From 26077d270f462eaf3da592ed047956df3436ed36 Mon Sep 17 00:00:00 2001 From: John Martens Date: Fri, 29 Mar 2024 20:18:47 +0000 Subject: [PATCH] Add legion-laptop v0.0.12 Add extra support for Lenovo Legion laptops. --- drivers/platform/x86/Kconfig | 10 + drivers/platform/x86/Makefile | 1 + drivers/platform/x86/legion-laptop.c | 6089 ++++++++++++++++++++++++++ 3 files changed, 6100 insertions(+) create mode 100644 drivers/platform/x86/legion-laptop.c diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index 49c2c4cd8..b7d70c20e 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -643,6 +643,16 @@ config THINKPAD_LMI To compile this driver as a module, choose M here: the module will be called think-lmi. +config LEGION_LAPTOP + tristate "Lenovo Legion Laptop Extras" + depends on ACPI + depends on ACPI_WMI || ACPI_WMI = n + depends on HWMON || HWMON = n + select ACPI_PLATFORM_PROFILE + help + This is a driver for Lenovo Legion laptops and contains drivers for + hotkey, fan control, and power mode. + source "drivers/platform/x86/intel/Kconfig" config MSI_EC diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile index 52dfdf574..5f32dd9df 100644 --- a/drivers/platform/x86/Makefile +++ b/drivers/platform/x86/Makefile @@ -65,6 +65,7 @@ obj-$(CONFIG_LENOVO_YMC) += lenovo-ymc.o obj-$(CONFIG_SENSORS_HDAPS) += hdaps.o obj-$(CONFIG_THINKPAD_ACPI) += thinkpad_acpi.o obj-$(CONFIG_THINKPAD_LMI) += think-lmi.o +obj-$(CONFIG_LEGION_LAPTOP) += legion-laptop.o obj-$(CONFIG_YOGABOOK) += lenovo-yogabook.o # Intel diff --git a/drivers/platform/x86/legion-laptop.c b/drivers/platform/x86/legion-laptop.c new file mode 100644 index 000000000..5ec0a518f --- /dev/null +++ b/drivers/platform/x86/legion-laptop.c @@ -0,0 +1,6089 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * legion-laptop.c - Extra Lenovo Legion laptop support, in + * particular for fan curve control and power mode. + * + * Copyright (C) 2022 johnfan + * + * + * This driver might work on other Lenovo Legion models. If you + * want to try it you can pass force=1 as argument + * to the module which will force it to load even when the DMI + * data doesn't match the model AND FIRMWARE. + * + * Support for other hardware of this model is already partially + * provided by the module ideapad-laptop. + * + * The development page for this driver is located at + * https://github.com/johnfanv2/LenovoLegionLinux + * + * This driver exports the files: + * - /sys/kernel/debug/legion/fancurve (ro) + * The fan curve stored in the firmware in the form of a + * human readable table. + * + * - /sys/module/legion_laptop/drivers/platform\:legion/PNP0C09\:00/powermode (rw) + * 0: balanced mode (white) + * 1: performance mode (red) + * 2: quiet mode (blue) + * ?: custom mode (pink) + * + * NOTE: Writing to this will load the default fan curve from + * the firmware for this mode, so the fan curve might + * have to be reconfigured if needed. + * + * It implements the usual hwmon interface to monitor fan speed and temmperature + * and allows to set the fan curve inside the firware. + * + * - /sys/class/hwmon/X/fan1_input or /sys/class/hwmon/X/fan2_input (ro) + * Current fan speed of fan1/fan2. + * - /sys/class/hwmon/X/temp1_input (ro) + * - /sys/class/hwmon/X/temp2_input (ro) + * - /sys/class/hwmon/X/temp3_input (ro) + * Temperature (Celsius) of CPU, GPU, and IC used for fan control. + * - /sys/class/hwmon/X/pwmY_auto_pointZ_pwm (rw) + * PWM (0-255) of the fan at the Y-level in the fan curve + * - /sys/class/hwmon/X/pwmY_auto_pointZ_temp (rw) + * upper temperature of tempZ (CPU, GPU, or IC) at the Y-level in the fan curve + * - /sys/class/hwmon/X/pwmY_auto_pointZ_temp_hyst (rw) + * hysteris (CPU, GPU, or IC) at the Y-level in the fan curve. The lower + * temperatue of the level is the upper temperature minus the hysteris + * + * + * Credits for reverse engineering the firmware to: + * - David Woodhouse: heavily inspired by lenovo_laptop.c + * - Luke Cama: Windows version "LegionFanControl" + * - SmokelessCPU: reverse engineering of custom registers in EC + * and commincation method with EC via ports + * - 0x1F9F1: additional reverse engineering for complete fan curve + */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("johnfan"); +MODULE_DESCRIPTION("Lenovo Legion laptop extras"); + +static bool force; +module_param(force, bool, 0440); +MODULE_PARM_DESC( + force, + "Force loading this module even if model or BIOS does not match."); + +static bool ec_readonly; +module_param(ec_readonly, bool, 0440); +MODULE_PARM_DESC( + ec_readonly, + "Only read from embedded controller but do not write or change settings."); + +static bool enable_platformprofile = true; +module_param(enable_platformprofile, bool, 0440); +MODULE_PARM_DESC( + enable_platformprofile, + "Enable the platform profile sysfs API to read and write the power mode."); + +#define LEGIONFEATURES \ + "fancurve powermode platformprofile platformprofilenotify minifancurve" + +//Size of fancurve stored in embedded controller +#define MAXFANCURVESIZE 10 + +#define LEGION_DRVR_SHORTNAME "legion" +#define LEGION_HWMON_NAME LEGION_DRVR_SHORTNAME "_hwmon" + +struct legion_private; + +/* =============================== */ +/* Embedded Controller Description */ +/* =============================== */ + +/* The configuration and registers to access the embedded controller + * depending on different the version of the software on the + * embedded controller or and the BIOS/UEFI firmware. + * + * To control fan curve in the embedded controller (EC) one has to + * write to its "RAM". There are different possibilities: + * - EC RAM is memory mapped (write to it with ioremap) + * - access EC RAM via ported mapped IO (outb/inb) + * - access EC RAM via ACPI methods. It is only possible to write + * to part of it (first 0xFF bytes?) + * + * In later models the firmware directly exposes ACPI methods to + * set the fan curve directly, without writing to EC RAM. This + * is done inside the ACPI method. + */ + +/** + * Offsets for interesting values inside the EC RAM (0 = start of + * EC RAM) These might change depending on the software inside of + * the EC, which can be updated by a BIOS update from Lenovo. + */ +// TODO: same order as in initialization +struct ec_register_offsets { + // Super I/O Configuration Registers + // 7.15 General Control (GCTRL) + // General Control (GCTRL) + // (see EC Interface Registers and 6.2 Plug and Play Configuration (PNPCFG)) in datasheet + // note: these are in two places saved + // in EC Interface Registers and in super io configuration registers + // Chip ID + u16 ECHIPID1; + u16 ECHIPID2; + // Chip Version + u16 ECHIPVER; + u16 ECDEBUG; + + // Lenovo Custom OEM extension + // Firmware of ITE can be extended by + // custom program using its own "variables" + // These are the offsets to these "variables" + u16 EXT_FAN_CUR_POINT; + u16 EXT_FAN_POINTS_SIZE; + u16 EXT_FAN1_BASE; + u16 EXT_FAN2_BASE; + u16 EXT_FAN_ACC_BASE; + u16 EXT_FAN_DEC_BASE; + u16 EXT_CPU_TEMP; + u16 EXT_CPU_TEMP_HYST; + u16 EXT_GPU_TEMP; + u16 EXT_GPU_TEMP_HYST; + u16 EXT_VRM_TEMP; + u16 EXT_VRM_TEMP_HYST; + u16 EXT_FAN1_RPM_LSB; + u16 EXT_FAN1_RPM_MSB; + u16 EXT_FAN2_RPM_LSB; + u16 EXT_FAN2_RPM_MSB; + u16 EXT_FAN1_TARGET_RPM; + u16 EXT_FAN2_TARGET_RPM; + u16 EXT_POWERMODE; + u16 EXT_MINIFANCURVE_ON_COOL; + // values + // 0x04: enable mini fan curve if left for too long on cool level + // - this might be due to potential temp failure + // - or just because of really cool temps + // 0xA0: disable it + u16 EXT_LOCKFANCONTROLLER; + u16 EXT_MAXIMUMFANSPEED; + u16 EXT_WHITE_KEYBOARD_BACKLIGHT; + u16 EXT_IC_TEMP_INPUT; + u16 EXT_CPU_TEMP_INPUT; + u16 EXT_GPU_TEMP_INPUT; +}; + +enum access_method { + ACCESS_METHOD_NO_ACCESS = 0, + ACCESS_METHOD_EC = 1, + ACCESS_METHOD_ACPI = 2, + ACCESS_METHOD_WMI = 3, + ACCESS_METHOD_WMI2 = 4, + ACCESS_METHOD_WMI3 = 5, + ACCESS_METHOD_EC2 = 10, // ideapad fancurve method + ACCESS_METHOD_EC3 = 11, // loq +}; + +struct model_config { + const struct ec_register_offsets *registers; + bool check_embedded_controller_id; + u16 embedded_controller_id; + + // first addr in EC we access/scan + phys_addr_t memoryio_physical_ec_start; + size_t memoryio_size; + + // TODO: maybe use bitfield + bool has_minifancurve; + bool has_custom_powermode; + enum access_method access_method_powermode; + + enum access_method access_method_keyboard; + enum access_method access_method_temperature; + enum access_method access_method_fanspeed; + enum access_method access_method_fancurve; + enum access_method access_method_fanfullspeed; + bool three_state_keyboard; + + bool acpi_check_dev; + + phys_addr_t ramio_physical_start; + size_t ramio_size; +}; + +/* =================================== */ +/* Configuration for different models */ +/* =================================== */ + +// Idea by SmokelesssCPU (modified) +// - all default names and register addresses are supported by datasheet +// - register addresses for custom firmware by SmokelesssCPU +static const struct ec_register_offsets ec_register_offsets_v0 = { + .ECHIPID1 = 0x2000, + .ECHIPID2 = 0x2001, + .ECHIPVER = 0x2002, + .ECDEBUG = 0x2003, + .EXT_FAN_CUR_POINT = 0xC534, + .EXT_FAN_POINTS_SIZE = 0xC535, + .EXT_FAN1_BASE = 0xC540, + .EXT_FAN2_BASE = 0xC550, + .EXT_FAN_ACC_BASE = 0xC560, + .EXT_FAN_DEC_BASE = 0xC570, + .EXT_CPU_TEMP = 0xC580, + .EXT_CPU_TEMP_HYST = 0xC590, + .EXT_GPU_TEMP = 0xC5A0, + .EXT_GPU_TEMP_HYST = 0xC5B0, + .EXT_VRM_TEMP = 0xC5C0, + .EXT_VRM_TEMP_HYST = 0xC5D0, + .EXT_FAN1_RPM_LSB = 0xC5E0, + .EXT_FAN1_RPM_MSB = 0xC5E1, + .EXT_FAN2_RPM_LSB = 0xC5E2, + .EXT_FAN2_RPM_MSB = 0xC5E3, + .EXT_MINIFANCURVE_ON_COOL = 0xC536, + .EXT_LOCKFANCONTROLLER = 0xc4AB, + .EXT_CPU_TEMP_INPUT = 0xc538, + .EXT_GPU_TEMP_INPUT = 0xc539, + .EXT_IC_TEMP_INPUT = 0xC5E8, + .EXT_POWERMODE = 0xc420, + .EXT_FAN1_TARGET_RPM = 0xc600, + .EXT_FAN2_TARGET_RPM = 0xc601, + .EXT_MAXIMUMFANSPEED = 0xBD, + .EXT_WHITE_KEYBOARD_BACKLIGHT = (0x3B + 0xC400) +}; + +static const struct ec_register_offsets ec_register_offsets_v1 = { + .ECHIPID1 = 0x2000, + .ECHIPID2 = 0x2001, + .ECHIPVER = 0x2002, + .ECDEBUG = 0x2003, + .EXT_FAN_CUR_POINT = 0xC534, + .EXT_FAN_POINTS_SIZE = 0xC535, + .EXT_FAN1_BASE = 0xC540, + .EXT_FAN2_BASE = 0xC550, + .EXT_FAN_ACC_BASE = 0xC560, + .EXT_FAN_DEC_BASE = 0xC570, + .EXT_CPU_TEMP = 0xC580, + .EXT_CPU_TEMP_HYST = 0xC590, + .EXT_GPU_TEMP = 0xC5A0, + .EXT_GPU_TEMP_HYST = 0xC5B0, + .EXT_VRM_TEMP = 0xC5C0, + .EXT_VRM_TEMP_HYST = 0xC5D0, + .EXT_FAN1_RPM_LSB = 0xC5E0, + .EXT_FAN1_RPM_MSB = 0xC5E1, + .EXT_FAN2_RPM_LSB = 0xC5E2, + .EXT_FAN2_RPM_MSB = 0xC5E3, + .EXT_MINIFANCURVE_ON_COOL = 0xC536, + .EXT_LOCKFANCONTROLLER = 0xc4AB, + .EXT_CPU_TEMP_INPUT = 0xc538, + .EXT_GPU_TEMP_INPUT = 0xc539, + .EXT_IC_TEMP_INPUT = 0xC5E8, + .EXT_POWERMODE = 0xc41D, + .EXT_FAN1_TARGET_RPM = 0xc600, + .EXT_FAN2_TARGET_RPM = 0xc601, + .EXT_MAXIMUMFANSPEED = 0xBD, + .EXT_WHITE_KEYBOARD_BACKLIGHT = (0x3B + 0xC400) +}; + +static const struct ec_register_offsets ec_register_offsets_ideapad_v0 = { + .ECHIPID1 = 0x2000, + .ECHIPID2 = 0x2001, + .ECHIPVER = 0x2002, + .ECDEBUG = 0x2003, + .EXT_FAN_CUR_POINT = 0xC5a0, // not found yet + .EXT_FAN_POINTS_SIZE = 0xC5a0, // constant 0 + .EXT_FAN1_BASE = 0xC5a0, + .EXT_FAN2_BASE = 0xC5a8, + .EXT_FAN_ACC_BASE = 0xC5a0, // not found yet + .EXT_FAN_DEC_BASE = 0xC5a0, // not found yet + .EXT_CPU_TEMP = 0xC550, // and repeated after 8 bytes + .EXT_CPU_TEMP_HYST = 0xC590, // and repeated after 8 bytes + .EXT_GPU_TEMP = 0xC5C0, // and repeated after 8 bytes + .EXT_GPU_TEMP_HYST = 0xC5D0, // and repeated after 8 bytes + .EXT_VRM_TEMP = 0xC5a0, // does not exists or not found + .EXT_VRM_TEMP_HYST = 0xC5a0, // does not exists ot not found yet + .EXT_FAN1_RPM_LSB = 0xC5a0, // not found yet + .EXT_FAN1_RPM_MSB = 0xC5a0, // not found yet + .EXT_FAN2_RPM_LSB = 0xC5a0, // not found yet + .EXT_FAN2_RPM_MSB = 0xC5a0, // not found yet + .EXT_MINIFANCURVE_ON_COOL = 0xC5a0, // does not exists or not found + .EXT_LOCKFANCONTROLLER = 0xC5a0, // does not exists or not found + .EXT_CPU_TEMP_INPUT = 0xC5a0, // not found yet + .EXT_GPU_TEMP_INPUT = 0xC5a0, // not found yet + .EXT_IC_TEMP_INPUT = 0xC5a0, // not found yet + .EXT_POWERMODE = 0xC5a0, // not found yet + .EXT_FAN1_TARGET_RPM = 0xC5a0, // not found yet + .EXT_FAN2_TARGET_RPM = 0xC5a0, // not found yet + .EXT_MAXIMUMFANSPEED = 0xC5a0, // not found yet + .EXT_WHITE_KEYBOARD_BACKLIGHT = 0xC5a0 // not found yet +}; + +static const struct ec_register_offsets ec_register_offsets_ideapad_v1 = { + .ECHIPID1 = 0x2000, + .ECHIPID2 = 0x2001, + .ECHIPVER = 0x2002, + .ECDEBUG = 0x2003, + .EXT_FAN_CUR_POINT = 0xC5a0, // not found yet + .EXT_FAN_POINTS_SIZE = 0xC5a0, // constant 0 + .EXT_FAN1_BASE = 0xC5a0, + .EXT_FAN2_BASE = 0xC5a8, + .EXT_FAN_ACC_BASE = 0xC5a0, // not found yet + .EXT_FAN_DEC_BASE = 0xC5a0, // not found yet + .EXT_CPU_TEMP = 0xC550, // and repeated after 8 bytes + .EXT_CPU_TEMP_HYST = 0xC590, // and repeated after 8 bytes + .EXT_GPU_TEMP = 0xC5C0, // and repeated after 8 bytes + .EXT_GPU_TEMP_HYST = 0xC5D0, // and repeated after 8 bytes + .EXT_VRM_TEMP = 0xC5a0, // does not exists or not found + .EXT_VRM_TEMP_HYST = 0xC5a0, // does not exists ot not found yet + .EXT_FAN1_RPM_LSB = 0xC5a0, // not found yet + .EXT_FAN1_RPM_MSB = 0xC5a0, // not found yet + .EXT_FAN2_RPM_LSB = 0xC5a0, // not found yet + .EXT_FAN2_RPM_MSB = 0xC5a0, // not found yet + .EXT_MINIFANCURVE_ON_COOL = 0xC5a0, // does not exists or not found + .EXT_LOCKFANCONTROLLER = 0xC5a0, // does not exists or not found + .EXT_CPU_TEMP_INPUT = 0xC5a0, // not found yet + .EXT_GPU_TEMP_INPUT = 0xC5a0, // not found yet + .EXT_IC_TEMP_INPUT = 0xC5a0, // not found yet + .EXT_POWERMODE = 0xC5a0, // not found yet + .EXT_FAN1_TARGET_RPM = 0xC5a0, // not found yet + .EXT_FAN2_TARGET_RPM = 0xC5a0, // not found yet + .EXT_MAXIMUMFANSPEED = 0xC5a0, // not found yet + .EXT_WHITE_KEYBOARD_BACKLIGHT = 0xC5a0 // not found yet +}; + +static const struct ec_register_offsets ec_register_offsets_loq_v0 = { + .ECHIPID1 = 0x2000, + .ECHIPID2 = 0x2001, + .ECHIPVER = 0x2002, + .ECDEBUG = 0x2003, + .EXT_FAN_CUR_POINT = 0xC5a0, + .EXT_FAN_POINTS_SIZE = 0xC5a0, // constant 0 + .EXT_FAN1_BASE = 0xC530, + .EXT_FAN2_BASE = 0xC530, // same rpm as cpu + .EXT_FAN_ACC_BASE = 0xC5a0, // not found yet + .EXT_FAN_DEC_BASE = 0xC5a0, // not found yet + .EXT_CPU_TEMP = 0xC52F, + .EXT_CPU_TEMP_HYST = 0xC5a0, // not found yet + .EXT_GPU_TEMP = 0xC531, + .EXT_GPU_TEMP_HYST = 0xC5a0, // not found yet + .EXT_VRM_TEMP = 0xC5a0, // not found yet + .EXT_VRM_TEMP_HYST = 0xC5a0, // not found yet + .EXT_FAN1_RPM_LSB = 0xC5a0, // not found yet + .EXT_FAN1_RPM_MSB = 0xC5a0, // not found yet + .EXT_FAN2_RPM_LSB = 0xC5a0, // not found yet + .EXT_FAN2_RPM_MSB = 0xC5a0, // not found yet + .EXT_MINIFANCURVE_ON_COOL = 0xC5a0, // not found yet + .EXT_LOCKFANCONTROLLER = 0xC5a0, // not found yet + .EXT_CPU_TEMP_INPUT = 0xC5a0, // not found yet + .EXT_GPU_TEMP_INPUT = 0xC5a0, // not found yet + .EXT_IC_TEMP_INPUT = 0xC5a0, // not found yet + .EXT_POWERMODE = 0xc41D, + .EXT_FAN1_TARGET_RPM = 0xC5a0, // not found yet + .EXT_FAN2_TARGET_RPM = 0xC5a0, // not found yet + .EXT_MAXIMUMFANSPEED = 0xC5a0, // not found yet + .EXT_WHITE_KEYBOARD_BACKLIGHT = 0xC5a0 // not found yet +}; + +static const struct model_config model_v0 = { + .registers = &ec_register_offsets_v0, + .check_embedded_controller_id = true, + .embedded_controller_id = 0x8227, + .memoryio_physical_ec_start = 0xC400, + .memoryio_size = 0x300, + .has_minifancurve = true, + .has_custom_powermode = true, + .access_method_powermode = ACCESS_METHOD_WMI, + .access_method_keyboard = ACCESS_METHOD_WMI, + .access_method_fanspeed = ACCESS_METHOD_EC, + .access_method_temperature = ACCESS_METHOD_EC, + .access_method_fancurve = ACCESS_METHOD_EC, + .access_method_fanfullspeed = ACCESS_METHOD_WMI, + .acpi_check_dev = true, + .ramio_physical_start = 0xFE00D400, + .ramio_size = 0x600 +}; + +static const struct model_config model_j2cn = { + .registers = &ec_register_offsets_v0, + .check_embedded_controller_id = true, + .embedded_controller_id = 0x8227, + .memoryio_physical_ec_start = 0xC400, + .memoryio_size = 0x300, + .has_minifancurve = true, + .has_custom_powermode = true, + .access_method_powermode = ACCESS_METHOD_WMI, + .access_method_keyboard = ACCESS_METHOD_WMI, + .access_method_fanspeed = ACCESS_METHOD_EC, + .access_method_temperature = ACCESS_METHOD_EC, + .access_method_fancurve = ACCESS_METHOD_EC, + .access_method_fanfullspeed = ACCESS_METHOD_WMI, + .acpi_check_dev = true, + .ramio_physical_start = 0xFE00D400, + .ramio_size = 0x600 +}; + +static const struct model_config model_9vcn = { + .registers = &ec_register_offsets_ideapad_v1, + .check_embedded_controller_id = true, + .embedded_controller_id = 0x8226, + .memoryio_physical_ec_start = 0xC400, + .memoryio_size = 0x300, + .has_minifancurve = true, + .has_custom_powermode = true, + .access_method_powermode = ACCESS_METHOD_WMI, + .access_method_keyboard = ACCESS_METHOD_WMI, + .access_method_fanspeed = ACCESS_METHOD_WMI, + .access_method_temperature = ACCESS_METHOD_WMI, + .access_method_fancurve = ACCESS_METHOD_EC2, + .access_method_fanfullspeed = ACCESS_METHOD_WMI, + .acpi_check_dev = false, + .ramio_physical_start = 0xFE00D400, + .ramio_size = 0x600 +}; + +static const struct model_config model_v2022 = { + .registers = &ec_register_offsets_v0, + .check_embedded_controller_id = true, + .embedded_controller_id = 0x8227, + .memoryio_physical_ec_start = 0xC400, + .memoryio_size = 0x300, + .has_minifancurve = true, + .has_custom_powermode = true, + .access_method_powermode = ACCESS_METHOD_WMI, + .access_method_keyboard = ACCESS_METHOD_WMI, + .access_method_fanspeed = ACCESS_METHOD_EC, + .access_method_temperature = ACCESS_METHOD_EC, + .access_method_fancurve = ACCESS_METHOD_EC, + .access_method_fanfullspeed = ACCESS_METHOD_WMI, + .acpi_check_dev = true, + .ramio_physical_start = 0xFE00D400, + .ramio_size = 0x600 +}; + +static const struct model_config model_4gcn = { + .registers = &ec_register_offsets_v0, + .check_embedded_controller_id = true, + .embedded_controller_id = 0x8226, + .memoryio_physical_ec_start = 0xC400, + .memoryio_size = 0x300, + .has_minifancurve = true, + .has_custom_powermode = true, + .access_method_powermode = ACCESS_METHOD_WMI, + .access_method_keyboard = ACCESS_METHOD_WMI, + .access_method_fanspeed = ACCESS_METHOD_EC, + .access_method_temperature = ACCESS_METHOD_EC, + .access_method_fancurve = ACCESS_METHOD_EC, + .access_method_fanfullspeed = ACCESS_METHOD_WMI, + .acpi_check_dev = true, + .ramio_physical_start = 0xFE00D400, + .ramio_size = 0x600 +}; + +static const struct model_config model_bvcn = { + .registers = &ec_register_offsets_v0, + .check_embedded_controller_id = false, + .embedded_controller_id = 0x8226, + .memoryio_physical_ec_start = 0xC400, + .memoryio_size = 0x300, + .has_minifancurve = true, + .has_custom_powermode = true, + .access_method_powermode = ACCESS_METHOD_WMI, + .access_method_keyboard = ACCESS_METHOD_WMI, + .access_method_fanspeed = ACCESS_METHOD_WMI, + .access_method_temperature = ACCESS_METHOD_WMI, + .access_method_fancurve = ACCESS_METHOD_NO_ACCESS, + .access_method_fanfullspeed = ACCESS_METHOD_WMI, + .acpi_check_dev = false, + .ramio_physical_start = 0xFC7E0800, + .ramio_size = 0x600 +}; + +static const struct model_config model_bhcn = { + .registers = &ec_register_offsets_v0, + .check_embedded_controller_id = true, + .embedded_controller_id = 0x8226, + .memoryio_physical_ec_start = 0xC400, + .memoryio_size = 0x300, + .has_minifancurve = true, + .has_custom_powermode = false, + .access_method_powermode = ACCESS_METHOD_WMI, + .access_method_keyboard = ACCESS_METHOD_ACPI, + .access_method_fanspeed = ACCESS_METHOD_WMI, + .access_method_temperature = ACCESS_METHOD_ACPI, + .access_method_fancurve = ACCESS_METHOD_EC, + .access_method_fanfullspeed = ACCESS_METHOD_WMI, + .acpi_check_dev = true, + .ramio_physical_start = 0xFF00D400, + .ramio_size = 0x600 +}; + +static const struct model_config model_kwcn = { + .registers = &ec_register_offsets_v0, + .check_embedded_controller_id = true, + .embedded_controller_id = 0x5507, + .memoryio_physical_ec_start = 0xC400, + .memoryio_size = 0x300, + .has_minifancurve = false, + .has_custom_powermode = true, + .access_method_powermode = ACCESS_METHOD_WMI, + .access_method_keyboard = ACCESS_METHOD_WMI, + .access_method_fanspeed = ACCESS_METHOD_WMI3, + .access_method_temperature = ACCESS_METHOD_WMI3, + .access_method_fancurve = ACCESS_METHOD_WMI3, + .access_method_fanfullspeed = ACCESS_METHOD_WMI, + .acpi_check_dev = true, + .ramio_physical_start = 0xFE0B0400, + .ramio_size = 0x600 +}; + +static const struct model_config model_m0cn = { + .registers = &ec_register_offsets_v0, + .check_embedded_controller_id = true, + .embedded_controller_id = 0x5507, + .memoryio_physical_ec_start = 0xC400, + .memoryio_size = 0x300, + .has_minifancurve = true, + .has_custom_powermode = true, + .access_method_powermode = ACCESS_METHOD_WMI, + .access_method_keyboard = ACCESS_METHOD_WMI, + .access_method_fanspeed = ACCESS_METHOD_WMI3, + .access_method_temperature = ACCESS_METHOD_WMI3, + .access_method_fancurve = ACCESS_METHOD_WMI3, + .access_method_fanfullspeed = ACCESS_METHOD_WMI, + .acpi_check_dev = false, + .ramio_physical_start = 0xFE0B0400, + .ramio_size = 0x600 +}; + +static const struct model_config model_m1cn = { + .registers = &ec_register_offsets_v0, + .check_embedded_controller_id = true, + .embedded_controller_id = 0x5507, + .memoryio_physical_ec_start = 0xC400, + .memoryio_size = 0x300, + .has_minifancurve = true, + .has_custom_powermode = true, + .access_method_powermode = ACCESS_METHOD_WMI, + .access_method_keyboard = ACCESS_METHOD_WMI, + .access_method_fanspeed = ACCESS_METHOD_WMI3, + .access_method_temperature = ACCESS_METHOD_WMI3, + .access_method_fancurve = ACCESS_METHOD_WMI3, + .access_method_fanfullspeed = ACCESS_METHOD_WMI, + .acpi_check_dev = false, + .ramio_physical_start = 0xFE0B0400, + .ramio_size = 0x600 +}; + +static const struct model_config model_m2cn = { + .registers = &ec_register_offsets_v0, + .check_embedded_controller_id = true, + .embedded_controller_id = 0x8227, + .memoryio_physical_ec_start = 0xC400, + .memoryio_size = 0x300, + .has_minifancurve = true, + .has_custom_powermode = true, + .access_method_powermode = ACCESS_METHOD_WMI, + .access_method_keyboard = ACCESS_METHOD_WMI, + .access_method_fanspeed = ACCESS_METHOD_WMI3, + .access_method_temperature = ACCESS_METHOD_WMI3, + .access_method_fancurve = ACCESS_METHOD_WMI3, + .access_method_fanfullspeed = ACCESS_METHOD_WMI, + .acpi_check_dev = false, + .ramio_physical_start = 0xFE0B0400, + .ramio_size = 0x600 +}; + +static const struct model_config model_m6cn = { + .registers = &ec_register_offsets_v0, + .check_embedded_controller_id = true, + .embedded_controller_id = 0x8227, + .memoryio_physical_ec_start = 0xC400, + .memoryio_size = 0x300, + .has_minifancurve = true, + .has_custom_powermode = true, + .access_method_powermode = ACCESS_METHOD_WMI, + .access_method_keyboard = ACCESS_METHOD_WMI, + .access_method_fanspeed = ACCESS_METHOD_WMI3, + .access_method_temperature = ACCESS_METHOD_WMI3, + .access_method_fancurve = ACCESS_METHOD_WMI3, + .access_method_fanfullspeed = ACCESS_METHOD_WMI, + .acpi_check_dev = false, + .ramio_physical_start = 0xFE0B0400, + .ramio_size = 0x600 +}; + +static const struct model_config model_k1cn = { + .registers = &ec_register_offsets_v0, + .check_embedded_controller_id = true, + .embedded_controller_id = 0x5263, + .memoryio_physical_ec_start = 0xC400, + .memoryio_size = 0x300, + .has_minifancurve = false, + .has_custom_powermode = true, + .access_method_powermode = ACCESS_METHOD_WMI, + .access_method_keyboard = ACCESS_METHOD_WMI, + .access_method_fanspeed = ACCESS_METHOD_WMI3, + .access_method_temperature = ACCESS_METHOD_WMI3, + .access_method_fancurve = ACCESS_METHOD_WMI3, + .access_method_fanfullspeed = ACCESS_METHOD_WMI, + .acpi_check_dev = true, + .ramio_physical_start = 0xFE0B0400, + .ramio_size = 0x600 +}; + +static const struct model_config model_lpcn = { + .registers = &ec_register_offsets_v0, + .check_embedded_controller_id = true, + .embedded_controller_id = 0x5507, + .memoryio_physical_ec_start = 0xC400, + .memoryio_size = 0x300, + .has_minifancurve = false, + .has_custom_powermode = true, + .access_method_powermode = ACCESS_METHOD_WMI, + .access_method_keyboard = ACCESS_METHOD_WMI, + .access_method_fanspeed = ACCESS_METHOD_WMI3, + .access_method_temperature = ACCESS_METHOD_WMI3, + .access_method_fancurve = ACCESS_METHOD_WMI3, + .access_method_fanfullspeed = ACCESS_METHOD_WMI, + .acpi_check_dev = true, + .ramio_physical_start = 0xFE0B0400, + .ramio_size = 0x600 +}; + +static const struct model_config model_kfcn = { + .registers = &ec_register_offsets_v0, + .check_embedded_controller_id = true, + .embedded_controller_id = 0x8227, + .memoryio_physical_ec_start = 0xC400, + .memoryio_size = 0x300, + .has_minifancurve = false, + .has_custom_powermode = true, + .access_method_powermode = ACCESS_METHOD_WMI, + .access_method_keyboard = ACCESS_METHOD_WMI, + .access_method_fanspeed = ACCESS_METHOD_EC, + .access_method_temperature = ACCESS_METHOD_EC, + .access_method_fancurve = ACCESS_METHOD_EC, + .access_method_fanfullspeed = ACCESS_METHOD_WMI, + .acpi_check_dev = true, + .ramio_physical_start = 0xFE00D400, + .ramio_size = 0x600 +}; + +static const struct model_config model_hacn = { + .registers = &ec_register_offsets_v0, + .check_embedded_controller_id = false, + .embedded_controller_id = 0x8227, + .memoryio_physical_ec_start = 0xC400, + .memoryio_size = 0x300, + .has_minifancurve = true, + .has_custom_powermode = true, + .access_method_powermode = ACCESS_METHOD_WMI, + .access_method_keyboard = ACCESS_METHOD_WMI, + .access_method_fanspeed = ACCESS_METHOD_EC, + .access_method_temperature = ACCESS_METHOD_EC, + .access_method_fancurve = ACCESS_METHOD_EC, + .access_method_fanfullspeed = ACCESS_METHOD_WMI, + .acpi_check_dev = true, + .ramio_physical_start = 0xFE00D400, + .ramio_size = 0x600 +}; + +static const struct model_config model_k9cn = { + .registers = &ec_register_offsets_v0, + .check_embedded_controller_id = false, + .embedded_controller_id = 0x8227, + .memoryio_physical_ec_start = 0xC400, // or replace 0xC400 by 0x0400 ? + .memoryio_size = 0x300, + .has_minifancurve = true, + .has_custom_powermode = true, + .access_method_powermode = ACCESS_METHOD_WMI, + .access_method_keyboard = ACCESS_METHOD_WMI, + .access_method_fanspeed = ACCESS_METHOD_EC, + .access_method_temperature = ACCESS_METHOD_EC, + .access_method_fancurve = ACCESS_METHOD_EC, + .access_method_fanfullspeed = ACCESS_METHOD_WMI, + .acpi_check_dev = true, + .ramio_physical_start = 0xFE00D400, + .ramio_size = 0x600 +}; + +static const struct model_config model_eucn = { + .registers = &ec_register_offsets_v1, + .check_embedded_controller_id = true, + .embedded_controller_id = 0x8227, + .memoryio_physical_ec_start = 0xC400, + .memoryio_size = 0x300, + .has_minifancurve = true, + .has_custom_powermode = true, + .access_method_powermode = ACCESS_METHOD_WMI, + .access_method_keyboard = ACCESS_METHOD_WMI, + .access_method_fanspeed = ACCESS_METHOD_EC, + .access_method_temperature = ACCESS_METHOD_EC, + .access_method_fancurve = ACCESS_METHOD_EC, + .access_method_fanfullspeed = ACCESS_METHOD_WMI, + .acpi_check_dev = true, + .ramio_physical_start = 0xFE00D400, + .ramio_size = 0x600 +}; + +static const struct model_config model_fccn = { + .registers = &ec_register_offsets_ideapad_v0, + .check_embedded_controller_id = true, + .embedded_controller_id = 0x8227, + .memoryio_physical_ec_start = 0xC400, + .memoryio_size = 0x300, + .has_minifancurve = false, + .has_custom_powermode = true, + .access_method_powermode = ACCESS_METHOD_WMI, + .access_method_keyboard = ACCESS_METHOD_WMI, + .access_method_fanspeed = ACCESS_METHOD_WMI, + .access_method_temperature = ACCESS_METHOD_ACPI, + .access_method_fancurve = ACCESS_METHOD_EC2, + .access_method_fanfullspeed = ACCESS_METHOD_WMI, + .acpi_check_dev = true, + .ramio_physical_start = 0xFE00D400, + .ramio_size = 0x600 +}; + +static const struct model_config model_h3cn = { + //0xFE0B0800 + .registers = &ec_register_offsets_v1, + .check_embedded_controller_id = false, + .embedded_controller_id = 0x8227, + .memoryio_physical_ec_start = 0xC400, + .memoryio_size = 0x300, + .has_minifancurve = false, + .has_custom_powermode = false, + .access_method_powermode = ACCESS_METHOD_WMI, + // not implemented (properly) in WMI, RGB conrolled by USB + .access_method_keyboard = ACCESS_METHOD_NO_ACCESS, + // accessing fan speed is not implemented in ACPI + // a variable in the operation region (or not found) + // and not per WMI (methods returns constant 0) + .access_method_fanspeed = ACCESS_METHOD_NO_ACCESS, + .access_method_temperature = ACCESS_METHOD_WMI, + .access_method_fancurve = ACCESS_METHOD_NO_ACCESS, + .access_method_fanfullspeed = ACCESS_METHOD_WMI, + .acpi_check_dev = false, + .ramio_physical_start = 0xFE0B0800, + .ramio_size = 0x600 +}; + +static const struct model_config model_e9cn = { + //0xFE0B0800 + .registers = &ec_register_offsets_v1, + .check_embedded_controller_id = false, + .embedded_controller_id = 0x8227, + .memoryio_physical_ec_start = 0xC400, //0xFC7E0800 + .memoryio_size = 0x300, + .has_minifancurve = false, + .has_custom_powermode = false, + .access_method_powermode = ACCESS_METHOD_WMI, + // not implemented (properly) in WMI, RGB conrolled by USB + .access_method_keyboard = ACCESS_METHOD_NO_ACCESS, + // accessing fan speed is not implemented in ACPI + // a variable in the operation region (or not found) + // and not per WMI (methods returns constant 0) + .access_method_fanspeed = ACCESS_METHOD_WMI, + .access_method_temperature = ACCESS_METHOD_WMI, + .access_method_fancurve = ACCESS_METHOD_NO_ACCESS, + .access_method_fanfullspeed = ACCESS_METHOD_WMI, + .acpi_check_dev = false, + .ramio_physical_start = 0xFC7E0800, + .ramio_size = 0x600 +}; + +static const struct model_config model_8jcn = { + .registers = &ec_register_offsets_v0, + .check_embedded_controller_id = true, + .embedded_controller_id = 0x8226, + .memoryio_physical_ec_start = 0xC400, + .memoryio_size = 0x300, + .has_minifancurve = true, + .has_custom_powermode = true, + .access_method_powermode = ACCESS_METHOD_WMI, + .access_method_keyboard = ACCESS_METHOD_WMI, + .access_method_fanspeed = ACCESS_METHOD_WMI, + .access_method_temperature = ACCESS_METHOD_WMI, + .access_method_fancurve = ACCESS_METHOD_EC, + .access_method_fanfullspeed = ACCESS_METHOD_WMI, + .acpi_check_dev = false, + .ramio_physical_start = 0xFE00D400, + .ramio_size = 0x600 +}; + +static const struct model_config model_jncn = { + .registers = &ec_register_offsets_v1, + .check_embedded_controller_id = false, + .embedded_controller_id = 0x8227, + .memoryio_physical_ec_start = 0xC400, + .memoryio_size = 0x300, + .has_minifancurve = false, + .has_custom_powermode = false, + .access_method_powermode = ACCESS_METHOD_WMI, + .access_method_keyboard = ACCESS_METHOD_NO_ACCESS, + .access_method_fanspeed = ACCESS_METHOD_WMI, + .access_method_temperature = ACCESS_METHOD_WMI, + .access_method_fancurve = ACCESS_METHOD_NO_ACCESS, + .access_method_fanfullspeed = ACCESS_METHOD_WMI, + .acpi_check_dev = false, + .ramio_physical_start = 0xFC7E0800, + .ramio_size = 0x600 +}; + +// Yoga Model! +static const struct model_config model_j1cn = { + .registers = &ec_register_offsets_v0, + .check_embedded_controller_id = true, + .embedded_controller_id = 0x8227, + .memoryio_physical_ec_start = 0xC400, + .memoryio_size = 0x300, + .has_minifancurve = true, + .has_custom_powermode = true, + .access_method_powermode = ACCESS_METHOD_WMI, + .access_method_keyboard = ACCESS_METHOD_WMI, + .access_method_fanspeed = ACCESS_METHOD_EC, + .access_method_temperature = ACCESS_METHOD_EC, + .access_method_fancurve = ACCESS_METHOD_EC, + .access_method_fanfullspeed = ACCESS_METHOD_WMI, + .acpi_check_dev = true, + .ramio_physical_start = 0xFE0B0400, + .ramio_size = 0x600 +}; + +// Yoga Model! +static const struct model_config model_dmcn = { + .registers = &ec_register_offsets_v0, + .check_embedded_controller_id = true, + .embedded_controller_id = 0x8227, + .memoryio_physical_ec_start = 0xC400, + .memoryio_size = 0x300, + .has_minifancurve = true, + .has_custom_powermode = true, + .access_method_powermode = ACCESS_METHOD_WMI, + .access_method_keyboard = ACCESS_METHOD_WMI, + .access_method_fanspeed = ACCESS_METHOD_EC, + .access_method_temperature = ACCESS_METHOD_EC, + .access_method_fancurve = ACCESS_METHOD_EC, + .access_method_fanfullspeed = ACCESS_METHOD_WMI, + .acpi_check_dev = true, + .ramio_physical_start = 0xFE700D00, + .ramio_size = 0x600 +}; + +// Yoga Model! +static const struct model_config model_khcn = { + .registers = &ec_register_offsets_v0, + .check_embedded_controller_id = false, + .embedded_controller_id = 0x8227, + .memoryio_physical_ec_start = 0xC400, + .memoryio_size = 0x300, + .has_minifancurve = true, + .has_custom_powermode = true, + .access_method_powermode = ACCESS_METHOD_EC, + .access_method_keyboard = ACCESS_METHOD_WMI, + .access_method_fanspeed = ACCESS_METHOD_EC, + .access_method_temperature = ACCESS_METHOD_EC, + .access_method_fancurve = ACCESS_METHOD_EC, + .access_method_fanfullspeed = ACCESS_METHOD_WMI, + .acpi_check_dev = false, + .ramio_physical_start = 0xFE0B0400, + .ramio_size = 0x600 +}; + +// LOQ Model +static const struct model_config model_lzcn = { + .registers = &ec_register_offsets_loq_v0, + .check_embedded_controller_id = true, + .embedded_controller_id = 0x8227, + .memoryio_physical_ec_start = 0xC400, + .memoryio_size = 0x300, + .has_minifancurve = true, + .has_custom_powermode = true, + .access_method_powermode = ACCESS_METHOD_WMI, + .access_method_keyboard = ACCESS_METHOD_WMI2, + .access_method_fanspeed = ACCESS_METHOD_WMI3, + .access_method_temperature = ACCESS_METHOD_WMI3, + .access_method_fancurve = ACCESS_METHOD_EC3, + .access_method_fanfullspeed = ACCESS_METHOD_WMI3, + .acpi_check_dev = false, + .ramio_physical_start = 0xFE0B0400, + .ramio_size = 0x600 +}; + +static const struct dmi_system_id denylist[] = { {} }; + +static const struct dmi_system_id optimistic_allowlist[] = { + { + // Release year: 2021 + // Generation: 6 + // Name: Legion 5, Legion 5 pro, Legion 7 + // Family: Legion 5 15ACH6H, ... + .ident = "GKCN", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_BIOS_VERSION, "GKCN"), + }, + .driver_data = (void *)&model_v0 + }, + { + // Release year: 2020 + .ident = "EUCN", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_BIOS_VERSION, "EUCN"), + }, + .driver_data = (void *)&model_eucn + }, + { + // Release year: 2020 + .ident = "EFCN", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_BIOS_VERSION, "EFCN"), + }, + .driver_data = (void *)&model_v0 + }, + { + // Release year: 2020 + .ident = "FSCN", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_BIOS_VERSION, "FSCN"), + }, + .driver_data = (void *)&model_v0 + }, + { + // Release year: 2021 + .ident = "HHCN", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_BIOS_VERSION, "HHCN"), + }, + .driver_data = (void *)&model_v0 + }, + { + // Release year: 2022 + .ident = "H1CN", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_BIOS_VERSION, "H1CN"), + }, + .driver_data = (void *)&model_v0 + }, + { + // Release year: 2022 + .ident = "J2CN", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_BIOS_VERSION, "J2CN"), + }, + .driver_data = (void *)&model_v0 + }, + { + // Release year: 2022 + .ident = "JUCN", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_BIOS_VERSION, "JUCN"), + }, + .driver_data = (void *)&model_v0 + }, + { + // Release year: 2022 + .ident = "KFCN", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_BIOS_VERSION, "KFCN"), + }, + .driver_data = (void *)&model_kfcn + }, + { + // Release year: 2021 + .ident = "HACN", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_BIOS_VERSION, "HACN"), + }, + .driver_data = (void *)&model_hacn + }, + { + // Release year: 2021 + .ident = "G9CN", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_BIOS_VERSION, "G9CN"), + }, + .driver_data = (void *)&model_v0 + }, + { + // Release year: 2022 + .ident = "K9CN", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_BIOS_VERSION, "K9CN"), + }, + .driver_data = (void *)&model_k9cn + }, + { + // e.g. IdeaPad Gaming 3 15ARH05 + .ident = "FCCN", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_BIOS_VERSION, "FCCN"), + }, + .driver_data = (void *)&model_fccn + }, + { + // e.g. IdeaPad Gaming 3 15ARH05 (8K21) + .ident = "H4CN", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_BIOS_VERSION, "H4CN"), + }, + .driver_data = (void *)&model_fccn + }, + { + // e.g. Ideapad Gaming 3 15ACH6 + .ident = "H3CN", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_BIOS_VERSION, "H3CN"), + }, + .driver_data = (void *)&model_h3cn + }, + { + // e.g. IdeaPad Gaming 3 15ARH7 (2022) + .ident = "JNCN", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_BIOS_VERSION, "JNCN"), + }, + .driver_data = (void *)&model_jncn + }, + { + // 2020, seems very different in ACPI dissassembly + .ident = "E9CN", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_BIOS_VERSION, "E9CN"), + }, + .driver_data = (void *)&model_e9cn + }, + { + // e.g. Legion Y7000 (older version) + .ident = "8JCN", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_BIOS_VERSION, "8JCN"), + }, + .driver_data = (void *)&model_8jcn + }, + { + // e.g. Legion 7i Pro 2023 + .ident = "KWCN", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_BIOS_VERSION, "KWCN"), + }, + .driver_data = (void *)&model_kwcn + }, + { + // e.g. Legion Pro 5 2023 or R9000P + .ident = "LPCN", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_BIOS_VERSION, "LPCN"), + }, + .driver_data = (void *)&model_lpcn + }, + { + // e.g. Lenovo Legion 5i/Y7000 2019 PG0 + .ident = "BHCN", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_BIOS_VERSION, "BHCN"), + }, + .driver_data = (void *)&model_bhcn + }, + { + // e.g. Lenovo 7 16IAX7 + .ident = "K1CN", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_BIOS_VERSION, "K1CN"), + }, + .driver_data = (void *)&model_k1cn + }, + { + // e.g. Legion Y720 + .ident = "4GCN", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_BIOS_VERSION, "4GCN"), + }, + .driver_data = (void *)&model_4gcn + }, + { + // e.g. Legion Slim 5 16APH8 2023 + .ident = "M3CN", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_BIOS_VERSION, "M3CN"), + }, + .driver_data = (void *)&model_lpcn + }, + { + // e.g. Legion Y7000p-1060 + .ident = "9VCN", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_BIOS_VERSION, "9VCN"), + }, + .driver_data = (void *)&model_9vcn + }, + { + // e.g. Legion Y9000X + .ident = "JYCN", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_BIOS_VERSION, "JYCN"), + }, + .driver_data = (void *)&model_v2022 + }, + { + // e.g. Legion Y740-15IRH, older model e.g. with GTX 1660 + .ident = "BVCN", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_BIOS_VERSION, "BVCN"), + }, + .driver_data = (void *)&model_bvcn + }, + { + // e.g. Legion 5 Pro 16IAH7H with a RTX 3070 Ti + .ident = "J2CN", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_BIOS_VERSION, "J2CN"), + }, + .driver_data = (void *)&model_j2cn + }, + { + // e.g. Lenovo Yoga 7 16IAH7 with GPU Intel DG2 Arc A370M + .ident = "J1CN", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_BIOS_VERSION, "J1CN"), + }, + .driver_data = (void *)&model_j1cn + }, + { + // e.g. Legion Slim 7 16IRH8 (2023) with RTX 4070 + .ident = "M0CN", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_BIOS_VERSION, "M0CN"), + }, + .driver_data = (void *)&model_m0cn + }, + { + // e.g. Legion Slim 7 16IRH8 (2023) AMD Ryzen 7 7840HS with RTX 4060 + .ident = "M1CN", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_BIOS_VERSION, "M1CN"), + }, + .driver_data = (void *)&model_m1cn + }, + { + // e.g. Legion Slim 5 16IRH8 (2023) with RTX 4070 + .ident = "M2CN", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_BIOS_VERSION, "M2CN"), + }, + .driver_data = (void *)&model_m2cn + }, + { + // e.g. Lenovo Yoga Slim 7 gen 8 (2023) + .ident = "M6CN", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_BIOS_VERSION, "M6CN"), + }, + .driver_data = (void *)&model_m6cn + }, + { + // e.g. Yoga Slim 7-14ARE05 + .ident = "DMCN", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_BIOS_VERSION, "DMCN"), + }, + .driver_data = (void *)&model_dmcn + }, + { + // e.g. Yoga Slim 7 Pro 14ARH7 + .ident = "KHCN", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_BIOS_VERSION, "KHCN"), + }, + .driver_data = (void *)&model_khcn + }, + { + // e.g. LOQ 15IRH8 + .ident = "LZCN", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_BIOS_VERSION, "LZCN"), + }, + .driver_data = (void *)&model_lzcn + }, + {} +}; + +/* ================================= */ +/* ACPI and WMI access */ +/* ================================= */ + +// function from ideapad-laptop.c +static int eval_int(acpi_handle handle, const char *name, unsigned long *res) +{ + unsigned long long result; + acpi_status status; + + status = acpi_evaluate_integer(handle, (char *)name, NULL, &result); + if (ACPI_FAILURE(status)) + return -EIO; + + *res = result; + + return 0; +} + +// function from ideapad-laptop.c +static int exec_simple_method(acpi_handle handle, const char *name, + unsigned long arg) +{ + acpi_status status = + acpi_execute_simple_method(handle, (char *)name, arg); + + return ACPI_FAILURE(status) ? -EIO : 0; +} + +// function from ideapad-laptop.c +static int exec_sbmc(acpi_handle handle, unsigned long arg) +{ + // \_SB.PCI0.LPC0.EC0.VPC0.SBMC + return exec_simple_method(handle, "VPC0.SBMC", arg); +} + +//static int eval_qcho(acpi_handle handle, unsigned long *res) +//{ +// // \_SB.PCI0.LPC0.EC0.QCHO +// return eval_int(handle, "QCHO", res); +//} + +static int eval_gbmd(acpi_handle handle, unsigned long *res) +{ + return eval_int(handle, "VPC0.GBMD", res); +} + +static int eval_spmo(acpi_handle handle, unsigned long *res) +{ + // \_SB.PCI0.LPC0.EC0.QCHO + return eval_int(handle, "VPC0.BTSM", res); +} + +static int acpi_process_buffer_to_ints(const char *id_name, int id_nr, + acpi_status status, + struct acpi_buffer *out_buffer, u8 *res, + size_t ressize) +{ + // seto to NULL call kfree on NULL if next function call fails + union acpi_object *out = NULL; + size_t i; + int error = 0; + + if (ACPI_FAILURE(status)) { + pr_info("ACPI evaluation error for: %s:%d\n", id_name, id_nr); + error = -EFAULT; + goto err; + } + + out = out_buffer->pointer; + if (!out) { + pr_info("Unexpected ACPI result for %s:%d\n", id_name, id_nr); + error = -AE_ERROR; + goto err; + } + + if (out->type != ACPI_TYPE_BUFFER || out->buffer.length != ressize) { + pr_info("Unexpected ACPI result for %s:%d: expected type %d but got %d; expected length %lu but got %u;\n", + id_name, id_nr, ACPI_TYPE_BUFFER, out->type, ressize, + out->buffer.length); + error = -AE_ERROR; + goto err; + } + +// Reduced verbosity (only printing when ACPI result have bad parameters) +// pr_info("ACPI result for %s:%d: ACPI buffer length: %u\n", id_name, +// id_nr, out->buffer.length); + + for (i = 0; i < ressize; ++i) + res[i] = out->buffer.pointer[i]; + error = 0; + +err: + kfree(out); + return error; +} + +//static int exec_ints(acpi_handle handle, const char *method_name, +// struct acpi_object_list *params, u8 *res, size_t ressize) +//{ +// acpi_status status; +// struct acpi_buffer out_buffer = { ACPI_ALLOCATE_BUFFER, NULL }; + +// status = acpi_evaluate_object(handle, (acpi_string)method_name, params, +// &out_buffer); + +// return acpi_process_buffer_to_ints(method_name, 0, status, &out_buffer, +// res, ressize); +//} + +static int wmi_exec_ints(const char *guid, u8 instance, u32 method_id, + const struct acpi_buffer *params, u8 *res, + size_t ressize) +{ + acpi_status status; + struct acpi_buffer out_buffer = { ACPI_ALLOCATE_BUFFER, NULL }; + + status = wmi_evaluate_method(guid, instance, method_id, params, + &out_buffer); + return acpi_process_buffer_to_ints(guid, method_id, status, &out_buffer, + res, ressize); +} + +static int wmi_exec_int(const char *guid, u8 instance, u32 method_id, + const struct acpi_buffer *params, unsigned long *res) +{ + acpi_status status; + struct acpi_buffer out_buffer = { ACPI_ALLOCATE_BUFFER, NULL }; + // set to NULL and call kfree on NULL if next function call fails + union acpi_object *out = NULL; + int error = 0; + + status = wmi_evaluate_method(guid, instance, method_id, params, + &out_buffer); + + if (ACPI_FAILURE(status)) { + pr_info("WMI evaluation error for: %s:%d\n", guid, method_id); + error = -EFAULT; + goto err; + } + + out = out_buffer.pointer; + if (!out) { + pr_info("Unexpected ACPI result for %s:%d", guid, method_id); + error = -AE_ERROR; + goto err; + } + + if (out->type != ACPI_TYPE_INTEGER) { + pr_info("Unexpected ACPI result for %s:%d: expected type %d but got %d\n", + guid, method_id, ACPI_TYPE_INTEGER, out->type); + error = -AE_ERROR; + goto err; + } + + *res = out->integer.value; + error = 0; + +err: + kfree(out); + return error; +} + +static int wmi_exec_noarg_int(const char *guid, u8 instance, u32 method_id, + unsigned long *res) +{ + struct acpi_buffer params; + + params.length = 0; + params.pointer = NULL; + return wmi_exec_int(guid, instance, method_id, ¶ms, res); +} + +static int wmi_exec_noarg_ints(const char *guid, u8 instance, u32 method_id, + u8 *res, size_t ressize) +{ + struct acpi_buffer params; + + params.length = 0; + params.pointer = NULL; + return wmi_exec_ints(guid, instance, method_id, ¶ms, res, ressize); +} + +static int wmi_exec_arg(const char *guid, u8 instance, u32 method_id, void *arg, + size_t arg_size) +{ + struct acpi_buffer params; + acpi_status status; + + params.length = arg_size; + params.pointer = arg; + status = wmi_evaluate_method(guid, instance, method_id, ¶ms, NULL); + + if (ACPI_FAILURE(status)) + return -EIO; + return 0; +} + +/* ================================= */ +/* Lenovo WMI config */ +/* ================================= */ +#define LEGION_WMI_GAMEZONE_GUID "887B54E3-DDDC-4B2C-8B88-68A26A8835D0" +// GPU over clock +#define WMI_METHOD_ID_ISSUPPORTGPUOC 4 + +// Fan speed +// only fully implemented for some models here +// often implemented in other classes and methods too +// below +#define WMI_METHOD_ID_GETFAN1SPEED 8 +#define WMI_METHOD_ID_GETFAN2SPEED 9 + +// Version of ACPI +#define WMI_METHOD_ID_GETVERSION 11 +// Does it support CPU overclock? +#define WMI_METHOD_ID_ISSUPPORTCPUOC 14 +// Temperatures +// only fully implemented for some models here +// often implemented in other classes and methods too +// below +#define WMI_METHOD_ID_GETCPUTEMP 18 +#define WMI_METHOD_ID_GETGPUTEMP 19 + +// two state keyboard light +#define WMI_METHOD_ID_GETKEYBOARDLIGHT 37 +#define WMI_METHOD_ID_SETKEYBOARDLIGHT 36 +// toggle win key +// 0 = win key enabled; 1 = win key disabled +#define WMI_METHOD_ID_ISSUPPORTDISABLEWINKEY 21 +#define WMI_METHOD_ID_GETWINKEYSTATUS 23 +#define WMI_METHOD_ID_SETWINKEYSTATUS 22 +// toggle touchpad +//0 = touchpad enabled; 1 = touchpad disabled +#define WMI_METHOD_ID_ISSUPPORTDISABLETP 24 +#define WMI_METHOD_ID_GETTPSTATUS 26 +#define WMI_METHOD_ID_SETTPSTATUS 25 +// GSync +#define WMI_METHOD_ID_ISSUPPORTGSYNC 40 +#define WMI_METHOD_ID_GETGSYNCSTATUS 41 +#define WMI_METHOD_ID_SETGSYNCSTATUS 42 +//smartFanMode = powermode +#define WMI_METHOD_ID_ISSUPPORTSMARTFAN 49 +#define WMI_METHOD_ID_GETSMARTFANMODE 45 +#define WMI_METHOD_ID_SETSMARTFANMODE 44 +// power charge mode +#define WMI_METHOD_ID_GETPOWERCHARGEMODE 47 +// overdrive of display to reduce latency +// 0=off, 1=on +#define WMI_METHOD_ID_ISSUPPORTOD 49 +#define WMI_METHOD_ID_GETODSTATUS 50 +#define WMI_METHOD_ID_SETODSTATUS 51 +// thermal mode = power mode used for cooling +#define WMI_METHOD_ID_GETTHERMALMODE 55 +// get max frequency of core 0 +#define WMI_METHOD_ID_GETCPUMAXFREQUENCY 60 +// check if AC adapter has enough power to overclock +#define WMI_METHOD_ID_ISACFITFOROC 62 +// set iGPU (GPU packaged with CPU) state +#define WMI_METHOD_ID_ISSUPPORTIGPUMODE 63 +#define WMI_METHOD_ID_GETIGPUMODESTATUS 64 +#define WMI_METHOD_ID_SETIGPUMODESTATUS 65 +#define WMI_METHOD_ID_NOTIFYDGPUSTATUS 66 +enum IGPUState { + IGPUState_default = 0, + IGPUState_iGPUOnly = 1, + IGPUState_auto = 2 +}; + +#define WMI_GUID_LENOVO_CPU_METHOD "14afd777-106f-4c9b-b334-d388dc7809be" +#define WMI_METHOD_ID_CPU_GET_SUPPORT_OC_STATUS 15 +#define WMI_METHOD_ID_CPU_GET_OC_STATUS 1 +#define WMI_METHOD_ID_CPU_SET_OC_STATUS 2 + +// ppt limit slow +#define WMI_METHOD_ID_CPU_GET_SHORTTERM_POWERLIMIT 3 +#define WMI_METHOD_ID_CPU_SET_SHORTTERM_POWERLIMIT 4 +// ppt stapm +#define WMI_METHOD_ID_CPU_GET_LONGTERM_POWERLIMIT 5 +#define WMI_METHOD_ID_CPU_SET_LONGTERM_POWERLIMIT 6 +// default power limit +#define WMI_METHOD_ID_CPU_GET_DEFAULT_POWERLIMIT 7 +// peak power limit +#define WMI_METHOD_ID_CPU_GET_PEAK_POWERLIMIT 8 +#define WMI_METHOD_ID_CPU_SET_PEAK_POWERLIMIT 9 +// apu sppt powerlimit +#define WMI_METHOD_ID_CPU_GET_APU_SPPT_POWERLIMIT 12 +#define WMI_METHOD_ID_CPU_SET_APU_SPPT_POWERLIMIT 13 +// cross loading powerlimit +#define WMI_METHOD_ID_CPU_GET_CROSS_LOADING_POWERLIMIT 16 +#define WMI_METHOD_ID_CPU_SET_CROSS_LOADING_POWERLIMIT 17 + +#define WMI_GUID_LENOVO_GPU_METHOD "da7547f1-824d-405f-be79-d9903e29ced7" +// overclock GPU possible +#define WMI_METHOD_ID_GPU_GET_OC_STATUS 1 +#define WMI_METHOD_ID_GPU_SET_OC_STATUS 2 +// dynamic boost power +#define WMI_METHOD_ID_GPU_GET_PPAB_POWERLIMIT 3 +#define WMI_METHOD_ID_GPU_SET_PPAB_POWERLIMIT 4 +// configurable TGP (power) +#define WMI_METHOD_ID_GPU_GET_CTGP_POWERLIMIT 5 +#define WMI_METHOD_ID_GPU_SET_CTGP_POWERLIMIT 6 +// ppab/ctgp powerlimit +#define WMI_METHOD_ID_GPU_GET_DEFAULT_PPAB_CTGP_POWERLIMIT 7 +// temperature limit +#define WMI_METHOD_ID_GPU_GET_TEMPERATURE_LIMIT 8 +#define WMI_METHOD_ID_GPU_SET_TEMPERATURE_LIMIT 9 +// boost clock +#define WMI_METHOD_ID_GPU_GET_BOOST_CLOCK 10 + +#define WMI_GUID_LENOVO_FAN_METHOD "92549549-4bde-4f06-ac04-ce8bf898dbaa" +// set fan to maximal speed; dust cleaning mode +// only works in custom power mode +#define WMI_METHOD_ID_FAN_GET_FULLSPEED 1 +#define WMI_METHOD_ID_FAN_SET_FULLSPEED 2 +// max speed of fan +#define WMI_METHOD_ID_FAN_GET_MAXSPEED 3 +#define WMI_METHOD_ID_FAN_SET_MAXSPEED 4 +// fan table in custom mode +#define WMI_METHOD_ID_FAN_GET_TABLE 5 +#define WMI_METHOD_ID_FAN_SET_TABLE 6 +// get speed of fans +#define WMI_METHOD_ID_FAN_GETCURRENTFANSPEED 7 +// get temperatures of CPU and GPU used for controlling cooling +#define WMI_METHOD_ID_FAN_GETCURRENTSENSORTEMPERATURE 8 + +// do not implement following +// #define WMI_METHOD_ID_Fan_SetCurrentFanSpeed 9 + +#define LEGION_WMI_KBBACKLIGHT_GUID "8C5B9127-ECD4-4657-980F-851019F99CA5" +// access the keyboard backlight with 3 states +#define WMI_METHOD_ID_KBBACKLIGHTGET 0x1 +#define WMI_METHOD_ID_KBBACKLIGHTSET 0x2 + +// new method in newer methods to get or set most of the values +// with the two methods GetFeatureValue or SetFeatureValue. +// They are called like GetFeatureValue(feature_id) where +// feature_id is a id for the feature +#define LEGION_WMI_LENOVO_OTHER_METHOD_GUID \ + "dc2a8805-3a8c-41ba-a6f7-092e0089cd3b" +#define WMI_METHOD_ID_GET_FEATURE_VALUE 17 +#define WMI_METHOD_ID_SET_FEATURE_VALUE 18 + +enum OtherMethodFeature { + OtherMethodFeature_U1 = 0x010000, //->PC00.LPCB.EC0.REJF + OtherMethodFeature_U2 = 0x0F0000, //->C00.PEG1.PXP._STA? + OtherMethodFeature_U3 = 0x030000, //->PC00.LPCB.EC0.FLBT? + OtherMethodFeature_CPU_SHORT_TERM_POWER_LIMIT = 0x01010000, + OtherMethodFeature_CPU_LONG_TERM_POWER_LIMIT = 0x01020000, + OtherMethodFeature_CPU_PEAK_POWER_LIMIT = 0x01030000, + OtherMethodFeature_CPU_TEMPERATURE_LIMIT = 0x01040000, + + OtherMethodFeature_APU_PPT_POWER_LIMIT = 0x01050000, + + OtherMethodFeature_CPU_CROSS_LOAD_POWER_LIMIT = 0x01060000, + OtherMethodFeature_CPU_L1_TAU = 0x01070000, + + OtherMethodFeature_GPU_POWER_BOOST = 0x02010000, + OtherMethodFeature_GPU_cTGP = 0x02020000, + OtherMethodFeature_GPU_TEMPERATURE_LIMIT = 0x02030000, + OtherMethodFeature_GPU_POWER_TARGET_ON_AC_OFFSET_FROM_BASELINE = + 0x02040000, + + OtherMethodFeature_FAN_SPEED_1 = 0x04030001, + OtherMethodFeature_FAN_SPEED_2 = 0x04030002, + + OtherMethodFeature_C_U1 = 0x05010000, + OtherMethodFeature_TEMP_CPU = 0x05040000, + OtherMethodFeature_TEMP_GPU = 0x05050000, +}; + +static ssize_t wmi_other_method_get_value(enum OtherMethodFeature feature_id, + int *value) +{ + struct acpi_buffer params; + int error; + unsigned long res; + u32 param1 = feature_id; + + params.length = sizeof(param1); + params.pointer = ¶m1; + error = wmi_exec_int(LEGION_WMI_LENOVO_OTHER_METHOD_GUID, 0, + WMI_METHOD_ID_GET_FEATURE_VALUE, ¶ms, &res); + if (!error) + *value = res; + return error; +} + +/* =================================== */ +/* EC RAM Access with memory mapped IO */ +/* =================================== */ + +struct ecram_memoryio { + // TODO: start of remapped memory in EC RAM is assumed to be 0 + // u16 ecram_start; + + // physical address of remapped IO, depends on model and firmware + phys_addr_t physical_start; + // start adress of region in ec memory + phys_addr_t physical_ec_start; + // virtual address of remapped IO + u8 *virtual_start; + // size of remapped access + size_t size; +}; + +/** + * physical_start : corresponds to EC RAM 0 inside EC + * size: size of remapped region + * + * strong exception safety + */ +static ssize_t ecram_memoryio_init(struct ecram_memoryio *ec_memoryio, + phys_addr_t physical_start, + phys_addr_t physical_ec_start, size_t size) +{ + void *virtual_start = ioremap(physical_start, size); + + if (!IS_ERR_OR_NULL(virtual_start)) { + ec_memoryio->virtual_start = virtual_start; + ec_memoryio->physical_start = physical_start; + ec_memoryio->physical_ec_start = physical_ec_start; + ec_memoryio->size = size; + pr_info("Successfully mapped embedded controller: 0x%llx (in RAM)/0x%llx (in EC) to virtual 0x%p\n", + ec_memoryio->physical_start, + ec_memoryio->physical_ec_start, + ec_memoryio->virtual_start); + } else { + pr_info("Error mapping embedded controller memory at 0x%llx\n", + physical_start); + return -ENOMEM; + } + return 0; +} + +static void ecram_memoryio_exit(struct ecram_memoryio *ec_memoryio) +{ + if (ec_memoryio->virtual_start != NULL) { + pr_info("Unmapping embedded controller memory at 0x%llx (in RAM)/0x%llx (in EC) at virtual 0x%p\n", + ec_memoryio->physical_start, + ec_memoryio->physical_ec_start, + ec_memoryio->virtual_start); + iounmap(ec_memoryio->virtual_start); + ec_memoryio->virtual_start = NULL; + } +} + +/* Read a byte from the EC RAM. + * + * Return status because of commong signature for alle + * methods to access EC RAM. + */ +static ssize_t ecram_memoryio_read(const struct ecram_memoryio *ec_memoryio, + u16 ec_offset, u8 *value) +{ + if (ec_offset < ec_memoryio->physical_ec_start) { + pr_info("Unexpected read at offset %d into EC RAM\n", + ec_offset); + return -1; + } + *value = *(ec_memoryio->virtual_start + + (ec_offset - ec_memoryio->physical_ec_start)); + return 0; +} + +/* Write a byte to the EC RAM. + * + * Return status because of commong signature for alle + * methods to access EC RAM. + */ +ssize_t ecram_memoryio_write(const struct ecram_memoryio *ec_memoryio, + u16 ec_offset, u8 value) +{ + if (ec_offset < ec_memoryio->physical_ec_start) { + pr_info("Unexpected write at offset %d into EC RAM\n", + ec_offset); + return -1; + } + *(ec_memoryio->virtual_start + + (ec_offset - ec_memoryio->physical_ec_start)) = value; + return 0; +} + +/* ================================= */ +/* EC RAM Access with port-mapped IO */ +/* ================================= */ + +/* + * See datasheet of e.g. IT8502E/F/G, e.g. + * 6.2 Plug and Play Configuration (PNPCFG) + * + * Depending on configured BARDSEL register + * the ports + * ECRAM_PORTIO_ADDR_PORT and + * ECRAM_PORTIO_DATA_PORT + * are configured. + * + * By performing IO on these ports one can + * read/write to registers in the EC. + * + * "To access a register of PNPCFG, write target index to + * address port and access this PNPCFG register via + * data port" [datasheet, 6.2 Plug and Play Configuration] + */ + +// IO ports used to write to communicate with embedded controller +// Start of used ports +#define ECRAM_PORTIO_START_PORT 0x4E +// Number of used ports +#define ECRAM_PORTIO_PORTS_SIZE 2 +// Port used to specify address in EC RAM to read/write +// 0x4E/0x4F is the usual port for IO super controller +// 0x2E/0x2F also common (ITE can also be configured to use these) +#define ECRAM_PORTIO_ADDR_PORT 0x4E +// Port to send/receive the value to write/read +#define ECRAM_PORTIO_DATA_PORT 0x4F +// Name used to request ports +#define ECRAM_PORTIO_NAME "legion" + +struct ecram_portio { + /* protects read/write to EC RAM performed + * as a certain sequence of outb, inb + * commands on the IO ports. There can + * be at most one. + */ + struct mutex io_port_mutex; +}; + +static ssize_t ecram_portio_init(struct ecram_portio *ec_portio) +{ + if (!request_region(ECRAM_PORTIO_START_PORT, ECRAM_PORTIO_PORTS_SIZE, + ECRAM_PORTIO_NAME)) { + pr_info("Cannot init ecram_portio the %x ports starting at %x\n", + ECRAM_PORTIO_PORTS_SIZE, ECRAM_PORTIO_START_PORT); + return -ENODEV; + } + //pr_info("Reserved %x ports starting at %x\n", ECRAM_PORTIO_PORTS_SIZE, ECRAM_PORTIO_START_PORT); + mutex_init(&ec_portio->io_port_mutex); + return 0; +} + +static void ecram_portio_exit(struct ecram_portio *ec_portio) +{ + release_region(ECRAM_PORTIO_START_PORT, ECRAM_PORTIO_PORTS_SIZE); +} + +/* Read a byte from the EC RAM. + * + * Return status because of commong signature for alle + * methods to access EC RAM. + */ +static ssize_t ecram_portio_read(struct ecram_portio *ec_portio, u16 offset, + u8 *value) +{ + mutex_lock(&ec_portio->io_port_mutex); + + outb(0x2E, ECRAM_PORTIO_ADDR_PORT); + outb(0x11, ECRAM_PORTIO_DATA_PORT); + outb(0x2F, ECRAM_PORTIO_ADDR_PORT); + // TODO: no explicit cast between types seems to be sometimes + // done and sometimes not + outb((u8)((offset >> 8) & 0xFF), ECRAM_PORTIO_DATA_PORT); + + outb(0x2E, ECRAM_PORTIO_ADDR_PORT); + outb(0x10, ECRAM_PORTIO_DATA_PORT); + outb(0x2F, ECRAM_PORTIO_ADDR_PORT); + outb((u8)(offset & 0xFF), ECRAM_PORTIO_DATA_PORT); + + outb(0x2E, ECRAM_PORTIO_ADDR_PORT); + outb(0x12, ECRAM_PORTIO_DATA_PORT); + outb(0x2F, ECRAM_PORTIO_ADDR_PORT); + *value = inb(ECRAM_PORTIO_DATA_PORT); + + mutex_unlock(&ec_portio->io_port_mutex); + return 0; +} + +/* Write a byte to the EC RAM. + * + * Return status because of commong signature for alle + * methods to access EC RAM. + */ +static ssize_t ecram_portio_write(struct ecram_portio *ec_portio, u16 offset, + u8 value) +{ + mutex_lock(&ec_portio->io_port_mutex); + + outb(0x2E, ECRAM_PORTIO_ADDR_PORT); + outb(0x11, ECRAM_PORTIO_DATA_PORT); + outb(0x2F, ECRAM_PORTIO_ADDR_PORT); + // TODO: no explicit cast between types seems to be sometimes + // done and sometimes not + outb((u8)((offset >> 8) & 0xFF), ECRAM_PORTIO_DATA_PORT); + + outb(0x2E, ECRAM_PORTIO_ADDR_PORT); + outb(0x10, ECRAM_PORTIO_DATA_PORT); + outb(0x2F, ECRAM_PORTIO_ADDR_PORT); + outb((u8)(offset & 0xFF), ECRAM_PORTIO_DATA_PORT); + + outb(0x2E, ECRAM_PORTIO_ADDR_PORT); + outb(0x12, ECRAM_PORTIO_DATA_PORT); + outb(0x2F, ECRAM_PORTIO_ADDR_PORT); + outb(value, ECRAM_PORTIO_DATA_PORT); + + mutex_unlock(&ec_portio->io_port_mutex); + // TODO: remove this + //pr_info("Writing %d to addr %x\n", value, offset); + return 0; +} + +/* =================================== */ +/* EC RAM Access */ +/* =================================== */ + +struct ecram { + struct ecram_portio portio; +}; + +static ssize_t ecram_init(struct ecram *ecram, + phys_addr_t memoryio_ec_physical_start, + size_t region_size) +{ + ssize_t err; + + err = ecram_portio_init(&ecram->portio); + if (err) { + pr_info("Failed ecram_portio_init\n"); + goto err_ecram_portio_init; + } + + return 0; + +err_ecram_portio_init: + return err; +} + +static void ecram_exit(struct ecram *ecram) +{ + pr_info("Unloading legion ecram\n"); + ecram_portio_exit(&ecram->portio); + pr_info("Unloading legion ecram done\n"); +} + +/** Read from EC RAM + * ecram_offset address on the EC + */ +static u8 ecram_read(struct ecram *ecram, u16 ecram_offset) +{ + u8 value; + int err; + + err = ecram_portio_read(&ecram->portio, ecram_offset, &value); + if (err) + pr_info("Error reading EC RAM at 0x%x.\n", ecram_offset); + return value; +} + +static void ecram_write(struct ecram *ecram, u16 ecram_offset, u8 value) +{ + int err; + + if (ec_readonly) { + pr_info("Skipping writing EC RAM to 0x%x: Read-Only.\n", + ecram_offset); + return; + } + err = ecram_portio_write(&ecram->portio, ecram_offset, value); + if (err) + pr_info("Error writing EC RAM to 0x%x: Read-Only.\n", ecram_offset); +} + +/* =============================== */ +/* Reads from EC */ +/* =============================== */ + +static u16 read_ec_id(struct ecram *ecram, const struct model_config *model) +{ + u8 id1 = ecram_read(ecram, model->registers->ECHIPID1); + u8 id2 = ecram_read(ecram, model->registers->ECHIPID2); + + return (id1 << 8) + id2; +} + +static u16 read_ec_version(struct ecram *ecram, + const struct model_config *model) +{ + u8 vers = ecram_read(ecram, model->registers->ECHIPVER); + u8 debug = ecram_read(ecram, model->registers->ECDEBUG); + + return (vers << 8) + debug; +} + +/* ============================= */ +/* Data model for sensor values */ +/* ============================= */ + +struct sensor_values { + u16 fan1_rpm; // current speed in rpm of fan 1 + u16 fan2_rpm; // current speed in rpm of fan2 + u16 fan1_target_rpm; // target speed in rpm of fan 1 + u16 fan2_target_rpm; // target speed in rpm of fan 2 + u8 cpu_temp_celsius; // cpu temperature in celcius + u8 gpu_temp_celsius; // gpu temperature in celcius + u8 ic_temp_celsius; // ic temperature in celcius +}; + +enum SENSOR_ATTR { + SENSOR_CPU_TEMP_ID = 1, + SENSOR_GPU_TEMP_ID = 2, + SENSOR_IC_TEMP_ID = 3, + SENSOR_FAN1_RPM_ID = 4, + SENSOR_FAN2_RPM_ID = 5, + SENSOR_FAN1_TARGET_RPM_ID = 6, + SENSOR_FAN2_TARGET_RPM_ID = 7 +}; + +/* ============================= */ +/* Data model for fan curve */ +/* ============================= */ + +struct fancurve_point { + // rpm1 devided by 100 + u8 rpm1_raw; + // rpm2 devided by 100 + u8 rpm2_raw; + // >=2 , <=5 (lower is faster); must increase by level + u8 accel; + // >=2 , <=5 (lower is faster); must increase by level + u8 decel; + + // min must be lower than or equal to max + // last level max must be 127 + // <=127 cpu max temp for this level; must increase by level + u8 cpu_max_temp_celsius; + // <=127 cpu min temp for this level; must increase by level + u8 cpu_min_temp_celsius; + // <=127 gpu min temp for this level; must increase by level + u8 gpu_max_temp_celsius; + // <=127 gpu max temp for this level; must increase by level + u8 gpu_min_temp_celsius; + // <=127 ic max temp for this level; must increase by level + u8 ic_max_temp_celsius; + // <=127 ic max temp for this level; must increase by level + u8 ic_min_temp_celsius; +}; + +enum FANCURVE_ATTR { + FANCURVE_ATTR_PWM1 = 1, + FANCURVE_ATTR_PWM2 = 2, + FANCURVE_ATTR_CPU_TEMP = 3, + FANCURVE_ATTR_CPU_HYST = 4, + FANCURVE_ATTR_GPU_TEMP = 5, + FANCURVE_ATTR_GPU_HYST = 6, + FANCURVE_ATTR_IC_TEMP = 7, + FANCURVE_ATTR_IC_HYST = 8, + FANCURVE_ATTR_ACCEL = 9, + FANCURVE_ATTR_DECEL = 10, + FANCURVE_SIZE = 11, + FANCURVE_MINIFANCURVE_ON_COOL = 12 +}; + +// used for clearing table entries +static const struct fancurve_point fancurve_point_zero = { 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0 }; + +struct fancurve { + struct fancurve_point points[MAXFANCURVESIZE]; + // number of points used; must be <= MAXFANCURVESIZE + size_t size; + // the point at which fans are run currently + size_t current_point_i; +}; + +// validation functions + +static bool fancurve_is_valid_min_temp(int min_temp) +{ + return min_temp >= 0 && min_temp <= 127; +} + +static bool fancurve_is_valid_max_temp(int max_temp) +{ + return max_temp >= 0 && max_temp <= 127; +} + +// setters with validation +// - make hwmon implementation easier +// - keep fancurve valid, otherwise EC will not properly control fan + +static bool fancurve_set_rpm1(struct fancurve *fancurve, int point_id, int rpm) +{ + bool valid = point_id == 0 ? rpm == 0 : (rpm >= 0 && rpm <= 4500); + + if (valid) + fancurve->points[point_id].rpm1_raw = rpm / 100; + return valid; +} + +static bool fancurve_set_rpm2(struct fancurve *fancurve, int point_id, int rpm) +{ + bool valid = point_id == 0 ? rpm == 0 : (rpm >= 0 && rpm <= 4500); + + if (valid) + fancurve->points[point_id].rpm2_raw = rpm / 100; + return valid; +} + +// TODO: remove { ... } from single line if body + +static bool fancurve_set_accel(struct fancurve *fancurve, int point_id, + int accel) +{ + bool valid = accel >= 2 && accel <= 5; + + if (valid) + fancurve->points[point_id].accel = accel; + return valid; +} + +static bool fancurve_set_decel(struct fancurve *fancurve, int point_id, + int decel) +{ + bool valid = decel >= 2 && decel <= 5; + + if (valid) + fancurve->points[point_id].decel = decel; + return valid; +} + +static bool fancurve_set_cpu_temp_max(struct fancurve *fancurve, int point_id, + int value) +{ + bool valid = fancurve_is_valid_max_temp(value); + + if (valid) + fancurve->points[point_id].cpu_max_temp_celsius = value; + + return valid; +} + +static bool fancurve_set_gpu_temp_max(struct fancurve *fancurve, int point_id, + int value) +{ + bool valid = fancurve_is_valid_max_temp(value); + + if (valid) + fancurve->points[point_id].gpu_max_temp_celsius = value; + return valid; +} + +static bool fancurve_set_ic_temp_max(struct fancurve *fancurve, int point_id, + int value) +{ + bool valid = fancurve_is_valid_max_temp(value); + + if (valid) + fancurve->points[point_id].ic_max_temp_celsius = value; + return valid; +} + +static bool fancurve_set_cpu_temp_min(struct fancurve *fancurve, int point_id, + int value) +{ + bool valid = fancurve_is_valid_max_temp(value); + + if (valid) + fancurve->points[point_id].cpu_min_temp_celsius = value; + return valid; +} + +static bool fancurve_set_gpu_temp_min(struct fancurve *fancurve, int point_id, + int value) +{ + bool valid = fancurve_is_valid_min_temp(value); + + if (valid) + fancurve->points[point_id].gpu_min_temp_celsius = value; + return valid; +} + +static bool fancurve_set_ic_temp_min(struct fancurve *fancurve, int point_id, + int value) +{ + bool valid = fancurve_is_valid_min_temp(value); + + if (valid) + fancurve->points[point_id].ic_min_temp_celsius = value; + return valid; +} + +static bool fancurve_set_size(struct fancurve *fancurve, int size, + bool init_values) +{ + bool valid = size >= 1 && size <= MAXFANCURVESIZE; + + if (!valid) + return false; + if (init_values && size < fancurve->size) { + // fancurve size is decreased, but last entry always needs 127 temperatures + // Note: size >=1 + fancurve->points[size - 1].cpu_max_temp_celsius = 127; + fancurve->points[size - 1].ic_max_temp_celsius = 127; + fancurve->points[size - 1].gpu_max_temp_celsius = 127; + } + if (init_values && size > fancurve->size) { + // fancurve increased, so new entries need valid values + int i; + int last = fancurve->size > 0 ? fancurve->size - 1 : 0; + + for (i = fancurve->size; i < size; ++i) + fancurve->points[i] = fancurve->points[last]; + } + return true; +} + +static ssize_t fancurve_print_seqfile(const struct fancurve *fancurve, + struct seq_file *s) +{ + int i; + + seq_printf( + s, + "rpm1|rpm2|acceleration|deceleration|cpu_min_temp|cpu_max_temp|gpu_min_temp|gpu_max_temp|ic_min_temp|ic_max_temp\n"); + for (i = 0; i < fancurve->size; ++i) { + const struct fancurve_point *point = &fancurve->points[i]; + + seq_printf( + s, "%d\t %d\t %d\t %d\t %d\t %d\t %d\t %d\t %d\t %d\n", + point->rpm1_raw * 100, point->rpm2_raw * 100, + point->accel, point->decel, point->cpu_min_temp_celsius, + point->cpu_max_temp_celsius, + point->gpu_min_temp_celsius, + point->gpu_max_temp_celsius, point->ic_min_temp_celsius, + point->ic_max_temp_celsius); + } + return 0; +} + +struct light { + bool initialized; + struct led_classdev led; + unsigned int last_brightness; + u8 light_id; + unsigned int lower_limit; + unsigned int upper_limit; +}; + +/* ============================= */ +/* Global and shared data between */ +/* all calls to this module */ +/* ============================= */ +// Implemented like ideapad-laptop.c but currently still +// without dynamic memory allocation (instead global _priv) +struct legion_private { + struct platform_device *platform_device; + // TODO: remove or keep? init? + struct acpi_device *adev; + + // Method to access ECRAM + struct ecram ecram; + // Configuration with registers and ECRAM access method + const struct model_config *conf; + + // TODO: maybe refactor and keep only local to each function + // last known fan curve + struct fancurve fancurve; + // configured fan curve from user space + struct fancurve fancurve_configured; + + // update lock, when partial values of fancurve are changed + struct mutex fancurve_mutex; + + //interfaces + struct dentry *debugfs_dir; + struct device *hwmon_dev; + struct platform_profile_handler platform_profile_handler; + + struct light kbd_bl; + struct light ylogo_light; + struct light iport_light; + + // TODO: remove? + bool loaded; + + // TODO: remove, only for reverse enginnering + struct ecram_memoryio ec_memoryio; +}; + +// shared between different drivers: WMI, platform and protected by mutex +static struct legion_private *legion_shared; +static struct legion_private _priv; +static DEFINE_MUTEX(legion_shared_mutex); + +static int legion_shared_init(struct legion_private *priv) +{ + int ret; + + mutex_lock(&legion_shared_mutex); + + if (!legion_shared) { + legion_shared = priv; + mutex_init(&legion_shared->fancurve_mutex); + ret = 0; + } else { + pr_warn("Found multiple platform devices\n"); + ret = -EINVAL; + } + + priv->loaded = true; + mutex_unlock(&legion_shared_mutex); + + return ret; +} + +static void legion_shared_exit(struct legion_private *priv) +{ + pr_info("Unloading legion shared\n"); + mutex_lock(&legion_shared_mutex); + + if (legion_shared == priv) + legion_shared = NULL; + + mutex_unlock(&legion_shared_mutex); + pr_info("Unloading legion shared done\n"); +} + +static int get_simple_wmi_attribute(struct legion_private *priv, + const char *guid, u8 instance, + u32 method_id, bool invert, + unsigned long scale, unsigned long *value) +{ + unsigned long state = 0; + int err; + + if (scale == 0) { + pr_info("Scale cannot be 0\n"); + return -EINVAL; + } + err = wmi_exec_noarg_int(guid, instance, method_id, &state); + if (err) + return -EINVAL; + + // TODO: remove later + pr_info("%swith raw value: %ld\n", __func__, state); + + state = state * scale; + + if (invert) + state = !state; + *value = state; + return 0; +} + +static int get_simple_wmi_attribute_bool(struct legion_private *priv, + const char *guid, u8 instance, + u32 method_id, bool invert, + unsigned long scale, bool *value) +{ + unsigned long int_val = *value; + int err = get_simple_wmi_attribute(priv, guid, instance, method_id, + invert, scale, &int_val); + *value = int_val; + return err; +} + +static int set_simple_wmi_attribute(struct legion_private *priv, + const char *guid, u8 instance, + u32 method_id, bool invert, int scale, + int state) +{ + int err; + u8 in_param; + + if (scale == 0) { + pr_info("Scale cannot be 0\n"); + return -EINVAL; + } + + if (invert) + state = !state; + + in_param = state / scale; + + err = wmi_exec_arg(guid, instance, method_id, &in_param, + sizeof(in_param)); + return err; +} + +/* ============================= */ +/* Sensor value reading/writing */ +/* ============================= */ + +static int ec_read_sensor_values(struct ecram *ecram, + const struct model_config *model, + struct sensor_values *values) +{ + values->fan1_target_rpm = + 100 * ecram_read(ecram, model->registers->EXT_FAN1_TARGET_RPM); + values->fan2_target_rpm = + 100 * ecram_read(ecram, model->registers->EXT_FAN2_TARGET_RPM); + + values->fan1_rpm = + ecram_read(ecram, model->registers->EXT_FAN1_RPM_LSB) + + (((int)ecram_read(ecram, model->registers->EXT_FAN1_RPM_MSB)) + << 8); + values->fan2_rpm = + ecram_read(ecram, model->registers->EXT_FAN2_RPM_LSB) + + (((int)ecram_read(ecram, model->registers->EXT_FAN2_RPM_MSB)) + << 8); + + values->cpu_temp_celsius = + ecram_read(ecram, model->registers->EXT_CPU_TEMP_INPUT); + values->gpu_temp_celsius = + ecram_read(ecram, model->registers->EXT_GPU_TEMP_INPUT); + values->ic_temp_celsius = + ecram_read(ecram, model->registers->EXT_IC_TEMP_INPUT); + + values->cpu_temp_celsius = ecram_read(ecram, 0xC5E6); + values->gpu_temp_celsius = ecram_read(ecram, 0xC5E7); + values->ic_temp_celsius = ecram_read(ecram, 0xC5E8); + + return 0; +} + +static ssize_t ec_read_temperature(struct ecram *ecram, + const struct model_config *model, + int sensor_id, int *temperature) +{ + int err = 0; + unsigned long res; + + if (sensor_id == 0) { + res = ecram_read(ecram, 0xC5E6); + } else if (sensor_id == 1) { + res = ecram_read(ecram, 0xC5E7); + } else { + // TODO: use all correct error codes + return -EEXIST; + } + if (!err) + *temperature = res; + return err; +} + +static ssize_t ec_read_fanspeed(struct ecram *ecram, + const struct model_config *model, int fan_id, + int *fanspeed_rpm) +{ + int err = 0; + unsigned long res; + + if (fan_id == 0) { + res = ecram_read(ecram, model->registers->EXT_FAN1_RPM_LSB) + + (((int)ecram_read(ecram, + model->registers->EXT_FAN1_RPM_MSB)) + << 8); + } else if (fan_id == 1) { + res = ecram_read(ecram, model->registers->EXT_FAN2_RPM_LSB) + + (((int)ecram_read(ecram, + model->registers->EXT_FAN2_RPM_MSB)) + << 8); + } else { + // TODO: use all correct error codes + return -EEXIST; + } + if (!err) + *fanspeed_rpm = res; + return err; +} + +// '\_SB.PCI0.LPC0.EC0.FANS +#define ACPI_PATH_FAN_SPEED1 "FANS" +// '\_SB.PCI0.LPC0.EC0.FA2S +#define ACPI_PATH_FAN_SPEED2 "FA2S" + +static ssize_t acpi_read_fanspeed(struct legion_private *priv, int fan_id, + int *value) +{ + int err; + unsigned long acpi_value; + const char *acpi_path; + + if (fan_id == 0) { + acpi_path = ACPI_PATH_FAN_SPEED1; + } else if (fan_id == 1) { + acpi_path = ACPI_PATH_FAN_SPEED2; + } else { + // TODO: use all correct error codes + return -EEXIST; + } + err = eval_int(priv->adev->handle, acpi_path, &acpi_value); + if (!err) + *value = (int)acpi_value * 100; + return err; +} + +// '\_SB.PCI0.LPC0.EC0.CPUT +#define ACPI_PATH_CPU_TEMP "CPUT" +// '\_SB.PCI0.LPC0.EC0.GPUT +#define ACPI_PATH_GPU_TEMP "GPUT" + +static ssize_t acpi_read_temperature(struct legion_private *priv, int fan_id, + int *value) +{ + int err; + unsigned long acpi_value; + const char *acpi_path; + + if (fan_id == 0) { + acpi_path = ACPI_PATH_CPU_TEMP; + } else if (fan_id == 1) { + acpi_path = ACPI_PATH_GPU_TEMP; + } else { + // TODO: use all correct error codes + return -EEXIST; + } + err = eval_int(priv->adev->handle, acpi_path, &acpi_value); + if (!err) + *value = (int)acpi_value; + return err; +} + +// fan_id: 0 or 1 +static ssize_t wmi_read_fanspeed(int fan_id, int *fanspeed_rpm) +{ + int err; + unsigned long res; + struct acpi_buffer params; + + params.length = 1; + params.pointer = &fan_id; + + err = wmi_exec_int(WMI_GUID_LENOVO_FAN_METHOD, 0, + WMI_METHOD_ID_FAN_GETCURRENTFANSPEED, ¶ms, &res); + + if (!err) + *fanspeed_rpm = res; + return err; +} + +//sensor_id: cpu = 0, gpu = 1 +static ssize_t wmi_read_temperature(int sensor_id, int *temperature) +{ + int err; + unsigned long res; + struct acpi_buffer params; + + if (sensor_id == 0) + sensor_id = 0x03; + else if (sensor_id == 1) + sensor_id = 0x04; + else { + // TODO: use all correct error codes + return -EEXIST; + } + + params.length = 1; + params.pointer = &sensor_id; + + err = wmi_exec_int(WMI_GUID_LENOVO_FAN_METHOD, 0, + WMI_METHOD_ID_FAN_GETCURRENTSENSORTEMPERATURE, + ¶ms, &res); + + if (!err) + *temperature = res; + return err; +} + +// fan_id: 0 or 1 +static ssize_t wmi_read_fanspeed_gz(int fan_id, int *fanspeed_rpm) +{ + int err; + u32 method_id; + unsigned long res; + + if (fan_id == 0) + method_id = WMI_METHOD_ID_GETFAN1SPEED; + else if (fan_id == 1) + method_id = WMI_METHOD_ID_GETFAN2SPEED; + else { + // TODO: use all correct error codes + return -EEXIST; + } + err = wmi_exec_noarg_int(LEGION_WMI_GAMEZONE_GUID, 0, method_id, &res); + + if (!err) + *fanspeed_rpm = res; + return err; +} + +//sensor_id: cpu = 0, gpu = 1 +static ssize_t wmi_read_temperature_gz(int sensor_id, int *temperature) +{ + int err; + u32 method_id; + unsigned long res; + + if (sensor_id == 0) + method_id = WMI_METHOD_ID_GETCPUTEMP; + else if (sensor_id == 1) + method_id = WMI_METHOD_ID_GETGPUTEMP; + else { + // TODO: use all correct error codes + return -EEXIST; + } + + err = wmi_exec_noarg_int(LEGION_WMI_GAMEZONE_GUID, 0, method_id, &res); + + if (!err) + *temperature = res; + return err; +} + +// fan_id: 0 or 1 +static ssize_t wmi_read_fanspeed_other(int fan_id, int *fanspeed_rpm) +{ + int err; + enum OtherMethodFeature featured_id; + int res; + + if (fan_id == 0) + featured_id = OtherMethodFeature_FAN_SPEED_1; + else if (fan_id == 1) + featured_id = OtherMethodFeature_FAN_SPEED_2; + else { + // TODO: use all correct error codes + return -EEXIST; + } + + err = wmi_other_method_get_value(featured_id, &res); + + if (!err) + *fanspeed_rpm = res; + return err; +} + +//sensor_id: cpu = 0, gpu = 1 +static ssize_t wmi_read_temperature_other(int sensor_id, int *temperature) +{ + int err; + enum OtherMethodFeature featured_id; + int res; + + if (sensor_id == 0) + featured_id = OtherMethodFeature_TEMP_CPU; + else if (sensor_id == 1) + featured_id = OtherMethodFeature_TEMP_GPU; + else { + // TODO: use all correct error codes + return -EEXIST; + } + + err = wmi_other_method_get_value(featured_id, &res); + if (!err) + *temperature = res; + return err; +} + +static ssize_t read_fanspeed(struct legion_private *priv, int fan_id, + int *speed_rpm) +{ + // TODO: use enums or function pointers? + switch (priv->conf->access_method_fanspeed) { + case ACCESS_METHOD_EC: + return ec_read_fanspeed(&priv->ecram, priv->conf, fan_id, + speed_rpm); + case ACCESS_METHOD_ACPI: + return acpi_read_fanspeed(priv, fan_id, speed_rpm); + case ACCESS_METHOD_WMI: + return wmi_read_fanspeed_gz(fan_id, speed_rpm); + case ACCESS_METHOD_WMI2: + return wmi_read_fanspeed(fan_id, speed_rpm); + case ACCESS_METHOD_WMI3: + return wmi_read_fanspeed_other(fan_id, speed_rpm); + default: + pr_info("No access method for fanspeed: %d\n", + priv->conf->access_method_fanspeed); + return -EINVAL; + } +} + +static ssize_t read_temperature(struct legion_private *priv, int sensor_id, + int *temperature) +{ + // TODO: use enums or function pointers? + switch (priv->conf->access_method_temperature) { + case ACCESS_METHOD_EC: + return ec_read_temperature(&priv->ecram, priv->conf, sensor_id, + temperature); + case ACCESS_METHOD_ACPI: + return acpi_read_temperature(priv, sensor_id, temperature); + case ACCESS_METHOD_WMI: + return wmi_read_temperature_gz(sensor_id, temperature); + case ACCESS_METHOD_WMI2: + return wmi_read_temperature(sensor_id, temperature); + case ACCESS_METHOD_WMI3: + return wmi_read_temperature_other(sensor_id, temperature); + default: + pr_info("No access method for temperature: %d\n", + priv->conf->access_method_temperature); + return -EINVAL; + } +} + +/* ============================= */ +/* Fancurve reading/writing */ +/* ============================= */ + +/* Fancurve from WMI + * This allows changing fewer parameters. + * It is only available on newer models. + */ + +struct WMIFanTable { + u8 FSTM; //FSMD + u8 FSID; + u32 FSTL; //FSST + u16 FSS0; + u16 FSS1; + u16 FSS2; + u16 FSS3; + u16 FSS4; + u16 FSS5; + u16 FSS6; + u16 FSS7; + u16 FSS8; + u16 FSS9; +} __packed; + +struct WMIFanTableRead { + u32 FSFL; + u32 FSS0; + u32 FSS1; + u32 FSS2; + u32 FSS3; + u32 FSS4; + u32 FSS5; + u32 FSS6; + u32 FSS7; + u32 FSS8; + u32 FSS9; + u32 FSSA; +} __packed; + +static ssize_t wmi_read_fancurve_custom(const struct model_config *model, + struct fancurve *fancurve) +{ + u8 buffer[88]; + int err; + + // The output buffer from the ACPI call is 88 bytes and larger + // than the returned object + pr_info("Size of object: %lu\n", sizeof(struct WMIFanTableRead)); + err = wmi_exec_noarg_ints(WMI_GUID_LENOVO_FAN_METHOD, 0, + WMI_METHOD_ID_FAN_GET_TABLE, buffer, + sizeof(buffer)); + print_hex_dump(KERN_INFO, "legion_laptop fan table wmi buffer", + DUMP_PREFIX_ADDRESS, 16, 1, buffer, sizeof(buffer), + true); + if (!err) { + struct WMIFanTableRead *fantable = + (struct WMIFanTableRead *)&buffer[0]; + fancurve->current_point_i = 0; + fancurve->size = 10; + fancurve->points[0].rpm1_raw = fantable->FSS0; + fancurve->points[1].rpm1_raw = fantable->FSS1; + fancurve->points[2].rpm1_raw = fantable->FSS2; + fancurve->points[3].rpm1_raw = fantable->FSS3; + fancurve->points[4].rpm1_raw = fantable->FSS4; + fancurve->points[5].rpm1_raw = fantable->FSS5; + fancurve->points[6].rpm1_raw = fantable->FSS6; + fancurve->points[7].rpm1_raw = fantable->FSS7; + fancurve->points[8].rpm1_raw = fantable->FSS8; + fancurve->points[9].rpm1_raw = fantable->FSS9; + //fancurve->points[10].rpm1_raw = fantable->FSSA; + } + return err; +} + +static ssize_t wmi_write_fancurve_custom(const struct model_config *model, + const struct fancurve *fancurve) +{ + u8 buffer[0x20]; + int err; + + // The buffer is read like this in ACPI firmware + // + // CreateByteField (Arg2, Zero, FSTM) + // CreateByteField (Arg2, One, FSID) + // CreateDWordField (Arg2, 0x02, FSTL) + // CreateByteField (Arg2, 0x06, FSS0) + // CreateByteField (Arg2, 0x08, FSS1) + // CreateByteField (Arg2, 0x0A, FSS2) + // CreateByteField (Arg2, 0x0C, FSS3) + // CreateByteField (Arg2, 0x0E, FSS4) + // CreateByteField (Arg2, 0x10, FSS5) + // CreateByteField (Arg2, 0x12, FSS6) + // CreateByteField (Arg2, 0x14, FSS7) + // CreateByteField (Arg2, 0x16, FSS8) + // CreateByteField (Arg2, 0x18, FSS9) + + memset(buffer, 0, sizeof(buffer)); + buffer[0x06] = fancurve->points[0].rpm1_raw; + buffer[0x08] = fancurve->points[1].rpm1_raw; + buffer[0x0A] = fancurve->points[2].rpm1_raw; + buffer[0x0C] = fancurve->points[3].rpm1_raw; + buffer[0x0E] = fancurve->points[4].rpm1_raw; + buffer[0x10] = fancurve->points[5].rpm1_raw; + buffer[0x12] = fancurve->points[6].rpm1_raw; + buffer[0x14] = fancurve->points[7].rpm1_raw; + buffer[0x16] = fancurve->points[8].rpm1_raw; + buffer[0x18] = fancurve->points[9].rpm1_raw; + + print_hex_dump(KERN_INFO, "legion_laptop fan table wmi write buffer", + DUMP_PREFIX_ADDRESS, 16, 1, buffer, sizeof(buffer), + true); + err = wmi_exec_arg(WMI_GUID_LENOVO_FAN_METHOD, 0, + WMI_METHOD_ID_FAN_SET_TABLE, buffer, sizeof(buffer)); + return err; +} + +/* Read the fan curve from the EC. + * + * In newer models (>=2022) there is an ACPI/WMI to read fan curve as + * a whole. So read/write fan table as a whole to use the + * same interface for both cases. + * + * It reads all points from EC memory, even if stored fancurve is smaller, so + * it can contain 0 entries. + */ +static int ec_read_fancurve_legion(struct ecram *ecram, + const struct model_config *model, + struct fancurve *fancurve) +{ + size_t i = 0; + + for (i = 0; i < MAXFANCURVESIZE; ++i) { + struct fancurve_point *point = &fancurve->points[i]; + + point->rpm1_raw = + ecram_read(ecram, model->registers->EXT_FAN1_BASE + i); + point->rpm2_raw = + ecram_read(ecram, model->registers->EXT_FAN2_BASE + i); + + point->accel = ecram_read( + ecram, model->registers->EXT_FAN_ACC_BASE + i); + point->decel = ecram_read( + ecram, model->registers->EXT_FAN_DEC_BASE + i); + point->cpu_max_temp_celsius = + ecram_read(ecram, model->registers->EXT_CPU_TEMP + i); + point->cpu_min_temp_celsius = ecram_read( + ecram, model->registers->EXT_CPU_TEMP_HYST + i); + point->gpu_max_temp_celsius = + ecram_read(ecram, model->registers->EXT_GPU_TEMP + i); + point->gpu_min_temp_celsius = ecram_read( + ecram, model->registers->EXT_GPU_TEMP_HYST + i); + point->ic_max_temp_celsius = + ecram_read(ecram, model->registers->EXT_VRM_TEMP + i); + point->ic_min_temp_celsius = ecram_read( + ecram, model->registers->EXT_VRM_TEMP_HYST + i); + } + + // Do not trust that hardware; It might suddenly report + // a larger size, so clamp it. + fancurve->size = + ecram_read(ecram, model->registers->EXT_FAN_POINTS_SIZE); + fancurve->size = + min(fancurve->size, (typeof(fancurve->size))(MAXFANCURVESIZE)); + fancurve->current_point_i = + ecram_read(ecram, model->registers->EXT_FAN_CUR_POINT); + fancurve->current_point_i = + min(fancurve->current_point_i, fancurve->size); + return 0; +} + +static int ec_write_fancurve_legion(struct ecram *ecram, + const struct model_config *model, + const struct fancurve *fancurve, + bool write_size) +{ + size_t i; + + // Reset fan update counters (try to avoid any race conditions) + ecram_write(ecram, 0xC5FE, 0); + ecram_write(ecram, 0xC5FF, 0); + for (i = 0; i < MAXFANCURVESIZE; ++i) { + // Entries for points larger than fancurve size should be cleared + // to 0 + const struct fancurve_point *point = + i < fancurve->size ? &fancurve->points[i] : + &fancurve_point_zero; + + ecram_write(ecram, model->registers->EXT_FAN1_BASE + i, + point->rpm1_raw); + ecram_write(ecram, model->registers->EXT_FAN2_BASE + i, + point->rpm2_raw); + + ecram_write(ecram, model->registers->EXT_FAN_ACC_BASE + i, + point->accel); + ecram_write(ecram, model->registers->EXT_FAN_DEC_BASE + i, + point->decel); + + ecram_write(ecram, model->registers->EXT_CPU_TEMP + i, + point->cpu_max_temp_celsius); + ecram_write(ecram, model->registers->EXT_CPU_TEMP_HYST + i, + point->cpu_min_temp_celsius); + ecram_write(ecram, model->registers->EXT_GPU_TEMP + i, + point->gpu_max_temp_celsius); + ecram_write(ecram, model->registers->EXT_GPU_TEMP_HYST + i, + point->gpu_min_temp_celsius); + ecram_write(ecram, model->registers->EXT_VRM_TEMP + i, + point->ic_max_temp_celsius); + ecram_write(ecram, model->registers->EXT_VRM_TEMP_HYST + i, + point->ic_min_temp_celsius); + } + + if (write_size) { + ecram_write(ecram, model->registers->EXT_FAN_POINTS_SIZE, + fancurve->size); + } + + // Reset current fan level to 0, so algorithm in EC + // selects fan curve point again and resetting hysterisis + // effects + ecram_write(ecram, model->registers->EXT_FAN_CUR_POINT, 0); + + // Reset internal fan levels + ecram_write(ecram, 0xC634, 0); // CPU + ecram_write(ecram, 0xC635, 0); // GPU + ecram_write(ecram, 0xC636, 0); // SENSOR + + return 0; +} + +#define FANCURVESIZE_IDEAPDAD 8 + +static int ec_read_fancurve_ideapad(struct ecram *ecram, + const struct model_config *model, + struct fancurve *fancurve) +{ + size_t i = 0; + + for (i = 0; i < FANCURVESIZE_IDEAPDAD; ++i) { + struct fancurve_point *point = &fancurve->points[i]; + + point->rpm1_raw = + ecram_read(ecram, model->registers->EXT_FAN1_BASE + i); + point->rpm2_raw = + ecram_read(ecram, model->registers->EXT_FAN2_BASE + i); + + point->accel = 0; + point->decel = 0; + point->cpu_max_temp_celsius = + ecram_read(ecram, model->registers->EXT_CPU_TEMP + i); + point->cpu_min_temp_celsius = ecram_read( + ecram, model->registers->EXT_CPU_TEMP_HYST + i); + point->gpu_max_temp_celsius = + ecram_read(ecram, model->registers->EXT_GPU_TEMP + i); + point->gpu_min_temp_celsius = ecram_read( + ecram, model->registers->EXT_GPU_TEMP_HYST + i); + point->ic_max_temp_celsius = 0; + point->ic_min_temp_celsius = 0; + } + + // Do not trust that hardware; It might suddenly report + // a larger size, so clamp it. + fancurve->size = FANCURVESIZE_IDEAPDAD; + fancurve->current_point_i = + ecram_read(ecram, model->registers->EXT_FAN_CUR_POINT); + fancurve->current_point_i = + min(fancurve->current_point_i, fancurve->size); + return 0; +} + +static int ec_write_fancurve_ideapad(struct ecram *ecram, + const struct model_config *model, + const struct fancurve *fancurve) +{ + size_t i; + int valr1; + int valr2; + + // add this later: maybe other addresses needed + // therefore, fan curve might not be effective immediately but + // only after temp change + // Reset fan update counters (try to avoid any race conditions) + ecram_write(ecram, 0xC5FE, 0); + ecram_write(ecram, 0xC5FF, 0); + for (i = 0; i < FANCURVESIZE_IDEAPDAD; ++i) { + const struct fancurve_point *point = &fancurve->points[i]; + + ecram_write(ecram, model->registers->EXT_FAN1_BASE + i, + point->rpm1_raw); + valr1 = ecram_read(ecram, model->registers->EXT_FAN1_BASE + i); + ecram_write(ecram, model->registers->EXT_FAN2_BASE + i, + point->rpm2_raw); + valr2 = ecram_read(ecram, model->registers->EXT_FAN2_BASE + i); + pr_info("Writing fan1: %d; reading fan1: %d\n", point->rpm1_raw, + valr1); + pr_info("Writing fan2: %d; reading fan2: %d\n", point->rpm2_raw, + valr2); + + // write to memory and repeat 8 bytes later again + ecram_write(ecram, model->registers->EXT_CPU_TEMP + i, + point->cpu_max_temp_celsius); + ecram_write(ecram, model->registers->EXT_CPU_TEMP + 8 + i, + point->cpu_max_temp_celsius); + // write to memory and repeat 8 bytes later again + ecram_write(ecram, model->registers->EXT_CPU_TEMP_HYST + i, + point->cpu_min_temp_celsius); + ecram_write(ecram, model->registers->EXT_CPU_TEMP_HYST + 8 + i, + point->cpu_min_temp_celsius); + // write to memory and repeat 8 bytes later again + ecram_write(ecram, model->registers->EXT_GPU_TEMP + i, + point->gpu_max_temp_celsius); + ecram_write(ecram, model->registers->EXT_GPU_TEMP + 8 + i, + point->gpu_max_temp_celsius); + // write to memory and repeat 8 bytes later again + ecram_write(ecram, model->registers->EXT_GPU_TEMP_HYST + i, + point->gpu_min_temp_celsius); + ecram_write(ecram, model->registers->EXT_GPU_TEMP_HYST + 8 + i, + point->gpu_min_temp_celsius); + } + + // add this later: maybe other addresses needed + // therefore, fan curve might not be effective immediately but + // only after temp change + // // Reset current fan level to 0, so algorithm in EC + // // selects fan curve point again and resetting hysterisis + // // effects + // ecram_write(ecram, model->registers->EXT_FAN_CUR_POINT, 0); + + // // Reset internal fan levels + // ecram_write(ecram, 0xC634, 0); // CPU + // ecram_write(ecram, 0xC635, 0); // GPU + // ecram_write(ecram, 0xC636, 0); // SENSOR + + return 0; +} + +#define FANCURVESIZE_LOQ 10 + +static int ec_read_fancurve_loq(struct ecram *ecram, + const struct model_config *model, + struct fancurve *fancurve) +{ + size_t i = 0; + size_t struct_offset = 3; // {cpu_temp: u8, rpm: u8, gpu_temp?: u8} + + for (i = 0; i < FANCURVESIZE_LOQ; ++i) { + struct fancurve_point *point = &fancurve->points[i]; + + point->rpm1_raw = + ecram_read(ecram, model->registers->EXT_FAN1_BASE + (i * struct_offset)); + point->rpm2_raw = + ecram_read(ecram, model->registers->EXT_FAN2_BASE + (i * struct_offset)); + + point->accel = 0; + point->decel = 0; + point->cpu_max_temp_celsius = + ecram_read(ecram, model->registers->EXT_CPU_TEMP + (i * struct_offset)); + point->gpu_max_temp_celsius = + ecram_read(ecram, model->registers->EXT_GPU_TEMP + (i * struct_offset)); + point->cpu_min_temp_celsius = 0; + point->gpu_min_temp_celsius = 0; + point->ic_max_temp_celsius = 0; + point->ic_min_temp_celsius = 0; + } + + fancurve->size = FANCURVESIZE_LOQ; + fancurve->current_point_i = + ecram_read(ecram, model->registers->EXT_FAN_CUR_POINT); + fancurve->current_point_i = + min(fancurve->current_point_i, fancurve->size); + return 0; +} + +static int ec_write_fancurve_loq(struct ecram *ecram, + const struct model_config *model, + const struct fancurve *fancurve) +{ + size_t i; + int valr1; + int valr2; + size_t struct_offset = 3; // {cpu_temp: u8, rpm: u8, gpu_temp?: u8} + + for (i = 0; i < FANCURVESIZE_LOQ; ++i) { + const struct fancurve_point *point = &fancurve->points[i]; + + ecram_write(ecram, model->registers->EXT_FAN1_BASE + (i * struct_offset), + point->rpm1_raw); + valr1 = ecram_read(ecram, model->registers->EXT_FAN1_BASE + (i * struct_offset)); + ecram_write(ecram, model->registers->EXT_FAN2_BASE + (i * struct_offset), + point->rpm2_raw); + valr2 = ecram_read(ecram, model->registers->EXT_FAN2_BASE + (i * struct_offset)); + pr_info("Writing fan1: %d; reading fan1: %d\n", point->rpm1_raw, + valr1); + pr_info("Writing fan2: %d; reading fan2: %d\n", point->rpm2_raw, + valr2); + + // write to memory and repeat 8 bytes later again + ecram_write(ecram, model->registers->EXT_CPU_TEMP + (i * struct_offset), + point->cpu_max_temp_celsius); + // write to memory and repeat 8 bytes later again + ecram_write(ecram, model->registers->EXT_GPU_TEMP + (i * struct_offset), + point->gpu_max_temp_celsius); + } + + return 0; +} + +static int read_fancurve(struct legion_private *priv, struct fancurve *fancurve) +{ + // TODO: use enums or function pointers? + switch (priv->conf->access_method_fancurve) { + case ACCESS_METHOD_EC: + return ec_read_fancurve_legion(&priv->ecram, priv->conf, + fancurve); + case ACCESS_METHOD_EC2: + return ec_read_fancurve_ideapad(&priv->ecram, priv->conf, + fancurve); + case ACCESS_METHOD_EC3: + return ec_read_fancurve_loq(&priv->ecram, priv->conf, + fancurve); + case ACCESS_METHOD_WMI3: + return wmi_read_fancurve_custom(priv->conf, fancurve); + default: + pr_info("No access method for fancurve: %d\n", + priv->conf->access_method_fancurve); + return -EINVAL; + } +} + +static int write_fancurve(struct legion_private *priv, + const struct fancurve *fancurve, bool write_size) +{ + // TODO: use enums or function pointers? + switch (priv->conf->access_method_fancurve) { + case ACCESS_METHOD_EC: + return ec_write_fancurve_legion(&priv->ecram, priv->conf, + fancurve, write_size); + case ACCESS_METHOD_EC2: + return ec_write_fancurve_ideapad(&priv->ecram, priv->conf, + fancurve); + case ACCESS_METHOD_EC3: + return ec_write_fancurve_loq(&priv->ecram, priv->conf, + fancurve); + case ACCESS_METHOD_WMI3: + return wmi_write_fancurve_custom(priv->conf, fancurve); + default: + pr_info("No access method for fancurve: %d\n", + priv->conf->access_method_fancurve); + return -EINVAL; + } +} + +#define MINIFANCUVE_ON_COOL_ON 0x04 +#define MINIFANCUVE_ON_COOL_OFF 0xA0 + +static int ec_read_minifancurve(struct ecram *ecram, + const struct model_config *model, bool *state) +{ + int value = + ecram_read(ecram, model->registers->EXT_MINIFANCURVE_ON_COOL); + + switch (value) { + case MINIFANCUVE_ON_COOL_ON: + *state = true; + break; + case MINIFANCUVE_ON_COOL_OFF: + *state = false; + break; + default: + pr_info("Unexpected value in MINIFANCURVE register: %d\n", + value); + return -1; + } + return 0; +} + +static ssize_t ec_write_minifancurve(struct ecram *ecram, + const struct model_config *model, + bool state) +{ + u8 val = state ? MINIFANCUVE_ON_COOL_ON : MINIFANCUVE_ON_COOL_OFF; + + ecram_write(ecram, model->registers->EXT_MINIFANCURVE_ON_COOL, val); + return 0; +} + +#define EC_LOCKFANCONTROLLER_ON 8 +#define EC_LOCKFANCONTROLLER_OFF 0 + +static ssize_t ec_write_lockfancontroller(struct ecram *ecram, + const struct model_config *model, + bool state) +{ + u8 val = state ? EC_LOCKFANCONTROLLER_ON : EC_LOCKFANCONTROLLER_OFF; + + ecram_write(ecram, model->registers->EXT_LOCKFANCONTROLLER, val); + return 0; +} + +static int ec_read_lockfancontroller(struct ecram *ecram, + const struct model_config *model, + bool *state) +{ + int value = ecram_read(ecram, model->registers->EXT_LOCKFANCONTROLLER); + + switch (value) { + case EC_LOCKFANCONTROLLER_ON: + *state = true; + break; + case EC_LOCKFANCONTROLLER_OFF: + *state = false; + break; + default: + pr_info("Unexpected value in lockfanspeed register: %d\n", + value); + return -1; + } + return 0; +} + +#define EC_FANFULLSPEED_ON 0x40 +#define EC_FANFULLSPEED_OFF 0x00 + +static int ec_read_fanfullspeed(struct ecram *ecram, + const struct model_config *model, bool *state) +{ + int value = ecram_read(ecram, model->registers->EXT_MAXIMUMFANSPEED); + + switch (value) { + case EC_FANFULLSPEED_ON: + *state = true; + break; + case EC_FANFULLSPEED_OFF: + *state = false; + break; + default: + pr_info("Unexpected value in maximumfanspeed register: %d\n", + value); + return -1; + } + return 0; +} + +static ssize_t ec_write_fanfullspeed(struct ecram *ecram, + const struct model_config *model, + bool state) +{ + u8 val = state ? EC_FANFULLSPEED_ON : EC_FANFULLSPEED_OFF; + + ecram_write(ecram, model->registers->EXT_MAXIMUMFANSPEED, val); + return 0; +} + +static ssize_t wmi_read_fanfullspeed(struct legion_private *priv, bool *state) +{ + return get_simple_wmi_attribute_bool(priv, WMI_GUID_LENOVO_FAN_METHOD, + 0, WMI_METHOD_ID_FAN_GET_FULLSPEED, + false, 1, state); +} + +static ssize_t wmi_write_fanfullspeed(struct legion_private *priv, bool state) +{ + return set_simple_wmi_attribute(priv, WMI_GUID_LENOVO_FAN_METHOD, 0, + WMI_METHOD_ID_FAN_SET_FULLSPEED, false, + 1, state); +} + +static ssize_t read_fanfullspeed(struct legion_private *priv, bool *state) +{ + // TODO: use enums or function pointers? + switch (priv->conf->access_method_fanfullspeed) { + case ACCESS_METHOD_EC: + return ec_read_fanfullspeed(&priv->ecram, priv->conf, state); + case ACCESS_METHOD_WMI: + return wmi_read_fanfullspeed(priv, state); + default: + pr_info("No access method for fan full speed: %d\n", + priv->conf->access_method_fanfullspeed); + return -EINVAL; + } +} + +static ssize_t write_fanfullspeed(struct legion_private *priv, bool state) +{ + ssize_t res; + + switch (priv->conf->access_method_fanfullspeed) { + case ACCESS_METHOD_EC: + res = ec_write_fanfullspeed(&priv->ecram, priv->conf, state); + return res; + case ACCESS_METHOD_WMI: + return wmi_write_fanfullspeed(priv, state); + default: + pr_info("No access method for fan full speed: %d\n", + priv->conf->access_method_fanfullspeed); + return -EINVAL; + } +} + +/* ============================= */ +/* Power mode reading/writing */ +/* ============================= */ + +enum legion_ec_powermode { + LEGION_EC_POWERMODE_QUIET = 2, + LEGION_EC_POWERMODE_BALANCED = 0, + LEGION_EC_POWERMODE_PERFORMANCE = 1, + LEGION_EC_POWERMODE_CUSTOM = 3 +}; + +enum legion_wmi_powermode { + LEGION_WMI_POWERMODE_QUIET = 1, + LEGION_WMI_POWERMODE_BALANCED = 2, + LEGION_WMI_POWERMODE_PERFORMANCE = 3, + LEGION_WMI_POWERMODE_CUSTOM = 255 +}; + +enum legion_wmi_powermode ec_to_wmi_powermode(int ec_mode) +{ + switch (ec_mode) { + case LEGION_EC_POWERMODE_QUIET: + return LEGION_WMI_POWERMODE_QUIET; + case LEGION_EC_POWERMODE_BALANCED: + return LEGION_WMI_POWERMODE_BALANCED; + case LEGION_EC_POWERMODE_PERFORMANCE: + return LEGION_WMI_POWERMODE_PERFORMANCE; + case LEGION_EC_POWERMODE_CUSTOM: + return LEGION_WMI_POWERMODE_CUSTOM; + default: + return LEGION_WMI_POWERMODE_BALANCED; + } +} + +enum legion_ec_powermode wmi_to_ec_powermode(enum legion_wmi_powermode wmi_mode) +{ + switch (wmi_mode) { + case LEGION_WMI_POWERMODE_QUIET: + return LEGION_EC_POWERMODE_QUIET; + case LEGION_WMI_POWERMODE_BALANCED: + return LEGION_EC_POWERMODE_BALANCED; + case LEGION_WMI_POWERMODE_PERFORMANCE: + return LEGION_EC_POWERMODE_PERFORMANCE; + case LEGION_WMI_POWERMODE_CUSTOM: + return LEGION_EC_POWERMODE_CUSTOM; + default: + return LEGION_EC_POWERMODE_BALANCED; + } +} + +static ssize_t ec_read_powermode(struct legion_private *priv, int *powermode) +{ + *powermode = + ecram_read(&priv->ecram, priv->conf->registers->EXT_POWERMODE); + return 0; +} + +static ssize_t ec_write_powermode(struct legion_private *priv, u8 value) +{ + if (!((value >= 0 && value <= 2) || value == 255)) { + pr_info("Unexpected power mode value ignored: %d\n", value); + return -ENOMEM; + } + ecram_write(&priv->ecram, priv->conf->registers->EXT_POWERMODE, value); + return 0; +} + +static ssize_t acpi_read_powermode(struct legion_private *priv, int *powermode) +{ + unsigned long acpi_powermode; + int err; + + // spmo method not always available + // \_SB.PCI0.LPC0.EC0.SPMO + err = eval_spmo(priv->adev->handle, &acpi_powermode); + *powermode = (int)acpi_powermode; + return err; +} + +static ssize_t wmi_read_powermode(int *powermode) +{ + int err; + unsigned long res; + + err = wmi_exec_noarg_int(LEGION_WMI_GAMEZONE_GUID, 0, + WMI_METHOD_ID_GETSMARTFANMODE, &res); + + if (!err) + *powermode = res; + return err; +} + +static ssize_t wmi_write_powermode(u8 value) +{ + if (!((value >= LEGION_WMI_POWERMODE_QUIET && + value <= LEGION_WMI_POWERMODE_PERFORMANCE) || + value == LEGION_WMI_POWERMODE_CUSTOM)) { + pr_info("Unexpected power mode value ignored: %d\n", value); + return -ENOMEM; + } + return wmi_exec_arg(LEGION_WMI_GAMEZONE_GUID, 0, + WMI_METHOD_ID_SETSMARTFANMODE, &value, + sizeof(value)); +} + +static ssize_t read_powermode(struct legion_private *priv, int *powermode) +{ + ssize_t res; + + switch (priv->conf->access_method_powermode) { + case ACCESS_METHOD_EC: + res = ec_read_powermode(priv, powermode); + *powermode = ec_to_wmi_powermode(*powermode); + return res; + case ACCESS_METHOD_ACPI: + return acpi_read_powermode(priv, powermode); + case ACCESS_METHOD_WMI: + return wmi_read_powermode(powermode); + default: + pr_info("No access method for powermode: %d\n", + priv->conf->access_method_powermode); + return -EINVAL; + } +} + +static ssize_t write_powermode(struct legion_private *priv, + enum legion_wmi_powermode value) +{ + ssize_t res; + + //TODO: remove again + pr_info("Set powermode\n"); + + switch (priv->conf->access_method_powermode) { + case ACCESS_METHOD_EC: + res = ec_write_powermode(priv, wmi_to_ec_powermode(value)); + return res; + case ACCESS_METHOD_WMI: + return wmi_write_powermode(value); + default: + pr_info("No access method for powermode: %d\n", + priv->conf->access_method_powermode); + return -EINVAL; + } +} + +/** + * Shortly toggle powermode to a different mode + * and switch back, e.g. to reset fan curve. + */ +static void toggle_powermode(struct legion_private *priv) +{ + int old_powermode; + int next_powermode; + + read_powermode(priv, &old_powermode); + next_powermode = old_powermode == 0 ? 1 : 0; + + write_powermode(priv, next_powermode); + mdelay(1500); + write_powermode(priv, old_powermode); +} + +/* ============================= */ +/* Charging mode reading/writing */ +/* ============================- */ + +#define FCT_RAPID_CHARGE_ON 0x07 +#define FCT_RAPID_CHARGE_OFF 0x08 +#define RAPID_CHARGE_ON 0x0 +#define RAPID_CHARGE_OFF 0x1 + +static int acpi_read_rapidcharge(struct acpi_device *adev, bool *state) +{ + unsigned long result; + int err; + + //also works? which one is better? + /* + * err = eval_qcho(adev->handle, &result); + * if (err) + * return err; + * state = result; + * return 0; + */ + + err = eval_gbmd(adev->handle, &result); + if (err) + return err; + + *state = result & 0x04; + return 0; +} + +static int acpi_write_rapidcharge(struct acpi_device *adev, bool state) +{ + int err; + unsigned long fct_nr = state > 0 ? FCT_RAPID_CHARGE_ON : + FCT_RAPID_CHARGE_OFF; + + err = exec_sbmc(adev->handle, fct_nr); + pr_info("Set rapidcharge to %d by calling %lu: result: %d\n", state, + fct_nr, err); + return err; +} + +/* ============================= */ +/* Keyboard backlight read/write */ +/* ============================= */ + +static ssize_t legion_kbd_bl2_brightness_get(struct legion_private *priv) +{ + unsigned long state = 0; + int err; + + err = wmi_exec_noarg_int(LEGION_WMI_GAMEZONE_GUID, 0, + WMI_METHOD_ID_GETKEYBOARDLIGHT, &state); + if (err) + return -EINVAL; + + return state; +} + +//static int legion_kbd_bl2_brightness_set(struct legion_private *priv, +// unsigned int brightness) +//{ +// u8 in_param = brightness; + +// return wmi_exec_arg(LEGION_WMI_GAMEZONE_GUID, 0, +// WMI_METHOD_ID_SETKEYBOARDLIGHT, &in_param, +// sizeof(in_param)); +//} + +//min: 1, max: 3 +#define LIGHT_ID_KEYBOARD 0x00 +//min: 0, max: 1 +#define LIGHT_ID_YLOGO 0x03 +//min: 1, max: 2 +#define LIGHT_ID_IOPORT 0x05 + +static int legion_wmi_light_get(struct legion_private *priv, u8 light_id, + unsigned int min_value, unsigned int max_value) +{ + struct acpi_buffer params; + u8 in; + u8 result[2]; + u8 value; + int err; + + params.length = 1; + params.pointer = ∈ + in = light_id; + err = wmi_exec_ints(LEGION_WMI_KBBACKLIGHT_GUID, 0, + WMI_METHOD_ID_KBBACKLIGHTGET, ¶ms, result, + ARRAY_SIZE(result)); + if (err) { + pr_info("Error for WMI method call to get brightness\n"); + return -EIO; + } + + value = result[1]; + if (!(value >= min_value && value <= max_value)) { + pr_info("Error WMI call for reading brightness: expected a value between %u and %u, but got %d\n", + min_value, max_value, value); + return -EFAULT; + } + + return value - min_value; +} + +static int legion_wmi_light_set(struct legion_private *priv, u8 light_id, + unsigned int min_value, unsigned int max_value, + unsigned int brightness) +{ + struct acpi_buffer buffer; + u8 in_buffer_param[8]; + unsigned long result; + int err; + + buffer.length = 3; + buffer.pointer = &in_buffer_param[0]; + in_buffer_param[0] = light_id; + in_buffer_param[1] = 0x01; + in_buffer_param[2] = + clamp(brightness + min_value, min_value, max_value); + + err = wmi_exec_int(LEGION_WMI_KBBACKLIGHT_GUID, 0, + WMI_METHOD_ID_KBBACKLIGHTSET, &buffer, &result); + if (err) { + pr_info("Error for WMI method call to set brightness on light: %d\n", + light_id); + return -EIO; + } + + return 0; +} + +static int legion_kbd_bl_brightness_get(struct legion_private *priv) +{ + return legion_wmi_light_get(priv, LIGHT_ID_KEYBOARD, 1, 3); +} + +static int legion_kbd_bl_brightness_set(struct legion_private *priv, + unsigned int brightness) +{ + return legion_wmi_light_set(priv, LIGHT_ID_KEYBOARD, 1, 3, brightness); +} + +/* ============================= */ +/* debugfs interface */ +/* ============================ */ + +static int debugfs_ecmemory_show(struct seq_file *s, void *unused) +{ + struct legion_private *priv = s->private; + size_t offset; + + for (offset = 0; offset < priv->conf->memoryio_size; ++offset) { + char value = ecram_read(&priv->ecram, + priv->conf->memoryio_physical_ec_start + + offset); + + seq_write(s, &value, 1); + } + return 0; +} + +DEFINE_SHOW_ATTRIBUTE(debugfs_ecmemory); + +static int debugfs_ecmemoryram_show(struct seq_file *s, void *unused) +{ + struct legion_private *priv = s->private; + size_t offset; + ssize_t err; + u8 value; + + for (offset = 0; offset < priv->conf->ramio_size; ++offset) { + err = ecram_memoryio_read(&priv->ec_memoryio, offset, &value); + if (!err) + seq_write(s, &value, 1); + else + return -EACCES; + } + return 0; +} + +DEFINE_SHOW_ATTRIBUTE(debugfs_ecmemoryram); + +//TODO: make (almost) all methods static + +static void seq_file_print_with_error(struct seq_file *s, const char *name, + ssize_t err, int value) +{ + seq_printf(s, "%s error: %ld\n", name, err); + seq_printf(s, "%s: %d\n", name, value); +} + +static int debugfs_fancurve_show(struct seq_file *s, void *unused) +{ + struct legion_private *priv = s->private; + bool is_minifancurve; + bool is_lockfancontroller; + bool is_maximumfanspeed; + bool is_rapidcharge = false; + int powermode; + int temperature; + int fanspeed; + int err; + unsigned long cfg; + struct fancurve wmi_fancurve; + //int kb_backlight; + + mutex_lock(&priv->fancurve_mutex); + + seq_printf(s, "EC Chip ID: %x\n", read_ec_id(&priv->ecram, priv->conf)); + seq_printf(s, "EC Chip Version: %x\n", + read_ec_version(&priv->ecram, priv->conf)); + seq_printf(s, "legion_laptop features: %s\n", LEGIONFEATURES); + seq_printf(s, "legion_laptop ec_readonly: %d\n", ec_readonly); + + err = eval_int(priv->adev->handle, "VPC0._CFG", &cfg); + seq_printf(s, "ACPI CFG error: %d\n", err); + seq_printf(s, "ACPI CFG: %lu\n", cfg); + + seq_printf(s, "temperature access method: %d\n", + priv->conf->access_method_temperature); + err = read_temperature(priv, 0, &temperature); + seq_file_print_with_error(s, "CPU temperature", err, temperature); + err = ec_read_temperature(&priv->ecram, priv->conf, 0, &temperature); + seq_file_print_with_error(s, "CPU temperature EC", err, temperature); + err = acpi_read_temperature(priv, 0, &temperature); + seq_file_print_with_error(s, "CPU temperature ACPI", err, temperature); + err = wmi_read_temperature_gz(0, &temperature); + seq_file_print_with_error(s, "CPU temperature WMI", err, temperature); + err = wmi_read_temperature(0, &temperature); + seq_file_print_with_error(s, "CPU temperature WMI2", err, temperature); + err = wmi_read_temperature_other(0, &temperature); + seq_file_print_with_error(s, "CPU temperature WMI3", err, temperature); + + err = read_temperature(priv, 1, &temperature); + seq_file_print_with_error(s, "GPU temperature", err, temperature); + err = ec_read_temperature(&priv->ecram, priv->conf, 1, &temperature); + seq_file_print_with_error(s, "GPU temperature EC", err, temperature); + err = acpi_read_temperature(priv, 1, &temperature); + seq_file_print_with_error(s, "GPU temperature ACPI", err, temperature); + err = wmi_read_temperature_gz(1, &temperature); + seq_file_print_with_error(s, "GPU temperature WMI", err, temperature); + err = wmi_read_temperature(1, &temperature); + seq_file_print_with_error(s, "GPU temperature WMI2", err, temperature); + err = wmi_read_temperature_other(1, &temperature); + seq_file_print_with_error(s, "GPU temperature WMI3", err, temperature); + + seq_printf(s, "fan speed access method: %d\n", + priv->conf->access_method_fanspeed); + err = read_fanspeed(priv, 0, &fanspeed); + seq_file_print_with_error(s, "1 fanspeed", err, fanspeed); + err = ec_read_fanspeed(&priv->ecram, priv->conf, 0, &fanspeed); + seq_file_print_with_error(s, "1 fanspeed EC", err, fanspeed); + err = acpi_read_fanspeed(priv, 0, &fanspeed); + seq_file_print_with_error(s, "1 fanspeed ACPI", err, fanspeed); + err = wmi_read_fanspeed_gz(0, &fanspeed); + seq_file_print_with_error(s, "1 fanspeed WMI", err, fanspeed); + err = wmi_read_fanspeed(0, &fanspeed); + seq_file_print_with_error(s, "1 fanspeed WMI2", err, fanspeed); + err = wmi_read_fanspeed_other(0, &fanspeed); + seq_file_print_with_error(s, "1 fanspeed WMI3", err, fanspeed); + + err = read_fanspeed(priv, 1, &fanspeed); + seq_file_print_with_error(s, "2 fanspeed", err, fanspeed); + err = ec_read_fanspeed(&priv->ecram, priv->conf, 1, &fanspeed); + seq_file_print_with_error(s, "2 fanspeed EC", err, fanspeed); + err = acpi_read_fanspeed(priv, 1, &fanspeed); + seq_file_print_with_error(s, "2 fanspeed ACPI", err, fanspeed); + err = wmi_read_fanspeed_gz(1, &fanspeed); + seq_file_print_with_error(s, "2 fanspeed WMI", err, fanspeed); + err = wmi_read_fanspeed(1, &fanspeed); + seq_file_print_with_error(s, "2 fanspeed WMI2", err, fanspeed); + err = wmi_read_fanspeed_other(1, &fanspeed); + seq_file_print_with_error(s, "2 fanspeed WMI3", err, fanspeed); + + seq_printf(s, "powermode access method: %d\n", + priv->conf->access_method_powermode); + err = read_powermode(priv, &powermode); + seq_file_print_with_error(s, "powermode", err, powermode); + err = ec_read_powermode(priv, &powermode); + seq_file_print_with_error(s, "powermode EC", err, powermode); + err = acpi_read_powermode(priv, &powermode); + seq_file_print_with_error(s, "powermode ACPI", err, powermode); + err = wmi_read_powermode(&powermode); + seq_file_print_with_error(s, "powermode WMI", err, powermode); + seq_printf(s, "has custom powermode: %d\n", + priv->conf->has_custom_powermode); + + err = acpi_read_rapidcharge(priv->adev, &is_rapidcharge); + seq_printf(s, "ACPI rapidcharge error: %d\n", err); + seq_printf(s, "ACPI rapidcharge: %d\n", is_rapidcharge); + + seq_printf(s, "WMI backlight 2 state: %ld\n", + legion_kbd_bl2_brightness_get(priv)); + seq_printf(s, "WMI backlight 3 state: %d\n", + legion_kbd_bl_brightness_get(priv)); + + seq_printf(s, "WMI light IO port: %d\n", + legion_wmi_light_get(priv, LIGHT_ID_IOPORT, 0, 4)); + + seq_printf(s, "WMI light Y logo/lid: %d\n", + legion_wmi_light_get(priv, LIGHT_ID_YLOGO, 0, 4)); + + seq_printf(s, "EC minifancurve feature enabled: %d\n", + priv->conf->has_minifancurve); + err = ec_read_minifancurve(&priv->ecram, priv->conf, &is_minifancurve); + seq_printf(s, "EC minifancurve on cool: %s\n", + err ? "error" : (is_minifancurve ? "true" : "false")); + + err = ec_read_lockfancontroller(&priv->ecram, priv->conf, + &is_lockfancontroller); + seq_printf(s, "EC lockfancontroller error: %d\n", err); + seq_printf(s, "EC lockfancontroller: %s\n", + err ? "error" : (is_lockfancontroller ? "true" : "false")); + + err = read_fanfullspeed(priv, &is_maximumfanspeed); + seq_file_print_with_error(s, "fanfullspeed", err, is_maximumfanspeed); + + err = ec_read_fanfullspeed(&priv->ecram, priv->conf, + &is_maximumfanspeed); + seq_file_print_with_error(s, "fanfullspeed EC", err, + is_maximumfanspeed); + + read_fancurve(priv, &priv->fancurve); + seq_printf(s, "EC fan curve current point id: %ld\n", + priv->fancurve.current_point_i); + seq_printf(s, "EC fan curve points size: %ld\n", priv->fancurve.size); + + seq_puts(s, "Current fan curve in hardware:\n"); + fancurve_print_seqfile(&priv->fancurve, s); + seq_puts(s, "=====================\n"); + mutex_unlock(&priv->fancurve_mutex); + + seq_puts(s, "Current fan curve in hardware (WMI; might be empty)\n"); + wmi_fancurve.size = 0; + err = wmi_read_fancurve_custom(priv->conf, &wmi_fancurve); + fancurve_print_seqfile(&wmi_fancurve, s); + seq_puts(s, "=====================\n"); + return 0; +} + +DEFINE_SHOW_ATTRIBUTE(debugfs_fancurve); + +static void legion_debugfs_init(struct legion_private *priv) +{ + struct dentry *dir; + + // TODO: remove this note + // Note: like other kernel modules, do not catch errors here + // because if kernel is build without debugfs this + // will return an error but module still has to + // work, just without debugfs + // TODO: what permissions; some modules do 400 + // other do 444 + dir = debugfs_create_dir(LEGION_DRVR_SHORTNAME, NULL); + debugfs_create_file("fancurve", 0444, dir, priv, + &debugfs_fancurve_fops); + debugfs_create_file("ecmemory", 0444, dir, priv, + &debugfs_ecmemory_fops); + debugfs_create_file("ecmemoryram", 0444, dir, priv, + &debugfs_ecmemoryram_fops); + + priv->debugfs_dir = dir; +} + +static void legion_debugfs_exit(struct legion_private *priv) +{ + pr_info("Unloading legion dubugfs\n"); + // The following is does nothing if pointer is NULL + debugfs_remove_recursive(priv->debugfs_dir); + priv->debugfs_dir = NULL; + pr_info("Unloading legion dubugfs done\n"); +} + +/* ============================= */ +/* sysfs interface */ +/* ============================ */ + +static int show_simple_wmi_attribute(struct device *dev, + struct device_attribute *attr, char *buf, + const char *guid, u8 instance, + u32 method_id, bool invert, + unsigned long scale) +{ + unsigned long state = 0; + int err; + struct legion_private *priv = dev_get_drvdata(dev); + + mutex_lock(&priv->fancurve_mutex); + err = get_simple_wmi_attribute(priv, guid, instance, method_id, invert, + scale, &state); + mutex_unlock(&priv->fancurve_mutex); + + if (err) + return -EINVAL; + + return sysfs_emit(buf, "%lu\n", state); +} + +static int show_simple_wmi_attribute_from_buffer(struct device *dev, + struct device_attribute *attr, + char *buf, const char *guid, + u8 instance, u32 method_id, + size_t ressize, size_t i, + int scale) +{ + u8 res[16]; + int err; + int out; + struct legion_private *priv = dev_get_drvdata(dev); + + if (ressize > ARRAY_SIZE(res)) { + pr_info("Buffer too small for WMI result\n"); + return -EINVAL; + } + if (i >= ressize) { + pr_info("Index not within buffer size\n"); + return -EINVAL; + } + + mutex_lock(&priv->fancurve_mutex); + err = wmi_exec_noarg_ints(guid, instance, method_id, res, ressize); + mutex_unlock(&priv->fancurve_mutex); + if (err) + return -EINVAL; + + out = scale * res[i]; + return sysfs_emit(buf, "%d\n", out); +} + +static int store_simple_wmi_attribute(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count, + const char *guid, u8 instance, + u32 method_id, bool invert, int scale) +{ + int state; + int err; + struct legion_private *priv = dev_get_drvdata(dev); + + err = kstrtouint(buf, 0, &state); + if (err) + return err; + err = set_simple_wmi_attribute(priv, guid, instance, method_id, invert, + scale, state); + if (err) + return err; + return count; +} + +static ssize_t lockfancontroller_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct legion_private *priv = dev_get_drvdata(dev); + bool is_lockfancontroller; + int err; + + mutex_lock(&priv->fancurve_mutex); + err = ec_read_lockfancontroller(&priv->ecram, priv->conf, + &is_lockfancontroller); + mutex_unlock(&priv->fancurve_mutex); + if (err) + return -EINVAL; + + return sysfs_emit(buf, "%d\n", is_lockfancontroller); +} + +static ssize_t lockfancontroller_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct legion_private *priv = dev_get_drvdata(dev); + bool is_lockfancontroller; + int err; + + err = kstrtobool(buf, &is_lockfancontroller); + if (err) + return err; + + mutex_lock(&priv->fancurve_mutex); + err = ec_write_lockfancontroller(&priv->ecram, priv->conf, + is_lockfancontroller); + mutex_unlock(&priv->fancurve_mutex); + if (err) + return -EINVAL; + + return count; +} + +static DEVICE_ATTR_RW(lockfancontroller); + +static ssize_t rapidcharge_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + bool state = false; + int err; + struct legion_private *priv = dev_get_drvdata(dev); + + mutex_lock(&priv->fancurve_mutex); + err = acpi_read_rapidcharge(priv->adev, &state); + mutex_unlock(&priv->fancurve_mutex); + if (err) + return -EINVAL; + + return sysfs_emit(buf, "%d\n", state); +} + +static ssize_t rapidcharge_store(struct device *dev, + struct device_attribute *attr, const char *buf, + size_t count) +{ + struct legion_private *priv = dev_get_drvdata(dev); + int state; + int err; + + err = kstrtouint(buf, 0, &state); + if (err) + return err; + + mutex_lock(&priv->fancurve_mutex); + err = acpi_write_rapidcharge(priv->adev, state); + mutex_unlock(&priv->fancurve_mutex); + if (err) + return -EINVAL; + + return count; +} + +static DEVICE_ATTR_RW(rapidcharge); + +static ssize_t issupportgpuoc_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return show_simple_wmi_attribute(dev, attr, buf, + LEGION_WMI_GAMEZONE_GUID, 0, + WMI_METHOD_ID_ISSUPPORTGPUOC, false, + 1); +} + +static DEVICE_ATTR_RO(issupportgpuoc); + +static ssize_t aslcodeversion_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return show_simple_wmi_attribute(dev, attr, buf, + LEGION_WMI_GAMEZONE_GUID, 0, + WMI_METHOD_ID_GETVERSION, false, 1); +} + +static DEVICE_ATTR_RO(aslcodeversion); + +static ssize_t issupportcpuoc_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return show_simple_wmi_attribute(dev, attr, buf, + LEGION_WMI_GAMEZONE_GUID, 0, + WMI_METHOD_ID_ISSUPPORTCPUOC, false, + 1); +} + +static DEVICE_ATTR_RO(issupportcpuoc); + +static ssize_t winkey_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + return show_simple_wmi_attribute(dev, attr, buf, + LEGION_WMI_GAMEZONE_GUID, 0, + WMI_METHOD_ID_GETWINKEYSTATUS, true, + 1); +} + +static ssize_t winkey_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + return store_simple_wmi_attribute(dev, attr, buf, count, + LEGION_WMI_GAMEZONE_GUID, 0, + WMI_METHOD_ID_SETWINKEYSTATUS, true, + 1); +} + +static DEVICE_ATTR_RW(winkey); + +// on newer models the touchpad feature in ideapad does not work anymore, so +// we need this +static ssize_t touchpad_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + return show_simple_wmi_attribute(dev, attr, buf, + LEGION_WMI_GAMEZONE_GUID, 0, + WMI_METHOD_ID_GETTPSTATUS, true, 1); +} + +static ssize_t touchpad_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + return store_simple_wmi_attribute(dev, attr, buf, count, + LEGION_WMI_GAMEZONE_GUID, 0, + WMI_METHOD_ID_SETTPSTATUS, true, 1); +} + +static DEVICE_ATTR_RW(touchpad); + +static ssize_t gsync_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + return show_simple_wmi_attribute(dev, attr, buf, + LEGION_WMI_GAMEZONE_GUID, 0, + WMI_METHOD_ID_GETGSYNCSTATUS, true, 1); +} + +static ssize_t gsync_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + return store_simple_wmi_attribute(dev, attr, buf, count, + LEGION_WMI_GAMEZONE_GUID, 0, + WMI_METHOD_ID_SETGSYNCSTATUS, true, + 1); +} + +static DEVICE_ATTR_RW(gsync); + +static ssize_t powerchargemode_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return show_simple_wmi_attribute(dev, attr, buf, + LEGION_WMI_GAMEZONE_GUID, 0, + WMI_METHOD_ID_GETPOWERCHARGEMODE, + false, 1); +} +static DEVICE_ATTR_RO(powerchargemode); + +static ssize_t overdrive_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + return show_simple_wmi_attribute(dev, attr, buf, + LEGION_WMI_GAMEZONE_GUID, 0, + WMI_METHOD_ID_GETODSTATUS, false, 1); +} + +static ssize_t overdrive_store(struct device *dev, + struct device_attribute *attr, const char *buf, + size_t count) +{ + return store_simple_wmi_attribute(dev, attr, buf, count, + LEGION_WMI_GAMEZONE_GUID, 0, + WMI_METHOD_ID_SETODSTATUS, false, 1); +} + +static DEVICE_ATTR_RW(overdrive); + +static ssize_t thermalmode_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return show_simple_wmi_attribute(dev, attr, buf, + LEGION_WMI_GAMEZONE_GUID, 0, + WMI_METHOD_ID_GETTHERMALMODE, false, + 1); +} +static DEVICE_ATTR_RO(thermalmode); + +// TOOD: probably remove again because provided by other means; only useful for overclocking +static ssize_t cpumaxfrequency_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return show_simple_wmi_attribute(dev, attr, buf, + LEGION_WMI_GAMEZONE_GUID, 0, + WMI_METHOD_ID_GETCPUMAXFREQUENCY, + false, 1); +} +static DEVICE_ATTR_RO(cpumaxfrequency); + +static ssize_t isacfitforoc_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return show_simple_wmi_attribute(dev, attr, buf, + LEGION_WMI_GAMEZONE_GUID, 0, + WMI_METHOD_ID_ISACFITFOROC, false, 1); +} +static DEVICE_ATTR_RO(isacfitforoc); + +static ssize_t igpumode_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + return show_simple_wmi_attribute(dev, attr, buf, + LEGION_WMI_GAMEZONE_GUID, 0, + WMI_METHOD_ID_GETIGPUMODESTATUS, false, + 1); +} + +static ssize_t igpumode_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + return store_simple_wmi_attribute(dev, attr, buf, count, + LEGION_WMI_GAMEZONE_GUID, 0, + WMI_METHOD_ID_SETIGPUMODESTATUS, + false, 1); +} + +static DEVICE_ATTR_RW(igpumode); + +static ssize_t cpu_oc_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + return show_simple_wmi_attribute_from_buffer( + dev, attr, buf, WMI_GUID_LENOVO_CPU_METHOD, 0, + WMI_METHOD_ID_CPU_GET_OC_STATUS, 16, 0, 1); +} + +static ssize_t cpu_oc_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + return store_simple_wmi_attribute(dev, attr, buf, count, + WMI_GUID_LENOVO_CPU_METHOD, 0, + WMI_METHOD_ID_CPU_SET_OC_STATUS, + false, 1); +} + +static DEVICE_ATTR_RW(cpu_oc); + +static ssize_t cpu_shortterm_powerlimit_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + return show_simple_wmi_attribute_from_buffer( + dev, attr, buf, WMI_GUID_LENOVO_CPU_METHOD, 0, + WMI_METHOD_ID_CPU_GET_SHORTTERM_POWERLIMIT, 16, 0, 1); +} + +static ssize_t cpu_shortterm_powerlimit_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + return store_simple_wmi_attribute( + dev, attr, buf, count, WMI_GUID_LENOVO_CPU_METHOD, 0, + WMI_METHOD_ID_CPU_SET_SHORTTERM_POWERLIMIT, false, 1); +} + +static DEVICE_ATTR_RW(cpu_shortterm_powerlimit); + +static ssize_t cpu_longterm_powerlimit_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + return show_simple_wmi_attribute_from_buffer( + dev, attr, buf, WMI_GUID_LENOVO_CPU_METHOD, 0, + WMI_METHOD_ID_CPU_GET_LONGTERM_POWERLIMIT, 16, 0, 1); +} + +static ssize_t cpu_longterm_powerlimit_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + return store_simple_wmi_attribute( + dev, attr, buf, count, WMI_GUID_LENOVO_CPU_METHOD, 0, + WMI_METHOD_ID_CPU_SET_LONGTERM_POWERLIMIT, false, 1); +} + +static DEVICE_ATTR_RW(cpu_longterm_powerlimit); + +static ssize_t cpu_default_powerlimit_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + return show_simple_wmi_attribute( + dev, attr, buf, WMI_GUID_LENOVO_CPU_METHOD, 0, + WMI_METHOD_ID_CPU_GET_DEFAULT_POWERLIMIT, false, 1); +} + +static DEVICE_ATTR_RO(cpu_default_powerlimit); + +static ssize_t cpu_peak_powerlimit_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + return show_simple_wmi_attribute(dev, attr, buf, + WMI_GUID_LENOVO_GPU_METHOD, 0, + WMI_METHOD_ID_CPU_GET_PEAK_POWERLIMIT, + false, 1); +} + +static ssize_t cpu_peak_powerlimit_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + return store_simple_wmi_attribute(dev, attr, buf, count, + WMI_GUID_LENOVO_GPU_METHOD, 0, + WMI_METHOD_ID_CPU_SET_PEAK_POWERLIMIT, + false, 1); +} + +static DEVICE_ATTR_RW(cpu_peak_powerlimit); + +static ssize_t cpu_apu_sppt_powerlimit_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + return show_simple_wmi_attribute( + dev, attr, buf, WMI_GUID_LENOVO_GPU_METHOD, 0, + WMI_METHOD_ID_CPU_GET_APU_SPPT_POWERLIMIT, false, 1); +} + +static ssize_t cpu_apu_sppt_powerlimit_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + return store_simple_wmi_attribute( + dev, attr, buf, count, WMI_GUID_LENOVO_GPU_METHOD, 0, + WMI_METHOD_ID_CPU_SET_APU_SPPT_POWERLIMIT, false, 1); +} + +static DEVICE_ATTR_RW(cpu_apu_sppt_powerlimit); + +static ssize_t cpu_cross_loading_powerlimit_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + return show_simple_wmi_attribute( + dev, attr, buf, WMI_GUID_LENOVO_GPU_METHOD, 0, + WMI_METHOD_ID_CPU_GET_CROSS_LOADING_POWERLIMIT, false, 1); +} + +static ssize_t cpu_cross_loading_powerlimit_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + return store_simple_wmi_attribute( + dev, attr, buf, count, WMI_GUID_LENOVO_GPU_METHOD, 0, + WMI_METHOD_ID_CPU_SET_CROSS_LOADING_POWERLIMIT, false, 1); +} + +static DEVICE_ATTR_RW(cpu_cross_loading_powerlimit); + +static ssize_t gpu_oc_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + return show_simple_wmi_attribute(dev, attr, buf, + WMI_GUID_LENOVO_GPU_METHOD, 0, + WMI_METHOD_ID_GPU_GET_OC_STATUS, false, + 1); +} + +static ssize_t gpu_oc_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + return store_simple_wmi_attribute(dev, attr, buf, count, + WMI_GUID_LENOVO_GPU_METHOD, 0, + WMI_METHOD_ID_GPU_SET_OC_STATUS, + false, 1); +} + +static DEVICE_ATTR_RW(gpu_oc); + +static ssize_t gpu_ppab_powerlimit_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + return show_simple_wmi_attribute_from_buffer( + dev, attr, buf, WMI_GUID_LENOVO_GPU_METHOD, 0, + WMI_METHOD_ID_GPU_GET_PPAB_POWERLIMIT, 16, 0, 1); +} + +static ssize_t gpu_ppab_powerlimit_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + return store_simple_wmi_attribute(dev, attr, buf, count, + WMI_GUID_LENOVO_GPU_METHOD, 0, + WMI_METHOD_ID_GPU_SET_PPAB_POWERLIMIT, + false, 1); +} + +static DEVICE_ATTR_RW(gpu_ppab_powerlimit); + +static ssize_t gpu_ctgp_powerlimit_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + return show_simple_wmi_attribute_from_buffer( + dev, attr, buf, WMI_GUID_LENOVO_GPU_METHOD, 0, + WMI_METHOD_ID_GPU_GET_CTGP_POWERLIMIT, 16, 0, 1); +} + +static ssize_t gpu_ctgp_powerlimit_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + return store_simple_wmi_attribute(dev, attr, buf, count, + WMI_GUID_LENOVO_GPU_METHOD, 0, + WMI_METHOD_ID_GPU_SET_CTGP_POWERLIMIT, + false, 1); +} + +static DEVICE_ATTR_RW(gpu_ctgp_powerlimit); + +static ssize_t gpu_ctgp2_powerlimit_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + return show_simple_wmi_attribute_from_buffer( + dev, attr, buf, WMI_GUID_LENOVO_GPU_METHOD, 0, + WMI_METHOD_ID_GPU_GET_CTGP_POWERLIMIT, 16, 0x0C, 1); +} + +static DEVICE_ATTR_RO(gpu_ctgp2_powerlimit); + +// TOOD: probably remove again because provided by other means; only useful for overclocking +static ssize_t +gpu_default_ppab_ctrgp_powerlimit_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return show_simple_wmi_attribute( + dev, attr, buf, WMI_GUID_LENOVO_GPU_METHOD, 0, + WMI_METHOD_ID_GPU_GET_DEFAULT_PPAB_CTGP_POWERLIMIT, false, 1); +} +static DEVICE_ATTR_RO(gpu_default_ppab_ctrgp_powerlimit); + +static ssize_t gpu_temperature_limit_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + return show_simple_wmi_attribute( + dev, attr, buf, WMI_GUID_LENOVO_GPU_METHOD, 0, + WMI_METHOD_ID_GPU_GET_TEMPERATURE_LIMIT, false, 1); +} + +static ssize_t gpu_temperature_limit_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + return store_simple_wmi_attribute( + dev, attr, buf, count, WMI_GUID_LENOVO_GPU_METHOD, 0, + WMI_METHOD_ID_GPU_SET_TEMPERATURE_LIMIT, false, 1); +} + +static DEVICE_ATTR_RW(gpu_temperature_limit); + +// TOOD: probably remove again because provided by other means; only useful for overclocking +static ssize_t gpu_boost_clock_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return show_simple_wmi_attribute(dev, attr, buf, + WMI_GUID_LENOVO_GPU_METHOD, 0, + WMI_METHOD_ID_GPU_GET_BOOST_CLOCK, + false, 1); +} +static DEVICE_ATTR_RO(gpu_boost_clock); + +static ssize_t fan_fullspeed_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + bool state = false; + int err; + struct legion_private *priv = dev_get_drvdata(dev); + + mutex_lock(&priv->fancurve_mutex); + err = read_fanfullspeed(priv, &state); + mutex_unlock(&priv->fancurve_mutex); + if (err) + return -EINVAL; + + return sysfs_emit(buf, "%d\n", state); +} + +static ssize_t fan_fullspeed_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct legion_private *priv = dev_get_drvdata(dev); + int state; + int err; + + err = kstrtouint(buf, 0, &state); + if (err) + return err; + + mutex_lock(&priv->fancurve_mutex); + err = write_fanfullspeed(priv, state); + mutex_unlock(&priv->fancurve_mutex); + if (err) + return -EINVAL; + + return count; +} + +static DEVICE_ATTR_RW(fan_fullspeed); + +static ssize_t fan_maxspeed_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return show_simple_wmi_attribute(dev, attr, buf, + WMI_GUID_LENOVO_FAN_METHOD, 0, + WMI_METHOD_ID_FAN_GET_MAXSPEED, false, + 1); +} + +static ssize_t fan_maxspeed_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + return store_simple_wmi_attribute(dev, attr, buf, count, + WMI_GUID_LENOVO_FAN_METHOD, 0, + WMI_METHOD_ID_FAN_SET_MAXSPEED, false, + 1); +} + +static DEVICE_ATTR_RW(fan_maxspeed); + +static ssize_t powermode_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct legion_private *priv = dev_get_drvdata(dev); + int power_mode; + + mutex_lock(&priv->fancurve_mutex); + read_powermode(priv, &power_mode); + mutex_unlock(&priv->fancurve_mutex); + return sysfs_emit(buf, "%d\n", power_mode); +} + +static void legion_platform_profile_notify(void); + +static ssize_t powermode_store(struct device *dev, + struct device_attribute *attr, const char *buf, + size_t count) +{ + struct legion_private *priv = dev_get_drvdata(dev); + int powermode; + int err; + + err = kstrtouint(buf, 0, &powermode); + if (err) + return err; + + mutex_lock(&priv->fancurve_mutex); + err = write_powermode(priv, powermode); + mutex_unlock(&priv->fancurve_mutex); + if (err) + return -EINVAL; + + // TODO: better? + // we have to wait a bit before change is done in hardware and + // readback done after notifying returns correct value, otherwise + // the notified reader will read old value + msleep(500); + legion_platform_profile_notify(); + + return count; +} + +static DEVICE_ATTR_RW(powermode); + +static struct attribute *legion_sysfs_attributes[] = { + &dev_attr_powermode.attr, + &dev_attr_lockfancontroller.attr, + &dev_attr_rapidcharge.attr, + &dev_attr_winkey.attr, + &dev_attr_touchpad.attr, + &dev_attr_gsync.attr, + &dev_attr_powerchargemode.attr, + &dev_attr_overdrive.attr, + &dev_attr_cpumaxfrequency.attr, + &dev_attr_isacfitforoc.attr, + &dev_attr_cpu_oc.attr, + &dev_attr_cpu_shortterm_powerlimit.attr, + &dev_attr_cpu_longterm_powerlimit.attr, + &dev_attr_cpu_apu_sppt_powerlimit.attr, + &dev_attr_cpu_default_powerlimit.attr, + &dev_attr_cpu_peak_powerlimit.attr, + &dev_attr_cpu_cross_loading_powerlimit.attr, + &dev_attr_gpu_oc.attr, + &dev_attr_gpu_ppab_powerlimit.attr, + &dev_attr_gpu_ctgp_powerlimit.attr, + &dev_attr_gpu_ctgp2_powerlimit.attr, + &dev_attr_gpu_default_ppab_ctrgp_powerlimit.attr, + &dev_attr_gpu_temperature_limit.attr, + &dev_attr_gpu_boost_clock.attr, + &dev_attr_fan_fullspeed.attr, + &dev_attr_fan_maxspeed.attr, + &dev_attr_thermalmode.attr, + &dev_attr_issupportcpuoc.attr, + &dev_attr_issupportgpuoc.attr, + &dev_attr_aslcodeversion.attr, + &dev_attr_igpumode.attr, + NULL +}; + +static const struct attribute_group legion_attribute_group = { + .attrs = legion_sysfs_attributes +}; + +static int legion_sysfs_init(struct legion_private *priv) +{ + return device_add_group(&priv->platform_device->dev, + &legion_attribute_group); +} + +static void legion_sysfs_exit(struct legion_private *priv) +{ + pr_info("Unloading legion sysfs\n"); + device_remove_group(&priv->platform_device->dev, + &legion_attribute_group); + pr_info("Unloading legion sysfs done\n"); +} + +/* ============================= */ +/* WMI + ACPI */ +/* ============================ */ +// heavily based on ideapad_laptop.c + +// TODO: proper names if meaning of all events is clear +enum LEGION_WMI_EVENT { + LEGION_WMI_EVENT_GAMEZONE = 1, + LEGION_EVENT_A, + LEGION_EVENT_B, + LEGION_EVENT_C, + LEGION_EVENT_D, + LEGION_EVENT_E, + LEGION_EVENT_F, + LEGION_EVENT_G +}; + +struct legion_wmi_private { + enum LEGION_WMI_EVENT event; +}; + +//static void legion_wmi_notify2(u32 value, void *context) +// { +// pr_info("WMI notify\n" ); +// } + +static void legion_wmi_notify(struct wmi_device *wdev, union acpi_object *data) +{ + struct legion_wmi_private *wpriv; + struct legion_private *priv; + + mutex_lock(&legion_shared_mutex); + priv = legion_shared; + if ((!priv) && (priv->loaded)) { + pr_info("Received WMI event while not initialized!\n"); + goto unlock; + } + + wpriv = dev_get_drvdata(&wdev->dev); + switch (wpriv->event) { + case LEGION_EVENT_A: + pr_info("Fan event: legion type: %d; acpi type: %d (%d=integer)", + wpriv->event, data->type, ACPI_TYPE_INTEGER); + // TODO: here it is too early (first unlock mutext, then wait a bit) + //legion_platform_profile_notify(); + break; + default: + pr_info("Event: legion type: %d; acpi type: %d (%d=integer)", + wpriv->event, data->type, ACPI_TYPE_INTEGER); + break; + } + +unlock: + mutex_unlock(&legion_shared_mutex); + // todo; fix that! + // problem: we get an event just before the powermode change (from the key?), + // so if we notify too early, it will read the old power mode/platform profile + msleep(500); + legion_platform_profile_notify(); +} + +static int legion_wmi_probe(struct wmi_device *wdev, const void *context) +{ + struct legion_wmi_private *wpriv; + + wpriv = devm_kzalloc(&wdev->dev, sizeof(*wpriv), GFP_KERNEL); + if (!wpriv) + return -ENOMEM; + + *wpriv = *(const struct legion_wmi_private *)context; + + dev_set_drvdata(&wdev->dev, wpriv); + dev_info(&wdev->dev, "Register after probing for WMI.\n"); + return 0; +} + +static const struct legion_wmi_private legion_wmi_context_gamezone = { + .event = LEGION_WMI_EVENT_GAMEZONE +}; +static const struct legion_wmi_private legion_wmi_context_a = { + .event = LEGION_EVENT_A +}; +static const struct legion_wmi_private legion_wmi_context_b = { + .event = LEGION_EVENT_B +}; +static const struct legion_wmi_private legion_wmi_context_c = { + .event = LEGION_EVENT_C +}; +static const struct legion_wmi_private legion_wmi_context_d = { + .event = LEGION_EVENT_D +}; +static const struct legion_wmi_private legion_wmi_context_e = { + .event = LEGION_EVENT_E +}; +static const struct legion_wmi_private legion_wmi_context_f = { + .event = LEGION_EVENT_F +}; + +#define LEGION_WMI_GUID_FAN_EVENT "D320289E-8FEA-41E0-86F9-611D83151B5F" +#define LEGION_WMI_GUID_FAN2_EVENT "bc72a435-e8c1-4275-b3e2-d8b8074aba59" +#define LEGION_WMI_GUID_GAMEZONE_KEY_EVENT \ + "10afc6d9-ea8b-4590-a2e7-1cd3c84bb4b1" +#define LEGION_WMI_GUID_GAMEZONE_GPU_EVENT \ + "bfd42481-aee3-4502-a107-afb68425c5f8" +#define LEGION_WMI_GUID_GAMEZONE_OC_EVENT "d062906b-12d4-4510-999d-4831ee80e985" +#define LEGION_WMI_GUID_GAMEZONE_TEMP_EVENT \ + "bfd42481-aee3-4501-a107-afb68425c5f8" +//#define LEGION_WMI_GUID_GAMEZONE_DATA_EVENT "887b54e3-dddc-4b2c-8b88-68a26a8835d0" + +static const struct wmi_device_id legion_wmi_ids[] = { + { LEGION_WMI_GAMEZONE_GUID, &legion_wmi_context_gamezone }, + { LEGION_WMI_GUID_FAN_EVENT, &legion_wmi_context_a }, + { LEGION_WMI_GUID_FAN2_EVENT, &legion_wmi_context_b }, + { LEGION_WMI_GUID_GAMEZONE_KEY_EVENT, &legion_wmi_context_c }, + { LEGION_WMI_GUID_GAMEZONE_GPU_EVENT, &legion_wmi_context_d }, + { LEGION_WMI_GUID_GAMEZONE_OC_EVENT, &legion_wmi_context_e }, + { LEGION_WMI_GUID_GAMEZONE_TEMP_EVENT, &legion_wmi_context_f }, + { "8FC0DE0C-B4E4-43FD-B0F3-8871711C1294", + &legion_wmi_context_gamezone }, /* Legion 5 */ + {}, +}; +MODULE_DEVICE_TABLE(wmi, legion_wmi_ids); + +static struct wmi_driver legion_wmi_driver = { + .driver = { + .name = "legion_wmi", + }, + .id_table = legion_wmi_ids, + .probe = legion_wmi_probe, + .notify = legion_wmi_notify, +}; + +//acpi_status status = wmi_install_notify_handler(LEGION_WMI_GAMEZONE_GUID, +// legion_wmi_notify2, NULL); +//if (ACPI_FAILURE(status)) { +// return -ENODEV; +//} +//return 0; + +static int legion_wmi_init(void) +{ + return wmi_driver_register(&legion_wmi_driver); +} + +static void legion_wmi_exit(void) +{ + // TODO: remove this + pr_info("Unloading legion WMI\n"); + + //wmi_remove_notify_handler(LEGION_WMI_GAMEZONE_GUID); + wmi_driver_unregister(&legion_wmi_driver); + pr_info("Unloading legion WMI done\n"); +} + +/* ============================= */ +/* Platform profile */ +/* ============================ */ + +static void legion_platform_profile_notify(void) +{ + if (!enable_platformprofile) + pr_info("Skipping platform_profile_notify because enable_platformprofile is false\n"); + + platform_profile_notify(); +} + +static int legion_platform_profile_get(struct platform_profile_handler *pprof, + enum platform_profile_option *profile) +{ + int powermode; + struct legion_private *priv; + + priv = container_of(pprof, struct legion_private, + platform_profile_handler); + read_powermode(priv, &powermode); + + switch (powermode) { + case LEGION_WMI_POWERMODE_BALANCED: + *profile = PLATFORM_PROFILE_BALANCED; + break; + case LEGION_WMI_POWERMODE_PERFORMANCE: + *profile = PLATFORM_PROFILE_PERFORMANCE; + break; + case LEGION_WMI_POWERMODE_QUIET: + *profile = PLATFORM_PROFILE_QUIET; + break; + case LEGION_WMI_POWERMODE_CUSTOM: + *profile = PLATFORM_PROFILE_BALANCED_PERFORMANCE; + break; + default: + return -EINVAL; + } + return 0; +} + +static int legion_platform_profile_set(struct platform_profile_handler *pprof, + enum platform_profile_option profile) +{ + int powermode; + struct legion_private *priv; + + priv = container_of(pprof, struct legion_private, + platform_profile_handler); + + switch (profile) { + case PLATFORM_PROFILE_BALANCED: + powermode = LEGION_WMI_POWERMODE_BALANCED; + break; + case PLATFORM_PROFILE_PERFORMANCE: + powermode = LEGION_WMI_POWERMODE_PERFORMANCE; + break; + case PLATFORM_PROFILE_QUIET: + powermode = LEGION_WMI_POWERMODE_QUIET; + break; + case PLATFORM_PROFILE_BALANCED_PERFORMANCE: + powermode = LEGION_WMI_POWERMODE_CUSTOM; + break; + default: + return -EOPNOTSUPP; + } + + return write_powermode(priv, powermode); +} + +static int legion_platform_profile_init(struct legion_private *priv) +{ + int err; + + if (!enable_platformprofile) { + pr_info("Skipping creating platform profile support because enable_platformprofile is false\n"); + return 0; + } + + priv->platform_profile_handler.profile_get = + legion_platform_profile_get; + priv->platform_profile_handler.profile_set = + legion_platform_profile_set; + + set_bit(PLATFORM_PROFILE_QUIET, priv->platform_profile_handler.choices); + set_bit(PLATFORM_PROFILE_BALANCED, + priv->platform_profile_handler.choices); + set_bit(PLATFORM_PROFILE_PERFORMANCE, + priv->platform_profile_handler.choices); + if (priv->conf->has_custom_powermode && + priv->conf->access_method_powermode == ACCESS_METHOD_WMI) { + set_bit(PLATFORM_PROFILE_BALANCED_PERFORMANCE, + priv->platform_profile_handler.choices); + } + + err = platform_profile_register(&priv->platform_profile_handler); + if (err) + return err; + + return 0; +} + +static void legion_platform_profile_exit(struct legion_private *priv) +{ + if (!enable_platformprofile) { + pr_info("Skipping unloading platform profile support because enable_platformprofile is false\n"); + return; + } + pr_info("Unloading legion platform profile\n"); + platform_profile_remove(); + pr_info("Unloading legion platform profile done\n"); +} + +/* ============================= */ +/* hwom interface */ +/* ============================ */ + +// hw-mon interface + +// todo: register_group or register_info? + +// TODO: use one common function (like here) or one function per attribute? +static ssize_t sensor_label_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int sensor_id = (to_sensor_dev_attr(attr))->index; + const char *label; + + switch (sensor_id) { + case SENSOR_CPU_TEMP_ID: + label = "CPU Temperature\n"; + break; + case SENSOR_GPU_TEMP_ID: + label = "GPU Temperature\n"; + break; + case SENSOR_IC_TEMP_ID: + label = "IC Temperature\n"; + break; + case SENSOR_FAN1_RPM_ID: + label = "Fan 1\n"; + break; + case SENSOR_FAN2_RPM_ID: + label = "Fan 2\n"; + break; + case SENSOR_FAN1_TARGET_RPM_ID: + label = "Fan 1 Target\n"; + break; + case SENSOR_FAN2_TARGET_RPM_ID: + label = "Fan 2 Target\n"; + break; + default: + return -EOPNOTSUPP; + } + + return sprintf(buf, label); +} + +// TODO: use one common function (like here) or one function per attribute? +static ssize_t sensor_show(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + struct legion_private *priv = dev_get_drvdata(dev); + int sensor_id = (to_sensor_dev_attr(devattr))->index; + struct sensor_values values; + int outval; + int err = -EIO; + + switch (sensor_id) { + case SENSOR_CPU_TEMP_ID: + err = read_temperature(priv, 0, &outval); + outval *= 1000; + break; + case SENSOR_GPU_TEMP_ID: + err = read_temperature(priv, 1, &outval); + outval *= 1000; + break; + case SENSOR_IC_TEMP_ID: + ec_read_sensor_values(&priv->ecram, priv->conf, &values); + outval = 1000 * values.ic_temp_celsius; + err = 0; + break; + case SENSOR_FAN1_RPM_ID: + err = read_fanspeed(priv, 0, &outval); + break; + case SENSOR_FAN2_RPM_ID: + err = read_fanspeed(priv, 1, &outval); + break; + case SENSOR_FAN1_TARGET_RPM_ID: + ec_read_sensor_values(&priv->ecram, priv->conf, &values); + outval = values.fan1_target_rpm; + err = 0; + break; + case SENSOR_FAN2_TARGET_RPM_ID: + ec_read_sensor_values(&priv->ecram, priv->conf, &values); + outval = values.fan2_target_rpm; + err = 0; + break; + default: + pr_info("Error reading sensor value with id %d\n", sensor_id); + return -EOPNOTSUPP; + } + if (err) + return err; + + return sprintf(buf, "%d\n", outval); +} + +static SENSOR_DEVICE_ATTR_RO(temp1_input, sensor, SENSOR_CPU_TEMP_ID); +static SENSOR_DEVICE_ATTR_RO(temp1_label, sensor_label, SENSOR_CPU_TEMP_ID); +static SENSOR_DEVICE_ATTR_RO(temp2_input, sensor, SENSOR_GPU_TEMP_ID); +static SENSOR_DEVICE_ATTR_RO(temp2_label, sensor_label, SENSOR_GPU_TEMP_ID); +static SENSOR_DEVICE_ATTR_RO(temp3_input, sensor, SENSOR_IC_TEMP_ID); +static SENSOR_DEVICE_ATTR_RO(temp3_label, sensor_label, SENSOR_IC_TEMP_ID); +static SENSOR_DEVICE_ATTR_RO(fan1_input, sensor, SENSOR_FAN1_RPM_ID); +static SENSOR_DEVICE_ATTR_RO(fan1_label, sensor_label, SENSOR_FAN1_RPM_ID); +static SENSOR_DEVICE_ATTR_RO(fan2_input, sensor, SENSOR_FAN2_RPM_ID); +static SENSOR_DEVICE_ATTR_RO(fan2_label, sensor_label, SENSOR_FAN2_RPM_ID); +static SENSOR_DEVICE_ATTR_RO(fan1_target, sensor, SENSOR_FAN1_TARGET_RPM_ID); +static SENSOR_DEVICE_ATTR_RO(fan2_target, sensor, SENSOR_FAN2_TARGET_RPM_ID); + +static struct attribute *sensor_hwmon_attributes[] = { + &sensor_dev_attr_temp1_input.dev_attr.attr, + &sensor_dev_attr_temp1_label.dev_attr.attr, + &sensor_dev_attr_temp2_input.dev_attr.attr, + &sensor_dev_attr_temp2_label.dev_attr.attr, + &sensor_dev_attr_temp3_input.dev_attr.attr, + &sensor_dev_attr_temp3_label.dev_attr.attr, + &sensor_dev_attr_fan1_input.dev_attr.attr, + &sensor_dev_attr_fan1_label.dev_attr.attr, + &sensor_dev_attr_fan2_input.dev_attr.attr, + &sensor_dev_attr_fan2_label.dev_attr.attr, + &sensor_dev_attr_fan1_target.dev_attr.attr, + &sensor_dev_attr_fan2_target.dev_attr.attr, + NULL +}; + +static ssize_t autopoint_show(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + struct fancurve fancurve; + int err; + int value; + struct legion_private *priv = dev_get_drvdata(dev); + int fancurve_attr_id = to_sensor_dev_attr_2(devattr)->nr; + int point_id = to_sensor_dev_attr_2(devattr)->index; + + mutex_lock(&priv->fancurve_mutex); + err = read_fancurve(priv, &fancurve); + mutex_unlock(&priv->fancurve_mutex); + + if (err) { + pr_info("Failed to read fancurve\n"); + return -EOPNOTSUPP; + } + if (!(point_id >= 0 && point_id < MAXFANCURVESIZE)) { + pr_info("Failed to read fancurve due to wrong point id: %d\n", + point_id); + return -EOPNOTSUPP; + } + + switch (fancurve_attr_id) { + case FANCURVE_ATTR_PWM1: + value = fancurve.points[point_id].rpm1_raw * 100; + break; + case FANCURVE_ATTR_PWM2: + value = fancurve.points[point_id].rpm2_raw * 100; + break; + case FANCURVE_ATTR_CPU_TEMP: + value = fancurve.points[point_id].cpu_max_temp_celsius; + break; + case FANCURVE_ATTR_CPU_HYST: + value = fancurve.points[point_id].cpu_min_temp_celsius; + break; + case FANCURVE_ATTR_GPU_TEMP: + value = fancurve.points[point_id].gpu_max_temp_celsius; + break; + case FANCURVE_ATTR_GPU_HYST: + value = fancurve.points[point_id].gpu_min_temp_celsius; + break; + case FANCURVE_ATTR_IC_TEMP: + value = fancurve.points[point_id].ic_max_temp_celsius; + break; + case FANCURVE_ATTR_IC_HYST: + value = fancurve.points[point_id].ic_min_temp_celsius; + break; + case FANCURVE_ATTR_ACCEL: + value = fancurve.points[point_id].accel; + break; + case FANCURVE_ATTR_DECEL: + value = fancurve.points[point_id].decel; + break; + case FANCURVE_SIZE: + value = fancurve.size; + break; + default: + pr_info("Failed to read fancurve due to wrong attribute id: %d\n", + fancurve_attr_id); + return -EOPNOTSUPP; + } + + return sprintf(buf, "%d\n", value); +} + +static ssize_t autopoint_store(struct device *dev, + struct device_attribute *devattr, + const char *buf, size_t count) +{ + struct fancurve fancurve; + int err; + int value; + bool valid; + struct legion_private *priv = dev_get_drvdata(dev); + int fancurve_attr_id = to_sensor_dev_attr_2(devattr)->nr; + int point_id = to_sensor_dev_attr_2(devattr)->index; + bool write_fancurve_size = false; + + if (!(point_id >= 0 && point_id < MAXFANCURVESIZE)) { + pr_info("Failed to read fancurve due to wrong point id: %d\n", + point_id); + err = -EOPNOTSUPP; + goto error; + } + + err = kstrtoint(buf, 0, &value); + if (err) { + pr_info("Parsing hwmon store failed: error: %d; point_id: %d; fancurve_attr_id: %d\\n", + err, point_id, fancurve_attr_id); + goto error; + } + + mutex_lock(&priv->fancurve_mutex); + err = read_fancurve(priv, &fancurve); + + if (err) { + pr_info("Failed to read fancurve\n"); + err = -EOPNOTSUPP; + goto error_mutex; + } + + switch (fancurve_attr_id) { + case FANCURVE_ATTR_PWM1: + valid = fancurve_set_rpm1(&fancurve, point_id, value); + break; + case FANCURVE_ATTR_PWM2: + valid = fancurve_set_rpm2(&fancurve, point_id, value); + break; + case FANCURVE_ATTR_CPU_TEMP: + valid = fancurve_set_cpu_temp_max(&fancurve, point_id, value); + break; + case FANCURVE_ATTR_CPU_HYST: + valid = fancurve_set_cpu_temp_min(&fancurve, point_id, value); + break; + case FANCURVE_ATTR_GPU_TEMP: + valid = fancurve_set_gpu_temp_max(&fancurve, point_id, value); + break; + case FANCURVE_ATTR_GPU_HYST: + valid = fancurve_set_gpu_temp_min(&fancurve, point_id, value); + break; + case FANCURVE_ATTR_IC_TEMP: + valid = fancurve_set_ic_temp_max(&fancurve, point_id, value); + break; + case FANCURVE_ATTR_IC_HYST: + valid = fancurve_set_ic_temp_min(&fancurve, point_id, value); + break; + case FANCURVE_ATTR_ACCEL: + valid = fancurve_set_accel(&fancurve, point_id, value); + break; + case FANCURVE_ATTR_DECEL: + valid = fancurve_set_decel(&fancurve, point_id, value); + break; + case FANCURVE_SIZE: + valid = fancurve_set_size(&fancurve, value, true); + write_fancurve_size = true; + break; + default: + pr_info("Failed to write fancurve due to wrong attribute id: %d\n", + fancurve_attr_id); + err = -EOPNOTSUPP; + goto error_mutex; + } + + if (!valid) { + pr_info("Ignoring invalid fancurve value %d for attribute %d at point %d\n", + value, fancurve_attr_id, point_id); + err = -EOPNOTSUPP; + goto error_mutex; + } + + err = write_fancurve(priv, &fancurve, write_fancurve_size); + if (err) { + pr_info("Failed to write fancurve for accessing hwmon at point_id: %d\n", + point_id); + err = -EOPNOTSUPP; + goto error_mutex; + } + + mutex_unlock(&priv->fancurve_mutex); + return count; + +error_mutex: + mutex_unlock(&priv->fancurve_mutex); +error: + return count; +} + +// rpm1 +static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point1_pwm, autopoint, + FANCURVE_ATTR_PWM1, 0); +static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point2_pwm, autopoint, + FANCURVE_ATTR_PWM1, 1); +static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point3_pwm, autopoint, + FANCURVE_ATTR_PWM1, 2); +static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point4_pwm, autopoint, + FANCURVE_ATTR_PWM1, 3); +static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point5_pwm, autopoint, + FANCURVE_ATTR_PWM1, 4); +static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point6_pwm, autopoint, + FANCURVE_ATTR_PWM1, 5); +static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point7_pwm, autopoint, + FANCURVE_ATTR_PWM1, 6); +static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point8_pwm, autopoint, + FANCURVE_ATTR_PWM1, 7); +static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point9_pwm, autopoint, + FANCURVE_ATTR_PWM1, 8); +static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point10_pwm, autopoint, + FANCURVE_ATTR_PWM1, 9); +// rpm2 +static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point1_pwm, autopoint, + FANCURVE_ATTR_PWM2, 0); +static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point2_pwm, autopoint, + FANCURVE_ATTR_PWM2, 1); +static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point3_pwm, autopoint, + FANCURVE_ATTR_PWM2, 2); +static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point4_pwm, autopoint, + FANCURVE_ATTR_PWM2, 3); +static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point5_pwm, autopoint, + FANCURVE_ATTR_PWM2, 4); +static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point6_pwm, autopoint, + FANCURVE_ATTR_PWM2, 5); +static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point7_pwm, autopoint, + FANCURVE_ATTR_PWM2, 6); +static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point8_pwm, autopoint, + FANCURVE_ATTR_PWM2, 7); +static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point9_pwm, autopoint, + FANCURVE_ATTR_PWM2, 8); +static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point10_pwm, autopoint, + FANCURVE_ATTR_PWM2, 9); +// CPU temp +static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point1_temp, autopoint, + FANCURVE_ATTR_CPU_TEMP, 0); +static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point2_temp, autopoint, + FANCURVE_ATTR_CPU_TEMP, 1); +static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point3_temp, autopoint, + FANCURVE_ATTR_CPU_TEMP, 2); +static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point4_temp, autopoint, + FANCURVE_ATTR_CPU_TEMP, 3); +static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point5_temp, autopoint, + FANCURVE_ATTR_CPU_TEMP, 4); +static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point6_temp, autopoint, + FANCURVE_ATTR_CPU_TEMP, 5); +static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point7_temp, autopoint, + FANCURVE_ATTR_CPU_TEMP, 6); +static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point8_temp, autopoint, + FANCURVE_ATTR_CPU_TEMP, 7); +static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point9_temp, autopoint, + FANCURVE_ATTR_CPU_TEMP, 8); +static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point10_temp, autopoint, + FANCURVE_ATTR_CPU_TEMP, 9); +// CPU temp hyst +static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point1_temp_hyst, autopoint, + FANCURVE_ATTR_CPU_HYST, 0); +static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point2_temp_hyst, autopoint, + FANCURVE_ATTR_CPU_HYST, 1); +static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point3_temp_hyst, autopoint, + FANCURVE_ATTR_CPU_HYST, 2); +static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point4_temp_hyst, autopoint, + FANCURVE_ATTR_CPU_HYST, 3); +static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point5_temp_hyst, autopoint, + FANCURVE_ATTR_CPU_HYST, 4); +static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point6_temp_hyst, autopoint, + FANCURVE_ATTR_CPU_HYST, 5); +static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point7_temp_hyst, autopoint, + FANCURVE_ATTR_CPU_HYST, 6); +static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point8_temp_hyst, autopoint, + FANCURVE_ATTR_CPU_HYST, 7); +static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point9_temp_hyst, autopoint, + FANCURVE_ATTR_CPU_HYST, 8); +static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point10_temp_hyst, autopoint, + FANCURVE_ATTR_CPU_HYST, 9); +// GPU temp +static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point1_temp, autopoint, + FANCURVE_ATTR_GPU_TEMP, 0); +static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point2_temp, autopoint, + FANCURVE_ATTR_GPU_TEMP, 1); +static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point3_temp, autopoint, + FANCURVE_ATTR_GPU_TEMP, 2); +static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point4_temp, autopoint, + FANCURVE_ATTR_GPU_TEMP, 3); +static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point5_temp, autopoint, + FANCURVE_ATTR_GPU_TEMP, 4); +static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point6_temp, autopoint, + FANCURVE_ATTR_GPU_TEMP, 5); +static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point7_temp, autopoint, + FANCURVE_ATTR_GPU_TEMP, 6); +static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point8_temp, autopoint, + FANCURVE_ATTR_GPU_TEMP, 7); +static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point9_temp, autopoint, + FANCURVE_ATTR_GPU_TEMP, 8); +static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point10_temp, autopoint, + FANCURVE_ATTR_GPU_TEMP, 9); +// GPU temp hyst +static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point1_temp_hyst, autopoint, + FANCURVE_ATTR_GPU_HYST, 0); +static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point2_temp_hyst, autopoint, + FANCURVE_ATTR_GPU_HYST, 1); +static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point3_temp_hyst, autopoint, + FANCURVE_ATTR_GPU_HYST, 2); +static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point4_temp_hyst, autopoint, + FANCURVE_ATTR_GPU_HYST, 3); +static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point5_temp_hyst, autopoint, + FANCURVE_ATTR_GPU_HYST, 4); +static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point6_temp_hyst, autopoint, + FANCURVE_ATTR_GPU_HYST, 5); +static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point7_temp_hyst, autopoint, + FANCURVE_ATTR_GPU_HYST, 6); +static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point8_temp_hyst, autopoint, + FANCURVE_ATTR_GPU_HYST, 7); +static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point9_temp_hyst, autopoint, + FANCURVE_ATTR_GPU_HYST, 8); +static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point10_temp_hyst, autopoint, + FANCURVE_ATTR_GPU_HYST, 9); +// IC temp +static SENSOR_DEVICE_ATTR_2_RW(pwm3_auto_point1_temp, autopoint, + FANCURVE_ATTR_IC_TEMP, 0); +static SENSOR_DEVICE_ATTR_2_RW(pwm3_auto_point2_temp, autopoint, + FANCURVE_ATTR_IC_TEMP, 1); +static SENSOR_DEVICE_ATTR_2_RW(pwm3_auto_point3_temp, autopoint, + FANCURVE_ATTR_IC_TEMP, 2); +static SENSOR_DEVICE_ATTR_2_RW(pwm3_auto_point4_temp, autopoint, + FANCURVE_ATTR_IC_TEMP, 3); +static SENSOR_DEVICE_ATTR_2_RW(pwm3_auto_point5_temp, autopoint, + FANCURVE_ATTR_IC_TEMP, 4); +static SENSOR_DEVICE_ATTR_2_RW(pwm3_auto_point6_temp, autopoint, + FANCURVE_ATTR_IC_TEMP, 5); +static SENSOR_DEVICE_ATTR_2_RW(pwm3_auto_point7_temp, autopoint, + FANCURVE_ATTR_IC_TEMP, 6); +static SENSOR_DEVICE_ATTR_2_RW(pwm3_auto_point8_temp, autopoint, + FANCURVE_ATTR_IC_TEMP, 7); +static SENSOR_DEVICE_ATTR_2_RW(pwm3_auto_point9_temp, autopoint, + FANCURVE_ATTR_IC_TEMP, 8); +static SENSOR_DEVICE_ATTR_2_RW(pwm3_auto_point10_temp, autopoint, + FANCURVE_ATTR_IC_TEMP, 9); +// IC temp hyst +static SENSOR_DEVICE_ATTR_2_RW(pwm3_auto_point1_temp_hyst, autopoint, + FANCURVE_ATTR_IC_HYST, 0); +static SENSOR_DEVICE_ATTR_2_RW(pwm3_auto_point2_temp_hyst, autopoint, + FANCURVE_ATTR_IC_HYST, 1); +static SENSOR_DEVICE_ATTR_2_RW(pwm3_auto_point3_temp_hyst, autopoint, + FANCURVE_ATTR_IC_HYST, 2); +static SENSOR_DEVICE_ATTR_2_RW(pwm3_auto_point4_temp_hyst, autopoint, + FANCURVE_ATTR_IC_HYST, 3); +static SENSOR_DEVICE_ATTR_2_RW(pwm3_auto_point5_temp_hyst, autopoint, + FANCURVE_ATTR_IC_HYST, 4); +static SENSOR_DEVICE_ATTR_2_RW(pwm3_auto_point6_temp_hyst, autopoint, + FANCURVE_ATTR_IC_HYST, 5); +static SENSOR_DEVICE_ATTR_2_RW(pwm3_auto_point7_temp_hyst, autopoint, + FANCURVE_ATTR_IC_HYST, 6); +static SENSOR_DEVICE_ATTR_2_RW(pwm3_auto_point8_temp_hyst, autopoint, + FANCURVE_ATTR_IC_HYST, 7); +static SENSOR_DEVICE_ATTR_2_RW(pwm3_auto_point9_temp_hyst, autopoint, + FANCURVE_ATTR_IC_HYST, 8); +static SENSOR_DEVICE_ATTR_2_RW(pwm3_auto_point10_temp_hyst, autopoint, + FANCURVE_ATTR_IC_HYST, 9); +// accel +static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point1_accel, autopoint, + FANCURVE_ATTR_ACCEL, 0); +static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point2_accel, autopoint, + FANCURVE_ATTR_ACCEL, 1); +static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point3_accel, autopoint, + FANCURVE_ATTR_ACCEL, 2); +static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point4_accel, autopoint, + FANCURVE_ATTR_ACCEL, 3); +static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point5_accel, autopoint, + FANCURVE_ATTR_ACCEL, 4); +static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point6_accel, autopoint, + FANCURVE_ATTR_ACCEL, 5); +static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point7_accel, autopoint, + FANCURVE_ATTR_ACCEL, 6); +static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point8_accel, autopoint, + FANCURVE_ATTR_ACCEL, 7); +static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point9_accel, autopoint, + FANCURVE_ATTR_ACCEL, 8); +static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point10_accel, autopoint, + FANCURVE_ATTR_ACCEL, 9); +// decel +static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point1_decel, autopoint, + FANCURVE_ATTR_DECEL, 0); +static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point2_decel, autopoint, + FANCURVE_ATTR_DECEL, 1); +static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point3_decel, autopoint, + FANCURVE_ATTR_DECEL, 2); +static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point4_decel, autopoint, + FANCURVE_ATTR_DECEL, 3); +static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point5_decel, autopoint, + FANCURVE_ATTR_DECEL, 4); +static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point6_decel, autopoint, + FANCURVE_ATTR_DECEL, 5); +static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point7_decel, autopoint, + FANCURVE_ATTR_DECEL, 6); +static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point8_decel, autopoint, + FANCURVE_ATTR_DECEL, 7); +static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point9_decel, autopoint, + FANCURVE_ATTR_DECEL, 8); +static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point10_decel, autopoint, + FANCURVE_ATTR_DECEL, 9); +//size +static SENSOR_DEVICE_ATTR_2_RW(auto_points_size, autopoint, FANCURVE_SIZE, 0); + +static ssize_t minifancurve_show(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + bool value; + int err; + struct legion_private *priv = dev_get_drvdata(dev); + + mutex_lock(&priv->fancurve_mutex); + err = ec_read_minifancurve(&priv->ecram, priv->conf, &value); + if (err) { + err = -1; + pr_info("Failed to read minifancurve\n"); + goto error_unlock; + } + mutex_unlock(&priv->fancurve_mutex); + return sprintf(buf, "%d\n", value); + +error_unlock: + mutex_unlock(&priv->fancurve_mutex); + return -1; +} + +static ssize_t minifancurve_store(struct device *dev, + struct device_attribute *devattr, + const char *buf, size_t count) +{ + int value; + int err; + struct legion_private *priv = dev_get_drvdata(dev); + + err = kstrtoint(buf, 0, &value); + if (err) { + err = -1; + pr_info("Parsing hwmon store failed: error:%d\n", + err); + goto error; + } + + mutex_lock(&priv->fancurve_mutex); + err = ec_write_minifancurve(&priv->ecram, priv->conf, value); + if (err) { + err = -1; + pr_info("Failed to write minifancurve\n"); + goto error_unlock; + } + mutex_unlock(&priv->fancurve_mutex); + return count; + +error_unlock: + mutex_unlock(&priv->fancurve_mutex); +error: + return err; +} + +static SENSOR_DEVICE_ATTR_RW(minifancurve, minifancurve, 0); + +static ssize_t pwm1_mode_show(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + bool value; + int err; + struct legion_private *priv = dev_get_drvdata(dev); + + mutex_lock(&priv->fancurve_mutex); + err = ec_read_fanfullspeed(&priv->ecram, priv->conf, &value); + if (err) { + err = -1; + pr_info("Failed to pwm1_mode/maximumfanspeed\n"); + goto error_unlock; + } + mutex_unlock(&priv->fancurve_mutex); + return sprintf(buf, "%d\n", value ? 0 : 2); + +error_unlock: + mutex_unlock(&priv->fancurve_mutex); + return -1; +} + +// TODO: remove? or use WMI method? +static ssize_t pwm1_mode_store(struct device *dev, + struct device_attribute *devattr, + const char *buf, size_t count) +{ + int value; + int is_maximumfanspeed; + int err; + struct legion_private *priv = dev_get_drvdata(dev); + + err = kstrtoint(buf, 0, &value); + if (err) { + err = -1; + pr_info("Parsing hwmon store failed: error:%d\n", + err); + goto error; + } + is_maximumfanspeed = value == 0; + + mutex_lock(&priv->fancurve_mutex); + err = ec_write_fanfullspeed(&priv->ecram, priv->conf, + is_maximumfanspeed); + if (err) { + err = -1; + pr_info("Failed to write pwm1_mode/maximumfanspeed\n"); + goto error_unlock; + } + mutex_unlock(&priv->fancurve_mutex); + return count; + +error_unlock: + mutex_unlock(&priv->fancurve_mutex); +error: + return err; +} + +static SENSOR_DEVICE_ATTR_RW(pwm1_mode, pwm1_mode, 0); + +static struct attribute *fancurve_hwmon_attributes[] = { + &sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point3_pwm.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point4_pwm.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point5_pwm.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point6_pwm.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point7_pwm.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point8_pwm.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point9_pwm.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point10_pwm.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_point3_pwm.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_point4_pwm.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_point5_pwm.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_point6_pwm.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_point7_pwm.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_point8_pwm.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_point9_pwm.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_point10_pwm.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point1_temp.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point2_temp.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point3_temp.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point4_temp.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point5_temp.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point6_temp.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point7_temp.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point8_temp.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point9_temp.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point10_temp.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point1_temp_hyst.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point2_temp_hyst.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point3_temp_hyst.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point4_temp_hyst.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point5_temp_hyst.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point6_temp_hyst.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point7_temp_hyst.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point8_temp_hyst.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point9_temp_hyst.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point10_temp_hyst.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_point1_temp.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_point2_temp.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_point3_temp.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_point4_temp.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_point5_temp.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_point6_temp.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_point7_temp.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_point8_temp.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_point9_temp.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_point10_temp.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_point1_temp_hyst.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_point2_temp_hyst.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_point3_temp_hyst.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_point4_temp_hyst.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_point5_temp_hyst.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_point6_temp_hyst.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_point7_temp_hyst.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_point8_temp_hyst.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_point9_temp_hyst.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_point10_temp_hyst.dev_attr.attr, + &sensor_dev_attr_pwm3_auto_point1_temp.dev_attr.attr, + &sensor_dev_attr_pwm3_auto_point2_temp.dev_attr.attr, + &sensor_dev_attr_pwm3_auto_point3_temp.dev_attr.attr, + &sensor_dev_attr_pwm3_auto_point4_temp.dev_attr.attr, + &sensor_dev_attr_pwm3_auto_point5_temp.dev_attr.attr, + &sensor_dev_attr_pwm3_auto_point6_temp.dev_attr.attr, + &sensor_dev_attr_pwm3_auto_point7_temp.dev_attr.attr, + &sensor_dev_attr_pwm3_auto_point8_temp.dev_attr.attr, + &sensor_dev_attr_pwm3_auto_point9_temp.dev_attr.attr, + &sensor_dev_attr_pwm3_auto_point10_temp.dev_attr.attr, + &sensor_dev_attr_pwm3_auto_point1_temp_hyst.dev_attr.attr, + &sensor_dev_attr_pwm3_auto_point2_temp_hyst.dev_attr.attr, + &sensor_dev_attr_pwm3_auto_point3_temp_hyst.dev_attr.attr, + &sensor_dev_attr_pwm3_auto_point4_temp_hyst.dev_attr.attr, + &sensor_dev_attr_pwm3_auto_point5_temp_hyst.dev_attr.attr, + &sensor_dev_attr_pwm3_auto_point6_temp_hyst.dev_attr.attr, + &sensor_dev_attr_pwm3_auto_point7_temp_hyst.dev_attr.attr, + &sensor_dev_attr_pwm3_auto_point8_temp_hyst.dev_attr.attr, + &sensor_dev_attr_pwm3_auto_point9_temp_hyst.dev_attr.attr, + &sensor_dev_attr_pwm3_auto_point10_temp_hyst.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point1_accel.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point2_accel.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point3_accel.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point4_accel.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point5_accel.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point6_accel.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point7_accel.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point8_accel.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point9_accel.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point10_accel.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point1_decel.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point2_decel.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point3_decel.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point4_decel.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point5_decel.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point6_decel.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point7_decel.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point8_decel.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point9_decel.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point10_decel.dev_attr.attr, + // + &sensor_dev_attr_auto_points_size.dev_attr.attr, + &sensor_dev_attr_minifancurve.dev_attr.attr, + &sensor_dev_attr_pwm1_mode.dev_attr.attr, NULL +}; + +static umode_t legion_hwmon_is_visible(struct kobject *kobj, + struct attribute *attr, int idx) +{ + bool supported = true; + struct device *dev = kobj_to_dev(kobj); + struct legion_private *priv = dev_get_drvdata(dev); + + if (attr == &sensor_dev_attr_minifancurve.dev_attr.attr) + supported = priv->conf->has_minifancurve; + + supported = supported && (priv->conf->access_method_fancurve != + ACCESS_METHOD_NO_ACCESS); + + return supported ? attr->mode : 0; +} + +static const struct attribute_group legion_hwmon_sensor_group = { + .attrs = sensor_hwmon_attributes, + .is_visible = NULL +}; + +static const struct attribute_group legion_hwmon_fancurve_group = { + .attrs = fancurve_hwmon_attributes, + .is_visible = legion_hwmon_is_visible, +}; + +static const struct attribute_group *legion_hwmon_groups[] = { + &legion_hwmon_sensor_group, &legion_hwmon_fancurve_group, NULL +}; + +static ssize_t legion_hwmon_init(struct legion_private *priv) +{ + //TODO: use hwmon_device_register_with_groups or + // hwmon_device_register_with_info (latter means all hwmon functions have to be + // changed) + // some laptop driver do it in one way, some in the other + // TODO: Use devm_hwmon_device_register_with_groups ? + // some laptop drivers use this, some + struct device *hwmon_dev = hwmon_device_register_with_groups( + &priv->platform_device->dev, "legion_hwmon", priv, + legion_hwmon_groups); + if (IS_ERR_OR_NULL(hwmon_dev)) { + pr_err("hwmon_device_register failed!\n"); + return PTR_ERR(hwmon_dev); + } + dev_set_drvdata(hwmon_dev, priv); + priv->hwmon_dev = hwmon_dev; + return 0; +} + +static void legion_hwmon_exit(struct legion_private *priv) +{ + pr_info("Unloading legion hwon\n"); + if (priv->hwmon_dev) { + hwmon_device_unregister(priv->hwmon_dev); + priv->hwmon_dev = NULL; + } + pr_info("Unloading legion hwon done\n"); +} + +/* ACPI*/ + +static int acpi_init(struct legion_private *priv, struct acpi_device *adev) +{ + int err; + unsigned long cfg; + bool skip_acpi_sta_check; + struct device *dev = &priv->platform_device->dev; + + priv->adev = adev; + if (!priv->adev) { + dev_info(dev, "Could not get ACPI handle\n"); + goto err_acpi_init; + } + + skip_acpi_sta_check = force || (!priv->conf->acpi_check_dev); + if (!skip_acpi_sta_check) { + err = eval_int(priv->adev->handle, "_STA", &cfg); + if (err) { + dev_info(dev, "Could not evaluate ACPI _STA\n"); + goto err_acpi_init; + } + + err = eval_int(priv->adev->handle, "VPC0._CFG", &cfg); + if (err) { + dev_info(dev, "Could not evaluate ACPI _CFG\n"); + goto err_acpi_init; + } + dev_info(dev, "ACPI CFG: %lu\n", cfg); + } else { + dev_info(dev, "Skipping ACPI _STA check"); + } + + return 0; + +err_acpi_init: + return err; +} + +/* ============================= */ +/* White Keyboard Backlight */ +/* ============================ */ +// In style of ideapad-driver and with code modified from ideapad-driver. + +static enum led_brightness +legion_kbd_bl_led_cdev_brightness_get(struct led_classdev *led_cdev) +{ + struct legion_private *priv = + container_of(led_cdev, struct legion_private, kbd_bl.led); + + return legion_kbd_bl_brightness_get(priv); +} + +static int legion_kbd_bl_led_cdev_brightness_set(struct led_classdev *led_cdev, + enum led_brightness brightness) +{ + struct legion_private *priv = + container_of(led_cdev, struct legion_private, kbd_bl.led); + + return legion_kbd_bl_brightness_set(priv, brightness); +} + +static int legion_kbd_bl_init(struct legion_private *priv) +{ + int brightness, err; + + if (WARN_ON(priv->kbd_bl.initialized)) { + pr_info("Keyboard backlight already initialized\n"); + return -EEXIST; + } + + if (priv->conf->access_method_keyboard == ACCESS_METHOD_NO_ACCESS) { + pr_info("Keyboard backlight handling disabled by this driver\n"); + return -ENODEV; + } + + brightness = legion_kbd_bl_brightness_get(priv); + if (brightness < 0) { + pr_info("Error reading keyboard brightness\n"); + return brightness; + } + + priv->kbd_bl.last_brightness = brightness; + + // will be renamed to "platform::kbd_backlight_1" if it exists already + priv->kbd_bl.led.name = "platform::" LED_FUNCTION_KBD_BACKLIGHT; + priv->kbd_bl.led.max_brightness = 2; + priv->kbd_bl.led.brightness_get = legion_kbd_bl_led_cdev_brightness_get; + priv->kbd_bl.led.brightness_set_blocking = + legion_kbd_bl_led_cdev_brightness_set; + priv->kbd_bl.led.flags = LED_BRIGHT_HW_CHANGED; + + err = led_classdev_register(&priv->platform_device->dev, + &priv->kbd_bl.led); + if (err) + return err; + + priv->kbd_bl.initialized = true; + + return 0; +} + +/** + * Deinit keyboard backlight. + * + * Can also be called if init was not successful. + * + */ +static void legion_kbd_bl_exit(struct legion_private *priv) +{ + if (!priv->kbd_bl.initialized) + return; + + priv->kbd_bl.initialized = false; + + led_classdev_unregister(&priv->kbd_bl.led); +} + +/* ============================= */ +/* Additional light driver */ +/* ============================ */ + +static enum led_brightness +legion_wmi_cdev_brightness_get(struct led_classdev *led_cdev) +{ + struct legion_private *priv = + container_of(led_cdev, struct legion_private, kbd_bl.led); + struct light *light_ins = container_of(led_cdev, struct light, led); + + return legion_wmi_light_get(priv, light_ins->light_id, + light_ins->lower_limit, + light_ins->upper_limit); +} + +static int legion_wmi_cdev_brightness_set(struct led_classdev *led_cdev, + enum led_brightness brightness) +{ + struct legion_private *priv = + container_of(led_cdev, struct legion_private, kbd_bl.led); + struct light *light_ins = container_of(led_cdev, struct light, led); + + return legion_wmi_light_set(priv, light_ins->light_id, + light_ins->lower_limit, + light_ins->upper_limit, brightness); +} + +static int legion_light_init(struct legion_private *priv, + struct light *light_ins, u8 light_id, + u8 lower_limit, u8 upper_limit, const char *name) +{ + int brightness, err; + + if (WARN_ON(light_ins->initialized)) { + pr_info("Light already initialized for light: %u\n", + light_ins->light_id); + return -EEXIST; + } + + light_ins->light_id = light_id; + light_ins->lower_limit = lower_limit; + light_ins->upper_limit = upper_limit; + + brightness = legion_wmi_light_get(priv, light_ins->light_id, + light_ins->lower_limit, + light_ins->upper_limit); + if (brightness < 0) { + pr_info("Error reading brightness for light: %u\n", + light_ins->light_id); + return brightness; + } + + light_ins->led.name = name; + light_ins->led.max_brightness = + light_ins->upper_limit - light_ins->lower_limit; + light_ins->led.brightness_get = legion_wmi_cdev_brightness_get; + light_ins->led.brightness_set_blocking = legion_wmi_cdev_brightness_set; + light_ins->led.flags = LED_BRIGHT_HW_CHANGED; + + err = led_classdev_register(&priv->platform_device->dev, + &light_ins->led); + if (err) + return err; + + light_ins->initialized = true; + + return 0; +} + +/** + * Deinit light. + * + * Can also be called if init was not successful. + * + */ +static void legion_light_exit(struct legion_private *priv, + struct light *light_ins) +{ + if (!light_ins->initialized) + return; + + light_ins->initialized = false; + + led_classdev_unregister(&light_ins->led); +} + +/* ============================= */ +/* Platform driver */ +/* ============================ */ + +static int legion_add(struct platform_device *pdev) +{ + struct legion_private *priv; + const struct dmi_system_id *dmi_sys; + int err; + u16 ec_read_id; + bool skip_ec_id_check; + bool is_ec_id_valid; + bool is_denied = true; + bool is_allowed = false; + bool do_load_by_list = false; + bool do_load = false; + //struct legion_private *priv = dev_get_drvdata(&pdev->dev); + dev_info(&pdev->dev, "legion_laptop platform driver probing\n"); + + dev_info( + &pdev->dev, + "Read identifying information: DMI_SYS_VENDOR: %s; DMI_PRODUCT_NAME: %s; DMI_BIOS_VERSION:%s\n", + dmi_get_system_info(DMI_SYS_VENDOR), + dmi_get_system_info(DMI_PRODUCT_NAME), + dmi_get_system_info(DMI_BIOS_VERSION)); + + // TODO: allocate? + priv = &_priv; + priv->platform_device = pdev; + err = legion_shared_init(priv); + if (err) { + dev_info(&pdev->dev, "legion_laptop is forced to load.\n"); + goto err_legion_shared_init; + } + dev_set_drvdata(&pdev->dev, priv); + + // TODO: remove + pr_info("Read identifying information: DMI_SYS_VENDOR: %s; DMI_PRODUCT_NAME: %s; DMI_BIOS_VERSION:%s\n", + dmi_get_system_info(DMI_SYS_VENDOR), + dmi_get_system_info(DMI_PRODUCT_NAME), + dmi_get_system_info(DMI_BIOS_VERSION)); + + dmi_sys = dmi_first_match(optimistic_allowlist); + is_allowed = dmi_sys != NULL; + is_denied = dmi_check_system(denylist); + do_load_by_list = is_allowed && !is_denied; + do_load = do_load_by_list || force; + + dev_info( + &pdev->dev, + "is_denied: %d; is_allowed: %d; do_load_by_list: %d; do_load: %d\n", + is_denied, is_allowed, do_load_by_list, do_load); + + if (!(do_load)) { + dev_info( + &pdev->dev, + "Module not usable for this laptop because it is not in allowlist. Notify the maintainer if you want to add your device or force load with param force.\n"); + err = -ENOMEM; + goto err_model_mismtach; + } + + if (force) + dev_info(&pdev->dev, "legion_laptop is forced to load.\n"); + + if (!do_load_by_list && do_load) { + dev_info( + &pdev->dev, + "legion_laptop is forced to load and would otherwise not be loaded\n"); + } + + // if forced and no module found, use config for first model + if (dmi_sys == NULL) + dmi_sys = &optimistic_allowlist[0]; + dev_info(&pdev->dev, "Using configuration for system: %s\n", + dmi_sys->ident); + + priv->conf = dmi_sys->driver_data; + + err = acpi_init(priv, ACPI_COMPANION(&pdev->dev)); + if (err) { + dev_info(&pdev->dev, "Could not init ACPI access: %d\n", err); + goto err_acpi_init; + } + + // TODO: remove; only used for reverse engineering + pr_info("Creating RAM access to embedded controller\n"); + err = ecram_memoryio_init(&priv->ec_memoryio, + priv->conf->ramio_physical_start, 0, + priv->conf->ramio_size); + if (err) { + dev_info( + &pdev->dev, + "Could not init RAM access to embedded controller: %d\n", + err); + goto err_ecram_memoryio_init; + } + + err = ecram_init(&priv->ecram, priv->conf->memoryio_physical_ec_start, + priv->conf->memoryio_size); + if (err) { + dev_info(&pdev->dev, + "Could not init access to embedded controller: %d\n", + err); + goto err_ecram_init; + } + + ec_read_id = read_ec_id(&priv->ecram, priv->conf); + dev_info(&pdev->dev, "Read embedded controller ID 0x%x\n", ec_read_id); + skip_ec_id_check = force || (!priv->conf->check_embedded_controller_id); + is_ec_id_valid = skip_ec_id_check || + (ec_read_id == priv->conf->embedded_controller_id); + if (!is_ec_id_valid) { + err = -ENOMEM; + dev_info(&pdev->dev, "Expected EC chip id 0x%x but read 0x%x\n", + priv->conf->embedded_controller_id, ec_read_id); + goto err_ecram_id; + } + if (skip_ec_id_check) { + dev_info(&pdev->dev, + "Skipped checking embedded controller id\n"); + } + + dev_info(&pdev->dev, "Creating debugfs interface\n"); + legion_debugfs_init(priv); + + pr_info("Creating sysfs interface\n"); + err = legion_sysfs_init(priv); + if (err) { + dev_info(&pdev->dev, "Failed to create sysfs interface: %d\n", + err); + goto err_sysfs_init; + } + + pr_info("Creating hwmon interface"); + err = legion_hwmon_init(priv); + if (err) { + dev_info(&pdev->dev, "Failed to create hwmon interface: %d\n", + err); + goto err_hwmon_init; + } + + pr_info("Creating platform profile support\n"); + err = legion_platform_profile_init(priv); + if (err) { + dev_info(&pdev->dev, "Failed to create platform profile: %d\n", + err); + goto err_platform_profile; + } + + pr_info("Init WMI driver support\n"); + err = legion_wmi_init(); + if (err) { + dev_info(&pdev->dev, "Failed to init WMI driver: %d\n", err); + goto err_wmi; + } + + pr_info("Init keyboard backlight LED driver\n"); + err = legion_kbd_bl_init(priv); + if (err) { + dev_info( + &pdev->dev, + "Failed to init keyboard backlight LED driver. Skipping ...\n"); + } + + pr_info("Init Y-Logo LED driver\n"); + err = legion_light_init(priv, &priv->ylogo_light, LIGHT_ID_YLOGO, 0, 1, + "platform::ylogo"); + if (err) { + dev_info(&pdev->dev, + "Failed to init Y-Logo LED driver. Skipping ...\n"); + } + + pr_info("Init IO-Port LED driver\n"); + err = legion_light_init(priv, &priv->iport_light, LIGHT_ID_IOPORT, 1, 2, + "platform::ioport"); + if (err) { + dev_info(&pdev->dev, + "Failed to init IO-Port LED driver. Skipping ...\n"); + } + + dev_info(&pdev->dev, "legion_laptop loaded for this device\n"); + return 0; + + // TODO: remove eventually + legion_light_exit(priv, &priv->iport_light); + legion_light_exit(priv, &priv->ylogo_light); + legion_kbd_bl_exit(priv); + legion_wmi_exit(); +err_wmi: + legion_platform_profile_exit(priv); +err_platform_profile: + legion_hwmon_exit(priv); +err_hwmon_init: + legion_sysfs_exit(priv); +err_sysfs_init: + legion_debugfs_exit(priv); +err_ecram_id: + ecram_exit(&priv->ecram); +err_ecram_init: + ecram_memoryio_exit(&priv->ec_memoryio); +err_ecram_memoryio_init: +err_acpi_init: + legion_shared_exit(priv); +err_legion_shared_init: +err_model_mismtach: + dev_info(&pdev->dev, "legion_laptop not loaded for this device\n"); + return err; +} + +static int legion_remove(struct platform_device *pdev) +{ + struct legion_private *priv = dev_get_drvdata(&pdev->dev); + + mutex_lock(&legion_shared_mutex); + priv->loaded = false; + mutex_unlock(&legion_shared_mutex); + + legion_light_exit(priv, &priv->iport_light); + legion_light_exit(priv, &priv->ylogo_light); + legion_kbd_bl_exit(priv); + // first unregister wmi, so toggling powermode does not + // generate events anymore that even might be delayed + legion_wmi_exit(); + legion_platform_profile_exit(priv); + + // toggle power mode to load default setting from embedded controller + // again + toggle_powermode(priv); + + legion_hwmon_exit(priv); + legion_sysfs_exit(priv); + legion_debugfs_exit(priv); + ecram_exit(&priv->ecram); + ecram_memoryio_exit(&priv->ec_memoryio); + legion_shared_exit(priv); + + pr_info("Legion platform unloaded\n"); + return 0; +} + +static int legion_resume(struct platform_device *pdev) +{ + //struct legion_private *priv = dev_get_drvdata(&pdev->dev); + dev_info(&pdev->dev, "Resumed in legion-laptop\n"); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int legion_pm_resume(struct device *dev) +{ + //struct legion_private *priv = dev_get_drvdata(dev); + dev_info(dev, "Resumed PM in legion-laptop\n"); + + return 0; +} +#endif +static SIMPLE_DEV_PM_OPS(legion_pm, NULL, legion_pm_resume); + +// same as ideapad +static const struct acpi_device_id legion_device_ids[] = { + // todo: change to "VPC2004", and also ACPI paths + { "PNP0C09", 0 }, + { "", 0 }, +}; +MODULE_DEVICE_TABLE(acpi, legion_device_ids); + +static struct platform_driver legion_driver = { + .probe = legion_add, + .remove = legion_remove, + .resume = legion_resume, + .driver = { + .name = "legion", + .pm = &legion_pm, + .acpi_match_table = ACPI_PTR(legion_device_ids), + }, +}; + +static int __init legion_init(void) +{ + int err; + + pr_info("Loading legion_laptop\n"); + err = platform_driver_register(&legion_driver); + if (err) { + pr_info("legion_laptop: platform_driver_register failed\n"); + return err; + } + + return 0; +} + +module_init(legion_init); + +static void __exit legion_exit(void) +{ + platform_driver_unregister(&legion_driver); + pr_info("legion_laptop exit\n"); +} + +module_exit(legion_exit); -- 2.43.2