diff options
Diffstat (limited to 'thirdparty/libcurl/include/curl/curl.h')
| -rw-r--r-- | thirdparty/libcurl/include/curl/curl.h | 3103 |
1 files changed, 3103 insertions, 0 deletions
diff --git a/thirdparty/libcurl/include/curl/curl.h b/thirdparty/libcurl/include/curl/curl.h new file mode 100644 index 00000000..7b69ce2d --- /dev/null +++ b/thirdparty/libcurl/include/curl/curl.h @@ -0,0 +1,3103 @@ +#ifndef CURLINC_CURL_H +#define CURLINC_CURL_H +/*************************************************************************** + * _ _ ____ _ + * Project ___| | | | _ \| | + * / __| | | | |_) | | + * | (__| |_| | _ <| |___ + * \___|\___/|_| \_\_____| + * + * Copyright (C) 1998 - 2021, Daniel Stenberg, <daniel@haxx.se>, et al. + * + * This software is licensed as described in the file COPYING, which + * you should have received as part of this distribution. The terms + * are also available at https://curl.se/docs/copyright.html. + * + * You may opt to use, copy, modify, merge, publish, distribute and/or sell + * copies of the Software, and permit persons to whom the Software is + * furnished to do so, under the terms of the COPYING file. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + ***************************************************************************/ + +/* + * If you have libcurl problems, all docs and details are found here: + * https://curl.se/libcurl/ + */ + +#ifdef CURL_NO_OLDIES +#define CURL_STRICTER +#endif + +#include "curlver.h" /* libcurl version defines */ +#include "system.h" /* determine things run-time */ + +/* + * Define CURL_WIN32 when build target is Win32 API + */ + +#if (defined(_WIN32) || defined(__WIN32__) || defined(WIN32)) && \ + !defined(__SYMBIAN32__) +#define CURL_WIN32 +#endif + +#include <stdio.h> +#include <limits.h> + +#if (defined(__FreeBSD__) && (__FreeBSD__ >= 2)) || defined(__MidnightBSD__) +/* Needed for __FreeBSD_version or __MidnightBSD_version symbol definition */ +#include <osreldate.h> +#endif + +/* The include stuff here below is mainly for time_t! */ +#include <sys/types.h> +#include <time.h> + +#if defined(CURL_WIN32) && !defined(_WIN32_WCE) && !defined(__CYGWIN__) +#if !(defined(_WINSOCKAPI_) || defined(_WINSOCK_H) || \ + defined(__LWIP_OPT_H__) || defined(LWIP_HDR_OPT_H)) +/* The check above prevents the winsock2 inclusion if winsock.h already was + included, since they can't co-exist without problems */ +#include <winsock2.h> +#include <ws2tcpip.h> +#endif +#endif + +/* HP-UX systems version 9, 10 and 11 lack sys/select.h and so does oldish + libc5-based Linux systems. Only include it on systems that are known to + require it! */ +#if defined(_AIX) || defined(__NOVELL_LIBC__) || defined(__NetBSD__) || \ + defined(__minix) || defined(__SYMBIAN32__) || defined(__INTEGRITY) || \ + defined(ANDROID) || defined(__ANDROID__) || defined(__OpenBSD__) || \ + defined(__CYGWIN__) || defined(AMIGA) || defined(__NuttX__) || \ + (defined(__FreeBSD_version) && (__FreeBSD_version < 800000)) || \ + (defined(__MidnightBSD_version) && (__MidnightBSD_version < 100000)) || \ + defined(__VXWORKS__) +#include <sys/select.h> +#endif + +#if !defined(CURL_WIN32) && !defined(_WIN32_WCE) +#include <sys/socket.h> +#endif + +#if !defined(CURL_WIN32) && !defined(__WATCOMC__) && !defined(__VXWORKS__) +#include <sys/time.h> +#endif + +#ifdef __BEOS__ +#include <support/SupportDefs.h> +#endif + +/* Compatibility for non-Clang compilers */ +#ifndef __has_declspec_attribute +# define __has_declspec_attribute(x) 0 +#endif + +#ifdef __cplusplus +extern "C" { +#endif + +#if defined(BUILDING_LIBCURL) || defined(CURL_STRICTER) +typedef struct Curl_easy CURL; +typedef struct Curl_share CURLSH; +#else +typedef void CURL; +typedef void CURLSH; +#endif + +/* + * libcurl external API function linkage decorations. + */ + +#ifdef CURL_STATICLIB +# define CURL_EXTERN +#elif defined(CURL_WIN32) || defined(__SYMBIAN32__) || \ + (__has_declspec_attribute(dllexport) && \ + __has_declspec_attribute(dllimport)) +# if defined(BUILDING_LIBCURL) +# define CURL_EXTERN __declspec(dllexport) +# else +# define CURL_EXTERN __declspec(dllimport) +# endif +#elif defined(BUILDING_LIBCURL) && defined(CURL_HIDDEN_SYMBOLS) +# define CURL_EXTERN CURL_EXTERN_SYMBOL +#else +# define CURL_EXTERN +#endif + +#ifndef curl_socket_typedef +/* socket typedef */ +#if defined(CURL_WIN32) && !defined(__LWIP_OPT_H__) && !defined(LWIP_HDR_OPT_H) +typedef SOCKET curl_socket_t; +#define CURL_SOCKET_BAD INVALID_SOCKET +#else +typedef int curl_socket_t; +#define CURL_SOCKET_BAD -1 +#endif +#define curl_socket_typedef +#endif /* curl_socket_typedef */ + +/* enum for the different supported SSL backends */ +typedef enum { + CURLSSLBACKEND_NONE = 0, + CURLSSLBACKEND_OPENSSL = 1, + CURLSSLBACKEND_GNUTLS = 2, + CURLSSLBACKEND_NSS = 3, + CURLSSLBACKEND_OBSOLETE4 = 4, /* Was QSOSSL. */ + CURLSSLBACKEND_GSKIT = 5, + CURLSSLBACKEND_POLARSSL = 6, + CURLSSLBACKEND_WOLFSSL = 7, + CURLSSLBACKEND_SCHANNEL = 8, + CURLSSLBACKEND_SECURETRANSPORT = 9, + CURLSSLBACKEND_AXTLS = 10, /* never used since 7.63.0 */ + CURLSSLBACKEND_MBEDTLS = 11, + CURLSSLBACKEND_MESALINK = 12, + CURLSSLBACKEND_BEARSSL = 13, + CURLSSLBACKEND_RUSTLS = 14 +} curl_sslbackend; + +/* aliases for library clones and renames */ +#define CURLSSLBACKEND_LIBRESSL CURLSSLBACKEND_OPENSSL +#define CURLSSLBACKEND_BORINGSSL CURLSSLBACKEND_OPENSSL + +/* deprecated names: */ +#define CURLSSLBACKEND_CYASSL CURLSSLBACKEND_WOLFSSL +#define CURLSSLBACKEND_DARWINSSL CURLSSLBACKEND_SECURETRANSPORT + +struct curl_httppost { + struct curl_httppost *next; /* next entry in the list */ + char *name; /* pointer to allocated name */ + long namelength; /* length of name length */ + char *contents; /* pointer to allocated data contents */ + long contentslength; /* length of contents field, see also + CURL_HTTPPOST_LARGE */ + char *buffer; /* pointer to allocated buffer contents */ + long bufferlength; /* length of buffer field */ + char *contenttype; /* Content-Type */ + struct curl_slist *contentheader; /* list of extra headers for this form */ + struct curl_httppost *more; /* if one field name has more than one + file, this link should link to following + files */ + long flags; /* as defined below */ + +/* specified content is a file name */ +#define CURL_HTTPPOST_FILENAME (1<<0) +/* specified content is a file name */ +#define CURL_HTTPPOST_READFILE (1<<1) +/* name is only stored pointer do not free in formfree */ +#define CURL_HTTPPOST_PTRNAME (1<<2) +/* contents is only stored pointer do not free in formfree */ +#define CURL_HTTPPOST_PTRCONTENTS (1<<3) +/* upload file from buffer */ +#define CURL_HTTPPOST_BUFFER (1<<4) +/* upload file from pointer contents */ +#define CURL_HTTPPOST_PTRBUFFER (1<<5) +/* upload file contents by using the regular read callback to get the data and + pass the given pointer as custom pointer */ +#define CURL_HTTPPOST_CALLBACK (1<<6) +/* use size in 'contentlen', added in 7.46.0 */ +#define CURL_HTTPPOST_LARGE (1<<7) + + char *showfilename; /* The file name to show. If not set, the + actual file name will be used (if this + is a file part) */ + void *userp; /* custom pointer used for + HTTPPOST_CALLBACK posts */ + curl_off_t contentlen; /* alternative length of contents + field. Used if CURL_HTTPPOST_LARGE is + set. Added in 7.46.0 */ +}; + + +/* This is a return code for the progress callback that, when returned, will + signal libcurl to continue executing the default progress function */ +#define CURL_PROGRESSFUNC_CONTINUE 0x10000001 + +/* This is the CURLOPT_PROGRESSFUNCTION callback prototype. It is now + considered deprecated but was the only choice up until 7.31.0 */ +typedef int (*curl_progress_callback)(void *clientp, + double dltotal, + double dlnow, + double ultotal, + double ulnow); + +/* This is the CURLOPT_XFERINFOFUNCTION callback prototype. It was introduced + in 7.32.0, avoids the use of floating point numbers and provides more + detailed information. */ +typedef int (*curl_xferinfo_callback)(void *clientp, + curl_off_t dltotal, + curl_off_t dlnow, + curl_off_t ultotal, + curl_off_t ulnow); + +#ifndef CURL_MAX_READ_SIZE + /* The maximum receive buffer size configurable via CURLOPT_BUFFERSIZE. */ +#define CURL_MAX_READ_SIZE 524288 +#endif + +#ifndef CURL_MAX_WRITE_SIZE + /* Tests have proven that 20K is a very bad buffer size for uploads on + Windows, while 16K for some odd reason performed a lot better. + We do the ifndef check to allow this value to easier be changed at build + time for those who feel adventurous. The practical minimum is about + 400 bytes since libcurl uses a buffer of this size as a scratch area + (unrelated to network send operations). */ +#define CURL_MAX_WRITE_SIZE 16384 +#endif + +#ifndef CURL_MAX_HTTP_HEADER +/* The only reason to have a max limit for this is to avoid the risk of a bad + server feeding libcurl with a never-ending header that will cause reallocs + infinitely */ +#define CURL_MAX_HTTP_HEADER (100*1024) +#endif + +/* This is a magic return code for the write callback that, when returned, + will signal libcurl to pause receiving on the current transfer. */ +#define CURL_WRITEFUNC_PAUSE 0x10000001 + +typedef size_t (*curl_write_callback)(char *buffer, + size_t size, + size_t nitems, + void *outstream); + +/* This callback will be called when a new resolver request is made */ +typedef int (*curl_resolver_start_callback)(void *resolver_state, + void *reserved, void *userdata); + +/* enumeration of file types */ +typedef enum { + CURLFILETYPE_FILE = 0, + CURLFILETYPE_DIRECTORY, + CURLFILETYPE_SYMLINK, + CURLFILETYPE_DEVICE_BLOCK, + CURLFILETYPE_DEVICE_CHAR, + CURLFILETYPE_NAMEDPIPE, + CURLFILETYPE_SOCKET, + CURLFILETYPE_DOOR, /* is possible only on Sun Solaris now */ + + CURLFILETYPE_UNKNOWN /* should never occur */ +} curlfiletype; + +#define CURLFINFOFLAG_KNOWN_FILENAME (1<<0) +#define CURLFINFOFLAG_KNOWN_FILETYPE (1<<1) +#define CURLFINFOFLAG_KNOWN_TIME (1<<2) +#define CURLFINFOFLAG_KNOWN_PERM (1<<3) +#define CURLFINFOFLAG_KNOWN_UID (1<<4) +#define CURLFINFOFLAG_KNOWN_GID (1<<5) +#define CURLFINFOFLAG_KNOWN_SIZE (1<<6) +#define CURLFINFOFLAG_KNOWN_HLINKCOUNT (1<<7) + +/* Information about a single file, used when doing FTP wildcard matching */ +struct curl_fileinfo { + char *filename; + curlfiletype filetype; + time_t time; /* always zero! */ + unsigned int perm; + int uid; + int gid; + curl_off_t size; + long int hardlinks; + + struct { + /* If some of these fields is not NULL, it is a pointer to b_data. */ + char *time; + char *perm; + char *user; + char *group; + char *target; /* pointer to the target filename of a symlink */ + } strings; + + unsigned int flags; + + /* used internally */ + char *b_data; + size_t b_size; + size_t b_used; +}; + +/* return codes for CURLOPT_CHUNK_BGN_FUNCTION */ +#define CURL_CHUNK_BGN_FUNC_OK 0 +#define CURL_CHUNK_BGN_FUNC_FAIL 1 /* tell the lib to end the task */ +#define CURL_CHUNK_BGN_FUNC_SKIP 2 /* skip this chunk over */ + +/* if splitting of data transfer is enabled, this callback is called before + download of an individual chunk started. Note that parameter "remains" works + only for FTP wildcard downloading (for now), otherwise is not used */ +typedef long (*curl_chunk_bgn_callback)(const void *transfer_info, + void *ptr, + int remains); + +/* return codes for CURLOPT_CHUNK_END_FUNCTION */ +#define CURL_CHUNK_END_FUNC_OK 0 +#define CURL_CHUNK_END_FUNC_FAIL 1 /* tell the lib to end the task */ + +/* If splitting of data transfer is enabled this callback is called after + download of an individual chunk finished. + Note! After this callback was set then it have to be called FOR ALL chunks. + Even if downloading of this chunk was skipped in CHUNK_BGN_FUNC. + This is the reason why we don't need "transfer_info" parameter in this + callback and we are not interested in "remains" parameter too. */ +typedef long (*curl_chunk_end_callback)(void *ptr); + +/* return codes for FNMATCHFUNCTION */ +#define CURL_FNMATCHFUNC_MATCH 0 /* string corresponds to the pattern */ +#define CURL_FNMATCHFUNC_NOMATCH 1 /* pattern doesn't match the string */ +#define CURL_FNMATCHFUNC_FAIL 2 /* an error occurred */ + +/* callback type for wildcard downloading pattern matching. If the + string matches the pattern, return CURL_FNMATCHFUNC_MATCH value, etc. */ +typedef int (*curl_fnmatch_callback)(void *ptr, + const char *pattern, + const char *string); + +/* These are the return codes for the seek callbacks */ +#define CURL_SEEKFUNC_OK 0 +#define CURL_SEEKFUNC_FAIL 1 /* fail the entire transfer */ +#define CURL_SEEKFUNC_CANTSEEK 2 /* tell libcurl seeking can't be done, so + libcurl might try other means instead */ +typedef int (*curl_seek_callback)(void *instream, + curl_off_t offset, + int origin); /* 'whence' */ + +/* This is a return code for the read callback that, when returned, will + signal libcurl to immediately abort the current transfer. */ +#define CURL_READFUNC_ABORT 0x10000000 +/* This is a return code for the read callback that, when returned, will + signal libcurl to pause sending data on the current transfer. */ +#define CURL_READFUNC_PAUSE 0x10000001 + +/* Return code for when the trailing headers' callback has terminated + without any errors*/ +#define CURL_TRAILERFUNC_OK 0 +/* Return code for when was an error in the trailing header's list and we + want to abort the request */ +#define CURL_TRAILERFUNC_ABORT 1 + +typedef size_t (*curl_read_callback)(char *buffer, + size_t size, + size_t nitems, + void *instream); + +typedef int (*curl_trailer_callback)(struct curl_slist **list, + void *userdata); + +typedef enum { + CURLSOCKTYPE_IPCXN, /* socket created for a specific IP connection */ + CURLSOCKTYPE_ACCEPT, /* socket created by accept() call */ + CURLSOCKTYPE_LAST /* never use */ +} curlsocktype; + +/* The return code from the sockopt_callback can signal information back + to libcurl: */ +#define CURL_SOCKOPT_OK 0 +#define CURL_SOCKOPT_ERROR 1 /* causes libcurl to abort and return + CURLE_ABORTED_BY_CALLBACK */ +#define CURL_SOCKOPT_ALREADY_CONNECTED 2 + +typedef int (*curl_sockopt_callback)(void *clientp, + curl_socket_t curlfd, + curlsocktype purpose); + +struct curl_sockaddr { + int family; + int socktype; + int protocol; + unsigned int addrlen; /* addrlen was a socklen_t type before 7.18.0 but it + turned really ugly and painful on the systems that + lack this type */ + struct sockaddr addr; +}; + +typedef curl_socket_t +(*curl_opensocket_callback)(void *clientp, + curlsocktype purpose, + struct curl_sockaddr *address); + +typedef int +(*curl_closesocket_callback)(void *clientp, curl_socket_t item); + +typedef enum { + CURLIOE_OK, /* I/O operation successful */ + CURLIOE_UNKNOWNCMD, /* command was unknown to callback */ + CURLIOE_FAILRESTART, /* failed to restart the read */ + CURLIOE_LAST /* never use */ +} curlioerr; + +typedef enum { + CURLIOCMD_NOP, /* no operation */ + CURLIOCMD_RESTARTREAD, /* restart the read stream from start */ + CURLIOCMD_LAST /* never use */ +} curliocmd; + +typedef curlioerr (*curl_ioctl_callback)(CURL *handle, + int cmd, + void *clientp); + +#ifndef CURL_DID_MEMORY_FUNC_TYPEDEFS +/* + * The following typedef's are signatures of malloc, free, realloc, strdup and + * calloc respectively. Function pointers of these types can be passed to the + * curl_global_init_mem() function to set user defined memory management + * callback routines. + */ +typedef void *(*curl_malloc_callback)(size_t size); +typedef void (*curl_free_callback)(void *ptr); +typedef void *(*curl_realloc_callback)(void *ptr, size_t size); +typedef char *(*curl_strdup_callback)(const char *str); +typedef void *(*curl_calloc_callback)(size_t nmemb, size_t size); + +#define CURL_DID_MEMORY_FUNC_TYPEDEFS +#endif + +/* the kind of data that is passed to information_callback*/ +typedef enum { + CURLINFO_TEXT = 0, + CURLINFO_HEADER_IN, /* 1 */ + CURLINFO_HEADER_OUT, /* 2 */ + CURLINFO_DATA_IN, /* 3 */ + CURLINFO_DATA_OUT, /* 4 */ + CURLINFO_SSL_DATA_IN, /* 5 */ + CURLINFO_SSL_DATA_OUT, /* 6 */ + CURLINFO_END +} curl_infotype; + +typedef int (*curl_debug_callback) + (CURL *handle, /* the handle/transfer this concerns */ + curl_infotype type, /* what kind of data */ + char *data, /* points to the data */ + size_t size, /* size of the data pointed to */ + void *userptr); /* whatever the user please */ + +/* This is the CURLOPT_PREREQFUNCTION callback prototype. */ +typedef int (*curl_prereq_callback)(void *clientp, + char *conn_primary_ip, + char *conn_local_ip, + int conn_primary_port, + int conn_local_port); + +/* Return code for when the pre-request callback has terminated without + any errors */ +#define CURL_PREREQFUNC_OK 0 +/* Return code for when the pre-request callback wants to abort the + request */ +#define CURL_PREREQFUNC_ABORT 1 + +/* All possible error codes from all sorts of curl functions. Future versions + may return other values, stay prepared. + + Always add new return codes last. Never *EVER* remove any. The return + codes must remain the same! + */ + +typedef enum { + CURLE_OK = 0, + CURLE_UNSUPPORTED_PROTOCOL, /* 1 */ + CURLE_FAILED_INIT, /* 2 */ + CURLE_URL_MALFORMAT, /* 3 */ + CURLE_NOT_BUILT_IN, /* 4 - [was obsoleted in August 2007 for + 7.17.0, reused in April 2011 for 7.21.5] */ + CURLE_COULDNT_RESOLVE_PROXY, /* 5 */ + CURLE_COULDNT_RESOLVE_HOST, /* 6 */ + CURLE_COULDNT_CONNECT, /* 7 */ + CURLE_WEIRD_SERVER_REPLY, /* 8 */ + CURLE_REMOTE_ACCESS_DENIED, /* 9 a service was denied by the server + due to lack of access - when login fails + this is not returned. */ + CURLE_FTP_ACCEPT_FAILED, /* 10 - [was obsoleted in April 2006 for + 7.15.4, reused in Dec 2011 for 7.24.0]*/ + CURLE_FTP_WEIRD_PASS_REPLY, /* 11 */ + CURLE_FTP_ACCEPT_TIMEOUT, /* 12 - timeout occurred accepting server + [was obsoleted in August 2007 for 7.17.0, + reused in Dec 2011 for 7.24.0]*/ + CURLE_FTP_WEIRD_PASV_REPLY, /* 13 */ + CURLE_FTP_WEIRD_227_FORMAT, /* 14 */ + CURLE_FTP_CANT_GET_HOST, /* 15 */ + CURLE_HTTP2, /* 16 - A problem in the http2 framing layer. + [was obsoleted in August 2007 for 7.17.0, + reused in July 2014 for 7.38.0] */ + CURLE_FTP_COULDNT_SET_TYPE, /* 17 */ + CURLE_PARTIAL_FILE, /* 18 */ + CURLE_FTP_COULDNT_RETR_FILE, /* 19 */ + CURLE_OBSOLETE20, /* 20 - NOT USED */ + CURLE_QUOTE_ERROR, /* 21 - quote command failure */ + CURLE_HTTP_RETURNED_ERROR, /* 22 */ + CURLE_WRITE_ERROR, /* 23 */ + CURLE_OBSOLETE24, /* 24 - NOT USED */ + CURLE_UPLOAD_FAILED, /* 25 - failed upload "command" */ + CURLE_READ_ERROR, /* 26 - couldn't open/read from file */ + CURLE_OUT_OF_MEMORY, /* 27 */ + /* Note: CURLE_OUT_OF_MEMORY may sometimes indicate a conversion error + instead of a memory allocation error if CURL_DOES_CONVERSIONS + is defined + */ + CURLE_OPERATION_TIMEDOUT, /* 28 - the timeout time was reached */ + CURLE_OBSOLETE29, /* 29 - NOT USED */ + CURLE_FTP_PORT_FAILED, /* 30 - FTP PORT operation failed */ + CURLE_FTP_COULDNT_USE_REST, /* 31 - the REST command failed */ + CURLE_OBSOLETE32, /* 32 - NOT USED */ + CURLE_RANGE_ERROR, /* 33 - RANGE "command" didn't work */ + CURLE_HTTP_POST_ERROR, /* 34 */ + CURLE_SSL_CONNECT_ERROR, /* 35 - wrong when connecting with SSL */ + CURLE_BAD_DOWNLOAD_RESUME, /* 36 - couldn't resume download */ + CURLE_FILE_COULDNT_READ_FILE, /* 37 */ + CURLE_LDAP_CANNOT_BIND, /* 38 */ + CURLE_LDAP_SEARCH_FAILED, /* 39 */ + CURLE_OBSOLETE40, /* 40 - NOT USED */ + CURLE_FUNCTION_NOT_FOUND, /* 41 - NOT USED starting with 7.53.0 */ + CURLE_ABORTED_BY_CALLBACK, /* 42 */ + CURLE_BAD_FUNCTION_ARGUMENT, /* 43 */ + CURLE_OBSOLETE44, /* 44 - NOT USED */ + CURLE_INTERFACE_FAILED, /* 45 - CURLOPT_INTERFACE failed */ + CURLE_OBSOLETE46, /* 46 - NOT USED */ + CURLE_TOO_MANY_REDIRECTS, /* 47 - catch endless re-direct loops */ + CURLE_UNKNOWN_OPTION, /* 48 - User specified an unknown option */ + CURLE_SETOPT_OPTION_SYNTAX, /* 49 - Malformed setopt option */ + CURLE_OBSOLETE50, /* 50 - NOT USED */ + CURLE_OBSOLETE51, /* 51 - NOT USED */ + CURLE_GOT_NOTHING, /* 52 - when this is a specific error */ + CURLE_SSL_ENGINE_NOTFOUND, /* 53 - SSL crypto engine not found */ + CURLE_SSL_ENGINE_SETFAILED, /* 54 - can not set SSL crypto engine as + default */ + CURLE_SEND_ERROR, /* 55 - failed sending network data */ + CURLE_RECV_ERROR, /* 56 - failure in receiving network data */ + CURLE_OBSOLETE57, /* 57 - NOT IN USE */ + CURLE_SSL_CERTPROBLEM, /* 58 - problem with the local certificate */ + CURLE_SSL_CIPHER, /* 59 - couldn't use specified cipher */ + CURLE_PEER_FAILED_VERIFICATION, /* 60 - peer's certificate or fingerprint + wasn't verified fine */ + CURLE_BAD_CONTENT_ENCODING, /* 61 - Unrecognized/bad encoding */ + CURLE_LDAP_INVALID_URL, /* 62 - Invalid LDAP URL */ + CURLE_FILESIZE_EXCEEDED, /* 63 - Maximum file size exceeded */ + CURLE_USE_SSL_FAILED, /* 64 - Requested FTP SSL level failed */ + CURLE_SEND_FAIL_REWIND, /* 65 - Sending the data requires a rewind + that failed */ + CURLE_SSL_ENGINE_INITFAILED, /* 66 - failed to initialise ENGINE */ + CURLE_LOGIN_DENIED, /* 67 - user, password or similar was not + accepted and we failed to login */ + CURLE_TFTP_NOTFOUND, /* 68 - file not found on server */ + CURLE_TFTP_PERM, /* 69 - permission problem on server */ + CURLE_REMOTE_DISK_FULL, /* 70 - out of disk space on server */ + CURLE_TFTP_ILLEGAL, /* 71 - Illegal TFTP operation */ + CURLE_TFTP_UNKNOWNID, /* 72 - Unknown transfer ID */ + CURLE_REMOTE_FILE_EXISTS, /* 73 - File already exists */ + CURLE_TFTP_NOSUCHUSER, /* 74 - No such user */ + CURLE_CONV_FAILED, /* 75 - conversion failed */ + CURLE_CONV_REQD, /* 76 - caller must register conversion + callbacks using curl_easy_setopt options + CURLOPT_CONV_FROM_NETWORK_FUNCTION, + CURLOPT_CONV_TO_NETWORK_FUNCTION, and + CURLOPT_CONV_FROM_UTF8_FUNCTION */ + CURLE_SSL_CACERT_BADFILE, /* 77 - could not load CACERT file, missing + or wrong format */ + CURLE_REMOTE_FILE_NOT_FOUND, /* 78 - remote file not found */ + CURLE_SSH, /* 79 - error from the SSH layer, somewhat + generic so the error message will be of + interest when this has happened */ + + CURLE_SSL_SHUTDOWN_FAILED, /* 80 - Failed to shut down the SSL + connection */ + CURLE_AGAIN, /* 81 - socket is not ready for send/recv, + wait till it's ready and try again (Added + in 7.18.2) */ + CURLE_SSL_CRL_BADFILE, /* 82 - could not load CRL file, missing or + wrong format (Added in 7.19.0) */ + CURLE_SSL_ISSUER_ERROR, /* 83 - Issuer check failed. (Added in + 7.19.0) */ + CURLE_FTP_PRET_FAILED, /* 84 - a PRET command failed */ + CURLE_RTSP_CSEQ_ERROR, /* 85 - mismatch of RTSP CSeq numbers */ + CURLE_RTSP_SESSION_ERROR, /* 86 - mismatch of RTSP Session Ids */ + CURLE_FTP_BAD_FILE_LIST, /* 87 - unable to parse FTP file list */ + CURLE_CHUNK_FAILED, /* 88 - chunk callback reported error */ + CURLE_NO_CONNECTION_AVAILABLE, /* 89 - No connection available, the + session will be queued */ + CURLE_SSL_PINNEDPUBKEYNOTMATCH, /* 90 - specified pinned public key did not + match */ + CURLE_SSL_INVALIDCERTSTATUS, /* 91 - invalid certificate status */ + CURLE_HTTP2_STREAM, /* 92 - stream error in HTTP/2 framing layer + */ + CURLE_RECURSIVE_API_CALL, /* 93 - an api function was called from + inside a callback */ + CURLE_AUTH_ERROR, /* 94 - an authentication function returned an + error */ + CURLE_HTTP3, /* 95 - An HTTP/3 layer problem */ + CURLE_QUIC_CONNECT_ERROR, /* 96 - QUIC connection error */ + CURLE_PROXY, /* 97 - proxy handshake error */ + CURLE_SSL_CLIENTCERT, /* 98 - client-side certificate required */ + CURL_LAST /* never use! */ +} CURLcode; + +#ifndef CURL_NO_OLDIES /* define this to test if your app builds with all + the obsolete stuff removed! */ + +/* Previously obsolete error code re-used in 7.38.0 */ +#define CURLE_OBSOLETE16 CURLE_HTTP2 + +/* Previously obsolete error codes re-used in 7.24.0 */ +#define CURLE_OBSOLETE10 CURLE_FTP_ACCEPT_FAILED +#define CURLE_OBSOLETE12 CURLE_FTP_ACCEPT_TIMEOUT + +/* compatibility with older names */ +#define CURLOPT_ENCODING CURLOPT_ACCEPT_ENCODING +#define CURLE_FTP_WEIRD_SERVER_REPLY CURLE_WEIRD_SERVER_REPLY + +/* The following were added in 7.62.0 */ +#define CURLE_SSL_CACERT CURLE_PEER_FAILED_VERIFICATION + +/* The following were added in 7.21.5, April 2011 */ +#define CURLE_UNKNOWN_TELNET_OPTION CURLE_UNKNOWN_OPTION + +/* Added for 7.78.0 */ +#define CURLE_TELNET_OPTION_SYNTAX CURLE_SETOPT_OPTION_SYNTAX + +/* The following were added in 7.17.1 */ +/* These are scheduled to disappear by 2009 */ +#define CURLE_SSL_PEER_CERTIFICATE CURLE_PEER_FAILED_VERIFICATION + +/* The following were added in 7.17.0 */ +/* These are scheduled to disappear by 2009 */ +#define CURLE_OBSOLETE CURLE_OBSOLETE50 /* no one should be using this! */ +#define CURLE_BAD_PASSWORD_ENTERED CURLE_OBSOLETE46 +#define CURLE_BAD_CALLING_ORDER CURLE_OBSOLETE44 +#define CURLE_FTP_USER_PASSWORD_INCORRECT CURLE_OBSOLETE10 +#define CURLE_FTP_CANT_RECONNECT CURLE_OBSOLETE16 +#define CURLE_FTP_COULDNT_GET_SIZE CURLE_OBSOLETE32 +#define CURLE_FTP_COULDNT_SET_ASCII CURLE_OBSOLETE29 +#define CURLE_FTP_WEIRD_USER_REPLY CURLE_OBSOLETE12 +#define CURLE_FTP_WRITE_ERROR CURLE_OBSOLETE20 +#define CURLE_LIBRARY_NOT_FOUND CURLE_OBSOLETE40 +#define CURLE_MALFORMAT_USER CURLE_OBSOLETE24 +#define CURLE_SHARE_IN_USE CURLE_OBSOLETE57 +#define CURLE_URL_MALFORMAT_USER CURLE_NOT_BUILT_IN + +#define CURLE_FTP_ACCESS_DENIED CURLE_REMOTE_ACCESS_DENIED +#define CURLE_FTP_COULDNT_SET_BINARY CURLE_FTP_COULDNT_SET_TYPE +#define CURLE_FTP_QUOTE_ERROR CURLE_QUOTE_ERROR +#define CURLE_TFTP_DISKFULL CURLE_REMOTE_DISK_FULL +#define CURLE_TFTP_EXISTS CURLE_REMOTE_FILE_EXISTS +#define CURLE_HTTP_RANGE_ERROR CURLE_RANGE_ERROR +#define CURLE_FTP_SSL_FAILED CURLE_USE_SSL_FAILED + +/* The following were added earlier */ + +#define CURLE_OPERATION_TIMEOUTED CURLE_OPERATION_TIMEDOUT + +#define CURLE_HTTP_NOT_FOUND CURLE_HTTP_RETURNED_ERROR +#define CURLE_HTTP_PORT_FAILED CURLE_INTERFACE_FAILED +#define CURLE_FTP_COULDNT_STOR_FILE CURLE_UPLOAD_FAILED + +#define CURLE_FTP_PARTIAL_FILE CURLE_PARTIAL_FILE +#define CURLE_FTP_BAD_DOWNLOAD_RESUME CURLE_BAD_DOWNLOAD_RESUME + +/* This was the error code 50 in 7.7.3 and a few earlier versions, this + is no longer used by libcurl but is instead #defined here only to not + make programs break */ +#define CURLE_ALREADY_COMPLETE 99999 + +/* Provide defines for really old option names */ +#define CURLOPT_FILE CURLOPT_WRITEDATA /* name changed in 7.9.7 */ +#define CURLOPT_INFILE CURLOPT_READDATA /* name changed in 7.9.7 */ +#define CURLOPT_WRITEHEADER CURLOPT_HEADERDATA + +/* Since long deprecated options with no code in the lib that does anything + with them. */ +#define CURLOPT_WRITEINFO CURLOPT_OBSOLETE40 +#define CURLOPT_CLOSEPOLICY CURLOPT_OBSOLETE72 + +#endif /*!CURL_NO_OLDIES*/ + +/* + * Proxy error codes. Returned in CURLINFO_PROXY_ERROR if CURLE_PROXY was + * return for the transfers. + */ +typedef enum { + CURLPX_OK, + CURLPX_BAD_ADDRESS_TYPE, + CURLPX_BAD_VERSION, + CURLPX_CLOSED, + CURLPX_GSSAPI, + CURLPX_GSSAPI_PERMSG, + CURLPX_GSSAPI_PROTECTION, + CURLPX_IDENTD, + CURLPX_IDENTD_DIFFER, + CURLPX_LONG_HOSTNAME, + CURLPX_LONG_PASSWD, + CURLPX_LONG_USER, + CURLPX_NO_AUTH, + CURLPX_RECV_ADDRESS, + CURLPX_RECV_AUTH, + CURLPX_RECV_CONNECT, + CURLPX_RECV_REQACK, + CURLPX_REPLY_ADDRESS_TYPE_NOT_SUPPORTED, + CURLPX_REPLY_COMMAND_NOT_SUPPORTED, + CURLPX_REPLY_CONNECTION_REFUSED, + CURLPX_REPLY_GENERAL_SERVER_FAILURE, + CURLPX_REPLY_HOST_UNREACHABLE, + CURLPX_REPLY_NETWORK_UNREACHABLE, + CURLPX_REPLY_NOT_ALLOWED, + CURLPX_REPLY_TTL_EXPIRED, + CURLPX_REPLY_UNASSIGNED, + CURLPX_REQUEST_FAILED, + CURLPX_RESOLVE_HOST, + CURLPX_SEND_AUTH, + CURLPX_SEND_CONNECT, + CURLPX_SEND_REQUEST, + CURLPX_UNKNOWN_FAIL, + CURLPX_UNKNOWN_MODE, + CURLPX_USER_REJECTED, + CURLPX_LAST /* never use */ +} CURLproxycode; + +/* This prototype applies to all conversion callbacks */ +typedef CURLcode (*curl_conv_callback)(char *buffer, size_t length); + +typedef CURLcode (*curl_ssl_ctx_callback)(CURL *curl, /* easy handle */ + void *ssl_ctx, /* actually an OpenSSL + or WolfSSL SSL_CTX, + or an mbedTLS + mbedtls_ssl_config */ + void *userptr); + +typedef enum { + CURLPROXY_HTTP = 0, /* added in 7.10, new in 7.19.4 default is to use + CONNECT HTTP/1.1 */ + CURLPROXY_HTTP_1_0 = 1, /* added in 7.19.4, force to use CONNECT + HTTP/1.0 */ + CURLPROXY_HTTPS = 2, /* added in 7.52.0 */ + CURLPROXY_SOCKS4 = 4, /* support added in 7.15.2, enum existed already + in 7.10 */ + CURLPROXY_SOCKS5 = 5, /* added in 7.10 */ + CURLPROXY_SOCKS4A = 6, /* added in 7.18.0 */ + CURLPROXY_SOCKS5_HOSTNAME = 7 /* Use the SOCKS5 protocol but pass along the + host name rather than the IP address. added + in 7.18.0 */ +} curl_proxytype; /* this enum was added in 7.10 */ + +/* + * Bitmasks for CURLOPT_HTTPAUTH and CURLOPT_PROXYAUTH options: + * + * CURLAUTH_NONE - No HTTP authentication + * CURLAUTH_BASIC - HTTP Basic authentication (default) + * CURLAUTH_DIGEST - HTTP Digest authentication + * CURLAUTH_NEGOTIATE - HTTP Negotiate (SPNEGO) authentication + * CURLAUTH_GSSNEGOTIATE - Alias for CURLAUTH_NEGOTIATE (deprecated) + * CURLAUTH_NTLM - HTTP NTLM authentication + * CURLAUTH_DIGEST_IE - HTTP Digest authentication with IE flavour + * CURLAUTH_NTLM_WB - HTTP NTLM authentication delegated to winbind helper + * CURLAUTH_BEARER - HTTP Bearer token authentication + * CURLAUTH_ONLY - Use together with a single other type to force no + * authentication or just that single type + * CURLAUTH_ANY - All fine types set + * CURLAUTH_ANYSAFE - All fine types except Basic + */ + +#define CURLAUTH_NONE ((unsigned long)0) +#define CURLAUTH_BASIC (((unsigned long)1)<<0) +#define CURLAUTH_DIGEST (((unsigned long)1)<<1) +#define CURLAUTH_NEGOTIATE (((unsigned long)1)<<2) +/* Deprecated since the advent of CURLAUTH_NEGOTIATE */ +#define CURLAUTH_GSSNEGOTIATE CURLAUTH_NEGOTIATE +/* Used for CURLOPT_SOCKS5_AUTH to stay terminologically correct */ +#define CURLAUTH_GSSAPI CURLAUTH_NEGOTIATE +#define CURLAUTH_NTLM (((unsigned long)1)<<3) +#define CURLAUTH_DIGEST_IE (((unsigned long)1)<<4) +#define CURLAUTH_NTLM_WB (((unsigned long)1)<<5) +#define CURLAUTH_BEARER (((unsigned long)1)<<6) +#define CURLAUTH_AWS_SIGV4 (((unsigned long)1)<<7) +#define CURLAUTH_ONLY (((unsigned long)1)<<31) +#define CURLAUTH_ANY (~CURLAUTH_DIGEST_IE) +#define CURLAUTH_ANYSAFE (~(CURLAUTH_BASIC|CURLAUTH_DIGEST_IE)) + +#define CURLSSH_AUTH_ANY ~0 /* all types supported by the server */ +#define CURLSSH_AUTH_NONE 0 /* none allowed, silly but complete */ +#define CURLSSH_AUTH_PUBLICKEY (1<<0) /* public/private key files */ +#define CURLSSH_AUTH_PASSWORD (1<<1) /* password */ +#define CURLSSH_AUTH_HOST (1<<2) /* host key files */ +#define CURLSSH_AUTH_KEYBOARD (1<<3) /* keyboard interactive */ +#define CURLSSH_AUTH_AGENT (1<<4) /* agent (ssh-agent, pageant...) */ +#define CURLSSH_AUTH_GSSAPI (1<<5) /* gssapi (kerberos, ...) */ +#define CURLSSH_AUTH_DEFAULT CURLSSH_AUTH_ANY + +#define CURLGSSAPI_DELEGATION_NONE 0 /* no delegation (default) */ +#define CURLGSSAPI_DELEGATION_POLICY_FLAG (1<<0) /* if permitted by policy */ +#define CURLGSSAPI_DELEGATION_FLAG (1<<1) /* delegate always */ + +#define CURL_ERROR_SIZE 256 + +enum curl_khtype { + CURLKHTYPE_UNKNOWN, + CURLKHTYPE_RSA1, + CURLKHTYPE_RSA, + CURLKHTYPE_DSS, + CURLKHTYPE_ECDSA, + CURLKHTYPE_ED25519 +}; + +struct curl_khkey { + const char *key; /* points to a null-terminated string encoded with base64 + if len is zero, otherwise to the "raw" data */ + size_t len; + enum curl_khtype keytype; +}; + +/* this is the set of return values expected from the curl_sshkeycallback + callback */ +enum curl_khstat { + CURLKHSTAT_FINE_ADD_TO_FILE, + CURLKHSTAT_FINE, + CURLKHSTAT_REJECT, /* reject the connection, return an error */ + CURLKHSTAT_DEFER, /* do not accept it, but we can't answer right now so + this causes a CURLE_DEFER error but otherwise the + connection will be left intact etc */ + CURLKHSTAT_FINE_REPLACE, /* accept and replace the wrong key*/ + CURLKHSTAT_LAST /* not for use, only a marker for last-in-list */ +}; + +/* this is the set of status codes pass in to the callback */ +enum curl_khmatch { + CURLKHMATCH_OK, /* match */ + CURLKHMATCH_MISMATCH, /* host found, key mismatch! */ + CURLKHMATCH_MISSING, /* no matching host/key found */ + CURLKHMATCH_LAST /* not for use, only a marker for last-in-list */ +}; + +typedef int + (*curl_sshkeycallback) (CURL *easy, /* easy handle */ + const struct curl_khkey *knownkey, /* known */ + const struct curl_khkey *foundkey, /* found */ + enum curl_khmatch, /* libcurl's view on the keys */ + void *clientp); /* custom pointer passed from app */ + +/* parameter for the CURLOPT_USE_SSL option */ +typedef enum { + CURLUSESSL_NONE, /* do not attempt to use SSL */ + CURLUSESSL_TRY, /* try using SSL, proceed anyway otherwise */ + CURLUSESSL_CONTROL, /* SSL for the control connection or fail */ + CURLUSESSL_ALL, /* SSL for all communication or fail */ + CURLUSESSL_LAST /* not an option, never use */ +} curl_usessl; + +/* Definition of bits for the CURLOPT_SSL_OPTIONS argument: */ + +/* - ALLOW_BEAST tells libcurl to allow the BEAST SSL vulnerability in the + name of improving interoperability with older servers. Some SSL libraries + have introduced work-arounds for this flaw but those work-arounds sometimes + make the SSL communication fail. To regain functionality with those broken + servers, a user can this way allow the vulnerability back. */ +#define CURLSSLOPT_ALLOW_BEAST (1<<0) + +/* - NO_REVOKE tells libcurl to disable certificate revocation checks for those + SSL backends where such behavior is present. */ +#define CURLSSLOPT_NO_REVOKE (1<<1) + +/* - NO_PARTIALCHAIN tells libcurl to *NOT* accept a partial certificate chain + if possible. The OpenSSL backend has this ability. */ +#define CURLSSLOPT_NO_PARTIALCHAIN (1<<2) + +/* - REVOKE_BEST_EFFORT tells libcurl to ignore certificate revocation offline + checks and ignore missing revocation list for those SSL backends where such + behavior is present. */ +#define CURLSSLOPT_REVOKE_BEST_EFFORT (1<<3) + +/* - CURLSSLOPT_NATIVE_CA tells libcurl to use standard certificate store of + operating system. Currently implemented under MS-Windows. */ +#define CURLSSLOPT_NATIVE_CA (1<<4) + +/* - CURLSSLOPT_AUTO_CLIENT_CERT tells libcurl to automatically locate and use + a client certificate for authentication. (Schannel) */ +#define CURLSSLOPT_AUTO_CLIENT_CERT (1<<5) + +/* The default connection attempt delay in milliseconds for happy eyeballs. + CURLOPT_HAPPY_EYEBALLS_TIMEOUT_MS.3 and happy-eyeballs-timeout-ms.d document + this value, keep them in sync. */ +#define CURL_HET_DEFAULT 200L + +/* The default connection upkeep interval in milliseconds. */ +#define CURL_UPKEEP_INTERVAL_DEFAULT 60000L + +#ifndef CURL_NO_OLDIES /* define this to test if your app builds with all + the obsolete stuff removed! */ + +/* Backwards compatibility with older names */ +/* These are scheduled to disappear by 2009 */ + +#define CURLFTPSSL_NONE CURLUSESSL_NONE +#define CURLFTPSSL_TRY CURLUSESSL_TRY +#define CURLFTPSSL_CONTROL CURLUSESSL_CONTROL +#define CURLFTPSSL_ALL CURLUSESSL_ALL +#define CURLFTPSSL_LAST CURLUSESSL_LAST +#define curl_ftpssl curl_usessl +#endif /*!CURL_NO_OLDIES*/ + +/* parameter for the CURLOPT_FTP_SSL_CCC option */ +typedef enum { + CURLFTPSSL_CCC_NONE, /* do not send CCC */ + CURLFTPSSL_CCC_PASSIVE, /* Let the server initiate the shutdown */ + CURLFTPSSL_CCC_ACTIVE, /* Initiate the shutdown */ + CURLFTPSSL_CCC_LAST /* not an option, never use */ +} curl_ftpccc; + +/* parameter for the CURLOPT_FTPSSLAUTH option */ +typedef enum { + CURLFTPAUTH_DEFAULT, /* let libcurl decide */ + CURLFTPAUTH_SSL, /* use "AUTH SSL" */ + CURLFTPAUTH_TLS, /* use "AUTH TLS" */ + CURLFTPAUTH_LAST /* not an option, never use */ +} curl_ftpauth; + +/* parameter for the CURLOPT_FTP_CREATE_MISSING_DIRS option */ +typedef enum { + CURLFTP_CREATE_DIR_NONE, /* do NOT create missing dirs! */ + CURLFTP_CREATE_DIR, /* (FTP/SFTP) if CWD fails, try MKD and then CWD + again if MKD succeeded, for SFTP this does + similar magic */ + CURLFTP_CREATE_DIR_RETRY, /* (FTP only) if CWD fails, try MKD and then CWD + again even if MKD failed! */ + CURLFTP_CREATE_DIR_LAST /* not an option, never use */ +} curl_ftpcreatedir; + +/* parameter for the CURLOPT_FTP_FILEMETHOD option */ +typedef enum { + CURLFTPMETHOD_DEFAULT, /* let libcurl pick */ + CURLFTPMETHOD_MULTICWD, /* single CWD operation for each path part */ + CURLFTPMETHOD_NOCWD, /* no CWD at all */ + CURLFTPMETHOD_SINGLECWD, /* one CWD to full dir, then work on file */ + CURLFTPMETHOD_LAST /* not an option, never use */ +} curl_ftpmethod; + +/* bitmask defines for CURLOPT_HEADEROPT */ +#define CURLHEADER_UNIFIED 0 +#define CURLHEADER_SEPARATE (1<<0) + +/* CURLALTSVC_* are bits for the CURLOPT_ALTSVC_CTRL option */ +#define CURLALTSVC_READONLYFILE (1<<2) +#define CURLALTSVC_H1 (1<<3) +#define CURLALTSVC_H2 (1<<4) +#define CURLALTSVC_H3 (1<<5) + + +struct curl_hstsentry { + char *name; + size_t namelen; + unsigned int includeSubDomains:1; + char expire[18]; /* YYYYMMDD HH:MM:SS [null-terminated] */ +}; + +struct curl_index { + size_t index; /* the provided entry's "index" or count */ + size_t total; /* total number of entries to save */ +}; + +typedef enum { + CURLSTS_OK, + CURLSTS_DONE, + CURLSTS_FAIL +} CURLSTScode; + +typedef CURLSTScode (*curl_hstsread_callback)(CURL *easy, + struct curl_hstsentry *e, + void *userp); +typedef CURLSTScode (*curl_hstswrite_callback)(CURL *easy, + struct curl_hstsentry *e, + struct curl_index *i, + void *userp); + +/* CURLHSTS_* are bits for the CURLOPT_HSTS option */ +#define CURLHSTS_ENABLE (long)(1<<0) +#define CURLHSTS_READONLYFILE (long)(1<<1) + +/* CURLPROTO_ defines are for the CURLOPT_*PROTOCOLS options */ +#define CURLPROTO_HTTP (1<<0) +#define CURLPROTO_HTTPS (1<<1) +#define CURLPROTO_FTP (1<<2) +#define CURLPROTO_FTPS (1<<3) +#define CURLPROTO_SCP (1<<4) +#define CURLPROTO_SFTP (1<<5) +#define CURLPROTO_TELNET (1<<6) +#define CURLPROTO_LDAP (1<<7) +#define CURLPROTO_LDAPS (1<<8) +#define CURLPROTO_DICT (1<<9) +#define CURLPROTO_FILE (1<<10) +#define CURLPROTO_TFTP (1<<11) +#define CURLPROTO_IMAP (1<<12) +#define CURLPROTO_IMAPS (1<<13) +#define CURLPROTO_POP3 (1<<14) +#define CURLPROTO_POP3S (1<<15) +#define CURLPROTO_SMTP (1<<16) +#define CURLPROTO_SMTPS (1<<17) +#define CURLPROTO_RTSP (1<<18) +#define CURLPROTO_RTMP (1<<19) +#define CURLPROTO_RTMPT (1<<20) +#define CURLPROTO_RTMPE (1<<21) +#define CURLPROTO_RTMPTE (1<<22) +#define CURLPROTO_RTMPS (1<<23) +#define CURLPROTO_RTMPTS (1<<24) +#define CURLPROTO_GOPHER (1<<25) +#define CURLPROTO_SMB (1<<26) +#define CURLPROTO_SMBS (1<<27) +#define CURLPROTO_MQTT (1<<28) +#define CURLPROTO_GOPHERS (1<<29) +#define CURLPROTO_ALL (~0) /* enable everything */ + +/* long may be 32 or 64 bits, but we should never depend on anything else + but 32 */ +#define CURLOPTTYPE_LONG 0 +#define CURLOPTTYPE_OBJECTPOINT 10000 +#define CURLOPTTYPE_FUNCTIONPOINT 20000 +#define CURLOPTTYPE_OFF_T 30000 +#define CURLOPTTYPE_BLOB 40000 + +/* *STRINGPOINT is an alias for OBJECTPOINT to allow tools to extract the + string options from the header file */ + + +#define CURLOPT(na,t,nu) na = t + nu + +/* CURLOPT aliases that make no run-time difference */ + +/* 'char *' argument to a string with a trailing zero */ +#define CURLOPTTYPE_STRINGPOINT CURLOPTTYPE_OBJECTPOINT + +/* 'struct curl_slist *' argument */ +#define CURLOPTTYPE_SLISTPOINT CURLOPTTYPE_OBJECTPOINT + +/* 'void *' argument passed untouched to callback */ +#define CURLOPTTYPE_CBPOINT CURLOPTTYPE_OBJECTPOINT + +/* 'long' argument with a set of values/bitmask */ +#define CURLOPTTYPE_VALUES CURLOPTTYPE_LONG + +/* + * All CURLOPT_* values. + */ + +typedef enum { + /* This is the FILE * or void * the regular output should be written to. */ + CURLOPT(CURLOPT_WRITEDATA, CURLOPTTYPE_CBPOINT, 1), + + /* The full URL to get/put */ + CURLOPT(CURLOPT_URL, CURLOPTTYPE_STRINGPOINT, 2), + + /* Port number to connect to, if other than default. */ + CURLOPT(CURLOPT_PORT, CURLOPTTYPE_LONG, 3), + + /* Name of proxy to use. */ + CURLOPT(CURLOPT_PROXY, CURLOPTTYPE_STRINGPOINT, 4), + + /* "user:password;options" to use when fetching. */ + CURLOPT(CURLOPT_USERPWD, CURLOPTTYPE_STRINGPOINT, 5), + + /* "user:password" to use with proxy. */ + CURLOPT(CURLOPT_PROXYUSERPWD, CURLOPTTYPE_STRINGPOINT, 6), + + /* Range to get, specified as an ASCII string. */ + CURLOPT(CURLOPT_RANGE, CURLOPTTYPE_STRINGPOINT, 7), + + /* not used */ + + /* Specified file stream to upload from (use as input): */ + CURLOPT(CURLOPT_READDATA, CURLOPTTYPE_CBPOINT, 9), + + /* Buffer to receive error messages in, must be at least CURL_ERROR_SIZE + * bytes big. */ + CURLOPT(CURLOPT_ERRORBUFFER, CURLOPTTYPE_OBJECTPOINT, 10), + + /* Function that will be called to store the output (instead of fwrite). The + * parameters will use fwrite() syntax, make sure to follow them. */ + CURLOPT(CURLOPT_WRITEFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 11), + + /* Function that will be called to read the input (instead of fread). The + * parameters will use fread() syntax, make sure to follow them. */ + CURLOPT(CURLOPT_READFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 12), + + /* Time-out the read operation after this amount of seconds */ + CURLOPT(CURLOPT_TIMEOUT, CURLOPTTYPE_LONG, 13), + + /* If the CURLOPT_INFILE is used, this can be used to inform libcurl about + * how large the file being sent really is. That allows better error + * checking and better verifies that the upload was successful. -1 means + * unknown size. + * + * For large file support, there is also a _LARGE version of the key + * which takes an off_t type, allowing platforms with larger off_t + * sizes to handle larger files. See below for INFILESIZE_LARGE. + */ + CURLOPT(CURLOPT_INFILESIZE, CURLOPTTYPE_LONG, 14), + + /* POST static input fields. */ + CURLOPT(CURLOPT_POSTFIELDS, CURLOPTTYPE_OBJECTPOINT, 15), + + /* Set the referrer page (needed by some CGIs) */ + CURLOPT(CURLOPT_REFERER, CURLOPTTYPE_STRINGPOINT, 16), + + /* Set the FTP PORT string (interface name, named or numerical IP address) + Use i.e '-' to use default address. */ + CURLOPT(CURLOPT_FTPPORT, CURLOPTTYPE_STRINGPOINT, 17), + + /* Set the User-Agent string (examined by some CGIs) */ + CURLOPT(CURLOPT_USERAGENT, CURLOPTTYPE_STRINGPOINT, 18), + + /* If the download receives less than "low speed limit" bytes/second + * during "low speed time" seconds, the operations is aborted. + * You could i.e if you have a pretty high speed connection, abort if + * it is less than 2000 bytes/sec during 20 seconds. + */ + + /* Set the "low speed limit" */ + CURLOPT(CURLOPT_LOW_SPEED_LIMIT, CURLOPTTYPE_LONG, 19), + + /* Set the "low speed time" */ + CURLOPT(CURLOPT_LOW_SPEED_TIME, CURLOPTTYPE_LONG, 20), + + /* Set the continuation offset. + * + * Note there is also a _LARGE version of this key which uses + * off_t types, allowing for large file offsets on platforms which + * use larger-than-32-bit off_t's. Look below for RESUME_FROM_LARGE. + */ + CURLOPT(CURLOPT_RESUME_FROM, CURLOPTTYPE_LONG, 21), + + /* Set cookie in request: */ + CURLOPT(CURLOPT_COOKIE, CURLOPTTYPE_STRINGPOINT, 22), + + /* This points to a linked list of headers, struct curl_slist kind. This + list is also used for RTSP (in spite of its name) */ + CURLOPT(CURLOPT_HTTPHEADER, CURLOPTTYPE_SLISTPOINT, 23), + + /* This points to a linked list of post entries, struct curl_httppost */ + CURLOPT(CURLOPT_HTTPPOST, CURLOPTTYPE_OBJECTPOINT, 24), + + /* name of the file keeping your private SSL-certificate */ + CURLOPT(CURLOPT_SSLCERT, CURLOPTTYPE_STRINGPOINT, 25), + + /* password for the SSL or SSH private key */ + CURLOPT(CURLOPT_KEYPASSWD, CURLOPTTYPE_STRINGPOINT, 26), + + /* send TYPE parameter? */ + CURLOPT(CURLOPT_CRLF, CURLOPTTYPE_LONG, 27), + + /* send linked-list of QUOTE commands */ + CURLOPT(CURLOPT_QUOTE, CURLOPTTYPE_SLISTPOINT, 28), + + /* send FILE * or void * to store headers to, if you use a callback it + is simply passed to the callback unmodified */ + CURLOPT(CURLOPT_HEADERDATA, CURLOPTTYPE_CBPOINT, 29), + + /* point to a file to read the initial cookies from, also enables + "cookie awareness" */ + CURLOPT(CURLOPT_COOKIEFILE, CURLOPTTYPE_STRINGPOINT, 31), + + /* What version to specifically try to use. + See CURL_SSLVERSION defines below. */ + CURLOPT(CURLOPT_SSLVERSION, CURLOPTTYPE_VALUES, 32), + + /* What kind of HTTP time condition to use, see defines */ + CURLOPT(CURLOPT_TIMECONDITION, CURLOPTTYPE_VALUES, 33), + + /* Time to use with the above condition. Specified in number of seconds + since 1 Jan 1970 */ + CURLOPT(CURLOPT_TIMEVALUE, CURLOPTTYPE_LONG, 34), + + /* 35 = OBSOLETE */ + + /* Custom request, for customizing the get command like + HTTP: DELETE, TRACE and others + FTP: to use a different list command + */ + CURLOPT(CURLOPT_CUSTOMREQUEST, CURLOPTTYPE_STRINGPOINT, 36), + + /* FILE handle to use instead of stderr */ + CURLOPT(CURLOPT_STDERR, CURLOPTTYPE_OBJECTPOINT, 37), + + /* 38 is not used */ + + /* send linked-list of post-transfer QUOTE commands */ + CURLOPT(CURLOPT_POSTQUOTE, CURLOPTTYPE_SLISTPOINT, 39), + + /* OBSOLETE, do not use! */ + CURLOPT(CURLOPT_OBSOLETE40, CURLOPTTYPE_OBJECTPOINT, 40), + + /* talk a lot */ + CURLOPT(CURLOPT_VERBOSE, CURLOPTTYPE_LONG, 41), + + /* throw the header out too */ + CURLOPT(CURLOPT_HEADER, CURLOPTTYPE_LONG, 42), + + /* shut off the progress meter */ + CURLOPT(CURLOPT_NOPROGRESS, CURLOPTTYPE_LONG, 43), + + /* use HEAD to get http document */ + CURLOPT(CURLOPT_NOBODY, CURLOPTTYPE_LONG, 44), + + /* no output on http error codes >= 400 */ + CURLOPT(CURLOPT_FAILONERROR, CURLOPTTYPE_LONG, 45), + + /* this is an upload */ + CURLOPT(CURLOPT_UPLOAD, CURLOPTTYPE_LONG, 46), + + /* HTTP POST method */ + CURLOPT(CURLOPT_POST, CURLOPTTYPE_LONG, 47), + + /* bare names when listing directories */ + CURLOPT(CURLOPT_DIRLISTONLY, CURLOPTTYPE_LONG, 48), + + /* Append instead of overwrite on upload! */ + CURLOPT(CURLOPT_APPEND, CURLOPTTYPE_LONG, 50), + + /* Specify whether to read the user+password from the .netrc or the URL. + * This must be one of the CURL_NETRC_* enums below. */ + CURLOPT(CURLOPT_NETRC, CURLOPTTYPE_VALUES, 51), + + /* use Location: Luke! */ + CURLOPT(CURLOPT_FOLLOWLOCATION, CURLOPTTYPE_LONG, 52), + + /* transfer data in text/ASCII format */ + CURLOPT(CURLOPT_TRANSFERTEXT, CURLOPTTYPE_LONG, 53), + + /* HTTP PUT */ + CURLOPT(CURLOPT_PUT, CURLOPTTYPE_LONG, 54), + + /* 55 = OBSOLETE */ + + /* DEPRECATED + * Function that will be called instead of the internal progress display + * function. This function should be defined as the curl_progress_callback + * prototype defines. */ + CURLOPT(CURLOPT_PROGRESSFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 56), + + /* Data passed to the CURLOPT_PROGRESSFUNCTION and CURLOPT_XFERINFOFUNCTION + callbacks */ + CURLOPT(CURLOPT_XFERINFODATA, CURLOPTTYPE_CBPOINT, 57), +#define CURLOPT_PROGRESSDATA CURLOPT_XFERINFODATA + + /* We want the referrer field set automatically when following locations */ + CURLOPT(CURLOPT_AUTOREFERER, CURLOPTTYPE_LONG, 58), + + /* Port of the proxy, can be set in the proxy string as well with: + "[host]:[port]" */ + CURLOPT(CURLOPT_PROXYPORT, CURLOPTTYPE_LONG, 59), + + /* size of the POST input data, if strlen() is not good to use */ + CURLOPT(CURLOPT_POSTFIELDSIZE, CURLOPTTYPE_LONG, 60), + + /* tunnel non-http operations through a HTTP proxy */ + CURLOPT(CURLOPT_HTTPPROXYTUNNEL, CURLOPTTYPE_LONG, 61), + + /* Set the interface string to use as outgoing network interface */ + CURLOPT(CURLOPT_INTERFACE, CURLOPTTYPE_STRINGPOINT, 62), + + /* Set the krb4/5 security level, this also enables krb4/5 awareness. This + * is a string, 'clear', 'safe', 'confidential' or 'private'. If the string + * is set but doesn't match one of these, 'private' will be used. */ + CURLOPT(CURLOPT_KRBLEVEL, CURLOPTTYPE_STRINGPOINT, 63), + + /* Set if we should verify the peer in ssl handshake, set 1 to verify. */ + CURLOPT(CURLOPT_SSL_VERIFYPEER, CURLOPTTYPE_LONG, 64), + + /* The CApath or CAfile used to validate the peer certificate + this option is used only if SSL_VERIFYPEER is true */ + CURLOPT(CURLOPT_CAINFO, CURLOPTTYPE_STRINGPOINT, 65), + + /* 66 = OBSOLETE */ + /* 67 = OBSOLETE */ + + /* Maximum number of http redirects to follow */ + CURLOPT(CURLOPT_MAXREDIRS, CURLOPTTYPE_LONG, 68), + + /* Pass a long set to 1 to get the date of the requested document (if + possible)! Pass a zero to shut it off. */ + CURLOPT(CURLOPT_FILETIME, CURLOPTTYPE_LONG, 69), + + /* This points to a linked list of telnet options */ + CURLOPT(CURLOPT_TELNETOPTIONS, CURLOPTTYPE_SLISTPOINT, 70), + + /* Max amount of cached alive connections */ + CURLOPT(CURLOPT_MAXCONNECTS, CURLOPTTYPE_LONG, 71), + + /* OBSOLETE, do not use! */ + CURLOPT(CURLOPT_OBSOLETE72, CURLOPTTYPE_LONG, 72), + + /* 73 = OBSOLETE */ + + /* Set to explicitly use a new connection for the upcoming transfer. + Do not use this unless you're absolutely sure of this, as it makes the + operation slower and is less friendly for the network. */ + CURLOPT(CURLOPT_FRESH_CONNECT, CURLOPTTYPE_LONG, 74), + + /* Set to explicitly forbid the upcoming transfer's connection to be re-used + when done. Do not use this unless you're absolutely sure of this, as it + makes the operation slower and is less friendly for the network. */ + CURLOPT(CURLOPT_FORBID_REUSE, CURLOPTTYPE_LONG, 75), + + /* Set to a file name that contains random data for libcurl to use to + seed the random engine when doing SSL connects. */ + CURLOPT(CURLOPT_RANDOM_FILE, CURLOPTTYPE_STRINGPOINT, 76), + + /* Set to the Entropy Gathering Daemon socket pathname */ + CURLOPT(CURLOPT_EGDSOCKET, CURLOPTTYPE_STRINGPOINT, 77), + + /* Time-out connect operations after this amount of seconds, if connects are + OK within this time, then fine... This only aborts the connect phase. */ + CURLOPT(CURLOPT_CONNECTTIMEOUT, CURLOPTTYPE_LONG, 78), + + /* Function that will be called to store headers (instead of fwrite). The + * parameters will use fwrite() syntax, make sure to follow them. */ + CURLOPT(CURLOPT_HEADERFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 79), + + /* Set this to force the HTTP request to get back to GET. Only really usable + if POST, PUT or a custom request have been used first. + */ + CURLOPT(CURLOPT_HTTPGET, CURLOPTTYPE_LONG, 80), + + /* Set if we should verify the Common name from the peer certificate in ssl + * handshake, set 1 to check existence, 2 to ensure that it matches the + * provided hostname. */ + CURLOPT(CURLOPT_SSL_VERIFYHOST, CURLOPTTYPE_LONG, 81), + + /* Specify which file name to write all known cookies in after completed + operation. Set file name to "-" (dash) to make it go to stdout. */ + CURLOPT(CURLOPT_COOKIEJAR, CURLOPTTYPE_STRINGPOINT, 82), + + /* Specify which SSL ciphers to use */ + CURLOPT(CURLOPT_SSL_CIPHER_LIST, CURLOPTTYPE_STRINGPOINT, 83), + + /* Specify which HTTP version to use! This must be set to one of the + CURL_HTTP_VERSION* enums set below. */ + CURLOPT(CURLOPT_HTTP_VERSION, CURLOPTTYPE_VALUES, 84), + + /* Specifically switch on or off the FTP engine's use of the EPSV command. By + default, that one will always be attempted before the more traditional + PASV command. */ + CURLOPT(CURLOPT_FTP_USE_EPSV, CURLOPTTYPE_LONG, 85), + + /* type of the file keeping your SSL-certificate ("DER", "PEM", "ENG") */ + CURLOPT(CURLOPT_SSLCERTTYPE, CURLOPTTYPE_STRINGPOINT, 86), + + /* name of the file keeping your private SSL-key */ + CURLOPT(CURLOPT_SSLKEY, CURLOPTTYPE_STRINGPOINT, 87), + + /* type of the file keeping your private SSL-key ("DER", "PEM", "ENG") */ + CURLOPT(CURLOPT_SSLKEYTYPE, CURLOPTTYPE_STRINGPOINT, 88), + + /* crypto engine for the SSL-sub system */ + CURLOPT(CURLOPT_SSLENGINE, CURLOPTTYPE_STRINGPOINT, 89), + + /* set the crypto engine for the SSL-sub system as default + the param has no meaning... + */ + CURLOPT(CURLOPT_SSLENGINE_DEFAULT, CURLOPTTYPE_LONG, 90), + + /* Non-zero value means to use the global dns cache */ + /* DEPRECATED, do not use! */ + CURLOPT(CURLOPT_DNS_USE_GLOBAL_CACHE, CURLOPTTYPE_LONG, 91), + + /* DNS cache timeout */ + CURLOPT(CURLOPT_DNS_CACHE_TIMEOUT, CURLOPTTYPE_LONG, 92), + + /* send linked-list of pre-transfer QUOTE commands */ + CURLOPT(CURLOPT_PREQUOTE, CURLOPTTYPE_SLISTPOINT, 93), + + /* set the debug function */ + CURLOPT(CURLOPT_DEBUGFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 94), + + /* set the data for the debug function */ + CURLOPT(CURLOPT_DEBUGDATA, CURLOPTTYPE_CBPOINT, 95), + + /* mark this as start of a cookie session */ + CURLOPT(CURLOPT_COOKIESESSION, CURLOPTTYPE_LONG, 96), + + /* The CApath directory used to validate the peer certificate + this option is used only if SSL_VERIFYPEER is true */ + CURLOPT(CURLOPT_CAPATH, CURLOPTTYPE_STRINGPOINT, 97), + + /* Instruct libcurl to use a smaller receive buffer */ + CURLOPT(CURLOPT_BUFFERSIZE, CURLOPTTYPE_LONG, 98), + + /* Instruct libcurl to not use any signal/alarm handlers, even when using + timeouts. This option is useful for multi-threaded applications. + See libcurl-the-guide for more background information. */ + CURLOPT(CURLOPT_NOSIGNAL, CURLOPTTYPE_LONG, 99), + + /* Provide a CURLShare for mutexing non-ts data */ + CURLOPT(CURLOPT_SHARE, CURLOPTTYPE_OBJECTPOINT, 100), + + /* indicates type of proxy. accepted values are CURLPROXY_HTTP (default), + CURLPROXY_HTTPS, CURLPROXY_SOCKS4, CURLPROXY_SOCKS4A and + CURLPROXY_SOCKS5. */ + CURLOPT(CURLOPT_PROXYTYPE, CURLOPTTYPE_VALUES, 101), + + /* Set the Accept-Encoding string. Use this to tell a server you would like + the response to be compressed. Before 7.21.6, this was known as + CURLOPT_ENCODING */ + CURLOPT(CURLOPT_ACCEPT_ENCODING, CURLOPTTYPE_STRINGPOINT, 102), + + /* Set pointer to private data */ + CURLOPT(CURLOPT_PRIVATE, CURLOPTTYPE_OBJECTPOINT, 103), + + /* Set aliases for HTTP 200 in the HTTP Response header */ + CURLOPT(CURLOPT_HTTP200ALIASES, CURLOPTTYPE_SLISTPOINT, 104), + + /* Continue to send authentication (user+password) when following locations, + even when hostname changed. This can potentially send off the name + and password to whatever host the server decides. */ + CURLOPT(CURLOPT_UNRESTRICTED_AUTH, CURLOPTTYPE_LONG, 105), + + /* Specifically switch on or off the FTP engine's use of the EPRT command ( + it also disables the LPRT attempt). By default, those ones will always be + attempted before the good old traditional PORT command. */ + CURLOPT(CURLOPT_FTP_USE_EPRT, CURLOPTTYPE_LONG, 106), + + /* Set this to a bitmask value to enable the particular authentications + methods you like. Use this in combination with CURLOPT_USERPWD. + Note that setting multiple bits may cause extra network round-trips. */ + CURLOPT(CURLOPT_HTTPAUTH, CURLOPTTYPE_VALUES, 107), + + /* Set the ssl context callback function, currently only for OpenSSL or + WolfSSL ssl_ctx, or mbedTLS mbedtls_ssl_config in the second argument. + The function must match the curl_ssl_ctx_callback prototype. */ + CURLOPT(CURLOPT_SSL_CTX_FUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 108), + + /* Set the userdata for the ssl context callback function's third + argument */ + CURLOPT(CURLOPT_SSL_CTX_DATA, CURLOPTTYPE_CBPOINT, 109), + + /* FTP Option that causes missing dirs to be created on the remote server. + In 7.19.4 we introduced the convenience enums for this option using the + CURLFTP_CREATE_DIR prefix. + */ + CURLOPT(CURLOPT_FTP_CREATE_MISSING_DIRS, CURLOPTTYPE_LONG, 110), + + /* Set this to a bitmask value to enable the particular authentications + methods you like. Use this in combination with CURLOPT_PROXYUSERPWD. + Note that setting multiple bits may cause extra network round-trips. */ + CURLOPT(CURLOPT_PROXYAUTH, CURLOPTTYPE_VALUES, 111), + + /* FTP option that changes the timeout, in seconds, associated with + getting a response. This is different from transfer timeout time and + essentially places a demand on the FTP server to acknowledge commands + in a timely manner. */ + CURLOPT(CURLOPT_FTP_RESPONSE_TIMEOUT, CURLOPTTYPE_LONG, 112), +#define CURLOPT_SERVER_RESPONSE_TIMEOUT CURLOPT_FTP_RESPONSE_TIMEOUT + + /* Set this option to one of the CURL_IPRESOLVE_* defines (see below) to + tell libcurl to use those IP versions only. This only has effect on + systems with support for more than one, i.e IPv4 _and_ IPv6. */ + CURLOPT(CURLOPT_IPRESOLVE, CURLOPTTYPE_VALUES, 113), + + /* Set this option to limit the size of a file that will be downloaded from + an HTTP or FTP server. + + Note there is also _LARGE version which adds large file support for + platforms which have larger off_t sizes. See MAXFILESIZE_LARGE below. */ + CURLOPT(CURLOPT_MAXFILESIZE, CURLOPTTYPE_LONG, 114), + + /* See the comment for INFILESIZE above, but in short, specifies + * the size of the file being uploaded. -1 means unknown. + */ + CURLOPT(CURLOPT_INFILESIZE_LARGE, CURLOPTTYPE_OFF_T, 115), + + /* Sets the continuation offset. There is also a CURLOPTTYPE_LONG version + * of this; look above for RESUME_FROM. + */ + CURLOPT(CURLOPT_RESUME_FROM_LARGE, CURLOPTTYPE_OFF_T, 116), + + /* Sets the maximum size of data that will be downloaded from + * an HTTP or FTP server. See MAXFILESIZE above for the LONG version. + */ + CURLOPT(CURLOPT_MAXFILESIZE_LARGE, CURLOPTTYPE_OFF_T, 117), + + /* Set this option to the file name of your .netrc file you want libcurl + to parse (using the CURLOPT_NETRC option). If not set, libcurl will do + a poor attempt to find the user's home directory and check for a .netrc + file in there. */ + CURLOPT(CURLOPT_NETRC_FILE, CURLOPTTYPE_STRINGPOINT, 118), + + /* Enable SSL/TLS for FTP, pick one of: + CURLUSESSL_TRY - try using SSL, proceed anyway otherwise + CURLUSESSL_CONTROL - SSL for the control connection or fail + CURLUSESSL_ALL - SSL for all communication or fail + */ + CURLOPT(CURLOPT_USE_SSL, CURLOPTTYPE_VALUES, 119), + + /* The _LARGE version of the standard POSTFIELDSIZE option */ + CURLOPT(CURLOPT_POSTFIELDSIZE_LARGE, CURLOPTTYPE_OFF_T, 120), + + /* Enable/disable the TCP Nagle algorithm */ + CURLOPT(CURLOPT_TCP_NODELAY, CURLOPTTYPE_LONG, 121), + + /* 122 OBSOLETE, used in 7.12.3. Gone in 7.13.0 */ + /* 123 OBSOLETE. Gone in 7.16.0 */ + /* 124 OBSOLETE, used in 7.12.3. Gone in 7.13.0 */ + /* 125 OBSOLETE, used in 7.12.3. Gone in 7.13.0 */ + /* 126 OBSOLETE, used in 7.12.3. Gone in 7.13.0 */ + /* 127 OBSOLETE. Gone in 7.16.0 */ + /* 128 OBSOLETE. Gone in 7.16.0 */ + + /* When FTP over SSL/TLS is selected (with CURLOPT_USE_SSL), this option + can be used to change libcurl's default action which is to first try + "AUTH SSL" and then "AUTH TLS" in this order, and proceed when a OK + response has been received. + + Available parameters are: + CURLFTPAUTH_DEFAULT - let libcurl decide + CURLFTPAUTH_SSL - try "AUTH SSL" first, then TLS + CURLFTPAUTH_TLS - try "AUTH TLS" first, then SSL + */ + CURLOPT(CURLOPT_FTPSSLAUTH, CURLOPTTYPE_VALUES, 129), + + CURLOPT(CURLOPT_IOCTLFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 130), + CURLOPT(CURLOPT_IOCTLDATA, CURLOPTTYPE_CBPOINT, 131), + + /* 132 OBSOLETE. Gone in 7.16.0 */ + /* 133 OBSOLETE. Gone in 7.16.0 */ + + /* null-terminated string for pass on to the FTP server when asked for + "account" info */ + CURLOPT(CURLOPT_FTP_ACCOUNT, CURLOPTTYPE_STRINGPOINT, 134), + + /* feed cookie into cookie engine */ + CURLOPT(CURLOPT_COOKIELIST, CURLOPTTYPE_STRINGPOINT, 135), + + /* ignore Content-Length */ + CURLOPT(CURLOPT_IGNORE_CONTENT_LENGTH, CURLOPTTYPE_LONG, 136), + + /* Set to non-zero to skip the IP address received in a 227 PASV FTP server + response. Typically used for FTP-SSL purposes but is not restricted to + that. libcurl will then instead use the same IP address it used for the + control connection. */ + CURLOPT(CURLOPT_FTP_SKIP_PASV_IP, CURLOPTTYPE_LONG, 137), + + /* Select "file method" to use when doing FTP, see the curl_ftpmethod + above. */ + CURLOPT(CURLOPT_FTP_FILEMETHOD, CURLOPTTYPE_VALUES, 138), + + /* Local port number to bind the socket to */ + CURLOPT(CURLOPT_LOCALPORT, CURLOPTTYPE_LONG, 139), + + /* Number of ports to try, including the first one set with LOCALPORT. + Thus, setting it to 1 will make no additional attempts but the first. + */ + CURLOPT(CURLOPT_LOCALPORTRANGE, CURLOPTTYPE_LONG, 140), + + /* no transfer, set up connection and let application use the socket by + extracting it with CURLINFO_LASTSOCKET */ + CURLOPT(CURLOPT_CONNECT_ONLY, CURLOPTTYPE_LONG, 141), + + /* Function that will be called to convert from the + network encoding (instead of using the iconv calls in libcurl) */ + CURLOPT(CURLOPT_CONV_FROM_NETWORK_FUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 142), + + /* Function that will be called to convert to the + network encoding (instead of using the iconv calls in libcurl) */ + CURLOPT(CURLOPT_CONV_TO_NETWORK_FUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 143), + + /* Function that will be called to convert from UTF8 + (instead of using the iconv calls in libcurl) + Note that this is used only for SSL certificate processing */ + CURLOPT(CURLOPT_CONV_FROM_UTF8_FUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 144), + + /* if the connection proceeds too quickly then need to slow it down */ + /* limit-rate: maximum number of bytes per second to send or receive */ + CURLOPT(CURLOPT_MAX_SEND_SPEED_LARGE, CURLOPTTYPE_OFF_T, 145), + CURLOPT(CURLOPT_MAX_RECV_SPEED_LARGE, CURLOPTTYPE_OFF_T, 146), + + /* Pointer to command string to send if USER/PASS fails. */ + CURLOPT(CURLOPT_FTP_ALTERNATIVE_TO_USER, CURLOPTTYPE_STRINGPOINT, 147), + + /* callback function for setting socket options */ + CURLOPT(CURLOPT_SOCKOPTFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 148), + CURLOPT(CURLOPT_SOCKOPTDATA, CURLOPTTYPE_CBPOINT, 149), + + /* set to 0 to disable session ID re-use for this transfer, default is + enabled (== 1) */ + CURLOPT(CURLOPT_SSL_SESSIONID_CACHE, CURLOPTTYPE_LONG, 150), + + /* allowed SSH authentication methods */ + CURLOPT(CURLOPT_SSH_AUTH_TYPES, CURLOPTTYPE_VALUES, 151), + + /* Used by scp/sftp to do public/private key authentication */ + CURLOPT(CURLOPT_SSH_PUBLIC_KEYFILE, CURLOPTTYPE_STRINGPOINT, 152), + CURLOPT(CURLOPT_SSH_PRIVATE_KEYFILE, CURLOPTTYPE_STRINGPOINT, 153), + + /* Send CCC (Clear Command Channel) after authentication */ + CURLOPT(CURLOPT_FTP_SSL_CCC, CURLOPTTYPE_LONG, 154), + + /* Same as TIMEOUT and CONNECTTIMEOUT, but with ms resolution */ + CURLOPT(CURLOPT_TIMEOUT_MS, CURLOPTTYPE_LONG, 155), + CURLOPT(CURLOPT_CONNECTTIMEOUT_MS, CURLOPTTYPE_LONG, 156), + + /* set to zero to disable the libcurl's decoding and thus pass the raw body + data to the application even when it is encoded/compressed */ + CURLOPT(CURLOPT_HTTP_TRANSFER_DECODING, CURLOPTTYPE_LONG, 157), + CURLOPT(CURLOPT_HTTP_CONTENT_DECODING, CURLOPTTYPE_LONG, 158), + + /* Permission used when creating new files and directories on the remote + server for protocols that support it, SFTP/SCP/FILE */ + CURLOPT(CURLOPT_NEW_FILE_PERMS, CURLOPTTYPE_LONG, 159), + CURLOPT(CURLOPT_NEW_DIRECTORY_PERMS, CURLOPTTYPE_LONG, 160), + + /* Set the behavior of POST when redirecting. Values must be set to one + of CURL_REDIR* defines below. This used to be called CURLOPT_POST301 */ + CURLOPT(CURLOPT_POSTREDIR, CURLOPTTYPE_VALUES, 161), + + /* used by scp/sftp to verify the host's public key */ + CURLOPT(CURLOPT_SSH_HOST_PUBLIC_KEY_MD5, CURLOPTTYPE_STRINGPOINT, 162), + + /* Callback function for opening socket (instead of socket(2)). Optionally, + callback is able change the address or refuse to connect returning + CURL_SOCKET_BAD. The callback should have type + curl_opensocket_callback */ + CURLOPT(CURLOPT_OPENSOCKETFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 163), + CURLOPT(CURLOPT_OPENSOCKETDATA, CURLOPTTYPE_CBPOINT, 164), + + /* POST volatile input fields. */ + CURLOPT(CURLOPT_COPYPOSTFIELDS, CURLOPTTYPE_OBJECTPOINT, 165), + + /* set transfer mode (;type=<a|i>) when doing FTP via an HTTP proxy */ + CURLOPT(CURLOPT_PROXY_TRANSFER_MODE, CURLOPTTYPE_LONG, 166), + + /* Callback function for seeking in the input stream */ + CURLOPT(CURLOPT_SEEKFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 167), + CURLOPT(CURLOPT_SEEKDATA, CURLOPTTYPE_CBPOINT, 168), + + /* CRL file */ + CURLOPT(CURLOPT_CRLFILE, CURLOPTTYPE_STRINGPOINT, 169), + + /* Issuer certificate */ + CURLOPT(CURLOPT_ISSUERCERT, CURLOPTTYPE_STRINGPOINT, 170), + + /* (IPv6) Address scope */ + CURLOPT(CURLOPT_ADDRESS_SCOPE, CURLOPTTYPE_LONG, 171), + + /* Collect certificate chain info and allow it to get retrievable with + CURLINFO_CERTINFO after the transfer is complete. */ + CURLOPT(CURLOPT_CERTINFO, CURLOPTTYPE_LONG, 172), + + /* "name" and "pwd" to use when fetching. */ + CURLOPT(CURLOPT_USERNAME, CURLOPTTYPE_STRINGPOINT, 173), + CURLOPT(CURLOPT_PASSWORD, CURLOPTTYPE_STRINGPOINT, 174), + + /* "name" and "pwd" to use with Proxy when fetching. */ + CURLOPT(CURLOPT_PROXYUSERNAME, CURLOPTTYPE_STRINGPOINT, 175), + CURLOPT(CURLOPT_PROXYPASSWORD, CURLOPTTYPE_STRINGPOINT, 176), + + /* Comma separated list of hostnames defining no-proxy zones. These should + match both hostnames directly, and hostnames within a domain. For + example, local.com will match local.com and www.local.com, but NOT + notlocal.com or www.notlocal.com. For compatibility with other + implementations of this, .local.com will be considered to be the same as + local.com. A single * is the only valid wildcard, and effectively + disables the use of proxy. */ + CURLOPT(CURLOPT_NOPROXY, CURLOPTTYPE_STRINGPOINT, 177), + + /* block size for TFTP transfers */ + CURLOPT(CURLOPT_TFTP_BLKSIZE, CURLOPTTYPE_LONG, 178), + + /* Socks Service */ + /* DEPRECATED, do not use! */ + CURLOPT(CURLOPT_SOCKS5_GSSAPI_SERVICE, CURLOPTTYPE_STRINGPOINT, 179), + + /* Socks Service */ + CURLOPT(CURLOPT_SOCKS5_GSSAPI_NEC, CURLOPTTYPE_LONG, 180), + + /* set the bitmask for the protocols that are allowed to be used for the + transfer, which thus helps the app which takes URLs from users or other + external inputs and want to restrict what protocol(s) to deal + with. Defaults to CURLPROTO_ALL. */ + CURLOPT(CURLOPT_PROTOCOLS, CURLOPTTYPE_LONG, 181), + + /* set the bitmask for the protocols that libcurl is allowed to follow to, + as a subset of the CURLOPT_PROTOCOLS ones. That means the protocol needs + to be set in both bitmasks to be allowed to get redirected to. */ + CURLOPT(CURLOPT_REDIR_PROTOCOLS, CURLOPTTYPE_LONG, 182), + + /* set the SSH knownhost file name to use */ + CURLOPT(CURLOPT_SSH_KNOWNHOSTS, CURLOPTTYPE_STRINGPOINT, 183), + + /* set the SSH host key callback, must point to a curl_sshkeycallback + function */ + CURLOPT(CURLOPT_SSH_KEYFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 184), + + /* set the SSH host key callback custom pointer */ + CURLOPT(CURLOPT_SSH_KEYDATA, CURLOPTTYPE_CBPOINT, 185), + + /* set the SMTP mail originator */ + CURLOPT(CURLOPT_MAIL_FROM, CURLOPTTYPE_STRINGPOINT, 186), + + /* set the list of SMTP mail receiver(s) */ + CURLOPT(CURLOPT_MAIL_RCPT, CURLOPTTYPE_SLISTPOINT, 187), + + /* FTP: send PRET before PASV */ + CURLOPT(CURLOPT_FTP_USE_PRET, CURLOPTTYPE_LONG, 188), + + /* RTSP request method (OPTIONS, SETUP, PLAY, etc...) */ + CURLOPT(CURLOPT_RTSP_REQUEST, CURLOPTTYPE_VALUES, 189), + + /* The RTSP session identifier */ + CURLOPT(CURLOPT_RTSP_SESSION_ID, CURLOPTTYPE_STRINGPOINT, 190), + + /* The RTSP stream URI */ + CURLOPT(CURLOPT_RTSP_STREAM_URI, CURLOPTTYPE_STRINGPOINT, 191), + + /* The Transport: header to use in RTSP requests */ + CURLOPT(CURLOPT_RTSP_TRANSPORT, CURLOPTTYPE_STRINGPOINT, 192), + + /* Manually initialize the client RTSP CSeq for this handle */ + CURLOPT(CURLOPT_RTSP_CLIENT_CSEQ, CURLOPTTYPE_LONG, 193), + + /* Manually initialize the server RTSP CSeq for this handle */ + CURLOPT(CURLOPT_RTSP_SERVER_CSEQ, CURLOPTTYPE_LONG, 194), + + /* The stream to pass to INTERLEAVEFUNCTION. */ + CURLOPT(CURLOPT_INTERLEAVEDATA, CURLOPTTYPE_CBPOINT, 195), + + /* Let the application define a custom write method for RTP data */ + CURLOPT(CURLOPT_INTERLEAVEFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 196), + + /* Turn on wildcard matching */ + CURLOPT(CURLOPT_WILDCARDMATCH, CURLOPTTYPE_LONG, 197), + + /* Directory matching callback called before downloading of an + individual file (chunk) started */ + CURLOPT(CURLOPT_CHUNK_BGN_FUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 198), + + /* Directory matching callback called after the file (chunk) + was downloaded, or skipped */ + CURLOPT(CURLOPT_CHUNK_END_FUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 199), + + /* Change match (fnmatch-like) callback for wildcard matching */ + CURLOPT(CURLOPT_FNMATCH_FUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 200), + + /* Let the application define custom chunk data pointer */ + CURLOPT(CURLOPT_CHUNK_DATA, CURLOPTTYPE_CBPOINT, 201), + + /* FNMATCH_FUNCTION user pointer */ + CURLOPT(CURLOPT_FNMATCH_DATA, CURLOPTTYPE_CBPOINT, 202), + + /* send linked-list of name:port:address sets */ + CURLOPT(CURLOPT_RESOLVE, CURLOPTTYPE_SLISTPOINT, 203), + + /* Set a username for authenticated TLS */ + CURLOPT(CURLOPT_TLSAUTH_USERNAME, CURLOPTTYPE_STRINGPOINT, 204), + + /* Set a password for authenticated TLS */ + CURLOPT(CURLOPT_TLSAUTH_PASSWORD, CURLOPTTYPE_STRINGPOINT, 205), + + /* Set authentication type for authenticated TLS */ + CURLOPT(CURLOPT_TLSAUTH_TYPE, CURLOPTTYPE_STRINGPOINT, 206), + + /* Set to 1 to enable the "TE:" header in HTTP requests to ask for + compressed transfer-encoded responses. Set to 0 to disable the use of TE: + in outgoing requests. The current default is 0, but it might change in a + future libcurl release. + + libcurl will ask for the compressed methods it knows of, and if that + isn't any, it will not ask for transfer-encoding at all even if this + option is set to 1. + + */ + CURLOPT(CURLOPT_TRANSFER_ENCODING, CURLOPTTYPE_LONG, 207), + + /* Callback function for closing socket (instead of close(2)). The callback + should have type curl_closesocket_callback */ + CURLOPT(CURLOPT_CLOSESOCKETFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 208), + CURLOPT(CURLOPT_CLOSESOCKETDATA, CURLOPTTYPE_CBPOINT, 209), + + /* allow GSSAPI credential delegation */ + CURLOPT(CURLOPT_GSSAPI_DELEGATION, CURLOPTTYPE_VALUES, 210), + + /* Set the name servers to use for DNS resolution */ + CURLOPT(CURLOPT_DNS_SERVERS, CURLOPTTYPE_STRINGPOINT, 211), + + /* Time-out accept operations (currently for FTP only) after this amount + of milliseconds. */ + CURLOPT(CURLOPT_ACCEPTTIMEOUT_MS, CURLOPTTYPE_LONG, 212), + + /* Set TCP keepalive */ + CURLOPT(CURLOPT_TCP_KEEPALIVE, CURLOPTTYPE_LONG, 213), + + /* non-universal keepalive knobs (Linux, AIX, HP-UX, more) */ + CURLOPT(CURLOPT_TCP_KEEPIDLE, CURLOPTTYPE_LONG, 214), + CURLOPT(CURLOPT_TCP_KEEPINTVL, CURLOPTTYPE_LONG, 215), + + /* Enable/disable specific SSL features with a bitmask, see CURLSSLOPT_* */ + CURLOPT(CURLOPT_SSL_OPTIONS, CURLOPTTYPE_VALUES, 216), + + /* Set the SMTP auth originator */ + CURLOPT(CURLOPT_MAIL_AUTH, CURLOPTTYPE_STRINGPOINT, 217), + + /* Enable/disable SASL initial response */ + CURLOPT(CURLOPT_SASL_IR, CURLOPTTYPE_LONG, 218), + + /* Function that will be called instead of the internal progress display + * function. This function should be defined as the curl_xferinfo_callback + * prototype defines. (Deprecates CURLOPT_PROGRESSFUNCTION) */ + CURLOPT(CURLOPT_XFERINFOFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 219), + + /* The XOAUTH2 bearer token */ + CURLOPT(CURLOPT_XOAUTH2_BEARER, CURLOPTTYPE_STRINGPOINT, 220), + + /* Set the interface string to use as outgoing network + * interface for DNS requests. + * Only supported by the c-ares DNS backend */ + CURLOPT(CURLOPT_DNS_INTERFACE, CURLOPTTYPE_STRINGPOINT, 221), + + /* Set the local IPv4 address to use for outgoing DNS requests. + * Only supported by the c-ares DNS backend */ + CURLOPT(CURLOPT_DNS_LOCAL_IP4, CURLOPTTYPE_STRINGPOINT, 222), + + /* Set the local IPv6 address to use for outgoing DNS requests. + * Only supported by the c-ares DNS backend */ + CURLOPT(CURLOPT_DNS_LOCAL_IP6, CURLOPTTYPE_STRINGPOINT, 223), + + /* Set authentication options directly */ + CURLOPT(CURLOPT_LOGIN_OPTIONS, CURLOPTTYPE_STRINGPOINT, 224), + + /* Enable/disable TLS NPN extension (http2 over ssl might fail without) */ + CURLOPT(CURLOPT_SSL_ENABLE_NPN, CURLOPTTYPE_LONG, 225), + + /* Enable/disable TLS ALPN extension (http2 over ssl might fail without) */ + CURLOPT(CURLOPT_SSL_ENABLE_ALPN, CURLOPTTYPE_LONG, 226), + + /* Time to wait for a response to a HTTP request containing an + * Expect: 100-continue header before sending the data anyway. */ + CURLOPT(CURLOPT_EXPECT_100_TIMEOUT_MS, CURLOPTTYPE_LONG, 227), + + /* This points to a linked list of headers used for proxy requests only, + struct curl_slist kind */ + CURLOPT(CURLOPT_PROXYHEADER, CURLOPTTYPE_SLISTPOINT, 228), + + /* Pass in a bitmask of "header options" */ + CURLOPT(CURLOPT_HEADEROPT, CURLOPTTYPE_VALUES, 229), + + /* The public key in DER form used to validate the peer public key + this option is used only if SSL_VERIFYPEER is true */ + CURLOPT(CURLOPT_PINNEDPUBLICKEY, CURLOPTTYPE_STRINGPOINT, 230), + + /* Path to Unix domain socket */ + CURLOPT(CURLOPT_UNIX_SOCKET_PATH, CURLOPTTYPE_STRINGPOINT, 231), + + /* Set if we should verify the certificate status. */ + CURLOPT(CURLOPT_SSL_VERIFYSTATUS, CURLOPTTYPE_LONG, 232), + + /* Set if we should enable TLS false start. */ + CURLOPT(CURLOPT_SSL_FALSESTART, CURLOPTTYPE_LONG, 233), + + /* Do not squash dot-dot sequences */ + CURLOPT(CURLOPT_PATH_AS_IS, CURLOPTTYPE_LONG, 234), + + /* Proxy Service Name */ + CURLOPT(CURLOPT_PROXY_SERVICE_NAME, CURLOPTTYPE_STRINGPOINT, 235), + + /* Service Name */ + CURLOPT(CURLOPT_SERVICE_NAME, CURLOPTTYPE_STRINGPOINT, 236), + + /* Wait/don't wait for pipe/mutex to clarify */ + CURLOPT(CURLOPT_PIPEWAIT, CURLOPTTYPE_LONG, 237), + + /* Set the protocol used when curl is given a URL without a protocol */ + CURLOPT(CURLOPT_DEFAULT_PROTOCOL, CURLOPTTYPE_STRINGPOINT, 238), + + /* Set stream weight, 1 - 256 (default is 16) */ + CURLOPT(CURLOPT_STREAM_WEIGHT, CURLOPTTYPE_LONG, 239), + + /* Set stream dependency on another CURL handle */ + CURLOPT(CURLOPT_STREAM_DEPENDS, CURLOPTTYPE_OBJECTPOINT, 240), + + /* Set E-xclusive stream dependency on another CURL handle */ + CURLOPT(CURLOPT_STREAM_DEPENDS_E, CURLOPTTYPE_OBJECTPOINT, 241), + + /* Do not send any tftp option requests to the server */ + CURLOPT(CURLOPT_TFTP_NO_OPTIONS, CURLOPTTYPE_LONG, 242), + + /* Linked-list of host:port:connect-to-host:connect-to-port, + overrides the URL's host:port (only for the network layer) */ + CURLOPT(CURLOPT_CONNECT_TO, CURLOPTTYPE_SLISTPOINT, 243), + + /* Set TCP Fast Open */ + CURLOPT(CURLOPT_TCP_FASTOPEN, CURLOPTTYPE_LONG, 244), + + /* Continue to send data if the server responds early with an + * HTTP status code >= 300 */ + CURLOPT(CURLOPT_KEEP_SENDING_ON_ERROR, CURLOPTTYPE_LONG, 245), + + /* The CApath or CAfile used to validate the proxy certificate + this option is used only if PROXY_SSL_VERIFYPEER is true */ + CURLOPT(CURLOPT_PROXY_CAINFO, CURLOPTTYPE_STRINGPOINT, 246), + + /* The CApath directory used to validate the proxy certificate + this option is used only if PROXY_SSL_VERIFYPEER is true */ + CURLOPT(CURLOPT_PROXY_CAPATH, CURLOPTTYPE_STRINGPOINT, 247), + + /* Set if we should verify the proxy in ssl handshake, + set 1 to verify. */ + CURLOPT(CURLOPT_PROXY_SSL_VERIFYPEER, CURLOPTTYPE_LONG, 248), + + /* Set if we should verify the Common name from the proxy certificate in ssl + * handshake, set 1 to check existence, 2 to ensure that it matches + * the provided hostname. */ + CURLOPT(CURLOPT_PROXY_SSL_VERIFYHOST, CURLOPTTYPE_LONG, 249), + + /* What version to specifically try to use for proxy. + See CURL_SSLVERSION defines below. */ + CURLOPT(CURLOPT_PROXY_SSLVERSION, CURLOPTTYPE_VALUES, 250), + + /* Set a username for authenticated TLS for proxy */ + CURLOPT(CURLOPT_PROXY_TLSAUTH_USERNAME, CURLOPTTYPE_STRINGPOINT, 251), + + /* Set a password for authenticated TLS for proxy */ + CURLOPT(CURLOPT_PROXY_TLSAUTH_PASSWORD, CURLOPTTYPE_STRINGPOINT, 252), + + /* Set authentication type for authenticated TLS for proxy */ + CURLOPT(CURLOPT_PROXY_TLSAUTH_TYPE, CURLOPTTYPE_STRINGPOINT, 253), + + /* name of the file keeping your private SSL-certificate for proxy */ + CURLOPT(CURLOPT_PROXY_SSLCERT, CURLOPTTYPE_STRINGPOINT, 254), + + /* type of the file keeping your SSL-certificate ("DER", "PEM", "ENG") for + proxy */ + CURLOPT(CURLOPT_PROXY_SSLCERTTYPE, CURLOPTTYPE_STRINGPOINT, 255), + + /* name of the file keeping your private SSL-key for proxy */ + CURLOPT(CURLOPT_PROXY_SSLKEY, CURLOPTTYPE_STRINGPOINT, 256), + + /* type of the file keeping your private SSL-key ("DER", "PEM", "ENG") for + proxy */ + CURLOPT(CURLOPT_PROXY_SSLKEYTYPE, CURLOPTTYPE_STRINGPOINT, 257), + + /* password for the SSL private key for proxy */ + CURLOPT(CURLOPT_PROXY_KEYPASSWD, CURLOPTTYPE_STRINGPOINT, 258), + + /* Specify which SSL ciphers to use for proxy */ + CURLOPT(CURLOPT_PROXY_SSL_CIPHER_LIST, CURLOPTTYPE_STRINGPOINT, 259), + + /* CRL file for proxy */ + CURLOPT(CURLOPT_PROXY_CRLFILE, CURLOPTTYPE_STRINGPOINT, 260), + + /* Enable/disable specific SSL features with a bitmask for proxy, see + CURLSSLOPT_* */ + CURLOPT(CURLOPT_PROXY_SSL_OPTIONS, CURLOPTTYPE_LONG, 261), + + /* Name of pre proxy to use. */ + CURLOPT(CURLOPT_PRE_PROXY, CURLOPTTYPE_STRINGPOINT, 262), + + /* The public key in DER form used to validate the proxy public key + this option is used only if PROXY_SSL_VERIFYPEER is true */ + CURLOPT(CURLOPT_PROXY_PINNEDPUBLICKEY, CURLOPTTYPE_STRINGPOINT, 263), + + /* Path to an abstract Unix domain socket */ + CURLOPT(CURLOPT_ABSTRACT_UNIX_SOCKET, CURLOPTTYPE_STRINGPOINT, 264), + + /* Suppress proxy CONNECT response headers from user callbacks */ + CURLOPT(CURLOPT_SUPPRESS_CONNECT_HEADERS, CURLOPTTYPE_LONG, 265), + + /* The request target, instead of extracted from the URL */ + CURLOPT(CURLOPT_REQUEST_TARGET, CURLOPTTYPE_STRINGPOINT, 266), + + /* bitmask of allowed auth methods for connections to SOCKS5 proxies */ + CURLOPT(CURLOPT_SOCKS5_AUTH, CURLOPTTYPE_LONG, 267), + + /* Enable/disable SSH compression */ + CURLOPT(CURLOPT_SSH_COMPRESSION, CURLOPTTYPE_LONG, 268), + + /* Post MIME data. */ + CURLOPT(CURLOPT_MIMEPOST, CURLOPTTYPE_OBJECTPOINT, 269), + + /* Time to use with the CURLOPT_TIMECONDITION. Specified in number of + seconds since 1 Jan 1970. */ + CURLOPT(CURLOPT_TIMEVALUE_LARGE, CURLOPTTYPE_OFF_T, 270), + + /* Head start in milliseconds to give happy eyeballs. */ + CURLOPT(CURLOPT_HAPPY_EYEBALLS_TIMEOUT_MS, CURLOPTTYPE_LONG, 271), + + /* Function that will be called before a resolver request is made */ + CURLOPT(CURLOPT_RESOLVER_START_FUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 272), + + /* User data to pass to the resolver start callback. */ + CURLOPT(CURLOPT_RESOLVER_START_DATA, CURLOPTTYPE_CBPOINT, 273), + + /* send HAProxy PROXY protocol header? */ + CURLOPT(CURLOPT_HAPROXYPROTOCOL, CURLOPTTYPE_LONG, 274), + + /* shuffle addresses before use when DNS returns multiple */ + CURLOPT(CURLOPT_DNS_SHUFFLE_ADDRESSES, CURLOPTTYPE_LONG, 275), + + /* Specify which TLS 1.3 ciphers suites to use */ + CURLOPT(CURLOPT_TLS13_CIPHERS, CURLOPTTYPE_STRINGPOINT, 276), + CURLOPT(CURLOPT_PROXY_TLS13_CIPHERS, CURLOPTTYPE_STRINGPOINT, 277), + + /* Disallow specifying username/login in URL. */ + CURLOPT(CURLOPT_DISALLOW_USERNAME_IN_URL, CURLOPTTYPE_LONG, 278), + + /* DNS-over-HTTPS URL */ + CURLOPT(CURLOPT_DOH_URL, CURLOPTTYPE_STRINGPOINT, 279), + + /* Preferred buffer size to use for uploads */ + CURLOPT(CURLOPT_UPLOAD_BUFFERSIZE, CURLOPTTYPE_LONG, 280), + + /* Time in ms between connection upkeep calls for long-lived connections. */ + CURLOPT(CURLOPT_UPKEEP_INTERVAL_MS, CURLOPTTYPE_LONG, 281), + + /* Specify URL using CURL URL API. */ + CURLOPT(CURLOPT_CURLU, CURLOPTTYPE_OBJECTPOINT, 282), + + /* add trailing data just after no more data is available */ + CURLOPT(CURLOPT_TRAILERFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 283), + + /* pointer to be passed to HTTP_TRAILER_FUNCTION */ + CURLOPT(CURLOPT_TRAILERDATA, CURLOPTTYPE_CBPOINT, 284), + + /* set this to 1L to allow HTTP/0.9 responses or 0L to disallow */ + CURLOPT(CURLOPT_HTTP09_ALLOWED, CURLOPTTYPE_LONG, 285), + + /* alt-svc control bitmask */ + CURLOPT(CURLOPT_ALTSVC_CTRL, CURLOPTTYPE_LONG, 286), + + /* alt-svc cache file name to possibly read from/write to */ + CURLOPT(CURLOPT_ALTSVC, CURLOPTTYPE_STRINGPOINT, 287), + + /* maximum age (idle time) of a connection to consider it for reuse + * (in seconds) */ + CURLOPT(CURLOPT_MAXAGE_CONN, CURLOPTTYPE_LONG, 288), + + /* SASL authorisation identity */ + CURLOPT(CURLOPT_SASL_AUTHZID, CURLOPTTYPE_STRINGPOINT, 289), + + /* allow RCPT TO command to fail for some recipients */ + CURLOPT(CURLOPT_MAIL_RCPT_ALLLOWFAILS, CURLOPTTYPE_LONG, 290), + + /* the private SSL-certificate as a "blob" */ + CURLOPT(CURLOPT_SSLCERT_BLOB, CURLOPTTYPE_BLOB, 291), + CURLOPT(CURLOPT_SSLKEY_BLOB, CURLOPTTYPE_BLOB, 292), + CURLOPT(CURLOPT_PROXY_SSLCERT_BLOB, CURLOPTTYPE_BLOB, 293), + CURLOPT(CURLOPT_PROXY_SSLKEY_BLOB, CURLOPTTYPE_BLOB, 294), + CURLOPT(CURLOPT_ISSUERCERT_BLOB, CURLOPTTYPE_BLOB, 295), + + /* Issuer certificate for proxy */ + CURLOPT(CURLOPT_PROXY_ISSUERCERT, CURLOPTTYPE_STRINGPOINT, 296), + CURLOPT(CURLOPT_PROXY_ISSUERCERT_BLOB, CURLOPTTYPE_BLOB, 297), + + /* the EC curves requested by the TLS client (RFC 8422, 5.1); + * OpenSSL support via 'set_groups'/'set_curves': + * https://www.openssl.org/docs/manmaster/man3/SSL_CTX_set1_groups.html + */ + CURLOPT(CURLOPT_SSL_EC_CURVES, CURLOPTTYPE_STRINGPOINT, 298), + + /* HSTS bitmask */ + CURLOPT(CURLOPT_HSTS_CTRL, CURLOPTTYPE_LONG, 299), + /* HSTS file name */ + CURLOPT(CURLOPT_HSTS, CURLOPTTYPE_STRINGPOINT, 300), + + /* HSTS read callback */ + CURLOPT(CURLOPT_HSTSREADFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 301), + CURLOPT(CURLOPT_HSTSREADDATA, CURLOPTTYPE_CBPOINT, 302), + + /* HSTS write callback */ + CURLOPT(CURLOPT_HSTSWRITEFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 303), + CURLOPT(CURLOPT_HSTSWRITEDATA, CURLOPTTYPE_CBPOINT, 304), + + /* Parameters for V4 signature */ + CURLOPT(CURLOPT_AWS_SIGV4, CURLOPTTYPE_STRINGPOINT, 305), + + /* Same as CURLOPT_SSL_VERIFYPEER but for DoH (DNS-over-HTTPS) servers. */ + CURLOPT(CURLOPT_DOH_SSL_VERIFYPEER, CURLOPTTYPE_LONG, 306), + + /* Same as CURLOPT_SSL_VERIFYHOST but for DoH (DNS-over-HTTPS) servers. */ + CURLOPT(CURLOPT_DOH_SSL_VERIFYHOST, CURLOPTTYPE_LONG, 307), + + /* Same as CURLOPT_SSL_VERIFYSTATUS but for DoH (DNS-over-HTTPS) servers. */ + CURLOPT(CURLOPT_DOH_SSL_VERIFYSTATUS, CURLOPTTYPE_LONG, 308), + + /* The CA certificates as "blob" used to validate the peer certificate + this option is used only if SSL_VERIFYPEER is true */ + CURLOPT(CURLOPT_CAINFO_BLOB, CURLOPTTYPE_BLOB, 309), + + /* The CA certificates as "blob" used to validate the proxy certificate + this option is used only if PROXY_SSL_VERIFYPEER is true */ + CURLOPT(CURLOPT_PROXY_CAINFO_BLOB, CURLOPTTYPE_BLOB, 310), + + /* used by scp/sftp to verify the host's public key */ + CURLOPT(CURLOPT_SSH_HOST_PUBLIC_KEY_SHA256, CURLOPTTYPE_STRINGPOINT, 311), + + /* Function that will be called immediately before the initial request + is made on a connection (after any protocol negotiation step). */ + CURLOPT(CURLOPT_PREREQFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 312), + + /* Data passed to the CURLOPT_PREREQFUNCTION callback */ + CURLOPT(CURLOPT_PREREQDATA, CURLOPTTYPE_CBPOINT, 313), + + /* maximum age (since creation) of a connection to consider it for reuse + * (in seconds) */ + CURLOPT(CURLOPT_MAXLIFETIME_CONN, CURLOPTTYPE_LONG, 314), + + /* Set MIME option flags. */ + CURLOPT(CURLOPT_MIME_OPTIONS, CURLOPTTYPE_LONG, 315), + + CURLOPT_LASTENTRY /* the last unused */ +} CURLoption; + +#ifndef CURL_NO_OLDIES /* define this to test if your app builds with all + the obsolete stuff removed! */ + +/* Backwards compatibility with older names */ +/* These are scheduled to disappear by 2011 */ + +/* This was added in version 7.19.1 */ +#define CURLOPT_POST301 CURLOPT_POSTREDIR + +/* These are scheduled to disappear by 2009 */ + +/* The following were added in 7.17.0 */ +#define CURLOPT_SSLKEYPASSWD CURLOPT_KEYPASSWD +#define CURLOPT_FTPAPPEND CURLOPT_APPEND +#define CURLOPT_FTPLISTONLY CURLOPT_DIRLISTONLY +#define CURLOPT_FTP_SSL CURLOPT_USE_SSL + +/* The following were added earlier */ + +#define CURLOPT_SSLCERTPASSWD CURLOPT_KEYPASSWD +#define CURLOPT_KRB4LEVEL CURLOPT_KRBLEVEL + +#else +/* This is set if CURL_NO_OLDIES is defined at compile-time */ +#undef CURLOPT_DNS_USE_GLOBAL_CACHE /* soon obsolete */ +#endif + + + /* Below here follows defines for the CURLOPT_IPRESOLVE option. If a host + name resolves addresses using more than one IP protocol version, this + option might be handy to force libcurl to use a specific IP version. */ +#define CURL_IPRESOLVE_WHATEVER 0 /* default, uses addresses to all IP + versions that your system allows */ +#define CURL_IPRESOLVE_V4 1 /* uses only IPv4 addresses/connections */ +#define CURL_IPRESOLVE_V6 2 /* uses only IPv6 addresses/connections */ + + /* three convenient "aliases" that follow the name scheme better */ +#define CURLOPT_RTSPHEADER CURLOPT_HTTPHEADER + + /* These enums are for use with the CURLOPT_HTTP_VERSION option. */ +enum { + CURL_HTTP_VERSION_NONE, /* setting this means we don't care, and that we'd + like the library to choose the best possible + for us! */ + CURL_HTTP_VERSION_1_0, /* please use HTTP 1.0 in the request */ + CURL_HTTP_VERSION_1_1, /* please use HTTP 1.1 in the request */ + CURL_HTTP_VERSION_2_0, /* please use HTTP 2 in the request */ + CURL_HTTP_VERSION_2TLS, /* use version 2 for HTTPS, version 1.1 for HTTP */ + CURL_HTTP_VERSION_2_PRIOR_KNOWLEDGE, /* please use HTTP 2 without HTTP/1.1 + Upgrade */ + CURL_HTTP_VERSION_3 = 30, /* Makes use of explicit HTTP/3 without fallback. + Use CURLOPT_ALTSVC to enable HTTP/3 upgrade */ + CURL_HTTP_VERSION_LAST /* *ILLEGAL* http version */ +}; + +/* Convenience definition simple because the name of the version is HTTP/2 and + not 2.0. The 2_0 version of the enum name was set while the version was + still planned to be 2.0 and we stick to it for compatibility. */ +#define CURL_HTTP_VERSION_2 CURL_HTTP_VERSION_2_0 + +/* + * Public API enums for RTSP requests + */ +enum { + CURL_RTSPREQ_NONE, /* first in list */ + CURL_RTSPREQ_OPTIONS, + CURL_RTSPREQ_DESCRIBE, + CURL_RTSPREQ_ANNOUNCE, + CURL_RTSPREQ_SETUP, + CURL_RTSPREQ_PLAY, + CURL_RTSPREQ_PAUSE, + CURL_RTSPREQ_TEARDOWN, + CURL_RTSPREQ_GET_PARAMETER, + CURL_RTSPREQ_SET_PARAMETER, + CURL_RTSPREQ_RECORD, + CURL_RTSPREQ_RECEIVE, + CURL_RTSPREQ_LAST /* last in list */ +}; + + /* These enums are for use with the CURLOPT_NETRC option. */ +enum CURL_NETRC_OPTION { + CURL_NETRC_IGNORED, /* The .netrc will never be read. + * This is the default. */ + CURL_NETRC_OPTIONAL, /* A user:password in the URL will be preferred + * to one in the .netrc. */ + CURL_NETRC_REQUIRED, /* A user:password in the URL will be ignored. + * Unless one is set programmatically, the .netrc + * will be queried. */ + CURL_NETRC_LAST +}; + +enum { + CURL_SSLVERSION_DEFAULT, + CURL_SSLVERSION_TLSv1, /* TLS 1.x */ + CURL_SSLVERSION_SSLv2, + CURL_SSLVERSION_SSLv3, + CURL_SSLVERSION_TLSv1_0, + CURL_SSLVERSION_TLSv1_1, + CURL_SSLVERSION_TLSv1_2, + CURL_SSLVERSION_TLSv1_3, + + CURL_SSLVERSION_LAST /* never use, keep last */ +}; + +enum { + CURL_SSLVERSION_MAX_NONE = 0, + CURL_SSLVERSION_MAX_DEFAULT = (CURL_SSLVERSION_TLSv1 << 16), + CURL_SSLVERSION_MAX_TLSv1_0 = (CURL_SSLVERSION_TLSv1_0 << 16), + CURL_SSLVERSION_MAX_TLSv1_1 = (CURL_SSLVERSION_TLSv1_1 << 16), + CURL_SSLVERSION_MAX_TLSv1_2 = (CURL_SSLVERSION_TLSv1_2 << 16), + CURL_SSLVERSION_MAX_TLSv1_3 = (CURL_SSLVERSION_TLSv1_3 << 16), + + /* never use, keep last */ + CURL_SSLVERSION_MAX_LAST = (CURL_SSLVERSION_LAST << 16) +}; + +enum CURL_TLSAUTH { + CURL_TLSAUTH_NONE, + CURL_TLSAUTH_SRP, + CURL_TLSAUTH_LAST /* never use, keep last */ +}; + +/* symbols to use with CURLOPT_POSTREDIR. + CURL_REDIR_POST_301, CURL_REDIR_POST_302 and CURL_REDIR_POST_303 + can be bitwise ORed so that CURL_REDIR_POST_301 | CURL_REDIR_POST_302 + | CURL_REDIR_POST_303 == CURL_REDIR_POST_ALL */ + +#define CURL_REDIR_GET_ALL 0 +#define CURL_REDIR_POST_301 1 +#define CURL_REDIR_POST_302 2 +#define CURL_REDIR_POST_303 4 +#define CURL_REDIR_POST_ALL \ + (CURL_REDIR_POST_301|CURL_REDIR_POST_302|CURL_REDIR_POST_303) + +typedef enum { + CURL_TIMECOND_NONE, + + CURL_TIMECOND_IFMODSINCE, + CURL_TIMECOND_IFUNMODSINCE, + CURL_TIMECOND_LASTMOD, + + CURL_TIMECOND_LAST +} curl_TimeCond; + +/* Special size_t value signaling a null-terminated string. */ +#define CURL_ZERO_TERMINATED ((size_t) -1) + +/* curl_strequal() and curl_strnequal() are subject for removal in a future + release */ +CURL_EXTERN int curl_strequal(const char *s1, const char *s2); +CURL_EXTERN int curl_strnequal(const char *s1, const char *s2, size_t n); + +/* Mime/form handling support. */ +typedef struct curl_mime curl_mime; /* Mime context. */ +typedef struct curl_mimepart curl_mimepart; /* Mime part context. */ + +/* CURLMIMEOPT_ defines are for the CURLOPT_MIME_OPTIONS option. */ +#define CURLMIMEOPT_FORMESCAPE (1<<0) /* Use backslash-escaping for forms. */ + +/* + * NAME curl_mime_init() + * + * DESCRIPTION + * + * Create a mime context and return its handle. The easy parameter is the + * target handle. + */ +CURL_EXTERN curl_mime *curl_mime_init(CURL *easy); + +/* + * NAME curl_mime_free() + * + * DESCRIPTION + * + * release a mime handle and its substructures. + */ +CURL_EXTERN void curl_mime_free(curl_mime *mime); + +/* + * NAME curl_mime_addpart() + * + * DESCRIPTION + * + * Append a new empty part to the given mime context and return a handle to + * the created part. + */ +CURL_EXTERN curl_mimepart *curl_mime_addpart(curl_mime *mime); + +/* + * NAME curl_mime_name() + * + * DESCRIPTION + * + * Set mime/form part name. + */ +CURL_EXTERN CURLcode curl_mime_name(curl_mimepart *part, const char *name); + +/* + * NAME curl_mime_filename() + * + * DESCRIPTION + * + * Set mime part remote file name. + */ +CURL_EXTERN CURLcode curl_mime_filename(curl_mimepart *part, + const char *filename); + +/* + * NAME curl_mime_type() + * + * DESCRIPTION + * + * Set mime part type. + */ +CURL_EXTERN CURLcode curl_mime_type(curl_mimepart *part, const char *mimetype); + +/* + * NAME curl_mime_encoder() + * + * DESCRIPTION + * + * Set mime data transfer encoder. + */ +CURL_EXTERN CURLcode curl_mime_encoder(curl_mimepart *part, + const char *encoding); + +/* + * NAME curl_mime_data() + * + * DESCRIPTION + * + * Set mime part data source from memory data, + */ +CURL_EXTERN CURLcode curl_mime_data(curl_mimepart *part, + const char *data, size_t datasize); + +/* + * NAME curl_mime_filedata() + * + * DESCRIPTION + * + * Set mime part data source from named file. + */ +CURL_EXTERN CURLcode curl_mime_filedata(curl_mimepart *part, + const char *filename); + +/* + * NAME curl_mime_data_cb() + * + * DESCRIPTION + * + * Set mime part data source from callback function. + */ +CURL_EXTERN CURLcode curl_mime_data_cb(curl_mimepart *part, + curl_off_t datasize, + curl_read_callback readfunc, + curl_seek_callback seekfunc, + curl_free_callback freefunc, + void *arg); + +/* + * NAME curl_mime_subparts() + * + * DESCRIPTION + * + * Set mime part data source from subparts. + */ +CURL_EXTERN CURLcode curl_mime_subparts(curl_mimepart *part, + curl_mime *subparts); +/* + * NAME curl_mime_headers() + * + * DESCRIPTION + * + * Set mime part headers. + */ +CURL_EXTERN CURLcode curl_mime_headers(curl_mimepart *part, + struct curl_slist *headers, + int take_ownership); + +typedef enum { + CURLFORM_NOTHING, /********* the first one is unused ************/ + CURLFORM_COPYNAME, + CURLFORM_PTRNAME, + CURLFORM_NAMELENGTH, + CURLFORM_COPYCONTENTS, + CURLFORM_PTRCONTENTS, + CURLFORM_CONTENTSLENGTH, + CURLFORM_FILECONTENT, + CURLFORM_ARRAY, + CURLFORM_OBSOLETE, + CURLFORM_FILE, + + CURLFORM_BUFFER, + CURLFORM_BUFFERPTR, + CURLFORM_BUFFERLENGTH, + + CURLFORM_CONTENTTYPE, + CURLFORM_CONTENTHEADER, + CURLFORM_FILENAME, + CURLFORM_END, + CURLFORM_OBSOLETE2, + + CURLFORM_STREAM, + CURLFORM_CONTENTLEN, /* added in 7.46.0, provide a curl_off_t length */ + + CURLFORM_LASTENTRY /* the last unused */ +} CURLformoption; + +/* structure to be used as parameter for CURLFORM_ARRAY */ +struct curl_forms { + CURLformoption option; + const char *value; +}; + +/* use this for multipart formpost building */ +/* Returns code for curl_formadd() + * + * Returns: + * CURL_FORMADD_OK on success + * CURL_FORMADD_MEMORY if the FormInfo allocation fails + * CURL_FORMADD_OPTION_TWICE if one option is given twice for one Form + * CURL_FORMADD_NULL if a null pointer was given for a char + * CURL_FORMADD_MEMORY if the allocation of a FormInfo struct failed + * CURL_FORMADD_UNKNOWN_OPTION if an unknown option was used + * CURL_FORMADD_INCOMPLETE if the some FormInfo is not complete (or error) + * CURL_FORMADD_MEMORY if a curl_httppost struct cannot be allocated + * CURL_FORMADD_MEMORY if some allocation for string copying failed. + * CURL_FORMADD_ILLEGAL_ARRAY if an illegal option is used in an array + * + ***************************************************************************/ +typedef enum { + CURL_FORMADD_OK, /* first, no error */ + + CURL_FORMADD_MEMORY, + CURL_FORMADD_OPTION_TWICE, + CURL_FORMADD_NULL, + CURL_FORMADD_UNKNOWN_OPTION, + CURL_FORMADD_INCOMPLETE, + CURL_FORMADD_ILLEGAL_ARRAY, + CURL_FORMADD_DISABLED, /* libcurl was built with this disabled */ + + CURL_FORMADD_LAST /* last */ +} CURLFORMcode; + +/* + * NAME curl_formadd() + * + * DESCRIPTION + * + * Pretty advanced function for building multi-part formposts. Each invoke + * adds one part that together construct a full post. Then use + * CURLOPT_HTTPPOST to send it off to libcurl. + */ +CURL_EXTERN CURLFORMcode curl_formadd(struct curl_httppost **httppost, + struct curl_httppost **last_post, + ...); + +/* + * callback function for curl_formget() + * The void *arg pointer will be the one passed as second argument to + * curl_formget(). + * The character buffer passed to it must not be freed. + * Should return the buffer length passed to it as the argument "len" on + * success. + */ +typedef size_t (*curl_formget_callback)(void *arg, const char *buf, + size_t len); + +/* + * NAME curl_formget() + * + * DESCRIPTION + * + * Serialize a curl_httppost struct built with curl_formadd(). + * Accepts a void pointer as second argument which will be passed to + * the curl_formget_callback function. + * Returns 0 on success. + */ +CURL_EXTERN int curl_formget(struct curl_httppost *form, void *arg, + curl_formget_callback append); +/* + * NAME curl_formfree() + * + * DESCRIPTION + * + * Free a multipart formpost previously built with curl_formadd(). + */ +CURL_EXTERN void curl_formfree(struct curl_httppost *form); + +/* + * NAME curl_getenv() + * + * DESCRIPTION + * + * Returns a malloc()'ed string that MUST be curl_free()ed after usage is + * complete. DEPRECATED - see lib/README.curlx + */ +CURL_EXTERN char *curl_getenv(const char *variable); + +/* + * NAME curl_version() + * + * DESCRIPTION + * + * Returns a static ascii string of the libcurl version. + */ +CURL_EXTERN char *curl_version(void); + +/* + * NAME curl_easy_escape() + * + * DESCRIPTION + * + * Escapes URL strings (converts all letters consider illegal in URLs to their + * %XX versions). This function returns a new allocated string or NULL if an + * error occurred. + */ +CURL_EXTERN char *curl_easy_escape(CURL *handle, + const char *string, + int length); + +/* the previous version: */ +CURL_EXTERN char *curl_escape(const char *string, + int length); + + +/* + * NAME curl_easy_unescape() + * + * DESCRIPTION + * + * Unescapes URL encoding in strings (converts all %XX codes to their 8bit + * versions). This function returns a new allocated string or NULL if an error + * occurred. + * Conversion Note: On non-ASCII platforms the ASCII %XX codes are + * converted into the host encoding. + */ +CURL_EXTERN char *curl_easy_unescape(CURL *handle, + const char *string, + int length, + int *outlength); + +/* the previous version */ +CURL_EXTERN char *curl_unescape(const char *string, + int length); + +/* + * NAME curl_free() + * + * DESCRIPTION + * + * Provided for de-allocation in the same translation unit that did the + * allocation. Added in libcurl 7.10 + */ +CURL_EXTERN void curl_free(void *p); + +/* + * NAME curl_global_init() + * + * DESCRIPTION + * + * curl_global_init() should be invoked exactly once for each application that + * uses libcurl and before any call of other libcurl functions. + * + * This function is not thread-safe! + */ +CURL_EXTERN CURLcode curl_global_init(long flags); + +/* + * NAME curl_global_init_mem() + * + * DESCRIPTION + * + * curl_global_init() or curl_global_init_mem() should be invoked exactly once + * for each application that uses libcurl. This function can be used to + * initialize libcurl and set user defined memory management callback + * functions. Users can implement memory management routines to check for + * memory leaks, check for mis-use of the curl library etc. User registered + * callback routines will be invoked by this library instead of the system + * memory management routines like malloc, free etc. + */ +CURL_EXTERN CURLcode curl_global_init_mem(long flags, + curl_malloc_callback m, + curl_free_callback f, + curl_realloc_callback r, + curl_strdup_callback s, + curl_calloc_callback c); + +/* + * NAME curl_global_cleanup() + * + * DESCRIPTION + * + * curl_global_cleanup() should be invoked exactly once for each application + * that uses libcurl + */ +CURL_EXTERN void curl_global_cleanup(void); + +/* linked-list structure for the CURLOPT_QUOTE option (and other) */ +struct curl_slist { + char *data; + struct curl_slist *next; +}; + +/* + * NAME curl_global_sslset() + * + * DESCRIPTION + * + * When built with multiple SSL backends, curl_global_sslset() allows to + * choose one. This function can only be called once, and it must be called + * *before* curl_global_init(). + * + * The backend can be identified by the id (e.g. CURLSSLBACKEND_OPENSSL). The + * backend can also be specified via the name parameter (passing -1 as id). + * If both id and name are specified, the name will be ignored. If neither id + * nor name are specified, the function will fail with + * CURLSSLSET_UNKNOWN_BACKEND and set the "avail" pointer to the + * NULL-terminated list of available backends. + * + * Upon success, the function returns CURLSSLSET_OK. + * + * If the specified SSL backend is not available, the function returns + * CURLSSLSET_UNKNOWN_BACKEND and sets the "avail" pointer to a NULL-terminated + * list of available SSL backends. + * + * The SSL backend can be set only once. If it has already been set, a + * subsequent attempt to change it will result in a CURLSSLSET_TOO_LATE. + */ + +struct curl_ssl_backend { + curl_sslbackend id; + const char *name; +}; +typedef struct curl_ssl_backend curl_ssl_backend; + +typedef enum { + CURLSSLSET_OK = 0, + CURLSSLSET_UNKNOWN_BACKEND, + CURLSSLSET_TOO_LATE, + CURLSSLSET_NO_BACKENDS /* libcurl was built without any SSL support */ +} CURLsslset; + +CURL_EXTERN CURLsslset curl_global_sslset(curl_sslbackend id, const char *name, + const curl_ssl_backend ***avail); + +/* + * NAME curl_slist_append() + * + * DESCRIPTION + * + * Appends a string to a linked list. If no list exists, it will be created + * first. Returns the new list, after appending. + */ +CURL_EXTERN struct curl_slist *curl_slist_append(struct curl_slist *, + const char *); + +/* + * NAME curl_slist_free_all() + * + * DESCRIPTION + * + * free a previously built curl_slist. + */ +CURL_EXTERN void curl_slist_free_all(struct curl_slist *); + +/* + * NAME curl_getdate() + * + * DESCRIPTION + * + * Returns the time, in seconds since 1 Jan 1970 of the time string given in + * the first argument. The time argument in the second parameter is unused + * and should be set to NULL. + */ +CURL_EXTERN time_t curl_getdate(const char *p, const time_t *unused); + +/* info about the certificate chain, only for OpenSSL, GnuTLS, Schannel, NSS + and GSKit builds. Asked for with CURLOPT_CERTINFO / CURLINFO_CERTINFO */ +struct curl_certinfo { + int num_of_certs; /* number of certificates with information */ + struct curl_slist **certinfo; /* for each index in this array, there's a + linked list with textual information in the + format "name: value" */ +}; + +/* Information about the SSL library used and the respective internal SSL + handle, which can be used to obtain further information regarding the + connection. Asked for with CURLINFO_TLS_SSL_PTR or CURLINFO_TLS_SESSION. */ +struct curl_tlssessioninfo { + curl_sslbackend backend; + void *internals; +}; + +#define CURLINFO_STRING 0x100000 +#define CURLINFO_LONG 0x200000 +#define CURLINFO_DOUBLE 0x300000 +#define CURLINFO_SLIST 0x400000 +#define CURLINFO_PTR 0x400000 /* same as SLIST */ +#define CURLINFO_SOCKET 0x500000 +#define CURLINFO_OFF_T 0x600000 +#define CURLINFO_MASK 0x0fffff +#define CURLINFO_TYPEMASK 0xf00000 + +typedef enum { + CURLINFO_NONE, /* first, never use this */ + CURLINFO_EFFECTIVE_URL = CURLINFO_STRING + 1, + CURLINFO_RESPONSE_CODE = CURLINFO_LONG + 2, + CURLINFO_TOTAL_TIME = CURLINFO_DOUBLE + 3, + CURLINFO_NAMELOOKUP_TIME = CURLINFO_DOUBLE + 4, + CURLINFO_CONNECT_TIME = CURLINFO_DOUBLE + 5, + CURLINFO_PRETRANSFER_TIME = CURLINFO_DOUBLE + 6, + CURLINFO_SIZE_UPLOAD = CURLINFO_DOUBLE + 7, + CURLINFO_SIZE_UPLOAD_T = CURLINFO_OFF_T + 7, + CURLINFO_SIZE_DOWNLOAD = CURLINFO_DOUBLE + 8, + CURLINFO_SIZE_DOWNLOAD_T = CURLINFO_OFF_T + 8, + CURLINFO_SPEED_DOWNLOAD = CURLINFO_DOUBLE + 9, + CURLINFO_SPEED_DOWNLOAD_T = CURLINFO_OFF_T + 9, + CURLINFO_SPEED_UPLOAD = CURLINFO_DOUBLE + 10, + CURLINFO_SPEED_UPLOAD_T = CURLINFO_OFF_T + 10, + CURLINFO_HEADER_SIZE = CURLINFO_LONG + 11, + CURLINFO_REQUEST_SIZE = CURLINFO_LONG + 12, + CURLINFO_SSL_VERIFYRESULT = CURLINFO_LONG + 13, + CURLINFO_FILETIME = CURLINFO_LONG + 14, + CURLINFO_FILETIME_T = CURLINFO_OFF_T + 14, + CURLINFO_CONTENT_LENGTH_DOWNLOAD = CURLINFO_DOUBLE + 15, + CURLINFO_CONTENT_LENGTH_DOWNLOAD_T = CURLINFO_OFF_T + 15, + CURLINFO_CONTENT_LENGTH_UPLOAD = CURLINFO_DOUBLE + 16, + CURLINFO_CONTENT_LENGTH_UPLOAD_T = CURLINFO_OFF_T + 16, + CURLINFO_STARTTRANSFER_TIME = CURLINFO_DOUBLE + 17, + CURLINFO_CONTENT_TYPE = CURLINFO_STRING + 18, + CURLINFO_REDIRECT_TIME = CURLINFO_DOUBLE + 19, + CURLINFO_REDIRECT_COUNT = CURLINFO_LONG + 20, + CURLINFO_PRIVATE = CURLINFO_STRING + 21, + CURLINFO_HTTP_CONNECTCODE = CURLINFO_LONG + 22, + CURLINFO_HTTPAUTH_AVAIL = CURLINFO_LONG + 23, + CURLINFO_PROXYAUTH_AVAIL = CURLINFO_LONG + 24, + CURLINFO_OS_ERRNO = CURLINFO_LONG + 25, + CURLINFO_NUM_CONNECTS = CURLINFO_LONG + 26, + CURLINFO_SSL_ENGINES = CURLINFO_SLIST + 27, + CURLINFO_COOKIELIST = CURLINFO_SLIST + 28, + CURLINFO_LASTSOCKET = CURLINFO_LONG + 29, + CURLINFO_FTP_ENTRY_PATH = CURLINFO_STRING + 30, + CURLINFO_REDIRECT_URL = CURLINFO_STRING + 31, + CURLINFO_PRIMARY_IP = CURLINFO_STRING + 32, + CURLINFO_APPCONNECT_TIME = CURLINFO_DOUBLE + 33, + CURLINFO_CERTINFO = CURLINFO_PTR + 34, + CURLINFO_CONDITION_UNMET = CURLINFO_LONG + 35, + CURLINFO_RTSP_SESSION_ID = CURLINFO_STRING + 36, + CURLINFO_RTSP_CLIENT_CSEQ = CURLINFO_LONG + 37, + CURLINFO_RTSP_SERVER_CSEQ = CURLINFO_LONG + 38, + CURLINFO_RTSP_CSEQ_RECV = CURLINFO_LONG + 39, + CURLINFO_PRIMARY_PORT = CURLINFO_LONG + 40, + CURLINFO_LOCAL_IP = CURLINFO_STRING + 41, + CURLINFO_LOCAL_PORT = CURLINFO_LONG + 42, + CURLINFO_TLS_SESSION = CURLINFO_PTR + 43, + CURLINFO_ACTIVESOCKET = CURLINFO_SOCKET + 44, + CURLINFO_TLS_SSL_PTR = CURLINFO_PTR + 45, + CURLINFO_HTTP_VERSION = CURLINFO_LONG + 46, + CURLINFO_PROXY_SSL_VERIFYRESULT = CURLINFO_LONG + 47, + CURLINFO_PROTOCOL = CURLINFO_LONG + 48, + CURLINFO_SCHEME = CURLINFO_STRING + 49, + CURLINFO_TOTAL_TIME_T = CURLINFO_OFF_T + 50, + CURLINFO_NAMELOOKUP_TIME_T = CURLINFO_OFF_T + 51, + CURLINFO_CONNECT_TIME_T = CURLINFO_OFF_T + 52, + CURLINFO_PRETRANSFER_TIME_T = CURLINFO_OFF_T + 53, + CURLINFO_STARTTRANSFER_TIME_T = CURLINFO_OFF_T + 54, + CURLINFO_REDIRECT_TIME_T = CURLINFO_OFF_T + 55, + CURLINFO_APPCONNECT_TIME_T = CURLINFO_OFF_T + 56, + CURLINFO_RETRY_AFTER = CURLINFO_OFF_T + 57, + CURLINFO_EFFECTIVE_METHOD = CURLINFO_STRING + 58, + CURLINFO_PROXY_ERROR = CURLINFO_LONG + 59, + CURLINFO_REFERER = CURLINFO_STRING + 60, + + CURLINFO_LASTONE = 60 +} CURLINFO; + +/* CURLINFO_RESPONSE_CODE is the new name for the option previously known as + CURLINFO_HTTP_CODE */ +#define CURLINFO_HTTP_CODE CURLINFO_RESPONSE_CODE + +typedef enum { + CURLCLOSEPOLICY_NONE, /* first, never use this */ + + CURLCLOSEPOLICY_OLDEST, + CURLCLOSEPOLICY_LEAST_RECENTLY_USED, + CURLCLOSEPOLICY_LEAST_TRAFFIC, + CURLCLOSEPOLICY_SLOWEST, + CURLCLOSEPOLICY_CALLBACK, + + CURLCLOSEPOLICY_LAST /* last, never use this */ +} curl_closepolicy; + +#define CURL_GLOBAL_SSL (1<<0) /* no purpose since since 7.57.0 */ +#define CURL_GLOBAL_WIN32 (1<<1) +#define CURL_GLOBAL_ALL (CURL_GLOBAL_SSL|CURL_GLOBAL_WIN32) +#define CURL_GLOBAL_NOTHING 0 +#define CURL_GLOBAL_DEFAULT CURL_GLOBAL_ALL +#define CURL_GLOBAL_ACK_EINTR (1<<2) + + +/***************************************************************************** + * Setup defines, protos etc for the sharing stuff. + */ + +/* Different data locks for a single share */ +typedef enum { + CURL_LOCK_DATA_NONE = 0, + /* CURL_LOCK_DATA_SHARE is used internally to say that + * the locking is just made to change the internal state of the share + * itself. + */ + CURL_LOCK_DATA_SHARE, + CURL_LOCK_DATA_COOKIE, + CURL_LOCK_DATA_DNS, + CURL_LOCK_DATA_SSL_SESSION, + CURL_LOCK_DATA_CONNECT, + CURL_LOCK_DATA_PSL, + CURL_LOCK_DATA_LAST +} curl_lock_data; + +/* Different lock access types */ +typedef enum { + CURL_LOCK_ACCESS_NONE = 0, /* unspecified action */ + CURL_LOCK_ACCESS_SHARED = 1, /* for read perhaps */ + CURL_LOCK_ACCESS_SINGLE = 2, /* for write perhaps */ + CURL_LOCK_ACCESS_LAST /* never use */ +} curl_lock_access; + +typedef void (*curl_lock_function)(CURL *handle, + curl_lock_data data, + curl_lock_access locktype, + void *userptr); +typedef void (*curl_unlock_function)(CURL *handle, + curl_lock_data data, + void *userptr); + + +typedef enum { + CURLSHE_OK, /* all is fine */ + CURLSHE_BAD_OPTION, /* 1 */ + CURLSHE_IN_USE, /* 2 */ + CURLSHE_INVALID, /* 3 */ + CURLSHE_NOMEM, /* 4 out of memory */ + CURLSHE_NOT_BUILT_IN, /* 5 feature not present in lib */ + CURLSHE_LAST /* never use */ +} CURLSHcode; + +typedef enum { + CURLSHOPT_NONE, /* don't use */ + CURLSHOPT_SHARE, /* specify a data type to share */ + CURLSHOPT_UNSHARE, /* specify which data type to stop sharing */ + CURLSHOPT_LOCKFUNC, /* pass in a 'curl_lock_function' pointer */ + CURLSHOPT_UNLOCKFUNC, /* pass in a 'curl_unlock_function' pointer */ + CURLSHOPT_USERDATA, /* pass in a user data pointer used in the lock/unlock + callback functions */ + CURLSHOPT_LAST /* never use */ +} CURLSHoption; + +CURL_EXTERN CURLSH *curl_share_init(void); +CURL_EXTERN CURLSHcode curl_share_setopt(CURLSH *, CURLSHoption option, ...); +CURL_EXTERN CURLSHcode curl_share_cleanup(CURLSH *); + +/**************************************************************************** + * Structures for querying information about the curl library at runtime. + */ + +typedef enum { + CURLVERSION_FIRST, + CURLVERSION_SECOND, + CURLVERSION_THIRD, + CURLVERSION_FOURTH, + CURLVERSION_FIFTH, + CURLVERSION_SIXTH, + CURLVERSION_SEVENTH, + CURLVERSION_EIGHTH, + CURLVERSION_NINTH, + CURLVERSION_TENTH, + CURLVERSION_LAST /* never actually use this */ +} CURLversion; + +/* The 'CURLVERSION_NOW' is the symbolic name meant to be used by + basically all programs ever that want to get version information. It is + meant to be a built-in version number for what kind of struct the caller + expects. If the struct ever changes, we redefine the NOW to another enum + from above. */ +#define CURLVERSION_NOW CURLVERSION_TENTH + +struct curl_version_info_data { + CURLversion age; /* age of the returned struct */ + const char *version; /* LIBCURL_VERSION */ + unsigned int version_num; /* LIBCURL_VERSION_NUM */ + const char *host; /* OS/host/cpu/machine when configured */ + int features; /* bitmask, see defines below */ + const char *ssl_version; /* human readable string */ + long ssl_version_num; /* not used anymore, always 0 */ + const char *libz_version; /* human readable string */ + /* protocols is terminated by an entry with a NULL protoname */ + const char * const *protocols; + + /* The fields below this were added in CURLVERSION_SECOND */ + const char *ares; + int ares_num; + + /* This field was added in CURLVERSION_THIRD */ + const char *libidn; + + /* These field were added in CURLVERSION_FOURTH */ + + /* Same as '_libiconv_version' if built with HAVE_ICONV */ + int iconv_ver_num; + + const char *libssh_version; /* human readable string */ + + /* These fields were added in CURLVERSION_FIFTH */ + unsigned int brotli_ver_num; /* Numeric Brotli version + (MAJOR << 24) | (MINOR << 12) | PATCH */ + const char *brotli_version; /* human readable string. */ + + /* These fields were added in CURLVERSION_SIXTH */ + unsigned int nghttp2_ver_num; /* Numeric nghttp2 version + (MAJOR << 16) | (MINOR << 8) | PATCH */ + const char *nghttp2_version; /* human readable string. */ + const char *quic_version; /* human readable quic (+ HTTP/3) library + + version or NULL */ + + /* These fields were added in CURLVERSION_SEVENTH */ + const char *cainfo; /* the built-in default CURLOPT_CAINFO, might + be NULL */ + const char *capath; /* the built-in default CURLOPT_CAPATH, might + be NULL */ + + /* These fields were added in CURLVERSION_EIGHTH */ + unsigned int zstd_ver_num; /* Numeric Zstd version + (MAJOR << 24) | (MINOR << 12) | PATCH */ + const char *zstd_version; /* human readable string. */ + + /* These fields were added in CURLVERSION_NINTH */ + const char *hyper_version; /* human readable string. */ + + /* These fields were added in CURLVERSION_TENTH */ + const char *gsasl_version; /* human readable string. */ +}; +typedef struct curl_version_info_data curl_version_info_data; + +#define CURL_VERSION_IPV6 (1<<0) /* IPv6-enabled */ +#define CURL_VERSION_KERBEROS4 (1<<1) /* Kerberos V4 auth is supported + (deprecated) */ +#define CURL_VERSION_SSL (1<<2) /* SSL options are present */ +#define CURL_VERSION_LIBZ (1<<3) /* libz features are present */ +#define CURL_VERSION_NTLM (1<<4) /* NTLM auth is supported */ +#define CURL_VERSION_GSSNEGOTIATE (1<<5) /* Negotiate auth is supported + (deprecated) */ +#define CURL_VERSION_DEBUG (1<<6) /* Built with debug capabilities */ +#define CURL_VERSION_ASYNCHDNS (1<<7) /* Asynchronous DNS resolves */ +#define CURL_VERSION_SPNEGO (1<<8) /* SPNEGO auth is supported */ +#define CURL_VERSION_LARGEFILE (1<<9) /* Supports files larger than 2GB */ +#define CURL_VERSION_IDN (1<<10) /* Internationized Domain Names are + supported */ +#define CURL_VERSION_SSPI (1<<11) /* Built against Windows SSPI */ +#define CURL_VERSION_CONV (1<<12) /* Character conversions supported */ +#define CURL_VERSION_CURLDEBUG (1<<13) /* Debug memory tracking supported */ +#define CURL_VERSION_TLSAUTH_SRP (1<<14) /* TLS-SRP auth is supported */ +#define CURL_VERSION_NTLM_WB (1<<15) /* NTLM delegation to winbind helper + is supported */ +#define CURL_VERSION_HTTP2 (1<<16) /* HTTP2 support built-in */ +#define CURL_VERSION_GSSAPI (1<<17) /* Built against a GSS-API library */ +#define CURL_VERSION_KERBEROS5 (1<<18) /* Kerberos V5 auth is supported */ +#define CURL_VERSION_UNIX_SOCKETS (1<<19) /* Unix domain sockets support */ +#define CURL_VERSION_PSL (1<<20) /* Mozilla's Public Suffix List, used + for cookie domain verification */ +#define CURL_VERSION_HTTPS_PROXY (1<<21) /* HTTPS-proxy support built-in */ +#define CURL_VERSION_MULTI_SSL (1<<22) /* Multiple SSL backends available */ +#define CURL_VERSION_BROTLI (1<<23) /* Brotli features are present. */ +#define CURL_VERSION_ALTSVC (1<<24) /* Alt-Svc handling built-in */ +#define CURL_VERSION_HTTP3 (1<<25) /* HTTP3 support built-in */ +#define CURL_VERSION_ZSTD (1<<26) /* zstd features are present */ +#define CURL_VERSION_UNICODE (1<<27) /* Unicode support on Windows */ +#define CURL_VERSION_HSTS (1<<28) /* HSTS is supported */ +#define CURL_VERSION_GSASL (1<<29) /* libgsasl is supported */ + + /* + * NAME curl_version_info() + * + * DESCRIPTION + * + * This function returns a pointer to a static copy of the version info + * struct. See above. + */ +CURL_EXTERN curl_version_info_data *curl_version_info(CURLversion); + +/* + * NAME curl_easy_strerror() + * + * DESCRIPTION + * + * The curl_easy_strerror function may be used to turn a CURLcode value + * into the equivalent human readable error string. This is useful + * for printing meaningful error messages. + */ +CURL_EXTERN const char *curl_easy_strerror(CURLcode); + +/* + * NAME curl_share_strerror() + * + * DESCRIPTION + * + * The curl_share_strerror function may be used to turn a CURLSHcode value + * into the equivalent human readable error string. This is useful + * for printing meaningful error messages. + */ +CURL_EXTERN const char *curl_share_strerror(CURLSHcode); + +/* + * NAME curl_easy_pause() + * + * DESCRIPTION + * + * The curl_easy_pause function pauses or unpauses transfers. Select the new + * state by setting the bitmask, use the convenience defines below. + * + */ +CURL_EXTERN CURLcode curl_easy_pause(CURL *handle, int bitmask); + +#define CURLPAUSE_RECV (1<<0) +#define CURLPAUSE_RECV_CONT (0) + +#define CURLPAUSE_SEND (1<<2) +#define CURLPAUSE_SEND_CONT (0) + +#define CURLPAUSE_ALL (CURLPAUSE_RECV|CURLPAUSE_SEND) +#define CURLPAUSE_CONT (CURLPAUSE_RECV_CONT|CURLPAUSE_SEND_CONT) + +#ifdef __cplusplus +} +#endif + +/* unfortunately, the easy.h and multi.h include files need options and info + stuff before they can be included! */ +#include "easy.h" /* nothing in curl is fun without the easy stuff */ +#include "multi.h" +#include "urlapi.h" +#include "options.h" + +/* the typechecker doesn't work in C++ (yet) */ +#if defined(__GNUC__) && defined(__GNUC_MINOR__) && \ + ((__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 3)) && \ + !defined(__cplusplus) && !defined(CURL_DISABLE_TYPECHECK) +#include "typecheck-gcc.h" +#else +#if defined(__STDC__) && (__STDC__ >= 1) +/* This preprocessor magic that replaces a call with the exact same call is + only done to make sure application authors pass exactly three arguments + to these functions. */ +#define curl_easy_setopt(handle,opt,param) curl_easy_setopt(handle,opt,param) +#define curl_easy_getinfo(handle,info,arg) curl_easy_getinfo(handle,info,arg) +#define curl_share_setopt(share,opt,param) curl_share_setopt(share,opt,param) +#define curl_multi_setopt(handle,opt,param) curl_multi_setopt(handle,opt,param) +#endif /* __STDC__ >= 1 */ +#endif /* gcc >= 4.3 && !__cplusplus */ + +#endif /* CURLINC_CURL_H */ |