(ipts, arg); + case IPTS_IOCTL_GET_DEVICE_INFO: + return ipts_uapi_ioctl_get_device_info(ipts, arg); + case IPTS_IOCTL_GET_DOORBELL: + return ipts_uapi_ioctl_get_doorbell(ipts, arg); + case IPTS_IOCTL_SEND_FEEDBACK: + return ipts_uapi_ioctl_send_feedback(ipts, file); + case IPTS_IOCTL_SEND_RESET: + return ipts_uapi_ioctl_send_reset(ipts); + default: + return -ENOTTY; + } +} + +static const struct file_operations ipts_uapi_fops = { + .owner = THIS_MODULE, + .read = ipts_uapi_read, + .unlocked_ioctl = ipts_uapi_ioctl, +#ifdef CONFIG_COMPAT + .compat_ioctl = ipts_uapi_ioctl, +#endif +}; + +void ipts_uapi_link(struct ipts_context *ipts) +{ + uapi.ipts = ipts; +} + +void ipts_uapi_unlink(void) +{ + uapi.ipts = NULL; +} + +int ipts_uapi_init(void) +{ + int i, major; + + alloc_chrdev_region(&uapi.dev, 0, IPTS_BUFFERS, "ipts"); + uapi.class = class_create(THIS_MODULE, "ipts"); + + major = MAJOR(uapi.dev); + + cdev_init(&uapi.cdev, &ipts_uapi_fops); + uapi.cdev.owner = THIS_MODULE; + cdev_add(&uapi.cdev, MKDEV(major, 0), IPTS_BUFFERS); + + for (i = 0; i < IPTS_BUFFERS; i++) { + device_create(uapi.class, NULL, MKDEV(major, i), NULL, + "ipts/%d", i); + } + + return 0; +} + +void ipts_uapi_free(void) +{ + int i; + int major; + + major = MAJOR(uapi.dev); + + for (i = 0; i < IPTS_BUFFERS; i++) + device_destroy(uapi.class, MKDEV(major, i)); + + cdev_del(&uapi.cdev); + + unregister_chrdev_region(MKDEV(major, 0), MINORMASK); + class_destroy(uapi.class); +} diff --git a/drivers/misc/ipts/uapi.h b/drivers/misc/ipts/uapi.h new file mode 100644 index 000000000000..53fb86a88f97 --- /dev/null +++ b/drivers/misc/ipts/uapi.h @@ -0,0 +1,47 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright (c) 2016 Intel Corporation + * Copyright (c) 2020 Dorian Stoll + * + * Linux driver for Intel Precise Touch & Stylus + */ + +#ifndef _IPTS_UAPI_H_ +#define _IPTS_UAPI_H_ + +#include + +#include "context.h" + +struct ipts_uapi { + dev_t dev; + struct class *class; + struct cdev cdev; + + struct ipts_context *ipts; +}; + +struct ipts_device_info { + __u16 vendor; + __u16 product; + __u32 version; + __u32 buffer_size; + __u8 max_contacts; + + /* For future expansion */ + __u8 reserved[19]; +}; + +#define IPTS_IOCTL_GET_DEVICE_READY _IOR(0x86, 0x01, __u8) +#define IPTS_IOCTL_GET_DEVICE_INFO _IOR(0x86, 0x02, struct ipts_device_info) +#define IPTS_IOCTL_GET_DOORBELL _IOR(0x86, 0x03, __u32) +#define IPTS_IOCTL_SEND_FEEDBACK _IO(0x86, 0x04) +#define IPTS_IOCTL_SEND_RESET _IO(0x86, 0x05) + +void ipts_uapi_link(struct ipts_context *ipts); +void ipts_uapi_unlink(void); + +int ipts_uapi_init(void); +void ipts_uapi_free(void); + +#endif /* _IPTS_UAPI_H_ */ -- 2.37.2 From 19ab90bc51c085bc71e899446a67b62b91d42050 Mon Sep 17 00:00:00 2001 From: Liban Hannan Date: Tue, 12 Apr 2022 23:31:12 +0100 Subject: [PATCH] iommu: ipts: use IOMMU passthrough mode for IPTS Adds a quirk so that IOMMU uses passthrough mode for the IPTS device. Otherwise, when IOMMU is enabled, IPTS produces DMAR errors like: DMAR: [DMA Read NO_PASID] Request device [00:16.4] fault addr 0x104ea3000 [fault reason 0x06] PTE Read access is not set This is very similar to the bug described at: https://bugs.launchpad.net/bugs/1958004 Fixed with the following patch which this patch basically copies: https://launchpadlibrarian.net/586396847/43255ca.diff Patchset: ipts --- drivers/iommu/intel/iommu.c | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c index 5c0dce78586a..825b524e81f3 100644 --- a/drivers/iommu/intel/iommu.c +++ b/drivers/iommu/intel/iommu.c @@ -37,6 +37,8 @@ #define IS_GFX_DEVICE(pdev) ((pdev->class >> 16) == PCI_BASE_CLASS_DISPLAY) #define IS_USB_DEVICE(pdev) ((pdev->class >> 8) == PCI_CLASS_SERIAL_USB) #define IS_ISA_DEVICE(pdev) ((pdev->class >> 8) == PCI_CLASS_BRIDGE_ISA) +#define IS_IPTS(pdev) ((pdev)->vendor == PCI_VENDOR_ID_INTEL && \ + ((pdev)->device == 0x9d3e)) #define IS_AZALIA(pdev) ((pdev)->vendor == 0x8086 && (pdev)->device == 0x3a3e) #define IOAPIC_RANGE_START (0xfee00000) @@ -307,12 +309,14 @@ int intel_iommu_enabled = 0; EXPORT_SYMBOL_GPL(intel_iommu_enabled); static int dmar_map_gfx = 1; +static int dmar_map_ipts = 1; static int intel_iommu_superpage = 1; static int iommu_identity_mapping; static int iommu_skip_te_disable; #define IDENTMAP_GFX 2 #define IDENTMAP_AZALIA 4 +#define IDENTMAP_IPTS 16 int intel_iommu_gfx_mapped; EXPORT_SYMBOL_GPL(intel_iommu_gfx_mapped); @@ -2659,6 +2663,9 @@ static int device_def_domain_type(struct device *dev) if ((iommu_identity_mapping & IDENTMAP_GFX) && IS_GFX_DEVICE(pdev)) return IOMMU_DOMAIN_IDENTITY; + + if ((iommu_identity_mapping & IDENTMAP_IPTS) && IS_IPTS(pdev)) + return IOMMU_DOMAIN_IDENTITY; } return 0; @@ -3095,6 +3102,9 @@ static int __init init_dmars(void) if (!dmar_map_gfx) iommu_identity_mapping |= IDENTMAP_GFX; + if (!dmar_map_ipts) + iommu_identity_mapping |= IDENTMAP_IPTS; + check_tylersburg_isoch(); ret = si_domain_init(hw_pass_through); @@ -4923,6 +4933,17 @@ static void quirk_iommu_igfx(struct pci_dev *dev) dmar_map_gfx = 0; } +static void quirk_iommu_ipts(struct pci_dev *dev) +{ + if (!IS_IPTS(dev)) + return; + + if (risky_device(dev)) + return; + + pci_info(dev, "Passthrough IOMMU for IPTS\n"); + dmar_map_ipts = 0; +} /* G4x/GM45 integrated gfx dmar support is totally busted. */ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2a40, quirk_iommu_igfx); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2e00, quirk_iommu_igfx); @@ -4958,6 +4979,9 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x1632, quirk_iommu_igfx); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x163A, quirk_iommu_igfx); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x163D, quirk_iommu_igfx); +/* disable IPTS dmar support */ +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x9D3E, quirk_iommu_ipts); + static void quirk_iommu_rwbf(struct pci_dev *dev) { if (risky_device(dev)) -- 2.37.2 From cf92a4b7a1b832df52b7eeb0dda93301585f1c48 Mon Sep 17 00:00:00 2001 From: Maximilian Luz Date: Fri, 27 May 2022 04:34:36 +0200 Subject: [PATCH] platform/surface: aggregator: Allow is_ssam_device() to be used when CONFIG_SURFACE_AGGREGATOR_BUS is disabled In SSAM subsystem drivers that handle both ACPI and SSAM-native client devices, we may want to check whether we have a SSAM (native) client device. Further, we may want to do this even when instantiation thereof cannot happen due to CONFIG_SURFACE_AGGREGATOR_BUS=n. Currently, doing so causes an error due to an undefined reference error due to ssam_device_type being placed in the bus source unit. Therefore, if CONFIG_SURFACE_AGGREGATOR_BUS is not defined, simply let is_ssam_device() return false to prevent this error. Signed-off-by: Maximilian Luz Link: https://lore.kernel.org/r/20220527023447.2460025-2-luzmaximilian@gmail.com Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede Patchset: surface-sam --- include/linux/surface_aggregator/device.h | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/include/linux/surface_aggregator/device.h b/include/linux/surface_aggregator/device.h index cc257097eb05..62b38b4487eb 100644 --- a/include/linux/surface_aggregator/device.h +++ b/include/linux/surface_aggregator/device.h @@ -177,6 +177,8 @@ struct ssam_device_driver { void (*remove)(struct ssam_device *sdev); }; +#ifdef CONFIG_SURFACE_AGGREGATOR_BUS + extern struct bus_type ssam_bus_type; extern const struct device_type ssam_device_type; @@ -193,6 +195,15 @@ static inline bool is_ssam_device(struct device *d) return d->type == &ssam_device_type; } +#else /* CONFIG_SURFACE_AGGREGATOR_BUS */ + +static inline bool is_ssam_device(struct device *d) +{ + return false; +} + +#endif /* CONFIG_SURFACE_AGGREGATOR_BUS */ + /** * to_ssam_device() - Casts the given device to a SSAM client device. * @d: The device to cast. -- 2.37.2 From 2c8f02e379bb72001844a5b28cf64d12422ace76 Mon Sep 17 00:00:00 2001 From: Maximilian Luz Date: Fri, 27 May 2022 04:34:37 +0200 Subject: [PATCH] platform/surface: aggregator: Allow devices to be marked as hot-removed Some SSAM devices, notably the keyboard cover (keyboard and touchpad) on the Surface Pro 8, can be hot-removed. When this occurs, communication with the device may fail and time out. This timeout can unnecessarily block and slow down device removal and even cause issues when the devices are detached and re-attached quickly. Thus, communication should generally be avoided once hot-removal is detected. While we already remove a device as soon as we detect its (hot-)removal, the corresponding device driver may still attempt to communicate with the device during teardown. This is especially critical as communication failure may also extend to disabling of events, which is typically done at that stage. Add a flag to allow marking devices as hot-removed. This can then be used during client driver teardown to check if any communication attempts should be avoided. Signed-off-by: Maximilian Luz Link: https://lore.kernel.org/r/20220527023447.2460025-3-luzmaximilian@gmail.com Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede Patchset: surface-sam --- include/linux/surface_aggregator/device.h | 48 +++++++++++++++++++++-- 1 file changed, 45 insertions(+), 3 deletions(-) diff --git a/include/linux/surface_aggregator/device.h b/include/linux/surface_aggregator/device.h index 62b38b4487eb..6df7c8d4e50e 100644 --- a/include/linux/surface_aggregator/device.h +++ b/include/linux/surface_aggregator/device.h @@ -148,17 +148,30 @@ struct ssam_device_uid { #define SSAM_SDEV(cat, tid, iid, fun) \ SSAM_DEVICE(SSAM_DOMAIN_SERIALHUB, SSAM_SSH_TC_##cat, tid, iid, fun) +/* + * enum ssam_device_flags - Flags for SSAM client devices. + * @SSAM_DEVICE_HOT_REMOVED_BIT: + * The device has been hot-removed. Further communication with it may time + * out and should be avoided. + */ +enum ssam_device_flags { + SSAM_DEVICE_HOT_REMOVED_BIT = 0, +}; + /** * struct ssam_device - SSAM client device. - * @dev: Driver model representation of the device. - * @ctrl: SSAM controller managing this device. - * @uid: UID identifying the device. + * @dev: Driver model representation of the device. + * @ctrl: SSAM controller managing this device. + * @uid: UID identifying the device. + * @flags: Device state flags, see &enum ssam_device_flags. */ struct ssam_device { struct device dev; struct ssam_controller *ctrl; struct ssam_device_uid uid; + + unsigned long flags; }; /** @@ -251,6 +264,35 @@ struct ssam_device *ssam_device_alloc(struct ssam_controller *ctrl, int ssam_device_add(struct ssam_device *sdev); void ssam_device_remove(struct ssam_device *sdev); +/** + * ssam_device_mark_hot_removed() - Mark the given device as hot-removed. + * @sdev: The device to mark as hot-removed. + * + * Mark the device as having been hot-removed. This signals drivers using the + * device that communication with the device should be avoided and may lead to + * timeouts. + */ +static inline void ssam_device_mark_hot_removed(struct ssam_device *sdev) +{ + dev_dbg(&sdev->dev, "marking device as hot-removed\n"); + set_bit(SSAM_DEVICE_HOT_REMOVED_BIT, &sdev->flags); +} + +/** + * ssam_device_is_hot_removed() - Check if the given device has been + * hot-removed. + * @sdev: The device to check. + * + * Checks if the given device has been marked as hot-removed. See + * ssam_device_mark_hot_removed() for more details. + * + * Return: Returns ``true`` if the device has been marked as hot-removed. + */ +static inline bool ssam_device_is_hot_removed(struct ssam_device *sdev) +{ + return test_bit(SSAM_DEVICE_HOT_REMOVED_BIT, &sdev->flags); +} + /** * ssam_device_get() - Increment reference count of SSAM client device. * @sdev: The device to increment the reference count of. -- 2.37.2 From 868fe0887d5a461e122d4de8ab5e3c1a46b48f8e Mon Sep 17 00:00:00 2001 From: Maximilian Luz Date: Fri, 27 May 2022 04:34:38 +0200 Subject: [PATCH] platform/surface: aggregator: Allow notifiers to avoid communication on unregistering When SSAM client devices have been (physically) hot-removed, communication attempts with those devices may fail and time out. This can even extend to event notifiers, due to which timeouts may occur during device removal, slowing down that process. Add a parameter to the notifier unregister function that allows skipping communication with the EC to prevent this. Furthermore, add wrappers for registering and unregistering notifiers belonging to SSAM client devices that automatically check if the device has been marked as hot-removed and communication should be avoided. Note that non-SSAM client devices can generally not be hot-removed, so also add a convenience wrapper for those, defaulting to allow communication. Signed-off-by: Maximilian Luz Link: https://lore.kernel.org/r/20220527023447.2460025-4-luzmaximilian@gmail.com Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede Patchset: surface-sam --- .../driver-api/surface_aggregator/client.rst | 6 +- .../platform/surface/aggregator/controller.c | 53 ++++++++++----- include/linux/surface_aggregator/controller.h | 24 ++++++- include/linux/surface_aggregator/device.h | 66 +++++++++++++++++++ 4 files changed, 128 insertions(+), 21 deletions(-) diff --git a/Documentation/driver-api/surface_aggregator/client.rst b/Documentation/driver-api/surface_aggregator/client.rst index e519d374c378..27f95abdbe99 100644 --- a/Documentation/driver-api/surface_aggregator/client.rst +++ b/Documentation/driver-api/surface_aggregator/client.rst @@ -17,6 +17,8 @@ .. |SSAM_DEVICE| replace:: :c:func:`SSAM_DEVICE` .. |ssam_notifier_register| replace:: :c:func:`ssam_notifier_register` .. |ssam_notifier_unregister| replace:: :c:func:`ssam_notifier_unregister` +.. |ssam_device_notifier_register| replace:: :c:func:`ssam_device_notifier_register` +.. |ssam_device_notifier_unregister| replace:: :c:func:`ssam_device_notifier_unregister` .. |ssam_request_sync| replace:: :c:func:`ssam_request_sync` .. |ssam_event_mask| replace:: :c:type:`enum ssam_event_mask ` @@ -312,7 +314,9 @@ Handling Events To receive events from the SAM EC, an event notifier must be registered for the desired event via |ssam_notifier_register|. The notifier must be unregistered via |ssam_notifier_unregister| once it is not required any -more. +more. For |ssam_device| type clients, the |ssam_device_notifier_register| and +|ssam_device_notifier_unregister| wrappers should be preferred as they properly +handle hot-removal of client devices. Event notifiers are registered by providing (at minimum) a callback to call in case an event has been received, the registry specifying how the event diff --git a/drivers/platform/surface/aggregator/controller.c b/drivers/platform/surface/aggregator/controller.c index b8c377b3f932..6de834b52b63 100644 --- a/drivers/platform/surface/aggregator/controller.c +++ b/drivers/platform/surface/aggregator/controller.c @@ -2199,16 +2199,26 @@ static int ssam_nf_refcount_enable(struct ssam_controller *ctrl, } /** - * ssam_nf_refcount_disable_free() - Disable event for reference count entry if it is - * no longer in use and free the corresponding entry. + * ssam_nf_refcount_disable_free() - Disable event for reference count entry if + * it is no longer in use and free the corresponding entry. * @ctrl: The controller to disable the event on. * @entry: The reference count entry for the event to be disabled. * @flags: The flags used for enabling the event on the EC. + * @ec: Flag specifying if the event should actually be disabled on the EC. * - * If the reference count equals zero, i.e. the event is no longer requested by - * any client, the event will be disabled and the corresponding reference count - * entry freed. The reference count entry must not be used any more after a - * call to this function. + * If ``ec`` equals ``true`` and the reference count equals zero (i.e. the + * event is no longer requested by any client), the specified event will be + * disabled on the EC via the corresponding request. + * + * If ``ec`` equals ``false``, no request will be sent to the EC and the event + * can be considered in a detached state (i.e. no longer used but still + * enabled). Disabling an event via this method may be required for + * hot-removable devices, where event disable requests may time out after the + * device has been physically removed. + * + * In both cases, if the reference count equals zero, the corresponding + * reference count entry will be freed. The reference count entry must not be + * used any more after a call to this function. * * Also checks if the flags used for disabling the event match the flags used * for enabling the event and warns if they do not (regardless of reference @@ -2223,7 +2233,7 @@ static int ssam_nf_refcount_enable(struct ssam_controller *ctrl, * returns the status of the event-enable EC command. */ static int ssam_nf_refcount_disable_free(struct ssam_controller *ctrl, - struct ssam_nf_refcount_entry *entry, u8 flags) + struct ssam_nf_refcount_entry *entry, u8 flags, bool ec) { const struct ssam_event_registry reg = entry->key.reg; const struct ssam_event_id id = entry->key.id; @@ -2232,8 +2242,9 @@ static int ssam_nf_refcount_disable_free(struct ssam_controller *ctrl, lockdep_assert_held(&nf->lock); - ssam_dbg(ctrl, "disabling event (reg: %#04x, tc: %#04x, iid: %#04x, rc: %d)\n", - reg.target_category, id.target_category, id.instance, entry->refcount); + ssam_dbg(ctrl, "%s event (reg: %#04x, tc: %#04x, iid: %#04x, rc: %d)\n", + ec ? "disabling" : "detaching", reg.target_category, id.target_category, + id.instance, entry->refcount); if (entry->flags != flags) { ssam_warn(ctrl, @@ -2242,7 +2253,7 @@ static int ssam_nf_refcount_disable_free(struct ssam_controller *ctrl, id.instance); } - if (entry->refcount == 0) { + if (ec && entry->refcount == 0) { status = ssam_ssh_event_disable(ctrl, reg, id, flags); kfree(entry); } @@ -2322,20 +2333,26 @@ int ssam_notifier_register(struct ssam_controller *ctrl, struct ssam_event_notif EXPORT_SYMBOL_GPL(ssam_notifier_register); /** - * ssam_notifier_unregister() - Unregister an event notifier. - * @ctrl: The controller the notifier has been registered on. - * @n: The event notifier to unregister. + * __ssam_notifier_unregister() - Unregister an event notifier. + * @ctrl: The controller the notifier has been registered on. + * @n: The event notifier to unregister. + * @disable: Whether to disable the corresponding event on the EC. * * Unregister an event notifier. Decrement the usage counter of the associated * SAM event if the notifier is not marked as an observer. If the usage counter - * reaches zero, the event will be disabled. + * reaches zero and ``disable`` equals ``true``, the event will be disabled. + * + * Useful for hot-removable devices, where communication may fail once the + * device has been physically removed. In that case, specifying ``disable`` as + * ``false`` avoids communication with the EC. * * Return: Returns zero on success, %-ENOENT if the given notifier block has * not been registered on the controller. If the given notifier block was the * last one associated with its specific event, returns the status of the * event-disable EC-command. */ -int ssam_notifier_unregister(struct ssam_controller *ctrl, struct ssam_event_notifier *n) +int __ssam_notifier_unregister(struct ssam_controller *ctrl, struct ssam_event_notifier *n, + bool disable) { u16 rqid = ssh_tc_to_rqid(n->event.id.target_category); struct ssam_nf_refcount_entry *entry; @@ -2373,7 +2390,7 @@ int ssam_notifier_unregister(struct ssam_controller *ctrl, struct ssam_event_not goto remove; } - status = ssam_nf_refcount_disable_free(ctrl, entry, n->event.flags); + status = ssam_nf_refcount_disable_free(ctrl, entry, n->event.flags, disable); } remove: @@ -2383,7 +2400,7 @@ int ssam_notifier_unregister(struct ssam_controller *ctrl, struct ssam_event_not return status; } -EXPORT_SYMBOL_GPL(ssam_notifier_unregister); +EXPORT_SYMBOL_GPL(__ssam_notifier_unregister); /** * ssam_controller_event_enable() - Enable the specified event. @@ -2477,7 +2494,7 @@ int ssam_controller_event_disable(struct ssam_controller *ctrl, return -ENOENT; } - status = ssam_nf_refcount_disable_free(ctrl, entry, flags); + status = ssam_nf_refcount_disable_free(ctrl, entry, flags, true); mutex_unlock(&nf->lock); return status; diff --git a/include/linux/surface_aggregator/controller.h b/include/linux/surface_aggregator/controller.h index 74bfdffaf7b0..50a2b4926c06 100644 --- a/include/linux/surface_aggregator/controller.h +++ b/include/linux/surface_aggregator/controller.h @@ -835,8 +835,28 @@ struct ssam_event_notifier { int ssam_notifier_register(struct ssam_controller *ctrl, struct ssam_event_notifier *n); -int ssam_notifier_unregister(struct ssam_controller *ctrl, - struct ssam_event_notifier *n); +int __ssam_notifier_unregister(struct ssam_controller *ctrl, + struct ssam_event_notifier *n, bool disable); + +/** + * ssam_notifier_unregister() - Unregister an event notifier. + * @ctrl: The controller the notifier has been registered on. + * @n: The event notifier to unregister. + * + * Unregister an event notifier. Decrement the usage counter of the associated + * SAM event if the notifier is not marked as an observer. If the usage counter + * reaches zero, the event will be disabled. + * + * Return: Returns zero on success, %-ENOENT if the given notifier block has + * not been registered on the controller. If the given notifier block was the + * last one associated with its specific event, returns the status of the + * event-disable EC-command. + */ +static inline int ssam_notifier_unregister(struct ssam_controller *ctrl, + struct ssam_event_notifier *n) +{ + return __ssam_notifier_unregister(ctrl, n, true); +} int ssam_controller_event_enable(struct ssam_controller *ctrl, struct ssam_event_registry reg, diff --git a/include/linux/surface_aggregator/device.h b/include/linux/surface_aggregator/device.h index 6df7c8d4e50e..c418f7f2732d 100644 --- a/include/linux/surface_aggregator/device.h +++ b/include/linux/surface_aggregator/device.h @@ -483,4 +483,70 @@ static inline void ssam_remove_clients(struct device *dev) {} sdev->uid.instance, ret); \ } + +/* -- Helpers for client-device notifiers. ---------------------------------- */ + +/** + * ssam_device_notifier_register() - Register an event notifier for the + * specified client device. + * @sdev: The device the notifier should be registered on. + * @n: The event notifier to register. + * + * Register an event notifier. Increment the usage counter of the associated + * SAM event if the notifier is not marked as an observer. If the event is not + * marked as an observer and is currently not enabled, it will be enabled + * during this call. If the notifier is marked as an observer, no attempt will + * be made at enabling any event and no reference count will be modified. + * + * Notifiers marked as observers do not need to be associated with one specific + * event, i.e. as long as no event matching is performed, only the event target + * category needs to be set. + * + * Return: Returns zero on success, %-ENOSPC if there have already been + * %INT_MAX notifiers for the event ID/type associated with the notifier block + * registered, %-ENOMEM if the corresponding event entry could not be + * allocated, %-ENODEV if the device is marked as hot-removed. If this is the + * first time that a notifier block is registered for the specific associated + * event, returns the status of the event-enable EC-command. + */ +static inline int ssam_device_notifier_register(struct ssam_device *sdev, + struct ssam_event_notifier *n) +{ + /* + * Note that this check does not provide any guarantees whatsoever as + * hot-removal could happen at any point and we can't protect against + * it. Nevertheless, if we can detect hot-removal, bail early to avoid + * communication timeouts. + */ + if (ssam_device_is_hot_removed(sdev)) + return -ENODEV; + + return ssam_notifier_register(sdev->ctrl, n); +} + +/** + * ssam_device_notifier_unregister() - Unregister an event notifier for the + * specified client device. + * @sdev: The device the notifier has been registered on. + * @n: The event notifier to unregister. + * + * Unregister an event notifier. Decrement the usage counter of the associated + * SAM event if the notifier is not marked as an observer. If the usage counter + * reaches zero, the event will be disabled. + * + * In case the device has been marked as hot-removed, the event will not be + * disabled on the EC, as in those cases any attempt at doing so may time out. + * + * Return: Returns zero on success, %-ENOENT if the given notifier block has + * not been registered on the controller. If the given notifier block was the + * last one associated with its specific event, returns the status of the + * event-disable EC-command. + */ +static inline int ssam_device_notifier_unregister(struct ssam_device *sdev, + struct ssam_event_notifier *n) +{ + return __ssam_notifier_unregister(sdev->ctrl, n, + !ssam_device_is_hot_removed(sdev)); +} + #endif /* _LINUX_SURFACE_AGGREGATOR_DEVICE_H */ -- 2.37.2 From 7fa57f0161f316e0bae747d6005df8fd32559ed6 Mon Sep 17 00:00:00 2001 From: Maximilian Luz Date: Fri, 27 May 2022 04:34:39 +0200 Subject: [PATCH] platform/surface: aggregator_registry: Use client device wrappers for notifier registration Use newly introduced client device wrapper functions for notifier registration and unregistration. Signed-off-by: Maximilian Luz Link: https://lore.kernel.org/r/20220527023447.2460025-5-luzmaximilian@gmail.com Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede Patchset: surface-sam --- drivers/platform/surface/surface_aggregator_registry.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/platform/surface/surface_aggregator_registry.c b/drivers/platform/surface/surface_aggregator_registry.c index ce2bd88feeaa..9f630e890ff7 100644 --- a/drivers/platform/surface/surface_aggregator_registry.c +++ b/drivers/platform/surface/surface_aggregator_registry.c @@ -468,7 +468,7 @@ static int ssam_base_hub_probe(struct ssam_device *sdev) ssam_device_set_drvdata(sdev, hub); - status = ssam_notifier_register(sdev->ctrl, &hub->notif); + status = ssam_device_notifier_register(sdev, &hub->notif); if (status) return status; @@ -480,7 +480,7 @@ static int ssam_base_hub_probe(struct ssam_device *sdev) return 0; err: - ssam_notifier_unregister(sdev->ctrl, &hub->notif); + ssam_device_notifier_unregister(sdev, &hub->notif); cancel_delayed_work_sync(&hub->update_work); ssam_remove_clients(&sdev->dev); return status; @@ -492,7 +492,7 @@ static void ssam_base_hub_remove(struct ssam_device *sdev) sysfs_remove_group(&sdev->dev.kobj, &ssam_base_hub_group); - ssam_notifier_unregister(sdev->ctrl, &hub->notif); + ssam_device_notifier_unregister(sdev, &hub->notif); cancel_delayed_work_sync(&hub->update_work); ssam_remove_clients(&sdev->dev); } -- 2.37.2 From c853aceabb717313981ae67332720018ab6ae9e6 Mon Sep 17 00:00:00 2001 From: Maximilian Luz Date: Fri, 27 May 2022 04:34:40 +0200 Subject: [PATCH] power/supply: surface_charger: Use client device wrappers for notifier registration Use newly introduced client device wrapper functions for notifier registration and unregistration. Signed-off-by: Maximilian Luz Acked-by: Sebastian Reichel Link: https://lore.kernel.org/r/20220527023447.2460025-6-luzmaximilian@gmail.com Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede Patchset: surface-sam --- drivers/power/supply/surface_charger.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/power/supply/surface_charger.c b/drivers/power/supply/surface_charger.c index a060c36c7766..59182d55742d 100644 --- a/drivers/power/supply/surface_charger.c +++ b/drivers/power/supply/surface_charger.c @@ -216,7 +216,7 @@ static int spwr_ac_register(struct spwr_ac_device *ac) if (IS_ERR(ac->psy)) return PTR_ERR(ac->psy); - return ssam_notifier_register(ac->sdev->ctrl, &ac->notif); + return ssam_device_notifier_register(ac->sdev, &ac->notif); } @@ -251,7 +251,7 @@ static void surface_ac_remove(struct ssam_device *sdev) { struct spwr_ac_device *ac = ssam_device_get_drvdata(sdev); - ssam_notifier_unregister(sdev->ctrl, &ac->notif); + ssam_device_notifier_unregister(sdev, &ac->notif); } static const struct spwr_psy_properties spwr_psy_props_adp1 = { -- 2.37.2 From 1a00379b51768213cf69ff8bba0fc556396b3cb7 Mon Sep 17 00:00:00 2001 From: Maximilian Luz Date: Fri, 27 May 2022 04:34:41 +0200 Subject: [PATCH] power/supply: surface_battery: Use client device wrappers for notifier registration Use newly introduced client device wrapper functions for notifier registration and unregistration. Signed-off-by: Maximilian Luz Acked-by: Sebastian Reichel Link: https://lore.kernel.org/r/20220527023447.2460025-7-luzmaximilian@gmail.com Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede Patchset: surface-sam --- drivers/power/supply/surface_battery.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/power/supply/surface_battery.c b/drivers/power/supply/surface_battery.c index 5ec2e6bb2465..540707882bb0 100644 --- a/drivers/power/supply/surface_battery.c +++ b/drivers/power/supply/surface_battery.c @@ -802,7 +802,7 @@ static int spwr_battery_register(struct spwr_battery_device *bat) if (IS_ERR(bat->psy)) return PTR_ERR(bat->psy); - return ssam_notifier_register(bat->sdev->ctrl, &bat->notif); + return ssam_device_notifier_register(bat->sdev, &bat->notif); } @@ -837,7 +837,7 @@ static void surface_battery_remove(struct ssam_device *sdev) { struct spwr_battery_device *bat = ssam_device_get_drvdata(sdev); - ssam_notifier_unregister(sdev->ctrl, &bat->notif); + ssam_device_notifier_unregister(sdev, &bat->notif); cancel_delayed_work_sync(&bat->update_work); } -- 2.37.2 From 8854eca00edf1d846266f5a70911206b95116ebf Mon Sep 17 00:00:00 2001 From: Maximilian Luz Date: Fri, 27 May 2022 04:34:42 +0200 Subject: [PATCH] HID: surface-hid: Add support for hot-removal Add support for hot-removal of SSAM HID client devices. Once a device has been hot-removed, further communication with it should be avoided as it may fail and time out. While the device will be removed as soon as we detect hot-removal, communication may still occur during teardown, especially when unregistering notifiers. While hot-removal is a surprise event that can happen at any time, try to avoid communication as much as possible once it has been detected to prevent timeouts that can slow down device removal and cause issues, e.g. when quickly re-attaching the device. Signed-off-by: Maximilian Luz Link: https://lore.kernel.org/r/20220527023447.2460025-8-luzmaximilian@gmail.com Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede Patchset: surface-sam --- drivers/hid/surface-hid/surface_hid_core.c | 38 +++++++++++++++++++++- 1 file changed, 37 insertions(+), 1 deletion(-) diff --git a/drivers/hid/surface-hid/surface_hid_core.c b/drivers/hid/surface-hid/surface_hid_core.c index e46330b2e561..87637f813de2 100644 --- a/drivers/hid/surface-hid/surface_hid_core.c +++ b/drivers/hid/surface-hid/surface_hid_core.c @@ -19,12 +19,30 @@ #include "surface_hid_core.h" +/* -- Utility functions. ---------------------------------------------------- */ + +static bool surface_hid_is_hot_removed(struct surface_hid_device *shid) +{ + /* + * Non-ssam client devices, i.e. platform client devices, cannot be + * hot-removed. + */ + if (!is_ssam_device(shid->dev)) + return false; + + return ssam_device_is_hot_removed(to_ssam_device(shid->dev)); +} + + /* -- Device descriptor access. --------------------------------------------- */ static int surface_hid_load_hid_descriptor(struct surface_hid_device *shid) { int status; + if (surface_hid_is_hot_removed(shid)) + return -ENODEV; + status = shid->ops.get_descriptor(shid, SURFACE_HID_DESC_HID, (u8 *)&shid->hid_desc, sizeof(shid->hid_desc)); if (status) @@ -61,6 +79,9 @@ static int surface_hid_load_device_attributes(struct surface_hid_device *shid) { int status; + if (surface_hid_is_hot_removed(shid)) + return -ENODEV; + status = shid->ops.get_descriptor(shid, SURFACE_HID_DESC_ATTRS, (u8 *)&shid->attrs, sizeof(shid->attrs)); if (status) @@ -88,9 +109,18 @@ static int surface_hid_start(struct hid_device *hid) static void surface_hid_stop(struct hid_device *hid) { struct surface_hid_device *shid = hid->driver_data; + bool hot_removed; + + /* + * Communication may fail for devices that have been hot-removed. This + * also includes unregistration of HID events, so we need to check this + * here. Only if the device has not been marked as hot-removed, we can + * safely disable events. + */ + hot_removed = surface_hid_is_hot_removed(shid); /* Note: This call will log errors for us, so ignore them here. */ - ssam_notifier_unregister(shid->ctrl, &shid->notif); + __ssam_notifier_unregister(shid->ctrl, &shid->notif, !hot_removed); } static int surface_hid_open(struct hid_device *hid) @@ -109,6 +139,9 @@ static int surface_hid_parse(struct hid_device *hid) u8 *buf; int status; + if (surface_hid_is_hot_removed(shid)) + return -ENODEV; + buf = kzalloc(len, GFP_KERNEL); if (!buf) return -ENOMEM; @@ -126,6 +159,9 @@ static int surface_hid_raw_request(struct hid_device *hid, unsigned char reportn { struct surface_hid_device *shid = hid->driver_data; + if (surface_hid_is_hot_removed(shid)) + return -ENODEV; + if (rtype == HID_OUTPUT_REPORT && reqtype == HID_REQ_SET_REPORT) return shid->ops.output_report(shid, reportnum, buf, len); -- 2.37.2 From aae8af660b8ddf8cf1b9d91f02fddbaf12b27618 Mon Sep 17 00:00:00 2001 From: Maximilian Luz Date: Fri, 27 May 2022 04:34:43 +0200 Subject: [PATCH] platform/surface: aggregator: Add comment for KIP subsystem category The KIP subsystem (full name unknown, abbreviation has been obtained through reverse engineering) handles detachable peripherals such as the keyboard cover on the Surface Pro X and Surface Pro 8. It is currently not entirely clear what this subsystem entails, but at the very least it provides event notifications for when the keyboard cover on the Surface Pro X and Surface Pro 8 have been detached or re-attached, as well as the state that the keyboard cover is currently in (e.g. folded-back, folded laptop-like, closed, etc.). Signed-off-by: Maximilian Luz Link: https://lore.kernel.org/r/20220527023447.2460025-9-luzmaximilian@gmail.com Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede Patchset: surface-sam --- include/linux/surface_aggregator/serial_hub.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/surface_aggregator/serial_hub.h b/include/linux/surface_aggregator/serial_hub.h index c3de43edcffa..26b95ec12733 100644 --- a/include/linux/surface_aggregator/serial_hub.h +++ b/include/linux/surface_aggregator/serial_hub.h @@ -306,7 +306,7 @@ enum ssam_ssh_tc { SSAM_SSH_TC_LPC = 0x0b, SSAM_SSH_TC_TCL = 0x0c, SSAM_SSH_TC_SFL = 0x0d, - SSAM_SSH_TC_KIP = 0x0e, + SSAM_SSH_TC_KIP = 0x0e, /* Manages detachable peripherals (Pro X/8 keyboard cover) */ SSAM_SSH_TC_EXT = 0x0f, SSAM_SSH_TC_BLD = 0x10, SSAM_SSH_TC_BAS = 0x11, /* Detachment system (Surface Book 2/3). */ -- 2.37.2 From c1180e31fe064fe3e45054cc722c3a4260c5a3db Mon Sep 17 00:00:00 2001 From: Maximilian Luz Date: Fri, 27 May 2022 04:34:44 +0200 Subject: [PATCH] platform/surface: aggregator_registry: Generify subsystem hub functionality The Surface System Aggregator Module (SSAM) has multiple subsystems that can manage detachable devices. At the moment, we only support the "base" (BAS/0x11) subsystem, which is used on the Surface Book 3 to manage devices (including keyboard, touchpad, and secondary battery) connected to the base of the device. The Surface Pro 8 has a new type-cover with keyboard and touchpad, which is managed via the KIP/0x0e subsystem. The general procedure is the same, but with slightly different events and setup. To make implementation of the KIP hub easier and prevent duplication, generify the parts of the base hub that we can use for the KIP hub (or any potential future subsystem hubs). This also switches over to use the newly introduced "hot-remove" functionality, which should prevent communication issues when devices have been detached. Lastly, also drop the undocumented and unused sysfs "state" attribute of the base hub. It has at best been useful for debugging. Signed-off-by: Maximilian Luz Link: https://lore.kernel.org/r/20220527023447.2460025-10-luzmaximilian@gmail.com Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede Patchset: surface-sam --- .../surface/surface_aggregator_registry.c | 269 ++++++++++-------- 1 file changed, 153 insertions(+), 116 deletions(-) diff --git a/drivers/platform/surface/surface_aggregator_registry.c b/drivers/platform/surface/surface_aggregator_registry.c index 9f630e890ff7..09cbeee2428b 100644 --- a/drivers/platform/surface/surface_aggregator_registry.c +++ b/drivers/platform/surface/surface_aggregator_registry.c @@ -308,30 +308,159 @@ static int ssam_hub_register_clients(struct device *parent, struct ssam_controll } -/* -- SSAM base-hub driver. ------------------------------------------------- */ +/* -- SSAM generic subsystem hub driver framework. -------------------------- */ -/* - * Some devices (especially battery) may need a bit of time to be fully usable - * after being (re-)connected. This delay has been determined via - * experimentation. - */ -#define SSAM_BASE_UPDATE_CONNECT_DELAY msecs_to_jiffies(2500) +enum ssam_hub_state { + SSAM_HUB_UNINITIALIZED, /* Only set during initialization. */ + SSAM_HUB_CONNECTED, + SSAM_HUB_DISCONNECTED, +}; -enum ssam_base_hub_state { - SSAM_BASE_HUB_UNINITIALIZED, - SSAM_BASE_HUB_CONNECTED, - SSAM_BASE_HUB_DISCONNECTED, +enum ssam_hub_flags { + SSAM_HUB_HOT_REMOVED, }; -struct ssam_base_hub { +struct ssam_hub { struct ssam_device *sdev; - enum ssam_base_hub_state state; + enum ssam_hub_state state; + unsigned long flags; + struct delayed_work update_work; + unsigned long connect_delay; struct ssam_event_notifier notif; + + int (*get_state)(struct ssam_hub *hub, enum ssam_hub_state *state); }; +static void ssam_hub_update_workfn(struct work_struct *work) +{ + struct ssam_hub *hub = container_of(work, struct ssam_hub, update_work.work); + struct fwnode_handle *node = dev_fwnode(&hub->sdev->dev); + enum ssam_hub_state state; + int status = 0; + + status = hub->get_state(hub, &state); + if (status) + return; + + /* + * There is a small possibility that hub devices were hot-removed and + * re-added before we were able to remove them here. In that case, both + * the state returned by get_state() and the state of the hub will + * equal SSAM_HUB_CONNECTED and we would bail early below, which would + * leave child devices without proper (re-)initialization and the + * hot-remove flag set. + * + * Therefore, we check whether devices have been hot-removed via an + * additional flag on the hub and, in this case, override the returned + * hub state. In case of a missed disconnect (i.e. get_state returned + * "connected"), we further need to re-schedule this work (with the + * appropriate delay) as the actual connect work submission might have + * been merged with this one. + * + * This then leads to one of two cases: Either we submit an unnecessary + * work item (which will get ignored via either the queue or the state + * checks) or, in the unlikely case that the work is actually required, + * double the normal connect delay. + */ + if (test_and_clear_bit(SSAM_HUB_HOT_REMOVED, &hub->flags)) { + if (state == SSAM_HUB_CONNECTED) + schedule_delayed_work(&hub->update_work, hub->connect_delay); + + state = SSAM_HUB_DISCONNECTED; + } + + if (hub->state == state) + return; + hub->state = state; + + if (hub->state == SSAM_HUB_CONNECTED) + status = ssam_hub_register_clients(&hub->sdev->dev, hub->sdev->ctrl, node); + else + ssam_remove_clients(&hub->sdev->dev); + + if (status) + dev_err(&hub->sdev->dev, "failed to update hub child devices: %d\n", status); +} + +static int ssam_hub_mark_hot_removed(struct device *dev, void *_data) +{ + struct ssam_device *sdev = to_ssam_device(dev); + + if (is_ssam_device(dev)) + ssam_device_mark_hot_removed(sdev); + + return 0; +} + +static void ssam_hub_update(struct ssam_hub *hub, bool connected) +{ + unsigned long delay; + + /* Mark devices as hot-removed before we remove any. */ + if (!connected) { + set_bit(SSAM_HUB_HOT_REMOVED, &hub->flags); + device_for_each_child_reverse(&hub->sdev->dev, NULL, ssam_hub_mark_hot_removed); + } + + /* + * Delay update when the base/keyboard cover is being connected to give + * devices/EC some time to set up. + */ + delay = connected ? hub->connect_delay : 0; + + schedule_delayed_work(&hub->update_work, delay); +} + +static int __maybe_unused ssam_hub_resume(struct device *dev) +{ + struct ssam_hub *hub = dev_get_drvdata(dev); + + schedule_delayed_work(&hub->update_work, 0); + return 0; +} +static SIMPLE_DEV_PM_OPS(ssam_hub_pm_ops, NULL, ssam_hub_resume); + +static int ssam_hub_setup(struct ssam_device *sdev, struct ssam_hub *hub) +{ + int status; + + hub->sdev = sdev; + hub->state = SSAM_HUB_UNINITIALIZED; + + INIT_DELAYED_WORK(&hub->update_work, ssam_hub_update_workfn); + + ssam_device_set_drvdata(sdev, hub); + + status = ssam_device_notifier_register(sdev, &hub->notif); + if (status) + return status; + + schedule_delayed_work(&hub->update_work, 0); + return 0; +} + +static void ssam_hub_remove(struct ssam_device *sdev) +{ + struct ssam_hub *hub = ssam_device_get_drvdata(sdev); + + ssam_device_notifier_unregister(sdev, &hub->notif); + cancel_delayed_work_sync(&hub->update_work); + ssam_remove_clients(&sdev->dev); +} + + +/* -- SSAM base-hub driver. ------------------------------------------------- */ + +/* + * Some devices (especially battery) may need a bit of time to be fully usable + * after being (re-)connected. This delay has been determined via + * experimentation. + */ +#define SSAM_BASE_UPDATE_CONNECT_DELAY msecs_to_jiffies(2500) + SSAM_DEFINE_SYNC_REQUEST_R(ssam_bas_query_opmode, u8, { .target_category = SSAM_SSH_TC_BAS, .target_id = 0x01, @@ -342,7 +471,7 @@ SSAM_DEFINE_SYNC_REQUEST_R(ssam_bas_query_opmode, u8, { #define SSAM_BAS_OPMODE_TABLET 0x00 #define SSAM_EVENT_BAS_CID_CONNECTION 0x0c -static int ssam_base_hub_query_state(struct ssam_base_hub *hub, enum ssam_base_hub_state *state) +static int ssam_base_hub_query_state(struct ssam_hub *hub, enum ssam_hub_state *state) { u8 opmode; int status; @@ -354,62 +483,16 @@ static int ssam_base_hub_query_state(struct ssam_base_hub *hub, enum ssam_base_h } if (opmode != SSAM_BAS_OPMODE_TABLET) - *state = SSAM_BASE_HUB_CONNECTED; + *state = SSAM_HUB_CONNECTED; else - *state = SSAM_BASE_HUB_DISCONNECTED; + *state = SSAM_HUB_DISCONNECTED; return 0; } -static ssize_t ssam_base_hub_state_show(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct ssam_base_hub *hub = dev_get_drvdata(dev); - bool connected = hub->state == SSAM_BASE_HUB_CONNECTED; - - return sysfs_emit(buf, "%d\n", connected); -} - -static struct device_attribute ssam_base_hub_attr_state = - __ATTR(state, 0444, ssam_base_hub_state_show, NULL); - -static struct attribute *ssam_base_hub_attrs[] = { - &ssam_base_hub_attr_state.attr, - NULL, -}; - -static const struct attribute_group ssam_base_hub_group = { - .attrs = ssam_base_hub_attrs, -}; - -static void ssam_base_hub_update_workfn(struct work_struct *work) -{ - struct ssam_base_hub *hub = container_of(work, struct ssam_base_hub, update_work.work); - struct fwnode_handle *node = dev_fwnode(&hub->sdev->dev); - enum ssam_base_hub_state state; - int status = 0; - - status = ssam_base_hub_query_state(hub, &state); - if (status) - return; - - if (hub->state == state) - return; - hub->state = state; - - if (hub->state == SSAM_BASE_HUB_CONNECTED) - status = ssam_hub_register_clients(&hub->sdev->dev, hub->sdev->ctrl, node); - else - ssam_remove_clients(&hub->sdev->dev); - - if (status) - dev_err(&hub->sdev->dev, "failed to update base-hub devices: %d\n", status); -} - static u32 ssam_base_hub_notif(struct ssam_event_notifier *nf, const struct ssam_event *event) { - struct ssam_base_hub *hub = container_of(nf, struct ssam_base_hub, notif); - unsigned long delay; + struct ssam_hub *hub = container_of(nf, struct ssam_hub, notif); if (event->command_id != SSAM_EVENT_BAS_CID_CONNECTION) return 0; @@ -419,13 +502,7 @@ static u32 ssam_base_hub_notif(struct ssam_event_notifier *nf, const struct ssam return 0; } - /* - * Delay update when the base is being connected to give devices/EC - * some time to set up. - */ - delay = event->data[0] ? SSAM_BASE_UPDATE_CONNECT_DELAY : 0; - - schedule_delayed_work(&hub->update_work, delay); + ssam_hub_update(hub, event->data[0]); /* * Do not return SSAM_NOTIF_HANDLED: The event should be picked up and @@ -435,27 +512,14 @@ static u32 ssam_base_hub_notif(struct ssam_event_notifier *nf, const struct ssam return 0; } -static int __maybe_unused ssam_base_hub_resume(struct device *dev) -{ - struct ssam_base_hub *hub = dev_get_drvdata(dev); - - schedule_delayed_work(&hub->update_work, 0); - return 0; -} -static SIMPLE_DEV_PM_OPS(ssam_base_hub_pm_ops, NULL, ssam_base_hub_resume); - static int ssam_base_hub_probe(struct ssam_device *sdev) { - struct ssam_base_hub *hub; - int status; + struct ssam_hub *hub; hub = devm_kzalloc(&sdev->dev, sizeof(*hub), GFP_KERNEL); if (!hub) return -ENOMEM; - hub->sdev = sdev; - hub->state = SSAM_BASE_HUB_UNINITIALIZED; - hub->notif.base.priority = INT_MAX; /* This notifier should run first. */ hub->notif.base.fn = ssam_base_hub_notif; hub->notif.event.reg = SSAM_EVENT_REGISTRY_SAM; @@ -464,37 +528,10 @@ static int ssam_base_hub_probe(struct ssam_device *sdev) hub->notif.event.mask = SSAM_EVENT_MASK_NONE; hub->notif.event.flags = SSAM_EVENT_SEQUENCED; - INIT_DELAYED_WORK(&hub->update_work, ssam_base_hub_update_workfn); - - ssam_device_set_drvdata(sdev, hub); - - status = ssam_device_notifier_register(sdev, &hub->notif); - if (status) - return status; - - status = sysfs_create_group(&sdev->dev.kobj, &ssam_base_hub_group); - if (status) - goto err; - - schedule_delayed_work(&hub->update_work, 0); - return 0; + hub->connect_delay = SSAM_BASE_UPDATE_CONNECT_DELAY; + hub->get_state = ssam_base_hub_query_state; -err: - ssam_device_notifier_unregister(sdev, &hub->notif); - cancel_delayed_work_sync(&hub->update_work); - ssam_remove_clients(&sdev->dev); - return status; -} - -static void ssam_base_hub_remove(struct ssam_device *sdev) -{ - struct ssam_base_hub *hub = ssam_device_get_drvdata(sdev); - - sysfs_remove_group(&sdev->dev.kobj, &ssam_base_hub_group); - - ssam_device_notifier_unregister(sdev, &hub->notif); - cancel_delayed_work_sync(&hub->update_work); - ssam_remove_clients(&sdev->dev); + return ssam_hub_setup(sdev, hub); } static const struct ssam_device_id ssam_base_hub_match[] = { @@ -504,12 +541,12 @@ static const struct ssam_device_id ssam_base_hub_match[] = { static struct ssam_device_driver ssam_base_hub_driver = { .probe = ssam_base_hub_probe, - .remove = ssam_base_hub_remove, + .remove = ssam_hub_remove, .match_table = ssam_base_hub_match, .driver = { .name = "surface_aggregator_base_hub", .probe_type = PROBE_PREFER_ASYNCHRONOUS, - .pm = &ssam_base_hub_pm_ops, + .pm = &ssam_hub_pm_ops, }, }; -- 2.37.2 From ae1e677f6babe2ca05a4262115f89d00f041eba7 Mon Sep 17 00:00:00 2001 From: Maximilian Luz Date: Fri, 27 May 2022 04:34:45 +0200 Subject: [PATCH] platform/surface: aggregator_registry: Change device ID for base hub Use the target category of the (base) hub as instance id in the (virtual) hub device UID. This makes association of the hub with the respective subsystem easier. Signed-off-by: Maximilian Luz Link: https://lore.kernel.org/r/20220527023447.2460025-11-luzmaximilian@gmail.com Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede Patchset: surface-sam --- drivers/platform/surface/surface_aggregator_registry.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/platform/surface/surface_aggregator_registry.c b/drivers/platform/surface/surface_aggregator_registry.c index 09cbeee2428b..b11ce87c7184 100644 --- a/drivers/platform/surface/surface_aggregator_registry.c +++ b/drivers/platform/surface/surface_aggregator_registry.c @@ -43,7 +43,7 @@ static const struct software_node ssam_node_root = { /* Base device hub (devices attached to Surface Book 3 base). */ static const struct software_node ssam_node_hub_base = { - .name = "ssam:00:00:02:00:00", + .name = "ssam:00:00:02:11:00", .parent = &ssam_node_root, }; @@ -535,7 +535,7 @@ static int ssam_base_hub_probe(struct ssam_device *sdev) } static const struct ssam_device_id ssam_base_hub_match[] = { - { SSAM_VDEV(HUB, 0x02, SSAM_ANY_IID, 0x00) }, + { SSAM_VDEV(HUB, 0x02, SSAM_SSH_TC_BAS, 0x00) }, { }, }; -- 2.37.2 From 581483b9438c2f548d2d9aa42db0b1b9886412f0 Mon Sep 17 00:00:00 2001 From: Maximilian Luz Date: Fri, 27 May 2022 04:34:46 +0200 Subject: [PATCH] platform/surface: aggregator_registry: Add KIP device hub Add a Surface System Aggregator Module (SSAM) client device hub for hot-removable devices managed via the KIP subsystem. The KIP subsystem (full name unknown, abbreviation has been obtained through reverse engineering) is a subsystem that manages hot-removable SSAM client devices. Specifically, it manages HID input devices contained in the detachable keyboard cover of the Surface Pro 8 and Surface Pro X. The KIP subsystem handles a single group of devices (e.g. all devices contained in the keyboard cover) and cannot handle devices individually. Thus we model it as a client device hub, which (hot-)removes all devices contained under it once removal of the hub (e.g. keyboard cover) has been detected and (re-)adds all devices once the physical hub device has been (re-)attached. To do this, use the previously generified SSAM subsystem hub framework. Signed-off-by: Maximilian Luz Link: https://lore.kernel.org/r/20220527023447.2460025-12-luzmaximilian@gmail.com Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede Patchset: surface-sam --- .../surface/surface_aggregator_registry.c | 103 +++++++++++++++++- 1 file changed, 101 insertions(+), 2 deletions(-) diff --git a/drivers/platform/surface/surface_aggregator_registry.c b/drivers/platform/surface/surface_aggregator_registry.c index b11ce87c7184..f15cef60630f 100644 --- a/drivers/platform/surface/surface_aggregator_registry.c +++ b/drivers/platform/surface/surface_aggregator_registry.c @@ -551,6 +551,93 @@ static struct ssam_device_driver ssam_base_hub_driver = { }; +/* -- SSAM KIP-subsystem hub driver. ---------------------------------------- */ + +/* + * Some devices may need a bit of time to be fully usable after being + * (re-)connected. This delay has been determined via experimentation. + */ +#define SSAM_KIP_UPDATE_CONNECT_DELAY msecs_to_jiffies(250) + +#define SSAM_EVENT_KIP_CID_CONNECTION 0x2c + +SSAM_DEFINE_SYNC_REQUEST_R(__ssam_kip_get_connection_state, u8, { + .target_category = SSAM_SSH_TC_KIP, + .target_id = 0x01, + .command_id = 0x2c, + .instance_id = 0x00, +}); + +static int ssam_kip_get_connection_state(struct ssam_hub *hub, enum ssam_hub_state *state) +{ + int status; + u8 connected; + + status = ssam_retry(__ssam_kip_get_connection_state, hub->sdev->ctrl, &connected); + if (status < 0) { + dev_err(&hub->sdev->dev, "failed to query KIP connection state: %d\n", status); + return status; + } + + *state = connected ? SSAM_HUB_CONNECTED : SSAM_HUB_DISCONNECTED; + return 0; +} + +static u32 ssam_kip_hub_notif(struct ssam_event_notifier *nf, const struct ssam_event *event) +{ + struct ssam_hub *hub = container_of(nf, struct ssam_hub, notif); + + if (event->command_id != SSAM_EVENT_KIP_CID_CONNECTION) + return 0; /* Return "unhandled". */ + + if (event->length < 1) { + dev_err(&hub->sdev->dev, "unexpected payload size: %u\n", event->length); + return 0; + } + + ssam_hub_update(hub, event->data[0]); + return SSAM_NOTIF_HANDLED; +} + +static int ssam_kip_hub_probe(struct ssam_device *sdev) +{ + struct ssam_hub *hub; + + hub = devm_kzalloc(&sdev->dev, sizeof(*hub), GFP_KERNEL); + if (!hub) + return -ENOMEM; + + hub->notif.base.priority = INT_MAX; /* This notifier should run first. */ + hub->notif.base.fn = ssam_kip_hub_notif; + hub->notif.event.reg = SSAM_EVENT_REGISTRY_SAM; + hub->notif.event.id.target_category = SSAM_SSH_TC_KIP, + hub->notif.event.id.instance = 0, + hub->notif.event.mask = SSAM_EVENT_MASK_TARGET; + hub->notif.event.flags = SSAM_EVENT_SEQUENCED; + + hub->connect_delay = SSAM_KIP_UPDATE_CONNECT_DELAY; + hub->get_state = ssam_kip_get_connection_state; + + return ssam_hub_setup(sdev, hub); +} + +static const struct ssam_device_id ssam_kip_hub_match[] = { + { SSAM_VDEV(HUB, 0x01, SSAM_SSH_TC_KIP, 0x00) }, + { }, +}; + +static struct ssam_device_driver ssam_kip_hub_driver = { + .probe = ssam_kip_hub_probe, + .remove = ssam_hub_remove, + .match_table = ssam_kip_hub_match, + .driver = { + .name = "surface_kip_hub", + .probe_type = PROBE_PREFER_ASYNCHRONOUS, + .pm = &ssam_hub_pm_ops, + }, +}; + + /* -- SSAM platform/meta-hub driver. ---------------------------------------- */ static const struct acpi_device_id ssam_platform_hub_match[] = { @@ -673,18 +760,30 @@ static int __init ssam_device_hub_init(void) status = platform_driver_register(&ssam_platform_hub_driver); if (status) - return status; + goto err_platform; status = ssam_device_driver_register(&ssam_base_hub_driver); if (status) - platform_driver_unregister(&ssam_platform_hub_driver); + goto err_base; + + status = ssam_device_driver_register(&ssam_kip_hub_driver); + if (status) + goto err_kip; + return 0; + +err_kip: + ssam_device_driver_unregister(&ssam_base_hub_driver); +err_base: + platform_driver_unregister(&ssam_platform_hub_driver); +err_platform: return status; } module_init(ssam_device_hub_init); static void __exit ssam_device_hub_exit(void) { + ssam_device_driver_unregister(&ssam_kip_hub_driver); ssam_device_driver_unregister(&ssam_base_hub_driver); platform_driver_unregister(&ssam_platform_hub_driver); } -- 2.37.2 From 6113e8deb4c9d72a7fb809cd17c05b6db18854c0 Mon Sep 17 00:00:00 2001 From: Maximilian Luz Date: Fri, 27 May 2022 04:34:47 +0200 Subject: [PATCH] platform/surface: aggregator_registry: Add support for keyboard cover on Surface Pro 8 Add support for the detachable keyboard cover on the Surface Pro 8. The keyboard cover on the Surface Pro 8 is, unlike the keyboard covers of earlier Surface Pro generations, handled via the Surface System Aggregator Module (SSAM). The keyboard and touchpad (as well as other HID input devices) of this cover are standard SSAM HID client devices (just like keyboard and touchpad on e.g. the Surface Laptop 3 and 4), however, some care needs to be taken as they can be physically detached (similarly to the Surface Book 3). Specifically, the respective SSAM client devices need to be removed when the keyboard cover has been detached and (re-)initialized when the keyboard cover has been (re-)attached. On the Surface Pro 8, detachment of the keyboard cover (and by extension its devices) is managed via the KIP subsystem. Therefore, said devices need to be registered under the KIP device hub, which in turn will remove and re-create/re-initialize those devices as needed. Signed-off-by: Maximilian Luz Link: https://lore.kernel.org/r/20220527023447.2460025-13-luzmaximilian@gmail.com Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede Patchset: surface-sam --- .../surface/surface_aggregator_registry.c | 37 ++++++++++++++++++- 1 file changed, 36 insertions(+), 1 deletion(-) diff --git a/drivers/platform/surface/surface_aggregator_registry.c b/drivers/platform/surface/surface_aggregator_registry.c index f15cef60630f..bf3303f1aa71 100644 --- a/drivers/platform/surface/surface_aggregator_registry.c +++ b/drivers/platform/surface/surface_aggregator_registry.c @@ -41,6 +41,12 @@ static const struct software_node ssam_node_root = { .name = "ssam_platform_hub", }; +/* KIP device hub (connects keyboard cover devices on Surface Pro 8). */ +static const struct software_node ssam_node_hub_kip = { + .name = "ssam:00:00:01:0e:00", + .parent = &ssam_node_root, +}; + /* Base device hub (devices attached to Surface Book 3 base). */ static const struct software_node ssam_node_hub_base = { .name = "ssam:00:00:02:11:00", @@ -155,6 +161,30 @@ static const struct software_node ssam_node_hid_base_iid6 = { .parent = &ssam_node_hub_base, }; +/* HID keyboard (KIP hub). */ +static const struct software_node ssam_node_hid_kip_keyboard = { + .name = "ssam:01:15:02:01:00", + .parent = &ssam_node_hub_kip, +}; + +/* HID pen stash (KIP hub; pen taken / stashed away evens). */ +static const struct software_node ssam_node_hid_kip_penstash = { + .name = "ssam:01:15:02:02:00", + .parent = &ssam_node_hub_kip, +}; + +/* HID touchpad (KIP hub). */ +static const struct software_node ssam_node_hid_kip_touchpad = { + .name = "ssam:01:15:02:03:00", + .parent = &ssam_node_hub_kip, +}; + +/* HID device instance 5 (KIP hub, unknown HID device). */ +static const struct software_node ssam_node_hid_kip_iid5 = { + .name = "ssam:01:15:02:05:00", + .parent = &ssam_node_hub_kip, +}; + /* * Devices for 5th- and 6th-generations models: * - Surface Book 2, @@ -230,10 +260,15 @@ static const struct software_node *ssam_node_group_sp7[] = { static const struct software_node *ssam_node_group_sp8[] = { &ssam_node_root, + &ssam_node_hub_kip, &ssam_node_bat_ac, &ssam_node_bat_main, &ssam_node_tmp_pprof, - /* TODO: Add support for keyboard cover. */ + &ssam_node_hid_kip_keyboard, + &ssam_node_hid_kip_penstash, + &ssam_node_hid_kip_touchpad, + &ssam_node_hid_kip_iid5, + /* TODO: Add support for tablet mode switch. */ NULL, }; -- 2.37.2 From ffb7b4cfe0e1ae0f3d8de827e9b699abd8b43352 Mon Sep 17 00:00:00 2001 From: Tetsuo Handa Date: Fri, 10 Jun 2022 14:41:58 +0900 Subject: [PATCH] platform/surface: avoid flush_scheduled_work() usage Use local wq in order to avoid flush_scheduled_work() usage. Signed-off-by: Tetsuo Handa Reviewed-by: Maximilian Luz Tested-by: Maximilian Luz Link: https://lore.kernel.org/r/63ec2d45-c67c-1134-f6d3-490c8ba67a01@I-love.SAKURA.ne.jp Signed-off-by: Hans de Goede Patchset: surface-sam --- .../platform/surface/surface_acpi_notify.c | 27 ++++++++++++++++--- 1 file changed, 24 insertions(+), 3 deletions(-) diff --git a/drivers/platform/surface/surface_acpi_notify.c b/drivers/platform/surface/surface_acpi_notify.c index 7b758f8cc137..c0e12f0b9b79 100644 --- a/drivers/platform/surface/surface_acpi_notify.c +++ b/drivers/platform/surface/surface_acpi_notify.c @@ -37,6 +37,7 @@ struct san_data { #define to_san_data(ptr, member) \ container_of(ptr, struct san_data, member) +static struct workqueue_struct *san_wq; /* -- dGPU notifier interface. ---------------------------------------------- */ @@ -356,7 +357,7 @@ static u32 san_evt_bat_nf(struct ssam_event_notifier *nf, memcpy(&work->event, event, sizeof(struct ssam_event) + event->length); - schedule_delayed_work(&work->work, delay); + queue_delayed_work(san_wq, &work->work, delay); return SSAM_NOTIF_HANDLED; } @@ -861,7 +862,7 @@ static int san_remove(struct platform_device *pdev) * We have unregistered our event sources. Now we need to ensure that * all delayed works they may have spawned are run to completion. */ - flush_scheduled_work(); + flush_workqueue(san_wq); return 0; } @@ -881,7 +882,27 @@ static struct platform_driver surface_acpi_notify = { .probe_type = PROBE_PREFER_ASYNCHRONOUS, }, }; -module_platform_driver(surface_acpi_notify); + +static int __init san_init(void) +{ + int ret; + + san_wq = alloc_workqueue("san_wq", 0, 0); + if (!san_wq) + return -ENOMEM; + ret = platform_driver_register(&surface_acpi_notify); + if (ret) + destroy_workqueue(san_wq); + return ret; +} +module_init(san_init); + +static void __exit san_exit(void) +{ + platform_driver_unregister(&surface_acpi_notify); + destroy_workqueue(san_wq); +} +module_exit(san_exit); MODULE_AUTHOR("Maximilian Luz "); MODULE_DESCRIPTION("Surface ACPI Notify driver for Surface System Aggregator Module"); -- 2.37.2 From c61fe02172d405255e1ee652d192ff2362219790 Mon Sep 17 00:00:00 2001 From: Maximilian Luz Date: Tue, 14 Jun 2022 21:41:17 +0200 Subject: [PATCH] platform/surface: aggregator: Reserve more event- and target-categories With the introduction of the Surface Laptop Studio, more event- and target categories have been added. Therefore, increase the number of reserved events and extend the enum of know target categories to accommodate this. Signed-off-by: Maximilian Luz Link: https://lore.kernel.org/r/20220614194117.4118897-1-luzmaximilian@gmail.com Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede Patchset: surface-sam --- drivers/platform/surface/aggregator/trace.h | 80 +++++++++++-------- include/linux/surface_aggregator/serial_hub.h | 75 +++++++++-------- 2 files changed, 85 insertions(+), 70 deletions(-) diff --git a/drivers/platform/surface/aggregator/trace.h b/drivers/platform/surface/aggregator/trace.h index de64cf169060..cc9e73fbc18e 100644 --- a/drivers/platform/surface/aggregator/trace.h +++ b/drivers/platform/surface/aggregator/trace.h @@ -76,7 +76,7 @@ TRACE_DEFINE_ENUM(SSAM_SSH_TC_HID); TRACE_DEFINE_ENUM(SSAM_SSH_TC_TCH); TRACE_DEFINE_ENUM(SSAM_SSH_TC_BKL); TRACE_DEFINE_ENUM(SSAM_SSH_TC_TAM); -TRACE_DEFINE_ENUM(SSAM_SSH_TC_ACC); +TRACE_DEFINE_ENUM(SSAM_SSH_TC_ACC0); TRACE_DEFINE_ENUM(SSAM_SSH_TC_UFI); TRACE_DEFINE_ENUM(SSAM_SSH_TC_USC); TRACE_DEFINE_ENUM(SSAM_SSH_TC_PEN); @@ -85,6 +85,11 @@ TRACE_DEFINE_ENUM(SSAM_SSH_TC_AUD); TRACE_DEFINE_ENUM(SSAM_SSH_TC_SMC); TRACE_DEFINE_ENUM(SSAM_SSH_TC_KPD); TRACE_DEFINE_ENUM(SSAM_SSH_TC_REG); +TRACE_DEFINE_ENUM(SSAM_SSH_TC_SPT); +TRACE_DEFINE_ENUM(SSAM_SSH_TC_SYS); +TRACE_DEFINE_ENUM(SSAM_SSH_TC_ACC1); +TRACE_DEFINE_ENUM(SSAM_SSH_TC_SHB); +TRACE_DEFINE_ENUM(SSAM_SSH_TC_POS); #define SSAM_PTR_UID_LEN 9 #define SSAM_U8_FIELD_NOT_APPLICABLE ((u16)-1) @@ -229,40 +234,45 @@ static inline u32 ssam_trace_get_request_tc(const struct ssh_packet *p) #define ssam_show_ssh_tc(rqid) \ __print_symbolic(rqid, \ - { SSAM_SSH_TC_NOT_APPLICABLE, "N/A" }, \ - { SSAM_SSH_TC_SAM, "SAM" }, \ - { SSAM_SSH_TC_BAT, "BAT" }, \ - { SSAM_SSH_TC_TMP, "TMP" }, \ - { SSAM_SSH_TC_PMC, "PMC" }, \ - { SSAM_SSH_TC_FAN, "FAN" }, \ - { SSAM_SSH_TC_PoM, "PoM" }, \ - { SSAM_SSH_TC_DBG, "DBG" }, \ - { SSAM_SSH_TC_KBD, "KBD" }, \ - { SSAM_SSH_TC_FWU, "FWU" }, \ - { SSAM_SSH_TC_UNI, "UNI" }, \ - { SSAM_SSH_TC_LPC, "LPC" }, \ - { SSAM_SSH_TC_TCL, "TCL" }, \ - { SSAM_SSH_TC_SFL, "SFL" }, \ - { SSAM_SSH_TC_KIP, "KIP" }, \ - { SSAM_SSH_TC_EXT, "EXT" }, \ - { SSAM_SSH_TC_BLD, "BLD" }, \ - { SSAM_SSH_TC_BAS, "BAS" }, \ - { SSAM_SSH_TC_SEN, "SEN" }, \ - { SSAM_SSH_TC_SRQ, "SRQ" }, \ - { SSAM_SSH_TC_MCU, "MCU" }, \ - { SSAM_SSH_TC_HID, "HID" }, \ - { SSAM_SSH_TC_TCH, "TCH" }, \ - { SSAM_SSH_TC_BKL, "BKL" }, \ - { SSAM_SSH_TC_TAM, "TAM" }, \ - { SSAM_SSH_TC_ACC, "ACC" }, \ - { SSAM_SSH_TC_UFI, "UFI" }, \ - { SSAM_SSH_TC_USC, "USC" }, \ - { SSAM_SSH_TC_PEN, "PEN" }, \ - { SSAM_SSH_TC_VID, "VID" }, \ - { SSAM_SSH_TC_AUD, "AUD" }, \ - { SSAM_SSH_TC_SMC, "SMC" }, \ - { SSAM_SSH_TC_KPD, "KPD" }, \ - { SSAM_SSH_TC_REG, "REG" } \ + { SSAM_SSH_TC_NOT_APPLICABLE, "N/A" }, \ + { SSAM_SSH_TC_SAM, "SAM" }, \ + { SSAM_SSH_TC_BAT, "BAT" }, \ + { SSAM_SSH_TC_TMP, "TMP" }, \ + { SSAM_SSH_TC_PMC, "PMC" }, \ + { SSAM_SSH_TC_FAN, "FAN" }, \ + { SSAM_SSH_TC_PoM, "PoM" }, \ + { SSAM_SSH_TC_DBG, "DBG" }, \ + { SSAM_SSH_TC_KBD, "KBD" }, \ + { SSAM_SSH_TC_FWU, "FWU" }, \ + { SSAM_SSH_TC_UNI, "UNI" }, \ + { SSAM_SSH_TC_LPC, "LPC" }, \ + { SSAM_SSH_TC_TCL, "TCL" }, \ + { SSAM_SSH_TC_SFL, "SFL" }, \ + { SSAM_SSH_TC_KIP, "KIP" }, \ + { SSAM_SSH_TC_EXT, "EXT" }, \ + { SSAM_SSH_TC_BLD, "BLD" }, \ + { SSAM_SSH_TC_BAS, "BAS" }, \ + { SSAM_SSH_TC_SEN, "SEN" }, \ + { SSAM_SSH_TC_SRQ, "SRQ" }, \ + { SSAM_SSH_TC_MCU, "MCU" }, \ + { SSAM_SSH_TC_HID, "HID" }, \ + { SSAM_SSH_TC_TCH, "TCH" }, \ + { SSAM_SSH_TC_BKL, "BKL" }, \ + { SSAM_SSH_TC_TAM, "TAM" }, \ + { SSAM_SSH_TC_ACC0, "ACC0" }, \ + { SSAM_SSH_TC_UFI, "UFI" }, \ + { SSAM_SSH_TC_USC, "USC" }, \ + { SSAM_SSH_TC_PEN, "PEN" }, \ + { SSAM_SSH_TC_VID, "VID" }, \ + { SSAM_SSH_TC_AUD, "AUD" }, \ + { SSAM_SSH_TC_SMC, "SMC" }, \ + { SSAM_SSH_TC_KPD, "KPD" }, \ + { SSAM_SSH_TC_REG, "REG" }, \ + { SSAM_SSH_TC_SPT, "SPT" }, \ + { SSAM_SSH_TC_SYS, "SYS" }, \ + { SSAM_SSH_TC_ACC1, "ACC1" }, \ + { SSAM_SSH_TC_SHB, "SMB" }, \ + { SSAM_SSH_TC_POS, "POS" } \ ) DECLARE_EVENT_CLASS(ssam_frame_class, diff --git a/include/linux/surface_aggregator/serial_hub.h b/include/linux/surface_aggregator/serial_hub.h index 26b95ec12733..45501b6e54e8 100644 --- a/include/linux/surface_aggregator/serial_hub.h +++ b/include/linux/surface_aggregator/serial_hub.h @@ -201,7 +201,7 @@ static inline u16 ssh_crc(const u8 *buf, size_t len) * exception of zero, which is not an event ID. Thus, this is also the * absolute maximum number of event handlers that can be registered. */ -#define SSH_NUM_EVENTS 34 +#define SSH_NUM_EVENTS 38 /* * SSH_NUM_TARGETS - The number of communication targets used in the protocol. @@ -292,40 +292,45 @@ struct ssam_span { * Windows driver. */ enum ssam_ssh_tc { - /* Category 0x00 is invalid for EC use. */ - SSAM_SSH_TC_SAM = 0x01, /* Generic system functionality, real-time clock. */ - SSAM_SSH_TC_BAT = 0x02, /* Battery/power subsystem. */ - SSAM_SSH_TC_TMP = 0x03, /* Thermal subsystem. */ - SSAM_SSH_TC_PMC = 0x04, - SSAM_SSH_TC_FAN = 0x05, - SSAM_SSH_TC_PoM = 0x06, - SSAM_SSH_TC_DBG = 0x07, - SSAM_SSH_TC_KBD = 0x08, /* Legacy keyboard (Laptop 1/2). */ - SSAM_SSH_TC_FWU = 0x09, - SSAM_SSH_TC_UNI = 0x0a, - SSAM_SSH_TC_LPC = 0x0b, - SSAM_SSH_TC_TCL = 0x0c, - SSAM_SSH_TC_SFL = 0x0d, - SSAM_SSH_TC_KIP = 0x0e, /* Manages detachable peripherals (Pro X/8 keyboard cover) */ - SSAM_SSH_TC_EXT = 0x0f, - SSAM_SSH_TC_BLD = 0x10, - SSAM_SSH_TC_BAS = 0x11, /* Detachment system (Surface Book 2/3). */ - SSAM_SSH_TC_SEN = 0x12, - SSAM_SSH_TC_SRQ = 0x13, - SSAM_SSH_TC_MCU = 0x14, - SSAM_SSH_TC_HID = 0x15, /* Generic HID input subsystem. */ - SSAM_SSH_TC_TCH = 0x16, - SSAM_SSH_TC_BKL = 0x17, - SSAM_SSH_TC_TAM = 0x18, - SSAM_SSH_TC_ACC = 0x19, - SSAM_SSH_TC_UFI = 0x1a, - SSAM_SSH_TC_USC = 0x1b, - SSAM_SSH_TC_PEN = 0x1c, - SSAM_SSH_TC_VID = 0x1d, - SSAM_SSH_TC_AUD = 0x1e, - SSAM_SSH_TC_SMC = 0x1f, - SSAM_SSH_TC_KPD = 0x20, - SSAM_SSH_TC_REG = 0x21, /* Extended event registry. */ + /* Category 0x00 is invalid for EC use. */ + SSAM_SSH_TC_SAM = 0x01, /* Generic system functionality, real-time clock. */ + SSAM_SSH_TC_BAT = 0x02, /* Battery/power subsystem. */ + SSAM_SSH_TC_TMP = 0x03, /* Thermal subsystem. */ + SSAM_SSH_TC_PMC = 0x04, + SSAM_SSH_TC_FAN = 0x05, + SSAM_SSH_TC_PoM = 0x06, + SSAM_SSH_TC_DBG = 0x07, + SSAM_SSH_TC_KBD = 0x08, /* Legacy keyboard (Laptop 1/2). */ + SSAM_SSH_TC_FWU = 0x09, + SSAM_SSH_TC_UNI = 0x0a, + SSAM_SSH_TC_LPC = 0x0b, + SSAM_SSH_TC_TCL = 0x0c, + SSAM_SSH_TC_SFL = 0x0d, + SSAM_SSH_TC_KIP = 0x0e, /* Manages detachable peripherals (Pro X/8 keyboard cover) */ + SSAM_SSH_TC_EXT = 0x0f, + SSAM_SSH_TC_BLD = 0x10, + SSAM_SSH_TC_BAS = 0x11, /* Detachment system (Surface Book 2/3). */ + SSAM_SSH_TC_SEN = 0x12, + SSAM_SSH_TC_SRQ = 0x13, + SSAM_SSH_TC_MCU = 0x14, + SSAM_SSH_TC_HID = 0x15, /* Generic HID input subsystem. */ + SSAM_SSH_TC_TCH = 0x16, + SSAM_SSH_TC_BKL = 0x17, + SSAM_SSH_TC_TAM = 0x18, + SSAM_SSH_TC_ACC0 = 0x19, + SSAM_SSH_TC_UFI = 0x1a, + SSAM_SSH_TC_USC = 0x1b, + SSAM_SSH_TC_PEN = 0x1c, + SSAM_SSH_TC_VID = 0x1d, + SSAM_SSH_TC_AUD = 0x1e, + SSAM_SSH_TC_SMC = 0x1f, + SSAM_SSH_TC_KPD = 0x20, + SSAM_SSH_TC_REG = 0x21, /* Extended event registry. */ + SSAM_SSH_TC_SPT = 0x22, + SSAM_SSH_TC_SYS = 0x23, + SSAM_SSH_TC_ACC1 = 0x24, + SSAM_SSH_TC_SHB = 0x25, + SSAM_SSH_TC_POS = 0x26, /* For obtaining Laptop Studio screen position. */ }; -- 2.37.2 From f7d73074c25fe126d1f92aab16613f333dcfb443 Mon Sep 17 00:00:00 2001 From: Maximilian Luz Date: Fri, 24 Jun 2022 20:36:39 +0200 Subject: [PATCH] platform/surface: aggregator: Add helper macros for requests with argument and return value Add helper macros for synchronous stack-allocated Surface Aggregator request with both argument and return value, similar to the current argument-only and return-value-only ones. Signed-off-by: Maximilian Luz Link: https://lore.kernel.org/r/20220624183642.910893-2-luzmaximilian@gmail.com Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede Patchset: surface-sam --- include/linux/surface_aggregator/controller.h | 125 ++++++++++++++++++ include/linux/surface_aggregator/device.h | 36 +++++ 2 files changed, 161 insertions(+) diff --git a/include/linux/surface_aggregator/controller.h b/include/linux/surface_aggregator/controller.h index 50a2b4926c06..d11a1c6e3186 100644 --- a/include/linux/surface_aggregator/controller.h +++ b/include/linux/surface_aggregator/controller.h @@ -469,6 +469,67 @@ struct ssam_request_spec_md { return 0; \ } +/** + * SSAM_DEFINE_SYNC_REQUEST_WR() - Define synchronous SAM request function with + * both argument and return value. + * @name: Name of the generated function. + * @atype: Type of the request's argument. + * @rtype: Type of the request's return value. + * @spec: Specification (&struct ssam_request_spec) defining the request. + * + * Defines a function executing the synchronous SAM request specified by @spec, + * with the request taking an argument of type @atype and having a return value + * of type @rtype. The generated function takes care of setting up the request + * and response structs, buffer allocation, as well as execution of the request + * itself, returning once the request has been fully completed. The required + * transport buffer will be allocated on the stack. + * + * The generated function is defined as ``static int name(struct + * ssam_controller *ctrl, const atype *arg, rtype *ret)``, returning the status + * of the request, which is zero on success and negative on failure. The + * ``ctrl`` parameter is the controller via which the request is sent. The + * request argument is specified via the ``arg`` pointer. The request's return + * value is written to the memory pointed to by the ``ret`` parameter. + * + * Refer to ssam_request_sync_onstack() for more details on the behavior of + * the generated function. + */ +#define SSAM_DEFINE_SYNC_REQUEST_WR(name, atype, rtype, spec...) \ + static int name(struct ssam_controller *ctrl, const atype *arg, rtype *ret) \ + { \ + struct ssam_request_spec s = (struct ssam_request_spec)spec; \ + struct ssam_request rqst; \ + struct ssam_response rsp; \ + int status; \ + \ + rqst.target_category = s.target_category; \ + rqst.target_id = s.target_id; \ + rqst.command_id = s.command_id; \ + rqst.instance_id = s.instance_id; \ + rqst.flags = s.flags | SSAM_REQUEST_HAS_RESPONSE; \ + rqst.length = sizeof(atype); \ + rqst.payload = (u8 *)arg; \ + \ + rsp.capacity = sizeof(rtype); \ + rsp.length = 0; \ + rsp.pointer = (u8 *)ret; \ + \ + status = ssam_request_sync_onstack(ctrl, &rqst, &rsp, sizeof(atype)); \ + if (status) \ + return status; \ + \ + if (rsp.length != sizeof(rtype)) { \ + struct device *dev = ssam_controller_device(ctrl); \ + dev_err(dev, \ + "rqst: invalid response length, expected %zu, got %zu (tc: %#04x, cid: %#04x)", \ + sizeof(rtype), rsp.length, rqst.target_category,\ + rqst.command_id); \ + return -EIO; \ + } \ + \ + return 0; \ + } + /** * SSAM_DEFINE_SYNC_REQUEST_MD_N() - Define synchronous multi-device SAM * request function with neither argument nor return value. @@ -613,6 +674,70 @@ struct ssam_request_spec_md { return 0; \ } +/** + * SSAM_DEFINE_SYNC_REQUEST_MD_WR() - Define synchronous multi-device SAM + * request function with both argument and return value. + * @name: Name of the generated function. + * @atype: Type of the request's argument. + * @rtype: Type of the request's return value. + * @spec: Specification (&struct ssam_request_spec_md) defining the request. + * + * Defines a function executing the synchronous SAM request specified by @spec, + * with the request taking an argument of type @atype and having a return value + * of type @rtype. Device specifying parameters are not hard-coded, but instead + * must be provided to the function. The generated function takes care of + * setting up the request and response structs, buffer allocation, as well as + * execution of the request itself, returning once the request has been fully + * completed. The required transport buffer will be allocated on the stack. + * + * The generated function is defined as ``static int name(struct + * ssam_controller *ctrl, u8 tid, u8 iid, const atype *arg, rtype *ret)``, + * returning the status of the request, which is zero on success and negative + * on failure. The ``ctrl`` parameter is the controller via which the request + * is sent, ``tid`` the target ID for the request, and ``iid`` the instance ID. + * The request argument is specified via the ``arg`` pointer. The request's + * return value is written to the memory pointed to by the ``ret`` parameter. + * + * Refer to ssam_request_sync_onstack() for more details on the behavior of + * the generated function. + */ +#define SSAM_DEFINE_SYNC_REQUEST_MD_WR(name, atype, rtype, spec...) \ + static int name(struct ssam_controller *ctrl, u8 tid, u8 iid, \ + const atype *arg, rtype *ret) \ + { \ + struct ssam_request_spec_md s = (struct ssam_request_spec_md)spec; \ + struct ssam_request rqst; \ + struct ssam_response rsp; \ + int status; \ + \ + rqst.target_category = s.target_category; \ + rqst.target_id = tid; \ + rqst.command_id = s.command_id; \ + rqst.instance_id = iid; \ + rqst.flags = s.flags | SSAM_REQUEST_HAS_RESPONSE; \ + rqst.length = sizeof(atype); \ + rqst.payload = (u8 *)arg; \ + \ + rsp.capacity = sizeof(rtype); \ + rsp.length = 0; \ + rsp.pointer = (u8 *)ret; \ + \ + status = ssam_request_sync_onstack(ctrl, &rqst, &rsp, sizeof(atype)); \ + if (status) \ + return status; \ + \ + if (rsp.length != sizeof(rtype)) { \ + struct device *dev = ssam_controller_device(ctrl); \ + dev_err(dev, \ + "rqst: invalid response length, expected %zu, got %zu (tc: %#04x, cid: %#04x)", \ + sizeof(rtype), rsp.length, rqst.target_category,\ + rqst.command_id); \ + return -EIO; \ + } \ + \ + return 0; \ + } + /* -- Event notifier/callbacks. --------------------------------------------- */ diff --git a/include/linux/surface_aggregator/device.h b/include/linux/surface_aggregator/device.h index c418f7f2732d..6cf7e80312d5 100644 --- a/include/linux/surface_aggregator/device.h +++ b/include/linux/surface_aggregator/device.h @@ -483,6 +483,42 @@ static inline void ssam_remove_clients(struct device *dev) {} sdev->uid.instance, ret); \ } +/** + * SSAM_DEFINE_SYNC_REQUEST_CL_WR() - Define synchronous client-device SAM + * request function with argument and return value. + * @name: Name of the generated function. + * @atype: Type of the request's argument. + * @rtype: Type of the request's return value. + * @spec: Specification (&struct ssam_request_spec_md) defining the request. + * + * Defines a function executing the synchronous SAM request specified by @spec, + * with the request taking an argument of type @atype and having a return value + * of type @rtype. Device specifying parameters are not hard-coded, but instead + * are provided via the client device, specifically its UID, supplied when + * calling this function. The generated function takes care of setting up the + * request struct, buffer allocation, as well as execution of the request + * itself, returning once the request has been fully completed. The required + * transport buffer will be allocated on the stack. + * + * The generated function is defined as ``static int name(struct ssam_device + * *sdev, const atype *arg, rtype *ret)``, returning the status of the request, + * which is zero on success and negative on failure. The ``sdev`` parameter + * specifies both the target device of the request and by association the + * controller via which the request is sent. The request's argument is + * specified via the ``arg`` pointer. The request's return value is written to + * the memory pointed to by the ``ret`` parameter. + * + * Refer to ssam_request_sync_onstack() for more details on the behavior of + * the generated function. + */ +#define SSAM_DEFINE_SYNC_REQUEST_CL_WR(name, atype, rtype, spec...) \ + SSAM_DEFINE_SYNC_REQUEST_MD_WR(__raw_##name, atype, rtype, spec) \ + static int name(struct ssam_device *sdev, const atype *arg, rtype *ret) \ + { \ + return __raw_##name(sdev->ctrl, sdev->uid.target, \ + sdev->uid.instance, arg, ret); \ + } + /* -- Helpers for client-device notifiers. ---------------------------------- */ -- 2.37.2 From 18696529f9b2326722e395ba0219b70c6b63f14f Mon Sep 17 00:00:00 2001 From: Maximilian Luz Date: Fri, 24 Jun 2022 20:36:40 +0200 Subject: [PATCH] platform/surface: Add KIP/POS tablet-mode switch driver MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add a driver providing a tablet-mode switch input device for Microsoft Surface devices using the Surface Aggregator KIP subsystem (to manage detachable peripherals) or POS subsystem (to obtain device posture information). The KIP (full name unknown, abbreviation found through reverse engineering) subsystem is used on the Surface Pro 8 and Surface Pro X to manage the keyboard cover. Among other things, it provides information on the positioning (posture) of the cover (closed, laptop-style, detached, folded-back, ...), which can be used to implement an input device providing the SW_TABLET_MODE event. Similarly, the POS (posture information) subsystem provides such information on the Surface Laptop Studio, with the difference being that the keyboard is not detachable. As implementing the tablet-mode switch for both subsystems is largely similar, the driver proposed in this commit, in large, acts as a generic tablet mode switch driver framework for the Surface Aggregator Module. Specific implementations using this framework are provided for the KIP and POS subsystems, adding tablet-mode switch support to the aforementioned devices. A few more notes on the Surface Laptop Studio: A peculiarity of the Surface Laptop Studio is its "slate/tent" mode (symbolized: user> _/\). In this mode, the screen covers the keyboard but leaves the touchpad exposed. This is essentially a mode in-between tablet and laptop, and it is debatable whether tablet-mode should be enabled in this mode. We therefore let the user decide this via a module parameter. In particular, tablet-mode may bring up the on-screen touch keyboard more easily, which would be desirable in this mode. However, some user-space software currently also decides to disable keyboard and, more importantly, touchpad input, while the touchpad is still accessible in the "slate/tent" mode. Furthermore, this mode shares its identifier with "slate/flipped" mode where the screen is flipped 180° and the keyboard points away from the user (symbolized: user> /_). In this mode we would like to enable auto-rotation, something that user-space software may only do when tablet-mode is enabled. We therefore default to the slate-mode enabling the tablet-mode switch. Signed-off-by: Maximilian Luz Link: https://lore.kernel.org/r/20220624183642.910893-3-luzmaximilian@gmail.com Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede Patchset: surface-sam --- .../sysfs-bus-surface_aggregator-tabletsw | 57 ++ MAINTAINERS | 6 + drivers/platform/surface/Kconfig | 23 + drivers/platform/surface/Makefile | 1 + .../surface/surface_aggregator_tabletsw.c | 533 ++++++++++++++++++ 5 files changed, 620 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-bus-surface_aggregator-tabletsw create mode 100644 drivers/platform/surface/surface_aggregator_tabletsw.c diff --git a/Documentation/ABI/testing/sysfs-bus-surface_aggregator-tabletsw b/Documentation/ABI/testing/sysfs-bus-surface_aggregator-tabletsw new file mode 100644 index 000000000000..74cd9d754e60 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-surface_aggregator-tabletsw @@ -0,0 +1,57 @@ +What: /sys/bus/surface_aggregator/devices/01:0e:01:00:01/state +Date: July 2022 +KernelVersion: 5.20 +Contact: Maximilian Luz +Description: + This attribute returns a string with the current type-cover + or device posture, as indicated by the embedded controller. + Currently returned posture states are: + + - "disconnected": The type-cover has been disconnected. + + - "closed": The type-cover has been folded closed and lies on + top of the display. + + - "laptop": The type-cover is open and in laptop-mode, i.e., + ready for normal use. + + - "folded-canvas": The type-cover has been folded back + part-ways, but does not lie flush with the back side of the + device. In general, this means that the kick-stand is used + and extended atop of the cover. + + - "folded-back": The type cover has been fully folded back and + lies flush with the back side of the device. + + - "": The current state is unknown to the driver, for + example due to newer as-of-yet unsupported hardware. + + New states may be introduced with new hardware. Users therefore + must not rely on this list of states being exhaustive and + gracefully handle unknown states. + +What: /sys/bus/surface_aggregator/devices/01:26:01:00:01/state +Date: July 2022 +KernelVersion: 5.20 +Contact: Maximilian Luz +Description: + This attribute returns a string with the current device posture, as indicated by the embedded controller. Currently + returned posture states are: + + - "closed": The lid of the device is closed. + + - "laptop": The lid of the device is opened and the device + operates as a normal laptop. + + - "slate": The screen covers the keyboard or has been flipped + back and the device operates mainly based on touch input. + + - "tablet": The device operates as tablet and exclusively + relies on touch input (or external peripherals). + + - "": The current state is unknown to the driver, for + example due to newer as-of-yet unsupported hardware. + + New states may be introduced with new hardware. Users therefore + must not rely on this list of states being exhaustive and + gracefully handle unknown states. diff --git a/MAINTAINERS b/MAINTAINERS index 08620b9a44fc..773eb8387f4a 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -13299,6 +13299,12 @@ F: drivers/scsi/smartpqi/smartpqi*.[ch] F: include/linux/cciss*.h F: include/uapi/linux/cciss*.h +MICROSOFT SURFACE AGGREGATOR TABLET-MODE SWITCH +M: Maximilian Luz +L: platform-driver-x86@vger.kernel.org +S: Maintained +F: drivers/platform/surface/surface_aggregator_tablet_switch.c + MICROSOFT SURFACE BATTERY AND AC DRIVERS M: Maximilian Luz L: linux-pm@vger.kernel.org diff --git a/drivers/platform/surface/Kconfig b/drivers/platform/surface/Kconfig index eb79fbed8059..b152e930cc84 100644 --- a/drivers/platform/surface/Kconfig +++ b/drivers/platform/surface/Kconfig @@ -99,6 +99,29 @@ config SURFACE_AGGREGATOR_REGISTRY the respective client devices. Drivers for these devices still need to be selected via the other options. +config SURFACE_AGGREGATOR_TABLET_SWITCH + tristate "Surface Aggregator Generic Tablet-Mode Switch Driver" + depends on SURFACE_AGGREGATOR + depends on SURFACE_AGGREGATOR_BUS + depends on INPUT + help + Provides a tablet-mode switch input device on Microsoft Surface models + using the KIP subsystem for detachable keyboards (e.g. keyboard covers) + or the POS subsystem for device/screen posture changes. + + The KIP subsystem is used on newer Surface generations to handle + detachable input peripherals, specifically the keyboard cover (containing + keyboard and touchpad) on the Surface Pro 8 and Surface Pro X. The POS + subsystem is used for device posture change notifications on the Surface + Laptop Studio. This module provides a driver to let user-space know when + the device should be considered in tablet-mode due to the keyboard cover + being detached or folded back (essentially signaling when the keyboard is + not available for input). It does so by creating a tablet-mode switch + input device, sending the standard SW_TABLET_MODE event on mode change. + + Select M or Y here, if you want to provide tablet-mode switch input + events on the Surface Pro 8, Surface Pro X, and Surface Laptop Studio. + config SURFACE_DTX tristate "Surface DTX (Detachment System) Driver" depends on SURFACE_AGGREGATOR diff --git a/drivers/platform/surface/Makefile b/drivers/platform/surface/Makefile index 0fc9cd3e4dd9..18b27898543e 100644 --- a/drivers/platform/surface/Makefile +++ b/drivers/platform/surface/Makefile @@ -10,6 +10,7 @@ obj-$(CONFIG_SURFACE_ACPI_NOTIFY) += surface_acpi_notify.o obj-$(CONFIG_SURFACE_AGGREGATOR) += aggregator/ obj-$(CONFIG_SURFACE_AGGREGATOR_CDEV) += surface_aggregator_cdev.o obj-$(CONFIG_SURFACE_AGGREGATOR_REGISTRY) += surface_aggregator_registry.o +obj-$(CONFIG_SURFACE_AGGREGATOR_TABLET_SWITCH) += surface_aggregator_tabletsw.o obj-$(CONFIG_SURFACE_DTX) += surface_dtx.o obj-$(CONFIG_SURFACE_GPE) += surface_gpe.o obj-$(CONFIG_SURFACE_HOTPLUG) += surface_hotplug.o diff --git a/drivers/platform/surface/surface_aggregator_tabletsw.c b/drivers/platform/surface/surface_aggregator_tabletsw.c new file mode 100644 index 000000000000..596ca6c80681 --- /dev/null +++ b/drivers/platform/surface/surface_aggregator_tabletsw.c @@ -0,0 +1,533 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Surface System Aggregator Module (SSAM) tablet mode switch driver. + * + * Copyright (C) 2022 Maximilian Luz + */ + +#include +#include +#include +#include +#include +#include + +#include +#include + + +/* -- SSAM generic tablet switch driver framework. -------------------------- */ + +struct ssam_tablet_sw; + +struct ssam_tablet_sw_ops { + int (*get_state)(struct ssam_tablet_sw *sw, u32 *state); + const char *(*state_name)(struct ssam_tablet_sw *sw, u32 state); + bool (*state_is_tablet_mode)(struct ssam_tablet_sw *sw, u32 state); +}; + +struct ssam_tablet_sw { + struct ssam_device *sdev; + + u32 state; + struct work_struct update_work; + struct input_dev *mode_switch; + + struct ssam_tablet_sw_ops ops; + struct ssam_event_notifier notif; +}; + +struct ssam_tablet_sw_desc { + struct { + const char *name; + const char *phys; + } dev; + + struct { + u32 (*notify)(struct ssam_event_notifier *nf, const struct ssam_event *event); + int (*get_state)(struct ssam_tablet_sw *sw, u32 *state); + const char *(*state_name)(struct ssam_tablet_sw *sw, u32 state); + bool (*state_is_tablet_mode)(struct ssam_tablet_sw *sw, u32 state); + } ops; + + struct { + struct ssam_event_registry reg; + struct ssam_event_id id; + enum ssam_event_mask mask; + u8 flags; + } event; +}; + +static ssize_t state_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct ssam_tablet_sw *sw = dev_get_drvdata(dev); + const char *state = sw->ops.state_name(sw, sw->state); + + return sysfs_emit(buf, "%s\n", state); +} +static DEVICE_ATTR_RO(state); + +static struct attribute *ssam_tablet_sw_attrs[] = { + &dev_attr_state.attr, + NULL, +}; + +static const struct attribute_group ssam_tablet_sw_group = { + .attrs = ssam_tablet_sw_attrs, +}; + +static void ssam_tablet_sw_update_workfn(struct work_struct *work) +{ + struct ssam_tablet_sw *sw = container_of(work, struct ssam_tablet_sw, update_work); + int tablet, status; + u32 state; + + status = sw->ops.get_state(sw, &state); + if (status) + return; + + if (sw->state == state) + return; + sw->state = state; + + /* Send SW_TABLET_MODE event. */ + tablet = sw->ops.state_is_tablet_mode(sw, state); + input_report_switch(sw->mode_switch, SW_TABLET_MODE, tablet); + input_sync(sw->mode_switch); +} + +static int __maybe_unused ssam_tablet_sw_resume(struct device *dev) +{ + struct ssam_tablet_sw *sw = dev_get_drvdata(dev); + + schedule_work(&sw->update_work); + return 0; +} +static SIMPLE_DEV_PM_OPS(ssam_tablet_sw_pm_ops, NULL, ssam_tablet_sw_resume); + +static int ssam_tablet_sw_probe(struct ssam_device *sdev) +{ + const struct ssam_tablet_sw_desc *desc; + struct ssam_tablet_sw *sw; + int tablet, status; + + desc = ssam_device_get_match_data(sdev); + if (!desc) { + WARN(1, "no driver match data specified"); + return -EINVAL; + } + + sw = devm_kzalloc(&sdev->dev, sizeof(*sw), GFP_KERNEL); + if (!sw) + return -ENOMEM; + + sw->sdev = sdev; + + sw->ops.get_state = desc->ops.get_state; + sw->ops.state_name = desc->ops.state_name; + sw->ops.state_is_tablet_mode = desc->ops.state_is_tablet_mode; + + INIT_WORK(&sw->update_work, ssam_tablet_sw_update_workfn); + + ssam_device_set_drvdata(sdev, sw); + + /* Get initial state. */ + status = sw->ops.get_state(sw, &sw->state); + if (status) + return status; + + /* Set up tablet mode switch. */ + sw->mode_switch = devm_input_allocate_device(&sdev->dev); + if (!sw->mode_switch) + return -ENOMEM; + + sw->mode_switch->name = desc->dev.name; + sw->mode_switch->phys = desc->dev.phys; + sw->mode_switch->id.bustype = BUS_HOST; + sw->mode_switch->dev.parent = &sdev->dev; + + tablet = sw->ops.state_is_tablet_mode(sw, sw->state); + input_set_capability(sw->mode_switch, EV_SW, SW_TABLET_MODE); + input_report_switch(sw->mode_switch, SW_TABLET_MODE, tablet); + + status = input_register_device(sw->mode_switch); + if (status) + return status; + + /* Set up notifier. */ + sw->notif.base.priority = 0; + sw->notif.base.fn = desc->ops.notify; + sw->notif.event.reg = desc->event.reg; + sw->notif.event.id = desc->event.id; + sw->notif.event.mask = desc->event.mask; + sw->notif.event.flags = SSAM_EVENT_SEQUENCED; + + status = ssam_device_notifier_register(sdev, &sw->notif); + if (status) + return status; + + status = sysfs_create_group(&sdev->dev.kobj, &ssam_tablet_sw_group); + if (status) + goto err; + + /* We might have missed events during setup, so check again. */ + schedule_work(&sw->update_work); + return 0; + +err: + ssam_device_notifier_unregister(sdev, &sw->notif); + cancel_work_sync(&sw->update_work); + return status; +} + +static void ssam_tablet_sw_remove(struct ssam_device *sdev) +{ + struct ssam_tablet_sw *sw = ssam_device_get_drvdata(sdev); + + sysfs_remove_group(&sdev->dev.kobj, &ssam_tablet_sw_group); + + ssam_device_notifier_unregister(sdev, &sw->notif); + cancel_work_sync(&sw->update_work); +} + + +/* -- SSAM KIP tablet switch implementation. -------------------------------- */ + +#define SSAM_EVENT_KIP_CID_COVER_STATE_CHANGED 0x1d + +enum ssam_kip_cover_state { + SSAM_KIP_COVER_STATE_DISCONNECTED = 0x01, + SSAM_KIP_COVER_STATE_CLOSED = 0x02, + SSAM_KIP_COVER_STATE_LAPTOP = 0x03, + SSAM_KIP_COVER_STATE_FOLDED_CANVAS = 0x04, + SSAM_KIP_COVER_STATE_FOLDED_BACK = 0x05, +}; + +static const char *ssam_kip_cover_state_name(struct ssam_tablet_sw *sw, u32 state) +{ + switch (state) { + case SSAM_KIP_COVER_STATE_DISCONNECTED: + return "disconnected"; + + case SSAM_KIP_COVER_STATE_CLOSED: + return "closed"; + + case SSAM_KIP_COVER_STATE_LAPTOP: + return "laptop"; + + case SSAM_KIP_COVER_STATE_FOLDED_CANVAS: + return "folded-canvas"; + + case SSAM_KIP_COVER_STATE_FOLDED_BACK: + return "folded-back"; + + default: + dev_warn(&sw->sdev->dev, "unknown KIP cover state: %u\n", state); + return ""; + } +} + +static bool ssam_kip_cover_state_is_tablet_mode(struct ssam_tablet_sw *sw, u32 state) +{ + switch (state) { + case SSAM_KIP_COVER_STATE_DISCONNECTED: + case SSAM_KIP_COVER_STATE_FOLDED_CANVAS: + case SSAM_KIP_COVER_STATE_FOLDED_BACK: + return true; + + case SSAM_KIP_COVER_STATE_CLOSED: + case SSAM_KIP_COVER_STATE_LAPTOP: + return false; + + default: + dev_warn(&sw->sdev->dev, "unknown KIP cover state: %d\n", sw->state); + return true; + } +} + +SSAM_DEFINE_SYNC_REQUEST_R(__ssam_kip_get_cover_state, u8, { + .target_category = SSAM_SSH_TC_KIP, + .target_id = 0x01, + .command_id = 0x1d, + .instance_id = 0x00, +}); + +static int ssam_kip_get_cover_state(struct ssam_tablet_sw *sw, u32 *state) +{ + int status; + u8 raw; + + status = ssam_retry(__ssam_kip_get_cover_state, sw->sdev->ctrl, &raw); + if (status < 0) { + dev_err(&sw->sdev->dev, "failed to query KIP lid state: %d\n", status); + return status; + } + + *state = raw; + return 0; +} + +static u32 ssam_kip_sw_notif(struct ssam_event_notifier *nf, const struct ssam_event *event) +{ + struct ssam_tablet_sw *sw = container_of(nf, struct ssam_tablet_sw, notif); + + if (event->command_id != SSAM_EVENT_KIP_CID_COVER_STATE_CHANGED) + return 0; /* Return "unhandled". */ + + if (event->length < 1) + dev_warn(&sw->sdev->dev, "unexpected payload size: %u\n", event->length); + + schedule_work(&sw->update_work); + return SSAM_NOTIF_HANDLED; +} + +static const struct ssam_tablet_sw_desc ssam_kip_sw_desc = { + .dev = { + .name = "Microsoft Surface KIP Tablet Mode Switch", + .phys = "ssam/01:0e:01:00:01/input0", + }, + .ops = { + .notify = ssam_kip_sw_notif, + .get_state = ssam_kip_get_cover_state, + .state_name = ssam_kip_cover_state_name, + .state_is_tablet_mode = ssam_kip_cover_state_is_tablet_mode, + }, + .event = { + .reg = SSAM_EVENT_REGISTRY_SAM, + .id = { + .target_category = SSAM_SSH_TC_KIP, + .instance = 0, + }, + .mask = SSAM_EVENT_MASK_TARGET, + }, +}; + + +/* -- SSAM POS tablet switch implementation. -------------------------------- */ + +static bool tablet_mode_in_slate_state = true; +module_param(tablet_mode_in_slate_state, bool, 0644); +MODULE_PARM_DESC(tablet_mode_in_slate_state, "Enable tablet mode in slate device posture, default is 'true'"); + +#define SSAM_EVENT_POS_CID_POSTURE_CHANGED 0x03 +#define SSAM_POS_MAX_SOURCES 4 + +enum ssam_pos_state { + SSAM_POS_POSTURE_LID_CLOSED = 0x00, + SSAM_POS_POSTURE_LAPTOP = 0x01, + SSAM_POS_POSTURE_SLATE = 0x02, + SSAM_POS_POSTURE_TABLET = 0x03, +}; + +struct ssam_sources_list { + __le32 count; + __le32 id[SSAM_POS_MAX_SOURCES]; +} __packed; + +static const char *ssam_pos_state_name(struct ssam_tablet_sw *sw, u32 state) +{ + switch (state) { + case SSAM_POS_POSTURE_LID_CLOSED: + return "closed"; + + case SSAM_POS_POSTURE_LAPTOP: + return "laptop"; + + case SSAM_POS_POSTURE_SLATE: + return "slate"; + + case SSAM_POS_POSTURE_TABLET: + return "tablet"; + + default: + dev_warn(&sw->sdev->dev, "unknown device posture: %u\n", state); + return ""; + } +} + +static bool ssam_pos_state_is_tablet_mode(struct ssam_tablet_sw *sw, u32 state) +{ + switch (state) { + case SSAM_POS_POSTURE_LAPTOP: + case SSAM_POS_POSTURE_LID_CLOSED: + return false; + + case SSAM_POS_POSTURE_SLATE: + return tablet_mode_in_slate_state; + + case SSAM_POS_POSTURE_TABLET: + return true; + + default: + dev_warn(&sw->sdev->dev, "unknown device posture: %u\n", state); + return true; + } +} + +static int ssam_pos_get_sources_list(struct ssam_tablet_sw *sw, struct ssam_sources_list *sources) +{ + struct ssam_request rqst; + struct ssam_response rsp; + int status; + + rqst.target_category = SSAM_SSH_TC_POS; + rqst.target_id = 0x01; + rqst.command_id = 0x01; + rqst.instance_id = 0x00; + rqst.flags = SSAM_REQUEST_HAS_RESPONSE; + rqst.length = 0; + rqst.payload = NULL; + + rsp.capacity = sizeof(*sources); + rsp.length = 0; + rsp.pointer = (u8 *)sources; + + status = ssam_retry(ssam_request_sync_onstack, sw->sdev->ctrl, &rqst, &rsp, 0); + if (status) + return status; + + /* We need at least the 'sources->count' field. */ + if (rsp.length < sizeof(__le32)) { + dev_err(&sw->sdev->dev, "received source list response is too small\n"); + return -EPROTO; + } + + /* Make sure 'sources->count' matches with the response length. */ + if (get_unaligned_le32(&sources->count) * sizeof(__le32) + sizeof(__le32) != rsp.length) { + dev_err(&sw->sdev->dev, "mismatch between number of sources and response size\n"); + return -EPROTO; + } + + return 0; +} + +static int ssam_pos_get_source(struct ssam_tablet_sw *sw, u32 *source_id) +{ + struct ssam_sources_list sources = {}; + int status; + + status = ssam_pos_get_sources_list(sw, &sources); + if (status) + return status; + + if (sources.count == 0) { + dev_err(&sw->sdev->dev, "no posture sources found\n"); + return -ENODEV; + } + + /* + * We currently don't know what to do with more than one posture + * source. At the moment, only one source seems to be used/provided. + * The WARN_ON() here should hopefully let us know quickly once there + * is a device that provides multiple sources, at which point we can + * then try to figure out how to handle them. + */ + WARN_ON(sources.count > 1); + + *source_id = get_unaligned_le32(&sources.id[0]); + return 0; +} + +SSAM_DEFINE_SYNC_REQUEST_WR(__ssam_pos_get_posture_for_source, __le32, __le32, { + .target_category = SSAM_SSH_TC_POS, + .target_id = 0x01, + .command_id = 0x02, + .instance_id = 0x00, +}); + +static int ssam_pos_get_posture_for_source(struct ssam_tablet_sw *sw, u32 source_id, u32 *posture) +{ + __le32 source_le = cpu_to_le32(source_id); + __le32 rspval_le = 0; + int status; + + status = ssam_retry(__ssam_pos_get_posture_for_source, sw->sdev->ctrl, + &source_le, &rspval_le); + if (status) + return status; + + *posture = le32_to_cpu(rspval_le); + return 0; +} + +static int ssam_pos_get_posture(struct ssam_tablet_sw *sw, u32 *state) +{ + u32 source_id; + int status; + + status = ssam_pos_get_source(sw, &source_id); + if (status) { + dev_err(&sw->sdev->dev, "failed to get posture source ID: %d\n", status); + return status; + } + + status = ssam_pos_get_posture_for_source(sw, source_id, state); + if (status) { + dev_err(&sw->sdev->dev, "failed to get posture value for source %u: %d\n", + source_id, status); + return status; + } + + return 0; +} + +static u32 ssam_pos_sw_notif(struct ssam_event_notifier *nf, const struct ssam_event *event) +{ + struct ssam_tablet_sw *sw = container_of(nf, struct ssam_tablet_sw, notif); + + if (event->command_id != SSAM_EVENT_POS_CID_POSTURE_CHANGED) + return 0; /* Return "unhandled". */ + + if (event->length != sizeof(__le32) * 3) + dev_warn(&sw->sdev->dev, "unexpected payload size: %u\n", event->length); + + schedule_work(&sw->update_work); + return SSAM_NOTIF_HANDLED; +} + +static const struct ssam_tablet_sw_desc ssam_pos_sw_desc = { + .dev = { + .name = "Microsoft Surface POS Tablet Mode Switch", + .phys = "ssam/01:26:01:00:01/input0", + }, + .ops = { + .notify = ssam_pos_sw_notif, + .get_state = ssam_pos_get_posture, + .state_name = ssam_pos_state_name, + .state_is_tablet_mode = ssam_pos_state_is_tablet_mode, + }, + .event = { + .reg = SSAM_EVENT_REGISTRY_SAM, + .id = { + .target_category = SSAM_SSH_TC_POS, + .instance = 0, + }, + .mask = SSAM_EVENT_MASK_TARGET, + }, +}; + + +/* -- Driver registration. -------------------------------------------------- */ + +static const struct ssam_device_id ssam_tablet_sw_match[] = { + { SSAM_SDEV(KIP, 0x01, 0x00, 0x01), (unsigned long)&ssam_kip_sw_desc }, + { SSAM_SDEV(POS, 0x01, 0x00, 0x01), (unsigned long)&ssam_pos_sw_desc }, + { }, +}; +MODULE_DEVICE_TABLE(ssam, ssam_tablet_sw_match); + +static struct ssam_device_driver ssam_tablet_sw_driver = { + .probe = ssam_tablet_sw_probe, + .remove = ssam_tablet_sw_remove, + .match_table = ssam_tablet_sw_match, + .driver = { + .name = "surface_aggregator_tablet_mode_switch", + .probe_type = PROBE_PREFER_ASYNCHRONOUS, + .pm = &ssam_tablet_sw_pm_ops, + }, +}; +module_ssam_device_driver(ssam_tablet_sw_driver); + +MODULE_AUTHOR("Maximilian Luz "); +MODULE_DESCRIPTION("Tablet mode switch driver for Surface devices using the Surface Aggregator Module"); +MODULE_LICENSE("GPL"); -- 2.37.2 From 9fd7721c374ba1ca794373cc0e83e2bbd89c2e35 Mon Sep 17 00:00:00 2001 From: Maximilian Luz Date: Fri, 24 Jun 2022 20:36:41 +0200 Subject: [PATCH] platform/surface: aggregator_registry: Add support for tablet mode switch on Surface Pro 8 Add a KIP subsystem tablet-mode switch device for the Surface Pro 8. The respective driver for this device provides SW_TABLET_MODE input events for user-space based on the state of the keyboard cover (e.g. detached, folded-back, normal/laptop mode). Signed-off-by: Maximilian Luz Link: https://lore.kernel.org/r/20220624183642.910893-4-luzmaximilian@gmail.com Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede Patchset: surface-sam --- drivers/platform/surface/surface_aggregator_registry.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/platform/surface/surface_aggregator_registry.c b/drivers/platform/surface/surface_aggregator_registry.c index bf3303f1aa71..8f249df673a4 100644 --- a/drivers/platform/surface/surface_aggregator_registry.c +++ b/drivers/platform/surface/surface_aggregator_registry.c @@ -77,6 +77,12 @@ static const struct software_node ssam_node_tmp_pprof = { .parent = &ssam_node_root, }; +/* Tablet-mode switch via KIP subsystem. */ +static const struct software_node ssam_node_kip_tablet_switch = { + .name = "ssam:01:0e:01:00:01", + .parent = &ssam_node_root, +}; + /* DTX / detachment-system device (Surface Book 3). */ static const struct software_node ssam_node_bas_dtx = { .name = "ssam:01:11:01:00:00", @@ -264,11 +270,11 @@ static const struct software_node *ssam_node_group_sp8[] = { &ssam_node_bat_ac, &ssam_node_bat_main, &ssam_node_tmp_pprof, + &ssam_node_kip_tablet_switch, &ssam_node_hid_kip_keyboard, &ssam_node_hid_kip_penstash, &ssam_node_hid_kip_touchpad, &ssam_node_hid_kip_iid5, - /* TODO: Add support for tablet mode switch. */ NULL, }; -- 2.37.2 From a5821fb95515a38add07abe5c38819b28e57a8ee Mon Sep 17 00:00:00 2001 From: Maximilian Luz Date: Fri, 24 Jun 2022 20:36:42 +0200 Subject: [PATCH] platform/surface: aggregator_registry: Add support for tablet mode switch on Surface Laptop Studio Add a POS subsystem tablet-mode switch device for the Surface Laptop Studio. The respective driver for this device provides SW_TABLET_MODE input events for user-space based on the posture of the screen. Signed-off-by: Maximilian Luz Link: https://lore.kernel.org/r/20220624183642.910893-5-luzmaximilian@gmail.com Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede Patchset: surface-sam --- drivers/platform/surface/surface_aggregator_registry.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/platform/surface/surface_aggregator_registry.c b/drivers/platform/surface/surface_aggregator_registry.c index 8f249df673a4..f1c5905f1c16 100644 --- a/drivers/platform/surface/surface_aggregator_registry.c +++ b/drivers/platform/surface/surface_aggregator_registry.c @@ -191,6 +191,12 @@ static const struct software_node ssam_node_hid_kip_iid5 = { .parent = &ssam_node_hub_kip, }; +/* Tablet-mode switch via POS subsystem. */ +static const struct software_node ssam_node_pos_tablet_switch = { + .name = "ssam:01:26:01:00:01", + .parent = &ssam_node_root, +}; + /* * Devices for 5th- and 6th-generations models: * - Surface Book 2, @@ -237,6 +243,7 @@ static const struct software_node *ssam_node_group_sls[] = { &ssam_node_bat_ac, &ssam_node_bat_main, &ssam_node_tmp_pprof, + &ssam_node_pos_tablet_switch, &ssam_node_hid_tid1_keyboard, &ssam_node_hid_tid1_penstash, &ssam_node_hid_tid1_touchpad, -- 2.37.2 From 02165399da8dc82730cf6c94242dde36e0d34198 Mon Sep 17 00:00:00 2001 From: Maximilian Luz Date: Fri, 24 Jun 2022 22:57:58 +0200 Subject: [PATCH] platform/surface: aggregator: Move device registry helper functions to core module Move helper functions for client device registration to the core module. This simplifies addition of future DT/OF support and also allows us to split out the device hub drivers into their own module. At the same time, also improve device node validation a bit by not silently skipping devices with invalid device UID specifiers. Further, ensure proper lifetime management for the firmware/software nodes associated with the added devices. Signed-off-by: Maximilian Luz Link: https://lore.kernel.org/r/20220624205800.1355621-2-luzmaximilian@gmail.com Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede Patchset: surface-sam --- drivers/platform/surface/aggregator/bus.c | 149 ++++++++++++++++-- .../surface/surface_aggregator_registry.c | 75 +-------- include/linux/surface_aggregator/device.h | 52 ++++++ 3 files changed, 187 insertions(+), 89 deletions(-) diff --git a/drivers/platform/surface/aggregator/bus.c b/drivers/platform/surface/aggregator/bus.c index abbbb5b08b07..e0b0381a2834 100644 --- a/drivers/platform/surface/aggregator/bus.c +++ b/drivers/platform/surface/aggregator/bus.c @@ -6,6 +6,7 @@ */ #include +#include #include #include @@ -14,6 +15,9 @@ #include "bus.h" #include "controller.h" + +/* -- Device and bus functions. --------------------------------------------- */ + static ssize_t modalias_show(struct device *dev, struct device_attribute *attr, char *buf) { @@ -46,6 +50,7 @@ static void ssam_device_release(struct device *dev) struct ssam_device *sdev = to_ssam_device(dev); ssam_controller_put(sdev->ctrl); + fwnode_handle_put(sdev->dev.fwnode); kfree(sdev); } @@ -363,6 +368,134 @@ void ssam_device_driver_unregister(struct ssam_device_driver *sdrv) } EXPORT_SYMBOL_GPL(ssam_device_driver_unregister); + +/* -- Bus registration. ----------------------------------------------------- */ + +/** + * ssam_bus_register() - Register and set-up the SSAM client device bus. + */ +int ssam_bus_register(void) +{ + return bus_register(&ssam_bus_type); +} + +/** + * ssam_bus_unregister() - Unregister the SSAM client device bus. + */ +void ssam_bus_unregister(void) +{ + return bus_unregister(&ssam_bus_type); +} + + +/* -- Helpers for controller and hub devices. ------------------------------- */ + +static int ssam_device_uid_from_string(const char *str, struct ssam_device_uid *uid) +{ + u8 d, tc, tid, iid, fn; + int n; + + n = sscanf(str, "%hhx:%hhx:%hhx:%hhx:%hhx", &d, &tc, &tid, &iid, &fn); + if (n != 5) + return -EINVAL; + + uid->domain = d; + uid->category = tc; + uid->target = tid; + uid->instance = iid; + uid->function = fn; + + return 0; +} + +static int ssam_get_uid_for_node(struct fwnode_handle *node, struct ssam_device_uid *uid) +{ + const char *str = fwnode_get_name(node); + + /* + * To simplify definitions of firmware nodes, we set the device name + * based on the UID of the device, prefixed with "ssam:". + */ + if (strncmp(str, "ssam:", strlen("ssam:")) != 0) + return -ENODEV; + + str += strlen("ssam:"); + return ssam_device_uid_from_string(str, uid); +} + +static int ssam_add_client_device(struct device *parent, struct ssam_controller *ctrl, + struct fwnode_handle *node) +{ + struct ssam_device_uid uid; + struct ssam_device *sdev; + int status; + + status = ssam_get_uid_for_node(node, &uid); + if (status) + return status; + + sdev = ssam_device_alloc(ctrl, uid); + if (!sdev) + return -ENOMEM; + + sdev->dev.parent = parent; + sdev->dev.fwnode = fwnode_handle_get(node); + + status = ssam_device_add(sdev); + if (status) + ssam_device_put(sdev); + + return status; +} + +/** + * __ssam_register_clients() - Register client devices defined under the + * given firmware node as children of the given device. + * @parent: The parent device under which clients should be registered. + * @ctrl: The controller with which client should be registered. + * @node: The firmware node holding definitions of the devices to be added. + * + * Register all clients that have been defined as children of the given root + * firmware node as children of the given parent device. The respective child + * firmware nodes will be associated with the correspondingly created child + * devices. + * + * The given controller will be used to instantiate the new devices. See + * ssam_device_add() for details. + * + * Note that, generally, the use of either ssam_device_register_clients() or + * ssam_register_clients() should be preferred as they directly use the + * firmware node and/or controller associated with the given device. This + * function is only intended for use when different device specifications (e.g. + * ACPI and firmware nodes) need to be combined (as is done in the platform hub + * of the device registry). + * + * Return: Returns zero on success, nonzero on failure. + */ +int __ssam_register_clients(struct device *parent, struct ssam_controller *ctrl, + struct fwnode_handle *node) +{ + struct fwnode_handle *child; + int status; + + fwnode_for_each_child_node(node, child) { + /* + * Try to add the device specified in the firmware node. If + * this fails with -ENODEV, the node does not specify any SSAM + * device, so ignore it and continue with the next one. + */ + status = ssam_add_client_device(parent, ctrl, child); + if (status && status != -ENODEV) + goto err; + } + + return 0; +err: + ssam_remove_clients(parent); + return status; +} +EXPORT_SYMBOL_GPL(__ssam_register_clients); + static int ssam_remove_device(struct device *dev, void *_data) { struct ssam_device *sdev = to_ssam_device(dev); @@ -387,19 +520,3 @@ void ssam_remove_clients(struct device *dev) device_for_each_child_reverse(dev, NULL, ssam_remove_device); } EXPORT_SYMBOL_GPL(ssam_remove_clients); - -/** - * ssam_bus_register() - Register and set-up the SSAM client device bus. - */ -int ssam_bus_register(void) -{ - return bus_register(&ssam_bus_type); -} - -/** - * ssam_bus_unregister() - Unregister the SSAM client device bus. - */ -void ssam_bus_unregister(void) -{ - return bus_unregister(&ssam_bus_type); -} diff --git a/drivers/platform/surface/surface_aggregator_registry.c b/drivers/platform/surface/surface_aggregator_registry.c index f1c5905f1c16..c680792a037e 100644 --- a/drivers/platform/surface/surface_aggregator_registry.c +++ b/drivers/platform/surface/surface_aggregator_registry.c @@ -286,76 +286,6 @@ static const struct software_node *ssam_node_group_sp8[] = { }; -/* -- Device registry helper functions. ------------------------------------- */ - -static int ssam_uid_from_string(const char *str, struct ssam_device_uid *uid) -{ - u8 d, tc, tid, iid, fn; - int n; - - n = sscanf(str, "ssam:%hhx:%hhx:%hhx:%hhx:%hhx", &d, &tc, &tid, &iid, &fn); - if (n != 5) - return -EINVAL; - - uid->domain = d; - uid->category = tc; - uid->target = tid; - uid->instance = iid; - uid->function = fn; - - return 0; -} - -static int ssam_hub_add_device(struct device *parent, struct ssam_controller *ctrl, - struct fwnode_handle *node) -{ - struct ssam_device_uid uid; - struct ssam_device *sdev; - int status; - - status = ssam_uid_from_string(fwnode_get_name(node), &uid); - if (status) - return status; - - sdev = ssam_device_alloc(ctrl, uid); - if (!sdev) - return -ENOMEM; - - sdev->dev.parent = parent; - sdev->dev.fwnode = node; - - status = ssam_device_add(sdev); - if (status) - ssam_device_put(sdev); - - return status; -} - -static int ssam_hub_register_clients(struct device *parent, struct ssam_controller *ctrl, - struct fwnode_handle *node) -{ - struct fwnode_handle *child; - int status; - - fwnode_for_each_child_node(node, child) { - /* - * Try to add the device specified in the firmware node. If - * this fails with -EINVAL, the node does not specify any SSAM - * device, so ignore it and continue with the next one. - */ - - status = ssam_hub_add_device(parent, ctrl, child); - if (status && status != -EINVAL) - goto err; - } - - return 0; -err: - ssam_remove_clients(parent); - return status; -} - - /* -- SSAM generic subsystem hub driver framework. -------------------------- */ enum ssam_hub_state { @@ -385,7 +315,6 @@ struct ssam_hub { static void ssam_hub_update_workfn(struct work_struct *work) { struct ssam_hub *hub = container_of(work, struct ssam_hub, update_work.work); - struct fwnode_handle *node = dev_fwnode(&hub->sdev->dev); enum ssam_hub_state state; int status = 0; @@ -425,7 +354,7 @@ static void ssam_hub_update_workfn(struct work_struct *work) hub->state = state; if (hub->state == SSAM_HUB_CONNECTED) - status = ssam_hub_register_clients(&hub->sdev->dev, hub->sdev->ctrl, node); + status = ssam_device_register_clients(hub->sdev); else ssam_remove_clients(&hub->sdev->dev); @@ -769,7 +698,7 @@ static int ssam_platform_hub_probe(struct platform_device *pdev) set_secondary_fwnode(&pdev->dev, root); - status = ssam_hub_register_clients(&pdev->dev, ctrl, root); + status = __ssam_register_clients(&pdev->dev, ctrl, root); if (status) { set_secondary_fwnode(&pdev->dev, NULL); software_node_unregister_node_group(nodes); diff --git a/include/linux/surface_aggregator/device.h b/include/linux/surface_aggregator/device.h index 6cf7e80312d5..46c45d1b6368 100644 --- a/include/linux/surface_aggregator/device.h +++ b/include/linux/surface_aggregator/device.h @@ -15,6 +15,7 @@ #include #include +#include #include #include @@ -375,11 +376,62 @@ void ssam_device_driver_unregister(struct ssam_device_driver *d); /* -- Helpers for controller and hub devices. ------------------------------- */ #ifdef CONFIG_SURFACE_AGGREGATOR_BUS + +int __ssam_register_clients(struct device *parent, struct ssam_controller *ctrl, + struct fwnode_handle *node); void ssam_remove_clients(struct device *dev); + #else /* CONFIG_SURFACE_AGGREGATOR_BUS */ + +static inline int __ssam_register_clients(struct device *parent, struct ssam_controller *ctrl, + struct fwnode_handle *node) +{ + return 0; +} + static inline void ssam_remove_clients(struct device *dev) {} + #endif /* CONFIG_SURFACE_AGGREGATOR_BUS */ +/** + * ssam_register_clients() - Register all client devices defined under the + * given parent device. + * @dev: The parent device under which clients should be registered. + * @ctrl: The controller with which client should be registered. + * + * Register all clients that have via firmware nodes been defined as children + * of the given (parent) device. The respective child firmware nodes will be + * associated with the correspondingly created child devices. + * + * The given controller will be used to instantiate the new devices. See + * ssam_device_add() for details. + * + * Return: Returns zero on success, nonzero on failure. + */ +static inline int ssam_register_clients(struct device *dev, struct ssam_controller *ctrl) +{ + return __ssam_register_clients(dev, ctrl, dev_fwnode(dev)); +} + +/** + * ssam_device_register_clients() - Register all client devices defined under + * the given SSAM parent device. + * @sdev: The parent device under which clients should be registered. + * + * Register all clients that have via firmware nodes been defined as children + * of the given (parent) device. The respective child firmware nodes will be + * associated with the correspondingly created child devices. + * + * The controller used by the parent device will be used to instantiate the new + * devices. See ssam_device_add() for details. + * + * Return: Returns zero on success, nonzero on failure. + */ +static inline int ssam_device_register_clients(struct ssam_device *sdev) +{ + return ssam_register_clients(&sdev->dev, sdev->ctrl); +} + /* -- Helpers for client-device requests. ----------------------------------- */ -- 2.37.2 From db121ba08884dddbb98faeed98885e49deb97c32 Mon Sep 17 00:00:00 2001 From: Maximilian Luz Date: Fri, 24 Jun 2022 22:57:59 +0200 Subject: [PATCH] platform/surface: aggregator: Move subsystem hub drivers to their own module Split out subsystem device hub drivers into their own module. This allows us to load the hub drivers separately from the registry, which will help future DT/OF support. While doing so, also remove a small bit of code duplication. Signed-off-by: Maximilian Luz Link: https://lore.kernel.org/r/20220624205800.1355621-3-luzmaximilian@gmail.com Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede Patchset: surface-sam --- MAINTAINERS | 6 + drivers/platform/surface/Kconfig | 35 +- drivers/platform/surface/Makefile | 1 + .../platform/surface/surface_aggregator_hub.c | 371 ++++++++++++++++++ .../surface/surface_aggregator_registry.c | 371 +----------------- 5 files changed, 410 insertions(+), 374 deletions(-) create mode 100644 drivers/platform/surface/surface_aggregator_hub.c diff --git a/MAINTAINERS b/MAINTAINERS index 773eb8387f4a..55e80354a097 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -13376,6 +13376,12 @@ F: include/linux/surface_acpi_notify.h F: include/linux/surface_aggregator/ F: include/uapi/linux/surface_aggregator/ +MICROSOFT SURFACE SYSTEM AGGREGATOR HUB DRIVER +M: Maximilian Luz +L: platform-driver-x86@vger.kernel.org +S: Maintained +F: drivers/platform/surface/surface_aggregator_hub.c + MICROTEK X6 SCANNER M: Oliver Neukum S: Maintained diff --git a/drivers/platform/surface/Kconfig b/drivers/platform/surface/Kconfig index b152e930cc84..b629e82af97c 100644 --- a/drivers/platform/surface/Kconfig +++ b/drivers/platform/surface/Kconfig @@ -72,18 +72,45 @@ config SURFACE_AGGREGATOR_CDEV The provided interface is intended for debugging and development only, and should not be used otherwise. +config SURFACE_AGGREGATOR_HUB + tristate "Surface System Aggregator Module Subsystem Device Hubs" + depends on SURFACE_AGGREGATOR + depends on SURFACE_AGGREGATOR_BUS + help + Device-hub drivers for Surface System Aggregator Module (SSAM) subsystem + devices. + + Provides subsystem hub drivers which manage client devices on various + SSAM subsystems. In some subsystems, notably the BAS subsystem managing + devices contained in the base of the Surface Book 3 and the KIP subsystem + managing type-cover devices in the Surface Pro 8 and Surface Pro X, + devices can be (hot-)removed. Hub devices and drivers are required to + manage these subdevices. + + Devices managed via these hubs are: + - Battery/AC devices (Surface Book 3). + - HID input devices (7th-generation and later models with detachable + input devices). + + Select M (recommended) or Y here if you want support for the above + mentioned devices on the corresponding Surface models. Without this + module, the respective devices mentioned above will not be instantiated + and thus any functionality provided by them will be missing, even when + drivers for these devices are present. This module only provides the + respective subsystem hubs. Both drivers and device specification (e.g. + via the Surface Aggregator Registry) for these devices still need to be + selected via other options. + config SURFACE_AGGREGATOR_REGISTRY tristate "Surface System Aggregator Module Device Registry" depends on SURFACE_AGGREGATOR depends on SURFACE_AGGREGATOR_BUS help - Device-registry and device-hubs for Surface System Aggregator Module - (SSAM) devices. + Device-registry for Surface System Aggregator Module (SSAM) devices. Provides a module and driver which act as a device-registry for SSAM client devices that cannot be detected automatically, e.g. via ACPI. - Such devices are instead provided via this registry and attached via - device hubs, also provided in this module. + Such devices are instead provided and managed via this registry. Devices provided via this registry are: - Platform profile (performance-/cooling-mode) device (5th- and later diff --git a/drivers/platform/surface/Makefile b/drivers/platform/surface/Makefile index 18b27898543e..53344330939b 100644 --- a/drivers/platform/surface/Makefile +++ b/drivers/platform/surface/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_SURFACE_3_POWER_OPREGION) += surface3_power.o obj-$(CONFIG_SURFACE_ACPI_NOTIFY) += surface_acpi_notify.o obj-$(CONFIG_SURFACE_AGGREGATOR) += aggregator/ obj-$(CONFIG_SURFACE_AGGREGATOR_CDEV) += surface_aggregator_cdev.o +obj-$(CONFIG_SURFACE_AGGREGATOR_HUB) += surface_aggregator_hub.o obj-$(CONFIG_SURFACE_AGGREGATOR_REGISTRY) += surface_aggregator_registry.o obj-$(CONFIG_SURFACE_AGGREGATOR_TABLET_SWITCH) += surface_aggregator_tabletsw.o obj-$(CONFIG_SURFACE_DTX) += surface_dtx.o diff --git a/drivers/platform/surface/surface_aggregator_hub.c b/drivers/platform/surface/surface_aggregator_hub.c new file mode 100644 index 000000000000..43061514be38 --- /dev/null +++ b/drivers/platform/surface/surface_aggregator_hub.c @@ -0,0 +1,371 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Driver for Surface System Aggregator Module (SSAM) subsystem device hubs. + * + * Provides a driver for SSAM subsystems device hubs. This driver performs + * instantiation of the devices managed by said hubs and takes care of + * (hot-)removal. + * + * Copyright (C) 2020-2022 Maximilian Luz + */ + +#include +#include +#include +#include +#include + +#include + + +/* -- SSAM generic subsystem hub driver framework. -------------------------- */ + +enum ssam_hub_state { + SSAM_HUB_UNINITIALIZED, /* Only set during initialization. */ + SSAM_HUB_CONNECTED, + SSAM_HUB_DISCONNECTED, +}; + +enum ssam_hub_flags { + SSAM_HUB_HOT_REMOVED, +}; + +struct ssam_hub; + +struct ssam_hub_ops { + int (*get_state)(struct ssam_hub *hub, enum ssam_hub_state *state); +}; + +struct ssam_hub { + struct ssam_device *sdev; + + enum ssam_hub_state state; + unsigned long flags; + + struct delayed_work update_work; + unsigned long connect_delay; + + struct ssam_event_notifier notif; + struct ssam_hub_ops ops; +}; + +struct ssam_hub_desc { + struct { + struct ssam_event_registry reg; + struct ssam_event_id id; + enum ssam_event_mask mask; + } event; + + struct { + u32 (*notify)(struct ssam_event_notifier *nf, const struct ssam_event *event); + int (*get_state)(struct ssam_hub *hub, enum ssam_hub_state *state); + } ops; + + unsigned long connect_delay_ms; +}; + +static void ssam_hub_update_workfn(struct work_struct *work) +{ + struct ssam_hub *hub = container_of(work, struct ssam_hub, update_work.work); + enum ssam_hub_state state; + int status = 0; + + status = hub->ops.get_state(hub, &state); + if (status) + return; + + /* + * There is a small possibility that hub devices were hot-removed and + * re-added before we were able to remove them here. In that case, both + * the state returned by get_state() and the state of the hub will + * equal SSAM_HUB_CONNECTED and we would bail early below, which would + * leave child devices without proper (re-)initialization and the + * hot-remove flag set. + * + * Therefore, we check whether devices have been hot-removed via an + * additional flag on the hub and, in this case, override the returned + * hub state. In case of a missed disconnect (i.e. get_state returned + * "connected"), we further need to re-schedule this work (with the + * appropriate delay) as the actual connect work submission might have + * been merged with this one. + * + * This then leads to one of two cases: Either we submit an unnecessary + * work item (which will get ignored via either the queue or the state + * checks) or, in the unlikely case that the work is actually required, + * double the normal connect delay. + */ + if (test_and_clear_bit(SSAM_HUB_HOT_REMOVED, &hub->flags)) { + if (state == SSAM_HUB_CONNECTED) + schedule_delayed_work(&hub->update_work, hub->connect_delay); + + state = SSAM_HUB_DISCONNECTED; + } + + if (hub->state == state) + return; + hub->state = state; + + if (hub->state == SSAM_HUB_CONNECTED) + status = ssam_device_register_clients(hub->sdev); + else + ssam_remove_clients(&hub->sdev->dev); + + if (status) + dev_err(&hub->sdev->dev, "failed to update hub child devices: %d\n", status); +} + +static int ssam_hub_mark_hot_removed(struct device *dev, void *_data) +{ + struct ssam_device *sdev = to_ssam_device(dev); + + if (is_ssam_device(dev)) + ssam_device_mark_hot_removed(sdev); + + return 0; +} + +static void ssam_hub_update(struct ssam_hub *hub, bool connected) +{ + unsigned long delay; + + /* Mark devices as hot-removed before we remove any. */ + if (!connected) { + set_bit(SSAM_HUB_HOT_REMOVED, &hub->flags); + device_for_each_child_reverse(&hub->sdev->dev, NULL, ssam_hub_mark_hot_removed); + } + + /* + * Delay update when the base/keyboard cover is being connected to give + * devices/EC some time to set up. + */ + delay = connected ? hub->connect_delay : 0; + + schedule_delayed_work(&hub->update_work, delay); +} + +static int __maybe_unused ssam_hub_resume(struct device *dev) +{ + struct ssam_hub *hub = dev_get_drvdata(dev); + + schedule_delayed_work(&hub->update_work, 0); + return 0; +} +static SIMPLE_DEV_PM_OPS(ssam_hub_pm_ops, NULL, ssam_hub_resume); + +static int ssam_hub_probe(struct ssam_device *sdev) +{ + const struct ssam_hub_desc *desc; + struct ssam_hub *hub; + int status; + + desc = ssam_device_get_match_data(sdev); + if (!desc) { + WARN(1, "no driver match data specified"); + return -EINVAL; + } + + hub = devm_kzalloc(&sdev->dev, sizeof(*hub), GFP_KERNEL); + if (!hub) + return -ENOMEM; + + hub->sdev = sdev; + hub->state = SSAM_HUB_UNINITIALIZED; + + hub->notif.base.priority = INT_MAX; /* This notifier should run first. */ + hub->notif.base.fn = desc->ops.notify; + hub->notif.event.reg = desc->event.reg; + hub->notif.event.id = desc->event.id; + hub->notif.event.mask = desc->event.mask; + hub->notif.event.flags = SSAM_EVENT_SEQUENCED; + + hub->connect_delay = msecs_to_jiffies(desc->connect_delay_ms); + hub->ops.get_state = desc->ops.get_state; + + INIT_DELAYED_WORK(&hub->update_work, ssam_hub_update_workfn); + + ssam_device_set_drvdata(sdev, hub); + + status = ssam_device_notifier_register(sdev, &hub->notif); + if (status) + return status; + + schedule_delayed_work(&hub->update_work, 0); + return 0; +} + +static void ssam_hub_remove(struct ssam_device *sdev) +{ + struct ssam_hub *hub = ssam_device_get_drvdata(sdev); + + ssam_device_notifier_unregister(sdev, &hub->notif); + cancel_delayed_work_sync(&hub->update_work); + ssam_remove_clients(&sdev->dev); +} + + +/* -- SSAM base-subsystem hub driver. --------------------------------------- */ + +/* + * Some devices (especially battery) may need a bit of time to be fully usable + * after being (re-)connected. This delay has been determined via + * experimentation. + */ +#define SSAM_BASE_UPDATE_CONNECT_DELAY 2500 + +SSAM_DEFINE_SYNC_REQUEST_R(ssam_bas_query_opmode, u8, { + .target_category = SSAM_SSH_TC_BAS, + .target_id = 0x01, + .command_id = 0x0d, + .instance_id = 0x00, +}); + +#define SSAM_BAS_OPMODE_TABLET 0x00 +#define SSAM_EVENT_BAS_CID_CONNECTION 0x0c + +static int ssam_base_hub_query_state(struct ssam_hub *hub, enum ssam_hub_state *state) +{ + u8 opmode; + int status; + + status = ssam_retry(ssam_bas_query_opmode, hub->sdev->ctrl, &opmode); + if (status < 0) { + dev_err(&hub->sdev->dev, "failed to query base state: %d\n", status); + return status; + } + + if (opmode != SSAM_BAS_OPMODE_TABLET) + *state = SSAM_HUB_CONNECTED; + else + *state = SSAM_HUB_DISCONNECTED; + + return 0; +} + +static u32 ssam_base_hub_notif(struct ssam_event_notifier *nf, const struct ssam_event *event) +{ + struct ssam_hub *hub = container_of(nf, struct ssam_hub, notif); + + if (event->command_id != SSAM_EVENT_BAS_CID_CONNECTION) + return 0; + + if (event->length < 1) { + dev_err(&hub->sdev->dev, "unexpected payload size: %u\n", event->length); + return 0; + } + + ssam_hub_update(hub, event->data[0]); + + /* + * Do not return SSAM_NOTIF_HANDLED: The event should be picked up and + * consumed by the detachment system driver. We're just a (more or less) + * silent observer. + */ + return 0; +} + +static const struct ssam_hub_desc base_hub = { + .event = { + .reg = SSAM_EVENT_REGISTRY_SAM, + .id = { + .target_category = SSAM_SSH_TC_BAS, + .instance = 0, + }, + .mask = SSAM_EVENT_MASK_NONE, + }, + .ops = { + .notify = ssam_base_hub_notif, + .get_state = ssam_base_hub_query_state, + }, + .connect_delay_ms = SSAM_BASE_UPDATE_CONNECT_DELAY, +}; + + +/* -- SSAM KIP-subsystem hub driver. ---------------------------------------- */ + +/* + * Some devices may need a bit of time to be fully usable after being + * (re-)connected. This delay has been determined via experimentation. + */ +#define SSAM_KIP_UPDATE_CONNECT_DELAY 250 + +#define SSAM_EVENT_KIP_CID_CONNECTION 0x2c + +SSAM_DEFINE_SYNC_REQUEST_R(__ssam_kip_query_state, u8, { + .target_category = SSAM_SSH_TC_KIP, + .target_id = 0x01, + .command_id = 0x2c, + .instance_id = 0x00, +}); + +static int ssam_kip_hub_query_state(struct ssam_hub *hub, enum ssam_hub_state *state) +{ + int status; + u8 connected; + + status = ssam_retry(__ssam_kip_query_state, hub->sdev->ctrl, &connected); + if (status < 0) { + dev_err(&hub->sdev->dev, "failed to query KIP connection state: %d\n", status); + return status; + } + + *state = connected ? SSAM_HUB_CONNECTED : SSAM_HUB_DISCONNECTED; + return 0; +} + +static u32 ssam_kip_hub_notif(struct ssam_event_notifier *nf, const struct ssam_event *event) +{ + struct ssam_hub *hub = container_of(nf, struct ssam_hub, notif); + + if (event->command_id != SSAM_EVENT_KIP_CID_CONNECTION) + return 0; /* Return "unhandled". */ + + if (event->length < 1) { + dev_err(&hub->sdev->dev, "unexpected payload size: %u\n", event->length); + return 0; + } + + ssam_hub_update(hub, event->data[0]); + return SSAM_NOTIF_HANDLED; +} + +static const struct ssam_hub_desc kip_hub = { + .event = { + .reg = SSAM_EVENT_REGISTRY_SAM, + .id = { + .target_category = SSAM_SSH_TC_KIP, + .instance = 0, + }, + .mask = SSAM_EVENT_MASK_TARGET, + }, + .ops = { + .notify = ssam_kip_hub_notif, + .get_state = ssam_kip_hub_query_state, + }, + .connect_delay_ms = SSAM_KIP_UPDATE_CONNECT_DELAY, +}; + + +/* -- Driver registration. -------------------------------------------------- */ + +static const struct ssam_device_id ssam_hub_match[] = { + { SSAM_VDEV(HUB, 0x01, SSAM_SSH_TC_KIP, 0x00), (unsigned long)&kip_hub }, + { SSAM_VDEV(HUB, 0x02, SSAM_SSH_TC_BAS, 0x00), (unsigned long)&base_hub }, + { } +}; +MODULE_DEVICE_TABLE(ssam, ssam_hub_match); + +static struct ssam_device_driver ssam_subsystem_hub_driver = { + .probe = ssam_hub_probe, + .remove = ssam_hub_remove, + .match_table = ssam_hub_match, + .driver = { + .name = "surface_aggregator_subsystem_hub", + .probe_type = PROBE_PREFER_ASYNCHRONOUS, + .pm = &ssam_hub_pm_ops, + }, +}; +module_ssam_device_driver(ssam_subsystem_hub_driver); + +MODULE_AUTHOR("Maximilian Luz "); +MODULE_DESCRIPTION("Subsystem device hub driver for Surface System Aggregator Module"); +MODULE_LICENSE("GPL"); diff --git a/drivers/platform/surface/surface_aggregator_registry.c b/drivers/platform/surface/surface_aggregator_registry.c index c680792a037e..0cbb7f3a6b2d 100644 --- a/drivers/platform/surface/surface_aggregator_registry.c +++ b/drivers/platform/surface/surface_aggregator_registry.c @@ -11,14 +11,11 @@ #include #include -#include #include #include #include #include -#include -#include #include @@ -286,335 +283,6 @@ static const struct software_node *ssam_node_group_sp8[] = { }; -/* -- SSAM generic subsystem hub driver framework. -------------------------- */ - -enum ssam_hub_state { - SSAM_HUB_UNINITIALIZED, /* Only set during initialization. */ - SSAM_HUB_CONNECTED, - SSAM_HUB_DISCONNECTED, -}; - -enum ssam_hub_flags { - SSAM_HUB_HOT_REMOVED, -}; - -struct ssam_hub { - struct ssam_device *sdev; - - enum ssam_hub_state state; - unsigned long flags; - - struct delayed_work update_work; - unsigned long connect_delay; - - struct ssam_event_notifier notif; - - int (*get_state)(struct ssam_hub *hub, enum ssam_hub_state *state); -}; - -static void ssam_hub_update_workfn(struct work_struct *work) -{ - struct ssam_hub *hub = container_of(work, struct ssam_hub, update_work.work); - enum ssam_hub_state state; - int status = 0; - - status = hub->get_state(hub, &state); - if (status) - return; - - /* - * There is a small possibility that hub devices were hot-removed and - * re-added before we were able to remove them here. In that case, both - * the state returned by get_state() and the state of the hub will - * equal SSAM_HUB_CONNECTED and we would bail early below, which would - * leave child devices without proper (re-)initialization and the - * hot-remove flag set. - * - * Therefore, we check whether devices have been hot-removed via an - * additional flag on the hub and, in this case, override the returned - * hub state. In case of a missed disconnect (i.e. get_state returned - * "connected"), we further need to re-schedule this work (with the - * appropriate delay) as the actual connect work submission might have - * been merged with this one. - * - * This then leads to one of two cases: Either we submit an unnecessary - * work item (which will get ignored via either the queue or the state - * checks) or, in the unlikely case that the work is actually required, - * double the normal connect delay. - */ - if (test_and_clear_bit(SSAM_HUB_HOT_REMOVED, &hub->flags)) { - if (state == SSAM_HUB_CONNECTED) - schedule_delayed_work(&hub->update_work, hub->connect_delay); - - state = SSAM_HUB_DISCONNECTED; - } - - if (hub->state == state) - return; - hub->state = state; - - if (hub->state == SSAM_HUB_CONNECTED) - status = ssam_device_register_clients(hub->sdev); - else - ssam_remove_clients(&hub->sdev->dev); - - if (status) - dev_err(&hub->sdev->dev, "failed to update hub child devices: %d\n", status); -} - -static int ssam_hub_mark_hot_removed(struct device *dev, void *_data) -{ - struct ssam_device *sdev = to_ssam_device(dev); - - if (is_ssam_device(dev)) - ssam_device_mark_hot_removed(sdev); - - return 0; -} - -static void ssam_hub_update(struct ssam_hub *hub, bool connected) -{ - unsigned long delay; - - /* Mark devices as hot-removed before we remove any. */ - if (!connected) { - set_bit(SSAM_HUB_HOT_REMOVED, &hub->flags); - device_for_each_child_reverse(&hub->sdev->dev, NULL, ssam_hub_mark_hot_removed); - } - - /* - * Delay update when the base/keyboard cover is being connected to give - * devices/EC some time to set up. - */ - delay = connected ? hub->connect_delay : 0; - - schedule_delayed_work(&hub->update_work, delay); -} - -static int __maybe_unused ssam_hub_resume(struct device *dev) -{ - struct ssam_hub *hub = dev_get_drvdata(dev); - - schedule_delayed_work(&hub->update_work, 0); - return 0; -} -static SIMPLE_DEV_PM_OPS(ssam_hub_pm_ops, NULL, ssam_hub_resume); - -static int ssam_hub_setup(struct ssam_device *sdev, struct ssam_hub *hub) -{ - int status; - - hub->sdev = sdev; - hub->state = SSAM_HUB_UNINITIALIZED; - - INIT_DELAYED_WORK(&hub->update_work, ssam_hub_update_workfn); - - ssam_device_set_drvdata(sdev, hub); - - status = ssam_device_notifier_register(sdev, &hub->notif); - if (status) - return status; - - schedule_delayed_work(&hub->update_work, 0); - return 0; -} - -static void ssam_hub_remove(struct ssam_device *sdev) -{ - struct ssam_hub *hub = ssam_device_get_drvdata(sdev); - - ssam_device_notifier_unregister(sdev, &hub->notif); - cancel_delayed_work_sync(&hub->update_work); - ssam_remove_clients(&sdev->dev); -} - - -/* -- SSAM base-hub driver. ------------------------------------------------- */ - -/* - * Some devices (especially battery) may need a bit of time to be fully usable - * after being (re-)connected. This delay has been determined via - * experimentation. - */ -#define SSAM_BASE_UPDATE_CONNECT_DELAY msecs_to_jiffies(2500) - -SSAM_DEFINE_SYNC_REQUEST_R(ssam_bas_query_opmode, u8, { - .target_category = SSAM_SSH_TC_BAS, - .target_id = 0x01, - .command_id = 0x0d, - .instance_id = 0x00, -}); - -#define SSAM_BAS_OPMODE_TABLET 0x00 -#define SSAM_EVENT_BAS_CID_CONNECTION 0x0c - -static int ssam_base_hub_query_state(struct ssam_hub *hub, enum ssam_hub_state *state) -{ - u8 opmode; - int status; - - status = ssam_retry(ssam_bas_query_opmode, hub->sdev->ctrl, &opmode); - if (status < 0) { - dev_err(&hub->sdev->dev, "failed to query base state: %d\n", status); - return status; - } - - if (opmode != SSAM_BAS_OPMODE_TABLET) - *state = SSAM_HUB_CONNECTED; - else - *state = SSAM_HUB_DISCONNECTED; - - return 0; -} - -static u32 ssam_base_hub_notif(struct ssam_event_notifier *nf, const struct ssam_event *event) -{ - struct ssam_hub *hub = container_of(nf, struct ssam_hub, notif); - - if (event->command_id != SSAM_EVENT_BAS_CID_CONNECTION) - return 0; - - if (event->length < 1) { - dev_err(&hub->sdev->dev, "unexpected payload size: %u\n", event->length); - return 0; - } - - ssam_hub_update(hub, event->data[0]); - - /* - * Do not return SSAM_NOTIF_HANDLED: The event should be picked up and - * consumed by the detachment system driver. We're just a (more or less) - * silent observer. - */ - return 0; -} - -static int ssam_base_hub_probe(struct ssam_device *sdev) -{ - struct ssam_hub *hub; - - hub = devm_kzalloc(&sdev->dev, sizeof(*hub), GFP_KERNEL); - if (!hub) - return -ENOMEM; - - hub->notif.base.priority = INT_MAX; /* This notifier should run first. */ - hub->notif.base.fn = ssam_base_hub_notif; - hub->notif.event.reg = SSAM_EVENT_REGISTRY_SAM; - hub->notif.event.id.target_category = SSAM_SSH_TC_BAS, - hub->notif.event.id.instance = 0, - hub->notif.event.mask = SSAM_EVENT_MASK_NONE; - hub->notif.event.flags = SSAM_EVENT_SEQUENCED; - - hub->connect_delay = SSAM_BASE_UPDATE_CONNECT_DELAY; - hub->get_state = ssam_base_hub_query_state; - - return ssam_hub_setup(sdev, hub); -} - -static const struct ssam_device_id ssam_base_hub_match[] = { - { SSAM_VDEV(HUB, 0x02, SSAM_SSH_TC_BAS, 0x00) }, - { }, -}; - -static struct ssam_device_driver ssam_base_hub_driver = { - .probe = ssam_base_hub_probe, - .remove = ssam_hub_remove, - .match_table = ssam_base_hub_match, - .driver = { - .name = "surface_aggregator_base_hub", - .probe_type = PROBE_PREFER_ASYNCHRONOUS, - .pm = &ssam_hub_pm_ops, - }, -}; - - -/* -- SSAM KIP-subsystem hub driver. ---------------------------------------- */ - -/* - * Some devices may need a bit of time to be fully usable after being - * (re-)connected. This delay has been determined via experimentation. - */ -#define SSAM_KIP_UPDATE_CONNECT_DELAY msecs_to_jiffies(250) - -#define SSAM_EVENT_KIP_CID_CONNECTION 0x2c - -SSAM_DEFINE_SYNC_REQUEST_R(__ssam_kip_get_connection_state, u8, { - .target_category = SSAM_SSH_TC_KIP, - .target_id = 0x01, - .command_id = 0x2c, - .instance_id = 0x00, -}); - -static int ssam_kip_get_connection_state(struct ssam_hub *hub, enum ssam_hub_state *state) -{ - int status; - u8 connected; - - status = ssam_retry(__ssam_kip_get_connection_state, hub->sdev->ctrl, &connected); - if (status < 0) { - dev_err(&hub->sdev->dev, "failed to query KIP connection state: %d\n", status); - return status; - } - - *state = connected ? SSAM_HUB_CONNECTED : SSAM_HUB_DISCONNECTED; - return 0; -} - -static u32 ssam_kip_hub_notif(struct ssam_event_notifier *nf, const struct ssam_event *event) -{ - struct ssam_hub *hub = container_of(nf, struct ssam_hub, notif); - - if (event->command_id != SSAM_EVENT_KIP_CID_CONNECTION) - return 0; /* Return "unhandled". */ - - if (event->length < 1) { - dev_err(&hub->sdev->dev, "unexpected payload size: %u\n", event->length); - return 0; - } - - ssam_hub_update(hub, event->data[0]); - return SSAM_NOTIF_HANDLED; -} - -static int ssam_kip_hub_probe(struct ssam_device *sdev) -{ - struct ssam_hub *hub; - - hub = devm_kzalloc(&sdev->dev, sizeof(*hub), GFP_KERNEL); - if (!hub) - return -ENOMEM; - - hub->notif.base.priority = INT_MAX; /* This notifier should run first. */ - hub->notif.base.fn = ssam_kip_hub_notif; - hub->notif.event.reg = SSAM_EVENT_REGISTRY_SAM; - hub->notif.event.id.target_category = SSAM_SSH_TC_KIP, - hub->notif.event.id.instance = 0, - hub->notif.event.mask = SSAM_EVENT_MASK_TARGET; - hub->notif.event.flags = SSAM_EVENT_SEQUENCED; - - hub->connect_delay = SSAM_KIP_UPDATE_CONNECT_DELAY; - hub->get_state = ssam_kip_get_connection_state; - - return ssam_hub_setup(sdev, hub); -} - -static const struct ssam_device_id ssam_kip_hub_match[] = { - { SSAM_VDEV(HUB, 0x01, SSAM_SSH_TC_KIP, 0x00) }, - { }, -}; - -static struct ssam_device_driver ssam_kip_hub_driver = { - .probe = ssam_kip_hub_probe, - .remove = ssam_hub_remove, - .match_table = ssam_kip_hub_match, - .driver = { - .name = "surface_kip_hub", - .probe_type = PROBE_PREFER_ASYNCHRONOUS, - .pm = &ssam_hub_pm_ops, - }, -}; - - /* -- SSAM platform/meta-hub driver. ---------------------------------------- */ static const struct acpi_device_id ssam_platform_hub_match[] = { @@ -727,44 +395,7 @@ static struct platform_driver ssam_platform_hub_driver = { .probe_type = PROBE_PREFER_ASYNCHRONOUS, }, }; - - -/* -- Module initialization. ------------------------------------------------ */ - -static int __init ssam_device_hub_init(void) -{ - int status; - - status = platform_driver_register(&ssam_platform_hub_driver); - if (status) - goto err_platform; - - status = ssam_device_driver_register(&ssam_base_hub_driver); - if (status) - goto err_base; - - status = ssam_device_driver_register(&ssam_kip_hub_driver); - if (status) - goto err_kip; - - return 0; - -err_kip: - ssam_device_driver_unregister(&ssam_base_hub_driver); -err_base: - platform_driver_unregister(&ssam_platform_hub_driver); -err_platform: - return status; -} -module_init(ssam_device_hub_init); - -static void __exit ssam_device_hub_exit(void) -{ - ssam_device_driver_unregister(&ssam_kip_hub_driver); - ssam_device_driver_unregister(&ssam_base_hub_driver); - platform_driver_unregister(&ssam_platform_hub_driver); -} -module_exit(ssam_device_hub_exit); +module_platform_driver(ssam_platform_hub_driver); MODULE_AUTHOR("Maximilian Luz "); MODULE_DESCRIPTION("Device-registry for Surface System Aggregator Module"); -- 2.37.2 From dc12b0fce0c41cf44f77a2643c972409ae51e1d3 Mon Sep 17 00:00:00 2001 From: Maximilian Luz Date: Fri, 24 Jun 2022 22:58:00 +0200 Subject: [PATCH] platform/surface: Update copyright year of various drivers Update the copyright of various Surface drivers to the current year. Signed-off-by: Maximilian Luz Link: https://lore.kernel.org/r/20220624205800.1355621-4-luzmaximilian@gmail.com Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede Patchset: surface-sam --- drivers/platform/surface/aggregator/Kconfig | 2 +- drivers/platform/surface/aggregator/Makefile | 2 +- drivers/platform/surface/aggregator/bus.c | 2 +- drivers/platform/surface/aggregator/bus.h | 2 +- drivers/platform/surface/aggregator/controller.c | 2 +- drivers/platform/surface/aggregator/controller.h | 2 +- drivers/platform/surface/aggregator/core.c | 2 +- drivers/platform/surface/aggregator/ssh_msgb.h | 2 +- drivers/platform/surface/aggregator/ssh_packet_layer.c | 2 +- drivers/platform/surface/aggregator/ssh_packet_layer.h | 2 +- drivers/platform/surface/aggregator/ssh_parser.c | 2 +- drivers/platform/surface/aggregator/ssh_parser.h | 2 +- drivers/platform/surface/aggregator/ssh_request_layer.c | 2 +- drivers/platform/surface/aggregator/ssh_request_layer.h | 2 +- drivers/platform/surface/aggregator/trace.h | 2 +- drivers/platform/surface/surface_acpi_notify.c | 2 +- drivers/platform/surface/surface_aggregator_cdev.c | 2 +- drivers/platform/surface/surface_aggregator_registry.c | 2 +- drivers/platform/surface/surface_dtx.c | 2 +- drivers/platform/surface/surface_gpe.c | 2 +- drivers/platform/surface/surface_hotplug.c | 2 +- drivers/platform/surface/surface_platform_profile.c | 2 +- 22 files changed, 22 insertions(+), 22 deletions(-) diff --git a/drivers/platform/surface/aggregator/Kconfig b/drivers/platform/surface/aggregator/Kconfig index cab020324256..c114f9dd5fe1 100644 --- a/drivers/platform/surface/aggregator/Kconfig +++ b/drivers/platform/surface/aggregator/Kconfig @@ -1,5 +1,5 @@ # SPDX-License-Identifier: GPL-2.0+ -# Copyright (C) 2019-2021 Maximilian Luz +# Copyright (C) 2019-2022 Maximilian Luz menuconfig SURFACE_AGGREGATOR tristate "Microsoft Surface System Aggregator Module Subsystem and Drivers" diff --git a/drivers/platform/surface/aggregator/Makefile b/drivers/platform/surface/aggregator/Makefile index c0d550eda5cd..fdf664a217f9 100644 --- a/drivers/platform/surface/aggregator/Makefile +++ b/drivers/platform/surface/aggregator/Makefile @@ -1,5 +1,5 @@ # SPDX-License-Identifier: GPL-2.0+ -# Copyright (C) 2019-2021 Maximilian Luz +# Copyright (C) 2019-2022 Maximilian Luz # For include/trace/define_trace.h to include trace.h CFLAGS_core.o = -I$(src) diff --git a/drivers/platform/surface/aggregator/bus.c b/drivers/platform/surface/aggregator/bus.c index e0b0381a2834..de539938896e 100644 --- a/drivers/platform/surface/aggregator/bus.c +++ b/drivers/platform/surface/aggregator/bus.c @@ -2,7 +2,7 @@ /* * Surface System Aggregator Module bus and device integration. * - * Copyright (C) 2019-2021 Maximilian Luz + * Copyright (C) 2019-2022 Maximilian Luz */ #include diff --git a/drivers/platform/surface/aggregator/bus.h b/drivers/platform/surface/aggregator/bus.h index 6964ee84e79c..5b4dbf21906c 100644 --- a/drivers/platform/surface/aggregator/bus.h +++ b/drivers/platform/surface/aggregator/bus.h @@ -2,7 +2,7 @@ /* * Surface System Aggregator Module bus and device integration. * - * Copyright (C) 2019-2021 Maximilian Luz + * Copyright (C) 2019-2022 Maximilian Luz */ #ifndef _SURFACE_AGGREGATOR_BUS_H diff --git a/drivers/platform/surface/aggregator/controller.c b/drivers/platform/surface/aggregator/controller.c index 6de834b52b63..43e765199137 100644 --- a/drivers/platform/surface/aggregator/controller.c +++ b/drivers/platform/surface/aggregator/controller.c @@ -2,7 +2,7 @@ /* * Main SSAM/SSH controller structure and functionality. * - * Copyright (C) 2019-2021 Maximilian Luz + * Copyright (C) 2019-2022 Maximilian Luz */ #include diff --git a/drivers/platform/surface/aggregator/controller.h b/drivers/platform/surface/aggregator/controller.h index a0963c3562ff..f0d987abc51e 100644 --- a/drivers/platform/surface/aggregator/controller.h +++ b/drivers/platform/surface/aggregator/controller.h @@ -2,7 +2,7 @@ /* * Main SSAM/SSH controller structure and functionality. * - * Copyright (C) 2019-2021 Maximilian Luz + * Copyright (C) 2019-2022 Maximilian Luz */ #ifndef _SURFACE_AGGREGATOR_CONTROLLER_H diff --git a/drivers/platform/surface/aggregator/core.c b/drivers/platform/surface/aggregator/core.c index a62c5dfe42d6..1a6373dea109 100644 --- a/drivers/platform/surface/aggregator/core.c +++ b/drivers/platform/surface/aggregator/core.c @@ -7,7 +7,7 @@ * Handles communication via requests as well as enabling, disabling, and * relaying of events. * - * Copyright (C) 2019-2021 Maximilian Luz + * Copyright (C) 2019-2022 Maximilian Luz */ #include diff --git a/drivers/platform/surface/aggregator/ssh_msgb.h b/drivers/platform/surface/aggregator/ssh_msgb.h index e562958ffdf0..f3ecad92eefd 100644 --- a/drivers/platform/surface/aggregator/ssh_msgb.h +++ b/drivers/platform/surface/aggregator/ssh_msgb.h @@ -2,7 +2,7 @@ /* * SSH message builder functions. * - * Copyright (C) 2019-2021 Maximilian Luz + * Copyright (C) 2019-2022 Maximilian Luz */ #ifndef _SURFACE_AGGREGATOR_SSH_MSGB_H diff --git a/drivers/platform/surface/aggregator/ssh_packet_layer.c b/drivers/platform/surface/aggregator/ssh_packet_layer.c index 8a4451c1ffe5..6748fe4ac5d5 100644 --- a/drivers/platform/surface/aggregator/ssh_packet_layer.c +++ b/drivers/platform/surface/aggregator/ssh_packet_layer.c @@ -2,7 +2,7 @@ /* * SSH packet transport layer. * - * Copyright (C) 2019-2021 Maximilian Luz + * Copyright (C) 2019-2022 Maximilian Luz */ #include diff --git a/drivers/platform/surface/aggregator/ssh_packet_layer.h b/drivers/platform/surface/aggregator/ssh_packet_layer.h index 2eb329f0b91a..64633522f971 100644 --- a/drivers/platform/surface/aggregator/ssh_packet_layer.h +++ b/drivers/platform/surface/aggregator/ssh_packet_layer.h @@ -2,7 +2,7 @@ /* * SSH packet transport layer. * - * Copyright (C) 2019-2021 Maximilian Luz + * Copyright (C) 2019-2022 Maximilian Luz */ #ifndef _SURFACE_AGGREGATOR_SSH_PACKET_LAYER_H diff --git a/drivers/platform/surface/aggregator/ssh_parser.c b/drivers/platform/surface/aggregator/ssh_parser.c index b77912f8f13b..a6f668694365 100644 --- a/drivers/platform/surface/aggregator/ssh_parser.c +++ b/drivers/platform/surface/aggregator/ssh_parser.c @@ -2,7 +2,7 @@ /* * SSH message parser. * - * Copyright (C) 2019-2021 Maximilian Luz + * Copyright (C) 2019-2022 Maximilian Luz */ #include diff --git a/drivers/platform/surface/aggregator/ssh_parser.h b/drivers/platform/surface/aggregator/ssh_parser.h index 3bd6e180fd16..801d8fa69fb5 100644 --- a/drivers/platform/surface/aggregator/ssh_parser.h +++ b/drivers/platform/surface/aggregator/ssh_parser.h @@ -2,7 +2,7 @@ /* * SSH message parser. * - * Copyright (C) 2019-2021 Maximilian Luz + * Copyright (C) 2019-2022 Maximilian Luz */ #ifndef _SURFACE_AGGREGATOR_SSH_PARSER_H diff --git a/drivers/platform/surface/aggregator/ssh_request_layer.c b/drivers/platform/surface/aggregator/ssh_request_layer.c index 790f7f0eee98..f5565570f16c 100644 --- a/drivers/platform/surface/aggregator/ssh_request_layer.c +++ b/drivers/platform/surface/aggregator/ssh_request_layer.c @@ -2,7 +2,7 @@ /* * SSH request transport layer. * - * Copyright (C) 2019-2021 Maximilian Luz + * Copyright (C) 2019-2022 Maximilian Luz */ #include diff --git a/drivers/platform/surface/aggregator/ssh_request_layer.h b/drivers/platform/surface/aggregator/ssh_request_layer.h index 9c3cbae2d4bd..4e387a031351 100644 --- a/drivers/platform/surface/aggregator/ssh_request_layer.h +++ b/drivers/platform/surface/aggregator/ssh_request_layer.h @@ -2,7 +2,7 @@ /* * SSH request transport layer. * - * Copyright (C) 2019-2021 Maximilian Luz + * Copyright (C) 2019-2022 Maximilian Luz */ #ifndef _SURFACE_AGGREGATOR_SSH_REQUEST_LAYER_H diff --git a/drivers/platform/surface/aggregator/trace.h b/drivers/platform/surface/aggregator/trace.h index cc9e73fbc18e..2a2c17771d01 100644 --- a/drivers/platform/surface/aggregator/trace.h +++ b/drivers/platform/surface/aggregator/trace.h @@ -2,7 +2,7 @@ /* * Trace points for SSAM/SSH. * - * Copyright (C) 2020-2021 Maximilian Luz + * Copyright (C) 2020-2022 Maximilian Luz */ #undef TRACE_SYSTEM diff --git a/drivers/platform/surface/surface_acpi_notify.c b/drivers/platform/surface/surface_acpi_notify.c index c0e12f0b9b79..44e317970557 100644 --- a/drivers/platform/surface/surface_acpi_notify.c +++ b/drivers/platform/surface/surface_acpi_notify.c @@ -8,7 +8,7 @@ * notifications sent from ACPI via the SAN interface by providing them to any * registered external driver. * - * Copyright (C) 2019-2020 Maximilian Luz + * Copyright (C) 2019-2022 Maximilian Luz */ #include diff --git a/drivers/platform/surface/surface_aggregator_cdev.c b/drivers/platform/surface/surface_aggregator_cdev.c index 30fb50fde450..492c82e69182 100644 --- a/drivers/platform/surface/surface_aggregator_cdev.c +++ b/drivers/platform/surface/surface_aggregator_cdev.c @@ -3,7 +3,7 @@ * Provides user-space access to the SSAM EC via the /dev/surface/aggregator * misc device. Intended for debugging and development. * - * Copyright (C) 2020-2021 Maximilian Luz + * Copyright (C) 2020-2022 Maximilian Luz */ #include diff --git a/drivers/platform/surface/surface_aggregator_registry.c b/drivers/platform/surface/surface_aggregator_registry.c index 0cbb7f3a6b2d..d5655f6a4a41 100644 --- a/drivers/platform/surface/surface_aggregator_registry.c +++ b/drivers/platform/surface/surface_aggregator_registry.c @@ -6,7 +6,7 @@ * cannot be auto-detected. Provides device-hubs and performs instantiation * for these devices. * - * Copyright (C) 2020-2021 Maximilian Luz + * Copyright (C) 2020-2022 Maximilian Luz */ #include diff --git a/drivers/platform/surface/surface_dtx.c b/drivers/platform/surface/surface_dtx.c index 1203b9a82993..ed36944467f9 100644 --- a/drivers/platform/surface/surface_dtx.c +++ b/drivers/platform/surface/surface_dtx.c @@ -8,7 +8,7 @@ * acknowledge (to speed things up), abort (e.g. in case the dGPU is still in * use), or request detachment via user-space. * - * Copyright (C) 2019-2021 Maximilian Luz + * Copyright (C) 2019-2022 Maximilian Luz */ #include diff --git a/drivers/platform/surface/surface_gpe.c b/drivers/platform/surface/surface_gpe.c index ec66fde28e75..27365cbe1ee9 100644 --- a/drivers/platform/surface/surface_gpe.c +++ b/drivers/platform/surface/surface_gpe.c @@ -4,7 +4,7 @@ * properly configuring the respective GPEs. Required for wakeup via lid on * newer Intel-based Microsoft Surface devices. * - * Copyright (C) 2020 Maximilian Luz + * Copyright (C) 2020-2022 Maximilian Luz */ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt diff --git a/drivers/platform/surface/surface_hotplug.c b/drivers/platform/surface/surface_hotplug.c index cfcc15cfbacb..f004a2495201 100644 --- a/drivers/platform/surface/surface_hotplug.c +++ b/drivers/platform/surface/surface_hotplug.c @@ -10,7 +10,7 @@ * Event signaling is handled via ACPI, which will generate the appropriate * device-check notifications to be picked up by the PCIe hot-plug driver. * - * Copyright (C) 2019-2021 Maximilian Luz + * Copyright (C) 2019-2022 Maximilian Luz */ #include diff --git a/drivers/platform/surface/surface_platform_profile.c b/drivers/platform/surface/surface_platform_profile.c index 6373d3b5eb7f..fbf2e11fd6ce 100644 --- a/drivers/platform/surface/surface_platform_profile.c +++ b/drivers/platform/surface/surface_platform_profile.c @@ -3,7 +3,7 @@ * Surface Platform Profile / Performance Mode driver for Surface System * Aggregator Module (thermal subsystem). * - * Copyright (C) 2021 Maximilian Luz + * Copyright (C) 2021-2022 Maximilian Luz */ #include -- 2.37.2 From 39bb758fc49805d68c4ad2a21b6011cc54179676 Mon Sep 17 00:00:00 2001 From: Lukas Bulwahn Date: Wed, 13 Jul 2022 06:09:16 +0200 Subject: [PATCH] MAINTAINERS: repair file entry in MICROSOFT SURFACE AGGREGATOR TABLET-MODE SWITCH Commit 9f794056db5b ("platform/surface: Add KIP/POS tablet-mode switch driver") adds the section MICROSOFT SURFACE AGGREGATOR TABLET-MODE SWITCH with a file entry, but the file that is added with this commit is actually named slightly differently. file entry name: drivers/platform/surface/surface_aggregator_tablet_switch.c added file name: drivers/platform/surface/surface_aggregator_tabletsw.c Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a broken reference. Repair this file entry to the actual file name added with the commit above. Fixes: 9f794056db5b ("platform/surface: Add KIP/POS tablet-mode switch driver") Signed-off-by: Lukas Bulwahn Reviewed-by: Andy Shevchenko Reviewed-by: Maximilian Luz Link: https://lore.kernel.org/r/20220713040916.1767-1-lukas.bulwahn@gmail.com Signed-off-by: Hans de Goede Patchset: surface-sam --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 55e80354a097..6772c9d0eccc 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -13303,7 +13303,7 @@ MICROSOFT SURFACE AGGREGATOR TABLET-MODE SWITCH M: Maximilian Luz L: platform-driver-x86@vger.kernel.org S: Maintained -F: drivers/platform/surface/surface_aggregator_tablet_switch.c +F: drivers/platform/surface/surface_aggregator_tabletsw.c MICROSOFT SURFACE BATTERY AND AC DRIVERS M: Maximilian Luz -- 2.37.2 From 513b085315b459e555c4cc2d4b4202d232dd4b26 Mon Sep 17 00:00:00 2001 From: Maximilian Luz Date: Sun, 17 Jul 2022 14:07:35 +0200 Subject: [PATCH] platform/surface: tabletsw: Fix __le32 integer access The sources.count field is a __le32 inside a packed struct. So use the proper functions to access it. Reported-by: kernel test robot Fixes: 9f794056db5b ("platform/surface: Add KIP/POS tablet-mode switch driver") Signed-off-by: Maximilian Luz Link: https://lore.kernel.org/r/20220717120735.2052160-1-luzmaximilian@gmail.com Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede Patchset: surface-sam --- drivers/platform/surface/surface_aggregator_tabletsw.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/platform/surface/surface_aggregator_tabletsw.c b/drivers/platform/surface/surface_aggregator_tabletsw.c index 596ca6c80681..27d95a6a7851 100644 --- a/drivers/platform/surface/surface_aggregator_tabletsw.c +++ b/drivers/platform/surface/surface_aggregator_tabletsw.c @@ -410,7 +410,7 @@ static int ssam_pos_get_source(struct ssam_tablet_sw *sw, u32 *source_id) if (status) return status; - if (sources.count == 0) { + if (get_unaligned_le32(&sources.count) == 0) { dev_err(&sw->sdev->dev, "no posture sources found\n"); return -ENODEV; } @@ -422,7 +422,7 @@ static int ssam_pos_get_source(struct ssam_tablet_sw *sw, u32 *source_id) * is a device that provides multiple sources, at which point we can * then try to figure out how to handle them. */ - WARN_ON(sources.count > 1); + WARN_ON(get_unaligned_le32(&sources.count) > 1); *source_id = get_unaligned_le32(&sources.id[0]); return 0; -- 2.37.2 From 3dfe5611833768dcceacd578f4c8a7e1efdc32e1 Mon Sep 17 00:00:00 2001 From: Maximilian Luz Date: Fri, 8 Jul 2022 03:34:44 +0200 Subject: [PATCH] platform/surface: aggregator_registry: Add support for Surface Laptop Go 2 The Surface Laptop Go 2 seems to have the same SAM client devices as the Surface Laptop Go 1, so re-use its node group. Signed-off-by: Maximilian Luz Patchset: surface-sam --- drivers/platform/surface/surface_aggregator_registry.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/platform/surface/surface_aggregator_registry.c b/drivers/platform/surface/surface_aggregator_registry.c index d5655f6a4a41..93ab62eb393d 100644 --- a/drivers/platform/surface/surface_aggregator_registry.c +++ b/drivers/platform/surface/surface_aggregator_registry.c @@ -325,6 +325,9 @@ static const struct acpi_device_id ssam_platform_hub_match[] = { /* Surface Laptop Go 1 */ { "MSHW0118", (unsigned long)ssam_node_group_slg1 }, + /* Surface Laptop Go 2 */ + { "MSHW0290", (unsigned long)ssam_node_group_slg1 }, + /* Surface Laptop Studio */ { "MSHW0123", (unsigned long)ssam_node_group_sls }, -- 2.37.2 From 1135c744bf81e6b3528fcddf0b18fbc8353fe7ff Mon Sep 17 00:00:00 2001 From: Maximilian Luz Date: Sat, 25 Jun 2022 20:42:00 +0200 Subject: [PATCH] platform/surface: aggregator_registry: Rename HID device nodes based on their function Rename HID device nodes based on their function. In particular, these are nodes for firmware updates via the CFU mechanism (component firmware update), HID based sensors, and a USB-C UCSI client. Signed-off-by: Maximilian Luz Patchset: surface-sam --- .../surface/surface_aggregator_registry.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/drivers/platform/surface/surface_aggregator_registry.c b/drivers/platform/surface/surface_aggregator_registry.c index 93ab62eb393d..7d82398f55b1 100644 --- a/drivers/platform/surface/surface_aggregator_registry.c +++ b/drivers/platform/surface/surface_aggregator_registry.c @@ -104,14 +104,14 @@ static const struct software_node ssam_node_hid_tid1_touchpad = { .parent = &ssam_node_root, }; -/* HID device instance 6 (TID1, unknown HID device). */ -static const struct software_node ssam_node_hid_tid1_iid6 = { +/* HID device instance 6 (TID1, HID sensor collection). */ +static const struct software_node ssam_node_hid_tid1_sensors = { .name = "ssam:01:15:01:06:00", .parent = &ssam_node_root, }; -/* HID device instance 7 (TID1, unknown HID device). */ -static const struct software_node ssam_node_hid_tid1_iid7 = { +/* HID device instance 7 (TID1, UCM UCSI HID client). */ +static const struct software_node ssam_node_hid_tid1_ucm_ucsi = { .name = "ssam:01:15:01:07:00", .parent = &ssam_node_root, }; @@ -182,8 +182,8 @@ static const struct software_node ssam_node_hid_kip_touchpad = { .parent = &ssam_node_hub_kip, }; -/* HID device instance 5 (KIP hub, unknown HID device). */ -static const struct software_node ssam_node_hid_kip_iid5 = { +/* HID device instance 5 (KIP hub, type-cover firmware update). */ +static const struct software_node ssam_node_hid_kip_fwupd = { .name = "ssam:01:15:02:05:00", .parent = &ssam_node_hub_kip, }; @@ -244,8 +244,8 @@ static const struct software_node *ssam_node_group_sls[] = { &ssam_node_hid_tid1_keyboard, &ssam_node_hid_tid1_penstash, &ssam_node_hid_tid1_touchpad, - &ssam_node_hid_tid1_iid6, - &ssam_node_hid_tid1_iid7, + &ssam_node_hid_tid1_sensors, + &ssam_node_hid_tid1_ucm_ucsi, &ssam_node_hid_tid1_sysctrl, NULL, }; @@ -278,7 +278,7 @@ static const struct software_node *ssam_node_group_sp8[] = { &ssam_node_hid_kip_keyboard, &ssam_node_hid_kip_penstash, &ssam_node_hid_kip_touchpad, - &ssam_node_hid_kip_iid5, + &ssam_node_hid_kip_fwupd, NULL, }; -- 2.37.2 From c6b04410f5383e56f768071a02811eec38027af5 Mon Sep 17 00:00:00 2001 From: Maximilian Luz Date: Sat, 25 Jun 2022 20:52:47 +0200 Subject: [PATCH] platform/surface: aggregator_registry: Rename HID device nodes based on new findings On Windows, the HID devices with target ID 1 are grouped as "Surface Hot Plug - SAM". Rename their device nodes in the registry to reflect that and update the comments accordingly. Signed-off-by: Maximilian Luz Patchset: surface-sam --- .../surface/surface_aggregator_registry.c | 36 +++++++++---------- 1 file changed, 18 insertions(+), 18 deletions(-) diff --git a/drivers/platform/surface/surface_aggregator_registry.c b/drivers/platform/surface/surface_aggregator_registry.c index 7d82398f55b1..9970f89b1411 100644 --- a/drivers/platform/surface/surface_aggregator_registry.c +++ b/drivers/platform/surface/surface_aggregator_registry.c @@ -86,38 +86,38 @@ static const struct software_node ssam_node_bas_dtx = { .parent = &ssam_node_root, }; -/* HID keyboard (TID1). */ -static const struct software_node ssam_node_hid_tid1_keyboard = { +/* HID keyboard (SAM, TID=1). */ +static const struct software_node ssam_node_hid_sam_keyboard = { .name = "ssam:01:15:01:01:00", .parent = &ssam_node_root, }; -/* HID pen stash (TID1; pen taken / stashed away evens). */ -static const struct software_node ssam_node_hid_tid1_penstash = { +/* HID pen stash (SAM, TID=1; pen taken / stashed away evens). */ +static const struct software_node ssam_node_hid_sam_penstash = { .name = "ssam:01:15:01:02:00", .parent = &ssam_node_root, }; -/* HID touchpad (TID1). */ -static const struct software_node ssam_node_hid_tid1_touchpad = { +/* HID touchpad (SAM, TID=1). */ +static const struct software_node ssam_node_hid_sam_touchpad = { .name = "ssam:01:15:01:03:00", .parent = &ssam_node_root, }; -/* HID device instance 6 (TID1, HID sensor collection). */ -static const struct software_node ssam_node_hid_tid1_sensors = { +/* HID device instance 6 (SAM, TID=1, HID sensor collection). */ +static const struct software_node ssam_node_hid_sam_sensors = { .name = "ssam:01:15:01:06:00", .parent = &ssam_node_root, }; -/* HID device instance 7 (TID1, UCM UCSI HID client). */ -static const struct software_node ssam_node_hid_tid1_ucm_ucsi = { +/* HID device instance 7 (SAM, TID=1, UCM UCSI HID client). */ +static const struct software_node ssam_node_hid_sam_ucm_ucsi = { .name = "ssam:01:15:01:07:00", .parent = &ssam_node_root, }; -/* HID system controls (TID1). */ -static const struct software_node ssam_node_hid_tid1_sysctrl = { +/* HID system controls (SAM, TID=1). */ +static const struct software_node ssam_node_hid_sam_sysctrl = { .name = "ssam:01:15:01:08:00", .parent = &ssam_node_root, }; @@ -241,12 +241,12 @@ static const struct software_node *ssam_node_group_sls[] = { &ssam_node_bat_main, &ssam_node_tmp_pprof, &ssam_node_pos_tablet_switch, - &ssam_node_hid_tid1_keyboard, - &ssam_node_hid_tid1_penstash, - &ssam_node_hid_tid1_touchpad, - &ssam_node_hid_tid1_sensors, - &ssam_node_hid_tid1_ucm_ucsi, - &ssam_node_hid_tid1_sysctrl, + &ssam_node_hid_sam_keyboard, + &ssam_node_hid_sam_penstash, + &ssam_node_hid_sam_touchpad, + &ssam_node_hid_sam_sensors, + &ssam_node_hid_sam_ucm_ucsi, + &ssam_node_hid_sam_sysctrl, NULL, }; -- 2.37.2 From 9aaa3d4912f9796d3658a8f035a23848dba33178 Mon Sep 17 00:00:00 2001 From: Maximilian Luz Date: Sat, 25 Jun 2022 20:54:59 +0200 Subject: [PATCH] platform/surface: aggregator_registry: Add HID devices for sensors and UCSI client to SP8 Add software nodes for the HID sensor collection and the UCM UCSI HID client to the Surface Pro 8. In contrast to the type-cover devices, these devices are directly attached to the SAM controller, without any hub. This enables support for HID-based sensors, including the ones used for automatic screen rotation, on the Surface Pro 8. Signed-off-by: Maximilian Luz Patchset: surface-sam --- drivers/platform/surface/surface_aggregator_registry.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/platform/surface/surface_aggregator_registry.c b/drivers/platform/surface/surface_aggregator_registry.c index 9970f89b1411..585911020cea 100644 --- a/drivers/platform/surface/surface_aggregator_registry.c +++ b/drivers/platform/surface/surface_aggregator_registry.c @@ -279,6 +279,8 @@ static const struct software_node *ssam_node_group_sp8[] = { &ssam_node_hid_kip_penstash, &ssam_node_hid_kip_touchpad, &ssam_node_hid_kip_fwupd, + &ssam_node_hid_sam_sensors, + &ssam_node_hid_sam_ucm_ucsi, NULL, }; -- 2.37.2 From 2db7d4411f43d57e45672872465d05b091af1ca4 Mon Sep 17 00:00:00 2001 From: Maximilian Luz Date: Sat, 25 Jul 2020 17:19:53 +0200 Subject: [PATCH] i2c: acpi: Implement RawBytes read access Microsoft Surface Pro 4 and Book 1 devices access the MSHW0030 I2C device via a generic serial bus operation region and RawBytes read access. On the Surface Book 1, this access is required to turn on (and off) the discrete GPU. Multiple things are to note here: a) The RawBytes access is device/driver dependent. The ACPI specification states: > Raw accesses assume that the writer has knowledge of the bus that > the access is made over and the device that is being accessed. The > protocol may only ensure that the buffer is transmitted to the > appropriate driver, but the driver must be able to interpret the > buffer to communicate to a register. Thus this implementation may likely not work on other devices accessing I2C via the RawBytes accessor type. b) The MSHW0030 I2C device is an HID-over-I2C device which seems to serve multiple functions: 1. It is the main access point for the legacy-type Surface Aggregator Module (also referred to as SAM-over-HID, as opposed to the newer SAM-over-SSH/UART). It has currently not been determined on how support for the legacy SAM should be implemented. Likely via a custom HID driver. 2. It seems to serve as the HID device for the Integrated Sensor Hub. This might complicate matters with regards to implementing a SAM-over-HID driver required by legacy SAM. In light of this, the simplest approach has been chosen for now. However, it may make more sense regarding breakage and compatibility to either provide functionality for replacing or enhancing the default operation region handler via some additional API functions, or even to completely blacklist MSHW0030 from the I2C core and provide a custom driver for it. Replacing/enhancing the default operation region handler would, however, either require some sort of secondary driver and access point for it, from which the new API functions would be called and the new handler (part) would be installed, or hard-coding them via some sort of quirk-like interface into the I2C core. Signed-off-by: Maximilian Luz Patchset: surface-sam-over-hid --- drivers/i2c/i2c-core-acpi.c | 35 +++++++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+) diff --git a/drivers/i2c/i2c-core-acpi.c b/drivers/i2c/i2c-core-acpi.c index 08b561f0709d..d7c397bce0f0 100644 --- a/drivers/i2c/i2c-core-acpi.c +++ b/drivers/i2c/i2c-core-acpi.c @@ -619,6 +619,28 @@ static int acpi_gsb_i2c_write_bytes(struct i2c_client *client, return (ret == 1) ? 0 : -EIO; } +static int acpi_gsb_i2c_write_raw_bytes(struct i2c_client *client, + u8 *data, u8 data_len) +{ + struct i2c_msg msgs[1]; + int ret = AE_OK; + + msgs[0].addr = client->addr; + msgs[0].flags = client->flags; + msgs[0].len = data_len + 1; + msgs[0].buf = data; + + ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); + + if (ret < 0) { + dev_err(&client->adapter->dev, "i2c write failed: %d\n", ret); + return ret; + } + + /* 1 transfer must have completed successfully */ + return (ret == 1) ? 0 : -EIO; +} + static acpi_status i2c_acpi_space_handler(u32 function, acpi_physical_address command, u32 bits, u64 *value64, @@ -720,6 +742,19 @@ i2c_acpi_space_handler(u32 function, acpi_physical_address command, } break; + case ACPI_GSB_ACCESS_ATTRIB_RAW_BYTES: + if (action == ACPI_READ) { + dev_warn(&adapter->dev, + "protocol 0x%02x not supported for client 0x%02x\n", + accessor_type, client->addr); + ret = AE_BAD_PARAMETER; + goto err; + } else { + status = acpi_gsb_i2c_write_raw_bytes(client, + gsb->data, info->access_length); + } + break; + default: dev_warn(&adapter->dev, "protocol 0x%02x not supported for client 0x%02x\n", accessor_type, client->addr); -- 2.37.2 From 1519f583848db6ea7fb0d648ef80c729760dd3f7 Mon Sep 17 00:00:00 2001 From: Maximilian Luz Date: Sat, 13 Feb 2021 16:41:18 +0100 Subject: [PATCH] platform/surface: Add driver for Surface Book 1 dGPU switch Add driver exposing the discrete GPU power-switch of the Microsoft Surface Book 1 to user-space. On the Surface Book 1, the dGPU power is controlled via the Surface System Aggregator Module (SAM). The specific SAM-over-HID command for this is exposed via ACPI. This module provides a simple driver exposing the ACPI call via a sysfs parameter to user-space, so that users can easily power-on/-off the dGPU. Patchset: surface-sam-over-hid --- drivers/platform/surface/Kconfig | 7 + drivers/platform/surface/Makefile | 1 + .../surface/surfacebook1_dgpu_switch.c | 162 ++++++++++++++++++ 3 files changed, 170 insertions(+) create mode 100644 drivers/platform/surface/surfacebook1_dgpu_switch.c diff --git a/drivers/platform/surface/Kconfig b/drivers/platform/surface/Kconfig index b629e82af97c..68656e8f309e 100644 --- a/drivers/platform/surface/Kconfig +++ b/drivers/platform/surface/Kconfig @@ -149,6 +149,13 @@ config SURFACE_AGGREGATOR_TABLET_SWITCH Select M or Y here, if you want to provide tablet-mode switch input events on the Surface Pro 8, Surface Pro X, and Surface Laptop Studio. +config SURFACE_BOOK1_DGPU_SWITCH + tristate "Surface Book 1 dGPU Switch Driver" + depends on SYSFS + help + This driver provides a sysfs switch to set the power-state of the + discrete GPU found on the Microsoft Surface Book 1. + config SURFACE_DTX tristate "Surface DTX (Detachment System) Driver" depends on SURFACE_AGGREGATOR diff --git a/drivers/platform/surface/Makefile b/drivers/platform/surface/Makefile index 53344330939b..7efcd0cdb532 100644 --- a/drivers/platform/surface/Makefile +++ b/drivers/platform/surface/Makefile @@ -12,6 +12,7 @@ obj-$(CONFIG_SURFACE_AGGREGATOR_CDEV) += surface_aggregator_cdev.o obj-$(CONFIG_SURFACE_AGGREGATOR_HUB) += surface_aggregator_hub.o obj-$(CONFIG_SURFACE_AGGREGATOR_REGISTRY) += surface_aggregator_registry.o obj-$(CONFIG_SURFACE_AGGREGATOR_TABLET_SWITCH) += surface_aggregator_tabletsw.o +obj-$(CONFIG_SURFACE_BOOK1_DGPU_SWITCH) += surfacebook1_dgpu_switch.o obj-$(CONFIG_SURFACE_DTX) += surface_dtx.o obj-$(CONFIG_SURFACE_GPE) += surface_gpe.o obj-$(CONFIG_SURFACE_HOTPLUG) += surface_hotplug.o diff --git a/drivers/platform/surface/surfacebook1_dgpu_switch.c b/drivers/platform/surface/surfacebook1_dgpu_switch.c new file mode 100644 index 000000000000..8b816ed8f35c --- /dev/null +++ b/drivers/platform/surface/surfacebook1_dgpu_switch.c @@ -0,0 +1,162 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include +#include +#include +#include + + +#ifdef pr_fmt +#undef pr_fmt +#endif +#define pr_fmt(fmt) "%s:%s: " fmt, KBUILD_MODNAME, __func__ + + +static const guid_t dgpu_sw_guid = GUID_INIT(0x6fd05c69, 0xcde3, 0x49f4, + 0x95, 0xed, 0xab, 0x16, 0x65, 0x49, 0x80, 0x35); + +#define DGPUSW_ACPI_PATH_DSM "\\_SB_.PCI0.LPCB.EC0_.VGBI" +#define DGPUSW_ACPI_PATH_HGON "\\_SB_.PCI0.RP05.HGON" +#define DGPUSW_ACPI_PATH_HGOF "\\_SB_.PCI0.RP05.HGOF" + + +static int sb1_dgpu_sw_dsmcall(void) +{ + union acpi_object *ret; + acpi_handle handle; + acpi_status status; + + status = acpi_get_handle(NULL, DGPUSW_ACPI_PATH_DSM, &handle); + if (status) + return -EINVAL; + + ret = acpi_evaluate_dsm_typed(handle, &dgpu_sw_guid, 1, 1, NULL, ACPI_TYPE_BUFFER); + if (!ret) + return -EINVAL; + + ACPI_FREE(ret); + return 0; +} + +static int sb1_dgpu_sw_hgon(void) +{ + struct acpi_buffer buf = {ACPI_ALLOCATE_BUFFER, NULL}; + acpi_status status; + + status = acpi_evaluate_object(NULL, DGPUSW_ACPI_PATH_HGON, NULL, &buf); + if (status) { + pr_err("failed to run HGON: %d\n", status); + return -EINVAL; + } + + if (buf.pointer) + ACPI_FREE(buf.pointer); + + pr_info("turned-on dGPU via HGON\n"); + return 0; +} + +static int sb1_dgpu_sw_hgof(void) +{ + struct acpi_buffer buf = {ACPI_ALLOCATE_BUFFER, NULL}; + acpi_status status; + + status = acpi_evaluate_object(NULL, DGPUSW_ACPI_PATH_HGOF, NULL, &buf); + if (status) { + pr_err("failed to run HGOF: %d\n", status); + return -EINVAL; + } + + if (buf.pointer) + ACPI_FREE(buf.pointer); + + pr_info("turned-off dGPU via HGOF\n"); + return 0; +} + + +static ssize_t dgpu_dsmcall_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t len) +{ + int status, value; + + status = kstrtoint(buf, 0, &value); + if (status < 0) + return status; + + if (value != 1) + return -EINVAL; + + status = sb1_dgpu_sw_dsmcall(); + + return status < 0 ? status : len; +} + +static ssize_t dgpu_power_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t len) +{ + bool power; + int status; + + status = kstrtobool(buf, &power); + if (status < 0) + return status; + + if (power) + status = sb1_dgpu_sw_hgon(); + else + status = sb1_dgpu_sw_hgof(); + + return status < 0 ? status : len; +} + +static DEVICE_ATTR_WO(dgpu_dsmcall); +static DEVICE_ATTR_WO(dgpu_power); + +static struct attribute *sb1_dgpu_sw_attrs[] = { + &dev_attr_dgpu_dsmcall.attr, + &dev_attr_dgpu_power.attr, + NULL, +}; + +static const struct attribute_group sb1_dgpu_sw_attr_group = { + .attrs = sb1_dgpu_sw_attrs, +}; + + +static int sb1_dgpu_sw_probe(struct platform_device *pdev) +{ + return sysfs_create_group(&pdev->dev.kobj, &sb1_dgpu_sw_attr_group); +} + +static int sb1_dgpu_sw_remove(struct platform_device *pdev) +{ + sysfs_remove_group(&pdev->dev.kobj, &sb1_dgpu_sw_attr_group); + return 0; +} + +/* + * The dGPU power seems to be actually handled by MSHW0040. However, that is + * also the power-/volume-button device with a mainline driver. So let's use + * MSHW0041 instead for now, which seems to be the LTCH (latch/DTX) device. + */ +static const struct acpi_device_id sb1_dgpu_sw_match[] = { + { "MSHW0041", }, + { }, +}; +MODULE_DEVICE_TABLE(acpi, sb1_dgpu_sw_match); + +static struct platform_driver sb1_dgpu_sw = { + .probe = sb1_dgpu_sw_probe, + .remove = sb1_dgpu_sw_remove, + .driver = { + .name = "surfacebook1_dgpu_switch", + .acpi_match_table = sb1_dgpu_sw_match, + .probe_type = PROBE_PREFER_ASYNCHRONOUS, + }, +}; +module_platform_driver(sb1_dgpu_sw); + +MODULE_AUTHOR("Maximilian Luz "); +MODULE_DESCRIPTION("Discrete GPU Power-Switch for Surface Book 1"); +MODULE_LICENSE("GPL"); -- 2.37.2 From 12ca17de985a65027d9264486f2fec28cfbf039b Mon Sep 17 00:00:00 2001 From: Sachi King Date: Tue, 5 Oct 2021 00:05:09 +1100 Subject: [PATCH] Input: soc_button_array - support AMD variant Surface devices The power button on the AMD variant of the Surface Laptop uses the same MSHW0040 device ID as the 5th and later generation of Surface devices, however they report 0 for their OEM platform revision. As the _DSM does not exist on the devices requiring special casing, check for the existance of the _DSM to determine if soc_button_array should be loaded. Fixes: c394159310d0 ("Input: soc_button_array - add support for newer surface devices") Co-developed-by: Maximilian Luz Signed-off-by: Sachi King Patchset: surface-button --- drivers/input/misc/soc_button_array.c | 33 +++++++-------------------- 1 file changed, 8 insertions(+), 25 deletions(-) diff --git a/drivers/input/misc/soc_button_array.c b/drivers/input/misc/soc_button_array.c index 480476121c01..36e1bf7b7a01 100644 --- a/drivers/input/misc/soc_button_array.c +++ b/drivers/input/misc/soc_button_array.c @@ -495,8 +495,8 @@ static const struct soc_device_data soc_device_MSHW0028 = { * Both, the Surface Pro 4 (surfacepro3_button.c) and the above mentioned * devices use MSHW0040 for power and volume buttons, however the way they * have to be addressed differs. Make sure that we only load this drivers - * for the correct devices by checking the OEM Platform Revision provided by - * the _DSM method. + * for the correct devices by checking if the OEM Platform Revision DSM call + * exists. */ #define MSHW0040_DSM_REVISION 0x01 #define MSHW0040_DSM_GET_OMPR 0x02 // get OEM Platform Revision @@ -507,31 +507,14 @@ static const guid_t MSHW0040_DSM_UUID = static int soc_device_check_MSHW0040(struct device *dev) { acpi_handle handle = ACPI_HANDLE(dev); - union acpi_object *result; - u64 oem_platform_rev = 0; // valid revisions are nonzero - - // get OEM platform revision - result = acpi_evaluate_dsm_typed(handle, &MSHW0040_DSM_UUID, - MSHW0040_DSM_REVISION, - MSHW0040_DSM_GET_OMPR, NULL, - ACPI_TYPE_INTEGER); - - if (result) { - oem_platform_rev = result->integer.value; - ACPI_FREE(result); - } - - /* - * If the revision is zero here, the _DSM evaluation has failed. This - * indicates that we have a Pro 4 or Book 1 and this driver should not - * be used. - */ - if (oem_platform_rev == 0) - return -ENODEV; + bool exists; - dev_dbg(dev, "OEM Platform Revision %llu\n", oem_platform_rev); + // check if OEM platform revision DSM call exists + exists = acpi_check_dsm(handle, &MSHW0040_DSM_UUID, + MSHW0040_DSM_REVISION, + BIT(MSHW0040_DSM_GET_OMPR)); - return 0; + return exists ? 0 : -ENODEV; } /* -- 2.37.2 From 038c419cb0686e9bc79e0d7117e6c0ab620ed083 Mon Sep 17 00:00:00 2001 From: Sachi King Date: Tue, 5 Oct 2021 00:22:57 +1100 Subject: [PATCH] platform/surface: surfacepro3_button: don't load on amd variant The AMD variant of the Surface Laptop report 0 for their OEM platform revision. The Surface devices that require the surfacepro3_button driver do not have the _DSM that gets the OEM platform revision. If the method does not exist, load surfacepro3_button. Fixes: 64dd243d7356 ("platform/x86: surfacepro3_button: Fix device check") Co-developed-by: Maximilian Luz Signed-off-by: Sachi King Patchset: surface-button --- drivers/platform/surface/surfacepro3_button.c | 30 ++++--------------- 1 file changed, 6 insertions(+), 24 deletions(-) diff --git a/drivers/platform/surface/surfacepro3_button.c b/drivers/platform/surface/surfacepro3_button.c index 242fb690dcaf..30eea54dbb47 100644 --- a/drivers/platform/surface/surfacepro3_button.c +++ b/drivers/platform/surface/surfacepro3_button.c @@ -149,7 +149,8 @@ static int surface_button_resume(struct device *dev) /* * Surface Pro 4 and Surface Book 2 / Surface Pro 2017 use the same device * ID (MSHW0040) for the power/volume buttons. Make sure this is the right - * device by checking for the _DSM method and OEM Platform Revision. + * device by checking for the _DSM method and OEM Platform Revision DSM + * function. * * Returns true if the driver should bind to this device, i.e. the device is * either MSWH0028 (Pro 3) or MSHW0040 on a Pro 4 or Book 1. @@ -157,30 +158,11 @@ static int surface_button_resume(struct device *dev) static bool surface_button_check_MSHW0040(struct acpi_device *dev) { acpi_handle handle = dev->handle; - union acpi_object *result; - u64 oem_platform_rev = 0; // valid revisions are nonzero - - // get OEM platform revision - result = acpi_evaluate_dsm_typed(handle, &MSHW0040_DSM_UUID, - MSHW0040_DSM_REVISION, - MSHW0040_DSM_GET_OMPR, - NULL, ACPI_TYPE_INTEGER); - - /* - * If evaluating the _DSM fails, the method is not present. This means - * that we have either MSHW0028 or MSHW0040 on Pro 4 or Book 1, so we - * should use this driver. We use revision 0 indicating it is - * unavailable. - */ - - if (result) { - oem_platform_rev = result->integer.value; - ACPI_FREE(result); - } - - dev_dbg(&dev->dev, "OEM Platform Revision %llu\n", oem_platform_rev); - return oem_platform_rev == 0; + // make sure that OEM platform revision DSM call does not exist + return !acpi_check_dsm(handle, &MSHW0040_DSM_UUID, + MSHW0040_DSM_REVISION, + BIT(MSHW0040_DSM_GET_OMPR)); } -- 2.37.2 From 46cf30ad2214c8a50498d44c97fb0d98acdf31ed Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Jonas=20Dre=C3=9Fler?= Date: Thu, 5 Nov 2020 13:09:45 +0100 Subject: [PATCH] hid/multitouch: Turn off Type Cover keyboard backlight when suspending The Type Cover for Microsoft Surface devices supports a special usb control request to disable or enable the built-in keyboard backlight. On Windows, this request happens when putting the device into suspend or resuming it, without it the backlight of the Type Cover will remain enabled for some time even though the computer is suspended, which looks weird to the user. So add support for this special usb control request to hid-multitouch, which is the driver that's handling the Type Cover. The reason we have to use a pm_notifier for this instead of the usual suspend/resume methods is that those won't get called in case the usb device is already autosuspended. Also, if the device is autosuspended, we have to briefly autoresume it in order to send the request. Doing that should be fine, the usb-core driver does something similar during suspend inside choose_wakeup(). To make sure we don't send that request to every device but only to devices which support it, add a new quirk MT_CLS_WIN_8_MS_SURFACE_TYPE_COVER to hid-multitouch. For now this quirk is only enabled for the usb id of the Surface Pro 2017 Type Cover, which is where I confirmed that it's working. Patchset: surface-typecover --- drivers/hid/hid-multitouch.c | 100 ++++++++++++++++++++++++++++++++++- 1 file changed, 98 insertions(+), 2 deletions(-) diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c index 2e72922e36f5..15f5f11c4b85 100644 --- a/drivers/hid/hid-multitouch.c +++ b/drivers/hid/hid-multitouch.c @@ -34,7 +34,10 @@ #include #include #include +#include #include +#include +#include #include #include #include @@ -47,6 +50,7 @@ MODULE_DESCRIPTION("HID multitouch panels"); MODULE_LICENSE("GPL"); #include "hid-ids.h" +#include "usbhid/usbhid.h" /* quirks to control the device */ #define MT_QUIRK_NOT_SEEN_MEANS_UP BIT(0) @@ -71,12 +75,15 @@ MODULE_LICENSE("GPL"); #define MT_QUIRK_SEPARATE_APP_REPORT BIT(19) #define MT_QUIRK_FORCE_MULTI_INPUT BIT(20) #define MT_QUIRK_DISABLE_WAKEUP BIT(21) +#define MT_QUIRK_HAS_TYPE_COVER_BACKLIGHT BIT(22) #define MT_INPUTMODE_TOUCHSCREEN 0x02 #define MT_INPUTMODE_TOUCHPAD 0x03 #define MT_BUTTONTYPE_CLICKPAD 0 +#define MS_TYPE_COVER_FEATURE_REPORT_USAGE 0xff050086 + enum latency_mode { HID_LATENCY_NORMAL = 0, HID_LATENCY_HIGH = 1, @@ -168,6 +175,8 @@ struct mt_device { struct list_head applications; struct list_head reports; + + struct notifier_block pm_notifier; }; static void mt_post_parse_default_settings(struct mt_device *td, @@ -212,6 +221,7 @@ static void mt_post_parse(struct mt_device *td, struct mt_application *app); #define MT_CLS_GOOGLE 0x0111 #define MT_CLS_RAZER_BLADE_STEALTH 0x0112 #define MT_CLS_SMART_TECH 0x0113 +#define MT_CLS_WIN_8_MS_SURFACE_TYPE_COVER 0x0114 #define MT_DEFAULT_MAXCONTACT 10 #define MT_MAX_MAXCONTACT 250 @@ -396,6 +406,16 @@ static const struct mt_class mt_classes[] = { MT_QUIRK_CONTACT_CNT_ACCURATE | MT_QUIRK_SEPARATE_APP_REPORT, }, + { .name = MT_CLS_WIN_8_MS_SURFACE_TYPE_COVER, + .quirks = MT_QUIRK_HAS_TYPE_COVER_BACKLIGHT | + MT_QUIRK_ALWAYS_VALID | + MT_QUIRK_IGNORE_DUPLICATES | + MT_QUIRK_HOVERING | + MT_QUIRK_CONTACT_CNT_ACCURATE | + MT_QUIRK_STICKY_FINGERS | + MT_QUIRK_WIN8_PTP_BUTTONS, + .export_all_inputs = true + }, { } }; @@ -1706,6 +1726,69 @@ static void mt_expired_timeout(struct timer_list *t) clear_bit(MT_IO_FLAGS_RUNNING, &td->mt_io_flags); } +static void get_type_cover_backlight_field(struct hid_device *hdev, + struct hid_field **field) +{ + struct hid_report_enum *rep_enum; + struct hid_report *rep; + struct hid_field *cur_field; + int i, j; + + rep_enum = &hdev->report_enum[HID_FEATURE_REPORT]; + list_for_each_entry(rep, &rep_enum->report_list, list) { + for (i = 0; i < rep->maxfield; i++) { + cur_field = rep->field[i]; + + for (j = 0; j < cur_field->maxusage; j++) { + if (cur_field->usage[j].hid + == MS_TYPE_COVER_FEATURE_REPORT_USAGE) { + *field = cur_field; + return; + } + } + } + } +} + +static void update_keyboard_backlight(struct hid_device *hdev, bool enabled) +{ + struct usb_device *udev = hid_to_usb_dev(hdev); + struct hid_field *field = NULL; + + /* Wake up the device in case it's already suspended */ + pm_runtime_get_sync(&udev->dev); + + get_type_cover_backlight_field(hdev, &field); + if (!field) { + hid_err(hdev, "couldn't find backlight field\n"); + goto out; + } + + field->value[field->index] = enabled ? 0x01ff00ff : 0x00ff00ff; + hid_hw_request(hdev, field->report, HID_REQ_SET_REPORT); + +out: + pm_runtime_put_sync(&udev->dev); +} + +static int mt_pm_notifier(struct notifier_block *notifier, + unsigned long pm_event, + void *unused) +{ + struct mt_device *td = + container_of(notifier, struct mt_device, pm_notifier); + struct hid_device *hdev = td->hdev; + + if (td->mtclass.quirks & MT_QUIRK_HAS_TYPE_COVER_BACKLIGHT) { + if (pm_event == PM_SUSPEND_PREPARE) + update_keyboard_backlight(hdev, 0); + else if (pm_event == PM_POST_SUSPEND) + update_keyboard_backlight(hdev, 1); + } + + return NOTIFY_DONE; +} + static int mt_probe(struct hid_device *hdev, const struct hid_device_id *id) { int ret, i; @@ -1729,6 +1812,9 @@ static int mt_probe(struct hid_device *hdev, const struct hid_device_id *id) td->inputmode_value = MT_INPUTMODE_TOUCHSCREEN; hid_set_drvdata(hdev, td); + td->pm_notifier.notifier_call = mt_pm_notifier; + register_pm_notifier(&td->pm_notifier); + INIT_LIST_HEAD(&td->applications); INIT_LIST_HEAD(&td->reports); @@ -1758,15 +1844,19 @@ static int mt_probe(struct hid_device *hdev, const struct hid_device_id *id) timer_setup(&td->release_timer, mt_expired_timeout, 0); ret = hid_parse(hdev); - if (ret != 0) + if (ret != 0) { + unregister_pm_notifier(&td->pm_notifier); return ret; + } if (mtclass->quirks & MT_QUIRK_FIX_CONST_CONTACT_ID) mt_fix_const_fields(hdev, HID_DG_CONTACTID); ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT); - if (ret) + if (ret) { + unregister_pm_notifier(&td->pm_notifier); return ret; + } ret = sysfs_create_group(&hdev->dev.kobj, &mt_attribute_group); if (ret) @@ -1818,6 +1908,7 @@ static void mt_remove(struct hid_device *hdev) { struct mt_device *td = hid_get_drvdata(hdev); + unregister_pm_notifier(&td->pm_notifier); del_timer_sync(&td->release_timer); sysfs_remove_group(&hdev->dev.kobj, &mt_attribute_group); @@ -2191,6 +2282,11 @@ static const struct hid_device_id mt_devices[] = { MT_USB_DEVICE(USB_VENDOR_ID_XIROKU, USB_DEVICE_ID_XIROKU_CSR2) }, + /* Microsoft Surface type cover */ + { .driver_data = MT_CLS_WIN_8_MS_SURFACE_TYPE_COVER, + HID_DEVICE(HID_BUS_ANY, HID_GROUP_ANY, + USB_VENDOR_ID_MICROSOFT, 0x09c0) }, + /* Google MT devices */ { .driver_data = MT_CLS_GOOGLE, HID_DEVICE(HID_BUS_ANY, HID_GROUP_ANY, USB_VENDOR_ID_GOOGLE, -- 2.37.2 From 61e311a6ce7fc4c4005130e4b3cce203f7ded406 Mon Sep 17 00:00:00 2001 From: PJungkamp Date: Fri, 25 Feb 2022 12:04:25 +0100 Subject: [PATCH] hid/multitouch: Add support for surface pro type cover tablet switch The Surface Pro Type Cover has several non standard HID usages in it's hid report descriptor. I noticed that, upon folding the typecover back, a vendor specific range of 4 32 bit integer hid usages is transmitted. Only the first byte of the message seems to convey reliable information about the keyboard state. 0x22 => Normal (keys enabled) 0x33 => Folded back (keys disabled) 0x53 => Rotated left/right side up (keys disabled) 0x13 => Cover closed (keys disabled) 0x43 => Folded back and Tablet upside down (keys disabled) This list may not be exhaustive. The tablet mode switch will be disabled for a value of 0x22 and enabled on any other value. Patchset: surface-typecover --- drivers/hid/hid-multitouch.c | 148 +++++++++++++++++++++++++++++------ 1 file changed, 122 insertions(+), 26 deletions(-) diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c index 15f5f11c4b85..69202575ce19 100644 --- a/drivers/hid/hid-multitouch.c +++ b/drivers/hid/hid-multitouch.c @@ -76,6 +76,7 @@ MODULE_LICENSE("GPL"); #define MT_QUIRK_FORCE_MULTI_INPUT BIT(20) #define MT_QUIRK_DISABLE_WAKEUP BIT(21) #define MT_QUIRK_HAS_TYPE_COVER_BACKLIGHT BIT(22) +#define MT_QUIRK_HAS_TYPE_COVER_TABLET_MODE_SWITCH BIT(23) #define MT_INPUTMODE_TOUCHSCREEN 0x02 #define MT_INPUTMODE_TOUCHPAD 0x03 @@ -83,6 +84,8 @@ MODULE_LICENSE("GPL"); #define MT_BUTTONTYPE_CLICKPAD 0 #define MS_TYPE_COVER_FEATURE_REPORT_USAGE 0xff050086 +#define MS_TYPE_COVER_TABLET_MODE_SWITCH_USAGE 0xff050072 +#define MS_TYPE_COVER_APPLICATION 0xff050050 enum latency_mode { HID_LATENCY_NORMAL = 0, @@ -408,6 +411,7 @@ static const struct mt_class mt_classes[] = { }, { .name = MT_CLS_WIN_8_MS_SURFACE_TYPE_COVER, .quirks = MT_QUIRK_HAS_TYPE_COVER_BACKLIGHT | + MT_QUIRK_HAS_TYPE_COVER_TABLET_MODE_SWITCH | MT_QUIRK_ALWAYS_VALID | MT_QUIRK_IGNORE_DUPLICATES | MT_QUIRK_HOVERING | @@ -1368,6 +1372,9 @@ static int mt_input_mapping(struct hid_device *hdev, struct hid_input *hi, field->application != HID_CP_CONSUMER_CONTROL && field->application != HID_GD_WIRELESS_RADIO_CTLS && field->application != HID_GD_SYSTEM_MULTIAXIS && + !(field->application == MS_TYPE_COVER_APPLICATION && + application->quirks & MT_QUIRK_HAS_TYPE_COVER_TABLET_MODE_SWITCH && + usage->hid == MS_TYPE_COVER_TABLET_MODE_SWITCH_USAGE) && !(field->application == HID_VD_ASUS_CUSTOM_MEDIA_KEYS && application->quirks & MT_QUIRK_ASUS_CUSTOM_UP)) return -1; @@ -1395,6 +1402,21 @@ static int mt_input_mapping(struct hid_device *hdev, struct hid_input *hi, return 1; } + /* + * The Microsoft Surface Pro Typecover has a non-standard HID + * tablet mode switch on a vendor specific usage page with vendor + * specific usage. + */ + if (field->application == MS_TYPE_COVER_APPLICATION && + application->quirks & MT_QUIRK_HAS_TYPE_COVER_TABLET_MODE_SWITCH && + usage->hid == MS_TYPE_COVER_TABLET_MODE_SWITCH_USAGE) { + usage->type = EV_SW; + usage->code = SW_TABLET_MODE; + *max = SW_MAX; + *bit = hi->input->swbit; + return 1; + } + if (rdata->is_mt_collection) return mt_touch_input_mapping(hdev, hi, field, usage, bit, max, application); @@ -1416,6 +1438,7 @@ static int mt_input_mapped(struct hid_device *hdev, struct hid_input *hi, { struct mt_device *td = hid_get_drvdata(hdev); struct mt_report_data *rdata; + struct input_dev *input; rdata = mt_find_report_data(td, field->report); if (rdata && rdata->is_mt_collection) { @@ -1423,6 +1446,19 @@ static int mt_input_mapped(struct hid_device *hdev, struct hid_input *hi, return -1; } + /* + * We own an input device which acts as a tablet mode switch for + * the Surface Pro Typecover. + */ + if (field->application == MS_TYPE_COVER_APPLICATION && + rdata->application->quirks & MT_QUIRK_HAS_TYPE_COVER_TABLET_MODE_SWITCH && + usage->hid == MS_TYPE_COVER_TABLET_MODE_SWITCH_USAGE) { + input = hi->input; + input_set_capability(input, EV_SW, SW_TABLET_MODE); + input_report_switch(input, SW_TABLET_MODE, 0); + return -1; + } + /* let hid-core decide for the others */ return 0; } @@ -1432,11 +1468,21 @@ static int mt_event(struct hid_device *hid, struct hid_field *field, { struct mt_device *td = hid_get_drvdata(hid); struct mt_report_data *rdata; + struct input_dev *input; rdata = mt_find_report_data(td, field->report); if (rdata && rdata->is_mt_collection) return mt_touch_event(hid, field, usage, value); + if (field->application == MS_TYPE_COVER_APPLICATION && + rdata->application->quirks & MT_QUIRK_HAS_TYPE_COVER_TABLET_MODE_SWITCH && + usage->hid == MS_TYPE_COVER_TABLET_MODE_SWITCH_USAGE) { + input = field->hidinput->input; + input_report_switch(input, SW_TABLET_MODE, (value & 0xFF) != 0x22); + input_sync(input); + return 1; + } + return 0; } @@ -1589,6 +1635,42 @@ static void mt_post_parse(struct mt_device *td, struct mt_application *app) app->quirks &= ~MT_QUIRK_CONTACT_CNT_ACCURATE; } +static int get_type_cover_field(struct hid_report_enum *rep_enum, + struct hid_field **field, int usage) +{ + struct hid_report *rep; + struct hid_field *cur_field; + int i, j; + + list_for_each_entry(rep, &rep_enum->report_list, list) { + for (i = 0; i < rep->maxfield; i++) { + cur_field = rep->field[i]; + if (cur_field->application != MS_TYPE_COVER_APPLICATION) + continue; + for (j = 0; j < cur_field->maxusage; j++) { + if (cur_field->usage[j].hid == usage) { + *field = cur_field; + return true; + } + } + } + } + return false; +} + +static void request_type_cover_tablet_mode_switch(struct hid_device *hdev) +{ + struct hid_field *field; + + if (get_type_cover_field(&hdev->report_enum[HID_INPUT_REPORT], + &field, + MS_TYPE_COVER_TABLET_MODE_SWITCH_USAGE)) { + hid_hw_request(hdev, field->report, HID_REQ_GET_REPORT); + } else { + hid_err(hdev, "couldn't find tablet mode field\n"); + } +} + static int mt_input_configured(struct hid_device *hdev, struct hid_input *hi) { struct mt_device *td = hid_get_drvdata(hdev); @@ -1638,6 +1720,13 @@ static int mt_input_configured(struct hid_device *hdev, struct hid_input *hi) /* force BTN_STYLUS to allow tablet matching in udev */ __set_bit(BTN_STYLUS, hi->input->keybit); break; + case MS_TYPE_COVER_APPLICATION: + if (td->mtclass.quirks & MT_QUIRK_HAS_TYPE_COVER_TABLET_MODE_SWITCH) { + suffix = "Tablet Mode Switch"; + request_type_cover_tablet_mode_switch(hdev); + break; + } + fallthrough; default: suffix = "UNKNOWN"; break; @@ -1726,30 +1815,6 @@ static void mt_expired_timeout(struct timer_list *t) clear_bit(MT_IO_FLAGS_RUNNING, &td->mt_io_flags); } -static void get_type_cover_backlight_field(struct hid_device *hdev, - struct hid_field **field) -{ - struct hid_report_enum *rep_enum; - struct hid_report *rep; - struct hid_field *cur_field; - int i, j; - - rep_enum = &hdev->report_enum[HID_FEATURE_REPORT]; - list_for_each_entry(rep, &rep_enum->report_list, list) { - for (i = 0; i < rep->maxfield; i++) { - cur_field = rep->field[i]; - - for (j = 0; j < cur_field->maxusage; j++) { - if (cur_field->usage[j].hid - == MS_TYPE_COVER_FEATURE_REPORT_USAGE) { - *field = cur_field; - return; - } - } - } - } -} - static void update_keyboard_backlight(struct hid_device *hdev, bool enabled) { struct usb_device *udev = hid_to_usb_dev(hdev); @@ -1758,8 +1823,9 @@ static void update_keyboard_backlight(struct hid_device *hdev, bool enabled) /* Wake up the device in case it's already suspended */ pm_runtime_get_sync(&udev->dev); - get_type_cover_backlight_field(hdev, &field); - if (!field) { + if (!get_type_cover_field(&hdev->report_enum[HID_FEATURE_REPORT], + &field, + MS_TYPE_COVER_FEATURE_REPORT_USAGE)) { hid_err(hdev, "couldn't find backlight field\n"); goto out; } @@ -1885,13 +1951,24 @@ static int mt_suspend(struct hid_device *hdev, pm_message_t state) static int mt_reset_resume(struct hid_device *hdev) { + struct mt_device *td = hid_get_drvdata(hdev); + mt_release_contacts(hdev); mt_set_modes(hdev, HID_LATENCY_NORMAL, true, true); + + /* Request an update on the typecover folding state on resume + * after reset. + */ + if (td->mtclass.quirks & MT_QUIRK_HAS_TYPE_COVER_TABLET_MODE_SWITCH) + request_type_cover_tablet_mode_switch(hdev); + return 0; } static int mt_resume(struct hid_device *hdev) { + struct mt_device *td = hid_get_drvdata(hdev); + /* Some Elan legacy devices require SET_IDLE to be set on resume. * It should be safe to send it to other devices too. * Tested on 3M, Stantum, Cypress, Zytronic, eGalax, and Elan panels. */ @@ -1900,6 +1977,10 @@ static int mt_resume(struct hid_device *hdev) mt_set_modes(hdev, HID_LATENCY_NORMAL, true, true); + /* Request an update on the typecover folding state on resume. */ + if (td->mtclass.quirks & MT_QUIRK_HAS_TYPE_COVER_TABLET_MODE_SWITCH) + request_type_cover_tablet_mode_switch(hdev); + return 0; } #endif @@ -1907,6 +1988,21 @@ static int mt_resume(struct hid_device *hdev) static void mt_remove(struct hid_device *hdev) { struct mt_device *td = hid_get_drvdata(hdev); + struct hid_field *field; + struct input_dev *input; + + /* Reset tablet mode switch on disconnect. */ + if (td->mtclass.quirks & MT_QUIRK_HAS_TYPE_COVER_TABLET_MODE_SWITCH) { + if (get_type_cover_field(&hdev->report_enum[HID_INPUT_REPORT], + &field, + MS_TYPE_COVER_TABLET_MODE_SWITCH_USAGE)) { + input = field->hidinput->input; + input_report_switch(input, SW_TABLET_MODE, 0); + input_sync(input); + } else { + hid_err(hdev, "couldn't find tablet mode field\n"); + } + } unregister_pm_notifier(&td->pm_notifier); del_timer_sync(&td->release_timer); -- 2.37.2 From a5bfc31f5a78d54ef1aad12ef12ec65242e539a4 Mon Sep 17 00:00:00 2001 From: Maximilian Luz Date: Thu, 21 Jul 2022 14:11:20 +0200 Subject: [PATCH] platform/surface: gpe: Add support for 13" Intel version of Surface Laptop 4 The 13" Intel version of the Surface Laptop 4 uses the same GPE as the Surface Laptop Studio for wakeups via the lid. Set it up accordingly. Signed-off-by: Maximilian Luz Link: https://lore.kernel.org/r/20220721121120.2002430-1-luzmaximilian@gmail.com Signed-off-by: Hans de Goede Patchset: surface-gpe --- drivers/platform/surface/surface_gpe.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/platform/surface/surface_gpe.c b/drivers/platform/surface/surface_gpe.c index 27365cbe1ee9..c219b840d491 100644 --- a/drivers/platform/surface/surface_gpe.c +++ b/drivers/platform/surface/surface_gpe.c @@ -171,6 +171,18 @@ static const struct dmi_system_id dmi_lid_device_table[] = { }, .driver_data = (void *)lid_device_props_l4D, }, + { + .ident = "Surface Laptop 4 (Intel 13\")", + .matches = { + /* + * We match for SKU here due to different variants: The + * AMD (15") version does not rely on GPEs. + */ + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"), + DMI_EXACT_MATCH(DMI_PRODUCT_SKU, "Surface_Laptop_4_1950:1951"), + }, + .driver_data = (void *)lid_device_props_l4B, + }, { .ident = "Surface Laptop Studio", .matches = { -- 2.37.2 From 0a3646496fbd99f59d21a0f4624b9bed7c4579ce Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 10 Oct 2021 20:56:57 +0200 Subject: [PATCH] ACPI: delay enumeration of devices with a _DEP pointing to an INT3472 device The clk and regulator frameworks expect clk/regulator consumer-devices to have info about the consumed clks/regulators described in the device's fw_node. To work around cases where this info is not present in the firmware tables, which is often the case on x86/ACPI devices, both frameworks allow the provider-driver to attach info about consumers to the clks/regulators when registering these. This causes problems with the probe ordering wrt drivers for consumers of these clks/regulators. Since the lookups are only registered when the provider-driver binds, trying to get these clks/regulators before then results in a -ENOENT error for clks and a dummy regulator for regulators. One case where we hit this issue is camera sensors such as e.g. the OV8865 sensor found on the Microsoft Surface Go. The sensor uses clks, regulators and GPIOs provided by a TPS68470 PMIC which is described in an INT3472 ACPI device. There is special platform code handling this and setting platform_data with the necessary consumer info on the MFD cells instantiated for the PMIC under: drivers/platform/x86/intel/int3472. For this to work properly the ov8865 driver must not bind to the I2C-client for the OV8865 sensor until after the TPS68470 PMIC gpio, regulator and clk MFD cells have all been fully setup. The OV8865 on the Microsoft Surface Go is just one example, all X86 devices using the Intel IPU3 camera block found on recent Intel SoCs have similar issues where there is an INT3472 HID ACPI-device, which describes the clks and regulators, and the driver for this INT3472 device must be fully initialized before the sensor driver (any sensor driver) binds for things to work properly. On these devices the ACPI nodes describing the sensors all have a _DEP dependency on the matching INT3472 ACPI device (there is one per sensor). This allows solving the probe-ordering problem by delaying the enumeration (instantiation of the I2C-client in the ov8865 example) of ACPI-devices which have a _DEP dependency on an INT3472 device. The new acpi_dev_ready_for_enumeration() helper used for this is also exported because for devices, which have the enumeration_by_parent flag set, the parent-driver will do its own scan of child ACPI devices and it will try to enumerate those during its probe(). Code doing this such as e.g. the i2c-core-acpi.c code must call this new helper to ensure that it too delays the enumeration until all the _DEP dependencies are met on devices which have the new honor_deps flag set. Signed-off-by: Hans de Goede Patchset: cameras --- drivers/acpi/scan.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index 762b61f67e6c..2c0f39a7f2a1 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -2122,6 +2122,9 @@ static acpi_status acpi_bus_check_add_2(acpi_handle handle, u32 lvl_not_used, static void acpi_default_enumeration(struct acpi_device *device) { + if (!acpi_dev_ready_for_enumeration(device)) + return; + /* * Do not enumerate devices with enumeration_by_parent flag set as * they will be enumerated by their respective parents. -- 2.37.2 From 04d11d2e49fd47c81ae37ee09acdbf2e485c0660 Mon Sep 17 00:00:00 2001 From: zouxiaoh Date: Fri, 25 Jun 2021 08:52:59 +0800 Subject: [PATCH] iommu: intel-ipu: use IOMMU passthrough mode for Intel IPUs Intel IPU(Image Processing Unit) has its own (IO)MMU hardware, The IPU driver allocates its own page table that is not mapped via the DMA, and thus the Intel IOMMU driver blocks access giving this error: DMAR: DRHD: handling fault status reg 3 DMAR: [DMA Read] Request device [00:05.0] PASID ffffffff fault addr 76406000 [fault reason 06] PTE Read access is not set As IPU is not an external facing device which is not risky, so use IOMMU passthrough mode for Intel IPUs. Change-Id: I6dcccdadac308cf42e20a18e1b593381391e3e6b Depends-On: Iacd67578e8c6a9b9ac73285f52b4081b72fb68a6 Tracked-On: #JIITL8-411 Signed-off-by: Bingbu Cao Signed-off-by: zouxiaoh Signed-off-by: Xu Chongyang Patchset: cameras --- drivers/iommu/intel/iommu.c | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c index 825b524e81f3..095d566c058f 100644 --- a/drivers/iommu/intel/iommu.c +++ b/drivers/iommu/intel/iommu.c @@ -37,6 +37,12 @@ #define IS_GFX_DEVICE(pdev) ((pdev->class >> 16) == PCI_BASE_CLASS_DISPLAY) #define IS_USB_DEVICE(pdev) ((pdev->class >> 8) == PCI_CLASS_SERIAL_USB) #define IS_ISA_DEVICE(pdev) ((pdev->class >> 8) == PCI_CLASS_BRIDGE_ISA) +#define IS_INTEL_IPU(pdev) ((pdev)->vendor == PCI_VENDOR_ID_INTEL && \ + ((pdev)->device == 0x9a19 || \ + (pdev)->device == 0x9a39 || \ + (pdev)->device == 0x4e19 || \ + (pdev)->device == 0x465d || \ + (pdev)->device == 0x1919)) #define IS_IPTS(pdev) ((pdev)->vendor == PCI_VENDOR_ID_INTEL && \ ((pdev)->device == 0x9d3e)) #define IS_AZALIA(pdev) ((pdev)->vendor == 0x8086 && (pdev)->device == 0x3a3e) @@ -310,12 +316,14 @@ EXPORT_SYMBOL_GPL(intel_iommu_enabled); static int dmar_map_gfx = 1; static int dmar_map_ipts = 1; +static int dmar_map_ipu = 1; static int intel_iommu_superpage = 1; static int iommu_identity_mapping; static int iommu_skip_te_disable; #define IDENTMAP_GFX 2 #define IDENTMAP_AZALIA 4 +#define IDENTMAP_IPU 8 #define IDENTMAP_IPTS 16 int intel_iommu_gfx_mapped; @@ -2664,6 +2672,9 @@ static int device_def_domain_type(struct device *dev) if ((iommu_identity_mapping & IDENTMAP_GFX) && IS_GFX_DEVICE(pdev)) return IOMMU_DOMAIN_IDENTITY; + if ((iommu_identity_mapping & IDENTMAP_IPU) && IS_INTEL_IPU(pdev)) + return IOMMU_DOMAIN_IDENTITY; + if ((iommu_identity_mapping & IDENTMAP_IPTS) && IS_IPTS(pdev)) return IOMMU_DOMAIN_IDENTITY; } @@ -3102,6 +3113,9 @@ static int __init init_dmars(void) if (!dmar_map_gfx) iommu_identity_mapping |= IDENTMAP_GFX; + if (!dmar_map_ipu) + iommu_identity_mapping |= IDENTMAP_IPU; + if (!dmar_map_ipts) iommu_identity_mapping |= IDENTMAP_IPTS; @@ -4933,6 +4947,18 @@ static void quirk_iommu_igfx(struct pci_dev *dev) dmar_map_gfx = 0; } +static void quirk_iommu_ipu(struct pci_dev *dev) +{ + if (!IS_INTEL_IPU(dev)) + return; + + if (risky_device(dev)) + return; + + pci_info(dev, "Passthrough IOMMU for integrated Intel IPU\n"); + dmar_map_ipu = 0; +} + static void quirk_iommu_ipts(struct pci_dev *dev) { if (!IS_IPTS(dev)) @@ -4944,6 +4970,7 @@ static void quirk_iommu_ipts(struct pci_dev *dev) pci_info(dev, "Passthrough IOMMU for IPTS\n"); dmar_map_ipts = 0; } + /* G4x/GM45 integrated gfx dmar support is totally busted. */ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2a40, quirk_iommu_igfx); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2e00, quirk_iommu_igfx); @@ -4979,6 +5006,9 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x1632, quirk_iommu_igfx); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x163A, quirk_iommu_igfx); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x163D, quirk_iommu_igfx); +/* disable IPU dmar support */ +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, quirk_iommu_ipu); + /* disable IPTS dmar support */ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x9D3E, quirk_iommu_ipts); -- 2.37.2 From 9b1976c703584ca8302935993890825ae565253f Mon Sep 17 00:00:00 2001 From: Daniel Scally Date: Sun, 10 Oct 2021 20:57:02 +0200 Subject: [PATCH] platform/x86: int3472: Enable I2c daisy chain The TPS68470 PMIC has an I2C passthrough mode through which I2C traffic can be forwarded to a device connected to the PMIC as though it were connected directly to the system bus. Enable this mode when the chip is initialised. Signed-off-by: Daniel Scally Patchset: cameras --- drivers/platform/x86/intel/int3472/tps68470.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/platform/x86/intel/int3472/tps68470.c b/drivers/platform/x86/intel/int3472/tps68470.c index 22f61b47f9e5..e1de1ff40bba 100644 --- a/drivers/platform/x86/intel/int3472/tps68470.c +++ b/drivers/platform/x86/intel/int3472/tps68470.c @@ -45,6 +45,13 @@ static int tps68470_chip_init(struct device *dev, struct regmap *regmap) return ret; } + /* Enable I2C daisy chain */ + ret = regmap_write(regmap, TPS68470_REG_S_I2C_CTL, 0x03); + if (ret) { + dev_err(dev, "Failed to enable i2c daisy chain\n"); + return ret; + } + dev_info(dev, "TPS68470 REVID: 0x%02x\n", version); return 0; -- 2.37.2 From 5417703cd0d0c25b77ff62175cfa9f43d92aa10c Mon Sep 17 00:00:00 2001 From: Daniel Scally Date: Thu, 28 Oct 2021 21:55:16 +0100 Subject: [PATCH] media: i2c: Add driver for DW9719 VCM Add a driver for the DW9719 VCM. The driver creates a v4l2 subdevice and registers a control to set the desired focus. Signed-off-by: Daniel Scally Patchset: cameras --- MAINTAINERS | 7 + drivers/media/i2c/Kconfig | 11 + drivers/media/i2c/Makefile | 1 + drivers/media/i2c/dw9719.c | 427 +++++++++++++++++++++++++++++++++++++ 4 files changed, 446 insertions(+) create mode 100644 drivers/media/i2c/dw9719.c diff --git a/MAINTAINERS b/MAINTAINERS index 6772c9d0eccc..a639e7ff0402 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6163,6 +6163,13 @@ T: git git://linuxtv.org/media_tree.git F: Documentation/devicetree/bindings/media/i2c/dongwoon,dw9714.txt F: drivers/media/i2c/dw9714.c +DONGWOON DW9719 LENS VOICE COIL DRIVER +M: Daniel Scally +L: linux-media@vger.kernel.org +S: Maintained +T: git git://linuxtv.org/media_tree.git +F: drivers/media/i2c/dw9719.c + DONGWOON DW9768 LENS VOICE COIL DRIVER M: Dongchun Zhu L: linux-media@vger.kernel.org diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig index c926e5d43820..5c245f642ae3 100644 --- a/drivers/media/i2c/Kconfig +++ b/drivers/media/i2c/Kconfig @@ -806,6 +806,17 @@ config VIDEO_DW9714 capability. This is designed for linear control of voice coil motors, controlled via I2C serial interface. +config VIDEO_DW9719 + tristate "DW9719 lens voice coil support" + depends on I2C && VIDEO_V4L2 + select MEDIA_CONTROLLER + select VIDEO_V4L2_SUBDEV_API + select V4L2_ASYNC + help + This is a driver for the DW9719 camera lens voice coil. + This is designed for linear control of voice coil motors, + controlled via I2C serial interface. + config VIDEO_DW9768 tristate "DW9768 lens voice coil support" depends on I2C && VIDEO_DEV diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile index 3e1696963e7f..9dfda069e006 100644 --- a/drivers/media/i2c/Makefile +++ b/drivers/media/i2c/Makefile @@ -29,6 +29,7 @@ obj-$(CONFIG_VIDEO_CS5345) += cs5345.o obj-$(CONFIG_VIDEO_CS53L32A) += cs53l32a.o obj-$(CONFIG_VIDEO_CX25840) += cx25840/ obj-$(CONFIG_VIDEO_DW9714) += dw9714.o +obj-$(CONFIG_VIDEO_DW9719) += dw9719.o obj-$(CONFIG_VIDEO_DW9768) += dw9768.o obj-$(CONFIG_VIDEO_DW9807_VCM) += dw9807-vcm.o obj-$(CONFIG_VIDEO_ET8EK8) += et8ek8/ diff --git a/drivers/media/i2c/dw9719.c b/drivers/media/i2c/dw9719.c new file mode 100644 index 000000000000..8451c75b696b --- /dev/null +++ b/drivers/media/i2c/dw9719.c @@ -0,0 +1,427 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2012 Intel Corporation + +/* + * Based on linux/modules/camera/drivers/media/i2c/imx/dw9719.c in this repo: + * https://github.com/ZenfoneArea/android_kernel_asus_zenfone5 + */ + +#include + +#include +#include +#include +#include +#include + +#include +#include +#include + +#define DW9719_MAX_FOCUS_POS 1023 +#define DW9719_CTRL_STEPS 16 +#define DW9719_CTRL_DELAY_US 1000 +#define DELAY_MAX_PER_STEP_NS (1000000 * 1023) + +#define DW9719_INFO 0 +#define DW9719_ID 0xF1 +#define DW9719_CONTROL 2 +#define DW9719_VCM_CURRENT 3 + +#define DW9719_MODE 6 +#define DW9719_VCM_FREQ 7 + +#define DW9719_MODE_SAC3 0x40 +#define DW9719_DEFAULT_VCM_FREQ 0x60 +#define DW9719_ENABLE_RINGING 0x02 + +#define NUM_REGULATORS 2 + +#define to_dw9719_device(x) container_of(x, struct dw9719_device, sd) + +struct dw9719_device { + struct device *dev; + struct i2c_client *client; + struct regulator_bulk_data regulators[NUM_REGULATORS]; + struct v4l2_subdev sd; + + struct dw9719_v4l2_ctrls { + struct v4l2_ctrl_handler handler; + struct v4l2_ctrl *focus; + } ctrls; +}; + +static int dw9719_i2c_rd8(struct i2c_client *client, u8 reg, u8 *val) +{ + struct i2c_msg msg[2]; + u8 buf[2] = { reg }; + int ret; + + msg[0].addr = client->addr; + msg[0].flags = 0; + msg[0].len = 1; + msg[0].buf = buf; + + msg[1].addr = client->addr; + msg[1].flags = I2C_M_RD; + msg[1].len = 1; + msg[1].buf = &buf[1]; + *val = 0; + + ret = i2c_transfer(client->adapter, msg, 2); + if (ret < 0) + return ret; + + *val = buf[1]; + + return 0; +} + +static int dw9719_i2c_wr8(struct i2c_client *client, u8 reg, u8 val) +{ + struct i2c_msg msg; + int ret; + + u8 buf[2] = { reg, val }; + + msg.addr = client->addr; + msg.flags = 0; + msg.len = sizeof(buf); + msg.buf = buf; + + ret = i2c_transfer(client->adapter, &msg, 1); + + return ret < 0 ? ret : 0; +} + +static int dw9719_i2c_wr16(struct i2c_client *client, u8 reg, u16 val) +{ + struct i2c_msg msg; + u8 buf[3] = { reg }; + int ret; + + put_unaligned_be16(val, buf + 1); + + msg.addr = client->addr; + msg.flags = 0; + msg.len = sizeof(buf); + msg.buf = buf; + + ret = i2c_transfer(client->adapter, &msg, 1); + + return ret < 0 ? ret : 0; +} + +static int dw9719_detect(struct dw9719_device *dw9719) +{ + int ret; + u8 val; + + ret = dw9719_i2c_rd8(dw9719->client, DW9719_INFO, &val); + if (ret < 0) + return ret; + + if (val != DW9719_ID) { + dev_err(dw9719->dev, "Failed to detect correct id\n"); + ret = -ENXIO; + } + + return 0; +} + +static int dw9719_power_down(struct dw9719_device *dw9719) +{ + return regulator_bulk_disable(NUM_REGULATORS, dw9719->regulators); +} + +static int dw9719_power_up(struct dw9719_device *dw9719) +{ + int ret; + + ret = regulator_bulk_enable(NUM_REGULATORS, dw9719->regulators); + if (ret) + return ret; + + /* Jiggle SCL pin to wake up device */ + ret = dw9719_i2c_wr8(dw9719->client, DW9719_CONTROL, 1); + + /* Need 100us to transit from SHUTDOWN to STANDBY*/ + usleep_range(100, 1000); + + ret = dw9719_i2c_wr8(dw9719->client, DW9719_CONTROL, + DW9719_ENABLE_RINGING); + if (ret < 0) + goto fail_powerdown; + + ret = dw9719_i2c_wr8(dw9719->client, DW9719_MODE, DW9719_MODE_SAC3); + if (ret < 0) + goto fail_powerdown; + + ret = dw9719_i2c_wr8(dw9719->client, DW9719_VCM_FREQ, + DW9719_DEFAULT_VCM_FREQ); + if (ret < 0) + goto fail_powerdown; + + return 0; + +fail_powerdown: + dw9719_power_down(dw9719); + return ret; +} + +static int dw9719_t_focus_abs(struct dw9719_device *dw9719, s32 value) +{ + int ret; + + value = clamp(value, 0, DW9719_MAX_FOCUS_POS); + ret = dw9719_i2c_wr16(dw9719->client, DW9719_VCM_CURRENT, value); + if (ret < 0) + return ret; + + return 0; +} + +static int dw9719_set_ctrl(struct v4l2_ctrl *ctrl) +{ + struct dw9719_device *dw9719 = container_of(ctrl->handler, + struct dw9719_device, + ctrls.handler); + int ret; + + /* Only apply changes to the controls if the device is powered up */ + if (!pm_runtime_get_if_in_use(dw9719->dev)) + return 0; + + switch (ctrl->id) { + case V4L2_CID_FOCUS_ABSOLUTE: + ret = dw9719_t_focus_abs(dw9719, ctrl->val); + break; + default: + ret = -EINVAL; + } + + pm_runtime_put(dw9719->dev); + + return ret; +} + +static const struct v4l2_ctrl_ops dw9719_ctrl_ops = { + .s_ctrl = dw9719_set_ctrl, +}; + +static int __maybe_unused dw9719_suspend(struct device *dev) +{ + struct v4l2_subdev *sd = dev_get_drvdata(dev); + struct dw9719_device *dw9719 = to_dw9719_device(sd); + int ret; + int val; + + for (val = dw9719->ctrls.focus->val; val >= 0; + val -= DW9719_CTRL_STEPS) { + ret = dw9719_t_focus_abs(dw9719, val); + if (ret) + return ret; + + usleep_range(DW9719_CTRL_DELAY_US, DW9719_CTRL_DELAY_US + 10); + } + + return dw9719_power_down(dw9719); +} + +static int __maybe_unused dw9719_resume(struct device *dev) +{ + struct v4l2_subdev *sd = dev_get_drvdata(dev); + struct dw9719_device *dw9719 = to_dw9719_device(sd); + int current_focus = dw9719->ctrls.focus->val; + int ret; + int val; + + ret = dw9719_power_up(dw9719); + if (ret) + return ret; + + for (val = current_focus % DW9719_CTRL_STEPS; val < current_focus; + val += DW9719_CTRL_STEPS) { + ret = dw9719_t_focus_abs(dw9719, val); + if (ret) + goto err_power_down; + + usleep_range(DW9719_CTRL_DELAY_US, DW9719_CTRL_DELAY_US + 10); + } + + return 0; + +err_power_down: + dw9719_power_down(dw9719); + return ret; +} + +static int dw9719_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) +{ + return pm_runtime_resume_and_get(sd->dev); +} + +static int dw9719_close(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) +{ + pm_runtime_put(sd->dev); + + return 0; +} + +static const struct v4l2_subdev_internal_ops dw9719_internal_ops = { + .open = dw9719_open, + .close = dw9719_close, +}; + +static int dw9719_init_controls(struct dw9719_device *dw9719) +{ + const struct v4l2_ctrl_ops *ops = &dw9719_ctrl_ops; + int ret; + + ret = v4l2_ctrl_handler_init(&dw9719->ctrls.handler, 1); + if (ret) + return ret; + + dw9719->ctrls.focus = v4l2_ctrl_new_std(&dw9719->ctrls.handler, ops, + V4L2_CID_FOCUS_ABSOLUTE, 0, + DW9719_MAX_FOCUS_POS, 1, 0); + + if (dw9719->ctrls.handler.error) { + dev_err(dw9719->dev, "Error initialising v4l2 ctrls\n"); + ret = dw9719->ctrls.handler.error; + goto err_free_handler; + } + + dw9719->sd.ctrl_handler = &dw9719->ctrls.handler; + + return ret; + +err_free_handler: + v4l2_ctrl_handler_free(&dw9719->ctrls.handler); + return ret; +} + +static const struct v4l2_subdev_ops dw9719_ops = { }; + +static int dw9719_probe(struct i2c_client *client) +{ + struct dw9719_device *dw9719; + int ret; + + dw9719 = devm_kzalloc(&client->dev, sizeof(*dw9719), GFP_KERNEL); + if (!dw9719) + return -ENOMEM; + + dw9719->client = client; + dw9719->dev = &client->dev; + + dw9719->regulators[0].supply = "vdd"; + /* + * The DW9719 has only the 1 VDD voltage input, but some PMICs such as + * the TPS68470 PMIC have I2C passthrough capability, to disconnect the + * sensor's I2C pins from the I2C bus when the sensors VSIO (Sensor-IO) + * is off, because some sensors then short these pins to ground; + * and the DW9719 might sit behind this passthrough, this it needs to + * enable VSIO as that will also enable the I2C passthrough. + */ + dw9719->regulators[1].supply = "vsio"; + + ret = devm_regulator_bulk_get(&client->dev, NUM_REGULATORS, + dw9719->regulators); + if (ret) + return dev_err_probe(&client->dev, ret, "getting regulators\n"); + + v4l2_i2c_subdev_init(&dw9719->sd, client, &dw9719_ops); + dw9719->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; + dw9719->sd.internal_ops = &dw9719_internal_ops; + + ret = dw9719_init_controls(dw9719); + if (ret) + return ret; + + ret = media_entity_pads_init(&dw9719->sd.entity, 0, NULL); + if (ret < 0) + goto err_free_ctrl_handler; + + dw9719->sd.entity.function = MEDIA_ENT_F_LENS; + + /* + * We need the driver to work in the event that pm runtime is disable in + * the kernel, so power up and verify the chip now. In the event that + * runtime pm is disabled this will leave the chip on, so that the lens + * will work. + */ + + ret = dw9719_power_up(dw9719); + if (ret) + goto err_cleanup_media; + + ret = dw9719_detect(dw9719); + if (ret) + goto err_powerdown; + + pm_runtime_set_active(&client->dev); + pm_runtime_get_noresume(&client->dev); + pm_runtime_enable(&client->dev); + + ret = v4l2_async_register_subdev(&dw9719->sd); + if (ret < 0) + goto err_pm_runtime; + + pm_runtime_set_autosuspend_delay(&client->dev, 1000); + pm_runtime_use_autosuspend(&client->dev); + pm_runtime_put_autosuspend(&client->dev); + + return ret; + +err_pm_runtime: + pm_runtime_disable(&client->dev); + pm_runtime_put_noidle(&client->dev); +err_powerdown: + dw9719_power_down(dw9719); +err_cleanup_media: + media_entity_cleanup(&dw9719->sd.entity); +err_free_ctrl_handler: + v4l2_ctrl_handler_free(&dw9719->ctrls.handler); + + return ret; +} + +static int dw9719_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct dw9719_device *dw9719 = container_of(sd, struct dw9719_device, + sd); + + pm_runtime_disable(&client->dev); + v4l2_async_unregister_subdev(sd); + v4l2_ctrl_handler_free(&dw9719->ctrls.handler); + media_entity_cleanup(&dw9719->sd.entity); + + return 0; +} + +static const struct i2c_device_id dw9719_id_table[] = { + { "dw9719" }, + { } +}; +MODULE_DEVICE_TABLE(i2c, dw9719_id_table); + +static const struct dev_pm_ops dw9719_pm_ops = { + SET_RUNTIME_PM_OPS(dw9719_suspend, dw9719_resume, NULL) +}; + +static struct i2c_driver dw9719_i2c_driver = { + .driver = { + .name = "dw9719", + .pm = &dw9719_pm_ops, + }, + .probe_new = dw9719_probe, + .remove = dw9719_remove, + .id_table = dw9719_id_table, +}; +module_i2c_driver(dw9719_i2c_driver); + +MODULE_AUTHOR("Daniel Scally "); +MODULE_DESCRIPTION("DW9719 VCM Driver"); +MODULE_LICENSE("GPL"); -- 2.37.2 From b4539e8c7d09c19dac7d6622a3c31e4ee368b10f Mon Sep 17 00:00:00 2001 From: Daniel Scally Date: Wed, 4 May 2022 23:21:45 +0100 Subject: [PATCH] media: ipu3-cio2: Move functionality from .complete() to .bound() Creating links and registering subdev nodes during the .complete() callback has the unfortunate effect of preventing all cameras that connect to a notifier from working if any one of their drivers fails to probe. Moving the functionality from .complete() to .bound() allows those camera sensor drivers that did probe correctly to work regardless. Signed-off-by: Daniel Scally Patchset: cameras --- drivers/media/pci/intel/ipu3/ipu3-cio2-main.c | 65 +++++++------------ 1 file changed, 23 insertions(+), 42 deletions(-) diff --git a/drivers/media/pci/intel/ipu3/ipu3-cio2-main.c b/drivers/media/pci/intel/ipu3/ipu3-cio2-main.c index dbdbdb648a0d..d0715144bf3e 100644 --- a/drivers/media/pci/intel/ipu3/ipu3-cio2-main.c +++ b/drivers/media/pci/intel/ipu3/ipu3-cio2-main.c @@ -1383,7 +1383,10 @@ static int cio2_notifier_bound(struct v4l2_async_notifier *notifier, { struct cio2_device *cio2 = to_cio2_device(notifier); struct sensor_async_subdev *s_asd = to_sensor_asd(asd); + struct device *dev = &cio2->pci_dev->dev; struct cio2_queue *q; + unsigned int pad; + int ret; if (cio2->queue[s_asd->csi2.port].sensor) return -EBUSY; @@ -1394,7 +1397,26 @@ static int cio2_notifier_bound(struct v4l2_async_notifier *notifier, q->sensor = sd; q->csi_rx_base = cio2->base + CIO2_REG_PIPE_BASE(q->csi2.port); - return 0; + for (pad = 0; pad < q->sensor->entity.num_pads; pad++) + if (q->sensor->entity.pads[pad].flags & + MEDIA_PAD_FL_SOURCE) + break; + + if (pad == q->sensor->entity.num_pads) { + dev_err(dev, "failed to find src pad for %s\n", + q->sensor->name); + return -ENXIO; + } + + ret = media_create_pad_link(&q->sensor->entity, pad, &q->subdev.entity, + CIO2_PAD_SINK, 0); + if (ret) { + dev_err(dev, "failed to create link for %s\n", + q->sensor->name); + return ret; + } + + return v4l2_device_register_subdev_nodes(&cio2->v4l2_dev); } /* The .unbind callback */ @@ -1408,50 +1430,9 @@ static void cio2_notifier_unbind(struct v4l2_async_notifier *notifier, cio2->queue[s_asd->csi2.port].sensor = NULL; } -/* .complete() is called after all subdevices have been located */ -static int cio2_notifier_complete(struct v4l2_async_notifier *notifier) -{ - struct cio2_device *cio2 = to_cio2_device(notifier); - struct device *dev = &cio2->pci_dev->dev; - struct sensor_async_subdev *s_asd; - struct v4l2_async_subdev *asd; - struct cio2_queue *q; - unsigned int pad; - int ret; - - list_for_each_entry(asd, &cio2->notifier.asd_list, asd_list) { - s_asd = to_sensor_asd(asd); - q = &cio2->queue[s_asd->csi2.port]; - - for (pad = 0; pad < q->sensor->entity.num_pads; pad++) - if (q->sensor->entity.pads[pad].flags & - MEDIA_PAD_FL_SOURCE) - break; - - if (pad == q->sensor->entity.num_pads) { - dev_err(dev, "failed to find src pad for %s\n", - q->sensor->name); - return -ENXIO; - } - - ret = media_create_pad_link( - &q->sensor->entity, pad, - &q->subdev.entity, CIO2_PAD_SINK, - 0); - if (ret) { - dev_err(dev, "failed to create link for %s\n", - q->sensor->name); - return ret; - } - } - - return v4l2_device_register_subdev_nodes(&cio2->v4l2_dev); -} - static const struct v4l2_async_notifier_operations cio2_async_ops = { .bound = cio2_notifier_bound, .unbind = cio2_notifier_unbind, - .complete = cio2_notifier_complete, }; static int cio2_parse_firmware(struct cio2_device *cio2) -- 2.37.2 From 97636fb45ffd69fdbe4106982169709bf03530fb Mon Sep 17 00:00:00 2001 From: Daniel Scally Date: Thu, 2 Jun 2022 22:15:56 +0100 Subject: [PATCH] media: ipu3-cio2: Re-add .complete() to ipu3-cio2 Removing the .complete() callback had some unintended consequences. Because the VCM driver is not directly linked to the ipu3-cio2 driver .bound() never gets called for it, which means its devnode is never created if it probes late. Because .complete() waits for any sub-notifiers to also be complete it is captured in that call. Signed-off-by: Daniel Scally Patchset: cameras --- drivers/media/pci/intel/ipu3/ipu3-cio2-main.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/media/pci/intel/ipu3/ipu3-cio2-main.c b/drivers/media/pci/intel/ipu3/ipu3-cio2-main.c index d0715144bf3e..3a25dfc696b2 100644 --- a/drivers/media/pci/intel/ipu3/ipu3-cio2-main.c +++ b/drivers/media/pci/intel/ipu3/ipu3-cio2-main.c @@ -1430,9 +1430,18 @@ static void cio2_notifier_unbind(struct v4l2_async_notifier *notifier, cio2->queue[s_asd->csi2.port].sensor = NULL; } +/* .complete() is called after all subdevices have been located */ +static int cio2_notifier_complete(struct v4l2_async_notifier *notifier) +{ + struct cio2_device *cio2 = to_cio2_device(notifier); + + return v4l2_device_register_subdev_nodes(&cio2->v4l2_dev); +} + static const struct v4l2_async_notifier_operations cio2_async_ops = { .bound = cio2_notifier_bound, .unbind = cio2_notifier_unbind, + .complete = cio2_notifier_complete, }; static int cio2_parse_firmware(struct cio2_device *cio2) -- 2.37.2 From 2045d2e3f30af8b3fe7a18030b2bc366f4b1c24f Mon Sep 17 00:00:00 2001 From: Maximilian Luz Date: Fri, 15 Jul 2022 23:48:00 +0200 Subject: [PATCH] drivers/media/i2c: Fix DW9719 dependencies It should depend on VIDEO_DEV instead of VIDEO_V4L2. Signed-off-by: Maximilian Luz Patchset: cameras --- drivers/media/i2c/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig index 5c245f642ae3..50ea62e63784 100644 --- a/drivers/media/i2c/Kconfig +++ b/drivers/media/i2c/Kconfig @@ -808,7 +808,7 @@ config VIDEO_DW9714 config VIDEO_DW9719 tristate "DW9719 lens voice coil support" - depends on I2C && VIDEO_V4L2 + depends on I2C && VIDEO_DEV select MEDIA_CONTROLLER select VIDEO_V4L2_SUBDEV_API select V4L2_ASYNC -- 2.37.2 From 73bf1e7fc5e71751a6b747d5de20e565604522e6 Mon Sep 17 00:00:00 2001 From: Sachi King Date: Sat, 29 May 2021 17:47:38 +1000 Subject: [PATCH] ACPI: Add quirk for Surface Laptop 4 AMD missing irq 7 override This patch is the work of Thomas Gleixner and is copied from: https://lore.kernel.org/lkml/87lf8ddjqx.ffs@nanos.tec.linutronix.de/ This patch adds a quirk to the ACPI setup to patch in the the irq 7 pin setup that is missing in the laptops ACPI table. This patch was used for validation of the issue, and is not a proper fix, but is probably a better temporary hack than continuing to probe the Legacy PIC and run with the PIC in an unknown state. Patchset: amd-gpio --- arch/x86/kernel/acpi/boot.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index 907cc98b1938..0116d27b29ea 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include @@ -1234,6 +1235,17 @@ static void __init mp_config_acpi_legacy_irqs(void) } } +static const struct dmi_system_id surface_quirk[] __initconst = { + { + .ident = "Microsoft Surface Laptop 4 (AMD)", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"), + DMI_MATCH(DMI_PRODUCT_SKU, "Surface_Laptop_4_1952:1953") + }, + }, + {} +}; + /* * Parse IOAPIC related entries in MADT * returns 0 on success, < 0 on error @@ -1289,6 +1301,11 @@ static int __init acpi_parse_madt_ioapic_entries(void) acpi_sci_ioapic_setup(acpi_gbl_FADT.sci_interrupt, 0, 0, acpi_gbl_FADT.sci_interrupt); + if (dmi_check_system(surface_quirk)) { + pr_warn("Surface hack: Override irq 7\n"); + mp_override_legacy_irq(7, 3, 3, 7); + } + /* Fill in identity legacy mappings where no override */ mp_config_acpi_legacy_irqs(); -- 2.37.2 From 6bbad3dfd4d1a28db24ed3ce0a011a824fb2a2dd Mon Sep 17 00:00:00 2001 From: Maximilian Luz Date: Thu, 3 Jun 2021 14:04:26 +0200 Subject: [PATCH] ACPI: Add AMD 13" Surface Laptop 4 model to irq 7 override quirk The 13" version of the Surface Laptop 4 has the same problem as the 15" version, but uses a different SKU. Add that SKU to the quirk as well. Patchset: amd-gpio --- arch/x86/kernel/acpi/boot.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index 0116d27b29ea..af102c6f8e5b 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -1237,12 +1237,19 @@ static void __init mp_config_acpi_legacy_irqs(void) static const struct dmi_system_id surface_quirk[] __initconst = { { - .ident = "Microsoft Surface Laptop 4 (AMD)", + .ident = "Microsoft Surface Laptop 4 (AMD 15\")", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"), DMI_MATCH(DMI_PRODUCT_SKU, "Surface_Laptop_4_1952:1953") }, }, + { + .ident = "Microsoft Surface Laptop 4 (AMD 13\")", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"), + DMI_MATCH(DMI_PRODUCT_SKU, "Surface_Laptop_4_1958:1959") + }, + }, {} }; -- 2.37.2